Search Results

Search found 23472 results on 939 pages for 'show'.

Page 501/939 | < Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508  | Next Page >

• Use a media player in Linux just to play files from an iPod device (no sync, no manage, just play)?

  - by Somebody still uses you MS-DOS

  I have an ipod classic 160gb, that I sync with my machine at home. I use Linux at work, and want to just plug my ipod and just listen to the tracks, with all the playlists and such. I don't want to sync nothing, I just want to listen to the tracks as if I was using the ipod itself. Why? Because this way I can use the usb port. So, I don't want to manage my ipod in Linux, I just want to listen to the tracks on it in Linux, like it was a local library but it's instead in my ipod. (I've tried gtkpod, it works to show my files, but I can't play, shuffle, etc. It would be interesting to have a complete audio software to handle everything like it was a local library)

  Read the article

• need for tcp fine-tuning on heavily used proxy server

  - by Vijay Gharge

  Hi all, I am using squid like Internet proxy server on RHEL 4 update 6 & 8 with quite heavy load i.e. 8k established connections during peak hour. Without depending much on application provider's expertise I want to achieve maximum o/p from linux. W.r.t. that I have certain questions as following: How to find out if there is scope for further tcp fine-tuning (without exhausting available resources) as the benchmark values given by vendor looks poor! Is there any parameter value that is available from OS / network stack that will show me the results. If at all there is scope, how shall I identify & configure OS tcp stack parameters i.e. using sysctl or any specific parameter Post tuning how shall I clearly measure performance enhancement / degradation ?

  Read the article

• Laptop white screen on power-up. Still displays via HDMI output

  - by Inno

  my wife's laptop recently started displaying a white screen. It doesn't show post or anything, just a white screen when it's powered on. However, it works normally with HDMI output to our television. I took it apart and fiddled with both ends of the display cable, but I either didn't fiddle correctly or that's just not the problem. I also noticed that the screen won't turn off anymore when the laptop is closed. Is there a name for the mechanism that controls this function, so I can try and locate it? My guesses are that the problem lies with the screen itself or the display cable, but I'm curious if there's anything else I might be overlooking. Also of note is that the left hinge is partially broken. The corner of the plastic computer case broke off, so the hinge is exposed and doesn't stay in place. I've tried holding it in place, wiggling it around, tapping various parts of the computer, but the white screen remains.

  Read the article

• Basic Puppet installation with Solaris 11.2 beta

  - by user13366125

  At the recent announcement we talked a lot about the Puppet integration. But how do you set it up? I want to show this in this blog entry. However this example i'm using is even useful in practice. Due to the extremely low overhead of zones i'm frequently seeing really large numbers of zones on a single system. Changing /etc/hosts or changing an SMF service property on 3 systems is not that hard. Doing it on a system with 500 zones is ... let say it diplomatic ... a job you give to someone you want to punish. Puppet can help in this case making of managing the configuration and to ease the distribution. You describe the changes you want to make in a file or set of file called manifest in the Puppet world and then roll them out to your servers, no matter if they are virtual or physical. A warning at first: Puppet is a really,really vast topic. This article is really basic and it doesn't goes more than just even toe's deep into the possibilities and capabilities of Puppet. It doesn't try to explain Puppet ... just how you get it up and running and do basic tests. There are many good books on Puppet. Please read one of them, and the concepts and the example will get much clearer immediately. (more)

  Read the article

• What You Said: How Do You Browse Securely Away From Home?

  - by Jason Fitzpatrick

  Responses to this week’s Ask the Reader question show that just because you’re away from home doesn’t mean you have to give up the security and privacy that your home network provides. Earlier this week we asked you to share you browsing away from home security tips and tricks and obliged. JC offered one of the more entertaining tales of away-from-home browsing: Recently a bunch of us stayed at a high end resort down in Mexico. Internet was offered as a pay per device service at about $80/week/device. Considering we had about 12 wifi devices there among us(a few geeks), I decided to plan ahead. I setup a WRT54G as a WiFi client with a vpn back to my house and NAT. Setup a second one as a basic wireless access point with password and plugged it into the first. Onsite we setup the devices and connected to the wireless with one paid account(tied to the MAC address). Everyone connected to the other device for wireless access and it was all tunnelled through my home network with encryption. HTG Explains: Learn How Websites Are Tracking You Online Here’s How to Download Windows 8 Release Preview Right Now HTG Explains: Why Linux Doesn’t Need Defragmenting

  Read the article

• Web Development - How to access custom host, defined in my hosts file, from another device in the same network

  - by Neara

  Ok, I hope i'll be able to explain the issue im experiencing. I'm working on a project, that has 2 parts: one takes all requests from usual localhost, the other handles requests from myhost.local. While trying to access both addresses from my computer, it works ok. But now i need to test myhost.local on mobile devices, connected to the same network. Usually i would just run server from my computer ip in the network: python manage.py runserver 10.0.0.8:8000 And then from any device, going to 10.0.0.8:8000 would show the project im working on. However, now accessing that ip address routes me straight to localhost. So, my question is how to access myhost.local from another device in same network? I don't want to change router settings, if that can be avoided, cos sometimes i work from places where i can't access router admin. Is there any network settings on my computer, that i can change to fix the routing to myhost.local w.o losing access to localhost as well?

  Read the article

• how to correctly download tomcat 6 on centos 5.5

  - by user582862

  hi guys, i am a big confused about how to install tomcat 6 on centos 5.5 final. this is what i am trying to do: # cd /etc/yum.repos.d/ # wget http://jpackage.org/jpackage50.repo # yum install tomcat6 tomcat6-webapps tomcat6-admin-webapps but when i type the widget command, this is what i get: Resolving www.jpackage.org... failed: Temporary failure in name resolution. wget: unable to resolve host address `www.jpackage.org' could anyone kindly show me the right way please. really in trouble at the moment with this. thanks in advance.

  Read the article

• Catalyst Control Center removal

  - by Allan

  I've recently tested a graphics card on a machine that required different drivers than my onboard integrated graphics, so I had catalyst control center installed. After I pulled out the graphics card and went back to using the onboard graphics, I deleted the catalyst center through control panel - programs.. which was fine. But apparently it didn't really remove it. it doesn't show up under programs anymore but when I reboot windows I get an error saying "The catalyst Control Center is not supported by the driver version of your enabled graphics adapter" and its still in the process bar... how do I permanently remove it?

  Read the article

• How to adjust the shooting angle of an object

  - by Blue

  I've been trying to add an angle adjustment feature to a power bar that I got from unity3dStudents. But I can't seem to get the code right. I'm using addforce to rigidbody, it works but the power is too great. I also found that rotating the object it's shooting from changes the angle. But I don't know how to proceed from that. Can somebody show me the problem with the script below, as in how to add height to the addforce without it going to far up or to the side? Or how to change the angle of the object? var theAngle : int; var maxAngle : int = 130; var minAngle : int = 0; var angleIncreasing : boolean = false; var angleDecreasing : boolean = false; var rotationSpeed : float = 10; var ball : Rigidbody; var spawnPos : Transform; var shotForce : float = 25; function Update () { if(Input.GetKeyDown("k")){ angleIncreasing = true; angleDecreasing = false; } if(Input.GetKeyUp("k")){ angleIncreasing = false; } if(Input.GetKeyDown("l")){ angleIncreasing = false; angleDecreasing = true; } if(Input.GetKeyUp("l")){ angleDecreasing = false; } ------- if(angleIncreasing){ theAngle += Time.deltaTime * rotationSpeed; if(theAngle > maxAngle){ theAngle = maxAngle; } } if(angleDecreasing){ theAngle -= Time.deltaTime * rotationSpeed; if(theAngle < minAngle){ theAngle = minAngle; } } } function Shoot(power : float, angle : int){ ---- var forward : Vector3 = spawnPos.forward; var upward : Vector3 = spawnPos.up; pFab.AddForce(forward * power * shotForce); pFab.AddForce(upward * angle * 10); ---- }

  Read the article

• Tomcat's connection pool opens only 20 connections to mysql

  - by stck

  I have a java application with following line in context.xml <Resource driverClassName="com.mysql.jdbc.Driver" maxActive="100" maxIdle="30" initialSize="10" maxWait="7000" name="jdbc/app" password="pass" type="javax.sql.DataSource" url="jdbc:mysql://dbhost:3306/dbname?autoReconnect=true" username="user" validationQuery="SELECT 1" removeAbandoned="true" removeAbandonedTimeout="30" logAbandoned="true" /> In mysql 'show variables' tells me that max_connections is 151. Still, use information_schema; select count(*) from processlist where User = 'user'; never shows me more than 20 connections. On tomcat's catalina.out -log I get Caused by: org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot get a connection, pool exhausted at org.apache.tomcat.dbcp.dbcp.PoolingDataSource.getConnection(PoolingDataSource.java:103) at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSource.java:540) at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(DataSourceUtils.java:113) at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:79) What should I check for to find the problem?

  Read the article

• MS Word showing unwanted table borders on screen (but not on print preview)

  - by Jivlain

  I have a MS Word document with a number of tables. The other day when I created it, the tables all had no borders. Today, I opened it up to find that the tables did have borders. However, when I check the border properties on each table, it says that there are no borders. The tables are displayed with cell borders in all view modes except for the reading layout, and they do not show up on print preview. As this document is going to generally be for on-screen viewing, I need to get rid of the borders. How can I accomplish this? (this is a MS Word 2003 *.doc document, in MS Word 2003, which has been the only editor involved.)

  Read the article

• how i can deal with Uiactionsheet and three20 ?

  - by rain

  i am follow this tutorial http://iosstuff.wordpress.com/2011/0...e20-framework/ I know about displaying a single photo by clicking on one from the thumbnail viewer is provided to you for free by Three20. In addition, the library also provides all of the native functions such as pinch-to-zoom, swiping to navigate and tapping to hide/show the navigation arrows and back button. I want to add a button that if clicked by the user, would display a UIActionSheet with options for sharing the photo by mail or MMS and the user would choose one of them. I see a lot of tutorials about this but I need to do this by my self. so plz help me

  Read the article

• Root cause for high CPU usage; which measurement to trust more: Windows Task Manager or Process Explorer?

  - by p.campbell

  Consider this Windows 8.1 machine (in-place upgrade from Windows 8) with differing reports on its CPU usage. The machine is idle, and has been for 3 days. There are no CPU intensive tasks running currently nor over the 3 day idle period. Windows Task Manager is reporting CPU usage constantly at an incredibly high value (and increasing over time!) at around 75%. Process Explorer from SysInternals reports that the CPU usage is much different at around 42% How does Process Explorer report 42.14% usage, but its columns report Idle at 57%, with the sum of the other processes not even approaching 10%? Which of these two values should I trust more, and why should it be trusted over the other measurement? How can I actually determine which process is causing Task Manager to report its values? These Proc Exp metrics were taken with Administrator privileges, and with option 'Show Details for All Processes' Click for larger view:

  Read the article

• Can I use standard tools to get the full name of a process, when its name has embedded spaces?

  - by fred.bear

  I understand that it may be a rare situation for an executable to have spaces in it, but it could happen. An example may be the best explanation.. Using standard tools, I want to determine the location (on the file system) of the executable which owns(?) the current window... get the current window ID ...(xdotool getactivewindow ) use the ID to get the PID ...(wmctrl -p -l | sed ... ID .... use the PID to get the executable's name ... (ps -A ... here is where I run into problems ! Whith ps, when listing only the executable's name (-o ucmd), it truncates the name to 15 characters, so this rules out this option for any name which is longer. Widening the column (-o ucmd:99 ) makes no difference.. If pgrep is anything to go by, its matching is limited to 15 because of stat (see: info pgrep).. Listings in variants of "full" mode (eg -A w w) are not useful when the name concerned has spaces in it, because this name is separated from its args by another space!.. Also, in "full" mode, if the process was started by a link, the name of the link is shown, rather than the executable's name. Is there some way to do this (using standard tools)? ...or are spaces a show stopper here?

  Read the article

• Linux Mint on VirtualBox has no internet connection

  - by Martin

  Physical machine: Mac Mini running OSX 10.7.5 Virtual machine: Linux Mint 15 Cinnamon 64-bit Using VirtualBox. I am trying to make the linux connect to the internet. For some reason I can access the host computer with 192.168.2.100. Its set up to show me a web-page that says "It works". This I can see from the linux. But I cannot reach anything on the internet. Either FireFox says "Unable to connect" or when I run nslookup google.com I get connection timed out; no servers could be reached. My setting on VirtualBox under the Network tab are: Bridge Adapter vnic0 promiscouos Mode:Allow All`. If it makes a difference, the host has a WiFi connection to the home router. What have I missed?

  Read the article

• Exchange Server 2003 Drive Error

  - by Saif Khan

  My exchange box went offline this AM. The logs show The device, \Device\Harddisk1, has a bad block. I tried running chkdsk D: /x /r but that didn't help either. I went to the Exchange Manager and tried to move the .stm file from D: to C: but got Exchange System Manager The database files in this store are corrupted. ID no: c104173b Exchange System Manager What else is there to try just to get this online for a few hours until I can get onsite to change the drive. This is a Windows Server 2003 server.

  Read the article

• Is there a way to sharpen low quality images

  - by Saif Bechan

  I have a lot of images for a project that are not really sharp and crisp. I think these were old images that were resized a lot etc. This is because I am working on a website for a client and she does not have the high quality pictures anymore, the pictures I have to work with are somewhat pixelated. Ill show you an example of one I think could be better: Now as you can see the parts around the text 'Azule' is not so sharp. Is there a way to sharpen this. Now I have another one, and I think there is no hope for this one. Is there any hope for the picture above to make it sharp again, I highly doubt it.

  Read the article

• how to set up domain name, bad request invalid hostname

  - by user45645

  assume i have a domain name which will be forwarded to my public ip (web server) automatically. in IIS 6, ip is public ip port is 6666, advanced - host value is www.hello.com firewall is open for 6666(web server port) and 53(DNS port), DMZ of router is my physical address in DNS, i have already had a zone called oldhello.com. And i expect a new domain name. So i have addded a new zone called hello.com and checked SOA server (P) is one.hello.local. then added a new host called one, full name is one.hello.com, ip address 192.168.7.3(my address in router) and then add a alias(CNAME) www, full name is www.hello.com, FQDN i choose the host i added before (one.hello.com) i expected that when i type the public ip in browser, can it be changed to domain name automatically. if not set host value www.hello.com, use public ip i can see the web however, after set up host value www.hello.com, browser show bad request invalid hostname

  Read the article

• Cannot start IIS on XP64 Professional

  - by headsling

  I have enabled the iis components for the first time on this machine, from control panel-add software-windows components, and rebooted. When I attempt to start the "Default Web Site" (which shows as 'Default Web Site (Stopped)' ) from inetmgr nothing happens.. no errors, nothing in the event log. Regmon and Filemon show no obvious errors. I've confirmed that nothing is running on port 80 and have tried changing the local port (8080, 8081 etc.,) with no effect. Further info -- I have removed the install, rebooted, added it back in, rebooted ... still not working. I have visual studio 2008, SQLServer 2008 installed.

  Read the article

• Printing Off Center or Images Offset After Upgrade to 14.04 LTS (Brother HL-2240)

  - by fortitude

  :) I have a very frustrating problem with my Brother HL-2240 under Ubuntu 14.04. Bear in mind this was working perfectly under Ubuntu 13.10. In Firefox, when I print a webpage, all of the images are off center and cut off, this is a big deal for my work. In Google Chrome, when I print a webpage, the page is off center, toward the right margin. In Opera, when I print a webpage, all of the white areas within the margins are black, using a lot of toner. PDF opened in document viewer, prints off center. Steps I have taken to troubleshoot: 1) Playing with the printer settings, resetting to defaults, etc. 2) Un-installing the Brother driver and re-installing (linux-brprinter-installer-2.0.0-1 from the Brother website), which works perfectly in Ubuntu 13.10. I see a similar, un-answered question, here. Hopefully this question provides some additional clarity to the matter. If anyone would like some additional detail because she or he is willing to help, please let me know. I can scan output from the printer to show you. Thank you.

  Read the article

• Chrome shows page shifted left

  - by davidsinjaya

  Courtesy of goal.com Check the pointer that I drew. It doesn't point the right arrow (-), however, it looks like hover on that arrow (arrow turns into green color). Moreover, when I press at that area, it will be directed to link that is specified by that button. Another bug is on the scroll bar. The display show the scroll bar is shifted left, so there is a gap. However, the area that can be clicked remain at the right end of the page.

  Read the article

• Oracle College Rehire Program -China by Camilla!!

  - by Nadiya

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 In China,for the R&D campus hire, we launched a Oracle College Hire Program, all the new graduates in R&D team could join it, the purpose is to let them understand Oracle’s culture and value, get them quickly to be familiar and productive on their new work, provide meaningful events and get them engaged.  They’re divided into classes by location, each class would have around 20 people, and each class would have a monitor, who is in charge of the whole class activity, the program has 3 modules, including social activity, Speaker Series and Career Development. The pictures show one class, which is having the social activity session,exciting isnt it?   /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• SD Card only mounted after a reboot

  - by evothur

  Hi everyone. I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

  Read the article

• Distributing a Python Software for Linux [closed]

  - by zfranciscus

  Hi, I am writing my first software in Python for Ubuntu (or Debian based Linux). I am looking for a good advise on the best way to distribute my software. The easist alternative that I can think of at the moment is to archive the python code into *.tar.gz, and let user execute the main python script as an executable to run the software. I realize that this may not be the best approach. I looked at the Debian maintainer guide: "http://www.debian.org/doc/maint-guide/ch-dother.en.html", not too sound lazy, but the guide looks very intimidating for a beginner. Are there any other tutorial that show how to create a debian package for a beginner ? If anyone has a suggestion do let me know. Thanks ^_^

  Read the article

• Help w/ iPad 1 performance for tile-based DOM Javascript game

  - by butr0s

  I've made a 2D tile-based game with DOM/Javascript. For each level, the map data is loaded and parsed, then lots of tiles ( elements) are drawn onto a larger "map" element. The map is inside of a container that hides overflow, so I can move the map element around by positioning it absolutely. Works a treat on desktop browsers, and my iPad 2. My problem is that performance is really bad on iPad 1. The performance hit is directly related to all the tile elements in my map, because when I remove or reduce the number of tiles drawn, performance improves. Optimizing my collision detection loop has no effect. My first thought was to batch groups of tiles into containers, then hide/show them based on proximity to the player, however this still causes a huge hiccup when the player moves and a new group of tiles is displayed (offscreen). Actually removing the out-of-sight elements from the DOM, then re-adding them as necessary is no faster. Anyone know of any tips that might speed up DOM performance here? My map is 1920 x 1920 pixels, so as far as I know should be within the WebKit texture limit on iOS 5/iPad. The map is being moved with CSS3 transforms, and I've picked all the other obvious low-hanging fruit.

  Read the article

< Previous Page | 497 498 499 500 501 502 503 504 505 506 507 508  | Next Page >