Search Results

Search found 13662 results on 547 pages for 'facebook ios sdk'.

Page 500/547 | < Previous Page | 496 497 498 499 500 501 502 503 504 505 506 507  | Next Page >

  • Wireless router blocking some sites while using ethernet is fine

    - by Micke
    I'm using Windows 7 and my router is a wireless Apple Airport Express that is approximately two years old. Suddenly I can't access some sites (for example www.sthlm.friskissvettis.se, or www.vegetarian-shoes.co.uk, some streamed tv-shows on svtplay.se, and a number of other random sites) when connecting to internet with my router. It worked good until recently and I'm fairly sure this problem emerged when my ISP upgraded from 10/10mbit to 100/10mbit speed. Most other sites like facebook and google works fine. When using my network cable to connect to internet everything works fine and I can access these sites. Firmware is current and I've tried reseting the router to factory defaults. Tried different browsers, and I can't ping the "blocked" sites either. Tracert www.sthlm.friskissvettis.se starts with 10.0.0.1 and continues through a number of long addresses until it says timeout. The last working address before timeout was sth-tcy-ipcore01-ge-0-2-0.neq.dgcsystems.net [83.241.252.13], if it matters. Tracert www.vegetarian-shoes.co.uk also eventually gives me a timeout. When the network cable is plugged in, I still get timeout on tracert www.sthlm.friskissvettis.se even though I can access the site in Chrome. Weird. www.vegetarian-shoes.co.uk doesn't give me a tracert timeout when the cable is plugged in, and I can access the site as usual. I've tried changing DNS servers to use opendns servers instead, but to no use. I've tried pinging these two sites with a lower MTU packet size (with this method: http://www.richard-slater.co.uk/archives/2009/10/23/change-your-mtu-under-vista-or-windows-7/), but still can't access them through ping... I don't know what to do anymore.... any suggestions???

    Read the article

  • Load Testing a Security/Gateway Appliance

    - by Joel Coel
    In a couple weeks I will load testing a security/gateway appliance. We're a small residential college, and that "residential" means the traffic moving through the appliance is a bit like the Wild West. We have everything from Facebook to World of Warcraft, BitTorrent to Netflix, or Halo to YouTube... basically anything you might find in the home of a high-school or college aged person. Somewhere in there some real academic work gets done as well. We rely on our current appliance for traffic shaping, antivirus, malware filtering, intrusion detection on our servers, logging and abuse reporting, and even some content filtering. All this puts a decent load when we have students around, and I'm concerned about the ability of the new candidate to keep up. On paper it should handle things, but I'm worried. Prior experience is that vendors greatly over-report what an appliance can handle. The product also includes a licensed session limit, and I'm also worried that just a few misbehaving students could unwittingly bring us to that limit and cause service disruptions. I need to know this will work for our campus in order to commit to it. Going a performance level higher in that product takes the pricing way out of line with what we expect and have done in the past. What I need is a good way to load test this guy. My problem is that our current level of summer traffic is less than one percent of what it will be when students come back just six weeks from now. Any ideas on how to really stress this thing and see what it can do, in a way that will give me some clear ideas o. How that will scale for our campus? For the curious, I'm looking at a Watchguard 515, but it could be anything. If I were evaluating a competitor, I'd ask the same question.

    Read the article

  • Tomcat performing terribly for no apparent reason

    - by John
    We're running a game application .WAR on Tomcat 6 on an Amazon EC2 server, 8 core processor, 7gb RAM. The application uses a MySQL database hosted on Amazon RDS. This Facebook application takes ages to access when a mere 20-30 users are playing it. Big difference from 1-2 users. The entire .WAR is ~4mb, all static content hosted elsewhere. The server has never been close to running out of RAM. The CPU utilization has never been higher than 13.5-14%. Even with ~500 users that completely slowed everything to a standstill. The thread count or threadpools isn't close to being maxed out. I heightened maxthreads but it didn't make a noticeable difference. My theory is that Tomcat can only use one processor core, which would explain why it was slowed to a halt even though CPU usage was stably at 13-14% at the activity spike. But I'm struggling to understand why it would only use one CPU core. There is no processor cap in server.xml. The app contains several servlets (4 or 5). There is no mention of SingleThreadModel in the Java code. WHAT could be causing the application to run extremely slowly? If there is only 1-5 people on the application it runs fine. With 20-30 people it's barely contactable.

    Read the article

  • Can't connect to MS SQL Server database using SSMS

    - by Charles
    I have a database on line with Godaddy (who uses SQL Server 2005). They provide basic management tools, but tell you that for more advanced tools you can connect directly using SSMS. I followed their instructions to ensure my online database will accept remote connections, and can apparently log in using SSMS with success (after giving my hostname and access data). However: Now from in SSMS, when attempting to expand the "Databases" folder tree, I get the following error: Failed to retrieve data for this request. (Microsoft.SqlServer.Management.Sdk.Sfc) An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) The server principal "cmitchell" is not able to access the database "3pointdb" under the current security context. (Microsoft SQL Server, Error: 916) The irony is that 3pointdb isn't my database. It is just another in a long list of databases that show up when I access my Godaddy backend. From SSMS, I selected the default database to be the name of my database, which it did locate on the list when I browsed. Still same error message. It is trying to connect to a database that isn't mine! :( Godaddy support, after a bit of testing, said the problem isn't on their end. it's on mine. – Charles

    Read the article

  • Driver issue for 7850 HD Diamond Windows 7

    - by Mr.Student
    I have an issue with windows 7 implementing the drivers ati provides for my 7850 HD Diamond video card. The video card is plugged in correctly to the PCIE 2.0 slots of my motherboard (p6t asus) with more then enough power. Fortunately the card works as I have my monitor plugged into the card itself and I can see just fine. However windows 7 does not replace the standard vga default microsoft driver with catalyst drivers that I've tried installing from online as well as the CD. Every time I install the drivers using Catalyst Install manager it always finishes with "Install complete(Warnings occured)". I then see the warnings it has which it instead reports that it successfully installed the SDK, Catalyst Install Manager, and HDMI/AUDIO packages. When I check my device manager after that, the display adapter still shows as standard vga and that its still using microsoft default display adapter. Now this current card is replacing an old card of mine which is the ATI 4890 HD which works beautifully. In fact for the old card to work, all I need to do is go to device manager and right click on standard vga - click update driver and windows 7 magically finds the correct driver to install and everything is good. Not so with the new card. I've even went into my regedits and uninstalled every bit of ati driver software before reinstalling my new card. Nothing's worked thus far. I've already exchanged my card out once and talked to customer support from my motherboard, microsoft, and ati all blaming the other. Please help me out!!

    Read the article

  • Google chrome not accepting any security certificates

    - by Jerry
    I've recently developed a problem with Google Chrome that's really annoying. I'm using Firefox at the moment with no problems whatsoever and it's the same with IE, so it's safe to say this problem is specific to Chrome. The problem is that it's not accepting security certificates from certain sites. I suppose the best place to start would be google itself. I can't search. The google search page will load but when I type some search term into the search box and hit 'search' I get the message: "You attempted to reach www.google.com, but the server presented an invalid certificate. You cannot proceed because the website operator has requested heightened security for this domain." No matter what the search term is, this is the result. Also when I try to log in to facebook - same message. Youtube works and many other sites that I know present security certs so I'm baffled. I've searched and there are other people who have had similar issues but I can't find a solution anywhere. The most common answer I'm picking up for this is to "check your system time" but I can safely say that it's not my system time. If anyone knows what is going on, I'd very much appreciate being informed. It's not super urgent as I can use Firefox to access those places Chrome won't, but it IS super annoying because I can usually sort out issues like this in no time.

    Read the article

  • X11 performance problem after upgrading from Centos3 to Centos5 with an ATI Rage XL

    - by Marcelo Santos
    After upgrading a computer from Centos3 to Centos5 an application that does a lot of scrolling took a very high performance hit. top tells me that X is using a lot of CPU and that was not happening before. The machine has an ATI Rage XL with 8MB and X is using the ati driver as there is no proprietary ATI driver for this board on linux. The xorg.conf: Section "Device" Identifier "Videocard0" Driver "ati" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection A similar machine that still has Centos3 installed is able to start DRI on the X server while this one is not, this is the Xorg.0.log for the Centos5 machine: drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed [drm] failed to load kernel module "mach64" (II) ATI(0): [drm] drmOpen failed (EE) ATI(0): [dri] DRIScreenInit Failed (II) ATI(0): Largest offscreen areas (with overlaps): (II) ATI(0): 1024 x 1279 rectangle at 0,768 (II) ATI(0): 768 x 1280 rectangle at 0,768 (II) ATI(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 10 256x256 slots (==) ATI(0): Backing store disabled (==) ATI(0): Silken mouse enabled (II) ATI(0): Direct rendering disabled (==) RandR enabled I also tried using EXA instead of XAA and setting: Option "AccelMethod" "XAA" Option "XAANoOffscreenPixmaps" "true" uname -a Linux sir5.erg.inpe.br 2.6.18-128.7.1.el5 #1 SMP Mon Aug 24 08:20:55 EDT 2009 i686 i686 i386 GNU/Linux rpm -qa | grep xorg-x11-server xorg-x11-server-utils-7.1-4.fc6 xorg-x11-server-sdk-1.1.1-48.52.el5 xorg-x11-server-Xvfb-1.1.1-48.52.el5 xorg-x11-server-Xnest-1.1.1-48.52.el5 xorg-x11-server-Xorg-1.1.1-48.52.el5 The drmOpenDevice error continues when using the suggested Option "AIGLX" "true".

    Read the article

  • How to diagnose a hang when creating a new folder in explorer.exe

    - by Jack Ukleja
    I have been having some issues with explorer.exe hanging when I create a new folder. If I use Analyse Wait Chain in the Resource Monitor it says "One or more threads of explorer.exe are waiting to finish network I/O". When I look at the offending thread in Process Explorer it reveals nothing interesting: ntdll.dll!ZwWaitForMultipleObjects+0xa KERNELBASE.dll!GetCurrentThread+0x36 kernel32.dll!WaitForMultipleObjectsEx+0xb3 USER32.dll!PeekMessageW+0x1cd USER32.dll!MsgWaitForMultipleObjectsEx+0x2a USER32.dll!MsgWaitForMultipleObjects+0x20 SHELL32.dll!SHAppBarMessage+0x41e SHELL32.dll!DragAcceptFiles+0x2a3c SHELL32.dll!DragAcceptFiles+0x2a4f SHELL32.dll!Ordinal211+0x124 SHELL32.dll!SHChangeNotification_Unlock+0x12f4 USER32.dll!GetSystemMetrics+0x2b1 USER32.dll!IsDialogMessageW+0x19b USER32.dll!IsDialogMessageW+0x1e1 ntdll.dll!KiUserCallbackDispatcher+0x1f USER32.dll!PeekMessageW+0xba USER32.dll!PeekMessageW+0x89 SHELL32.dll!SHChangeNotification_Unlock+0xd9f SHELL32.dll!Ordinal885+0x1407 SHLWAPI.dll!SHRegGetUSValueW+0x306 kernel32.dll!BaseThreadInitThunk+0xd ntdll.dll!RtlUserThreadStart+0x21 While I was looking at the explorer.exe threads I did notice a fair few that talk about ETW (Event Tracing for Windows) so obviously explorer.exe uses tracing. So I decided to try and user TraceView.exe to try and listen in on the explorer.exe traces. The problem is TraceView requires some difficult-to-come-by stuff... either pdbs, or CTL files, and .TMF files. I tried using the explorer.pdb that comes with the Windows SDK but that did not work. I do not see explorer.exe in the "named providers". And I have no idea where to locate the ctl or .TMF files for explorer.exe. So the question is: Is there a way to view the ETW trace messages from explorer? Or shall I just not bother and go back to the age old technique of disabling every explorer extenion one-by-one in the hope its one of them. (Prefer the former as I like to get to the bottom of things!!)

    Read the article

  • How to start using twill?

    - by brilliant
    How do I start using twill? I have just downloaded it, unpacked it and clicked on the setup .py file in the folder. The black window (terminal) appeared for a moment and vanished. (I do have Python 2.5 installed on my computer - along with SDK from Google App Engine) In the twill documentation section it says: Downloading twill The latest release of twill is twill 0.9, released Thursday, December 27th, 2007; it is available for download at http://darcs.idyll.org/~t/projects/twill-0.9.tar.gz. You can also use Python's easy_install to install or upgrade twill. twill works with Python 2.3 or later. To start using twill, install it and then type twill-sh. At the prompt type: go http://www.slashdot.org/ show showforms showhistory I am not clear from this passage what I am supposed to type (only "twill-sh" or "twill-sh" and all the words under that line) and where (I tried typing it in the command prompt window of my computer - to no avail) Can, anyone, please, help me out here? Thank You in advance.

    Read the article

  • Nvidia Linux Driver Huge Resolution

    - by darxsys
    I'm trying to setup a working CUDA SDK on my Linux Mint. I'm new to Linux and everything connected with it. So, I tried following some steps on how to install CUDA. Firstly, I downloaded a Linux driver from here: http://developer.nvidia.com/cuda/cuda-downloads version 295.41. After that, I barely found a way to run it. I did it like this: 1. typed in sudo init 1 in terminal and switched to root 2. typed service mdm stop 3. ran the *.run file downloaded from the link above Then it started installing the driver. It gave some warning messages, but I ignored it. After installation, I typed init 5 and it came back to GUI screen, BUT everything is huge. I restarted, still huge. My screen resolution is 640x480 on a 17 inch laptop monitor. I tried running Nvidia X Server Settings, but it says: "You do not appear to be using Nvidia X Driver. Please edit your X configuration file." I tried that. Nothing happened. I cant change the resolution because that Nvidia Settings thing gives no options. Then I googled some things, installing some packages - nothing. The biggest problem is I don't understand whats really going on. My laptop is a Samsung with i7 and Nvidia Gt 650M with optimus. I cant even install bumblebee, but that is something I will try if I manage to get my resolution to default. Please, help!

    Read the article

  • Why is Safari on my computer rendering all of the colors -- not just for images -- incorrectly?

    - by richardhenry
    I’m not just talking about image color profile issues; every single color that the browser renders is incorrect. It’s like it’s in it’s own color space (or something!). Screenshot: http://drp.ly/DJk1O (Opera, Safari, Chrome, Firefox) Spot the odd one out? Open this up in Photoshop or similar and try using the eyedropper to select the colour. Safari renders the same hex color completely differently. That color is set using a background-color declaration in CSS, so it should be identical in all four of those browsers. Here’s the HTML I was using: <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> <html lang="en"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> <title>untitled</title> <style type="text/css"> body { background-color: #114742; } </style> </head> <body> </body> </html> Literally every website I’m viewing with my install of Safari is displaying colors incorrectly. The blue of the bar on Facebook is slightly less rich. This doesn’t occur on any other Macs I’ve tried. Any idea what’s happened to my Safari install?

    Read the article

  • Apache2 - rewrite a bunch of specified pathname URLs to one URL

    - by James Nine
    I need to rewrite a bunch of urls (about 100 or so) for SEO purposes, and there may be more being added in the future (probably another 50-100 later on). I need a flexible way of doing this and so far, the only way I can think of is to edit the .htaccess file using the rewrite engine. For example, I have a bunch of urls like this (please note that the query string is irrelevant, and dynamic; it could be anything. I was only using them purely as an example. I am only focusing on the pathname--the part between the hostname and query string, as marked in bold below): http://example.com/seo_term1?utm_source=google&utm_medium=cpc&utm_campaign=seo_term http://example.com/another_seo_term2?utm_source=facebook&utm_medium=cpc&utm_campaign=seo_term http://example.com/yet_another_seo_term3?utm_source=example_ad_network&utm_medium=cpc&utm_campaign=seo_term http://example.com/foobar_seo_term4 http://example.com/blah_seo_term5?test=1 etc... And they are all being rewritten to (for now): http://example.com/ What's the most efficient/effective way of doing this so that I may be able to add more terms in the future? One solution I came across is to do this (in the .htaccess file): RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ / [NC,QSA] However, the problem with this solution is that even invalid urls (such as http://example.com/blah) will be rewritten to http://example.com instead of giving a 404 code (which is what it is supposed to do anyway). I'm still trying to figure out how all this works, and the only way I can think of is to write 100 more RewriteCond statements (such as: RewriteCond %{REQUEST_URI} =/seo_term1 [NC,OR]) before the RewriteRule directive. For example: RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} =/seo_term1 [NC,OR] RewriteCond %{REQUEST_URI} =/another_seo_term2 [NC,OR] RewriteCond %{REQUEST_URI} =/yet_another_seo_term3 [NC,OR] RewriteCond %{REQUEST_URI} =/foobar_seo_term4 [NC,OR] RewriteCond %{REQUEST_URI} =/blah_seo_term5 [NC] RewriteRule ^(.*)$ / [NC,QSA] But that doesn't sound very efficient to me. Is there a better way?

    Read the article

  • Spammer relaying via Postfix mail server

    - by Paddington
    I have a Plesk 9.5 mail server (cm.snowbarre.co.za) on Ubuntu 8.04 LTS which forwards all SMTP traffic to an anti-spam server cacti.snowbarre.co.za. Many times I see the headers on the anti-spam server to contain from addresses not hosted on the mail server and I have checked and confirmed that my server is not an open relay server. How can a spammer be using my server to relay spam traffic? How can I stop this? Open relay test: paddington@paddington-MS-7387:~$ telnet cm 25 Trying 196.201.x.x... Connected to cm. Escape character is '^]'. 220 cm.snowbarre.co.za ESMTP Postfix (Ubuntu) mail from:[email protected] 250 2.1.0 Ok rcpt:[email protected] 221 2.7.0 Error: I can break rules, too. Goodbye. Connection closed by foreign host. paddington@paddington-MS-7387:~$ A typical headers is: *Received from cm.snowbarre.co.za (cm.snowbarre.co.za[196.201.x.x]) by cacti.snowbarre.co.za (Postfix) with ESMTPS id 00B601881AD; Mon, 27 Aug 2012 14:03:29 +0200 (SAST) Received from cm.snowbarre.co.za (localhost [127.0.0.1]) by cm.snowbarre.co.za (Postfix) with ESMTP id 81627367E007; Mon, 27 Aug 2012 14:02:50 +0200 (SAST) Received from User (ml82.128.x.x.multilinksg.com [82.128.x.x]) by cm.snowbarre.co.za (Postfix) with ESMTP; Mon, 27 Aug 2012 14:02:49 +0200 (SAST) Reply-To <[email protected]> From "Ms Nkeuri Aguiyi"<[email protected]> Subject Your Unpaid Fund. Date Mon, 27 Aug 2012 05:03:22 -0700 MIME-Version 1.0 Content-Type text/html; charset="Windows-1251" Content-Transfer-Encoding 7bit X-Priority 3 X-MSMail-Priority Normal X-Mailer Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE Produced By Microsoft MimeOLE V6.00.2600.0000 X-Antivirus avast! (VPS 120821-0, 08/21/2012), Outbound message X-Antivirus-Status Clean Message-Id <[email protected]> To undisclosed-recipients:;*

    Read the article

  • Linux DHCPD Mac-Address based Groups

    - by GruffTech
    Our Current DHCPD.conf looks like the following. subnet 10.0.32.0 netmask 255.255.255.0 { range 10.0.32.100 10.0.32.254; option subnet-mask 255.255.255.0; option broadcast-address 10.0.32.255; option domain-name-servers 208.67.222.222,208.67.220.220; option routers 10.0.32.5; host Dev-ABaird-W { hardware ethernet 00:1D:09:3E:49:13; fixed-address 10.0.32.94; } ... more static hosts .... } About as basic as it gets. The old router is 10.0.32.1, our company wanted to implement a squid proxy to better monitor web traffic while at work, and if necessary block large time-wasters, IE Facebook.com. However, we've quickly realized that this change has played a mean prank on our Polycom SIP Phones. Occasionally our phones will not ring, the end recipient hears ringing (this is artificially created by our PBX) however the handset never rings. The ONLY thing that has changed in our network is the option routers line. So, Since all Polycom MAC addresses begin with 00:04:F2 would it be possible in DHCP to say any 00:04:F2:::* MAC addresses get option routers 10.0.32.1, and anything else must talk with our Gateway?

    Read the article

  • "Error: Unknown error" when trying to start virtual machine from VMware server

    - by slhck
    Problem We are running VMware Server 2.0.0 build-116503 on a Ubuntu 10.04 LTS server. There is a virtual machine installed, running Lotus Domino on Windows Server 2003. Ever since a sudden power failure last week, the virtual machine won't properly start up. When I run the command: vmrun -T server -h https://127.0.0.1:8333/sdk -u root -p jk2x2208 start "[standard] lotus/test.vmx" … after 30 seconds it displays: Error: Unknown error That's about everything I get. I know the command is right, since that's what we've used all the time. This has happened last Saturday after a scheduled backup shutdown, and somehow I was able to start it again. This week, it happened again, and I can't get it back up. Occasionally, I also get: Error: Cannot connect to the virtual machine When I get this, and I run the start command, it seemingly works. Why is this so random? Which configuration could have been messed up? What I've tried / other info I already shut down VMware itself with /etc/init.d/vmware stop. This works. I tried to start VMware again with /etc/init.d/vmware start. It complains that it's "not configured", which is why I had to rm /etc/vmware/not_configured, and then try to start again. There have been no software updates on the machine, and no configuration changes

    Read the article

  • Cannot find wireless driver for HP laptop

    - by rodey
    I have an HP laptop (model: dv7-1267cl, Windows 7 64-bit Home Premium) and I cannot find the wireless driver for the laptop. I am need of a different version because my wireless connection under Windows is flaky and unreliable. I have problems printing to my wireless printer and logging in to and using several sites like reddit.com, phoenix.edu and facebook.com - I get several "page cannot be displayed" messages while using my wireless connection. I disable my wireless adapter and use an ethernet cable and it all works fine. I also used an Ubuntu Live CD to confirm that there is not a problem with the hardware. This is software/driver issue. The drivers were auto installed by the OS. The Device Manager shows the wireless adapter as Atheros AR5009 802.11 a/g/n WiFi Adapter. I have checked the HP website for my laptop and they do not have wireless drivers listed for that model wireless adapter. I have also checked with atheros.com and I do not see my model adapter on their list of available hardware. Device Manager lists the Hardware ID's for my adapter as: PCI\VEN_168C&DEV_002A&SUBSYS_1381103C&REV_01 PCI\VEN_168C&DEV_002A&SUBSYS_1381103C PCI\VEN_168C&DEV_002A&CC_028000 PCI\VEN_168C&DEV_002A&CC_0280 A search for the first Hardware ID turned up this question from experts-exchange.com. tl;dr A driver does not exist for that model adapter.

    Read the article

  • Attempting to set up xampp and zend server on the same machine

    - by umbregachoong
    I am attempting to set up the zend server and xampp on the same machine but I am running into problems. I came across documentation on the zend site that said you cannot do this. However the folks over at apachefriends said you can. I have since discovered that I can run some of the zendframework examples within xampp by downloading the zendframework2 library and the skeleton app from git and I am doing this right now. However, I would like to know how to set them both up without having any conflicts both for the apache2 server and phpmyadmin. (One of the frustrating things is trying to load phpmyadmin in the deployment dialog by using the zpk tool in Zend). What I did in trying to set up both servers on windows 7 is as follows: First I have tried to set up the httpd conf files separately for each server, xampp running on port 8082 , and zend running on port 8088. At the time xampp would work, but zend server would not. This is after setting up the virtual host files separately for each server. Question 1: Where are the zend server error logs? Earlier, I was able to get both of them running configuring the xampp server httpd-conf file alone, however, I experienced problems with phpmyadmin even after configuring phpmyadmin on xampp to work on a different port other than 3306. Second question here: how to set up the two mysql phpmyadmin instances so they do not conflict with each other? Here is the xampp virtual host section: ##ServerAdmin [email protected] DocumentRoot "C:/xampp/htdocs/" ServerName localhost 8082 ##ServerAlias www.dummy-host.example.com ##ErrorLog "logs/dummy-host.example.com-error.log" ##CustomLog "logs/dummy-host.example.com-access.log" common Here is the zend virtual host section: DocumentRoot "C:\Program Files (x86)\Zend\Apache2/htdocs" ServerName localhost:8088 </VirtualHost> I have looked at this httpd.apache.org/docs/2.2/vhosts/ and this http://survivethedeepend.com/zendframeworkbook/en/1.0/creating.a.local.domain.using.apache.virtual.hosts but I am obviously doing something wrong here. I also have the java sdk running on this machine with tomcat and apache and I have no conflicts- too bad this is not the case for zend server and xampp Thanks umbre gachoong

    Read the article

  • I receive email not addressed to me - virus?

    - by Anne
    Every once in a while I receive email (on Gmail) that isn't addressed to me. Gmail puts it in the spam box, because it 'can't verify that it has been sent by [sender]'. The emails, when opened, contain confidential information about deliveries and paid bills (it does look an awful lot like 'real' mail from well-known companies, and it doesn't look like a scam, since the mail is informative - they give information instead of asking for credit card numbers ;-)), and I even got an email from "Facebook" that I requested a password change and that I have to 'click here' to change the password for [email address that isn't mine]. I am not the only addressee, there seems to be a whole list of Gmail addresses beginning with 'a'. The original addressee obviously has some sort of virus, and now I wonder if this could be a risk for me too. Is my email being sent around without my knowing too? I am not the kind of person who randomly clicks on shady links - I am very careful on the internet - but maybe there are other ways of catching viruses? Is there something I should do/check? Thank you for your help!

    Read the article

  • Cannot find wireless driver for HP laptop

    - by rodey
    I have an HP laptop (model: dv7-1267cl, Windows 7 64-bit Home Premium) and I cannot find the wireless driver for the laptop. I am need of a different version because my wireless connection under Windows is flaky and unreliable. I have problems printing to my wireless printer and logging in to and using several sites like reddit.com, phoenix.edu and facebook.com - I get several "page cannot be displayed" messages while using my wireless connection. I disable my wireless adapter and use an ethernet cable and it all works fine. I also used an Ubuntu Live CD to confirm that there is not a problem with the hardware. This is software/driver issue. The drivers were auto installed by the OS. The Device Manager shows the wireless adapter as Atheros AR5009 802.11 a/g/n WiFi Adapter. I have checked the HP website for my laptop and they do not have wireless drivers listed for that model wireless adapter. I have also checked with atheros.com and I do not see my model adapter on their list of available hardware. Device Manager lists the Hardware ID's for my adapter as: PCI\VEN_168C&DEV_002A&SUBSYS_1381103C&REV_01 PCI\VEN_168C&DEV_002A&SUBSYS_1381103C PCI\VEN_168C&DEV_002A&CC_028000 PCI\VEN_168C&DEV_002A&CC_0280 A search for the first Hardware ID turned up this question from experts-exchange.com. tl;dr A driver does not exist for that model adapter.

    Read the article

  • Router block some sites

    - by Mahesha999
    Hi I was using ADSL Modem/Router earlier. The device is quite old Pronet PN-ADSL 101 E/U model (pics: http://bit.ly/P2YaWy, http://bit.ly/OA700l) Since it had only one RJ45 out, I bought new Wireless Router TPLink TL-WR941ND. It has 4 RJ45 out and 3 wireless antennas. I configured my old router in bridge. Now, if I have to connect my pc to Internet through the old router, I have to enter username and password. Then I connected the RJ45 output of old router to the WAN in of new router. and ran the CD of new router. It configured the new router in PPPoE by saving the username and password in router to dial automatically. So now I have to just plug in the wires in my new routers any RJ45 out. I am able to access the Internet when I connect through new router (both wired and wirelessly), but some sites are getting blocked. Most notably yahoo.com (though ymail.com is working), Microsoft.com. msn.com. These sites work perfectly fine when I connect my pc directly to my old router and enter username and password manually. (However others like google.com. facebook.com works fine when connect through new router) So here these some sites need some parameter set but I am unable to find them out. Can anyone help me. My friend said he also faced same problem. Surprisingly he advised me to see if the same websites will work through Opera turbo mode and boom they worked. So what could be the problem?

    Read the article

  • Connection problems via Wifi (multiple devices)

    - by Kelvin Farrell
    I'm having connection issues with my router (Linksys WRT610N) at home. There are a number of things that are happening (may be more, this is just what I've mainly noticed)... 1) Using my laptop (Macbook Pro OSX Lion), I am unable to complete any operations with my external FTP server, hosted with FatCow. I can connect to it, navigate through all the files, but when I try to edit/delete/add a file the operation times out. EVERY time. I've used two other Wifi connection on my laptop and neither have this issue. 2) I am unable to upload photos/videos to Facebook or Twitter using my phone (Samsung Galaxy S2) or my tablet (HP Touchpad - CM9). Neither am I able to upload files to Dropbox via either of the devices. Same thing happens in all situations; the upload will begin and it will just hang on 0% forever. After about 10 mins I am always forced to disconnect the Wifi to stop the action. 3) My laptop is having slow internet speed, even though we are on 20mb broadband. Speedtests say I'm getting a good connection and my Ping is good, but when using streaming services like Spotify, it takes forever to load a page and frequently stops to buffer whilst playing a song. Don't know if it's worth mentioning but I have no issues with my XBox (Ethernet), AppleTV (Wifi) or my girlfrield's phone (Nokia Lumia 800 - WP7.5) on the network. I'd really appreciate any help. This is driving me insane and is really affecting both my working and leisure use of the internet.

    Read the article

  • Python module: Trouble Installing Bitarray 0.8.0 on Mac OSX 10.7.4

    - by Gabriele
    I'm new here! I have trouble installing bitarray (vers 0.8.0) on my Mac OSX 10.7.4. Thanks! ('gcc' does not seem to be the problem) Last login: Sun Sep 9 22:24:25 on ttys000 host-001:~ gabriele$ gcc -version i686-apple-darwin11-llvm-gcc-4.2: no input files host-001:~ gabriele$ Last login: Sun Sep 9 22:18:41 on ttys000 host-001:~ gabriele$ cd /Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/bitarray-0.8.0/ host-001:bitarray-0.8.0 gabriele$ python2.7 setup.py installrunning install running bdist_egg running egg_info creating bitarray.egg-info writing bitarray.egg-info/PKG-INFO writing top-level names to bitarray.egg-info/top_level.txt writing dependency_links to bitarray.egg-info/dependency_links.txt writing manifest file 'bitarray.egg-info/SOURCES.txt' reading manifest file 'bitarray.egg-info/SOURCES.txt' writing manifest file 'bitarray.egg-info/SOURCES.txt' installing library code to build/bdist.macosx-10.6-intel/egg running install_lib running build_py creating build creating build/lib.macosx-10.6-intel-2.7 creating build/lib.macosx-10.6-intel-2.7/bitarray copying bitarray/__init__.py -> build/lib.macosx-10.6-intel-2.7/bitarray copying bitarray/test_bitarray.py -> build/lib.macosx-10.6-intel-2.7/bitarray running build_ext building 'bitarray._bitarray' extension creating build/temp.macosx-10.6-intel-2.7 creating build/temp.macosx-10.6-intel-2.7/bitarray gcc-4.2 -fno-strict-aliasing -fno-common -dynamic -isysroot /Developer/SDKs/MacOSX10.6.sdk -arch i386 -arch x86_64 -g -O2 -DNDEBUG -g -O3 -I/Library/Frameworks/Python.framework/Versions/2.7/include/python2.7 -c bitarray/_bitarray.c -o build/temp.macosx-10.6-intel-2.7/bitarray/_bitarray.o unable to execute gcc-4.2: No such file or directory error: command 'gcc-4.2' failed with exit status 1 host-001:bitarray-0.8.0 gabriele$

    Read the article

  • Has anyone else experienced page fault crashes with Snow Leopard on MacBook Pro?

    - by BruceMartin
    I bought a Macbook Pro computer on Sept 3rd from MacMall. As I was using it to learn Snow Leopard (this is my first Mac, I am a long time Windows developer), it would crash every one or two hours. After calling Apple support, I dropped it off at the Apple store for diagnostic testing and repair. WhenI picked up the computer from Apple, they told me that it did not crash while they had it. They suspected a software problem, so they had done a fresh install of Snow Leopard for me. At home I went through the start up procedure with the newly installed Snow Leopard. Then I downloaded the iPhone SDK, and the computer crashed again while I was away waiting for the download to finish. I was using a USB mouse, which was the only device attached. No other software installed. I was presented with a dump that mentions terms like "panic", Kernel trap", and "page fault". Does anyone have any idea what this problem might be? I really can not use this MacBook under these circumstances.

    Read the article

  • Is Cherokee (probably) the best static content server for beginner sysadmins?

    - by Bad Learner
    I have read the pros and cons of most of the popular web servers and have come to a conclusion that Apache would (probably) be the best web server for serving dynamic content - - no wonder YouTube, Flickr and Facbook, among many others, use it. I do not know if that C10K problem applies to Apache even when serving dynamic content only, but I think any web server used to serve dynamic content needs some good tweaking for optimized performance, and the fact that nothing beats Apache when it comes to documentation, resources and support on the web, I think should will go with Apache for dynamic content. That apart, the confusion begins when it comes to choosing web servers for static content (including streaming videos). I see that Nginx, Cherokee and Lighttpd are among the best (I am not considering non-open source or non-linux stuff here). So, which too choose? I know one cannot go wrong with any of the three (Nginx, Cherokee, Lighttpd). Lighttpd's development has evidently gotten slower than it was a good time ago. The documentation is pretty good for all the three, and hopefully, so are the resources (knowledge of these among the users of Stackoverflow/Serverfault sites, the web etc). Precisely, and noting point [2] and [3], if I am not wrong, I should either go with Nginx or Cherokee. I would love to see someone clarify these... is Cherokee just as fast (mb/s), performant (connections/s), and reliable (think downtime/restarting server) as Nginx for serving static content and load balancing, for small, medium to large (and really large) websites and applications? (Think, the size of YouTube, Apache or Facebook.) if the answer for the Q above is a big "hell, yes!" then, I should probably prefer Cherokee, right? Because, since I am a beginner, it would a lot easier to setup Cherokee as it has a graphical admin user interface + really good documentation. Yes? I could be wrong, I could be right. I put down what I know so that you can offer most relevant advise. Pardon if anything I've said is offensive.

    Read the article

  • How do I replicate Gmail filtering (forwarding mostly)?

    - by projectdp
    I have reached the limits of Gmail forwarding. Before there was no need to verify forwarding addresses. It's a problem for me now because the addresses I want to forward to are not natural inboxes but automated systems with no way to track the verification email contents. I want to set this up for example: mobile - email - facebook-email - flickr-email - tumblr-email - posterous-email How do I do this without Gmail filters? I think I need to use fetchmail to watch my inbox and then autoforward to the above addresses. Is fetchmail the best solution to this issue? Any other MRA's? I'd like to do some more complicated things with the emails in an automated fashion too, how would I go about monitoring the inbox, doing some actions to the email before forwarding, and forward everywhere? prerequisites: a server: fetchmail daemon to poll the account local mailbox script to clean & forward appropriately (python probably) sendmail + ~/.forward file backup email account (Gmail probably) Any help would be greatly appreciated. I'm trying to automate my social content distribution.

    Read the article

< Previous Page | 496 497 498 499 500 501 502 503 504 505 506 507  | Next Page >