Search Results

Search found 21301 results on 853 pages for 'duplicate values'.

Page 501/853 | < Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508  | Next Page >

• Does the advanced format tool bundled by manufacturers actually do anything which mkntfs doesn't?

  - by neurolysis

  I recently bought a new drive (specifically, a 2TB Samsung Spinpoint) that says on the label that it supports advanced format, and that I should download the tool from their site. Unless I'm missing something, mkntfs has always had its maximum sector size at 4096b: -s, --sector-size BYTES Specify the size of sectors in bytes. Valid sector size values are 256, 512, 1024, 2048 and 4096 bytes per sector. If omitted, mkntfs attempts to determine the sector-size automatically and if that fails a default of 512 bytes per sector is used. Will this tool on Samsung's site do anything other than format the drive in the same way doing mkntfs -s 4K /dev/sdb1 would do? To be specific, I'm intending to use this drive on a machine that will primarily run Windows XP, but I'd rather boot into Linux/BSD and format the disk manually than have bloated software. I do want to have the new AF style sectors though -- that's essential. So if I did the command above, would it have exactly the same effect as using the advanced format tool?

  Read the article

• Netcat I/O enhancements

  - by user13277689

  When Netcat integrated into OpenSolaris it was already clear that there will be couple of enhancements needed. The biggest set of the changes made after Solaris 11 Express was released brings various I/O enhancements to netcat shipped with Solaris 11. Also, since Solaris 11, the netcat package is installed by default in all distribution forms (live CD, text install, ...). Now, let's take a look at the new functionality: /usr/bin/netcat alternative program name (symlink) -b bufsize I/O buffer size -E use exclusive bind for the listening socket -e program program to execute -F no network close upon EOF on stdin -i timeout extension of timeout specification -L timeout linger on close timeout -l -p port addr previously not allowed usage -m byte_count Quit after receiving byte_count bytes -N file pattern for UDP scanning -I bufsize size of input socket buffer -O bufsize size of output socket buffer -R redir_spec port redirection addr/port[/{tcp,udp}] syntax of redir_spec -Z bypass zone boundaries -q timeout timeout after EOF on stdin Obviously, the Swiss army knife of networking tools just got a bit thicker. While by themselves the options are pretty self explanatory, their combination together with other options, context of use or boundary values of option arguments make it possible to construct small but powerful tools. For example: the port redirector allows to convert TCP stream to UDP datagrams. the buffer size specification makes it possible to send one byte TCP segments or to produce IP fragments easily. the socket linger option can be used to produce TCP RST segments by setting the timeout to 0 execute option makes it possible to simulate TCP/UDP servers or clients with shell/python/Perl/whatever script etc. If you find some other helpful ways use please share via comments. Manual page nc(1) contains more details, along with examples on how to use some of these new options.

  Read the article

• A story of Murphy&ndash;my technical issues at TechDays Switzerland #chtd

  - by Laurent Bugnion

  I had two sessions at the recent Swiss TechDays. While the first one (Advanced Development for Windows Phone 8) went extremely well (I think), I had a very annoying technical issue in the beginning of my second session. First let me add that I talked to Microsoft about that and I hope they will change a few things in the room assignment for next year. My two sessions were one right after the other, with only 15 minutes break to change room. I don’t mind having two sessions so close from each other, but I would really like them to be in the same room in order to avoid having to move my laptops (plural, that will become important later) and redoing the tech check. That being said, I am guilty of not checking where my talks would be before the day before the conference, and when I did notice, it was too late to change it. After my first session, I quickly moved to the other room and setup my main laptop, a Dell Precision. We tested the video output (VGA) and didn’t notice anything special. The projectors are using a fairly high resolution (kudos to the Basel conference center for not having old school 1024x768 projectors anymore, that makes Blend really hard to demo ;) but since everything went great during the first talk, I was not worried. In fact I even had some time to chat with some early attendees about my Microsoft Surface and the Samsung Slate 7, which I had carried with me in addition to the Precision. I just thought it would be nice to show the hardware that Windows 8 can run on, without thinking any further. When the session started, I immediately noticed that the main screen was not showing anything. I thought I had just forgotten to switch to “duplicate” for the video output, and did that with a quick Win-P. However it didn’t “hold”. After 2 seconds, it reverted back to a black display for my attendees. Then I started to really worry. We tried everything, switching from VGA to HDMI, changing the resolution, setting the projector as primary display, but nothing did the trick. The projector was just refusing to show my screen. Now, to show you how despaired I started to be, I even considered using the “extend” setting (which worked just fine), and to use one of the feedback monitors on the floor but really it was super cumbersome. Eventually, my last resort arrived: I started my Samsung Slate 7, which by chance has Visual Studio 12 and Blend 5 installed, plugged the HDMI projector in the dock (yes, I had the dock with me, which I usually don’t!), connected it to internet (had to enter a long password for that), loaded the source code from my main machine using a USB stick and…. finally started to give my presentation. All in all I think we lost about 10 minutes. Amongst the most horrible minutes of my whole life, truly (yes I am blessed, I didn’t have that many horrible minutes in my life ;) I really want to apologize to my attendees. We joked a bit during the attempts to resolve the issue, the reactions I had after the session were all very nice and sympathetic. Only a handful of people left my session while I was having the issues, and I really don’t blame them (who knew how long the problem would last!!). But still, I probably talked at more than 60 sessions over the years, and this was by far my most painful moment. What did I learn? So what did I learn from this? Well from now on I will always have my slate ready with the latest source code, internet connection and every tool I might need during the presentation. This way, if I detect even a hint that the Precision might not work, I will just switch to the Slate. The experience of presenting on the slate is actually not bad at all, it is just a bit slow for my taste, but it does work. By the way, I will be posting the code and slides for my sessions very soon, I just need to “clean it and zip it”. Stay tuned, and thanks again for your patience in that horrible circumstance. Cheers Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• EJB Persist On Master Child Relationship

  - by deepak.siddappa(at)oracle.com

  Let us take scenario where in users wants to persist master child relationship. Here will have two tables dept, emp (using Scott Schema) which are having master child relation.Model Diagram: Here in the above model diagram, Dept is the Master table and Emp is child table and Dept is related to emp by one to n relationship. Lets assume we need to make new entries in emp table using EJB persist method. Create a Emp form manually dropping the fields, where deptno will be dropped as Single Selection -> ADF Select One Choice (which is a foreign key in emp table) from deptFindAll DC. Make sure to bind all field variables in backing bean.Employee Form:Once the Emp form created, If the persistEmp() method is used to commit the record this will persist all the Emp fields into emp table except deptno, because the deptno will be passed as a Object reference in persistEmp method  (Its foreign key reference). So directly deptno can't be passed to the persistEmp method instead deptno should be explicitly set to the emp object, then the persist will save the deptno to the emp table.Below solution is one way of work around to achieve this scenario -Create a method in sessionBean for adding emp records and expose this method in DataControl.     For Ex: Here in the below code 'em" is a EntityManager.            private EntityManager em - will be member variable in sessionEJBBeanpublic void addEmpRecord(String ename, String job, BigDecimal deptno) { Emp emp = new Emp(); emp.setEname(ename); emp.setJob(job); //setting the deptno explicitly Dept dept = new Dept(); dept.setDeptno(deptno); //passing the dept object emp.setDept(dept); //persist the emp object data to Emp table em.persist(emp); }From DataControl palette Drop addEmpRecord as Method ADF button, In Edit action binding window enter the parameter values which are binded in backing bean.     For Ex:     If the name deptno textfield is binded with "deptno" variable in backing bean, then El Expression Builder pass value as "#{backingbean.deptno.value}"Binding:

  Read the article

• Groovy Debugging

  - by Vijay Allen Raj

  Groovy Debugging - An Overview:ADF BC developers may express snippets of business logic (like the following) as embedded groovy expressions: default / calculated attribute valuesvalidation rules / conditionserror message tokensLOV input values (VO) This approach has the advantages that: Groovy has a compact, EL-like syntax for expressing simple logicADF has extended this syntax to provide useful built-insembedded Groovy expressions are customizableGroovy debugging support helps improve maintainability of business logic expressed in Groovy.Following is an example how groovy debugging works.Example:This example shows how a script expression validator can be created and the groovy script debugged. It shows Step over, breakpoint functionalities as well as syntax coloring.Let us create a ADFBC application based on Emp and Dept tables, and add a script expression validator based on the script:  if (Sal >= 5000){ //If EmpSal is greater than a property value set on the custom //properties on the root AM //raise a custom exception else raise a custom warning if (Sal >= source.DBTransaction.rootApplicationModule.propertiesMap.salHigh) { adf.error.raise("ExcGreaterThanApplicationLimit"); } else { adf.error.warn("WarnGreaterThan5000"); } } else if (EmpSal <= 1000) { adf.error.raise("ExcTooLow"); }return true;In the Emp.xml Flat editor, place breakpoints at various locations as shown below:Right click the appmodule and click Debug. Enter a value greater than 5000 and click next. You can see the debugging work as shown below:  The code can be also be stepped over and debugged.

  Read the article

• Windows 7 - Virtualbox host only adapter doesn't get an IP

  - by Craig

  When I create a new host only network adapter, it will not set the IP address I assign to it. After I save the IP address & netmask it looks like it works (I see the Windows 7 User Account Control verification box), but the IP address doesn't get stored on the adapter. I have tried adding/removing the adapter from within virtualbox and settings the values manually in the Windows aapter settings dialogue. I am using a Windows 7 host. Does anyone know why the settings don't get saved, or how to get more information? C:\Program Files\Oracle\VirtualBox>VBoxManage list hostonlyifs Name: VirtualBox Host-Only Ethernet Adapter GUID: 1721835e-e2c8-4f52-90fe-df7227ebe037 DHCP: Disabled IPAddress: 0.0.0.0 NetworkMask: 0.0.0.0 IPV6Address: IPV6NetworkMaskPrefixLength: 0 HardwareAddress: 00:00:00:00:00:00 MediumType: Unknown Status: Unknown VBoxNetworkName: HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter

  Read the article

• MySQL on Windows - how do I set the wait_timeout for connections using named pipes?

  - by gustafc

  I use a MySQL database running on a Windows box, and for performance reasons I'm connecting to it using named pipes. The (Java) application using the database (through Hibernate) can let the connection lie idle for quite a long time, which causes the connection to fail with the following message: com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: The last packet successfully received from the server was 33 558 297 milliseconds ago. The last packet sent successfully to the server was 33 558 297 milliseconds ago. is longer than the server configured value of 'wait_timeout'. You should consider either expiring and/or testing connection validity before use in your application, increasing the server configured values for client timeouts, or using the Connector/J connection property 'autoReconnect=true' to avoid this problem. autoReconnect unfortunately has no effect (and neither does autoReconnectForPools), but the wait_timeout docs state that wait_timeout only applies "to TCP/IP and Unix socket file connections, not to connections made via named pipes, or shared memory". How can I change the wait_timeout for named pipes?

  Read the article

• Excel Graph: How can I turn data below in to a 'time based' graph

  - by Mike

  In my spreadsheet I am collecting time periods when certain values have been changed. The user is restricted to 4 time periods. I would like to show the data based on thos time periods. I've included a mock up' of the data and the type of graph I would like to create. I've tried to create it for the last hour but am obviously missing something so thought I'd ask around. http://i48.tinypic.com/55lezr.jpg Many thanks for any help Mike P.S How do I make this image appear in the message and not as a link?

  Read the article

• Two different domains as one user session in Google Analytics

  - by Mathew Foscarini

  I have two websites that are run as the same service. Each domain offers articles from a different market. At the top of each page the two domains are shown as menu options. If a user clicks one they can switch to the other domain. See here: http://www.cgtag.com Each domain has a different Google Analytics account, and when a user switches domains Google is counting this as a new session. It's listing the other domain as the "referral" for that new session. When the user switches back to the first domain Google is counting this as a returning visitor. This is messing up my reports. Showing returning visitors values that are higher than reality. It's also increasing hits on landing pages when the user switches, and listing the other domain as a referral site. I've found tips on how to list two domains as one website, but that results in merging the data. I want to keep the two domains separate so that I can track each ones performance, but I don't want to count domain changes as new sessions. Maybe something like treating the two domains as subdomains.

  Read the article

• Design pattern for logging changes in parent/child objects saved to database

  - by andrew

  I’ve got a 2 database tables in parent/child relationship as one-many. I’ve got three classes representing the data in these two tables: Parent Class { Public int ID {get; set;} .. other properties } Child Class { Public int ID {get;set;} Public int ParentID {get; set;} .. other properties } TogetherClass { Public Parent Parent; Public List<Child> ChildList; } Lastly I’ve got a client and server application – I’m in control of both ends so can make changes to both programs as I need to. Client makes a request for ParentID and receives a Together Class for the matching parent, and all of the child records. The client app may make changes to the children – add new children, remove or modify existing ones. Client app then sends the Together Class back to the server app. Server app needs to update the parent and child records in the database. In addition I would like to be able to log the changes – I’m doing this by having 2 separate tables one for Parent, one for child; each containing the same columns as the original plus date time modified, by whom and a list of the changes. I’m unsure as to the best approach to detect the changes in records – new records, records to be deleted, records with no fields changed, records with some fields changed. I figure I need to read the parent & children records and compare those to the ones in the Together Class. Strategy A: If Together class’s child record has an ID of say 0, that indicates a new record; insert. Any deleted child records are no longer in the Together Class; see if any of the comparison child records are not found in the Together class and delete if not found (Compare using ID). Check each child record for changes and if changed log. Strategy B: Make a new Updated TogetherClass UpdatedClass { Public Parent Parent {get; set} Public List<Child> ListNewChild {get;set;} Public List<Child> DeletedChild {get;set;} Public List<Child> ExistingChild {get;set;} // used for no changes and modified rows } And then process as per the list. The reason why I’m asking for ideas is that both of these solutions don’t seem optimal to me and I suspect this problem has been solved already – some kind of design pattern ? I am aware of one potential problem in this general approach – that where Client App A requests a record; App B requests same record; A then saves changes; B then saves changes which may overwrite changes A made. This is a separate locking issue which I’ll raise a separate question for if I’ve got trouble implementing. The actual implementation is c#, SQL Server and WCF between client and server - sharing a library containing the class implementations. Apologies if this is a duplicate post – I tried searching various terms without finding a match though.

  Read the article

• Form recognition using OCR and return image of the value

  - by Jonathan

  I'm on a project that process hundreds of forms. The forms have consistent formats but are filled out by hand by different people. I need a way to quickly processing all of these data into electronic forms. OCR recognition for typed document seems mature but for hand-writting is very lacking. For this thought, let's consider a form with several fields like this. Field_1: Value1 (example, Name: John, where Name is Field and John is value) Considering that forms are structured and typed, OCR should be able to recognize the fields. However, for the values of the fields, they are written and OCR will perform very poorly. So is there a way where the fields would be recognized on the imagem, then a image chunk of the value would be returned? Thanks.

  Read the article

• Convience of mySQL over xml

  - by Bonechilla

  Currently I use XML to store specific information to correctly load a few things such as a list of specfied characters, scenes and music, Once more I use JAXB in combination with standard compression/decompression(ZIP) functionality to store a list of extrenous data. This data is called to add functionality to the character, somewhat like Skills in an RPG. Each skill is seperated into its own XML file with a grandlist which contains the names of each file with their extensions omitted and zipped in folder that gets encrypted. At first using xml was working fine however as the skill list grow i worry about its stability. I was wondering if I should begin storing the data in mySQL. Originally I planned to simply convert everything to JSON over xml but i think possibly mySQL would be a better move. Can anyone inform me of the key difference and pros and cons of each I guess i'm looking for the best way to store the data more conviently and would be easier to operate on. The data is mostly primatives and strings and the only arraylist of values i have i can just concat into a single field and parse later

  Read the article

• How can I change the color of this part of Nautilus for my Ambiance theme modification?

  - by WarriorIng64

  I am currently messing around with Ambiance, trying to give Nautilus a dark sidebar (because I think it looks much better that way, especially with the current look having the dark-colored breadcrumbs clashing horribly with the light-colored sidebar). I have zero experience and knowledge of how to create GTK+ themes, and I couldn't find any documentation online, so I just made a copy of the folder for Ambiance under /usr/share/themes, renamed it "Ambiance Dark Sidebar" and just started messing with color values. As shown below, I found the value in nautilus.css needed to be tweaked to create the dark sidebar, but there is still one part that stubbornly stays light gray that I want to change so it matches the rest better (I'm not sure what the proper terminology is here, so I just provided a picture and marked it in red). Does anyone know what I need to do to change the color of this part so it matches the rest of the sidebar better? I already know from seeing themes like Adwaita Dark that this should be possible, but even after poking around in that I didn't find anything that seemed to help. Here are the contents of the files I modified in the theme folder Ambiance Dark Sidebar, stored alongside Ambiance in /usr/share/themes: index.theme gtk-3.0/apps/nautilus.css

  Read the article

• What is the difference between sar -B verses sar -W

  - by Mark

  I am trying to understand why my system is running slowly. I found the sar command, but wanted to know the difference between sar -B and sar -W I read the man page, and I understand that -B gives me the paging statistics and -W gives me the swapping statistics. What I would like to understand is the following: What is the correlation between the two sets of statistics. When should I be concerned about -B and when about -W? ie, what values from each command should I be concerned with? Which statistic is more closely related to system performance Thanks

  Read the article

• HD latency measurement using bonnie++ on different machines with different RAM size

  - by j0nes

  Hello, I have run bonnie++ v1.96 on two different servers without any additional load. One server is a "physical" Dell server with 32GB RAM, the other one is a virtual instance with 14GB RAM. I have read in the bonnie manuals that I should use two times the size of RAM in my bonnie runs, so I used 64GB on the physical machine and 28GB on the virtual machine. Now I want to compare the results, and I am wondering whether the results are comparable at all. The most interesting part is the latency part - on the physical machine, the values are about 10 times higher than on the virtual machine! Can I take these results seriously (e.g. the virtual machine HD is much much faster) or does the different RAM size tamper the results? Thanks! Jonas

  Read the article

• An alternative to a video codec for storing motion changes [on hold]

  - by Andrew Simpson

  I have a 3 dimensional byte array. The 3-d array represents a jpeg image. Each channel/array represents part of the RGB spectrum. I am not interested in retaining black pixels. A black pixel is represented by this atypical arrangement: myarray[0,0,0] =0; myarray[0,0,1] =0; myarray[0,0,2] =0; So, I have flattened this 3d array out to a 1d array by doing this byte[] AFlatArray = new byte[width x height x 3] and then assigning values respective to the coordinate. But like I said I do not want black pixels. So this array has to only contain color pixels with the x,y coordinate. The result I want is to re-represent the image from the i dimension byte array that only contains non-black pixels. How do I do that? It looks like I have to store black pixels as well because of the xy coordinate system. I have tried writing to a binary file but the size of that file is greater than the jpeg file as the jpeg file is compressed. I am using c#.

  Read the article

• ArchBeat Link-o-Rama Top 10 for August 19-26, 2012

  - by Bob Rhubart

  The Top 10 most popular items shared via the OTN ArchBeat Facebook page for the week of August 19-26, 2012. Now Available: Oracle SQL Developer 3.2 (3.2.09.23) The latest release of Oracle SQl Developer includes UI enhancements, 12c database support, and bug fixes. ADF Tutorial Chapter 3: Creating a Master-Detail taskflow | Yannick Ongena Oracle ACE Yannick Ongena continues his ADF tutorial with a chapter devoted to view layer and using the data control to build pages that allow user to update reference data. GlassFish Community Event at JavaOne 2012 Don't miss out on this exclusive GlassFish Community Event on Sunday, September 30th from 11:00 a.m. – 1:00 p.m. in Moscone South. Register Now! Part of JavaOne 2012. Oracle BI 11g Book Authors – Podcast #9 | Art of Business Intelligence In this home-grown podcast, authors Christian Screen, Haroun Khan, and Adrian Ward talk about their new book, "Oracle Business Intelligence Enterprise Edition 11g: A Hands-On Tutorial," about their sessions at Oracle OpenWorld, and about their ORACLENERD t-shirts. Oracle Service Bus duplicate message check using Coherence | Jan van Zoggel "Giving the fact that every message on our ESB has an unique messageID element in the SOAP header we could store this on disk, database or in memory,"says Jan van Zoggel. "With the help of Oracle Coherence this last option, in memory, is relatively simple." Even simpler with Jan's detailed instructions. Oracle Technology Network Architect Day - Boston - Sept 12 There are easier ways to increase your IT brainpower. Skip the electrodes and register for Oracle Technology Network Architect Day in Boston, September 12, 2012. This free event includes 8 technical sessions, panel Q&A, roundtable discussions—and a free lunch. 8:00 a.m. – 5:00 p.m. at the Boston Marriott Burlington, One Burlington Mall Road, Burlington, MA 01803. Oracle BPM enable BAM | Peter Paul van de Beek "BAM enables you to make decisions based on real-time information gathered from your running processes," says Peter Paul van de Beek. "With BPMN processes you can use the standard Business Indicators that the BPM Suite offers you and use them to with BAM without much extra effort." Sample Application for Switching Application Module Data Sources | Andrejus Baranovskis A sample application and how-to guide from Oracle ACE Director and ADF expert Andrejus Baranovskis. ORCLville: Some Basic BI Thoughts "If we'd stop to consider what business intelligence really is, many of us might grow a different perspective about how we implement enterprise apps," says Oracle ACE Director Floyd Teter. "What if we implemented with an eye to what kind of information we'd like to get from our enterprise apps?" Oracle VM VirtualBox 4.1.20 released |Oracle's Virtualization Blog Oracle VM VirtualBox 4.1.20 was just released at the community and Oracle download sites, reports the Fat Bloke. This is a maintenance release containing bug fixes and stability improvements. Thought for the Day "The programmer, like the poet, works only slightly removed from pure thought-stuff. He builds his castles in the air, from air, creating by exertion of the imagination. Few media of creation are so flexible, so easy to polish and rework, so readily capable of realizing grand conceptual structures." — Frederick P. Brooks Source: SoftwareQuotes

  Read the article

• Model View Control Issue: Null Pointer Initialization Question

  - by David Dimalanta

  Good morning again. This is David. Please, I need an urgent help regarding control model view where I making a code that uniquely separating into groups: An Activity Java Class to Display the Interface A View and Function Java Class for Drawing Cards and Display it on the Activity Class The problem is that the result returns a Null Pointer Exception. I have initialize for the ID for Text View and Image View. Under this class "draw_deck.java". Please help me. Here's my code for draw_deck.java: package com.bodapps.inbetween.model; import android.content.Context; import android.view.View; import android.widget.ImageView; import android.widget.TextView; import com.bodapps.inbetween.R; public class draw_deck extends View { public TextView count_label; public ImageView draw_card; private int count; public draw_deck(Context context) { super(context); // TODO Auto-generated constructor stub //I have initialized two widgets for ID. I still don't get it why I got forced closed by Null Pointer Exception thing. draw_card = (ImageView) findViewById(R.id.IV_Draw_Card); count_label = (TextView) findViewById(R.id.Text_View_Count_Card); } public void draw(int s, int c, String strSuit, String strValue, Pile pile, Context context) { //super(context); //Just printing the card drawn from pile int suit, value = 1; draw_card = (ImageView) findViewById(R.id.IV_Draw_Card); count_label = (TextView) findViewById(R.id.Text_View_Count_Card); Card card; if(!pile.isEmpty()) //Setting it to IF statement displays the card one by one. { card = pile.drawFromPile(); //Need to check first if card is null. if (card != null) { //draws an extra if (card != null) { //Get suit of card to print out. suit = card.getSuit(); switch (suit) { case CardInfo.DIAMOND: strSuit = "DIAMOND"; s=0; break; case CardInfo.HEART: strSuit = "HEART"; s=1; break; case CardInfo.SPADE: strSuit = "SPADE"; s=2; break; case CardInfo.CLUB: strSuit = "CLUB"; s=3; break; } //Get value of card to print out. value = card.getValue(); switch (value) { case CardInfo.ACE: strValue = "ACE"; c=0; break; case CardInfo.TWO: c=1; break; case CardInfo.THREE: strValue = "THREE"; c=2; break; case CardInfo.FOUR: strValue = "FOUR"; c=3; break; case CardInfo.FIVE: strValue = "FIVE"; c=4; break; case CardInfo.SIX: strValue = "SIX"; c=4; break; case CardInfo.SEVEN: strValue = "SEVEN"; c=4; break; case CardInfo.EIGHT: strValue = "EIGHT"; c=4; break; case CardInfo.NINE: strValue = "NINE"; c=4; break; case CardInfo.TEN: strValue = "TEN"; c=4; break; case CardInfo.JACK: strValue = "JACK"; c=4; break; case CardInfo.QUEEN: strValue = "QUEEN"; c=4; break; case CardInfo.KING: strValue = "KING"; c=4; break; } } } }// //Below two lines of code, this is where issued the Null Pointer Exception. draw_card.setImageResource(deck[s][c]); count_label.setText(new StringBuilder(strValue).append(" of ").append(strSuit).append(String.valueOf(" " + count++)).toString()); } //Choice of Suits in a Deck public Integer[][] deck = { //Array Group 1 is [0][0] (No. of Cards: 4 - DIAMOND) { R.drawable.card_dummy_1, R.drawable.card_dummy_2, R.drawable.card_dummy_4, R.drawable.card_dummy_5, R.drawable.card_dummy_3 }, //Array Group 2 is [1][0] (No. of Cards: 4 - HEART) { R.drawable.card_dummy_1, R.drawable.card_dummy_2, R.drawable.card_dummy_4, R.drawable.card_dummy_5, R.drawable.card_dummy_3 }, //Array Group 3 is [2][0] (No. of Cards: 4 - SPADE) { R.drawable.card_dummy_1, R.drawable.card_dummy_2, R.drawable.card_dummy_4, R.drawable.card_dummy_5, R.drawable.card_dummy_3 }, //Array Group 4 is [3][0] (No. of Cards: 4 - CLUB) { R.drawable.card_dummy_1, R.drawable.card_dummy_2, R.drawable.card_dummy_4, R.drawable.card_dummy_5, R.drawable.card_dummy_3 }, }; } And this one of the activity class, Player_Mode_2.java: package com.bodapps.inbetween; import java.util.Random; import android.app.Activity; import android.app.Dialog; import android.content.Context; import android.os.Bundle; import android.view.View; import android.view.View.OnClickListener; import android.widget.Button; import android.widget.EditText; import android.widget.ImageView; import android.widget.TextView; import android.widget.Toast; import com.bodapps.inbetween.model.Card; import com.bodapps.inbetween.model.Pile; import com.bodapps.inbetween.model.draw_deck; /* * * Public class for Two-Player mode. * */ public class Player_Mode_2 extends Activity { //Image Views private ImageView draw_card; private ImageView player_1; private ImageView player_2; private ImageView icon; //Buttons private Button set_deck; //Edit Texts private EditText enter_no_of_decks; //text Views private TextView count_label; //Integer Data Types private int no_of_cards, count; private int card_multiplier; //Contexts final Context context = this; //Pile Model public Pile pile; //Card Model public Card card; //create View @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.play_2_player_mode); //-----[ Search for Views ]----- //Initialize for Image View draw_card = (ImageView) findViewById(R.id.IV_Draw_Card); player_1 = (ImageView) findViewById(R.id.IV_Player_1_Card); player_2 = (ImageView) findViewById(R.id.IV_Player_2_Card); //Initialize for Text view or Label count_label = (TextView) findViewById(R.id.Text_View_Count_Card); //-----[ Adding Values ]----- //Integer Values count = 0; no_of_cards = 0; //-----[ Adding Dialog ]----- //Initializing Dialog final Dialog deck_dialog = new Dialog(context); deck_dialog.setContentView(R.layout.dialog); deck_dialog.setTitle("Deck Dialog"); //-----[ Initializing Views for Dialog's Contents ]----- //Initialize for Edit Text enter_no_of_decks = (EditText) deck_dialog.findViewById(R.id.Edit_Text_Set_Number_of_Decks); //Initialize for Button set_deck = (Button) deck_dialog.findViewById(R.id.Button_Deck); //-----[ Setting onClickListener() ]----- //Set Event Listener for Image view draw_card.setOnClickListener(new Draw_Card_Model()); //Set Event Listener for Setting the Deck set_deck.setOnClickListener(new OnClickListener() { public void onClick(View v) { if(card_multiplier <= 8) { //Use "Integer.parseInt()" method to instantly convert from String to int value. card_multiplier = Integer.parseInt(enter_no_of_decks.getText().toString()); //Shuffling cards... pile = new Pile(card_multiplier); //Multiply no. of decks //Dismiss or close the dialog. deck_dialog.dismiss(); } else { Toast.makeText(getApplicationContext(), "Please choose a number from 1 to 8.", Toast.LENGTH_SHORT).show(); } } }); //Show dialog. deck_dialog.show(); } //Shuffling the Array public void Shuffle_Cards(Integer[][] Shuffle_Deck) { Random random = new Random(); for(int i = Shuffle_Deck[no_of_cards].length - 1; i >=0; i--) { int Index = random.nextInt(i + 1); //Simple Swapping Integer swap = Shuffle_Deck[card_multiplier-1][Index]; Shuffle_Deck[card_multiplier-1][Index] = Shuffle_Deck[card_multiplier-1][i]; Shuffle_Deck[card_multiplier-1][i] = swap; } } //Private Class for Random Card Draw private class Draw_Card_Model implements OnClickListener { public void onClick(View v) { //Just printing the card drawn from pile int suit = 0, value = 0; String strSuit = "", strValue = ""; draw_deck draw = new draw_deck(context); //This line is where issued the Null Pointer Exception. if (count == card_multiplier*52) { // A message shows up when all cards are draw out. Toast.makeText(getApplicationContext(), "All cards have been used up.", Toast.LENGTH_SHORT).show(); draw_card.setEnabled(false); } else { draw.draw(suit, value, strSuit, strValue, pile, context); count_label.setText(count); //This is where I got force closed error, although "int count" have initialized the number. This was supposed to accept in the setText() method. count++; } } } } Take note that the issues on Null Pointer Exception is the Image View and the Edit Text. I got to test it. Thanks. If you have any info about my question, let me know it frankly.

  Read the article

• How to plot survey results on Excel?

  - by Mulone

  Hi all, I would like to plot the average of these data sample: 1. Contribution to the project 2. Affiliation with project owners 3. Level of expertise 4. Learning Curve Yes No 3 2 No No 3 2 No No 4 3 No No 5 3 No No 3 3 Yes Yes 5 4 No No 4 3 No No 3 2 No Yes 2 4 No No 5 2 No Yes 5 No answer No No 2 2 No No 3 3 ... Basically I know how to do the average of each numeric column, but I have a few questions for you: If the column contains non numeric values (e.g. "no answer") the average doesn't work. Is there a workaround for this? How can I count the yes/no results and plot only a percentage? Thanks for any hints! Mulone

  Read the article

• Huge procedurally generated 'wilderness' worlds

  - by The Communist Duck

  I'm sure you all know of games like Dwarf Fortress - massive, procedural generated wilderness and land. Something like this, taken from this very useful article. However, I was wondering how I could apply this to a much larger scale; the scale of Minecraft comes to mind (isn't that something like 8x the size of the Earth's surface?). Pseudo-infinite, I think the best term would be. The article talks about fractal perlin noise. I am no way an expert on it, but I get the general idea (it's some kind of randomly generated noise which is semi-coherent, so not just random pixel values). I could just define regions X by X in size, add some region loading type stuff, and have one bit of noise generating a region. But this would result in just huge amounts of islands. On the other extreme, I don't think I can really generate a supermassive sheet of perlin noise. And it would just be one big island, I think. I am pretty sure Perlin noise, or some noise, would be the answer in some way. I mean, the map is really nice looking. And you could replace the ascii with tiles, and get something very nice looking. Anyone have any ideas? Thanks. :D

  Read the article

• Most efficient way to handle coordinate maps in Java

  - by glowcoder

  I have a rectangular tile-based layout. It's your typical Cartesian system. I would like to have a single class that handles two lookup styles Get me the set of players at position X,Y Get me the position of player with key K My current implementation is this: class CoordinateMap<V> { Map<Long,Set<V>> coords2value; Map<V,Long> value2coords; // convert (int x, int y) to long key - this is tested, works for all values -1bil to +1bil // My map will NOT require more than 1 bil tiles from the origin :) private Long keyFor(int x, int y) { int kx = x + 1000000000; int ky = y + 1000000000; return (long)kx | (long)ky << 32; } // extract the x and y from the keys private int[] coordsFor(long k) { int x = (int)(k & 0xFFFFFFFF) - 1000000000; int y = (int)((k >>> 32) & 0xFFFFFFFF) - 1000000000; return new int[] { x,y }; } } From there, I proceed to have other methods that manipulate or access the two maps accordingly. My question is... is there a better way to do this? Sure, I've tested my class and it works fine. And sure, something inside tells me if I want to reference the data by two different keys, I need two different maps. But I can also bet I'm not the first to run into this scenario. Thanks!

  Read the article

• Reflection and the params Keyword

  - by Robert May

  I’ve had to look this up a couple of times, and there’s not much out there, so I end up guessing the same answer over and over. When using MethodBase.GetParameters() to get an array of ParameterInfo object, I often want to get a count of the number of parameters that are out, optional, params, etc.  For out and optional, you can simply check ParameterInfo.IsOut or ParameterInfo.IsOptional or any number of other “Attributes”. However, for params, there isn’t a property on ParameterInfo.  Instead, you have to do this: info.GetCustomAttributes(typeof(ParamArrayAttribute), true) This will get you a set of all of the attributes that are the ParamArrayAttribute, which you can then turn into a linq statement that looks like this: methodParameters.Count(info => info.GetCustomAttributes(typeof(ParamArrayAttribute), true).Count() > 0); Which, assuming that methodParameters is the result of MethodBase.GetParameters, will give you a count of the number of parameters that have the params keyword.  Of course, there can be only one, but who’s counting! Now, hopefully, the next time I try to look this up, my own blog will get the values. Technorati Tags: Reflection

  Read the article

• Duplication of code (backend and javascript - knockout)

  - by Michal B.

  We have a new developer in our team. He seems a smart guy (he just came in so I cannot really judge). He started with implementing some small enhancements in the project (MVC3 web application using javascript - jquery and knockout). Let's say we have two values: A - quite complex calculation C - constant B = A + C On the screen there is value B and user can change it (normal texbox). When B changes, A changes as well because C is constant. So there is linear dependency between A and B. Now, all the calculations are done in the backend, but we need to recalculate A as user changes B (in js, I would use knockout). I thought about storing old A and B and when B changes by 10 then we know that new A will be old A + 10. He says this is dirty, because it's duplication of code (we make use of the fact that they are dependent and according to him that should be only in one place in our app). I understand it's not ideal, but making AJAX request after every key press seems a bit too much. It's a really small thing and I would not post if we haven't had long discussion about it. How do you deal with such problems? Also I can imagine that using knockout implies lots of calculations on the client side, which very often leads to duplication of the same calculations from the backend. Does anyone have links to some articles/thoughts on this topic?

  Read the article

• .htaccess do not work without index.php on CodeIgniter

  - by Mattia

  I have read a lot of topic with the same problem but I do not find the solution. I have a LAMP into Ubuntu server. My document root is /home/utente/ into this dir I have another dir (turni) with a CodeIgniter web app. The web app works fine with the index.php into the URL, but I want to eliminate it. I have this configuration: config.php into CodeIgniter: $config['index_page'] = ''; .htaccess: RewriteEngine On RewriteBase / RewriteCond %{REQUEST_URI} ^system.* RewriteRule ^(.*)$ /index.php?/$1 [L] RewriteCond %{REQUEST_URI} ^application.* RewriteRule ^(.*)$ /index.php?/$1 [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php?/$1 [L] /etc/apache2/sites-available/default: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /home/utente <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/utente/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> When I open a link of the web app without index.php into the URL, the server show me this error: The requested URL /turni/auth/login was not found on this server. Why? If I put the index.php like /turni/index.php/auth/login all works fine.

  Read the article

• Deleting a row from self-referencing table

  - by Jake Rutherford

  Came across this the other day and thought “this would be a great interview question!” I’d created a table with a self-referencing foreign key. The application was calling a stored procedure I’d created to delete a row which caused but of course…a foreign key exception. You may say “why not just use a the cascade delete option?” Good question, easy answer. With a typical foreign key relationship between different tables which would work. However, even SQL Server cannot do a cascade delete of a row on a table with self-referencing foreign key. So, what do you do?…… In my case I re-wrote the stored procedure to take advantage of recursion:   -- recursively deletes a Foo ALTER PROCEDURE [dbo].[usp_DeleteFoo]      @ID int     ,@Debug bit = 0    AS     SET NOCOUNT ON;     BEGIN TRANSACTION     BEGIN TRY         DECLARE @ChildFoos TABLE         (             ID int         )                 DECLARE @ChildFooID int                        INSERT INTO @ChildFoos         SELECT ID FROM Foo WHERE ParentFooID = @ID                 WHILE EXISTS (SELECT ID FROM @ChildFoos)         BEGIN             SELECT TOP 1                 @ChildFooID = ID             FROM                 @ChildFoos                             DELETE FROM @ChildFoos WHERE ID = @ChildFooID                         EXEC usp_DeleteFoo @ChildFooID         END                                    DELETE FROM dbo.[Foo]         WHERE [ID] = @ID                 IF @Debug = 1 PRINT 'DEBUG:usp_DeleteFoo, deleted - ID: ' + CONVERT(VARCHAR, @ID)         COMMIT TRANSACTION     END TRY     BEGIN CATCH         ROLLBACK TRANSACTION         DECLARE @ErrorMessage VARCHAR(4000), @ErrorSeverity INT, @ErrorState INT         SELECT @ErrorMessage = ERROR_MESSAGE(), @ErrorSeverity = ERROR_SEVERITY(), @ErrorState = ERROR_STATE()         IF @ErrorState <= 0 SET @ErrorState = 1         INSERT INTO ErrorLog(ErrorNumber,ErrorSeverity,ErrorState,ErrorProcedure,ErrorLine,ErrorMessage)         VALUES(ERROR_NUMBER(), @ErrorSeverity, @ErrorState, ERROR_PROCEDURE(), ERROR_LINE(), @ErrorMessage)         RAISERROR (@ErrorMessage, @ErrorSeverity, @ErrorState)     END CATCH   This procedure will first determine any rows which have the row we wish to delete as it’s parent. It then simply iterates each child row calling the procedure recursively in order to delete all ancestors before eventually deleting the row we wish to delete.

  Read the article

< Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508  | Next Page >