Search Results

Search found 30658 results on 1227 pages for 'off screen'.

Page 50/1227 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

  • Staggered Isometric Map: Calculate map coordinates for point on screen

    - by Chris
    I know there are already a lot of resources about this, but I haven't found one that matches my coordinate system and I'm having massive trouble adjusting any of those solutions to my needs. What I learned is that the best way to do this is to use a transformation matrix. Implementing that is no problem, but I don't know in which way I have to transform the coordinate space. Here's an image that shows my coordinate system: How do I transform a point on screen to this coordinate system?

    Read the article

  • No GRUB Screen or recovery mode on Boot after 12.04 Upgrade

    - by Nick
    I tried the live boot CD and boot-repair, also loaded the Desktop install CD, and it looks like all partitions check out OK. However, when I try to boot Linux (the only bootable partition on the computer) I get a blank screen. Every so often the screen give me something akin to: Assuming write through cache Asking for cache data failed it appears to start booting, then hangs. Ctrl+Alt+Delete shuts down the machine The last message during boot is "STarting TiMidity++ ALSA midi emulation... [OK]" I used boot-repair to generate a boot info report. One thing looks odd to me- it reports a missing core.img on /dev/sda1. Here is the full info: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info August 2nd 2012] ============================= Boot Info Summary: =============================== = Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos1)/boot/grub on this drive. = Windows is installed in the MBR of /dev/sdb. sda1: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda1 and looks at sector 18406911 of the same hard drive for core.img, but core.img can not be found at this location. Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/extlinux/extlinux.conf /boot/grub/core.img sda2: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: swap Boot sector type: - Boot sector info: sdb1: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 307,339,514 307,339,452 83 Linux /dev/sda2 307,339,515 312,576,704 5,237,190 5 Extended /dev/sda5 307,339,578 312,576,704 5,237,127 82 Linux swap / Solaris Drive: sdb _______________________________________ Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 2,048 625,142,447 625,140,400 7 NTFS / exFAT / HPFS "blkid" output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 11b4d633-7863-40b2-a6ca-da5f82c3ad0b ext4 /dev/sda5 cb8d65f4-8cf9-4088-b804-e3dea2151033 swap /dev/sdb1 349E7C109E7BC8BE ntfs Personal1 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sdb1 /media/Personal1 fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) /dev/sr0 /live/image iso9660 (ro,noatime) ...(a bunch of config file info- let me know if anyone wants to see it!) But usually I just get "Cannot Display This Video Mode", which I know means the video output is not usable by the monitor. I'm looking for a way to get into a recovery mode.I'd really like to avoid wiping the drive. Any thoughts?

    Read the article

  • Geforce GT240M: How to disable Notebook screen and enable external Monitor

    - by bdr529
    When i attach my Notebook (Nvidia Geforce GT 240M) to my Panasonic-TV via HDMI, both screens are activated. I use Nvidia-Driver Version 260.19.06. I wonder how to deactivate my notebook display automatically or with one Script and switch to the external Monitor when attached. The TV needs an overscan-correction of 100px to display the whole screen. I also want to close the notebook without deactivating the external monitor, what still happens now. Is this possible?

    Read the article

  • Gnome-shell worskpace preview on dual screen

    - by martin
    I'have isntalled gnome3 and I have dual screens(laptop, monitor). Is it possible to see the other monitor in workspace preview in the gnome panel??? I only can see primary monitor, that's why i'm not able to move windows inside the second screen? I've tried to change some settings in dconf , but with no luck. I want to have it like this http://stephen.rees-carter.net/wp-content/uploads/2011/04/Unity-workspace-switcher.png Does anyone have a solution?

    Read the article

  • I can't modify the screen brightness on Xubuntu 13.10

    - by linuxer
    I got this problem with brightness on my fresh xubuntu 13.10 install.. It ain't inc/decrease the screen brightness when pressing Fn+F5/F6 !! I've tried some solutions like setting these values in the /etc/default/grub file and sudo updating grub (this worked for me on my previous xubuntu 13.04 install) GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi_osi=Linux acpi_backlight=vendor" GRUB_CMDLINE_LINUX="acpi_osi=Linux acpi_backlight=vendor" But still not working though :/ I got a Sony VAIO VPCEJ3B1E running xubuntu 13.10 x64bit and an NVidia GeForce 410M and using the propritory drivers 319 Thanks in advace!

    Read the article

  • Backlight screen flickering on a Sony Vaio VPCYB15AL

    - by Mario Zavala
    I've just installed Ubuntu 11.10, and everything went just now when the computer got into suspension, when it got back the screen started flickering, specially on the dashboard, it trends to disappear when i turn down the backlight, at first it was fixed by rebooting the system and now, every time that I start Ubuntu as soon as the desktod loads it starts flickering again, please help! I have a Sony VAIO VPCYB15AL AMD Dual Core E350 with an ATI HD 6310.

    Read the article

  • EPOS Touch Screen

    EPOS system is a computer based system with a monitor or screen for the casher to perform the tasks. The system performs the tasks like scanning barcodes, adding up totals etc with the help of the so... [Author: Alan Wisdom - Computers and Internet - April 05, 2010]

    Read the article

  • Geforce(410m with CUDA) screen resolution on Ubuntu 12.04 issue

    - by Marco K
    I made a succesful installation of Ubuntu 12.04 64-bit on my Sony Vaio PCG-71811M. I have a Geforce 410M with CUDA,it seems works fine and i have already installed packages nvidia-current and nvidia-settings at version 302.17 (I think it's the latest in this moment), but my maximum screen resolution is 1366x768(and in the native display settings it's the same thing). How can I switch it to an highest resolution, like 1920x1080?

    Read the article

  • orange screen with vertical stripes

    - by Skapeven
    After having installed Ubuntu without Internet conecction, I restart the PC, go to BIOS, change boot priority to internal harddrive, save and exit. Then the PC starts again but the screen gets orange with vertical stripes and stays like that. I tried both versions 64 bit and 32 bit 12.04. I can't use internet before having Ubuntu, because y have to make a network configuration(this is not allowed in the trial version before the installed version).

    Read the article

  • 12.10 blue screen, desktop environnement does not load

    - by louis
    just upgraded to Ubuntu 12.10. I can't reach the desktop, it is stuck on the blue screen, the desktop environnement does not load. Can you help please? config: thinkpad T400, 6 GB of Ram, graphic card: Intel Gma 4500Mhd lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) I am not sure I have not messed up lightdm / gdm previously...

    Read the article

  • Where would you implement the code to make a full screen webpage [on hold]

    - by Derek Drummond
    This will be my first time creating a website from the ground up and I would like to get some insight on how to implement a full screen site as well as some problems that may arise from it. I really like the design and layout of sites like uCast and spree. Since I am using ASP.net would this be implemented in the Master page or would this be implemented in the .ASPX file for each specific page on the site?

    Read the article

  • Screen going blank

    - by Deena
    When I am watching videos via VLC or watching videos in Firefox - even when I simply click DASH HOME - Screen goes blank - nothing working - I needed to restart to recover. Not sure which is causing this issue. Is it because of Graphics Card problem - Not installed any proprietary drivers. OS : Ubuntu 12.04 Graphics Card : 1 GB - [AMD/ATI] RV710 [Radeon HD 4350/4550] Could you help me on this. Regards, Deena

    Read the article

  • G210M Screen brightness control issue

    - by Bapun
    I have a Sony VAIO VPCCW15FG laptop with NVIDIA G210M graphics card. I can't adjust the screen brightness! If I use the Fn shortcuts the brightness notification shows-up and there the brightness changes the level but nothing happens. I was able to adjust the brightness level in ZorinOS. But nothing happens when I changed the bright level, then brightness level changes radically with each step in the last stages.

    Read the article

  • Position sprite at center of screen

    - by Wellie
    I am trying to get a sprite to position itself at the center of the screen but nothing seems to be working for me. I'm trying Viewport viewport = graphics.GraphicsDevice.Viewport; logoPosition = new Vector2((viewport.Width - towerImage.Width) / 2, (viewport.Height - towerImage.Height) / 2); and spriteBatch.Draw(towerImage, centre, null, Color.White, 0, baseOrigin, 1.0f, SpriteEffects.None, 0); This is my first time using XNA and I don't really have a clue what I'm doing.

    Read the article

  • Not able to get graphs on screen with gnuplot

    - by user81194
    I have installed 12.04 along with Windows 7 and also installed gnuplot 4.6.0. When I type gnuplot on the terminal, I am getting the error message: Terminal type set to unknown. When I tried plot sin(x), the graph does not appear on the screen. However, I am able to make a postscript file. I tried set terminal 'x11', system responds with: unknown or ambiguous terminal. Please help me solve this problem.

    Read the article

  • How can I fix the screen blurred while installing Ubuntu 12.10 Bate1

    - by Marslo
    I installed Ubuntu 12.10 Bate1 yesterday, but the screen blurred always shows after selecting Install Ubuntu on a Hard Disk option and before waiting for the installation interface. Click here to check the screenshot. The method of installation is by U-disk, the name of Ubuntu 12.10 is quantal-desktop-i386.iso (the download link is from Universal-USB-Installer), and Universal-USB-Installer was used to write the Ubuntu 12.10 into U-disk. PS. Ubuntu 12.04 could be installed successful on my computer!

    Read the article

  • Dual Monitor Lock Screen Problem

    - by Justin Carver
    Ubuntu 12.04 Nvidia GTX 550-Ti x-swat Nvidia driver Problem: Using 2 monitors. When screen locks there is a blue box on top of the wallpaper and password dialog box that hides the field for entering your password or switching users. Problem is on 2 systems with similar hardware (Nvidia card, x-swat driver, dual monitors) You can still type your password in blindly and hit enter to login but it's irritating to not be able to see the dialog box.

    Read the article

  • Screen configuration not saved after first reboot

    - by user20795
    PROBLEM - When installing UBUNTU Natty on my friends Laptop with a HDMI cable attached to both TV and Laptop both screens echo each other BUT when reboot has taken place nothing is displayed on the external screen. Another user has reported the same problem so far ! http://ubuntuforums.org/showthread.php?t=1764389&highlight=hdmi - Gives a clearer description of what we are both experiencing The UBUNTU/Natty install drives both screens but the first reboot does not ? Any ideas anyone

    Read the article

  • Running a VM off a USB 2.0 Flash Drive - Mac/Parallels/XP

    - by geerlingguy
    I use a MacBook Air as my primary machine, and the 128GB SSD means space is precious. To save about 10 GB, I've been running Parallels with a Windows XP VM off an external USB hard drive, which performs as well in everyday use as running the VM off the internal SSD. So, I bought a tiny 32GB USB 2.0 flash drive, plugged it into the MacBook Air, formatted it first as ExFAT (which was slow), then as Mac OS Extended (Journaled) (which was also slow), and copied over my VM file, and ran Parallels off it. My full experience is documented here: http://www.midwesternmac.com/blogs/jeff-geerling/running-windows-xp-vm Straight file copies are really fast — 30 MB/sec read (solid the whole time), and 10-11 MB/sec write (solid the whole time). But I noticed that once XP started running, the disk access rates were in the low KB ranges. Are USB flash drives really that poor at random access, or could I possibly be missing something (the format of the flash drive, etc.?)? Of note, I've tried the following, to no great effect: Formatting the drive as either ExFAT or Mac OS Extended (Journaled) Unplugging all other USB devices and turning off Bluetooth (which runs on the right-side-port USB bus). Plugging in the flash drive either direct in the right side port, or the left side port, or into a USB 2.0 hub

    Read the article

  • Turn off gzip for a location in Nginx

    - by Nyxynyx
    How can gzip be turned off for a particular location and all its sub-directories? My main site is at http://mydomain.com and I want to turn gzip off for both http://mydomain.com/foo and http://mydomain.com/foo/bar. gzip is turned on in nginx.conf. I tried turning off gzip as shown below, but the Response Headers in Chrome's dev tools shows that Content-Encoding:gzip. How should gzip/output buffering be disabled properly? Attempt: server { listen 80; server_name www.mydomain.com mydomain.com; access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; root /var/www/mydomain/public; index index.php index.html; location / { gzip on; try_files $uri $uri/ /index.php?$args ; } location ~ \.php$ { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; include fastcgi_params; fastcgi_read_timeout 300; } location /foo/ { gzip off; try_files $uri $uri/ /index.php?$args ; } }

    Read the article

  • Use external display from boot on Samsung laptop

    - by OhMrBigshot
    I have a Samsung RV511 laptop, and recently my screen broke. I connected an external screen and it works fine, but only after Windows starts. I want to be able to use the external screen right from boot, in order to set the BIOS to boot from DVD, and to then install a different OS and also format the hard drive. Right now I can only use the screen when Windows loads. What I've tried: I've tried opening up the laptop and disconnecting the display to make it only find the external and use the VGA as default -- didn't work. I've tried using the Fn+key combo in BIOS to connect external display - nothing I've been looking around for ways to change boot sequence without entering BIOS, but it doesn't look like it's possible. Possible solutions? A way to change boot sequence without entering BIOS? Someone with the same brand/similar model to help me blindly keystroke the correct arrows/F5/F6 buttons while in BIOS mode to change boot sequence? A way to force the external display to work from boot, through modifying the internal connections (I have no problem taking the laptop apart if needed, please no soldering though), through BIOS or program? Also, if I change boot sequence without accessing external screen, would the Ubuntu 12.1 installation sequence attempt to use the external screen or would I only be able to use it after Linux is installed and running? I'd really appreciate help, I can't afford to fix the screen for a few months from now, and I'd really like to make my computer come back to decent performance! Thanks in advance!

    Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >