Search Results

Search found 15021 results on 601 pages for 'absolutely free'.

Page 501/601 | < Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508  | Next Page >

• How to remove Media Center from Windows 8

  - by Arabella

  I bought 2 Windows 8 upgrades, 1 for my PC and 1 for my notebook. I added Windows Media Center to my notebook using the free offer in November (side note: the key was emailed to me within 5 minutes, I see many people have been complaining that it takes a few days). Today I decided to add WMC to my PC as well, so I went onto the Microsoft website, same like last time, and I received the email within a few minutes. Once I added WMC, entered the key and the computer rebooted, my activation is now broken: This product key is already being used on another PC. Try a different key or buy a new one. After rereading the product key email, I realised that the WMC key was exactly the same as the one I had received in November for my notebook (I used the same email, i.e. my Microsoft account Outlook email, for both). I didn't think this would be a problem, as on Microsoft's feature pack page it states: ...is limited to five licenses per customer per promotion. So then I decided, I'll just remove WMC from my PC and go back to Windows 8 Pro. So I turned off the WMC feature, PC restarted, activation still broken because my key has been replaced. I then tried to activate it with my original Pro key. The error it gave was that this key cannot be used with this version of Windows, as it is now Windows 8 Pro with Media Center and not Windows 8 Pro anymore. I've searched a bit and it seems the only way to remove it is do a clean install. I tried the Windows 8 Downgrade Helper, which told me I was already running Win 8 Pro when I tried to downgrade, and that I was running Win 8 Pro with Media center when I tried the other option. To sum up: How do I remove Windows Media Center from Windows 8 Pro without having to do a clean install?

  Read the article

• How can I automatically synchronize a directory tree on multiple machines?

  - by Blacklight Shining

  I have two Mac laptops and a Debian server, each with a directory that I would like to keep in sync between the three. The solution should meet the following criteria (in rough order of importance): It must not use any third-party service (e.g. Dropbox, SugarSync, Google whatever). This does not include installing additional software (as long as it's free). It must not require me to use specific directories or change my way of storing things. (Dropbox does this IIRC) It must work in all directions (changes made on /any/ machine should be pushed to the others) All data sent must be encrypted (I have ssh keypairs set up already) It must work even when not all machines are available (changes should be pushed to a machine when it comes back online) It must work even when the /directories/ on some machines are not available (they may be stored on disk images which will not always be mounted) This can be solved for Macs by using launchd to automatically launch and kill (or in some way change the behavior of) whatever daemon is used for syncing when the images are mounted and unmounted. It must be immediate (using an event-based system, not a periodic one like cron) It must be flexible (if more machines are added, I should be able to incorporate them easily) I also have some preferences that I would like to be fulfilled, but do not have to be: It should notify me somehow if there are conflicts or other errors. It should recognize symbolic and hard links and create corresponding ones. It should allow me to create a list of exceptions (subdirectories which will not be synced at all). It should not require me to set up port forwarding or otherwise reconfigure a network. This can be solved by using an ssh tunnel with reverse port forwarding. If you have a solution that meets some, but not all of the criteria, please contribute it in the comments as it might be useful in some way, and it might be possible to meet some of the criteria separately. What I tried, and why it didn't work: rsync and lsyncd do not support bidirectional synchronization csync2 is designed for server clusters and does not appear to work with machines with dynamic IPs DRBD (suggested by amotzg) involves installing a kernel module and does not appear to work on systems running OS X

  Read the article

• How do I permanently delete /var/log/lastlog?

  - by GregB

  My /var/log/lastlog file is huge. I know it's really only a few kilobytes, but tar isn't smart enough to know that, so when I image a virtual machine, my restore fails because it thinks I'm trying to load more data than I have capacity on my disk. I want to delete /var/log/lastlog and stop any and all logging to the file. I'm aware of the security implications. This logging needs to stop to preserve my backup strategy. I've made a change to /etc/pam.d/login which I was told would disable logging to /var/log/lastlog, but it does not appear to work as /var/log/lastlog keeps growing. # Prints the last login info upon succesful login # (Replaces the `LASTLOG_ENAB' option from login.defs) #session optional pam_lastlog.so Any ideas? EDIT For anyone interested, I use Centrify Express to authenticate my users via LDAP. Centrify Express is "free", but one of the drawbacks is that I can't manage user UIDs via LDAP, so they are given a dynamic UID when they login to a server. Centrify picks some crazy high UID values (so they don't conflict with local users on the server, presumably). /var/log/lastlog is indexed by UID, and grows to accommodate the largest UID on the system. This means that when a Centrify user logs in, they get a UID in the upper-end of the UID range, which causes lastlog to allocate an obscene amount of space, according to the file system. ~$ ll /var/log/lastlog -rw-rw-r-- 1 root root 291487675780 Apr 10 16:37 /var/log/lastlog ~$ du -h /var/log/lastlog 20K /var/log/lastlog More Into --- Sparse Files

  Read the article

• Industrial strength cloud file storage

  - by ArthurG

  I'm looking for an industrial strength cloud file storage system. It will be used by multiple people in a startup. Our requirements: Transparent file system access: files and folders in the file system must be able transparently access (read and write) files in the cloud; files must be synchronized whenever network access is available and buffered otherwise. The system must be usable by non-technical people. Access control: we need to control who can access which files, at least on a very coarse basis. e.g., the developers will be able to access the system design documents, only the corporate folks can access recruiting documents, and only management can access certain corporate documents. Dropbox provides this via Sharing folders, but that's not adequate, if I understand it correctly, because there's no authentication of the sharing user. so the cloud service should have a notion of an account (our startup) with multiple users with distinct credentials and rights for each user Clients: it must be accessible from Macs and PCs; I would hope that it supports Linux (e.g., Ubuntu) too Security: it must provide robust security Backup: the cloud service must reliably backup the files Versioning: change version history, is a big plus, but not required Not free: we're willing to pay for the service So far, we've reviewed the following, albeit not completely thoroughly: Dropbox: has all except 1) Access control, which is provided via Sharing folders, but that's not adequate, if I understand it correctly, because there's no authentication of the sharing user. and 2) Security, as discussed here http://www.economist.com/blogs/babbage/2011/05/internet_security and here http://blog.dropbox.com/?p=821. Windows Live Mesh, has all except 1) Clients, only supporting Windows 7 and OS X. SpiderOak has all, except 1) Transparent file system access, which is only available for 1 user. Amazon Cloud, doesn't offer 1) Transparent file system access Rackspace Cloud Drive has all except 1) Access control and 2) Versioning I'll gladly include any clarifications or additional systems the community provides. Arthur

  Read the article

• How do I prevent a tar pipe from causing swapping?

  - by Jeff Shattock

  I have a rather large filesystem that I need to transfer from one Linux server to another. I figured the best way to do this was via a tar/netcat pipe arrangment, something like tar c . | pv | nc blah blah blah And it works great, the network stays fairly saturated, life is good. Until the source machine starts swapping. The files are on a raid on the source system, so the read speed is much faster than the write speed on the other end. Since the dest machine hasnt picked up the data yet, the source machine needs to stick it somewhere, so into RAM it goes, until there is no more free RAM. It then starts swapping, which is horribly painful since that machine has its OS installed on a somewhat slow CF card. Both machines have 4GB of physical ram, 64 bit Ubuntu 9.04 server. GigE link between them. How do I prevent this swapping? Can I put a "speed-limit" on the tar or netcat process so that the transfer speed doesn't overwhelm the write throughput on the destination end? The man pages didn't list anything, but there might be something I'm overlooking.

  Read the article

• Looking for issue tracker software for residential property management

  - by Rob

  This question is about a computer software (as per SU guidelines) application for centrally tracking issues concerning the management of a residental block of flats (apartments as they say in the US and France). Issues are incidents - and their resultant unplanned maintenance to address them, also planned one-off maintenance and also regular planned routine maintenance. I live in a block of flats (apartments), and along with other residents, are looking to more closely watch over issues with the communal, shared areas of the premises (corridors, courtyards, stairs, lifts, lights, trash/bin shed, bike stands, parking areas etc) and their maintenance, currently done by a property management company. Our own homes are our own affair internally, its the outside communal areas that I have the interest. The aim being to control costs and possibly reduce them, by proactively managing the property using historical data to predict issues and also to scrutinise maintenance charges against such data to ensure that the costs are as expected. Trending could also be established whereby recurrences of things can be detected and pre-empted to reduce costs. As a software professional, I'm aware of Bugzilla, eventum being free tools for software - which could be customised to fit this application, but wondered if there was something more appropriate. It might be useful for such software to be on a web server, with secure access, so that residents can log in and view the issues.

  Read the article

• Installing Windows 7 from a USB Hard Drive.

  - by Mark Tomlin

  I have a Western Digital Passport External Hard Drive (320GB) that I want to partition to keep the data on, but use some of the free space to install Windows 7 onto my desktop computer. Microsoft has given me the Windows 7 Enterprise Edition ISO to download. I would like to take the External HD and partition it so I can fit the ISO image onto it. How would I go about doing this? Trying to use GParted to partition the external hard drive has caused a chicken or the egg problem. GParted can't see the drive unless it's mounted, and when it is mounted it will not allow me to do anything to the partition. When it's not mounted, GParted can't see the drive at all and as such can't do anything to the drive. Once the drive is correctly partition, how do I go about moving the ISO image Microsoft gave me to my USB External Hard Drive? Are there any special steps that I need to take? I am using Ubuntu 11.04 & GParted 0.7.0, on my Chromebook to do this. Any support would be appreciated.

  Read the article

• How to go about rotating logs which are arbitrary named and placed in deeply nested directories?

  - by Roman Grazhdan

  I have a couple of hosts which are basically a playground for developers. On these hosts, each of them has a directory under /tmp where he is free to do all he wants - store files, write logs etc. Of course, the logs are to be rotated, or else the disc will be 100% full in a week. The files can be plenty, but I've dealt with it with paths like /tmp/[a-e]*/* and so on and lived happily for a while, but as they try new cool stuff on the machine logrotate rules grow ugly and unmanageable, and it's getting more difficult to understand which files hit the glob. Also, logrotate would segfault if asked to rotate a socket. I don't feel like trying to enforce some naming policies in that environment, I think it's going to take quite a lot of time and get people annoyed and still would fail at some point. And I still need to manage the logs, not just rm the dirs at night. So is it a good idea in circumstances like these to write a script which would handle these temporary files? I prefer sticking with standard utilities whenever possible, but here I think logrotate is getting less and less manageable. And probably someone heard of some logrotate alternatives which would work well in such an environment? I don't need emailing logs or some other advanced features, so theoretically some well commented find | xargs would do. P.S. I do have a log aggregator but this stuff is not going to touch my little cute logstash machine.

  Read the article

• Access server using IP on another interface

  - by Markos

  I am using Windows Server 2012 instead of a router for my home network. Currently I am using RRAS and computers from local network can access Internet correctly. Here is a map of the current setup: [PC1] ---| |---- (lan ip)[Server](wan ip)--> internet [PC2] ---| I have applications running on Server, such as IIS and others. All can be accessed from internet using wan ip and from lan using lan ip. I have a domain, lets say its my-domain.com, which is resolved to my wan ip. What I want is to enable my LAN computers to be able to connect to services on my server using the very same address as internet users: eg http://my-domain.com/. However this does not work for my lan computers. What I understand is that I need to set up some kind of loopback route in a way that packets comming to LAN interface get routed to WAN interface. But I haven't found how to achieve this (in fact, I don't know WHAT to search for). Feel free to ask for additional informations and I will try to update the question.

  Read the article

• VMware Workstation "Power off" and "Suspend" buttons are disabled. What is going on?

  - by Ed Norris

  I've been using an XP image for a few months now with no problems. Recently the power off and resume buttons were disabled and I'm not sure what happened to cause that. In addition, the menu items to do those functions are grayed out (like VM | Power | Power Off) I'm using VMware Workstation 6.5.3 on a Windows 7 64-bit host. The image is Windows XP 32-bit. There is plenty of free space and memory on the host and the CPU is not pegged. I am able to power off the image through its Start menu, but that's a workaround not a fix. Any suggestions? TIA EDIT: Well after manually shutting down the image then closing and reopening the image file (which I've done before) in preparation for reinstalling the tools as suggested below, it looks fine. The power off and suspend buttons are enabled and work. So what do I do with this question now? "Close and restart a few times and it may work" doesn't seem useful...

  Read the article

• Massive number of context switches on ksoftirqd

  - by Pace

  We have two servers that are grinding to a halt. One is a VM and the other is bare metal. Neither of them are running similar code but they are on the same network. It appears that an incredible number of context switches are arising from ksoftirqd (which is taking up a lot of CPU). vmstat output procs -----------memory---------- ---swap-- -----io---- -system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 1 0 0 605092 182496 2637556 0 0 0 0 4177 519187 8 19 73 0 0 2 0 0 605092 182496 2637556 0 0 0 0 4792 520980 8 19 74 0 0 3 0 0 605092 182496 2637552 0 0 0 0 2137 659640 18 26 56 0 0 ... pidstat output TCK4-BM-06A:~ # pidstat -w -I 5 Linux 2.6.32.12-0.7-default (TCK4-BM-06A) 07/02/2012 _x86_64_ 03:03:01 PM PID cswch/s nvcswch/s Command 03:03:06 PM 1 0.20 0.00 init 03:03:06 PM 4 386666.27 0.00 ksoftirqd/0 03:03:06 PM 6 0.60 0.00 ksoftirqd/1 03:03:06 PM 8 378213.17 0.00 ksoftirqd/2 03:03:06 PM 10 0.20 0.00 ksoftirqd/3 03:03:06 PM 12 0.20 0.00 ksoftirqd/4 03:03:06 PM 26 377115.37 0.00 ksoftirqd/11 03:03:06 PM 27 1.80 0.00 events/0 03:03:06 PM 28 1.00 0.00 events/1 03:03:06 PM 29 1.00 0.00 events/2 03:03:06 PM 30 1.00 0.00 events/3 03:03:06 PM 31 0.80 0.00 events/4 03:03:06 PM 32 0.80 0.00 events/5 ... My initial thought is that, since both are on the same network, something is flooding the network. Is this consistent with the data?

  Read the article

• How to recover my invisible HD again?

  - by pattulus

  I made this several times now, but this time something bad happened. What I did: I installed Windows 7 at a 32GB partition on my slot 2 HD in my MacPro. Windows 7 made a 105MB partition… I knew this before, but what I didn’t know was that this partition is now on my slot 4 HD. My home folder, my private videos and some other stuff are on this 1TB drive. What I found out so far: I’m currently logged in as another admin since my OS partition as well as the two other HD's aren't harmed. Disk Utility: … only shows the 105MB NTSF partition on this 1TB volume. It isn’t showing my old 1TB partition/ex-HD named "storehouse". Only the partition tab is telling me that there now is a 1TB empty free unpartitioned space. Data Rescue II: … is showing the Volume as it used to be with it's old Name "storehouse". A quick scan and a thorough scan both were done in 1 second which leds me to the conclusion that there's isn’t something deleted at all (» hope!). Data Rescue doesn’t even mention the damn "system reserved" partition. Drive Genius: … also shows the old partition and doesn’t mention the new one. But looking at the info it tells me under "content": FDisk_partition_scheme (instead of Apple_partition_scheme). Well D'oh…. Tech Tools: … doesn’t show the volume, otherwise I'd might have been tempted to press rebuild/repair. What to do next?? I think the best approach is to buy another 1TB HD and let Disk Warrior Clone my old one to it… just to be on the safe side. But what is the best thing to do after this… ???

  Read the article

• Use GRUB/GRUB2 to PXE boot OS image

  - by Jack

  Asked this in stackoverflow but they recommended I post this here: Here is the situation I am in: I currently have a Windows drive that boots XP. The BIOS does not support PXE booting so this is out of the question. Therefore, I was thinking I could install a customized GRUB bootloader on it instead such that it will have the option to PXE boot an image from a DHCP server connected to it and have the option to load Windows as it normally does (two items in menu). The catch is it may need to be automated (meaning no keyboard), so is there any way to run a script pre-boot during GRUB loading that determines if DHCP / TFTP servers are running and attempt to PXE boot an image from the network (and if not, say timeout of 10 seconds, regularly boot from Windows drive)? If this is not possible, what are some other options / suggestions? I was reading up on grub4dos as well but I'm not sure that is what I need. FWIW, I'm free to do whatever I want to the drive. I'd really appreciate some help on this as I'm not sure where to start. Thanks!

  Read the article

• Recommended Win2k8 Server software to fix my RAID-0 issue

  - by Jason Kealey

  I'm running an Asus P6T V2 Deluxe. It has six SATA ports and supports onboard RAID. I am using two of those ports for a RAID0 array of 1.5TB Seagate drives using the onboard RAID controller. One of them is giving me SMART warnings and I want to preemptively replace it. I pulled out two other 1.5TB drives from another computer and am ready to use one or both, if necessary. I can't run any SMART diagnostic software from within Windows because it only sees the hardware RAID-0 array, not each individual drive. The first thing I tried was a slow sector-by-sector copy using a free tool called EASEUS Disk Copy. Used the bootdisk, copied (took like 16 hours), unplugged the defective drive and plugged the new one in its place. The motherboard didn't recognize the new drive as being part of the known setup, so it did not want to boot. The second thing I tried was using other software (I forget the name) to copy the partition from within Windows. The first software failed because I had a server operating system. I found another software (I forget the name) which supported a server OS and did a partition copy onto the new drive. This seemed to work and the OS started to boot, but blue screened and started a reboot cycle. I'm assuming the software I was using was no good as it was trying to copy the boot disk while it was in use. I am looking for recommendations on what software to use to fix my problem without doing a re-install. Everything is backed up but my computer works fine and I'd like to avoid re-installation when possible. However, my system would be back up now if I had just started over on a second RAID array. :)

  Read the article

• Almost All Xenserver Logical Volumes Disappeared - Recovery?

  - by Alex

  We had a hard disc crash of one of two hard discs in a software raid with a LVM on top. The server is running Citrix xenserver. On the hard disk which is still intact, the volume group gets detected well, but only one LV is left. (some hashes replaced by "x") # lvdisplay --- Logical volume --- LV Name /dev/VG_XenStorage-x-x-x-x-408b91acdcae/MGT VG Name VG_XenStorage-x-x-x-x-408b91acdcae LV UUID x-x-x-x-x-x-vQmZ6C LV Write Access read/write LV Status available # open 0 LV Size 4.00 MiB Current LE 1 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 root@rescue ~ # vgdisplay --- Volume group --- VG Name VG_XenStorage-x-x-x-x-408b91acdcae System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 0 Max PV 0 Cur PV 1 Act PV 1 VG Size 698.62 GiB PE Size 4.00 MiB Total PE 178848 Alloc PE / Size 1 / 4.00 MiB Free PE / Size 178847 / 698.62 GiB VG UUID x-x-x-x-x-x-53w0kL I could understand if a full physical volume is lost - but why only the logical volumes? Is there any explanation for this? Is there any way to recover the logical volumes? EDIT We are here in a rescue system. The problem is that the whole server does not boot (GRUB error 22) What we are trying to do is to access the root filesystem. But everything was in the LVM. We have only this: (parted) print Model: ATA SAMSUNG HD753LJ (scsi) Disk /dev/sdb: 750GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 750GB 750GB primary boot, lvm And this 750GB LVM volume is exactly what we see on top. edit2 Output of vgcfgrestore, but from the rescue system, as there is no root to chroot to. # vgcfgrestore --list VG_XenStorage-x-b4b0-x-x-408b91acdcae File: /etc/lvm/archive/VG_XenStorage-x-x-x-x-408b91acdcae_00000.vg VG name: VG_XenStorage-x-x-x-x-408b91acdcae Description: Created *before* executing '/sbin/vgscan --ignorelockingfailure --mknodes' Backup Time: Fri Jun 28 23:53:20 2013 File: /etc/lvm/backup/VG_XenStorage-x-x-x-x-408b91acdcae VG name: VG_XenStorage-x-x-x-x-408b91acdcae Description: Created *after* executing '/sbin/vgscan --ignorelockingfailure --mknodes' Backup Time: Fri Jun 28 23:53:20 2013

  Read the article

• NFS-shared file-system is locking up

  - by fredden

  Our NFS-shared file-system is locking up. Please feel free to ask any questions you feel relevant. :) At the time, there are a lot of processes in "disk sleep" state, and the load averages on our machines sky-rocket. The machines are responsive on SSH, but our the majority of our websites (apache+mod_php) just hang, as does our email system (exim+dovecot). Any websites which don't require write access to the file-system continue to operate. The load averages continue to rise until some kind of time-out is reached, but for at least 10-15 minutes. I've seen load averages over 800, yet the machines are still responsive for actions which don't require writing to the shared file-system. I've been investigating a variety of options, which have all turned out to be red-herrings: nagios, proftpd, bind, cron tasks. I'm seeing these messages in the file server's system log: Jul 30 09:37:17 fs0 kernel: [1810036.560046] statd: server localhost not responding, timed out Jul 30 09:37:17 fs0 kernel: [1810036.560053] nsm_mon_unmon: rpc failed, status=-5 Jul 30 09:37:17 fs0 kernel: [1810036.560064] lockd: cannot monitor node2 Jul 30 09:38:22 fs0 kernel: [1810101.384027] statd: server localhost not responding, timed out Jul 30 09:38:22 fs0 kernel: [1810101.384033] nsm_mon_unmon: rpc failed, status=-5 Jul 30 09:38:22 fs0 kernel: [1810101.384044] lockd: cannot monitor node0 Software involved: VMWare, Debian lenny (64bit), ancient Red Hat (32 bit) (version 7 I believe), Debian etch (32bit) NFS, apache2+mod_php, exim, dovecot, bind, amanda, proftpd, nagios, cacti, drbd, heartbeat, keepalived, LVS, cron, ssmtp, NIS, svn, puppet, memcache, mysql, postgres Joomla!, Magento, Typo3, Midgard, Symfony, custom php apps

  Read the article

• Extending ext4 partition on debian7.0 on vsphere

  - by VoidPointer

  I have allocated thin provisioning of 15GB when i found 8GB as insufficient. Now debian guest is not able to recognize the change of size. root@debian7-x64:~# lvdisplay --- Logical volume --- LV Path /dev/debian7-x64/root LV Name root VG Name debian7-x64 LV UUID EU6mg0-XTXC-ci3D-bQJi-7XN6-r8Hp-SYxcj0 LV Write Access read/write LV Creation host, time debian7-x64, 2013-06-25 12:02:49 +0530 LV Status available # open 1 LV Size 7.39 GiB Current LE 1892 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 254:0 --- Logical volume --- LV Path /dev/debian7-x64/swap_1 LV Name swap_1 VG Name debian7-x64 LV UUID xDNtoz-tJUq-M5D6-GGCN-gzcD-fwUv-fYYDR1 LV Write Access read/write LV Creation host, time debian7-x64, 2013-06-25 12:02:49 +0530 LV Status available # open 2 LV Size 376.00 MiB Current LE 94 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 254:1 root@debian7-x64:~# pvdisplay --- Physical volume --- PV Name /dev/sda5 VG Name debian7-x64 PV Size 7.76 GiB / not usable 2.00 MiB Allocatable yes (but full) PE Size 4.00 MiB Total PE 1986 Free PE 0 Allocated PE 1986 PV UUID SehkzH-Gq8Y-jI2f-27Tb-uv1Z-tR1R-5OnTxR root@debian7-x64:~# sfdisk -s /dev/sda: 15728640 /dev/mapper/debian7--x64-root: 7749632 /dev/mapper/debian7--x64-swap_1: 385024 total: 23863296 blocks Help me to extend this partition. No problem in rebooting. I dont have any live CD. Environment : debian 7, with lvm, on vsphere, ext4 partition. Can provide more details when needed.

  Read the article

• Soundtest works, but no other sounds and windows starts very slowly

  - by Kristian Kari

  So suddenly all sounds on my computer stopped working expect the sound test works, but when I go to control panel and audio it says there's no audio device. And audio players and audio on website doesn't work either. and Also windows starts very slowly. I'm not sure if this helps but I'll tell what happened before this. I downloaded this program from a little shady website, I hesitated and for a good reason I guess cos the moment I finished downloading it, my antivir detected it as unwanted program and put it on quarantine. I thought everything was fine, but had some problems with program (won't go to details about it cos it's not really related to audio) so rebooted the computer and I was suprised that windows started really really slowly. It took like 5 mins to load the desktop such. After that I noticed the sounds were missing, I immediately deleted the program since I thought it was causing the problem. But it didn't change much. I tried to find the solution with no success and now I'm just scanning again my computer. I'd be thankful if anyone would be able to help me. I might have left a thing or ten things out, so feel free to ask. oh and I'm using windows xp

  Read the article

• Multiple Settings for One Monitor

  - by Lynda

  I have my monitor set to the way I like it, it shows colors accurately and not overly bright (white doesn't blind me). However I edit photos for the web and this is great for my screen but I have noticed when looking at other screens my photos will at times looked washed out and not a good presentation. If I manually change my monitor settings to be brighter (and a few other tweaks) I can replicate the look of other monitors close enough to help prevent washed out/blown out photos. Here is the issue, I need to be able to change settings between the two fairly easily. To manually set my monitor for one then back to the other can be time consuming and a pain to set right every time. I would like to be able to preset certain settings (in software) that I can quickly switch between by pressing hotkeys or clicking shortcut on my desktop. I have an AMD video card and have attempted to use the AMD VISION Engine Control Center to add presets then tweak the settings for each. However when I switch between the presets the settings are the same. How do I build presets using the VISION Engine Control Center that actually works (maybe I misunderstand what it is saving?) or is there a way to do this in Windows 7 or free software that actually works decently for this purpose?

  Read the article

• Windows 7 Paging file apparently not being used

  - by Daniel F.

  I'm running Windows 7 Home Premium 32bit on a mobo with 24GB RAM. Of those 24GB, 20GB are assigned as a RAMDISK via ASRock XFastRAM. This RAMDISK has the drive letter X assigned to it. On X:\ I'm storing the temporary files folder, as well as pagefile.sys. Pagefile.sys has 6GB of size. The X:\ has usually around 14GB free space, so the temporary files are negligible, it's mostly the browsers which are storing their caches on there. Now my issue is that Firefox is crashing a lot on me, no error message pops up, but I know that this is because it's out of memory. I could kind of live with that, but now that I switched from using Eclipse to Android Studio, I know that I'm in trouble, because Java isn't capable of allocating, and Android Studio, together with the Java instances it launches, is quite a memory hog. So I tried to figure out what's wrong, and apparently Windows isn't swapping out memory onto the paging file. While my applications are crashing (firefox) / not starting (java vm's), the paging file is only using constantly around 15% of its size (checked with the performance monitor). 15% equals to 1GB aprox. I know that the correct solution would be to switch to 64 bit Windows, but I had to use the 32 bit version because of driver issues which I had about two years ago, and I guess that I'll have them again if I reformat and install the 64 bit version. Also, the machine is running quite stable, the only issue is the memory, so I'd like to use it as it is (as the apps are installed and configured) Is there a way to make Windows use the paging file more efficiently? None of my processes require more than 1GB, I'd just like it to swap out some seldomly used stuff, like GoogleCrashHandler.exe and stuff like that in order to have "more physical memory avaliable". Is that possible?

  Read the article

• email attachments [closed]

  - by Alan Doolan

  My company currently use software on a local machine that will take an email from the email server, extract the attachment, rename it and then add it to a folder on a webserver using ftp. This works well but they are currently asking if it can be done 'in the cloud' or what they really mean, not local. Is there any thing that would do this on the server itself? I should clarify a bit. The attachements are various reports that are being sent to different email addresses (mostly google corporate and free accounts). We need the reports to be on a folder on a webserver so that internal pages can take the information in the reports (csv) and use it on the webpages or adds them to a separate database. The key part being that the files need to be in the particular folders. Though it does work to have a computer running software that will take the files, renames them to the required name and uploads them to the folder it relies too heavily on one computer working all the time. This is not something we can depend on at this point. I'll be honest, I'm a web developer and not strong with server systems past my particular standard requirements so this is beyond me. though yes, I am aware that my boss is not 100% sure what 'cloud' means but likes the word.

  Read the article

• Windows based development environment: HyperV, VMWare, or VirtualBox on development machine?

  - by bleepzter

  I am a software engineer with a little bit of an informal "support" functionality... I am trying to figure out what is the best possible approach to employing virtualization technologies into our development process. Since the code we develop is server-centric, testing it often requires a VM with specific software requirements. I used to use VM Ware player (free version) to run my VM's until both of my laptops started exhibiting issues with corrupted windows 7 services and dying hard drives. All leads pointed to VMWare, which by the way seems to be a solid product if you pay for the Workstation edition ($300). On a side note, I have always been a fan of the Windows Server product line. I think it makes for one of the best development environments out there - it is highly scalable, highly reliable, and very efficient. So to be fair I replaced the drives of the laptops and installed Windows Server 2008R2, VS2010 Ultimate SP1, SQL Server 2008R2, TFS Server 2010 and all other tools and API's needed do do my work properly. So now I am stuck with a bunch of VMWare VMs. I don't want to repeat of what happened before, and I certainly don't want to bog down my machine with an inefficient hypervisor or services that are not needed. Futhermore the VMDK hard-disk format used by VMWare is not compatible with the VHD format of Hyper V. It is my understanding that converting from one format to the other can only happen by Microsoft System Center Virtual Machine which I have downloaded from MSDN and ready to install. I guess the question at this point is: Does SCVM run as another service in Windows? Is it a memory hog? What is a better virtualization technology - Hyper-V or Virtual Box in terms of efficiency ease of use and most importantly - memory footprint? (Keep in mind the development environment already has a ton of services running such as TFS Server, SQL Server, IIS, etc...) How would you advise to proceed at this point so that the VMs are still used in the test process? Thanks Martin

  Read the article

• Recover windows cached domain password

  - by theguy

  I have a computer from another small organization that works with our school. It was previously joined to another domain from elsewhere. The organization doesn't have an IT person so they didn't think of what they needed to do about the information on the computer before they moved it to our school. The previous user of the computer is no longer with the organization so no information about the password. The computer has information that needs to be accessed and programs so putting the hard drive on another computer and grabbing the information is a no go as I need the computer itself to be working as well. The computer is running Windows Vista Business Edition and is joined to a domain with a cached profile. The admin accounts are disabled by GPO. I've been asked to see if I could recover the password but running ophcrack gave me no hits on the cached profile. I'm not too familiar with password recovery tools that would work on a cached profile from a domain so I'm looking for answers here. Any other suggestions? Preferably something free as we're a small school and an easy to use liveCD solution like ophcrack would be appreciated.

  Read the article

• Platform to allow users to suggest and vote for ideas

  - by Simon

  I head up a support team for a software product. I am in the process of setting up a blog (Wordpress.org), a forum (PHPBB or maybe Vanilla), a means to view bugs (probably expose Jira), but would also like to allow our customers to suggest enhancement requests. Currently we have this as a 'contact form' via the blog, which feeds into a dedicated inbox, which the product manager reviews and may include some of these ideas into the product. However, I would like to give the clients more power/visibility over this. Have a look at ideas.arcgis.com. There are plenty of other similar sites as well. Users can suggest new ideas Other users can vote these ideas up or down (similar to Stack Exchange sites) Ideas that are voted highly will be given a higher priority over lower ones. We can report back on the # of ideas we implement, and potentially reject ideas with reasoning. Has anyone seen any platforms (ideally free) which would replicate something similar to this? I was half thinking of embedding Vanilla within a wordpress page, but need to look into it more.

  Read the article

• postfix test and configuration problem

  - by Woho87

  Hi Guys! I installed postfix using sudo yum install postfix postfix-mysql. I'm newbie to mail systems, but I have one AMAZON EC2 instance with a public DNS. I used the public DNS in most cases, when I configured the file main.cf. The public DNS I have is from amazon and it is a long string(ec2-123-34-234-677.....amazon.com). // I configured this on main.cf. I replaced example.com with ec2-123-.......amazon.com myhostname = mail.example.com mydomain = example.com myorigin = $mydomain mydestination = example.com, $transport_maps local_recipient_maps = $alias_maps $virtual_mailbox_maps unix:passwd.byname home_mailbox = Maildir/ How do I test postfix? I just want it to send emails for my web application. I tried to test it with >telnet localhost 25 after I typed in SSH >sudo postfix start. but I recieve the message that telnet command can not be found. I also use the Amazon linux distribution if you want to know. I use it because it is free. What have I done wrong? Are there anymore configurations required pls help!

  Read the article

< Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508  | Next Page >