Search Results

Search found 14311 results on 573 pages for 'stan note'.

Page 500/573 | < Previous Page | 496 497 498 499 500 501 502 503 504 505 506 507  | Next Page >

  • Bugs in Excel's ActiveX combo boxes?

    - by k.robinson
    I have noticed that I get all sorts of annoying errors when: I have ActiveX comboboxes on a worksheet (not an excel form) The comboboxes have event code linked to them (eg, onchange events) I use their listfillrange or linkedcell properties (clearing these properties seems to alleviate a lot of problems) (Not sure if this is connected) but there is data validation on the targeted linkedcell. I program a fairly complex excel application that does a ton of event handling and uses a lot of controls. Over the months, I have been trying to deal with a variety of bugs dealing with those combo boxes. I can't recall all the details of each instance now, but these bugs tend to involve pointing the listfillrange and linkedcell properties at named ranges, and often have to do with the combo box events triggering at inappropriate times (such as when application.enableevents = false). These problems seemed to grow bigger in Excel 2007, so that I had to give up on these combo boxes entirely (I now use combo boxes contained in user forms, rather than directly on the sheets). Has anyone else seen similar problems? If so, was there a graceful solution? I have looked around with Google and so far haven't spotted anyone with similar issues. Some of the symptoms I end up seeing are: Excel crashing when I start up (involves combobox_onchange, listfillrange-named range on another different sheet, and workbook_open interactions). (note, I also had some data validation on the the linked cells in case a user edited them directly.) Excel rendering bugs (usually when the combo box changes, some cells from another sheet get randomly drawn over the top of the current sheet) Sometimes it involves the screen flashing entirely to another sheet for a moment. Excel losing its mind (or rather, the call stack) (related to the first bullet point). Sometimes when a function modifies a property of the comboboxes, the combobox onchange event fires, but it never returns control to the function that caused the change in the first place. The combobox_onchange events are triggered even when application.enableevents = false. Events firing when they shouldn't (I posted another question on stack overflow related to this). At this point, I am fairly convinced that ActiveX comboboxes are evil incarnate and not worth the trouble. I have switched to including these comboboxes inside a userform module instead. I would rather inconvenience users with popup forms than random visual artifacts and crashing (with data loss).

    Read the article

  • MSSQL: How to copy a file (pdf, doc, txt...) stored in a varbinary(max) field to a file in a CLR sto

    - by user193655
    I ask this question as a followup of this question. A solution that uses bcp and xp_cmdshell, that is not my desired solution, has been posted here: stackoverflow.com/questions/828749/ms-sql-server-2005-write-varbinary-to-file-system (sorry i cannot post a second hyperlink since my reputation is les than 10). I am new to c# (since I am a Delphi developer) anyway I was able to create a simple CLR stored procedures by following a tutorial. My task is to move a file from the client file system to the server file system (the server can be accessed using remote IP, so I cannot use a shared folder as destination, this is why I need a CLR stored procedure). So I plan to: 1) store from Delphi the file in a varbinary(max) column of a temporary table 2) call the CLR stored procedure to create a file at the desired path using the data contained in the varbinary(max) field Imagine I need to move C:\MyFile.pdf to Z:\MyFile.pdf, where C: is a harddrive on local system and Z: is an harddrive on the server. I provide the code below (not working) that someone can modify to make it work? Here I suppose to have a table called MyTable with two fields: ID (int) and DATA (varbinary(max)). Please note it doesn't make a difference if the table is a real temporary table or just a table where I temporarly store the data. I would appreciate if some exception handling code is there (so that I can manage an "impossible to save file" exception). I would like to be able to write a new file or overwrite the file if already existing. [Microsoft.SqlServer.Server.SqlProcedure] public static void VarbinaryToFile(int TableId) { using (SqlConnection connection = new SqlConnection("context connection=true")) { connection.Open(); SqlCommand command = new SqlCommand("select data from mytable where ID = @TableId", connection); command.Parameters.AddWithValue("@TableId", TableId); // This was the sample code I found to run a query //SqlContext.Pipe.ExecuteAndSend(command); // instead I need something like this (THIS IS META_SYNTAX!!!): SqlContext.Pipe.ResultAsStream.SaveToFile('z:\MyFile.pdf'); } } (one subquestion is: is this approach coorect or there is a way to directly pass the data to the CLR stored procedure so I don't need to use a temp table?) If the subquestion's answer is No, could you describe the approach of avoiding a temp table? So is there a better way then the one I describe above (=temp table + Stored procedure)? A way to directly pass the dataastream from the client application to the CLR stored procedure? (my files can be any size but also very big)

    Read the article

  • Center content of UISCrollView when smaller

    - by hgpc
    I have an UIImageView inside a UIScrollView which I use for zooming and scrolling. If the image/content of the scroll view if bigger than the scroll view everything works fine. However, when the image becomes smaller than the scroll view, it sticks to the top left corner of the scroll view. I would like to keep it centered, like the Photos app. Any ideas or examples about keeping the content of the UIScrollView centered when smaller? I am working with iPhone 3.0. The following code almost works. The image returns to the top left corner if I pinch it after reaching the minimum zoom level. - (void)loadView { [super loadView]; // set up main scroll view imageScrollView = [[UIScrollView alloc] initWithFrame:[[self view] bounds]]; [imageScrollView setBackgroundColor:[UIColor blackColor]]; [imageScrollView setDelegate:self]; [imageScrollView setBouncesZoom:YES]; [[self view] addSubview:imageScrollView]; UIImageView *imageView = [[UIImageView alloc] initWithImage:[UIImage imageNamed:@"WeCanDoIt.png"]]; [imageView setTag:ZOOM_VIEW_TAG]; [imageScrollView setContentSize:[imageView frame].size]; [imageScrollView addSubview:imageView]; CGSize imageSize = imageView.image.size; [imageView release]; CGSize maxSize = imageScrollView.frame.size; CGFloat widthRatio = maxSize.width / imageSize.width; CGFloat heightRatio = maxSize.height / imageSize.height; CGFloat initialZoom = (widthRatio heightRatio) ? heightRatio : widthRatio; [imageScrollView setMinimumZoomScale:initialZoom]; [imageScrollView setZoomScale:1]; float topInset = (maxSize.height - imageSize.height) / 2.0; float sideInset = (maxSize.width - imageSize.width) / 2.0; if (topInset < 0.0) topInset = 0.0; if (sideInset < 0.0) sideInset = 0.0; [imageScrollView setContentInset:UIEdgeInsetsMake(topInset, sideInset, -topInset, -sideInset)]; } - (UIView *)viewForZoomingInScrollView:(UIScrollView *)scrollView { return [imageScrollView viewWithTag:ZOOM_VIEW_TAG]; } /************************************** NOTE **************************************/ /* The following delegate method works around a known bug in zoomToRect:animated: */ /* In the next release after 3.0 this workaround will no longer be necessary */ /**********************************************************************************/ - (void)scrollViewDidEndZooming:(UIScrollView *)scrollView withView:(UIView *)view atScale:(float)scale { [scrollView setZoomScale:scale+0.01 animated:NO]; [scrollView setZoomScale:scale animated:NO]; // END Bug workaround CGSize maxSize = imageScrollView.frame.size; CGSize viewSize = view.frame.size; float topInset = (maxSize.height - viewSize.height) / 2.0; float sideInset = (maxSize.width - viewSize.width) / 2.0; if (topInset < 0.0) topInset = 0.0; if (sideInset < 0.0) sideInset = 0.0; [imageScrollView setContentInset:UIEdgeInsetsMake(topInset, sideInset, -topInset, -sideInset)]; }

    Read the article

  • WCF - Windows authentication - Security settings require Anonymous...

    - by Rashack
    Hi, I am struggling hard with getting WCF service running on IIS on our server. After deployment I end up with an error message: Security settings for this service require 'Anonymous' Authentication but it is not enabled for the IIS application that hosts this service. I want to use Windows authentication and thus I have Anonymous access disabled. Also note that there is aspNetCompatibilityEnabled (if that makes any difference). Here's my web.config: <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" /> <bindings> <webHttpBinding> <binding name="default"> <security mode="TransportCredentialOnly"> <transport clientCredentialType="Windows" proxyCredentialType="Windows"/> </security> </binding> </webHttpBinding> </bindings> <behaviors> <endpointBehaviors> <behavior name="AspNetAjaxBehavior"> <enableWebScript /> <webHttp /> </behavior> </endpointBehaviors> <serviceBehaviors> <behavior name="defaultServiceBehavior"> <serviceMetadata httpGetEnabled="true" httpsGetEnabled="false" /> <serviceDebug includeExceptionDetailInFaults="true" /> <serviceAuthorization principalPermissionMode="UseWindowsGroups" /> </behavior> </serviceBehaviors> </behaviors> <services> <service name="xxx.Web.Services.RequestService" behaviorConfiguration="defaultServiceBehavior"> <endpoint behaviorConfiguration="AspNetAjaxBehavior" binding="webHttpBinding" contract="xxx.Web.Services.IRequestService" bindingConfiguration="default"> </endpoint> <endpoint address="mex" binding="mexHttpBinding" name="mex" contract="IMetadataExchange"></endpoint> </service> </services> </system.serviceModel> I have searched all over the internet with no luck. Any clues are greatly appreciated.

    Read the article

  • Detecting which UIButton was pressed in a UITableView

    - by rein
    Hi, I have a UITableView with 5 UITableViewCells. Each cell contains a UIButton which is set up as follows: - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { NSString *identifier = @"identifier"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:identifier]; if (cell == nil) { cell = [[UITableView alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:identifier]; [cell autorelelase]; UIButton *button = [[UIButton alloc] initWithFrame:CGRectMake(10, 5, 40, 20)]; [button addTarget:self action:@selector(buttonPressedAction:) forControlEvents:UIControlEventTouchUpInside]; [button setTag:1]; [cell.contentView addSubview:button]; [button release]; } UIButton *button = (UIButton *)[cell viewWithTag:1]; [button setTitle:@"Edit" forState:UIControlStateNormal]; return cell; } My question is this: in the buttonPressedAction: method, how do I know which button has been pressed. I've considered using tags but I'm not sure this is the best route. I'd like to be able to somehow tag the indexPath onto the control. - (void)buttonPressedAction:(id)sender { UIButton *button = (UIButton *)sender; // how do I know which button sent this message? // processing button press for this row requires an indexPath. } What's the standard way of doing this? Edit: I've kinda solved it by doing the following. I would still like to have an opinion whether this is the standard way of doing it or is there a better way? - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { NSString *identifier = @"identifier"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:identifier]; if (cell == nil) { cell = [[UITableView alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:identifier]; [cell autorelelase]; UIButton *button = [[UIButton alloc] initWithFrame:CGRectMake(10, 5, 40, 20)]; [button addTarget:self action:@selector(buttonPressedAction:) forControlEvents:UIControlEventTouchUpInside]; [cell.contentView addSubview:button]; [button release]; } UIButton *button = (UIButton *)[cell.contentView.subViews objectAtIndex:0]; [button setTag:indexPath.row]; [button setTitle:@"Edit" forState:UIControlStateNormal]; return cell; } - (void)buttonPressedAction:(id)sender { UIButton *button = (UIButton *)sender; int row = button.tag; } What's important to note is that I can't set the tag in the creation of the cell since the cell might be dequeued instead. It feels very dirty. There must be a better way.

    Read the article

  • cakephp bake view Errors

    - by James
    I have previously baked a controller for a model that I have created. When attempting to bake the view using cakephp I get the following errors: Interactive Bake Shell --------------------------------------------------------------- [D]atabase Configuration [M]odel [V]iew [C]ontroller [P]roject [Q]uit What would you like to Bake? (D/M/V/C/P/Q) > v --------------------------------------------------------------- Bake View Path: /Applications/MAMP/htdocs/app/views/ --------------------------------------------------------------- Possible Controllers based on your current database: 1. Dealers 2. Products 3. Users Enter a number from the list above, type in the name of another controller, or 'q' to exit [q] > 2 Would you like to create some scaffolded views (index, add, view, edit) for this controller? NOTE: Before doing so, you'll need to create your controller and model classes (including associated models). (y/n) [n] > y Would you like to create the views for admin routing? (y/n) [y] > n Warning: mysql_query() expects parameter 2 to be resource, boolean given in /Applications/MAMP/htdocs/cake/libs/model/datasources/dbo/dbo_mysql.php on line 500 Warning: mysql_errno() expects parameter 1 to be resource, boolean given in /Applications/MAMP/htdocs/cake/libs/model/datasources/dbo/dbo_mysql.php on line 576 Warning: Invalid argument supplied for foreach() in /Applications/MAMP/htdocs/cake/libs/model/datasources/dbo/dbo_mysql.php on line 102 Warning: array_keys() expects parameter 1 to be array, boolean given in /Applications/MAMP/htdocs/cake/console/libs/tasks/view.php on line 263 Warning: mysql_query() expects parameter 2 to be resource, boolean given in /Applications/MAMP/htdocs/cake/libs/model/datasources/dbo/dbo_mysql.php on line 500 Warning: mysql_errno() expects parameter 1 to be resource, boolean given in /Applications/MAMP/htdocs/cake/libs/model/datasources/dbo/dbo_mysql.php on line 576 Warning: Invalid argument supplied for foreach() in /Applications/MAMP/htdocs/cake/libs/model/datasources/dbo/dbo_mysql.php on line 102 Warning: array_keys() expects parameter 1 to be array, boolean given in /Applications/MAMP/htdocs/cake/console/libs/tasks/view.php on line 382 Creating file /Applications/MAMP/htdocs/app/views/products/index.ctp Wrote /Applications/MAMP/htdocs/app/views/products/index.ctp Creating file /Applications/MAMP/htdocs/app/views/products/view.ctp Wrote /Applications/MAMP/htdocs/app/views/products/view.ctp Creating file /Applications/MAMP/htdocs/app/views/products/add.ctp Wrote /Applications/MAMP/htdocs/app/views/products/add.ctp Creating file /Applications/MAMP/htdocs/app/views/products/edit.ctp Wrote /Applications/MAMP/htdocs/app/views/products/edit.ctp --------------------------------------------------------------- View Scaffolding Complete. Anybody know why? Google hasn't been a whole lot of help. cakephp 1.2.6 under MAMP on OSX 10.6.2

    Read the article

  • surfaceview + glsurfaceview + framelayout

    - by pohtzeyun
    Hi, I'm new at this (java and opengl) so please bear with me if the answer to the question is simple. :) I'm trying to get a camera preview screen with the ability to display 3d objects simultaneously. Having gone through the samples at the api demos, I thought combining the code for the the examples at the api demo would suffice. But somehow its not working. The forces me to shut down upon startup and the error is mentioned as null pointer exception. Could someone share with me where did I go wrong and how to proceed from there. How I did the combination for the code is as shown below: myoverview.xml <?xml version="1.0" encoding="utf-8"?> <FrameLayout xmlns:android="http://schemas.android.com/apk/res/android" android:orientation="horizontal" android:layout_width="fill_parent" android:layout_height="fill_parent"> <android.opengl.GLSurfaceView android:id="@+id/cubes" android:orientation="horizontal" android:layout_width="fill_parent" android:layout_height="fill_parent"/> <SurfaceView android:id="@+id/camera" android:layout_width="fill_parent" android:layout_height="fill_parent"/> </FrameLayout> myoverview.java import android.app.Activity; import android.os.Bundle; import android.view.SurfaceView; import android.view.Window; public class MyOverView extends Activity { @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); // Hide the window title. requestWindowFeature(Window.FEATURE_NO_TITLE); // camera view as the background SurfaceView cameraView = (SurfaceView) findViewById(R.id.camera); cameraView = new CameraView(this); // visual of both cubes GLSurfaceView cubesView = (GLSurfaceView) findViewById(R.id.cubes); cubesView = new GLSurfaceView(this); cubesView.setRenderer(new CubeRenderer(false)); // set view setContentView(R.layout.myoverview); } } GLSurfaceView.java import android.content.Context; class GLSurfaceView extends android.opengl.GLSurfaceView { public GLSurfaceView(Context context) { super(context); } } NOTE : I didnt list the rest of the files as they are just copies of the api demos. The cameraView refers to the camerapreview.java example and the CubeRenderer refers to the CubeRenderer.java and Cube.java example. Any help would be appreciated as I've been stuck at this for a couple of days :p Thanks Sorry, didnt realise that the coding was out of place due to formatting mistakes. :p

    Read the article

  • Search Display Controller Crashes When Returning Results

    - by Convolution
    I have a tableview with a search display controller. It has been working fine in the past, but recently has started crashing for certain search results. Here my code searches a Golfer based on their Name, Age and Handicap. The data is correctly loaded into the table, I can access and drill down to receive further information. However when I type in a search query for either Name or Age, the app crashes, while the Golfers Handicap is returned fine. Note: dataSouceArray is the data source for the tableview, dataSourceArrayCopy is the mutable copy of the data used to add and remove objects in the search filter. - (void)filterContentForSearchText:(NSString*)searchText scope:(NSString*)scope { /* Update the filtered array based on the search text and scope. */ [self.dataSourceArrayCopy removeAllObjects]; // First clear the filtered array. /* Search the main list for products whose type matches the scope (if selected) and whose name matches searchText; add items that match to the filtered array. */ for (Golfer *golfer in dataSourceArray) { if ([scope isEqualToString:@"Name"] || [golfer.golferName isEqualToString:scope]) { NSComparisonResult result = [golfer.golferName compare:searchText options:(NSCaseInsensitiveSearch|NSDiacriticInsensitiveSearch) range:NSMakeRange(0, [searchText length])]; if (result == NSOrderedSame) { [self.customerListCopy addObject:golfer]; } } if ([scope isEqualToString:@"Age"] || [golfer.golferAge isEqualToString:scope]) { NSComparisonResult result = [golfer.golferAge compare:searchText options:(NSCaseInsensitiveSearch|NSDiacriticInsensitiveSearch) range:NSMakeRange(0, [searchText length])]; if (result == NSOrderedSame) { [self.dataSourceArrayCopy addObject:golfer]; } } if ([scope isEqualToString:@"Handicap"] || [golfer.golferHandicap isEqualToString:scope]) { NSComparisonResult result = [golfer.golferHandicap compare:searchText options:(NSCaseInsensitiveSearch|NSDiacriticInsensitiveSearch) range:NSMakeRange(0, [searchText length])]; if (result == NSOrderedSame) { [self.dataSourceArrayCopy addObject:golfer]; } } } } - (BOOL)searchDisplayController:(UISearchDisplayController *)controller shouldReloadTableForSearchString:(NSString *)searchString { [self filterContentForSearchText:searchString scope: [[self.searchDisplayController.searchBar scopeButtonTitles] objectAtIndex:[self.searchDisplayController.searchBar selectedScopeButtonIndex]]]; // Return YES to cause the search result table view to be reloaded. return YES; } - (BOOL)searchDisplayController:(UISearchDisplayController *)controller shouldReloadTableForSearchScope:(NSInteger)searchOption { [self filterContentForSearchText:[self.searchDisplayController.searchBar text] scope: [[self.searchDisplayController.searchBar scopeButtonTitles] objectAtIndex:searchOption]]; // Return YES to cause the search result table view to be reloaded. return YES; } Any help would be appreciated, thank you for taking the time to read this.

    Read the article

  • C++ template-function -> passing a template-class as template-argument

    - by SeMa
    Hello, i try to make intensive use of templates to wrap a factory class: The wrapping class (i.e. classA) gets the wrapped class (i.e. classB) via an template-argument to provide 'pluggability'. Additionally i have to provide an inner-class (innerA) that inherits from the wrapped inner-class (innerB). The problem is the following error-message of the g++ "gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5)": sebastian@tecuhtli:~/Development/cppExercises/functionTemplate$ g++ -o test test.cpp test.cpp: In static member function ‘static classA<A>::innerA<iB>* classA<A>::createInnerAs(iB&) [with iB = int, A = classB]’: test.cpp:39: instantiated from here test.cpp:32: error: dependent-name ‘classA::innerA<>’ is parsed as a non-type, but instantiation yields a type test.cpp:32: note: say ‘typename classA::innerA<>’ if a type is meant As you can see in the definition of method createInnerBs, i intend to pass a non-type argument. So the use of typename is wrong! The code of test.cpp is below: class classB{ public: template < class iB> class innerB{ iB& ib; innerB(iB& b) :ib(b){} }; template<template <class> class classShell, class iB> static classShell<iB>* createInnerBs(iB& b){ // this function creates instances of innerB and its subclasses, // because B holds a certain allocator return new classShell<iB>(b); } }; template<class A> class classA{ // intention of this class is meant to be a pluggable interface // using templates for compile-time checking public: template <class iB> class innerA: A::template innerB<iB>{ innerA(iB& b) :A::template innerB<iB>(b){} }; template<class iB> static inline innerA<iB>* createInnerAs(iB& b){ return A::createInnerBs<classA<A>::template innerA<> >(b); // line 32: error occurs here } }; typedef classA<classB> usable; int main (int argc, char* argv[]){ int a = 5; usable::innerA<int>* myVar = usable::createInnerAs(a); return 0; } Please help me, i have been faced to this problem for several days. Is it just impossible, what i'm trying to do? Or did i forgot something? Thanks, Sebastian

    Read the article

  • Android -- autoLink

    - by Ryan
    Is there any way to Linkify a specific TextView that is contained within a ListView? I tried using android:autoLink="all" but that didn't work. I was getting an out of context error. Important also to note: the ListView is my second view in the ViewFlipper. I have also tried: View mItemView = mAdapter.getView(2, null, null); TextView infoText = (TextView) mItemView.findViewById(R.id.rowText2); Linkify.addLinks(infoText, Linkify.ALL); Right after the adapter was bound to the ListView and the View was switched. No luck. Here is the stack trace: 06-03 21:19:25.180: ERROR/AndroidRuntime(1214): Uncaught handler: thread main exiting due to uncaught exception 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): android.util.AndroidRuntimeException: Calling startActivity() from outside of an Activity context requires the FLAG_ACTIVITY_NEW_TASK flag. Is this really what you want? 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at android.app.ApplicationContext.startActivity(ApplicationContext.java:550) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at android.content.ContextWrapper.startActivity(ContextWrapper.java:248) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at android.text.style.URLSpan.onClick(URLSpan.java:62) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at android.text.method.LinkMovementMethod.onTouchEvent(LinkMovementMethod.java:216) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at android.widget.TextView.onTouchEvent(TextView.java:6560) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at android.view.View.dispatchTouchEvent(View.java:3709) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:884) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:884) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:884) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:884) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:884) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:884) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at android.view.ViewGroup.dispatchTouchEvent(ViewGroup.java:884) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at com.android.internal.policy.impl.PhoneWindow$DecorView.superDispatchTouchEvent(PhoneWindow.java:1659) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at com.android.internal.policy.impl.PhoneWindow.superDispatchTouchEvent(PhoneWindow.java:1107) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at android.app.Activity.dispatchTouchEvent(Activity.java:2061) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at com.android.internal.policy.impl.PhoneWindow$DecorView.dispatchTouchEvent(PhoneWindow.java:1643) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at android.view.ViewRoot.handleMessage(ViewRoot.java:1691) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at android.os.Handler.dispatchMessage(Handler.java:99) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at android.os.Looper.loop(Looper.java:123) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at android.app.ActivityThread.main(ActivityThread.java:4363) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at java.lang.reflect.Method.invokeNative(Native Method) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at java.lang.reflect.Method.invoke(Method.java:521) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618) 06-03 21:19:25.219: ERROR/AndroidRuntime(1214): at dalvik.system.NativeStart.main(Native Method) Any Ideas? Thanks in advance!!!

    Read the article

  • How to compile jsoup through Ant?

    - by JackWM
    I tried to use Ant to compile the jsoup source. I can compile successfully, but cannot pass the test. Here is the process: jsoup version: 1.6.3 ; Ant version: 1.8.2 the source of jsoup is in the directory src/ I made a build file src/build.xml This file contains <project name="jsoup"> <target name="compile"> <mkdir dir="build/classes"/> <javac srcdir="src" destdir="build/classes" includeantruntime="false"/> </target> <target name="jar"> <mkdir dir="build/jar"/> <jar destfile="build/jar/jsoup.jar" basedir="build/classes"> <manifest> <attribute name="Main-Class" value="StateTrace"/> </manifest> </jar> </target> <target name="run"> <!--<java jar="build/jar/jsoup.jar" input="htmls/index.html" fork="true"/>--> <exec executable="java"> <arg value="-jar"/> <arg value="build/jar/jsoup.jar"/> <arg value="htmls/index.html"/> </exec> </target> </project> Note: 1. StateTrace.java is my own test program; 2. htmls/index.html is the input to StateTrace.java. Then I compile and run it with Ant: > ant compile > ant jar > ant run After this, I got err like: run: [exec] Exception in thread "main" java.lang.ExceptionInInitializerError [exec] at org.jsoup.nodes.Entities$EscapeMode.<clinit>(Unknown Source) [exec] at org.jsoup.nodes.Document$OutputSettings.<init>(Unknown Source) [exec] at org.jsoup.nodes.Document.<init>(Unknown Source) [exec] at org.jsoup.parser.TreeBuilder.initialiseParse(Unknown Source) [exec] at org.jsoup.parser.TreeBuilder.parse(Unknown Source) [exec] at org.jsoup.parser.HtmlTreeBuilder.parse(Unknown Source) [exec] at org.jsoup.parser.Parser.parse(Unknown Source) [exec] at org.jsoup.Jsoup.parse(Unknown Source) [exec] at StateTrace.main(Unknown Source) [exec] Caused by: java.lang.NullPointerException [exec] at java.util.Properties$LineReader.readLine(Properties.java:418) [exec] at java.util.Properties.load0(Properties.java:337) [exec] at java.util.Properties.load(Properties.java:325) [exec] at org.jsoup.nodes.Entities.loadEntities(Unknown Source) [exec] at org.jsoup.nodes.Entities.<clinit>(Unknown Source) [exec] ... 9 more [exec] Result: 1 BUILD SUCCESSFUL Total time: 0 seconds However, if I manually compiled all the java source, like javac src/org/jsoup/*.java src/org/jsoup/parser/*.java src/org/jsoup/examples/*.java src/org/jsoup/nodes/*.java src/org/jsoup/safety/*.java src/org/jsoup/select/*.java src/org/jsoup/helper/*.java I could compile successfully and pass my test. Any clue? Thanks!

    Read the article

  • CSS layout mystery

    - by selfthinker
    Among the many two (or three) column layout techniques I sometimes use the following one: <div class="variant1"> <div class="left1"> <div class="left2"> left main content </div> </div> <div class="right1"> <div class="right2"> right sidebar </div> </div> </div> together with: .variant1 .left1 { float: left; margin-right: -200px; width: 100%; } .variant1 .left1 .left2 { margin-right: 200px; } .variant1 .right1 { float: right; width: 200px; } This works in all major browsers. But for some very strange reason exactly the same technique but reversed doesn't work: <div class="variant2"> <div class="left1"> <div class="left2"> left main content </div> </div> <div class="right1"> <div class="right2"> right sidebar </div> </div> </div> with .variant2 .left1 { float: left; width: 200px; } .variant2 .right1 { float: right; margin-left: -200px; width: 100%; } .variant2 .right1 .right2 { margin-left: 200px; } In the second variant all text in the sidebar cannot be selected and all links cannot be clicked. This is at least true for Firefox and Chrome. In IE7 the links can at least be clicked and Opera seems completely fine. Does anyone know the reason for this strange behaviour? Is it a browser bug? Please note: I am not looking for a working two column CSS layout technique, I know there are loads of them. And I don't necessarily need this technique to work. I only like to understand the reason why the second variant behaves like it does. Here is a link to a small test page which should illustrate the problem: http://selfthinker.org/stuff/css_layout_mystery.html

    Read the article

  • What would you do if you just had this code dumped in your lap?

    - by chickeninabiscuit
    Man, I just had this project given to me - expand on this they say. This is an example of ONE function: <?php //500+ lines of pure wonder. function page_content_vc($content) { global $_DBH, $_TPL, $_SET; $_SET['ignoreTimezone'] = true; lu_CheckUpdateLogin(); if($_SESSION['dash']['VC']['switch'] == 'unmanned' || $_SESSION['dash']['VC']['switch'] == 'touchscreen') { if($content['page_name'] != 'vc') { header('Location: /vc/'); die(); } } if($_GET['l']) { unset($_SESSION['dash']['VC']); if($loc_id = lu_GetFieldValue('ID', 'Location', $_GET['l'])) { if(lu_CheckPermissions('vc', $loc_id)) { $timezone = lu_GetFieldValue('Time Zone', 'Location', $loc_id, 'ID'); if(strlen($timezone) > 0) { $_SESSION['time_zone'] = $timezone; } $_SESSION['dash']['VC']['loc_ID'] = $loc_id; header('Location: /vc/'); die(); } } } if($_SESSION['dash']['VC']['loc_ID']) { $timezone = lu_GetFieldValue('Time Zone', 'Location', $_SESSION['dash']['VC']['loc_ID'], 'ID'); if(strlen($timezone) > 0) { $_SESSION['time_zone'] = $timezone; } $loc_id = $_SESSION['dash']['VC']['loc_ID']; $org_id = lu_GetFieldValue('record_ID', 'Location', $loc_id); $_TPL->assign('loc_id', $loc_id); $location_name = lu_GetFieldValue('Location Name', 'Location', $loc_id); $_TPL->assign('LocationName', $location_name); $customer_name = lu_GetFieldValue('Customer Name', 'Organisation', $org_id); $_TPL->assign('CustomerName', $customer_name); $enable_visitor_snap = lu_GetFieldValue('VisitorSnap', 'Location', $loc_id); $_TPL->assign('EnableVisitorSnap', $enable_visitor_snap); $lacps = explode("\n", lu_GetFieldValue('Location Access Control Point', 'Location', $loc_id)); array_walk($lacps, 'trim_value'); if(count($lacps) > 0) { if(count($lacps) == 1) { $_SESSION['dash']['VC']['lacp'] = $lacps[0]; } else { if($_GET['changeLACP'] && in_array($_GET['changeLACP'], $lacps)) { $_SESSION['dash']['VC']['lacp'] = $_GET['changeLACP']; header('Location: /vc/'); die(); } else if(!in_array($_SESSION['dash']['VC']['lacp'], $lacps)) { $_SESSION['dash']['VC']['lacp'] = $lacps[0]; } $_TPL->assign('LACP_array', $lacps); } $_TPL->assign('current_LACP', $_SESSION['dash']['VC']['lacp']); $_TPL->assign('showContractorSearch', true); /* if($contractorStaff = lu_GetTableRow('ContractorStaff', $org_id, 'record_ID', 'record_Inactive != "checked"')) { foreach($contractorStaff['rows'] as $contractor) { $lacp_rights = lu_OrganiseCustomDataFunctionMultiselect($contractor[lu_GetFieldName('Location Access Rights', 'ContractorStaff')]); if(in_array($_SESSION['dash']['VC']['lacp'], $lacp_rights)) { $_TPL->assign('showContractorSearch', true); } } } */ } $selectedOptions = explode(',', lu_GetFieldValue('Included Fields', 'Location', $_SESSION['dash']['VC']['loc_ID'])); $newOptions = array(); foreach($selectedOptions as $selOption) { $so_array = explode('|', $selOption, 2); if(count($so_array) > 1) { $newOptions[$so_array[0]] = $so_array[1]; } else { $newOptions[$so_array[0]] = "Both"; } } if($newOptions[lu_GetFieldName('Expected Length of Visit', 'Visitor')]) { $alert = false; if($visitors = lu_OrganiseVisitors( lu_GetTableRow('Visitor', 'checked', lu_GetFieldName('Checked In', 'Visitor'), lu_GetFieldName('Location for Visit', 'Visitor').'="'.$_SESSION['dash']['VC']['loc_ID'].'" AND '.lu_GetFieldName('Checked Out', 'Visitor').' != "checked"'), false, true, true)) { foreach($visitors['rows'] as $key => $visitor) { if($visitor['expected'] && $visitor['expected'] + (60*30) < time()) { $alert = true; } } } if($alert == true) { $_TPL->assign('showAlert', 'red'); } else { //$_TPL->assign('showAlert', 'green'); } } $_TPL->assign('switch', $_SESSION['dash']['VC']['switch']); if($_SESSION['dash']['VC']['switch'] == 'touchscreen') { $_TPL->assign('VC_unmanned', true); } if($_GET['check'] == 'in') { if($_SESSION['dash']['VC']['switch'] == 'touchscreen') { lu_CheckInTouchScreen(); } else { lu_CheckIn(); } } else if($_GET['check'] == 'out') { if($_SESSION['dash']['VC']['switch'] == 'touchscreen') { lu_CheckOutTouchScreen(); } else { lu_CheckOut(); } } else if($_GET['switch'] == 'unmanned') { $_SESSION['dash']['VC']['switch'] = 'unmanned'; if($_GET['printing'] == true && (lu_GetFieldValue('Printing', 'Location', $_SESSION['dash']['VC']['loc_ID']) != "No" && lu_GetFieldValue('Printing', 'Location', $_SESSION['dash']['VC']['loc_ID']) != "")) { $_SESSION['dash']['VC']['printing'] = true; } else { $_SESSION['dash']['VC']['printing'] = false; } header('Location: /vc/'); die(); } else if($_GET['switch'] == 'touchscreen') { $_SESSION['dash']['VC']['switch'] = 'touchscreen'; if($_GET['printing'] == true && (lu_GetFieldValue('Printing', 'Location', $_SESSION['dash']['VC']['loc_ID']) != "No" && lu_GetFieldValue('Printing', 'Location', $_SESSION['dash']['VC']['loc_ID']) != "")) { $_SESSION['dash']['VC']['printing'] = true; } else { $_SESSION['dash']['VC']['printing'] = false; } header('Location: /vc/'); die(); } else if($_GET['switch'] == 'manned') { if($_POST['password']) { if(md5($_POST['password']) == $_SESSION['dash']['password']) { unset($_SESSION['dash']['VC']['switch']); //setcookie('email', "", time() - 3600); //setcookie('location', "", time() - 3600); header('Location: /vc/'); die(); } else { $_TPL->assign('switchLoginError', 'Incorrect Password'); } } $_TPL->assign('switchLogin', 'true'); } else if($_GET['m'] == 'visitor') { lu_ModifyVisitorVC(); } else if($_GET['m'] == 'enote') { lu_ModifyEnoteVC(); } else if($_GET['m'] == 'medical') { lu_ModifyMedicalVC(); } else if($_GET['print'] == 'label' && $_GET['v']) { lu_PrintLabelVC(); } else { unset($_SESSION['dash']['VC']['checkin']); unset($_SESSION['dash']['VC']['checkout']); $_TPL->assign('icon', 'GroupCheckin'); if($_SESSION['dash']['VC']['switch'] != 'unmanned' && $_SESSION['dash']['VC']['switch'] != 'touchscreen') { $staff_ids = array(); if($staffs = lu_GetTableRow('Staff', $_SESSION['dash']['VC']['loc_ID'], 'record_ID')) { foreach($staffs['rows'] as $staff) { $staff_ids[] = $staff['ID']; } } if($_GET['view'] == "tomorrow") { $dateStart = date('Y-m-d', mktime(0, 0, 0, date("m") , date("d")+1, date("Y"))); $dateEnd = date('Y-m-d', mktime(0, 0, 0, date("m") , date("d")+1, date("Y"))); } else if($_GET['view'] == "month") { $dateStart = date('Y-m-d', mktime(0, 0, 0, date("m"), date("d"), date("Y"))); $dateEnd = date('Y-m-d', mktime(0, 0, 0, date("m"), date("d")+30, date("Y"))); } else if($_GET['view'] == "week") { $dateStart = date('Y-m-d', mktime(0, 0, 0, date("m"), date("d"), date("Y"))); $dateEnd = date('Y-m-d', mktime(0, 0, 0, date("m"), date("d")+7, date("Y"))); } else { $dateStart = date('Y-m-d'); $dateEnd = date('Y-m-d'); } if(lu_GetFieldValue('Enable Survey', 'Location', $_SESSION['dash']['VC']['loc_ID']) == 'checked' && lu_GetFieldValue('Add Survey', 'Location', $_SESSION['dash']['VC']['loc_ID']) == 'checked') { $_TPL->assign('enableSurvey', true); } //lu_GetFieldName('Checked In', 'Visitor') //!= "checked" //date('d/m/Y'), lu_GetFieldName('Date of Visit', 'Visitor') if($visitors = lu_OrganiseVisitors(lu_GetTableRow('Visitor', $_SESSION['dash']['VC']['loc_ID'], lu_GetFieldName('Location for Visit', 'Visitor'), lu_GetFieldName('Checked In', 'Visitor').' != "checked" AND '.lu_GetFieldName('Checked Out', 'Visitor').' != "checked" AND '.lu_GetFieldName('Date of Visit', 'Visitor').' >= "'.$dateStart.'" AND '.lu_GetFieldName('Date of Visit', 'Visitor').' <= "'.$dateEnd.'"'))) { foreach($visitors['days'] as $day => $visitors_day) { foreach($visitors_day['rows'] as $key => $visitor) { $visitors['days'][$day]['rows'][$key]['visiting'] = lu_GetTableRow('Staff', $visitor['record_ID'], 'ID'); $visitors['days'][$day]['rows'][$key]['visiting']['notify'] = $_DBH->getRow('SELECT * FROM lu_notification WHERE ent_ID = "'.$visitor['record_ID'].'"'); } } //array_dump($visitors); $_TPL->assign('visitors', $visitors); } if($_GET['conGroup']) { if($_GET['action'] == 'add') { $_SESSION['dash']['VC']['conGroup'][$_GET['conGroup']] = $_GET['conGroup']; } else { unset($_SESSION['dash']['VC']['conGroup'][$_GET['conGroup']]); } } if(count($_SESSION['dash']['VC']['conGroup']) > 0) { if($conGroupResult = lu_GetTableRow('ContractorStaff', '1', '1', ' ID IN ('.implode(',', $_SESSION['dash']['VC']['conGroup']).')')) { if($_POST['_submit'] == 'Check-In Group >>') { $form = lu_GetForm('VisitorStandard'); $standarddata = array(); foreach($form['items'] as $key=>$item) { $standarddata[$key] = $_POST[lu_GetFieldName($item['name'], 'Visitor')]; } foreach($conGroupResult['rows'] as $conStaff) { $data = $standarddata; foreach($form['items'] as $key=>$item) { if($key != 'ID' && $key != 'record_ID' && $conStaff[lu_GetFieldName(lu_GetNameField($key, 'Visitor'), 'ContractorStaff')]) { $data[$key] = $conStaff[lu_GetFieldName(lu_GetNameField($key, 'Visitor'), 'ContractorStaff')]; } } $data['record_ID'] = $data[lu_GetFieldName('Visiting', 'Visitor')]; $data[lu_GetFieldName('Date of Visit', 'Visitor')] = date('Y-m-d'); $data[lu_GetFieldName('Time of Visit', 'Visitor')] = date('H:i'); $data[lu_GetFieldName('Checked In', 'Visitor')] = 'checked'; $data[lu_GetFieldName('Location for Visit', 'Visitor')] = $_SESSION['dash']['VC']['loc_ID']; $data[lu_GetFieldName('ConStaff ID', 'Visitor')] = $conStaff['ID']; $data[lu_GetFieldName('From', 'Visitor')] = lu_GetFieldValue('Legal Name', 'Contractor', $conStaff[lu_GetFieldName('Contractor', 'ContractorStaff')]); $id = lu_UpdateData($form, $data); lu_VisitorCheckIn($id); //array_dump($data); //array_dump($id); } unset($_SESSION['dash']['VC']['conGroup']); header('Location: /vc/'); die(); } if(count($conGroupResult['rows'])) { foreach($conGroupResult['rows'] as $key => $cstaff) { $conGroupResult['rows'][$key]['contractor'] = lu_GetTableRow('Contractor', $cstaff[lu_GetFieldName('Contractor', 'ContractorStaff')], 'ID'); } $_TPL->assign('conGroupResult', $conGroupResult); } $conGroupForm = lu_GetForm('VisitorConGroup'); $conGroupForm = lu_OrganiseVisitorForm($conGroupForm, $_SESSION['dash']['VC']['loc_ID'], 'Contractor'); $secure_options_array = lu_GetSecureOptions($org_id); if($secure_options_array[$_SESSION['dash']['VC']['loc_ID']]) { $conGroupForm['items'][lu_GetFieldName('Secure Area', 'Visitor')]['options']['values'] = $secure_options_array[$_SESSION['dash']['VC']['loc_ID']]; $conGroupForm['items'][lu_GetFieldName('Secure Area', 'Visitor')]['name'] = 'Secure Area'; } else { unset($conGroupForm['items'][lu_GetFieldName('Secure Area', 'Visitor')]); } if($secure_options_array) { $form['items'][lu_GetFieldName('Secure Area', 'Visitor')]['options']['values'] = $secure_options_array; $form['items'][lu_GetFieldName('Secure Area', 'Visitor')]['name'] = 'Secure Area'; } else { unset($form['items'][lu_GetFieldName('Secure Area', 'Visitor')]); } $_TPL->assign('conGroupForm', $conGroupForm); $_TPL->assign('hideFormCancel', true); } } if($_GET['searchVisitors']) { $_TPL->assign('searchVisitorsQuery', $_GET['searchVisitors']); $where = ''; if($_GET['searchVisitorsIn'] == 'Yes') { $where .= ' AND '.lu_GetFieldName('Checked In', 'Visitor').' = "checked"'; $_TPL->assign('searchVisitorsIn', 'Yes'); } else { $where .= ' AND '.lu_GetFieldName('Checked In', 'Visitor').' != "checked"'; $_TPL->assign('searchVisitorsIn', 'No'); } if($_GET['searchVisitorsOut'] == 'Yes') { $where = ''; $where .= ' AND '.lu_GetFieldName('Checked Out', 'Visitor').' = "checked"'; $_TPL->assign('searchVisitorsOut', 'Yes'); } else { $where .= ' AND '.lu_GetFieldName('Checked Out', 'Visitor').' != "checked"'; $_TPL->assign('searchVisitorsOut', 'No'); } if($searchVisitors = lu_OrganiseVisitors(lu_GetTableRow('Visitor', $_GET['searchVisitors'], '#search#', lu_GetFieldName('Location for Visit', 'Visitor').'="'.$_SESSION['dash']['VC']['loc_ID'].'"'.$where))) { foreach($searchVisitors['rows'] as $key => $visitor) { $searchVisitors['rows'][$key]['visiting'] = lu_GetTableRow('Staff', $visitor['record_ID'], 'ID'); } $_TPL->assign('searchVisitors', $searchVisitors); } else { $_TPL->assign('searchVisitorsNotFound', true); } } else if($_GET['searchStaff']) { if($_POST['staff_id']) { if(lu_CheckPermissions('staff', $_POST['staff_id'])) { $_DBH->query('UPDATE '.lu_GetTableName('Staff').' SET '.lu_GetFieldName('Current Location', 'Staff').' = "'.$_POST['current_location'].'" WHERE ID="'.$_POST['staff_id'].'"'); } } $locations = lu_GetTableRow('Location', $org_id, 'record_ID'); if(count($locations['rows']) > 1) { $_TPL->assign('staffLocations', $locations); } $loc_ids = array(); foreach($locations['rows'] as $location) { $loc_ids[] = $location['ID']; } // array_dump($locations); // array_dump($_POST); $_TPL->assign('searchStaffQuery', $_GET['searchStaff']); $where = ' AND record_Inactive != "checked"'; if($_GET['searchStaffIn'] == 'Yes' && $_GET['searchStaffOut'] != 'Yes') { $where .= ' AND ('.lu_GetFieldName('Staff Status', 'Staff').' = "" OR '.lu_GetFieldName('Staff Status', 'Staff').' = "On-Site")'. $_TPL->assign('searchStaffIn', 'Yes'); $_TPL->assign('searchStaffOut', 'No'); } else if($_GET['searchStaffOut'] == 'Yes' && $_GET['searchStaffIn'] != 'Yes') { $where .= ' AND ('.lu_GetFieldName('Staff Status', 'Staff').' != "" AND '.lu_GetFieldName('Staff Status', 'Staff').' != "On-Site")'. $_TPL->assign('searchStaffOut', 'Yes'); $_TPL->assign('searchStaffIn', 'No'); } else { $_TPL->assign('searchStaffOut', 'Yes'); $_TPL->assign('searchStaffIn', 'Yes'); } if($searchStaffs = lu_GetTableRow('Staff', $_GET['searchStaff'], '#search#', 'record_ID IN ('.implode(',', $loc_ids).')'.$where, lu_GetFieldName('First Name', 'Staff').','.lu_GetFieldName('Surname', 'Staff'))) { $_TPL->assign('searchStaffs', $searchStaffs); } else { $_TPL->assign('searchStaffNotFound', true); } } else if($_GET['searchContractor']) { $_TPL->assign('searchContractorQuery', $_GET['searchContractor']); //$where = ' AND '.lu_GetTableName('ContractorStaff').'.record_Inactive != "checked"'; $where = ' '; if($_GET['searchContractorIn'] == 'Yes' && $_GET['searchContractorOut'] != 'Yes') { $where .= ' AND ('.lu_GetFieldName('Onsite Status', 'ContractorStaff').' = "Onsite")'; $_TPL->assign('searchContractorIn', 'Yes'); $_TPL->assign('searchContractorOut', 'No'); } else if($_GET['searchContractorOut'] == 'Yes' && $_GET['searchContractorIn'] != 'Yes') { $where .= ' AND ('.lu_GetFieldName('Onsite Status', 'ContractorStaff').' != "Onsite")'. $_TPL->assign('searchContractorOut', 'Yes'); $_TPL->assign('searchContractorIn', 'No'); } else { $_TPL->assign('searchContractorOut', 'Yes'); $_TPL->assign('searchContractorIn', 'Yes'); } $join = 'LEFT JOIN '.lu_GetTableName('Contractor').' ON '.lu_GetTableName('Contractor').'.ID = '.lu_GetTableName('ContractorStaff').'.'.lu_GetFieldName('Contractor', 'ContractorStaff'); $extrasearch = array ( lu_GetTableName('Contractor').'.'.lu_GetFieldName('Legal Name', 'Contractor') ); if($searchContractorResult = lu_GetTableRow('ContractorStaff', $_GET['searchContractor'], '#search#', lu_GetTableName('ContractorStaff').'.record_ID = "'.$org_id.'" '.$where, lu_GetFieldName('First Name', 'ContractorStaff').','.lu_GetFieldName('Surname', 'ContractorStaff'), $join, $extrasearch)) { /* foreach($searchContractorResult['rows'] as $key=>$contractor) { $lacp_rights = lu_OrganiseCustomDataFunctionMultiselect($contractor[lu_GetFieldName('Location Access Rights', 'ContractorStaff')]); if(!in_array($_SESSION['dash']['VC']['lacp'], $lacp_rights)) { unset($searchContractorResult['rows'][$key]); } } */ if(count($searchContractorResult['rows'])) { foreach($searchContractorResult['rows'] as $key => $cstaff) { /* if($cstaff[lu_GetFieldName('Onsite_Status', 'Contractor')] == 'Onsite')) { if($visitor['rows'][0][lu_GetFieldName('ConStaff ID', 'Visitor')]) { $_DBH->query('UPDATE '.lu_GetTableName('ContractorStaff').' SET '.lu_GetFieldName('Onsite Status', 'ContractorStaff').' = "" WHERE ID="'.$visitor['rows'][0][lu_GetFieldName('ConStaff ID', 'Visitor')].'"'); } } */ if($cstaff[lu_GetFieldName('SACN Expiry Date', 'ContractorStaff')] != '0000-00-00') { if(strtotime($cstaff[lu_GetFieldName('SACN Expiry Date', 'ContractorStaff')]) < time()) { $searchContractorResult['rows'][$key]['sacn_expiry'] = true; } else { $searchContractorResult['rows'][$key]['sacn_expiry'] = false; } } else { $searchContractorResult['rows'][$key]['sacn_expiry'] = false; } if($cstaff[lu_GetFieldName('Induction Valid Until', 'ContractorStaff')] != '0000-00-00') { if(strtotime($cstaff[lu_GetFieldName('Induction Valid Until', 'ContractorStaff')]) < time()) { $searchContractorResult['rows'][$key]['induction_expiry'] = true; } else { $searchContractorResult['rows'][$key]['induction_expiry'] = false; } } else { $searchContractorResult['rows'][$key]['induction_expiry'] = false; } $searchContractorResult['rows'][$key]['contractor'] = lu_GetTableRow('Contractor', $cstaff[lu_GetFieldName('Contractor', 'ContractorStaff')], 'ID'); } $_TPL->assign('searchContractorResult', $searchContractorResult); } else { $_TPL->assign('searchContractorNotFound', true); } } else { $_TPL->assign('searchContractorNotFound', true); } } $occupancy = array(); $occupancy['staffNumber'] = $_DBH->getOne('SELECT count(*) FROM '.lu_GetTableName('Staff').' WHERE record_ID = "'.$_SESSION['dash']['VC']['loc_ID'].'" AND record_Inactive != "checked" AND '.lu_GetFieldName('Ignore Counts', 'Staff').' != "checked"'); $occupancy['staffNumberOnsite']= $_DBH->getOne( 'SELECT count(*) FROM '.lu_GetTableName('Staff').' WHERE ( (record_ID = "'.$_SESSION['dash']['VC']['loc_ID'].'" AND ('.lu_GetFieldName('Staff Status', 'Staff').' = "" OR '.lu_GetFieldName('Staff Status', 'Staff').' = "On-Site")) OR '.lu_GetFieldName('Current Location', 'Staff').' = "'.$_SESSION['dash']['VC']['loc_ID'].'") AND record_Inactive != "checked" AND '.lu_GetFieldName('Ignore Counts', 'Staff').' != "checked"'); $occupancy['visitorsOnsite'] = $_DBH->getOne('SELECT count(*) FROM '.lu_GetTableName('Visitor').' WHERE '.lu_GetFieldName('Location for Visit', 'Visitor').' = "'.$_SESSION['dash']['VC']['loc_ID'].'" AND '.lu_GetFieldName('Checked In', 'Visitor').' = "checked" AND '.lu_GetFieldName('Checked Out', 'Visitor').' != "checked"'); $_TPL->assign('occupancy', $occupancy); if($enotes = lu_GetTableRow('Enote', $org_id, 'record_ID', lu_GetFieldName('Note Emailed', 'Enote').' = "0000-00-00" AND '.lu_GetFieldName('Note Passed On', 'Enote').' != "Yes"')) { $_TPL->assign('EnoteNotice', true); } if($medical = lu_GetTableRow('MedicalRoom', $_SESSION['dash']['VC']['loc_ID'], 'record_ID', 'record_Inactive != "Yes"')) { $_TPL->assign('MedicalNotice', true); } if(lu_GetFieldValue('Printing', 'Location', $_SESSION['dash']['VC']['loc_ID']) != "No" && lu_GetFieldValue('Printing', 'Location', $_SESSION['dash']['VC']['loc_ID']) != "") { $_TPL->assign('UnmannedPrinting', true); } } else { if($_SESSION['dash']['VC']['printing'] == true) { $_TPL->assign('UnmannedPrinting', true); } } // enable if contractor check-in buttons should be enabled if(lu_GetFieldValue('Enable Contractor Check In', 'Location', $_SESSION['dash']['VC']['loc_ID']) == "checked") { $_TPL->assign('ContractorCheckin', true); } } if($_SESSION['dash']['entity_id'] && $_GET['fixupCon'] == 'true') { $conStaffs = lu_GetTableRow('ContractorStaff', $_SESSION['dash']['ModifyConStaffs']['org_ID'], 'record_ID', '', lu_GetFieldName('First Name', 'ContractorStaff').','.lu_GetFieldName('Surname', 'ContractorStaff')); foreach($conStaffs['rows'] as $key => $cstaff) { if($cstaff[lu_GetFieldName('Site Access Card Number', 'ContractorStaff')] && $cstaff[lu_GetFieldName('Site Access Card Type', 'ContractorStaff')]) { echo $cstaff['ID'].' '; $_DBH->query('UPDATE '.lu_GetTableName('Visitor').' SET '.lu_GetFieldName('Site Access Card Number', 'Visitor').' = "'.$cstaff[lu_GetFieldName('Site Access Card Number', 'ContractorStaff')].'", '.lu_GetFieldName('Site Access Card Type', 'Visitor').' = "'.$cstaff[lu_GetFieldName('Site Access Card Type', 'ContractorStaff')].'" WHERE '.lu_GetFieldName('ConStaff ID', 'Visitor').'="'.$cstaff['ID'].'"'); } } } } else { if($_SESSION['dash']['staffs']) { foreach($_SESSION['dash']['staffs']['rows'] as $staff) { if($staff[lu_GetFieldName('Reception Manager', 'Staff')] == 'checked') { $loc_id = $staff['record_ID']; unset($_SESSION['dash']['VC']); if($loc_id = lu_GetFieldValue('ID', 'Location', $loc_id)) { $_SESSION['dash']['VC']['loc_ID'] = $loc_id; header('Location: /vc/'); die(); } } } } $_TPL->assign('mode', 'public'); } $content['page_content'] = $_TPL->fetch('modules/vc.htm'); return $content; } ?> die();die();die();die();die(); This question will probably be closed - i just need some support from my coding brothers and sisters. *SOB*

    Read the article

  • Config for WCF with multiple endpoints

    - by vdh_ant
    Hi guys I'm new to WCF and am trying to get some ideas I have off the ground. Basically I have a web WCF Application project with the following in its web.config: <system.serviceModel> <services> <service name="WcfService1.ServiceContract.IDirectorySearchService" behaviorConfiguration="defaultServiceBehavior"> <endpoint name="restxml" address="xml" binding="webHttpBinding" contract="WcfService1.ServiceContract.IDirectorySearchServiceXml" behaviorConfiguration="xmlRestBehavior"/> <endpoint name="restjson" address="json" binding="webHttpBinding" contract="WcfService1.ServiceContract.IDirectorySearchServiceJson" behaviorConfiguration="jsonRestBehavior"/> <endpoint name="soap" address="soap" binding="basicHttpBinding" contract="WcfService1.ServiceContract.IDirectorySearchService"/> <endpoint name="mex" address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/> </service> </services> <behaviors> <serviceBehaviors> <behavior name="defaultServiceBehavior"> <serviceDebug includeExceptionDetailInFaults="true"/> </behavior> </serviceBehaviors> <endpointBehaviors> <behavior name="xmlRestBehavior"> <webHttp/> </behavior> <behavior name="jsonRestBehavior"> <enableWebScript/> </behavior> </endpointBehaviors> </behaviors> </system.serviceModel> My interfaces look like this: [ServiceContract] public interface IDirectorySearchServiceXml { [OperationContract] [WebGet(UriTemplate = "Search/")] SearchResults Search(); } [ServiceContract] public interface IDirectorySearchServiceJson { [OperationContract] [WebGet(UriTemplate = "Search/")] SearchResults Search(); } [ServiceContract] public interface IDirectorySearchService { [OperationContract] SearchResults Search(int? sportId, int? instituteId, DateTime? startDate, DateTime? endDate); } Now the part I am having a little trouble with is what else I need to get this up and running... Like given this what .svc files do I need and do I have the config right... Also what addresses do I need to use to get this running either through the browser or through the WCF test client. Note I am currently using 3.5. Cheers Anthony

    Read the article

  • General advice and guidelines on how to properly override object.GetHashCode()

    - by Svish
    According to MSDN, a hash function must have the following properties: If two objects compare as equal, the GetHashCode method for each object must return the same value. However, if two objects do not compare as equal, the GetHashCode methods for the two object do not have to return different values. The GetHashCode method for an object must consistently return the same hash code as long as there is no modification to the object state that determines the return value of the object's Equals method. Note that this is true only for the current execution of an application, and that a different hash code can be returned if the application is run again. For the best performance, a hash function must generate a random distribution for all input. I keep finding myself in the following scenario: I have created a class, implemented IEquatable<T> and overridden object.Equals(object). MSDN states that: Types that override Equals must also override GetHashCode ; otherwise, Hashtable might not work correctly. And then it usually stops up a bit for me. Because, how do you properly override object.GetHashCode()? Never really know where to start, and it seems to be a lot of pitfalls. Here at StackOverflow, there are quite a few questions related to GetHashCode overriding, but most of them seems to be on quite particular cases and specific issues. So, therefore I would like to get a good compilation here. An overview with general advice and guidelines. What to do, what not to do, common pitfalls, where to start, etc. I would like it to be especially directed at C#, but I would think it will work kind of the same way for other .NET languages as well(?). I think maybe the best way is to create one answer per topic with a quick and short answer first (close to one-liner if at all possible), then maybe some more information and end with related questions, discussions, blog posts, etc., if there are any. I can then create one post as the accepted answer (to get it on top) with just a "table of contents". Try to keep it short and concise. And don't just link to other questions and blog posts. Try to take the essence of them and then rather link to source (especially since the source could disappear. Also, please try to edit and improve answers instead of created lots of very similar ones. I am not a very good technical writer, but I will at least try to format answers so they look alike, create the table of contents, etc. I will also try to search up some of the related questions here at SO that answers parts of these and maybe pull out the essence of the ones I can manage. But since I am not very stable on this topic, I will try to stay away for the most part :p

    Read the article

  • gwt-RPC problem! what is the best practice on using gwt-RPC?

    - by guaz
    Dear all, I want draw a chart based on the date retrieve from the database by using RPC. But everytime I fail to get the result. My rpc function is working. I think is the sequence of the process. below is my class: public class TrafficPattern_1 extends GChart { TrafficPattern_1() { final DBServiceAsync dbService = GWT .create(DBService.class); dbService.SendData(null, null, new AsyncCallback<Container_TrafficPattern>() { @Override public void onFailure(Throwable caught) { } @Override public void onSuccess(Container_TrafficPattern result) { // TODO Auto-generated method stub pContainer.SetaDate(result.aDate.get(1)); } }); pContainer.aDate.get(0); setChartSize(350, 200); setChartTitle("<h2>Temperature vs Time<h2>"); setPadding("8px"); //setPixelSize(380, 200); getXAxis().setAxisLabel("<small><b><i>Time</i></b></small>"); getXAxis().setHasGridlines(true); getXAxis().setTickCount(6); // Except for "=(Date)", a standard GWT DateTimeFormat string getXAxis().setTickLabelFormat("=(Date)h:mm a"); getYAxis().setAxisLabel("<small><b><i>&deg;C</i></b></small>"); getYAxis().setHasGridlines(true); getYAxis().setTickCount(11); getYAxis().setAxisMin(11); getYAxis().setAxisMax(16); addCurve(); getCurve().setLegendLabel("<i> </i>"); getCurve().getSymbol().setBorderColor("blue"); getCurve().getSymbol().setBackgroundColor("blue"); // getCurve().getSymbol().setFillSpacing(10); // getCurve().getSymbol().setFillThickness(3); getCurve().getSymbol().setSymbolType(SymbolType.LINE); getCurve().getSymbol().setFillThickness(2); getCurve().getSymbol().setFillSpacing(1); for (int i = 0; i < dateSequence.length; i++) // Note that getTime() returns milliseconds since // 1/1/70--required whenever "date cast" tick label // formats (those beginning with "=(Date)") are used. getCurve().addPoint(dateSequence[i].date.getTime(), dateSequence[i].value); }

    Read the article

  • Which functions in the C standard library commonly encourage bad practice?

    - by Ninefingers
    Hello all, This is inspired by this question and the comments on one particular answer in that I learnt that strncpy is not a very safe string handling function in C and that it pads zeros, until it reaches n, something I was unaware of. Specifically, to quote R.. strncpy does not null-terminate, and does null-pad the whole remainder of the destination buffer, which is a huge waste of time. You can work around the former by adding your own null padding, but not the latter. It was never intended for use as a "safe string handling" function, but for working with fixed-size fields in Unix directory tables and database files. snprintf(dest, n, "%s", src) is the only correct "safe strcpy" in standard C, but it's likely to be a lot slower. By the way, truncation in itself can be a major bug and in some cases might lead to privilege elevation or DoS, so throwing "safe" string functions that truncate their output at a problem is not a way to make it "safe" or "secure". Instead, you should ensure that the destination buffer is the right size and simply use strcpy (or better yet, memcpy if you already know the source string length). And from Jonathan Leffler Note that strncat() is even more confusing in its interface than strncpy() - what exactly is that length argument, again? It isn't what you'd expect based on what you supply strncpy() etc - so it is more error prone even than strncpy(). For copying strings around, I'm increasingly of the opinion that there is a strong argument that you only need memmove() because you always know all the sizes ahead of time and make sure there's enough space ahead of time. Use memmove() in preference to any of strcpy(), strcat(), strncpy(), strncat(), memcpy(). So, I'm clearly a little rusty on the C standard library. Therefore, I'd like to pose the question: What C standard library functions are used inappropriately/in ways that may cause/lead to security problems/code defects/inefficiencies? In the interests of objectivity, I have a number of criteria for an answer: Please, if you can, cite design reasons behind the function in question i.e. its intended purpose. Please highlight the misuse to which the code is currently put. Please state why that misuse may lead towards a problem. I know that should be obvious but it prevents soft answers. Please avoid: Debates over naming conventions of functions (except where this unequivocably causes confusion). "I prefer x over y" - preference is ok, we all have them but I'm interested in actual unexpected side effects and how to guard against them. As this is likely to be considered subjective and has no definite answer I'm flagging for community wiki straight away. I am also working as per C99.

    Read the article

  • Python - calculate multinomial probability density functions on large dataset?

    - by Seafoid
    Hi, I originally intended to use MATLAB to tackle this problem but the inbuilt functions has limitations that do not suit my goal. The same limitation occurs in NumPy. I have two tab-delimited files. The first is a file showing amino acid residue, frequency and count for an in-house database of protein structures, i.e. A 0.25 1 S 0.25 1 T 0.25 1 P 0.25 1 The second file consists of quadruplets of amino acids and the number of times they occur, i.e. ASTP 1 Note, there are 8,000 such quadruplets. Based on the background frequency of occurence of each amino acid and the count of quadruplets, I aim to calculate the multinomial probability density function for each quadruplet and subsequently use it as the expected value in a maximum likelihood calculation. The multinomial distribution is as follows: f(x|n, p) = n!/(x1!*x2!*...*xk!)*((p1^x1)*(p2^x2)*...*(pk^xk)) where x is the number of each of k outcomes in n trials with fixed probabilities p. n is 4 four in all cases in my calculation. I have created three functions to calculate this distribution. # functions for multinomial distribution def expected_quadruplets(x, y): expected = x*y return expected # calculates the probabilities of occurence raised to the number of occurrences def prod_prob(p1, a, p2, b, p3, c, p4, d): prob_prod = (pow(p1, a))*(pow(p2, b))*(pow(p3, c))*(pow(p4, d)) return prob_prod # factorial() and multinomial_coefficient() work in tandem to calculate C, the multinomial coefficient def factorial(n): if n <= 1: return 1 return n*factorial(n-1) def multinomial_coefficient(a, b, c, d): n = 24.0 multi_coeff = (n/(factorial(a) * factorial(b) * factorial(c) * factorial(d))) return multi_coeff The problem is how best to structure the data in order to tackle the calculation most efficiently, in a manner that I can read (you guys write some cryptic code :-)) and that will not create an overflow or runtime error. To data my data is represented as nested lists. amino_acids = [['A', '0.25', '1'], ['S', '0.25', '1'], ['T', '0.25', '1'], ['P', '0.25', '1']] quadruplets = [['ASTP', '1']] I initially intended calling these functions within a nested for loop but this resulted in runtime errors or overfloe errors. I know that I can reset the recursion limit but I would rather do this more elegantly. I had the following: for i in quadruplets: quad = i[0].split(' ') for j in amino_acids: for k in quadruplets: for v in k: if j[0] == v: multinomial_coefficient(int(j[2]), int(j[2]), int(j[2]), int(j[2])) I haven'te really gotten to how to incorporate the other functions yet. I think that my current nested list arrangement is sub optimal. I wish to compare the each letter within the string 'ASTP' with the first component of each sub list in amino_acids. Where a match exists, I wish to pass the appropriate numeric values to the functions using indices. Is their a better way? Can I append the appropriate numbers for each amino acid and quadruplet to a temporary data structure within a loop, pass this to the functions and clear it for the next iteration? Thanks, S :-)

    Read the article

  • Moose and error messages, the sun and the moon [closed]

    - by xxxxxxx
    So again using Moose I write a role like this: package My::Role; use Moose::Role; use Some::Class::Consuming::My::Role; With the note that Some::Class::Consuming::My::Role consumes the role My::Role; And what do I get ? I get an error message like this: A role generator is required to generate roles at /usr/local/share/perl/5.10.0/MooseX/Role/Parameterized/Meta/Role/Parameterizable.pm line 79 MooseX::Role::Parameterized::Meta::Role::Parameterizable::generate_role('MooseX::Role::Parameterized::Meta::Role::Parameterizable=HASH...', 'consumer', 'Moose::Meta::Class=HASH(0x894e540)', 'parameters', 'HASH(0x86fc1e0)') called at /usr/local/share/perl/5.10.0/MooseX/Role/Parameterized/Meta/Role/Parameterizable.pm line 116 MooseX::Role::Parameterized::Meta::Role::Parameterizable::apply('MooseX::Role::Parameterized::Meta::Role::Parameterizable=HASH...', 'Moose::Meta::Class=HASH(0x894e540)', 'element_type', 'Tuple') called at /usr/local/lib/perl/5.10.0/Moose/Util.pm line 132 Moose::Util::_apply_all_roles('Moose::Meta::Class=HASH(0x894e540)', undef, 'Stuff', 'HASH(0x894e1d0)') called at /usr/local/lib/perl/5.10.0/Moose/Util.pm line 86 Moose::Util::apply_all_roles('Moose::Meta::Class=HASH(0x894e540)', 'Stuff', 'HASH(0x894e1d0)') called at /usr/local/lib/perl/5.10.0/Moose.pm line 57 Moose::with('Moose::Meta::Class=HASH(0x894e540)', 'Group', 'HASH(0x894e1d0)') called at /usr/local/lib/perl/5.10.0/Moose/Exporter.pm line 293 Moose::with('Group', 'HASH(0x894e1d0)') called at Some_path_on_disk line 6 require Some_other_path_on_disk called at Some_path_on_disk line 9 Group::BEGIN() called at Yet_another_path_on_disk line 0 eval {...} called at Yet_another_path_on_disk line 0 Compilation failed in require at some_path_on_disk line 9. BEGIN failed--compilation aborted at some_path_on_disk line 9. What am I to make of this ? As Dijkstra would concisely describe, this looks like "just a meaningless concatenation of words"(which is exactly what it is). Would a more appropriate error message be "You cannot use a class consuming the role that you are currently defining " ? What does the error message try to convey ? Can the author make the error message meaningful ? Will he ever make it so ? maybe this can be planned for version 3.14159265358979323846 ? In actuality I get one and a half pages of error which is completely unreadable and devoid of any logic or sense of respect for the user that is using Moose (in terms of intuitive error messages) just like the one above. What's to be done in this case ? I mean I get on my screen these error messages that are sometimes completely unrelated to the problem that I'm having (which I can assess after solving the problems that probably caused them, I say probably becuase I have no idea where these error messages came from because they look like they fell from the sky as they have no relation to the actual situation). Is this: the inexplicable dramatic destiny of the Perl programmer using Moose ? someone being extremely lazy and sloppy at writing error messages ? maybe on heavy drugs ? me not understanding basic english ? Gentlemen, when writing software, please please please, take care of the poor programmer that will use it and respect him by writing relevant error messages. (Except for error messages Moose is a pretty good piece of software)

    Read the article

  • How to stop UITableView moveRowAtIndexPath from leaving blank rows upon reordering

    - by coneybeare
    I am having an issue where in reordering my UITableViewCells, the tableView is not scrolling with the cell. Only a blank row appears and any subsequent scrolling gets an Array out of bounds error without any of my code in the Stack Trace. Here is a quick video of the problem. Here is the relevant code: - (BOOL)tableView:(UITableView *)tableView canEditRowAtIndexPath:(NSIndexPath *)indexPath { return indexPath.section == 1; } - (BOOL)tableView:(UITableView *)tableView canMoveRowAtIndexPath:(NSIndexPath *)indexPath { BOOL ret = indexPath.section == 1 && indexPath.row < self.count; DebugLog(@"canMoveRowAtIndexPath: %d:%d %@", indexPath.section, indexPath.row, (ret ? @"YES" : @"NO")); return ret; } - (void)delayedUpdateCellBackgroundPositionsForTableView:(UITableView *)tableView { [self performSelectorOnMainThread:@selector(updateCellBackgroundPositionsForTableView:) withObject:tableView waitUntilDone:NO]; } - (void)tableView:(UITableView *)tableView moveRowAtIndexPath:(NSIndexPath *)fromIndexPath toIndexPath:(NSIndexPath *)toIndexPath { if (fromIndexPath.row == toIndexPath.row) return; DebugLog(@"Moved audio from %d:%d to %d:%d", fromIndexPath.section, fromIndexPath.row, toIndexPath.section, toIndexPath.row); NSMutableArray *audio = [self.items objectAtIndex:fromIndexPath.section]; [audio exchangeObjectAtIndex:fromIndexPath.row withObjectAtIndex:toIndexPath.row]; [self performSelector:@selector(delayedUpdateCellBackgroundPositionsForTableView:) withObject:tableView afterDelay:kDefaultAnimationDuration/3]; } And here is the generated Stack Trace of the crash: Exception Type: EXC_BREAKPOINT (SIGTRAP) Exception Codes: 0x0000000000000002, 0x0000000000000000 Crashed Thread: 0 Dispatch queue: com.apple.main-thread Application Specific Information: iPhone Simulator 3.2 (193.3), iPhone OS 3.0 (7A341) *** Terminating app due to uncaught exception 'NSRangeException', reason: '*** -[NSCFArray removeObjectsInRange:]: index (6) beyond bounds (6)' Thread 0 Crashed: Dispatch queue: com.apple.main-thread 0 CoreFoundation 0x302ac924 ___TERMINATING_DUE_TO_UNCAUGHT_EXCEPTION___ + 4 1 libobjc.A.dylib 0x93cb2509 objc_exception_throw + 56 2 CoreFoundation 0x3028e5fb +[NSException raise:format:arguments:] + 155 3 CoreFoundation 0x3028e55a +[NSException raise:format:] + 58 4 Foundation 0x305684e9 _NSArrayRaiseBoundException + 121 5 Foundation 0x30553a6e -[NSCFArray removeObjectsInRange:] + 142 6 UIKit 0x30950105 -[UITableView(_UITableViewPrivate) _updateVisibleCellsNow] + 862 7 UIKit 0x30947715 -[UITableView layoutSubviews] + 250 8 QuartzCore 0x0090bd94 -[CALayer layoutSublayers] + 78 9 QuartzCore 0x0090bb55 CALayerLayoutIfNeeded + 229 10 QuartzCore 0x0090b3ae CA::Context::commit_transaction(CA::Transaction*) + 302 11 QuartzCore 0x0090b022 CA::Transaction::commit() + 292 12 QuartzCore 0x009132e0 CA::Transaction::observer_callback(__CFRunLoopObserver*, unsigned long, void*) + 84 13 CoreFoundation 0x30245c32 __CFRunLoopDoObservers + 594 14 CoreFoundation 0x3024503f CFRunLoopRunSpecific + 2575 15 CoreFoundation 0x30244628 CFRunLoopRunInMode + 88 16 GraphicsServices 0x32044c31 GSEventRunModal + 217 17 GraphicsServices 0x32044cf6 GSEventRun + 115 18 UIKit 0x309021ee UIApplicationMain + 1157 19 XXXXXXXX 0x0000278a main + 104 (main.m:12) 20 XXXXXXXX 0x000026f6 start + 54 NOte that the array out of bounds length is not the length of my elements (I have 9), but always something smaller. I have been trying to solve this for many hours days without avail… any ideas? UPDATE: More code as requested In my delegate: - (UITableViewCellEditingStyle)tableView:(UITableView *)tableView editingStyleForRowAtIndexPath:(NSIndexPath *)indexPath { return UITableViewCellEditingStyleNone; } - (NSIndexPath *)tableView:(UITableView *)tableView targetIndexPathForMoveFromRowAtIndexPath:(NSIndexPath *)sourceIndexPath toProposedIndexPath:(NSIndexPath *)proposedDestinationIndexPath { int count = [(UAPlaylistEditDataSource *)self.dataSource count]; if (proposedDestinationIndexPath.section == 0) { return [NSIndexPath indexPathForRow:0 inSection:sourceIndexPath.section]; }else if (proposedDestinationIndexPath.row >= count) { return [NSIndexPath indexPathForRow:count-1 inSection:sourceIndexPath.section]; } return proposedDestinationIndexPath; } …thats about it. I am using the three20 framework and I have not had any issues with reordering till now. The problem is also not in the updateCellBackgroundPositionsForTableView: method as it still crashes when this is commented out.

    Read the article

  • Node.js + Express.js. How to RENDER less css?

    - by Paden
    Hello all, I am unable to render less css in my express workspace. Here is my current configuration (my css/less files go in 'public/stylo/'): app.configure(function() { app.set('views' , __dirname + '/views' ); app.set('partials' , __dirname + '/views/partials'); app.set('view engine', 'jade' ); app.use(express.bodyDecoder() ); app.use(express.methodOverride()); app.use(express.compiler({ src: __dirname + '/public/stylo', enable: ['less']})); app.use(app.router); app.use(express.staticProvider(__dirname + '/public')); }); Here is my main.jade file: !!! html(lang="en") head title Yea a title link(rel="stylesheet", type="text/css", href="/stylo/main.less") link(rel="stylesheet", href="http://fonts.googleapis.com/cssfamily=Droid+Sans|Droid+Sans+Mono|Ubuntu|Droid+Serif") script(src="https://ajax.googleapis.com/ajax/libs/jquery/1.4.4/jquery.min.js") script(src="https://ajax.googleapis.com/ajax/libs/jqueryui/1.8.7/jquery-ui.min.js") body!= body here is my main.less css: @import "goodies.css"; body { .googleFont; background-color : #000000; padding : 20px; margin : 0px; > .header { border-bottom : 1px solid #BBB; background-color : #f0f0f0; margin : -25px -25px 30px -25px; /* important */ color : #333; padding : 15px; font-size : 18pt; } } AND here is my goodies.less css: .rounded_corners(@radius: 10px) { -moz-border-radius : @radius; -webkit-border-radius: @radius; border-radius : @radius; } .shadows(@rad1: 0px, @rad2: 1px, @rad3: 3px, @color: #999) { -webkit-box-shadow : @rad1 @rad2 @rad3 @color; -moz-box-shadow : @rad1 @rad2 @rad3 @color; box-shadow : @rad1 @rad2 @rad3 @color; } .gradient (@type: linear, @pos1: left top, @pos2: left bottom, @color1: #f5f5f5, @color2: #ececec) { background-image : -webkit-gradient(@type, @pos1, @pos2, from(@color1), to(@color2)); background-image : -moz-linear-gradient(@color1, @color2); } .googleFont { font-family : 'Droid Serif'; } Cool deal. Now: I have installed less via npm and I had heard from another post that @imports should reference the .css not the .less. In any case, I have tried the combinations of switching .less for .css in the jade and less files with no success. If you can help or have the solution I'd greatly appreciate it. Note: The jade portion works fine if I enter any ol' .css. Note2: The less compiles if I use lessc via command line.

    Read the article

  • javascript arrays and type conversion inconsistencies

    - by ForYourOwnGood
    I have been playing with javascript arrays and I have run into, what I feel, are some inconsistencies, I hope someone can explain them for me. Lets start with this: var myArray = [1, 2, 3, 4, 5]; document.write("Length: " + myArray.length + "<br />"); for( var i in myArray){ document.write( "myArray[" + i + "] = " + myArray[i] + "<br />"); } document.write(myArray.join(", ") + "<br /><br />"); Length: 5 myArray[0] = 1 myArray[1] = 2 myArray[2] = 3 myArray[3] = 4 myArray[4] = 5 1, 2, 3, 4, 5 There is nothing special about this code, but I understand that a javascript array is an object, so properities may be add to the array, the way these properities are added to an array seems inconsistent to me. Before continuing, let me note how string values are to be converted to number values in javascript. Nonempty string - Numeric value of string or NaN Empty string - 0 So since a javascript array is an object the following is legal: myArray["someThing"] = "someThing"; myArray[""] = "Empty String"; myArray["4"] = "four"; for( var i in myArray){ document.write( "myArray[" + i + "] = " + myArray[i] + "<br />"); } document.write(myArray.join(", ") + "<br /><br />"); Length: 5 myArray[0] = 1 myArray[1] = 2 myArray[2] = 3 myArray[3] = 4 myArray[4] = four myArray[someThing] = someThing myArray[] = Empty String 1, 2, 3, 4, four The output is unexpected. The non empty string "4" is converted into its numeric value when setting the property myArray["4"], this seems right. However the empty string "" is not converted into its numeric value, 0, it is treated as an empty string. Also the non empty string "something" is not converted to its numeric value, NaN, it is treated as a string. So which is it? is the statement inside myArray[] in numeric or string context? Also, why are the two, non numeric, properities of myArray not included in myArray.length and myArray.join(", ")?

    Read the article

  • How can I pass a reference to another control as an IValueConverter parameter?

    - by MKing
    I am binding some business objects to a WPF ItemsControl. They are displayed using a custom IValueConverter implementation used to produce the Geometry for a Path object in the DataTemplate as shown here: <ItemsControl x:Name="Display" Background="White" HorizontalAlignment="Stretch" VerticalAlignment="Stretch" ItemsSource="{Binding ElementName=ViewPlaneSelector, Path=SelectedItem.VisibleElements}" > <ItemsControl.Resources> <!-- This object is just used to get around the fact that ConverterParameter can't be a binding directly (it's not a DependencyProperty on a DependencyObject --> <this:GeometryConverterData x:Key="ConverterParameter2" Plane="{Binding ElementName=ViewPlaneSelector, Path=SelectedItem}" /> <DataTemplate DataType="{x:Type o:SlenderMember}"> <Path Stroke="Blue" StrokeThickness=".5" Data='{Binding Converter={StaticResource SlenderMemberConverter}, ConverterParameter={StaticResource ConverterParameter2}}' ToolTip="{Binding AsString}"> </Path> </DataTemplate> </ItemsControl.Resources> </ItemsControl> Note that the items for the ItemsControl are drawn from the ViewPlaneSelector (a ComboBox) SelectedItem.VisibleElements property. I need that same ViewPlaneSelector.SelectedItem in the SlenderMemberConverter to figure out how to display this element. I'm trying to get a reference to it into the converter by creating the intermediate GeometryConverterData object in the Resources section. This object exists solely to get around the problem of not being able to bind directly to the ConverterParameter property (as mentioned in the comments). Here is the code for the GeometryDataConverter class: class GeometryConverterData : FrameworkElement { public static readonly DependencyProperty PlaneProperty = DependencyProperty.Register("Plane", typeof(ViewPlane), typeof(GeometryConverterData), null, ValidValue); public static bool ValidValue(object o){ return true; } public ViewPlane Plane { get{ return GetValue(PlaneProperty) as ViewPlane; }set{ SetValue(PlaneProperty, value); } } } I added the ValidValue function for debugging, to see what this property was getting bound it. It only and always gets set to null. I know that the ViewPlaneSelector.SelectedItem isn't always null since the ItemsControl has items, and it's items are drawn from the same property on the same object... so what gives? How can I get a reference to this ComboBox into my ValueConverter. Or, alternately, why is what I'm doing silly and overly complicated. I'm as guilty as many of sometimes getting it into my head that something has to be done a certain way and then killing myself to make it happen when there's a much cleaner and simpler solution.

    Read the article

  • Default Database Collations got messed up

    - by dominicdinada
    I am using Ubuntu 9.10 with XAMPP ( Lampp "MYSQL 5.1.45 PHPMYADMIN 3.3.1 PHP 5.3.2 ) What my problem is, is that I set up my testing env to debug my scripts locally and when I did so there arose a problem. This problem is that I used firefox's addon SQLinject ME to test for weakness' and upon doing so it caused mysql to change the default local collations; character sets dir /opt/lampp/share/mysql/charsets/ collation connection latin1_general_ci (Global value) latin1_swedish_ci collation database latin1_swedish_ci collation server latin1_swedish_ci I have searched for quite sometime in regards to a solution to this problem and have come up with searching for the db.opt file which stores this information without success. Upon not finding a solution I removed lampp with the "sudo rm -fR /opt" command and reinstall and the problem still persists. I have tried to change the collations manually and still come up with the database displaying latin1_swedish_ci as the default language. Why is this a problem?? Why is it a problem with mysql? Because the application I am testing and debugging locally is built on the CodeIgnitor with Smarty framework and since this combination of framework is built to detect the LOCALES, Rather what the database defaults are I keep getting errors saying no language file for swedish...... Of course I could get the swedish language file to work around this problem but I do not feel the need to make this work around a perminant solution as with time when I move on to projects I will run into simular problems every time that A; When importing database files, backups etc it will default to import such databases as the locale swedish. B; As time passes on I might completly forget of this error and will be back to square one. I have found this code in searches for a fix,which seems to alter the tables to a desired Collaion; $value) { mysql_query("ALTER TABLE $value COLLATE latin1_general_ci"); }} echo "The collation of your database has been successfully changed!"; ? Which is handy to switch collations in One Schema at a time however this is not a fix when a framework doesnt care that the said database is in one langugae. It tests for the Default of the entire server. Someone with any knowledge of a purge or fix to this I would greatly appricate the help. One more final note is that when I was testing I only figured to back up the applications DataBase and not the entire Schema of the install. No matter if I uninstall or reinstall the database still seems to carry these problems.

    Read the article

  • DynamicMethod for ConstructorInfo.Invoke, what do I need to consider?

    - by Lasse V. Karlsen
    My question is this: If I'm going to build a DynamicMethod object, corresponding to a ConstructorInfo.Invoke call, what types of IL do I need to implement in order to cope with all (or most) types of arguments, when I can guarantee that the right type and number of arguments is going to be passed in before I make the call? Background I am on my 3rd iteration of my IoC container, and currently doing some profiling to figure out if there are any areas where I can easily shave off large amounts of time being used. One thing I noticed is that when resolving to a concrete type, ultimately I end up with a constructor being called, using ConstructorInfo.Invoke, passing in an array of arguments that I've worked out. What I noticed is that the invoke method has quite a bit of overhead, and I'm wondering if most of this is just different implementations of the same checks I do. For instance, due to the constructor matching code I have, to find a matching constructor for the predefined parameter names, types, and values that I have passed in, there's no way this particular invoke call will not end up with something it should be able to cope with, like the correct number of arguments, in the right order, of the right type, and with appropriate values. When doing a profiling session containing a million calls to my resolve method, and then replacing it with a DynamicMethod implementation that mimics the Invoke call, the profiling timings was like this: ConstructorInfo.Invoke: 1973ms DynamicMethod: 93ms This accounts for around 20% of the total runtime of this profiling application. In other words, by replacing the ConstructorInfo.Invoke call with a DynamicMethod that does the same, I am able to shave off 20% runtime when dealing with basic factory-scoped services (ie. all resolution calls end up with a constructor call). I think this is fairly substantial, and warrants a closer look at how much work it would be to build a stable DynamicMethod generator for constructors in this context. So, the dynamic method would take in an object array, and return the constructed object, and I already know the ConstructorInfo object in question. Therefore, it looks like the dynamic method would be made up of the following IL: l001: ldarg.0 ; the object array containing the arguments l002: ldc.i4.0 ; the index of the first argument l003: ldelem.ref ; get the value of the first argument l004: castclass T ; cast to the right type of argument (only if not "Object") (repeat l001-l004 for all parameters, l004 only for non-Object types, varying l002 constant from 0 and up for each index) l005: newobj ci ; call the constructor l006: ret Is there anything else I need to consider? Note that I'm aware that creating dynamic methods will probably not be available when running the application in "reduced access mode" (sometimes the brain just won't give up those terms), but in that case I can easily detect that and just calling the original constructor as before, with the overhead and all.

    Read the article

< Previous Page | 496 497 498 499 500 501 502 503 504 505 506 507  | Next Page >