Search Results

Search found 1991 results on 80 pages for 'sweet tv'.

Page 5/80 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Laptop connected to my TV via HDMI assistance

    - by A New Guy
    I need some assistance with my Laptop connected to my TV through HDMI. I have a Asus G73SW Laptop with an Nvidia -Geforce GTX 460M Cuda 1gb I am a ubuntu novice and i need some assistance (hand holding sadly required) I have the recommended drivers, when i used the thumb drive OS to install it was displayed on my tv. After installation i lost the ability to connect to the TV. Any one else with this issue please advise. Thanks again ~ A new Guy

    Read the article

  • HDMI signal interrputs after 10 minutes plugged in a TV

    - by desert_unbound
    Ubuntu 11.10, Dell Inspiron N4050, VLC, Jupiter I'm trying to watch movies through HDMI output on a TV, with VLC, with the notebook unplugged from AC (but with enough battery for 2-3 hours of use), just with TV display (the notebook display stays off) And from 10 to 10 minutes, the TV turns black, and according to the TV, the HDMI cable is unplugged. But using the touchpad makes the screen appear again. In "screen" options, on system settings, i've set the screen to never turn off, and never reduce brightness using battery. In "power" settings, i've set to not suspend when using battery. In Jupiter, i've set (while trying to watch the movie) to work in maximum performance. I'm pretty sure it's not VLC, because i've set it to override power options and screensaver options (and also im not using xscreensaver). Also the movie continues, when the screen is black Maybe there's something that i'm missing? When i plug the HDMI in the notebook, i use jupiter to change the display (using the option "external display only")... maybe is that ?

    Read the article

  • 1080p on TV not working

    - by and471
    I am trying to connect my laptop (Samsung Series 5 Ultrabook) to my TV (Toshiba WLT66/67 Series) and get it to output to the TV at 1080i (so basically 1920x1080) through HDMI The issue I have is that in 'Displays' the highest resolution that it gives the monitor is 1280x768, however I know that the TV can output at 1920x1080 at 30Hz as when I use Windows 7 it allows me to do this. I looked around and found that I could use xrandr to try and get his resolution, however when I do: cvt 1920 1080 30 # 1920x1080 29.95 Hz (CVT) hsync: 33.01 kHz; pclk: 79.75 MHz Modeline "1920x1080_30.00" 79.75 1920 1976 2168 2416 1080 1083 1088 1102 -hsync +vsync xrandr --newmode "1920x1080_30.00" 79.75 1920 1976 2168 2416 1080 1083 1088 1102 -hsync +vsync xrandr --addmode HDMI1 1920x1080_30.00 xrandr --output HDMI1 --mode 1920x1080_30.00 My TV screen just remains blank :( Any help? (if you need any more information please ask)

    Read the article

  • Multiple apks, single listing of app for Google TV and Android Phone/Tablet

    - by Yash
    I have an Android phone/tablet apk which is currently in Play store and has these settings in its manifest file: package="com.company.xyz" android:versionCode="0803010008" android:versionName="01.00.08" > <uses-sdk android:minSdkVersion="8" android:targetSdkVersion="8" /> <uses-permission android:name="android.permission.INTERNET" /> <uses-permission android:name="android.permission.ACCESS_NETWORK_STATE" /> <uses-permission android:name="android.permission.RECEIVE_BOOT_COMPLETED" /> <uses-permission android:name="android.permission.WAKE_LOCK" /> <uses-library android:name="com.adobe.flashplayer" android:required="true" /> <supports-screens android:anyDensity="true" android:largeScreens="true" android:normalScreens="true" android:smallScreens="false" android:xlargeScreens="true" /> <uses-feature android:name="android.hardware.touchscreen" android:required="true" /> I had uploaded another apk for GoogleTV which has the same package name com.company.xyz as the previous apk and has the following settings in its manifest file: package="com.company.xyz" android:versionCode="1203010001" android:versionName="01.00.01" > <uses-sdk android:minSdkVersion="12" android:targetSdkVersion="12" /> <uses-permission android:name="android.permission.INTERNET" /> <uses-permission android:name="android.permission.ACCESS_NETWORK_STATE" /> <uses-permission android:name="android.permission.WAKE_LOCK" /> <uses-feature android:name="android.hardware.touchscreen" android:required="false" /> <uses-feature android:name="com.google.android.tv" android:required="true" /> <supports-screens android:largeScreens="true"/> <uses-configuration android:reqFiveWayNav="true" /> The Google TV apk never showed up on Play Store on GTV boxes, so I updated its manifest with the settings below and with everything else remaining the same package="com.company.xyz" android:versionCode="1203010002" android:versionName="01.00.02" > <supports-screens android:largeScreens="true" android:normalScreens="false" android:smallScreens="false" android:xlargeScreens="false" /> At this point, I am unable to save the app because of the Play Store error "Error: New APK version is lower than previous APK version" even though the GoogleTV apk has a higher version code than the Phone/Tablet version. Does anyone have a solution for this? Thanks!

    Read the article

  • Help: Best way to do a TV-out in 7300GT Nvidia video card?

    - by Martin Ongtangco
    I'm planning to recycle my old PC and build a Media Center using an open-source (C#) software called MediaPortal. My old PC has a GeForce 7300GT with a TV-out plug built-in. When I tested it last night, it wouldn't detect my JVC tv (CRT) using the current drivers. I even purchased a new copper-based TV-Out to RCA cable. I searched all 3 AV channels. The video card has 3 output ports: 2 DVI & 1 s-video. I used the s-video with a S-Video to RCA out cable. I swapped between PAL & NTSC So what I did was I downloaded the first version of an Nvidia driver for 7 series cards, but still even with the old console, it couldn't detect the TV. I'm running out of viable ideas. Anyone here had the same problem and fixed it? Any suggestion is appreciated. Thank you!

    Read the article

  • How do I watch youtube on my TV using a netbook?

    - by couchpotato
    I'm based in the UK. I'd like to watch iplayer, 4od, youtube etc on my TV. I've looked at the Roku box, but as far as I can gather this doesn't support youtube or 4od. I don't have cable in my area and don't want to go with Sky. What options do I have, if any? UPDATE My TV has an HDMI connection. If a netbook is the best or only way to do this, which one would you recommend for connecting to my TV?

    Read the article

  • Samsung TV Emulator font size

    - by jperovic
    Can someone please help me with this issue. I've been banging my head to find the solution but no help... The problem is that Samsung TV Emulator displays everything enlarged (line font-size 30ish pixels) and there does seem to have a way to override it. This only happens within Samsung UI components. To make sure it wasn't something with my project I've downloaded sample project from Brightcove: Sample project but noticed the same behavior with that as well. Here is the screenshot of my "project". It only one scene with two UI components: http://tinypic.com/r/124evqc/6 Opposed to that, here's what I see in my IDE view: http://tinypic.com/r/ezmn4l/6. As a side-note, I had to put height: 20px in both of my UI components' CSS in order for IDE to show them that way. Can anyone suggest what am I supposed to do?

    Read the article

  • Remotely Schedule and Stream Recorded TV in Windows 7 Media Center

    - by DigitalGeekery
    Have you ever been away from home and suddenly realized you forgot to record your favorite program? Now Windows 7 Media Center, users can schedule recordings remotely from their phones or mobile devices with Remote Potato. How it Works Remote Potato installs server software on the host computer running Windows 7 Media Center. Once the software is installed, we’ll need to do some port forwarding on the router and setup an optional dynamic DNS address. When setup is completed, we will access the application through a web based interface. Silverlight is required for Streaming recorded TV, but scheduling recordings can be done through an HTML interface. Installing Remote Potato Download and install Remote Potato on the Media Center PC. (See download link below) If you plan to stream any Recorded TV, you’ll also want to install the streaming pack located on the same page. It isn’t required to stream all shows, only shows that require the AC3 audio codec. Click Yes to allow Remote Potato to add rules to the Windows Firewall for remote access. You’ll likely need to accept a few UAC prompts. When notified that the rules were added, click OK. Remote Potato will then prompt you to allow administrator privileges to reserve a URL for it’s web server. Click Yes. Remote Potato server will start. Click on the configuration button at the right to to reveal the settings tabs.   One the General tab, you’ll have the option to run Remote Potato on startup and minimized in the System Tray. If you’re running Media Center on a dedicated HTPC, you’ll probably want to enable both startup options. Forwarding Ports on Your Router You’ll need to forward a couple ports on your router. By default, these will be ports 9080 and 9081. In this example we’re using a Linksys WRT54GL router, however, the steps for port forwarding will vary from router to router. On the Linksys configuration page, click on the Applications & Gaming Tab, and then the Port Range Forward tab. Under Application, type in a name of your choosing. In both the Start and End boxes, type the port number 9080. Enter the local IP address of your Media Center computer in the IP address column. Click the check box under Enable. Repeat the process on the next line, but this time use port 9081. When finished, click the Save Settings button. Note: It’s highly recommended that you configure the home computer running Media Center & Remote Potato with a static IP address.   Find your IP Address You’ll need to find the IP address assigned to your router from your ISP. There are many ways to do this but a quick and easy way is to visit a site like checkip.dyndns.org (link available below) The current external IP address of your router will be displayed in the browser.   Dynamic DNS This is an optional step, but  it’s highly recommended. Many routers, such as the Linksys WRT54GL we are using, support Dynamic DNS (DDNS). What Dynamic DNS allows you to do is affiliate your home router’s external IP address to a domain name. Every time your home router is assigned a a new IP address by your ISP, the domain name is updated to point to your new IP address. Remote Potato’s user interface is accessed over the Internet is by connecting to your router’s IP address followed by a colon and the port number. (Ex: XXX.XXX.XXX.XXX:9080) Instead of constantly having to look up and remember an IP address, you can use DDNS along with a 3rd party provider like DynDNS.com, to sign up for a free domain name and configure it to be updated each time your router is assigned a new IP address. Go to the DynDNS.com website (See link at the end of the article) and sign up for a free Domain name. You’ll need to register and confirm by email.   Once you’ve signed in and selected your domain name click Activate Services. You’ll get a confirmation message that your domain name has been activated.    On the Linksys WRT54GL click on the Setup tab an then DDNS. Select DynDNS.org, or TZO.com if you prefer to use their service, from the drop down list.   With DynDNS, you’ll need to fill in your username and password you signed up with at the DynDNS website and the hostname you chose. Note: You can connect over your local network with the IP Address of the computer running Remote Potato followed by a colon and the port number. Ex: 192.168.1.2:9080 Logging in Remote Potato and Recording a Show Once you connect, you’ll see the start page. To view the TV listings, click on TV Guide. You’ll then see your guide listings. There are a few ways to navigate the listings. At the top left, you can click on any of the preset time buttons to jump to  the listings at that time of the day.  Click on the arrows to the right and left of the day and date at the top center to proceed to the previous or next day. Or, jump to a specific day with the date and date buttons at the top right.   To setup a recording, click on a program.   You can choose to record the individual show or the entire series by clicking on Record Show or Record Series.   Remote Potato on Mobile Devices Perhaps the coolest feature of Remote Potato is the ability to schedule recording from your phone or mobile device. Note: For any devices or computers without Silverlight, you will be prompted to view the HTML page. Select Browse Listings. Select your program to record. In the Program Details, select Record Show to record the single episode or Record Series to record all instances of the series. You will then see a red dot on the program listing to indicate that the show is scheduled for recording.   Streaming Recorded TV Click on Recorded TV from the home screen to access your previously recorded TV programs. Click on the selection you wish to stream. Click on Play. If you receive this error message, you’ll need to install the streaming pack for Remote Potato. This is found on the same download page as installation files. (See link below) The Begin from slider allows you to start playback from the start (by default) or a different time of the program by moving the slider. The Quality (bitrate) setting  allows you to choose the quality of the playback. We found the video quality on the Normal setting to be pretty lousy, and Low was just pointless. High was the best overall viewing experience as it provided smooth quality video playback. We experienced significant stuttering during playback using the Ultra High setting.   Click Start when you are ready to begin. When playback begins you’ll see a slider at the top right.   Move the slider left or right to increase or decrease the size of the video. There’s also a button to switch to full screen.   Media Center users who travel frequently or are always on the go will likely find Remote Potato to be a blessing. Since being released earlier this year, updates for Remote Potato have come fast and furious. The latest beta release includes support for streaming music and photos. If you like those nice network TV logos, check out our article on adding TV channel logos to Windows Media Center. Downloads and Links Download Remote Potato and Streaming Pack Find your IP address Sign Up for a Domain Name at DynDNS.com Similar Articles Productive Geek Tips Schedule Updates for Windows Media CenterUsing Netflix Watchnow in Windows Vista Media Center (Gmedia)Add a Sleep Timer to Windows 7 Media CenterStartup Customizations for Media Center in Windows 7Enable Media Streaming in Windows Home Server to Windows Media Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos

    Read the article

  • How do I get TV out working on an ATI X800 GTO²?

    - by Liran
    Is there any way to make my graphics card (ATI x800) work with tvout? I know there are no proprietary drivers for this card only the opensource ones. It uses this cable for video out: http://warningdang.dynalias.com/magento/media/catalog/product/cache/1/image/265x265/9df78eab33525d08d6e5fb8d27136e95/a/3/a31b_1.jpg Personally I use the yellow RCA for tvout (in windows). I hope there is a way to work it out because it's a really important feature for me and one of the only reasons I boot windows. Thanks ahead!

    Read the article

  • Using a sky card in Media Center

    - by Jonathan
    I'm not 100% is this SU suitable but oh well. I'm wondering if it's possible to get a slot of some kind to put my Sky Card into a Media Center PC and then be able to have a triple or dual tuner, and connect to the satelitte dish, allowing me to record 3 and watch a previously recorded. Also it would mean access to Youtube and things easily, with only one box. Also would this be legal or is it similar to Apple where you can only use Mac OSX on boxes with the Apple Logo on?

    Read the article

  • Alternative software for Pinnacle PCTV 100e

    - by Stijn Sanders
    I have a Pinnacle PCTV 100e external USB cable television receiver. I've been using Pinnacle's software that came with the card (TVCenter Pro) to record things at given times. Things I don't like is an extremely high CPU load, and that it doesn't seem to halt the screensaver from running when watching in full screen. Also, I was away the last two weeks, and the schedules went terribly bust. Some items were recorded hours before or after the actual scheduled time (and now I missed some shows), and some recurring schedules weren't converted into the next occurrence correctly! Is there good alternative software that would work with my PCTV 100e? (Preferalby cheap or free) I've tried VLC Player, which gets video, but no audio. I've tried MediaPortal, which crashes when trying to scan for channels. When I select a channel manually, the stored mpg has big errors in encoding and is also missing audio. There's VirtualDub, but that doesn't have ready-made scheduled-recording options. This I can conjure some scheduled scripts for, but I've noticed the sync gets awfully wrong after some time. I've tried Windows Media Center, but it doesn't seem to support the PCTV 100e.

    Read the article

  • Customer Concepts TV

    - by Richard Lefebvre
    Eliminate the Guesswork in Your Customer's Sales Organization Selling is the lifeblood of every business. In the past, companies would increase headcount to boost sales. In today’s business environment, companies need to re-evaluate the way in which they sell. Sales and marketing organisations must optimise performance, increase team productivity and focus on the best opportunities. Oracle Fusion CRM has been specifically designed with tools to help sales and marketing teams improve efficiency and drive revenue. Territory modeling and management, quota and commission management, collaborative features, real-time customer information and mobile device integration are just some features incorporated. Join us on Customer Concepts TV as we aim to help you find the right strategy for your prospect and customers. Whether they already have a CRM solution in place or are looking for the next level of CRM implementation, this online TV show will give you very practical advice that can help you to make the most out of your CRM implementation.Register now to reserve your spot for this exclusive, live-stream event. Customer Concepts TV comes to you on April 24. Watch the Customer Concepts TV trailer here

    Read the article

  • External TV only allows 640x480 using VGA cable

    - by EdC
    I have Ubuntu precise installed on a MacBook Pro. When connecting to an external television using a VGA style cable the highest resolution available seems to be 640x480. I'm using the proprietary NVIDEA Accelerated Graphics Driver (version current) and attempting to setup the TV using the nvidea-settings tool. I know all the equipment supports higher resolutions because of the following: Prior to rebuilding my machine with precise, the same TV, cabel & adapter gave higher resolutions The same machine & TV when used with a HDMI cable allows higher resolutions Windows laptops with the same cable & TV are able to achieve higher resolutions I'm not sure what to look for next, there are some similar FAQ questions but I'm not sufficiently familiar with the areas involved to know if these are my issue or are safe to try. Specifically: colord problem & my monitor resolution 640*480 with no other options! - is the closest, but as I'm having no problems with the main laptop monitor I'm not sure the described symptoms apply. I can't work out from the answer or Bumblebee site how to determine if nvidia optimus applies to my laptop. Why isn't my monitor's native resolution appearing as an option? - suggests configuring X by hand, but doesn't entirely match the symptoms I'm seeing

    Read the article

  • Ask How-To Geek: Dropbox in the Start Menu, Understanding Symlinks, and Ripping TV Series DVDs

    - by Jason Fitzpatrick
    This week we take a look at how to incorporate Dropbox into your Windows Start Menu, understanding and using symbolic links, and how to rip your TV series DVDs right to unique and high-quality episode files. Once a week we dip into our reader mailbag and help readers solve their problems, sharing the useful solutions with you in the process. Read on to see our fixes for this week’s reader dilemmas. Add Drobox to Your Start Menu Dear How-To Geek, I use Dropbox all the time and would like to add it right onto my start menu along side the other major shortcuts like Documents, Pictures, etc. It seems like adding Dropbox into the menu should be part of the Dropbox installation package! Sincerely, Dropboxing in Des Moines Dear Dropboxing, We agree, it would be a nice installation option. As it stands you’re going to have to do a little simple hacking to get Dropbox nestled neatly into your start menu. The hack isn’t super elegant but when you’re done you’ll have the link you want and it’ll look like it was there all along. Check out this step-by-step guide here in order to take an existing Library shortcut and rework it to be a Dropbox link. Understanding and Using Symbolic Links Dear How-To Geek, I was talking to a coworker the other day about an issue I’d been having with a media center application I’m running. He suggested using symbolic links to better organize my media and make it easier for the application to access my collection. I had no idea what he was talking about and never got a chance to bug him about it later. Can you clear up this whole symbolic links business for me? I’ve been using computers for years and I’ve never even heard of it! Sincerely, Symbolic Who? Dear Symbolic, Symbolic links aren’t commonly used by many Windows users which is why you likely haven’t run into the concept. Symbolic links are essentially supercharged shortcuts—the newly introduced Windows library system is really just a type of symbolic link system. You can use symbolic links to do all sorts of neat stuff like link folders to your Dropbox folder, organize media, and more. The concept of symbolic links is pretty simple but the execution can be really tricky. We’d suggest reading over our guide to creating symbolic links in Windows 7, Windows XP, and Ubunutu to get a clearer idea what you’re getting into. Rip Your TV DVDs into Handy Episode Files Dear How-To Geek, My wife got me an iPod for Christmas and I still haven’t got around to filling it up. I have tons of entire TV show seasons on DVD and would like to get them on the iPod but I have absolutely no idea where to start. How do I get the shows off the discs? I thought it would be as easy to import the TV shows into iTunes as it is to import tracks off a CD but I was totally wrong. I tried downloading some applications to rip them but those didn’t work at all. Very frustrating! Surely there is an easy and/or automated way to do this, right? Sincerely, Free My DVDs Dear DVDs, Oh man is this a frustration we can relate to. It’s inordinately difficult to get movies and TV shows off physical media and into digital (and portable media player-friendly) formats. There are a multitude of ways to rip DVDs and quite a few applications out there (some good, some mediocre, and some outright malware). We’d recommend a two-part punch to solve your ripping woes. You’ll need a copy of DVDFab to strip away the protections on the discs and rip the disc and Handbrake to load the disc image and convert the files. It’s not quite as smooth as the CD-to-iTunes workflow but it’s still pretty easy. Check out all the steps and settings you’ll want to toggle here. Have a question you want to put before the How-To Geek staff? Shoot us an email at [email protected] and then keep an eye out for a solution in the Ask How-To Geek column. Latest Features How-To Geek ETC Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines Google’s New Personal Blocklist Extension Kills Search Engine Spam KeyCounter Tracks Your Keystrokes and Mouse Clicks Add Custom LED Ambient Lighting to Your PC or Media Center The Trackor Monitors Amazon Prices; Integrates with Chrome, Firefox, and Safari Four Awesome TRON Legacy Themes for Chrome and Iron Anger is Illogical – Old School Style Instructional Video [Star Trek Mashup]

    Read the article

  • 3 monitors + a TV on a single card with Eyefinity?

    - by Paul Accisano
    Greetings all, Right now I have a fairly standard video card with 2 DVI ports, one powering my single monitor and another powering my HDTV (with a DVI-to-HDMI cable), which are in separate rooms. I never need to have my monitor and TV active at the same time. I'm looking into a possible computer upgrade. I'd like to know if the following situation is possible. I want three monitors on my desk powered by a single card, which I hear these new Eyefinity cards are capable of. But, I also want my TV hooked up. At any given time, I would want either my three monitors active or my TV active, never both at once. So it seems to me it might be possible to do this all a single 3-port card with a splitter of some kind. Is this possible? What hardware would I need? Thanks!

    Read the article

  • How can I stop my laptop display from flickering when I connect my TV?

    - by Lord Torgamus
    I have a laptop with an HDMI output port running Vista, and an HDTV with HDMI input ports. The laptop is set to extend its desktop onto a second monitor. When I connect the computer to the TV with an HDMI cable, my laptop screen usually flickers rapidly. Most of the time it lasts for about 30 seconds, but sometimes it lasts for several minutes and once in a while it doesn't happen at all. It wouldn't be so bad except that the cursor moves back to the center of the laptop screen with each flicker, so I can't really do anything until the machine decides it's ready to calm down. I haven't been able to find any pattern at all for the causes or duration of the flickering. It doesn't seem to matter what programs the laptop is running when I connect it to the TV, whether I enable the extended display before or after I connect the TV or which HDMI port/cable I use. What could be causing this, and how can I make it go away?

    Read the article

  • How to use MythBuntu to send TV signal to a 2nd frontend

    - by Mark Preston
    I guess the a MythTV or MythBuntu backend acts as a "server" for the frontends. I have MythBuntu installed. It runs fine, I can tune live TV, hear the sound, etc. To get this to work, I had to config the Wired Network IP4V settings to Method: Link-Local Only. The Local Backend IP address is: 127.0.0.1 and the info (bottom of screen) says that if there is another frontend, that this IP add. must be changed. 1 - Does this mean changed to the IP address of the 2nd frontend? 2 - What "Method" do I use to make 2 or more frontends? 3 - I have an ethernet switch which currently "sees" the tv signal, sends it to the computer's ethernet port where Mythbuntu makes use of it. 4 - How do I set up the Myth to send it's output (the tv shows) to both televisions? If you know of a How-To, or website, please give the URL or identifying keywords.

    Read the article

  • Cutting the Cable: The State of Internet-based TV [Infographic]

    - by Jason Fitzpatrick
    If you’ve been turning your cable box on less and watching more shows online, you’re certainly not alone. Check out this infographic look at the state of TV distribution in the digital age to see how everyone is getting their TV fix. People are watching more media online, less from traditional distribution channels, and in a more mobile and selective way than ever before. Hit up the link below to check out the full infographic with a shake down of how media consumption has shifted and who is jockeying for a slice of the consumers’ attention. Cutting the Cable: The State of Internet-based TV [Daily Infographic] How to Enable Google Chrome’s Secret Gold IconHow to Create an Easy Pixel Art Avatar in Photoshop or GIMPInternet Explorer 9 Released: Here’s What You Need To Know

    Read the article

  • No Sound via HDMI

    - by Goony Hill
    I have ubuntu installed on a Acer aspire revo 3700 intel atom processor with nvidia ion graphics this is plugged into a celcus 32 inch TV via HDMI (1080p). The video driver shows as an nvidia which I can select. I have set the sound to play via HDMI and the output to HDMI but get no sound. I have tried a sony 1080i TV with the box but get eratic results with the graphics, but the sound picks up straight away that is there is no need to select it. The graphics on the celcus TV work but I get a dialog box showing loads of different resolutions and frequencies which I have to close manually, these appear to be attempts to set different resolutions for the TV. Am I missing some sort of screen/sound driver, if so does anyone know what might support the celcus 32 inch (1080p) tv?

    Read the article

  • TechDays TV : la Catch TV gratuite des TechDays 2011 pour revivre les moments forts du rendez-vous des professionnels informatiques

    TechDays TV : la Catch TV gratuite des TechDays 2011 Pour revivre les moments forts du rendez?vous des professionnels informatiques de Microsoft La cinquième édition des TechDays, l'évènement de Microsoft réunissant les développeurs, professionnels et décideurs IT, s'est achevée la semaine dernière. Cette édition a été marquée par une actualité riche et de nombreuses innovations. TechDays TV permettait ainsi aux personnes n'ayant pas eu l'occasion de se rendre sur place d'assister à plusieurs sessions et de suivre l'événement en direct. Aujourd'hui, Microsoft propose la rediffusion intégrale et gratuite des contenus de cette WebTV (conférences plénières, sélections des meil...

    Read the article

  • PC -> TV HDMI suddenly doesn't work, any other option does

    - by XSlicer
    So my parents wanted to connect their PC to their TV, so they bought a 10m (35 ft) cable. It all worked perfectly. Then my mom tripped over the cable, breaking it. She somehow got a free replacement, but at the same time some more expensive one from an uncle. Now the problem is that this suddenly doesn't work anymore (TV saying "Format not supported"). I've tried several other things to pinpoint the actual problem, but none brought me something conslusive: PC (hdmi) to TV doesn't work (both cables) PC (hdmi) to TV doesn't work (short cable) Laptop (hdmi) to TV work (same cables) BluRay (hdmi) to TV works (same cables) PC (hdmi) to monitor works (same cables) PC (DVI w/ adapter HDMI) to TV works (same cables) I've tried different ports, tried Linux, reinstalling drivers (the graphics card is internal using an i5 sandy bridge. Normally it's running Windows 7 Home Prem, the TV being a Philips 37PFL7605H). So basically, everything works, except that thing what we want. The only things I am thinking of is that the sound is interfering or that the HDMI-output is somehow broken. Or is it anything else? I'm kind of lost.

    Read the article

  • I'm making a simulated tv

    - by Jam
    I need to make a tv that shows the user the channel and the volume, and shows whether or not the television is on. I have the majority of the code made, but for some reason the channels won't switch. I'm fairly unfamiliar with how properties work, and I think that's what my problem here is. Help please. class Television(object): def __init__(self, __channel=1, volume=1, is_on=0): self.__channel=__channel self.volume=volume self.is_on=is_on def __str__(self): if self.is_on==1: print "The tv is on" print self.__channel print self.volume else: print "The television is off." def toggle_power(self): if self.is_on==1: self.is_on=0 return self.is_on if self.is_on==0: self.is_on=1 return self.is_on def get_channel(self): return channel def set_channel(self, choice): if self.is_on==1: if choice>=0 and choice<=499: channel=self.__channel else: print "Invalid channel!" else: print "The television isn't on!" channel=property(get_channel, set_channel) def raise_volume(self, up=1): if self.is_on==1: self.volume+=up if self.volume>=10: self.volume=10 print "Max volume!" else: print "The television isn't on!" def lower_volume(self, down=1): if self.is_on==1: self.volume-=down if self.volume<=0: self.volume=0 print "Muted!" else: print "The television isn't on!" def main(): tv=Television() choice=None while choice!="0": print \ """ Television 0 - Exit 1 - Toggle Power 2 - Change Channel 3 - Raise Volume 4 - Lower Volume """ choice=raw_input("Choice: ") print if choice=="0": print "Good-bye." elif choice=="1": tv.toggle_power() tv.__str__() elif choice=="2": change=raw_input("What would you like to change the channel to?") tv.set_channel(change) tv.__str__() elif choice=="3": tv.raise_volume() tv.__str__() elif choice=="4": tv.lower_volume() tv.__str__() else: print "\nSorry, but", choice, "isn't a valid choice." main() raw_input("Press enter to exit.")

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >