Search Results

Search found 14924 results on 597 pages for 'kernel mode'.

Page 50/597 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

• About Sdram software :Self-refresh mode

  - by student_pdas

  For power management we have to put system in deep sleep(system sleep) mode and for this we have to put SDRAM in self refresh mode. Can anyone tell the steps to set SDARM in self refresh mode. I tried SDRAM configuration register's ,I found that the SDRAM do goes to self-refresh mode[we probed the SD clk out] however system crashes in some scenarios while coming out of sleep.

  Read the article

• External USB hard-drive changing drive letter

  - by Sydius

  I have a Seagate FreeAgent Go external USB hard drive that was mounted but mysteriously decided to reconnect itself: Sep 30 15:07:06 feinman kernel: [243901.551604] usb 1-1.2: USB disconnect, device number 3 Sep 30 15:07:06 feinman kernel: [243901.553828] sd 6:0:0:0: [sdb] Synchronizing SCSI cache Sep 30 15:07:06 feinman kernel: [243901.553893] sd 6:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Sep 30 15:07:10 feinman kernel: [243905.336557] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd Sep 30 15:07:10 feinman kernel: [243905.431219] scsi7 : usb-storage 1-1.2:1.0 Sep 30 15:07:11 feinman kernel: [243906.427207] scsi 7:0:0:0: Direct-Access Seagate FreeAgent Go 0148 PQ: 0 ANSI: 4 Sep 30 15:07:11 feinman kernel: [243906.428303] sd 7:0:0:0: Attached scsi generic sg1 type 0 Sep 30 15:07:11 feinman kernel: [243906.430317] sd 7:0:0:0: [sdc] 625142447 512-byte logical blocks: (320 GB/298 GiB) Sep 30 15:07:11 feinman kernel: [243906.430860] sd 7:0:0:0: [sdc] Write Protect is off Sep 30 15:07:11 feinman kernel: [243906.430865] sd 7:0:0:0: [sdc] Mode Sense: 1c 00 00 00 Sep 30 15:07:11 feinman kernel: [243906.431386] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 30 15:07:11 feinman kernel: [243906.493674] sdc: sdc1 Sep 30 15:07:11 feinman kernel: [243906.496109] sd 7:0:0:0: [sdc] Attached SCSI disk It changed from sdb to sdc, causing a number of problems for me. What can I do to further track down the cause? I thought it might be a problem with it sleeping but when I cat /sys/class/scsi_disk/6\:0\:0\:0/allow_restart, I see that it's already 1.

  Read the article

• downgrade the system

  - by deddihp

  hello, actually i have some business to downgrade the kernel. I downgrade from kernel 2.6.31-14 (ubuntu 9.10) to 2.6.26.8. And then i got the following error in my boot process : warning: unable to find a suitable fs in /proc/mounts, is it mounted ? use --subdomainfs to override what is that mean anyway ? thanks.

  Read the article

• Where is the Linux source kept in a Rackspace Gentoo VPS?

  - by obvio171

  I'm emerging udev and it complains it couldn't find the kernel sources under /usr/src/linux (there's nothing inside /usr/src/ indeed). As a result, it tries to take the version from the currently running kernel and messes up thinking it's an older version than what it needs (when it actually isn't). So where are the sources so that I can properly link to them? And could I have done something wrong for them not to be in the right place?

  Read the article

• DD-WRT RIP2 Router mode configuration

  - by Eduardo

  Can anybody tell me why my wireless router only redirects traffic to ADSL modem when it is on Gateway mode? These are the configurations when it is on RIP2 Router mode: ADSL Modem: ------------ LAN IP: 10.1.1.1 Subnet mask: 255.0.0.0 RIP v2 enabled in both directions Route: destination: 192.168.1.0 Subnet mask: 255.255.255.0 Gateway: 10.1.1.2 Wireless Router (DD-WRT) ------------------------ WAN IP: 10.1.1.2 WAN Subnet mask: 255.0.0.0 LAN IP: 192.168.1.1 LAN Subnet mask: 255.255.255.0 Operating mode: RIP2 Router Static Route: Destination LAN NET: 10.0.0.0 Subnet Mask: 255.0.0.0 Gateway: 10.1.1.1 Interface: LAN & WLAN

  Read the article

• Firefox 3.6 Kiosk mode

  - by David Murdoch

  I've developed a FF 3.6+ only web app that needs to run in kiosk mode. I has assumed that since nearly every other browser has a built in kiosk switch FF would have this too. I haven't been able to find this. http://kb.mozillazine.org/Command_line_arguments does not have a kiosk mode listed. R-Kiosk doesn't work in FF 3.6. Apparently their is a new "experimental" version of R-Kiosk (v0.8.0) but I can't find it anywhere. Does anyone know of anyway to put Firefox in kiosk mode? I'd be especially great if the solution forced full screen, hid all toolbars and context menus, disables (Ctrl+) Alt + * combos, and disables "Windows Key" + * combos.

  Read the article

• RAID 0 Volatile Volume Cache Mode configuration

  - by SnippetSpace

  I discovered that in IRST there is an option to set a cache mode for my 3 ssd raid 0 array. I've read the documentation by Intel and have some questions: Are there any overall benefits/risks from enabling cache mode? As I'm on a laptop, would write back be recommended? I read it increases chance of data loss on power interruption. What is the difference between how windows handles data integrity and the intel driver? Read only mode seems to have the benefit of faster reads, does it have any downsides? Thanks for your help guys!

  Read the article

• Error 0x6ba (RPC server is unavailable) when running sfc /scannow on Windows XP in Safe Mode

  - by leeand00

  I think that my mup.sys file is corrupt. I received the following error when trying to access a network share that was located on my Windows 7 box, from my Windows XP box: No network provider accepted the given network path. After reading this I attempted to follow the directions by rebooting my computer into safe mode. After I run "sfc /scannow" I receive the following error message: The specific error code is 0x000006ba [The RPC server is unavailable]. When I go into Services, it says that the Remote Procedure Call (RPC) service is running but that the Remote Procedure Call (RPC) Locator is not running. When I try to start the Remote Procedure Call (RPC) Locator, it gives me an error saying: Error 1084: This service cannot be started in Safe Mode What can I do about this? If it can't find the Remote Procedure Call service in safe mode?

  Read the article

• How Linux is Built [Video]

  - by Asian Angel

  Many of the devices that we use each day such as computers, mobile phones, televisions, and more run on Linux, but how is Linux built? This wonderful video from The Linux Foundation shows just how it is done. How Linux is Built [via OMG! Ubuntu!] How To Customize Your Android Lock Screen with WidgetLocker The Best Free Portable Apps for Your Flash Drive Toolkit How to Own Your Own Website (Even If You Can’t Build One) Pt 3

  Read the article

• openGL ES - change the render mode from RENDERMODE_WHEN_DIRTY to RENDERMODE_CONTINUOUSLY on touch

  - by Sid

  i want to change the rendermode from RENDERMODE_WHEN_DIRTY to RENDERMODE_CONTINUOUSLY when i touch the screen. WHAT i Need : Initially the object should be stationary. after touching the screen, it should move automatically. The motion of my object is a projectile motion ans it is working fine. what i get : Force close and a NULL pointer exception. My code : public class BallThrowGLSurfaceView extends GLSurfaceView{ MyRender _renderObj; Context context; GLSurfaceView glView; public BallThrowGLSurfaceView(Context context) { super(context); // TODO Auto-generated constructor stub _renderObj = new MyRender(context); this.setRenderer(_renderObj); this.setRenderMode(RENDERMODE_WHEN_DIRTY); this.requestFocus(); this.setFocusableInTouchMode(true); glView = new GLSurfaceView(context.getApplicationContext()); } @Override public boolean onTouchEvent(MotionEvent event) { // TODO Auto-generated method stub if (event != null) { if (event.getAction() == MotionEvent.ACTION_DOWN) { if (_renderObj != null) { Log.i("renderObj", _renderObj + "lll"); // Ensure we call switchMode() on the OpenGL thread. // queueEvent() is a method of GLSurfaceView that will do this for us. queueEvent(new Runnable() { public void run() { glView.setRenderMode(RENDERMODE_CONTINUOUSLY); } }); return true; } } } return super.onTouchEvent(event); } } PS : i know that i am making some silly mistakes in this, but cannot figure out what it really is.

  Read the article

• Command line mode only -- successful login only brings me back to login screen

  - by seth

  whenever I log in the screen goes black, I see a glimpse of terminal-esque text, and then it brings me back to the log in screen (Ubuntu 12.04). I can enter and log in via the command line. The guest account works find. I think this happened because I edited some Xorg related file trying to make an external monitor work with my laptop. I copy pasted from a forum post so I dont recall the file or what i put in the file. Can't find the forum post again and my bash history wasn't recorded from that session. I tried reinstalling Xorg and ubuntu-desktop, nvidia, resetting any configs I could find... I'm really at a loss of what to do. Here's my /.xsession-errors: /usr/sbin/lightdm-session: 11: /home/seth/.profile: -s: not found Backend : gconf Integration : true Profile : unity Adding plugins Initializing core options...done Initializing composite options...done Initializing opengl options...done Initializing decor options...done Initializing vpswitch options...done Initializing snap options...done Initializing mousepoll options...done Initializing resize options...done Initializing place options...done Initializing move options...done Initializing wall options...done Initializing grid options...done I/O warning : failed to load external entity "/home/seth/.compiz/session/108fa6ea48f8a973b9133850948930576700000017740033" Initializing session options...done Initializing gnomecompat options...done ** Message: applet now removed from the notification area Initializing animation options...done Initializing fade options...done Initializing unitymtgrabhandles options...done Initializing workarounds options...done Initializing scale options...done compiz (expo) - Warn: failed to bind image to texture Initializing expo options...done Initializing ezoom options...done ** Message: using fallback from indicator to GtkStatusIcon (compiz:1846): GConf-CRITICAL **: gconf_client_add_dir: assertion `gconf_valid_key (dirname, NULL)' failed Initializing unityshell options...done Nautilus-Share-Message: Called "net usershare info" but it failed: 'net usershare' returned error 255: net usershare: cannot open usershare directory /var/lib/samba/usershares. Error No such file or directory Please ask your system administrator to enable user sharing. Setting Update "main_menu_key" Setting Update "run_key" Setting Update "launcher_hide_mode" Setting Update "edge_responsiveness" Setting Update "launcher_capture_mouse" ** Message: moving back from GtkStatusIcon to indicator compiz (decor) - Warn: failed to bind pixmap to texture ** (zeitgeist-datahub:2128): WARNING **: zeitgeist-datahub.vala:227: Unable to get name "org.gnome.zeitgeist.datahub" on the bus! failed to create drawable compiz (core) - Warn: glXCreatePixmap failed compiz (core) - Warn: Couldn't bind background pixmap 0x1e00001 to texture compiz (decor) - Warn: failed to bind pixmap to texture ** Message: No keyring secrets found for Sonic.net_356/802-11-wireless-security; asking user. compiz (decor) - Warn: failed to bind pixmap to texture compiz (decor) - Warn: failed to bind pixmap to texture ** Message: No keyring secrets found for Sonic.net_356/802-11-wireless-security; asking user. ** Message: No keyring secrets found for Sonic.net_356/802-11-wireless-security; asking user. ** Message: No keyring secrets found for Sonic.net_356/802-11-wireless-security; asking user. ** Message: No keyring secrets found for Sonic.net_356/802-11-wireless-security; asking user. ** Message: No keyring secrets found for Sonic.net_356/802-11-wireless-security; asking user. ** Message: No keyring secrets found for Sonic.net_356/802-11-wireless-security; asking user. ** Message: No keyring secrets found for Sonic.net_356/802-11-wireless-security; asking user. ** Message: No keyring secrets found for Sonic.net_356/802-11-wireless-security; asking user. ** Message: No keyring secrets found for Sonic.net_356/802-11-wireless-security; asking user. ** Message: No keyring secrets found for Sonic.net_356/802-11-wireless-security; asking user. ** Message: No keyring secrets found for Sonic.net_356/802-11-wireless-security; asking user. ** Message: No keyring secrets found for Sonic.net_356/802-11-wireless-security; asking user. [2348:2352:12678840568:ERROR:gpu_watchdog_thread.cc(231)] The GPU process hung. Terminating after 10000 ms. [2256:2283:14450711755:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:14450726175:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:14450746028:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:14464521342:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:14464541249:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:14690775186:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:14690795231:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:14704543843:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:14704566717:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:14766138587:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:14857232694:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:14930901403:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:14930965542:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:14944566814:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:14944592215:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:15170929788:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:15170947382:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:15184585015:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:15184605475:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:15366189036:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:15410983381:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:15411569689:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:15431632431:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:15431674438:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:15457304356:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:15656020938:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:15656042383:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:15674651268:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:15674671786:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:16052544301:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:16057387653:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:16157122849:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:16157123851:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:16157125473:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:16157126544:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 [2256:2283:16157129682:ERROR:ssl_client_socket_nss.cc(1542)] handshake with server mail.google.com:443 failed; NSS error code -5938, net_error -107 If anyone can help me out, I'd be forever grateful

  Read the article

• Machine Check Exception

  - by Karl Entwistle

  When trying to install ubuntu-12.04-desktop-amd64.iso from USB I get one of the following errors http://en.wikipedia.org/wiki/Machine_Check_Exception states the error can occur due to -poorly fitted heatsink/computer fans (the same problem can happen with excessive dust in the CPU fan) -an overloaded internal or external power supply (fixable by upgrading) So I tried the following -Using rubbing alcohol to remove all the thermal paste from the CPU and heatsink, I then reseated the CPU after checking all the pins on the MOBO, everything seems fine. -Boot without the GPU to see if was the PSU that is being over stressed. -Removing all RAM apart from one stick and running a Memtest86 which it passed -Using Ubuntu 10.04.4 Desktop 64 bit (Different USB slots and USB sticks) -Using Ubuntu 12.04 Desktop 64 bit (Different USB slots and USB sticks) -Reset the BIOS using the Clear CMOS jumper -Removing all HD power cables and SATA cables -Updating the BIOS from F2 to F6 My PC is using the following parts. -Gigabyte GA-Z77-DS3H (F6 BIOS) -Intel Core i7 3770K 3.5GHz Socket 1155 -G-Skill 8GB (2x4GB) DDR3 1600Mhz RipjawsX Memory Kit CL9 (9-9-9-24) 1.5V -Be Quiet Shadow Rock Pro -Be Quiet Pure Power 730W Modular PSU -Sapphire HD 6870 1GB GDDR5 DVI HDMI DisplayPort PCI-E Graphics Card Any ideas?

  Read the article

• Demote 2003 DC from within Directory Services Restore Mode

  - by adam

  We've had a child DC fail on us, and can't get into Windows on it as Directory Services is failing. A restore of the backed-up active directory hasn't worked due to a corruption, and so we've decided to demote the child DC and - for now - run AD from the PDC only. However, dcpromo /demote doesn't work from Safe Mode or Directory Services Restore Mode. We don't want to do a complete reinstall, as we have Exchange running on the child DC. Anyone know how (if?) we can demote the DC within safe mode or otherwise get into windows? Thanks

  Read the article

• teamviewer in "client only" mode

  - by Tommy

  I have a remote PC with the teamviewer on it. I want to use my local teamviewer installation only for connecting to that remote PC, and I don't want any services (teamviewerd) running on my local Ubuntu 14.04. I've tried to disable the service by doing sudo teamviewer --daemon disable but after that I'm not able to connect to the remote PC, because teamviewer reports an error "The Teamviewer daemon is not running!" on start, and I'm not able to access the gui. Is there a way to connect to the remote PC with teamviewer with no teamviewerd running?

  Read the article

• ntpd server always in 'INIT' mode

  - by Deepak

  I'm running ntpd server in my ubuntu (10.04) machine. But it is always stays in the 'INIT' state as shown below. lyra@ws07475:~$ ntpq -p remote refid st t when poll reach delay offset jitter ============================================================================== europium.canoni .INIT. 16 u - 1024 0 0.000 0.000 0.000 lyra@ws07475:~$ Of course, this means that it is not keeping time. How can I start 'ntpd' server properly ? Please help.

  Read the article

• Using portable Mode for true crypt for crypting Portable HDD , USB etc

  - by Gaurav_Java

  I was wondering how to encrypt my external HDD so that my data would be safe AND accessible from any OS platform (Windows and Linux). So I went through many posts and forums and found out the best thing was to use true crypt. I went along with this post and encrypt my USB drive. When inserted that, Windows didn't recognize it. Then I followed another post that said to install truecrypt. The thing is : How can i use traveler disk setup in Ubuntu (Option not found)? Install truecrypt in USB so that i can *mount my USB or HDD on any other OS? If there is no solution for the upper two, then is there any other software which I can use to encrypt an USB device so that it can be accessed from any OS?

  Read the article

• Dual mode 802.11n PCI adapters

  - by Mike Thompson

  I have recently bought a DLink DIR-825 router. It is a dual mode (2.4GZ & 5GHZ) 802.11n wireless access point/router. What is a good PCI adapter to pair with it? DLink appear to only make one dual mode adapter, which is the DWA-160 USB adapter. They don't seem to have a PCI adapter in their range, which seems very strange. Do any of the other network manufacturers make a good dual mode adapter?

  Read the article

• ath9k driver does not weak up

  - by shantanu

  I know this is common question but i found no suitable answer, so i am asking this again. I installed ubuntu 11.10. I found the bug for ath9k, so set first network boot from BIOS menu. That's worked. I have upgraded to 12.04 yesterday. Now ath9k is creating problem again. First network boot is still enable. ath9k works at start. But failed(connect again and again) after couple of minutes. dmesg show error that it can not weak up in 500us. So i tried #compat-wireless-3.5.1-1. But result is same. I have also added #nohwcrypt=1 option in /etc/modeprob.d/ath9k.conf. Still no luck. I tried #rmmod and then modprobe sudo modprobe ath9k nohwcrypt=1 dmesg shows me error: [ 400.690086] ath9k: Driver unloaded [ 406.214329] ath9k 0000:06:00.0: enabling device (0000 -> 0002) [ 406.214348] ath9k 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 406.214368] ath9k 0000:06:00.0: setting latency timer to 64 [ 406.428517] ath9k 0000:06:00.0: Failed to initialize device [ 406.428852] ath9k 0000:06:00.0: PCI INT A disabled [ 406.428887] ath9k: probe of 0000:06:00.0 failed with error -5 dmesg error when driver fail: 355.023521] ath: Chip reset failed [ 355.023524] ath: Unable to reset channel, reset status -22 [ 355.023556] ath: Unable to set channel [ 355.088569] ath: Failed to stop TX DMA, queues=0x10f! [ 355.122708] ath: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff [ 355.122714] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up [ 355.263962] ath: Chip reset failed [ 355.263966] ath: Unable to reset channel (2437 MHz), reset status -22 [ 358.996063] ath: Failed to wakeup in 500us [ 364.004182] ath: Failed to wakeup in 500us I can not install fresh ubuntu because i have lots of application installed. System : Acer Aspire 4250 AMD dual core 1.6GHZ Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01) EDITED Now i am in serious problem. No wifi device is not showing in ifconfig or lshw commands. Only ether-net interface shows. I tried (FN + WIFI) several times to enable the device but nothing helps. Now I have installed fresh ubuntu 12.04. Please help lshw -c network: *-network description: Ethernet interface product: 82566DC Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 02 serial: 00:19:d1:7a:8e:f9 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.0.0-k duplex=full firmware=1.1-0 ip=192.168.1.114 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:45 memory:90300000-9031ffff memory:90324000-90324fff ioport:20c0(size=32) rfkill command does not show anything but no error.

  Read the article

• Script to setup Ubuntu as a wireless access point on a bridge mode

  - by nixnotwin

  I use the following script to make my netbook a full-fledged wireless access point. It creates a bridge with eth0 and wlan0 and starts hostapd. #!/bin/bash service network-manager stop ifconfig eth0 0.0.0.0 #remove IP from eth0 ifconfig eth0 up #ensure the interface is up ifconfig wlan0 0.0.0.0 #remove IP from eth1 ifconfig wlan0 up #ensure the interface is up brctl addbr br0 #create br0 node hostapd -d /etc/hostapd/hostapd.conf > /var/log/hostapd.log & sleep 5 brctl addif br0 eth0 #add eth0 to bridge br0 brctl addif br0 wlan0 #add wlan0 to bridge br0 ifconfig br0 192.168.1.15 netmask 255.255.255.0 #ip for bridge ifconfig br0 up #bring up interface route add default gw 192.168.1.1 # gateway This script works efficiently. But if I want to revert back to use Network Manager, I cannot do it. The bridge simply cannot be deleted. How can I modify this script so that if I run bridge_script --stop, the bridge gets deleted, network manager starts and interfaces behave as if the machine had a fresh reboot.

  Read the article

• How do you fix "failed command: IDENTIFY DEVICE" showing up in dmesg?

  - by Neil

  I just got a new Mushkin 60gb SSD, and it's now my primary drive in the ata1 spot. I've been getting these failed command: IDENTIFY DEVICE errors which are preventing rebooting and shutdown. Does anyone know what these could be caused by, or how to start troubleshooting? I've tried these kernels: 2.6.32-22-generic 2.6.31-17-generic And they both have the same error. Here is a link to my entire dmesg. And the relevant ata1.00 parts below: [ 59.804237] ata1: drained 256 bytes to clear DRQ. [ 59.804244] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 59.804249] ata1.00: failed command: IDENTIFY DEVICE [ 59.804254] ata1.00: cmd ec/00:00:00:00:00/00:00:00:00:00/40 tag 0 pio 512 in [ 59.804256] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 59.804258] ata1.00: status: { DRDY } [ 59.804264] ata1: hard resetting link [ 59.804266] ata1: nv: skipping hardreset on occupied port [ 60.272036] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 60.352193] ata1.00: configured for UDMA/133 [ 60.352204] ata1: EH complete

  Read the article

• Google Earth freezes during zoom-in on Intel processors with integrated graphics

  - by zigma80

  When I zoom in at a certain zoom level, Google Earth makes my system freeze completely so that I have to power off or reboot I use Kubuntu 12.04 and my laptop has an Intel(R)Core(TM)i3-2310M CPU @2.10GHz with HD3000 graphics. I installed intel-gpu-tools and tried to fix it with sudo intel_reg_write 0x2120 0x1206800 as explained [here][1], but that didn't work. I wonder if there any other solution out there...

  Read the article

• Which logs will tell me about the Touchpad and Keyboard locking up?

  - by Sepero

  I have an Asus N53SM laptop that I leave running for several weeks at a time. I never put it in hibernate or suspend, I only close the lid when I'm not using it. After a few days or weeks of running, the touchpad and keyboard will Both lock up (at the same time) for no apparent reason. I could be just surfing the internet when it happens. The touchpad and keyboard seem to only lock up when I'm actively using the laptop (not when idle), which may mean it's related to something I press, but I'm not sure? The touchpad never locks or unlocks when Pressing FN and the designated touchpad lock key (it does not seem to work on Linux). While the touchpad and keyboard are locked, I am able to plug in my USB mouse and successfully use it to control the screen cursor. I can also remotely get into the system with vnc and ssh, everything seems to run fine there as well. No processes appear out of control. It's just the laptops physical touchpad and keyboard that are locking up. How might I go about diagnosing this problem? What system logs to look at? (anything specific to look for in them?) Perhaps I should try reloading some modules? Any thing else I should inspect?

  Read the article

• Chrome browser full Kiosk mode in Linux (Puppy Linux)

  - by Brandon Ellis

  Let me just say thanks in advance. I am having issues getting google-chrome browser into full KIOSK MODE with no browser bar on a linux platform Looking through the google forums I have found numerous postings on how to get Chrome to show full kiosk mode BUT tried to execute with --kiosk but doesnt seem to get the job done. I dont know if this is platform specific or not, but any useful information would help. I know F11 will display the browser in full kiosk mode, with no browser bar BUT is there a way to do this with a linux script and no need for a monkey pressing F11??

  Read the article

• Why eclipse is hanging while in debug mode ?

  - by Pratik

  We are developing our web application using JAVA GWT framework. We are using Eclipse Indigo as a development GUI. We are facing problems while debugging the JAVA gwt application in eclipse. Most of the time, Eclipse hangs while debugging. We tried to increase the memory buffer size in eclipse but no luck. We had tried to run the eclipse in various environment like Windows, Fedora 16, Cent OS. but some how not getting positive results. Can anyone help me out to decide which OS, and eclipse or version should we have to use so can able to resolve the hanging issue? Thanks in advance. Pratik

  Read the article

• Script to setup ubuntu as a wireless accesspoint on a bridge mode

  - by nixnotwin

  I use the following script to make my netbook a full-fledged wireless accesspoint. It creates a bridge with eth0 and wlan0 and starts hostapd. #!/bin/bash service network-manager stop ifconfig eth0 0.0.0.0 #remove IP from eth0 ifconfig eth0 up #ensure the interface is up ifconfig wlan0 0.0.0.0 #remove IP from eth1 ifconfig wlan0 up #ensure the interface is up brctl addbr br0 #create br0 node hostapd -d /etc/hostapd/hostapd.conf > /var/log/hostapd.log & sleep 5 brctl addif br0 eth0 #add eth0 to bridge br0 brctl addif br0 wlan0 #add wlan0 to bridge br0 ifconfig br0 192.168.1.15 netmask 255.255.255.0 #ip for bridge ifconfig br0 up #bring up interface route add default gw 192.168.1.1 # gateway This script works efficiently. But if I want to revert back to use Network Manager, I cannot do it. The bridge simply cannot be deleted. How can I modify this script so that if I run bridge_script --stop, the bridge gets deleted, network manager starts and interfaces behave as if the machine had a fresh reboot.

  Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >