Search Results

Search found 15099 results on 604 pages for 'runtime environment'.

Page 501/604 | < Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508  | Next Page >

  • RDA Health Checks for SOA

    - by ShawnBailey
    What is a health check in RDA? A health check evaluates something in your environment to determine whether a change needs to be considered in order to avoid a problem or optimize fuctionality. Examples of what this 'something' might be are: Configuration Parameters JVM Options Runtime Statistics What have we done for SOA? In the latest release of RDA, 4.30, we have added a Rule Set for SOA called 'Oracle SOA 11g (11.1.1) Post Installation (Generic)'. This Rule Set contains 14 SOA related health checks. These checks were all derived from common issues / solutions we see in support of the SOA product. Many of the recommendations come from the product documentation while others are covered in the SOA Knowledge Base. Our goal is that you will be able to easily identify the areas of concern and understand the guidance available from the output of the Rule Set. Running the health checks for SOA The rules that the checks use are installed with RDA and bundled by product or functional area into what are called 'Rule Sets'. To view the available Rule Sets simply run the command from the RDA home location: rda.cmd (or .sh) -dT hcve This will bring up a list of the available HCVE (Health Check / Verification Engine) Rule Sets. Each Rule Set contains a group of related rules that are used for evalutation and display of results. A rule can be considered synonymous with a single health check and they are assigned an ID, Name and Description that can be seen when they are executed. The Rule Set for SOA is option number 11 and you just enter this selection at the prompt. The Rule Set will then execute to completion. After running an HCVE Rule Set the tool will write the output to the RDA_HOME/output folder. The simplest way to view the output is to drag the .htm file to a browser but of course it can also be uploaded to a Service Request for evaluation by Oracle Support. Many of the Rule Sets will prompt you for information before they can execute their rules but the SOA Rule Set will identify the SOA domains configured in your RDA setup.cfg file. This means that you don't need to answer all of the questions again about where stuff is but it also means that you must have configured RDA for SOA. To run the Rule Set: Download the latest version of RDA from MOS Doc ID 314422.1 Configure RDA for your SOA domains. Detailed steps can be found here In it's simplest form the command is 'rda.cmd (.sh) -S SOA' Go to the RDA home location and enter the command 'rda.cmd (or .sh) -dT hcve' Select option '11' It should be noted that this our first release of a SOA Rule Set so there will probably be some things we need to clean up or fix. None of these rules will actually modify anything on your system as they are read only and do the evaluations internally. Please let us know if you have any issues with the rules or ideas for new ones so we can make them as useful as possible. The Checks Here is a list of the SOA health checks by ID, Name and Description. ID Name Description A00100 SOA Domain Homes Lists the SOA domains that were indentified from the RDA setup.cfg file A00200 Coherence Protocol Conflict Checks to see if you have both Unicast and Multicast configured in the same domain. Checks both the setDomainEnv and config.xml entries (if it exists). We recommend Unicast with fully qualified host names or IP addresses. A00210 Coherence Fully Qualified Host Checks that the host names are fully qualified or that IP addresses are used. Will fail if unqualified host names are detected. A00220 Unicast Local Host Checks that the Coherence localhost is specified for use with Unicast A00300 JTA Timeout Checks that the JTA timeout is configured for the domain and lists the value. The bundled rule will only list the current values of the JTA timeout for each SOA Domain. In the future the rule with fail with a warning if the value is 300 seconds or lower. It is recommended that timeouts follow the pattern 'syncMaxWaitTime' < EJB Timeouts < JTA Timeout. The 300 second value is important because the EJB Timeouts default to 300 seconds. Additional information can be found in MOS Doc ID 880313.1. A00310 XA Max Time Checks that the JTA Maximum XA call time is set for the domain. Fails if it is not explicitly set or if the value is less than or equal to the default of 12000 ms. A00320 XA Timeout Checks that the XA timeout is enabled and that the value is '0' for the SOA Data Source (SOADataSource-jdbc.xml) A00330 JDBC Statement Timeout Checks that the Statement Timeout is set for all SOA Data Sources. Fails if the value is not set or if it is set to the default of -1. A00400 XA Driver Checks that the SOA Data Source is configured to use an XA driver. Fails if it is not. A00410 JDBC Capacity Settings Checks that the minimum and maximum capacity are equal for all SOA Data Sources. Fails if they are not and lists specifically which data sources failed. A00500 SOA Roles Checks that the default SOA roles 'SOAAdmin' and 'SOAOperator' are configured for the soa-infra application in the file sytem-jazn-data.xml. Fails if they are not. A00700 SOA-INFRA Deployment Checks that the soa-infra application is deployed to either a cluster, all members of a cluster or a stand alone server. A00710 SOA Deployments Checks that the SOA related applications are deployed to the same domain members as soa-infra. A00720 SOA Library Deployments Checks that the SOA related libraries are deployed to the same domain members as soa-infra. A00730 Data Source Deployments Checks that the SOA Data Sources are all targeted to the same domain members as soa-infra

    Read the article

  • Certify August Updates

    - by Sadia2
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 We have added some release and platform certifications to MOS Certify. Applications : Oracle Demantra Demand Management 7.3.1.5, Oracle Demantra Predictive Trade Planning 7.3.1.5, Oracle Demantra Sales and Operations Planning 7.3.1.5 Database: Oracle Database Client 12.1.0.1.0 11.2.0.4.0, Oracle Clusterware 11.2.0.4.0, Oracle Database 11.2.0.4.0, Oracle Real Application Clusters 11.2.0.4.0 E-Business Suite: Oracle E-Business Suite 12.1.3, Oracle E-Business Suite 12.1.2, Oracle E-Business Suite 12.1.1, Oracle E-Business Suite 12.0.6, Oracle E-Business Suite 11.5.10.2 Edge Applications: Oracle Transportation Management 6.3.2 Enterprise Manager: Oracle Application Management Pack for Oracle E-Business Suite 12.1.0.1.0 Fusion Middleware: Discoverer Administrator 11.1.1.6.0, Discoverer Desktop 11.1.1.6.0, Forms Builder 11.1.1.6.0, Oracle Application Development Framework 11.1.1.6.0, Oracle Application Development Runtime 11.1.1.6.0, Oracle Business Intelligence Publisher 11.1.1.6.0, Oracle Directory Services Manager 11.1.1.6.0, Oracle Forms 11.1.1.6.0, Oracle GoldenGate 11.1.1.1.0, 11.1.1.1.2, 11.1.1.1.1, Oracle GoldenGate Application Adapters 11.1.1.1.1, Oracle Identity and Access Management 11.1.2.0.0, 11.1.2.1.0, Oracle Identity Federation 11.1.1.6.0, Oracle Real-Time Decision Load Generator 11.1.1.7.0, Oracle Real-Time Decision Studio 11.1.1.7.0, Oracle Real-Time Decisions 11.1.1.6.0, Oracle Reports 11.1.1.6.0, Oracle Segmentation Server 11.1.1.6.0, Oracle Virtual Directory 11.1.1.6.0, Oracle Web Cache 11.1.1.6.0, Oracle WebCenter Content Imaging 11.1.1.8.0, Oracle WebCenter Content Inbound Refinery Server 11.1.1.8.0, Oracle WebCenter Content Records 11.1.1.8.0, Oracle WebCenter Content Rights 11.1.1.8.0, Oracle WebCenter Content UI 11.1.1.8.0, Oracle WebCenter Enterprise Capture 11.1.1.8.0, Oracle WebCenter Portal 11.1.1.8.0, Oracle WebCenter Sites 11.1.1.8.0, Oracle WebCenter Sites: CIP for EMC Documentum 11.1.1.8.0, Oracle WebCenter Sites: CIP for File Systems and MS SharePoint 11.1.1.8.0, Oracle WebCenter Sites: Community-Gadgets 11.1.1.8.0, Oracle WebCenter Sites: Explorer 11.1.1.8.0, Oracle WebCenter Universal Content Management 11.1.1.8.0, Reports Builder 11.1.1.6.0, Oracle WebCenter Content Records 11.1.1.8.0, Oracle WebCenter Content Rights 11.1.1.8.0, Oracle WebCenter Content UI 11.1.1.8.0, Oracle WebCenter Sites: Developer Tools 11.1.1.8.0 FSGBU Insurance Group : Oracle Health Insurance Claims 2.13.3.0.0, 2.13.2.0.0, 2.13.1.0.0 JD Edwards EnterpriseOne: JD Edwards EnterpriseOne Tools 9.1.3.0, 9.1.2.0, 9.1.0.0 JD Edwards World: JD Edwards World Service Enablement A93SE, A931SE PeopleSoft: PeopleSoft PeopleTools 8.52 Siebel Enterprise: Siebel Application Server 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0, Siebel CRM Desktop Client 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0, Siebel Database Server 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0, Siebel HI Web Client 8.2.2.2.0, 8.1.1.9.0, Siebel Gateway Server 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0, Siebel Outlook Add-in Client 8.2.2.2.0, Siebel Remote Client 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0, Siebel Tools Client 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0, Siebel Web Server Extension 8.2.2.4.0, 8.2.2.3.0, 8.2.2.2.0, 8.1.1.11.0, 8.1.1.10.0, 8.1.1.9.0 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;}

    Read the article

  • Subterranean IL: Generics and array covariance

    - by Simon Cooper
    Arrays in .NET are curious beasts. They are the only built-in collection types in the CLR, and SZ-arrays (single dimension, zero-indexed) have their own commands and IL syntax. One of their stranger properties is they have a kind of built-in covariance long before generic variance was added in .NET 4. However, this causes a subtle but important problem with generics. First of all, we need to briefly recap on array covariance. SZ-array covariance To demonstrate, I'll tweak the classes I introduced in my previous posts: public class IncrementableClass { public int Value; public virtual void Increment(int incrementBy) { Value += incrementBy; } } public class IncrementableClassx2 : IncrementableClass { public override void Increment(int incrementBy) { base.Increment(incrementBy); base.Increment(incrementBy); } } In the CLR, SZ-arrays of reference types are implicitly convertible to arrays of the element's supertypes, all the way up to object (note that this does not apply to value types). That is, an instance of IncrementableClassx2[] can be used wherever a IncrementableClass[] or object[] is required. When an SZ-array could be used in this fashion, a run-time type check is performed when you try to insert an object into the array to make sure you're not trying to insert an instance of IncrementableClass into an IncrementableClassx2[]. This check means that the following code will compile fine but will fail at run-time: IncrementableClass[] array = new IncrementableClassx2[1]; array[0] = new IncrementableClass(); // throws ArrayTypeMismatchException These checks are enforced by the various stelem* and ldelem* il instructions in such a way as to ensure you can't insert a IncrementableClass into a IncrementableClassx2[]. For the rest of this post, however, I'm going to concentrate on the ldelema instruction. ldelema This instruction pops the array index (int32) and array reference (O) off the stack, and pushes a pointer (&) to the corresponding array element. However, unlike the ldelem instruction, the instruction's type argument must match the run-time array type exactly. This is because, once you've got a managed pointer, you can use that pointer to both load and store values in that array element using the ldind* and stind* (load/store indirect) instructions. As the same pointer can be used for both input and output to the array, the type argument to ldelema must be invariant. At the time, this was a perfectly reasonable restriction, and maintained array type-safety within managed code. However, along came generics, and with it the constrained callvirt instruction. So, what happens when we combine array covariance and constrained callvirt? .method public static void CallIncrementArrayValue() { // IncrementableClassx2[] arr = new IncrementableClassx2[1] ldc.i4.1 newarr IncrementableClassx2 // arr[0] = new IncrementableClassx2(); dup newobj instance void IncrementableClassx2::.ctor() ldc.i4.0 stelem.ref // IncrementArrayValue<IncrementableClass>(arr, 0) // here, we're treating an IncrementableClassx2[] as IncrementableClass[] dup ldc.i4.0 call void IncrementArrayValue<class IncrementableClass>(!!0[],int32) // ... ret } .method public static void IncrementArrayValue<(IncrementableClass) T>( !!T[] arr, int32 index) { // arr[index].Increment(1) ldarg.0 ldarg.1 ldelema !!T ldc.i4.1 constrained. !!T callvirt instance void IIncrementable::Increment(int32) ret } And the result: Unhandled Exception: System.ArrayTypeMismatchException: Attempted to access an element as a type incompatible with the array. at IncrementArrayValue[T](T[] arr, Int32 index) at CallIncrementArrayValue() Hmm. We're instantiating the generic method as IncrementArrayValue<IncrementableClass>, but passing in an IncrementableClassx2[], hence the ldelema instruction is failing as it's expecting an IncrementableClass[]. On features and feature conflicts What we've got here is a conflict between existing behaviour (ldelema ensuring type safety on covariant arrays) and new behaviour (managed pointers to object references used for every constrained callvirt on generic type instances). And, although this is an edge case, there is no general workaround. The generic method could be hidden behind several layers of assemblies, wrappers and interfaces that make it a requirement to use array covariance when calling the generic method. Furthermore, this will only fail at runtime, whereas compile-time safety is what generics were designed for! The solution is the readonly. prefix instruction. This modifies the ldelema instruction to ignore the exact type check for arrays of reference types, and so it lets us take the address of array elements using a covariant type to the actual run-time type of the array: .method public static void IncrementArrayValue<(IncrementableClass) T>( !!T[] arr, int32 index) { // arr[index].Increment(1) ldarg.0 ldarg.1 readonly. ldelema !!T ldc.i4.1 constrained. !!T callvirt instance void IIncrementable::Increment(int32) ret } But what about type safety? In return for ignoring the type check, the resulting controlled mutability pointer can only be used in the following situations: As the object parameter to ldfld, ldflda, stfld, call and constrained callvirt instructions As the pointer parameter to ldobj or ldind* As the source parameter to cpobj In other words, the only operations allowed are those that read from the pointer; stind* and similar that alter the pointer itself are banned. This ensures that the array element we're pointing to won't be changed to anything untoward, and so type safety within the array is maintained. This is a typical example of the maxim that whenever you add a feature to a program, you have to consider how that feature interacts with every single one of the existing features. Although an edge case, the readonly. prefix instruction ensures that generics and array covariance work together and that compile-time type safety is maintained. Tune in next time for a look at the .ctor generic type constraint, and what it means.

    Read the article

  • BPM 11g - Dynamic Task Assignment with Multi-level Organization Units

    - by Mark Foster
    I've seen several requirements to have a more granular level of task assignment in BPM 11g based on some value in the data passed to the process. Parametric Roles is normally the first port of call to try to satisfy this requirement, but in this blog we will show how a lot of use-cases can be satisfied by the easier to implement and flexible Organization Unit. The Use-Case Task assignment is to an approval group containing several users. At runtime, a location value in the input data determines which of the particular users the task is ultimately assigned to. In this case we use the Demo Community referenced in the SOA Admin Guide, and specifically the "LoanAnalyticGroup" which contains three users; "szweig", "mmitch" & "fkafka". In our scenario we would like to assign a task to "szweig" if the input data specifies that the location is "JapanCentral", to "fkafka" if the location is "JapanNorth" and to "mmitch" if "JapanSouth", and to all of them if the location is "Japan" i.e....   The Process Simple one human task process.... In the output data association of the "Start" activity we need to set the value of the "Organization Unit" predefined variable based on the input data (note that the  predefined variables can only be set on output data associations)....  ...and in the output data association of the human activity we will reset the "Organization Unit" to empty, always good practice to ensure that the Organization Unit will not be used for any subsequent human activities for which we do not require it.... Set Up the Organization Unit  Log in to the BPM Workspace with an administrator user (weblogic/welcome1 in our case) and choose the "Administration" option. Within "Roles" assign the "ProcessOwner" swim-lane for our process to "LoanAnalyticGroup".... Within "Organization Units" we can model our organization.... "Root Organization Unit" as "Japan" and "Child Organization Unit" as "Central", "South" & "North" as shown. As described previously, add user "szweig" to "Central", "mmitch" to "South" and "fkafka" to "North"....   Test the Process Invalid Data  First let us test with invalid data in the input to see what the consequences are, here we use "X" as input.... ...and looking at the instance we can see it has errored.... Organization Unit Root Level Assignment  Now let us see what happens if we have "Japan" in the input data.... ...looking in the "flow trace" we can see that the task has been assigned....  ... but who has the task been assigned to ? Let us look in the BPM Workspace for user "szweig"....  ...and for "mmitch"....  ... and for "fkafka"....  ...so we can see that with an Organization Unit at "Root" level we have successfully assigned the task to all users. Organization Unit Child Level Assignment  Now let us test with "Japan/North" in the input data.... ...and looking in "fkafka" workspace we see the task has been assigned, remember, he was associated with "JapanNorth"....   ... but what about the workspace of "szweig"....  ...no tasks assigned, neither has "mmitch", just as we expected. Summary  We have seen in this blog how to easily implement multi-level dynamic task routing using Organization Units, a common use-case and a simpler solution than Parametric Roles. 

    Read the article

  • How to display a dependent list box disabled if no child data exist

    - by frank.nimphius
    A requirement on OTN was to disable the dependent list box of a model driven list of value configuration whenever the list is empty. To disable the dependent list, the af:selectOneChoice component needs to be refreshed with every value change of the parent list, which however already is the case as the list boxes are already dependent. When you create model driven list of values as choice lists in an ADF Faces page, two ADF list bindings are implicitly created in the PageDef file of the page that hosts the input form. At runtime, a list binding is an instance of FacesCtrlListBinding, which exposes getItems() as a method to access a list of available child data (java.util.List). Using Expression Language, the list is accessible with #{bindings.list_attribute_name.items} To dynamically set the disabled property on the dependent af:selectOneChoice component, however, you need a managed bean that exposes the following two methods //empty – but required – setter method public void setIsEmpty(boolean isEmpty) {} //the method that returns true/false when the list is empty or //has values public boolean isIsEmpty() {   FacesContext fctx = FacesContext.getCurrentInstance();   ELContext elctx = fctx.getELContext();   ExpressionFactory exprFactory =                          fctx.getApplication().getExpressionFactory();   ValueExpression vexpr =                       exprFactory.createValueExpression(elctx,                         "#{bindings.EmployeeId.items}",                       Object.class);   List employeesList = (List) vexpr.getValue(elctx);                        return employeesList.isEmpty()? true : false;      } If referenced from the dependent choice list, as shown below, the list is disabled whenever it contains no list data <! --  master list --> <af:selectOneChoice value="#{bindings.DepartmentId.inputValue}"                                  label="#{bindings.DepartmentId.label}"                                  required="#{bindings.DepartmentId.hints.mandatory}"                                   shortDesc="#{bindings.DepartmentId.hints.tooltip}"                                   id="soc1" autoSubmit="true">      <f:selectItems value="#{bindings.DepartmentId.items}" id="si1"/> </af:selectOneChoice> <! --  dependent  list --> <af:selectOneChoice value="#{bindings.EmployeeId.inputValue}"                                   label="#{bindings.EmployeeId.label}"                                      required="#{bindings.EmployeeId.hints.mandatory}"                                   shortDesc="#{bindings.EmployeeId.hints.tooltip}"                                   id="soc2" disabled="#{lovTestbean.isEmpty}"                                   partialTriggers="soc1">     <f:selectItems value="#{bindings.EmployeeId.items}" id="si2"/> </af:selectOneChoice>

    Read the article

  • .NET Winform AJAX Login Services

    - by AdamSane
    I am working on a Windows Form that connects to a ASP.NET membership database and I am trying to use the AJAX Login Service. No matter what I do I keep on getting 404 errors on the Authentication_JSON_AppService.axd call. Web Config Below <?xml version="1.0"?> <!-- Note: As an alternative to hand editing this file you can use the web admin tool to configure settings for your application. Use the Website->Asp.Net Configuration option in Visual Studio. A full list of settings and comments can be found in machine.config.comments usually located in \Windows\Microsoft.Net\Framework\v2.x\Config --> <configuration> <configSections> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere"/> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> <section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication"/> </sectionGroup> </sectionGroup> </sectionGroup> </configSections> <connectionStrings <!-- Removed --> /> <appSettings/> <system.web> <!-- Set compilation debug="true" to insert debugging symbols into the compiled page. Because this affects performance, set this value to true only during development. --> <compilation debug="true"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Data.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> </assemblies> </compilation> <membership defaultProvider="dbSqlMembershipProvider"> <providers> <add name="dbSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="Fire.Common.Properties.Settings.dbFireConnectionString" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression=""/> </providers> </membership> <roleManager enabled="true" defaultProvider="dbSqlRoleProvider"> <providers> <add connectionStringName="Fire.Common.Properties.Settings.dbFireConnectionString" applicationName="/" name="dbSqlRoleProvider" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/> </providers> </roleManager> <authentication mode="Forms"> <forms loginUrl="Login.aspx" cookieless="UseCookies" protection="All" timeout="30" requireSSL="false" slidingExpiration="true" defaultUrl="default.aspx" enableCrossAppRedirects="false"/> </authentication> <authorization> <allow users="*"/> <allow users="?"/> </authorization> <customErrors mode="Off"> </customErrors> <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </controls> </pages> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="GET,HEAD" path="ScriptResource.axd" validate="false" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpModules> </system.web> <location path="~/Admin"> <system.web> <authorization> <allow roles="Admin"/> <allow roles="System"/> <deny users="*"/> </authorization> </system.web> </location> <location path="~/Admin/System"> <system.web> <authorization> <allow roles="System"/> <deny users="*"/> </authorization> </system.web> </location> <location path="~/Export"> <system.web> <authorization> <allow roles="Export"/> <deny users="*"/> </authorization> </system.web> </location> <location path="~/Field"> <system.web> <authorization> <allow roles="Field"/> <deny users="*"/> </authorization> </system.web> </location> <location path="~/Default.aspx"> <system.web> <authorization> <allow roles="Admin"/> <allow roles="System"/> <allow roles="Export"/> <allow roles="Field"/> <deny users="?"/> </authorization> </system.web> </location> <location path="~/Login.aspx"> <system.web> <authorization> <allow users="*"/> <allow users="?"/> </authorization> </system.web> </location> <location path="~/App_Themes"> <system.web> <authorization> <allow users="*"/> <allow users="?"/> </authorization> </system.web> </location> <location path="~/Includes"> <system.web> <authorization> <allow users="*"/> <allow users="?"/> </authorization> </system.web> </location> <location path="~/WebServices"> <system.web> <authorization> <allow users="*"/> <allow users="?"/> </authorization> </system.web> </location> <location path="~/Authentication_JSON_AppService.axd"> <system.web> <authorization> <allow users="*"/> <allow users="?"/> </authorization> </system.web> </location> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" type="Microsoft.CSharp.CSharpCodeProvider,System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" warningLevel="4"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="WarnAsError" value="false"/> </compiler> <compiler language="vb;vbs;visualbasic;vbscript" extension=".vb" type="Microsoft.VisualBasic.VBCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" warningLevel="4"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="OptionInfer" value="true"/> <providerOption name="WarnAsError" value="false"/> </compiler> </compilers> </system.codedom> <!-- The system.webServer section is required for running ASP.NET AJAX under Internet Information Services 7.0. It is not necessary for previous version of IIS. --> <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <remove name="ScriptModule"/> <add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <remove name="ScriptHandlerFactory"/> <remove name="ScriptHandlerFactoryAppServices"/> <remove name="ScriptResource"/> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptResource" verb="GET,HEAD" path="ScriptResource.axd" preCondition="integratedMode" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </handlers> </system.webServer> <runtime> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"> <dependentAssembly> <assemblyIdentity name="System.Web.Extensions" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/> </dependentAssembly> <dependentAssembly> <assemblyIdentity name="System.Web.Extensions.Design" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/> </dependentAssembly> </assemblyBinding> </runtime> </configuration>

    Read the article

  • Team Foundation Server (TFS) Team Build Custom Activity C# Code for Assembly Stamping

    - by Bob Hardister
    For the full context and guidance on how to develop and implement a custom activity in Team Build see the Microsoft Visual Studio Rangers Team Foundation Build Customization Guide V.1 at http://vsarbuildguide.codeplex.com/ There are many ways to stamp or set the version number of your assemblies. This approach is based on the build number.   namespace CustomActivities { using System; using System.Activities; using System.IO; using System.Text.RegularExpressions; using Microsoft.TeamFoundation.Build.Client; [BuildActivity(HostEnvironmentOption.Agent)] public sealed class VersionAssemblies : CodeActivity { /// <summary> /// AssemblyInfoFileMask /// </summary> [RequiredArgument] public InArgument<string> AssemblyInfoFileMask { get; set; } /// <summary> /// SourcesDirectory /// </summary> [RequiredArgument] public InArgument<string> SourcesDirectory { get; set; } /// <summary> /// BuildNumber /// </summary> [RequiredArgument] public InArgument<string> BuildNumber { get; set; } /// <summary> /// BuildDirectory /// </summary> [RequiredArgument] public InArgument<string> BuildDirectory { get; set; } /// <summary> /// Publishes field values to the build report /// </summary> public OutArgument<string> DiagnosticTextOut { get; set; } // If your activity returns a value, derive from CodeActivity<TResult> and return the value from the Execute method. protected override void Execute(CodeActivityContext context) { // Obtain the runtime value of the input arguments string sourcesDirectory = context.GetValue(this.SourcesDirectory); string assemblyInfoFileMask = context.GetValue(this.AssemblyInfoFileMask); string buildNumber = context.GetValue(this.BuildNumber); string buildDirectory = context.GetValue(this.BuildDirectory); // ** Determine the version number values ** // Note: the format used here is: major.secondary.maintenance.build // ----------------------------------------------------------------- // Obtain the build definition name int nameStart = buildDirectory.LastIndexOf(@"\") + 1; string buildDefinitionName = buildDirectory.Substring(nameStart); // Set the primary.secondary.maintenance values // NOTE: these are hard coded in this example, but could be sourced from a file or parsed from a build definition name that includes them string p = "1"; string s = "5"; string m = "2"; // Initialize the build number string b; string na = "0"; // used for Assembly and Product Version instead of build number (see versioning best practices: **TBD reference) // Set qualifying product version information string productInfo = "RC2"; // Obtain the build increment number from the build number // NOTE: this code assumes the default build definition name format int buildIncrementNumberDelimterIndex = buildNumber.LastIndexOf("."); b = buildNumber.Substring(buildIncrementNumberDelimterIndex + 1); // Convert version to integer values int pVer = Convert.ToInt16(p); int sVer = Convert.ToInt16(s); int mVer = Convert.ToInt16(m); int bNum = Convert.ToInt16(b); int naNum = Convert.ToInt16(na); // ** Get all AssemblyInfo files and stamp them ** // Note: the mapping of AssemblyInfo.cs attributes to assembly display properties are as follows: // - AssemblyVersion = Assembly Version - used for the assembly version (does not change unless p, s or m values are changed) // - AssemblyFileVersion = File Version - used for the file version (changes with every build) // - AssemblyInformationalVersion = Product Version - used for the product version (can include additional version information) // ------------------------------------------------------------------------------------------------------------------------------------------------ Version assemblyVersion = new Version(pVer, sVer, mVer, naNum); Version newAssemblyFileVersion = new Version(pVer, sVer, mVer, bNum); Version productVersion = new Version(pVer, sVer, mVer); // Setup diagnostic fields int numberOfReplacements = 0; string addedAssemblyInformationalAttribute = "No"; // Enumerate over the assemblyInfo version attributes foreach (string attribute in new[] { "AssemblyVersion", "AssemblyFileVersion", "AssemblyInformationalVersion" }) { // Define the regular expression to find in each and every Assemblyinfo.cs files (which is for example 'AssemblyVersion("1.0.0.0")' ) Regex regex = new Regex(attribute + @"\(""\d+\.\d+\.\d+\.\d+""\)"); foreach (string file in Directory.EnumerateFiles(sourcesDirectory, assemblyInfoFileMask, SearchOption.AllDirectories)) { string text = File.ReadAllText(file); // Read the text from the AssemblyInfo file // If the AsemblyInformationalVersion attribute is not in the file, add it as the last line of the file // Note: by default the AssemblyInfo.cs files will not contain the AssemblyInformationalVersion attribute if (!text.Contains("[assembly: AssemblyInformationalVersion(\"")) { string lastLine = Environment.NewLine + "[assembly: AssemblyInformationalVersion(\"1.0.0.0\")]"; text = text + lastLine; addedAssemblyInformationalAttribute = "Yes"; } // Search for the expression Match match = regex.Match(text); if (match.Success) { // Get file attributes FileAttributes fileAttributes = File.GetAttributes(file); // Set file to read only File.SetAttributes(file, fileAttributes & ~FileAttributes.ReadOnly); // Insert AssemblyInformationalVersion attribute into the file text if does not already exist string newText = string.Empty; if (attribute == "AssemblyVersion") { newText = regex.Replace(text, attribute + "(\"" + assemblyVersion + "\")"); numberOfReplacements++; } if (attribute == "AssemblyFileVersion") { newText = regex.Replace(text, attribute + "(\"" + newAssemblyFileVersion + "\")"); numberOfReplacements++; } if (attribute == "AssemblyInformationalVersion") { newText = regex.Replace(text, attribute + "(\"" + productVersion + " " + productInfo + "\")"); numberOfReplacements++; } // Publish diagnostics to build report (diagnostic verbosity only) context.SetValue(this.DiagnosticTextOut, " Added AssemblyInformational Attribute: " + addedAssemblyInformationalAttribute + " Number of replacements: " + numberOfReplacements + " Build number: " + buildNumber + " Build directory: " + buildDirectory + " Build definition name: " + buildDefinitionName + " Assembly version: " + assemblyVersion + " New file version: " + newAssemblyFileVersion + " Product version: " + productVersion + " AssemblyInfo.cs Text Last Stamped: " + newText); // Write the new text in the AssemblyInfo file File.WriteAllText(file, newText); // restore the file's original attributes File.SetAttributes(file, fileAttributes); } } } } } }

    Read the article

  • Extended FindWindow

    - by João Angelo
    The Win32 API provides the FindWindow function that supports finding top-level windows by their class name and/or title. However, the title search does not work if you are trying to match partial text at the middle or the end of the full window title. You can however implement support for these extended search features by using another set of Win32 API like EnumWindows and GetWindowText. A possible implementation follows: using System; using System.Collections.Generic; using System.Linq; using System.Runtime.InteropServices; using System.Text; public class WindowInfo { private IntPtr handle; private string className; internal WindowInfo(IntPtr handle, string title) { if (handle == IntPtr.Zero) throw new ArgumentException("Invalid handle.", "handle"); this.Handle = handle; this.Title = title ?? string.Empty; } public string Title { get; private set; } public string ClassName { get { if (className == null) { className = GetWindowClassNameByHandle(this.Handle); } return className; } } public IntPtr Handle { get { if (!NativeMethods.IsWindow(this.handle)) throw new InvalidOperationException("The handle is no longer valid."); return this.handle; } private set { this.handle = value; } } public static WindowInfo[] EnumerateWindows() { var windows = new List<WindowInfo>(); NativeMethods.EnumWindowsProcessor processor = (hwnd, lParam) => { windows.Add(new WindowInfo(hwnd, GetWindowTextByHandle(hwnd))); return true; }; bool succeeded = NativeMethods.EnumWindows(processor, IntPtr.Zero); if (!succeeded) return new WindowInfo[] { }; return windows.ToArray(); } public static WindowInfo FindWindow(Predicate<WindowInfo> predicate) { WindowInfo target = null; NativeMethods.EnumWindowsProcessor processor = (hwnd, lParam) => { var current = new WindowInfo(hwnd, GetWindowTextByHandle(hwnd)); if (predicate(current)) { target = current; return false; } return true; }; NativeMethods.EnumWindows(processor, IntPtr.Zero); return target; } private static string GetWindowTextByHandle(IntPtr handle) { if (handle == IntPtr.Zero) throw new ArgumentException("Invalid handle.", "handle"); int length = NativeMethods.GetWindowTextLength(handle); if (length == 0) return string.Empty; var buffer = new StringBuilder(length + 1); NativeMethods.GetWindowText(handle, buffer, buffer.Capacity); return buffer.ToString(); } private static string GetWindowClassNameByHandle(IntPtr handle) { if (handle == IntPtr.Zero) throw new ArgumentException("Invalid handle.", "handle"); const int WindowClassNameMaxLength = 256; var buffer = new StringBuilder(WindowClassNameMaxLength); NativeMethods.GetClassName(handle, buffer, buffer.Capacity); return buffer.ToString(); } } internal class NativeMethods { public delegate bool EnumWindowsProcessor(IntPtr hwnd, IntPtr lParam); [DllImport("user32.dll")] [return: MarshalAs(UnmanagedType.Bool)] public static extern bool EnumWindows( EnumWindowsProcessor lpEnumFunc, IntPtr lParam); [DllImport("user32.dll", SetLastError = true, CharSet = CharSet.Auto)] public static extern int GetWindowText( IntPtr hWnd, StringBuilder lpString, int nMaxCount); [DllImport("user32.dll", SetLastError = true, CharSet = CharSet.Auto)] public static extern int GetWindowTextLength(IntPtr hWnd); [DllImport("user32.dll", SetLastError = true, CharSet = CharSet.Auto)] public static extern int GetClassName( IntPtr hWnd, StringBuilder lpClassName, int nMaxCount); [DllImport("user32.dll")] [return: MarshalAs(UnmanagedType.Bool)] public static extern bool IsWindow(IntPtr hWnd); } The access to the windows handle is preceded by a sanity check to assert if it’s still valid, but if you are dealing with windows out of your control then the window can be destroyed right after the check so it’s not guaranteed that you’ll get a valid handle. Finally, to wrap this up a usage, example: static void Main(string[] args) { var w = WindowInfo.FindWindow(wi => wi.Title.Contains("Test.docx")); if (w != null) { Console.Write(w.Title); } }

    Read the article

  • What to "CRM" in San Francisco? CRM Highlights for OpenWorld '12

    - by Tony Berk
    There is plenty to SEE for CRM during OpenWorld in San Francisco, September 30 - October 4! As I mentioned in my earlier post about some of the keynote sessions, Is There a Cloud Over OpenWorld?, I'm going try to highlight some key sessions to help you find the best sessions for you. Interested to find out where Oracle CRM products are headed, then find your "roadmap" session. Here are some of the sessions in the CRM Track that you might want to consider attending for products you currently own or might consider for the future. I think you'll agree, there is quite a bit of investment going on across Oracle CRM. Please use OpenWorld Schedule Builder or check the OpenWorld Content Catalog for all of the session details and any time or location changes. Tip: Pre-enrolled session registrants via Schedule Builder are allowed into the session rooms before anyone else, so Schedule Builder will guarantee you a seat. Many of the sessions below will likely be at capacity. General Session: Oracle Fusion CRM—Improving Sales Effectiveness, Efficiency, and Ease of Use (Session ID: GEN9674) - Oct 2, 11:45 AM - 12:45 PM. Anthony Lye, Senior VP, Oracle leads this general session focused on Oracle Fusion CRM. Oracle Fusion CRM optimizes territories, combines quota management and incentive compensation, integrates sales and marketing, and cleanses and enriches data—all within a single application platform. Oracle Fusion can be configured, changed, and extended at runtime by end users, business managers, IT, and developers. Oracle Fusion CRM can be used from the Web, from a smartphone, from Microsoft Outlook, or from an iPad. Deloitte, sponsor of the CRM Track, will also present key concepts on CRM implementations. Oracle Fusion Customer Relationship Management: Overview/Strategy/Customer Experiences/Roadmap (CON9407) - Oct 1, 3:15PM - 4:15PM. In this session, learn how Oracle Fusion CRM enables companies to create better sales plans, generate more quality leads, and achieve higher win rates and find out why customers are adopting Oracle Fusion CRM. Gain a deeper understanding of the unique capabilities only Oracle Fusion CRM provides, and learn how Oracle’s commitment to CRM innovation is driving a wide range of future enhancements. Oracle RightNow CX Cloud Service Vision and Roadmap (CON9764) - Oct 1, 10:45 AM - 11:45 AM. Oracle RightNow CX Cloud Service combines Web, social, and contact center experiences for a unified, cross-channel service solution in the cloud, enabling organizations to increase sales and adoption, build trust, strengthen relationships, and reduce costs and effort. Come to this session to hear from Oracle experts about where the product is going and how Oracle is committed to accelerating the pace of innovation and value to its customers. Siebel CRM Overview, Strategy, and Roadmap (CON9700) - Oct 1, 12:15PM - 1:15PM. The world’s most complete CRM solution, Oracle’s Siebel CRM helps organizations differentiate their businesses. Come to this session to learn about the Siebel product roadmap and how Oracle is committed to accelerating the pace of innovation and value for its customers on this platform. Additionally, the session covers how Siebel customers can leverage many Oracle assets such as Oracle WebCenter Sites; InQuira, RightNow, and ATG/Endeca applications, and Oracle Policy Automation in conjunction with their current Siebel investments. Oracle Fusion Social CRM Strategy and Roadmap: Future of Collaboration and Social Engagement (CON9750) - Oct 4, 11:15 AM - 12:15 PM. Social is changing the customer experience! Come find out how Oracle can help you know your customers better, encourage brand affinity, and improve collaboration within your ecosystem. This session reviews Oracle’s social media solution and shows how you can discover hidden insights buried in your enterprise and social data. Also learn how Oracle Social Network revolutionizes how enterprise users work, collaborate, and share to achieve successful outcomes. Oracle CRM On Demand Strategy and Roadmap (CON9727) - Oct 1, 10:45AM - 11:45AM. Oracle CRM On Demand is a powerful cloud-based customer relationship management solution. Come to this session to learn directly from Oracle experts about future product plans and hear how Oracle is committed to accelerating the pace of innovation and value to its customers. Knowledge Management Roadmap and Strategy (CON9776) - Oct 1, 12:15PM - 1:15PM. Learn how to harness the knowledge created as a natural byproduct of day-to-day interactions to lower costs and improve customer experience by delivering the right answer at the right time across channels. This session includes an overview of Oracle’s product roadmap and vision for knowledge management for both the Oracle RightNow and Oracle Knowledge (formerly InQuira) product families. Oracle Policy Automation Roadmap: Supercharging the Customer Experience (CON9655) - Oct 1, 12:15PM - 1:15PM. Oracle Policy Automation delivers rapid customer value by streamlining the capture, analysis, and deployment of policies across every facet of the customer experience. This session discusses recent Oracle Policy Automation enhancements for policy analytics; the latest Oracle Policy Automation Connector for Siebel; and planned new capabilities, including availability with the Oracle RightNow product line. There is much more, so stay tuned for more highlights or check out the Content Catalog and search for your areas of interest. Which session are you most interested in? Make your suggestions! But no voting for Pearl Jam or Kings of Leon. Those are after hours! 

    Read the article

  • C#/.NET Little Wonders: Getting Caller Information

    - by James Michael Hare
    Originally posted on: http://geekswithblogs.net/BlackRabbitCoder/archive/2013/07/25/c.net-little-wonders-getting-caller-information.aspx Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. There are times when it is desirable to know who called the method or property you are currently executing.  Some applications of this could include logging libraries, or possibly even something more advanced that may server up different objects depending on who called the method. In the past, we mostly relied on the System.Diagnostics namespace and its classes such as StackTrace and StackFrame to see who our caller was, but now in C# 5, we can also get much of this data at compile-time. Determining the caller using the stack One of the ways of doing this is to examine the call stack.  The classes that allow you to examine the call stack have been around for a long time and can give you a very deep view of the calling chain all the way back to the beginning for the thread that has called you. You can get caller information by either instantiating the StackTrace class (which will give you the complete stack trace, much like you see when an exception is generated), or by using StackFrame which gets a single frame of the stack trace.  Both involve examining the call stack, which is a non-trivial task, so care should be done not to do this in a performance-intensive situation. For our simple example let's say we are going to recreate the wheel and construct our own logging framework.  Perhaps we wish to create a simple method Log which will log the string-ified form of an object and some information about the caller.  We could easily do this as follows: 1: static void Log(object message) 2: { 3: // frame 1, true for source info 4: StackFrame frame = new StackFrame(1, true); 5: var method = frame.GetMethod(); 6: var fileName = frame.GetFileName(); 7: var lineNumber = frame.GetFileLineNumber(); 8: 9: // we'll just use a simple Console write for now 10: Console.WriteLine("{0}({1}):{2} - {3}", 11: fileName, lineNumber, method.Name, message); 12: } So, what we are doing here is grabbing the 2nd stack frame (the 1st is our current method) using a 2nd argument of true to specify we want source information (if available) and then taking the information from the frame.  This works fine, and if we tested it out by calling from a file such as this: 1: // File c:\projects\test\CallerInfo\CallerInfo.cs 2:  3: public class CallerInfo 4: { 5: Log("Hello Logger!"); 6: } We'd see this: 1: c:\projects\test\CallerInfo\CallerInfo.cs(5):Main - Hello Logger! This works well, and in fact CallStack and StackFrame are still the best ways to examine deeper into the call stack.  But if you only want to get information on the caller of your method, there is another option… Determining the caller at compile-time In C# 5 (.NET 4.5) they added some attributes that can be supplied to optional parameters on a method to receive caller information.  These attributes can only be applied to methods with optional parameters with explicit defaults.  Then, as the compiler determines who is calling your method with these attributes, it will fill in the values at compile-time. These are the currently supported attributes available in the  System.Runtime.CompilerServices namespace": CallerFilePathAttribute – The path and name of the file that is calling your method. CallerLineNumberAttribute – The line number in the file where your method is being called. CallerMemberName – The member that is calling your method. So let’s take a look at how our Log method would look using these attributes instead: 1: static int Log(object message, 2: [CallerMemberName] string memberName = "", 3: [CallerFilePath] string fileName = "", 4: [CallerLineNumber] int lineNumber = 0) 5: { 6: // we'll just use a simple Console write for now 7: Console.WriteLine("{0}({1}):{2} - {3}", 8: fileName, lineNumber, memberName, message); 9: } Again, calling this from our sample Main would give us the same result: 1: c:\projects\test\CallerInfo\CallerInfo.cs(5):Main - Hello Logger! However, though this seems the same, there are a few key differences. First of all, there are only 3 supported attributes (at this time) that give you the file path, line number, and calling member.  Thus, it does not give you as rich of detail as a StackFrame (which can give you the calling type as well and deeper frames, for example).  Also, these are supported through optional parameters, which means we could call our new Log method like this: 1: // They're defaults, why not fill 'em in 2: Log("My message.", "Some member", "Some file", -13); In addition, since these attributes require optional parameters, they cannot be used in properties, only in methods. These caveats aside, they do let you get similar information inside of methods at a much greater speed!  How much greater?  Well lets crank through 1,000,000 iterations of each.  instead of logging to console, I’ll return the formatted string length of each.  Doing this, we get: 1: Time for 1,000,000 iterations with StackTrace: 5096 ms 2: Time for 1,000,000 iterations with Attributes: 196 ms So you see, using the attributes is much, much faster!  Nearly 25x faster in fact.  Summary There are a few ways to get caller information for a method.  The StackFrame allows you to get a comprehensive set of information spanning the whole call stack, but at a heavier cost.  On the other hand, the attributes allow you to quickly get at caller information baked in at compile-time, but to do so you need to create optional parameters in your methods to support it. Technorati Tags: Little Wonders,CSharp,C#,.NET,StackFrame,CallStack,CallerFilePathAttribute,CallerLineNumberAttribute,CallerMemberName

    Read the article

  • Best Practices Generating WebService Proxies for Oracle Sales Cloud (Fusion CRM)

    - by asantaga
    I've recently been building a REST Service wrapper for Oracle Sales Cloud and initially all was going well, however as soon as I added all of my Web Service proxies I started to get weird errors..  My project structure looks like this What I found out was if I only had the InteractionsService & OpportunityService WebService Proxies then all worked ok, but as soon as I added the LocationsService Proxy, I would start to see strange JAXB errors. Example of the error message Exception in thread "main" javax.xml.ws.WebServiceException: Unable to create JAXBContextat com.sun.xml.ws.model.AbstractSEIModelImpl.createJAXBContext(AbstractSEIModelImpl.java:164)at com.sun.xml.ws.model.AbstractSEIModelImpl.postProcess(AbstractSEIModelImpl.java:94)at com.sun.xml.ws.model.RuntimeModeler.buildRuntimeModel(RuntimeModeler.java:281)at com.sun.xml.ws.client.WSServiceDelegate.buildRuntimeModel(WSServiceDelegate.java:762)at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.buildRuntimeModel(WLSProvider.java:982)at com.sun.xml.ws.client.WSServiceDelegate.createSEIPortInfo(WSServiceDelegate.java:746)at com.sun.xml.ws.client.WSServiceDelegate.addSEI(WSServiceDelegate.java:737)at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:361)at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate.internalGetPort(WLSProvider.java:934)at weblogic.wsee.jaxws.spi.WLSProvider$ServiceDelegate$PortClientInstanceFactory.createClientInstance(WLSProvider.java:1039)...... Looking further down I see the error message is related to JAXB not being able to find an objectFactory for one of its types Caused by: java.security.PrivilegedActionException: com.sun.xml.bind.v2.runtime.IllegalAnnotationsException: 6 counts of IllegalAnnotationExceptionsThere's no ObjectFactory with an @XmlElementDecl for the element {http://xmlns.oracle.com/apps/crmCommon/activities/activitiesService/}AssigneeRsrcOrgIdthis problem is related to the following location:at protected javax.xml.bind.JAXBElement com.oracle.xmlns.apps.crmcommon.activities.activitiesservice.ActivityAssignee.assigneeRsrcOrgId at com.oracle.xmlns.apps.crmcommon.activities.activitiesservice.ActivityAssignee This is very strange... My first thoughts are that when I generated the WebService Proxy I entered the package name as "oracle.demo.pts.fusionproxy.servicename" and left the generated types as blank. This way all the generated types get put into the same package hierarchy and when deployed they get merged... Sounds resaonable and appears to work but not in this case..  To resolve this I regenerate the proxy but this time setting : Package name : To the name of my package eg. oracle.demo.pts.fusionproxy.interactionsRoot Package for Generated Types :  Package where the types will be generated to, e.g. oracle.demo.pts.fusionproxy.SalesParty.types When I ran the application now, it all works , awesome eh???? Alas no, there is a serious side effect. The problem now is that to help coding I've created a collection of helper classes , these helper classes take parameters which use some of the "generic" datatypes, like FindCriteria. e.g. This wont work any more public static FindCriteria createCustomFindCriteria(FindCriteria pFc,String pAttributes) Here lies a gremlin of a problem.. I cant use this method anymore, this is because the FindCriteria datatype is now being defined two, or more times, in the generated code for my project. If you leave the Root Package for types blank it will get generated to com.oracle.xmlns, and if you populate it then it gets generated to your custom package.. The two datatypes look the same, sound the same (and if this were a duck would sound the same), but THEY ARE NOT THE SAME... Speaking to development, they recommend you should not be entering anything in the Root Packages section, so the mystery thickens why does it work.. Well after spending sometime with some colleagues of mine in development we've identified the issue.. Alas different parts of Oracle Fusion Development have multiple schemas with the same namespace, when the WebService generator generates its classes its not seeing the other schemas properly and not generating the Object Factories correctly...  Thankfully I've found a workaround Solution Overview When generating the proxies leave the Root Package for Generated Types BLANK When you have finished generating your proxies, use the JAXB tool XJC and generate Java classes for all datatypes  Create a project within your JDeveloper11g workspace and import the java classes into this project Final bit.. within the project dependencies ensure that the JAXB/XJC generated classes are "FIRST" in the classpath Solution Details Generate the WebServices SOAP proxies When generating the proxies your generation dialog should look like this Ensure the "unwrap" parameters is selected, if it isn't then that's ok, it simply means when issuing a "get" you need to extract out the Element Generate the JAXB Classes using XJC XJC provides a command line switch called -wsdl, this (although is experimental/beta) , accepts a HTTP WSDL and will generate the relevant classes. You can put these into a single batch/shell script xjc -wsdl https://fusionservername:443/appCmmnCompInteractions/InteractionService?wsdlxjc -wsdl https://fusionservername443/opptyMgmtOpportunities/OpportunityService?wsdl Create Project in JDeveloper to store the XJC "generated" JAXB classes Within the project folder create a filesystem folder called "src" and copy the generated files into this folder. JDeveloper11g should then see the classes and display them, if it doesnt try clicking the "refresh" button In your main project ensure that the JDeveloper XJC project is selected as a dependancy and IMPORTANT make sure it is at the top of the list. This ensures that the classes are at the front of the classpath And voilà.. Hopefully you wont see any JAXB generation errors and you can use common datatypes interchangeably in your project, (e.g. FindCriteria etc)

    Read the article

  • Understanding the 'High Performance' meaning in Extreme Transaction Processing

    - by kyap
    Despite my previous blogs entries on SOA/BPM and Identity Management, the domain where I'm the most passionated is definitely the Extreme Transaction Processing, commonly called XTP.I came across XTP back to 2007 while I was still FMW Product Manager in EMEA. At that time Oracle acquired a company called Tangosol, which owned an unique product called Coherence that we renamed to Oracle Coherence. Beside this innovative renaming of the product, to be honest, I didn't know much about it, except being a "distributed in-memory cache for Extreme Transaction Processing"... not very helpful still.In general when people doesn't fully understand a technology or a concept, they tend to find some shortcuts, either correct or not, to justify their lack-of understanding... and of course I was part of this category of individuals. And the shortcut was "Oracle Coherence Cache helps to improve Performance". Excellent marketing slogan... but not very meaningful still. By chance I was able to get away quickly from that group in July 2007* at Thames Valley Park (UK), after I attended one of the most interesting workshops, in my 10 years career in Oracle, delivered by Brian Oliver. The biggest mistake I made was to assume that performance improvement with Coherence was related to the response time. Which can be considered as legitimus at that time, because after-all caches help to reduce latency on cached data access, hence reduce the response-time. But like all caches, you need to define caching and expiration policies, thinking about the cache-missed strategy, and most of the time you have to re-write partially your application in order to work with the cache. At a result, the expected benefit vanishes... so, not very useful then?The key mistake I made was my perception or obsession on how performance improvement should be driven, but I strongly believe this is still a common problem to most of the developers. In fact we all know the that the performance of a system is generally presented by the Capacity (or Throughput), with the 2 important dimensions Speed (response-time) and Volume (load) :Capacity (TPS) = Volume (T) / Speed (S)To increase the Capacity, we can either reduce the Speed(in terms of response-time), or to increase the Volume. However we tend to only focus on reducing the Speed dimension, perhaps it is more concrete and tangible to measure, and nicer to present to our management because there's a direct impact onto the end-users experience. On the other hand, we assume the Volume can be addressed by the underlying hardware or software stack, so if we need more capacity (scale out), we just add more hardware or software. Unfortunately, the reality proves that IT is never as ideal as we assume...The challenge with Speed improvement approach is that it is generally difficult and costly to make things already fast... faster. And by adding Coherence will not necessarily help either. Even though we manage to do so, the Capacity can not increase forever because... the Speed can be influenced by the Volume. For all system, we always have a performance illustration as follow: In all traditional system, the increase of Volume (Transaction) will also increase the Speed (Response-Time) as some point. The reason is simple: most of the time the Application logics were not designed to scale. As an example, if you have a while-loop in your application, it is natural to conceive that parsing 200 entries will require double execution-time compared to 100 entries. If you need to "Speed-up" the execution, you can only upgrade your hardware (scale-up) with faster CPU and/or network to reduce network latency. It is technically limited and economically inefficient. And this is exactly where XTP and Coherence kick in. The primary objective of XTP is about designing applications which can scale-out for increasing the Volume, by applying coding techniques to keep the execution-time as constant as possible, independently of the number of runtime data being manipulated. It is actually not just about having an application running as fast as possible, but about having a much more predictable system, with constant response-time and linearly scale, so we can easily increase throughput by adding more hardwares in parallel. It is in general combined with the Low Latency Programming model, where we tried to optimize the network usage as much as possible, either from the programmatic angle (less network-hoops to complete a task), and/or from a hardware angle (faster network equipments). In this picture, Oracle Coherence can be considered as software-level XTP enabler, via the Distributed-Cache because it can guarantee: - Constant Data Objects access time, independently from the number of Objects and the Coherence Cluster size - Data Objects Distribution by Affinity for in-memory data grouping - In-place Data Processing for parallel executionTo summarize, Oracle Coherence is indeed useful to improve your application performance, just not in the way we commonly think. It's not about the Speed itself, but about the overall Capacity with Extreme Load while keeping consistant Speed. In the future I will keep adding new blog entries around this topic, with some sample codes experiences sharing that I capture in the last few years. In the meanwhile if you want to know more how Oracle Coherence, I strongly suggest you to start with checking how our worldwide customers are using Oracle Coherence first, then you can start playing with the product through our tutorial.Have Fun !

    Read the article

  • ADF Reusable Artefacts

    - by Arda Eralp
    Primary reusable ADF Business Component: Entity Objects (EOs) View Objects (VOs) Application Modules (AMs) Framework Extensions Classes Primary reusable ADF Controller: Bounded Task Flows (BTFs) Task Flow Templates Primary reusable ADF Faces: Page Templates Skins Declarative Components Utility Classes Certain components will often be used more than once. Whether the reuse happens within the same application, or across different applications, it is often advantageous to package these reusable components into a library that can be shared between different developers, across different teams, and even across departments within an organization. In the world of Java object-oriented programming, reusing classes and objects is just standard procedure. With the introduction of the model-view-controller (MVC) architecture, applications can be further modularized into separate model, view, and controller layers. By separating the data (model and business services layers) from the presentation (view and controller layers), you ensure that changes to any one layer do not affect the integrity of the other layers. You can change business logic without having to change the UI, or redesign the web pages or front end without having to recode domain logic. Oracle ADF and JDeveloper support the MVC design pattern. When you create an application in JDeveloper, you can choose many application templates that automatically set up data model and user interface projects. Because the different MVC layers are decoupled from each other, development can proceed on different projects in parallel and with a certain amount of independence. ADF Library further extends this modularity of design by providing a convenient and practical way to create, deploy, and reuse high-level components. When you first design your application, you design it with component reusability in mind. If you created components that can be reused, you can package them into JAR files and add them to a reusable component repository. If you need a component, you may look into the repository for those components and then add them into your project or application. For example, you can create an application module for a domain and package it to be used as the data model project in several different applications. Or, if your application will be consuming components, you may be able to load a page template component from a repository of ADF Library JARs to create common look and feel pages. Then you can put your page flow together by stringing together several task flow components pulled from the library. An ADF Library JAR contains ADF components and does not, and cannot, contain other JARs. It should not be confused with the JDeveloper library, Java EE library, or Oracle WebLogic shared library. Reusable Component Description Data Control Any data control can be packaged into an ADF Library JAR. Some of the data controls supported by Oracle ADF include application modules, Enterprise JavaBeans, web services, URL services, JavaBeans, and placeholder data controls. Application Module When you are using ADF Business Components and you generate an application module, an associated application module data control is also generated. When you package an application module data control, you also package up the ADF Business Components associated with that application module. The relevant entity objects, view objects, and associations will be a part of the ADF Library JAR and available for reuse. Business Components Business components are the entity objects, view objects, and associations used in the ADF Business Components data model project. You can package business components by themselves or together with an application module. Task Flows & Task Flow Templates Task flows can be packaged into an ADF Library JAR for reuse. If you drop a bounded task flow that uses page fragments, JDeveloper adds a region to the page and binds it to the dropped task flow. ADF bounded task flows built using pages can be dropped onto pages. The drop will create a link to call the bounded task flow. A task flow call activity and control flow will automatically be added to the task flow, with the view activity referencing the page. If there is more than one existing task flow with a view activity referencing the page, it will prompt you to select the one to automatically add a task flow call activity and control flow. If an ADF task flow template was created in the same project as the task flow, the ADF task flow template will be included in the ADF Library JAR and will be reusable. Page Templates You can package a page template and its artifacts into an ADF Library JAR. If the template uses image files and they are included in a directory within your project, these files will also be available for the template during reuse. Declarative Components You can create declarative components and package them for reuse. The tag libraries associated with the component will be included and loaded into the consuming project. You can also package up projects that have several different reusable components if you expect that more than one component will be consumed. For example, you can create a project that has both an application module and a bounded task flow. When this ADF Library JAR file is consumed, the application will have both the application module and the task flow available for use. You can package multiple components into one JAR file, or you can package a single component into a JAR file. Oracle ADF and JDeveloper give you the option and flexibility to create reusable components that best suit you and your organization. You create a reusable component by using JDeveloper to package and deploy the project that contains the components into a ADF Library JAR file. You use the components by adding that JAR to the consuming project. At design time, the JAR is added to the consuming project's class path and so is available for reuse. At runtime, the reused component runs from the JAR file by reference.

    Read the article

  • How to break out of if statement

    - by TheBroodian
    I'm not sure if the title is exactly an accurate representation of what I'm actually trying to ask, but that was the best I could think of. I am experiencing an issue with my character class. I have developed a system so that he can perform chain attacks, and something that was important to me was that 1)button presses during the process of an attack wouldn't interrupt the character, and 2) at the same time, button presses should be stored so that the player can smoothly queue up chain attacks in the middle of one so that gameplay doesn't feel rigid or unresponsive. This all begins when the player presses the punch button. Upon pressing the punch button, the game checks the state of the dpad at the moment of the button press, and then translates the resulting combined buttons into an int which I use as an enumerator relating to a punch method for the character. The enumerator is placed into a List so that the next time the character's Update() method is called, it will execute the next punch in the list. It only executes the next punch if my character is flagged with acceptInput as true. All attacks flag acceptInput as false, to prevent the interruption of attacks, and then at the end of an attack, acceptInput is set back to true. While accepting input, all other actions are polled for, i.e. jumping, running, etc. In runtime, if I attack, and then queue up another attack behind it (by pressing forward+punch) I can see the second attack visibly execute, which should flag acceptInput as false, yet it gets interrupted and my character will stop punching and start running if I am still holding down the dpad. Included is some code for context. This is the input region for my character. //Placed this outside the if (acceptInput) tree because I want it //to be taken into account whether we are accepting input or not. //This will queue up attacks, which will only be executed if we are accepting input. //This creates a desired effect that helps control the character in a // smoother fashion for the player. if (Input.justPressed(buttonManager.Punch)) { int dpadPressed = Input.DpadState(0); if (attackBuffer.Count() < 1) { attackBuffer.Add(CheckPunch(dpadPressed)); } else { attackBuffer.Clear(); attackBuffer.Add(CheckPunch(dpadPressed)); } } if (acceptInput) { if (attackBuffer.Count() > 0) { ExecutePunch(attackBuffer[0]); attackBuffer.RemoveAt(0); } //If D-Pad left is being held down. if (Input.DpadDirectionHeld(0, buttonManager.Left)) { flipped = false; if (onGround) { newAnimation = "run"; } velocity = new Vector2(velocity.X - acceleration, velocity.Y); if (walking == true && velocity.X <= -walkSpeed) { velocity.X = -walkSpeed; } else if (walking == false && velocity.X <= -maxSpeed) { velocity.X = -maxSpeed; } } //If D-Pad right is being held down. if (Input.DpadDirectionHeld(0, buttonManager.Right)) { flipped = true; if (onGround) { newAnimation = "run"; } velocity = new Vector2(velocity.X + acceleration, velocity.Y); if (walking == true && velocity.X >= walkSpeed) { velocity.X = walkSpeed; } else if (walking == false && velocity.X >= maxSpeed) { velocity.X = maxSpeed; } } //If jump/accept button is pressed. if (Input.justPressed(buttonManager.JumpAccept)) { if (onGround) { Jump(); } } //If toggle element next button is pressed. if (Input.justPressed(buttonManager.ToggleElementNext)) { if (elements.Count != 0) { elementInUse++; if (elementInUse >= elements.Count) { elementInUse = 0; } } } //If toggle element last button is pressed. if (Input.justPressed(buttonManager.ToggleElementLast)) { if (elements.Count != 0) { elementInUse--; if (elementInUse < 0) { elementInUse = Convert.ToSByte(elements.Count() - 1); } } } //If character is in the process of jumping. if (jumping == true) { if (Input.heldDown(buttonManager.JumpAccept)) { velocity.Y -= fallSpeed.Y; maxJumpTime -= elapsed; } if (Input.justReleased(buttonManager.JumpAccept) || maxJumpTime <= 0) { jumping = false; maxJumpTime = 0; } } //Won't execute abilities if input isn't being accepted. foreach (PlayerAbility ability in playerAbilities) { if (buffer.Matches(ability)) { if (onGround) { ability.Activate(); } if (!onGround && ability.UsableInAir) { ability.Activate(); } else if (!onGround && !ability.UsableInAir) { buffer.Clear(); } } } } When the attackBuffer calls ExecutePunch(int) method, ExecutePunch() will call one of the following methods: private void NeutralPunch1() //0 { acceptInput = false; busy = true; newAnimation = "punch1"; numberOfAttacks++; timeSinceLastAttack = 0; } private void ForwardPunch2(bool toLeft) //true == 7, false == 4 { forwardPunch2Timer = 0f; acceptInput = false; busy = true; newAnimation = "punch2begin"; numberOfAttacks++; timeSinceLastAttack = 0; if (toLeft) { velocity.X -= 800; } if (!toLeft) { velocity.X += 800; } } I assume the attack is being interrupted due to the fact that ExecutePunch() is in the same if statement as running, but I haven't been able to find a suitable way to stop this happening. Thank you ahead of time for reading this, I apologize for it having become so long winded.

    Read the article

  • ADF Business Components

    - by Arda Eralp
    ADF Business Components and JDeveloper simplify the development, delivery, and customization of business applications for the Java EE platform. With ADF Business Components, developers aren't required to write the application infrastructure code required by the typical Java EE application to: Connect to the database Retrieve data Lock database records Manage transactions   ADF Business Components addresses these tasks through its library of reusable software components and through the supporting design time facilities in JDeveloper. Most importantly, developers save time using ADF Business Components since the JDeveloper design time makes typical development tasks entirely declarative. In particular, JDeveloper supports declarative development with ADF Business Components to: Author and test business logic in components which automatically integrate with databases Reuse business logic through multiple SQL-based views of data, supporting different application tasks Access and update the views from browser, desktop, mobile, and web service clients Customize application functionality in layers without requiring modification of the delivered application The goal of ADF Business Components is to make the business services developer more productive.   ADF Business Components provides a foundation of Java classes that allow your business-tier application components to leverage the functionality provided in the following areas: Simplifying Data Access Design a data model for client displays, including only necessary data Include master-detail hierarchies of any complexity as part of the data model Implement end-user Query-by-Example data filtering without code Automatically coordinate data model changes with business services layer Automatically validate and save any changes to the database   Enforcing Business Domain Validation and Business Logic Declaratively enforce required fields, primary key uniqueness, data precision-scale, and foreign key references Easily capture and enforce both simple and complex business rules, programmatically or declaratively, with multilevel validation support Navigate relationships between business domain objects and enforce constraints related to compound components   Supporting Sophisticated UIs with Multipage Units of Work Automatically reflect changes made by business service application logic in the user interface Retrieve reference information from related tables, and automatically maintain the information when the user changes foreign-key values Simplify multistep web-based business transactions with automatic web-tier state management Handle images, video, sound, and documents without having to use code Synchronize pending data changes across multiple views of data Consistently apply prompts, tooltips, format masks, and error messages in any application Define custom metadata for any business components to support metadata-driven user interface or application functionality Add dynamic attributes at runtime to simplify per-row state management   Implementing High-Performance Service-Oriented Architecture Support highly functional web service interfaces for business integration without writing code Enforce best-practice interface-based programming style Simplify application security with automatic JAAS integration and audit maintenance "Write once, run anywhere": use the same business service as plain Java class, EJB session bean, or web service   Streamlining Application Customization Extend component functionality after delivery without modifying source code Globally substitute delivered components with extended ones without modifying the application   ADF Business Components implements the business service through the following set of cooperating components: Entity object An entity object represents a row in a database table and simplifies modifying its data by handling all data manipulation language (DML) operations for you. These are basically your 1 to 1 representation of a database table. Each table in the database will have 1 and only 1 EO. The EO contains the mapping between columns and attributes. EO's also contain the business logic and validation. These are you core data services. They are responsible for updating, inserting and deleting records. The Attributes tab displays the actual mapping between attributes and columns, the mapping has following fields: Name : contains the name of the attribute we expose in our data model. Type : defines the data type of the attribute in our application. Column : specifies the column to which we want to map the attribute with Column Type : contains the type of the column in the database   View object A view object represents a SQL query. You use the full power of the familiar SQL language to join, filter, sort, and aggregate data into exactly the shape required by the end-user task. The attributes in the View Objects are actually coming from the Entity Object. In the end the VO will generate a query but you basically build a VO by selecting which EO need to participate in the VO and which attributes of those EO you want to use. That's why you have the Entity Usage column so you can see the relation between VO and EO. In the query tab you can clearly see the query that will be generated for the VO. At this stage we don't need it and just use it for information purpose. In later stages we might use it. Application module An application module is the controller of your data layer. It is responsible for keeping hold of the transaction. It exposes the data model to the view layer. You expose the VO's through the Application Module. This is the abstraction of your data layer which you want to show to the outside word.It defines an updatable data model and top-level procedures and functions (called service methods) related to a logical unit of work related to an end-user task. While the base components handle all the common cases through built-in behavior, customization is always possible and the default behavior provided by the base components can be easily overridden or augmented. When you create EO's, a foreign key will be translated into an association in our model. It defines the type of relation and who is the master and child as well as how the visibility of the association looks like. A similar concept exists to identify relations between view objects. These are called view links. These are almost identical as association except that a view link is based upon attributes defined in the view object. It can also be based upon an association. Here's a short summary: Entity Objects: representations of tables Association: Relations between EO's. Representations of foreign keys View Objects: Logical model View Links: Relationships between view objects Application Model: interface to your application  

    Read the article

  • Shallow Copy vs DeepCopy in C#.NET

    Hope below example helps to understand the difference. Please drop a comment if any doubts. using System; using System.IO; using System.Runtime.Serialization.Formatters.Binary; namespace ShallowCopyVsDeepCopy {     class Program     {         static void Main(string[] args)         {             var e1 = new Emp { EmpNo = 10, EmpName = "Smith", Department = new Dep { DeptNo = 100, DeptName = "Finance" } };             var e2 = e1.ShallowClone();             e1.Department.DeptName = "Accounts";             Console.WriteLine(e2.Department.DeptName);             var e3 = new Emp { EmpNo = 10, EmpName = "Smith", Department = new Dep { DeptNo = 100, DeptName = "Finance" } };             var e4 = e3.DeepClone();             e3.Department.DeptName = "Accounts";             Console.WriteLine(e4.Department.DeptName);         }     }     [Serializable]     class Dep     {         public int DeptNo { get; set; }         public String DeptName { get; set; }     }     [Serializable]     class Emp     {         public int EmpNo { get; set; }         public String EmpName { get; set; }         public Dep Department { get; set; }         public Emp ShallowClone()         {             return (Emp)this.MemberwiseClone();         }         public Emp DeepClone()         {             MemoryStream ms = new MemoryStream();             BinaryFormatter bf = new BinaryFormatter();             bf.Serialize(ms, this);             ms.Seek(0, SeekOrigin.Begin);             object copy = bf.Deserialize(ms);             ms.Close();             return copy as Emp;         }     } } span.fullpost {display:none;}

    Read the article

  • What to "CRM" in San Francisco? CRM Highlights for OpenWorld '12

    - by Richard Lefebvre
    There is plenty to SEE for CRM during OpenWorld in San Francisco, September 30 - October 4! Here are some of the sessions in the CRM Track that you might want to consider attending for products you currently own or might consider for the future. I think you'll agree, there is quite a bit of investment going on across Oracle CRM. Please use OpenWorld Schedule Builder or check the OpenWorld Content Catalog for all of the session details and any time or location changes. Tip: Pre-enrolled session registrants via Schedule Builder are allowed into the session rooms before anyone else, so Schedule Builder will guarantee you a seat. Many of the sessions below will likely be at capacity. General Session: Oracle Fusion CRM—Improving Sales Effectiveness, Efficiency, and Ease of Use (Session ID: GEN9674) - Oct 2, 11:45 AM - 12:45 PM. Anthony Lye, Senior VP, Oracle leads this general session focused on Oracle Fusion CRM. Oracle Fusion CRM optimizes territories, combines quota management and incentive compensation, integrates sales and marketing, and cleanses and enriches data—all within a single application platform. Oracle Fusion can be configured, changed, and extended at runtime by end users, business managers, IT, and developers. Oracle Fusion CRM can be used from the Web, from a smartphone, from Microsoft Outlook, or from an iPad. Deloitte, sponsor of the CRM Track, will also present key concepts on CRM implementations. Oracle Fusion Customer Relationship Management: Overview/Strategy/Customer Experiences/Roadmap (CON9407) - Oct 1, 3:15PM - 4:15PM. In this session, learn how Oracle Fusion CRM enables companies to create better sales plans, generate more quality leads, and achieve higher win rates and find out why customers are adopting Oracle Fusion CRM. Gain a deeper understanding of the unique capabilities only Oracle Fusion CRM provides, and learn how Oracle’s commitment to CRM innovation is driving a wide range of future enhancements. Oracle RightNow CX Cloud Service Vision and Roadmap (CON9764) - Oct 1, 10:45 AM - 11:45 AM. Oracle RightNow CX Cloud Service combines Web, social, and contact center experiences for a unified, cross-channel service solution in the cloud, enabling organizations to increase sales and adoption, build trust, strengthen relationships, and reduce costs and effort. Come to this session to hear from Oracle experts about where the product is going and how Oracle is committed to accelerating the pace of innovation and value to its customers. Siebel CRM Overview, Strategy, and Roadmap (CON9700) - Oct 1, 12:15PM - 1:15PM. The world’s most complete CRM solution, Oracle’s Siebel CRM helps organizations differentiate their businesses. Come to this session to learn about the Siebel product roadmap and how Oracle is committed to accelerating the pace of innovation and value for its customers on this platform. Additionally, the session covers how Siebel customers can leverage many Oracle assets such as Oracle WebCenter Sites; InQuira, RightNow, and ATG/Endeca applications, and Oracle Policy Automation in conjunction with their current Siebel investments. Oracle Fusion Social CRM Strategy and Roadmap: Future of Collaboration and Social Engagement (CON9750) - Oct 4, 11:15 AM - 12:15 PM. Social is changing the customer experience! Come find out how Oracle can help you know your customers better, encourage brand affinity, and improve collaboration within your ecosystem. This session reviews Oracle’s social media solution and shows how you can discover hidden insights buried in your enterprise and social data. Also learn how Oracle Social Network revolutionizes how enterprise users work, collaborate, and share to achieve successful outcomes. Oracle CRM On Demand Strategy and Roadmap (CON9727) - Oct 1, 10:45AM - 11:45AM. Oracle CRM On Demand is a powerful cloud-based customer relationship management solution. Come to this session to learn directly from Oracle experts about future product plans and hear how Oracle is committed to accelerating the pace of innovation and value to its customers. Knowledge Management Roadmap and Strategy (CON9776) - Oct 1, 12:15PM - 1:15PM. Learn how to harness the knowledge created as a natural byproduct of day-to-day interactions to lower costs and improve customer experience by delivering the right answer at the right time across channels. This session includes an overview of Oracle’s product roadmap and vision for knowledge management for both the Oracle RightNow and Oracle Knowledge (formerly InQuira) product families. Oracle Policy Automation Roadmap: Supercharging the Customer Experience (CON9655) - Oct 1, 12:15PM - 1:15PM. Oracle Policy Automation delivers rapid customer value by streamlining the capture, analysis, and deployment of policies across every facet of the customer experience. This session discusses recent Oracle Policy Automation enhancements for policy analytics; the latest Oracle Policy Automation Connector for Siebel; and planned new capabilities, including availability with the Oracle RightNow product line. There is much more, so stay tuned for more highlights or check out the Content Catalog and search for your areas of interest. 

    Read the article

  • Tip #19 Module Private Visibility in OSGi

    - by ByronNevins
    I hate public and protected methods and classes.  It requires so much work to change them in a huge project like GlassFish.  Not to mention that you may well have to support those APIs forever.  They are highly overused in GlassFish.  In fact I'd bet that > 95% of classes are marked as public for no good reason.  It's just (bad) habit is my guess. private and default visibility (I call it package-private) is easier to maintain.  It is much much easier to change such classes and methods around.  If you have ANY public method or public class in GlassFish you'll need to grep through a tremendous amount of source code to find all callers.  But even that won't be theoretically reliable.  What if a caller is using reflection to access public methods?  You may never find such usages. If you have package private methods, it's easy.  Simply grep through all the code in that one package.  As long as that package compiles ok you're all set.  There can' be any compile errors anywhere else.  It's a waste of time to even look around or build the "outside" world.  So you may be thinking: "Aha!  I'll just make my module have one giant package with all the java files.  Then I can use the default visibility and maintenance will be much easier.  But there's a problem.  You are wasting a very nice feature of java -- organizing code into separate packages.  It also makes the code much more encapsulated.  Unfortunately to share code between the packages you have no choice but to declare public visibility. What happens in practice is that a module ends up having tons of public classes and methods that are used exclusively inside the module.  Which finally brings me to the point of this blog:  If Only There Was A Module-Private Visibility Available Well, surprise!  There is such a mechanism.  If your project is running under OSGi that is.  Like GlassFish does!  With this mechanism you can easily add another level of visibility by telling OSGi exactly which public you want to be exposed outside of the module.  You get the best of both worlds: Better encapsulation of your code so that maintenance is easier and productivity is increased. Usage of public visibility inside the module so that you can encapsulate intra-module better with packages. How I do this in GlassFish: Carefully plan out at least one package that will contain "true" publics.  This is the package that will be exported by OSGi.  I recommend just one package. Here is how to tell OSGi to use it in GlassFish -- edit osgi.bundle like so:-exportcontents:     org.glassfish.mymodule.truepublics;  version=${project.osgi.version} Now all publics declared in any other packages will be visible module-wide but not outside the module. There is one caveat: Accessing "module-private" items outside of the module is controlled at run-time, not compile-time.  The compiler has no clue that a public in a dependent module isn't really public.  it will happily compile it.  At runtime you will definitely see fireworks.  The good news is that you don't have to wait for the code path that tries to use the "module-private" items to fire.  OSGi will complain loudly when that module gets loaded.  OSGi will refuse to load it.  You will see an error like this: remote failure: Error while loading FOO: Exception while adding the new configuration : Error occurred during deployment: Exception while loading the app : org.osgi.framework.BundleException: Unresolved constraint in bundle com.oracle.glassfish.miscreant.code [115]: Unable to resolve 115.0: missing requirement [115.0] osgi.wiring.package; (osgi.wiring.package=org.glassfish.mymodule.unexported). Please see server.log for more details. That is if you accidentally change code in module B to use a public that is really a "module-private" in module A, then you will see the error immediately when you try to test whatever you were changing in module B.

    Read the article

  • Using Subjects to Deploy Queries Dynamically

    - by Roman Schindlauer
    In the previous blog posting, we showed how to construct and deploy query fragments to a StreamInsight server, and how to re-use them later. In today’s posting we’ll integrate this pattern into a method of dynamically composing a new query with an existing one. The construct that enables this scenario in StreamInsight V2.1 is a Subject. A Subject lets me create a junction element in an existing query that I can tap into while the query is running. To set this up as an end-to-end example, let’s first define a stream simulator as our data source: var generator = myApp.DefineObservable(     (TimeSpan t) => Observable.Interval(t).Select(_ => new SourcePayload())); This ‘generator’ produces a new instance of SourcePayload with a period of t (system time) as an IObservable. SourcePayload happens to have a property of type double as its payload data. Let’s also define a sink for our example—an IObserver of double values that writes to the console: var console = myApp.DefineObserver(     (string label) => Observer.Create<double>(e => Console.WriteLine("{0}: {1}", label, e)))     .Deploy("ConsoleSink"); The observer takes a string as parameter which is used as a label on the console, so that we can distinguish the output of different sink instances. Note that we also deploy this observer, so that we can retrieve it later from the server from a different process. Remember how we defined the aggregation as an IQStreamable function in the previous article? We will use that as well: var avg = myApp     .DefineStreamable((IQStreamable<SourcePayload> s, TimeSpan w) =>         from win in s.TumblingWindow(w)         select win.Avg(e => e.Value))     .Deploy("AverageQuery"); Then we define the Subject, which acts as an observable sequence as well as an observer. Thus, we can feed a single source into the Subject and have multiple consumers—that can come and go at runtime—on the other side: var subject = myApp.CreateSubject("Subject", () => new Subject<SourcePayload>()); Subject are always deployed automatically. Their name is used to retrieve them from a (potentially) different process (see below). Note that the Subject as we defined it here doesn’t know anything about temporal streams. It is merely a sequence of SourcePayloads, without any notion of StreamInsight point events or CTIs. So in order to compose a temporal query on top of the Subject, we need to 'promote' the sequence of SourcePayloads into an IQStreamable of point events, including CTIs: var stream = subject.ToPointStreamable(     e => PointEvent.CreateInsert<SourcePayload>(e.Timestamp, e),     AdvanceTimeSettings.StrictlyIncreasingStartTime); In a later posting we will show how to use Subjects that have more awareness of time and can be used as a junction between QStreamables instead of IQbservables. Having turned the Subject into a temporal stream, we can now define the aggregate on this stream. We will use the IQStreamable entity avg that we defined above: var longAverages = avg(stream, TimeSpan.FromSeconds(5)); In order to run the query, we need to bind it to a sink, and bind the subject to the source: var standardQuery = longAverages     .Bind(console("5sec average"))     .With(generator(TimeSpan.FromMilliseconds(300)).Bind(subject)); Lastly, we start the process: standardQuery.Run("StandardProcess"); Now we have a simple query running end-to-end, producing results. What follows next is the crucial part of tapping into the Subject and adding another query that runs in parallel, using the same query definition (the “AverageQuery”) but with a different window length. We are assuming that we connected to the same StreamInsight server from a different process or even client, and thus have to retrieve the previously deployed entities through their names: // simulate the addition of a 'fast' query from a separate server connection, // by retrieving the aggregation query fragment // (instead of simply using the 'avg' object) var averageQuery = myApp     .GetStreamable<IQStreamable<SourcePayload>, TimeSpan, double>("AverageQuery"); // retrieve the input sequence as a subject var inputSequence = myApp     .GetSubject<SourcePayload, SourcePayload>("Subject"); // retrieve the registered sink var sink = myApp.GetObserver<string, double>("ConsoleSink"); // turn the sequence into a temporal stream var stream2 = inputSequence.ToPointStreamable(     e => PointEvent.CreateInsert<SourcePayload>(e.Timestamp, e),     AdvanceTimeSettings.StrictlyIncreasingStartTime); // apply the query, now with a different window length var shortAverages = averageQuery(stream2, TimeSpan.FromSeconds(1)); // bind new sink to query and run it var fastQuery = shortAverages     .Bind(sink("1sec average"))     .Run("FastProcess"); The attached solution demonstrates the sample end-to-end. Regards, The StreamInsight Team

    Read the article

  • Nashorn ?? JDBC ? Oracle DB ?????

    - by Homma
    ???? ????????????Nashorn ?? JavaScript ??????? JDBC ? API ??????Oracle DB ?????????????????????? ?????????????????????JDBC ? API ??????????????? ????????? URL ? https://blogs.oracle.com/nashorn_ja/entry/nashorn_jdbc_1 ??? ???? ???? DB ????Oracle Linux 6.5 ?? Oracle 11.2.0.3.0 ?????????????? JDBC ????????????? DB ????????????????? ???? ?Oracle Database JDBC ???????????????????????Nashorn ?? JavaScript ?????????????????????? JDBC ? Oracle DB ??????? Nashorn ?? JavaScript ??????? JDBC ? Oracle DB ?????? JavaScript ?????? DB ???????????????? JavaScript ?????? oracle ????????? JavaScript ?????? DB ?????????????????????????????????DB ???????????? JavaScript ???????????????????????? oracle ?????????? JDBC ??????????????????????? ???? DB ?????? ?????? DB ???????????? SQL> create user test identified by "test"; SQL> grant connect, resource to test; Java 8 ??????? ???? JDK 8 ?????????????????????????????? 8u5 ???? Java 8 ??????? ???????? JDK ? yum ??????????????? # yum install ./jdk-8u5-linux-x64.rpm JDK ????????????????????? # java -version java version "1.8.0_05" Java(TM) SE Runtime Environment (build 1.8.0_05-b13) Java HotSpot(TM) 64-Bit Server VM (build 25.5-b02, mixed mode) Nashorn ????? oracle ??????????PATH ??????? $ vi ~/.bash_profile PATH=${PATH}:/usr/java/latest/bin export PATH $ . ~/.bash_profile jjs ?????????????????? $ jjs -fv nashorn full version 1.8.0_05-b13 ????????????? JDBC ?????????????? JDBC ?????????JDBC ?????? ??????????????????? ???????? JDBC ????????????????????????? ?????????????? JavaScript ??????????jjs ???????????????????? Nashorn ? JavaScript ?????????????????? JDBC ??????? jjs ????? -cp ?????? JDBC ????? JAR ??????????? $ vi version.js var OracleDataSource = Java.type("oracle.jdbc.pool.OracleDataSource"); var ods = new OracleDataSource(); ods.setURL("jdbc:oracle:thin:test/test@localhost:1521:orcl"); var conn = ods.getConnection(); var meta = conn.getMetaData(); print("JDBC driver version is " + meta.getDriverVersion()); $ jjs -cp ${ORACLE_HOME}/jdbc/lib/ojdbc6.jar version.js JDBC driver version is 11.2.0.3.0 ??????JavaScript ???????? JDBC ?????????? (11.2.0.3.0) ????????? Java.type() ??????? JavaClass ??????? new ????? Java ??????????????????????????? Java ???????????????????? ????????????????????????????????????????????????????? ?????????????????????????????????????? Java ??????????????? JavaScript ???????????????????????????????? ?????? ???????????????? jjs ???????????Nashorn ??????????????jjs ??????????????????????????? $ jjs -cp ${ORACLE_HOME}/jdbc/lib/ojdbc6.jar jjs> var OracleDataSource = Java.type("oracle.jdbc.pool.OracleDataSource"); jjs> var ods = new OracleDataSource(); jjs> ods.setURL("jdbc:oracle:thin:test/test@localhost:1521:orcl"); null jjs> var conn = ods.getConnection(); jjs> var meta = conn.getMetaData(); jjs> print("JDBC driver version is " + meta.getDriverVersion()); JDBC driver version is 11.2.0.3.0 ???????? JDBC ?????????? (11.2.0.3.0) ????????? ?????????????????????????????????????????????????????????JDBC ?????????????????????? ??? Nashorn ???????? JDBC ? API ????????????? API ???????????????? ???????? JavaScript ?????????????????????????????????? ???????????? JDBC ? DB ???????????????? JDBC ??????????????????????????? ???? Oracle Database JDBC?????? 11g????2(11.2) ??????? jjs ?????????? Nashorn User's Guide Java Scripting Programmer's Guide Oracle Nashorn: A Next-Generation JavaScript Engine for the JVM

    Read the article

  • Problems installing Memcache (PECL extension)

    - by Petrus
    I have installed memcached fine, and now I will need to install PECL extension memcache. Im running RedHat x86_64 es5. The installation gives me this: downloading memcache-2.2.6.tgz ... Starting to download memcache-2.2.6.tgz (35,957 bytes) ..........done: 35,957 bytes 11 source files, building running: phpize Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 Enable memcache session handler support? [yes] : Notice: Use of undefined constant STDIN - assumed 'STDIN' in PEAR/Frontend/CLI.php on line 304 Warning: fgets() expects parameter 1 to be resource, string given in PEAR/Frontend/CLI.php on line 304 Warning: fgets() expects parameter 1 to be resource, string given in /usr/lib/php/PEAR/Frontend/CLI.php on line 304 building in /root/tmp/pear-build-root/memcache-2.2.6 running: /root/tmp/pear/memcache/configure --enable-memcache-session=yes checking for egrep... grep -E checking for a sed that does not truncate output... /bin/sed checking for cc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ANSI C... none needed checking how to run the C preprocessor... cc -E checking for icc... no checking for suncc... no checking whether cc understands -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for PHP prefix... /usr checking for PHP includes... -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib checking for PHP extension directory... /usr/lib/php/extensions/no-debug-non-zts-20090626 checking for PHP installed headers prefix... /usr/include/php checking if debug is enabled... no checking if zts is enabled... no checking for re2c... re2c checking for re2c version... invalid configure: WARNING: You will need re2c 0.13.4 or later if you want to regenerate PHP parsers. checking for gawk... gawk checking whether to enable memcache support... yes, shared checking whether to enable memcache session handler support... yes checking for the location of ZLIB... no checking for the location of zlib... /usr checking for session includes... /usr/include/php checking for memcache session support... enabled checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking the maximum length of command line arguments... 98304 checking command to parse /usr/bin/nm -B output from cc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no creating libtool appending configuration tag "CXX" to libtool configure: creating ./config.status config.status: creating config.h running: make /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache.c -o memcache.lo mkdir .libs cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache.c -fPIC -DPIC -o .libs/memcache.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_queue.c -o memcache_queue.lo cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_queue.c -fPIC -DPIC -o .libs/memcache_queue.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_standard_hash.c -o memcache_standard_hash.lo cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_standard_hash.c -fPIC -DPIC -o .libs/memcache_standard_hash.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_consistent_hash.c -o memcache_consistent_hash.lo cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_consistent_hash.c -fPIC -DPIC -o .libs/memcache_consistent_hash.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_session.c -o memcache_session.lo cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_session.c -fPIC -DPIC -o .libs/memcache_session.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=link cc -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -o memcache.la -export-dynamic -avoid-version -prefer-pic -module -rpath /root/tmp/pear-build-root/memcache-2.2.6/modules memcache.lo memcache_queue.lo memcache_standard_hash.lo memcache_consistent_hash.lo memcache_session.lo cc -shared .libs/memcache.o .libs/memcache_queue.o .libs/memcache_standard_hash.o .libs/memcache_consistent_hash.o .libs/memcache_session.o -Wl,-soname -Wl,memcache.so -o .libs/memcache.so creating memcache.la (cd .libs && rm -f memcache.la && ln -s ../memcache.la memcache.la) /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=install cp ./memcache.la /root/tmp/pear-build-root/memcache-2.2.6/modules cp ./.libs/memcache.so /root/tmp/pear-build-root/memcache-2.2.6/modules/memcache.so cp ./.libs/memcache.lai /root/tmp/pear-build-root/memcache-2.2.6/modules/memcache.la PATH="$PATH:/sbin" ldconfig -n /root/tmp/pear-build-root/memcache-2.2.6/modules ---------------------------------------------------------------------- Libraries have been installed in: /root/tmp/pear-build-root/memcache-2.2.6/modules If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- Build complete. Don't forget to run 'make test'. running: make INSTALL_ROOT="/root/tmp/pear-build-root/install-memcache-2.2.6" install Installing shared extensions: /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php/extensions/no-debug-non-zts-20090626/ running: find "/root/tmp/pear-build-root/install-memcache-2.2.6" | xargs ls -dils 361232 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6 361263 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr 361264 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib 361265 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php 361266 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php/extensions 361267 4 drwxr-xr-x 2 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php/extensions/no-debug-non-zts-20090626 361262 236 -rwxr-xr-x 1 root root 235575 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php/extensions/no-debug-non-zts-20090626/memcache.so Build process completed successfully Installing '/usr/lib/php/extensions/no-debug-non-zts-20090626/memcache.so' install ok: channel://pecl.php.net/memcache-2.2.6 Extension memcache enabled in php.ini The memcache.so object is not in /usr/local/lib/php/extensions/no-debug-non-zts-20090626 I tried as well to install this extension "memcached 1.0.2 (PHP extension for interfacing with memcached via libmemcached library)" but it failed: downloading memcached-1.0.2.tgz ... Starting to download memcached-1.0.2.tgz (22,724 bytes) ........done: 22,724 bytes 4 source files, building running: phpize Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 building in /root/tmp/pear-build-root/memcached-1.0.2 running: /root/tmp/pear/memcached/configure checking for egrep... grep -E checking for a sed that does not truncate output... /bin/sed checking for cc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ANSI C... none needed checking how to run the C preprocessor... cc -E checking for icc... no checking for suncc... no checking whether cc understands -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for PHP prefix... /usr checking for PHP includes... -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib checking for PHP extension directory... /usr/lib/php/extensions/no-debug-non-zts-20090626 checking for PHP installed headers prefix... /usr/include/php checking if debug is enabled... no checking if zts is enabled... no checking for re2c... re2c checking for re2c version... invalid configure: WARNING: You will need re2c 0.13.4 or later if you want to regenerate PHP parsers. checking for gawk... gawk checking whether to enable memcached support... yes, shared checking for libmemcached... yes, shared checking whether to enable memcached session handler support... yes checking whether to enable memcached igbinary serializer support... no checking for ZLIB... yes, shared checking for zlib location... /usr checking for session includes... /usr/include/php checking for memcached session support... enabled checking for memcached igbinary support... disabled checking for libmemcached location... configure: error: memcached support requires libmemcached. Use --with-libmemcached-dir= to specify the prefix where libmemcached headers and library are located ERROR: `/root/tmp/pear/memcached/configure' failed The memcached.so object is not in /usr/local/lib/php/extensions/no-debug-non-zts-20090626 Is there a kind soul out there that can solve this puzzle?

    Read the article

  • Slow NFS and GFS2 performance

    - by Tiago
    Recently I've designed and configured a 4 node cluster for a webapp that does lots of file handling. The cluster have been broken down into 2 main roles, webserver and storage. Each role is replicated to a second server using drbd in active/passive mode. The webserver does a NFS mount of the data directory of the storage server and the latter also has a webserver running to serve files to browser clients. In the storage servers I've created a GFS2 FS to hold the data which is wired to drbd. I've chose GFS2 mainly because the announced performance and also because the volume size which has to be pretty high. Since we entered production I've been facing two problems that I think are deeply connected. First of all, the NFS mount on the webservers keeps hanging for a minute or so and then resumes normal operations. By analyzing the logs I've found out that NFS stops answering for a while and outputs the following log lines: Oct 15 18:15:42 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:44 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:46 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:47 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:47 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:47 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:48 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:48 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:51 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:52 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:52 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:55 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:55 <server hostname> kernel: nfs: server active.storage.vlan not responding, still trying Oct 15 18:15:58 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK Oct 15 18:15:59 <server hostname> kernel: nfs: server active.storage.vlan OK In this case, the hang lasted for 16 seconds but sometimes it takes 1 or 2 minutes to resume normal operations. My first guess was this was happening due to heavy load of the NFS mount and that by increasing RPCNFSDCOUNT to a higher value, this would become stable. I've increased it several times and apparently, after a while, the logs started appearing less times. The value is now on 32. After further investigating the issue, I've came across a different hang, despite the NFS messages still appear in the logs. Sometimes, the GFS2 FS simply hangs which causes both the NFS and the storage webserver to serve files. Both stay hang for a while and then they resume normal operations. This hangs leaves no trace on client side (also leaves no NFS ... not responding messages) and, on the storage side, the log system appears to be empty, even though the rsyslogd is running. The nodes connect themselves through a 10Gbps non-dedicated connection but I don't think this is an issue because the GFS2 hang is confirmed but connecting directly to the active storage server. I've been trying to solve this for a while now and I've tried different NFS configuration options, before I've found out the GFS2 FS is also hanging. The NFS mount is exported as such: /srv/data/ <ip_address>(rw,async,no_root_squash,no_all_squash,fsid=25) And the NFS client mounts with: mount -o "async,hard,intr,wsize=8192,rsize=8192" active.storage.vlan:/srv/data /srv/data After some tests, these were the configurations that yielded more performance to the cluster. I am desperate to find a solution for this as the cluster is already in production mode and I need to fix this so that this hangs won't happen in the future and I don't really know for sure what and how I should be benchmarking. What I can tell is that this is happening due to heavy loads as I have tested the cluster earlier and this problems weren't happening at all. Please tell me if you need me to provide configuration details of the cluster, and which do you want me to post. As last resort I can migrate the files to a different FS but I need some solid pointers on whether this will solve this problems as the volume size is extremely large at this point. The servers are being hosted by a third-party enterprise and I don't have physical access to them. Best regards. EDIT 1: The servers are physical servers and their specs are: Webservers: Intel Bi Xeon E5606 2x4 2.13GHz 24GB DDR3 Intel SSD 320 2 x 120GB Raid 1 Storage: Intel i5 3550 3.3GHz 16GB DDR3 12 x 2TB SATA Initially there was a VRack setup between the servers but we've upgraded one of the storage servers to have more RAM and it wasn't inside the VRack. They connect through a shared 10Gbps connection between them. Please note that it is the same connection that is used for public access. They use a single IP (using IP Failover) to connect between them and to allow for a graceful failover. NFS is therefore over a public connection and not under any private network (it was before the upgrade, were the problem still existed). The firewall was configured and tested thoroughly but I disabled it for a while to see if the problem still occurred, and it did. From my knowledge the hosting provider isn't blocking or limiting the connection between either the servers and the public domain (at least under a given bandwidth consumption threshold that hasn't been reached yet). Hope this helps figuring out the problem. EDIT 2: Relevant software versions: CentOS 2.6.32-279.9.1.el6.x86_64 nfs-utils-1.2.3-26.el6.x86_64 nfs-utils-lib-1.1.5-4.el6.x86_64 gfs2-utils-3.0.12.1-32.el6_3.1.x86_64 kmod-drbd84-8.4.2-1.el6_3.elrepo.x86_64 drbd84-utils-8.4.2-1.el6.elrepo.x86_64 DRBD configuration on storage servers: #/etc/drbd.d/storage.res resource storage { protocol C; on <server1 fqdn> { device /dev/drbd0; disk /dev/vg_storage/LV_replicated; address <server1 ip>:7788; meta-disk internal; } on <server2 fqdn> { device /dev/drbd0; disk /dev/vg_storage/LV_replicated; address <server2 ip>:7788; meta-disk internal; } } NFS Configuration in storage servers: #/etc/sysconfig/nfs RPCNFSDCOUNT=32 STATD_PORT=10002 STATD_OUTGOING_PORT=10003 MOUNTD_PORT=10004 RQUOTAD_PORT=10005 LOCKD_UDPPORT=30001 LOCKD_TCPPORT=30001 (can there be any conflict in using the same port for both LOCKD_UDPPORT and LOCKD_TCPPORT?) GFS2 configuration: # gfs2_tool gettune <mountpoint> incore_log_blocks = 1024 log_flush_secs = 60 quota_warn_period = 10 quota_quantum = 60 max_readahead = 262144 complain_secs = 10 statfs_slow = 0 quota_simul_sync = 64 statfs_quantum = 30 quota_scale = 1.0000 (1, 1) new_files_jdata = 0 Storage network environment: eth0 Link encap:Ethernet HWaddr <mac address> inet addr:<ip address> Bcast:<bcast address> Mask:<ip mask> inet6 addr: <ip address> Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:957025127 errors:0 dropped:0 overruns:0 frame:0 TX packets:1473338731 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2630984979622 (2.3 TiB) TX bytes:1648430431523 (1.4 TiB) eth0:0 Link encap:Ethernet HWaddr <mac address> inet addr:<ip failover address> Bcast:<bcast address> Mask:<ip mask> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 The IP addresses are statically assigned with the given network configurations: DEVICE="eth0" BOOTPROTO="static" HWADDR=<mac address> ONBOOT="yes" TYPE="Ethernet" IPADDR=<ip address> NETMASK=<net mask> and DEVICE="eth0:0" BOOTPROTO="static" HWADDR=<mac address> IPADDR=<ip failover> NETMASK=<net mask> ONBOOT="yes" BROADCAST=<bcast address> Hosts file to allow for a graceful NFS failover in conjunction with NFS option fsid=25 set on both storage servers: #/etc/hosts <storage ip failover address> active.storage.vlan <webserver ip failover address> active.service.vlan As you can see, packet errors are down to 0. I've also ran ping for a long time without any packet loss. MTU size is the normal 1500. As there is no VLan by now, this is the MTU used to communicate between servers. The webservers' network environment is similar. One thing I forgot to mention is that the storage servers handle ~200GB of new files each day through the NFS connection, which is a key point for me to think this is some kind of heavy load problem with either NFS or GFS2. If you need further configuration details please tell me. EDIT 3: Earlier today we had a major filesystem crash on the storage server. I couldn't get the details of the crash right away because the server stop responding. After the reboot, I noticed the filesystem was extremely slow, and I was not being able to serve a single file through either NFS or httpd, perhaps due to cache warming or so. Nevertheless, I've been monitoring the server closely and the following error came up in dmesg. The source of the problem is clearly GFS, which is waiting for a lock and ends up starving after a while. INFO: task nfsd:3029 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. nfsd D 0000000000000000 0 3029 2 0x00000080 ffff8803814f79e0 0000000000000046 0000000000000000 ffffffff8109213f ffff880434c5e148 ffff880624508d88 ffff8803814f7960 ffffffffa037253f ffff8803815c1098 ffff8803814f7fd8 000000000000fb88 ffff8803815c1098 Call Trace: [<ffffffff8109213f>] ? wake_up_bit+0x2f/0x40 [<ffffffffa037253f>] ? gfs2_holder_wake+0x1f/0x30 [gfs2] [<ffffffff814ff42e>] __mutex_lock_slowpath+0x13e/0x180 [<ffffffff814ff2cb>] mutex_lock+0x2b/0x50 [<ffffffffa0379f21>] gfs2_log_reserve+0x51/0x190 [gfs2] [<ffffffffa0390da2>] gfs2_trans_begin+0x112/0x1d0 [gfs2] [<ffffffffa0369b05>] ? gfs2_dir_check+0x35/0xe0 [gfs2] [<ffffffffa0377943>] gfs2_createi+0x1a3/0xaa0 [gfs2] [<ffffffff8121aab1>] ? avc_has_perm+0x71/0x90 [<ffffffffa0383d1e>] gfs2_create+0x7e/0x1a0 [gfs2] [<ffffffffa037783f>] ? gfs2_createi+0x9f/0xaa0 [gfs2] [<ffffffff81188cf4>] vfs_create+0xb4/0xe0 [<ffffffffa04217d6>] nfsd_create_v3+0x366/0x4c0 [nfsd] [<ffffffffa0429703>] nfsd3_proc_create+0x123/0x1b0 [nfsd] [<ffffffffa041a43e>] nfsd_dispatch+0xfe/0x240 [nfsd] [<ffffffffa025a5d4>] svc_process_common+0x344/0x640 [sunrpc] [<ffffffff810602a0>] ? default_wake_function+0x0/0x20 [<ffffffffa025ac10>] svc_process+0x110/0x160 [sunrpc] [<ffffffffa041ab62>] nfsd+0xc2/0x160 [nfsd] [<ffffffffa041aaa0>] ? nfsd+0x0/0x160 [nfsd] [<ffffffff81091de6>] kthread+0x96/0xa0 [<ffffffff8100c14a>] child_rip+0xa/0x20 [<ffffffff81091d50>] ? kthread+0x0/0xa0 [<ffffffff8100c140>] ? child_rip+0x0/0x20

    Read the article

  • .htaccess not working (mod_rewrite)

    - by Mike Curry
    Edit: I am pretty sure my .htaccess file is NOT being executed, and the problem is NOT with my rewrite rules. I have not having any luck getting my .htaccess with mod_rewrite working. Basically all I am trying to do is remove 'www' from "http://www.site.com" and "https://www.site.com". If there is anything I am missing (conf files, etc let me know I willl update this) I jsut can't see whats wrong here... I am using a 1&1 VPS III Virtual private server... anyone ever have this issue? I am using Ubuntu 8.04 Server LTS. Here is my .htaccess file (located @ /var/www/site/trunk/html/) Options +FollowSymLinks RewriteEngine on RewriteCond %{HTTP_HOST} ^www\.(.*) [NC] RewriteRule (.*) //%1/$1 [L,R=301] My mod_rewrite is enabled: The auto regenerated sym link is there in mods-available and /usr/lib/apache2/modules/ contains mod_rewrite.so root@s15348441:/etc/apache2/mods-available# more rewrite.load LoadModule rewrite_module /usr/lib/apache2/modules/mod_rewrite.so root@s15348441:/var/log# apache2ctl -t -D DUMP_MODULES Loaded Modules: core_module (static) log_config_module (static) logio_module (static) mpm_prefork_module (static) http_module (static) so_module (static) alias_module (shared) auth_basic_module (shared) authn_file_module (shared) authz_default_module (shared) authz_groupfile_module (shared) authz_host_module (shared) authz_user_module (shared) autoindex_module (shared) cgi_module (shared) dir_module (shared) env_module (shared) mime_module (shared) negotiation_module (shared) php5_module (shared) rewrite_module (shared) setenvif_module (shared) ssl_module (shared) status_module (shared) Syntax OK My apache config files: apache2.conf # # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.2/ for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log" # with ServerRoot set to "" will be interpreted by the # server as "//var/log/apache2/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation (available # at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/etc/apache2" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # #<IfModule !mpm_winnt.c> #<IfModule !mpm_netware.c> LockFile /var/lock/apache2/accept.lock #</IfModule> #</IfModule> # # PidFile: The file in which the server should record its process # identification number when it starts. # This needs to be set in /etc/apache2/envvars # PidFile ${APACHE_PID_FILE} # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_worker_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog /var/log/apache2/error.log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # Include module configuration: Include /etc/apache2/mods-enabled/*.load Include /etc/apache2/mods-enabled/*.conf # Include all the user configurations: Include /etc/apache2/httpd.conf # Include ports listing Include /etc/apache2/ports.conf # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # # ServerTokens # This directive configures what you return as the Server HTTP response # Header. The default is 'Full' which sends information about the OS-Type # and compiled in modules. # Set to one of: Full | OS | Minor | Minimal | Major | Prod # where Full conveys the most information, and Prod the least. # ServerTokens Full # # Optionally add a line containing the server version and virtual host # name to server-generated pages (internal error documents, FTP directory # listings, mod_status and mod_info output etc., but not CGI generated # documents or custom error documents). # Set to "EMail" to also include a mailto: link to the ServerAdmin. # Set to one of: On | Off | EMail # ServerSignature On # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # Putting this all together, we can internationalize error responses. # # We use Alias to redirect any /error/HTTP_<error>.html.var response to # our collection of by-error message multi-language collections. We use # includes to substitute the appropriate text. # # You can modify the messages' appearance without changing any of the # default HTTP_<error>.html.var files by adding the line: # # Alias /error/include/ "/your/include/path/" # # which allows you to create your own set of files by starting with the # /usr/share/apache2/error/include/ files and copying them to /your/include/path/, # even on a per-VirtualHost basis. The default include files will display # your Apache version number and your ServerAdmin email address regardless # of the setting of ServerSignature. # # The internationalized error documents require mod_alias, mod_include # and mod_negotiation. To activate them, uncomment the following 30 lines. # Alias /error/ "/usr/share/apache2/error/" # # <Directory "/usr/share/apache2/error"> # AllowOverride None # Options IncludesNoExec # AddOutputFilter Includes html # AddHandler type-map var # Order allow,deny # Allow from all # LanguagePriority en cs de es fr it nl sv pt-br ro # ForceLanguagePriority Prefer Fallback # </Directory> # # ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var # ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var # ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var # ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var # ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var # ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var # ErrorDocument 410 /error/HTTP_GONE.html.var # ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var # ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var # ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var # ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var # ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var # ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var # ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var # ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var # ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var # ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var # Include of directories ignores editors' and dpkg's backup files, # see README.Debian for details. # Include generic snippets of statements Include /etc/apache2/conf.d/ # Include the virtual host configurations: Include /etc/apache2/sites-enabled/ My default config file for www on apache NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] #SSLEnable #SSLVerifyClient none #SSLCertificateFile /usr/local/ssl/crt/public.crt #SSLCertificateKeyFile /usr/local/ssl/private/private.key DocumentRoot /var/www/site/trunk/html <Directory /> Options FollowSymLinks AllowOverride all </Directory> <Directory /var/www/site/trunk/html> Options Indexes FollowSymLinks MultiViews AllowOverride all Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> My ssl config file NameVirtualHost *:443 <VirtualHost *:443> ServerAdmin [email protected] #SSLEnable #SSLVerifyClient none #SSLCertificateFile /usr/local/ssl/crt/public.crt #SSLCertificateKeyFile /usr/local/ssl/private/private.key DocumentRoot /var/www/site/trunk/html <Directory /> Options FollowSymLinks AllowOverride all </Directory> <Directory /var/www/site/trunk/html> Options Indexes FollowSymLinks MultiViews AllowOverride all Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn SSLEngine On SSLCertificateFile /usr/local/ssl/crt/public.crt SSLCertificateKeyFile /usr/local/ssl/private/private.key CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> My /etc/apache2/httpd.conf is blank The directory /etc/apache2/conf.d has nothing in it but one file (charset) contents of /etc/apache2/conf.dcharset # Read the documentation before enabling AddDefaultCharset. # In general, it is only a good idea if you know that all your files # have this encoding. It will override any encoding given in the files # in meta http-equiv or xml encoding tags. #AddDefaultCharset UTF-8 My apache error.log [Wed Jun 03 00:12:31 2009] [error] [client 216.168.43.234] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) [Wed Jun 03 05:03:51 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:03:54 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:48 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:51 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:54 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:57 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:17:28 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:26:23 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 05:26:34 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 06:03:41 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 06:03:51 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 06:25:07 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 06:25:17 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 12:09:25 2009] [error] [client 61.139.105.163] File does not exist: /var/www/site/trunk/html/fastenv [Wed Jun 03 15:04:42 2009] [notice] Graceful restart requested, doing restart [Wed Jun 03 15:04:43 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 15:29:51 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 15:29:54 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 15:30:32 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 15:45:54 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 15:46:05 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations

    Read the article

  • Displaying wait cursor in while backgroundworker is running

    - by arc1880
    During the start of my windows application, I have to make a call to a web service to retrieve some default data to load onto my application. During the load of the form, I run a backgroundworker to retrieve this data. I want to display the wait cursor until this data is retrieved. How would I do this? I've tried setting the wait cursor before calling the backgroundworker to run. When I report a progress of 100 then I set it back to the default cursor. The wait cursor comes up but when I move the mouse it disappears. Environment: Windows 7 Pro 64-bit VS2010 C# .NET 4.0 Windows Forms EDIT: I am setting the cursor the way Jay Riggs suggested. It only works if I don't move the mouse. **UPDATE: I have created a button click which does the following: When I do the button click and move my mouse, the wait cursor appears regardless if I move my mouse or not. void BtnClick() { Cursor = Cursors.WaitCursor; Thread.Sleep(8000); Cursor = Cursors.Default; } If I do the following: I see the wait cursor and when I move the mouse it disappears inside the form. If I move to my status bar or the menu bar the wait cursor appears. Cursor = Cursors.WaitCursor; if (!backgroundWorker.IsBusy) { backGroundWorker.RunWorkerAsync(); } void backGroundWorkerDoWork(object sender, DoWorkEventArgs e) { Thread.Sleep(8000); } void backGroundWorkerCompleted(object sender, RunWorkerCompletedEventArgs e) { Cursor = Cursors.Default; } If I do the following: The wait cursor appears and when I move the mouse it still appears but will sometimes flicker off and on when moving in text fields. if (!backgroundWorker.IsBusy) { backGroundWorker.RunWorkerAsync(); } void backGroundWorkerDoWork(object sender, DoWorkEventArgs e) { UseWaitCursor = true; Thread.Sleep(8000); } void backGroundWorkerCompleted(object sender, RunWorkerCompletedEventArgs e) { UseWaitCursor = false; }

    Read the article

  • Android ADT Eclipse plugin, parseSDKContent failed

    - by Sebastian Ganslandt
    I've just set up my first Android development environment consisting of Eclipse 3.5 Mac OSX 10.5 Android SDK for x86 macs ADT Eclipse plugin 0.9.6 I've set set $PATH to my SDK/tools directory (which shouldn't matter if I only use Eclipse right?) and started Eclipse, but when I try to set the path to the SDK in Eclipse, i get the error "parseSdkContent failed". The stack trace of from the thrown exception is java.lang.IllegalArgumentException: http://www.w3.org/2001/XMLSchema at javax.xml.validation.SchemaFactory.newInstance(SchemaFactory.java:181) at com.android.ide.eclipse.adt.internal.sdk.LayoutDevicesXsd.getValidator(Unknown Source) at com.android.ide.eclipse.adt.internal.sdk.LayoutDeviceManager.parseLayoutDevices(Unknown Source) at com.android.ide.eclipse.adt.internal.sdk.LayoutDeviceManager.loadDefaultLayoutDevices(Unknown Source) at com.android.ide.eclipse.adt.internal.sdk.LayoutDeviceManager.loadDefaultAndUserDevices(Unknown Source) at com.android.ide.eclipse.adt.internal.sdk.Sdk.<init>(Unknown Source) at com.android.ide.eclipse.adt.internal.sdk.Sdk.loadSdk(Unknown Source) at com.android.ide.eclipse.adt.AdtPlugin$13.run(Unknown Source) at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55) I can't see that I've missed anything in the setup process, according to the instructions it should basically just work out of the box. Any ideas as to why this might fail?

    Read the article

< Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508  | Next Page >