Search Results

Search found 227 results on 10 pages for 'wpa'.

Page 5/10 | < Previous Page | 1 2 3 4 5 6 7 8 9 10  | Next Page >

  • What are the ideal settings for a Belkin WiFi Router to connect to an iPhone? [closed]

    - by user34833
    The Belkin Router (F5D8235-4 v2000) has numerous options in the setup. These are the current settings: Wireless On SSID Buster's Special Security Type WPA Encryption Type TKIP WLAN MAC Address 00:22:75:B3:58:38 WPS Enabled Guest Access Disabled SSID Belkin_N+_Guest Password/PSK NotThatSillyYet :) The iPhone is a 3g with 16GB it has no problems connecting to public networks like libraries or restaurants. But currently it won't connect to my home WiFi. Thanks for your time and help. Paul

    Read the article

  • Can't get my Raspberry Pi to keep a static IP

    - by JonnyIrving
    I recently got given a Raspberry Pi and I would like to be able to remote into it using puTTy from my laptop so I don't have to sit next to my tv with a keyboard and mouse to use it. I am able to get a puTTy session going when I know the IP address that my router has given the Pi on each session but it keeps changing on each reboot as I would expect. So I followed a number if instruction to go about configuring the RPi to keep a static IP address. This involved changing the file at '/etc/netwrok/interfaces' which now contains (password removed): auto lo iface lo inet loopback iface eth0 inet static address 192.168.1.82 netmask 255.255.255.0 gateway 192.168.1.254 auto wlan0 allow-hotplug wlan0 iface wlan0 inet dhcp wpa-ssid "BeBoxD304BF" wpa-psk "**********" Despite this however, each time I reboot my RPi it gives me a new dynamic IP address still. I also noticed that in the 'ifconfig' output below that the details of the eth0 doesn't contain IP details for inet addr, Bcast or Mask which have been present in all other examples I have seen online. eth0 Link encap:Ethernet HWaddr b8:27:eb:b5:95:da UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:87:c6:00:33:77 inet addr:192.168.1.83 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:918 errors:0 dropped:0 overruns:0 frame:0 TX packets:277 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 Also I'm not sure if this is relevant but it can't hurt! The file at '/etc/resolv.conf' contains: domain config search config nameserver 192.168.1.254 ..I heard it might mean something on one of the pages I was looking at. I would be very grateful for any help with this. I have tried everything I can think of and would really like to get this working this weekend so I can use it from work.

    Read the article

  • No WPA2 option in Windows XP SP3

    - by user34300
    I have a fresh Windows XP SP3 installation on several PCs but none of them has WPA/WPA2 option in Wireless Networks section of the connection properties regardless of wireless adapters they have (that supports WPA2). Can someone provide an advice on how to fix that?

    Read the article

  • Windows CE Netbook wireless connection problem

    - by VG
    My Windows CE Netbook connects to wireless network at work but can't connect at home. I tried it at work just to test that the WiFi on the Netbook does actually work and it was fine (if a bit slow) It can see the connection, and the signal, tries to "Associate" with my home network but "Fails" it will sometimes retry Encryption is set to TKIP Authentication WPA-PSK EAP Type TLS I have tried all sorts of other settings but there seems to be very little to try?? My Modem is a DLink Wireless ADSL Router G604T Would appreciate some help if possible.

    Read the article

  • An device with an unknown MAC address is connected to my router

    - by Yar
    There is a computer that is not mine that is accessible on my network. I can even access its filesystem via AFP. What I want to know is how the computer could get on my network. My network is secured like this: Does that mean that they've used password cracking tools? The pass is not easy to guess but not hard to figure out via brute-force hacking, I guess. If I am being hacked, should I switch to WPA?

    Read the article

  • An unknown Mac is connected to my router?

    - by Yar
    There is a computer that is not mine that is accessible on my network. I can even access its filesystem via AFP. What I want to know is how the computer could get on my network. My network is secured like this: Does that mean that they've used password cracking tools? The pass is not easy to guess but not hard to figure out via brute-force hacking, I guess. If I am being hacked, should I switch to WPA?

    Read the article

  • Mac on My Router?

    - by Yar
    There is a computer that is not mine that is accessible on my network. I can even access its filesystem via AFP. What I want to know is how the computer could get on my network. My network is secured like this: Does that mean that they've used password cracking tools? The pass is not easy to guess but not hard to figure out via brute-force hacking, I guess. If I am being hacked, should I switch to WPA?

    Read the article

  • Computer Networks UNISA - Chap 12 &ndash; Networking Security

    - by MarkPearl
    After reading this section you should be able to Identify security risks in LANs and WANs and design security policies that minimize risks Explain how physical security contributes to network security Discuss hardware and design based security techniques Understand methods of encryption such as SSL and IPSec, that can secure data in storage and in transit Describe how popular authentication protocols such as RADIUS< TACACS,Kerberos, PAP, CHAP, and MS-CHAP function Use network operating system techniques to provide basic security Understand wireless security protocols such as WEP, WPA and 802.11i Security Audits Before spending time and money on network security, examine your networks security risks – rate and prioritize risks. Different organizations have different levels of network security requirements. Security Risks Not all security breaches result from a manipulation of network technology – there are human factors that can play a role as well. The following categories are areas of considerations… Risks associated with People Risks associated with Transmission and Hardware Risks associated with Protocols and Software Risks associated with Internet Access An effective security policy A security policy identifies your security goals, risks, levels of authority, designated security coordinator and team members, responsibilities for each team member, and responsibilities for each employee. In addition it specifies how to address security breaches. It should not state exactly which hardware, software, architecture, or protocols will be used to ensure security, nor how hardware or software will be installed and configured. A security policy must address an organizations specific risks. to understand your risks, you should conduct a security audit that identifies vulnerabilities and rates both the severity of each threat and its likelihood of occurring. Security Policy Content Security policy content should… Policies for each category of security Explain to users what they can and cannot do and how these measures protect the networks security Should define what confidential means to the organization Response Policy A security policy should provide for a planned response in the event of a security breach. The response policy should identify the members of a response team, all of whom should clearly understand the the security policy, risks, and measures in place. Some of the roles concerned could include… Dispatcher – the person on call who first notices the breach Manager – the person who coordinates the resources necessary to solve the problem Technical Support Specialist – the person who focuses on solving the problem Public relations specialist – the person who acts as the official spokesperson for the organization Physical Security An important element in network security is restricting physical access to its components. There are various techniques for this including locking doors, security people at access points etc. You should identify the following… Which rooms contain critical systems or data and must be secured Through what means might intruders gain access to these rooms How and to what extent are authorized personnel granted access to these rooms Are authentication methods such as ID cards easy to forge etc. Security in Network Design The optimal way to prevent external security breaches from affecting you LAN is not to connect your LAN to the outside world at all. The next best protection is to restrict access at every point where your LAN connects to the rest of the world. Router Access List – can be used to filter or decline access to a portion of a network for certain devices. Intrusion Detection and Prevention While denying someone access to a section of the network is good, it is better to be able to detect when an attempt has been made and notify security personnel. This can be done using IDS (intrusion detection system) software. One drawback of IDS software is it can detect false positives – i.e. an authorized person who has forgotten his password attempts to logon. Firewalls A firewall is a specialized device, or a computer installed with specialized software, that selectively filters or blocks traffic between networks. A firewall typically involves a combination of hardware and software and may reside between two interconnected private networks. The simplest form of a firewall is a packet filtering firewall, which is a router that examines the header of every packet of data it receives to determine whether that type of packet is authorized to continue to its destination or not. Firewalls can block traffic in and out of a LAN. NOS (Network Operating System) Security Regardless of the operating system, generally every network administrator can implement basic security by restricting what users are authorized to do on a network. Some of the restrictions include things related to Logons – place, time of day, total time logged in, etc Passwords – length, characters used, etc Encryption Encryption is the use of an algorithm to scramble data into a format that can be read only by reversing the algorithm. The purpose of encryption is to keep information private. Many forms of encryption exist and new ways of cracking encryption are continually being invented. The following are some categories of encryption… Key Encryption PGP (Pretty Good Privacy) SSL (Secure Sockets Layer) SSH (Secure Shell) SCP (Secure CoPy) SFTP (Secure File Transfer Protocol) IPSec (Internet Protocol Security) For a detailed explanation on each section refer to pages 596 to 604 of textbook Authentication Protocols Authentication protocols are the rules that computers follow to accomplish authentication. Several types exist and the following are some of the common authentication protocols… RADIUS and TACACS PAP (Password Authentication Protocol) CHAP and MS-CHAP EAP (Extensible Authentication Protocol) 802.1x (EAPoL) Kerberos Wireless Network Security Wireless transmissions are particularly susceptible to eavesdropping. The following are two wireless network security protocols WEP WPA

    Read the article

  • How to Turn Your Ubuntu Laptop into a Wireless Access Point

    - by Chris Hoffman
    If you have a single wired Internet connection – say, in a hotel room – you can create an ad-hoc wireless network with Ubuntu and share the Internet connection among multiple devices. Ubuntu includes an easy, graphical setup tool. Unfortunately, there are some limitations. Some devices may not support ad-hoc wireless networks and Ubuntu can only create wireless hotspots with weak WEP encryption, not strong WPA encryption. HTG Explains: What Is RSS and How Can I Benefit From Using It? HTG Explains: Why You Only Have to Wipe a Disk Once to Erase It HTG Explains: Learn How Websites Are Tracking You Online

    Read the article

  • Connect to new wireless network

    - by Shawn de Wet
    Wireless networking was working perfectly on my old adsl router. Then I moved to a new home that does not have adsl, and the router has been replaced with a new 3G one. I have worked through the following links: Connecting to a wireless network and http://ubuntuforums.org/showthread.php?t=571188 I have set the router from it's default WPA-PSK encryption to WEP encryption and also to No Encryption. But when I get to dhclient -wlan0, I keep getting No DHCPOFFERS received. Yet the 2 windows machines in my home connect fine to this wirelesss network (in all encryption settings). If I try iwlist scan I can see that the wireless network is indeed visible. Where do I start scratching to see where the problem may lie.

    Read the article

  • wireless connection will not authenticate with verizon adsl router

    - by eric
    hello, i have ubunto 10.10 running on an old dell xps system. when i set it up i had internet through my home wifi router on my cable modem. now the dell is at another home with an ADSL wifi router from verizon. we have entered the ssid and wep key as given from the adsl router. the other windows computers connect with the wep key and automatic detection. the ubuntu dell detects the connection but does not autenticate, keeps asking for wep key. i have tried diferent settings regarding wep, wpa, wep with hex and asci, still no results. what am i doing wrong? help please. thanks.

    Read the article

  • How do I get a Netgear WNDA3100V2 working?

    - by Michal
    I have Ubuntu 11.10 on my desktop. A month ago I bought Linksys AE1000 adapter,I did not check that it's not working on Ubuntu and because I've lost receipt I'm stuck with it. Last week I bought Netgear adapter and this time I did check and it meant to be plug an play but it was not. I have checked many forums and managed to install software, system does sees adapter but it's not connecting to network. I have found that it may not like WPA so I have created my own password-letters and digits,no spaces-still nothing.I don't understand why. This is my next attempt with Linux and I'm not with IT background so it takes time and research before I can resolve something but I really want to learn. I so wish to learn on Ubuntu.One day, I've checked Fedora16 and my old Linksys AE1000 worked without any instalations.

    Read the article

  • Can't find ALL wireless networks, just my neighbours

    - by motoringeek
    Been playing with live discs since 10.10 but now have gone ahead and dual booted. I have a Acer 5742z with a Nplify 802.11b/g/n wireless connection. The install went well and drivers seem to be working. BUT, although wireless detects some local networks it doesn't find mine. I have WPA-PSK security on my modem, could this be the problem?? I don't want to change my modem settings as all my other WIFI devices are contected to it. So I need help in finding my home network. A step by step guide would be useful. I am using Windows 7 now to write this but would love it if I could use Ubuntu online. I only can when I connect an Ethernet cable. Thanks in advance.

    Read the article

  • Network Manager kicks off abruptly

    - by Vijay Selvaraj
    I have installed Ubuntu 10.10 and trying to connect with my ADSL Wireless broadband internet modem using Linksys WUSB600N receiver. The good news is the OS is able to detect my wifi network and I am able to hook to network over WPA authentication with basic settings. But the network goes off abruptly and never connects again until I reboot the machine. I have Windows 7 as dual boot on my machine. The same adapter works perfectly with Windows 7 but not in Ubuntu. Is there anything in need to tweak to make things working or do I need to try any other better network manager on Ubuntu?

    Read the article

  • Ubuntu 12.04, can't find my home wifi network

    - by Anton
    I've tried several solutions I found on the web, but didn't manage to solve a problem. Since today my laptop won't find my WiFi network, but neighbours' networks are suggested. Another laptop with U12.04 does find one. What do I do? I've Dell Latitude-E4310, 02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01) Subsystem: Dell Inspiron M5010 / XPS 8300 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f2c00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: bcma, brcmsmac also NetworkManager Tool State: connected (global) - Device: eth1 ----------------------------------------------------------------- Type: 802.11 WiFi Driver: wl State: disconnected Default: no HW Address: 1C:65:9D:7A:45:5C Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Should I provide anything else? Many thanks in advance.

    Read the article

  • HP 530 Wireless problem. Bad communication with access point

    - by foxy
    I installed Ubuntu 11.10 on HP 530 and to make Wireless work installed STA driver from jockey (obviously proprietary) and, since it didn't work also installed their driver from HP website via ndiswrapper. After this (and a reboot) I see the WiFi indicator glowing, like it should be, and I am able to find local access points. But when I try to connect to mine personal one with WPA 2 security (with password) it hangs at authentification (I'm using wicd to manage wifi), and after a minute or so (I guess timeout of request happens) it says I have a wrong password (it is 100% correct). What might be the problem here? Yesterday I was able to connect to access point by changing type of encryption from passphrase to preshared key but didn't have internet access. Now, after reboot, I can't connect there again.

    Read the article

  • Unstable Wifi and Spontaneous Low-graphic Error with Pavilion DV4

    - by Constant Dean
    I've been having numerous problems with connectivity through WiFi. It had been working for a few days and now it doesn't. On top of that around 40% of every time I turn on the laptop it shows "System running in low-graphics" error and I'm unable to view the desktop (sometimes not even able to access terminal), therefore having to manually power-down until it finally works. I use Ubuntu 12.10. nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: r8169 State: connected Default: yes HW Address: 84:34:97:6B:2E:D7 Capabilities: Carrier Detect: yes Speed: 10 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.10 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 DNS: 68.237.161.12 - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: rt2800pci State: unavailable Default: no HW Address: 68:94:23:50:A5:D9 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points

    Read the article

  • Wifi works perfectly on Windows, but drops on Ubuntu

    - by alecRN
    I have a dual-boot computer with Windows XP on one partition and Ubuntu 10.10 on the other. In Windows XP I can connect to a hidden wireless network (WPA-PSK AES) perfectly, and I was finally able to install the driver for the adapter on Ubuntu (RNX-N180UBE, hardware id RTL8191SU). It works fine when I first boot the computer and log in, but then after a few minutes the network suddenly stops working completely. If I try to reconnect it, the network manager claims to have connected, but in actuality it's still down. At some points, I have been able to connect to a public network even while the private network didn't work, but that eventually wouldn't work at all either.

    Read the article

  • Sony VAIO wireless card not connecting intel 4965AGN

    - by marcski55
    I'm running a Sony VAIO VGN-CR410E, and recently moved it to Ubuntu from Windows 7. Both my home and work networks (which I maintain) run WPA/WPA2-PSK authentication for security. My wireless network card (intel 4965AGN) will not connect to them unless I am in the same room (kind of defeats the purpose of wireless). The PC is 4 years old and the routers are brand new (last month or so). Had no problems with it with Win7, but Ubuntu just doesn't like the networks. As an IT manager, my laptop needs to work, so any help is appreciated. If this is a duplicate, please let me know of what. I've spent hours searching and nothing has worked. Thanks for your help. (This is my first experience fully relying on Ubuntu). I can see the networks and attempt connection, but it fails authentication. Let me know of any code you need.

    Read the article

  • Ubuntu 12.04 on Vm Player showing Wired Network Instead of Wireless Network

    - by Fak365
    I am new to Ubuntu, recently I installed ubuntu 12.04 in Vm Player (Virtual Machine) on my Dell laptop having windows 7 ultimate 32 bit for just to check the security of my wireless network and want to crack the WiFi (WPA-PSK) password but in ubuntu it does not show the wireless network it shows the 2 arrow sign as i have not connect the ethernet cable to my laptop and connected through WiFi on my main OS (windows 7) but it shows the wired network and internet is working but it does not show wifi connection. On windows 7 WiFi is connected and showing the WiFi connection and working correctly.But my main motive is to crack the WiFi password as it can't detect WiFi network so what to do? Please Help.!!thanks My Laptop Specification : Laptop : Dell Latitude D620 OS : Windows 7 Ultimate 32 bit Processor : Core Duo 2 T7200 @ 2Ghz Ram : 2 GB WiFi card : Intel Pro/Wireless 3945 ABG Virtual Machine : Vm Player V 5.0.1 If Need to Install Drivers Please Give Me Full Information how to install and which driver I should install. Thanks In Advance.

    Read the article

  • Need instructions on how to create wpa_supplicant.conf and add fast_reauth=0 to it

    - by nutty about natty
    Like many other natty users on a university/academic network, I'm experiencing annoying frequent disconnects/hangs/delays. See, for instance here. I would like to learn how to add fast_reauth=0 to the wpa_supplicant.conf file. This file, it seems, does not exit by default, and needs to be manually created first: README You will need to make a configuration file, e.g. /etc/wpa_supplicant.conf, with network configuration for the networks you are going to use. Further, I installed wpa_gui which probably needs to be launched with parameters, else it's pretty blank... What I'm hoping for is this: That creating a wpa_supplicant.conf file with fast_reauth=0 in it, saving it to the relevant path, will work and make my uni wireless (more or even completely) stable. I read mixed reviews about wicd (as an alternative to the network manager). Also note that on my basic wlan at home (with bog-standard wpa encryption) the connection is stable. Thanks!

    Read the article

  • Connected to Access Point but no internet connection?

    - by ReaZem
    I am trying to use my school's WPA Enterprise network to access the internet with my Three-OS laptop. I currently have Windows7, Ubuntu11.10 and Backtrack5 installed. I can use my home's WPA2 network without any issues with the 3 OS. I can successfully connect to my school's network with the 3 OS but I can only browse the internet with windows7. Ubuntu network-manager and Backtrack WICD both say that I am connected to the Acces Point but I cannot browse the internet. I have tried uninstalling network-manager and installing WICD but it did not solve the problem. Every time I connect to the Access Point, I am able to browse the internet for about 10 seconds. I have tried disabling IPV6 I have tried changing DNS.

    Read the article

  • Wireless doesn't work for me in Lubuntu but does in Puppy?

    - by user54871
    I am new to GNU Linux. I have been having trouble getting wireless working on my installed system of Lubuntu 11.10. It sees my WPA network but cannot connect even when I remove the password. Looking around for a different distro that might replace it, I was amazed to find that Puppy was able to connect to my wireless network without trouble, running off a USB stick. So this makes me think that my Lubuntu wireless problem might be fixable so I don't have to have the major hassle of backing up all my documents etc before installing a different distro to the laptop. Can anyone suggest some steps that might help me to fix wireless on Lubuntu, perhaps using the fact it works with Puppy? Thanks. Rob

    Read the article

  • ASUS VX-6 Laptop Wireless not connecting

    - by user2152790
    Someone posted a script a couple days ago, here is my output.Pastebin I can see wifi SSIDs in network, but cannot connect to mine. The only time wifi worked on 13.10 was in the Live CD, but wifi stopped working as soon as install process started. Did below but made no difference. sudo apt-get install bcmwl-kernel-source sudo modprobe -rv brcmsmac sudo modprobe -v wl What I do next? I tried Software&Updates and it showed 1 proprietary driver in use. This sounds like a WPA/WPA2 issue? Wifi works when I tried Zorin OS 7.1, wifi always worked in windows 7.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10  | Next Page >