Search Results

Search found 18544 results on 742 pages for 'connection sharing'.

Page 54/742 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

• How to make a server check it's own availability on the web?

  - by Javawag

  Hi all, Just a quick question – my server is running at my house serving www pages at www.javawag.com. The problem is that my home internet connection keeps dropping randomly - for about 10 mins at a time. This is only an intermittent problem and will go away soon I hope. However, my server doesn't recover properly - when the connection comes back, I can still access it at 192.168.0.8 (locally) without any issue, but at www.javawag.com there's no reply! (Just an aside - my home internet connection is dynamic ISP, the domain www.javawag.com points to javawag.dyndns.org which in turn points to my IP, updated every minute by ddclient on the server) Is there some way for the server to check if it's accessible from the outside world periodically, and if not restart Apache/reboot? Oh, and if I reboot the problem fixes itself also! Javawag

  Read the article

• Can I run Linux on the HP Mini from Verizon Wireless, with a built-in 3G modem, and connect using the built in modem?

  - by Parker

  I apologize if my question made little sense, I am very tired at the moment. Anyway, Recently I purchases the HP Mini from Verizon Wireless. It runs on the Intel Atom processor and came with Windows 7 Starter Edition, which is quite possibly the worst and most restrictive OS I have ever used. I plan on installing CRUX, after doing a little research on minimal, free, Linux operating systems, as I am working on web programming using Python, among other things. My only worry is that, because my HP Mini uses a built in wireless card (and I have no wifi connection, only a 3G connection) that has a "mobile access" connection to Verizon wireless, I am not sure if after installing CRUX that I would still be able to connect using this option. I have never used Linux before, and am hoping this will work. So if anybody has experience with this...please answer, can I connect to vzw 3G with linux, using an internal mobile access card...

  Read the article

• How to make a server check it's own availability on the web?

  - by Javawag

  Hi all, Just a quick question – my server is running at my house serving www pages at www.javawag.com. The problem is that my home internet connection keeps dropping randomly - for about 10 mins at a time. This is only an intermittent problem and will go away soon I hope. However, my server doesn't recover properly - when the connection comes back, I can still access it at 192.168.0.8 (locally) without any issue, but at www.javawag.com there's no reply! (Just an aside - my home internet connection is dynamic ISP, the domain www.javawag.com points to javawag.dyndns.org which in turn points to my IP, updated every minute by ddclient on the server) Is there some way for the server to check if it's accessible from the outside world periodically, and if not restart Apache/reboot? Oh, and if I reboot the problem fixes itself also! Javawag

  Read the article

• Windows 7 - ICS - Xbox360

  - by Hailwood

  I am trying to connect my xbox360 to the internet through ICS using my laptop. I have done this a few days ago using the exact same hardware(so no hardware problems) The laptop can browse the internet. The laptop gets its settings though DHCP. I have enabled ICS on the Wireless connection (where the internet is coming from) I have set the xbox and the Wired connection on the laptop to obtain settings automatically. The issue is that the Wired connection only shows 'Unidentified Network'. What could i be doing wrong?

  Read the article

• Why is my wireless so slow compared to my wired download speed?

  - by Shawn

  I just used speedtest.net (using Firefox) to compare my wired connection speed with my wireless connection speed. With my current contract (with Videotron), I'm supposed to get Download speed: 8Mbps Upload speed: 1Mbps Here are the results of the speedtest.net test: Wired Ping: 14ms Download speed: 8.41Mbps Upload speed: 1.04Mbps Wireless Ping: 16ms Download speed: 0.18Mbps Upload speed: 0.98Mbps The difference in download speeds seems staggering to me since I did the test 1 meter aways from my router. Any clue as to why my wireless download speed is so low compared to my wired download speed? using Ubuntu 11.04 on an Acer Aspire 5536-5519 Oh and it might be worth mentioning that my girlfriend has no trouble at all with her wireless connection. No slowness at all. (She uses Firefox on Windows 7 on a Dell) Here's the results for the same test on her system: Ping: 22ms Download speed; 8.44Mbps Upload speed: 1.02Mbps

  Read the article

• Frequently getting booted from Securemote VPN-1 Connection

  - by Nick L.

  I connect to my office's network remotely through the Checkpoint SecuRemote E75 (R75) VPN application, but recently it's been causing me a lot of issues when connecting from home. I connect through a WRT54GL router running DD-WRT v24 firmware, so I have no clue if that affects anything. I took a dump of the logs for Checkpoint and here are the messages that populate when I get booted but I have no clue how to decipher them and my IT department is completely clueless in terms of resolving the situation. I'm thinking the router is blocking the keep alive connection or something along those lines, but I have no idea how to fix the problem. [ 2388 2932][30 Aug 22:47:49][TR_OFFICE_MODE] TR_OFFICE_MODE::TrOfficeMode::OmSendIpFrameCB: Not sending packet because it's not to the enc domain [ 2388 2932][30 Aug 22:47:50][TR_EVENTS] TR_EVENTS::Raise: Running registered cb... [ 2388 2932][30 Aug 22:47:50][TrComInf] TrComInf::TrComInfSendAsynchronic: __start__ 22:47:50.606 [ 2388 2932][30 Aug 22:47:50][TrComInf] TrComInf::TrComInf::TrComInfSendAsynchronic: Acquiring mutex [ 2388 2932][30 Aug 22:47:50][messaging] messaging::send_all: Sending Message {{ 2 }} , len 185 [ 2388 2932][30 Aug 22:47:50][tcpserver] TcpMultiPipe::pipe_if_send: Message (193 bytes) written successfully to socket 0x224 [ 2388 2932][30 Aug 22:47:50][TrComInf] TrComInf::TrComInf::TrComInfSendAsynchronic: Released mutex [ 2388 2932][30 Aug 22:47:50][TrComInf] TrComInf::TrComInfSendAsynchronic: __end__ 22:47:50.606. Total time - 0 milliseconds [ 2388 2932][30 Aug 22:47:50][TR_SRV2CL] TR_SRV2CL::SendNotification: Successfully sent notification of type TR_NOTIFICATION_TRAFFIC_IDLE [ 2388 2932][30 Aug 22:47:50][vna] vna_trap: received VNA_TRAP_FORWARD_PACKET [ 2388 2932][30 Aug 22:47:50][vna] vna_traffic_fwd_do : forwarding packet with 98 bytes [ 2388 2932][30 Aug 22:47:50][TR_OFFICE_MODE] TrOfficeMode::OmSendIpFrameCB: Packet to destination 192.168.162.15 of protocol 17 [ 2388 2932][30 Aug 22:47:50][TR_OFFICE_MODE] TR_OFFICE_MODE::TrOfficeMode::OmSendIpFrameCB: Not sending packet because it's not to the enc domain [ 2388 2932][30 Aug 22:47:51][vna] vna_trap: received VNA_TRAP_FORWARD_PACKET [ 2388 2932][30 Aug 22:47:51][vna] vna_traffic_fwd_do : forwarding packet with 98 bytes [ 2388 2932][30 Aug 22:47:51][TR_OFFICE_MODE] TrOfficeMode::OmSendIpFrameCB: Packet to destination 192.168.162.15 of protocol 17 [ 2388 2932][30 Aug 22:47:51][TR_OFFICE_MODE] TR_OFFICE_MODE::TrOfficeMode::OmSendIpFrameCB: Not sending packet because it's not to the enc domain [ 2388 2392][30 Aug 22:47:52][TracService] service_ctrl_ex: Called with ctrl_code 14 [ 2388 2392][30 Aug 22:47:52][TracService] service_ctrl_ex: System got SERVICE_CONTROL_SESSIONCHANGE message event type 4 session 2 [ 2388 2392][30 Aug 22:47:52][TracService] service_ctrl_ex: Console/remote disconnect has occured in session 2 [ 2388 2932][30 Aug 22:47:52][vna] vna_trap: received VNA_TRAP_FORWARD_PACKET [ 2388 2932][30 Aug 22:47:52][vna] vna_traffic_fwd_do : forwarding packet with 98 bytes [ 2388 2932][30 Aug 22:47:52][TR_OFFICE_MODE] TrOfficeMode::OmSendIpFrameCB: Packet to destination 192.168.162.15 of protocol 17 [ 2388 2932][30 Aug 22:47:52][TR_OFFICE_MODE] TR_OFFICE_MODE::TrOfficeMode::OmSendIpFrameCB: Not sending packet because it's not to the enc domain [ 2388 2932][30 Aug 22:47:52][TR_CONN_MANAGER] TR_CONN_MANAGER::ConnEnum: Returning connection at position 1 [ 2388 2932][30 Aug 22:47:52][TR_EVENTS] TR_EVENTS::Raise: Running registered cb... [ 2388 2932][30 Aug 22:47:52][TR_CONN_MANAGER] TR_CONN_MANAGER::ConnEventMainHandler: no gw handle [ 2388 2932][30 Aug 22:47:52][TR_CONN_MANAGER] TR_CONN_MANAGER::ConnEventMainHandler: Current connection state is TR_CONN_STATE_CONNECTED. Receiving event of type CONN_EVENT_SYSTEM_SESSION_LOGOFF. Connection handle = 1. System state: TR_SYSTEM_STATE_RUNNING [ 2388 2932][30 Aug 22:47:52][CONFIG_MANAGER] suspend_tunnel_while_locked return value false, because it is Default variable. Scope: site 12.43.159.10, gw NULL ,user USER [ 2388 2932][30 Aug 22:47:52][TR_CONN_MANAGER] TR_CONN_MANAGER::ConnEventConnectedHandler: no gw handle [ 2388 2932][30 Aug 22:47:52][TR_CONN_MANAGER] TR_CONN_MANAGER::ConnEventConnectedHandler: receive session logoff event while connected. cancelling connection Thanks all. :)

  Read the article

• ssh tunnel error "ssh_exchange_identification: Connection closed by remote host"

  - by Jacob Ewing

  I'm trying to use an ssh tunnel from my office machine to my home machine, and get an error when I try to use it. What I'm doing is starting one shell like so: ssh -gL 12345:my.home.domain:22 my.home.domain This is giving me a proper shell, no problem. What I normally do then is ssh to my home machine through this office machine, like so: ssh -p 12345 127.0.0.1 This has always worked for me, until last week, when I set up a new system on my home machine (switching from Ubuntu to Debian). Now I get an error. I can still open up my initial ssh connection, but when I try to use that tunnel, I get (on the office machine) this error: ssh_exchange_identification: Connection closed by remote host Also, when that happens, the open shell that I have the tunnelling set up through gets this line spat out at it: channel 3: open failed: connect failed: Connection timed out At which point, I'm at a loss. If any more info is needed, I'll be happy to post it. ============= further to that ============== After fiddling around further, I've found that I'm getting a different response from the server (my home machine that is) when I try to telnet in on the various ports. If I try: telnet my.home.domain 22 I get this back: Trying <my ip address>... Connected to <my domain>. Escape character is '^]'. SSH-2.0-OpenSSH_5.5p1 Debian-6+squeeze2 Which is what I would expect. After setting up the tunnel though, and then telnetting to that, I see this response: Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. ============== and further still ================== As per kbulgrien's suggestion, here is the output from the client machine with the -v option: ssh -vp 24600 127.0.0.1 OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug1: Connecting to 127.0.0.1 [127.0.0.1] port 24600. debug1: Connection established. debug1: identity file /home/jacob/.ssh/id_rsa type -1 debug1: identity file /home/jacob/.ssh/id_rsa-cert type -1 debug1: identity file /home/jacob/.ssh/id_dsa type -1 debug1: identity file /home/jacob/.ssh/id_dsa-cert type -1 debug1: identity file /home/jacob/.ssh/id_ecdsa type -1 debug1: identity file /home/jacob/.ssh/id_ecdsa-cert type -1 ssh_exchange_identification: Connection closed by remote host

  Read the article

• Convert ADO.Net EF Connection String To Be SQL Azure Cloud Connection String Compatible!?

  - by Goober

  The Scenario I have written a Silverlight 3 Application that uses an SQL Server database. I'm moving the application onto the Cloud (Azure Platform). In order to do this I have had to setup my database on SQL Azure. I am using the ADO.Net Entity Framework to model my database. I have got the application running on the cloud, but I cannot get it to connect to the database. Below is the original localhost connection string, followed by the SQL Azure connection string that isn't working. The application itself runs fine, but fails when trying to retrieve data. The Original Localhost Connection String <add name="InmZenEntities" connectionString="metadata=res://*/InmZenModel.csdl|res://*/InmZenModel.ssdl|res://*/InmZenModel.msl; provider=System.Data.SqlClient; provider connection string=&quot; Data Source=localhost; Initial Catalog=InmarsatZenith; Integrated Security=True; MultipleActiveResultSets=True&quot;" providerName="System.Data.EntityClient" /> The Converted SQL Azure Connection String <add name="InmZenEntities" connectionString="metadata=res://*/InmZenModel.csdl|res://*/InmZenModel.ssdl|res://*/InmZenModel.msl; provider=System.Data.SqlClient; provider connection string=&quot; Server=tcp:MYSERVER.ctp.database.windows.net; Database=InmarsatZenith; UserID=MYUSERID;Password=MYPASSWORD; Trusted_Connection=False; MultipleActiveResultSets=True&quot;" providerName="System.Data.EntityClient" /> The Question Anyone know if this connection string for SQL Azure is correct? Help greatly appreciated.

  Read the article

• chrooting user causes "connection closed" message when using sftp

  - by George Reith

  First off I am a linux newbie so please don't assume much knowledge. I am using CentOS 5.8 (final) and using OpenSSH version 5.8p1. I have made a user playwithbits and I am attempting to chroot them to the directory home/nginx/domains/playwithbits/public I am using the following match statement in my sshd_config file: Match group web-root-locked ChrootDirectory /home/nginx/domains/%u/public X11Forwarding no AllowTcpForwarding no ForceCommand /usr/libexec/openssh/sftp-server # id playwithbits returns: uid=504(playwithbits) gid=504(playwithbits) groups=504(playwithbits),507(web-root-locked) I have changed the user's home directory to: home/nginx/domains/playwithbits/public Now when I attempt to sftp in with this user I instantly get the message: connection closed Does anyone know what I am doing wrong? Edit: Following advice from @Dennis Williamson I have connected in debug mode (I think... correct me if I'm wrong). I have made a bit of progress by using chmod to set permissions recursively of all files in the directly to 700. Now I get the following messages when I attempt to log on (still connection refused): Connection from [My ip address] port 38737 debug1: Client protocol version 2.0; client software version OpenSSH_5.6 debug1: match: OpenSSH_5.6 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug1: permanently_set_uid: 74/74 debug1: list_hostkey_types: ssh-rsa,ssh-dss debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: client->server aes128-ctr hmac-md5 none debug1: kex: server->client aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST received debug1: SSH2_MSG_KEX_DH_GEX_GROUP sent debug1: expecting SSH2_MSG_KEX_DH_GEX_INIT debug1: SSH2_MSG_KEX_DH_GEX_REPLY sent debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user playwithbits service ssh-connection method none debug1: attempt 0 failures 0 debug1: user playwithbits matched group list web-root-locked at line 91 debug1: PAM: initializing for "playwithbits" debug1: PAM: setting PAM_RHOST to [My host info] debug1: PAM: setting PAM_TTY to "ssh" debug1: userauth-request for user playwithbits service ssh-connection method password debug1: attempt 1 failures 0 debug1: PAM: password authentication accepted for playwithbits debug1: do_pam_account: called Accepted password for playwithbits from [My ip address] port 38737 ssh2 debug1: monitor_child_preauth: playwithbits has been authenticated by privileged process debug1: SELinux support disabled debug1: PAM: establishing credentials User child is on pid 3942 debug1: PAM: establishing credentials Changed root directory to "/home/nginx/domains/playwithbits/public" debug1: permanently_set_uid: 504/504 debug1: Entering interactive session for SSH2. debug1: server_init_dispatch_20 debug1: server_input_channel_open: ctype session rchan 0 win 2097152 max 32768 debug1: input_session_request debug1: channel 0: new [server-session] debug1: session_new: session 0 debug1: session_open: channel 0 debug1: session_open: session 0: link with channel 0 debug1: server_input_channel_open: confirm session debug1: server_input_global_request: rtype [email protected] want_reply 0 debug1: server_input_channel_req: channel 0 request env reply 0 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req env debug1: server_input_channel_req: channel 0 request subsystem reply 1 debug1: session_by_channel: session 0 channel 0 debug1: session_input_channel_req: session 0 req subsystem subsystem request for sftp by user playwithbits debug1: subsystem: cannot stat /usr/libexec/openssh/sftp-server: Permission denied debug1: subsystem: exec() /usr/libexec/openssh/sftp-server debug1: Forced command (config) '/usr/libexec/openssh/sftp-server' debug1: session_new: session 0 debug1: Received SIGCHLD. debug1: session_by_pid: pid 3943 debug1: session_exit_message: session 0 channel 0 pid 3943 debug1: session_exit_message: release channel 0 debug1: session_by_channel: session 0 channel 0 debug1: session_close_by_channel: channel 0 child 0 debug1: session_close: session 0 pid 0 debug1: channel 0: free: server-session, nchannels 1 Received disconnect from [My ip address]: 11: disconnected by user debug1: do_cleanup debug1: do_cleanup debug1: PAM: cleanup debug1: PAM: closing session debug1: PAM: deleting credentials

  Read the article

• SSL connection error during handshake on Windows Server 2008 R2

  - by Thomas

  I have a Windows 2008 R2 Server that runs a HTTPS Tunneling service. The software uses a certificate that is provided via the Windows certificate store. The certificate is located in the local computer private certificates. It supports server and client authentication with signing and keyencipherment. Cert chain The certificate chain looks fine. It's a Thawte SSL123 certificate. Thawte Premium Server CA (SHA1) [?e0 ab 05 94 20 72 54 93 05 60 62 02 36 70 f7 cd 2e fc 66 66] thawte Primary Root CA [?1f a4 90 d1 d4 95 79 42 cd 23 54 5f 6e 82 3d 00 00 79 6e a2] Thawte DV SSL CA [3c a9 58 f3 e7 d6 83 7e 1c 1a cf 8b 0f 6a 2e 6d 48 7d 67 62] Server certificate Issues Most browsers accept the certificate without any warning. But IE 7 on Windows XP SP3 and Opera 12 on OSX just report an connection error. Opera complains: Secure connection: fatal error (552) https://www.example.com/ Opera was not able to connect to the server, because the server does not communicate via any secure protocol known to Opera. A connection test using openssl s_client -connect www.example.com:443 -state says: CONNECTED(00000003) SSL_connect:before/connect initialization SSL_connect:SSLv2/v3 write client hello A 52471:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:/SourceCache/OpenSSL098/OpenSSL098-35.1/src/ssl/s23_lib.c:182: ssldump -aAHd host www.example.com during curl https://www.example.com/ reports: New TCP connection #1: localhost(53302) <-> www.example.com(443) 1 1 0.0235 (0.0235) C>SV3.1(117) Handshake ClientHello Version 3.1 random[32]= 50 77 56 29 e8 23 82 3b 7f e0 ae 2d c1 31 cb ac 38 01 31 85 4f 91 39 c1 04 32 a6 68 25 cd a0 c1 cipher suites Unknown value 0x39 Unknown value 0x38 Unknown value 0x35 TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA TLS_RSA_WITH_3DES_EDE_CBC_SHA Unknown value 0x33 Unknown value 0x32 Unknown value 0x2f Unknown value 0x9a Unknown value 0x99 Unknown value 0x96 TLS_RSA_WITH_RC4_128_SHA TLS_RSA_WITH_RC4_128_MD5 TLS_DHE_RSA_WITH_DES_CBC_SHA TLS_DHE_DSS_WITH_DES_CBC_SHA TLS_RSA_WITH_DES_CBC_SHA TLS_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA TLS_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA TLS_RSA_EXPORT_WITH_DES40_CBC_SHA TLS_RSA_EXPORT_WITH_RC2_CBC_40_MD5 TLS_RSA_EXPORT_WITH_RC4_40_MD5 Unknown value 0xff compression methods unknown value NULL 1 0.0479 (0.0243) S>C TCP FIN 1 0.0481 (0.0002) C>S TCP FIN Thawte provides two Java based SSL Checkers. The Legacy Thawte SSL Certificate Installation Checker and the sslToolBox. Both validate the certificate under Windows XP but report connection errors under OSX and Windows 2008 R2.

  Read the article

• Close TCP connection when owner process is already killed

  - by Otiel

  I have a Windows service that - when it starts - opens some WCF services to listen on the 8000 port. It happens that this service crashes sometimes. When it does, the TCP connection is not released, thus causing my service to throw an exception if I try to start it again: AddressAlreadyInUseException: There is already a listener on IP endpoint 0.0.0.0:8000 Some observations: When running CurrPorts or netstat -ano, I can see that the 8000 port is still in use (in LISTENING state) and is owned by the Process ID XXX that corresponded to my service process ID. But my service has already crashed, and does not appear in the Task Manager anymore. Thus I can't kill the process to free the port! Of course, running taskkill /PID XXX returns: ERROR: The process "XXX" not found. When running CurrPorts or netstat -b, I can see that the process name involved in creating the listening port is System, and not as MyService.exe (whereas it is MyService.exe when my service is running). I tried to use CurrPorts to close the connection, but I always get the following error message: Failed to close one or more TCP connections. Be aware that you must run this tool as admin in order to close TCP connections. (Useless to say, I do run CurrPorts as Administrator...) TCPView is not much help either: the process name associated to the 8000 port is <non-existent>, and doing "End process" or "Close connection" has no effect. I tried to see if there was not a child process associated with the PID XXX using Process Explorer, but no luck here. If I close my service properly (before it crashes), the TCP connection is correctly released. This is normal, as I close the WCF service hosts in the OnStop() event of my service. The only way I found to release the connection is to restart the server (which is not convenient in a production environment as you can guess). Waiting does not help, the TCP connection is never released. How can I close the connection without restarting the Windows server? PS: found some questions extremely similar to mine.

  Read the article

• ssh client problem: Connection reset by peer

  - by yonix

  I'm having a really annoying problem on my Ubuntu laptop. I noticed it today, after upgrading to Ubuntu 11.04, although I'm not entirely sure this is the cause as I played with my ssh keys a few days ago. The problem is, whenever I try to ssh to ANY host I get the following error: Read from socket failed: Connection reset by peer running with -vvv gives the following output: OpenSSH_5.8p1 Debian-1ubuntu3, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to hostname [10.0.0.2] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /root/.ssh/id_rsa type -1 debug1: identity file /root/.ssh/id_rsa-cert type -1 debug1: identity file /root/.ssh/id_dsa type -1 debug1: identity file /root/.ssh/id_dsa-cert type -1 debug1: identity file /root/.ssh/id_ecdsa type -1 debug1: identity file /root/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 1.99, remote software version OpenSSH_4.2 debug1: match: OpenSSH_4.2 pat OpenSSH_4* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8p1 Debian-1ubuntu3 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "hostname" from file "/root/.ssh/known_hosts" debug3: load_hostkeys: loaded 0 keys debug1: SSH2_MSG_KEXINIT sent Read from socket failed: Connection reset by peer My /etc/ssh/ssh_config: Host * SendEnv LANG LC_* HashKnownHosts yes GSSAPIAuthentication no GSSAPIDelegateCredentials no I can connect to my laptop from any other server via ssh, and I can also ssh localhost from my laptop successfully. I can connect to all these other server from other laptops, and I don't see anything in the logs of the other servers regarding my failed attempt. I tried to stop iptables, didn't help. I tried several tricks I could find online with my /etc/ssh/ssh_config, but I was unsuccessful in solving the problem... Any ideas? Edit: This is the log from one of the hosts I try to connect to: May 1 19:15:23 localhost sshd[2845]: debug1: Forked child 2847. May 1 19:15:23 localhost sshd[2845]: debug3: send_rexec_state: entering fd = 8 config len 577 May 1 19:15:23 localhost sshd[2845]: debug3: ssh_msg_send: type 0 May 1 19:15:23 localhost sshd[2845]: debug3: send_rexec_state: done May 1 19:15:23 localhost sshd[2847]: debug1: rexec start in 5 out 5 newsock 5 pipe 7 sock 8 May 1 19:15:23 localhost sshd[2847]: debug1: inetd sockets after dupping: 3, 3 May 1 19:15:23 localhost sshd[2847]: Connection from 10.0.0.7 port 55747 May 1 19:15:23 localhost sshd[2847]: debug1: Client protocol version 2.0; client software version OpenSSH_5.8p1 Debian-1ubuntu3 May 1 19:15:23 localhost sshd[2847]: debug1: match: OpenSSH_5.8p1 Debian-1ubuntu3 pat OpenSSH* May 1 19:15:23 localhost sshd[2847]: debug1: Enabling compatibility mode for protocol 2.0 May 1 19:15:23 localhost sshd[2847]: debug1: Local version string SSH-2.0-OpenSSH_5.3 May 1 19:15:23 localhost sshd[2847]: debug2: fd 3 setting O_NONBLOCK May 1 19:15:23 localhost sshd[2847]: debug2: Network child is on pid 2848 May 1 19:15:23 localhost sshd[2847]: debug3: preauth child monitor started May 1 19:15:23 localhost sshd[2847]: debug3: mm_request_receive entering May 1 19:15:23 localhost sshd[2848]: debug3: privsep user:group 74:74 May 1 19:15:23 localhost sshd[2848]: debug1: permanently_set_uid: 74/74 May 1 19:15:23 localhost sshd[2848]: debug1: list_hostkey_types: ssh-rsa,ssh-dss May 1 19:15:23 localhost sshd[2848]: debug1: SSH2_MSG_KEXINIT sent May 1 19:15:23 localhost sshd[2848]: debug3: Wrote 784 bytes for a total of 805 May 1 19:15:23 localhost sshd[2848]: fatal: Read from socket failed: Connection reset by peer

  Read the article

• Any suggestions to improve my PDO connection class?

  - by Scarface

  Hey guys I am pretty new to pdo so I basically just put together a simple connection class using information out of the introductory book I was reading but is this connection efficient? If anyone has any informative suggestions, I would really appreciate it. class PDOConnectionFactory{ public $con = null; // swich database? public $dbType = "mysql"; // connection parameters public $host = "localhost"; public $user = "user"; public $senha = "password"; public $db = "database"; public $persistent = false; // new PDOConnectionFactory( true ) <--- persistent connection // new PDOConnectionFactory() <--- no persistent connection public function PDOConnectionFactory( $persistent=false ){ // it verifies the persistence of the connection if( $persistent != false){ $this->persistent = true; } } public function getConnection(){ try{ $this->con = new PDO($this->dbType.":host=".$this->host.";dbname=".$this->db, $this->user, $this->senha, array( PDO::ATTR_PERSISTENT => $this->persistent ) ); // carried through successfully, it returns connected return $this->con; // in case that an error occurs, it returns the error; }catch ( PDOException $ex ){ echo "We are currently experiencing technical difficulties. We have a bunch of monkies working really hard to fix the problem. Check back soon: ".$ex->getMessage(); } } // close connection public function Close(){ if( $this->con != null ) $this->con = null; } }

  Read the article

• How can I find the jdbc connection timeout of a hibernate session

  - by StevenWilkins

  I currently have a long running thread which uses a hibernate session to perform many updates. We currently have our c3p0 connection timeout set to 20 minutes and it's timing out sometimes because of the number of updates we're performing. The solution I have is to periodically return the connection to the pool via closing the session (we have hibernate configured this way) and get a new one. Upping the timeout is not desirable because the same pool is used for the entire application. The problem is I don't know when to return the connection to the pool because I don't know what the timeout of the connection is. I know what the current setting is in our property file, but that can be changed without my knowledge at any time so it's fragile. Having a counter and returning the connection based on the number of updates I've performed is not ideal but could be my option of last resort. I have a hibernate session, how can I retrieve the connection timeout of the jdbc connection which backs the session? Using the SessionFactory and SessionFactoryImpl classes are perfectly acceptable.

  Read the article

• servlet connection to DB

  - by underW

  Initially, after reading books on the subject, I firmly believed that the algorithm for working with a database from a servlet is as follows: create a connection - connect to the database - form a request - send the request to the database - get the query results - process them - close connection - OK. Now, with a better understanding of the practical side, I realized that nobody does it that way, and everything happens through a connection pool according to the following algorithm: initialize the servlet - create a connection pool - a request comes from a user - take a free connection from the pool - form a request - send the request to the database - get the query results - process them - return the connection back to the pool - ok. Now I have this problem: We have 100 users, they are divided into 10 groups, each group has it's own username and password to connect to the database. Moreover, each group may have different rights to the database. How am I supposed to use a connection pool in this situation? If I understand correctly, a pool is nothing more than just a group of similar connections with a single login and password. And here I have 10 pairs of username / password. It looks like I cannot use the pool in this situation. What should I do?

  Read the article

• Using gnome-boxes with Remote Desktop Connection

  - by lviggiani

  in the past I used to connect to my windows server from ubuntu with remmina (through rdp protocol). I've recently installed ubuntu gnome remix (12.10.1) and gnome-boxes and I'm wondering if I can do the same with gnome-boxes. I've tried creating a new item in gnome-boxes and entering as url "rdp://x.x.x.x" as I used to do in remmina bit it says that the rdp protocol is not supported. Unfortunatelly I cannot find any manual or documentation listing the supported protocol or giving instruction on how to connect to a remote desktop. Can someone help me please?

  Read the article

• Ubuntu 14.04:LTS , HPLIP loses USB connection to HP laserjet

  - by Gareth

  This is my first post, so please let me know if i have inadvertanly broken any rules. Problem There seems to be a problem with HPLIP and USB connections in ubuntu 14.04LTS. After upgrading i managed to get the printing to work but today it has broken. Initial Issue (Solved) After upgrading to unbutntu 14.04 LTS my printer lHP LaserJet 1018 stopped printing (code=12) Looking through the Forumsthere are several issues with printitng and HPLIP so I was able to troubleshoot this. The steps I took were : Reran HPdoctor Ran hp-check Un-installed and installed the latest version of HPLIP (3.14.4) Checked the USB connections lsusb and lsusb-v Re-ran hpcheck Removed the printer from HPLIP Re-ran hpcheck Manually configued HPLIP to the printer hp-setup-g <xxx:yyy> And this worked HPLIP was able to see the printer in the USB , test page printed and was happily working for a few weeks. Current Issue Printer Not working However today my wife complains the printer is not working and checking see that although HPLIP has the same error code and did not seem to be able to see the printer although running lsusb could see the printer. Initially thought this may be due to usb given a new bus/device after being turned on and off and went to repeat the steps above at the moment still seeing an error in that the HPLIP is complaining that it cannot see the device **error: Device not found. Please make sure your printer is properly connected and powered-on.** current Observations lsusb output ## Bus 002 Device 007: ID 03f0:4117 Hewlett-Packard LaserJet 1018 sudo hp-check output *> "duan@duan-Lenovo-B550:~$ sudo hp-check [sudo] password for duan: Saving output in log file: /home/duan/hp-check.log HP Linux Imaging and Printing System (ver. 3.14.4) Dependency/Version Check Utility ver. 15.1 Copyright (c) 2001-13 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Full Output output of hp-setup -g 002:007 window box "device not found please make sure your printer is properly connected and powered on" duan@duan-Lenovo-B550:~$ sudo hp-setup -g 002:007 [sudo] password for duan: > HP Linux Imaging and Printing System (ver. 3.14.4) Printer/Fax Setup > Utility ver. 9.0 > > Copyright (c) 2001-13 Hewlett-Packard Development Company, LP This > software comes with ABSOLUTELY NO WARRANTY. This is free software, and > you are welcome to distribute it under certain conditions. See COPYING > file for more details. > > hp-setup[18461]: debug: param=002:007 hp-setup[18461]: debug: > selected_device_name=None Fontconfig error: > "/etc/fonts/conf.d/65-khmer.conf", line 14: out of memory Fontconfig > error: "/etc/fonts/conf.d/65-khmer.conf", line 23: out of memory > Fontconfig error: "/etc/fonts/conf.d/65-khmer.conf", line 32: out of > memory hp-setup[18461]: debug: Sys.argv=['/usr/bin/hp-setup', '-g', > '002:007'] printer_name=None param=002:007 jd_port=1 device_uri=None > remove=False Searching for device... hp-setup[18461]: debug: Trying > USB with bus=002 dev=007... hp-setup[18461]: debug: Not found. > hp-setup[18461]: debug: Trying serial number 002:007 hp-setup[18461]: > debug: Probing bus: usb hp-setup[18461]: debug: Probing bus: par > error: Device not found. Please make sure your printer is properly > connected and powered-on. hp-setup[18461]: debug: Starting GUI loop. .. USB lead Works with the Windows 7 laptop Printer Works with windows 7 laptop Questions Is this a Bug with HPLIP or an issue with laptop/printer? Supplementary question if it is a bug what information is needed and where should it be sent ? Any suggestions on how to get the printer to work correctly with Ubuntu 14.04LTS/HPLIP 13.4.3 so that it stays working ?

  Read the article

• ZFS on Linux for RHEL/OEL NFS Sharing

  - by BBK

  I'm trying ZFS on Linux for Oracle Linux (OLE) 6.1 (Red Hat RHEL 6.1 compatible clone). I successfully compiled and installed spl and zfs on it for Oracle Unbreakable Kernel. Zfs is working and I created mirror by zpool create -f -o ashift=12 tank mirror sdb sdc Now I'm trying to share my zfs pool caled "tank/nfs" as mentioned at zfsonlinux site. zfs set sharenfs=on tank/nfs So I created tank/nfs and set nfs to on. Now I'm trying to mount nfs share at local host to test it by mount -t nfs4 127.0.0.1:/tank/nfs /mnt But I get mount.nfs4: mount system call failed So question is: How to share NFS Folder or iSCSI Volumes at OLE rightly and mount it with Linux Client via ZFS on Linux.

  Read the article

• Enable SMB file sharing on OS X - "Incorrect Password"

  - by Tim Robinson

  I have a Mac running Snow Leopard connected to an Active Directory domain. I can share folders on the Mac and view files from Windows without problems. When I try to enable my Mac account for write access through System Preferences, I'm prompted for my account's password. Even though I'm entering the right one, I get an "Incorrect Password" response. The same process works fine for the local Mac administrator account; it's the Active Directory account I'm having problems with. I followed the advice on this page on apple.com without success: (I used the Mac to reset my domain password, and re-created my login keychain) If you want to use a user account that existed before you installed Mac OS X 10.3 (Panther), you may need to reset the password for the account using Accounts preferences. Can anyone suggest what might be wrong? Until I fix this I can't write to my Mac file share from Windows.

  Read the article

• Sharing the same `ssh-agent` among multiple login sessions

  - by intuited

  Is there a convenient way to ensure that all logins from a given user (ie me) use the same ssh-agent? I hacked out a script to make this work most of the time, but I suspected all along that there was some way to do it that I had just missed. Additionally, since that time there have been amazing advances in computing technology, like for example this website. So the goal here is that whenever I log in to the box, regardless of whether it's via SSH, or in a graphical session started from gdm/kdm/etc, or at a console: if my username does not currently have an ssh-agent running, one is started, the environment variables exported, and ssh-add called. otherwise, the existing agent's coordinates are exported in the login session's environment variables. This facility is especially valuable when the box in question is used as a relay point when sshing into a third box. In this case it avoids having to type in the private key's passphrase every time you ssh in and then want to, for example, do git push or something. The script given below does this mostly reliably, although it botched recently when X crashed and I then started another graphical session. There might have been other screwiness going on in that instance. Here's my bad-is-good script. I source this from my .bashrc. # ssh-agent-procure.bash # v0.6.4 # ensures that all shells sourcing this file in profile/rc scripts use the same ssh-agent. # copyright me, now; licensed under the DWTFYWT license. mkdir -p "$HOME/etc/ssh"; function ssh-procure-launch-agent { eval `ssh-agent -s -a ~/etc/ssh/ssh-agent-socket`; ssh-add; } if [ ! $SSH_AGENT_PID ]; then if [ -e ~/etc/ssh/ssh-agent-socket ] ; then SSH_AGENT_PID=`ps -fC ssh-agent |grep 'etc/ssh/ssh-agent-socket' |sed -r 's/^\S+\s+(\S+).*$/\1/'`; if [[ $SSH_AGENT_PID =~ [0-9]+ ]]; then # in this case the agent has already been launched and we are just attaching to it. ##++ It should check that this pid is actually active & belongs to an ssh instance export SSH_AGENT_PID; SSH_AUTH_SOCK=~/etc/ssh/ssh-agent-socket; export SSH_AUTH_SOCK; else # in this case there is no agent running, so the socket file is left over from a graceless agent termination. rm ~/etc/ssh/ssh-agent-socket; ssh-procure-launch-agent; fi; else ssh-procure-launch-agent; fi; fi; Please tell me there's a better way to do this. Also please don't nitpick the inconsistencies/gaffes ( eg putting var stuff in etc ); I wrote this a while ago and have since learned many things.

  Read the article

• No more internet connection after update in 14.04 with Intel Dual Band Wireless AC 7260

  - by luis

  My Dell XPS 15 (haswell) was working fine until I stupidly accepted recently to apply Ubuntu updates. Since then, my wifi does not work (it shows "device not managed" when clicking wifi icon in toolbar). Even USB to Ethernet adapter does not seem to work. Bluetooth at least "sees" other bluetooth devices around... See below output from dmesg (dmesg |grep iwl) : [ 886.462459] iwlwifi 0000:06:00.0: irq 51 for MSI/MSI-X [ 886.462561] iwlwifi 0000:06:00.0: Direct firmware load failed with error -2 [ 886.462562] iwlwifi 0000:06:00.0: Falling back to user helper [ 886.463284] iwlwifi 0000:06:00.0: loaded firmware version 22.1.7.0 op_mode iwlmvm [ 886.475345] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 886.475433] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 886.475684] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 886.689214] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' Below the output from modinfo iwlwifi: filename: /lib/modules/3.13.0-29- generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko license: GPL author: Copyright(c) 2003-2013 Intel Corporation <[email protected]> version: in-tree: description: Intel(R) Wireless WiFi driver for Linux firmware: iwlwifi-100-5.ucode firmware: iwlwifi-1000-5.ucode firmware: iwlwifi-135-6.ucode firmware: iwlwifi-105-6.ucode firmware: iwlwifi-2030-6.ucode firmware: iwlwifi-2000-6.ucode firmware: iwlwifi-5150-2.ucode firmware: iwlwifi-5000-5.ucode firmware: iwlwifi-6000g2b-6.ucode firmware: iwlwifi-6000g2a-5.ucode firmware: iwlwifi-6050-5.ucode firmware: iwlwifi-6000-4.ucode firmware: iwlwifi-3160-7.ucode firmware: iwlwifi-7260-7.ucode srcversion: 1E6912E109D5A43B310FB34 alias: pci:v00008086d0000095Asv*sd00005490bc*sc*i* (a pack of lines of kind "alias: pci:xxxxx...." that I guess are not helpful) alias: pci:v00008086d0000095Bsv*sd00005290bc*sc*i* depends: cfg80211 intree: Y vermagic: 3.13.0-29-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: 66:02:CB:36:F1:31:3B:EA:01:C4:BD:A9:65:67:CF:A7:23:C9:70:D8 sig_hashalgo: sha512 parm: swcrypto:using crypto in software (default 0 [hardware]) (int) parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint) parm: amsdu_size_8K:enable 8K amsdu size (default 0) (int) parm: fw_restart:restart firmware in case of error (default true) (bool) parm: antenna_coupling:specify antenna coupling in dB (defualt: 0 dB) (int) parm: wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable, 2=enable (default: 0) (int) parm: nvm_file:NVM file name (charp) parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool) parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int) parm: power_save:enable WiFi power management (default: disable) (bool) parm: power_level:default power save level (range from 1 - 5, default: 1) (int) I downloaded the latest versions of iwlwifi firmware from git (git clone git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git; copy iwlwifi-3160-9.ucode iwlwifi-7260-9.ucode iwlwifi-7265-9.ucode to /lib/firmware and reboot) but as you can imagine it did not help. Update #1: Downloaded from http://wireless.kernel.org/en/users/Drivers/iwlwifi?action=AttachFile&do=get&target=iwlwifi-7260-ucode-22.15.8.0.tgz and copied the file into /lib/firmware. After reloading it with modprobe, it seems to be OK: [ 14.761283] iwlwifi 0000:06:00.0: enabling device (0000 -> 0002) [ 14.761472] iwlwifi 0000:06:00.0: irq 51 for MSI/MSI-X [ 14.772478] iwlwifi 0000:06:00.0: loaded firmware version 22.15.8.0 op_mode iwlmvm [ 14.800274] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 14.800349] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 14.800657] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 15.007048] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' However, clicking in wifi in the toolbar still shows "device not managed". Any clues? Many thanks! Luis

  Read the article

• Port forwarding + shared connection with Ubuntu

  - by Joey Adams

  Because my wireless router's ethernet ports are defective, I set up a shared wireless connection from my laptop (which has wifi) to my eMac (which does not) via a crossover ethernet cable. The laptop is behind a router as 192.168.1.131, and the eMac is behind the laptop as 10.42.43.1 . The laptop is running Ubuntu 9.10 (Karmic). I achieved the shared connection through NetworkManager Applet. I right-clicked on the network icon at the topright, went to Edit Connections, selected the Wired connection named "Auto eth0", clicked "Edit...", went to the "IPv4 Settings" tab, and selected the Method "Shared to other computers". The eMac can now access the Internet. Now I want to enable port forwarding. There's a game I want to play that needs port 6112 forwarded (both TCP and UDP) in order to host games. I set up the router to enable port forwarding for 192.168.1.131 (the laptop), but port forwarding still isn't available on the eMac. I suppose I need to pretend my laptop is a router and configure port forwarding on it, indicating that incoming connections to the laptop (192.168.1.131) should be forwarded to the eMac on the shared connection (10.42.43.1 ). Thus, packets coming into the router on port 6112 would be redirected to the laptop (by the router), then to the eMac (by the laptop). My question is, how would I do that on Ubuntu (in light of NetworkManager's presence)? Also, if I can't get this to work, does anyone mind hosting a comp stomp? :D

  Read the article

• router - Problem Sharing internet connection in my router

  - by luis velasco

  Hi we are 4 roomates at the university but I have a problem. One of my roomies is downloading torrents all the time. When somebody need make a call or doing something like you tube or a quiz using the internet conection. The internet is very slow.... I can not create a network using a computer as a proxy. I just need a good router (and in the budget no more than $50).. I just want to split 16MB. In a separated 4 x 4 mb (theoretically)..

  Read the article

• Loss of iPod nano connection via VirtualBox and iTunes

  - by user69245

  I use VirtualBox 4.12 with Ubuntu 12.04, and up until a couple of days ago I was able to sync my iPod nano, my iPod Classic and my iPad via Windows XP and iTunes. A few days ago, when I connected the iPod nano, iTunes told me it was in recovery and I'd have to Restore it. I did this, but when it started up again I was told it was still in recovery. I went through this loop a few times, and then I got it to work again, and synched successfully. Since then, I have been unable to sync my iPod nano, although both iPod Classic and iPad work fine. I have successfully synched the iPod on a laptop with Windows XP since then, but each time I connect it through VirtualBox I get the same error message. I have tried disabling the iPod service in (the VirtualBox version of) Windows, and find that the iPod isn't being mounted as a disc drive, which is what happens in Ubuntu, and on my Windows XP laptop. I've tried changing USB leads, and I've also booted Windows XP on my Ubuntu machine, and here iTunes recognises the iPod nano. As far as I know, I made no changes to the configuration of VirtualBox between the time it was synching satisfactorily and the time it failed. I don't think iTunes is at fault here, as the same version of iTunes syncs with the iPod nano on two different computers running Windows XP - I think it may be the way XP running in VirtualBox handles the mounting of the iPod. Any suggestions?

  Read the article

• Virtualbox: host only networking - proxy internet connection

  - by Russell

  I'll ask my question first, then give details about where I am coming from: Is it possible to use host only, then have ubuntu act as a proxy to provide internet access to windows? If so, how? I am trying to get the right combination of networking for my virtualbox windows client VM (win7). My host is ubuntu 10.10 (maverick). I believe I understand the basic network options (please correct me if I am incorrect): NAT - Host can't communicate with guest but guest has access to all host's adapters Host only - Separate adapter but guest has no net access Bridged - bridge an adapter in the host with the virtual adapter to give the host access to the host adapter I am trying to give my win guest internet access, but also access the host in a separate network. Bridged only works when the host is connected to the internet (this is a laptop) so when it's not connected the network is down. Thanks I appreciate your help.

  Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >