Search Results

Search found 1923 results on 77 pages for 'dvd ripping'.

Page 50/77 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

  • Which part of the computer needs all the power from the PSU?

    - by Xeoncross
    A couple years ago I was building a new Core 2 Quad system and after reading all the reviews was convinced that I would need at least a 400 watt power supply unit (PSU). I bought a 500W Antec EarthWatts However, last year I bought a Kill-A-Watt power meter to test some things around our house and found that my PC was only using 80W of power while idle! (C2Q, 4GB RAM, SATA HD, & DVD burner) Well, here I am building another computer with a 65watt Core 2 CPU in it and I'm wondering if I can skimp out this time and get a 300watt or so unit since my usage doesn't seem to be what everyone claims it is. I'm sure that the people in the reviews who exhausted 500watt PSU weren't lying - so what is it that uses all that? The high-end dual SLI video cards? Lots of SATA drives? Overclocking?

    Read the article

  • Cannot install Windows 7 on new PC (BSOD during installation)

    - by andronz
    Yesterday I had received new hardware and tried to assemble all of it. But when I was installing Windows 7 x64 for two times I got a BSOD, and a error message like this: Your PC has rebooted unexpectly, installation will continue after reboot. I have checked everything and tried to install once more time. It was almost successful, Windows had installed, but I cannot format my disk, open cmd or control panel, boot from DVD etc. It's the first time I have assembled a PC, and I don't know where the problem is, in my hardware or in Windows. My components: MSI z77a-g43 Intel i5 3570k Seagate Barracuda (plug into sata3 slot 6 Gb, there I have also sata 3 Gb slot) Corsair XMS3 (4x4Gb) HIS IceQ Also in the BIOS, I have changed RAM frequency to DDR3 1600 and voltage to 1.65v

    Read the article

  • SATA-II motherboard and drives but only connected at SATA-I

    - by Shevek
    I have an Abit AB9 QuadGT motherboard which has a SATA-II controller. Connected to it I have a Kingston SSDNow V Series 64GB as boot drive and a Seagate Barracuda 7200.10 as a data drive. I also have 2 x Optiarc AD-7170S DVD burners attached by SATA. Both SSD and HDD are SATA-II and the optical drives are SATA-I. I have just run CrystalDiskInfo and this is reporting that both SSD and HDD are connected at SATA-I (1.5 Gbps), not SATA-II (3.0 Gbps). I have the BIOS set up to use SATA drives in IDE mode. So a few questions: Is CrystalDiskInfo reporting correctly? Are the optical drives causing the SSD & HDD to connect at the slower rate? Is there any setting to force the SSD & HDD to use SATA-II? I'm running Windows 7 Ultimate.

    Read the article

  • Play Halo on the Xbox360 Arcade

    - by Jeremy Rudd
    I'm looking at purchasing a Xbox360 because I've wanted to catch up with the Halo trilogy. Does the cheap Arcade edition console support Halo 2 Halo 3? Halo Wars? Would I be able to save my game progress in single player? Would I be able to play online in typical maps? General questions: Would I be able to play games using the DVD drive or do I have to download everything? Does the tiny HDD hurt even if I don't download any games, trailers or music? Are there any other differences in comparison to the Xbox360 Pro? I have a regular TV that uses the composite cable, so I don't need the HDTV support in the Pro edition.

    Read the article

  • Ubuntu 9.1 Install from Disc Stalls After "Install Ubuntu" Sleclection is Made - eMachine

    - by nicorellius
    I am trying to install Ubuntu 9.1 from the ISO on a CD (it needs to be this version) on an eMachine with a brand new Seagate hard disk. The CD boots OK, and I choose the language. Then I am presented with the choices: Try Ubuntu Install Ubuntu.... etc, etc... I have tried the top two choices several times (trying Ubuntu and installing it), but each and every time the installation stalls and the disc stops spinning right after I hit enter after choosing the option I want. I have tried different CD/DVD drives, changing the jumpers on both CD drives, different hard drives, and nothing works. Maybe there is a BIOS setting that is choking the installation? Any help would be appreciated.

    Read the article

  • How to install Snow Leopard Server over Regular Snow Leopard

    - by SeniorShizzle
    I'm in the ADC so I have legitimate access to a free copy of Snow Leopard Server and licence key which I need to use to test my Push Notifications. I downloaded the software, and when I opened the .dmg I saw "Click to install Snow Leopard Server" which I did, and then it prompted me to restart the computer to begin installation. When the computer restarted, however, it just booted into my regular OS X partition. I kept trying to no avail. Obviously I'm missing something stupid here but I'm not a server admin so I don't know what to do :) The dmg is almost 6GB so I can't burn a DVD of it. I really need your help! Thanks guys!

    Read the article

  • Can't upgrade Windows Server 2012 Essentials to Windows Server 2012 R2 Essentials

    - by Magnus
    So today was RTM of Windows Server 2012 R2 Essentials released. I immediately tried to do an in-place upgrade of an existing RTM 2012 Essentials to RTM 2012 R2 Essentials, but get: Windows Server 2012 Essentials cannot be upgraded to Windows Server 2012 R2 Essentials. You can choose to install a new copy of Windows Server 2012 R2 Essentials instead, but this is different from an upgrade, and does not keep your files, settings, and programs. You’ll need to reinstall any programs using the original installation discs or files. To save your files before installing Windows, back them up to an external location such as a CD, DVD, or external hard drive. To install a new copy of Windows Server 2012 R2 Essentials, click the Back button in the upper left-hand corner, and select “Custom (advanced)”. This seems a bit odd, is this really the case? I can't find anything in the official documentation stating that this upgrade isn't possible.

    Read the article

  • Windows Updates Fails Server 2008 0x80070490

    - by Mark Robinson
    I have a server with Windows Server 2008 Standard x64 Edition installed. This has been installed and running for several months and I have been able to successfully install previous Windows Updates. I have two pending updates that fail to install. (KB967723) Security update for Windows Server 2008 x64 Edition (KB976098) Update for Windows Server 2008 x64 Edition Fails with Error code: 80070490 Followed this off Microsoft support site, which basically says to repair Windows with the install DVD. When I get to the step to select upgrade I get the following error. Upgrade has been disabled. The upgrade cannot be started. To upgrade, cancel the installation and then choose to upgrade to a version of windows that is more recent then the version you are currently running. So basically feel like I've hit a dead end with out doing a complete reinstall. Any ideas ?

    Read the article

  • SATA 300 mobo and drives but only connected at SATA 150

    - by Shevek
    I have an Abit AB9 QuadGT motherboard which supports SATA 300 drives Connected to it I have a Kingston SSDNow V Series 64GB as boot drive and a Seagate Barracuda 7200.10 as a data drive. I also have 2 x Optiarc AD-7170S DVD burners attached by SATA Both SSD and HDD are SATA 300 and the optical drives are SATA 150 I have just run CrystalDiskInfo and this is reporting that both SSD and HDD are connected at SATA 150, not SATA 300. I have the BIOS set up to use SATA drives in IDE mode. So a few questions: Is CrystalDiskInfo reporting correctly? Are the optical drives causing the SSD & HDD to connect at the slower rate? Is there any setting to force the SSD & HDD to use SATA 300? I'm running Windows 7 Ultimate

    Read the article

  • What is the minimum power supply wattage needed for a Pentium 2.4GHz system?

    - by scottmarlowe
    It looks like I've got a dead Antec True 330 power supply in an older desktop that has an Intel D845PESV motherboard, a Pentium 2.4GHz processor, 2 dvd/cd writers, 2 hard drives, and other typical devices. I have an even older computer that is not being used that has a 200W power supply. Can a 200W power supply drive what I've listed above? Or, put another way, what is the minimum power supply specs for the above system? (A new 350W power supply will run me $30--so buying a new one is not a problem--but I'm curious about the question nonetheless).

    Read the article

  • Recover lost NTFS partition on SSD

    - by Emil
    Hello, About 2 month ago I upgraded my Dell Latitude E6500 laptop with a Corsair Force F120 SSD drive. Everything worked well until about a week or so back. I started the computer and was faced with a beep and a message saying "No boot sector on Internal HDD (IRRT). No bootable devices". Since I figured that the boot sector had somehow got corrupt I tried booting from the Windows 7 dvd in order to repair the boot sector. But the Windows 7 installation program only found a blank drive with 111GB of unallocated space. I panicked and brought the drive with me to work to let a colleague have a look at it. We made a disk image of the entire drive and ran the drive through Testdisk in Linux. Testdisk did not find any partitions. It appears that the drive has been completely erased... What has happened? What is causing this behavior on an SSD?

    Read the article

  • Windows could not update the computer's boot configuration.

    - by Luke Puplett
    Hello, I am trying to install Windows Web Server 2008 x64 (have tried 32-bit, too) onto an IBM eServer 326m and am getting the following error message some time after the unpacking files section: Windows could not update the computer's boot configuration. Installation cannot proceed. I can repair the boot information using the Repair option in the WinPE bit of the setup, and it reboots into the Windows installation, so it has good boot data on the drive. Just to complicate things, the server does not have a DVD-ROM so I'm installing from HDD to HDD, both SATA, one an SSD. I've tried each drive in isolation, e.g. removing the SSD and installing from spindle onto itself, same error every time. Flashed IBM BIOS, too. Thanks for your help. Luke

    Read the article

  • Two SATA HDDs connected using a Black Duet HDD Docking Station via eSATA to my Laptop, second drive

    - by leeand00
    Hi I am using a BlacX Duet HDD Docking Station to connect a 1TB WD Caviar Black SATA HDD (WD10000LSRTL) and a HITACHI SATA DESKSTAR (0S00163) to my G51VX (BestBuy) laptop via the eSATA port. When I plug in both HDDs in to the Docking Station, connect the docking station to my laptop and start Windows 7 (64-bit Ultimate), only the HDD in the first drive in the port actually shows up in My Computer and Disk Management. If I swap the drives positions I can get them both to work, but never at the same time. I also checked in the bios settings on the laptop, under Advanced-IDE Configuration-SATA Operation Mode, and it displays: SATA Operation Mode: [Enhanced] AHCI Port0 [Hard Disk] Device: Hard Disk Vendor: ST9320421AS LBA Mode: Supported S.M.A.R.T.: Supported AHCI Port5 [Hard Disk] Device: Hard Disk Vendor: Hitachi HDS721010CLA332 Size: 100.00 GB LBA Mode: Supported S.M.A.R.T.: Supported There should be a third drive, but I'm not certain why it is not being picked up. Additionally, before I played around with the settings in the IDE configuration, it used to display the DVD as well.

    Read the article

  • Vista Startup Repair cannot repair my Toshiba Laptop (L300D)

    - by tdot
    I installed some updates, and now the computer doesn't boot up, it just keep's telling me to go to repair, which doesn't fix the problem. I see the BSOD on startup, but it flashes by too quick. (I also don't have Vista on DVD to do a reinstall if I need to) This is what I get from the Startup Repair details Problem Event Name StartupRepair V2 Problem Signature 01: External Media Problem Signature 02: 6.0.6001.18000.6.0.6001.18000 Problem Signature 03: 2 Problem Signature 04: 131074 Problem Signature 05: BadDriver Problem Signature 06: NoBootFailure Problem Signature 07: 0 Problem Signature 08: 0 Problem Signature 09: unknown Problem Signature 10: 1168 OS Version: 6.0.6001.2.1.0.256.1 Local ID: 1033 Any help will be appreciated. Thanks.

    Read the article

  • Build a RAID-5 USB Array or NAS?

    - by TK Kocheran
    I'm looking to build a RAID-5 or RAID-6 hard disk array to be used as a centralized backup location for my home network. I have a lot of 4-8GB DVD ISO files which I intend to serve over the network to my TV using DLNA or something similar. I need decent write times, fast read times, and preferably a way to connect this array to my network router over USB. I'll probably be using ext3/4 on it (I'd use btrfs if my router supported it :-[). Is there a way to build a RAID array that is accessible over USB? I'm kind of new to this and most guides assume you're running a RAID array inside your machine. I need at least 5TB of space, and I need redundancy, so I prefer RAID-6. How can I go about accomplishing this?

    Read the article

  • how change nginx temp & log folder or disable logging completely

    - by Ehsan Khodarahmi
    I'm running nginx 1.3.5 under windows seven, I need to execute nginx directly from a read-only media (CD or DVD), but when I want to run it, it fails with this error: nginx: [alert] could not open error log file: CreateFile() "logs/error.log" fail ed (5: Access is denied) 2012/08/28 13:52:46 [emerg] 5604#2864: CreateDirectory() "J:\nginx-1.3.5/temp/client_body_temp" failed (5: Access is denied) where J is my CD-ROM drive letter. I've changed nginx.conf to disable logging completely, but seems anyway it still tries to build a file named 'error.log' in '/logs' folder & some extra temporary contents in '/temp' folder at the startup, so I want to change 'logs' & 'temp' directory path to windows temp folder (%temp%), but I dont have any idea that how can I do it. Also I want to know why nginx still creates 'logs/error.log' after disableing error logging ?

    Read the article

  • Error Message: Primary Slave Drive - ATAPI Incompatible

    - by Jaleel Dwight
    So I recently switched towers and now, all of a sudden, I'm getting this error message as soon as I boot my system. The error message reads "Primary Slave Drive - ATAPI Incompatible". This has really been frustrating since there's NO Primary Slave Drive even installed in my computer!! I have one hard drive installed which is recognized as the Primary Master & a DVD Drive which is recognized as the Secondary Master. My old system ran flawlessly. I'm beginning to think maybe my motherboard is bugging out cuz I fail to understand how it can be telling me that a "nonexistent" drive is incompatible. Any suggestions??

    Read the article

  • How do I remove a repository of yum

    - by sunil
    When I search for a package in yum(centos 6), it tries to search in a repro named 'c6-media' And it gives a bunch of errors as follows file:///media/CentOS/repodata/repomd.xml: [Errno 14] Could not open/read file:///media/CentOS/repodata/repomd.xml Trying other mirror. file:///media/cdrecorder/repodata/repomd.xml: [Errno 14] Could not open/read file:///media/cdrecorder/repodata/repomd.xml Trying other mirror. file:///media/cdrom/repodata/repomd.xml: [Errno 14] Could not open/read file:///media/cdrom/repodata/repomd.xml Trying other mirror. Error: Cannot retrieve repository metadata (repomd.xml) for repository: c6-media. Please verify its path and try again Obviously the error seems to say that yum is trying to search for the CD/DVD which installed the OS. I do not have it now. All I want to do now is to delete this repository from yum. I went to the package manager graphical tool and removed this from the sources. Seems yum and the graphical tool do not use the same config. This is just my guess.

    Read the article

  • XBMC: Viewing podcasts in 'Library Mode'

    - by greggannicott
    I'm having a great time getting to know XBMC, and so far for the most part I've been really happy with the results. I was chuffed when I followed the advice on this SU post and added TWiT as a video podcast with ease. However, when I go into Library Mode I can no longer access the podcasts I've added. I realise that one simple work-around is to come out of Library Mode to view podcasts, but in order to keep everything as simple (and appealing) to my wife as possible I'd rather remain in Library Mode so that on the rare occasion she wants to watch a DVD, she can do so without my help. Does anyone know a way to display podcasts in library mode? If this isn't possible is there a more elegant solution/work-around to going back and forth between library mode? Many thanks.

    Read the article

  • Windows 7 MSDN version

    - by Larry Branham
    I recently purchased a copy of Windows 7 online. Upon trying to install, it stopped and I was told that it could not find a 64 bit driver for my CD/DVD and I could not finish install. I contacted Microsoft and was told that this was something called an MSDN version according to the product key and that was the reason for the problem. They also said is was illegal to sell it to me. The company I bought it from never returned my calls or emails and luckily I got money back through Amazon. Amazon didn't even want me to send it back. Anyway my question is, is there anyway to load this onto my system and will I have problems or should I just throw it out? Any help would be great. Thanks

    Read the article

  • Problems with kickstart script, partition info crashes deployment

    - by tore-
    Hi, Currently testing cobbler, but have problem with the kickstart script when the partition information is loaded. Here is my ks: http://pastebin.ca/1824343 I can't figure out what is the problem with the partsection at all. Without it, it works. I've even tried autopart. If the entry is removed, it works, but of course I have to provide the installer with partition information. Under the kickstart an python exception is raised. I get a Errno 2 No such file or directory. My Apache logs states: File does not exist: /var/www/cobbler/links/CentOS-5.3-x86_64/images/updates.img File does not exist: /var/www/cobbler/links/CentOS-5.3-x86_64/disc1 File does not exist: /var/www/cobbler/links/CentOS-5.3-x86_64/images/product.img But without the part information, no error occours. What am I not seeing? Cobbler 2.0.3, imported the CentOS 5.3 x86_64 DVD, PXE booting from a Xen guest.

    Read the article

  • Eee PC - Create USB Recovery Drive w/ Files Copied From Recovery Partition

    - by nedm
    I have an Eee PC 1005HAB whose hard disk has failed. I have no recovery CD/DVD, but I did previously back up the contents of the recovery partition, and would like to use them to create a bootable USB to reinstall the factory settings on the new hard drive. Since I simply copied all the files in the recovery partition, rather than hitting F9 during boot and running through the process to create a recovery disk or drive, how do I now use the files to create a bootable USB drive that will do the recovery? In the BIOS I have disabled boot booster and set external drives to the top of the boot priority, but simply copying all the recovery partion files to a usb doesn't allow it to be booted from. I've downloaded the HP utility for creating bootable USB drives and have tried using it to make the USB drive bootable, but I'm not sure what to do with the ghost image and utilities from the recovery partition to get the process to start properly. Thanks in advance for any help.

    Read the article

  • Why should I use cobbler over normal PXEBOOT server?

    - by luckytaxi
    Maybe it's me but I find it easier to manage my simple pxeboot server just by editing the default file under /tftpboot/pxelinux.cfg. I have my kickstart file available over NFS along with the DVD extracted to a centralize mount point. Other than PXEBOOT, what benefit would I get from running cobbler? It was confusing at first but I finally got the hang off it. The only benefit I see is being able to force a server to install an OS on demand. Anything else?

    Read the article

  • Where can I find a useful Unicode fallback font for Mac OS X?

    - by Stephen Jennings
    On every browser I've tried (Firefox, Safari, Chrome, and Omniweb), when I go to a web page containing somewhat less-common characters, I can't see the glyphs. For example, on the Wikipedia page for the Bengali Language, the very first line contains a string of squares; on Windows, I can see the Bengali writing. On Windows, as long as I have the Arial Unicode MS font installed, these characters fall back to that font and display properly. Mac OS X doesn't seem to ship with a font containing these Unicode characters (it has Arial Unicode MS, but it must be a subset of the Windows version because Bengali doesn't display in that font). I checked on my Snow Leopard DVD and I installed "Additional Fonts" from the Optional Installs package, but I'm still missing many languages. Is there any good, free font that contains a large collection of languages? I know creating fonts is difficult and time-consuming, but it seems like including at least one font like this with operating systems should be standard by now.

    Read the article

  • Good HDMI splitter/switch solution

    - by Mehper C. Palavuzlar
    I have a full HD TV which has only 2 HDMI ports on it. Since I have more than 2 devices I connect to TV (e.g. laptop, game console, DVD player), it becomes uncomfortable to plug in and plug out HDMI cables every time I need to use the relevant device. I need a cheap solution to increase the number of my HDMI ports at least to 3. What type of splitter/switch do you recommend? Does the quality of splitter matter, or do they all produce the same audio & video quality?

    Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >