Search Results

Search found 154 results on 7 pages for 'wep'.

Page 5/7 | < Previous Page | 1 2 3 4 5 6 7  | Next Page >

• need help upgrading small business wifi network

  - by Henry Jackson

  Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

  Read the article

• need help upgrading small business wifi network

  - by Henry Jackson

  Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

  Read the article

• need help upgrading small business wifi network

  - by Henry Jackson

  Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

  Read the article

• What is the correct root file to import to aptana from an xampp folder/existing web app or git repository?

  - by gaff

  Very noob question - all of this is new to me - not really sure how to get started. Overview: I'm taking over an existing wep project that has been developed in aptana and deployed in xampp setup - I also have access to Git repository on local directory. I want to import the web application into aptana, run it and begin updating/editing - bit of steep learning curve for me What is the best way to import? And what should I import? What should it look like in aptanan? I tried importing what I think is the root file from the git folder ("existing folder as new project")- it contains things like css, doc, img and js. This looks right to me - but might not be. Thanks, Gaff

  Read the article

• How to troubleshoot problems sharing internet connection via WiFi on Mac OS X

  - by sprugman

  I'm at a hotel, plugged into their network via ethernet on my MacBook. I want to share the connection via wifi to two other computers. I went to Prefs Sharing and set up internet sharing. I know it's working because my friend with a Mac access the net fine. My friend with the PC can see the network, but can't connect to it. In the sharing prefs, airport options, I chose these options: Channel: Automatic Enable encryption: yes WEP Key length 40-bit password length: 5 chars (as specified in the instructional text) Update: I tried it with encryption turned off, and it works. Of course, I'd rather not do that... Any ideas?

  Read the article

• My laptop can connect to every wireless network except fios

  - by going crazy

  I have always been able to connect to every wireless router secured or unsecured wep or wpa. I had Fios installed and could not connect. Verizon suggested it was my computer and gave me an outside wirless drive to use, it worked. I got rid of fios and went back to comcast and threw out the drive, but now 2 years later, I am sitting at my friends house haveing the same problem. My tech savy friend told me it is a firewall setting or something in my antivirus software, but I disabled them both and still nothing works........Funny it is only FIOS

  Read the article

• Windows 7/8 can't connect to an N Router

  - by xenoterracide

  I have a router running OpenWRT backfire, with N and A/B/G being broadcast. A linux laptop, and a Mac laptop can see the N network and connect to it (or at least they could last weekend). But there is now a Windows 7 Desktop with a B/G/N wireless card, and a Windows 8 Laptop with a B/G/N wireless card that can't see the N network only the B/G broadcast. The B/G and N have different SSID's and Encryption ( WEP and WPA2 PSK respectively ). The N SSID isn't even visible. Does anyone have any suggestions as to how to troubleshoot further? Or what might be the cause? update wireless info Desktop Dell Wireless 1502 802.11b/g/n Atheros Communications Inc 9.2.0.412

  Read the article

• internet sharing over wifi between ubuntu 11.10 and windows7

  - by Vivek Pradhan

  So i have looked up a lot of forums for these solution but haven't really found one that works. I have a laptop running ubuntu 11.10 connected to the ethernet cord at home and i want to share the internet over wifi with my friend's laptop running windows7. I did not think it would be so difficult, I tried a lot of things: I went to networks and then wireless and set up a wifi hotspot, my laptop got connected to it and the ipv4 was set to "shared to other computers". Thankfully the network was discoverable and after some tries my friend was able to connect to the network, but it still showed that there was no internet access. I tried coniguring the tcp addresses of the wifi on his laptop. Bottom line: did not work. I went to the network manager, clicked on create a new wireless network, created one with security WEP 40/128 bit passphrase, tried the other 2 options later, and did the same thing as with the wifi, this network was also not discoverable initially and after some tries, we could connect to it but then ICS was not working although there was a working internet on my ubuntu laptop. I would really appreciate if some one who has faced a similar problem and got it fixed to please give me a step by step solution of how to get this work, because this is a prety common problem with ubuntu distros I have noticed. Note: This however seems to work with ubuntu to ubuntu connections, but specifically cross OS connections like windows or my phone running android ICS are not able to see or if connect not able to share internet on my laptop

  Read the article

• How to diagnose network speed drops

  - by Luis Alvarado

  Here is the image of System Monitor first: The graph shows the cycle the connection goes through. After 10 to 15 seconds it drops to 0 KB/S, then goes up to the Max speed (120 KB/S) then it repeats. dmesg shows the following during that time: [ 6066.757211] wlan0: send auth to 00:26:5a:b5:05:7b (try 1/3) [ 6066.804405] wlan0: authenticated [ 6066.804578] rt2800pci 0000:02:01.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 6066.805016] wlan0: associate with 00:26:5a:b5:05:7b (try 1/3) [ 6066.809218] wlan0: RX AssocResp from 00:26:5a:b5:05:7b (capab=0x431 status=0 aid=1) [ 6066.809581] wlan0: associated [ 6066.810203] bridge-eth0: disabling the bridge on dev down [ 6066.810239] bridge-eth0: down [ 6066.810254] bridge-eth0: detached [ 6066.810309] /dev/vmnet: open called by PID 1679 (vmnet-bridge) [ 6066.810322] /dev/vmnet: hub 0 does not exist, allocating memory. [ 6066.810355] /dev/vmnet: port on hub 0 successfully opened [ 6066.810366] bridge-wlan0: device is wireless, enabling SMAC [ 6066.810369] bridge-wlan0: up [ 6066.810372] bridge-wlan0: attached [ 6067.010285] userif-2: sent link down event. [ 6067.010290] userif-2: sent link up event. This also repeats with Wired or Wireless connections. How can I diagnose this changes in the network efficiently.

  Read the article

• How to disable "N" Wireless Mode RTL8192 (Thinkpad Edge 15 Core i5) in natty

  - by Gustavo Rubio

  I've seen many owners of thinkpad edges which are supossed to be linux-friendly having problems with wireless adapter. I've found several links inside askubuntu and in ubuntuforums which have a lot of work-arounds for those problems, mine seems to be wierd though. I use my laptop on both my office and at home. At home I have a router which is A/B/G and here at home the wireless connection works just fine, using a WEP key. But in work I have a B/G/N wireless router and it doesn't work, my guess is that this adapter works with N modes but somehow this is buggy in the bundled driver in natty. I've tried to disable the "N" mode in the router but that didn't work. Later I went to realtek website, downloaded their driver and compiled myself, kinda seems to work most of the time but sometimes some websites keep trying to load or load just parts of it and images start to look like their links are broken and so on, much like what you get when you were loading a page and suddenly the connection is lost. This problem, as I said, is only using the realtek driver from their website. Dmesg gives me this a lot of these: [ 5869.049454] rtl8192se_update_ratr_table: ratr_index=0 ratr_table=0x00000ff5 [ 5879.240563] DHCP pkt src port:68, dest port:67!! So I thougth I might as well switch back to the original driver which seems to work just fine on A/B/G wireless networks but not on N networks so if anybody knows how to disable that mode from within the driver please let us know :) Thanks in advance! PS: I do found a link to a similar question and it was answered but let me remind you I'm NOT using the intel version of wireless for my thinkpad but the realtek (RTL8192SvB)

  Read the article

• Dlink DWA-643 ExpressCard / Atheros AR5008 can't connect to wifi networks

  - by Justin Kelly

  I've just purchased a D-Link DWA-643 Xtreme N ExpressCard Notebook Adapter - but it can't connect to my wireless network The card is listed on the FSF website and - refer links below: http://www.fsf.org/resources/hw/index_html/net/wireless/index_html/cards.html http://www.dlink.com.au/products/?pid=550 Ubuntu see the card as using the Atheros AR5008 chipset - refer image below The card lights up and I can see that available wifi networks using this card - so it seems to 'just work' on ubuntu 12.04 but when i try and connect to my networks - it fails I've tried setting the network to all the different options (WEP, WPA2, no encryption, etc.. b/g/n ) but ubuntu sill cant connect to it I've also installed wicd but still couldn't connect Has anyone got a DWA-643 to work in Ubuntu? Or does anyone have any suggestion on how to get it to connect?? Any help would be greatly appreciated Note: the laptop has built in wifi but its broadcom, works but with dialup speed connection - and i've had nothign but trouble using the boardcom drivers so purchased the FSF recommended PCI expresscard as i hoped it would 'just work' on the latest Ubuntu i've have tried to disable the built in wifi - broadcom - but even with the broadcom uninstall and unavailable it didnt help the dlink to connect previously I had MAC address filtering on the router - i've added the dlinks MAC - and also disabled MAC address filtering - still no luck lspci output below: 18:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: D-Link System Inc Device 3a6f Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at e4000000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Kernel driver in use: ath9k Kernel modules: ath9k

  Read the article

• Can't connect to or see my wifi ssid

  - by ant

  Today I installed ubuntu 12.04 on my laptop. I am unable to see my home SSID or even connect to it. I've tried to connect as a hidden SSID but I always get prompted for authorization although my key is correct. I'm in in Europe but my laptop is from US. I'm not sure if that is relevant. I've read around this site and saw something that has to do with setting the channel above 11. I'm not sure I did that correctly I did this : How to use Wi-Fi channels above 11? Did't help. I'm able to connect with cable but not via wifi either windows or linux. Other devices in my home can connect without any issues, even the kindle. Here is the screenshot from my router : Here is some additional info : lspci | grep -i network 08:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) lspci -nnk | grep -A2 0280 08:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Hewlett-Packard Company U98Z062.10 802.11bgn Wireless Half-size Mini PCIe Card [103c:303f] Kernel driver in use: ath9k m-tool NetworkManager Tool State: connected (global) Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath9k State: disconnected Default: no HW Address: 90:4C:E5:38:79:0D Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes I'm not sure what to do next. Any suggestions?

  Read the article

• Reverse WiFi to Broadcast connection coming from a USB device

  - by Daniel Clem

  I am using the app called Clockworkmod Tether. It connects using a script ( command line " gksu ./run.sh " ) on the computer. All my programs connect to the internet perfectly, minitube, midori, transmission torrents. But the network manager does not show any connection, wired or wireless. So this may cause issues? What I want to do is take this connection, and be able to share it some way, any way, by wireless. This Acer Timeline "Aspire 5810TZ" does have an Ethernet, so wired out to a router might be an option. But I would prefer to simply reverse the Wireless card to broadcast out to about 2 or 3 devices. Is this possible? Yes I have taken a look at the other questions already posted here, but the answers are 1 year old or older, and not clear at all. I am moderately comfortable (4.5 out of 10 ) on the command line. But pretty much need line by line directions for what commands are needed and what order, ect. Edit I have already tried the method of "Left click network manager, Create New Wireless Network" It is created fine, and I am able to connect to it with a tablet, but am un-able to get an outside connection with it. Using the "Shared to other computers" option because DHCP doesn't seem to work, and WEP Passphrase Security. I get an IP address on the connected device. But as I said, won't bring up any outside webpages or the like. So perhaps this is the wrong approach?

  Read the article

• recent unreliable wireless connection on 10.04 and 10.10

  - by gabkdlly

  Recently, my internet connection over wireless has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista. The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. This problem does not seem to appear when I boot into Ubuntu 9.10 from a live CD ( more precisely, I was able to ping fu-berlin.de for an hour without any packet loss ). Under Ubuntu 10.10, I am experiencing about 33% packet loss. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow ( which happens often ) or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I have observed this problem with a Netgear KWGR614 Router ( with the manufacturers firmware ), as well as with a TP-LINK TL-WR741ND router running OpenWrt. Taking a look at my routers logs, I find many instances of the following line: Tuesday,04 Jan 2011 03:53:01 [TCP SYN Flood][Deny access policy matched, dropping packet] I know that the Netgear router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. I use WEP on the Netgear router and WPA on the TP-LINK to encrypt the wireless connections. Is it possible that someone is jamming my signal ?

  Read the article

• recent unreliable wireless connection

  - by gabkdlly

  Recently, my internet connection over wireless ( via a Netgear KWGR614 router ) has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista, nor on a Desktop running Windows 7 ( this machine is connected with an ethernet cable ). The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I have observed this problem with a Netgear KWGR614 Router ( with the manufacturers firmware ), as well as with a TP-LINK TL-WR741ND router running OpenWrt. Taking a look at my routers logs, I find many instances of the following line: Tuesday,04 Jan 2011 03:53:01 [TCP SYN Flood][Deny access policy matched, dropping packet] I know that the Netgear router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. I use WEP or WPA to encrypt the wireless network. Is it possible that someone is jamming my signal ?

  Read the article

• How to connect to my own WiFi using Broadcom STA drivers?

  - by Chris

  I'm trying hard to switch to Linux from Windows because of my engineering project. Unfortunately, everything is against that change! Before I have installed Broadcom STA proprietary drivers, I was seeing on NetworkManager and nm-applet only local radio-internet-access networks. After I installed Broadcom STA, I see my neighbor's wireless network (channel 11, WEP) Neither before nor after the installation is own wireless network available. Computer: Asus Lamborghini VX6 Ubuntu: 12.04 LTS 64-bit Router: ASUS N55U (A1) with newest AsusWRT firmware Network: Channel 5 (tried also 10 and 11, both on 20 and 40MHz bands), WPA2 Personal, 2,4 + 5 GHz (what is not very important, 'cause the wlan card in VX6 is only 2,4GHz). Network works fine on Windows, also through D-Link repeater on the other floor. Unfortunately, same network is invisible to Ubuntu on same machine. I have tried some combinations with other GUIs but it did not work. Are there any better drivers for Ubuntu? I need that network badly, but I'm an Ubuntu newbie, so I don't know how to solve that problem. Please help.

  Read the article

• Cannot connect to wireless network

  - by smr

  I am quite new to using Ubuntu 12.10. All I remember while installing Ubuntu 12.10 was that I didn't check any box specifically to enable wireless connectivity. I tried looking into the various questions posted here - most of them refer to certain commands (redundantly sudo) and things of that sort. I am quite new and wasn't sure of understanding what those commands were trying to do (the network configuration settings - showed up different options, like 'Wireless', 'Wired', 'IPv4', 'IPv6' etc -- I am not sure of what sort of settings are to be made - like for example what sort of 'WEP' settings etc are to be made. Although I wasn't able to connect to the wireless network, I was able to connect to the internet, once I plugged in the ethernet cable. Can someone help me with: 1) Understandng a way to see if Ubuntu is configured to connect to a wireless network. 2) If so - Getting to configure to a wireless network (setting up a new one). 3) Where in ubuntu, should I look for seeing if there are any hardware devices (such as the Broadcom wireless adapter or things of that sort - like the way we use the 'Device manager' in Windows to look into the adapter settings). 4) Reference material to learn and understand the various ubuntu commands. (things like the -lshw etc).

  Read the article

• Wifi won't connect to certain networks

  - by Dave M G

  As I write this, I'm in a coffee shop on my laptop, and I am trying to connect to the free wifi network they offer. Every time I select their network from the wifi applet drop down menu, it connects for a second and then disconnects. At the same time, I have my Android phone with me, and it connects to the coffee shop's network without problem. There are a couple of people around me also using the same network with no issues. I asked the staff to check and as far as they can tell there is no problem with their router or anything. I have tried rebooting, but it has not made a difference. I have double and triple checked that I am using the correct WEP password. As an added wrinkle, when I connect to another network, it seems to connect (although I can't use them because they are paid gateway services). So I'm able to ask this question now because I have tethered my laptop to my phone, but it's slow and a workaround, not a solution. All indications are that it's a problem with my computer against this one network. Why would that be and how can I fix it?

  Read the article

• Configuring an Engenius 3500

  - by dsiddens

  The title speaks to only half of the issue: the other half are the settings in Ubuntu and the sequences therein. The computer in this issue does receive internet with the external antenna jack at the back being fed with a simple magnetic base antenna designed for putting on the roof of an automobile. However, that signal is weak and the Engenius with an external antenna (Rootenna ~15db gain) and ehternet wire will supply a stronger, faster signal. I've set the Engenius to the desired source and entered the correct WEP password. The lights on the Engenius indicate that it's connected to the access point. At the Ubuntu side of this I've worked to no avail changing settings with "Edit Connections" to the point I'm Ask(ing)Ubuntu for help. I have and have RTFM for Engenius 3500 There is an embarrassing side note to this issue: At one time I had the Engenius working! It seems that I can't recall the settings and sequences I used way back when. And I may as well confess to not knowing the Command Line. I'm a GUI guy. Thank you for your time, Doug

  Read the article

• Google maps api v3 - multiple markers, multiple infowindows, 3 icons

  - by Adam

  Hello, I wanna made "WiFi maps" and I have problem with do that, I wanna have 3 icons OPEN/WEP/WPA, and a lot of markers, and every marker with own infowindow, and only 1 infowindow on top, so when I will click #1 and then #2 then #1 will hide. And if I will have XXXX markers there will be problem with them on map in zoom out, there is possible to made it like when is much markers in one place all will not show in zoom out but in zoom in yes? I have all info about networks in MySQL database, so in PHP will be easy to show it like in tutorial http://code.google.com/intl/pl/apis/maps/documentation/v3/overlays.html#ComplexIcons <- so follow this can I have for example var nodes = [ ['WKKOZ',50.192843,18.967801,nodewep,1], ['airlive',50.193056,18.967974,nodeopen,2], ['Zurawia-3',50.198398,18.974723,nodeopen,3], ['siec dol',50.19303,18.96796,nodewep,4], ['KP_8_1',50.193092,18.96801,nodewep,5], ['Natalia',50.19286,18.967812,nodewpa,6], ['Z104',50.192591,18.967588,nodewep,7], ['D2',50.192499,18.96876,nodewep,8], ['Niesia',50.192474,18.968239,nodewpa,9], ['boolean',50.192539,18.967545,nodewpa,10], ['neostrada_0d65',50.192179,18.96758,nodewep,11], ['neostrada_2d38',50.192216,18.96761,nodewep,12], ['Belkin_G_Wireless_9B7BF7',50.192191,18.969261,nodeopen,13], ['Trans_FijPn',50.1939,18.979565,nodeopen,14], ['dlinklis',50.193113,18.968024,nodewpa,15] Please help me!:)

  Read the article

• Load balancing with multiple gateways

  - by ttouch

  I have to different ISPs, each on each own network. The main connects via ethernet and the secondary via wifi. The two networks have no relation at all. I just connect to them simultaneously. The reason I want to load balance between them is to achieve higher Internet speeds. Note: I have no advanced network hardware. Just my pc and the two routers that I have no access... main network: if: eth0 gw: 192.168.178.1 my ip: 192.168.178.95 speed: 400 kbit/s secondary network: if: wlan0 gw: 192.168.1.1 my ip: 192.168.1.95 speed: 300 kbit/s A diagram to explain the situation: http://i.imgur.com/NZdsv.jpg I'm on Arch Linux x64. I use netcfg to configure the interfaces Configs: # /etc/network.d/main CONNECTION='ethernet' DESCRIPTION='A basic static ethernet connection using iproute' INTERFACE='eth0' IP='static' ADDR='192.168.178.95' # /etc/network.d/second CONNECTION='wireless' DESCRIPTION='A simple WEP encrypted wireless connection' INTERFACE='wlan0' SECURITY='wep' ESSID='wifi_essid' KEY='the_password' IP="static" ADDR='192.168.1.95' And I use iptables to load balance, rules: #!/bin/bash /usr/sbin/ip route flush table ISP1 2>/dev/null /usr/sbin/ip rule del fwmark 101 table ISP1 2>/dev/null /usr/sbin/ip route add table ISP1 192.168.178.0/24 dev eth0 proto kernel scope link src 192.168.178.95 metric 202 /usr/sbin/ip route add table ISP1 default via 192.168.178.1 dev eth0 /usr/sbin/ip rule add fwmark 101 table ISP1 /usr/sbin/ip route flush table ISP2 2>/dev/null /usr/sbin/ip rule del fwmark 102 table ISP2 2>/dev/null /usr/sbin/ip route add table ISP2 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.95 metric 202 /usr/sbin/ip route add table ISP2 default via 192.168.1.1 dev wlan0 /usr/sbin/ip rule add fwmark 102 table ISP2 /usr/sbin/iptables -t mangle -F /usr/sbin/iptables -t mangle -X /usr/sbin/iptables -t mangle -N MARK-gw1 /usr/sbin/iptables -t mangle -A MARK-gw1 -m comment --comment 'send via 192.168.178.1' -j MARK --set-mark 101 /usr/sbin/iptables -t mangle -A MARK-gw1 -j CONNMARK --save-mark /usr/sbin/iptables -t mangle -A MARK-gw1 -j RETURN /usr/sbin/iptables -t mangle -N MARK-gw2 /usr/sbin/iptables -t mangle -A MARK-gw2 -m comment --comment 'send via 192.168.1.1' -j MARK --set-mark 102 /usr/sbin/iptables -t mangle -A MARK-gw2 -j CONNMARK --save-mark /usr/sbin/iptables -t mangle -A MARK-gw2 -j RETURN /usr/sbin/iptables -t mangle -A PREROUTING -j CONNMARK --restore-mark /usr/sbin/iptables -t mangle -A PREROUTING -m comment --comment "this stream is already marked; escape early" -m mark ! --mark 0 -j ACCEPT /usr/sbin/iptables -t mangle -A PREROUTING -m comment --comment 'prevent asynchronous routing' -i eth0 -m conntrack --ctstate NEW -j MARK-gw1 /usr/sbin/iptables -t mangle -A PREROUTING -m comment --comment 'prevent asynchronous routing' -i wlan0 -m conntrack --ctstate NEW -j MARK-gw2 /usr/sbin/iptables -t mangle -N DEF_POL /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'default balancing' -p tcp -m conntrack --ctstate ESTABLISHED,RELATED -j CONNMARK --restore-mark /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'default balancing' -p udp -m conntrack --ctstate ESTABLISHED,RELATED -j CONNMARK --restore-mark /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j MARK-gw1 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j ACCEPT /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j MARK-gw2 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j ACCEPT /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j MARK-gw1 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j ACCEPT /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j MARK-gw2 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j ACCEPT /usr/sbin/iptables -t mangle -A PREROUTING -j DEF_POL /usr/sbin/iptables -t nat -A POSTROUTING -m comment --comment 'snat outbound eth0' -o eth0 -s 192.168.0.0/16 -m mark --mark 101 -j SNAT --to-source 192.168.178.95 /usr/sbin/iptables -t nat -A POSTROUTING -m comment --comment 'snat outbound wlan0' -o wlan0 -s 192.168.0.0/16 -m mark --mark 102 -j SNAT --to-source 192.168.1.95 /usr/sbin/ip route flush cache (this script was made by fukawi2, I don't know how to use iptables) but I have no Internet connection... output of iptables -t mangle -nvL Chain PREROUTING (policy ACCEPT 1254K packets, 1519M bytes) pkts bytes target prot opt in out source destination 1278K 1535M CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 CONNMARK restore 21532 15M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 /* this stream is already marked; escape early */ mark match ! 0x0 582 72579 MARK-gw1 all -- eth0 * 0.0.0.0/0 0.0.0.0/0 /* prevent asynchronous routing */ ctstate NEW 2376 696K MARK-gw2 all -- wlan0 * 0.0.0.0/0 0.0.0.0/0 /* prevent asynchronous routing */ ctstate NEW 1257K 1520M DEF_POL all -- * * 0.0.0.0/0 0.0.0.0/0 Chain INPUT (policy ACCEPT 1276K packets, 1535M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 870K packets, 97M bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 870K packets, 97M bytes) pkts bytes target prot opt in out source destination Chain DEF_POL (1 references) pkts bytes target prot opt in out source destination 1236K 1517M CONNMARK tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* default balancing */ ctstate RELATED,ESTABLISHED CONNMARK restore 15163 2041K CONNMARK udp -- * * 0.0.0.0/0 0.0.0.0/0 /* default balancing */ ctstate RELATED,ESTABLISHED CONNMARK restore 555 33176 MARK-gw1 tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 tcp */ ctstate NEW statistic mode nth every 2 555 33176 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 tcp */ ctstate NEW statistic mode nth every 2 277 16516 MARK-gw2 tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 tcp */ ctstate NEW statistic mode nth every 2 packet 1 277 16516 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 tcp */ ctstate NEW statistic mode nth every 2 packet 1 1442 384K MARK-gw1 udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 udp */ ctstate NEW statistic mode nth every 2 1442 384K ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 udp */ ctstate NEW statistic mode nth every 2 720 189K MARK-gw2 udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 udp */ ctstate NEW statistic mode nth every 2 packet 1 720 189K ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 udp */ ctstate NEW statistic mode nth every 2 packet 1 Chain MARK-gw1 (3 references) pkts bytes target prot opt in out source destination 2579 490K MARK all -- * * 0.0.0.0/0 0.0.0.0/0 /* send via 192.168.178.1 */ MARK set 0x65 2579 490K CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 CONNMARK save 2579 490K RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 Chain MARK-gw2 (3 references) pkts bytes target prot opt in out source destination 3373 901K MARK all -- * * 0.0.0.0/0 0.0.0.0/0 /* send via 192.168.1.1 */ MARK set 0x66 3373 901K CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 CONNMARK save 3373 901K RETURN all -- * * 0.0.0.0/0 0.0.0.0/0

  Read the article

• Characteristics of an Initialization Vector

  - by Jamie Chapman

  I'm by no means a cryptography expert, I have been reading a few questions around Stack Overflow and on Wikipedia but nothing is really 'clear cut' in terms of defining an IV and it's usage. Points I have discovered: An IV is pre-pended to a plaintext message in order to strengthen the encryption The IV is truely random Each message has it's own unique IV Timestamps and cryptographic hashes are sometimes used instead of random values, but these are considered to be insecure as timestamps can be predicted One of the weaknesses of WEP (in 802.11) is the fact that the IV will reset after a specific amount of encryptions, thus repeating the IV I'm sure there are many other points to be made, what have I missed? (or misread!)

  Read the article

• Expose jar resources over web

  - by Heavy Bytes

  I have a web-service (with Spring-WS). I have a jar with several schemas (schema1.xsd, schema2.xsd and schema3.xsd) which I include in my web service. Is there a way to expose the schemas from the jar through a servlet somehow in my web-service wep app? My Spring MessageDispatcherServlet is mapped to /ws/ I would like my schemas to be exposed to /schemas/schema1.xsd /schemas/schema2.xsd and so on. I have an idea how to do it with a servlet, but it's too verbose and there has to be a nicer way. The way I am thinking is have a servlet filter and everything that hits /schemas/ check if it is in my list of allowed resources and display it. This has to be a server agnostic solution. (For instance http://tuckey.org/urlrewrite/ will not work). Thanks.

  Read the article

• How do I get wireless working on a Dell Inspiron 510m?

  - by user17449

  Why WiFi don't work in my Dell Inspiron 510m with Ubuntu 10.04? Is that usefull? inspiron@Inspiron:~$ rfkill list all inspiron@Inspiron:~$ sudo lshw -C network [sudo] password for inspiron: *-network:0 DISABLED description: Wireless interface product: PRO/Wireless LAN 2100 3B Mini PCI Adapter vendor: Intel Corporation physical id: 3 bus info: pci@0000:01:03.0 logical name: eth1 version: 04 serial: 00:0c:f1:5b:5d:40 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ipw2100 driverversion=git-1.2.2 firmware=712.0.3:3:00000001 latency=32 link=no maxlatency=34 mingnt=2 multicast=yes wireless=unassociated resources: irq:5 memory:fcffe000-fcffefff *-network:1 description: Ethernet interface product: 82801DB PRO/100 VE (MOB) Ethernet Controller vendor: Intel Corporation physical id: 8 bus info: pci@0000:01:08.0 logical name: eth0 version: 81 serial: 00:11:43:41:d8:b8 size: 10MB/s capacity: 100MB/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half firmware=N/A ip=192.168.0.2 latency=32 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10MB/s resources: irq:11 memory:fcffd000-fcffdfff ioport:ecc0(size=64) inspiron@Inspiron:~$ iwconfig wlan0 wlan0 No such device inspiron@Inspiron:~$ ifconfig -a eth0 Link encap:Ethernet Endereço de HW 00:11:43:41:d8:b8 inet end.: 192.168.0.2 Bcast:192.168.0.255 Masc:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Métrica:1 pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet Endereço de HW 00:0c:f1:5b:5d:40 BROADCAST MULTICAST MTU:1500 Métrica:1 pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) IRQ:5 Endereço de E/S:0xe000 Memória:fcffe000-fcffefff lo Link encap:Loopback Local inet end.: 127.0.0.1 Masc:255.0.0.0 endereço inet6: ::1/128 Escopo:Máquina UP LOOPBACK RUNNING MTU:16436 Métrica:1 pacotes RX:628 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:628 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:0 RX bytes:50104 (50.1 KB) TX bytes:50104 (50.1 KB) inspiron@Inspiron:~$ nm-tool NetworkManager Tool State: connected - Device: eth1 ----------------------------------------------------------------- Type: 802.11 WiFi Driver: ipw2100 State: unavailable Default: no HW Address: 00:0C:F1:5B:5D:40 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: e100 State: unmanaged Default: no HW Address: 00:11:43:41:D8:B8 Capabilities: Carrier Detect: yes Speed: 10 Mb/s Wired Properties Carrier: off inspiron@Inspiron:~$

  Read the article

• iwlwifi on lenovo z570 disabled by hardware switch

  - by Kevin Gallagher

  It was working fine with windows 7. The hardware switch is not disabled. I've toggled it back and forth dozens of times. The wifi light never turns on and it always lists as hardware disabled. I have the latest updates installed. I've been searching for solutions, but none of them seem to work for me. I've tried removing acer-wmi. I've tried setting 11n_disable=1. I've tried resetting the bios. I've tried using rfkill to unblock (only removes soft block). I've rebooted dozens of times. The wifi light turns off as soon as grub loads. Edit: I have a usb edimax wireless nic. It shows hardware disabled as well (although rfkill lists as unblocked). If I unload iwlwifi the usb nic works fine. uname -a `Linux xxx-Ideapad-Z570 3.2.0-55-generic #85-Ubuntu SMP Wed Oct 2 12:29:27 UTC 2013 x86_64 x86_64 x86_64 GNU/Linu`x rfkill list 19: phy18: Wireless LAN Soft blocked: no Hard blocked: yes dmesg [43463.022996] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [43463.023002] Copyright(c) 2003-2011 Intel Corporation [43463.023107] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [43463.023190] iwlwifi 0000:03:00.0: setting latency timer to 64 [43463.023253] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000 [43463.023257] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057c8000 [43463.023261] iwlwifi 0000:03:00.0: HW Revision ID = 0x0 [43463.023797] iwlwifi 0000:03:00.0: irq 43 for MSI/MSI-X [43463.024013] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [43463.024250] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [43463.045496] iwlwifi 0000:03:00.0: device EEPROM VER=0x15d, CALIB=0x6 [43463.045501] iwlwifi 0000:03:00.0: Device SKU: 0X50 [43463.045504] iwlwifi 0000:03:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [43463.045542] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [43463.045744] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio. [43463.047652] iwlwifi 0000:03:00.0: loaded firmware version 39.31.5.1 build 35138 [43463.047823] Registered led device: phy18-led [43463.047895] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [43463.048037] ieee80211 phy18: Selected rate control algorithm 'iwl-agn-rs' [43463.055533] ADDRCONF(NETDEV_UP): wlan0: link is not ready nm-tool State: connected (global) - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: unavailable Default: no HW Address: 74:E5:0B:4A:9F:C2 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points lshw -C network *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 [Condor Peak] vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 74:e5:0b:4a:9f:c2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-55-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bg resources: irq:43 memory:f1500000-f1501fff lspci 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak]

  Read the article

< Previous Page | 1 2 3 4 5 6 7  | Next Page >