Search Results

Search found 18544 results on 742 pages for 'connection sharing'.

Page 50/742 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

• Enable wifi on my computer - firmware missing

  - by Sarah

  I am attempting to set up a wireless network on 11.04, freshly download today. The router is on and working. However, I do not have a wifi "card" (which I am assuming is a little USB-type thing that allows internet access, but correct me if I am wrong) and every time I try to type in the MAC address and everything, nothing works. I also get the "firmware missing" error when I scroll over the signal strength, which I have tried looking up but have been unsuccessful with completely understanding it. I guess my main question is do I need another little device to be able to use wifi on my ubuntu? I do have an ethernet cable but another person is using it and I do not want to be tied down to that cable. the problem is that none of the wireless networks show up, however they show up when I go into Windows mode on my laptop. I get an error message at the top saying "firmware missing" which I have tried looking up but still have no straight answer for.

  Read the article

• Does TOR protect privacy of bittorrent clients like Transmission?

  - by rocky

  I am using the Tor bundle and its included browser to initiate torrent downloads with the Transmission client included with Lubuntu. Clicking on a torrent link provides a warning message that external apps are NOT protected by Tor and clicking ok results in normal Transmission start and it begins the download. I have seen assertions in another post answer that Tor starts Transmission using a different profile than the normal $HOME/.config/transmission. However, I see no evidence of the referenced different profile on my system ( $HOME/tor-browser_en-US/.config/transmission). The normal privacy settings provided within Transmission seem inadequate for privacy according to what I have read. Has something changed in how Tor bundle browser (firefox) interacts with supporting apps like Transmission. Tor bundle otherwise seems to be operating correctly. I asked the question in the post but it was deleted by moderator for some reason not given

  Read the article

• Playing Age of Empires II multiplayer in VirtualBox Over wi fi network

  - by Gaurav_Java

  I installed Age of Empires II (Expansion) in VirtualBox (hosting Windows XP). It works great in single player mode. Unfortunately, I tried playing multiplayer via WI-FI which I created on my Ubuntu machine and can't seem to join games. But when I connected to my WI-FI router other able to connect to my system and we can play multiplayer mode This is what I've done so far to try to resolve the issue: I noticed that the IP address of my virtual machine was 10.0.x.x, While the local IP on Ubuntu is 192.168.x.x, which I figured was a Problem. So I changed from NAT networking to bridged networking in VirtualBox . I turned off the Windows firewall in the virtual machine and don't have any ports blocked by Ubuntu, so no software firewall should be at fault. However I'm still unable to play multiplayer games, and suspect that some kind of networking issue lies at the heart of the problem. I'm not sure what else I would need to change, however. So essentially I was wondering if anyone else here has managed to play AOE2, or any similar game, inside VirtualBox from Ubuntu, and if so what you needed to do to make it possible. Or if anyone has suggestions on where else to look to figure out the problem, I'd appreciate that as well. Unfortunately AOE2 itself doesn't provide any debugging information to troubleshoot the inability to connect to network games. Here MY IP result both for Ubuntu and Virtualbox XP I want to play game on multiplayer mode in virtualbox on my system(Own Created on Ubuntu ) wi-fi on which other can connect and play hope someone will answer this

  Read the article

• Does the Ubuntu One sync work?

  - by bisi

  I have been on this for several hours now, trying to get a simple second folder to sync with my (paid) account. I cannot tell you how many times I removed all devices, removed stored passwords, killed all processes of u1, logged out and back in online...and still, the tick in the file browser (Synchronize this folder) is loading and loading and loading. Also, I have logged out, rebooted countless times. And this is after me somehow managing to get the u1 preferences to finally "connect" again. I have also checked the status of your services, and none are close to what I am experiencing. And I have checked the suggested related questions above! So please, just confirm whether it is a problem on my side, or a problem on your side.

  Read the article

• Likewise: joined Active Directory but cannot write shares.

  - by Aron Rotteveel

  I have never used a Linux system in an AD environment before and am trying to join my laptop running Ubuntu to join our Active Directory (DC is a Windows Server 2008 machine) using Likewise-open. Using the GUI wizard, I have joined the domain. I can mount network shares using CIFS Problem: I only have read access to our fileserver. What more is needed to get the AD to recognize me as a user who has the appropriate rights? Any help is appreciated.

  Read the article

• Why won't my Internet stay connected?

  - by Aubrey

  I recently updated to Ubuntu 12.04, from Ubuntu 10.04, and my Internet, USB760 Novetel Verizon-Wireless Mobile Broadband, will connect after a minute of me starting the computer up. But after a while it will disconnect and the only way to reconnect it is to restart the computer. Even then, sometimes it won't work. I've also noticed that since I've upgraded the computer, the computer will randomly enter into Power Save mode, and then it will tell me to log back in. I've done nothing to provoke it, other than using the Internet. I was wondering, could the entering into Power Save mode and the Internet disconnecting be somehow connected? I've updated the computer every time it asks me to do so, but it doesn't seem to be helping. If Ubuntu 10.04 would still be supported by next year, I would downgrade. But I have no other choice than to stick with 12.04. Any help would be greatly appreciated! Thanks!

  Read the article

• Activist shared printing material gallery

  - by Dave

  What would you say would be the best way to do this: We would like to create a section on our activist community FB page and website in order to share with everyone images and files ready for printing panflets, brochures, t-shirts, stickers, etc. Let's say we have some cool slogans for t-shirts, so we would like to show them on a gallery, and offer for download the original design files needed for a print shop to create the t-shirts. And the same thing for all other kinds of media. We want to enable anyone to be able to just download the files for free, and easily create printed materials with them. But besides offering this hybrid between picture gallery and downloads manager, we would also like to make it very easy for anyone to upload and share their own files with the community, to make it a true collaboration initiative, be it that they get posted automatically, or that we first review and approve all uploads. Cafepress or Spreadshirt let you upload your design and sell your own merchandise. We need something similar, but where people can then download working files for making quality printings and materials. What apps, tools, services or methods are out there with which you think this could be best done?? We have some ideas, but we would like to hear some more!!

  Read the article

• Ubuntu 12.04 Wireless won't connect with gnome network manager or wicd

  - by iceblueirish

  I have an HP Pavilion Slimline s3100n and I cannot for the life of me get the wifi to connect and stay connected in any circumstances with network manager or wicd... I'm pulling my freaking hair out with this, and I can't get a dang thing down AT ALL... switching to wicd didn't work, putting my password in the connections editor didn't work... nothing at all is working... everything that everyone else is saying to me is chinese and I really just want my pc to work... please help... I will provide any information needed to help me with this. just instruct me on how to find that information. Don't pass this question by without helping me please... I'm so frustrated...

  Read the article

• Why am I getting a "network is unreachable" error on Ubuntu Server?

  - by jason328

  I'm a completely new to Ubuntu server and am having a hard time connecting the server to the internet. I first ran ping -n 8.8.8.8 connect:Network is unreachable Then I ran ifconfig Link encap:Local Loopback inet addr:127.0.0.1 Mask 255.0.0.0 inet6 addr: ::1/28Scope:host UP LOOPBACK RUNNING MTU:16436 RX packets:192 errors:0 dropped:0 overruns:0 frame:0 TX packets:192 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:15360 (15.2KB) TX bytes:15360 (15.3KB) Here is ouput for sudo lspci -n 00:00.0 0600: 8086:2580 (rev 04) 00:02.0 0300: 8086:2582 (rev 04) 00:1d.0 0c03: 8086:2658 (rev 03) 00:1d.1 0c03: 8086:2659 (rev 03) 00:1d.0 0c03: 8086:265a (rev 03) 00:1d.0 0c03: 8086:265b (rev 03) 00:1d.0 0c03: 8086:265c (rev 03) 00:1e.0 0604: 8086:244e (rev d3) 00:1e.0 0401: 8086:266e (rev 03) 00:1f.0 0601: 8086:2640 (rev 03) 00:1f.0 0101: 8086:2651 (rev 03) 00:1f.0 0c05: 8086:266a (rev 03) 00:0b.0 0200: 8086:1654 (rev 03) lshw-c network returns WARNING: you should run this program as super-user. *-network DISABLED description:Ethernet interface product: NetXtreme BCM5705_2 Gigabit Ethernet vender: Broadcom Corporation physical id:b bus info:pci@0000:0a:0b.0 logical name: eth0 capabilities: bus_master_cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion= 3.121 firmware=5705-v3.18 latency=32 mingnt=64 multicast=yes port=twister pair lsmod code returned this Module Size Used By e100 37213 0 dm_crypt 23125 1 ppdev 17113 0 psmouse 87603 0 snd_intel8x0 38570 0 snd_ac97_codec 134826 1 snd_intel8x0 ac97_bus 12730 1 snd_ac97_codec snd_pcm 97188 2 snd_intel8x0, snd_ac97_codec serio_raw 13211 0 snd_timer 29990 1 snd_pcm snd 78855 4 snd_intel8x0, snd_ac97_codec, snd_pcm,snd_timer soundcore 15091 1 snd snd_page_alloc 18529 2 snd_intel8x0, snd_pcm ext2 73795 1 parport_pc 32866 1 mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev, parport_pc,lp usbhid 47199 0 hid 99559 1 usbhid tg3 152032 0 i915 468651 1 floppy 70365 0 drm_kms_helper 46978 1 i915 drm 242038 2 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 video 19596 1 i915 Again there is more but it's giving info on the driver itself. I know it works, I've used it. I assume then that my network got disabled when I installed Ubuntu Server. How do I enable it? I checked and the internet cable is connected to the D-link router. I have also used this same computer for internet access when I had Ubuntu Desktop installed so internet does work.

  Read the article

• Why is Samba Access from Windows So Slow?

  - by swalker2001

  I have set up a file server using Ubuntu 12.04 Server. The purpose is to serve several network drives to Windows users that have heretofore been served by numerous NAS drives. I have Samba set up with one share defined so far. I can connect to it fine from my test Windows 7 and Windows XP machines. When I do a directory listing on the share from Windows, it can take up to two minutes to get all the files listed--would have taken about 1.5 seconds when I was using the Buffalo NAS. Sometimes it times out with no response at all. I have used the default smb.conf and simply added the following for the share I have set up so far: [engineering] comment = Ubuntu File Server Share path = /networkdriveshares/engineering browsable = yes guest ok = yes read only = no create mask = 0755 I have tried changing the workgroup setting to the Active Domain name our Windows computer use but didn't notice any difference. The only other change I made to the default smb.conf was adding in the recommended socket settings: SO_RCVBUF=8192 SO_SNDBUF=8192 socket options = TCP_NODELAY Lots of information about slow Samba shares online but I have tried all of the solutions I have found and none have made a lick of difference. If there is no solution, is there a better way to set up a file server to be used by Windows clients?

  Read the article

• make my Ubuntu 12.04 laptop visible on the network

  - by Andrew Boyd

  I'm ecstatically happy with my 12.04 on my laptop after loading it over my MS Vista... but there's just one thing, one little fly in the ointment.... While I can view our 2 Terabyte, shared hard-drive in the lounge (and copy files back and forth) I can't see my PC (when I boot up in Ubuntu 12.04) nor the Lubuntu computer connected to the TV (for movies, Youtube etc). Printing to the HP office jet on the PC doesnt work over the network either. Have had one dubious flirtation with Samba, which seems to be the only thing I've found that will 'work', however halfway through that "installation" everything just ground to a halt, the directions began to stop making sense... I was working from this page. Our Network consists of the following: Our Internet service is wirelessly sent to us from our provider to our dish on a pole. It comes into the house via an ethernet cable. We split it there to a phone, and to 6 other destinations (bedrooms, computers, and to another splitter in the lounge which has a wifi antennae and 4 ethernet ports). one port goes to the Lubuntu OS PC which is connected to the TV the second port goes to the 2 Terabyte harddrive (MS powered 'Mybooklive') (the other two are empty) My Ubuntu 12.04 laptop connects wirelessly to this splitter in the lounge. I know just enough about computers to get myself into an awful mess without too much trouble We usually can view friends' laptops when they get on our network (as they are invariably MS OS's) Our flatmate, who introduced us to Linux's computer is also invisible How can we make our Linux OS based computers visible on the network and share files and printing?

  Read the article

• WiFi and Bluetooth will not work on Dell Studio XPS 1645

  - by Ross

  Today I acquired a Dell XPS 1645. Ubuntu seems to run alright on it however The bluetooth is not detected and the WiFi doesn't work. The WiFi is especially weird because I actually have the restricted driver enabled for it. It also worked for a short while when I first booted into Ubuntu however now there isn't even an option to enable wireless. If anyone could possibly help me out with this I'd deeply appreciate it. I've not had to return to Windows for a good while and it's not something I want to have to do now.

  Read the article

• Can't connect to hidden network with BCM4313

  - by poomerang

  The wireless works fine with all the other wi-fi nets I have tried, the only problem is with this hidden network. I should add it's the only hidden network I've tried, so I am not sure if the problem is it being hidden or somethings else, but I've checked the settings of NetworkManager against another Ubuntu system (which can connect) and they appear to be the same, passphrase included. The network is using WPA2 Personal with AES encryption, I don't know how to check this setting but I believe it's the usual for WPA2, and therefore usually not a problem. Also, I can connect through ethernet, which should exclude any blacklisting of my device, I believe. I usually use brcmsmac drivers, I've tried also STA but the result is the same. I've also tried the suggestion from Unable to connect to hidden SSID with no luck output of lspci -v is 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Askey Computer Corp. Device 7175 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at d4000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: bcma, brcmsmac

  Read the article

• Do I need a wifi card to have internet access?

  - by Sarah

  I am attempting to set up a wireless network on 11.04, freshly download today. The router is on and working. However, I do not have a wifi "card" (which I am assuming is a little USB-type thing that allows internet access, but correct me if I am wrong) and every time I try to type in the MAC address and everything, nothing works. I also get the "firmware missing" error when I scroll over the signal strength, which I have tried looking up but have been unsuccessful with completely understanding it. I guess my main question is do I need another little device to be able to use wifi on my ubuntu? I do have an ethernet cable but another person is using it and I do not want to be tied down to that cable. the problem is that none of the wireless networks show up, however they show up when I go into Windows mode on my laptop. I get an error message at the top saying "firmware missing" which I have tried looking up but still have no straight answer for.

  Read the article

• Is there a taskbar applet to show the status of a remote host?

  - by Mathew

  At the end of the day I would like to be able to copy files to my home PC just in case I feel inspired to work on them in the evening. But I only want to do this if the PC is on already. (I can remote wake-on-lan the PC but I don't want to always be doing that). I would like some taskbar applet that shows the status of the PC and whether I can ssh into it or not. Obviously it would also be interesting to have an idea as to how long it is on for whilst I am at work as that gives a good indication of whether anyone is in or not. However being able to unobtrusively copy files to the remote machine is the main objective. Perhaps another approach is to run rsync on cron and if the remote host is not up then I guess it will fail. Is that correct? If anyone else has ideas on how to best sync a work and home PC then please do tell.

  Read the article

• Wireless speed drops over time and doesn't get up if not reconnected

  - by Vili Lehto

  I am using Ubuntu 12.10 64bit and I have a Asus PCE-N15 wireless card(in PCI-E slot). The problem is that first when I connect to my WiFi network the speed is just fine, and actually my link speed never drops, it shows a solid 150mb/s+ link speed and good signal. But the download and upload speeds drop dramatically after couple minutes of use and I have to reconnect to fix this. Network is type IEEE 802.11bgn and uses WPA2/AES encryption. I don't have similar problems on the windows side, and the network is working fine on every other device. iwconfig shows this: wlan0 IEEE 802.11bgn ESSID:"WLAN-AP" Mode:Managed Frequency:2.412 GHz Access Point: 00:1E:AB:05:EF:31 Bit Rate=300 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr=2347 B Fragment thr:off Encryption key:off Power Management:off Link Quality=61/70 Signal level=-49 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:2 Missed beacon:0 So the question is: Is there a way to fix this? Thanks in advance.

  Read the article

• How to share files and folders on a forum so that anyone can download without having an Ubuntu One account?

  - by ashok.biollay

  I just began to discover Ubuntu One. I upload a video on my account, and put it in a folder. I would like to know whether it is possible to share this folder or this file simply by giving the url in forum (in a message), so that anyone can download the file, with no need to have an Ubuntu One account. (a bit like PhotoBucket, where you can share pictures and videos and folders to people with ou without PhotoBucket, and anyone can download them) Thank you in advance for your answers.

  Read the article

• Temporary R+W CIFS share for non-root accounts?

  - by Coder

  I want to set up a cross platform mail client (Thunderbird), and so far I want to use NAS as a profile store. The NAS is CIFS based, and can be mounted on both Windows and Ubuntu. Also the locking works fine for mutex, and setup seems to work as a proof of concept. The problem is the Linux mount. Since I'm using a laptop, I'm not always connected to network, hence, I can't use the /etc/fstab to set up CIFS share with a modified group id. And the share has to be mounted using mount -t cifs ..., which causes it to be owned by root, and owned so badly, that it can't be chowned to the regular user account. This causes read only issues for Thunderbird, which seem to be solved if Thunderbird is launched via sudo. But I would like to avoid that and use a script to mount the share on-demand to a profile location, with profile based privileges and access rights. Is there a way to achieve that?

  Read the article

• How to manage permissions on a shared volume for OSX and ubuntu

  - by gentmatt

  On my mac I'm using an unjournaled HFS partition to share files between OSX 10.8 and Ubuntu 12.04. It was a nice thought at first, because Time Machine will automatically backup the volume in OSX, but I soon noticed that OSX and Ubuntu mess with the permission in a way that makes things messy for me. So, in order to fully view and change files, I keep using chmod to apply permissions that which will allow me to fully use a document. But I don't understand why I have to keep applying changes over and over. Is possible to set some kind of permission permanently so that both operating systems will respect permanently? I guess 777 will work, but I thought that this is not a smart thing to do. But as long as 'others' does not get full access (third seven), I see a lock icon on the file in ubuntu.

  Read the article

• How can I prioritize wireless networks with network-manager

  - by kynan

  Mostly I use my laptop in an environment where different wireless networks are available and I would like to preferably connect to one of those and only fall back to the other one if that one is not available. Is there any way of prioritizing which wireless networks network-manager preferably connects to? The only workaround I found so far was unchecking Connect Automatically in the options and re-enabling it when my preferred network is not available.

  Read the article

• Internet stopped working after aircrack install (can still connect to my router). Suggestions?

  - by Dan

  I'm sure I did something dumb during the install for aircrack, but I have no clue what. Like I said, I can connect to my router (not trying to crack, simply logging into it), I just can't get internet access. To make this more interesting, the machine is dual booted and when I log into Windows I have zero issues. I feel like some driver may have been messed up in the process, but I'm not sure if that's a reasonable assumption or how exactly to check that. Also, can't revert to backup as there are none. Suggestions on how to trouble-shoot would be appreciated. EDIT: Hard-wiring to the wall I can get internet access on the Ubuntu side... PS- I know this is a stretch as far as fitting the Ubuntu section, but no other stackoverflow sites seemed to fit better.

  Read the article

• Ubuntu connects to wireless but doesn't work!

  - by UbuntuUser990

  I just installed Ubuntu 14.04 LTS on my laptop, it connects to my wireless network and shows that it is connected, but when I try to load a webpage or do anything like download Steam for Dota 2, it doesn't work. When I try to connect my Facebook account to Ubuntu, it doesn't work. I want to be able to use Ubuntu with working internet access. What do I do?. ifconfig this shows up eth0 Link encap:Ethernet HWaddr 88:ae:1d:60:56:eb inet addr:192.168.1.13 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:24 errors:0 dropped:0 overruns:0 frame:0 TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1856 (1.8 KB) TX bytes:1856 (1.8 KB) When I type ping askubuntu.com this shows up ping: unknown host askubuntu.com

  Read the article

• Extremely slow transfer speed ubuntu -> Windows

  - by Hailwood

  I have two laptops, One is running Ubuntu 12.04 (EXT4) the other is running Windows 7 (NTFS). I am copying over 40gb of data (one file) from the Ubuntu laptop to the Windows Laptop. (Browse the shared folder on Ubuntu using Windows copy/paste) But I am getting transfer speeds topping out at ~700kb/s Surely this is not right. I am transferring via wifi on both laptops. My download speeds can reach 7-8mb/s on both laptops, so I know it is not the wifi cards or the router topping out. wlan0 Link encap:Ethernet HWaddr 84:4b:f5:db:b4:85 inet addr:192.168.1.66 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::864b:f5ff:fedb:b485/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11941185 errors:0 dropped:0 overruns:0 frame:0 TX packets:11306693 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10087111370 (10.0 GB) TX bytes:7843524888 (7.8 GB)

  Read the article

• Can see samba shares but not access them

  - by nitefrog

  For the life of me I cannot figure this one out. I have samba installed and set up on the ubuntu box and on the Win7 box I CAN SEE all the shares I created. I created two users on ubuntu that map to the users in windows. On ubuntu they are both admins, user A & B on Windows User A is admin and user B is poweruser. User A can see both shares and access them, but user B can see everythin, but only access the homes directory, the other directory throws an error. I have two drives in Ubuntu and this is the smb.config file (I am new to samba): [global] workgroup = WORKGROUP server string = %h server (Samba, Ubuntu) wins support = no dns proxy = yes name resolve order = lmhosts host wins bcast log file = /var/log/samba/log.%m max log size = 1000 syslog = 0 panic action = /usr/share/samba/panic-action %d security = user encrypt passwords = true passdb backend = tdbsam obey pam restrictions = yes unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes map to guest = bad user ; usershare max shares = 100 usershare allow guests = yes And here is the share section: Both user A & B can access this from windows. No problems. [homes] comment = Home Directories browseable = no writable = yes Both User A & B can see this share, but only user A can access it. User B get an error thrown. [stuff] comment = Unixmen File Server path = /media/data/appinstall/ browseable = yes ;writable = no read only = yes hosts allow = The permission for the media/data/appinstall/ is as follows: appInstall properties: share name: stuff Allow others to create and delete files in this folder is cheeked Guest access (for people without a user account) is checked permissions: Owner: user A Folder Access: Create and delete files File Access: --- Group: user A Folder Access: Create and delete files File Access: --- Others Folder Access: Create and delete files File Access: --- I am at a loss and need to get this work. Any ideas? The goal is to have a setup like this. 3 users on window machines. Each user on the data drive will have their own personal folder where they are the ones that can only access, then another folder where 2 of the users will have read only and one user full access. I had this setup before on windows, but after what happened I am NEVER going back to windows, so Unix here I am to stay! I am really stuck. I am running Ubuntu 11. I could reformat again and put on version 10 if that would make life easier. I have been dealing with this since Wed. 3pm. Thanks.

  Read the article

• Issue with setting up multiple IP addresses on ubuntu server installation

  - by varunyellina

  I want to setup two ip addresses on my system for access through lan. This is my config on my other system. Desktop Installation My desktop installation runs with multiple IP's added through networkmanager both through lan and wifi. Server Installation On my server install I've edited /etc/network/interfaces to the following. auto eth0 auto eth0:1 # IP-1 iface eth0 inet static address 172.16.35.35 network 172.16.34.1 netmask 255.255.254.0 broadcast 172.166.35.255 dns-nameservers 172.16.100.221 8.8.8.8 # IP-2 iface eth0:1 inet static address 172.16.34.34 network 172.16.34.1 netmask 255.255.254.0 gateway 172.16.34.1 broadcast 172.16.35.255 After restarting through "/etc/init.d/networking restart" I recieve "Failed to bring up eth0:1" What am I doing wrong? Thankyou.

  Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >