Search Results

Search found 26223 results on 1049 pages for 'visual c 2008 express'.

Page 50/1049 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

• Seemingly random disconnections on Windows Server 2008 R2

  - by bobblez

  So I have a box running a Windows Server 2008 R2 in my LAN, which is running, among other things, a voip server used by other people. I myself am in the same subnet with the server, while the other users are not. Now, maybe on average twice a day, all the other users get disconnected from the server (and if I take a remote desktop connection to it, I'm not able to open any web pages either). These disconnections usually last only about 5 seconds, but sometimes they may last up to a minute. What could possibly cause this? I have all the updates installed from windows update and the motherboard of the server is asus p5b deluxe (if that is of any interest). edit: Forgot to mention that my own internet connectivity stays intact while the server's does not, and both computers are behind the same router.

  Read the article

• my.ini optimization on Windows 2008 R2 VPS

  - by MKphpDev

  I have a vmware VPS running Windows Server 2008 R2 Enterprise that has performance issues with MySQL. Every few minutes, MySQL stall for few seconds then responed to queries. I'm sure that my.ini need to be optimized, but unfortunately, I don't have any idea of my.ini configuration. What's running on the server: 2 small wordpress blogs, 1 vbulletin forums (approx. 1.2 GB database, and increasing), small database for some sort of plug-ins (no more than 4000 records) Server Info: Processor: Intel Xeon X5550 @ 2.67GHz, RAM: 6 GB (memory useage never exceeded 2 GB), MySQL 5.5, PHP 5.3.10, IIS 7 current my.ini: [mysqld] default-storage-engine=INNODB sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE _USER,NO_ENGINE_SUBSTITUTION" max_connections=250 myisam_max_sort_file_size=20G innodb_additional_mem_pool_size=256M innodb_flush_log_at_trx_commit=1 innodb_log_buffer_size=8M innodb_buffer_pool_size=512MB innodb_log_file_size=128M innodb_thread_concurrency=10 key_buffer_size = 512M myisam_sort_buffer_size = 8M join_buffer_size = 256K read_buffer_size = 256K sort_buffer_size = 256K table_cache = 4000 thread_cache_size = 200 wait_timeout = 30 connect_timeout = 10 tmp_table_size = 32M max_allowed_packet = 1M max_connect_errors = 10000 query_cache_size = 16M query_cache_limit = 2M query_cache_type = 1 query_cache_min_res_unit = 1024 query_prealloc_size = 16384 query_alloc_block_size = 16384 skip-external-locking read_rnd_buffer_size=1M max_heap_table_size=16M thread_concurrency=8 [mysqld_safe] open_files_limit = 8192 [mysqldump] quick max_allowed_packet = 16M [myisamchk] key_buffer_size = 128M sort_buffer_size = 128M read_buffer = 2M write_buffer = 2M any help with that, please?

  Read the article

• Server 2008 Hyper-V User Accounts to access each other

  - by asn1981

  Hi, I have a windows server 2008 r2 with 3 hyper-v vm's IIS server Sql server 3 - Mail server I'm new to networking/server configuration. I have created a Virtual Network and can see each of the 3 VMs as well as the host on the network. I can connect from each VM to the host using the admin account. However, what would be the best (secure) way to create connections/accounts between the VMs, presumabely this shouldn't be done with an admin account but one with lesser priveledges. For example, to be able to access the SQL Server VM from the IIS server VM?

  Read the article

• Previous Versions delayed with SBS 2008 / Windows 7

  - by indeed005

  The SBS 2008 at this site has Previous Versions enabled on a mapped drive. The snapshots happen 3 times a day. I doubt they take very long; the diff size is only a few GB. The problem is that the users on Windows 7 cannot see their previous versions until a few hours later. Is there some indexing that has to happen before the Previous Versions are visible to the client machines? Edit: In the application log, 3 minutes after every scheduled backup, there is an event for VSS (EventID 8224) saying "The VSS service is shutting down due to idle timeout" Apparently this means it has finished successfully, even though modified files still do not show another version.

  Read the article

• Prioritize file sharing capabilities in Windows Server 2008

  - by cmbrnt

  I've got a server running Windows Server 2008, and use it mainly for sharing files throughout the domain from a number of disks. It's running on VMware ESXi 4.0, in case that matters. My problem is that when I log in to the server to check user permissions etc, the access speed the files on the remote disks almost grinds to a halt. I havn't been able to measure the speeds, but I would guess it slows down to about 100kB/s as soon as I log in. This is on a gigabit network and the problems are equal for all users, even the ones connected to the same switch as the server. I've assigned 2 GB RAM to the server, and reserved it 1,5Ghz processor power. I don't have to do anything special on the server for this halt to occur. How can I make sure file sharing is prioritized on the server, so no matter what applications I'm using it will always make sure file sharing works properly? Could this be a VMware issue?

  Read the article

• Can i use a Windows 2008 r2 Cluster for file redundancy

  - by JERiv

  I'm researching a sever clustering architecture as a redundancy and backup solution for a client, and something that isn't made clear is whether or not i can use server clustering to replace a file server with backup solution. Forgive my Elementary understanding of server clustering but supposing: 2 Sites (NJ, CA) Identical Servers at each site setup as a Remote Site Cluster nodes with Windows Enterprise server 2008 r2 Services: File, Terminal, AD, and maybe DNS Will the following will be true: Files (including data drives) will be synced between the two servers eliminating the need for third party backup/mirroring software to sync/backup files. Also supposing i use roaming profiles w/ folder redirection; How will client computer in the WAN access their data through the cluster (i.e. will they automatically choose the best route)

  Read the article

• EC2 Windows 2008 VM import Not Working

  - by remack

  I am trying to upload a Windows 2008 SP2 server image to Amazon EC2, but once the process is complete, I can't connect to it. I had ops export a VMDK from our datacenter. The image appeared to have a fixed IP, so I loaded it in VMWare player and enabled DHCP. I uploaded it following amazon's instructions: http://aws.amazon.com/ec2/vmimport/ I start the new instance and try to RDP to the public DNS; connection fails. My two thoughts are: Loading it in VMWare player messed it up somehow, since the instructions say use an ESX image. The image they made me had the wrong network adapter type. The image has an Intel(R) PRO/1000 MT adapter using the E1G60I32.sys driver.

  Read the article

• Website project takes a long time to load in VS.NET 2008

  - by rm

  After getting a new computer (a lot faster than the one I've used before) my Solutions take A LONG TIME (3-4 minutes) to load up in VS.NET 2008. I only have 2 projects in the solution: DB Project and Website Project (from IIS). If I remove the Website Project from Solution - it loads up instantly, when I add that same website project to the OPEN Solution - it loads up instantly. The only time it's slow is when I open the solution referencing my Website project. I had the exact same setup (as far as VS is concerned) on my old box, and never had this problem. Any ideas?

  Read the article

• Backing up to USB drives in 2008 R2

  - by jbbarnes

  I set up backups in 2008 R2 to backup to a USB drive, and the backup program formatted the drive so it doesn't appear with a drive letter. Rotating to the next of four backup drives breaks the backups because it has an NTFS partition on it. I don't see a way to prepare each of my USB drives to be used for backups. What kind of formatting is the backup program expecting to find and write to and how do I ensure my other USB drives can be rotated? Thanks.

  Read the article

• How to create SQL Server Express DB from SQL Server DB

  - by jeff

  I have a SQL Server 2008 DB. I want to extract SOME tables (and associated schema, constraints, indexes, etc) and create a SQL Server Express DB. It isn't a sync of the target, we stomp on it. We ONLY need to do this in the file system (not across the wire). We are not fond of the synchronization stuff and at this point don't know how to run SSIS. We are a C# shop and a little code is ok. Like using the C# bulk import stuff, but that won't create the schema. Suggestions?

  Read the article

• sql server 2008 express. cannot create mdf databse.

  - by yair

  Hi, I'm working with visual studio 2008 express and sql 2008 express. I'm trying to create mdf database (Add new Item ...)and I recieve the following error message: "a network-related or instance-specific error occured while establishing a connection to SQL Server. The server was not found or was not accessible. Verfy that instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named pipes Provider:40 - could not open connection to SQL)" Why ? Is it possible to create mdf database with SQL 2008 Express ? If it is then what to do ?

  Read the article

• Windows Server 2008 / SQL 2008 Licensing for Authenticated Web Application

  - by MikeM

  Hello, I'm trying to crunch some numbers to see what the software costs involved are for hosting an application we are developing. Users will not be anonymous - they will need to log in. SQL Server 2008: SQL Server licensing is easy - it will be licensed per-processor. No real fuss there. The cost of CALs would be much higher for the number of users as compared to the processor licenses. Windows Server 2008: This is where it gets trickier. We need to license the OS for both the web servers (there will be a couple) plus the database servers (also a couple). The Web Servers could run on the Web Edition without a need for CALs, but if you continue reading, you will see that may not matter much because I will likely have user CALs for each user anyway. We can't use the "External Connector" for any of the Windows licenses, because that doesn't cover customers who are paying to access a hosted application. We can't use the Web Edition for the SQL Servers because that license only allows database running on Web Edition to host data for the local web application (i.e. other web servers can't connect to it). So that leaves us with the "full" editions of Windows Server for the database server OS. I find this a little rediculous, and I feel as though I must be missing something, but it looks to me like I will actually need to buy a CAL for every user who signs up to use our service. I feel like I'm missing something because that means that for every user, I have to shell out $40 for a CAL. That could be one or two years' worth of revenue from each user for an inexpensive service! Is there any way to serve a web application to authenticated users without paying for individual Windows Server CALs, if the web servers and SQL servers are seperate boxes?

  Read the article

• Overview of Microsoft SQL Server 2008 Upgrade Advisor

  - by Akshay Deep Lamba

  Problem Like most organizations, we are planning to upgrade our database server from SQL Server 2005 to SQL Server 2008. I would like to know is there an easy way to know in advance what kind of issues one may encounter when upgrading to a newer version of SQL Server? One way of doing this is to use the Microsoft SQL Server 2008 Upgrade Advisor to plan for upgrades from SQL Server 2000 or SQL Server 2005. In this tip we will take a look at how one can use the SQL Server 2008 Upgrade Advisor to identify potential issues before the upgrade. Solution SQL Server 2008 Upgrade Advisor is a free tool designed by Microsoft to identify potential issues before upgrading your environment to a newer version of SQL Server. Below are prerequisites which need to be installed before installing the Microsoft SQL Server 2008 Upgrade Advisor. Prerequisites for Microsoft SQL Server 2008 Upgrade Advisor .Net Framework 2.0 or a higher version Windows Installer 4.5 or a higher version Windows Server 2003 SP 1 or a higher version, Windows Server 2008, Windows XP SP2 or a higher version, Windows Vista Download SQL Server 2008 Upgrade Advisor You can download SQL Server 2008 Upgrade Advisor from the following link. Once you have successfully installed Upgrade Advisor follow the below steps to see how you can use this tool to identify potential issues before upgrading your environment. 1. Click Start -> Programs -> Microsoft SQL Server 2008 -> SQL Server 2008 Upgrade Advisor. 2. Click Launch Upgrade Advisor Analysis Wizard as highlighted below to open the wizard. 2. On the wizard welcome screen click Next to continue. 3. In SQL Server Components screen, enter the Server Name and click the Detect button to identify components which need to be analyzed and then click Next to continue with the wizard. 4. In Connection Parameters screen choose Instance Name, Authentication and then click Next to continue with the wizard. 5. In SQL Server Parameters wizard screen select the Databases which you want to analysis, trace files if any and SQL batch files if any.  Then click Next to continue with the wizard. 6. In Reporting Services Parameters screen you can specify the Reporting Server Instance name and then click next to continue with the wizard. 7. In Analysis Services Parameters screen you can specify an Analysis Server Instance name and then click Next to continue with the wizard. 8. In Confirm Upgrade Advisor Settings screen you will be able to see a quick summary of the options which you have selected so far. Click Run to start the analysis. 9. In Upgrade Advisor Progress screen you will be able to see the progress of the analysis. Basically, the upgrade advisor runs predefined rules which will help to identify potential issues that can affect your environment once you upgrade your server from a lower version of SQL Server to SQL Server 2008. 10. In the below snippet you can see that Upgrade Advisor has completed the analysis of SQL Server, Analysis Services and Reporting Services. To see the output click the Launch Report button at the bottom of the wizard screen. 11. In View Report screen you can see a summary of issues which can affect you once you upgrade. To learn more about each issue you can expand the issue and read the detailed description as shown in the below snippet.

  Read the article

• Confluence or apache on win server 2008 cant find scripts and images :(

  - by Ishak

  I am a newbie to both Tomcat and Apache. I have set the virtual hosts as described in Here. And JIRA works fine when i browse the URL jira.agmlab.com. However when i try to access Confluence(3.4.5) with confluence.agmlab.com the pages come in plain html, i can login and browse pages but there is no css or js so that my confluence pages look very ugly. what can possibly cause this and how to fix this? here is my virtual hosts definitions : # # Virtual Hosts # # If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. Most configurations # use only name-based virtual hosts so the server doesn't need to worry about # IP addresses. This is indicated by the asterisks in the directives below. # # Please see the documentation at # <URL:http://httpd.apache.org/docs/2.2/vhosts/> # for further details before you try to setup virtual hosts. # # You may use the command line option '-S' to verify your virtual host # configuration. # # Use name-based virtual hosting. # NameVirtualHost * # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for all requests that do not # match a ServerName or ServerAlias in any <VirtualHost> block. # <VirtualHost *> ServerName confluence.agmlab.com ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / http://localhost:8081/confluence/ ProxyPassReverse / http://localhost:8081/confluence/ # ProxyHTMLURLMap /confluence/ / <Location /> Order allow,deny Allow from all </Location> </VirtualHost> <VirtualHost *> ServerName jira.agmlab.com ProxyRequests Off ProxyPreserveHost On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / http://localhost:8080/ ProxyPassReverse / http://localhost:8080/ <Location /> Order allow,deny Allow from all </Location> </VirtualHost> and i added 127.0.0.1 jira.agmlab.com 127.0.0.1 confluence.agmlab.com to my hosts file (i am using Win Server 2008 OS). here is part of the error log from Apache access.log file : 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1.0/_/download/resources/confluence.web.resources:aui-forms/confluence-forms.css HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/3.4.5/_/download/batch/com.atlassian.confluence.keyboardshortcuts:confluence-keyboard-shortcuts/com.atlassian.confluence.keyboardshortcuts:confluence-keyboard-shortcuts.css HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/0.7/_/download/batch/com.atlassian.plugins.shortcuts.atlassian-shortcuts-module:shortcuts/com.atlassian.plugins.shortcuts.atlassian-shortcuts-module:shortcuts.css HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1/_/download/superbatch/js/batch.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1.0/_/download/batch/confluence.web.resources:login/confluence.web.resources:login.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1/_/download/superbatch/css/batch.css?media=print HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1/_/styles/combined.css HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1.2.2/_/download/batch/com.atlassian.confluence.plugins.doctheme:splitter/com.atlassian.confluence.plugins.doctheme:splitter.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/1.0/_/download/batch/legacy.confluence.web.resources:prototype/legacy.confluence.web.resources:prototype.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/0.7/_/download/batch/com.atlassian.plugins.shortcuts.atlassian-shortcuts-module:shortcuts/com.atlassian.plugins.shortcuts.atlassian-shortcuts-module:shortcuts.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/3.4.5/_/download/batch/com.atlassian.confluence.keyboardshortcuts:confluence-keyboard-shortcuts/com.atlassian.confluence.keyboardshortcuts:confluence-keyboard-shortcuts.js HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/images/logo/confluence_48_white.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/opensearch/osd.action HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:13:34 +0200] "GET /confluence/s/2035/1/_/images/logo/confluence_16.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:16:27 +0200] "POST /plugins/servlet/gadgets/security-tokens HTTP/1.1" 200 525 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/favicon.ico HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/s/2035/1/_/images/logo/confluence_16.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/s/2035/1/_/images/icons/profilepics/anonymous.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/images/logo/confluence_48_white.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/images/icons/star_grey.gif HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/s/2035/1/_/images/icons/add_12.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:08 +0200] "GET /confluence/images/border/spacer.gif HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:11 +0200] "GET /confluence/favicon.ico HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:11 +0200] "GET /confluence/s/2035/1/_/images/logo/confluence_16.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:12 +0200] "GET /confluence/s/2035/1/_/images/icons/add_12.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:12 +0200] "GET /confluence/s/2035/1/_/images/icons/profilepics/anonymous.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:12 +0200] "GET /confluence/images/logo/confluence_48_white.png HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:12 +0200] "GET /confluence/images/border/spacer.gif HTTP/1.1" 404 2788 127.0.0.1 - - [03/Jan/2011:16:19:12 +0200] "GET /confluence/images/icons/star_grey.gif HTTP/1.1" 404 2788 I can see the pages properly with js and css and images when i use confluence with URL localhost:8081/confluence. i have just set the base url of confluence to "confluence.agmlab.com" and then restarted both confluence and apache but nothing changed, and i also checked settings for jira, and its base URL is localhost:8080 but it works fine. Can it be something related with the permissions defined in Win Server 2008 ? maybe there is not enough rights (such as read execute ) in some users, directories ??

  Read the article

• Windows Server 2008 R2 network adapter stops working, requires hard reboot

  - by Geoff Dalgas

  TL;DR version: Turns out this was a Windows Server 2008 R2 kernel networking bug. After siccing Microsoft support on it, we (eventually) got an unpublished kernel hotfix from Microsoft to address it. If you, too, are experiencing mysterious low-level network driver failures requiring a reboot/bluescreen cycle, you might want that hotfix (or maybe Service Pack 1 whenever it is released, too.) We have been using HAProxy along with heartbeat from the Linux-HA project. We are using two linux instances to provide a failover. Each server has with their own public IP and a single IP which is shared between the two using a virtual interface (eth1:1) at IP: 69.59.196.211 The virtual interface (eth1:1) IP 69.59.196.211 is configured as the gateway for the windows servers behind them and we use ip_forwarding to route traffic. We are experiencing an occasional network outage on one of our windows servers behind our linux gateways. HAProxy will detect the server is offline which we can verify by remoting to the failed server and attempting to ping the gateway: Pinging 69.59.196.211 with 32 bytes of data: Reply from 69.59.196.220: Destination host unreachable. Running arp -a on this failed server shows that there is no entry for the gateway address (69.59.196.211): Interface: 69.59.196.220 --- 0xa Internet Address Physical Address Type 69.59.196.161 00-26-88-63-c7-80 dynamic 69.59.196.210 00-15-5d-0a-3e-0e dynamic 69.59.196.212 00-21-5e-4d-45-c9 dynamic 69.59.196.213 00-15-5d-00-b2-0d dynamic 69.59.196.215 00-21-5e-4d-61-1a dynamic 69.59.196.217 00-21-5e-4d-2c-e8 dynamic 69.59.196.219 00-21-5e-4d-38-e5 dynamic 69.59.196.221 00-15-5d-00-b2-0d dynamic 69.59.196.222 00-15-5d-0a-3e-09 dynamic 69.59.196.223 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 225.0.0.1 01-00-5e-00-00-01 static On our linux gateway instances arp -a shows: peak-colo-196-220.peak.org (69.59.196.220) at <incomplete> on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-222.peak.org (69.59.196.222) at 00:15:5d:0a:3e:09 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 Why would arp occasionally set the entry for this failed server as <incomplete>? Should we be defining our arp entries statically? I've always left arp alone since it works 99% of the time, but in this one instance it appears to be failing. Are there any additional troubleshooting steps we can take help resolve this issue? THINGS WE HAVE TRIED I added a static arp entry for testing on one of the linux gateways which still didn't help. root@haproxy2:~# arp -a peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-221.peak.org (69.59.196.221) at 00:15:5d:00:b2:0d [ether] on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 peak-colo-196-220.peak.org (69.59.196.220) at 00:21:5e:4d:30:8d [ether] PERM on eth1 root@haproxy2:~# arp -i eth1 -s 69.59.196.220 00:21:5e:4d:30:8d root@haproxy2:~# ping 69.59.196.220 PING 69.59.196.220 (69.59.196.220) 56(84) bytes of data. --- 69.59.196.220 ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 6006ms Rebooting the windows web server solves this issue temporarily with no other changes to the network but our experience shows this issue will come back. Swapping network cards and switches I noticed the link light on the port of the switch for the failed windows server was running at 100Mb instead of 1Gb on the failed interface. I moved the cable to several other open ports and the link indicated 100Mb for each port that I tried. I also swapped the cable with the same result. I tried changing the properties of the network card in windows and the server locked up and required a hard reset after clicking apply. This windows server has two physical network interfaces so I have swapped the cables and network settings on the two interfaces to see if the problem follows the interface. If the public interface goes down again we will know that it is not an issue with the network card. (We also tried another switch we have on hand, no change) Changing network hardware driver versions We've had the same problem with the latest Broadcom driver, as well as the built-in driver that ships in Windows Server 2008 R2. Replacing network cables As a last ditch effort we remembered another change that occurred was the replacement of all of the patch cords between our servers / switch. We had purchased two sets, one green of lengths 1ft - 3ft for the private interfaces and another set of red cables for the public interfaces. We swapped out all of the public interface patch cables with a different brand and ran our servers without issue for a full week ... aaaaaand then the problem recurred. Disable checksum offload, remove TProxy We also tried disabling TCP/IP checksum offload in the driver, no change. We're now pulling out TProxy and moving to a more traditional x-forwarded-for network arrangement without any fancy IP address rewriting. We'll see if that helps. Switch Virtualization providers On the off chance this was related to Hyper-V in some way (we do host Linux VMs on it), we switched to VMWare Server. No change. Switch host model We've reached the end of our troubleshooting rope and are now formally involving Microsoft support. They recommended changing the host model: http://en.wikipedia.org/wiki/Host_model http://technet.microsoft.com/en-us/magazine/2007.09.cableguy.aspx We did that, and.. we'll see.

  Read the article

• Visual Studio hangs Windows

  - by Kronikarz

  I have: Windows XP Pro SP3 with latest updates, drivers, .NET, etc. Pentium 4 2.8GHz 2GB RAM 150GB HD ATI Radeon HD 3400 Recently (as early as a week ago) Visual C++ (both 2005 Pro and 2008 Express) started hanging up my computer. Whenever they are run, after 5-20 minutes of work the computer freezes. Everything becomes unresponsive, including the mouse cursor. No combination of keys does anything. What's strange, is that Winamp/Firefox continues to play whatever it was playing at the time (internet radio, mp3 playlist, etc). The only thing I can do is a hard reboot. I've run CCleaner and a full AVG antivirus scan, both of which found nothing suspicious. Does anyone know of a solution to this problem?

  Read the article

• How can I get Visual Studio 2008 to align my assignment operators?

  - by Alison R.

  I had this in Vim and miss it dearly now that I'm confined to Visual Studio. I'd like to take this: MyType type_obj = new MyType(); MyLongerType longer_type_obj = new LongerType() To this: MyType type_obj = new MyType(); LongerType longer_type_obj = new LongerType() I have found some macros for this on the web, but they seem to be for an older version of Visual Studio (< 2008). Here is one from 2000. Edit: Further digging in Google turned up this one: http://www.omegacoder.com/?p=8 It seems to work to align equals signs, but I haven't yet figured out if it can align the local variable names, too. Still no clue as to whether I could just get it to perform this sort of behavior with a Ctrl E+D, although that might not be practical considering how it works. (It aligns going down from the line which currently has focus.)

  Read the article

• Windows Server 2008 R2 Error CAPI2 Event ID 4107

  - by umar bhatti

  I am getting following error on couple of my 2008 R2 servers. I have tried couple of fixes which didn't fix the issues. Log Name: Application Source: Microsoft-Windows-CAPI2 Date: 18/03/2013 09:48:40 Event ID: 4107 Task Category: None Level: Error Keywords: Classic User: N/A Computer: ServerName Description: Failed extract of third-party root list from auto update cab at: <http://ctldl.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootstl.cab> with error: The data is invalid. . Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-CAPI2" Guid="{5bbca4a8-b209-48dc-a8c7-b23d3e5216fb}" EventSourceName="Microsoft-Windows-CAPI2" /> <EventID Qualifiers="0">4107</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8080000000000000</Keywords> <TimeCreated SystemTime="2013-03-18T09:48:40.169581600Z" /> <EventRecordID>8713</EventRecordID> <Correlation /> <Execution ProcessID="412" ThreadID="5288" /> <Channel>Application</Channel> <Computer>ServerName <Security /> </System> <EventData> <Data>http://ctldl.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootstl.cab</Data> <Data>The data is invalid. </Data> </EventData> </Event>

  Read the article

• Intermittent Windows Server 2008 BSOD and restart

  - by Timka

  Our EC2 Instance (Windows Server 2008) crashed multiple times for the past 3 months (last time was today at 1:05 EST). Upon reviewing MEMORY.DMP file we noticed that possible cause of the crashes is rhelnet.sys (RedHat PV NIC Driver). Server's Event Viewer has the following records right after the crash: Critical - Kernel Power: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. BugCheck: The computer has rebooted from a bugcheck. The bugcheck was: 0x000000d1 (0x000000000000002d, 0x0000000000000002, 0x0000000000000000, 0xfffff88001402d14). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 100113-35849-01. Could this be a hardware issue? Would it help if we stop and start the instance? Or is this more likely that this is caused by the software running on the system? [Update 10.01.2013] Amazon Rep suggested to update RH drivers to Citrix PV drivers on our instance: Upgrading PV Drivers [Update 10.08.2013] We performed a drivers upgrade on the cloned instance. Right after the upgrade we noticed the following errors in our Event viewer: Xennet6 errors in Event Viewer (Event ID# 5001) After digging a bit more I found this article suggesting to install the latest Citrix drivers. Unfortunately, this didn't help us at all and our cloned instance became unresponsive. [Update 10.08.2013 2] I recreated an instance and updated PV drivers again. After searching on Internet I found this article where Amazon Rep explains that: "Event ID 5001 from source Xennet6 cannot be found" message does not indicate anything wrong, just that the PV driver is looking for a feature that we have not implemented in our version of Xen. I will keep my test system running for a while to see if there any issues with it.

  Read the article

• Windows 2008, IIS7 and virtual directories

  - by Thomas

  I created a virtual directory called test (C:\test) under the Default Web Site and added two simple test files (one html and one aspx). I thought I had to add the IUSR and NetworkService (for application pools) to C:\test and grant the users appropriate rights in order for IIS7 to serve the content. It appears that is not the case at all as I can view any files in the virtual directory (even if I convert it to an application) without changing or adding any security settings on the C:\test folder. I just installed IIS7 with ASP.NET on Windows 2008 without changing any settings besides adding the virtual directory. Am I missing something? Even my book on IIS7 states that the user accounts should be added an appropriate rights should be added. I added the following to answer the comments: I am referencing the file using a public IP http://xxx.xxx.xxx.xxx/test/one.html and the IP nor localhost is in my trusted sites. I am not signed in on the server at all as I am accessing the content from my home machine and the content is on my production server. The following users/groups have access to c:\test on the server (Creator Owner, System, Administrators, Users) and the app pool is running under the default NetworkService account. I basically installed win2008, added the IIS role with asp.net. I then opened IIS7, added a virtual directory and copied two files to the directory to test. It works which is great but I want to understand why it works. How is it that IIS7 can access files in the C:\test folder without any permissions set.

  Read the article

• How to disable windows server 2008 timestamp response

  - by Cal

  Posted this question on stackoverflow but then got instructed to post it here: I was using Rapid7's Nexpose to scan one of our web servers (windows server 2008), and got a vulnerability for timestamp response. According to Rapid7, timestamp response shall be disabled: http://www.rapid7.com/db/vulnerabilities/generic-tcp-timestamp So far I have tried several things: Edit the registry, add a "Tcp1323Opts" key to HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters, and set it to 0. http://technet.microsoft.com/en-us/library/cc938205.aspx Use this command: netsh int tcp set global timestamps=disabled Tried powershell command: Set-netTCPsetting -SettingName InternetCustom -Timestamps disabled (got error: Set-netTCPsetting : The term 'Set-netTCPsetting' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again.) None of above attempts was successful, after re-scan we still got the same alert. Rapid7 suggested using a firewall that's capable of blocking it, but we want to know if there is a setting on windows to achieve it. Is it through a specific port? If yes, what is the port number? If not, could you suggest a 3rd party firewall that is capable of blocking it? Thank you very much.

  Read the article

• Windows 2008 Terminal Services "Easy Print" and Matrix Printers

  - by Cesar87

  Server: Windows 2008 Server Standard SP2 with "Terminal Services" role Clients: Windows XP SP3 + .NET 3.5 Framework SP1 + Remote Desktop Client 7.0 We are using "Easy Print" feature which allows programs running on server to "see" printers installed on client machines. Everything works fine, EXCEPT when we send a text-only output to a dot-matrix printer. In this case, the printer only outputs a blank page. At first, we had problems with the error "Windows Presentation Foundation Terminal Server Print W has encountered a problem and needs to close." but this was fixed by replacing TsWpfWrp.exe with the one from Vista SP1 as suggested here. But now, we only get a blank page! Every other (graphical) document we sent to printer works 100%. We also tried to use the "Generic text-only" driver, but the result is same. Now we are trying to change parameters like print processor on "advanced" tab from printer driver to see if something happen. But this is just guessing and we really don't know what to try anymore. The problem appears to be on Easy Print driver, but we found almost no resources about it. Any tips are welcome.

  Read the article

• BSOD Dump - EXCEPTION_DOUBLE_FAULT - ON Windows 2008 Server 64bit

  - by Mark K

  Hello, my windows 2008 server (datacenter ed) 64bit , have recently created a series of BSOD on a different applications. the error message is in general EXCEPTION_DOUBLE_FAULT. Can anyone please help with the analysis of the dump file bellow- Best regards, Mark 2: kd !analyze -v * Bugcheck Analysis * * UNEXPECTED_KERNEL_MODE_TRAP (7f) This means a trap occurred in kernel mode, and it's a trap of a kind that the kernel isn't allowed to have/catch (bound trap) or that is always instant death (double fault). The first number in the bugcheck params is the number of the trap (8 = double fault, etc) Consult an Intel x86 family manual to learn more about what these traps are. Here is a portion of those codes: If kv shows a taskGate use .tss on the part before the colon, then kv. Else if kv shows a trapframe use .trap on that value Else .trap on the appropriate frame will show where the trap was taken (on x86, this will be the ebp that goes with the procedure KiTrap) Endif kb will then show the corrected stack. Arguments: Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT Arg2: 0000000080050033 Arg3: 00000000000006f8 Arg4: fffff800018b1678 Debugging Details: BUGCHECK_STR: 0x7f_8 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: DRIVER_FAULT_SERVER_MINIDUMP PROCESS_NAME: CustomerService. CURRENT_IRQL: 1 EXCEPTION_RECORD: fffffa6004e45568 -- (.exr 0xfffffa6004e45568) ExceptionAddress: fffff800018a0150 (nt!RtlVirtualUnwind+0x0000000000000250) ExceptionCode: 10000004 ExceptionFlags: 00000000 NumberParameters: 2 Parameter[0]: 0000000000000000 Parameter[1]: 00000000000000d8 TRAP_FRAME: fffffa6004e45610 -- (.trap 0xfffffa6004e45610) NOTE: The trap frame does not contain all registers. Some register values may be zeroed or incorrect. rax=0000000000000050 rbx=0000000000000000 rcx=0000000000000004 rdx=00000000000000d8 rsi=0000000000000000 rdi=0000000000000000 rip=fffff800018a0150 rsp=fffffa6004e457a0 rbp=fffffa6004e459e0 r8=0000000000000006 r9=fffff8000181e000 r10=ffffffffffffff88 r11=fffff80001a1c000 r12=0000000000000000 r13=0000000000000000 r14=0000000000000000 r15=0000000000000000 iopl=0 nv up ei pl zr na po nc nt!RtlVirtualUnwind+0x250: fffff800018a0150 488b02 mov rax,qword ptr [rdx] ds:00000000000000d8=???????????????? Resetting default scope LAST_CONTROL_TRANSFER: from fffff800018781ee to fffff80001878450 STACK_TEXT: fffffa6001768a68 fffff800018781ee : 000000000000007f 0000000000000008 0000000080050033 00000000000006f8 : nt!KeBugCheckEx fffffa6001768a70 fffff80001876a38 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!KiBugCheckDispatch+0x6e fffffa6001768bb0 fffff800018b1678 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!KiDoubleFaultAbort+0xb8 fffffa6004e44e30 fffff800018782a9 : fffffa6004e45568 0000000000000001 fffffa6004e45610 000000000000023b : nt!KiDispatchException+0x34 fffffa6004e45430 fffff800018770a5 : 0000000000000000 0000000000000000 0000000000000000 0000000000000001 : nt!KiExceptionDispatch+0xa9 fffffa6004e45610 fffff800018a0150 : fffffa6004e46638 fffffa6004e46010 fffff80001965190 fffff8000181e000 : nt!KiPageFault+0x1e5 fffffa6004e457a0 fffff800018a3f78 : fffffa6000000001 0000000000000000 0000000000000000 ffffffffffffff88 : nt!RtlVirtualUnwind+0x250 fffffa6004e45810 fffff800018b1706 : fffffa6004e46638 fffffa6004e46010 fffffa6000000000 0000000000000000 : nt!RtlDispatchException+0x118 fffffa6004e45f00 0000000000000000 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!KiDispatchException+0xc2 STACK_COMMAND: kb FOLLOWUP_IP: nt!KiDoubleFaultAbort+b8 fffff800`01876a38 90 nop SYMBOL_STACK_INDEX: 2 SYMBOL_NAME: nt!KiDoubleFaultAbort+b8 FOLLOWUP_NAME: MachineOwner MODULE_NAME: nt IMAGE_NAME: ntkrnlmp.exe DEBUG_FLR_IMAGE_TIMESTAMP: 4a7801eb FAILURE_BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b8 BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b8 Followup: MachineOwner

  Read the article

• SCVMM 2008 R2 problems migrating VM from VS2005 to Hyper-V host

  - by Scott Ivey

  I have System Center Virtual Machine Manager 2008 R2 installed, and have a Hyper-V R2 host and a Virtual Server 2005 host. I'm trying to migrate my machines from the VS2005 host to the Hyper-V host, and keep getting the following error... VMM is unable to complete the requested file transfer. The connection to the HTTP server myserver.mydomain.local could not be established. (Unknown error (0x80072efd)) Recommended Action Ensure that the HTTP service and/or the agent on the machine myserver.mydomain.local are installed and running and that a firewall is not blocking HTTPS traffic. (Note - migrations between Hyper-V hosts managed by the VMM server work fine - my problem is just going from VS2005-Hyper-V hosts) I have no firewalls turned on on either of the servers, and no firewalls in the middle. I've looked all over for answers to this problem, and am getting nowhere. All the articles I find when searching are talking about either V2V or P2V - and i'm just trying to do a straight migrate VM. I've tried rebooting the boxes, changing the BITS SSL port number, restarting services, triple-checking firewalls, etc. Does anyone have any good suggestions as to how I can resolve this problem?

  Read the article

• Weird "missing" CD/DVD driver during Windows Server 2008 installation

  - by Django Reinhardt

  Hi. We have an old PowerEdge 860 that we're trying to install Windows Server 2008 R2 onto. At present the machine doesn't have any OS installed, so we're doing a clean install from a DVD. Pretty simple stuff. The problem is that, although the installation process starts off well (asking for language and locale settings), as soon as we click "Install Now" we're told "A required CD/DVD device driver is missing." The operating system has already booted from our only DVD drive(!). I've seen other people complain about this problem (usually in relation to installing Vista or Windows 7) but I've not found a 100% solution yet. (Our DVD drive is a Hitachi LG GWA-4400N, salvaged from an old laptop. There have never been any drivers released for this device, nor any firmware updates.) The most promising lead I have is from someone claiming that Windows is actually asking for a driver for the ATAPI/IDE Controller here. UPDATE See my answer below... It was most likely a corrupt download. (*shame*) I will update this question when I know for sure.

  Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >