Search Results

Search found 1856 results on 75 pages for 'dvd'.

Page 50/75 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

• Monitor for HD video editing

  - by Kato

  I have been researching for days and nights on a good monitor to buy for a Mac Pro with an ATI Radeon 2600 XT (256mb). It will be used extensively for HD video editing (1080p) and photo editing, and likely also digital/3D animation next year(a lot of FCP + CS4). I am a student, so money is a little bit of an issue, but I want something that I'll be able to use semi-professionally after I'm done school, and am willing to finance something if it is worth the cost. I'm HOPING for something under $1000 though. The IPS Ultrasharps from Dell seem to be getting good reviews from other video editors. Accurate colour correction is a concern for me (hopefully something that covers Adobe spectrum), as well as a decent response time, HD resolutions, and DVI port. Also something with good gradient/definition in black areas, as this is difficult for editing on most LCDs. 1X1 pixel, brightness, good DVD playback etc. Hopefully this is not impossible to find for under $2000!

  Read the article

• Computer still in boot loop

  - by user2856410

  My computer is in a boot loop and despite all my efforts, I haven't been able to load windows XP with it. When the computer loads, I see some white loading bar at the bottom, then the windows XP loading screen, then the DELL boot screen, then windows XP loading screen, and it just keeps looping. The blue screen error is: UNMOUNTABLE_BOOT_VOLUME Stop: 0x000000ED (0x823D6C08, 0xC000009C, 0x000000000, 0x000000000) I have booted using Hiren's mini XP, and ran CHKDSK /f /r, but it didn't affect the boot loop. Is there anything else I can try to get my computer to start up? I don't have my windows XP disc, but I have a dvd burner on another computer, and can burn a downloaded ISO if it could help me get out of this loop. Thanks!

  Read the article

• How do I fix Handbrake mp4s that produce Error -2041 when loaded in QuickTime?

  - by magnifico

  After encoding a DVD video to MP4 using Handbrake 0.9.4(2009112300) using the High Profile preset, my video will not open in QuickTime. I receive the following error: Error -2041: An invalid sample description was found in the movie (Movie.mp4) Here is the preset used to encode the video: <Preset> <Category>Regular</Category> <Name>High Profile</Name> <Query>-e x264 -q 20.0 -a 1,1 -E faac,ac3 -B 160,160 -6 dpl2,auto -R 48,Auto -D 0.0,0.0 -f mp4 --detelecine --decomb --loose-anamorphic -m -x b-adapt=2:rc-lookahead=50</Query> <PictureSettings>true</PictureSettings> <Version>0.9.4</Version> </Preset> How can I adjust this preset or fix the files so that they will play in QuickTime?

  Read the article

• unable to install new versions of linux on my PC

  - by iamrohitbanga

  I have an MSI-RC410 motherboard with onboard ATI Radeon XPress 200 series Graphics card. I have used OpenSuse-11.0 on my PC for over an year. but when I tried to upgrade to OpenSuse-11.1, I managed to install it only to find that several features were missing. for example /dev/cdrom was missing. Also install DVD of Fedora 11 did not work. I have also tried Ubuntu-9.10 live cd. When I boot from the CD i get the initramfs command prompt. Still able to install old versions of these OSs. What is the reason for this behavior? Does it have to do anything with the new version of the linux kernel not being compatible with my hardware? What should i do to install new versions of Linux?

  Read the article

• Ubuntu 14.04 disk utility SMART self-test failed threshold not exceeded

  - by user2323470

  I'm using the "Disks" program in Ubuntu 14.04 (live DVD) to assess the health of a drive I suspect is failing. However, when I first opened the program, it showed that the overall health was OK and all assessments are OK as well. I then tried to run a short self-test, but now the overall assessment shows a red "SELF-TEST FAILED". In the details section it says "Last self-test failed (read)" and "threshold not exceeded". All individual assessments are still OK though!! What I don't understand is, does that mean that the test executed and determined that the drive is a goner, or does it mean that the test didn't actually execute properly?

  Read the article

• Under kvm, Vista guest OS install halts on black screen

  - by Isaac Sutherland

  I am using kvm on my ubuntu-server-10.04 amd64 dual core PC. I am trying to install a Windows Vista guest OS. The installation proceeds properly until the system reboot halfway into the installation process, at which point it stops on a black screen and CPU usage goes to near zero. I created the vm with virt-install as follows: virt-install -n vista --connect qemu:///system -r 1024 -vcpus 2 \ --os-type windows --os-variant vista \ --virt-type kvm --accelerate \ -c /dev/sr0 \ --disk path=/dev/main/vista-hd \ --network bridge=br0 \ --vnc --noautoconsole Where /dev/sr0 is the physical drive with the vista installation DVD, and /dev/main/vista-hd is a 20-GB lvm logical volume I created. A number of people seem to have had success installing vista under KVM, but I haven't been able to determine what is causing my problem. Ideas anyone?

  Read the article

• Use Internet Explorer 6 and 7 in Virtual Box.

  - by Sharon

  Hello. I am trying to install the vhds (virtual hard drive image) of IE6 on XP and IE 7 on XP packs available from Microsoft on Virtual Box. Virtual Box will only mount CD/DVD's and/or ISO's. How do I get it to use the Microsoft files? I need this to test web pages in IE6/IE7s. I am running Windows 7 Home Premium. Is there a way to do this, or another way that will allow me to load XP/IE6 and XP/IE7 in Virtualbox Edit: Ok I got it to work but it says XP must be updated in 3 days due to hardware changes. Microsoft said this would be activated til January 1st 2010. Is there a way to bypass that?

  Read the article

• Help importing video from old Sony digital tape HandyCam

  - by thatryan

  Some friends gave me their old HandyCam and a bunch of tapes asking me to put them on a DVD. The model is Sony DCR-TVR103 and it records onto Hi8 digital tapes. It has a firewire port also. I am trying to use import function in iMovie on OS X 10.6. Every import though the video is super fast, like playing in fast forward. Ever seen anything like this? How can I import this video? Thank you.

  Read the article

• Windows 7 EFI Partition Deleted

  - by Sam Clark

  I converted my Windows 7 GPT disk to dynamic, which resulted in it being unable to boot. So I used EaseUs Partition Master on my second Win 7 installation to convert the disk back to basic. Now, I have one partition, which is my C: drive, and I can't figure out how to recovery my EFI partition. I no longer see the "Windows" entry in my EFI boot menu. The Windows 7 repair on the install DVD doesn't see my installation. Please let me know how to restore the EFI partition.

  Read the article

• Moving my bcd from HDD to SSD - Windows 7

  - by lelouch

  I have windows 7 installed on my SSD, but the /boot/ and bootmgr are on my hard-drive. I want to move them to my SSD for faster booting times. So i figured that I can fix the problem using the Windows startup repair tool. I made a bootable windows 7 flash drive, and ran Windows startup repair. However, it exits with an error. I also can't see my OS in the list of installed OSs. I then tried fixing via the command prompt with bootrec /fixmbr, bootrec /fixboot, bootrec /rebuildbcd. Bootrec /rebuildbcd finds the OS, but gives me the error "The requested system device cannot be found" when i try fixing it. Does anyone know why this is failing? I read somewhere that the Windows Repair environment doesn't support a flash drive, which is why I'm getting that error. Is this true? Unforunately my dvd drive is playing up so I can't use it to test this.

  Read the article

• Robocopy Mirror Backup gone awry

  - by Aznfin

  I have created a simple batch file script for running Robocopy. It is set to make a backup of my user account folder to my external hard drive. Here's the parameters for Robocopy: ROBOCOPY "C:\Users\Finnly" "F:\Backups\Finnly (Backup)" /ZB /COPY:DAT /DCOPY:T /MIR /256 /MT:32 /XF *.log *.log* *.dat *.tmp *.temp *.old "ntuser*" "SyncToy*" "UpgKit.txt" ".recently-used.xbel" /XD ".gimp-2.6" ".thumbnails" ".VirtualBox" "AppData" "Application Data" "Adobe" "Camtasia Studio" "Cookies" "CyberLink" "DivX Movies" "DVD Architect Pro 5.0 Projects" "dwhelper" "GTA San Andreas User Files" "Lightroom" "Local Settings" "NetHood" "PrintHood" "Scripts" "temp" "Templates" "The KMPlayer" "Tracing" /R:3 /W:10 /V /TS /FP /ETA /LOG+:F:\Backups\Sync.log /TEE For some reason when I run it, it backs up the files and then it seems to back them up again. The size of my user account directory is 18.3 GB but the backup of it occupies over 30 GB. After reading the contents of the log generated, it is obvious that it's copying files more than once. Why is this happening? I'm running Windows Seven Home Premium 64-bit.

  Read the article

• autofs mac os x afp not loading as correct user?

  - by Stephen Furlani

  Hello, I am way out of my depth, and I am trying to get all of my nodes on a cluster to mount a drive on my head node. I've got /etc/auto_master and /etc/auto_afp configured according to Apple's "Autofs: Automatically Mounting Network File Shares in Mac OS X" White Paper: /etc/auto_master +auto_master # Use directory service /net -hosts -nobrowse,hidefromfinder,nosuid /home auto_home -nobrowse,hidefromfinder /Network/Servers -fstab /- -static /- auto_afp /etc/auto_afp /Volumes/userA -fstype=afp afp://userA:[email protected]:/ /Volumes/userB -fstype=afp afp://userB:[email protected]:/ I am logged into a compute-node as userA. automount appears to mount both /Volumes/userA and /Volumes/userB to head-node.local:/Users/userA/Documents/ even though I have usernames, passwords, and user-directory specified in the afp url. If I go and login with Finder - it mounts userB appropriately. File sharing and cd/dvd sharing is enabled on all computers involved. Am I doing the right thing, and if so, what did I do wrong? -Stephen

  Read the article

• Is the motherboard the cause of these errors?

  - by ianfuture

  Motherboard is : ASUS A7N8X-E Deluxe, Rev1.01, On start up get: "cmos checksum error - defaults loaded" error BIOS is reset everytime and can't boot to Windows off HDD. POST report is ok once I tell it there is no Floppy drive attached and not to seek it. The boot sequence starts then just as get to load windows safe mode options whole PC shuts down. BIOS is reset to defaults again. I've checked the battery and jumpers. Tried a known working battery. Changed Graphics card, changed memory, changed HD to one without an OS. Disconnected DVD drive. PSU is known to be ok. IN BIOS CPU is recognised correctly and memory is also recognised ok. So is it likely to be a bad motherboard or corrupted BIOS or something else? Thanks :)

  Read the article

• How can I tell a fresh ubuntu 9.0.4 install to boot from an external Mac OS X usb drive?

  - by Richard Dyce

  I have a reformatted Mac mini containing only a fresh install of Ubuntu 9.0.4. The Apple boot loader as been removed, so I can't hold down option, or the c key to get it to reboot form the install DVD. I do have an external drive (with both a usb and firewire interface available) with a bootable cloned OS X system on it. What steps do I need to go through to in order get grub to see the external drive, and to boot from it so that I can reformat the internal disk as an OS X drive?

  Read the article

• Proper 16:9 video size for non-HD 4:3 video (for youtube/vimeo)

  - by Xeoncross

  Since High Definition video came out on all the online sites it has changed the default aspect ratio of the player from 4:3 to 16:9. This means that for people posting SD video you have to resize some of your videos to get them to fit right. For example, NTSC DVD quality (aka 480i/p) is 720x480 pixels (width x height). However, low-end High Definition (720i/p) is 1280x720. Anyway, now that the video players are built for HD you will find that uploading standard quality videos will result in videos that are "letter boxed" which means they have extra black bars on the top and bottom (or sides). Correct me if I'm wrong, but in order to get a 720x480 video to fit a box that is designed for HD the best practice would be to crop some of it off so that it fits as 720x404 since: 16/9 = 1.78 (1.7777777777778) 720/405 = 1.78 405x1.78 = 720.9 The same would stand for 640x480 (old TV quality) video that would need to be 640x360 correct? I'm asking because I'm not sure about all this and whether this is the proper way to fix these letter-boxing/display problems.

  Read the article

• Prepare bootable Mac OS install usb on Windows

  - by Dave

  Hello, Is there any software out there that can simulate Disk Utility (Mac app) for Windows? I need to reinstall leopard on my Mac because I screwed something up on the current OS. The thing is, the DVD drive is broken on there, so I need to prepare a bootable USB drive from my Leopard DMG file. This is easily done with the Disk Utility app on the Mac. But seeing how my cannot even log on to my Mac right now, I don't know how to prepare that USB stick. The only other machine I have is a PC with Windows 7. If anyone has any suggestion, please help me out! Thanks so much!

  Read the article

• Can't play blu ray on sony vaio fz

  - by user19455

  Hi. I have a Sony Vaio FZ (VGN-FZ31M) with a blu ray drive. I have just recently purchased the 2001 Space Odissey in blu ray but haven't been able to play on my laptop. When I try to play it with WMP i get this: "Windows Media Player cannot play the DVD. The disc was created in a manner that the Player does not support." and this with VLC: "VLC cannot open MRL. Check log for details." I have once formatted the pc and done a clean install without the sony vaio recovery cd. Is it possible that it is necessary a specific blu ray driver that I have not installed? Thanks.

  Read the article

• Getting BootMgr not found errors repeatedly on Win7 x64

  - by abszero

  So here is the basic configuration of the box: Primary RAID 1 (Mirror, Bootable): 2x 300GB WD SATA drives AMD Phenom Quad Core x64 @2.2 ASUS M3N78 Pro Board 4GB RAM Win 7 Ultimate Additionally, this box is a Host OS for several CentOS Boxes via VirtualBox. The box runs like a champ but, for whatever reason, everytime I restart the machine I get a BootMgr not found error when the box tries to boot. I pop in my Win DVD, select 'Repair Windows' then 'Fix Start Up Problems' and everything works fine...once. When I restart the box again I have to go back through this process. Any ideas on what is going on?

  Read the article

• Recover from a recover partition when F11 doesn't work and windows is corrupt

  - by jherlitz

  I have someones presario V3000 laptop. It has a D drive which is the recovery partition. The user brought it to me and windows would no longer even boot up. I could only reload XP and try to find a way to recover from the recovery partition. However haven't been able to. I read, hold F11 down when booting up, but that didn't do anything, and the other item I read is to create the CDs from the software installed in the OS from the factory. Well that is the OS that went corrupt and is no longer there. A new reloaded version of XP is there now. Is there still a way I can either create recover CD's/DVD's or boot from the recovery partition?

  Read the article

• iMac goes black, makes clicking sound... thoughts?

  - by Josh

  This is the second time this has happened. The display on my Apple iMac (20-inch Late 2006) just went black, system was completely unresponsive to mouse/keyboard input, I could not SSH into nor ping the machine, and it didn't show up in ARD. I could hear a fairly loud clicking noise from inside which sounded like the DVD drive trying to seek -- but there is no disc in the drive. It could possibly be the hard drive... I pressed the power button and the system powered off, and now will not power on again. Thoughts / suggestions as to next course of action?

  Read the article

• Ubuntu not installed-Please Remove installation media and close tray and press enter

  - by Ram

  I have downloaded Ubuntu 12.04.1 LTS 32 bit, burned it on DVD and tried to install it on my PC. My PC is running in Windows 7 Ultimate 32 bit mounted on the C: drive. Now I want install Ubuntu along with my Windows 7. When I boot Ubuntu through the CD, It boots and the Ubuntu install windows opens It offers "Try Ubuntu" and "Install Ubuntu". I choose "Install Ubuntu" Then I go on to install Ubuntu with Windows(First Option)-install It shows some blank screen with some lines, and says "Please Remove installation media and close tray and press enter" Then the PC restarts and runs Windows 7 same as before normally. But Ubuntu is not installed. How to solve this problem and install Ubuntu on my PC properly? Note: I am an Android Developer. So I need to install Ubuntu for my Android Development purpose.

  Read the article

• How to fix bluescreen in windows 7 with multi-boot?

  - by Ismail Sensei

  I have HP laptop 6730S with two Operating systems : Windows 7 Ultimate 32bit Centos 6.4 64Bit The GRUB2 is not installed in MBR, use Windows' bootloader. After I choose Windows in the start, the blue-screen appears with unmountable_boot_volume problem so I tried some help from similar questions here ( use Command Prompt and enter the following command: chkdsk /R C: ). But the problem is, I can't get repair my computer it took so long and nothing happened after I waited more than 2H and when I put my Windows 7 DVD to boot it charge the files then same thing happened nothing show up so I couldn't use command prompt. But when I use Centos everything works just fine the D partition i can mounted normally but C partition it shows me error and tell me to go to windows and repair it with Chkdsk command and here is where I am stuck.

  Read the article

• Why is Latex so big?

  - by putmatrix

  On windows, MikTex comes in a DVD. It's several times bigger than a typical Linux distribution. This makes it impossible to carry Latex on a memory stick like I do with many other useful software. Why is it so big? I thought it was just a language or system, but I've never seen any programming language with gigabytes of libraries. It's just that there's a bad feeling when your Latex distribution takes up four gigabytes of space when you expect it to be more of, say, 200mb.

  Read the article

• Cannot access files after trying to upgrade Ubuntu

  - by Ola

  I tried to upgrade Ubuntu from 11.10 to 12.04. I left it for 24 hours but the upgrade did not complete. Hence I cancelled the upgrade. I thought I will copy all the files that I have to a DVD/CD and try try downloading a copy of Ubuntu. But now, I cannot open any file or copy them. I cannot even shutdown my laptop. I have many important files on my laptop. Can someone help me retrieve my files from my laptop? Regards Ola

  Read the article

• MS Office 2007 std, on a 2008R2 RDS session - additional language and proofing tools question

  - by dyasny

  Hi all, I have a terminal server, with a bunch of users running MS Office 2007 std in. Some of them have recently been asking for better multilanguage support. Since I'm in a select agreement, I've gone into the Volume Licensing Service Center and downloaded the following three ISOs: Office Multilanguage Packs 2007 (DVD) Office Multilanguage Packs 2007 (CD) Office Multilanguage Pack 2007 Service Pack 1 But having mounted the ISOs in my RDS host, I still can't install anything they contain. I am quite probably doing something wrong, or maybe I need to be running Office pro version? please F1

  Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >