Search Results

Search found 59219 results on 2369 pages for 'run script'.

Page 50/2369 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

• How to Load commands into your powershell profile to run on starting powershell

  - by JohnyV

  Hi, I have found a way to load exchange 2010 powershell into powershell running on a windows xp workstation, however there are a few commands that need to run. I was wondering how I could load them into a profile somehow. These are the commands that I need to run before I can do any of the exchange things such as Get-Mailbox. COMMAND 1 $session = New-PSSession -Configurationname Microsoft.Exchange –ConnectionUri http://servername/powershell -Credential $user (it prompts you for a username and p/word then the next command) COMMAND 2 Import-PSSession $session Then I am able to run exchange 2010 commands such as Get-Mailbox. Anyway I can load these so that when I click on the powershell shortcut they preload the importing of exchange commands. Thanks

  Read the article

• Unable to delete a file using bash script

  - by user3719091

  I'm having problems removing a file in a bash script. I saw the other post with the same problem but none of those solutions solved my problem. The bash script is an OP5 surveillance check and it calls an Expect process that saves a temporary file to the local drive which the bash script reads from. Once it has read the file and checked its status I would like to remove the temporary file. I'm pretty new to scripting so my script may not be as optimal as it can be. Either way it does the job except removing the file once it's done. I will post the entire code below: #!/bin/bash #GET FLAGS while getopts H:c:w: option do case "${option}" in H) HOSTADDRESS=${OPTARG};; c) CRITICAL=${OPTARG};; w) WARNING=${OPTARG};; esac done ./expect.vpn.check.sh $HOSTADDRESS #VARIABLES VPNCount=$(grep -o '[0-9]\+' $HOSTADDRESS.op5.vpn.results) # Check if the temporary results file exists if [ -f $HOSTADDRESS.op5.vpn.results ] then # If the file exist, Print "File Found" message echo Temporary results file exist. Analyze results. else # If the file does NOT exist, print "File NOT Found" message and send message to OP5 echo Temporary results file does NOT exist. Unable to analyze. # Exit with status Critical (exit code 2) exit 2 fi if [[ "$VPNCount" > $CRITICAL ]] then # If the amount of tunnels exceeds the critical threshold, echo out a warning message and current threshold and send warning to OP5 echo "The amount of VPN tunnels exceeds the critical threshold - ($VPNCount)" # Exit with status Critical (exit code 2) exit 2 elif [[ "$VPNCount" > $WARNING ]] then # If the amount of tunnels exceeds the warning threshold, echo out a warning message and current threshold and send warning to OP5 echo "The amount of VPN tunnels exceeds the warning threshold - ($VPNCount)" # Exit with status Warning (exit code 1) exit 1 else # The amount of tunnels do not exceed the warning threshold. # Print an OK message echo OK - $VPNCount # Exit with status OK exit 0 fi #Clean up temporary files. rm -f $HOSTADDRESS.op5.vpn.results I have tried the following solutions: Create a separate variable called TempFile that specifies the file. And specify that in the rm command. I tried creating another if statement similar to the one I use to verify that file exist and then rm the filename. I tried adding the complete name of the file (no variables, just plain text of the file) I can: Remove the file using the full name in both a separate script and directly in the CLI. Is there something in my script that locks the file that prevents me from removing it? I'm not sure what to try next. Thanks in advance!

  Read the article

• run sfc /scannow as administrator, but I am administrator

  - by Luigi

  On my windows 2003 I have to run sfc /scannow as admin. I have tried to run it as local administrator and domain administrator, but it says I need of administrator privilege ???? I have tried runas /user:administrator cmd and then on a new shell sfc /scannow. But it does not work too. The error message is: You must be an administrator running a console session in order to use the Windows File Checker utility. the error message is in italian and should be translated in english as above. The following is the cmd's screenshot of the error. I am connected as domain administrator but I run it a runas to be local admin.

  Read the article

• DPM 2010 PowerShell Script to Easily Restore Multiple Files

  - by bmccleary

  I’ve got what I thought would be a simple task with Data Protection Manager 2010 that is turning out to be quite frustrating. I have a file server on one server and it is the only server in a protection group. This file server is the repository for a document management application which stores the files according to the data within a SQL database. Sometimes users inadvertently delete files from within our application and we need to restore them. We have all the information needed to restore the files to include the file name, the folder that the file was stored in and the exact date that the file was deleted. It is easy for me to restore the file from within the DPM console since we have a recovery point created every day, I simply go to the day before the delete, browse to the proper folder and restore the file. The problem is that using the DPM console, the cumbersome wizard requires about 20 mouse clicks to restore a single file and it takes 2-4 minutes to get through all the windows. This becomes very irritating when a client needs 100’s of files restored… it takes all day of redundant mouse clicks to restore the files. Therefore, I want to use a PowerShell script (and I’m a novice at PowerShell) to automate this process. I want to be able to create a script that I pass in a file name, a folder, a recovery point date (and a protection group/server name if needed) and simply have the file restored back to its original location with some sort of success/failure notification. I thought it was a simple basic task of a backup solution, but I am having a heck of a time finding the right code. I have seen the sample code at http://social.technet.microsoft.com/wiki/contents/articles/how-to-use-a-windows-powershell-script-to-recover-an-item-in-data-protection-manager.aspx that I have tried to follow, but it doesn’t accomplish what I really want to do (it’s too simplistic) and there are errors in the sample code. Therefore, I would like to get some help writing a script to restore these files. An example of the known values to restore the data are: DPM Server: BACKUP01 Protection Group: Document Repository Data Protected Server: FILER01 File Path: R:\DocumentRepository\ToBackup\ClientName\Repository\2010\07\24\filename.pdf Date Deleted: 8/2/2010 (last recovery point = 8/1/2010) Bonus Points: If you can help me not only create this script, but also show me how to automate by providing a text file with the above information that the PowerShell script loops through, or even better, is able to query our SQL server for the needed data, then I would be more than willing to pay for this development.

  Read the article

• Running a powershell script at startup

  - by RandellK02

  I am writing a script to remove a computer from the domain, rename it, then add it back. It works fine when I set the trigger to AtLogOn but when I switch to AtStartUp I run into some issues. I get this error when it restarts to run the first scheduled task: 0x8007051F: There are currently no logon servers available to service the logon request. I suspect the script tries to run with no network connection set up so I tested using the RandomDelay parameter, and it worked like its suppose to. I cant rely on a random delay so I am looking for an alternative. Is there a way to test the network status before the script begins or a way to delay the script a specific amount of time? I am using Register-ScheduledJob provided by Powershell 3.0 Thanks in advance

  Read the article

• Attempting to update Amazon Route53 using a script, but domain is not being updated

  - by ks78

  I have several Amazon EC2 instances, running Ubuntu 10.04, with which I'd like to use Amazon's Route53. I setup a script as described in Shlomo Swidler's article, but I'm still missing something. When the script runs, it doesn't return any output, which I initially assumed meant it ran correctly. However, when I check the DNS records using MyR53DNS, there are no entries for my instances. Here's my script: #!/bin/tcsh -f set root=`dirname $0` setenv EC2_HOME /usr/lib/ec2-api-tools setenv EC2_CERT /etc/cron.route53/ec2_x509_cert.pem setenv EC2_PRIVATE_KEY /etc/cron.route53/ec2_x509_private.pem setenv AWS_ACCESS_KEY_ID myaccesskeyid setenv AWS_SECRET_ACCESS_KEY mysecretaccesskey /user/bin/ec2-describe-instances | \ perl -ne '/^INSTANCE\s+(i-\S+).*?(\S+\.amazonaws\.com)/ \ and do { $dns = $2; print "$1 $dns\n" }; /^TAG.+\sShortName\s+(\S+)/ \ and print "$1 $dns\n"' | \ perl -ane 'print "$F[0] CNAME $F[1] --replace\n"' | \ xargs -n 4 $/etc/cron.route53/cli53/cli53.py \ rrcreate -x 60 mydomain.com Does anyone see a problem with this script? If its not the script, what else could be preventing my Route53 domain from being updated? I am using the Security Groups to IP-restrict the instances. I've tried opening port 53, but that didn't seem to have an effect. Is there another port that Route53 uses? I'd appreciate any help or guidance the ServerFault community can offer. Let me know if you need any further info.

  Read the article

• Automating the choice between JPEG and PNG with a script

  - by MHC

  Choosing the right format to save your images in is crucial for preserving image quality and reducing artifacts. Different formats follow different compression methods and come with their own set of advantages and disadvantages. JPG, for instance is suited for real life photographs that are rich in color gradients. The lossless PNG, on the other hand, is far superior when it comes to schematic figures: Picking the right format can be a chore when working with a large number of files. That's why I would love to find a way to automate it. A little bit of background on my particular use case: I am working on a number of handouts for a series of lectures at my unversity. The handouts are rich in figures, which I have to extract from PDF-formatted slides. Extracting these images gives me lossless PNGs, which are needlessly large at times. Converting these particular files to JPEG can reduce their size to up to less than 20% of their original file size, while maintaining the same quality. This is important as working with hundreds of large images in word processors is pretty crash-prone. Batch converting all extracted PNGs to JPEGs is not an option I am willing to follow, as many if not most images are better suited to be formatted as PNGs. Converting these would result in insignificant size reductions and sometimes even increases in filesize - that's at least what my test runs showed. What we can take from this is that file size after compression can serve as an indicator on what format is suited best for a particular image. It's not a particularly accurate predictor, but works well enough. So why not use it in form of a script: I included inotifywait because I would prefer for the script be executed automatically as soon as I drag an extracted image into a folder. This is a simpler version of the script that I've been using for the last couple of weeks: #!/bin/bash inotifywait -m --format "%w%f" --exclude '.jpg' -r -e create -e moved_to --fromfile '/home/MHC/.scripts/Workflow/Conversion/include_inotifywait' | while read file; do mogrify -format jpg -quality 92 "$file" done The advanced version of the script would have to be able to handle spaces in file names and directory names preserve the original file names flatten PNG images if an alpha value is set compare the file size between the temporary converted image and its original determine if the difference is greater than a given precentage act accordingly The actual conversion could be done with imagemagick tools: convert -quality 92 -flatten -background white file.png file.jpg Unfortunately, my bash skills aren't even close to advanced enough to convert the scheme above into an actual script, but I am sure many of you can. My reputation points on here are pretty low, but I will gladly award the most helpful answer with the highest bounty I can set. References: http://www.formortals.com/introducing-cnb-imageguide/, http://www.turnkeylinux.org/blog/png-vs-jpg Edit: Also see my comments below for some more information on why I think this script would be the best solution to the problem I am facing.

  Read the article

• Bash script 'while read' loop causes 'broken pipe' error when run with GNU Parallel

  - by Joe White

  According to the GNU Parallel mailing list this is not a GNU Parallel-specific problem. They suggested that I post my problem here. The error I'm getting is a "broken pipe" error, but I feel I should first explain the context of my problem and what causes this error. It happens when trying to use any bash script containing a 'while read' loop in GNU Parallel. I have a basic bash script like this: #!/bin/bash # linkcheck.sh while read domain do host "$domain" done Assume that I want to pipe in a large list (250mb say). cat urllist | ./linkcheck.sh Running host command on 250mb worth of URLs is rather slow. To speed things up I want to break up the input into chunks before piping it and then run multiple jobs in parallel. GNU Parallel is capable of doing this. cat urllist | parallel --pipe -j0 parallel ./linkcheck.sh {} {} is substituted by the contents of urllist line-by-line. Assume that my systems default setup is capable of running 500ish jobs per instance of parallel. To get round this limitation we can parallelize Parallel itself: cat urllist | parallel -j10 --pipe parallel -j0 ./linkcheck.sh {} This will run 5000'ish jobs. It will also, sadly, cause the error "broken pipe" (bash FAQ). Yet the script starts to work if I remove the while read loop and take input directly from whatever is fed into {} e.g., #!/bin/bash # linkchecker.sh domain="$1" host "$1" Why will it not work with a while read loop? Is it safe to just turn off the SIGPIPE signal to stop the "broken pipe" message, or will that have side effects such as data corruption? Thanks for reading.

  Read the article

• GPO Startup script did not execute on some computers

  - by Aaron Ooi

  The GPO Startup scripts works fine on other machine but not for another half of the machine. gpresult show that GPO was there. I ran RSOP and it show that the Startup script was there but it was never executed. There nothing on application error or anything related to the failed execution in the event viewer. I have set to Allow slow network connection too but it did not help for the startup script to execute. Permission read/execute granted to Domain Computers & Authenticated Users Other GPO settings works except Startup Script did not execute. The scripts works fine as other machine which success without any issue except some machine. I need help to sort this out as it troubles me where another half of the machine did not execute the script at all. It was all WIndows 7.

  Read the article

• forward all mail on a specified domain to script

  - by David

  Hey all! I run a disposable e-mail service that accepts all incoming mail and forwards it to a PHP script that stores it in a database for people to view. Before now, I have been on shared hosting with cPanel, which makes it easy to pipe e-mails to a script. Now, however, I got my own VPS, and it doesn't have cPanel. How do I pipe e-mails to script? Further, how do I pipe emails to any address on certain specified domains to my script? You see, aside from the main domain, there are several alternate domains that people can use if the main domain is blocked, and on each domain I want any address to be usable (xyz@domain, abc@domain, anythingelse@domain). The VPS has Ubuntu 9.04 installed, and I have been experimenting with Postfix, though I can switch to Exim or Sendmail if it is easier.

  Read the article

• Mac - Run java program at launch

  - by emd

  I want to launch a java program (server program) at computer start up. I can run it from the command line perfectly. I created /Library/Server/startFS.sh. The file is executable by root and contains: cd /Library/Server/FiloSync /usr/bin/java -jar /Library/Server/FiloSync/filosync-server-latest.jar -p 7000 -s 7001 I can't get my launchd plist included here, the formatting is all off. I can run it fine from the command line: './startFS.sh' but when I put create the plist (via Lingon), nothing happens. Now, when run, it outputs a few lines to the console. Might that be problem?? I have tried prepending 'nohup' and post pending '&', but no combination seems to work. Help please.

  Read the article

• Need script to redirect STDIN & STDOUT to named pipes

  - by user54903

  I have an app that launches an authentication helper (my script) and uses STDIN/STDOUT to communicate. I want to re-direct STDIN and STDOUT from this script to two named pipes for interaction with another program. E.g.: SCRIPT_STDIN pipe1 SCRIPT_STDOUT < pipe2 Here is the flow I'm trying to accomplish: [Application] - Launches helper script, writes to helpers STDIN, reads from helpers STDOUT (example: STDIN:username,password; STDOUT:LOGIN_OK) [Helper Script] - Reads STDIN (data from app), forwards to PIPE1; reads from PIPE2, writes that back to the app on STDOUT [Other Process] - Reads from PIPE1 input, processes and returns results to PIPE2 The cat command can almost do what I want. If there were an option to copy STDIN to STDERR I could make cat do this with a command (assuming the fictitious option -e echos to STDERR rather than STDOUT): cat -e PIPE2 2PIPE1 (read from PIPE2 and write it to STDOUT, copy input, normally going to STDERR to PIPE1)

  Read the article

• Remote call script as administrator

  - by drupality

  I created a Windows XP bat script to modify etc/hosts file. I want to share this script at other machine, then from another computer I want to invoke these script to modify hosts file at first computer (via LAN). I need some example. I didn't find any example. Is this possible? I try: runas/user:username block.bat On the same machine login as guest but it doesn't work. No errors just "Attempting to call block.bat" and end of invocation. As admin script works ok. Could someone give me any advice?

  Read the article

• How do I run unsigned driver permanently?

  - by acidzombie24

  I compiled my own truecrypt for windows and doing the suggested F8 to run unsigned drivers worked. I was able to install and run truecrypt successfully. However when i restart the machine and let it boot normally I can no longer use truecrypt because of unsigned drivers even though I have it installed. What can I do to boot normally and use my build of truecrypt? Can i modify the registry, add an exception, can i sign my own driver without paying anything (but it probably only work on my machine which is 100% fine), What can i do to run my own truecrypt build on a normal bootup?

  Read the article

• I get a "could not create lock file" error when trying to run Postgres

  - by zermy

  I recently had to replace my postgresql.conf file, and I thought I got the settings right, but when I try to run Postgresql, I get this error: ESTFATAL: could not create lock file "/var/run/postgresql/.s.PGSQL.5432.lock": No such file or directory My workaround is to go as root and create a folder called postgresql in /var/run and then change the owner of the folder to postgres. The biggest problem is that I need to do this every single time my computer starts, the folder somehow deletes itself. I tried commenting out the external pid file bit in the conf file, but that didn't change anything.

  Read the article

• Powershell (sqlps) lastbackupdate not changing despite having run a sqlserver backup

  - by user1666376

  I'm using Powershell to check last backup times across all our sqlserver databases. This seems to work really well, but I've got a question If I run this (a cut-down version of the actual script): dir SQLSERVER:\SQL\Server1\default\databases | select parent, name, lastbackupdate I get: Parent Name LastBackupDate ------ ---- -------------- [Server1] ADBA 10/09/2012 21:15:37 [Server1] ReportServer 10/09/2012 21:00:17 [Server1] ReportServerTempDB 10/09/2012 21:00:18 [Server1] db1 10/09/2012 21:15:35 If I then run a sql backup of the Server1 default instance, and run the same query the last backup date doesn't change: PS C:\temp> dir SQLSERVER:\SQL\Server1\default\databases | select parent, name, lastbackupdate Parent Name LastBackupDate ------ ---- -------------- [Server1] ADBA 10/09/2012 21:15:37 [Server1] ReportServer 10/09/2012 21:00:17 [Server1] ReportServerTempDB 10/09/2012 21:00:18 [Server1] db1 10/09/2012 21:15:35 ..but if I open a new powershell window, it shows the backup I just took: PS SQLSERVER:\> dir SQLSERVER:\SQL\Server1\default\databases | select parent, name, lastbackupdate Parent Name LastBackupDate ------ ---- -------------- [server1] ADBA 12/09/2012 09:03:23 [server1] ReportServer 12/09/2012 08:48:03 [server1] ReportServerTempDB 12/09/2012 08:48:04 [server1] db1 12/09/2012 09:03:21 My guess is that this is expected behaviour, but could anybody show me where it's documented/explained - I just want to understand what's going on. This is running the SQlps which came with 2008, against a 2008 instance. Thanks Matt

  Read the article

• Rails: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock'

  - by misbehavens

  So I've got a Ruby on Rails application that I am trying to run (in development) on Snow Leopard. I've got it working on my Ubuntu computer, but now I need to get my Snow Leopard environment set up. Originally, I installed the MySQL 2.8.1 Ruby Gem and was running into this issue: uninitialized constant MysqlCompat::MysqlRes But thanks to this tutorial I was able to resolve it by running this command and installing a previous version of the Gem: export ARCHFLAGS="-arch i386 -arch x86_64" ;sudo gem install --no-rdoc --no-ri -v=2.7 mysql -- --with-mysql-dir=/usr/local/mysql --with-mysql-config=/usr/local/mysql/bin/mysql_config Now that I've resolved that issue, I'm running into a different error: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' This happens when I try to run rake db:migrate as well as when the server is running. How can I resolve this issue?

  Read the article

• Linux: Schedule command to run once after reboot (RunOnce equivalent)

  - by Christopher Parker

  I'd like to schedule a command to run after reboot on a Linux box. I know how to do this so the command consistently runs after every reboot with a @reboot crontab entry, however I only want the command to run once. After it runs, it should be removed from the queue of commands to run. I'm essentially looking for a Linux equivalent to RunOnce in the Windows world. In case it matters: $ uname -a Linux devbox 2.6.27.19-5-default #1 SMP 2009-02-28 04:40:21 +0100 x86_64 x86_64 x86_64 GNU/Linux $ bash --version GNU bash, version 3.2.48(1)-release (x86_64-suse-linux-gnu) Copyright (C) 2007 Free Software Foundation, Inc. $ cat /etc/SuSE-release SUSE Linux Enterprise Server 11 (x86_64) VERSION = 11 PATCHLEVEL = 0 Is there an easy, scriptable way to do this?

  Read the article

• Timing issue with autohotscript, fails to dump or open destination file

  - by learnerforever

  I've created a autohotscript to quickly dump selected text into my jot file on the Desktop and I think I'm facing a timing error. The script works like thus: Select text when reading a text file, browsing internet, reading PDF, etc. Hit Ctrl + J Contents of selected text is dumped into my jot file. When I press Ctrl + J very quickly, it sometimes doesn't come up in my jot file and sometimes when I keep pressing Ctrl + J for a long time, many instances of the text appear. Could somebody please point out what's wrong with this script and how I can improve it. ^j:: Clipboard := "" ; clear Send, ^c ; simulate Ctrl+C (=selection in clipboard) selection = %Clipboard% ; save the content of the clipboard FileAppend, `n%selection%`n,C:\Users\jagrati\Desktop\jots.txt return

  Read the article

• Can not run ifconfig like commands via browser

  - by savruk

  Hi, Problem is I cannot run "ifconfig" or similar commands via browser. Environment: Programming language : python Server : lighttpd(CGI) , running on busybox. Well machine is really small and so I am really restricted. Tried techniques: chown every script to root. But there is no differences. Why? Because lighttpd runs under another user, I mean not under root. As it is not root, when I try to run script from browser it always calls the python file with its uid. So it makes it impossible to run "ifconfig eth0 192.168.2.123" like commands via web browser. I get "ifconfig: SIOCSIFADDR: Permission denied" error. What can I do? I do not have any sudoers file, so cannot modify sudo command. Well, I don't even have "sudo" command :) Thanks for your help

  Read the article

• Run shell script on a command

  - by LinuxPenseur

  Hi, I want to run a shell script when date -s <string> command is used. For example i want to log the command to the file /tmp/user.log by executing the following command in the shell script logger -p user.notice "date -s command executed" -f /tmp/user.log How can run a shell script when date -s <string> is executed on the shell? To make it more general, I want to run my shell script when someone else issues a particular linux command on my system. How to do this?

  Read the article

• using svnadmin in a php script

  - by fabjoa

  Howdie Scenario: Allow developers to submit new application packages to a market server. Developers run a bash script which contains a cURL call to market server (localhost/market/submit/$app-name). The submit script on the server creates a new folder in existing svn server with the name of the submitted app. Script on dev side waits for HTTP to issue a success message and then do a svn checkout in dev local machine. Problem: The submit script on the market server failed to create new svn directory through code: echo `svnadmin mkdir -m 'added new package $package' http://localhost/market/packages/$package`; this does not echo nothing and when I go on http://localhost/market/packages, the folder has not been added and the revision number has not been incremented. I've tried from a terminal in market server chown root:www-data /usr/bin/svnadmin but still no luck. Somebody has come acrosss similar problem? Any solutions? Thanks! Profile: Linux/Ubuntu, apache subversion

  Read the article

• HOWTO run Wordpress site along with Tomcat web aplication on the same server

  - by Chantz

  I am building a solution where the CMS part of the site (i.e. About US, Contact etc) will be run on Wordpress & the private pages will be a Java-Servlet based stack run on Tomcat 7. Both of these "apps" have to run on the same server for budget reasons, at least for now. What I want to know how to make this happen (via configurations, setups etc)? So that whenever users come to public pages they will be served content from Wordpress but for private pages (here I am assuming there will be a URL pattern differentiating this) then it will be served by Tomcat I am assuming here that I will be using Apache as the server for fronting the wordpress requests. Also it is an Ubuntu 12.04 server.

  Read the article

• bash script with permanent ssh connection

  - by samuelf

  I use a bash script which runs /usr/bin/ssh -f -N -T -L8888:127.0.0.1:3306 [email protected] However, when I run the bash script, it waits.. I see the connection coming up but the script doesn't exit.. it's like it's waiting for the SSH process to finish, because when I manually kill it the bash script finishes as well. Any ideas how to resolve this? UPDATE: I have croned this script.. and the cron process is the one that becomes a zombie.. the actual scripts runs just fine, sorry about that, with ps -auxf I get: root 597 0.0 0.7 2372 912 ? Ss Jul12 0:00 cron root 2595 0.0 0.8 2552 1064 ? S 02:09 0:00 \_ CRON 1001 2597 0.0 0.0 0 0 ? Zs 02:09 0:00 \_ [sh] <defunct> 1001 2603 0.0 0.0 0 0 ? Z 02:09 0:00 \_ [cron] <defunct> and when I kill the ssh the defuncts disappear.. why would they become defunct?

  Read the article

• Linux - Scriptable email client?

  - by Phog

  Hi, I'm writing a simple UI for the visually impaired using a speech synthesizer. I've looked all over the internet for an email client which I can script to fit these purposes but to no avail. I believe several CLI email clients(eg MUTT) allow sending emails with command line arguments only. But I've yet to find a client that can download the emails, decode them and then dump them to a text file. The best candidate so far seems to be mailx, but it seems like it needs quite a lot of babysitting to fit my needs. Any suggestions for scripting-friendly email clients? Am I missing something fundamental about MUTT? Are there any libraries/programs that help me decode the MIME encoding used in todays emails from a maildir? Should I just bite the bullet and write a script for mailx? Thanks in advance.

  Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >