nat papovich - Page 50 - Developer IT

Shrinking TCP Window Size to 0 on Cisco ASA

- by Brent

Having an issue with any large file transfer that crosses our Cisco ASA unit come to an eventual pause. Setup Test1: Server A, FileZilla Client <- 1GBPS - Cisco ASA <- 1 GBPS - Server B, FileZilla Server TCP Window size on large transfers will drop to 0 after around 30 seconds of a large file transfer. RDP session then becomes unresponsive for a minute or two and then is sporadic. After a minute or two, the FTP transfer resumes, but at 1-2 MB/s. When the FTP transfer is over, the responsiveness of the RDP session returns to normal. Test2: Server C in same network as Server B, FileZilla Client <- local network - Server B, FileZilla Server File will transfer at 30+ MB/s. Details ASA: 5520 running 8.3(1) with ASDM 6.3(1) Windows: Server 2003 R2 SP2 with latest patches Server: VMs running on HP C3000 blade chasis FileZilla: 3.3.5.1, latest stable build Transfer: 20 GB SQL .BAK file Protocol: Active FTP over tcp/20, tcp/21 Switches: Cisco Small Business 2048 Gigabit running latest 2.0.0.8 VMware: 4.1 HP: Flex-10 3.15, latest version Notes All servers are VMs. Thoughts Pretty sure the ASA is at fault since a transfer between VMs on the same network will not show a shrinking Window size. Our ASA is pretty vanilla. No major changes made to any of the settings. It has a bunch of NAT and ACLs. Wireshark Sample No. Time Source Destination Protocol Info 234905 73.916986 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131981791 Win=65535 Len=0 234906 73.917220 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234907 73.917224 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234908 73.917231 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131984551 Win=64155 Len=0 234909 73.917463 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234910 73.917467 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234911 73.917469 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234912 73.917476 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131988691 Win=60015 Len=0 234913 73.917706 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234914 73.917710 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234915 73.917715 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131991451 Win=57255 Len=0 234916 73.917949 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234917 73.917953 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234918 73.917958 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131994211 Win=54495 Len=0 234919 73.918193 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234920 73.918197 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234921 73.918202 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131996971 Win=51735 Len=0 234922 73.918435 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234923 73.918440 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234924 73.918445 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131999731 Win=48975 Len=0 234925 73.918679 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234926 73.918684 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234927 73.918689 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132002491 Win=46215 Len=0 234928 73.918922 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234929 73.918927 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234930 73.918932 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132005251 Win=43455 Len=0 234931 73.919165 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234932 73.919169 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234933 73.919174 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132008011 Win=40695 Len=0 234934 73.919408 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234935 73.919413 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234936 73.919418 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132010771 Win=37935 Len=0 234937 73.919652 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234938 73.919656 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234939 73.919661 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132013531 Win=35175 Len=0 234940 73.919895 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234941 73.919899 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234942 73.919904 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132016291 Win=32415 Len=0 234943 73.920138 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234944 73.920142 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234945 73.920147 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132019051 Win=29655 Len=0 234946 73.920381 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234947 73.920386 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234948 73.920391 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132021811 Win=26895 Len=0 234949 73.920625 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234950 73.920629 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234951 73.920632 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234952 73.920638 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132025951 Win=22755 Len=0 234953 73.920868 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234954 73.920871 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234955 73.920876 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132028711 Win=19995 Len=0 234956 73.921111 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234957 73.921115 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234958 73.921120 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132031471 Win=17235 Len=0 234959 73.921356 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234960 73.921362 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234961 73.921370 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132034231 Win=14475 Len=0 234962 73.921598 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234963 73.921606 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234964 73.921613 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132036991 Win=11715 Len=0 234965 73.921841 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234966 73.921848 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234967 73.921855 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132039751 Win=8955 Len=0 234968 73.922085 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234969 73.922092 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234970 73.922099 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132042511 Win=6195 Len=0 234971 73.922328 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234972 73.922335 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234973 73.922342 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132045271 Win=3435 Len=0 234974 73.922571 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234975 73.922579 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234976 73.922586 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132048031 Win=675 Len=0 234981 75.866453 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 675 bytes 234985 76.020168 1.1.1.1 2.2.2.2 TCP [TCP ZeroWindow] ftp-data ivecon-port [ACK] Seq=1 Ack=132048706 Win=0 Len=0 234989 76.771633 2.2.2.2 1.1.1.1 TCP [TCP ZeroWindowProbe] ivecon-port ftp-data [ACK] Seq=132048706 Ack=1 Win=65535 Len=1 234990 76.771648 1.1.1.1 2.2.2.2 TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] ftp-data ivecon-port [ACK] Seq=1 Ack=132048706 Win=0 Len=0 234997 78.279701 2.2.2.2 1.1.1.1 TCP [TCP ZeroWindowProbe] ivecon-port ftp-data [ACK] Seq=132048706 Ack=1 Win=65535 Len=1 234998 78.279714 1.1.1.1 2.2.2.2 TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] ftp-data ivecon-port [ACK] Seq=1 Ack=132048706 Win=0 Len=0

Read the article

Apache2 mod_proxy to remote Tomcat7 - slow response

- by 12N

Been stuck with this one for a few days. Will try to provide as much information as possible, but please feel free to ask for extra detail. I have 2 VMs behind a NAT, 192.168.0.100 and 192.168.0.102, both running Ubuntu 11.04 x64. The first one is mapped to the exterior and is our webserver, has one Apache/2.2.17 install with several vhosts to serve static content, and there's also mod_jk for load balancing. The second one has a tomcat 7 install with several J2EE REST webservices but no apache - requests are expected to be passed directly from .100 apache to .102 tomcat. It is my intention to prepare a tomcat clustered environment. My problem: Requests reach to 192.168.0.100 with no trouble whatsoever, but then take about... 100 seconds for data to actually arrive to .102 - by that time apache has already timeouted, but tomcat receives and processes the request pretty normally. This happens both when using mod_jk, mod_proxy, or mod_ajp_proxy. No idea why, since there are no firewalls in either of the machines, both are pingable - more than that, there are NFS shares active working like a charm - and a mod_proxy experience shown that requests originating directly from .100 are processed normally. Also, to add insult to injury, a similar environment is set up at our office network. Everything works perfectly. -_- The only difference? We have no ip translation at the office and do everything by internal addresses - dunno if that's relevant in any way. Some configs: Apache vhost: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/ ServerName www.example.com ProxyRequests Off <Proxy *> Options Indexes FollowSymLinks MultiViews AllowOverride all Order allow,deny allow from all </Proxy> ProxyPass /bork http://192.168.0.102:8080/bork ProxyPassReverse /bork http://192.168.0.102:8080/bork LogLevel debug CustomLog ${APACHE_LOG_DIR}/api_access.log combined ErrorLog ${APACHE_LOG_DIR}/api_error.log </VirtualHost> Tomcat connectors <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> <Connector port="8009" enableLookups="false" redirectPort="8443" protocol="AJP/1.3" /> And a debug log from apache, from a test using mod_proxy_ajp. The behavior is pretty much the same in mod_proxy, at least regarding the delay. Please note that tomcat eventually receives and processes the request, more or less when the log starts being updated again: [Sun May 06 14:40:33 2012] [debug] proxy_util.c(1506): [client 188.81.234.2] proxy: ajp: found worker ajp://192.168.0.102:8008/bork for ajp://192.168.0.102:8008/bork/SSOIdentityProviderSoap [Sun May 06 14:40:33 2012] [debug] mod_proxy.c(1015): Running scheme ajp handler (attempt 0) [Sun May 06 14:40:33 2012] [debug] mod_proxy_ajp.c(661): proxy: AJP: serving URL ajp://192.168.0.102:8008/bork/SSOIdentityProviderSoap [Sun May 06 14:40:33 2012] [debug] proxy_util.c(2011): proxy: AJP: has acquired connection for (192.168.0.102) [Sun May 06 14:40:33 2012] [debug] proxy_util.c(2067): proxy: connecting ajp://192.168.0.102:8008/bork/SSOIdentityProviderSoap to 192.168.0.102:8008 [Sun May 06 14:40:33 2012] [debug] proxy_util.c(2193): proxy: connected /bork/SSOIdentityProviderSoap to 192.168.0.102:8008 [Sun May 06 14:40:33 2012] [debug] proxy_util.c(2444): proxy: AJP: fam 2 socket created to connect to 192.168.0.102 [Sun May 06 14:40:33 2012] [debug] ajp_header.c(224): Into ajp_marshal_into_msgb [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[0] [Accept-Encoding] = [gzip,deflate] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[1] [Content-Type] = [text/xml;charset=UTF-8] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[2] [SOAPAction] = [""] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[3] [User-Agent] = [Jakarta Commons-HttpClient/3.1] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[4] [Host] = [www.example.com] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[5] [Content-Length] = [520] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(450): ajp_marshal_into_msgb: Done [Sun May 06 14:40:33 2012] [debug] mod_proxy_ajp.c(267): proxy: APR_BUCKET_IS_EOS [Sun May 06 14:40:33 2012] [debug] mod_proxy_ajp.c(272): proxy: data to read (max 8186 at 4) [Sun May 06 14:40:33 2012] [debug] mod_proxy_ajp.c(287): proxy: got 520 bytes of data [Sun May 06 14:40:33 2012] [debug] ajp_header.c(687): ajp_read_header: ajp_ilink_received 06 [Sun May 06 14:40:33 2012] [debug] ajp_header.c(697): ajp_parse_type: got 06 [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 2 in child 5916 for worker ajp://192.168.0.100:8008/coding [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1837): proxy: worker ajp://192.168.0.100:8008/coding already initialized [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 2 in child 5916 for (192.168.0.100) [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 3 in child 5916 for worker http://192.168.0.102:8080 [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1837): proxy: worker http://192.168.0.102:8080 already initialized [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 3 in child 5916 for (192.168.0.102) [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 4 in child 5916 for worker ajp://192.168.0.102:8008/bork [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1837): proxy: worker ajp://192.168.0.102:8008/bork already initialized [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 4 in child 5916 for (192.168.0.102) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 2 in child 5918 for (192.168.0.100) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 3 in child 5918 for worker http://192.168.0.102:8080 [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1837): proxy: worker http://192.168.0.102:8080 already initialized [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 3 in child 5918 for (192.168.0.102) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 4 in child 5918 for worker ajp://192.168.0.102:8008/bork [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1837): proxy: worker ajp://192.168.0.102:8008/bork already initialized [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 4 in child 5918 for (192.168.0.102) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 2 in child 5917 for worker ajp://192.168.0.100:8008/coding [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1837): proxy: worker ajp://192.168.0.100:8008/coding already initialized [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 2 in child 5917 for (192.168.0.100) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 3 in child 5917 for worker http://192.168.0.102:8080 [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1837): proxy: worker http://192.168.0.102:8080 already initialized [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 3 in child 5917 for (192.168.0.102) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 4 in child 5917 for worker ajp://192.168.0.102:8008/bork [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1837): proxy: worker ajp://192.168.0.102:8008/bork already initialized [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 4 in child 5917 for (192.168.0.102) [Sun May 06 14:42:09 2012] [debug] ajp_header.c(687): ajp_read_header: ajp_ilink_received 04 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(697): ajp_parse_type: got 04 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(516): ajp_unmarshal_response: status = 200 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(537): ajp_unmarshal_response: Number of headers is = 1 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(599): ajp_unmarshal_response: Header[0] [Content-Type] = [text/xml;charset=utf-8] [Sun May 06 14:42:09 2012] [debug] ajp_header.c(609): ajp_unmarshal_response: ap_set_content_type done [Sun May 06 14:42:09 2012] [debug] ajp_header.c(687): ajp_read_header: ajp_ilink_received 03 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(697): ajp_parse_type: got 03 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(687): ajp_read_header: ajp_ilink_received 03 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(697): ajp_parse_type: got 03 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(687): ajp_read_header: ajp_ilink_received 05 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(697): ajp_parse_type: got 05 [Sun May 06 14:42:09 2012] [debug] mod_deflate.c(615): [client 188.81.234.2] Zlib: Compressed 447 to 255 : URL /bork/SSOIdentityProviderSoap [Sun May 06 14:42:09 2012] [debug] mod_proxy_ajp.c(570): proxy: got response from (null) (192.168.0.102) [Sun May 06 14:42:09 2012] [debug] proxy_util.c(2029): proxy: AJP: has released connection for (192.168.0.102) [Sun May 06 14:42:09 2012] [info] [client 188.81.234.2] Request body read timeout Was wondering if any one could provide some advice, perhaps even point out any hideous, horrible configuration error? thanks in advance!

Read the article

Shrinking Windows Size to 0 on Cisco ASA

- by Brent

Having an issue with any large file transfer that crosses our Cisco ASA unit come to an eventual pause. Setup Test1: Server A, FileZilla Client <- 1GBPS - Cisco ASA <- 1 GBPS - Server B, FileZilla Server TCP Window size on large transfers will drop to 0 after around 30 seconds of a large file transfer. RDP session then becomes unresponsive for a minute or two and then is sporadic. After a minute or two, the FTP transfer resumes, but at 1-2 MB/s. When the FTP transfer is over, the responsiveness of the RDP session returns to normal. Test2: Server C in same network as Server B, FileZilla Client <- local network - Server B, FileZilla Server File will transfer at 30+ MB/s. Details ASA: 5520 running 8.3(1) with ASDM 6.3(1) Windows: Server 2003 R2 SP2 with latest patches Server: VMs running on HP C3000 blade chasis FileZilla: 3.3.5.1, latest stable build Transfer: 20 GB SQL .BAK file Protocol: Active FTP over tcp/20, tcp/21 Switches: Cisco Small Business 2048 Gigabit running latest 2.0.0.8 VMware: 4.1 HP: Flex-10 3.15, latest version Notes All servers are VMs. Thoughts Pretty sure the ASA is at fault since a transfer between VMs on the same network will not show a shrinking Window size. Our ASA is pretty vanilla. No major changes made to any of the settings. It has a bunch of NAT and ACLs. Wireshark Sample No. Time Source Destination Protocol Info 234905 73.916986 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131981791 Win=65535 Len=0 234906 73.917220 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234907 73.917224 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234908 73.917231 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131984551 Win=64155 Len=0 234909 73.917463 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234910 73.917467 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234911 73.917469 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234912 73.917476 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131988691 Win=60015 Len=0 234913 73.917706 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234914 73.917710 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234915 73.917715 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131991451 Win=57255 Len=0 234916 73.917949 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234917 73.917953 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234918 73.917958 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131994211 Win=54495 Len=0 234919 73.918193 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234920 73.918197 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234921 73.918202 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131996971 Win=51735 Len=0 234922 73.918435 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234923 73.918440 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234924 73.918445 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=131999731 Win=48975 Len=0 234925 73.918679 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234926 73.918684 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234927 73.918689 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132002491 Win=46215 Len=0 234928 73.918922 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234929 73.918927 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234930 73.918932 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132005251 Win=43455 Len=0 234931 73.919165 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234932 73.919169 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234933 73.919174 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132008011 Win=40695 Len=0 234934 73.919408 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234935 73.919413 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234936 73.919418 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132010771 Win=37935 Len=0 234937 73.919652 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234938 73.919656 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234939 73.919661 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132013531 Win=35175 Len=0 234940 73.919895 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234941 73.919899 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234942 73.919904 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132016291 Win=32415 Len=0 234943 73.920138 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234944 73.920142 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234945 73.920147 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132019051 Win=29655 Len=0 234946 73.920381 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234947 73.920386 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234948 73.920391 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132021811 Win=26895 Len=0 234949 73.920625 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234950 73.920629 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234951 73.920632 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234952 73.920638 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132025951 Win=22755 Len=0 234953 73.920868 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234954 73.920871 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234955 73.920876 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132028711 Win=19995 Len=0 234956 73.921111 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234957 73.921115 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234958 73.921120 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132031471 Win=17235 Len=0 234959 73.921356 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234960 73.921362 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234961 73.921370 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132034231 Win=14475 Len=0 234962 73.921598 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234963 73.921606 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234964 73.921613 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132036991 Win=11715 Len=0 234965 73.921841 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234966 73.921848 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234967 73.921855 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132039751 Win=8955 Len=0 234968 73.922085 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234969 73.922092 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234970 73.922099 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132042511 Win=6195 Len=0 234971 73.922328 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234972 73.922335 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234973 73.922342 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132045271 Win=3435 Len=0 234974 73.922571 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234975 73.922579 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 1380 bytes 234976 73.922586 1.1.1.1 2.2.2.2 TCP ftp-data ivecon-port [ACK] Seq=1 Ack=132048031 Win=675 Len=0 234981 75.866453 2.2.2.2 1.1.1.1 FTP-DATA FTP Data: 675 bytes 234985 76.020168 1.1.1.1 2.2.2.2 TCP [TCP ZeroWindow] ftp-data ivecon-port [ACK] Seq=1 Ack=132048706 Win=0 Len=0 234989 76.771633 2.2.2.2 1.1.1.1 TCP [TCP ZeroWindowProbe] ivecon-port ftp-data [ACK] Seq=132048706 Ack=1 Win=65535 Len=1 234990 76.771648 1.1.1.1 2.2.2.2 TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] ftp-data ivecon-port [ACK] Seq=1 Ack=132048706 Win=0 Len=0 234997 78.279701 2.2.2.2 1.1.1.1 TCP [TCP ZeroWindowProbe] ivecon-port ftp-data [ACK] Seq=132048706 Ack=1 Win=65535 Len=1 234998 78.279714 1.1.1.1 2.2.2.2 TCP [TCP ZeroWindowProbeAck] [TCP ZeroWindow] ftp-data ivecon-port [ACK] Seq=1 Ack=132048706 Win=0 Len=0

Read the article

Weird UPD packets on incoming FTP MLSD command

- by FractalizeR

Hello. I am developing a firewall script for my server. So far it is working fine, except for FTP. Server is dedicated, CentOS based with static IP. There is no NAT between me and server. IPTables is a firewall. Here is a script I use to configure iptables: http://pastebin.com/f54a70fec I allow all RELATED and ESTABLISHED connections in it and load all conn_track modules. I supposed it to be sufficient in order FTP to work with iptables. The problem is that FTP is not working either in passive or active mode. FileZilla and TotalCommander just hangs on MLSD FTP command. In the server log at the exact moment of FTP connection some weird packets are dropped by firewall: Dec 20 15:37:09 server ntpd[12329]: synchronized to 81.200.8.213, stratum 5 Dec 20 15:37:14 server proftpd[30526]: gsmforum.ru (::ffff:95.24.7.25[::ffff:95.24.7.25]) - FTP session opened. Dec 20 12:37:14 server proftpd[30526]: gsmforum.ru (::ffff:95.24.7.25[::ffff:95.24.7.25]) - Preparing to chroot to directory '/home/gsmforum' Dec 20 15:37:23 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:1a:64:6b:1d:67:08:00 SRC=0.0.0.0 DST=255.255.255.255 LEN=306 TOS=0x00 PREC=0x00 TTL=128 ID=32566 DF PROTO=UDP SPT=68 DPT=67 LEN=286 Dec 20 15:37:25 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:1f:29:63:03:de:08:00 SRC=89.111.189.17 DST=255.255.255.255 LEN=68 TOS=0x00 PREC=0x00 TTL=128 ID=13480 PROTO=UDP SPT=1052 DPT=1947 LEN=48 Dec 20 15:37:26 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=61798 PROTO=TCP SPT=4178 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:26 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:1a:64:9c:50:e7:08:00 SRC=0.0.0.0 DST=255.255.255.255 LEN=306 TOS=0x00 PREC=0x00 TTL=128 ID=50015 DF PROTO=UDP SPT=68 DPT=67 LEN=286 Dec 20 15:37:26 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=62305 PROTO=TCP SPT=4178 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:26 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:19:bb:eb:c6:e1:08:00 SRC=0.0.0.0 DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=30 ID=5245 PROTO=UDP SPT=68 DPT=67 LEN=308 Dec 20 15:37:27 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=63285 PROTO=TCP SPT=4178 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:29 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=391 PROTO=TCP SPT=4183 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:29 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=707 PROTO=TCP SPT=4178 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:30 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=975 PROTO=TCP SPT=4183 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:30 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:15:17:10:c5:9b:08:00 SRC=0.0.0.0 DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=30 ID=28799 PROTO=UDP SPT=68 DPT=67 LEN=308 Dec 20 15:37:30 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=2020 PROTO=TCP SPT=4187 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:31 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=2383 PROTO=TCP SPT=4183 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:31 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=2533 PROTO=TCP SPT=4187 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:32 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=3271 PROTO=TCP SPT=4190 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:32 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=77.35.184.49 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=115 ID=14501 DF PROTO=TCP SPT=1355 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:32 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=3700 PROTO=TCP SPT=4187 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:32 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=3769 PROTO=TCP SPT=4196 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:32 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=4034 PROTO=TCP SPT=4190 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:33 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=4522 PROTO=TCP SPT=4196 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Dec 20 15:37:33 server kernel: {fw}UNKNOWN:IN=eth0 OUT= MAC=00:15:17:62:db:28:00:1f:26:27:34:c2:08:00 SRC=81.169.231.108 DST=79.174.68.223 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=4657 PROTO=TCP SPT=4183 DPT=80 WINDOW=65535 RES=0x00 ACK FIN URGP=0 Can you please suggest what is the problem? Everything is working fine except for this damn FTP.

Read the article

How to use sudo with WinSCP and ProFTPd?

- by Gaia

I need to run the SFTP fileserver binary as root, but direct root login is not allowed. In WinSCP, if I use "default" on SFTP server protocol option everything works as expected. Following the instructions to sudo in WinSCP, I tried using "sudo /usr/sbin/proftpd" (works on the command line without any prompts) but it brings up "Cannot initialize SFTP protocol. Is the host running a SFTP server?" How to use sudo with WinSCP and ProFTPd? WinSCP 4.3.7 GUI Protocol: SFTP-3 CentOS 6.2 Webmin/Virtualmin (Current Version) PS: only cert based login is allowed . 2012-06-17 11:05:56.998 -------------------------------------------------------------------------- . 2012-06-17 11:05:56.998 WinSCP Version 4.3.7 (Build 1679) (OS 6.1.7601 Service Pack 1) . 2012-06-17 11:05:56.998 Configuration: HKEY_CURRENT_USER\Software\Martin Prikryl\WinSCP 2\ . 2012-06-17 11:05:56.999 Login time: Sunday, June 17, 2012 11:05:56 AM . 2012-06-17 11:05:56.999 -------------------------------------------------------------------------- . 2012-06-17 11:05:56.999 Session name: KVM1 (Modified stored session) . 2012-06-17 11:05:57.047 Host name: mykvm.com (Port: 22) . 2012-06-17 11:05:57.048 User name: adminuser (Password: No, Key file: Yes) . 2012-06-17 11:05:57.048 Tunnel: No . 2012-06-17 11:05:57.048 Transfer Protocol: SFTP (SCP) . 2012-06-17 11:05:57.048 Ping type: -, Ping interval: 30 sec; Timeout: 15 sec . 2012-06-17 11:05:57.048 Proxy: none . 2012-06-17 11:05:57.048 SSH protocol version: 2; Compression: Yes . 2012-06-17 11:05:57.048 Bypass authentication: No . 2012-06-17 11:05:57.048 Try agent: Yes; Agent forwarding: No; TIS/CryptoCard: No; KI: Yes; GSSAPI: No . 2012-06-17 11:05:57.048 Ciphers: aes,blowfish,3des,WARN,arcfour,des; Ssh2DES: No . 2012-06-17 11:05:57.048 SSH Bugs: -,-,-,-,-,-,-,-,- . 2012-06-17 11:05:57.048 SFTP Bugs: -,- . 2012-06-17 11:05:57.048 Return code variable: Autodetect; Lookup user groups: Yes . 2012-06-17 11:05:57.048 Shell: default . 2012-06-17 11:05:57.048 EOL: 0, UTF: 2 . 2012-06-17 11:05:57.048 Clear aliases: Yes, Unset nat.vars: Yes, Resolve symlinks: Yes . 2012-06-17 11:05:57.048 LS: ls -la, Ign LS warn: Yes, Scp1 Comp: No . 2012-06-17 11:05:57.048 Local directory: default, Remote directory: home, Update: No, Cache: Yes . 2012-06-17 11:05:57.048 Cache directory changes: Yes, Permanent: Yes . 2012-06-17 11:05:57.048 DST mode: 1 . 2012-06-17 11:05:57.048 -------------------------------------------------------------------------- . 2012-06-17 11:05:57.113 Looking up host "mykvm.com" . 2012-06-17 11:05:57.132 Connecting to xxx.xxx.128.59 port 22 . 2012-06-17 11:05:57.499 Server version: SSH-2.0-OpenSSH_5.3 . 2012-06-17 11:05:57.499 Using SSH protocol version 2 . 2012-06-17 11:05:57.499 We claim version: SSH-2.0-WinSCP_release_4.3.7 . 2012-06-17 11:05:57.679 Server supports delayed compression; will try this later . 2012-06-17 11:05:57.679 Doing Diffie-Hellman group exchange . 2012-06-17 11:05:58.077 Doing Diffie-Hellman key exchange with hash SHA-1 . 2012-06-17 11:05:58.498 Host key fingerprint is: . 2012-06-17 11:05:58.498 ssh-rsa 2048 bd:e4:34:b1:d4:69:d6:4e:e4:26:04:8b:b7:b3:de:c3 . 2012-06-17 11:05:58.498 Initialised AES-256 SDCTR client->server encryption . 2012-06-17 11:05:58.498 Initialised HMAC-SHA1 client->server MAC algorithm . 2012-06-17 11:05:58.498 Initialised AES-256 SDCTR server->client encryption . 2012-06-17 11:05:58.498 Initialised HMAC-SHA1 server->client MAC algorithm . 2012-06-17 11:05:58.922 Reading private key file "D:\id_rsa.ppk" ! 2012-06-17 11:05:58.924 Using username "adminuser". . 2012-06-17 11:05:59.550 Offered public key . 2012-06-17 11:05:59.743 Offer of public key accepted ! 2012-06-17 11:05:59.743 Authenticating with public key "masterkey for admin" . 2012-06-17 11:05:59.764 Prompt (3, SSH key passphrase, , Passphrase for key "masterkey for admin": ) . 2012-06-17 11:06:02.938 Sent public key signature . 2012-06-17 11:06:03.352 Access granted . 2012-06-17 11:06:03.352 Initiating key re-exchange (enabling delayed compression) . 2012-06-17 11:06:03.765 Doing Diffie-Hellman group exchange . 2012-06-17 11:06:03.955 Doing Diffie-Hellman key exchange with hash SHA-1 . 2012-06-17 11:06:04.410 Initialised AES-256 SDCTR client->server encryption . 2012-06-17 11:06:04.410 Initialised HMAC-SHA1 client->server MAC algorithm . 2012-06-17 11:06:04.410 Initialised zlib (RFC1950) compression . 2012-06-17 11:06:04.410 Initialised AES-256 SDCTR server->client encryption . 2012-06-17 11:06:04.410 Initialised HMAC-SHA1 server->client MAC algorithm . 2012-06-17 11:06:04.410 Initialised zlib (RFC1950) decompression . 2012-06-17 11:06:04.839 Opened channel for session . 2012-06-17 11:06:05.247 Started a shell/command . 2012-06-17 11:06:05.253 -------------------------------------------------------------------------- . 2012-06-17 11:06:05.253 Using SFTP protocol. . 2012-06-17 11:06:05.253 Doing startup conversation with host. > 2012-06-17 11:06:05.259 Type: SSH_FXP_INIT, Size: 5, Number: -1 . 2012-06-17 11:06:05.354 Server sent command exit status 0 . 2012-06-17 11:06:05.354 Disconnected: All channels closed * 2012-06-17 11:06:05.380 (ESshFatal) Connection has been unexpectedly closed. Server sent command exit status 0. * 2012-06-17 11:06:05.380 Cannot initialize SFTP protocol. Is the host running a SFTP server?

Read the article

Why do ICMP Redirct Host happen?

- by El Barto

I'm setting up a Debian box as a router for 4 subnets. For that I have defined 4 virtual interfaces on the NIC where the LAN is connected (eth1). eth1 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.1.1 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::960c:6dff:fe82:d98/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6026521 errors:0 dropped:0 overruns:0 frame:0 TX packets:35331299 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:673201397 (642.0 MiB) TX bytes:177276932 (169.0 MiB) Interrupt:19 Base address:0x6000 eth1:0 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.2.1 Bcast:10.1.2.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:19 Base address:0x6000 eth1:1 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.3.1 Bcast:10.1.3.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:19 Base address:0x6000 eth1:2 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.4.1 Bcast:10.1.4.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:19 Base address:0x6000 eth2 Link encap:Ethernet HWaddr 6c:f0:49:a4:47:38 inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6ef0:49ff:fea4:4738/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:199809345 errors:0 dropped:0 overruns:0 frame:0 TX packets:158362936 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:3656983762 (3.4 GiB) TX bytes:1715848473 (1.5 GiB) Interrupt:27 eth3 Link encap:Ethernet HWaddr 94:0c:6d:82:c8:72 inet addr:192.168.2.5 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::960c:6dff:fe82:c872/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:110814 errors:0 dropped:0 overruns:0 frame:0 TX packets:73386 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:16044901 (15.3 MiB) TX bytes:42125647 (40.1 MiB) Interrupt:20 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:22351 errors:0 dropped:0 overruns:0 frame:0 TX packets:22351 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2625143 (2.5 MiB) TX bytes:2625143 (2.5 MiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:41358924 errors:0 dropped:0 overruns:0 frame:0 TX packets:23116350 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:3065505744 (2.8 GiB) TX bytes:1324358330 (1.2 GiB) I have two other computers connected to this network. One has IP 10.1.1.12 (subnet mask 255.255.255.0) and the other one 10.1.2.20 (subnet mask 255.255.255.0). I want to be able to reach 10.1.1.12 from 10.1.2.20. Since packet forwarding is enabled in the router and the policy of the FORWARD chain is ACCEPT (and there are no other rules), I understand that there should be no problem to ping from 10.1.2.20 to 10.1.1.12 going through the router. However, this is what I get: $ ping -c15 10.1.1.12 PING 10.1.1.12 (10.1.1.12): 56 data bytes Request timeout for icmp_seq 0 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 81d4 0 0000 3f 01 e2b3 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 1 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 899b 0 0000 3f 01 daec 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 2 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 78fe 0 0000 3f 01 eb89 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 3 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 14b8 0 0000 3f 01 4fd0 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 4 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 8ef7 0 0000 3f 01 d590 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 5 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 ec9d 0 0000 3f 01 77ea 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 6 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 70e6 0 0000 3f 01 f3a1 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 7 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 b0d2 0 0000 3f 01 b3b5 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 8 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 f8b4 0 0000 3f 01 6bd3 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 9 Request timeout for icmp_seq 10 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 1c95 0 0000 3f 01 47f3 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 11 Request timeout for icmp_seq 12 Request timeout for icmp_seq 13 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 62bc 0 0000 3f 01 01cc 10.1.2.20 10.1.1.12 Why does this happen? From what I've read the Redirect Host response has something to do with the fact that the two hosts are in the same network and there being a shorter route (or so I understood). They are in fact in the same physical network, but why would there be a better route if they are not on the same subnet (they can't see each other)? What am I missing? Some extra info you might want to see: # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.8.0.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 127.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 lo 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth2 10.1.4.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.1.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.1.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth2 0.0.0.0 192.168.2.1 0.0.0.0 UG 100 0 0 eth3 # iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # iptables -L -n -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- !10.0.0.0/8 10.0.0.0/8 MASQUERADE all -- 10.0.0.0/8 !10.0.0.0/8 Chain OUTPUT (policy ACCEPT) target prot opt source destination

Read the article

How to stop registration attempts on Asterisk

- by Travesty3

The main question: My Asterisk logs are littered with messages like these: [2012-05-29 15:53:49] NOTICE[5578] chan_sip.c: Registration from '<sip:[email protected]>' failed for '37.75.210.177' - No matching peer found [2012-05-29 15:53:50] NOTICE[5578] chan_sip.c: Registration from '<sip:[email protected]>' failed for '37.75.210.177' - No matching peer found [2012-05-29 15:53:55] NOTICE[5578] chan_sip.c: Registration from '<sip:[email protected]>' failed for '37.75.210.177' - No matching peer found [2012-05-29 15:53:55] NOTICE[5578] chan_sip.c: Registration from '<sip:[email protected]>' failed for '37.75.210.177' - No matching peer found [2012-05-29 15:53:57] NOTICE[5578] chan_sip.c: Sending fake auth rejection for device <sip:[email protected]>;tag=cb23fe53 [2012-05-29 15:53:57] NOTICE[5578] chan_sip.c: Sending fake auth rejection for device <sip:[email protected]>;tag=cb23fe53 [2012-05-29 15:54:02] NOTICE[5578] chan_sip.c: Registration from '<sip:[email protected]>' failed for '37.75.210.177' - No matching peer found [2012-05-29 15:54:03] NOTICE[5578] chan_sip.c: Registration from '<sip:[email protected]>' failed for '37.75.210.177' - No matching peer found [2012-05-29 21:20:36] NOTICE[5578] chan_sip.c: Registration from '"55435217"<sip:[email protected]>' failed for '65.218.221.180' - No matching peer found [2012-05-29 21:20:36] NOTICE[5578] chan_sip.c: Registration from '"1731687005"<sip:[email protected]>' failed for '65.218.221.180' - No matching peer found [2012-05-30 01:18:58] NOTICE[5578] chan_sip.c: Sending fake auth rejection for device "unknown" <sip:[email protected]>;tag=dEBcOzUysX [2012-05-30 01:18:58] NOTICE[5578] chan_sip.c: Sending fake auth rejection for device "unknown" <sip:[email protected]>;tag=9zUari4Mve [2012-05-30 01:19:00] NOTICE[5578] chan_sip.c: Sending fake auth rejection for device "unknown" <sip:[email protected]>;tag=sOYgI1ItQn [2012-05-30 01:19:02] NOTICE[5578] chan_sip.c: Sending fake auth rejection for device "unknown" <sip:[email protected]>;tag=2EGLTzZSEi [2012-05-30 01:19:04] NOTICE[5578] chan_sip.c: Sending fake auth rejection for device "unknown" <sip:[email protected]>;tag=j0JfZoPcur [2012-05-30 01:19:06] NOTICE[5578] chan_sip.c: Sending fake auth rejection for device "unknown" <sip:[email protected]>;tag=Ra0DFDKggt [2012-05-30 01:19:08] NOTICE[5578] chan_sip.c: Sending fake auth rejection for device "unknown" <sip:[email protected]>;tag=rR7q7aTHEz [2012-05-30 01:19:10] NOTICE[5578] chan_sip.c: Sending fake auth rejection for device "unknown" <sip:[email protected]>;tag=VHUMtOpIvU [2012-05-30 01:19:12] NOTICE[5578] chan_sip.c: Sending fake auth rejection for device "unknown" <sip:[email protected]>;tag=JxZUzBnPMW I use Asterisk for an automated phone system. The only thing it does is receives incoming calls and executes a Perl script. No outgoing calls, no incoming calls to an actual phone, no phones registered with Asterisk. It seems like there should be an easy way to block all unauthorized registration attempts, but I have struggled with this for a long time. It seems like there should be a more effective way to prevent these attempts from even getting far enough to reach my Asterisk logs. Some setting I could turn on/off that doesn't allow registration attempts at all or something. Is there any way to do this? Also, am I correct in assuming that the "Registration from ..." messages are likely people attempting to get access to my Asterisk server (probably to make calls on my account)? And what's the difference between those messages and the "Sending fake auth rejection ..." messages? Further detail: I know that the "Registration from ..." lines are intruders attempting to get access to my Asterisk server. With Fail2Ban set up, these IPs are banned after 5 attempts (for some reason, one got 6 attempts, but w/e). But I have no idea what the "Sending fake auth rejection ..." messages mean or how to stop these potential intrusion attempts. As far as I can tell, they have never been successful (haven't seen any weird charges on my bills or anything). Here's what I have done: Set up hardware firewall rules as shown below. Here, xx.xx.xx.xx is the IP address of the server, yy.yy.yy.yy is the IP address of our facility, and aa.aa.aa.aa, bb.bb.bb.bb, and cc.cc.cc.cc are the IP addresses that our VoIP provider uses. Theoretically, ports 10000-20000 should only be accessible by those three IPs.+-------+-----------------------------+----------+-----------+--------+-----------------------------+------------------+ | Order | Source Ip | Protocol | Direction | Action | Destination Ip | Destination Port | +-------+-----------------------------+----------+-----------+--------+-----------------------------+------------------+ | 1 | cc.cc.cc.cc/255.255.255.255 | udp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 10000-20000 | | 2 | any | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 80 | | 3 | any | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 2749 | | 4 | any | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 443 | | 5 | any | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 53 | | 6 | any | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 1981 | | 7 | any | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 1991 | | 8 | any | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 2001 | | 9 | yy.yy.yy.yy/255.255.255.255 | udp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 137-138 | | 10 | yy.yy.yy.yy/255.255.255.255 | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 139 | | 11 | yy.yy.yy.yy/255.255.255.255 | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 445 | | 14 | aa.aa.aa.aa/255.255.255.255 | udp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 10000-20000 | | 17 | bb.bb.bb.bb/255.255.255.255 | udp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 10000-20000 | | 18 | any | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 1971 | | 19 | any | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 2739 | | 20 | any | tcp | inbound | permit | xx.xx.xx.xx/255.255.255.255 | 1023-1050 | | 21 | any | all | inbound | deny | any on server | 1-65535 | +-------+-----------------------------+----------+-----------+--------+-----------------------------+------------------+ Set up Fail2Ban. This is sort of working, but it's reactive instead of proactive, and doesn't seem to be blocking everything (like the "Sending fake auth rejection ..." messages). Set up rules in sip.conf to deny all except for my VoIP provider. Here is my sip.conf with almost all commented lines removed (to save space). Notice at the bottom is my attempt to deny all except for my VoIP provider:[general] context=default allowguest=no allowoverlap=no bindport=5060 bindaddr=0.0.0.0 srvlookup=yes disallow=all allow=g726 allow=ulaw allow=alaw allow=g726aal2 allow=adpcm allow=slin allow=lpc10 allow=speex allow=g726 insecure=invite alwaysauthreject=yes ;registertimeout=20 registerattempts=0 register = user:pass:[email protected]:5060/700 [mysipprovider] type=peer username=user fromuser=user secret=pass host=sip.mysipprovider.com fromdomain=sip.mysipprovider.com nat=no ;canreinvite=yes qualify=yes context=inbound-mysipprovider disallow=all allow=ulaw allow=alaw allow=gsm insecure=port,invite deny=0.0.0.0/0.0.0.0 permit=aa.aa.aa.aa/255.255.255.255 permit=bb.bb.bb.bb/255.255.255.255 permit=cc.cc.cc.cc/255.255.255.255

Read the article

Why do ICMP Redirect Host happen?

- by El Barto

I'm setting up a Debian box as a router for 4 subnets. For that I have defined 4 virtual interfaces on the NIC where the LAN is connected (eth1). eth1 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.1.1 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::960c:6dff:fe82:d98/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6026521 errors:0 dropped:0 overruns:0 frame:0 TX packets:35331299 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:673201397 (642.0 MiB) TX bytes:177276932 (169.0 MiB) Interrupt:19 Base address:0x6000 eth1:0 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.2.1 Bcast:10.1.2.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:19 Base address:0x6000 eth1:1 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.3.1 Bcast:10.1.3.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:19 Base address:0x6000 eth1:2 Link encap:Ethernet HWaddr 94:0c:6d:82:0d:98 inet addr:10.1.4.1 Bcast:10.1.4.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:19 Base address:0x6000 eth2 Link encap:Ethernet HWaddr 6c:f0:49:a4:47:38 inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6ef0:49ff:fea4:4738/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:199809345 errors:0 dropped:0 overruns:0 frame:0 TX packets:158362936 errors:0 dropped:0 overruns:0 carrier:1 collisions:0 txqueuelen:1000 RX bytes:3656983762 (3.4 GiB) TX bytes:1715848473 (1.5 GiB) Interrupt:27 eth3 Link encap:Ethernet HWaddr 94:0c:6d:82:c8:72 inet addr:192.168.2.5 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::960c:6dff:fe82:c872/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:110814 errors:0 dropped:0 overruns:0 frame:0 TX packets:73386 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:16044901 (15.3 MiB) TX bytes:42125647 (40.1 MiB) Interrupt:20 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:22351 errors:0 dropped:0 overruns:0 frame:0 TX packets:22351 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2625143 (2.5 MiB) TX bytes:2625143 (2.5 MiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:41358924 errors:0 dropped:0 overruns:0 frame:0 TX packets:23116350 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:3065505744 (2.8 GiB) TX bytes:1324358330 (1.2 GiB) I have two other computers connected to this network. One has IP 10.1.1.12 (subnet mask 255.255.255.0) and the other one 10.1.2.20 (subnet mask 255.255.255.0). I want to be able to reach 10.1.1.12 from 10.1.2.20. Since packet forwarding is enabled in the router and the policy of the FORWARD chain is ACCEPT (and there are no other rules), I understand that there should be no problem to ping from 10.1.2.20 to 10.1.1.12 going through the router. However, this is what I get: $ ping -c15 10.1.1.12 PING 10.1.1.12 (10.1.1.12): 56 data bytes Request timeout for icmp_seq 0 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 81d4 0 0000 3f 01 e2b3 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 1 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 899b 0 0000 3f 01 daec 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 2 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 78fe 0 0000 3f 01 eb89 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 3 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 14b8 0 0000 3f 01 4fd0 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 4 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 8ef7 0 0000 3f 01 d590 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 5 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 ec9d 0 0000 3f 01 77ea 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 6 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 70e6 0 0000 3f 01 f3a1 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 7 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 b0d2 0 0000 3f 01 b3b5 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 8 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 f8b4 0 0000 3f 01 6bd3 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 9 Request timeout for icmp_seq 10 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 1c95 0 0000 3f 01 47f3 10.1.2.20 10.1.1.12 Request timeout for icmp_seq 11 Request timeout for icmp_seq 12 Request timeout for icmp_seq 13 92 bytes from router2.mydomain.com (10.1.2.1): Redirect Host(New addr: 10.1.1.12) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 62bc 0 0000 3f 01 01cc 10.1.2.20 10.1.1.12 Why does this happen? From what I've read the Redirect Host response has something to do with the fact that the two hosts are in the same network and there being a shorter route (or so I understood). They are in fact in the same physical network, but why would there be a better route if they are not on the same subnet (they can't see each other)? What am I missing? Some extra info you might want to see: # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.8.0.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 127.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 lo 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth2 10.1.4.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.1.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 10.1.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth2 0.0.0.0 192.168.2.1 0.0.0.0 UG 100 0 0 eth3 # iptables -L -n Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # iptables -L -n -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- !10.0.0.0/8 10.0.0.0/8 MASQUERADE all -- 10.0.0.0/8 !10.0.0.0/8 Chain OUTPUT (policy ACCEPT) target prot opt source destination

Read the article

TCP RST Reset Every 5 Minutes on Windows 2003 sp2

- by Dan

Hey, Recently I had a web developer come to me and ask why he was receiving connection errors in his app that was accessing a sql database. So, I went through my normal trouble shooting steps to isolate or reproduce the issue. I discovered that if I connected to the database using Query Analyzer and let the connection idle for 5 minutes it would disconnect. Meaning... I would no longer be able to refresh my tables or any other object/node within the object browser in Query Analyzer. I would have to right click on the instance and refresh for it to re-establish the connection. Next I went to wireshark and ran a capture on the client pc's nic card. Sure enough it was receiving a TCP RST reset every 5 min if the connection idled longer than 5 min. I also ran a capture on the SQL Server and noticed the TCP RST reset command as well. Attached below is the capture from the client Machine. If someone could please assist... That would be great. -I checked all settings within SQL Server 2000 against another server and they all seem to be the same. -Issue does not occur if I connect to any other SQL server 2000 server. -Issue does not occur if connecting to SQL on the server itself... so only over the network. -I consulted with network team and this is the response back: There are no firewalls or proxies in between SQL Server and your desktop. The traffic flows like this: Desktop-Access Switch-Distro Switch-Core Switch-Datacenter Switch-SQL Server None of the switches have security ACL’s configured on them. Also they stated that NAT was not turned on. -Issue does not occur with SQL server Enterprise Manager. -Ran SQL Profiler at the same time and did not see anything out of the ordinary during the RST I HAVE SEARCHED HIGH AND LOW ON GOOGLE FOR A RESOLUTION FOR THIS ISSUE. NO LUCK! My questions are: What could be causing this? Wrong Sequence number? setting in a router or switch the network team may have over looked? Setting within Windows? Setting within SQL Server 2000 that I have over looked? Better way to utilize Wireshark to find more answers? RST is about 10 from the bottom. No. Time Source Destination Protocol Info 258 24.390708 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [SYN] Seq=0 Len=0 MSS=1260 259 24.401679 x.x.x.10 x.x.x.99 TCP 2226 > 14488 [SYN, ACK] Seq=0 Ack=1 Win=64240 Len=0 MSS=1460 260 24.401729 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [ACK] Seq=1 Ack=1 Win=65535 [TCP CHECKSUM INCORRECT] Len=0 261 24.402212 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [PSH, ACK] Seq=1 Ack=1 Win=65535 [TCP CHECKSUM INCORRECT] Len=42 262 24.413335 x.x.x.10 x.x.x.99 TCP 2226 > 14488 [PSH, ACK] Seq=1 Ack=43 Win=64198 Len=37 285 24.466512 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [ACK] Seq=43 Ack=38 Win=65498 [TCP CHECKSUM INCORRECT] Len=1260 286 24.466536 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [PSH, ACK] Seq=1303 Ack=38 Win=65498 [TCP CHECKSUM INCORRECT] Len=437 289 24.478168 x.x.x.10 x.x.x.99 TCP 2226 > 14488 [ACK] Seq=38 Ack=1740 Win=64240 Len=0 290 24.480078 x.x.x.10 x.x.x.99 TCP 2226 > 14488 [PSH, ACK] Seq=38 Ack=1740 Win=64240 Len=385 293 24.493629 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [PSH, ACK] Seq=1740 Ack=423 Win=65113 [TCP CHECKSUM INCORRECT] Len=60 294 24.504637 x.x.x.10 x.x.x.99 TCP 2226 > 14488 [PSH, ACK] Seq=423 Ack=1800 Win=64180 Len=17 295 24.533197 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [PSH, ACK] Seq=1800 Ack=440 Win=65096 [TCP CHECKSUM INCORRECT] Len=44 296 24.544098 x.x.x.10 x.x.x.99 TCP 2226 > 14488 [PSH, ACK] Seq=440 Ack=1844 Win=64136 Len=17 297 24.544524 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [PSH, ACK] Seq=1844 Ack=457 Win=65079 [TCP CHECKSUM INCORRECT] Len=58 298 24.558033 x.x.x.10 x.x.x.99 TCP 2226 > 14488 [PSH, ACK] Seq=457 Ack=1902 Win=64078 Len=31 299 24.558493 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [PSH, ACK] Seq=1902 Ack=488 Win=65048 [TCP CHECKSUM INCORRECT] Len=92 300 24.569984 x.x.x.10 x.x.x.99 TCP 2226 > 14488 [PSH, ACK] Seq=488 Ack=1994 Win=63986 Len=70 301 24.577395 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [PSH, ACK] Seq=1994 Ack=558 Win=64978 [TCP CHECKSUM INCORRECT] Len=448 303 24.589834 x.x.x.10 x.x.x.99 TCP 2226 > 14488 [PSH, ACK] Seq=558 Ack=2442 Win=63538 Len=64 304 24.590122 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [FIN, ACK] Seq=2442 Ack=622 Win=64914 [TCP CHECKSUM INCORRECT] Len=0 305 24.601094 x.x.x.10 x.x.x.99 TCP 2226 > 14488 [ACK] Seq=622 Ack=2443 Win=63538 Len=0 306 24.601659 x.x.x.10 x.x.x.99 TCP 2226 > 14488 [FIN, ACK] Seq=622 Ack=2443 Win=63538 Len=0 307 24.601686 x.x.x.99 x.x.x.10 TCP 14488 > 2226 [ACK] Seq=2443 Ack=623 Win=64914 [TCP CHECKSUM INCORRECT] Len=0 321 25.839371 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [SYN] Seq=0 Len=0 MSS=1260 322 25.850291 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [SYN, ACK] Seq=0 Ack=1 Win=64240 Len=0 MSS=1460 323 25.850321 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [ACK] Seq=1 Ack=1 Win=65535 [TCP CHECKSUM INCORRECT] Len=0 324 25.850660 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=1 Ack=1 Win=65535 [TCP CHECKSUM INCORRECT] Len=42 325 25.861573 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=1 Ack=43 Win=64198 Len=37 326 25.863103 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [ACK] Seq=43 Ack=38 Win=65498 [TCP CHECKSUM INCORRECT] Len=1260 327 25.863130 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=1303 Ack=38 Win=65498 [TCP CHECKSUM INCORRECT] Len=463 328 25.874417 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [ACK] Seq=38 Ack=1766 Win=64240 Len=0 329 25.876315 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=38 Ack=1766 Win=64240 Len=385 330 25.876905 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=1766 Ack=423 Win=65113 [TCP CHECKSUM INCORRECT] Len=60 331 25.887773 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=423 Ack=1826 Win=64180 Len=17 332 25.888299 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=1826 Ack=440 Win=65096 [TCP CHECKSUM INCORRECT] Len=44 333 25.899169 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=440 Ack=1870 Win=64136 Len=17 334 25.899574 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=1870 Ack=457 Win=65079 [TCP CHECKSUM INCORRECT] Len=58 335 25.910618 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=457 Ack=1928 Win=64078 Len=31 336 25.911051 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=1928 Ack=488 Win=65048 [TCP CHECKSUM INCORRECT] Len=92 337 25.922068 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=488 Ack=2020 Win=63986 Len=70 338 25.922500 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=2020 Ack=558 Win=64978 [TCP CHECKSUM INCORRECT] Len=34 339 25.933621 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=558 Ack=2054 Win=63952 Len=29 340 25.941165 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=2054 Ack=587 Win=64949 [TCP CHECKSUM INCORRECT] Len=54 341 25.952164 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=587 Ack=2108 Win=63898 Len=17 342 25.952993 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=2108 Ack=604 Win=64932 [TCP CHECKSUM INCORRECT] Len=72 343 25.963889 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=604 Ack=2180 Win=63826 Len=17 344 25.964366 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=2180 Ack=621 Win=64915 [TCP CHECKSUM INCORRECT] Len=52 345 25.975253 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=621 Ack=2232 Win=63774 Len=17 346 25.975590 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=2232 Ack=638 Win=64898 [TCP CHECKSUM INCORRECT] Len=32 347 25.986588 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=638 Ack=2264 Win=63742 Len=167 348 25.987262 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=2264 Ack=805 Win=64731 [TCP CHECKSUM INCORRECT] Len=512 349 25.998464 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=805 Ack=2776 Win=63230 Len=89 350 25.998861 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=2776 Ack=894 Win=64642 [TCP CHECKSUM INCORRECT] Len=46 351 26.009849 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=894 Ack=2822 Win=63184 Len=17 352 26.010175 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=2822 Ack=911 Win=64625 [TCP CHECKSUM INCORRECT] Len=80 353 26.021220 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=911 Ack=2902 Win=63104 Len=33 354 26.022613 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [PSH, ACK] Seq=2902 Ack=944 Win=64592 [TCP CHECKSUM INCORRECT] Len=498 355 26.034018 x.x.x.10 x.x.x.99 TCP 2226 > 14492 [PSH, ACK] Seq=944 Ack=3400 Win=64240 Len=89 356 26.046501 x.x.x.99 x.x.x.10 TCP 14493 > 2226 [SYN] Seq=0 Len=0 MSS=1260 357 26.057323 x.x.x.10 x.x.x.99 TCP 2226 > 14493 [SYN, ACK] Seq=0 Ack=1 Win=64240 Len=0 MSS=1460 358 26.057355 x.x.x.99 x.x.x.10 TCP 14493 > 2226 [ACK] Seq=1 Ack=1 Win=65535 [TCP CHECKSUM INCORRECT] Len=0 359 26.057661 x.x.x.99 x.x.x.10 TCP 14493 > 2226 [PSH, ACK] Seq=1 Ack=1 Win=65535 [TCP CHECKSUM INCORRECT] Len=42 361 26.068606 x.x.x.10 x.x.x.99 TCP 2226 > 14493 [PSH, ACK] Seq=1 Ack=43 Win=64198 Len=37 362 26.070087 x.x.x.99 x.x.x.10 TCP 14493 > 2226 [ACK] Seq=43 Ack=38 Win=65498 [TCP CHECKSUM INCORRECT] Len=1260 363 26.070113 x.x.x.99 x.x.x.10 TCP 14493 > 2226 [PSH, ACK] Seq=1303 Ack=38 Win=65498 [TCP CHECKSUM INCORRECT] Len=485 364 26.081336 x.x.x.10 x.x.x.99 TCP 2226 > 14493 [ACK] Seq=38 Ack=1788 Win=64240 Len=0 365 26.083330 x.x.x.10 x.x.x.99 TCP 2226 > 14493 [PSH, ACK] Seq=38 Ack=1788 Win=64240 Len=385 366 26.083943 x.x.x.99 x.x.x.10 TCP 14493 > 2226 [PSH, ACK] Seq=1788 Ack=423 Win=65113 [TCP CHECKSUM INCORRECT] Len=46 368 26.094921 x.x.x.10 x.x.x.99 TCP 2226 > 14493 [PSH, ACK] Seq=423 Ack=1834 Win=64194 Len=17 369 26.095317 x.x.x.99 x.x.x.10 TCP 14493 > 2226 [PSH, ACK] Seq=1834 Ack=440 Win=65096 [TCP CHECKSUM INCORRECT] Len=48 370 26.107553 x.x.x.10 x.x.x.99 TCP 2226 > 14493 [PSH, ACK] Seq=440 Ack=1882 Win=64146 Len=877 371 26.241285 x.x.x.99 x.x.x.10 TCP 14492 > 2226 [ACK] Seq=3400 Ack=1033 Win=64503 [TCP CHECKSUM INCORRECT] Len=0 372 26.241307 x.x.x.99 x.x.x.10 TCP 14493 > 2226 [ACK] Seq=1882 Ack=1317 Win=65535 [TCP CHECKSUM INCORRECT] Len=0 653 55.913838 x.x.x.99 x.x.x.10 TCP [TCP Keep-Alive] 14492 > 2226 [ACK] Seq=3399 Ack=1033 Win=64503 Len=1 654 55.924547 x.x.x.10 x.x.x.99 TCP [TCP Keep-Alive ACK] 2226 > 14492 [ACK] Seq=1033 Ack=3400 Win=64240 Len=0 910 85.887176 x.x.x.99 x.x.x.10 TCP [TCP Keep-Alive] 14492 > 2226 [ACK] Seq=3399 Ack=1033 Win=64503 Len=1 911 85.898010 x.x.x.10 x.x.x.99 TCP [TCP Keep-Alive ACK] 2226 > 14492 [ACK] Seq=1033 Ack=3400 Win=64240 Len=0 1155 115.859520 x.x.x.99 x.x.x.10 TCP [TCP Keep-Alive] 14492 2226 [ACK] Seq=3399 Ack=1033 Win=64503 Len=1 1156 115.870285 x.x.x.10 x.x.x.99 TCP [TCP Keep-Alive ACK] 2226 14492 [ACK] Seq=1033 Ack=3400 Win=64240 Len=0 1395 145.934403 x.x.x.99 x.x.x.10 TCP [TCP Keep-Alive] 14492 2226 [ACK] Seq=3399 Ack=1033 Win=64503 Len=1 1396 145.945938 x.x.x.10 x.x.x.99 TCP [TCP Keep-Alive ACK] 2226 14492 [ACK] Seq=1033 Ack=3400 Win=64240 Len=0 1649 175.906767 x.x.x.99 x.x.x.10 TCP [TCP Keep-Alive] 14492 2226 [ACK] Seq=3399 Ack=1033 Win=64503 Len=1 1650 175.917741 x.x.x.10 x.x.x.99 TCP [TCP Keep-Alive ACK] 2226 14492 [ACK] Seq=1033 Ack=3400 Win=64240 Len=0 1887 205.881080 x.x.x.99 x.x.x.10 TCP [TCP Keep-Alive] 14492 2226 [ACK] Seq=3399 Ack=1033 Win=64503 Len=1 1888 205.891818 x.x.x.10 x.x.x.99 TCP [TCP Keep-Alive ACK] 2226 14492 [ACK] Seq=1033 Ack=3400 Win=64240 Len=0 2112 235.854408 x.x.x.99 x.x.x.10 TCP [TCP Keep-Alive] 14492 2226 [ACK] Seq=3399 Ack=1033 Win=64503 Len=1 2113 235.865482 x.x.x.10 x.x.x.99 TCP [TCP Keep-Alive ACK] 2226 14492 [ACK] Seq=1033 Ack=3400 Win=64240 Len=0 2398 265.928342 x.x.x.99 x.x.x.10 TCP [TCP Keep-Alive] 14492 2226 [ACK] Seq=3399 Ack=1033 Win=64503 Len=1 2399 265.939242 x.x.x.10 x.x.x.99 TCP [TCP Keep-Alive ACK] 2226 14492 [ACK] Seq=1033 Ack=3400 Win=64240 Len=0 2671 295.900714 x.x.x.99 x.x.x.10 TCP [TCP Keep-Alive] 14492 2226 [ACK] Seq=3399 Ack=1033 Win=64503 Len=1 2672 295.911590 x.x.x.10 x.x.x.99 TCP [TCP Keep-Alive ACK] 2226 14492 [ACK] Seq=1033 Ack=3400 Win=64240 Len=0 2880 315.705029 x.x.x.10 x.x.x.99 TCP 2226 14493 [RST] Seq=1317 Len=0 2973 325.975607 x.x.x.99 x.x.x.10 TCP [TCP Keep-Alive] 14492 2226 [ACK] Seq=3399 Ack=1033 Win=64503 Len=1 2974 325.986337 x.x.x.10 x.x.x.99 TCP [TCP Keep-Alive ACK] 2226 14492 [ACK] Seq=1033 Ack=3400 Win=64240 Len=0 2975 326.154327 x.x.x.10 x.x.x.99 TCP [TCP Keep-Alive] 2226 14492 [ACK] Seq=1032 Ack=3400 Win=64240 Len=1 2976 326.154350 x.x.x.99 x.x.x.10 TCP [TCP Keep-Alive ACK] 14492 2226 [ACK] Seq=3400 Ack=1033 Win=64503 [TCP CHECKSUM INCORRECT] Len=0

Read the article

OpenVPN - Windows 8 to Windows 2008 Server, not connecting

- by niico

I have followed this tutorial about setting up an OpenVPN Server on Windows Server - and a client on Windows (in this case Windows 8). The server appears to be running fine - but it is not connecting with this error: Mon Jul 22 19:09:04 2013 Warning: cannot open --log file: C:\Program Files\OpenVPN\log\my-laptop.log: Access is denied. (errno=5) Mon Jul 22 19:09:04 2013 OpenVPN 2.3.2 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [PKCS11] [eurephia] [IPv6] built on Jun 3 2013 Mon Jul 22 19:09:04 2013 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:25340 Mon Jul 22 19:09:04 2013 Need hold release from management interface, waiting... Mon Jul 22 19:09:05 2013 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:25340 Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'state on' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'log all on' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'hold off' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'hold release' Mon Jul 22 19:09:05 2013 Socket Buffers: R=[65536->65536] S=[65536->65536] Mon Jul 22 19:09:05 2013 UDPv4 link local: [undef] Mon Jul 22 19:09:05 2013 UDPv4 link remote: [AF_INET]66.666.66.666:9999 Mon Jul 22 19:09:05 2013 MANAGEMENT: >STATE:1374494945,WAIT,,, Mon Jul 22 19:10:05 2013 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) Mon Jul 22 19:10:05 2013 TLS Error: TLS handshake failed Mon Jul 22 19:10:05 2013 SIGUSR1[soft,tls-error] received, process restarting Mon Jul 22 19:10:05 2013 MANAGEMENT: >STATE:1374495005,RECONNECTING,tls-error,, Mon Jul 22 19:10:05 2013 Restart pause, 2 second(s) Note I have changed the IP and port no (it uses a non-standard port for security reasons). That port is open on the hardware firewall. The server logs are showing a connection attempt from my client: TLS: Initial packet from [AF_INET]118.68.xx.xx:65011, sid=081af4ed xxxxxxxx Mon Jul 22 14:19:15 2013 118.68.xx.xx:65011 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) How can I problem solve this & find the problem? Thx Update - Client config file: ############################################## # Sample client-side OpenVPN 2.0 config file # # for connecting to multi-client server. # # # # This configuration can be used by multiple # # clients, however each client should have # # its own cert and key files. # # # # On Windows, you might want to rename this # # file so it has a .ovpn extension # ############################################## # Specify that we are a client and that we # will be pulling certain config file directives # from the server. client # Use the same setting as you are using on # the server. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel # if you have more than one. On XP SP2, # you may need to disable the firewall # for the TAP adapter. ;dev-node MyTap # Are we connecting to a TCP or # UDP server? Use the same setting as # on the server. ;proto tcp proto udp # The hostname/IP and port of the server. # You can have multiple remote entries # to load balance between the servers. remote 00.00.00.00 1194 ;remote 00.00.00.00 9999 ;remote my-server-2 1194 # Choose a random host from the remote # list for load-balancing. Otherwise # try hosts in the order specified. ;remote-random # Keep trying indefinitely to resolve the # host name of the OpenVPN server. Very useful # on machines which are not permanently connected # to the internet such as laptops. resolv-retry infinite # Most clients don't need to bind to # a specific local port number. nobind # Downgrade privileges after initialization (non-Windows only) ;user nobody ;group nobody # Try to preserve some state across restarts. persist-key persist-tun # If you are connecting through an # HTTP proxy to reach the actual OpenVPN # server, put the proxy server/IP and # port number here. See the man page # if your proxy server requires # authentication. ;http-proxy-retry # retry on connection failures ;http-proxy [proxy server] [proxy port #] # Wireless networks often produce a lot # of duplicate packets. Set this flag # to silence duplicate packet warnings. ;mute-replay-warnings # SSL/TLS parms. # See the server config file for more # description. It's best to use # a separate .crt/.key file pair # for each client. A single ca # file can be used for all clients. ca "C:\\Program Files\\OpenVPN\\config\\ca.crt" cert "C:\\Program Files\\OpenVPN\\config\\my-laptop.crt" key "C:\\Program Files\\OpenVPN\\config\\my-laptop.key" # Verify server certificate by checking # that the certicate has the nsCertType # field set to "server". This is an # important precaution to protect against # a potential attack discussed here: # http://openvpn.net/howto.html#mitm # # To use this feature, you will need to generate # your server certificates with the nsCertType # field set to "server". The build-key-server # script in the easy-rsa folder will do this. ns-cert-type server # If a tls-auth key is used on the server # then every client must also have the key. ;tls-auth ta.key 1 # Select a cryptographic cipher. # If the cipher option is used on the server # then you must also specify it here. ;cipher x # Enable compression on the VPN link. # Don't enable this unless it is also # enabled in the server config file. comp-lzo # Set log file verbosity. verb 3 # Silence repeating messages ;mute 20 Server config file: ################################################# # Sample OpenVPN 2.0 config file for # # multi-client server. # # # # This file is for the server side # # of a many-clients <-> one-server # # OpenVPN configuration. # # # # OpenVPN also supports # # single-machine <-> single-machine # # configurations (See the Examples page # # on the web site for more info). # # # # This config should work on Windows # # or Linux/BSD systems. Remember on # # Windows to quote pathnames and use # # double backslashes, e.g.: # # "C:\\Program Files\\OpenVPN\\config\\foo.key" # # # # Comments are preceded with '#' or ';' # ################################################# # Which local IP address should OpenVPN # listen on? (optional) ;local 00.00.00.00 # Which TCP/UDP port should OpenVPN listen on? # If you want to run multiple OpenVPN instances # on the same machine, use a different port # number for each one. You will need to # open up this port on your firewall. std 1194 port 1194 # TCP or UDP server? ;proto tcp proto udp # "dev tun" will create a routed IP tunnel, # "dev tap" will create an ethernet tunnel. # Use "dev tap0" if you are ethernet bridging # and have precreated a tap0 virtual interface # and bridged it with your ethernet interface. # If you want to control access policies # over the VPN, you must create firewall # rules for the the TUN/TAP interface. # On non-Windows systems, you can give # an explicit unit number, such as tun0. # On Windows, use "dev-node" for this. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel if you # have more than one. On XP SP2 or higher, # you may need to selectively disable the # Windows firewall for the TAP adapter. # Non-Windows systems usually don't need this. ;dev-node MyTap # SSL/TLS root certificate (ca), certificate # (cert), and private key (key). Each client # and the server must have their own cert and # key file. The server and all clients will # use the same ca file. # # See the "easy-rsa" directory for a series # of scripts for generating RSA certificates # and private keys. Remember to use # a unique Common Name for the server # and each of the client certificates. # # Any X509 key management system can be used. # OpenVPN can also use a PKCS #12 formatted key file # (see "pkcs12" directive in man page). ca "C:\\Program Files\\OpenVPN\\config\\ca.crt" cert "C:\\Program Files\\OpenVPN\\config\\server.crt" key "C:\\Program Files\\OpenVPN\\config\\server.key" # Diffie hellman parameters. # Generate your own with: # openssl dhparam -out dh1024.pem 1024 # Substitute 2048 for 1024 if you are using # 2048 bit keys. dh "C:\\Program Files\\OpenVPN\\config\\dh2048.pem" # Configure server mode and supply a VPN subnet # for OpenVPN to draw client addresses from. # The server will take 10.8.0.1 for itself, # the rest will be made available to clients. # Each client will be able to reach the server # on 10.8.0.1. Comment this line out if you are # ethernet bridging. See the man page for more info. server 10.8.0.0 255.255.255.0 # Maintain a record of client <-> virtual IP address # associations in this file. If OpenVPN goes down or # is restarted, reconnecting clients can be assigned # the same virtual IP address from the pool that was # previously assigned. ifconfig-pool-persist ipp.txt # Configure server mode for ethernet bridging. # You must first use your OS's bridging capability # to bridge the TAP interface with the ethernet # NIC interface. Then you must manually set the # IP/netmask on the bridge interface, here we # assume 10.8.0.4/255.255.255.0. Finally we # must set aside an IP range in this subnet # (start=10.8.0.50 end=10.8.0.100) to allocate # to connecting clients. Leave this line commented # out unless you are ethernet bridging. ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 # Configure server mode for ethernet bridging # using a DHCP-proxy, where clients talk # to the OpenVPN server-side DHCP server # to receive their IP address allocation # and DNS server addresses. You must first use # your OS's bridging capability to bridge the TAP # interface with the ethernet NIC interface. # Note: this mode only works on clients (such as # Windows), where the client-side TAP adapter is # bound to a DHCP client. ;server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. ;push "route 192.168.10.0 255.255.255.0" ;push "route 192.168.20.0 255.255.255.0" # To assign specific IP addresses to specific # clients or if a connecting client has a private # subnet behind it that should also have VPN access, # use the subdirectory "ccd" for client-specific # configuration files (see man page for more info). # EXAMPLE: Suppose the client # having the certificate common name "Thelonious" # also has a small subnet behind his connecting # machine, such as 192.168.40.128/255.255.255.248. # First, uncomment out these lines: ;client-config-dir ccd ;route 192.168.40.128 255.255.255.248 # Then create a file ccd/Thelonious with this line: # iroute 192.168.40.128 255.255.255.248 # This will allow Thelonious' private subnet to # access the VPN. This example will only work # if you are routing, not bridging, i.e. you are # using "dev tun" and "server" directives. # EXAMPLE: Suppose you want to give # Thelonious a fixed VPN IP address of 10.9.0.1. # First uncomment out these lines: ;client-config-dir ccd ;route 10.9.0.0 255.255.255.252 # Then add this line to ccd/Thelonious: # ifconfig-push 10.9.0.1 10.9.0.2 # Suppose that you want to enable different # firewall access policies for different groups # of clients. There are two methods: # (1) Run multiple OpenVPN daemons, one for each # group, and firewall the TUN/TAP interface # for each group/daemon appropriately. # (2) (Advanced) Create a script to dynamically # modify the firewall in response to access # from different clients. See man # page for more info on learn-address script. ;learn-address ./script # If enabled, this directive will configure # all clients to redirect their default # network gateway through the VPN, causing # all IP traffic such as web browsing and # and DNS lookups to go through the VPN # (The OpenVPN server machine may need to NAT # or bridge the TUN/TAP interface to the internet # in order for this to work properly). ;push "redirect-gateway def1 bypass-dhcp" # Certain Windows-specific network settings # can be pushed to clients, such as DNS # or WINS server addresses. CAVEAT: # http://openvpn.net/faq.html#dhcpcaveats # The addresses below refer to the public # DNS servers provided by opendns.com. ;push "dhcp-option DNS 208.67.222.222" ;push "dhcp-option DNS 208.67.220.220" # Uncomment this directive to allow differenta # clients to be able to "see" each other. # By default, clients will only see the server. # To force clients to only see the server, you # will also need to appropriately firewall the # server's TUN/TAP interface. ;client-to-client # Uncomment this directive if multiple clients # might connect with the same certificate/key # files or common names. This is recommended # only for testing purposes. For production use, # each client should have its own certificate/key # pair. # # IF YOU HAVE NOT GENERATED INDIVIDUAL # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, # EACH HAVING ITS OWN UNIQUE "COMMON NAME", # UNCOMMENT THIS LINE OUT. ;duplicate-cn # The keepalive directive causes ping-like # messages to be sent back and forth over # the link so that each side knows when # the other side has gone down. # Ping every 10 seconds, assume that remote # peer is down if no ping received during # a 120 second time period. keepalive 10 120 # For extra security beyond that provided # by SSL/TLS, create an "HMAC firewall" # to help block DoS attacks and UDP port flooding. # # Generate with: # openvpn --genkey --secret ta.key # # The server and each client must have # a copy of this key. # The second parameter should be '0' # on the server and '1' on the clients. ;tls-auth ta.key 0 # This file is secret # Select a cryptographic cipher. # This config item must be copied to # the client config file as well. ;cipher BF-CBC # Blowfish (default) ;cipher AES-128-CBC # AES ;cipher DES-EDE3-CBC # Triple-DES # Enable compression on the VPN link. # If you enable it here, you must also # enable it in the client config file. comp-lzo # The maximum number of concurrently connected # clients we want to allow. ;max-clients 100 # It's a good idea to reduce the OpenVPN # daemon's privileges after initialization. # # You can uncomment this out on # non-Windows systems. ;user nobody ;group nobody # The persist options will try to avoid # accessing certain resources on restart # that may no longer be accessible because # of the privilege downgrade. persist-key persist-tun # Output a short status file showing # current connections, truncated # and rewritten every minute. status openvpn-status.log # By default, log messages will go to the syslog (or # on Windows, if running as a service, they will go to # the "\Program Files\OpenVPN\log" directory). # Use log or log-append to override this default. # "log" will truncate the log file on OpenVPN startup, # while "log-append" will append to it. Use one # or the other (but not both). ;log openvpn.log ;log-append openvpn.log # Set the appropriate level of log # file verbosity. # # 0 is silent, except for fatal errors # 4 is reasonable for general usage # 5 and 6 can help to debug connection problems # 9 is extremely verbose verb 3 # Silence repeating messages. At most 20 # sequential messages of the same message # category will be output to the log. ;mute 20 I have changed IP's for security

Read the article

Routing a PPTP client and VMware Server instance running on the same box

- by servermanfail

I have a Windows 2003 SBS box. It has 2 physical NIC's: WAN and LAN. The WAN is a public IP. The LAN is a simple 192.168.2.x subnet with Microsoft DHCP Server. Microsoft Routing and Remote Access Service is used to provide NAT to LAN. The box also runs VMware Server with a virtual machine running Windows XP. I want people to be able to VPN into the box, and connect to these virtual machines on the MSRDP port. I can VPN (PPTP) into the 2003 SBS box fine, as well as ping other machines on the LAN. I can ping the VM from a physical workstation on the LAN and vice-versa. I can ping the VPN client from the a physical workstation on the LAN and vice-versa. I can ping the VPN client from the Server console and vice-versa. I can ping the VM client from the Server console and vice-versa. But I cannot ping the VPN client from the VM and vice-versa. I was hoping to set up 2 or 3 Windows XP virtual machines on our only server, so that a couple of people can remote in to work without having to leave a physical machine on in the office. You could this attempted set up a "poor mans terminal server". On the 2003 SBS Server:- C:\Documents and Settings\Administrator>route print IPv4 Route Table =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 50 56 c0 00 08 ...... VMware Virtual Ethernet Adapter for VMnet8 0x3 ...00 50 56 c0 00 01 ...... VMware Virtual Ethernet Adapter for VMnet1 0x10004 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface 0x10005 ...00 11 43 d4 69 13 ...... Broadcom NetXtreme Gigabit Ethernet 0x10006 ...00 11 43 d4 69 14 ...... Broadcom NetXtreme Gigabit Ethernet #2 =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 81.123.144.22 81.123.144.21 1 81.123.144.20 255.255.255.252 81.123.144.21 81.123.144.21 1 81.123.144.21 255.255.255.255 127.0.0.1 127.0.0.1 1 81.255.255.255 255.255.255.255 81.123.144.21 81.123.144.21 1 86.135.78.235 255.255.255.255 81.123.144.22 81.123.144.21 1 109.152.62.236 255.255.255.255 81.123.144.22 81.123.144.21 1 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.2.0 255.255.255.0 192.168.2.3 192.168.2.3 1 192.168.2.3 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.2.26 255.255.255.255 192.168.2.32 192.168.2.32 1 192.168.2.28 255.255.255.255 192.168.2.32 192.168.2.32 1 192.168.2.32 255.255.255.255 127.0.0.1 127.0.0.1 50 192.168.2.50 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.2.255 255.255.255.255 192.168.2.3 192.168.2.3 1 192.168.10.0 255.255.255.0 192.168.10.1 192.168.10.1 20 192.168.10.1 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.10.255 255.255.255.255 192.168.10.1 192.168.10.1 20 192.168.96.0 255.255.255.0 192.168.96.1 192.168.96.1 20 192.168.96.1 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.96.255 255.255.255.255 192.168.96.1 192.168.96.1 20 224.0.0.0 240.0.0.0 81.123.144.21 81.123.144.21 1 224.0.0.0 240.0.0.0 192.168.2.3 192.168.2.3 1 224.0.0.0 240.0.0.0 192.168.10.1 192.168.10.1 20 224.0.0.0 240.0.0.0 192.168.96.1 192.168.96.1 20 255.255.255.255 255.255.255.255 81.123.144.21 81.123.144.21 1 255.255.255.255 255.255.255.255 192.168.2.3 192.168.2.3 1 255.255.255.255 255.255.255.255 192.168.10.1 192.168.10.1 1 255.255.255.255 255.255.255.255 192.168.96.1 192.168.96.1 1 Default Gateway: 81.123.144.22 =========================================================================== Persistent Routes: None C:\Documents and Settings\Administrator>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : 2003server Primary Dns Suffix . . . . . . . : mycompany.local Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : Yes DNS Suffix Search List. . . . . . : mycompany.local gateway.2wire.net Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet 8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.10.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet 1 Physical Address. . . . . . . . . : 00-50-56-C0-00-01 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.96.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : PPP adapter RAS Server (Dial In) Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface Physical Address. . . . . . . . . : 00-53-45-00-00-00 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.2.32 Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : NetBIOS over Tcpip. . . . . . . . : Disabled Ethernet adapter LAN: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet Physical Address. . . . . . . . . : 00-11-43-D4-69-13 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.2.50 Subnet Mask . . . . . . . . . . . : 255.255.255.0 IP Address. . . . . . . . . . . . : 192.168.2.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.2.3 Primary WINS Server . . . . . . . : 192.168.2.3 Ethernet adapter WAN: Connection-specific DNS Suffix . : gateway.2wire.net Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2 Physical Address. . . . . . . . . : 00-11-43-D4-69-14 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 81.123.144.21 Subnet Mask . . . . . . . . . . . : 255.255.255.252 Default Gateway . . . . . . . . . : 81.123.144.22 DHCP Server . . . . . . . . . . . : 10.0.0.1 DNS Servers . . . . . . . . . . . : 10.0.0.1 Primary WINS Server . . . . . . . : 192.168.2.3 NetBIOS over Tcpip. . . . . . . . : Disabled Lease Obtained. . . . . . . . . . : 25 February 2011 22:56:59 Lease Expires . . . . . . . . . . : 25 February 2011 23:06:59 C:\Documents and Settings\Administrator>ping 192.168.2.11 Pinging 192.168.2.11 with 32 bytes of data: Reply from 192.168.2.11: bytes=32 time<1ms TTL=128 Reply from 192.168.2.11: bytes=32 time<1ms TTL=128 Reply from 192.168.2.11: bytes=32 time<1ms TTL=128 Reply from 192.168.2.11: bytes=32 time<1ms TTL=128

Developer IT