Search Results

Search found 70103 results on 2805 pages for 'windows easy transfer'.

Page 50/2805 | < Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >

• Restore Your PC from Windows Home Server

  - by Mysticgeek

  If your computer crashes or you get a virus infection that makes it unrecoverable, doing a clean install can be a hassle, let alone getting your data back. If you’re backing up your computers to Windows Home Server, you can completely restore them to the last successful backup. Note: For this process to work you need to verify the PC you want to restore is connected to your network via Ethernet. If you have it connected wirelessly it won’t work. Restore a PC from Windows Home Server On the computer you want to restore, pop in the Windows Home Server Home Computer Restore disc and boot from it. If you don’t have one already made, you can easily make one following these instructions. We have also included the link to the restore disc below. Boot from the CD then select if your machine has 512MB or RAM or more. The disc will initialize… Then choose your language and keyboard settings. Hopefully if everything goes correctly, your network card will be detected and you can continue. However, if it doesn’t like in our example, click on the Show Details button. In the Detect Hardware screen click on the Install Drivers button. Now you will need to have a USB flash drive with the correct drivers on it. It has to be a flash drive or a floppy (if you happen to still have one of those) because you can’t take out the Restore CD. If you want to make sure you have the correct drivers on the USB flash drive, open the Windows Home Server Console on another computer on your network. In the Computers and Backup section right-click on the computer you want to restore and select View Backups. Select the backup you want to restore from and click the Open button in the Restore or view Files section. Now drag the entire contents of the folder named Windows Home Server Drivers for Restore to the USB flash drive. Back to the machine you’re trying to restore, insert the USB flash drive with the correct drivers and click the Scan button. Wait a few moments while the drivers are found then click Ok then Continue.   The Restore Computer Wizard starts up… Enter in your home server password and click Next. Select the computer you want to restore. If it isn’t selected by default you can pull it up from the dropdown list under Another Computer. Make certain you’re selecting the correct machine. Now select the backup you want to restore. In this example we only have one but chances are you’ll have several. If you have several backups to choose from, you might want to check out the details for them. Now you can select the disk from backup and and restore it to the destination volume. You might need to initialize a disk, change a drive letter, or other disk management tasks, if so, then click on Run Disk Manger. For example we want to change the destination drive letter to (C:).   After you’ve made all the changes to the destination disk you can continue with the restore process. If everything looks correct, confirm the restore configuration. If you need to make any changes at this point, you can still go back and make them. Now Windows Home Server will restore your drive. The amount of time it takes will vary depend on the amount of data you have to restore, network connection speed, and hardware. You are notified when the restore successfully completes. Click Finish and the PC will reboot and be restored and should be working correctly. All the updates, programs, and files will be back that were saved to the last successful backup. Anything you might have installed after that backup will be gone. If you have your computers set to backup every night, then hopefully it won’t be a big issue.   Conclusion Backing up the computers on your network to Windows Home Server is a valuable tool in your backup strategy. Sometimes you may only need to restore a couple files and we’ve covered how to restore them from backups on WHS and that works really well. If the unthinkable happens and you need to restore the entire computer, WHS makes that easy too.  Download Windows Home Server Home Computer Restore CD Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerCreate A Windows Home Server Home Computer Restore DiscGMedia Blog: Setting Up a Windows Home ServerShare Ubuntu Home Directories using SambaInstalling Windows Home Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier Design Your Web Pages Using the Golden Ratio Worldwide Growth of the Internet How to Find Your Mac Address Use My TextTools to Edit and Organize Text

  Read the article

• Silverlight for Windows Embedded Tutorial (step 5 and a bit of Windows Phone 7)

  - by Valter Minute

  If you haven’t spent the last week in the middle of the Sahara desert or traveling on a sled in the north pole area you should have heard something about the launch of Windows Phone 7 Series (or Windows Phone Series 7, or Windows Series Phone 7 or something like that). Even if you are in the middle of the desert or somewhere around the north pole you may have been reached by the news, since it seems that WP7S (using the full name will kill my available bandwidth!) is generating a lot of buzz in the development and IT communities. One of the most important aspects of this new platform is that it will be programmed using a new set of tools and frameworks, completely different from the ones used on older releases of Windows Mobile (or SmartPhone, or PocketPC or whatever…). WP7S applications can be developed using Silverlight or XNA. If you want to learn something more about WP7S development you can download the preview of Charles Petzold’s book about it: http://www.charlespetzold.com/phone/index.html Charles Petzold is also the author of “Programming Windows”, the first book I ever read about programming on Windows (it was Windows 3.0 at that time!). The fact that even I was able to learn how to develop Windows application is a proof of the quality of Petzold’s work. This book is up to his standards and the 150pages preview is already rich in technical contents without being boring or complicated to understand. I may be able to become a Windows Phone developer thanks to mr. Petzold. Mr. Petzold uses some nice samples to introduce the basic concepts of Silverlight development on WP7S. On this new platform you’ll use managed code to develop your application, so those samples can’t be ported on Windows CE R3 as they are, but I would like to take one of the first samples (called “SilverlightTapHello1”) and adapt it to Silverlight for Windows Embedded to show that even plain old native code can be used to develop “cool” user interfaces! The sample shows the standard WP7S title header and a textbox with an hello world message inside it. When the user touches the textbox, it will change its color. When the user touches the background (Grid) behind it, its default color (plain old White) will be restored. Let’s see how we can implement the same features on our embedded device! I took the XAML code of the sample (you can download the book samples here: http://download.microsoft.com/download/1/D/B/1DB49641-3956-41F1-BAFA-A021673C709E/CodeSamples_DRAFTPreview_ProgrammingWindowsPhone7Series.zip) and changed it a little bit to remove references to WP7S or managed runtime. If you compare the resulting files you will see that I was able to keep all the resources inside the App.xaml files and the structure of  MainPage.XAML almost intact. This is the Silverlight for Windows Embedded version of MainPage.XAML: <UserControl x:Class="SilverlightTapHello1.MainPage" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:phoneNavigation="clr-namespace:Microsoft.Phone.Controls;assembly=Microsoft.Phone.Controls.Navigation" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" d:DesignWidth="480" d:DesignHeight="800" FontFamily="{StaticResource PhoneFontFamilyNormal}" FontSize="{StaticResource PhoneFontSizeNormal}" Foreground="{StaticResource PhoneForegroundBrush}" Width="640" Height="480">   <Grid x:Name="LayoutRoot" Background="{StaticResource PhoneBackgroundBrush}"> <Grid.RowDefinitions> <RowDefinition Height="Auto"/> <RowDefinition Height="*"/> </Grid.RowDefinitions>   <!--TitleGrid is the name of the application and page title--> <Grid x:Name="TitleGrid" Grid.Row="0"> <TextBlock Text="SILVERLIGHT TAP HELLO #1" x:Name="textBlockPageTitle" Style="{StaticResource PhoneTextPageTitle1Style}"/> <TextBlock Text="main page" x:Name="textBlockListTitle" Style="{StaticResource PhoneTextPageTitle2Style}"/> </Grid>   <!--ContentGrid is empty. Place new content here--> <Grid x:Name="ContentGrid" Grid.Row="1" MouseLeftButtonDown="ContentGrid_MouseButtonDown" Background="{StaticResource PhoneBackgroundBrush}"> <TextBlock x:Name="TextBlock" Text="Hello, Silverlight for Windows Embedded!" HorizontalAlignment="Center" VerticalAlignment="Center" /> </Grid> </Grid> </UserControl> If you compare it to the WP7S sample (not reported here to avoid any copyright issue) you’ll notice that I had to replace the original phoneNavigation:PhoneApplicationPage with UserControl as the root node. This make sense because there is not support for phone applications on CE 6. I also had to specify width and height of my main page (on the WP7S device this will be adjusted by the OS) and I had to replace the multi-touch event handler with the MouseLeftButtonDown event (no multitouch support for Windows CE R3, still). I also changed the hello message, of course. I used XAML2CPP to generate the boring part of our application and then added the initialization code to WinMain: int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPTSTR lpCmdLine, int nCmdShow) { if (!XamlRuntimeInitialize()) return -1;   HRESULT retcode;   IXRApplicationPtr app; if (FAILED(retcode=GetXRApplicationInstance(&app))) return -1; XRXamlSource dictsrc;   dictsrc.SetResource(hInstance,TEXT("XAML"),IDR_XAML_App);   if (FAILED(retcode=app->LoadResourceDictionary(&dictsrc,NULL))) return -1;   MainPage page;   if (FAILED(page.Init(hInstance,app))) return -1;   UINT exitcode;   if (FAILED(page.GetVisualHost()->StartDialog(&exitcode))) return -1;   return exitcode; }   You may have noticed that there is something different from the previous samples. I added the code to load a resource dictionary. Resources are an important feature of XAML that allows you to define some values that could be replaced inside any XAML file loaded by the runtime. You can use resources to define custom styles for your fonts, backgrounds, controls etc. and to support internationalization, by providing different strings for different languages. The rest of our WinMain isn’t that different. It creates an instances of our MainPage object and displays it. The MainPage class implements an event handler for the MouseLeftButtonDown event of the ContentGrid: class MainPage : public TMainPage<MainPage> { public:   HRESULT ContentGrid_MouseButtonDown(IXRDependencyObject* source,XRMouseButtonEventArgs* args) { HRESULT retcode; IXRSolidColorBrushPtr brush; IXRApplicationPtr app;   if (FAILED(retcode=GetXRApplicationInstance(&app))) return retcode;   if (FAILED(retcode=app->CreateObject(IID_IXRSolidColorBrush,&brush))) return retcode;   COLORREF color=RGBA(0xff,0xff,0xff,0xff);   if (args->pOriginalSource==TextBlock) color=RGBA(rand()&0xFF,rand()&0xFF,rand()&0xFF,0xFF);   if (FAILED(retcode=brush->SetColor(color))) return retcode;   if (FAILED(retcode=TextBlock->SetForeground(brush))) return retcode; return S_OK; } }; As you can see this event is generated when a used clicks inside the grid or inside one of the objects it contains. Since our TextBlock is inside the grid, we don’t need to provide an event handler for its MouseLeftButtonDown event. We can just use the pOriginalSource member of the event arguments to check if the event was generated inside the textblock. If the event was generated inside the grid we create a white brush,if it’s inside the textblock we create some randomly colored brush. Notice that we need to use the RGBA macro to create colors, specifying also a transparency value for them. If we use the RGB macro the resulting color will have its Alpha channel set to zero and will be transparent. Using the SetForeground method we can change the color of our control. You can compare this to the managed code that you can find at page 40-41 of Petzold’s preview book and you’ll see that the native version isn’t much more complex than the managed one. As usual you can download the full code of the sample here: http://cid-9b7b0aefe3514dc5.skydrive.live.com/self.aspx/.Public/SilverlightTapHello1.zip And remember to pre-order Charles Petzold’s “Programming Windows Phone 7 series”, I bet it will be a best-seller! Technorati Tags: Silverlight for Windows Embedded,Windows CE

  Read the article

• Management and Monitoring Tools for Windows Azure

  - by BuckWoody

  With such a large platform, Windows Azure has a lot of moving parts. We’ve done our best to keep the interface as simple as possible, while giving you the most control and visibility we can. However, as with most Microsoft products, there are multiple ways to do something – and I’ve always found that to be a good strength. Depending on the situation, I might want a graphical interface, a command-line interface, or just an API so I can incorporate the management into my own tools, or have third-party companies write other tools. While by no means exhaustive, I thought I might put together a quick list of a few tools you can use to manage and monitor Windows Azure components, from our IaaS, SaaS and PaaS offerings. Some of the products focus on one area more than another, but all are available today. I’ll try and maintain this list to keep it current, but make sure you check the date of this post’s update – if it’s more than six months old, it’s most likely out of date. Things move fast in the cloud. The Windows Azure Management Portal The primary tool for managing Windows Azure is our portal – most everything you need is there, from creating new services to querying a database. There are two versions as of this writing – a Silverlight client version, and a newer HTML5 version. The latter is being updated constantly to be in parity with the Silverlight client. There’s a balance in this portal between simplicity and power – we’re following the “less is more” approach, with increasing levels of detail as you work through the portal rather than overwhelming you with a single, long “more is more” page. You can find the Portal here: http://windowsazure.com (then click “Log In” and then “Portal”) Windows Azure Management API You can also use programming tools to either write your own interface, or simply provide management functions directly within your solution. You have two options – you can use the more universal REST API’s, which area bit more complex but work with any system that can write to them, or the more approachable .NET API calls in code. You can find the reference for the API’s here: http://msdn.microsoft.com/en-us/library/windowsazure/ee460799.aspx  All Class Libraries, for each part of Windows Azure: http://msdn.microsoft.com/en-us/library/ee393295.aspx  PowerShell Command-lets PowerShell is one of the most powerful scripting languages I’ve used with Windows – and it’s baked into all of our products. When you need to work with multiple servers, scripting is really the only way to go, and the Windows Azure PowerShell Command-Lets allow you to work across most any part of the platform – and can even be used within the services themselves. You can do everything with them from creating a new IaaS, PaaS or SaaS service, to controlling them and even working with security and more. You can find more about the Command-Lets here: http://wappowershell.codeplex.com/documentation (older link, still works, will point you to the new ones as well) We have command-line utilities for other operating systems as well: https://www.windowsazure.com/en-us/manage/downloads/  Video walkthrough of using the Command-Lets: http://channel9.msdn.com/Events/BUILD/BUILD2011/SAC-859T  System Center System Center is actually a suite of graphical tools you can use to manage, deploy, control, monitor and tune software from Microsoft and even other platforms. This will be the primary tool we’ll recommend for managing a hybrid or contiguous management process – and as time goes on you’ll see more and more features put into System Center for the entire Windows Azure suite of products. You can find the Management Pack and README for it here: http://www.microsoft.com/en-us/download/details.aspx?id=11324  SQL Server Management Studio / Data Tools / Visual Studio SQL Server has two built-in management and development, and since Version 2008 R2, you can use them to manage Windows Azure Databases. Visual Studio also lets you connect to and manage portions of Windows Azure as well as Windows Azure Databases. You can read more about Visual Studio here: http://msdn.microsoft.com/en-us/library/windowsazure/ee405484  You can read more about the SQL tools here: http://msdn.microsoft.com/en-us/library/windowsazure/ee621784.aspx  Vendor-Provided Tools Microsoft does not suggest or endorse a specific third-party product. We do, however, use them, and see lots of other customers use them. You can browse to these sites to learn more, and chat with their folks directly on how they support Windows Azure. Cerebrata: Tools for managing from the command-line, graphical diagnostics, graphical storage management - http://www.cerebrata.com/  Quest Cloud Tools: Monitoring, Storage Management, and costing tools - http://communities.quest.com/community/cloud-tools  Paraleap: Monitoring tool - http://www.paraleap.com/AzureWatch  Cloudgraphs: Monitoring too -  http://www.cloudgraphs.com/  Opstera: Monitoring for Windows Azure and a Scale-out pattern manager - http://www.opstera.com/products/Azureops/  Compuware: SaaS performance monitoring, load testing -  http://www.compuware.com/application-performance-management/gomez-apm-products.html  SOASTA: Penetration and Security Testing - http://www.soasta.com/cloudtest/enterprise/  LoadStorm: Load-testing tool - http://loadstorm.com/windows-azure  Open-Source Tools This is probably the most specific set of tools, and the list I’ll have to maintain most often. Smaller projects have a way of coming and going, so I’ll try and make sure this list is current. Windows Azure MMC: (I actually use this one a lot) http://wapmmc.codeplex.com/  Windows Azure Diagnostics Monitor: http://archive.msdn.microsoft.com/wazdmon  Azure Application Monitor: http://azuremonitor.codeplex.com/  Azure Web Log: http://www.xentrik.net/software/azure_web_log.html  Cloud Ninja:Multi-Tennant billing and performance monitor -  http://cnmb.codeplex.com/  Cloud Samurai: Multi-Tennant Management- http://cloudsamurai.codeplex.com/    If you have additions to this list, please post them as a comment and I’ll research and then add them. Thanks!

  Read the article

• Remote Debug Windows Azure Cloud Service

  - by Shaun

  Originally posted on: http://geekswithblogs.net/shaunxu/archive/2013/11/02/remote-debug-windows-azure-cloud-service.aspxOn the 22nd of October Microsoft Announced the new Windows Azure SDK 2.2. It introduced a lot of cool features but one of it shocked most, which is the remote debug support for Windows Azure Cloud Service (a.k.a. WACS).   Live Debug is Nightmare for Cloud Application When we are developing against public cloud, debug might be the most difficult task, especially after the application had been deployed. In order to minimize the debug effort, Microsoft provided local emulator for cloud service and storage once the Windows Azure platform was announced. By using local emulator developers could be able run their application on local machine with almost the same behavior as running on Windows Azure, and that could be debug easily and quickly. But when we deployed our application to Azure, we have to use log, diagnostic monitor to debug, which is very low efficient. Visual Studio 2012 introduced a new feature named "anonymous remote debug" which allows any workstation under any user could be able to attach the remote process. This is less secure comparing the authenticated remote debug but much easier and simpler to use. Now in Windows Azure SDK 2.2, we could be able to attach our application from our local machine to Windows Azure, and it's very easy.   How to Use Remote Debugger First, let's create a new Windows Azure Cloud Project in Visual Studio and selected ASP.NET Web Role. Then create an ASP.NET WebForm application. Then right click on the cloud project and select "publish". In the publish dialog we need to make sure the application will be built in debug mode, since .NET assembly cannot be debugged in release mode. I enabled Remote Desktop as I will log into the virtual machine later in this post. It's NOT necessary for remote debug. And selected "advanced settings" tab, make sure we checked "Enable Remote Debugger for all roles". In WACS, a cloud service could be able to have one or more roles and each role could be able to have one or more instances. The remote debugger will be enabled for all roles and all instances if we checked. Currently there's no way for us to specify which role(s) and which instance(s) to enable. Finally click "publish" button. In the windows azure activity window in Visual Studio we can find some information about remote debugger. To attache remote process would be easy. Open the "server explorer" window in Visual Studio and expand "cloud services" node, find the cloud service, role and instance we had just published and wanted to debug, right click on the instance and select "attach debugger". Then after a while (it's based on how fast our Internet connect to Windows Azure Data Center) the Visual Studio will be switched to debug mode. Let's add a breakpoint in the default web page's form load function and refresh the page in browser to see what's happen. We can see that the our application was stopped at the breakpoint. The call stack, watch features are all available to use. Now let's hit F5 to continue the step, then back to the browser we will find the page was rendered successfully.   What Under the Hood Remote debugger is a WACS plugin. When we checked the "enable remote debugger" in the publish dialog, Visual Studio will add two cloud configuration settings in the CSCFG file. Since they were appended when deployment, we cannot find in our project's CSCFG file. But if we opened the publish package we could find as below. At the same time, Visual Studio will generate a certificate and included into the package for remote debugger. If we went to the azure management portal we will find there will a certificate under our application which was created, uploaded by remote debugger plugin. Since I enabled Remote Desktop there will be two certificates in the screenshot below. The other one is for remote debugger. When our application was deployed, windows azure system will open related ports for remote debugger. As below you can see there are two new ports opened on my application. Finally, in our WACS virtual machine, windows azure system will copy the remote debug component based on which version of Visual Studio we are using and start. Our application then can be debugged remotely through the visual studio remote debugger. Below is the task manager on the virtual machine of my WACS application.   Summary In this post I demonstrated one of the feature introduced in Windows Azure SDK 2.2, which is Remote Debugger. It allows us to attach our application from local machine to windows azure virtual machine once it had been deployed. Remote debugger is powerful and easy to use, but it brings more security risk. And since it's only available for debug build this means the performance will be worse than release build. Hence we should only use this feature for staging test and bug fix (publish our beta version to azure staging slot), rather than for production.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• How to Get Pro Features in Windows Home Versions with Third Party Tools

  - by Chris Hoffman

  Some of the most powerful Windows features are only available in Professional or Enterprise editions of Windows. However, you don’t have to upgrade to Windows Professional to use these powerful features – use these free alternatives instead. These features include the ability to access your desktop remotely, encrypt your hard drive, run Windows XP in a window, change advanced settings in group policy, use Windows Media Center, run an operating system off a USB stick, and more. How to Get Pro Features in Windows Home Versions with Third Party Tools HTG Explains: Is ReadyBoost Worth Using? HTG Explains: What The Windows Event Viewer Is and How You Can Use It

  Read the article

• Is there a Windows philosophy of programming?

  - by Maglob

  I've been programming both in Unix and Windows environments. Mostly I've worked in Unix, where I've learned Unix Philosophy, which can be summarized as Write programs that do one thing and do it well. Write programs to work together. Write programs to handle text streams, because that is a universal interface. There seems to be a clear difference in programming cultures between Unix and Windows worlds, for example: GUI vs CLI Registry vs config files Lots of tools specializing for any given need vs group of generic orthogonal tools which can combined Is there equivalent of "Unix philosophy" in Windows world? What Unix-programmer can learn from Windows or should be aware of when moving to programming in Windows? I would like answers to focus on the best practices of Windows programming (and not a fight between Windows and Unix).

  Read the article

• How To Play DVDs on Windows 8

  - by Chris Hoffman

  Upgrade to Windows 8 and you may be surprised to find that you can no longer play video DVDs. Unlike previous versions of Windows, Windows 8 doesn’t include built-in support for playing DVDs. Microsoft opted not to include DVD support because so many new computers – especially tablets and ultrabooks – aren’t coming with DVD drives. Microsoft pays a licensing fee for each copy of Windows that ships with DVD support. Note: You can still use data DVDs with Windows 8. This only applies to video DVDs. 6 Start Menu Replacements for Windows 8 What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8

  Read the article

• Windows RT Secured Only By Microsoft

  That disconcerting news is what Mark Hachman is reporting for Read Write Web. One can more or less safely assume that Microsoft will come up with its own antivirus software for Windows RT. Still, this is a rather unusual state of affairs; why is the company doing this? Hachman explains that apps for the Windows RT operating system can run just fine on Windows 8, but the reverse is not true, unless the Windows 8 app has been specially compiled to run on both Windows 8 and Windows RT. The difference apparently stems from the processors for which the two systems have been optimized. Windows 8 ru...

  Read the article

• Dual Booting Windows 8 and Ubuntu 12.10 - thinkpad x230

  - by user110703

  I am having problems getting grub to load Windows 8 properly after installing Ubuntu 12.10 and Windows 8 on a solid state drive. Here's what I did: Fresh install of Windows 8 using USB recovery drive (partitioned SSD for UEFI) -- Tested windows install and it worked fine Built bootable USB with Ubuntu 12.10 64bit and installed Ubuntu -- Used Ubuntu's installer to partition the Windows 8 partition and install there Reboot - try to load windows 8 from grub -- Ubuntu loads correctly; windows load reports various problems with permissions and not being able to find files - I'll update what the actual errors are Tried to fix the boot problem using boot-repair: -- here's the output: http://paste.ubuntu.com/1384522/ So, this is my first time trying to setup a dual boot system and I think that UEFI is the main culprit in getting this to work correctly. What do I need to

  Read the article

• HTG Explains: What Is Windows RT and What Does It Mean To Me?

  - by Chris Hoffman

  Windows RT is a special edition of Windows 8. It runs on ARM and you’ll find it alongside Intel x86 machines in stores, but you’ll be surprised just how much Windows RT differs from the Windows you know. Windows RT is so different  that Microsoft has told Mozilla Windows RT “isn’t Windows anymore.” If you’re looking to buy a Windows system in stores, you should know the difference between Windows RT and the other editions of Windows 8. Image Credit: Kiwi Flickr HTG Explains: What Is Windows RT and What Does It Mean To Me? HTG Explains: How Windows 8′s Secure Boot Feature Works & What It Means for Linux Hack Your Kindle for Easy Font Customization

  Read the article

• Windows Error After Wubi Install

  - by user106563

  The initial install on my laptop was Windows 7. I installed Wubi on Sunday - the install seemed fine. I was able to log in and use both Ubuntu and Windows. On Monday I started receiving the following error in Windows: windows cannot access the specified device path or file This occurs on every link I click on - essentially rendering Windows unusable. I do not experience the same problem when Windows is started up in safe mode. I have tried numerous virus scans (Malware bytes, Avg, AdAware) and have removed various trojans etc. Windows is still unusable. Ubuntu seems fine so far. My question is, can this error be attributed to the Wubi install?

  Read the article

• Wubi on Windows 8 without secure boot?

  - by emersonhsieh

  I have a MacBook Pro. I've heard rumours that if Windows 8 is going to have this thing called "Secure boot", Wubi cannot work. At first I plan to install Ubuntu on my mac via Wubi(and windows via bootcamp), but since I can't find my Windows 7 Installation CD, I installed Windows 8 on my Mac and installed Ubuntu on a VM. Then suddenly Windows 8 Release Preview was released today so I decided to install over my existing copy of Windows 8 Consumer Preview. When I went to the Windows 8 Upgrade assistant, it said that the firmware on my Mac doesn't support Secure booting. I don't even know what it means, but since the Upgrade assistant said that the Mac cannot support secure booting, can I install Wubi successfully? And what is secure booting anyways? Any help will be appreciated.

  Read the article

• Truecrypted Windows 7 missing in Grub2 after upgrade

  - by user287545

  I have an encrypted dual boot Windows 7/Ubuntu System and upgraded my Ubuntu today. Everything went smooth but my Windows is not shown in the Grub2-List anymore. Starting up I have the Truecrypt Bootloader and after entering the Password I get to Grub (now Grub2). There my Windows 7 entry is missing now. Here is my report: http://paste.ubuntu.com/7569182/ Updating Grub did nothing to it. My guess is that within Ubuntu it does not recognize my Windows Installation on sda1 anymore. I can't mount it aswell. I can only mount it via Truecrypt itself. I think I might have to manually insert the menu item for Windows into that Grub config file. I guess that after entering the password in the truecrypt bootloader it would be possible to start Windows if the item was there - just a guess though. Edit: I basically followed these steps to set up my system: Dual Booting Windows 7 with Ubuntu 12.04LTS with Truecrypt

  Read the article

• two windows loader in grub

  - by Lorenzo

  i'm facing a strange problem about which - googling- i didn't find any solution. This is the issue. I've restored windows 7 trught its hidden partition then i installed kubuntu 12.04 which didn't installed the grub loader. Hence via the same usb-live i used boot-repair which have found all the system that are: kubuntu + its recovery mode windows 7 /dev/sda1 windows 7 /dev/sda2 windows 7 recovery I don't know why i have got 2 windows loader, but they seem (to me) to load the same system. I tryied to see what is there written in the grub.cfg and it seems that the "root" directory for the two system is different eventhought when i load from sda1 i got "Avvio windows" (italian laguange that i choosed) and on sda2 i got "start windows" in the english language when the splash screen load. Can you PLEASE help me removing one of the two entry? i can not really see them, i want only one but i don't know how to act.. Thank you very much indeed. Lorenzo

  Read the article

• How to enable Start Button in Windows 8?

  - by Gopinath

  Microsoft taken a bold move in removing Start button in Windows 8 operating system and replacing it with Metro styled Start screen. Since the early days of Microsoft Windows, all the PC users are used to Start button and missing it all of sudden in Windows 8 may disappointed many. If you are one among the users who is disappointed with missing Windows 8 button, here is a quick way to enable it back To restore Start menu in Windows 8 all you have to do is to download and install ViStart application. This freeware application magically brings back the missing Start orbit and also when you press Windows Key, it opens up the Start menu instead of switching to Windows 8 Start Screen. Note: While installation the application may ask you to install toolbars and third party application, I suggest you to uncheck them as they may change your search settings and default browser.  They may not be harmful but effects your browsing experience.

  Read the article

• Microsoft Offers Cheap Windows 8 Upgrade

  Though the software giant hasn't answered all of the questions, Computerworld collected many of them in one place and included the answers. You can also visit Microsoft's blog post for the details. Starting at general availability, if your PC is running Windows XP, Windows Vista, or Windows 7 you will qualify to download an upgrade to Windows 8 Pro for just $39.99 in 131 markets. And if you want, you can add Windows Media Center for free through the 'add features' option within Windows 8 Pro after your upgrade, the Microsoft blog post helpfully states. If you choose to upgrade, the Windows 8...

  Read the article

• Windows explorer locks files

  - by John Prince

  I'm using Office 2010 & Windows 7 Home Premium 64-bit. My problem starts when I attempt to save e-mail messages to my PC that I have received via Outlook (my ISP is Comcast). I'm using the default .msg file extension option when I attempt to save these e-mails. The resultant files are locked and do not show the normal "envelope" icon. Instead, it’s a “blank page” icon with the right upper corner folded in. These files refuse to open either by double clicking on them or right clicking and trying to open them with Outlook. And when I return to Outlook, I discover that Outlook is now hung up and I have to close it via the Task Manager. To make matters worse, I’ve also discovered that every e-mail message that I've saved on my PC over the years has also somehow become locked and their original "envelope" icon has been replaced with the "blank page" icon. I found and installed an application called LockHunter. As a result, when I right click on a saved and locked e-mail message, I’ve given an option to find out what's locking it. Each time I'm told that the culprit is Windows explorer.exe. When I unlock the file the normal envelope icon is sometimes displayed (but not always) but at least the file can then be opened. But the file is still “squirrely” as it can’t be moved or saved to a folder until it’s unlocked again. On this second attempt, LockHunter says it’s now locked by Outlook.exe. By the way, I don't have this issue when I save Word, Excel & PowerPoint files; only with Outlook. I've exhausted every remedy that I can think of including: making sure that the file and folder options are checked to always show icons and not thumbnails; running the Windows 7 & Office 2010 repair options which find nothing amiss; running a complete system scan with Windows Malicious Software Removal Tool with negative results; verifying that Outlook is the default for opening e-mails; updating all of my applications via Secunia Personal Software Inspector; uninstalling every application that I felt was unnecessary; doing a registry cleanup via CC Cleaner; having Windows Security Essentials always on (it did find one Java Trojan recently which was quarantined and then deleted); uninstalling a bunch of non-Microsoft shell extensions; and deactivating all of the Outlook Add-ins and then re-activating each one. None of this solves the problem. I’d welcome any advice on how to resolve this.

  Read the article

• Surface RT: To Be Or Not To Be (Part 1)

  - by smehaffie

  So the Surface RT has been out for 9 months and Microsoft just declared a $900 million dollar write-down. So how did this happen and what does it mean for Microsoft’s efforts to break into the tablet market? I have been thinking a lot about most of the information below since the Surface product line was released. If you are looking for a “Microsoft Is Dead” story, then don’t read any further. But if you want an honest look at what I think led Microsoft to this point and what I think can be done to make Surface RT devices better, then please continue reading. What Led Microsoft To The $900 Million Write-Down Surface Unveiling:Microsoft totally missed the boat when they unveiled the Surface product line on June 18th, 2012. Microsoft should’ve been ready to post the specifications of both devices that night. Microsoft should’ve had a site up and running right after the event so people could pre-order the devices. This would have given them a good idea what the interest was in each device.  They could also have used this data to make a better estimate for the number of units to to have available for the launch and beyond.  They also lost out on taking advantage of the excitement generated by the Surface RT and Surface Pro announcement. They could have thrown in a free touch keyboard to anyone who pre-ordered. The advertising should have started right after the announcement and gotten bigger as launch day approached. Push for as many pre-order as possible and build excitement for the launch. Actual Launch (Surface RT): By this time all excitement was gone from the initial announcement, except for the Micorsoft faithful. Microsoft should have been ready to sell the Surface in as many markets as possible at launch. The limited market release was a real letdown for a lot of people.  A limited release right after the initial announce is understandable, but not at the official launch of the product. Microsoft overpriced the device and now they are lowering it to what it should have been to start with. The $349 price is within the range I suggested it should be at before pricing was announced. (Surface Tablets: The Price Must Be Right). Limited ordering options online was also a killer. User should have been able to buy the base unit of each device and then add on whatever keyboard they wanted to (this applies more to the Surface Pro).  There should have also been a place where users could order any additional add-ins that they wanted to buy (covers, extra power supplies, etc.) Marketing was better and the dancing “Click In” commercial was cool, but the ads comparing the iPad with Siri should have been on the air from day one of the announcement (or at least the launch).  Consumers want to know why you tablet is better, not just that is has a clickable keyboard and built-in kickstand. They could have also compared it to some of the other mid-range tablets if they had not overprices it to begin with. Stock Applications (Mail, People, Calendar, Music, Video, Reader and IE): This is where Microsoft really blew it. They had all the time in the world to make these applications the best of breed and instead we got applications that seemed thrown together.  Some updates have made these application better, but they are all still lacking in features that should have been there from day one. This did not help to enhance a new users experience any. ** I will admit that the applications that were data driven were first class citizen’s and that makes it even more perplexing why MS could knock it out of the park with the Weather, Travel, Finance, Bing, etc.) and fail so miserably on the core applications users would use the most on a tablet. Desktop on Tablet: The desktop just is so out of place on the tablet  I understand it was needed for Office but think it would have been better to not have the desktop in Windows RT, but instead open up the Office applications in full screen mode, in a desktop shell (same goes for  IE11).That way the user wouldn’t realize they are leaving Metro and going to the desktop. The other option would have been to just not include Office on Windows RT devices. Instead they could have made awesome Widows Store Apps for Word, Excel, OneNote and PowerPoint. In addition, they could have made the stock Mail, People, and Calendar applications contain all the functions that Outlook gives desktop users. Having some of the settings in desktop mode and others under “Change PC Settings” made Windows RT seemed unfinished and rushed to market. What Can Be Done To Make Windows RT Based Tablets Better (At least in my opinion) Either eliminate the desktop all together from Windows RT or at least make the user experience better by hiding the fact the user is running Office/IE in the desktop. Personally I ‘d like them to totally get rid of it and just make awesome Windows Store Application version of Word, Excel PowerPoint & OneNote.  This might also make the OS smaller and give the user more available disk space. I doubt there will ever be a Windows Store App versions of Office, but I still think it is a good idea. Make is so users can easily direct their documents, picture, videos and music to their extra storage and can access these files from the standard libraries.  A user should not have to create a VM on their microSD card or create symbolic links to get this to work properly. Most consumers would not be able to do this. Then users get frustrated when they run out or room on their main storage because nothing is automatically save to their microSD card when saved to libraries.  This is a major bug that needs to be fixed, otherwise Microsoft’s selling point of having a microSD slot is worthless. Allows users to uninstall and re-install any of the Office product that come with the Surface. That way people can free up storage space by uninstalling the Office applications they do not need. Everyone’s needs are different, so make the options flexible. Don’t take up storage space for applications the user will not use. Make the Core applications the “Cream of the Crop” Windows App Store applications. The should set the bar for all other Store applications. Improve performance as much as possible, if it seems to be sluggish on a tablet consumer will not buy it. They need to price the next line of Surface product very aggressive to undercut not only iPad but also Android low end tablets (Nook, Kindle Fire, and Nexus, etc.) Give developers incentives to write quality applications for the devices. Don’t reward developers for cranking out cookie cutter, low quality applications. I’d even suggest Microsoft consider implementing some new store certification guideline to stop these type of applications being published. Allow users to easily move the recover disk “partition between their microSD card and main storage. My Predictions for the Surface RT and Windows RT I honestly think even with all the missteps MS has made since the announcement  about the Surface product line, that they are on the right path. I was excited the Surface tablets when they were announced, and I still am. The truth be told, Windows 8 on a tablet (aka: Windows RT) is better than both iOS and Android. My nephew who is an Apple fan boy told me after he saw and used Windows 8 (he got the beta running on his iPad), that Windows 8 kicked Apples butt as a tablet OS. So there is hope for all Windows RT based tablets. I agree with my nephew and that is why whenever anyone asks me about my Surface, I love showing it off and recommend it. The 6 keys to gaining market share in the tablet market are; Aggressive pricing by both Microsoft and their OEM’s Good quality devices put out by Microsoft and their OEM’s (there are some out there, but not enough) Marketing, Marketing, Marketing from both Microsoft and their OEM’s (Need more ads showing why windows based tablets are better than iPads and Android tablets) Getting Widows tablets in retails stores all over, and giving sales people incentive to sell them. Consumers like to try electronics out before they buy them, and most will listen to what the sales person suggest. Microsoft needs sales people in retail stores directing people to buy windows based tablets over iPads and Android tablets. I think the Microsoft Stores within Best Buy is a good start, but they also need to get prominent displays in Walmart, Target, etc.. Release a smaller form factor Surface, Hopefully the 8”-10” next generation Surface is not a rumor. Make “Surface” the brand name for all Microsoft tablets and hybrid devices that they come out with. They cannot change the name with each new release.  Make Surface synonymous with quality, the same way that iPad  is for Apple. Well, that is my 2 cents on the subject. Let me know your thoughts by leaving a comment below. Soon to follow will be my thought on the Surface Pro, so keep an eye out for it. var addthis_pub="smehaffie"; var addthis_options="email, print, digg, slashdot, delicious, twitter, live, myspace, facebook, google, stumbleupon, newsvine";

  Read the article

• Windows 7 intermittently drops wired internet/lan connection.

  - by CraigTP

  In a nutshell, my Windows 7 Ultimate PC intermittently drops it's internet connection. Why? Background: My PC is wired to my ADSL modem/router which is directly connected to the phone line. I also have wireless connectivity turned on within the router for a laptop to connect wirelessly. Every few hours or so, when using my PC, I find I cannot access the internet and pages will not load. Eventually, Windows7 will update the network icon in the task-tray to show the exclamation mark symbol on the network icon. Opening up the Network And Sharing Centre will show the red cross between the "Multiple Networks" and "The Internet". Here's a picture of the "Network And Sharing Centre" (grabbed when everything was working!) As you can see, I'm running Sun's VirtualBox on this machine and that creates a Network connection for itself. This doesn't seem to affect the intermittent dropping (i.e. the intermittent drops occur whether the VirtualBox connection is in use or not). When the connection does drop, I cannot access any internet pages, nor can I access the router's web admin page at http://192.168.1.1/, so I'm assuming I've lost all local LAN access too. It's definitely not the router (or the internet connection itself) as my laptop, using the wireless connection (and running Vista Home Premium) continues to be able to access the internet (and the router's web admin pages) just fine. Every time this happens, I can immediately restore all internet and LAN access by opening Network Adapter page, disabling the "Local Area Connection" and then re-enabling it. Give it a few seconds and everything is fine again. I assume this is because, beneath the GUI, it's effectively doing an "ipconfig /release" then "ipconfig /renew". Why does this happen in the first place, though? I've googled for this and seen quite a few other people (even on MSDN/Technet forums) experiencing the same or almost the same problem, but with no clear resolution. Suggestions of turning off IPv6 on the LAN adapter, and ensuring there's no power management "sleeping" the network adapter have been tried but do not cure the problem. There does not seem to be any particular sequence of events that cause it to happen either. I've had it go twice in 20 minutes when just randomly browsing the web with no other traffic, and I've also had it go once then not go again for 2-3 hours with the same sort of usage. Can anyone tell me why this is happening and how to make it stop? EDIT: Additional information based upon the answer provided so far: Firstly, I forgot the mention that this is Windows 7 64 bit if that makes any difference at all. I mentioned that I don't think the VirtualBox network adpater is causing this problem in any way, and I also have VirtualBox installed on two other machines, one running Vista Home Premium and the other running XP. Neither of these machine experience the same network connectivity issues as the Windows 7 machine. The IP assignment for the Windows 7 machine is the same both before and after the "drop". I have a DHCP server on the router issuing IP Addresses, however my Windows 7 machine uses a static address. Here's the output from "ipconfig": Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Within the system's event logs, the only event that relates to the connection dropping is a "DNS Client Event" and this is generated after the connection has dropped and is an event detailing that DNS information can't be found for whatever website I may be trying to access, just as the connection drops: Log Name: System Source: Microsoft-Windows-DNS-Client Event ID: 1014 Task Category: None Level: Warning Keywords: User: NETWORK SERVICE Description: Name resolution for the name weather.service.msn.com timed out after none of the configured DNS servers responded. The network adapter chipset is Realtek PCIe GBE Family Controller and I have confirmed that this is the correct chipset for the motherboard (Asus M4A77TD PRO), and in fact, Windows Update installed an updated driver for this on 12/Jan/2009. The details of the update say that it's a Realtek software update from December 2009. Incidentally, I was still having the same intermittent problems prior to this update. It seems to have made no difference at all. EDIT 2 (1 Feb 2010): In my quest to solve this problem, I have discovered some more interesting information. On another forum, someone suggested that I should try running Windows in "Safe Mode With Networking" and see if the problem continues to occur. This was a fantastic suggestion and I don't know why I didn't think of it sooner myself. So, I proceeded to run in Safe Mode with Networking for a number of hours, and amazingly, the "drops" didn't occur once. It was a positive discovery, however, due to the intermittent nature of the original problem, I wasn't completely convinced that the problem was cured. One thing I did note is that the fan on my GFX card was running alot louder than normal. This is due to the fact that I have an ASUS ENGTS250 graphics card (http://www.asus.com/product.aspx?P_ID=B6imcoax3MRY42f3) which had a known problem with a noisy fan until a BIOS update fixed the issue. (See the "Manufacturer Response" here: http://www.newegg.com/Product/Product.aspx?Item=N82E16814121334 for details). Well, running in safe mode had the fan running (incorrectly) at full speed (as it did before the BIOS update), but with an (apparently) stable network connection. Obviously some driver was not loaded for the GFX card when in Safe Mode so this got me thinking about the GFX card (since the very noisy fan was quite obvious when running in Safe Mode). I rebooted into normal mode, and found that Nvidia had a very up-to-date new driver for my GFX card (only about 1 week old), so I downloaded the appropriate driver and installed it. After installation and a reboot, I was able to use my PC for an entire day with NO NETWORK DROPS!!! This was on Saturday. However, on the Sunday, I also had my PC for pretty much the entire day and experienced 2 network drops. No other changes have been made to my PC in this time. So, the story seems to be that updating my graphics card drivers seems to have improved (if not completely fixed) the issue, however, I'm still searching for a proper fix for this problem. Hopefully, this information may help anyone who may have additional ideas as to why this problem is occuring in the first place. (And why does new GFX card drivers have anything to do with the network?) I appreciate everyone's feedback so far. However, I'll have to ask once more if anyone has any further ideas of how to fix this particular problem? Thanks in advance.

  Read the article

• Windows Server Backup fails to backup Hyper-V VM with "Access is denied"

  - by Sebastian Krysmanski

  I'm trying to use Windows Server Backup on my Windows Server 2012 box to backup my Hyper-V VMs. I created a backup job but each job ends with some "Access is denied" errors. One of my VMs (Linux Server) is backed up properly. All others (one Windows 8, one Linux) are not (or at least it seems that way from the looks of the log file below). How can I solve this problem? Here's the log I'm getting: Error in backup of D:\ during read: Error [0x80070005] Access is denied. Application backup Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE} Component: C435964E-C07A-4958-BA73-A04C6583280F Caption : Backup Using Saved State\Alter Server Logical Path: Error : 8078010E Error Message : Copy of the files failed. Detailed Error : 80070005 Detailed Error Message : (null) Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE} Component: E780F138-9676-42FB-821C-4561B9B263DC Caption : Backup Using Child Partition Snapshot\Windows 8 Logical Path: Error : 8078010E Error Message : Copy of the files failed. Detailed Error : 80070005 Detailed Error Message : (null) Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE} Component: Host Component Caption : Host Component Logical Path: Error : 8078010E Error Message : Copy of the files failed. Detailed Error : 80070005 Detailed Error Message : (null)

  Read the article

• routing table permissions under Windows 7 and openvpn

  - by pilcrow

  My ovpn client, 32-bit OpenVPN 2.1.1 on 64-bit Windows 7 Pro, cannot accept routes pushed to it by my remote endpoint ovpn server. This happens even if I invoke OpenVPN as a member of Administrators, and whether or not I've specified script-security 2 (as suggested by [this question][2]). Mon Mar 29 12:57:19 2010 Notified TAP-Win32 driver to set a DHCP IP/netmask of 192.168.254.3/255.255.255.0 on interface {8BE2E9CF-F4C9-4A5E-98FD-E12DF1B6C3A4} [DHCP-serv: 192.168.254.3, lease-time: 86400] Mon Mar 29 12:57:19 2010 NOTE: FlushIpNetTable failed on interface [14] {GUID} (status=5) : Access is denied. Mon Mar 29 12:57:24 2010 TEST ROUTES: 8/8 succeeded len=8 ret=1 a=0 u/d=up Mon Mar 29 12:57:24 2010 C:\WINDOWS\system32\route.exe ADD 172.20.1.0 MASK 255.255.255.0 192.168.254.1 Mon Mar 29 12:57:24 2010 ROUTE: route addition failed using CreateIpForwardEntry: Access is denied. [status=5 if_index=14] Mon Mar 29 12:57:24 2010 Route addition via IPAPI failed [adaptive] Mon Mar 29 12:57:24 2010 Route addition fallback to route.exe Mon Mar 29 12:57:24 2010 ERROR: Windows route add command failed [adaptive]: returned error code 1 ... and so on for each specific route the server pushes out. It doesn't seem right to me that the administrative user, the one configured at Windows 7 install time, should need further privileges. What am I missing?

  Read the article

• Windows Update Agent Update Failed

  - by Adrian Godong

  I'm trying to install the latest version of Windows Update Agent, v7.2.6001.788, and the installation failed with error code of 0x800b0100. Running Windows Server 2008 SP1. The relevant WindowsUpdate.log section: 2009-08-03 16:17:49:334 3544 d28 Misc =========== Logging initialized (build: 7.2.6001.788, tz: +0100) =========== 2009-08-03 16:17:49:334 3544 d28 Misc = Process: d:\fcc0f96e893296900e6501a601\wusetup.exe 2009-08-03 16:17:49:332 3544 d28 Setup Windows Update Client standalone setup : resource dll path is d:\fcc0f96e893296900e6501a601\en\wusetup.exe.mui 2009-08-03 16:17:49:335 3544 d28 Setup Evaluating CBS package "d:\fcc0f96e893296900e6501a601\WUClient-SelfUpdate-Core-TopLevel.cab" 2009-08-03 16:17:49:556 3544 d28 Setup Package will be installed 2009-08-03 16:17:49:556 3544 d28 Setup Evaluating CBS package "d:\fcc0f96e893296900e6501a601\WUClient-SelfUpdate-ActiveX.cab" 2009-08-03 16:17:49:580 3544 d28 Setup Package will be installed 2009-08-03 16:17:49:580 3544 d28 Setup Evaluating CBS package "d:\fcc0f96e893296900e6501a601\WUClient-SelfUpdate-Aux-TopLevel.cab" 2009-08-03 16:17:49:665 3544 d28 Setup Package will be installed 2009-08-03 16:17:49:709 3544 d28 Setup Windows Update Client standalone setup : eula file path is d:\fcc0f96e893296900e6501a601\en\eula.rtf 2009-08-03 16:17:52:337 3544 de0 Misc WARNING: LoadLibrary failed for srclient.dll with hr:8007007E 2009-08-03 16:17:52:338 3544 de0 Setup Installing CBS package "d:\fcc0f96e893296900e6501a601\WUClient-SelfUpdate-Core-TopLevel.cab" 2009-08-03 16:17:53:895 3544 de0 Setup WARNING: CBS operation failed, error = 0x800B0100 2009-08-03 16:17:53:898 3544 de0 Setup WARNING: Install of setup package "d:\fcc0f96e893296900e6501a601\WUClient-SelfUpdate-Core-TopLevel.cab" failed, error = 0x800B0100 2009-08-03 16:18:04:976 3544 d28 Setup wusetup has finished. Exit code is 0. Reboot is NOT needed I think something went wrong twhen loading the srclient.dll. Things that I have done and still no fix: msiexec /unregister and msiexec /register regsvr32 wuapi.dll Run CheckSUR tool and restart

  Read the article

• Windows 7 Media Center PC not displaying MKV files properly

  - by David

  Does anyone know why Windows Media Center wouldn't correctly display a 16x9 video? I just upgraded my home-built HTPC from Vista Ultimate (hey, it was a giveaway) to Windows 7 Ultimate - clean install. After that, I installed the Divx7 beta (to get .MKV support) and AC3filter (so I could HEAR the MKV files). Previously, under Vista Ultimate (32 bit), I had Arcsoft's Total Theater Pro for playing Blu-Rays and MKV decoding under Media Center. Now when I play a 720p 16x9 MKV file, I get some 'letterboxing' - like it's halfway between 4x3 and 16x9 - with the aspect ration looking alightly squished as a result. Here's the wierd part. If I use the Media Center connection software in my XBox 360 - it plays perfectly, filling the 16x9 screen edge-to-edge, just like Vista's WMC software USED to. Of course, beats the network up because the XBox goes to the HTPC, the HTPC goes to my WHS machine to fetch the data, it comes back to the HTPC, gets transcoded and streamed back to the Xbox. I'm running the latest drivers for an NVidia card (as fetched by Windows 7). I have no idea WHY this is because if I play "ordinary" (i.s. SD) Divx files that are 16x9, they play just fine, scaled right up to my screen's edges. It puzzles me as to why the same machine that properly converts the bits for the Xbox can't display/scale them properly for the attached display. Mind you, Windows Media Player exhibits the same symptoms. Ideas?

  Read the article

• Windows XP Installation problems

  - by Samurai Waffle

  I'm having trouble installing Windows XP on a computer... My friend gave me her old computer, it was riddled with viruses and ran extremely slow. I did my best to clean it out, and after a bit I discovered it had a boot sector virus. So I downloaded the Ultimate Boot CD (installed it on a flash drive), and ran Darik's nuke and boot to completely wipe the hard drive. I then tried to reinstall Windows XP from a USB drive... It doesn't work. The computer just stalls and never boots. The computers dvd drive doesn't work, so I borrowed a spare drive that another friend had, and tried to run a Windows XP cd. For a bit I got the stop 7B error, but now it just stalls like the USB drive does. Since then I've booted back into the Ultimate Boot CD, and ran partition magic. Repartitioned the Hard Drive, and copied the files on the Windows cd to the hard drive. I was wondering if there is any way I can make it run the setup.exe off the hard drive. I have the UBCD at my disposal, but have yet to come up with a way to do it. Any help is greatly appreciated.

  Read the article

• Why are folders disappearing in Windows XP?

  - by XenoFoxx

  I am researching a problem for a friend, and unfortunatly do not have direct access to his computer. I've tried to gather as much information as possible and I have researched it on various websites. I've not found anyone having the same problem my friend is having. So here goes: He has a media server in his home running Microsoft Windows XP. It has 3 drives, 1 for the OS and 2 for mass storage. Not long ago he went to access one of the mass storage media drives and it was empty, except for a single folder. His first assumption was that his roommate had deleted everything on the drive (excluding the remaining folder). He then checked the properties of the drive and it was still saying that the hard drive was nearly full. I told him to check the recycling bin, thinking that whoever deleted them didn't clear them from recycling and that they were still taking up space on the drive. My friend said the recycling bin was empty. So we have a drive that the Windows file management system says is empty (again except for the remaining folder), but the properties of the drive say it's mostly full. Now it gets weirder My friend tried to create a new folder on this drive and it auto-named itself "New Folder(1)" which means that it recognizes there is already a "New Folder" in that directory. He tried to rename it to a name that he KNEW was there previsouly, and Windows wouldn't allow it because it was a duplicate folder name. SO now it seems the folders are there, but not displaying in Windows Explorer. Both of us have no idea why this is occuring, why the folders vanished, why the one remaining folder didn't vanish, or how to make them visable again. Anyone else ever experience this? I can get more details if needed.

  Read the article

< Previous Page | 46 47 48 49 50 51 52 53 54 55 56 57  | Next Page >