Search Results

Search found 13151 results on 527 pages for 'performance counters'.

Page 501/527 | < Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508  | Next Page >

• Remote Postgresql - extremely slow

  - by Muffinbubble

  Hi, I have setup PostgreSQL on a VPS I own - the software that accesses the database is a program called PokerTracker. PokerTracker logs all your hands and statistics whilst playing online poker. I wanted this accessible from several different computers so decided to installed it on my VPS and after a few hiccups I managed to get it connecting without errors. However, the performance is dreadful. I have done tons of research on 'remote postgresql slow' etc and am yet to find an answer so am hoping someone is able to help. Things to note: The query I am trying to execute is very small. Whilst connecting locally on the VPS, the query runs instantly. While running it remotely, it takes about 1 minute and 30 seconds to run the query. The VPS is running 100MBPS and then computer I'm connecting to it from is on an 8MB line. The network communication between the two is almost instant, I am able to remotely connect fine with no lag whatsoever and am hosting several websites running MSSQL and all the queries run instantly, whether connected remotely or locally so it seems specific to PostgreSQL. I'm running their newest version of the software and the newest compatible version of PostgreSQL with their software. The database is a new database, containing hardly any data and I've ran vacuum/analyze etc all to no avail, I see no improvements. I don't understand how MSSQL can query almost instantly yet PostgreSQL struggles so much. I am able to telnet to the post 5432 on the VPS IP with no problems, and as I say the query does execute it just takes an extremely long time. What I do notice is on the router when the query is running that hardly any bandwidth is being used - but then again I wouldn't expect it to for a simple query but am not sure if this is the issue. I've tried connecting remotely on 3 different networks now (including different routers) but the problem remains. Connecting remotely via another machine via the LAN is instant. I have also edited the postgre conf file to allow for more memory/buffers etc but I don't think this is the problem - what I am asking it to do is very simple - it shouldn't be intensive at all. Thanks, Ricky

  Read the article

• Thread sleep and thread join.

  - by Dhruv Gairola

  hi guys, if i put a thread to sleep in a loop, netbeans gives me a caution saying Invoking Thread.sleep in loop can cause performance problems. However, if i were to replace the sleep with join, no such caution is given. Both versions compile and work fine tho. My code is below (check the last few lines for "Thread.sleep() vs t.join()"). public class Test{ //Display a message, preceded by the name of the current thread static void threadMessage(String message) { String threadName = Thread.currentThread().getName(); System.out.format("%s: %s%n", threadName, message); } private static class MessageLoop implements Runnable { public void run() { String importantInfo[] = { "Mares eat oats", "Does eat oats", "Little lambs eat ivy", "A kid will eat ivy too" }; try { for (int i = 0; i < importantInfo.length; i++) { //Pause for 4 seconds Thread.sleep(4000); //Print a message threadMessage(importantInfo[i]); } } catch (InterruptedException e) { threadMessage("I wasn't done!"); } } } public static void main(String args[]) throws InterruptedException { //Delay, in milliseconds before we interrupt MessageLoop //thread (default one hour). long patience = 1000 * 60 * 60; //If command line argument present, gives patience in seconds. if (args.length > 0) { try { patience = Long.parseLong(args[0]) * 1000; } catch (NumberFormatException e) { System.err.println("Argument must be an integer."); System.exit(1); } } threadMessage("Starting MessageLoop thread"); long startTime = System.currentTimeMillis(); Thread t = new Thread(new MessageLoop()); t.start(); threadMessage("Waiting for MessageLoop thread to finish"); //loop until MessageLoop thread exits while (t.isAlive()) { threadMessage("Still waiting..."); //Wait maximum of 1 second for MessageLoop thread to //finish. /*******LOOK HERE**********************/ Thread.sleep(1000);//issues caution unlike t.join(1000) /**************************************/ if (((System.currentTimeMillis() - startTime) > patience) && t.isAlive()) { threadMessage("Tired of waiting!"); t.interrupt(); //Shouldn't be long now -- wait indefinitely t.join(); } } threadMessage("Finally!"); } } As i understand it, join waits for the other thread to complete, but in this case, arent both sleep and join doing the same thing? Then why does netbeans throw the caution?

  Read the article

• Hidden divs for "lazy javascript" loading? Possible security/other issues?

  - by xyld

  I'm curious about people's opinion's and thoughts about this situation. The reason I'd like to lazy load javascript is because of performance. Loading javascript at the end of the body reduces the browser blocking and ends up with much faster page loads. But there is some automation I'm using to generate the html (django specifically). This automation has the convenience of allowing forms to be built with "Widgets" that output content it needs to render the entire widget (extra javascript, css, ...). The problem is that the widget wants to output javascript immediately into the middle of the document, but I want to ensure all javascript loads at the end of the body. When the following widget is added to a form, you can see it renders some <script>...</script> tags: class AutoCompleteTagInput(forms.TextInput): class Media: css = { 'all': ('css/jquery.autocomplete.css', ) } js = ( 'js/jquery.bgiframe.js', 'js/jquery.ajaxQueue.js', 'js/jquery.autocomplete.js', ) def render(self, name, value, attrs=None): output = super(AutoCompleteTagInput, self).render(name, value, attrs) page_tags = Tag.objects.usage_for_model(DataSet) tag_list = simplejson.dumps([tag.name for tag in page_tags], ensure_ascii=False) return mark_safe(u'''<script type="text/javascript"> jQuery("#id_%s").autocomplete(%s, { width: 150, max: 10, highlight: false, scroll: true, scrollHeight: 100, matchContains: true, autoFill: true }); </script>''' % (name, tag_list,)) + output What I'm proposing is that if someone uses a <div class=".lazy-js">...</div> with some css (.lazy-js { display: none; }) and some javascript (jQuery('.lazy-js').each(function(index) { eval(jQuery(this).text()); }), you can effectively force all javascript to load at the end of page load: class AutoCompleteTagInput(forms.TextInput): class Media: css = { 'all': ('css/jquery.autocomplete.css', ) } js = ( 'js/jquery.bgiframe.js', 'js/jquery.ajaxQueue.js', 'js/jquery.autocomplete.js', ) def render(self, name, value, attrs=None): output = super(AutoCompleteTagInput, self).render(name, value, attrs) page_tags = Tag.objects.usage_for_model(DataSet) tag_list = simplejson.dumps([tag.name for tag in page_tags], ensure_ascii=False) return mark_safe(u'''<div class="lazy-js"> jQuery("#id_%s").autocomplete(%s, { width: 150, max: 10, highlight: false, scroll: true, scrollHeight: 100, matchContains: true, autoFill: true }); </div>''' % (name, tag_list,)) + output Nevermind all the details of my specific implementation (the specific media involved), I'm looking for a consensus on whether the method of using lazy-loaded javascript through hidden a hidden tags can pose issues whether security or other related? One of the most convenient parts about this is that it follows the DRY principle rather well IMO because you don't need to hack up a specific lazy-load for each instance in the page. It just "works". UPDATE: I'm not sure if django has the ability to queue things (via fancy template inheritance or something?) to be output just before the end of the </body>?

  Read the article

• Akka framework support for finding duplicate messages

  - by scala_is_awesome

  I'm trying to build a high-performance distributed system with Akka and Scala. If a message requesting an expensive (and side-effect-free) computation arrives, and the exact same computation has already been requested before, I want to avoid computing the result again. If the computation requested previously has already completed and the result is available, I can cache it and re-use it. However, the time window in which duplicate computation can be requested may be arbitrarily small. e.g. I could get a thousand or a million messages requesting the same expensive computation at the same instant for all practical purposes. There is a commercial product called Gigaspaces that supposedly handles this situation. However there seems to be no framework support for dealing with duplicate work requests in Akka at the moment. Given that the Akka framework already has access to all the messages being routed through the framework, it seems that a framework solution could make a lot of sense here. Here is what I am proposing for the Akka framework to do: 1. Create a trait to indicate a type of messages (say, "ExpensiveComputation" or something similar) that are to be subject to the following caching approach. 2. Smartly (hashing etc.) identify identical messages received by (the same or different) actors within a user-configurable time window. Other options: select a maximum buffer size of memory to be used for this purpose, subject to (say LRU) replacement etc. Akka can also choose to cache only the results of messages that were expensive to process; the messages that took very little time to process can be re-processed again if needed; no need to waste precious buffer space caching them and their results. 3. When identical messages (received within that time window, possibly "at the same time instant") are identified, avoid unnecessary duplicate computations. The framework would do this automatically, and essentially, the duplicate messages would never get received by a new actor for processing; they would silently vanish and the result from processing it once (whether that computation was already done in the past, or ongoing right then) would get sent to all appropriate recipients (immediately if already available, and upon completion of the computation if not). Note that messages should be considered identical even if the "reply" fields are different, as long as the semantics/computations they represent are identical in every other respect. Also note that the computation should be purely functional, i.e. free from side-effects, for the caching optimization suggested to work and not change the program semantics at all. If what I am suggesting is not compatible with the Akka way of doing things, and/or if you see some strong reasons why this is a very bad idea, please let me know. Thanks, Is Awesome, Scala

  Read the article

• ANSI C as core of a C# project? Is this possible?

  - by Nektarios

  I'm writing a NON-GUI app which I want to be cross platform between OS X and Windows. I'm looking at the following architecture, but I don't know if it will work on the windows side: (Platform specific entry point) - ANSI C main loop = ANSI C model code doing data processing / logic = (Platform specific helpers) So the core stuff I'm planning to write in regular ANSI C, because A) it should be platform independent, B) I'm extremely comfortable with C, C) It can do the job and do it well (Platform specific entry point) can be written in whatever necessary to get the job done, this is a small amount of code, doesn't matter to me. (Platform specific helpers) is the sticky thing. This is stuff like parsing XML, accessing databases, graphics toolkit stuff, whatever. Things that aren't easy in C. Things that modern languages/frameworks will give for free. On OS X this code will be written in Objective-C interfacing with Cocoa. On Windows I'm thinking my best bet is to use C# So on Windows my architecture (simplified) looks like (C# or C?) - ANSI C - C# Is this possible? Some thoughts/suggestions so far.. 1) Compile my C core as a .dll -- this is fine, but seems there's no way to call my C# helpers unless I can somehow get function pointers and pass them to my core, but that seems unlikely 2) Compile a C .exe and a C# .exe and have them talk via shared memory or some kind of IPC. I'm not entirely opposed to this but it obviously introduces a lot of complexity so it doesn't seem ideal 3) Instead of C# use C++, it gets me some nice data management stuff and nice helper code. And I can mix it pretty easily. And the work I do could probably easily port to Linux. But I really don't like C++, and I don't want this to turn in to a 3rd-party-library-fest. Not that it's a huge deal, but it's 2010.. anything for basic data management should be built in. And targetting Linux is really not a priority. Note that no "total" alternatives are OK as suggested in other similar questions on SO I've seen; java, RealBasic, mono.. this is an extremely performance intensive application doing soft realtime for game/simulation purposes, I need C & friends here to do it right (maybe you don't, but I do)

  Read the article

• CultureManager issue

  - by Serge

  I have a bug I don't understand. While the following works fine: Resources.Classes.AFieldFormula.DirectFieldFormula this one throws an exception: new ResourceManager(typeof(Resources.Classes.AFieldFormula)).GetString("DirectFieldFormula"); Could not find any resources appropriate for the specified culture or the neutral culture. Make sure \"Resources.Classes.AFieldFormula.resources\" was correctly embedded or linked into assembly \"MygLogWeb\" at compile time, or that all the satellite assemblies required are loadable and fully signed. How comes? Resource designer.cs file: //------------------------------------------------------------------------------ // <auto-generated> // This code was generated by a tool. // Runtime Version:4.0.30319.18408 // // Changes to this file may cause incorrect behavior and will be lost if // the code is regenerated. // </auto-generated> //------------------------------------------------------------------------------ namespace Resources.Classes { using System; /// <summary> /// A strongly-typed resource class, for looking up localized strings, etc. /// </summary> // This class was auto-generated by the StronglyTypedResourceBuilder // class via a tool like ResGen or Visual Studio. // To add or remove a member, edit your .ResX file then rerun ResGen // with the /str option, or rebuild your VS project. [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "4.0.0.0")] [global::System.Diagnostics.DebuggerNonUserCodeAttribute()] [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()] public class AFieldFormula { private static global::System.Resources.ResourceManager resourceMan; private static global::System.Globalization.CultureInfo resourceCulture; [global::System.Diagnostics.CodeAnalysis.SuppressMessageAttribute("Microsoft.Performance", "CA1811:AvoidUncalledPrivateCode")] internal AFieldFormula() { } /// <summary> /// Returns the cached ResourceManager instance used by this class. /// </summary> [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)] public static global::System.Resources.ResourceManager ResourceManager { get { if (object.ReferenceEquals(resourceMan, null)) { global::System.Resources.ResourceManager temp = new global::System.Resources.ResourceManager("MygLogWeb.Classes.AFieldFormula", typeof(AFieldFormula).Assembly); resourceMan = temp; } return resourceMan; } } /// <summary> /// Overrides the current thread's CurrentUICulture property for all /// resource lookups using this strongly typed resource class. /// </summary> [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)] public static global::System.Globalization.CultureInfo Culture { get { return resourceCulture; } set { resourceCulture = value; } } /// <summary> /// Looks up a localized string similar to Direct field. /// </summary> public static string DirectFieldFormula { get { return ResourceManager.GetString("DirectFieldFormula", resourceCulture); } } } }

  Read the article

• [NHibernate and ASP.NET MVC] How can I implement a robust session-per-request pattern in my project,

  - by Guillaume Gervais

  I'm currently building an ASP.NET MVC project, with NHibernate as its persistance layer. For now, some functionnalities have been implemented, but only use local NHibernate sessions: each method that accessed the database (read or write) needs to instanciate its own NHibernate session, with the "using()" directive. The problem is that I want to leverage NHibernate's Lazy-Loading capabilities to improve the performance of my project. This implies an open NHibernate session per request until the view is rendered. Furthermore, simultaneous request must be supported (multiple Sessions at the same time). How can I achieve that as cleanly as possible? I searched the Web a little bit and learned about the session-per-request pattern. Most of the implementations I saw used some sort of Http* (HttpContext, etc.) object to store the session. Also, using the Application_BeginRequest/Application_EndRequest functions is complicated, since they get fired for each HTTP request (aspx files, css files, js files, etc.), when I only want to instanciate a session once per request. The concern that I have is that I don't want my views or controllers to have access to NHibernate sessions (or, more generally, NHibernate namespaces and code). That means that I do not want to handle sessions at the controller level nor the view one. I have a few options in mind. Which one seems the best ? Use interceptors (like in GRAILS) that get triggered before and after the controller action. These would open and close sessions/transactions. Is it possible in the ASP.NET MVC world? Use the CurrentSessionContext Singleton provided by NHibernate in a Web context. Using this page as an example, I think this is quite promising, but that still requires filters at the controller level. Use the HttpContext.Current.Items to store the request session. This, coupled with a few lines of code in Global.asax.cs, can easily provide me with a session on the request level. However, it means that dependencies will be injected between NHibernate and my views (HttpContext). Thank you very much!

  Read the article

• Can I use the [] operator in C++ to create virtual arrays

  - by Shane MacLaughlin

  I have a large code base, originally C ported to C++ many years ago, that is operating on a number of large arrays of spatial data. These arrays contain structs representing point and triangle entities that represent surface models. I need to refactor the code such that the specific way these entities are stored internally varies for specific scenarios. For example if the points lie on a regular flat grid, I don't need to store the X and Y coordinates, as they can be calculated on the fly, as can the triangles. Similarly, I want to take advantage of out of core tools such as STXXL for storage. The simplest way of doing this is replacing array access with put and get type functions, e.g. point[i].x = XV; becomes Point p = GetPoint(i); p.x = XV; PutPoint(i,p); As you can imagine, this is a very tedious refactor on a large code base, prone to all sorts of errors en route. What I'd like to do is write a class that mimics the array by overloading the [] operator. As the arrays already live on the heap, and move around with reallocs, the code already assumes that references into the array such as point *p = point + i; may not be used. Is this class feasible to write? For example writing the methods below in terms of the [] operator; void MyClass::PutPoint(int Index, Point p) { if (m_StorageStrategy == RegularGrid) { int xoffs,yoffs; ComputeGridFromIndex(Index,xoffs,yoffs); StoreGridPoint(xoffs,yoffs,p.z); } else m_PointArray[Index] = p; } } Point MyClass::GetPoint(int Index) { if (m_StorageStrategy == RegularGrid) { int xoffs,yoffs; ComputeGridFromIndex(Index,xoffs,yoffs); return GetGridPoint(xoffs,yoffs); // GetGridPoint returns Point } else return m_PointArray[Index]; } } My concern is that all the array classes I've seen tend to pass by reference, whereas I think I'll have to pass structs by value. I think it should work put other than performance, can anyone see any major pitfalls with this approach. n.b. the reason I have to pass by value is to get point[a].z = point[b].z + point[c].z to work correctly where the underlying storage type varies.

  Read the article

• WPF PathGeometry/RotateTransform optimization

  - by devinb

  I am having performance issues when rendering/rotating WPF triangles If I had a WPF triangle being displayed and it will be rotated to some degree around a centrepoint, I can do it one of two ways: Programatically determine the points and their offset in the backend, use XAML to simply place them on the canvas where they belong, it would look like this: <Path Stroke="Black"> <Path.Data> <PathGeometry> <PathFigure StartPoint ="{Binding CalculatedPointA, Mode=OneWay}"> <LineSegment Point="{Binding CalculatedPointB, Mode=OneWay}" /> <LineSegment Point="{Binding CalculatedPointC, Mode=OneWay}" /> <LineSegment Point="{Binding CalculatedPointA, Mode=OneWay}" /> </PathFigure> </PathGeometry> </Path.Data> </Path> Generate the 'same' triangle every time, and then use a RenderTransform (Rotate) to put it where it belongs. In this case, the rotation calculations are being obfuscated, because I don't have any access to how they are being done. <Path Stroke="Black"> <Path.Data> <PathGeometry> <PathFigure StartPoint ="{Binding TriPointA, Mode=OneWay}"> <LineSegment Point="{Binding TriPointB, Mode=OneWay}" /> <LineSegment Point="{Binding TriPointC, Mode=OneWay}" /> <LineSegment Point="{Binding TriPointA, Mode=OneWay}" /> </PathFigure> </PathGeometry> </Path.Data> <Path.RenderTransform> <RotateTransform CenterX="{Binding Centre.X, Mode=OneWay}" CenterY="{Binding Centre.Y, Mode=OneWay}" Angle="{Binding Orientation, Mode=OneWay}" /> </Path.RenderTransform> </Path> My question is which one is faster? I know I should test it myself but how do I measure the render time of objects with such granularity. I would need to be able to time how long the actual rendering time is for the form, but since I'm not the one that's kicking off the redraw, I don't know how to capture the start time.

  Read the article

• c++ std::ostringstream vs std::string::append

  - by NickSoft

  In all examples that use some kind of buffering I see they use stream instead of string. How is std::ostringstream and << operator different than using string.append. Which one is faster and which one uses less resourses (memory). One difference I know is that you can output different types into output stream (like integer) rather than the limited types that string::append accepts. Here is an example: std::ostringstream os; os << "Content-Type: " << contentType << ";charset=" << charset << "\r\n"; std::string header = os.str(); vs std::string header("Content-Type: "); header.append(contentType); header.append(";charset="); header.append(charset); header.append("\r\n"); Obviously using stream is shorter, but I think append returns reference to the string so it can be written like this: std::string header("Content-Type: "); header.append(contentType) .append(";charset=") .append(charset) .append("\r\n"); And with output stream you can do: std::string content; ... os << "Content-Length: " << content.length() << "\r\n"; But what about memory usage and speed? Especially when used in a big loop. Update: To be more clear the question is: Which one should I use and why? Is there situations when one is preferred or the other? For performance and memory ... well I think benchmark is the only way since every implementation could be different. Update 2: Well I don't get clear idea what should I use from the answers which means that any of them will do the job, plus vector. Cubbi did nice benchmark with the addition of Dietmar Kühl that the biggest difference is construction of those objects. If you are looking for an answer you should check that too. I'll wait a bit more for other answers (look previous update) and if I don't get one I think I'll accept Tolga's answer because his suggestion to use vector is already done before which means vector should be less resource hungry.

  Read the article

• Is order of parameters for database Command object really important?

  - by nawfal

  I was debugging a database operation code and I found that proper UPDATE was never happening though the code never failed as such. This is the code: condb.Open(); OleDbCommand dbcom = new OleDbCommand("UPDATE Word SET word=?,sentence=?,mp3=? WHERE id=? AND exercise_id=?", condb); dbcom.Parameters.AddWithValue("id", wd.ID); dbcom.Parameters.AddWithValue("exercise_id", wd.ExID); dbcom.Parameters.AddWithValue("word", wd.Name); dbcom.Parameters.AddWithValue("sentence", wd.Sentence); dbcom.Parameters.AddWithValue("mp3", wd.Mp3); But after some tweaking this worked: condb.Open(); OleDbCommand dbcom = new OleDbCommand("UPDATE Word SET word=?,sentence=?,mp3=? WHERE id=? AND exercise_id=?", condb); dbcom.Parameters.AddWithValue("word", wd.Name); dbcom.Parameters.AddWithValue("sentence", wd.Sentence); dbcom.Parameters.AddWithValue("mp3", wd.Mp3); dbcom.Parameters.AddWithValue("id", wd.ID); dbcom.Parameters.AddWithValue("exercise_id", wd.ExID); Why is it so important that the parameters in WHERE clause has to be given the last in case of OleDb connection? Having worked with MySQL previously, I could (and usually do) write parameters of WHERE clause first because that's more logical to me. Is parameter order important when querying database in general? Some performance concern or something? Is there a specific order to be maintained in case of other databases like DB2, Sqlite etc? Update: I got rid of ? and included proper names with and without @. The order is really important. In both cases only when WHERE clause parameters was mentioned last, actual update happened. To make matter worse, in complex queries, its hard to know ourselves which order is Access expecting, and in all situations where order is changed, the query doesnt do its intended duty with no warning/error!!

  Read the article

• Add console.profile statements to JavaScript/jQuery code on the fly.

  - by novogeek

  Hi folks, We have a thick client app using jQuery heavily and want to profile the performance of the code using firebug's console.profile API. The problem is, I don't want to change the code to write the profile statements. Take this example: var search=function(){ this.init=function(){ console.log('init'); } this.ajax=function(){ console.log('ajax'); //make ajax call using $.ajax and do some DOM manipulations here.. } this.cache=function(){ console.log('cache'); } } var instance=new search(); instance.ajax(); I want to profile my instance.ajax method, but I dont want to add profile statements in the code, as that makes it difficult to maintain the code. I'm trying to override the methods using closures, like this: http://www.novogeek.com/post/2010/02/27/Overriding-jQueryJavaScript-functions-using-closures.aspx but am not very sure how I can achieve. Any pointers on this? I think this would help many big projects to profile the code easily without a big change in code. Here is the idea. Just run the below code in firebug console, to know what I'm trying to achieve. var search=function(){ this.init=function(){ console.log('init'); } this.ajax=function(){ console.log('ajax'); //make ajax call using $.ajax and do some DOM manipulations here.. } this.cache=function(){ console.log('cache'); } } var instance=new search(); $.each(instance, function(functionName, functionBody){ (function(){ var dup=functionBody functionBody=function(){ console.log('modifying the old function: ',functionName); console.profile(functionName); dup.apply(this,arguments); console.profileEnd(functionName); } })(); console.log(functionName, '::', functionBody()); }); Now what I need is, if i say instance.ajax(), I want the new ajax() method to be called, along with the console.profile statements. Hope I'm clear with the requirement. Please improvise the above code. Regards, Krishna, http://www.novogeek.com

  Read the article

• JPanel's child components paint/layout problem

  - by Tom Brito

  I'm having a problem that when my frame is shown (after a login dialog) the buttons are not on correct position, then in some miliseconds they go to the right position (the center of the panel with border layout). When I make a SSCCE, it works correct, but when I run my whole code I have this fast-miliseconds delay to the buttons to go to the correct place. Unfortunately, I can't post the whole code, but the method that shows the frame is: public void login(JComponent userView) { centerPanel.removeAll(); centerPanel.add(userView); centerPanel.revalidate(); centerPanel.repaint(); frame.setVisible(true); } What would cause this delay to the panel layout? (I'm running everything in the EDT) -- update In my machine, this SSCCE shows the layout problem in 2 of 10 times I run it: import java.awt.BorderLayout; import javax.swing.JButton; import javax.swing.JFrame; import javax.swing.JPanel; import javax.swing.SwingUtilities; public class TEST { public static void main(String[] args) throws Exception { SwingUtilities.invokeAndWait(new Runnable() { @Override public void run() { System.out.println("Debug test..."); JPanel btnPnl = new JPanel(); btnPnl.add(new JButton("TEST")); JFrame f = new JFrame("TEST"); f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); f.getContentPane().setLayout(new BorderLayout()); f.getContentPane().add(btnPnl); f.pack(); f.setSize(800, 600); f.setVisible(true); System.out.println("End debug test!"); } }); } } The button first appers in the up-left, and then it goes to the center. Please, note that I'm understand, not just correct. Is it a java bug? --update OK, so the SSCCE don't show the problem with you that tried till now. Maybe it's my computer performance problem. But this don't answer the question, I still think Java Swing is creating new threads for make the layout behind the scenes.

  Read the article

• Query performs poorly unless a temp table is used

  - by Paul McLoughlin

  The following query takes about 1 minute to run, and has the following IO statistics: SELECT T.RGN, T.CD, T.FUND_CD, T.TRDT, SUM(T2.UNITS) AS TotalUnits FROM dbo.TRANS AS T JOIN dbo.TRANS AS T2 ON T2.RGN=T.RGN AND T2.CD=T.CD AND T2.FUND_CD=T.FUND_CD AND T2.TRDT<=T.TRDT JOIN TASK_REQUESTS AS T3 ON T3.CD=T.CD AND T3.RGN=T.RGN AND T3.TASK = 'UPDATE_MEM_BAL' GROUP BY T.RGN, T.CD, T.FUND_CD, T.TRDT (4447 row(s) affected) Table 'TRANSACTIONS'. Scan count 5977, logical reads 7527408, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. Table 'TASK_REQUESTS'. Scan count 1, logical reads 11, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. SQL Server Execution Times: CPU time = 58157 ms, elapsed time = 61437 ms. If I instead introduce a temporary table then the query returns quickly and performs less logical reads: CREATE TABLE #MyTable(RGN VARCHAR(20) NOT NULL, CD VARCHAR(20) NOT NULL, PRIMARY KEY([RGN],[CD])); INSERT INTO #MyTable(RGN, CD) SELECT RGN, CD FROM TASK_REQUESTS WHERE TASK='UPDATE_MEM_BAL'; SELECT T.RGN, T.CD, T.FUND_CD, T.TRDT, SUM(T2.UNITS) AS TotalUnits FROM dbo.TRANS AS T JOIN dbo.TRANS AS T2 ON T2.RGN=T.RGN AND T2.CD=T.CD AND T2.FUND_CD=T.FUND_CD AND T2.TRDT<=T.TRDT JOIN #MyTable AS T3 ON T3.CD=T.CD AND T3.RGN=T.RGN GROUP BY T.RGN, T.CD, T.FUND_CD, T.TRDT (4447 row(s) affected) Table 'Worktable'. Scan count 5974, logical reads 382339, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. Table 'TRANSACTIONS'. Scan count 4, logical reads 4547, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. Table '#MyTable________________________________________________________________000000000013'. Scan count 1, logical reads 2, physical reads 0, read-ahead reads 0, lob logical reads 0, lob physical reads 0, lob read-ahead reads 0. SQL Server Execution Times: CPU time = 1420 ms, elapsed time = 1515 ms. The interesting thing for me is that the TASK_REQUEST table is a small table (3 rows at present) and statistics are up to date on the table. Any idea why such different execution plans and execution times would be occuring? And ideally how to change things so that I don't need to use the temp table to get decent performance? The only real difference in the execution plans is that the temp table version introduces an index spool (eager spool) operation.

  Read the article

• Hot to get rid of memory allocations/deallocations in swig wrappers?

  - by Dmitriy Matveev

  I want to use swig for generation of read-only wrappers for a complex object. The object which I want to wrap will always be existent while I will read it. And also I will only use my wrappers at the time that object is existent, thus I don't need any memory management from SWIG. For following swig interface: %module test %immutable; %inline %{ struct Foo { int a; }; struct Bar { int b; Foo f; }; %} I will have a wrappers which will have a lot of garbage in generated interfaces and do useless work which will reduce performance in my case. Generated java wrapper for Bar class will be like this: public class Bar { private long swigCPtr; protected boolean swigCMemOwn; protected Bar(long cPtr, boolean cMemoryOwn) { swigCMemOwn = cMemoryOwn; swigCPtr = cPtr; } protected static long getCPtr(Bar obj) { return (obj == null) ? 0 : obj.swigCPtr; } protected void finalize() { delete(); } public synchronized void delete() { if (swigCPtr != 0) { if (swigCMemOwn) { swigCMemOwn = false; testJNI.delete_Bar(swigCPtr); } swigCPtr = 0; } } public int getB() { return testJNI.Bar_b_get(swigCPtr, this); } public Foo getF() { return new Foo(testJNI.Bar_f_get(swigCPtr, this), true); } public Bar() { this(testJNI.new_Bar(), true); } } I don't need 'swigCMemOwn' field in my wrapper since it always will be false. All code related to this field will also be useless. There are also unnecessary logic in native code: SWIGEXPORT jlong JNICALL Java_some_testJNI_Bar_1f_1get(JNIEnv *jenv, jclass jcls, jlong jarg1, jobject jarg1_) { jlong jresult = 0 ; struct Bar *arg1 = (struct Bar *) 0 ; Foo result; (void)jenv; (void)jcls; (void)jarg1_; arg1 = *(struct Bar **)&jarg1; result = ((arg1)->f); { Foo * resultptr = (Foo *) malloc(sizeof(Foo)); memmove(resultptr, &result, sizeof(Foo)); *(Foo **)&jresult = resultptr; } return jresult; } I don't need these calls to malloc and memmove. I want to force swig to resolve both of these problems, but don't know how. Is it possible?

  Read the article

• Adding a clustered index to a SQL table: what dangers exist for a live production system?

  - by MoSlo

  Right, keep in mind i need to describe this by abstracting all possible confidential info: I've been put in charge of a 10-year old transactional system of which the majority business logic is implemented at database level (triggers, stored procedures etc). Win2000 server, MSSQL 2000 Enterprise. No immediate plans for replacing/updating the system are being considered :( The core process is a program that executes transactions - specifically, it executes a stored procedure with various parameters, lets call it sp_ProcessTrans. The program executes the stored procedure at asynchronous intervals. By itself, things work fine. But there are 30 instances of this program on remotely located workstations, all of them asynchronously executing sp_ProcessTrans and then retrieving data from the SQL server (execution is pretty regular - ranging 0 to 60 times a minute, depending on what items the program instance is responsible for) . Performance of the system has dropped considerably with 10 yrs of data growth: the reason is the deadlocks and specifically deadlock wait times. The deadlock is on the Employee table. I have discovered: In sp_ProcessTrans' execution, it selects from an Employee table 7 times (dont ask) The select is done on a field that is NOT the primary key No index exists on this field. Thus a table scan is performed. 7 times. per transaction So the reason for deadlocks is clear. I created a non-unique ordered clustered index on the field (field looks good, almost unique, NUM(7), very rarely changes). Immediate improvement in the test environment. The problem is that i cannot simulate the deadlocks in a test environment (I'd need 30 workstations; i'd need to simulate 'realistic' activity on those stations, so visualization is out). I need to know if i must schedule downtime. Creating an index shouldn't be a risky operation for MSSQL, but is there any danger (data corruption in transactions/select statements/extra wait time etc) to create this field index on the production database while the transactions are still taking place? (although i can select a time when transactions are fairly quiet through the 30 stations) Are there any hidden dangers i'm not seeing (not looking forward to needing to restore the DB if something goes wrong, restoring would take a lot of time with 10yrs of data).

  Read the article

• Should I HttpCombine Google Jquery Hosted File?

  - by chobo2

  Hi I am using something called HttpCombiner: http://code.msdn.microsoft.com/HttpCombiner An HTTP handler that combines multiple CSS, Javascript or URL into one response for faster page load. It can combine, compress and cache response which results in faster page load and better scalability of web application It's a good practice to use many small Javascript and CSS files instead of one large Javascript/CSS file for better code maintainability, but bad in terms of website performance. Although you should write your Javascript code in small files and break large CSS files into small chunks but when browser requests those javascript and css files, it makes one Http request per file. Every Http Request results in a network roundtrip form your browser to the server and the delay in reaching the server and coming back to the browser is called latency. So, if you have four javascripts and three css files loaded by a page, you are wasting time in seven network roundtrips. Within USA, latency is average 70ms. So, you waste 7x70 = 490ms, about half a second of delay. Outside USA, average latency is around 200ms. So, that means 1400ms of waiting. Browser cannot show the page properly until Css and Javascripts are fully loaded. So, the more latency you have, the slower page loads. You can reduce the wait time by using a CDN. Read my previous blog post about using CDN. However, a better solution is to deliver multiple files over one request using an HttpHandler that combines several files and delivers as one output. So, instead of putting many or tag, you just put one and one tag, and point them to the HttpHandler. You tell the handler which files to combine and it delivers those files in one response. This saves browser from making many requests and eliminates the latency. This Http Handler reads the file names defined in a configuration and combines all those files and delivers as one response. It delivers the response as gzip compressed to save bandwidth. Moreover, it generates proper cache header to cache the response in browser cache, so that, browser does not request it again on future visit. Now I am wondering since it can handle adding links should I put in it the jquery file? The reason I am not sure is if it gets combined with my other files I think I might close the advantages of it being hosted on googles servers such as caching(my thinking is if it gets combined it will look different so even if a user has it in it's cache I am not sure if it will use the one for the cahce or not). So should I combine it or only the finals that I am using locally?

  Read the article

• Problems with starting windows service on windows xp SP3

  - by Michiel Peeters

  I'm currently facing a problem which I can not resolve and I really don't know what to do anymore. When I'm trying to start the service I receive the message: "The service is started but again also stopped, this because that some of the services will stop if they have nothing to do, for example the performance logs and the alerts service". I've looked into the Windows Logs but nothing is written there which could describe why my service is all the time stopping. I've also tried to fire the windows service via the command prompt which gives me the message: "The service is not started, but the service didn't return any faults.". I've tried to remove all keys which references to my service, which didn't resolve the issue. I've searched on google (maybe not good enough) to find an answer but I didn't found any. I did found some websites which describes what I could do, but all of these suggestions didn't work. This is kinda ** because I do not know where to look. I do not have any error message, i do not have any id which i can use to search on. I really don't know where to start and I hope you guys can help me on this one. Detailed explanation about the windows service OS: Windows XP SP3 .Net Framework: .Net 4.0 Client Profile Language: C# Development environment: Visual Studio 2010 Professional (but Visual Studio 2012 RC is installed) Communications: WCF (Named Pipes), WCF (BasicHTTPBinding) Named Pipes: I have chosen for this solution because I wanted to communicate from a windows service to a windows form application. It worked now for quite some time but suddenly my windows service shuts it self down and I couldn't restart it anymore. There are two named pipes services implemented: An event service which will send any notification to the windows form application and an management service which gives my windows form application the possibility to maintain my windows service. BasicHTTPBinding: The basic http binding makes the connection to a central server. This connection is then used for streaming information from the client to the server. I do not know which additional information you will need, but if you guys need something then I'll try to give it as detailed as possible. Thank you in advance.

  Read the article

• AudioTrack lag: obtainBuffer timed out

  - by BTR

  I'm playing WAVs on my Android phone by loading the file and feeding the bytes into AudioTrack.write() via the FileInputStream BufferedInputStream DataInputStream method. The audio plays fine and when it is, I can easily adjust sample rate, volume, etc on the fly with nice performance. However, it's taking about two full seconds for a track to start playing. I know AudioTrack has an inescapable delay, but this is ridiculous. Every time I play a track, I get this: 03-13 14:55:57.100: WARN/AudioTrack(3454): obtainBuffer timed out (is the CPU pegged?) 0x2e9348 user=00000960, server=00000000 03-13 14:55:57.340: WARN/AudioFlinger(72): write blocked for 233 msecs, 9 delayed writes, thread 0xba28 I've noticed that the delayed write count increases by one every time I play a track -- even across multiple sessions -- from the time the phone has been turned on. The block time is always 230 - 240ms, which makes sense considering a minimum buffer size of 9600 on this device (9600 / 44100). I've seen this message in countless searches on the Internet, but it usually seems to be related to not playing audio at all or skipping audio. In my case, it's just a delayed start. I'm running all my code in a high priority thread. Here's a truncated-yet-functional version of what I'm doing. This is the thread callback in my playback class. Again, this works (only playing 16-bit, 44.1kHz, stereo files right now), it just takes forever to start and has that obtainBuffer/delayed write message every time. public void run() { // Load file FileInputStream mFileInputStream; try { // mFile is instance of custom file class -- this is correct, // so don't sweat this line mFileInputStream = new FileInputStream(mFile.path()); } catch (FileNotFoundException e) {} BufferedInputStream mBufferedInputStream = new BufferedInputStream(mFileInputStream, mBufferLength); DataInputStream mDataInputStream = new DataInputStream(mBufferedInputStream); // Skip header try { if (mDataInputStream.available() > 44) mDataInputStream.skipBytes(44); } catch (IOException e) {} // Initialize device mAudioTrack = new AudioTrack(AudioManager.STREAM_MUSIC, ConfigManager.SAMPLE_RATE, AudioFormat.CHANNEL_CONFIGURATION_STEREO, AudioFormat.ENCODING_PCM_16BIT, ConfigManager.AUDIO_BUFFER_LENGTH, AudioTrack.MODE_STREAM); mAudioTrack.play(); // Initialize buffer byte[] mByteArray = new byte[mBufferLength]; int mBytesToWrite = 0; int mBytesWritten = 0; // Loop to keep thread running while (mRun) { // This flag is turned on when the user presses "play" while (mPlaying) { try { // Check if data is available if (mDataInputStream.available() > 0) { // Read data from file and write to audio device mBytesToWrite = mDataInputStream.read(mByteArray, 0, mBufferLength); mBytesWritten += mAudioTrack.write(mByteArray, 0, mBytesToWrite); } } catch (IOException e) { } } } } If I can get past the artificially long lag, I can easily deal with the inherit latency by starting my write at a later, predictable position (ie, skip past the minimum buffer length when I start playing a file).

  Read the article

• Delete duplicate rows, do not preserve one row

  - by Radley

  I need a query that goes through each entry in a database, checks if a single value is duplicated elsewhere in the database, and if it is - deletes both entries (or all, if more than two). Problem is the entries are URLs, up to 255 characters, with no way of identifying the row. Some existing answers on Stackoverflow do not work for me due to performance limitations, or they use uniqueid which obviously won't work when dealing with a string. Long Version: I have two databases containing URLs (and only URLs). One database has around 3,000 urls and the other around 1,000. However, a large majority of the 1,000 urls were taken from the 3,000 url database. I need to merge the 1,000 into the 3,000 as new entries only. For this, I made a third database with combined URLs from both tables, about 4,000 entries. I need to find all duplicate entries in this database and delete them (Both of them, without leaving either). I have followed the query of a few examples on this site, but whenever I try to delete both entries it ends up deleting all the entries, or giving sql errors. Alternatively: I have two databases, each containing the separate database. I need to check each row from one database against the other to find any that aren't duplicates, and then add those to a third database. Edit: I've got my own PHP solution which is pretty hacky, but works. I cannot answer my own question for 8 hours because I'm new, so here it is for now: I went with a PHP script to accomplish this, as I'm more familiar with PHP than MySQL. This generates a simple list of urls that only exist in the target database, but not both. If you have more than 7,000 entries to parse this may take awhile, and you will need to copy/paste the results into a text file or expand the script to store them back into a database. I'm just doing it manually to save time. Note: Uses MeekroDB <pre> <?php require('meekrodb.2.1.class.php'); DB::$user = 'root'; DB::$password = ''; DB::$dbName = 'testdb'; $all = DB::query('SELECT * FROM old_urls LIMIT 7000'); foreach($all as $row) { $test = DB::query('SELECT url FROM new_urls WHERE url=%s', $row['url']); if (!is_array($test)) { echo $row['url'] . "\n"; }else{ if (count($test) == 0) { echo $row['url'] . "\n"; } } } ?> </pre>

  Read the article

• I can't click the links in Firefox and Chrome (they work in IE7)

  - by janoChen

  Its the weirdest thing I've ever seen. I can't click the last 3 links in the following code (when I use FF or Chrome): HTML: <div id="leftmanulist"> <div class="abouttop"> <ul class="aboutlist"> <li class="index"><a>????</a></li> <li><a href="instruments.html">????</a></li> <li><a href="performance.html">????</a></li> <li><a href="clothes.html">????</a></li> <li><a href="aboutfalundafa.html">??????</a></li> <li><a href="awards.html">????</a></li> </ul> </div> <div class="aboutbutton"></div> </div> CSS: #leftmanulist{ background:url("images/abouttop.gif") no-repeat; float: left; margin: 2px 2px 5px 30px; padding:39px 0 0 0; width:237px;} #leftmanulist ul li{line-height:35px;text-align:left; text-decoration:none;} #leftmanulist ul li a{ text-decoration:none;} #leftmanulist ul li:hover{ color:#0068FF;} #leftmanulist ul li a:hover{ color:#0068FF;} #leftmanulist ul li.index{ color:#0068FF;} #leftmanulist ul li.index a{ color:#0068FF;} .abouttop{background:url("images/leftmanulist_z.gif") repeat-y ; padding:0 6px; position:relative; z-index:0; width:237px;} .aboutlist{position:relative;left:28px;} .aboutbutton{background:url("images/leftmanulist_b.gif") no-repeat; width:237px; height:20px; position:relative; top:-17px; z-index:2;}

  Read the article

• Asyncronous While Loop?

  - by o7th Web Design

  I have a pretty great SqlDataReader wrapper in which I can map the output into a strongly typed list. What I am finding now is that on larger datasets with larger numbers of columns, performance could probably be a bit better if I can optimize my mapping. In thinking about this there is one section in particular that I am concerned about as it seems to be the heaviest hitter: while (_Rdr.Read()) { T newObject = new T(); for (int i = 0; i <= _Rdr.FieldCount - 1; ++i) { PropertyInfo info = (PropertyInfo)_ht[_Rdr.GetName(i).ToUpper()]; if ((info != null) && info.CanWrite) { info.SetValue(newObject, (_Rdr.GetValue(i) is DBNull) ? default(T) : _Rdr.GetValue(i), null); } } _en.Add(newObject); } _Rdr.Close(); What I would really like to know, is if there is a way that I can make this loop asyncronous? I feel that will make all the difference in the world with this beast :) Here is the entire Map method in case anyone can see where I can make further improvements on it... IList<T> Map<T> // Map our datareader object to a strongly typed list private static IList<T> Map<T>(IDataReader _Rdr) where T : new() { try { Type _t = typeof(T); List<T> _en = new List<T>(); Hashtable _ht = new Hashtable(); PropertyInfo[] _props = _t.GetProperties(); Parallel.ForEach(_props, info => { _ht[info.Name.ToUpper()] = info; }); while (_Rdr.Read()) { T newObject = new T(); for (int i = 0; i <= _Rdr.FieldCount - 1; ++i) { PropertyInfo info = (PropertyInfo)_ht[_Rdr.GetName(i).ToUpper()]; if ((info != null) && info.CanWrite) { info.SetValue(newObject, (_Rdr.GetValue(i) is DBNull) ? default(T) : _Rdr.GetValue(i), null); } } _en.Add(newObject); } _Rdr.Close(); return _en; }catch(Exception ex){ _Msg += "Wrapper.Map Exception: " + ex.Message; ErrorReporting.WriteEm.WriteItem(ex, "o7th.Class.Library.Data.Wrapper.Map", _Msg); return default(IList<T>); } }

  Read the article

• Useful software for netbook?

  - by Moayad Mardini

  I'm looking for recommendations of good software that are particularly useful for netbooks. Software that run great on small screens and low CPU/RAM requirments. I'll start off with the following : Operating Systems: Ubuntu Netbook Remix. Easy Peasy: A fork of Ubuntu Netbook Remix that was once called UBuntu EEE. It isn't just for eeePCs though. Definitely worth a look if vanilla Netbook Remix isn't cutting it. (MarkM) Damn Small Linux (Source) Windows 7: With trimming the installation or compressing the Windows directory to fit on an 8GB SSD. (Will Eddins) nLite: A utility to install a lightweight version of Windows XP without the unnecessary components (like Media Player, Internet Explorer, Outlook Express, MSN Explorer, Messenger...). Utilites: TouchFreeze: To disable the touch pad while typing (Source) InSSIDer: Not only does it make it easier to find and keep a wireless connection, but it turns a netbook into the perfect mobile tool for troubleshooting wireless networks. (phenry) AltMove: Adds more functionality to your mouse for interacting with windows. (Rob) ASUS Font Resizer Utility and other tools by ASUS, specific to ASUS Eee PC series. Internet: Run FileZilla FTP client for a small screen : You can hide a lot of FileZilla's interface parts in the View menu, even the directory trees. Go into Settings = Interface and move the message log next to the transfer queue, if you haven't hidden them both or you want to see them. Select a theme with 16x16 icons. (Source) IDEs and Text Editors: Best lightweight IDE/Text Editor: A question on Stack Overflow that has many good suggestions of IDEs and general text editors for programmers. What’s a good linux C/C++ IDE for a low-res screen?: IDEs for Linux-powered netbooks. Online tools: Dropbox: Since the Netbook has limited disk space, you would like to use Cloud Apps like Dropbox and Ubuntu One so that you don't run out of space especially if you are on a holiday. Later when you go back to your desktop with big hard disk,you can take out the files from your dropbox repo. (Manish Sinha) Google products: like Docs, Calendar and Reader (aviraldg) Web sites and software lists: Netbookfiles.com: Netbook specific software downloads. Software Apps to Maximise your Netbook Battery Power: Netbooks are known for their portability. Not only are they small and lightweight but with their increased power efficiency, batteries can last much longer than conventional laptops. This also means you no longer have to carry a power adapter with you! Several brands emphasis the longevity of the battery as a strong selling point, and for those people who travel a lot, it sure is. Free Must-Have Netbook Apps: Finding software for netbooks can present challenges due to limited hard drive space, processor power, RAM, and screen real-estate. That doesn't mean you have to do without essential programs. The apps below cover all the bases -- entertainment, productivity, security, and communication -- without compromising on performance or usability. Best of all, they're free! Useful Netbook Software: With short battery lives and small resolution screens Netbooks, unlike many other computers on the market, could so with some specific software for their use. Now, not all of those I’ve found are specifically designed for Netbooks, but all are relevant. And they’re designed for Windows XP. The question is community wiki, so feel free to edit it. Updated, thank you all for suggestions.

  Read the article

• Useful Command-line Commands on Windows

  - by Sung Meister

  The aim for this Wiki is to promote using a command to open up commonly used applications without having to go through many mouse clicks - thus saving time on monitoring and troubleshooting Windows machines. Answer entries need to specify Application name Commands Screenshot (Optional) Shortcut to commands && - Command Chaining %SYSTEMROOT%\System32\rcimlby.exe -LaunchRA - Remote Assistance (Windows XP) appwiz.cpl - Programs and Features (Formerly Known as "Add or Remove Programs") appwiz.cpl @,2 - Turn Windows Features On and Off (Add/Remove Windows Components pane) arp - Displays and modifies the IP-to-Physical address translation tables used by address resolution protocol (ARP) at - Schedule tasks either locally or remotely without using Scheduled Tasks bootsect.exe - Updates the master boot code for hard disk partitions to switch between BOOTMGR and NTLDR cacls - Change Access Control List (ACL) permissions on a directory, its subcontents, or files calc - Calculator chkdsk - Check/Fix the disk surface for physical errors or bad sectors cipher - Displays or alters the encryption of directories [files] on NTFS partitions cleanmgr.exe - Disk Cleanup clip - Redirects output of command line tools to the Windows clipboard cls - clear the command line screen cmd /k - Run command with command extensions enabled color - Sets the default console foreground and background colors in console command.com - Default Operating System Shell compmgmt.msc - Computer Management control.exe /name Microsoft.NetworkAndSharingCenter - Network and Sharing Center control keyboard - Keyboard Properties control mouse(or main.cpl) - Mouse Properties control sysdm.cpl,@0,3 - Advanced Tab of the System Properties dialog control userpasswords2 - Opens the classic User Accounts dialog desk.cpl - opens the display properties devmgmt.msc - Device Manager diskmgmt.msc - Disk Management diskpart - Disk management from the command line dsa.msc - Opens active directory users and computers dsquery - Finds any objects in the directory according to criteria dxdiag - DirectX Diagnostic Tool eventvwr - Windows Event Log (Event Viewer) explorer . - Open explorer with the current folder selected. explorer /e, . - Open explorer, with folder tree, with current folder selected. F7 - View command history find - Searches for a text string in a file or files findstr - Find a string in a file firewall.cpl - Opens the Windows Firewall settings fsmgmt.msc - Shared Folders fsutil - Perform tasks related to FAT and NTFS file systems ftp - Transfers files to and from a computer running an FTP server service getmac - Shows the mac address(es) of your network adapter(s) gpedit.msc - Group Policy Editor gpresult - Displays the Resultant Set of Policy (RSoP) information for a target user and computer httpcfg.exe - HTTP Configuration Utility iisreset - To restart IIS InetMgr.exe - Internet Information Services (IIS) Manager 7 InetMgr6.exe - Internet Information Services (IIS) Manager 6 intl.cpl - Regional and Language Options ipconfig - Internet protocol configuration lusrmgr.msc - Local Users and Groups Administrator msconfig - System Configuration notepad - Notepad? ;) mmsys.cpl - Sound/Recording/Playback properties mode - Configure system devices more - Displays one screen of output at a time mrt - Microsoft Windows Malicious Software Removal Tool mstsc.exe - Remote Desktop Connection nbstat - displays protocol statistics and current TCP/IP connections using NBT ncpa.cpl - Network Connections netsh - Display or modify the network configuration of a computer that is currently running netstat - Network Statistics net statistics - Check computer up time net stop - Stops a running service. net use - Connects a computer to or disconnects a computer from a shared resource, or displays information about computer connections odbcad32.exe - ODBC Data Source Administrator pathping - A traceroute that collects detailed packet loss stats perfmon - Opens Reliability and Performance Monitor ping - Determine whether a remote computer is accessible over the network powercfg.cpl - Power management control panel applet quser - Display information about user sessions on a terminal server qwinsta - See disconnected remote desktop sessions reg.exe - Console Registry Tool for Windows regedit - Registry Editor rasdial - Connects to a VPN or a dialup network robocopy - Backup/Restore/Copy large amounts of files reliably rsop.msc - Resultant Set of Policy (shows the combined effect of all group policies active on the current system/login) runas - Run specific tools and programs with different permissions than the user's current logon provides sc - Manage anything you want to do with services. schtasks - Enables an administrator to create, delete, query, change, run and end scheduled tasks on a local or remote system. secpol.msc - Local Security Settings services.msc - Services control panel set - Displays, sets, or removes cmd.exe environment variables. set DIRCMD - Preset dir parameter in cmd.exe start - Starts a separate window to run a specified program or command start. - opens the current directory in the Windows Explorer. shutdown.exe - Shutdown or Reboot a local/remote machine subst.exe - Associates a path with a drive letter, including local drives systeminfo -Displays a comprehensive information about the system taskkill - terminate tasks by process id (PID) or image name tasklist.exe - List Processes on local or a remote machine taskmgr.exe - Task Manager telephon.cpl - Telephone and Modem properties timedate.cpl - Date and Time title - Change the title of the CMD window you have open tracert - Trace route wmic - Windows Management Instrumentation Command-line winver.exe - Find Windows Version wscui.cpl - Windows Security Center wuauclt.exe - Windows Update AutoUpdate Client

  Read the article

• Tomcat running, catalina throwing exception

  - by Mark Steudel

  So I have to preface that I'm not familiar with tomcat/catalina, but trying to troubleshoot this anyway. Anyway I see in /var/log/tomcat5/catalina.out I'm seeing these errors: Using CATALINA_BASE: /usr/share/tomcat5 Using CATALINA_HOME: /usr/share/tomcat5 Using CATALINA_TMPDIR: /usr/share/tomcat5/temp Using JRE_HOME: java.lang.ClassNotFoundException: org.apache.catalina.startup.Catalina at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at org.apache.catalina.startup.Bootstrap.init(Bootstrap.java:223) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:410) I'm not really sure what this means. This installation was working a week ago ... did something get corrupted? How would I figure if it did ... what other information would be valuable here? Tomcat seems to be running and starting up fine ... UPDATE: this might be related: Jun 19, 2011 11:00:25 PM org.apache.coyote.http11.Http11BaseProtocol pause INFO: Pausing Coyote HTTP/1.1 on http-9080 Jun 19, 2011 11:00:26 PM org.apache.catalina.core.StandardService stop INFO: Stopping service Catalina log4j:ERROR LogMananger.repositorySelector was null likely due to error in class reloading, using NOPLoggerRepository. Some more stuff in the logs: 2011-06-12 23:04:45,223 INFO [main] [com.atlassian.confluence.lifecycle] contextInitialized Starting Confluence 3.1.1 (build #1724) 2011-06-12 23:04:45,663 INFO [main] [beans.factory.xml.XmlBeanDefinitionReader] loadBeanDefinitions Loading XML bean definitions from c lass path resource [bootstrapContext.xml] 2011-06-12 23:04:46,134 INFO [main] [beans.factory.xml.XmlBeanDefinitionReader] loadBeanDefinitions Loading XML bean definitions from c lass path resource [setupContext.xml] 2011-06-12 23:04:46,236 INFO [main] [beans.factory.xml.XmlBeanDefinitionReader] loadBeanDefinitions Loading XML bean definitions from c lass path resource [bootstrapCacheContext.xml] 2011-06-12 23:04:47,571 INFO [main] [atlassian.plugin.manager.DefaultPluginManager] init Initialising the plugin system 2011-06-12 23:04:48,338 INFO [main] [atlassian.plugin.manager.DefaultPluginManager] init Plugin system started in 0:00:00.748 Jun 12, 2011 11:05:05 PM org.apache.catalina.startup.Catalina stopServer SEVERE: Catalina.stop: java.net.ConnectException: Connection refused at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) at java.net.Socket.connect(Socket.java:525) at java.net.Socket.connect(Socket.java:475) at java.net.Socket.<init>(Socket.java:372) at java.net.Socket.<init>(Socket.java:186) at org.apache.catalina.startup.Catalina.stopServer(Catalina.java:395) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.catalina.startup.Bootstrap.stopServer(Bootstrap.java:344) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:435) Jun 12, 2011 11:05:44 PM org.apache.catalina.core.AprLifecycleListener lifecycleEvent INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.pa th: /usr/java/jdk1.6.0_18/jre/lib/i386/client:/usr/java/jdk1.6.0_18/jre/lib/i386:/usr/java/jdk1.6.0_18/jre/../lib/i386:/usr/java/packag es/lib/i386:/lib:/usr/lib CLEAN LOG OUTPUT FROM STARTING TOMCAT: Using CATALINA_BASE: /usr/share/tomcat5 Using CATALINA_HOME: /usr/share/tomcat5 Using CATALINA_TMPDIR: /usr/share/tomcat5/temp Using JRE_HOME: java.lang.ClassNotFoundException: org.apache.catalina.startup.Catalina at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at org.apache.catalina.startup.Bootstrap.init(Bootstrap.java:223) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:410) So I did a /etc/rc.d/init.d/tomcat status and I get this: [wqadm1n@ip-72-167-51-178 proc]$ sudo /etc/rc.d/init.d/tomcat5 status /etc/rc.d/init.d/tomcat5 is stopped [wqadm1n@ip-72-167-51-178 proc]$ sudo /etc/rc.d/init.d/tomcat5 start Starting tomcat5: [ OK ] [wqadm1n@ip-72-167-51-178 proc]$ sudo /etc/rc.d/init.d/tomcat5 status lock file found but no process running for pid 30774

  Read the article

< Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508  | Next Page >