Search Results

Search found 12546 results on 502 pages for 'aidan host'.

Page 502/502 | < Previous Page | 498 499 500 501 502 

• Routing a PPTP client and VMware Server instance running on the same box

  - by servermanfail

  I have a Windows 2003 SBS box. It has 2 physical NIC's: WAN and LAN. The WAN is a public IP. The LAN is a simple 192.168.2.x subnet with Microsoft DHCP Server. Microsoft Routing and Remote Access Service is used to provide NAT to LAN. The box also runs VMware Server with a virtual machine running Windows XP. I want people to be able to VPN into the box, and connect to these virtual machines on the MSRDP port. I can VPN (PPTP) into the 2003 SBS box fine, as well as ping other machines on the LAN. I can ping the VM from a physical workstation on the LAN and vice-versa. I can ping the VPN client from the a physical workstation on the LAN and vice-versa. I can ping the VPN client from the Server console and vice-versa. I can ping the VM client from the Server console and vice-versa. But I cannot ping the VPN client from the VM and vice-versa. I was hoping to set up 2 or 3 Windows XP virtual machines on our only server, so that a couple of people can remote in to work without having to leave a physical machine on in the office. You could this attempted set up a "poor mans terminal server". On the 2003 SBS Server:- C:\Documents and Settings\Administrator>route print IPv4 Route Table =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 50 56 c0 00 08 ...... VMware Virtual Ethernet Adapter for VMnet8 0x3 ...00 50 56 c0 00 01 ...... VMware Virtual Ethernet Adapter for VMnet1 0x10004 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface 0x10005 ...00 11 43 d4 69 13 ...... Broadcom NetXtreme Gigabit Ethernet 0x10006 ...00 11 43 d4 69 14 ...... Broadcom NetXtreme Gigabit Ethernet #2 =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 81.123.144.22 81.123.144.21 1 81.123.144.20 255.255.255.252 81.123.144.21 81.123.144.21 1 81.123.144.21 255.255.255.255 127.0.0.1 127.0.0.1 1 81.255.255.255 255.255.255.255 81.123.144.21 81.123.144.21 1 86.135.78.235 255.255.255.255 81.123.144.22 81.123.144.21 1 109.152.62.236 255.255.255.255 81.123.144.22 81.123.144.21 1 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.2.0 255.255.255.0 192.168.2.3 192.168.2.3 1 192.168.2.3 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.2.26 255.255.255.255 192.168.2.32 192.168.2.32 1 192.168.2.28 255.255.255.255 192.168.2.32 192.168.2.32 1 192.168.2.32 255.255.255.255 127.0.0.1 127.0.0.1 50 192.168.2.50 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.2.255 255.255.255.255 192.168.2.3 192.168.2.3 1 192.168.10.0 255.255.255.0 192.168.10.1 192.168.10.1 20 192.168.10.1 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.10.255 255.255.255.255 192.168.10.1 192.168.10.1 20 192.168.96.0 255.255.255.0 192.168.96.1 192.168.96.1 20 192.168.96.1 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.96.255 255.255.255.255 192.168.96.1 192.168.96.1 20 224.0.0.0 240.0.0.0 81.123.144.21 81.123.144.21 1 224.0.0.0 240.0.0.0 192.168.2.3 192.168.2.3 1 224.0.0.0 240.0.0.0 192.168.10.1 192.168.10.1 20 224.0.0.0 240.0.0.0 192.168.96.1 192.168.96.1 20 255.255.255.255 255.255.255.255 81.123.144.21 81.123.144.21 1 255.255.255.255 255.255.255.255 192.168.2.3 192.168.2.3 1 255.255.255.255 255.255.255.255 192.168.10.1 192.168.10.1 1 255.255.255.255 255.255.255.255 192.168.96.1 192.168.96.1 1 Default Gateway: 81.123.144.22 =========================================================================== Persistent Routes: None C:\Documents and Settings\Administrator>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : 2003server Primary Dns Suffix . . . . . . . : mycompany.local Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : Yes WINS Proxy Enabled. . . . . . . . : Yes DNS Suffix Search List. . . . . . : mycompany.local gateway.2wire.net Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet 8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.10.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet 1 Physical Address. . . . . . . . . : 00-50-56-C0-00-01 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.96.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : PPP adapter RAS Server (Dial In) Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface Physical Address. . . . . . . . . : 00-53-45-00-00-00 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.2.32 Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : NetBIOS over Tcpip. . . . . . . . : Disabled Ethernet adapter LAN: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet Physical Address. . . . . . . . . : 00-11-43-D4-69-13 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.2.50 Subnet Mask . . . . . . . . . . . : 255.255.255.0 IP Address. . . . . . . . . . . . : 192.168.2.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.2.3 Primary WINS Server . . . . . . . : 192.168.2.3 Ethernet adapter WAN: Connection-specific DNS Suffix . : gateway.2wire.net Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2 Physical Address. . . . . . . . . : 00-11-43-D4-69-14 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 81.123.144.21 Subnet Mask . . . . . . . . . . . : 255.255.255.252 Default Gateway . . . . . . . . . : 81.123.144.22 DHCP Server . . . . . . . . . . . : 10.0.0.1 DNS Servers . . . . . . . . . . . : 10.0.0.1 Primary WINS Server . . . . . . . : 192.168.2.3 NetBIOS over Tcpip. . . . . . . . : Disabled Lease Obtained. . . . . . . . . . : 25 February 2011 22:56:59 Lease Expires . . . . . . . . . . : 25 February 2011 23:06:59 C:\Documents and Settings\Administrator>ping 192.168.2.11 Pinging 192.168.2.11 with 32 bytes of data: Reply from 192.168.2.11: bytes=32 time<1ms TTL=128 Reply from 192.168.2.11: bytes=32 time<1ms TTL=128 Reply from 192.168.2.11: bytes=32 time<1ms TTL=128 Reply from 192.168.2.11: bytes=32 time<1ms TTL=128

  Read the article

• Wired connection periodically disconnects requires ipconfig /release and /renew to reconnect

  - by Sesame

  I just got back into University and after a day of using the internet I suddenly was unable to visit other webpages even though I was still able to chat. I restarted the computer and the internet could no longer visit webpages at all. I got a DNS error from the browser (chrome) and the troubleshooter. The connection comes up as "Network 3" even though It was "Network 2" when it worked. I compared ipconfig /all logs and they seemed identical when it was and was not working. I've found two ways to get internet connection (they no longer work): run ipconfig /release and ipconfig /renew several times set a random address and have the troubleshooter fix the new found dhcp problem (before it says dns cannot fix). I checked and it said DHCP was enabled. But either step one or two usually needs to be repeated several times before the network will change back to "network 2" from the defunct "network 3" and after an hour or so I have problems again. I've tried: Uninstalling windows defender and turning off firewall (windows firewall). Updating Qualcomm Ethernet driver - it is up to date. System Restore (problem resurfaces quickly...it's possible this has something to do with windows update?) Flushing dns and setting dns myself (google one and others). Booting in safe mode with networking...didn't fix anything Reinstalling Ethernet Driver Using other ethernet cable, other wall port. I'm out of ideas. Ipconfig /all: Windows IP Configuration Host Name . . . . . . . . . . . . : NGoller Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : Home Ethernet adapter UConnect: Connection-specific DNS Suffix . : Home Description . . . . . . . . . . . : Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller Physical Address. . . . . . . . . : 90-2B-34-50-33-F4 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : fd00::2086:628:f0a1:73c3(Preferred) Temporary IPv6 Address. . . . . . : fd00::c86b:370:b1d9:bd73(Preferred) Link-local IPv6 Address . . . . . : fe80::2086:628:f0a1:73c3%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.33(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Wednesday, August 28, 2013 11:58:37 PM Lease Expires . . . . . . . . . . : Thursday, August 29, 2013 11:58:37 PM Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter isatap.Home: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Home Description . . . . . . . . . . . : Microsoft ISATAP Adapter Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes I'm getting these errors commonly: The IP address lease 155.97.227.199 for the Network Card with network address 0x902B345033F4 has been denied by the DHCP server 10.0.1.1 (The DHCP Server sent a DHCPNACK message). Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. By the way, Operating System: Windows 7 - 64 Bit. Have downloaded latest windows updates. Update: And my two fixes don't work any more :( . This is now what happens when I try to Ipconfig /renew: C:\Users\Nikko\Desktop>ipconfig /renew Windows IP Configuration An error occurred while renewing interface Local Area Connection : The name spec ified in the network control block (NCB) is in use on a remote adapter. The NCB is the data. An error occurred while releasing interface Loopback Pseudo-Interface 1 : The sy stem cannot find the file specified. Update 2: So my internet is randomly working again today. The IP address I had before was a local one while the university address should start with 155... I didn't do anything to the settings...it's bizarre that it all of a sudden works. Thanks!

  Read the article

• Data Modeling: Logical Modeling Exercise

  - by swisscheese

  In trying to learn the art of data storage I have been trying to take in as much solid information as possible. PerformanceDBA posted some really helpful tutorials/examples in the following posts among others: is my data normalized? and Relational table naming convention. I already asked a subset question of this model here. So to make sure I understood the concepts he presented and I have seen elsewhere I wanted to take things a step or two further and see if I am grasping the concepts. Hence the purpose of this post, which hopefully others can also learn from. Everything I present is conceptual to me and for learning rather than applying it in some production system. It would be cool to get some input from PerformanceDBA also since I used his models to get started, but I appreciate all input given from anyone. As I am new to databases and especially modeling I will be the first to admit that I may not always ask the right questions, explain my thoughts clearly, or use the right verbage due to lack of expertise on the subject. So please keep that in mind and feel free to steer me in the right direction if I head off track. If there is enough interest in this I would like to take this from the logical to physical phases to show the evolution of the process and share it here on Stack. I will keep this thread for the Logical Diagram though and start new one for the additional steps. For my understanding I will be building a MySQL DB in the end to run some tests and see if what I came up with actually works. Here is the list of things that I want to capture in this conceptual model. Edit for V1.2 The purpose of this is to list Bands, their members, and the Events that they will be appearing at, as well as offer music and other merchandise for sale Members will be able to match up with friends Members can write reviews on the Bands, their music, and their events. There can only be one review per member on a given item, although they can edit their reviews and history will be maintained. BandMembers will have the chance to write a single Comment on Reviews about the Band they are associated with. Collectively as a Band only one Comment is allowed per Review. Members can then rate all Reviews and Comments but only once per given instance Members can select their favorite Bands, music, Merchandise, and Events Bands, Songs, and Events will be categorized into the type of Genre that they are and then further subcategorized into a SubGenre if necessary. It is ok for a Band or Event to fall into more then one Genre/SubGenre combination. Event date, time, and location will be posted for a given band and members can show that they will be attending the Event. An Event can be comprised of more than one Band, and multiple Events can take place at a single location on the same day Every party will be tied to at least one address and address history shall be maintained. Each party could also be tied to more then one address at a time (i.e. billing, shipping, physical) There will be stored profiles for Bands, BandMembers, and general members. So there it is, maybe a bit involved but could be a great learning tool for many hopefully as the process evolves and input is given by the community. Any input? EDIT v1.1 In response to PerformanceDBA U.3) That means no merchandise other than Band merchandise in the database. Correct ? That was my original thought but you got me thinking. Maybe the site would want to sell its own merchandise or even other merchandise from the bands. Not sure a mod to make for that. Would it require an entire rework of the Catalog section or just the identifying relationship that exists with the Band? Attempted a mod to sell both complete albums or song. Either way they would both be in electronic format only available for download. That is why I listed an Album as being comprised of Songs rather then 2 separate entities. U.5) I understand what you bring up about the circular relation with Favorite. I would like to get to this “It is either one Entity with some form of differentiation (FavoriteType) which identifies its treatment” but how to is not clear to me. What am I missing here? u.6) “Business Rules This is probably the only area you are weak in.” Thanks for the honest response. I will readdress these but I hope to clear up some confusion in my head first with the responses I have posted back to you. Q.1) Yes I would like to have Accepted, Rejected, and Blocked. I am not sure what you are referring to as to how this would change the logical model? Q.2) A person does not have to be a User. They can exist only as a BandMember. Is that what you are asking? Minor Issue Zero, One, or More…Oops I admit I forgot to give this attention when building the model. I am submitting this version as is and will address in a future version. I need to read up more on Constraint Checking to make sure I am understanding things. M.4) Depends if you envision OrderPurchase in the future. Can you expand as to what you mean here? EDIT V1.2 In response to PerformanceDBA input... Lessons learned. I was mixing the concept of Identifying / Non-Identifying and Cardinality (i.e. Genre / SubGenre), and doing so inconsistently to make things worse. Associative Tables are not required in Logical Diagrams as their many-to-many relationships can be depicted and then expanded in the Physical Model. I was overlooking the Cardinality in a lot of the relationships The importance of reading through relationships using effective Verb Phrases to reassure I am modeling what I want to accomplish. U.2) In the concept of this model it is only required to track a Venue as a location for an Event. No further data needs to be collected. With that being said Events will take place on a given EventDate and will be hosted at a Venue. Venues will host multiple events and possibly multiple events on a given date. In my new model my thinking was that EventDate is already tied to Event . Therefore, Venue will not need a relationship with EventDate. The 5th and 6th bullets you have listed under U.2) leave me questioning my thinking though. Am I missing something here? U.3) Is it time to move the link between Item and Band up to Item and Party instead? With the current design I don't see a possibility to sell merchandise not tied to the band as you have brought up. U.5) I left as per your input rather than making it a discrete Supertype/Subtype Relationship as I don’t see a benefit of having that type of roll up. Additional Revisions AR.1) After going through the exercise for FavoriteItem, I feel that Item to Review requires a many-to-many relationship so that is indicated. Necessary? Ok here we go for v1.3 I took a few days on this version, going back and forth with my design. Once the logical process is complete, as I want to see if I am on the right track, I will go through in depth what I had learned and the troubles I faced as a beginner going through this process. The big point for this version was it took throwing in some Keys to help see what I was missing in the past. Going through the process of doing a matrix proved to be of great help also. Regardless of anything, if it wasn't for the input given by PerformanceDBA I would still be a lost soul wondering in the dark. Who knows my current design might reaffirm that I still am, but I have learned a lot so I am know I at least have a flashlight in my hand. At this point in time I admit that I am still confused about identifying and non-identifying relationships. In my model I had to use non-identifying relationships with non nulls just to join the relationships I wanted to model. In reading a lot on the subject there seems to be a lot of disagreement and indecisiveness on the subject so I did what I thought represented the right things in my model. When to force (identifying) and when to be free (non-identifying)? Anyone have inputs? EDIT V1.4 Ok took the V1.3 inputs and cleaned things up for this V1.4 Currently working on a V1.5 to include attributes.

  Read the article

• Configuration Error ASP.NET password format specified is invalid

  - by salvationishere

  I am getting the above error in IIS 6.0 now when I browse my C# / SQL web application. This was built in VS 2008 and SS 2008 on a 32-bit XP OS. The application was working before I added Login controls to it. However, this is my first time configuring Login/password controls so I am probably missing something really basic. This error doesn't happen until I try to login. Here are the details of my error from IIS; I get the same error in VS: Parser Error Message: Password format specified is invalid. Source Error: Line 31: <add Line 32: name="SqlProvider" Line 33: type="System.Web.Security.SqlMembershipProvider" Line 34: connectionStringName="AdventureWorksConnectionString2" Line 35: applicationName="AddFileToSQL2" Source File: C:\Inetpub\AddFileToSQL2\web.config Line: 33 And the relevant contents of my web.config are: <connectionStrings> <add name="Master" connectionString="server=MSSQLSERVER;database=Master; Integrated Security=SSPI" providerName="System.Data.SqlClient" /> <add name="AdventureWorksConnectionString" connectionString="Data Source=SIDEKICK;Initial Catalog=AdventureWorks;Integrated Security=True" providerName="System.Data.SqlClient" /> <add name="AdventureWorksConnectionString2" connectionString="Data Source=SIDEKICK;Initial Catalog=AdventureWorks;Integrated Security=True; " providerName="System.Data.SqlClient" /> </connectionStrings> <system.web> <membership defaultProvider="SqlProvider" userIsOnlineTimeWindow="15"> <providers> <clear /> <add name="SqlProvider" type="System.Web.Security.SqlMembershipProvider" connectionStringName="AdventureWorksConnectionString2" applicationName="AddFileToSQL2" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" requiresUniqueEmail="false" passwordFormat="encrypted" /> </providers> </membership> <!-- Set compilation debug="true" to insert debugging symbols into the compiled page. Because this affects performance, set this value to true only during development. --> <roleManager enabled="true" /> <compilation debug="true"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/> </assemblies> </compilation> <!-- The <authentication> section enables configuration of the security authentication mode used by ASP.NET to identify an incoming user. --> <authentication mode="Forms"> <forms loginUrl="Password.aspx" protection="All" timeout="30" name="SqlAuthCookie" path="/FormsAuth" requireSSL="false" slidingExpiration="true" defaultUrl="default.aspx" cookieless="UseCookies" enableCrossAppRedirects="false" /> </authentication> <!--Authorization permits only authenticated users to access the application --> <authorization> <deny users="?" /> <allow users="*" /> </authorization> <!-- The <customErrors> section enables configuration of what to do if/when an unhandled error occurs during the execution of a request. Specifically, it enables developers to configure html error pages to be displayed in place of a error stack trace. <customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm"> <error statusCode="403" redirect="NoAccess.htm" /> <error statusCode="404" redirect="FileNotFound.htm" /> </customErrors> --> <pages> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </controls> </pages> <httpHandlers> <remove verb="*" path="*.asmx"/> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false"/> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </httpModules> </system.web> <system.codedom> <compilers> <compiler language="c#;cs;csharp" extension=".cs" warningLevel="4" type="Microsoft.CSharp.CSharpCodeProvider, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <providerOption name="CompilerVersion" value="v3.5"/> <providerOption name="WarnAsError" value="false"/> </compiler> </compilers> </system.codedom> <!-- The system.webServer section is required for running ASP.NET AJAX under Internet Information Services 7.0. It is not necessary for previous version of IIS. --> <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <modules> <remove name="ScriptModule"/> <add name="ScriptModule" preCondition="managedHandler" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </modules> <handlers> <remove name="WebServiceHandlerFactory-Integrated"/> <remove name="ScriptHandlerFactory"/> <remove name="ScriptHandlerFactoryAppServices"/> <remove name="ScriptResource"/> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> <add name="ScriptResource" preCondition="integratedMode" verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/> </handlers> </system.webServer> <runtime> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"> <dependentAssembly> <assemblyIdentity name="System.Web.Extensions" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/> </dependentAssembly> <dependentAssembly> <assemblyIdentity name="System.Web.Extensions.Design" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-1.1.0.0" newVersion="3.5.0.0"/> </dependentAssembly> </assemblyBinding> </runtime> <system.net> <mailSettings> <smtp from="[email protected]"> <network host="SIDEKICK" password="" userName="" /> </smtp> </mailSettings> </system.net> </configuration> I checked and I do have an aspnetdb database in my SSMS. The Network Service account has SELECT, EXECUTE, INSERT, UPDATE access to this database. But one problem I see is that all of the tables in this database are empty except for aspnet_SchemaVersions, which just has 2 records (common and membership). Is this right? I added users and roles via ASP.NET Configuration wizard, and I believe I set this up correctly since I followed the Microsoft tutorial at http://msdn.microsoft.com/en-us/library/ms998347.aspx. One other problem I see from VS is after adding content to my Page_Load on my initial login Password.aspx.cs file, I'm getting an invalid cast problem below. I googled this problem also but the solutions I saw confused me even more. The Page_Load section I added is: protected void Page_Load(object sender, EventArgs e) { Response.Write("Hello, " + Server.HtmlEncode(User.Identity.Name)); FormsIdentity id = (FormsIdentity)User.Identity; FormsAuthenticationTicket ticket = id.Ticket; Response.Write("<p/>TicketName: " + ticket.Name); Response.Write("<br/>Cookie Path: " + ticket.CookiePath); Response.Write("<br/>Ticket Expiration: " + ticket.Expiration.ToString()); Response.Write("<br/>Expired: " + ticket.Expired.ToString()); Response.Write("<br/>Persistent: " + ticket.IsPersistent.ToString()); Response.Write("<br/>IssueDate: " + ticket.IssueDate.ToString()); Response.Write("<br/>UserData: " + ticket.UserData); Response.Write("<br/>Version: " + ticket.Version.ToString()); } And the VS exception I'm getting: System.InvalidCastException was unhandled by user code Message="Unable to cast object of type 'System.Security.Principal.GenericIdentity' to type 'System.Web.Security.FormsIdentity'." Source="AddFileToSQL" StackTrace: at AddFileToSQL.Password.Page_Load(Object sender, EventArgs e) in C:\Documents and Settings\Admin\My Documents\Visual Studio 2008\Projects\AddFileToSQL2\AddFileToSQL\Password.aspx.cs:line 22 at System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) at System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) at System.Web.UI.Control.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) InnerException:

  Read the article

• pyqt QObject: Cannot create children for a parent that is in a different thread

  - by memomk

  QObject: Cannot create children for a parent that is in a different thread. (Parent is QTextDocument(0x9919018), parent's thread is QThread(0x97331e0), current thread is flooderthread(0x97b4c10) error means ? am sorry because am new to pyqt here is the code : i know the code is finished yet but it should work i guess the problem is with myfun.log function... #! /usr/bin/python # -*- coding: utf-8 -*- import urllib, urllib2, itertools, threading, cookielib, Cookie, sys, time, hashlib, os from PyQt4 import QtCore, QtGui try: _fromUtf8 = QtCore.QString.fromUtf8 except AttributeError: _fromUtf8 = lambda s: s gui=QtGui.QApplication.processEvents texttoset="" class fun(): global texttoset def checkpassword(self): if ui.passwordcheck.isChecked()==True: return 1 else : return 0 def log(self, text): if text != False: firsttext=str(ui.console.toPlainText()) secondtext=firsttext+text+"\n" ui.console.setText(secondtext) log=open("log.log", "a") log.write(text+"\n") log.close() else : firsttext=str(ui.console.toPlainText()) secondtext=firsttext+texttoset+"\n" ui.console.setText(secondtext) log=open("log.log", "a") log.write(texttoset+"\n") log.close() def disable(self): MainWindow.setEnabled(False) pass def enable(self): MainWindow.setEnabled(True) pass def checkmethod(self): if ui.get.isChecked()==True: return 1 elif ui.post.isChecked()==True: return 2 else : return 0 def main(self): connecter() gui() f1.start() gui() time.sleep(3) gui() f2.start() gui() time.sleep(3) gui() f3.start() gui() time.sleep(3) gui() f4.start() gui() time.sleep(3) gui() f5.start() gui() self.sleep(3) gui() f6.start() gui() def killer(self): f1.terminate() f2.terminate() f3.terminate() f4.terminate() f5.terminate() f6.terminate() def close(self): self.killer() os.abort() sys.exit() myfun=fun() def connecter(): QtCore.QObject.connect(f1, QtCore.SIGNAL("log(bool)"), myfun.log) QtCore.QObject.connect(f1, QtCore.SIGNAL("enable()"), myfun.enable) QtCore.QObject.connect(f1, QtCore.SIGNAL("disable()"), myfun.disable) QtCore.QObject.connect(f2, QtCore.SIGNAL("log(bool)"), myfun.log) QtCore.QObject.connect(f2, QtCore.SIGNAL("enable()"), myfun.enable) QtCore.QObject.connect(f2, QtCore.SIGNAL("disable()"), myfun.disable) QtCore.QObject.connect(f3, QtCore.SIGNAL("log(bool)"), myfun.log) QtCore.QObject.connect(f3, QtCore.SIGNAL("enable()"), myfun.enable) QtCore.QObject.connect(f3, QtCore.SIGNAL("disable()"), myfun.disable) QtCore.QObject.connect(f4, QtCore.SIGNAL("log(bool)"), myfun.log) QtCore.QObject.connect(f4, QtCore.SIGNAL("enable()"), myfun.enable) QtCore.QObject.connect(f4, QtCore.SIGNAL("disable()"), myfun.disable) QtCore.QObject.connect(f5, QtCore.SIGNAL("log(bool)"), myfun.log) QtCore.QObject.connect(f5, QtCore.SIGNAL("enable()"), myfun.enable) QtCore.QObject.connect(f5, QtCore.SIGNAL("disable()"), myfun.disable) QtCore.QObject.connect(f6, QtCore.SIGNAL("log(bool)"), myfun.log) QtCore.QObject.connect(f6, QtCore.SIGNAL("enable()"), myfun.enable) QtCore.QObject.connect(f6, QtCore.SIGNAL("disable()"), myfun.disable) x=0 num=0 class flooderthread(QtCore.QThread): global texttoset def __init__(self, x, num): QtCore.QThread.__init__(self) self.x=x self.num=num def log(self, text): texttolog=str(text) time.sleep(1) self.emit(QtCore.SIGNAL("log(bool)"), False) time.sleep(2) def enable(self): time.sleep(1) self.emit(QtCore.SIGNAL("enable()")) def disable(self): time.sleep(1) self.emit(QtCore.SIGNAL("disable()")) def run(self): connecter() self.log("\n\n--------------------------------------------------new session-------------------------------------\n\n") itered=False gui() self.disable() gui() self.log("setting params...") param={ui.dataname1.text():ui.datavalue1.text(),ui.dataname3.text():ui.datavalue3.text(),ui.dataname3.text():ui.datavalue3.text(), } self.log("checking password...") if myfun.checkpassword()==1: itered=True self.log("password is true") else : self.log("password is null ") self.log("itered operation") self.log("setting url") url=str(ui.url.text()) if url[:4]!="http" and url[:3]!="ftp": self.log("url error exiting the whole function") self.log("please set a valide protocole!!") gui() self.enable() gui() return 1 pass else : self.log("valid url") gui() self.log("url is "+url) self.log("setting proxy") proxy="http://"+ui.proxyuser.text()+":"+ui.proxypass.text()+"@"+ui.proxyhost.text()+":"+ui.proxyport.text() self.log("proxy is "+proxy) gui() self.log("preparing params...") urlparam=urllib.urlencode(param) gui() self.log("params are "+urlparam) self.log("setting up headers...") header={'User-Agent':str(ui.useragent.toPlainText())} self.log("headers are "+ str(header)) self.log("setting up proxy handler..") proxyhandler=urllib2.ProxyHandler({"http":str(proxy)}) self.log("checking method") if myfun.checkmethod()==1: self.log("method is get..") self.log("setting request..") finalurl=url+urlparam gui() self.log("final url is"+finalurl) req=urllib2.Request(finalurl, None, headers) elif myfun.checkmethod()==2: self.log("method is post...") self.log("setting request..") finalurl=url gui() self.log("final url is "+finalurl) req=urllib2.Request(finalurl, urlparam, header) else : self.log("error has been accourded") self.log("please select a method!!") gui() self.log("exiting the whole functions") gui() self.enable() return 1 pass self.log("intilizing cookies..") c1=Cookie.SimpleCookie() c1[str(ui.cookiename1.text())]=str(ui.cookievalue1.text()) c1[str(ui.cookiename1.text())]['path']='/' c1[str(ui.cookiename2.text())]=str(ui.cookievalue2.text()) c1[str(ui.cookiename2.text())]['path']='/' c1[str(ui.cookiename3.text())]=str(ui.cookievalue3.text()) c1[str(ui.cookiename3.text())]['domain']=url c1[str(ui.cookiename3.text())]['path']='/' c1[str(ui.cookiename4.text())]=str(ui.cookievalue4.text()) c1[str(ui.cookiename4.text())]['domain']=url c1[str(ui.cookiename4.text())]['path']='/' self.log("cookies are.. :"+str(c1)) cj=cookielib.CookieJar() cj.set_cookie(c1) opener = urllib2.build_opener(proxyhandler, urllib2.HTTPCookieProcessor(cj)) self.log("insatlling opener") urllib2.install_opener(opener) self.log("setting the two operations....") if itered==Fasle: self.log("starting the flooding loop") gui() while true: try: gui() opener.open(req) except e: self.log("error connecting : "+e.reason) self.log("will continue....") continue gui() elif itered==True: pass f1=flooderthread(1, 1) f2=flooderthread(2, 2) f3=flooderthread(3, 3) f4=flooderthread(4, 4) f5=flooderthread(5, 5) f6=flooderthread(6, 6) class Ui_MainWindow(object): def setupUi(self, MainWindow): MainWindow.setObjectName(_fromUtf8("MainWindow")) MainWindow.setMinimumSize(QtCore.QSize(838, 500)) MainWindow.setMaximumSize(QtCore.QSize(838, 500)) MainWindow.setWindowTitle(QtGui.QApplication.translate("MainWindow", "memo flooder", None, QtGui.QApplication.UnicodeUTF8)) self.centralwidget = QtGui.QWidget(MainWindow) self.centralwidget.setObjectName(_fromUtf8("centralwidget")) self.console=QtGui.QTextEdit(self.centralwidget) self.console.setGeometry(10, 350, 800,130) self.console.setReadOnly(True) self.console.setObjectName("console") self.groupBox = QtGui.QGroupBox(self.centralwidget) self.groupBox.setGeometry(QtCore.QRect(30, 50, 71, 80)) self.groupBox.setTitle(QtGui.QApplication.translate("MainWindow", "method:", None, QtGui.QApplication.UnicodeUTF8)) self.groupBox.setObjectName(_fromUtf8("groupBox")) self.post = QtGui.QRadioButton(self.groupBox) self.post.setGeometry(QtCore.QRect(10, 20, 61, 22)) self.post.setText(QtGui.QApplication.translate("MainWindow", "post", None, QtGui.QApplication.UnicodeUTF8)) self.post.setChecked(True) self.post.setObjectName(_fromUtf8("post")) self.get = QtGui.QRadioButton(self.groupBox) self.get.setGeometry(QtCore.QRect(10, 50, 51, 22)) self.get.setText(QtGui.QApplication.translate("MainWindow", "get", None, QtGui.QApplication.UnicodeUTF8)) self.get.setObjectName(_fromUtf8("get")) self.url = QtGui.QLineEdit(self.centralwidget) self.url.setGeometry(QtCore.QRect(70, 20, 671, 27)) self.url.setInputMethodHints(QtCore.Qt.ImhUrlCharactersOnly) self.url.setObjectName(_fromUtf8("url")) self.groupBox_2 = QtGui.QGroupBox(self.centralwidget) self.groupBox_2.setGeometry(QtCore.QRect(110, 50, 371, 111)) self.groupBox_2.setTitle(QtGui.QApplication.translate("MainWindow", "data:", None, QtGui.QApplication.UnicodeUTF8)) self.groupBox_2.setObjectName(_fromUtf8("groupBox_2")) self.dataname1 = QtGui.QLineEdit(self.groupBox_2) self.dataname1.setGeometry(QtCore.QRect(20, 30, 101, 27)) self.dataname1.setObjectName(_fromUtf8("dataname1")) self.label = QtGui.QLabel(self.groupBox_2) self.label.setGeometry(QtCore.QRect(40, 10, 67, 17)) self.label.setText(QtGui.QApplication.translate("MainWindow", "name:", None, QtGui.QApplication.UnicodeUTF8)) self.label.setObjectName(_fromUtf8("label")) self.dataname2 = QtGui.QLineEdit(self.groupBox_2) self.dataname2.setGeometry(QtCore.QRect(130, 30, 113, 27)) self.dataname2.setObjectName(_fromUtf8("dataname2")) self.dataname3 = QtGui.QLineEdit(self.groupBox_2) self.dataname3.setGeometry(QtCore.QRect(250, 30, 113, 27)) self.dataname3.setObjectName(_fromUtf8("dataname3")) self.label_2 = QtGui.QLabel(self.groupBox_2) self.label_2.setGeometry(QtCore.QRect(40, 60, 67, 17)) self.label_2.setText(QtGui.QApplication.translate("MainWindow", "value:", None, QtGui.QApplication.UnicodeUTF8)) self.label_2.setObjectName(_fromUtf8("label_2")) self.datavalue1 = QtGui.QLineEdit(self.groupBox_2) self.datavalue1.setGeometry(QtCore.QRect(20, 80, 101, 27)) self.datavalue1.setObjectName(_fromUtf8("datavalue1")) self.datavalue2 = QtGui.QLineEdit(self.groupBox_2) self.datavalue2.setGeometry(QtCore.QRect(130, 80, 113, 27)) self.datavalue2.setObjectName(_fromUtf8("datavalue2")) self.datavalue3 = QtGui.QLineEdit(self.groupBox_2) self.datavalue3.setGeometry(QtCore.QRect(250, 80, 113, 27)) self.datavalue3.setObjectName(_fromUtf8("datavalue3")) self.groupBox_4 = QtGui.QGroupBox(self.centralwidget) self.groupBox_4.setGeometry(QtCore.QRect(670, 50, 151, 111)) self.groupBox_4.setTitle(QtGui.QApplication.translate("MainWindow", "password:", None, QtGui.QApplication.UnicodeUTF8)) self.groupBox_4.setObjectName(_fromUtf8("groupBox_4")) self.passname = QtGui.QLineEdit(self.groupBox_4) self.passname.setGeometry(QtCore.QRect(10, 30, 113, 27)) self.passname.setObjectName(_fromUtf8("passname")) self.passvalue = QtGui.QLineEdit(self.groupBox_4) self.passvalue.setGeometry(QtCore.QRect(10, 80, 113, 27)) self.passvalue.setObjectName(_fromUtf8("passvalue")) self.passwordcheck = QtGui.QCheckBox(self.centralwidget) self.passwordcheck.setGeometry(QtCore.QRect(670, 180, 97, 22)) self.passwordcheck.setText(QtGui.QApplication.translate("MainWindow", "password", None, QtGui.QApplication.UnicodeUTF8)) self.passwordcheck.setChecked(True) self.passwordcheck.setObjectName(_fromUtf8("passwordcheck")) self.groupBox_5 = QtGui.QGroupBox(self.centralwidget) self.groupBox_5.setGeometry(QtCore.QRect(29, 169, 441, 81)) self.groupBox_5.setTitle(QtGui.QApplication.translate("MainWindow", "proxy:", None, QtGui.QApplication.UnicodeUTF8)) self.groupBox_5.setObjectName(_fromUtf8("groupBox_5")) self.proxyhost = QtGui.QLineEdit(self.groupBox_5) self.proxyhost.setGeometry(QtCore.QRect(20, 30, 113, 27)) self.proxyhost.setObjectName(_fromUtf8("proxyhost")) self.proxyport = QtGui.QLineEdit(self.groupBox_5) self.proxyport.setGeometry(QtCore.QRect(140, 30, 51, 27)) self.proxyport.setInputMethodHints(QtCore.Qt.ImhDigitsOnly|QtCore.Qt.ImhPreferNumbers) self.proxyport.setObjectName(_fromUtf8("proxyport")) self.proxyuser = QtGui.QLineEdit(self.groupBox_5) self.proxyuser.setGeometry(QtCore.QRect(200, 30, 113, 27)) self.proxyuser.setObjectName(_fromUtf8("proxyuser")) self.proxypass = QtGui.QLineEdit(self.groupBox_5) self.proxypass.setGeometry(QtCore.QRect(320, 30, 113, 27)) self.proxypass.setObjectName(_fromUtf8("proxypass")) self.label_4 = QtGui.QLabel(self.groupBox_5) self.label_4.setGeometry(QtCore.QRect(100, 10, 67, 17)) self.label_4.setText(QtGui.QApplication.translate("MainWindow", "host", None, QtGui.QApplication.UnicodeUTF8)) self.label_4.setObjectName(_fromUtf8("label_4")) self.label_5 = QtGui.QLabel(self.groupBox_5) self.label_5.setGeometry(QtCore.QRect(150, 10, 67, 17)) self.label_5.setText(QtGui.QApplication.translate("MainWindow", "port", None, QtGui.QApplication.UnicodeUTF8)) self.label_5.setObjectName(_fromUtf8("label_5")) self.label_6 = QtGui.QLabel(self.groupBox_5) self.label_6.setGeometry(QtCore.QRect(200, 10, 67, 17)) self.label_6.setText(QtGui.QApplication.translate("MainWindow", "username", None, QtGui.QApplication.UnicodeUTF8)) self.label_6.setObjectName(_fromUtf8("label_6")) self.label_7 = QtGui.QLabel(self.groupBox_5) self.label_7.setGeometry(QtCore.QRect(320, 10, 67, 17)) self.label_7.setText(QtGui.QApplication.translate("MainWindow", "password", None, QtGui.QApplication.UnicodeUTF8)) self.label_7.setObjectName(_fromUtf8("label_7")) self.groupBox_6 = QtGui.QGroupBox(self.centralwidget) self.groupBox_6.setGeometry(QtCore.QRect(30, 260, 531, 91)) self.groupBox_6.setTitle(QtGui.QApplication.translate("MainWindow", "cookies:", None, QtGui.QApplication.UnicodeUTF8)) self.groupBox_6.setObjectName(_fromUtf8("groupBox_6")) self.cookiename1 = QtGui.QLineEdit(self.groupBox_6) self.cookiename1.setGeometry(QtCore.QRect(10, 20, 113, 27)) self.cookiename1.setObjectName(_fromUtf8("cookiename1")) self.cookiename2 = QtGui.QLineEdit(self.groupBox_6) self.cookiename2.setGeometry(QtCore.QRect(140, 20, 113, 27)) self.cookiename2.setObjectName(_fromUtf8("cookename2")) self.cookiename3 = QtGui.QLineEdit(self.groupBox_6) self.cookiename3.setGeometry(QtCore.QRect(270, 20, 113, 27)) self.cookiename3.setObjectName(_fromUtf8("cookiename3")) self.cookiename4 = QtGui.QLineEdit(self.groupBox_6) self.cookiename4.setGeometry(QtCore.QRect(390, 20, 113, 27)) self.cookiename4.setObjectName(_fromUtf8("cookiename4")) self.cookievalue1 = QtGui.QLineEdit(self.groupBox_6) self.cookievalue1.setGeometry(QtCore.QRect(10, 50, 113, 27)) self.cookievalue1.setObjectName(_fromUtf8("cookievalue1")) self.cookievalue2 = QtGui.QLineEdit(self.groupBox_6) self.cookievalue2.setGeometry(QtCore.QRect(140, 50, 113, 27)) self.cookievalue2.setObjectName(_fromUtf8("cookievalue2")) self.cookievalue3 = QtGui.QLineEdit(self.groupBox_6) self.cookievalue3.setGeometry(QtCore.QRect(270, 50, 113, 27)) self.cookievalue3.setObjectName(_fromUtf8("cookievalue3")) self.cookievalue4 = QtGui.QLineEdit(self.groupBox_6) self.cookievalue4.setGeometry(QtCore.QRect(390, 50, 113, 27)) self.cookievalue4.setObjectName(_fromUtf8("cookievalue4")) self.groupBox_7 = QtGui.QGroupBox(self.centralwidget) self.groupBox_7.setGeometry(QtCore.QRect(570, 260, 251, 80)) self.groupBox_7.setTitle(QtGui.QApplication.translate("MainWindow", "useragents:", None, QtGui.QApplication.UnicodeUTF8)) self.groupBox_7.setObjectName(_fromUtf8("groupBox_7")) self.useragent = QtGui.QTextEdit(self.groupBox_7) self.useragent.setGeometry(QtCore.QRect(10, 20, 211, 51)) self.useragent.setVerticalScrollBarPolicy(QtCore.Qt.ScrollBarAlwaysOn) self.useragent.setObjectName(_fromUtf8("useragent")) self.start = QtGui.QPushButton(self.centralwidget) self.start.setGeometry(QtCore.QRect(750, 20, 71, 27)) self.start.setText(QtGui.QApplication.translate("MainWindow", "start", None, QtGui.QApplication.UnicodeUTF8)) self.start.setObjectName(_fromUtf8("start")) self.label_3 = QtGui.QLabel(self.centralwidget) self.label_3.setGeometry(QtCore.QRect(30, 20, 67, 17)) self.label_3.setText(QtGui.QApplication.translate("MainWindow", "url :", None, QtGui.QApplication.UnicodeUTF8)) self.label_3.setObjectName(_fromUtf8("label_3")) MainWindow.setCentralWidget(self.centralwidget) QtCore.QObject.connect(self.start, QtCore.SIGNAL(_fromUtf8("clicked(bool)")), myfun.main) QtCore.QObject.connect(self.passwordcheck, QtCore.SIGNAL(_fromUtf8("clicked(bool)")), self.groupBox_4.setEnabled) QtCore.QMetaObject.connectSlotsByName(MainWindow) def __del__(): myfun.killer() os.abort() sys.exit() app = QtGui.QApplication(sys.argv) MainWindow = QtGui.QMainWindow() ui = Ui_MainWindow() ui.setupUi(MainWindow) myfun.log("\n\n--------------------------------------------------new session-------------------------------------\n\n") MainWindow.show() sys.exit(app.exec_())

  Read the article

• Xapian gem failed to install on Mac OS X Snow Leopard + macports

  - by goodwill

  I have installed xapian-core + xapian-bindings with macports on snow leopard, then trying to install xapian gem fails: Building native extensions. This could take a while... ERROR: Error installing xapian: ERROR: Failed to build gem native extension. /opt/ruby-enterprise/bin/ruby extconf.rb ./configure --with-ruby checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... ./install-sh -c -d checking for gawk... no checking for mawk... no checking for nawk... no checking for awk... awk checking whether make sets $(MAKE)... yes checking how to create a ustar tar archive... gnutar checking build system type... i386-apple-darwin10.3.0 checking host system type... i386-apple-darwin10.3.0 checking for style of include used by make... GNU checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking dependency style of gcc... gcc3 checking for a sed that does not truncate output... /usr/bin/sed checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ld used by gcc... /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld checking if the linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) is GNU ld... no checking for /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking the maximum length of command line arguments... 196608 checking command to parse /usr/bin/nm output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking for dsymutil... dsymutil checking for nmedit... nmedit checking for -single_module linker flag... yes checking for -exported_symbols_list linker flag... yes checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fno-common checking if gcc PIC flag -fno-common works... yes checking if gcc static flag -static works... no checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld) supports shared libraries... yes checking dynamic linker characteristics... darwin10.3.0 dyld checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no checking whether we are using the GNU C++ compiler... (cached) yes checking whether g++ accepts -g... (cached) yes checking dependency style of g++... (cached) gcc3 checking for xapian-config... /opt/local/bin/xapian-config checking /opt/local/bin/xapian-config works... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for ruby1.8... no checking for ruby... /opt/ruby-enterprise/bin/ruby checking /opt/ruby-enterprise/bin/ruby version... ruby 1.8.7 (2009-06-12 patchlevel 174) [i686-darwin10.2.0], MBARI 0x6770, Ruby Enterprise Edition 2009.10 checking for /opt/ruby-enterprise/lib/ruby/1.8/i686-darwin10.2.0/ruby.h... yes checking ruby/io.h... no checking whether to use -fvisibility=hidden... yes configure: creating ./config.status config.status: creating Makefile config.status: creating xapian-version.h config.status: creating python/Makefile config.status: creating python/docs/Makefile config.status: creating php/Makefile config.status: creating php/docs/Makefile config.status: creating java/Makefile config.status: creating java/native/Makefile config.status: creating java/org/xapian/Makefile config.status: creating java/org/xapian/errors/Makefile config.status: creating java/org/xapian/examples/Makefile config.status: creating java-swig/Makefile config.status: creating tcl8/Makefile config.status: creating tcl8/docs/Makefile config.status: creating tcl8/pkgIndex.tcl config.status: creating csharp/Makefile config.status: creating csharp/docs/Makefile config.status: creating csharp/AssemblyInfo.cs config.status: creating ruby/Makefile config.status: creating ruby/docs/Makefile config.status: creating xapian-bindings.spec config.status: creating python/generate-python-exceptions config.status: creating config.h config.status: config.h is unchanged config.status: executing depfiles commands *** Building bindings for languages: ruby make make all-recursive Making all in ruby make all-recursive Making all in docs make all-am make[5]: Nothing to be done for `all-am'. /bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I.. -I/opt/ruby-enterprise/lib/ruby/1.8/i686-darwin10.2.0 -I/opt/ruby-enterprise/lib/ruby/1.8/i686-darwin10.2.0 -fno-strict-aliasing -Wall -Wno-unused -Wno-uninitialized -fvisibility=hidden -I/opt/local/include -g -O2 -MT xapian_wrap.lo -MD -MP -MF .deps/xapian_wrap.Tpo -c -o xapian_wrap.lo xapian_wrap.cc ../libtool: line 393: /bin/sed: No such file or directory ../libtool: line 393: /bin/sed: No such file or directory ../libtool: line 792: /bin/sed: No such file or directory : ignoring unknown tag ../libtool: line 792: /bin/sed: No such file or directory *** Warning: inferring the mode of operation is deprecated. *** Future versions of Libtool will require --mode=MODE be specified. ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1103: /bin/sed: No such file or directory ../libtool: line 1156: /bin/sed: No such file or directory : compile: cannot determine name of library object from `' make[4]: *** [xapian_wrap.lo] Error 1 make[3]: *** [all-recursive] Error 1 make[2]: *** [all] Error 2 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 extconf.rb:3:in `system!': unhandled exception from extconf.rb:6 Gem files will remain installed in /opt/ruby-enterprise/lib/ruby/gems/1.8/gems/xapian-1.0.15 for inspection. Results logged to /opt/ruby-enterprise/lib/ruby/gems/1.8/gems/xapian-1.0.15/gem_make.out Any idea pal?

  Read the article

• Ajax/PHP contact form not able to send mail

  - by Steph

  The funny thing is it did work for one evening. I contacted my host, and they are saying there's no reason it should not be working. I have also attempted to test it in Firebug, but it seemed to be sending. And I specifically put the email address (hosted in my domain) on my email safe list, so that is not the culprit either. Would anyone here take a look at it for me? I'd be so grateful. In the header I have: <script type="text/javascript"> $(document).ready(function() { var options = { target: '#alert' }; $('#contactForm').ajaxForm(options); }); $.fn.clearForm = function() { return this.each(function() { var type = this.type, tag = this.tagName.toLowerCase(); if (tag == 'form') return $(':input',this).clearForm(); if (type == 'text' || type == 'password' || tag == 'textarea') this.value = ''; else if (type == 'checkbox' || type == 'radio') this.checked = false; else if (tag == 'select') this.selectedIndex = -1; }); }; </script> Here is the actual form: <form id="contactForm" method="post" action="sendmail.php"> <fieldset> <p>Email Me</p> <div id="fieldset_container"> <label for="name">Your Name:</label> <input type="text" name="name" id="name" /><br /><br /> <label for="email">Email:</label> <input type="text" name="email" id="email" /><br /><br /> <span style="display:none;"> <label for="last">Honeypot:</label> <input type="text" name="last" value="" id="last" /> </span><br /><br /> <label for="message">Comments &amp; Inquiries:</label> <textarea name="message" id="message" cols="" rows=""></textarea><br/> </div> <div id="submit_button"> <input type="submit" name="submit" id="submit" value="Send It" /> </div> </fieldset> </form> <div class="message"><div id="alert"></div></div> Here is the code from my validating page, sendmail.php: <?php // Who you want to recieve the emails from the form. (Hint: generally you.) $sendto = '[email protected]'; // The subject you'll see in your inbox $subject = 'SH Contact Form'; // Message for the user when he/she doesn't fill in the form correctly. $errormessage = 'There seems to have been a problem. May I suggest...'; // Message for the user when he/she fills in the form correctly. $thanks = "Thanks for the email!"; // Message for the bot when it fills in in at all. $honeypot = "You filled in the honeypot! If you're human, try again!"; // Various messages displayed when the fields are empty. $emptyname = 'Entering your name?'; $emptyemail = 'Entering your email address?'; $emptymessage = 'Entering a message?'; // Various messages displayed when the fields are incorrectly formatted. $alertname = 'Entering your name using only the standard alphabet?'; $alertemail = 'Entering your email in this format: <i>[email protected]</i>?'; $alertmessage = "Making sure you aren't using any parenthesis or other escaping characters in the message? Most URLS are fine though!"; //Setting used variables. $alert = ''; $pass = 0; // Sanitizing the data, kind of done via error messages first. Twice is better! ;-) function clean_var($variable) { $variable = strip_tags(stripslashes(trim(rtrim($variable)))); return $variable; } //The first if for honeypot. if ( empty($_REQUEST['last']) ) { // A bunch of if's for all the fields and the error messages. if ( empty($_REQUEST['name']) ) { $pass = 1; $alert .= "<li>" . $emptyname . "</li>"; } elseif ( ereg( "[][{}()*+?.\\^$|]", $_REQUEST['name'] ) ) { $pass = 1; $alert .= "<li>" . $alertname . "</li>"; } if ( empty($_REQUEST['email']) ) { $pass = 1; $alert .= "<li>" . $emptyemail . "</li>"; } elseif ( !eregi("^[_a-z0-9-]+(.[_a-z0-9-]+)*@[a-z0-9-]+(.[a-z0-9-]+)*(.[a-z]{2,3})$", $_REQUEST['email']) ) { $pass = 1; $alert .= "<li>" . $alertemail . "</li>"; } if ( empty($_REQUEST['message']) ) { $pass = 1; $alert .= "<li>" . $emptymessage . "</li>"; } elseif ( ereg( "[][{}()*+?\\^$|]", $_REQUEST['message'] ) ) { $pass = 1; $alert .= "<li>" . $alertmessage . "</li>"; } //If the user err'd, print the error messages. if ( $pass==1 ) { //This first line is for ajax/javascript, comment it or delete it if this isn't your cup o' tea. echo "<script>$(\".message\").hide(\"slow\").show(\"slow\"); </script>"; echo "<b>" . $errormessage . "</b>"; echo "<ul>"; echo $alert; echo "</ul>"; // If the user didn't err and there is in fact a message, time to email it. } elseif (isset($_REQUEST['message'])) { //Construct the message. $message = "From: " . clean_var($_REQUEST['name']) . "\n"; $message .= "Email: " . clean_var($_REQUEST['email']) . "\n"; $message .= "Message: \n" . clean_var($_REQUEST['message']); $header = 'From:'. clean_var($_REQUEST['email']); //Mail the message - for production mail($sendto, $subject, $message, $header, "[email protected]"); //This is for javascript, echo "<script>$(\".message\").hide(\"slow\").show(\"slow\").animate({opacity: 1.0}, 4000).hide(\"slow\"); $(':input').clearForm() </script>"; echo $thanks; die(); //Echo the email message - for development echo "<br/><br/>" . $message; } //If honeypot is filled, trigger the message that bot likely won't see. } else { echo "<script>$(\".message\").hide(\"slow\").show(\"slow\"); </script>"; echo $honeypot; } ?>

  Read the article

• Can't build pyxpcom on OS X 10.6

  - by Gj

  I've been following these instructions at https://developer.mozilla.org/en/Building_PyXPCOM but getting this: $ make make export make[2]: Nothing to be done for `export'. make[4]: Nothing to be done for `export'. make[4]: Nothing to be done for `export'. /opt/local/bin/python2.5 ../../../src/config/nsinstall.py -L /usr/local/pyxpcom/build/xpcom/src -m 644 ../../../src/xpcom/src/PyXPCOM.h ../../dist/include make[3]: Nothing to be done for `export'. /opt/local/bin/python2.5 ../../../../src/config/nsinstall.py -D ../../../dist/idl /opt/local/bin/python2.5 ../../../../src/config/nsinstall.py -D ../../../dist/idl make[4]: *** No rule to make target `_xpidlgen/py_test_component.h', needed by `export'. Stop. make[3]: *** [export] Error 2 make[2]: *** [export] Error 2 make[1]: *** [export] Error 2 make: *** [default] Error 2 Any ideas? An interesting anomaly is that despite me setting the PYTHON env variable to Python 2.6, the configure and make both seem to go after the 2.5... Thanks for any advice! PS here's the configure output: $ ../src/configure --with-libxul-sdk=/Users/me/xulrunner-sdk/ loading cache ./config.cache checking host system type... i386-apple-darwin10.3.0 checking target system type... i386-apple-darwin10.3.0 checking build system type... i386-apple-darwin10.3.0 checking for mawk... (cached) gawk checking for perl5... (cached) /opt/local/bin/perl5 checking for gcc... (cached) gcc checking whether the C compiler (gcc ) works... yes checking whether the C compiler (gcc ) is a cross-compiler... no checking whether we are using GNU C... (cached) yes checking whether gcc accepts -g... (cached) yes checking for c++... (cached) c++ checking whether the C++ compiler (c++ ) works... yes checking whether the C++ compiler (c++ ) is a cross-compiler... no checking whether we are using GNU C++... (cached) yes checking whether c++ accepts -g... (cached) yes checking for ranlib... (cached) ranlib checking for as... (cached) /usr/bin/as checking for ar... (cached) ar checking for ld... (cached) ld checking for strip... (cached) strip checking for windres... no checking whether gcc and cc understand -c and -o together... (cached) yes checking how to run the C preprocessor... (cached) gcc -E checking how to run the C++ preprocessor... (cached) c++ -E checking for a BSD compatible install... (cached) /usr/bin/install -c checking whether ln -s works... (cached) yes checking for minimum required perl version >= 5.006... 5.008009 checking for full perl installation... yes checking for /opt/local/bin/python... (cached) /opt/local/bin/python2.5 checking for doxygen... (cached) : checking for whoami... (cached) /usr/bin/whoami checking for autoconf... (cached) /opt/local/bin/autoconf checking for unzip... (cached) /usr/bin/unzip checking for zip... (cached) /usr/bin/zip checking for makedepend... (cached) /opt/local/bin/makedepend checking for xargs... (cached) /usr/bin/xargs checking for pbbuild... (cached) /usr/bin/xcodebuild checking for sdp... (cached) /usr/bin/sdp checking for gmake... (cached) /opt/local/bin/gmake checking for X... (cached) no checking whether the compiler supports -Wno-invalid-offsetof... yes checking whether ld has archive extraction flags... (cached) no checking that static assertion macros used in autoconf tests work... (cached) yes checking for 64-bit OS... yes checking for minimum required Python version >= 2.4... yes checking for -dead_strip option to ld... yes checking for ANSI C header files... (cached) yes checking for working const... (cached) yes checking for mode_t... (cached) yes checking for off_t... (cached) yes checking for pid_t... (cached) yes checking for size_t... (cached) yes checking for st_blksize in struct stat... (cached) yes checking for siginfo_t... (cached) yes checking for int16_t... (cached) yes checking for int32_t... (cached) yes checking for int64_t... (cached) yes checking for int64... (cached) no checking for uint... (cached) yes checking for uint_t... (cached) no checking for uint16_t... (cached) no checking for uname.domainname... (cached) no checking for uname.__domainname... (cached) no checking for usable char16_t (2 bytes, unsigned)... (cached) no checking for usable wchar_t (2 bytes, unsigned)... (cached) no checking for compiler -fshort-wchar option... (cached) yes checking for visibility(hidden) attribute... (cached) yes checking for visibility(default) attribute... (cached) yes checking for visibility pragma support... (cached) yes checking For gcc visibility bug with class-level attributes (GCC bug 26905)... (cached) yes checking For x86_64 gcc visibility bug with builtins (GCC bug 20297)... (cached) no checking for dirent.h that defines DIR... (cached) yes checking for opendir in -ldir... (cached) no checking for sys/byteorder.h... (cached) no checking for compat.h... (cached) no checking for getopt.h... (cached) yes checking for sys/bitypes.h... (cached) no checking for memory.h... (cached) yes checking for unistd.h... (cached) yes checking for gnu/libc-version.h... (cached) no checking for nl_types.h... (cached) yes checking for malloc.h... (cached) no checking for X11/XKBlib.h... (cached) yes checking for io.h... (cached) no checking for sys/statvfs.h... (cached) yes checking for sys/statfs.h... (cached) no checking for sys/vfs.h... (cached) no checking for sys/mount.h... (cached) yes checking for sys/quota.h... (cached) yes checking for mmintrin.h... (cached) yes checking for new... (cached) yes checking for sys/cdefs.h... (cached) yes checking for gethostbyname_r in -lc_r... (cached) no checking for dladdr... (cached) yes checking for socket in -lsocket... (cached) no checking whether mmap() sees write()s... yes checking whether gcc needs -traditional... (cached) no checking for 8-bit clean memcmp... (cached) yes checking for random... (cached) yes checking for strerror... (cached) yes checking for lchown... (cached) yes checking for fchmod... (cached) yes checking for snprintf... (cached) yes checking for statvfs... (cached) yes checking for memmove... (cached) yes checking for rint... (cached) yes checking for stat64... (cached) yes checking for lstat64... (cached) yes checking for truncate64... (cached) no checking for statvfs64... (cached) no checking for setbuf... (cached) yes checking for isatty... (cached) yes checking for flockfile... (cached) yes checking for getpagesize... (cached) yes checking for localtime_r... (cached) yes checking for strtok_r... (cached) yes checking for wcrtomb... (cached) yes checking for mbrtowc... (cached) yes checking for res_ninit()... (cached) no checking for gnu_get_libc_version()... (cached) no ../src/configure: line 9881: AM_LANGINFO_CODESET: command not found checking for an implementation of va_copy()... (cached) yes checking for an implementation of __va_copy()... (cached) yes checking whether va_lists can be copied by value... (cached) no checking for C++ exceptions flag... (cached) -fno-exceptions checking for gcc 3.0 ABI... (cached) yes checking for C++ "explicit" keyword... (cached) yes checking for C++ "typename" keyword... (cached) yes checking for modern C++ template specialization syntax support... (cached) yes checking whether partial template specialization works... (cached) yes checking whether operators must be re-defined for templates derived from templates... (cached) no checking whether we need to cast a derived template to pass as its base class... (cached) no checking whether the compiler can resolve const ambiguities for templates... (cached) yes checking whether the C++ "using" keyword can change access... (cached) yes checking whether the C++ "using" keyword resolves ambiguity... (cached) yes checking for "std::" namespace... (cached) yes checking whether standard template operator!=() is ambiguous... (cached) unambiguous checking for C++ reinterpret_cast... (cached) yes checking for C++ dynamic_cast to void*... (cached) yes checking whether C++ requires implementation of unused virtual methods... (cached) yes checking for trouble comparing to zero near std::operator!=()... (cached) no checking for LC_MESSAGES... (cached) yes checking for tar archiver... checking for gnutar... (cached) gnutar gnutar checking for wget... checking for wget... (cached) wget wget checking for valid optimization flags... yes checking for gcc -pipe support... yes checking whether compiler supports -Wno-long-long... yes checking whether C compiler supports -fprofile-generate... yes checking for correct temporary object destruction order... yes checking for correct overload resolution with const and templates... no Building Python extensions using python-2.5 from /opt/local/Library/Frameworks/Python.framework/Versions/2.5 creating ./config.status creating config/autoconf.mk creating Makefile creating xpcom/Makefile creating xpcom/src/Makefile creating xpcom/src/loader/Makefile creating xpcom/src/module/Makefile creating xpcom/components/Makefile creating xpcom/test/Makefile creating xpcom/test/test_component/Makefile creating dom/Makefile creating dom/src/Makefile creating dom/test/Makefile creating dom/test/pyxultest/Makefile creating dom/nsdom/Makefile creating dom/nsdom/test/Makefile

  Read the article

• getaddrinfo appears to return different results between Windows and Ubuntu?

  - by MrDuk

  I have the following two sets of code: Windows #undef UNICODE #include <winsock2.h> #include <ws2tcpip.h> #include <stdio.h> // link with Ws2_32.lib #pragma comment (lib, "Ws2_32.lib") int __cdecl main(int argc, char **argv) { //----------------------------------------- // Declare and initialize variables WSADATA wsaData; int iResult; INT iRetval; DWORD dwRetval; argv[1] = "www.google.com"; argv[2] = "80"; int i = 1; struct addrinfo *result = NULL; struct addrinfo *ptr = NULL; struct addrinfo hints; struct sockaddr_in *sockaddr_ipv4; // struct sockaddr_in6 *sockaddr_ipv6; LPSOCKADDR sockaddr_ip; char ipstringbuffer[46]; DWORD ipbufferlength = 46; /* // Validate the parameters if (argc != 3) { printf("usage: %s <hostname> <servicename>\n", argv[0]); printf("getaddrinfo provides protocol-independent translation\n"); printf(" from an ANSI host name to an IP address\n"); printf("%s example usage\n", argv[0]); printf(" %s www.contoso.com 0\n", argv[0]); return 1; } */ // Initialize Winsock iResult = WSAStartup(MAKEWORD(2, 2), &wsaData); if (iResult != 0) { printf("WSAStartup failed: %d\n", iResult); return 1; } //-------------------------------- // Setup the hints address info structure // which is passed to the getaddrinfo() function ZeroMemory( &hints, sizeof(hints) ); hints.ai_family = AF_UNSPEC; hints.ai_socktype = SOCK_STREAM; // hints.ai_protocol = IPPROTO_TCP; printf("Calling getaddrinfo with following parameters:\n"); printf("\tnodename = %s\n", argv[1]); printf("\tservname (or port) = %s\n\n", argv[2]); //-------------------------------- // Call getaddrinfo(). If the call succeeds, // the result variable will hold a linked list // of addrinfo structures containing response // information dwRetval = getaddrinfo(argv[1], argv[2], &hints, &result); if ( dwRetval != 0 ) { printf("getaddrinfo failed with error: %d\n", dwRetval); WSACleanup(); return 1; } printf("getaddrinfo returned success\n"); // Retrieve each address and print out the hex bytes for(ptr=result; ptr != NULL ;ptr=ptr->ai_next) { printf("getaddrinfo response %d\n", i++); printf("\tFlags: 0x%x\n", ptr->ai_flags); printf("\tFamily: "); switch (ptr->ai_family) { case AF_UNSPEC: printf("Unspecified\n"); break; case AF_INET: printf("AF_INET (IPv4)\n"); sockaddr_ipv4 = (struct sockaddr_in *) ptr->ai_addr; printf("\tIPv4 address %s\n", inet_ntoa(sockaddr_ipv4->sin_addr) ); break; case AF_INET6: printf("AF_INET6 (IPv6)\n"); // the InetNtop function is available on Windows Vista and later // sockaddr_ipv6 = (struct sockaddr_in6 *) ptr->ai_addr; // printf("\tIPv6 address %s\n", // InetNtop(AF_INET6, &sockaddr_ipv6->sin6_addr, ipstringbuffer, 46) ); // We use WSAAddressToString since it is supported on Windows XP and later sockaddr_ip = (LPSOCKADDR) ptr->ai_addr; // The buffer length is changed by each call to WSAAddresstoString // So we need to set it for each iteration through the loop for safety ipbufferlength = 46; iRetval = WSAAddressToString(sockaddr_ip, (DWORD) ptr->ai_addrlen, NULL, ipstringbuffer, &ipbufferlength ); if (iRetval) printf("WSAAddressToString failed with %u\n", WSAGetLastError() ); else printf("\tIPv6 address %s\n", ipstringbuffer); break; case AF_NETBIOS: printf("AF_NETBIOS (NetBIOS)\n"); break; default: printf("Other %ld\n", ptr->ai_family); break; } printf("\tSocket type: "); switch (ptr->ai_socktype) { case 0: printf("Unspecified\n"); break; case SOCK_STREAM: printf("SOCK_STREAM (stream)\n"); break; case SOCK_DGRAM: printf("SOCK_DGRAM (datagram) \n"); break; case SOCK_RAW: printf("SOCK_RAW (raw) \n"); break; case SOCK_RDM: printf("SOCK_RDM (reliable message datagram)\n"); break; case SOCK_SEQPACKET: printf("SOCK_SEQPACKET (pseudo-stream packet)\n"); break; default: printf("Other %ld\n", ptr->ai_socktype); break; } printf("\tProtocol: "); switch (ptr->ai_protocol) { case 0: printf("Unspecified\n"); break; case IPPROTO_TCP: printf("IPPROTO_TCP (TCP)\n"); break; case IPPROTO_UDP: printf("IPPROTO_UDP (UDP) \n"); break; default: printf("Other %ld\n", ptr->ai_protocol); break; } printf("\tLength of this sockaddr: %d\n", ptr->ai_addrlen); printf("\tCanonical name: %s\n", ptr->ai_canonname); } freeaddrinfo(result); WSACleanup(); return 0; } Ubuntu /* ** listener.c -- a datagram sockets "server" demo */ #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <errno.h> #include <string.h> #include <sys/types.h> #include <sys/socket.h> #include <netinet/in.h> #include <arpa/inet.h> #include <netdb.h> #define MYPORT "4950" // the port users will be connecting to #define MAXBUFLEN 100 // get sockaddr, IPv4 or IPv6: void *get_in_addr(struct sockaddr *sa) { if (sa->sa_family == AF_INET) { return &(((struct sockaddr_in*)sa)->sin_addr); } return &(((struct sockaddr_in6*)sa)->sin6_addr); } int main(void) { int sockfd; struct addrinfo hints, *servinfo, *p; int rv; int numbytes; struct sockaddr_storage their_addr; char buf[MAXBUFLEN]; socklen_t addr_len; char s[INET6_ADDRSTRLEN]; memset(&hints, 0, sizeof hints); hints.ai_family = AF_UNSPEC; // set to AF_INET to force IPv4 hints.ai_socktype = SOCK_DGRAM; hints.ai_flags = AI_PASSIVE; // use my IP if ((rv = getaddrinfo(NULL, MYPORT, &hints, &servinfo)) != 0) { fprintf(stderr, "getaddrinfo: %s\n", gai_strerror(rv)); return 1; } // loop through all the results and bind to the first we can for(p = servinfo; p != NULL; p = p->ai_next) { if ((sockfd = socket(p->ai_family, p->ai_socktype, p->ai_protocol)) == -1) { perror("listener: socket"); continue; } if (bind(sockfd, p->ai_addr, p->ai_addrlen) == -1) { close(sockfd); perror("listener: bind"); continue; } break; } if (p == NULL) { fprintf(stderr, "listener: failed to bind socket\n"); return 2; } freeaddrinfo(servinfo); printf("listener: waiting to recvfrom...\n"); addr_len = sizeof their_addr; if ((numbytes = recvfrom(sockfd, buf, MAXBUFLEN-1 , 0, (struct sockaddr *)&their_addr, &addr_len)) == -1) { perror("recvfrom"); exit(1); } printf("listener: got packet from %s\n", inet_ntop(their_addr.ss_family, get_in_addr((struct sockaddr *)&their_addr), s, sizeof s)); printf("listener: packet is %d bytes long\n", numbytes); buf[numbytes] = '\0'; printf("listener: packet contains \"%s\"\n", buf); close(sockfd); return 0; } When I attempt www.google.com, I don't get the ipv6 socket returned on Windows - why is this? Outputs: (ubuntu) caleb@ub1:~/Documents/dev/cs438/mp0/MP0$ ./a.out www.google.com IP addresses for www.google.com: IPv4: 74.125.228.115 IPv4: 74.125.228.116 IPv4: 74.125.228.112 IPv4: 74.125.228.113 IPv4: 74.125.228.114 IPv6: 2607:f8b0:4004:803::1010 Outputs: (win) Calling getaddrinfo with following parameters: nodename = www.google.com servname (or port) = 80 getaddrinfo returned success getaddrinfo response 1 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.114 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null) getaddrinfo response 2 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.115 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null) getaddrinfo response 3 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.116 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null) getaddrinfo response 4 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.112 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null) getaddrinfo response 5 Flags: 0x0 Family: AF_INET (IPv4) IPv4 address 74.125.228.113 Socket type: SOCK_STREAM (stream) Protocol: Unspecified Length of this sockaddr: 16 Canonical name: (null)

  Read the article

• TabHost disappears after locking the phone and reopening it:

  - by Emil Adz

  I have a weird issue with my TabHost in my FragmentActivity that contains a ViewPager. The problem is that when I close my phone (press the power button) while I use my application, and then I turn back the phone and my application gets reopened, at this point my TabHost is missing. So the closing of my phone is causes the TabHost to disappear. My guess would be that I need to save my tabHost state in the saveInstanceState object, and restore it in onResume I only have no idea how it's done. here is my code for the FragmentActivity: public class TabsViewPagerFragmentActivity extends FragmentActivity implements ViewPager.OnPageChangeListener, TabHost.OnTabChangeListener { static final String TAG = TabsViewPagerFragmentActivity.class.getSimpleName(); private TabHost mTabHost; private ViewPager mViewPager; private HashMap<String, TabInfo> mapTabInfo; public ViewPagerAdapter mPagerAdapter; private TextView tvReportName, tvTabTitle; private Button bBackToParameters; private Dialog progressDialog; private SGRaportManagerAppObj application; private int numberOfTabs = 0; private Display display; public static final int POPUP_MARGIN = 6; LeftSideMenu leftSideMenu; public void NotifyTabActivityViewPagerAdapter() { mPagerAdapter.notifyDataSetChanged(); } public ViewPagerAdapter getTabActivityViewPagerAdapter() { return mPagerAdapter; } public ViewPager getTabActivityViewPager() { return mViewPager; } public void setCurrentTabTitle (String title) { tvTabTitle.setText(title); Log.d(TAG, "set tab title from activity: "+title); } /** * Maintains extrinsic info of a tab's construct */ private class TabInfo { private String tag; private Class<?> clss; private Bundle args; private Fragment fragment; TabInfo(String tag, Class<?> clazz, Bundle args) { this.tag = tag; this.clss = clazz; this.args = args; } } /** * A simple factory that returns dummy views to the Tabhost */ class TabFactory implements TabContentFactory { private final Context mContext; /** * @param context */ public TabFactory(Context context) { mContext = context; } /** (non-Javadoc) * @see android.widget.TabHost.TabContentFactory#createTabContent(java.lang.String) */ public View createTabContent(String tag) { View v = new View(mContext); v.setMinimumWidth(0); v.setMinimumHeight(0); return v; } } /** (non-Javadoc) * @see android.support.v4.app.FragmentActivity#onCreate(android.os.Bundle) */ public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); application = SGRaportManagerAppObj.getInstance(); display = ((WindowManager)getSystemService(Context.WINDOW_SERVICE)).getDefaultDisplay(); // Inflate the layout setContentView(R.layout.tabs_screen_activity_layout); tvTabTitle = (TextView) findViewById(R.id.tvTabName); tvReportName = (TextView)findViewById(R.id.tvReportName); tvReportName.setText(application.currentReport.getName()+ " - "); bBackToParameters = (Button) findViewById(R.id.bBackToParameters); leftSideMenu = (LeftSideMenu) findViewById(R.id.leftSideMenu); applyOnClickListenerToLeftSideMenu(); findViewById(R.id.showLeftMenuButton).setOnClickListener(new View.OnClickListener() { @Override public void onClick(View v) { Display d = ((WindowManager)getSystemService(Context.WINDOW_SERVICE)).getDefaultDisplay(); int width = d.getWidth(); View panel = findViewById(R.id.leftSideMenu); View appPanel = findViewById(R.id.appLayout); if (panel.getVisibility() == View.GONE){ appPanel.setLayoutParams(new LinearLayout.LayoutParams(width, LayoutParams.FILL_PARENT)); panel.setVisibility(View.VISIBLE); applyOnClickListenerToLeftSideMenu(); }else{ ToggleButton button = (ToggleButton) findViewById(R.id.showLeftMenuButton); button.setChecked(false); panel.setVisibility(View.GONE); } } }); // Initialise the TabHost progressDialog = DialogUtils.createProgressDialog(this, this.getString(R.string.populating_view_pager)); progressDialog.show(); if (SGRaportManagerAppObj.getInstance().parametersRepository.getParametersRepository().size() == 0) { bBackToParameters.setText(R.string.back_to_report_list); } this.initialiseTabHost(savedInstanceState); if (savedInstanceState != null) { mTabHost.setCurrentTabByTag(savedInstanceState.getString("tab")); //set the tab as per the saved state } // Intialise ViewPager this.intialiseViewPager(); progressDialog.dismiss(); } /** (non-Javadoc) * @see android.support.v4.app.FragmentActivity#onSaveInstanceState(android.os.Bundle) */ protected void onSaveInstanceState(Bundle outState) { outState.putString("tab", mTabHost.getCurrentTabTag()); //save the tab selected super.onSaveInstanceState(outState); } /** * Initialise ViewPager */ public void intialiseViewPager() { List<Fragment> fragments = new Vector<Fragment>(); // TabInfo tabInfo = null; if (application.getCurrentDataSource().equals(DataSource.SSRS)) { numberOfTabs = application.currentReport.getTabsList().size(); } else if (application.getCurrentDataSource().equals(DataSource.SGRDL)) { numberOfTabs = application.currentReport.getODTabsList().size(); Log.d(TAG, "CURRENT REPORT FROM VIEW PAGER: "+ application.currentReport.toString()); } Log.d(TAG,"Current Tabs number from TabsViewPager activity: " +numberOfTabs); if (application.getCurrentDataSource().equals(DataSource.SSRS)) { for (int i = 0; i < numberOfTabs; i++) { Tab tempTab = application.currentReport.getTabsList().get(i); if (tempTab.getTabTemplateId() == 7) { GridFragment gridFragment = new GridFragment(tempTab); fragments.add(gridFragment); } else if (tempTab.getTabTemplateId() == 8) { NewChartFragment chartFragment = new NewChartFragment(tempTab, this); fragments.add(chartFragment); } } } else if (application.getCurrentDataSource().equals(DataSource.SGRDL)) { for (int i = 0; i < numberOfTabs; i++) { ODTab tempTab = application.currentReport.getODTabsList().get(i); if (tempTab.getTabType().equals(ODGrid.XML_GRID_ELEMENT)) { GridFragment gridFragment = GridFragment.newInstance(tempTab.getTabId()); fragments.add(gridFragment); } else if (tempTab.getTabType().equals(ODChart.XML_CHART_ELEMENT)) { NewChartFragment chartFragment = NewChartFragment.newInstance(tempTab.getTabId()); fragments.add(chartFragment); } } } Log.d(TAG, "Current report fragments set to adapter: "+fragments.toString()); /* if (this.mPagerAdapter == null) { this.mPagerAdapter = new ViewPagerAdapter(super.getSupportFragmentManager(), fragments); } else { this.mPagerAdapter.removeAllFragments(); this.mPagerAdapter.addFragmentsListToAdapter(fragments); } */ this.mPagerAdapter = new ViewPagerAdapter(super.getSupportFragmentManager(), fragments); this.mViewPager = (ViewPager)super.findViewById(R.id.pager); // this.mViewPager.setAdapter(null); this.mViewPager.setAdapter(this.mPagerAdapter); this.mViewPager.setOffscreenPageLimit(0); this.mViewPager.setOnPageChangeListener(this); Log.d(TAG, "Adapter initialized!"); } /** * Initialise the Tab Host */ public void initialiseTabHost(Bundle args) { mTabHost = (TabHost)findViewById(android.R.id.tabhost); /* //new edit if (mTabHost.getChildCount() > 0) { mTabHost.removeAllViews(); } */ mTabHost.setup(); TabInfo tabInfo = null; mapTabInfo = new HashMap<String, TabsViewPagerFragmentActivity.TabInfo>(); if (args != null) {} else { if (application.getCurrentDataSource().equals(DataSource.SSRS)) { int numberOfTabs = application.currentReport.getTabsList().size(); for (int i = 0; i < numberOfTabs; i++) { Tab tempTab = application.currentReport.getTabsList().get(i); if (tempTab.getTabTemplateId() == 7) { //GridFragment gridFragment = new GridFragment(tempTab); TabsViewPagerFragmentActivity.AddTab(this, this.mTabHost, this.mTabHost.newTabSpec("Tab "+String.valueOf(i)).setIndicator("Tab "+String.valueOf(i)), ( tabInfo = new TabInfo("Tab "+String.valueOf(i), GridFragment.class, args))); this.mapTabInfo.put(tabInfo.tag, tabInfo); } else if (tempTab.getTabTemplateId() == 8) { TabsViewPagerFragmentActivity.AddTab(this, this.mTabHost, this.mTabHost.newTabSpec("Tab "+String.valueOf(i)).setIndicator("Tab "+String.valueOf(i)), ( tabInfo = new TabInfo("Tab "+String.valueOf(i), NewChartFragment.class, args))); this.mapTabInfo.put(tabInfo.tag, tabInfo); } } } else if (application.getCurrentDataSource().equals(DataSource.SGRDL)) { int numberOfTabs = application.currentReport.getODTabsList().size(); for (int i = 0; i < numberOfTabs; i++) { ODTab tempTab = application.currentReport.getODTabsList().get(i); // Log.d(TAG,"Crashed Tab type: "+ tempTab.getTabType()); if (tempTab.getTabType().equals(ODGrid.XML_GRID_ELEMENT)) { //GridFragment gridFragment = new GridFragment(tempTab); TabsViewPagerFragmentActivity.AddTab(this, this.mTabHost, this.mTabHost.newTabSpec("Tab "+String.valueOf(i)).setIndicator("Tab "+String.valueOf(i)), ( tabInfo = new TabInfo("Tab "+String.valueOf(i), GridFragment.class, args))); this.mapTabInfo.put(tabInfo.tag, tabInfo); } else if (tempTab.getTabType().equals(ODChart.XML_CHART_ELEMENT)) { TabsViewPagerFragmentActivity.AddTab(this, this.mTabHost, this.mTabHost.newTabSpec("Tab "+String.valueOf(i)).setIndicator("Tab "+String.valueOf(i)), ( tabInfo = new TabInfo("Tab "+String.valueOf(i), NewChartFragment.class, args))); this.mapTabInfo.put(tabInfo.tag, tabInfo); } } } } // Default to first tab //this.onTabChanged("Tab1"); // mTabHost.setOnTabChangedListener(this); } /** * Add Tab content to the Tabhost * @param activity * @param tabHost * @param tabSpec * @param clss * @param args */ private static void AddTab(TabsViewPagerFragmentActivity activity, TabHost tabHost, TabHost.TabSpec tabSpec, TabInfo tabInfo) { // Attach a Tab view factory to the spec ImageView indicator = new ImageView(activity.getBaseContext()); indicator.setPadding(10, 10, 10, 10); indicator.setImageResource(R.drawable.tab_select_icon_selector); LinearLayout.LayoutParams lp = new LinearLayout.LayoutParams(LinearLayout.LayoutParams.WRAP_CONTENT, LinearLayout.LayoutParams.WRAP_CONTENT); lp.setMargins(10, 10, 10, 10); indicator.setLayoutParams(lp); tabSpec.setIndicator(indicator); tabSpec.setContent(activity.new TabFactory(activity)); tabHost.addTab(tabSpec); } /** (non-Javadoc) * @see android.widget.TabHost.OnTabChangeListener#onTabChanged(java.lang.String) */ public void onTabChanged(String tag) { //TabInfo newTab = this.mapTabInfo.get(tag); int pos = this.mTabHost.getCurrentTab(); this.mViewPager.setCurrentItem(pos); } /* (non-Javadoc) * @see android.support.v4.view.ViewPager.OnPageChangeListener#onPageScrolled(int, float, int) */ @Override public void onPageScrolled(int position, float positionOffset, int positionOffsetPixels) { // TODO Auto-generated method stub } /* (non-Javadoc) * @see android.support.v4.view.ViewPager.OnPageChangeListener#onPageSelected(int) */ @Override public void onPageSelected(int position) { // TODO Auto-generated method stub this.mTabHost.setCurrentTab(position); } /* (non-Javadoc) * @see android.support.v4.view.ViewPager.OnPageChangeListener#onPageScrollStateChanged(int) */ @Override public void onPageScrollStateChanged(int state) { // TODO Auto-generated method stub } How would one save the state of the TabHost and restore it in onResume? Any help would be very appreciated.

  Read the article

• can someone help me fix my code?

  - by user267490

  Hi, I have this code I been working on but I'm having a hard time for it to work. I did one but it only works in php 5.3 and I realized my host only supports php 5.0! do I was trying to see if I could get it to work on my sever correctly, I'm just lost and tired lol <?php //Temporarily turn on error reporting @ini_set('display_errors', 1); error_reporting(E_ALL); // Set default timezone (New PHP versions complain without this!) date_default_timezone_set("GMT"); // Common set_time_limit(0); require_once('dbc.php'); require_once('sessions.php'); page_protect(); // Image settings define('IMG_FIELD_NAME', 'cons_image'); // Max upload size in bytes (for form) define ('MAX_SIZE_IN_BYTES', '512000'); // Width and height for the thumbnail define ('THUMB_WIDTH', '150'); define ('THUMB_HEIGHT', '150'); ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en"> <head> <title>whatever</title> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <style type="text\css"> .validationerrorText { color:red; font-size:85%; font-weight:bold; } </style> </head> <body> <h1>Change image</h1> <?php $errors = array(); // Process form if (isset($_POST['submit'])) { // Get filename $filename = stripslashes($_FILES['cons_image']['name']); // Validation of image file upload $allowedFileTypes = array('image/gif', 'image/jpg', 'image/jpeg', 'image/png'); if ($_FILES[IMG_FIELD_NAME]['error'] == UPLOAD_ERR_NO_FILE) { $errors['img_empty'] = true; } elseif (($_FILES[IMG_FIELD_NAME]['type'] != '') && (!in_array($_FILES[IMG_FIELD_NAME]['type'], $allowedFileTypes))) { $errors['img_type'] = true; } elseif (($_FILES[IMG_FIELD_NAME]['error'] == UPLOAD_ERR_INI_SIZE) || ($_FILES[IMG_FIELD_NAME]['error'] == UPLOAD_ERR_FORM_SIZE) || ($_FILES[IMG_FIELD_NAME]['size'] > MAX_SIZE_IN_BYTES)) { $errors['img_size'] = true; } elseif ($_FILES[IMG_FIELD_NAME]['error'] != UPLOAD_ERR_OK) { $errors['img_error'] = true; } elseif (strlen($_FILES[IMG_FIELD_NAME]['name']) > 200) { $errors['img_nametoolong'] = true; } elseif ( (file_exists("\\uploads\\{$username}\\images\\banner\\{$filename}")) || (file_exists("\\uploads\\{$username}\\images\\banner\\thumbs\\{$filename}")) ) { $errors['img_fileexists'] = true; } if (! empty($errors)) { unlink($_FILES[IMG_FIELD_NAME]['tmp_name']); //cleanup: delete temp file } // Create thumbnail if (empty($errors)) { // Make directory if it doesn't exist if (!is_dir("\\uploads\\{$username}\\images\\banner\\thumbs\\")) { // Take directory and break it down into folders $dir = "uploads\\{$username}\\images\\banner\\thumbs"; $folders = explode("\\", $dir); // Create directory, adding folders as necessary as we go (ignore mkdir() errors, we'll check existance of full dir in a sec) $dirTmp = ''; foreach ($folders as $fldr) { if ($dirTmp != '') { $dirTmp .= "\\"; } $dirTmp .= $fldr; mkdir("\\".$dirTmp); //ignoring errors deliberately! } // Check again whether it exists if (!is_dir("\\uploads\\$username\\images\\banner\\thumbs\\")) { $errors['move_source'] = true; unlink($_FILES[IMG_FIELD_NAME]['tmp_name']); //cleanup: delete temp file } } if (empty($errors)) { // Move uploaded file to final destination if (! move_uploaded_file($_FILES[IMG_FIELD_NAME]['tmp_name'], "/uploads/$username/images/banner/$filename")) { $errors['move_source'] = true; unlink($_FILES[IMG_FIELD_NAME]['tmp_name']); //cleanup: delete temp file } else { // Create thumbnail in new dir if (! make_thumb("/uploads/$username/images/banner/$filename", "/uploads/$username/images/banner/thumbs/$filename")) { $errors['thumb'] = true; unlink("/uploads/$username/images/banner/$filename"); //cleanup: delete source file } } } } // Record in database if (empty($errors)) { // Find existing record and delete existing images $sql = "SELECT `bannerORIGINAL`, `bannerTHUMB` FROM `agent_settings` WHERE (`agent_id`={$user_id}) LIMIT 1"; $result = mysql_query($sql); if (!$result) { unlink("/uploads/$username/images/banner/$filename"); //cleanup: delete source file unlink("/uploads/$username/images/banner/thumbs/$filename"); //cleanup: delete thumbnail file die("<div><b>Error: Problem occurred with Database Query!</b><br /><br /><b>File:</b> " . __FILE__ . "<br /><b>Line:</b> " . __LINE__ . "<br /><b>MySQL Error Num:</b> " . mysql_errno() . "<br /><b>MySQL Error:</b> " . mysql_error() . "</div>"); } $numResults = mysql_num_rows($result); if ($numResults == 1) { $row = mysql_fetch_assoc($result); // Delete old files unlink("/uploads/$username/images/banner/" . $row['bannerORIGINAL']); //delete OLD source file unlink("/uploads/$username/images/banner/thumbs/" . $row['bannerTHUMB']); //delete OLD thumbnail file } // Update/create record with new images if ($numResults == 1) { $sql = "INSERT INTO `agent_settings` (`agent_id`, `bannerORIGINAL`, `bannerTHUMB`) VALUES ({$user_id}, '/uploads/$username/images/banner/$filename', '/uploads/$username/images/banner/thumbs/$filename')"; } else { $sql = "UPDATE `agent_settings` SET `bannerORIGINAL`='/uploads/$username/images/banner/$filename', `bannerTHUMB`='/uploads/$username/images/banner/thumbs/$filename' WHERE (`agent_id`={$user_id})"; } $result = mysql_query($sql); if (!$result) { unlink("/uploads/$username/images/banner/$filename"); //cleanup: delete source file unlink("/uploads/$username/images/banner/thumbs/$filename"); //cleanup: delete thumbnail file die("<div><b>Error: Problem occurred with Database Query!</b><br /><br /><b>File:</b> " . __FILE__ . "<br /><b>Line:</b> " . __LINE__ . "<br /><b>MySQL Error Num:</b> " . mysql_errno() . "<br /><b>MySQL Error:</b> " . mysql_error() . "</div>"); } } // Print success message and how the thumbnail image created if (empty($errors)) { echo "<p>Thumbnail created Successfully!</p>\n"; echo "<img src=\"/uploads/$username/images/banner/thumbs/$filename\" alt=\"New image thumbnail\" />\n"; echo "<br />\n"; } } if (isset($errors['move_source'])) { echo "\t\t<div>Error: Failure occurred moving uploaded source image!</div>\n"; } if (isset($errors['thumb'])) { echo "\t\t<div>Error: Failure occurred creating thumbnail!</div>\n"; } ?> <form action="" enctype="multipart/form-data" method="post"> <input type="hidden" name="MAX_FILE_SIZE" value="<?php echo MAX_SIZE_IN_BYTES; ?>" /> <label for="<?php echo IMG_FIELD_NAME; ?>">Image:</label> <input type="file" name="<?php echo IMG_FIELD_NAME; ?>" id="<?php echo IMG_FIELD_NAME; ?>" /> <?php if (isset($errors['img_empty'])) { echo "\t\t<div class=\"validationerrorText\">Required!</div>\n"; } if (isset($errors['img_type'])) { echo "\t\t<div class=\"validationerrorText\">File type not allowed! GIF/JPEG/PNG only!</div>\n"; } if (isset($errors['img_size'])) { echo "\t\t<div class=\"validationerrorText\">File size too large! Maximum size should be " . MAX_SIZE_IN_BYTES . "bytes!</div>\n"; } if (isset($errors['img_error'])) { echo "\t\t<div class=\"validationerrorText\">File upload error occured! Error code: {$_FILES[IMG_FIELD_NAME]['error']}</div>\n"; } if (isset($errors['img_nametoolong'])) { echo "\t\t<div class=\"validationerrorText\">Filename too long! 200 Chars max!</div>\n"; } if (isset($errors['img_fileexists'])) { echo "\t\t<div class=\"validationerrorText\">An image file already exists with that name!</div>\n"; } ?> <br /><input type="submit" name="submit" id="image1" value="Upload image" /> </form> </body> </html> <?php ################################# # # F U N C T I O N S # ################################# /* * Function: make_thumb * * Creates the thumbnail image from the uploaded image * the resize will be done considering the width and * height defined, but without deforming the image * * @param $sourceFile Path anf filename of source image * @param $destFile Path and filename to save thumbnail as * @param $new_w the new width to use * @param $new_h the new height to use */ function make_thumb($sourceFile, $destFile, $new_w=false, $new_h=false) { if ($new_w === false) { $new_w = THUMB_WIDTH; } if ($new_h === false) { $new_h = THUMB_HEIGHT; } // Get image extension $ext = strtolower(getExtension($sourceFile)); // Copy source switch($ext) { case 'jpg': case 'jpeg': $src_img = imagecreatefromjpeg($sourceFile); break; case 'png': $src_img = imagecreatefrompng($sourceFile); break; case 'gif': $src_img = imagecreatefromgif($sourceFile); break; default: return false; } if (!$src_img) { return false; } // Get dimmensions of the source image $old_x = imageSX($src_img); $old_y = imageSY($src_img); // Calculate the new dimmensions for the thumbnail image // 1. calculate the ratio by dividing the old dimmensions with the new ones // 2. if the ratio for the width is higher, the width will remain the one define in WIDTH variable // and the height will be calculated so the image ratio will not change // 3. otherwise we will use the height ratio for the image // as a result, only one of the dimmensions will be from the fixed ones $ratio1 = $old_x / $new_w; $ratio2 = $old_y / $new_h; if ($ratio1 > $ratio2) { $thumb_w = $new_w; $thumb_h = $old_y / $ratio1; } else { $thumb_h = $new_h; $thumb_w = $old_x / $ratio2; } // Create a new image with the new dimmensions $dst_img = ImageCreateTrueColor($thumb_w, $thumb_h); // Resize the big image to the new created one imagecopyresampled($dst_img, $src_img, 0, 0, 0, 0, $thumb_w, $thumb_h, $old_x, $old_y); // Output the created image to the file. Now we will have the thumbnail into the file named by $filename switch($ext) { case 'jpg': case 'jpeg': $result = imagepng($dst_img, $destFile); break; case 'png': $result = imagegif($dst_img, $destFile); break; case 'gif': $result = imagejpeg($dst_img, $destFile); break; default: //should never occur! } if (!$result) { return false; } // Destroy source and destination images imagedestroy($dst_img); imagedestroy($src_img); return true; } /* * Function: getExtension * * Returns the file extension from a given filename/path * * @param $str the filename to get the extension from */ function getExtension($str) { return pathinfo($str, PATHINFO_EXTENSION); } ?>

  Read the article

• What's New in ASP.NET 4

  - by Navaneeth

  The .NET Framework version 4 includes enhancements for ASP.NET 4 in targeted areas. Visual Studio 2010 and Microsoft Visual Web Developer Express also include enhancements and new features for improved Web development. This document provides an overview of many of the new features that are included in the upcoming release. This topic contains the following sections: ASP.NET Core Services ASP.NET Web Forms ASP.NET MVC Dynamic Data ASP.NET Chart Control Visual Web Developer Enhancements Web Application Deployment with Visual Studio 2010 Enhancements to ASP.NET Multi-Targeting ASP.NET Core Services ASP.NET 4 introduces many features that improve core ASP.NET services such as output caching and session state storage. Extensible Output Caching Since the time that ASP.NET 1.0 was released, output caching has enabled developers to store the generated output of pages, controls, and HTTP responses in memory. On subsequent Web requests, ASP.NET can serve content more quickly by retrieving the generated output from memory instead of regenerating the output from scratch. However, this approach has a limitation — generated content always has to be stored in memory. On servers that experience heavy traffic, the memory requirements for output caching can compete with memory requirements for other parts of a Web application. ASP.NET 4 adds extensibility to output caching that enables you to configure one or more custom output-cache providers. Output-cache providers can use any storage mechanism to persist HTML content. These storage options can include local or remote disks, cloud storage, and distributed cache engines. Output-cache provider extensibility in ASP.NET 4 lets you design more aggressive and more intelligent output-caching strategies for Web sites. For example, you can create an output-cache provider that caches the "Top 10" pages of a site in memory, while caching pages that get lower traffic on disk. Alternatively, you can cache every vary-by combination for a rendered page, but use a distributed cache so that the memory consumption is offloaded from front-end Web servers. You create a custom output-cache provider as a class that derives from the OutputCacheProvider type. You can then configure the provider in the Web.config file by using the new providers subsection of the outputCache element For more information and for examples that show how to configure the output cache, see outputCache Element for caching (ASP.NET Settings Schema). For more information about the classes that support caching, see the documentation for the OutputCache and OutputCacheProvider classes. By default, in ASP.NET 4, all HTTP responses, rendered pages, and controls use the in-memory output cache. The defaultProvider attribute for ASP.NET is AspNetInternalProvider. You can change the default output-cache provider used for a Web application by specifying a different provider name for defaultProvider attribute. In addition, you can select different output-cache providers for individual control and for individual requests and programmatically specify which provider to use. For more information, see the HttpApplication.GetOutputCacheProviderName(HttpContext) method. The easiest way to choose a different output-cache provider for different Web user controls is to do so declaratively by using the new providerName attribute in a page or control directive, as shown in the following example: <%@ OutputCache Duration="60" VaryByParam="None" providerName="DiskCache" %> Preloading Web Applications Some Web applications must load large amounts of data or must perform expensive initialization processing before serving the first request. In earlier versions of ASP.NET, for these situations you had to devise custom approaches to "wake up" an ASP.NET application and then run initialization code during the Application_Load method in the Global.asax file. To address this scenario, a new application preload manager (autostart feature) is available when ASP.NET 4 runs on IIS 7.5 on Windows Server 2008 R2. The preload feature provides a controlled approach for starting up an application pool, initializing an ASP.NET application, and then accepting HTTP requests. It lets you perform expensive application initialization prior to processing the first HTTP request. For example, you can use the application preload manager to initialize an application and then signal a load-balancer that the application was initialized and ready to accept HTTP traffic. To use the application preload manager, an IIS administrator sets an application pool in IIS 7.5 to be automatically started by using the following configuration in the applicationHost.config file: <applicationPools> <add name="MyApplicationPool" startMode="AlwaysRunning" /> </applicationPools> Because a single application pool can contain multiple applications, you specify individual applications to be automatically started by using the following configuration in the applicationHost.config file: <sites> <site name="MySite" id="1"> <application path="/" serviceAutoStartEnabled="true" serviceAutoStartProvider="PrewarmMyCache" > <!-- Additional content --> </application> </site> </sites> <!-- Additional content --> <serviceAutoStartProviders> <add name="PrewarmMyCache" type="MyNamespace.CustomInitialization, MyLibrary" /> </serviceAutoStartProviders> When an IIS 7.5 server is cold-started or when an individual application pool is recycled, IIS 7.5 uses the information in the applicationHost.config file to determine which Web applications have to be automatically started. For each application that is marked for preload, IIS7.5 sends a request to ASP.NET 4 to start the application in a state during which the application temporarily does not accept HTTP requests. When it is in this state, ASP.NET instantiates the type defined by the serviceAutoStartProvider attribute (as shown in the previous example) and calls into its public entry point. You create a managed preload type that has the required entry point by implementing the IProcessHostPreloadClient interface, as shown in the following example: public class CustomInitialization : System.Web.Hosting.IProcessHostPreloadClient { public void Preload(string[] parameters) { // Perform initialization. } } After your initialization code runs in the Preload method and after the method returns, the ASP.NET application is ready to process requests. Permanently Redirecting a Page Content in Web applications is often moved over the lifetime of the application. This can lead to links to be out of date, such as the links that are returned by search engines. In ASP.NET, developers have traditionally handled requests to old URLs by using the Redirect method to forward a request to the new URL. However, the Redirect method issues an HTTP 302 (Found) response (which is used for a temporary redirect). This results in an extra HTTP round trip. ASP.NET 4 adds a RedirectPermanent helper method that makes it easy to issue HTTP 301 (Moved Permanently) responses, as in the following example: RedirectPermanent("/newpath/foroldcontent.aspx"); Search engines and other user agents that recognize permanent redirects will store the new URL that is associated with the content, which eliminates the unnecessary round trip made by the browser for temporary redirects. Session State Compression By default, ASP.NET provides two options for storing session state across a Web farm. The first option is a session state provider that invokes an out-of-process session state server. The second option is a session state provider that stores data in a Microsoft SQL Server database. Because both options store state information outside a Web application's worker process, session state has to be serialized before it is sent to remote storage. If a large amount of data is saved in session state, the size of the serialized data can become very large. ASP.NET 4 introduces a new compression option for both kinds of out-of-process session state providers. By using this option, applications that have spare CPU cycles on Web servers can achieve substantial reductions in the size of serialized session state data. You can set this option using the new compressionEnabled attribute of the sessionState element in the configuration file. When the compressionEnabled configuration option is set to true, ASP.NET compresses (and decompresses) serialized session state by using the .NET Framework GZipStreamclass. The following example shows how to set this attribute. <sessionState mode="SqlServer" sqlConnectionString="data source=dbserver;Initial Catalog=aspnetstate" allowCustomSqlDatabase="true" compressionEnabled="true" /> ASP.NET Web Forms Web Forms has been a core feature in ASP.NET since the release of ASP.NET 1.0. Many enhancements have been in this area for ASP.NET 4, such as the following: The ability to set meta tags. More control over view state. Support for recently introduced browsers and devices. Easier ways to work with browser capabilities. Support for using ASP.NET routing with Web Forms. More control over generated IDs. The ability to persist selected rows in data controls. More control over rendered HTML in the FormView and ListView controls. Filtering support for data source controls. Enhanced support for Web standards and accessibility Setting Meta Tags with the Page.MetaKeywords and Page.MetaDescription Properties Two properties have been added to the Page class: MetaKeywords and MetaDescription. These two properties represent corresponding meta tags in the HTML rendered for a page, as shown in the following example: <head id="Head1" runat="server"> <title>Untitled Page</title> <meta name="keywords" content="keyword1, keyword2' /> <meta name="description" content="Description of my page" /> </head> These two properties work like the Title property does, and they can be set in the @ Page directive. For more information, see Page.MetaKeywords and Page.MetaDescription. Enabling View State for Individual Controls A new property has been added to the Control class: ViewStateMode. You can use this property to disable view state for all controls on a page except those for which you explicitly enable view state. View state data is included in a page's HTML and increases the amount of time it takes to send a page to the client and post it back. Storing more view state than is necessary can cause significant decrease in performance. In earlier versions of ASP.NET, you could reduce the impact of view state on a page's performance by disabling view state for specific controls. But sometimes it is easier to enable view state for a few controls that need it instead of disabling it for many that do not need it. For more information, see Control.ViewStateMode. Support for Recently Introduced Browsers and Devices ASP.NET includes a feature that is named browser capabilities that lets you determine the capabilities of the browser that a user is using. Browser capabilities are represented by the HttpBrowserCapabilities object which is stored in the HttpRequest.Browser property. Information about a particular browser's capabilities is defined by a browser definition file. In ASP.NET 4, these browser definition files have been updated to contain information about recently introduced browsers and devices such as Google Chrome, Research in Motion BlackBerry smart phones, and Apple iPhone. Existing browser definition files have also been updated. For more information, see How to: Upgrade an ASP.NET Web Application to ASP.NET 4 and ASP.NET Web Server Controls and Browser Capabilities. The browser definition files that are included with ASP.NET 4 are shown in the following list: •blackberry.browser •chrome.browser •Default.browser •firefox.browser •gateway.browser •generic.browser •ie.browser •iemobile.browser •iphone.browser •opera.browser •safari.browser A New Way to Define Browser Capabilities ASP.NET 4 includes a new feature referred to as browser capabilities providers. As the name suggests, this lets you build a provider that in turn lets you write custom code to determine browser capabilities. In ASP.NET version 3.5 Service Pack 1, you define browser capabilities in an XML file. This file resides in a machine-level folder or an application-level folder. Most developers do not need to customize these files, but for those who do, the provider approach can be easier than dealing with complex XML syntax. The provider approach makes it possible to simplify the process by implementing a common browser definition syntax, or a database that contains up-to-date browser definitions, or even a Web service for such a database. For more information about the new browser capabilities provider, see the What's New for ASP.NET 4 White Paper. Routing in ASP.NET 4 ASP.NET 4 adds built-in support for routing with Web Forms. Routing is a feature that was introduced with ASP.NET 3.5 SP1 and lets you configure an application to use URLs that are meaningful to users and to search engines because they do not have to specify physical file names. This can make your site more user-friendly and your site content more discoverable by search engines. For example, the URL for a page that displays product categories in your application might look like the following example: http://website/products.aspx?categoryid=12 By using routing, you can use the following URL to render the same information: http://website/products/software The second URL lets the user know what to expect and can result in significantly improved rankings in search engine results. the new features include the following: The PageRouteHandler class is a simple HTTP handler that you use when you define routes. You no longer have to write a custom route handler. The HttpRequest.RequestContext and Page.RouteData properties make it easier to access information that is passed in URL parameters. The RouteUrl expression provides a simple way to create a routed URL in markup. The RouteValue expression provides a simple way to extract URL parameter values in markup. The RouteParameter class makes it easier to pass URL parameter values to a query for a data source control (similar to FormParameter). You no longer have to change the Web.config file to enable routing. For more information about routing, see the following topics: ASP.NET Routing Walkthrough: Using ASP.NET Routing in a Web Forms Application How to: Define Routes for Web Forms Applications How to: Construct URLs from Routes How to: Access URL Parameters in a Routed Page Setting Client IDs The new ClientIDMode property makes it easier to write client script that references HTML elements rendered for server controls. Increasing use of Microsoft Ajax makes the need to do this more common. For example, you may have a data control that renders a long list of products with prices and you want to use client script to make a Web service call and update individual prices in the list as they change without refreshing the entire page. Typically you get a reference to an HTML element in client script by using the document.GetElementById method. You pass to this method the value of the id attribute of the HTML element you want to reference. In the case of elements that are rendered for ASP.NET server controls earlier versions of ASP.NET could make this difficult or impossible. You were not always able to predict what id values ASP.NET would generate, or ASP.NET could generate very long id values. The problem was especially difficult for data controls that would generate multiple rows for a single instance of the control in your markup. ASP.NET 4 adds two new algorithms for generating id attributes. These algorithms can generate id attributes that are easier to work with in client script because they are more predictable and that are easier to work with because they are simpler. For more information about how to use the new algorithms, see the following topics: ASP.NET Web Server Control Identification Walkthrough: Making Data-Bound Controls Easier to Access from JavaScript Walkthrough: Making Controls Located in Web User Controls Easier to Access from JavaScript How to: Access Controls from JavaScript by ID Persisting Row Selection in Data Controls The GridView and ListView controls enable users to select a row. In previous versions of ASP.NET, row selection was based on the row index on the page. For example, if you select the third item on page 1 and then move to page 2, the third item on page 2 is selected. In most cases, is more desirable not to select any rows on page 2. ASP.NET 4 supports Persisted Selection, a new feature that was initially supported only in Dynamic Data projects in the .NET Framework 3.5 SP1. When this feature is enabled, the selected item is based on the row data key. This means that if you select the third row on page 1 and move to page 2, nothing is selected on page 2. When you move back to page 1, the third row is still selected. This is a much more natural behavior than the behavior in earlier versions of ASP.NET. Persisted selection is now supported for the GridView and ListView controls in all projects. You can enable this feature in the GridView control, for example, by setting the EnablePersistedSelection property, as shown in the following example: <asp:GridView id="GridView2" runat="server" PersistedSelection="true"> </asp:GridView> FormView Control Enhancements The FormView control is enhanced to make it easier to style the content of the control with CSS. In previous versions of ASP.NET, the FormView control rendered it contents using an item template. This made styling more difficult in the markup because unexpected table row and table cell tags were rendered by the control. The FormView control supports RenderOuterTable, a property in ASP.NET 4. When this property is set to false, as show in the following example, the table tags are not rendered. This makes it easier to apply CSS style to the contents of the control. <asp:FormView ID="FormView1" runat="server" RenderTable="false"> For more information, see FormView Web Server Control Overview. ListView Control Enhancements The ListView control, which was introduced in ASP.NET 3.5, has all the functionality of the GridView control while giving you complete control over the output. This control has been made easier to use in ASP.NET 4. The earlier version of the control required that you specify a layout template that contained a server control with a known ID. The following markup shows a typical example of how to use the ListView control in ASP.NET 3.5. <asp:ListView ID="ListView1" runat="server"> <LayoutTemplate> <asp:PlaceHolder ID="ItemPlaceHolder" runat="server"></asp:PlaceHolder> </LayoutTemplate> <ItemTemplate> <% Eval("LastName")%> </ItemTemplate> </asp:ListView> In ASP.NET 4, the ListView control does not require a layout template. The markup shown in the previous example can be replaced with the following markup: <asp:ListView ID="ListView1" runat="server"> <ItemTemplate> <% Eval("LastName")%> </ItemTemplate> </asp:ListView> For more information, see ListView Web Server Control Overview. Filtering Data with the QueryExtender Control A very common task for developers who create data-driven Web pages is to filter data. This traditionally has been performed by building Where clauses in data source controls. This approach can be complicated, and in some cases the Where syntax does not let you take advantage of the full functionality of the underlying database. To make filtering easier, a new QueryExtender control has been added in ASP.NET 4. This control can be added to EntityDataSource or LinqDataSource controls in order to filter the data returned by these controls. Because the QueryExtender control relies on LINQ, but you do not to need to know how to write LINQ queries to use the query extender. The QueryExtender control supports a variety of filter options. The following lists QueryExtender filter options. Term Definition SearchExpression Searches a field or fields for string values and compares them to a specified string value. RangeExpression Searches a field or fields for values in a range specified by a pair of values. PropertyExpression Compares a specified value to a property value in a field. If the expression evaluates to true, the data that is being examined is returned. OrderByExpression Sorts data by a specified column and sort direction. CustomExpression Calls a function that defines custom filter in the page. For more information, see QueryExtenderQueryExtender Web Server Control Overview. Enhanced Support for Web Standards and Accessibility Earlier versions of ASP.NET controls sometimes render markup that does not conform to HTML, XHTML, or accessibility standards. ASP.NET 4 eliminates most of these exceptions. For details about how the HTML that is rendered by each control meets accessibility standards, see ASP.NET Controls and Accessibility. CSS for Controls that Can be Disabled In ASP.NET 3.5, when a control is disabled (see WebControl.Enabled), a disabled attribute is added to the rendered HTML element. For example, the following markup creates a Label control that is disabled: <asp:Label id="Label1" runat="server"   Text="Test" Enabled="false" /> In ASP.NET 3.5, the previous control settings generate the following HTML: <span id="Label1" disabled="disabled">Test</span> In HTML 4.01, the disabled attribute is not considered valid on span elements. It is valid only on input elements because it specifies that they cannot be accessed. On display-only elements such as span elements, browsers typically support rendering for a disabled appearance, but a Web page that relies on this non-standard behavior is not robust according to accessibility standards. For display-only elements, you should use CSS to indicate a disabled visual appearance. Therefore, by default ASP.NET 4 generates the following HTML for the control settings shown previously: <span id="Label1" class="aspNetDisabled">Test</span> You can change the value of the class attribute that is rendered by default when a control is disabled by setting the DisabledCssClass property. CSS for Validation Controls In ASP.NET 3.5, validation controls render a default color of red as an inline style. For example, the following markup creates a RequiredFieldValidator control: <asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server"   ErrorMessage="Required Field" ControlToValidate="RadioButtonList1" /> ASP.NET 3.5 renders the following HTML for the validator control: <span id="RequiredFieldValidator1"   style="color:Red;visibility:hidden;">RequiredFieldValidator</span> By default, ASP.NET 4 does not render an inline style to set the color to red. An inline style is used only to hide or show the validator, as shown in the following example: <span id="RequiredFieldValidator1"   style"visibility:hidden;">RequiredFieldValidator</span> Therefore, ASP.NET 4 does not automatically show error messages in red. For information about how to use CSS to specify a visual style for a validation control, see Validating User Input in ASP.NET Web Pages. CSS for the Hidden Fields Div Element ASP.NET uses hidden fields to store state information such as view state and control state. These hidden fields are contained by a div element. In ASP.NET 3.5, this div element does not have a class attribute or an id attribute. Therefore, CSS rules that affect all div elements could unintentionally cause this div to be visible. To avoid this problem, ASP.NET 4 renders the div element for hidden fields with a CSS class that you can use to differentiate the hidden fields div from others. The new classvalue is shown in the following example: <div class="aspNetHidden"> CSS for the Table, Image, and ImageButton Controls By default, in ASP.NET 3.5, some controls set the border attribute of rendered HTML to zero (0). The following example shows HTML that is generated by the Table control in ASP.NET 3.5: <table id="Table2" border="0"> The Image control and the ImageButton control also do this. Because this is not necessary and provides visual formatting information that should be provided by using CSS, the attribute is not generated in ASP.NET 4. CSS for the UpdatePanel and UpdateProgress Controls In ASP.NET 3.5, the UpdatePanel and UpdateProgress controls do not support expando attributes. This makes it impossible to set a CSS class on the HTMLelements that they render. In ASP.NET 4 these controls have been changed to accept expando attributes, as shown in the following example: <asp:UpdatePanel runat="server" class="myStyle"> </asp:UpdatePanel> The following HTML is rendered for this markup: <div id="ctl00_MainContent_UpdatePanel1" class="expandoclass"> </div> Eliminating Unnecessary Outer Tables In ASP.NET 3.5, the HTML that is rendered for the following controls is wrapped in a table element whose purpose is to apply inline styles to the entire control: FormView Login PasswordRecovery ChangePassword If you use templates to customize the appearance of these controls, you can specify CSS styles in the markup that you provide in the templates. In that case, no extra outer table is required. In ASP.NET 4, you can prevent the table from being rendered by setting the new RenderOuterTable property to false. Layout Templates for Wizard Controls In ASP.NET 3.5, the Wizard and CreateUserWizard controls generate an HTML table element that is used for visual formatting. In ASP.NET 4 you can use a LayoutTemplate element to specify the layout. If you do this, the HTML table element is not generated. In the template, you create placeholder controls to indicate where items should be dynamically inserted into the control. (This is similar to how the template model for the ListView control works.) For more information, see the Wizard.LayoutTemplate property. New HTML Formatting Options for the CheckBoxList and RadioButtonList Controls ASP.NET 3.5 uses HTML table elements to format the output for the CheckBoxList and RadioButtonList controls. To provide an alternative that does not use tables for visual formatting, ASP.NET 4 adds two new options to the RepeatLayout enumeration: UnorderedList. This option causes the HTML output to be formatted by using ul and li elements instead of a table. OrderedList. This option causes the HTML output to be formatted by using ol and li elements instead of a table. For examples of HTML that is rendered for the new options, see the RepeatLayout enumeration. Header and Footer Elements for the Table Control In ASP.NET 3.5, the Table control can be configured to render thead and tfoot elements by setting the TableSection property of the TableHeaderRow class and the TableFooterRow class. In ASP.NET 4 these properties are set to the appropriate values by default. CSS and ARIA Support for the Menu Control In ASP.NET 3.5, the Menu control uses HTML table elements for visual formatting, and in some configurations it is not keyboard-accessible. ASP.NET 4 addresses these problems and improves accessibility in the following ways: The generated HTML is structured as an unordered list (ul and li elements). CSS is used for visual formatting. The menu behaves in accordance with ARIA standards for keyboard access. You can use arrow keys to navigate menu items. (For information about ARIA, see Accessibility in Visual Studio and ASP.NET.) ARIA role and property attributes are added to the generated HTML. (Attributes are added by using JavaScript instead of included in the HTML, to avoid generating HTML that would cause markup validation errors.) Styles for the Menu control are rendered in a style block at the top of the page, instead of inline with the rendered HTML elements. If you want to use a separate CSS file so that you can modify the menu styles, you can set the Menu control's new IncludeStyleBlock property to false, in which case the style block is not generated. Valid XHTML for the HtmlForm Control In ASP.NET 3.5, the HtmlForm control (which is created implicitly by the <form runat="server"> tag) renders an HTML form element that has both name and id attributes. The name attribute is deprecated in XHTML 1.1. Therefore, this control does not render the name attribute in ASP.NET 4. Maintaining Backward Compatibility in Control Rendering An existing ASP.NET Web site might have code in it that assumes that controls are rendering HTML the way they do in ASP.NET 3.5. To avoid causing backward compatibility problems when you upgrade the site to ASP.NET 4, you can have ASP.NET continue to generate HTML the way it does in ASP.NET 3.5 after you upgrade the site. To do so, you can set the controlRenderingCompatibilityVersion attribute of the pages element to "3.5" in the Web.config file of an ASP.NET 4 Web site, as shown in the following example: <system.web>   <pages controlRenderingCompatibilityVersion="3.5"/> </system.web> If this setting is omitted, the default value is the same as the version of ASP.NET that the Web site targets. (For information about multi-targeting in ASP.NET, see .NET Framework Multi-Targeting for ASP.NET Web Projects.) ASP.NET MVC ASP.NET MVC helps Web developers build compelling standards-based Web sites that are easy to maintain because it decreases the dependency among application layers by using the Model-View-Controller (MVC) pattern. MVC provides complete control over the page markup. It also improves testability by inherently supporting Test Driven Development (TDD). Web sites created using ASP.NET MVC have a modular architecture. This allows members of a team to work independently on the various modules and can be used to improve collaboration. For example, developers can work on the model and controller layers (data and logic), while the designer work on the view (presentation). For tutorials, walkthroughs, conceptual content, code samples, and a complete API reference, see ASP.NET MVC 2. Dynamic Data Dynamic Data was introduced in the .NET Framework 3.5 SP1 release in mid-2008. This feature provides many enhancements for creating data-driven applications, such as the following: A RAD experience for quickly building a data-driven Web site. Automatic validation that is based on constraints defined in the data model. The ability to easily change the markup that is generated for fields in the GridView and DetailsView controls by using field templates that are part of your Dynamic Data project. For ASP.NET 4, Dynamic Data has been enhanced to give developers even more power for quickly building data-driven Web sites. For more information, see ASP.NET Dynamic Data Content Map. Enabling Dynamic Data for Individual Data-Bound Controls in Existing Web Applications You can use Dynamic Data features in existing ASP.NET Web applications that do not use scaffolding by enabling Dynamic Data for individual data-bound controls. Dynamic Data provides the presentation and data layer support for rendering these controls. When you enable Dynamic Data for data-bound controls, you get the following benefits: Setting default values for data fields. Dynamic Data enables you to provide default values at run time for fields in a data control. Interacting with the database without creating and registering a data model. Automatically validating the data that is entered by the user without writing any code. For more information, see Walkthrough: Enabling Dynamic Data in ASP.NET Data-Bound Controls. New Field Templates for URLs and E-mail Addresses ASP.NET 4 introduces two new built-in field templates, EmailAddress.ascx and Url.ascx. These templates are used for fields that are marked as EmailAddress or Url using the DataTypeAttribute attribute. For EmailAddress objects, the field is displayed as a hyperlink that is created by using the mailto: protocol. When users click the link, it opens the user's e-mail client and creates a skeleton message. Objects typed as Url are displayed as ordinary hyperlinks. The following example shows how to mark fields. [DataType(DataType.EmailAddress)] public object HomeEmail { get; set; } [DataType(DataType.Url)] public object Website { get; set; } Creating Links with the DynamicHyperLink Control Dynamic Data uses the new routing feature that was added in the .NET Framework 3.5 SP1 to control the URLs that users see when they access the Web site. The new DynamicHyperLink control makes it easy to build links to pages in a Dynamic Data site. For information, see How to: Create Table Action Links in Dynamic Data Support for Inheritance in the Data Model Both the ADO.NET Entity Framework and LINQ to SQL support inheritance in their data models. An example of this might be a database that has an InsurancePolicy table. It might also contain CarPolicy and HousePolicy tables that have the same fields as InsurancePolicy and then add more fields. Dynamic Data has been modified to understand inherited objects in the data model and to support scaffolding for the inherited tables. For more information, see Walkthrough: Mapping Table-per-Hierarchy Inheritance in Dynamic Data. Support for Many-to-Many Relationships (Entity Framework Only) The Entity Framework has rich support for many-to-many relationships between tables, which is implemented by exposing the relationship as a collection on an Entity object. New field templates (ManyToMany.ascx and ManyToMany_Edit.ascx) have been added to provide support for displaying and editing data that is involved in many-to-many relationships. For more information, see Working with Many-to-Many Data Relationships in Dynamic Data. New Attributes to Control Display and Support Enumerations The DisplayAttribute has been added to give you additional control over how fields are displayed. The DisplayNameAttribute attribute in earlier versions of Dynamic Data enabled you to change the name that is used as a caption for a field. The new DisplayAttribute class lets you specify more options for displaying a field, such as the order in which a field is displayed and whether a field will be used as a filter. The attribute also provides independent control of the name that is used for the labels in a GridView control, the name that is used in a DetailsView control, the help text for the field, and the watermark used for the field (if the field accepts text input). The EnumDataTypeAttribute class has been added to let you map fields to enumerations. When you apply this attribute to a field, you specify an enumeration type. Dynamic Data uses the new Enumeration.ascx field template to create UI for displaying and editing enumeration values. The template maps the values from the database to the names in the enumeration. Enhanced Support for Filters Dynamic Data 1.0 had built-in filters for Boolean columns and foreign-key columns. The filters did not let you specify the order in which they were displayed. The new DisplayAttribute attribute addresses this by giving you control over whether a column appears as a filter and in what order it will be displayed. An additional enhancement is that filtering support has been rewritten to use the new QueryExtender feature of Web Forms. This lets you create filters without requiring knowledge of the data source control that the filters will be used with. Along with these extensions, filters have also been turned into template controls, which lets you add new ones. Finally, the DisplayAttribute class mentioned earlier allows the default filter to be overridden, in the same way that UIHint allows the default field template for a column to be overridden. For more information, see Walkthrough: Filtering Rows in Tables That Have a Parent-Child Relationship and QueryableFilterRepeater. ASP.NET Chart Control The ASP.NET chart server control enables you to create ASP.NET pages applications that have simple, intuitive charts for complex statistical or financial analysis. The chart control supports the following features: Data series, chart areas, axes, legends, labels, titles, and more. Data binding. Data manipulation, such as copying, splitting, merging, alignment, grouping, sorting, searching, and filtering. Statistical formulas and financial formulas. Advanced chart appearance, such as 3-D, anti-aliasing, lighting, and perspective. Events and customizations. Interactivity and Microsoft Ajax. Support for the Ajax Content Delivery Network (CDN), which provides an optimized way for you to add Microsoft Ajax Library and jQuery scripts to your Web applications. For more information, see Chart Web Server Control Overview. Visual Web Developer Enhancements The following sections provide information about enhancements and new features in Visual Studio 2010 and Visual Web Developer Express. The Web page designer in Visual Studio 2010 has been enhanced for better CSS compatibility, includes additional support for HTML and ASP.NET markup snippets, and features a redesigned version of IntelliSense for JScript. Improved CSS Compatibility The Visual Web Developer designer in Visual Studio 2010 has been updated to improve CSS 2.1 standards compliance. The designer better preserves HTML source code and is more robust than in previous versions of Visual Studio. HTML and JScript Snippets In the HTML editor, IntelliSense auto-completes tag names. The IntelliSense Snippets feature auto-completes whole tags and more. In Visual Studio 2010, IntelliSense snippets are supported for JScript, alongside C# and Visual Basic, which were supported in earlier versions of Visual Studio. Visual Studio 2010 includes over 200 snippets that help you auto-complete common ASP.NET and HTML tags, including required attributes (such as runat="server") and common attributes specific to a tag (such as ID, DataSourceID, ControlToValidate, and Text). You can download additional snippets, or you can write your own snippets that encapsulate the blocks of markup that you or your team use for common tasks. For more information on HTML snippets, see Walkthrough: Using HTML Snippets. JScript IntelliSense Enhancements In Visual 2010, JScript IntelliSense has been redesigned to provide an even richer editing experience. IntelliSense now recognizes objects that have been dynamically generated by methods such as registerNamespace and by similar techniques used by other JavaScript frameworks. Performance has been improved to analyze large libraries of script and to display IntelliSense with little or no processing delay. Compatibility has been significantly increased to support almost all third-party libraries and to support diverse coding styles. Documentation comments are now parsed as you type and are immediately leveraged by IntelliSense. Web Application Deployment with Visual Studio 2010 For Web application projects, Visual Studio now provides tools that work with the IIS Web Deployment Tool (Web Deploy) to automate many processes that had to be done manually in earlier versions of ASP.NET. For example, the following tasks can now be automated: Creating an IIS application on the destination computer and configuring IIS settings. Copying files to the destination computer. Changing Web.config settings that must be different in the destination environment. Propagating changes to data or data structures in SQL Server databases that are used by the Web application. For more information about Web application deployment, see ASP.NET Deployment Content Map. Enhancements to ASP.NET Multi-Targeting ASP.NET 4 adds new features to the multi-targeting feature to make it easier to work with projects that target earlier versions of the .NET Framework. Multi-targeting was introduced in ASP.NET 3.5 to enable you to use the latest version of Visual Studio without having to upgrade existing Web sites or Web services to the latest version of the .NET Framework. In Visual Studio 2008, when you work with a project targeted for an earlier version of the .NET Framework, most features of the development environment adapt to the targeted version. However, IntelliSense displays language features that are available in the current version, and property windows display properties available in the current version. In Visual Studio 2010, only language features and properties available in the targeted version of the .NET Framework are shown. For more information about multi-targeting, see the following topics: .NET Framework Multi-Targeting for ASP.NET Web Projects ASP.NET Side-by-Side Execution Overview How to: Host Web Applications That Use Different Versions of the .NET Framework on the Same Server How to: Deploy Web Site Projects Targeted for Earlier Versions of the .NET Framework

  Read the article

• An Introduction to ASP.NET Web API

  - by Rick Strahl

  Microsoft recently released ASP.NET MVC 4.0 and .NET 4.5 and along with it, the brand spanking new ASP.NET Web API. Web API is an exciting new addition to the ASP.NET stack that provides a new, well-designed HTTP framework for creating REST and AJAX APIs (API is Microsoft’s new jargon for a service, in case you’re wondering). Although Web API ships and installs with ASP.NET MVC 4, you can use Web API functionality in any ASP.NET project, including WebForms, WebPages and MVC or just a Web API by itself. And you can also self-host Web API in your own applications from Console, Desktop or Service applications. If you're interested in a high level overview on what ASP.NET Web API is and how it fits into the ASP.NET stack you can check out my previous post: Where does ASP.NET Web API fit? In the following article, I'll focus on a practical, by example introduction to ASP.NET Web API. All the code discussed in this article is available in GitHub: https://github.com/RickStrahl/AspNetWebApiArticle [republished from my Code Magazine Article and updated for RTM release of ASP.NET Web API] Getting Started To start I’ll create a new empty ASP.NET application to demonstrate that Web API can work with any kind of ASP.NET project. Although you can create a new project based on the ASP.NET MVC/Web API template to quickly get up and running, I’ll take you through the manual setup process, because one common use case is to add Web API functionality to an existing ASP.NET application. This process describes the steps needed to hook up Web API to any ASP.NET 4.0 application. Start by creating an ASP.NET Empty Project. Then create a new folder in the project called Controllers. Add a Web API Controller Class Once you have any kind of ASP.NET project open, you can add a Web API Controller class to it. Web API Controllers are very similar to MVC Controller classes, but they work in any kind of project. Add a new item to this folder by using the Add New Item option in Visual Studio and choose Web API Controller Class, as shown in Figure 1. Figure 1: This is how you create a new Controller Class in Visual Studio   Make sure that the name of the controller class includes Controller at the end of it, which is required in order for Web API routing to find it. Here, the name for the class is AlbumApiController. For this example, I’ll use a Music Album model to demonstrate basic behavior of Web API. The model consists of albums and related songs where an album has properties like Name, Artist and YearReleased and a list of songs with a SongName and SongLength as well as an AlbumId that links it to the album. You can find the code for the model (and the rest of these samples) on Github. To add the file manually, create a new folder called Model, and add a new class Album.cs and copy the code into it. There’s a static AlbumData class with a static CreateSampleAlbumData() method that creates a short list of albums on a static .Current that I’ll use for the examples. Before we look at what goes into the controller class though, let’s hook up routing so we can access this new controller. Hooking up Routing in Global.asax To start, I need to perform the one required configuration task in order for Web API to work: I need to configure routing to the controller. Like MVC, Web API uses routing to provide clean, extension-less URLs to controller methods. Using an extension method to ASP.NET’s static RouteTable class, you can use the MapHttpRoute() (in the System.Web.Http namespace) method to hook-up the routing during Application_Start in global.asax.cs shown in Listing 1.using System; using System.Web.Routing; using System.Web.Http; namespace AspNetWebApi { public class Global : System.Web.HttpApplication { protected void Application_Start(object sender, EventArgs e) { RouteTable.Routes.MapHttpRoute( name: "AlbumVerbs", routeTemplate: "albums/{title}", defaults: new { symbol = RouteParameter.Optional, controller="AlbumApi" } ); } } } This route configures Web API to direct URLs that start with an albums folder to the AlbumApiController class. Routing in ASP.NET is used to create extensionless URLs and allows you to map segments of the URL to specific Route Value parameters. A route parameter, with a name inside curly brackets like {name}, is mapped to parameters on the controller methods. Route parameters can be optional, and there are two special route parameters – controller and action – that determine the controller to call and the method to activate respectively. HTTP Verb Routing Routing in Web API can route requests by HTTP Verb in addition to standard {controller},{action} routing. For the first examples, I use HTTP Verb routing, as shown Listing 1. Notice that the route I’ve defined does not include an {action} route value or action value in the defaults. Rather, Web API can use the HTTP Verb in this route to determine the method to call the controller, and a GET request maps to any method that starts with Get. So methods called Get() or GetAlbums() are matched by a GET request and a POST request maps to a Post() or PostAlbum(). Web API matches a method by name and parameter signature to match a route, query string or POST values. In lieu of the method name, the [HttpGet,HttpPost,HttpPut,HttpDelete, etc] attributes can also be used to designate the accepted verbs explicitly if you don’t want to follow the verb naming conventions. Although HTTP Verb routing is a good practice for REST style resource APIs, it’s not required and you can still use more traditional routes with an explicit {action} route parameter. When {action} is supplied, the HTTP verb routing is ignored. I’ll talk more about alternate routes later. When you’re finished with initial creation of files, your project should look like Figure 2.   Figure 2: The initial project has the new API Controller Album model   Creating a small Album Model Now it’s time to create some controller methods to serve data. For these examples, I’ll use a very simple Album and Songs model to play with, as shown in Listing 2. public class Song { public string AlbumId { get; set; } [Required, StringLength(80)] public string SongName { get; set; } [StringLength(5)] public string SongLength { get; set; } } public class Album { public string Id { get; set; } [Required, StringLength(80)] public string AlbumName { get; set; } [StringLength(80)] public string Artist { get; set; } public int YearReleased { get; set; } public DateTime Entered { get; set; } [StringLength(150)] public string AlbumImageUrl { get; set; } [StringLength(200)] public string AmazonUrl { get; set; } public virtual List<Song> Songs { get; set; } public Album() { Songs = new List<Song>(); Entered = DateTime.Now; // Poor man's unique Id off GUID hash Id = Guid.NewGuid().GetHashCode().ToString("x"); } public void AddSong(string songName, string songLength = null) { this.Songs.Add(new Song() { AlbumId = this.Id, SongName = songName, SongLength = songLength }); } } Once the model has been created, I also added an AlbumData class that generates some static data in memory that is loaded onto a static .Current member. The signature of this class looks like this and that's what I'll access to retrieve the base data:public static class AlbumData { // sample data - static list public static List<Album> Current = CreateSampleAlbumData(); /// <summary> /// Create some sample data /// </summary> /// <returns></returns> public static List<Album> CreateSampleAlbumData() { … }} You can check out the full code for the data generation online. Creating an AlbumApiController Web API shares many concepts of ASP.NET MVC, and the implementation of your API logic is done by implementing a subclass of the System.Web.Http.ApiController class. Each public method in the implemented controller is a potential endpoint for the HTTP API, as long as a matching route can be found to invoke it. The class name you create should end in Controller, which is how Web API matches the controller route value to figure out which class to invoke. Inside the controller you can implement methods that take standard .NET input parameters and return .NET values as results. Web API’s binding tries to match POST data, route values, form values or query string values to your parameters. Because the controller is configured for HTTP Verb based routing (no {action} parameter in the route), any methods that start with Getxxxx() are called by an HTTP GET operation. You can have multiple methods that match each HTTP Verb as long as the parameter signatures are different and can be matched by Web API. In Listing 3, I create an AlbumApiController with two methods to retrieve a list of albums and a single album by its title .public class AlbumApiController : ApiController { public IEnumerable<Album> GetAlbums() { var albums = AlbumData.Current.OrderBy(alb => alb.Artist); return albums; } public Album GetAlbum(string title) { var album = AlbumData.Current .SingleOrDefault(alb => alb.AlbumName.Contains(title)); return album; }} To access the first two requests, you can use the following URLs in your browser: http://localhost/aspnetWebApi/albumshttp://localhost/aspnetWebApi/albums/Dirty%20Deeds Note that you’re not specifying the actions of GetAlbum or GetAlbums in these URLs. Instead Web API’s routing uses HTTP GET verb to route to these methods that start with Getxxx() with the first mapping to the parameterless GetAlbums() method and the latter to the GetAlbum(title) method that receives the title parameter mapped as optional in the route. Content Negotiation When you access any of the URLs above from a browser, you get either an XML or JSON result returned back. The album list result for Chrome 17 and Internet Explorer 9 is shown Figure 3. Figure 3: Web API responses can vary depending on the browser used, demonstrating Content Negotiation in action as these two browsers send different HTTP Accept headers.   Notice that the results are not the same: Chrome returns an XML response and IE9 returns a JSON response. Whoa, what’s going on here? Shouldn’t we see the same result in both browsers? Actually, no. Web API determines what type of content to return based on Accept headers. HTTP clients, like browsers, use Accept headers to specify what kind of content they’d like to see returned. Browsers generally ask for HTML first, followed by a few additional content types. Chrome (and most other major browsers) ask for: Accept: text/html, application/xhtml+xml,application/xml; q=0.9,*/*;q=0.8 IE9 asks for: Accept: text/html, application/xhtml+xml, */* Note that Chrome’s Accept header includes application/xml, which Web API finds in its list of supported media types and returns an XML response. IE9 does not include an Accept header type that works on Web API by default, and so it returns the default format, which is JSON. This is an important and very useful feature that was missing from any previous Microsoft REST tools: Web API automatically switches output formats based on HTTP Accept headers. Nowhere in the server code above do you have to explicitly specify the output format. Rather, Web API determines what format the client is requesting based on the Accept headers and automatically returns the result based on the available formatters. This means that a single method can handle both XML and JSON results.. Using this simple approach makes it very easy to create a single controller method that can return JSON, XML, ATOM or even OData feeds by providing the appropriate Accept header from the client. By default you don’t have to worry about the output format in your code. Note that you can still specify an explicit output format if you choose, either globally by overriding the installed formatters, or individually by returning a lower level HttpResponseMessage instance and setting the formatter explicitly. More on that in a minute. Along the same lines, any content sent to the server via POST/PUT is parsed by Web API based on the HTTP Content-type of the data sent. The same formats allowed for output are also allowed on input. Again, you don’t have to do anything in your code – Web API automatically performs the deserialization from the content. Accessing Web API JSON Data with jQuery A very common scenario for Web API endpoints is to retrieve data for AJAX calls from the Web browser. Because JSON is the default format for Web API, it’s easy to access data from the server using jQuery and its getJSON() method. This example receives the albums array from GetAlbums() and databinds it into the page using knockout.js.$.getJSON("albums/", function (albums) { // make knockout template visible $(".album").show(); // create view object and attach array var view = { albums: albums }; ko.applyBindings(view); }); Figure 4 shows this and the next example’s HTML output. You can check out the complete HTML and script code at http://goo.gl/Ix33C (.html) and http://goo.gl/tETlg (.js). Figu Figure 4: The Album Display sample uses JSON data loaded from Web API.   The result from the getJSON() call is a JavaScript object of the server result, which comes back as a JavaScript array. In the code, I use knockout.js to bind this array into the UI, which as you can see, requires very little code, instead using knockout’s data-bind attributes to bind server data to the UI. Of course, this is just one way to use the data – it’s entirely up to you to decide what to do with the data in your client code. Along the same lines, I can retrieve a single album to display when the user clicks on an album. The response returns the album information and a child array with all the songs. The code to do this is very similar to the last example where we pulled the albums array:$(".albumlink").live("click", function () { var id = $(this).data("id"); // title $.getJSON("albums/" + id, function (album) { ko.applyBindings(album, $("#divAlbumDialog")[0]); $("#divAlbumDialog").show(); }); }); Here the URL looks like this: /albums/Dirty%20Deeds, where the title is the ID captured from the clicked element’s data ID attribute. Explicitly Overriding Output Format When Web API automatically converts output using content negotiation, it does so by matching Accept header media types to the GlobalConfiguration.Configuration.Formatters and the SupportedMediaTypes of each individual formatter. You can add and remove formatters to globally affect what formats are available and it’s easy to create and plug in custom formatters.The example project includes a JSONP formatter that can be plugged in to provide JSONP support for requests that have a callback= querystring parameter. Adding, removing or replacing formatters is a global option you can use to manipulate content. It’s beyond the scope of this introduction to show how it works, but you can review the sample code or check out my blog entry on the subject (http://goo.gl/UAzaR). If automatic processing is not desirable in a particular Controller method, you can override the response output explicitly by returning an HttpResponseMessage instance. HttpResponseMessage is similar to ActionResult in ASP.NET MVC in that it’s a common way to return an abstract result message that contains content. HttpResponseMessage s parsed by the Web API framework using standard interfaces to retrieve the response data, status code, headers and so on[MS2] . Web API turns every response – including those Controller methods that return static results – into HttpResponseMessage instances. Explicitly returning an HttpResponseMessage instance gives you full control over the output and lets you mostly bypass WebAPI’s post-processing of the HTTP response on your behalf. HttpResponseMessage allows you to customize the response in great detail. Web API’s attention to detail in the HTTP spec really shows; many HTTP options are exposed as properties and enumerations with detailed IntelliSense comments. Even if you’re new to building REST-based interfaces, the API guides you in the right direction for returning valid responses and response codes. For example, assume that I always want to return JSON from the GetAlbums() controller method and ignore the default media type content negotiation. To do this, I can adjust the output format and headers as shown in Listing 4.public HttpResponseMessage GetAlbums() { var albums = AlbumData.Current.OrderBy(alb => alb.Artist); // Create a new HttpResponse with Json Formatter explicitly var resp = new HttpResponseMessage(HttpStatusCode.OK); resp.Content = new ObjectContent<IEnumerable<Album>>( albums, new JsonMediaTypeFormatter()); // Get Default Formatter based on Content Negotiation //var resp = Request.CreateResponse<IEnumerable<Album>>(HttpStatusCode.OK, albums); resp.Headers.ConnectionClose = true; resp.Headers.CacheControl = new CacheControlHeaderValue(); resp.Headers.CacheControl.Public = true; return resp; } This example returns the same IEnumerable<Album> value, but it wraps the response into an HttpResponseMessage so you can control the entire HTTP message result including the headers, formatter and status code. In Listing 4, I explicitly specify the formatter using the JsonMediaTypeFormatter to always force the content to JSON.  If you prefer to use the default content negotiation with HttpResponseMessage results, you can create the Response instance using the Request.CreateResponse method:var resp = Request.CreateResponse<IEnumerable<Album>>(HttpStatusCode.OK, albums); This provides you an HttpResponse object that's pre-configured with the default formatter based on Content Negotiation. Once you have an HttpResponse object you can easily control most HTTP aspects on this object. What's sweet here is that there are many more detailed properties on HttpResponse than the core ASP.NET Response object, with most options being explicitly configurable with enumerations that make it easy to pick the right headers and response codes from a list of valid codes. It makes HTTP features available much more discoverable even for non-hardcore REST/HTTP geeks. Non-Serialized Results The output returned doesn’t have to be a serialized value but can also be raw data, like strings, binary data or streams. You can use the HttpResponseMessage.Content object to set a number of common Content classes. Listing 5 shows how to return a binary image using the ByteArrayContent class from a Controller method. [HttpGet] public HttpResponseMessage AlbumArt(string title) { var album = AlbumData.Current.FirstOrDefault(abl => abl.AlbumName.StartsWith(title)); if (album == null) { var resp = Request.CreateResponse<ApiMessageError>( HttpStatusCode.NotFound, new ApiMessageError("Album not found")); return resp; } // kinda silly - we would normally serve this directly // but hey - it's a demo. var http = new WebClient(); var imageData = http.DownloadData(album.AlbumImageUrl); // create response and return var result = new HttpResponseMessage(HttpStatusCode.OK); result.Content = new ByteArrayContent(imageData); result.Content.Headers.ContentType = new MediaTypeHeaderValue("image/jpeg"); return result; } The image retrieval from Amazon is contrived, but it shows how to return binary data using ByteArrayContent. It also demonstrates that you can easily return multiple types of content from a single controller method, which is actually quite common. If an error occurs - such as a resource can’t be found or a validation error – you can return an error response to the client that’s very specific to the error. In GetAlbumArt(), if the album can’t be found, we want to return a 404 Not Found status (and realistically no error, as it’s an image). Note that if you are not using HTTP Verb-based routing or not accessing a method that starts with Get/Post etc., you have to specify one or more HTTP Verb attributes on the method explicitly. Here, I used the [HttpGet] attribute to serve the image. Another option to handle the error could be to return a fixed placeholder image if no album could be matched or the album doesn’t have an image. When returning an error code, you can also return a strongly typed response to the client. For example, you can set the 404 status code and also return a custom error object (ApiMessageError is a class I defined) like this:return Request.CreateResponse<ApiMessageError>( HttpStatusCode.NotFound, new ApiMessageError("Album not found") );   If the album can be found, the image will be returned. The image is downloaded into a byte[] array, and then assigned to the result’s Content property. I created a new ByteArrayContent instance and assigned the image’s bytes and the content type so that it displays properly in the browser. There are other content classes available: StringContent, StreamContent, ByteArrayContent, MultipartContent, and ObjectContent are at your disposal to return just about any kind of content. You can create your own Content classes if you frequently return custom types and handle the default formatter assignments that should be used to send the data out . Although HttpResponseMessage results require more code than returning a plain .NET value from a method, it allows much more control over the actual HTTP processing than automatic processing. It also makes it much easier to test your controller methods as you get a response object that you can check for specific status codes and output messages rather than just a result value. Routing Again Ok, let’s get back to the image example. Using the original routing we have setup using HTTP Verb routing there's no good way to serve the image. In order to return my album art image I’d like to use a URL like this: http://localhost/aspnetWebApi/albums/Dirty%20Deeds/image In order to create a URL like this, I have to create a new Controller because my earlier routes pointed to the AlbumApiController using HTTP Verb routing. HTTP Verb based routing is great for representing a single set of resources such as albums. You can map operations like add, delete, update and read easily using HTTP Verbs. But you cannot mix action based routing into a an HTTP Verb routing controller - you can only map HTTP Verbs and each method has to be unique based on parameter signature. You can't have multiple GET operations to methods with the same signature. So GetImage(string id) and GetAlbum(string title) are in conflict in an HTTP GET routing scenario. In fact, I was unable to make the above Image URL work with any combination of HTTP Verb plus Custom routing using the single Albums controller. There are number of ways around this, but all involve additional controllers.  Personally, I think it’s easier to use explicit Action routing and then add custom routes if you need to simplify your URLs further. So in order to accommodate some of the other examples, I created another controller – AlbumRpcApiController – to handle all requests that are explicitly routed via actions (/albums/rpc/AlbumArt) or are custom routed with explicit routes defined in the HttpConfiguration. I added the AlbumArt() method to this new AlbumRpcApiController class. For the image URL to work with the new AlbumRpcApiController, you need a custom route placed before the default route from Listing 1.RouteTable.Routes.MapHttpRoute( name: "AlbumRpcApiAction", routeTemplate: "albums/rpc/{action}/{title}", defaults: new { title = RouteParameter.Optional, controller = "AlbumRpcApi", action = "GetAblums" } ); Now I can use either of the following URLs to access the image: Custom route: (/albums/rpc/{title}/image)http://localhost/aspnetWebApi/albums/PowerAge/image Action route: (/albums/rpc/action/{title})http://localhost/aspnetWebAPI/albums/rpc/albumart/PowerAge Sending Data to the Server To send data to the server and add a new album, you can use an HTTP POST operation. Since I’m using HTTP Verb-based routing in the original AlbumApiController, I can implement a method called PostAlbum()to accept a new album from the client. Listing 6 shows the Web API code to add a new album.public HttpResponseMessage PostAlbum(Album album) { if (!this.ModelState.IsValid) { // my custom error class var error = new ApiMessageError() { message = "Model is invalid" }; // add errors into our client error model for client foreach (var prop in ModelState.Values) { var modelError = prop.Errors.FirstOrDefault(); if (!string.IsNullOrEmpty(modelError.ErrorMessage)) error.errors.Add(modelError.ErrorMessage); else error.errors.Add(modelError.Exception.Message); } return Request.CreateResponse<ApiMessageError>(HttpStatusCode.Conflict, error); } // update song id which isn't provided foreach (var song in album.Songs) song.AlbumId = album.Id; // see if album exists already var matchedAlbum = AlbumData.Current .SingleOrDefault(alb => alb.Id == album.Id || alb.AlbumName == album.AlbumName); if (matchedAlbum == null) AlbumData.Current.Add(album); else matchedAlbum = album; // return a string to show that the value got here var resp = Request.CreateResponse(HttpStatusCode.OK, string.Empty); resp.Content = new StringContent(album.AlbumName + " " + album.Entered.ToString(), Encoding.UTF8, "text/plain"); return resp; } The PostAlbum() method receives an album parameter, which is automatically deserialized from the POST buffer the client sent. The data passed from the client can be either XML or JSON. Web API automatically figures out what format it needs to deserialize based on the content type and binds the content to the album object. Web API uses model binding to bind the request content to the parameter(s) of controller methods. Like MVC you can check the model by looking at ModelState.IsValid. If it’s not valid, you can run through the ModelState.Values collection and check each binding for errors. Here I collect the error messages into a string array that gets passed back to the client via the result ApiErrorMessage object. When a binding error occurs, you’ll want to return an HTTP error response and it’s best to do that with an HttpResponseMessage result. In Listing 6, I used a custom error class that holds a message and an array of detailed error messages for each binding error. I used this object as the content to return to the client along with my Conflict HTTP Status Code response. If binding succeeds, the example returns a string with the name and date entered to demonstrate that you captured the data. Normally, a method like this should return a Boolean or no response at all (HttpStatusCode.NoConent). The sample uses a simple static list to hold albums, so once you’ve added the album using the Post operation, you can hit the /albums/ URL to see that the new album was added. The client jQuery code to call the POST operation from the client with jQuery is shown in Listing 7. var id = new Date().getTime().toString(); var album = { "Id": id, "AlbumName": "Power Age", "Artist": "AC/DC", "YearReleased": 1977, "Entered": "2002-03-11T18:24:43.5580794-10:00", "AlbumImageUrl": http://ecx.images-amazon.com/images/…, "AmazonUrl": http://www.amazon.com/…, "Songs": [ { "SongName": "Rock 'n Roll Damnation", "SongLength": 3.12}, { "SongName": "Downpayment Blues", "SongLength": 4.22 }, { "SongName": "Riff Raff", "SongLength": 2.42 } ] } $.ajax( { url: "albums/", type: "POST", contentType: "application/json", data: JSON.stringify(album), processData: false, beforeSend: function (xhr) { // not required since JSON is default output xhr.setRequestHeader("Accept", "application/json"); }, success: function (result) { // reload list of albums page.loadAlbums(); }, error: function (xhr, status, p3, p4) { var err = "Error"; if (xhr.responseText && xhr.responseText[0] == "{") err = JSON.parse(xhr.responseText).message; alert(err); } }); The code in Listing 7 creates an album object in JavaScript to match the structure of the .NET Album class. This object is passed to the $.ajax() function to send to the server as POST. The data is turned into JSON and the content type set to application/json so that the server knows what to convert when deserializing in the Album instance. The jQuery code hooks up success and failure events. Success returns the result data, which is a string that’s echoed back with an alert box. If an error occurs, jQuery returns the XHR instance and status code. You can check the XHR to see if a JSON object is embedded and if it is, you can extract it by de-serializing it and accessing the .message property. REST standards suggest that updates to existing resources should use PUT operations. REST standards aside, I’m not a big fan of separating out inserts and updates so I tend to have a single method that handles both. But if you want to follow REST suggestions, you can create a PUT method that handles updates by forwarding the PUT operation to the POST method:public HttpResponseMessage PutAlbum(Album album) { return PostAlbum(album); } To make the corresponding $.ajax() call, all you have to change from Listing 7 is the type: from POST to PUT. Model Binding with UrlEncoded POST Variables In the example in Listing 7 I used JSON objects to post a serialized object to a server method that accepted an strongly typed object with the same structure, which is a common way to send data to the server. However, Web API supports a number of different ways that data can be received by server methods. For example, another common way is to use plain UrlEncoded POST  values to send to the server. Web API supports Model Binding that works similar (but not the same) as MVC's model binding where POST variables are mapped to properties of object parameters of the target method. This is actually quite common for AJAX calls that want to avoid serialization and the potential requirement of a JSON parser on older browsers. For example, using jQUery you might use the $.post() method to send a new album to the server (albeit one without songs) using code like the following:$.post("albums/",{AlbumName: "Dirty Deeds", YearReleased: 1976 … },albumPostCallback); Although the code looks very similar to the client code we used before passing JSON, here the data passed is URL encoded values (AlbumName=Dirty+Deeds&YearReleased=1976 etc.). Web API then takes this POST data and maps each of the POST values to the properties of the Album object in the method's parameter. Although the client code is different the server can both handle the JSON object, or the UrlEncoded POST values. Dynamic Access to POST Data There are also a few options available to dynamically access POST data, if you know what type of data you're dealing with. If you have POST UrlEncoded values, you can dynamically using a FormsDataCollection:[HttpPost] public string PostAlbum(FormDataCollection form) { return string.Format("{0} - released {1}", form.Get("AlbumName"),form.Get("RearReleased")); } The FormDataCollection is a very simple object, that essentially provides the same functionality as Request.Form[] in ASP.NET. Request.Form[] still works if you're running hosted in an ASP.NET application. However as a general rule, while ASP.NET's functionality is always available when running Web API hosted inside of an  ASP.NET application, using the built in classes specific to Web API makes it possible to run Web API applications in a self hosted environment outside of ASP.NET. If your client is sending JSON to your server, and you don't want to map the JSON to a strongly typed object because you only want to retrieve a few simple values, you can also accept a JObject parameter in your API methods:[HttpPost] public string PostAlbum(JObject jsonData) { dynamic json = jsonData; JObject jalbum = json.Album; JObject juser = json.User; string token = json.UserToken; var album = jalbum.ToObject<Album>(); var user = juser.ToObject<User>(); return String.Format("{0} {1} {2}", album.AlbumName, user.Name, token); } There quite a few options available to you to receive data with Web API, which gives you more choices for the right tool for the job. Unfortunately one shortcoming of Web API is that POST data is always mapped to a single parameter. This means you can't pass multiple POST parameters to methods that receive POST data. It's possible to accept multiple parameters, but only one can map to the POST content - the others have to come from the query string or route values. I have a couple of Blog POSTs that explain what works and what doesn't here: Passing multiple POST parameters to Web API Controller Methods Mapping UrlEncoded POST Values in ASP.NET Web API   Handling Delete Operations Finally, to round out the server API code of the album example we've been discussin, here’s the DELETE verb controller method that allows removal of an album by its title:public HttpResponseMessage DeleteAlbum(string title) { var matchedAlbum = AlbumData.Current.Where(alb => alb.AlbumName == title) .SingleOrDefault(); if (matchedAlbum == null) return new HttpResponseMessage(HttpStatusCode.NotFound); AlbumData.Current.Remove(matchedAlbum); return new HttpResponseMessage(HttpStatusCode.NoContent); } To call this action method using jQuery, you can use:$(".removeimage").live("click", function () { var $el = $(this).parent(".album"); var txt = $el.find("a").text(); $.ajax({ url: "albums/" + encodeURIComponent(txt), type: "Delete", success: function (result) { $el.fadeOut().remove(); }, error: jqError }); }   Note the use of the DELETE verb in the $.ajax() call, which routes to DeleteAlbum on the server. DELETE is a non-content operation, so you supply a resource ID (the title) via route value or the querystring. Routing Conflicts In all requests with the exception of the AlbumArt image example shown so far, I used HTTP Verb routing that I set up in Listing 1. HTTP Verb Routing is a recommendation that is in line with typical REST access to HTTP resources. However, it takes quite a bit of effort to create REST-compliant API implementations based only on HTTP Verb routing only. You saw one example that didn’t really fit – the return of an image where I created a custom route albums/{title}/image that required creation of a second controller and a custom route to work. HTTP Verb routing to a controller does not mix with custom or action routing to the same controller because of the limited mapping of HTTP verbs imposed by HTTP Verb routing. To understand some of the problems with verb routing, let’s look at another example. Let’s say you create a GetSortableAlbums() method like this and add it to the original AlbumApiController accessed via HTTP Verb routing:[HttpGet] public IQueryable<Album> SortableAlbums() { var albums = AlbumData.Current; // generally should be done only on actual queryable results (EF etc.) // Done here because we're running with a static list but otherwise might be slow return albums.AsQueryable(); } If you compile this code and try to now access the /albums/ link, you get an error: Multiple Actions were found that match the request. HTTP Verb routing only allows access to one GET operation per parameter/route value match. If more than one method exists with the same parameter signature, it doesn’t work. As I mentioned earlier for the image display, the only solution to get this method to work is to throw it into another controller. Because I already set up the AlbumRpcApiController I can add the method there. First, I should rename the method to SortableAlbums() so I’m not using a Get prefix for the method. This also makes the action parameter look cleaner in the URL - it looks less like a method and more like a noun. I can then create a new route that handles direct-action mapping:RouteTable.Routes.MapHttpRoute( name: "AlbumRpcApiAction", routeTemplate: "albums/rpc/{action}/{title}", defaults: new { title = RouteParameter.Optional, controller = "AlbumRpcApi", action = "GetAblums" } ); As I am explicitly adding a route segment – rpc – into the route template, I can now reference explicit methods in the Web API controller using URLs like this: http://localhost/AspNetWebApi/rpc/SortableAlbums Error Handling I’ve already done some minimal error handling in the examples. For example in Listing 6, I detected some known-error scenarios like model validation failing or a resource not being found and returning an appropriate HttpResponseMessage result. But what happens if your code just blows up or causes an exception? If you have a controller method, like this:[HttpGet] public void ThrowException() { throw new UnauthorizedAccessException("Unauthorized Access Sucka"); } You can call it with this: http://localhost/AspNetWebApi/albums/rpc/ThrowException The default exception handling displays a 500-status response with the serialized exception on the local computer only. When you connect from a remote computer, Web API throws back a 500  HTTP Error with no data returned (IIS then adds its HTML error page). The behavior is configurable in the GlobalConfiguration:GlobalConfiguration .Configuration .IncludeErrorDetailPolicy = IncludeErrorDetailPolicy.Never; If you want more control over your error responses sent from code, you can throw explicit error responses yourself using HttpResponseException. When you throw an HttpResponseException the response parameter is used to generate the output for the Controller action. [HttpGet] public void ThrowError() { var resp = Request.CreateResponse<ApiMessageError>( HttpStatusCode.BadRequest, new ApiMessageError("Your code stinks!")); throw new HttpResponseException(resp); } Throwing an HttpResponseException stops the processing of the controller method and immediately returns the response you passed to the exception. Unlike other Exceptions fired inside of WebAPI, HttpResponseException bypasses the Exception Filters installed and instead just outputs the response you provide. In this case, the serialized ApiMessageError result string is returned in the default serialization format – XML or JSON. You can pass any content to HttpResponseMessage, which includes creating your own exception objects and consistently returning error messages to the client. Here’s a small helper method on the controller that you might use to send exception info back to the client consistently:private void ThrowSafeException(string message, HttpStatusCode statusCode = HttpStatusCode.BadRequest) { var errResponse = Request.CreateResponse<ApiMessageError>(statusCode, new ApiMessageError() { message = message }); throw new HttpResponseException(errResponse); } You can then use it to output any captured errors from code:[HttpGet] public void ThrowErrorSafe() { try { List<string> list = null; list.Add("Rick"); } catch (Exception ex) { ThrowSafeException(ex.Message); } }   Exception Filters Another more global solution is to create an Exception Filter. Filters in Web API provide the ability to pre- and post-process controller method operations. An exception filter looks at all exceptions fired and then optionally creates an HttpResponseMessage result. Listing 8 shows an example of a basic Exception filter implementation.public class UnhandledExceptionFilter : ExceptionFilterAttribute { public override void OnException(HttpActionExecutedContext context) { HttpStatusCode status = HttpStatusCode.InternalServerError; var exType = context.Exception.GetType(); if (exType == typeof(UnauthorizedAccessException)) status = HttpStatusCode.Unauthorized; else if (exType == typeof(ArgumentException)) status = HttpStatusCode.NotFound; var apiError = new ApiMessageError() { message = context.Exception.Message }; // create a new response and attach our ApiError object // which now gets returned on ANY exception result var errorResponse = context.Request.CreateResponse<ApiMessageError>(status, apiError); context.Response = errorResponse; base.OnException(context); } } Exception Filter Attributes can be assigned to an ApiController class like this:[UnhandledExceptionFilter] public class AlbumRpcApiController : ApiController or you can globally assign it to all controllers by adding it to the HTTP Configuration's Filters collection:GlobalConfiguration.Configuration.Filters.Add(new UnhandledExceptionFilter()); The latter is a great way to get global error trapping so that all errors (short of hard IIS errors and explicit HttpResponseException errors) return a valid error response that includes error information in the form of a known-error object. Using a filter like this allows you to throw an exception as you normally would and have your filter create a response in the appropriate output format that the client expects. For example, an AJAX application can on failure expect to see a JSON error result that corresponds to the real error that occurred rather than a 500 error along with HTML error page that IIS throws up. You can even create some custom exceptions so you can differentiate your own exceptions from unhandled system exceptions - you often don't want to display error information from 'unknown' exceptions as they may contain sensitive system information or info that's not generally useful to users of your application/site. This is just one example of how ASP.NET Web API is configurable and extensible. Exception filters are just one example of how you can plug-in into the Web API request flow to modify output. Many more hooks exist and I’ll take a closer look at extensibility in Part 2 of this article in the future. Summary Web API is a big improvement over previous Microsoft REST and AJAX toolkits. The key features to its usefulness are its ease of use with simple controller based logic, familiar MVC-style routing, low configuration impact, extensibility at all levels and tight attention to exposing and making HTTP semantics easily discoverable and easy to use. Although none of the concepts used in Web API are new or radical, Web API combines the best of previous platforms into a single framework that’s highly functional, easy to work with, and extensible to boot. I think that Microsoft has hit a home run with Web API. Related Resources Where does ASP.NET Web API fit? Sample Source Code on GitHub Passing multiple POST parameters to Web API Controller Methods Mapping UrlEncoded POST Values in ASP.NET Web API Creating a JSONP Formatter for ASP.NET Web API Removing the XML Formatter from ASP.NET Web API Applications© Rick Strahl, West Wind Technologies, 2005-2012Posted in Web Api   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• CodePlex Daily Summary for Saturday, August 09, 2014

  CodePlex Daily Summary for Saturday, August 09, 2014Popular ReleasesSEToolbox: SEToolbox 01.042.019 Release 1: Added RadioAntenna broadcast name to ship name detail. Added two additional columns for Asteroid material generation for Asteroid Fields. Added Mass and Block number columns to main display. Added Ellipsis to some columns on main display to reduce name confusion. Added correct SE version number in file when saving. Re-added in reattaching Motor when drag/dropping or importing ships (KeenSH have added RotorEntityId back in after removing it months ago). Added option to export and r...QuickDAL: Initial Public Build: We recommend simply forking the source into your project. But you can use this DLL and PDB (debug symbols) if you'd rather not add clutter to your solution.N-Tier Entity Framework: N-Tier Entity Framework - 1.5 Beta 2: This is a pre-release version. Contents: N-Tier Entity Framework (VS2010).1.5.0-beta002.vsix N-Tier Entity Framework (VS2012).1.5.0-beta002.vsix N-Tier Entity Framework (VS2013).1.5.0-beta002.vsixThe Freemwork - An open game framework in C# .NET: v0.2 - Vortigaunt: Added space partitionning support Added depth support on CompositeSpriteHolder Added multiple components Added camera strategies Added extensions and math methods Added another constructor to Identity2D Updated Tools.TuplesFromT64 to support multiple layers of tiles Updated Identity2D.GlobalTransform property : now returns the screen position, regardless of Identity2D.DependsOnCamera Fixed Rectangle.Transform method Fixed sprite depth support Fixed wrong mathematic functions Multiple bugfixesLanMngmtXL: LanMngmtXL-1.0.61: This release includes binary files for 64 bit OS, source code and manual. Changes- host arp tables loaded - if more than 1 million rows then data saved to several excel tabs Quick How-To (using binary file)Follow these steps to use the software. Check included documentation for more details: Unpack ZIP file Download aditional tools for retrieving configurations like Plink (save to C:\Putty\plink.exe) or WVT (read documentation) Create a device list to get configurations (ex. devices.txt...Remote Linq: Demo - RemoteQueryableToEntityFramework: Demo application to show dynamic queries (joins, aggregations, groupings, projections, etc.) over WCF using EF on server sideTransMock: TransMock 0.9.1 (Beta): Minor fixes of the assembly name with the BizUnit steps Updated the name of the isntaller to indicate that it is for BizTalk server 2010. Tested and working with BizTalk 2013 as well, though assemblies are compiled for .NET 4.0.SharePoint 2013 Lync Presence using jQuery: jQuery Lync Presence: I have fixed the same user multiple times on page issue in this release (Issue # 1506)Dynamics AX IEIDE Project Explorer: IEIDE.1.1.40803.1: Installing the project: 1. Install the ax model file; do this by running the following commands on the machine having the AX Management Tools: 1.a. cmd (depending if you have UAC enabled, you may want to Run as administrator); 1.b. net stop aos60$01 (wait until you have your AOS stopped); 1.c. cd "c:\Program Files\Microsoft Dynamics AX\60\ManagementUtili ties\" 1.d. axutil import /file:c:\IEIDE.1.1.40806.1.axmodel /verbose 1.e. net start aos60$01 1.f. start the client and select Skip 2. Per...Facebook Graph Toolkit: Facebook Graph Toolkit 5.1: Updated to 100 Graph Api endpoint mappings with 258 object propertiesJSLint.NET: JSLint.NET 1.6.4: Bugs: #38: MSBuild task support for linked settings file. #40: Explicitly typed imports / exports required in some Visual Studio environments.Instant Beautiful Browsing: IBB 14.3 Alpha: An alpha release of IBB. After 3 years of the last release this version is made from scratch, with tons of new features like: Make your own IBB aps. HTML 5. Better UI. Extreme Windows 8 resemblance. Photos. Store. Movement TONS of times smother compared to previous versions. Remember that this is AN ALPHA release, I hope I will have "IBB 14" finished by December. The documentation on how to create a new application for IBB will come next monthjQuery List DragSort: jQuery List DragSort 0.5.2: Fixed scrollContainer removing deprecated use of $.browser so should now work with latest version of jQuery. Added the ability to return false in dragEnd to revert sort order Project changes Added nuget package for dragsort https://www.nuget.org/packages/dragsort Converted repository from SVN to MercurialLexisnexis directory of corporate affiliates Text Analyzer: Lexisnexis Text Analyzer: This version has functions below.Standards to analyze, columns, keywords editing Import of document Export to CSV and Microsoft Excel fileWix# (WixSharp) - managed interface for WiX: Release 1.0.0.0: Release 1.0.0.0 Custom UI Custom MSI Dialog Custom CLR Dialog External UIRecaptcha for .NET: Recaptcha for .NET v1.6.0: What's New?Bug fixes Optimized codeMath.NET Numerics: Math.NET Numerics v3.2.0: Linear Algebra: Vector.Map2 (map2 in F#), storage-optimized Linear Algebra: fix RemoveColumn/Row early index bound check (was not strict enough) Statistics: Entropy ~Jeff Mastry Interpolation: use Array.BinarySearch instead of local implementation ~Candy Chiu Resources: fix a corrupted exception message string Portable Build: support .Net 4.0 as well by using profile 328 instead of 344. .Net 3.5: F# extensions now support .Net 3.5 as well .Net 3.5: NuGet package now contains pro...Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.11: Virto Commerce Community Edition version 1.11. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes many bug fixes and minor improvements. More details about this release can be found on our blog at http://blog.virtocommerce.com.Json.NET: Json.NET 6.0 Release 4: New feature - Added Merge to LINQ to JSON New feature - Added JValue.CreateNull and JValue.CreateUndefined New feature - Added Windows Phone 8.1 support to .NET 4.0 portable assembly New feature - Added OverrideCreator to JsonObjectContract New feature - Added support for overriding the creation of interfaces and abstract types New feature - Added support for reading UUID BSON binary values as a Guid New feature - Added MetadataPropertyHandling.Ignore New feature - Improv...VidCoder: 1.5.24 Beta: Added NL-Means denoiser. Updated HandBrake core to SVN 6254. Added extra error handling to DVD player code to avoid a crash when the player was moved.New Projects2113110030: ten: pham van long mon: oop 2113110282: Mon: OPP Ten: Tran Thanh Danh2113110294: Mon: OOP Ten: Vo Ngoc Thai Lop:CCQ1311LAarena: TESTSTSTBowling Game: Program that makes you the follow-up to a game of bowling scoresCTP API for .NET: Comprehensive Trading Platform Application Programming Interface for the .NET Framework CTP API Version: V6.3.0Dashboard Chart Exporter for Microsoft Dynamics CRM 2013: Tool to export Dashboard Charts as Image files in Microsoft Dynamics CRM 2013MergeHosts: A python script to merge hosts file together for those enjoying a clean browsing experienceMFCBDAINF: BDA DTV topology information applicationNetFlux Tunneler Client: This client is a simple Tunneler that creates a TCP connection to the server and sends a custom designed header (originally to bypass firewalls) to the server.NetFlux Tunneler Server: This server is a simple Tunneler that accepts a TCP connection from the client and forwards it to another address, intercepting the custom header. oDesk .NET Library: oDesk .NET Portable Library developed by Andrew SorochakOooPlayer: Lightweight music player that supports mp3, aac, ogg, opus, flac, alac, ape, mpc, tta, wv, wma, ac3OOP-2113110292: class :OOP Name : Nguyen Minh TanOOP-2113110299: Mon: OOP Ten: Nguyen Minh Xuan Lop: CCQ1311LA Truong: Cao dang Cong Thuong - Tp. Ho Chi MinhSFML Tower Defence: SFML Tower defence game that was meant to demonstrate the principals taught in the NWU Potchefstroom EERI 314 course. The game is created using SFML and C++.The Happy Birthday Dad Project: A happy birthday message for my dad???????: ???????QQ:2281595668，?????，????，????　　????????????????，?????????????????????，?????????????????????????!???????????????????????????????????????????????、??????????????: ?????QQ:2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ?????QQ:2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ???????????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，?????????????????: ?????????????: ????????????: ????????????: ???????????: ???????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ??????QQ：2281595668，?????，????，????。????????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，???????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,???????: ???????QQ：2281595668，?????，????，????。????????????????，?????????????????????，?????????????????????????!???????????????????????????????????????????????、?????????、??????: ??????QQ:2281595668，?????，????，????　　???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????、????????: ??????????: ??????????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ?????????????: ????????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ???????QQ：2281595668，?????，????，????。????????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，???????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，???????: ????????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ:2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”?????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ:2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ:2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ??????QQ:2281595668，?????，????，????　　????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，???????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ??????QQ：2281595668，?????，????，????。???????????????，??????????????????????????，????????????!??????????????????????????????????????????、???????、????、??????、??????????: ?????QQ:2281595668，?????，????，????　　??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;?????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ??????QQ：2281595668，?????，????，????。????????????????????，??????????????，????，?????????????????????，??????。????????，??????????????????????。????????，????????????，?????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ?????QQ:2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，???????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ:2281595668，?????，????，????　　??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;?????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ????????????: ???????????: 5454??????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ???????????: ????? QQ:2281595668，?????，????，????。????? ??????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ:2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，???????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”?????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ??????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ????? QQ:2281595668，?????，????，????。????? ?????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，???????????????: ???????????: ?????QQ:2281595668，?????，????，????　　???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，?????????????????: jhfiwegb?????: ???????????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，??????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”?????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，????????????????: ??????QQ:2281595668，?????，????，????　　???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，??????????????????????????????: ???????????: ???????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ???????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????????: ???????????: ?????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,????????????????????: ?????????????: ????????????: ??????QQ：2281595668，?????，????，????。??????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???? ?????，?????????????: ???????????: ???????????: ????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，????????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，?????????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，???????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，???????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ????????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，?????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ???????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ????????????: ????????????: ????????????: ???????????: ??????????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ??????????: ??????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，???????????: ??????QQ:2281595668，?????，????，????　　???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????、????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ??????????: ?????QQ:2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ??????????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，???????????: ??????QQ:2281595668，?????，????，????　　???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ????????????: ???????????: ?????????????: ??????????????: ??????QQ：2281595668，?????，????，????。??????????????????，????????。????????????????、???????。??????????????。?????????????????,??????,??????,??????,??????????????，???????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ:2281595668，?????，????，????　　??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，???????????????????????????????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，??????????: ????? QQ:2281595668，?????，????，????。????? ????????????，????????。????????????????、???????。??????????????。????? ???????????,??????,??????,??????,??????????????，????????: ??????QQ:2281595668，?????，????，????　　???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????、????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、???????????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????: ????????????????: ?????????????????: ?????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。??????????????????: ?????QQ：2281595668，?????，????，????。　　??????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，???????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????????: ??????QQ：2281595668，?????，????，????。???????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，???????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????????: ???????????: ???????????: ??????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ????? QQ：2281595668，?????，????，????。?????????? ???????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ:2281595668，?????，????，????　　??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;?????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ:2281595668，?????，????，????　　??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;?????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，?????????: ??????QQ：2281595668，?????，????，????。???????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、???????????????: ???????????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ???????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ??????QQ:2281595668，?????，????，????　　???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ:2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ???????????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，???????: ????????????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，???????: ?????????????: ???????????: ??????????: ??????????: ????????????: ??????????????: ????????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ????????????: ????????????: ???????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，?????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，?????????: ????????????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ:2281595668，?????，????，????　　??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ????????????: ?????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ??????QQ：2281595668，?????，????，????。???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、???????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ???????????: ?????QQ：2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ??????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ????????????: ????????????: ????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: xtbjza??????: ??????QQ：2281595668，?????，????，????。???????????????，??????????????????????????，????????????!??????????????????????????????????????????、???????、????、??????、????????????: ???????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ?????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,????????: ?????????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ??????QQ：2281595668，?????，????，????。???????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ????? QQ:2281595668，?????，????，????。????? ??????????????，??????????????，????，?????????????????????，??????。????? ??，??????????????????????。????????，????????????，??????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ????????????: ??????QQ：2281595668，?????，????，????。??????????????????，????????。????????????????、???????。??????????????。?????????????????,??????,??????,??????,??????????????，?????????: ????????????: ?????QQ:2281595668??????: ???????????: ????? QQ：2281595668，?????，????，????。????? ????????????，????????。????????????????、???????。??????????????。????? ???????????,??????,??????,??????,??????????????，????????: ????????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、???????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，?????????????: ??????????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????: ??????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”????????: ??????QQ:2281595668，?????，????，????　　????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，???????????: ?????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ?????，?????: ???????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ??????????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????: ????????????: ??????????????: ????????QQ:2281595668，?????，????，????　　??????????????????????，??1998?7??????，??????????，?????????，?????????????，?????????????????????????. ????????????????????，??????: ??????QQ：2281595668，?????，????，????。???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ??????????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，??????: ????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，????????????: ??????QQ：2281595668，?????，????，????。???????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ：2281595668，?????，????，????。?????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”???? ?????，???????????????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ?????????????: ?????????????: ???????????: ????? QQ：2281595668，?????，????，????。????? ???????????????????，????????????，????? ?98???????????，????，??????????，?????????. 　　?????????,????????????????，??????????????: ???????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，?????????: ????????????: ???????????: ??????????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,??????: ???????????: 　?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，???????????????????????????????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，????????????????????????????????: ??????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，????????????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”???????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”??????????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，??????: ?????????????: ????????????????: ????????????????: ?????????????: ????????????: ???????QQ:2281595668，?????，????，????　　???????????????????，????????????，????????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ??????QQ:2281595668，?????，????，????　　???????????????????，????????????，???????98???????????，????，??????????，?????????. 　　?????????,????????????????，???????????，???????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????????: ?????????????: ???????QQ:2281595668，?????，????，????　　???????????????????，????????????，????????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ?????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ?????QQ:2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，??????: ?????QQ：2281595668，?????，????，????。?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????。???????????????????: ????????????: ??????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，????????????，????，??“??????”????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,??????????????????: ????????????： 　　?????：??????、??、??、????、????(??、??、????)???、???????、?????、?????????????????(???、??、???、??、???); 　　?????：???、?????、???、?????(??、??、??、???)、?????(??????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、??????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ:2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ：2281595668，?????，????，????。?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，????????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，?????????????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ??????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;??????: ???????????: ???????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。???????，??????????????????????。????????，????????????，????????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ???????????: ????????????: ????????????: ?????????????: ???????QQ:2281595668，?????，????，????　　????????????????????????????,????????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;?????????: ?????QQ：2281595668，?????，????，????。????????????????????????，????????????，??????98???????????，????，??????????，?????????. 　　?????????,????????????????，????????????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、???????????????: ?????????????: ?????????????: ?????????????: ???????QQ：2281595668，?????，????，????。　　????????98???????????，???????????????????，????????????，????，??????????，?????????，?????????,????????????????，???????????，???????: ???????????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，????????????????: ?????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ?????，?????: ???????????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，???????????，????，??“??????”?????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ:2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。?????????????????，????????。????????????????、???????。??????????????。????????????????,??????,??????,??????,??????????????，????,?????: ?????QQ:2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ：2281595668，?????，????，????。???????????????????，??????????????，????，?????????????????????，??????。??，??????????????????????。????????，????????????，??????，???????: ??????QQ:2281595668，?????，????，????　　???????????????，?????????????????????，????????????????????????!??????????????????????????????????????????????、?????????、?????????: ??????QQ:2281595668，?????，????，????　　????????????????????，????????。????????????????、???????。??????????????。???????????????????,??????,??????,??????,?????????????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，???????: ???????QQ：2281595668，?????，????，????。???????????，??????????????????。?????? ?????，????????????????，????????????。????，?????????????，????，??“??????”???? ?????，?????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????????，????????????!?????????????????????????????????????????、???????、????、??????、????????????????: ???????QQ:2281595668，?????，????，????　　?????2004?，??????????????，??????????????????。?????? ?????，????????????????，????????????。????，?????????????，????，??“??????”???????: ???????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ????????????: ?????????????: ??????????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、????????: ?????????????: ????????????: ????????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ：2281595668，?????，????，????。??????????????，?????????????????????，???????????????????????!?????????????????????????????????????????????、?????????、??????、??????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ????????????: ???????QQ：2281595668，?????，????，????。???????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，??????????????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ???????????: ??????QQ：2281595668，?????，????，????。??????????????????，????????。????????????????、???????。??????????????。?????????????????,??????,??????,??????,??????????????，???????: ????? QQ：2281595668，?????，????，????。????? ????????????，????????。????????????????、???????。??????????????。????? ???????????,??????,??????,??????,??????????????，???????: ?????QQ:2281595668，?????，????，????。?????????????????!????????????????????????????????????????????、?????????、??????、????????、????????????。??????????，???????????，?????: ?????QQ：2281595668，?????，????，????。??????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????????: ???????????: ?????QQ:2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ???????????: ??????QQ：2281595668，?????，????，????。????????????????????，??1998?7??????，??????????，?????????，?????????????，???????????????????????. ????????????????????，????????????: ?????QQ:2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，?????: ?????QQ:2281595668，?????，????，????。　　?????????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，?????????????，??????: ?????QQ：2281595668，?????，????，????。???????????????????，??1998?7??????，??????????，?????????，?????????????，??????????????????????. ????????????????????，???????????????: ?????QQ：2281595668，?????，????，????。??????????????，??????、????、?????????????????????????，???????????? ??。???????????，??????????，???????????，????2000?，??????????，??????: ????????????: ???????????: ???????????: ???????????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ????????????: ??????QQ:2281595668，?????，????，????　　???????????????????????????,???????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;???????: ?????QQ：2281595668，?????，????，????。??????????????????????????,??????????,???????????????????????,???????:????,????;?????????????;??;??;????;????????;????;????;???????: ??????QQ:2281595668，?????，????，????　　????? ????????、??、??、??????????????????，???????，???????，?????????????，??????????????，?????、??????????、??、???，???????? ???????????: ??????QQ:2281595668，?????，????，????　　???????????1998?????????。????????????，???????????????，?????????????，???????????，?2003?????????????，?????????????????????????????: ???????????: ?????????????: ???????

  Read the article

• SPARC T5-4 LDoms for RAC and WebLogic Clusters

  - by Jeff Taylor-Oracle

  I wanted to use two Oracle SPARC T5-4 servers to simultaneously host both Oracle RAC and a WebLogic Server Cluster. I chose to use Oracle VM Server for SPARC to create a cluster like this: There are plenty of trade offs and decisions that need to be made, for example: Rather than configuring the system by hand, you might want to use an Oracle SuperCluster T5-8 My configuration is similar to jsavit's: Availability Best Practices - Example configuring a T5-8 but I chose to ignore some of the advice. Maybe I should have included an  alternate service domain, but I decided that I already had enough redundancy Both Oracle SPARC T5-4 servers were to be configured like this: Cntl 0.25  4  64GB                     App LDom                    2.75 CPU's                                        44 cores                                          704 GB              DB LDom      One CPU         16 cores         256 GB   The systems started with everything in the primary domain: # ldm list NAME             STATE      FLAGS   CONS    VCPU  MEMORY   UTIL  NORM  UPTIME primary          active     -n-c--  UART    512   1023G    0.0%  0.0%  11m # ldm list-spconfig factory-default [current] primary # ldm list -o core,memory,physio NAME              primary           CORE     CID    CPUSET     0      (0, 1, 2, 3, 4, 5, 6, 7)     1      (8, 9, 10, 11, 12, 13, 14, 15)     2      (16, 17, 18, 19, 20, 21, 22, 23) -- SNIP     62     (496, 497, 498, 499, 500, 501, 502, 503)     63     (504, 505, 506, 507, 508, 509, 510, 511) MEMORY     RA               PA               SIZE                 0x30000000       0x30000000       255G     0x80000000000    0x80000000000    256G     0x100000000000   0x100000000000   256G     0x180000000000   0x180000000000   256G # Give this memory block to the DB LDom IO     DEVICE                           PSEUDONYM        OPTIONS     pci@300                          pci_0                pci@340                          pci_1                pci@380                          pci_2                pci@3c0                          pci_3                pci@400                          pci_4                pci@440                          pci_5                pci@480                          pci_6                pci@4c0                          pci_7                pci@300/pci@1/pci@0/pci@6        /SYS/RCSA/PCIE1     pci@300/pci@1/pci@0/pci@c        /SYS/RCSA/PCIE2     pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0     pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0        pci@340/pci@1/pci@0/pci@6        /SYS/RCSA/PCIE3     pci@340/pci@1/pci@0/pci@c        /SYS/RCSA/PCIE4     pci@380/pci@1/pci@0/pci@a        /SYS/RCSA/PCIE9     pci@380/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE10     pci@3c0/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE11     pci@3c0/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE12     pci@400/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE5     pci@400/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE6     pci@440/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE7     pci@440/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE8     pci@480/pci@1/pci@0/pci@a        /SYS/RCSA/PCIE13     pci@480/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE14     pci@4c0/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE15     pci@4c0/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE16     pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1     pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2    Added an additional service processor configuration: # ldm add-spconfig split # ldm list-spconfig factory-default primary split [current] And removed many of the resources from the primary domain: # ldm start-reconf primary # ldm set-core 4 primary # ldm set-memory 32G primary # ldm rm-io pci@340 primary # ldm rm-io pci@380 primary # ldm rm-io pci@3c0 primary # ldm rm-io pci@400 primary # ldm rm-io pci@440 primary # ldm rm-io pci@480 primary # ldm rm-io pci@4c0 primary # init 6 Needed to add resources to the guest domains: # ldm add-domain db # ldm set-core cid=`seq -s"," 48 63` db # ldm add-memory mblock=0x180000000000:256G db # ldm add-io pci@480 db # ldm add-io pci@4c0 db # ldm add-domain app # ldm set-core 44 app # ldm set-memory 704G  app # ldm add-io pci@340 app # ldm add-io pci@380 app # ldm add-io pci@3c0 app # ldm add-io pci@400 app # ldm add-io pci@440 app Needed to set up services: # ldm add-vds primary-vds0 primary # ldm add-vcc port-range=5000-5100 primary-vcc0 primary Needed to add a virtual network port for the WebLogic application domain: # ipadm NAME              CLASS/TYPE STATE        UNDER      ADDR lo0               loopback   ok           --         --    lo0/v4         static     ok           --         ...    lo0/v6         static     ok           --         ... net0              ip         ok           --         ...    net0/v4        static     ok           --         xxx.xxx.xxx.xxx/24    net0/v6        addrconf   ok           --         ....    net0/v6        addrconf   ok           --         ... net8              ip         ok           --         --    net8/v4        static     ok           --         ... # dladm show-phys LINK              MEDIA                STATE      SPEED  DUPLEX    DEVICE net1              Ethernet             unknown    0      unknown   ixgbe1 net0              Ethernet             up         1000   full      ixgbe0 net8              Ethernet             up         10     full      usbecm2 # ldm add-vsw net-dev=net0 primary-vsw0 primary # ldm add-vnet vnet1 primary-vsw0 app Needed to add a virtual disk to the WebLogic application domain: # format Searching for disks...done AVAILABLE DISK SELECTIONS:        0. c0t5000CCA02505F874d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB>           /scsi_vhci/disk@g5000cca02505f874           /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD0/disk        1. c0t5000CCA02506C468d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB>           /scsi_vhci/disk@g5000cca02506c468           /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD1/disk        2. c0t5000CCA025067E5Cd0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB>           /scsi_vhci/disk@g5000cca025067e5c           /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD2/disk        3. c0t5000CCA02506C258d0 <HITACHI-H106060SDSUN600G-A2B0-558.91GB>           /scsi_vhci/disk@g5000cca02506c258           /dev/chassis/SPARC_T5-4.AK00084038/SYS/SASBP0/HDD3/disk Specify disk (enter its number): ^C # ldm add-vdsdev /dev/dsk/c0t5000CCA02506C468d0s2 HDD1@primary-vds0 # ldm add-vdisk HDD1 HDD1@primary-vds0 app Add some additional spice to the pot: # ldm set-variable auto-boot\\?=false db # ldm set-variable auto-boot\\?=false app # ldm set-var boot-device=HDD1 app Bind the logical domains: # ldm bind db # ldm bind app At the end of the process, the system is set up like this: # ldm list -o core,memory,physio NAME             primary          CORE     CID    CPUSET     0      (0, 1, 2, 3, 4, 5, 6, 7)     1      (8, 9, 10, 11, 12, 13, 14, 15)     2      (16, 17, 18, 19, 20, 21, 22, 23)     3      (24, 25, 26, 27, 28, 29, 30, 31) MEMORY     RA               PA               SIZE                0x30000000       0x30000000       32G IO     DEVICE                           PSEUDONYM        OPTIONS     pci@300                          pci_0               pci@300/pci@1/pci@0/pci@6        /SYS/RCSA/PCIE1     pci@300/pci@1/pci@0/pci@c        /SYS/RCSA/PCIE2     pci@300/pci@1/pci@0/pci@4/pci@0/pci@c /SYS/MB/SASHBA0     pci@300/pci@1/pci@0/pci@4/pci@0/pci@8 /SYS/RIO/NET0   ------------------------------------------------------------------------------ NAME             app              CORE     CID    CPUSET     4      (32, 33, 34, 35, 36, 37, 38, 39)     5      (40, 41, 42, 43, 44, 45, 46, 47)     6      (48, 49, 50, 51, 52, 53, 54, 55)     7      (56, 57, 58, 59, 60, 61, 62, 63)     8      (64, 65, 66, 67, 68, 69, 70, 71)     9      (72, 73, 74, 75, 76, 77, 78, 79)     10     (80, 81, 82, 83, 84, 85, 86, 87)     11     (88, 89, 90, 91, 92, 93, 94, 95)     12     (96, 97, 98, 99, 100, 101, 102, 103)     13     (104, 105, 106, 107, 108, 109, 110, 111)     14     (112, 113, 114, 115, 116, 117, 118, 119)     15     (120, 121, 122, 123, 124, 125, 126, 127)     16     (128, 129, 130, 131, 132, 133, 134, 135)     17     (136, 137, 138, 139, 140, 141, 142, 143)     18     (144, 145, 146, 147, 148, 149, 150, 151)     19     (152, 153, 154, 155, 156, 157, 158, 159)     20     (160, 161, 162, 163, 164, 165, 166, 167)     21     (168, 169, 170, 171, 172, 173, 174, 175)     22     (176, 177, 178, 179, 180, 181, 182, 183)     23     (184, 185, 186, 187, 188, 189, 190, 191)     24     (192, 193, 194, 195, 196, 197, 198, 199)     25     (200, 201, 202, 203, 204, 205, 206, 207)     26     (208, 209, 210, 211, 212, 213, 214, 215)     27     (216, 217, 218, 219, 220, 221, 222, 223)     28     (224, 225, 226, 227, 228, 229, 230, 231)     29     (232, 233, 234, 235, 236, 237, 238, 239)     30     (240, 241, 242, 243, 244, 245, 246, 247)     31     (248, 249, 250, 251, 252, 253, 254, 255)     32     (256, 257, 258, 259, 260, 261, 262, 263)     33     (264, 265, 266, 267, 268, 269, 270, 271)     34     (272, 273, 274, 275, 276, 277, 278, 279)     35     (280, 281, 282, 283, 284, 285, 286, 287)     36     (288, 289, 290, 291, 292, 293, 294, 295)     37     (296, 297, 298, 299, 300, 301, 302, 303)     38     (304, 305, 306, 307, 308, 309, 310, 311)     39     (312, 313, 314, 315, 316, 317, 318, 319)     40     (320, 321, 322, 323, 324, 325, 326, 327)     41     (328, 329, 330, 331, 332, 333, 334, 335)     42     (336, 337, 338, 339, 340, 341, 342, 343)     43     (344, 345, 346, 347, 348, 349, 350, 351)     44     (352, 353, 354, 355, 356, 357, 358, 359)     45     (360, 361, 362, 363, 364, 365, 366, 367)     46     (368, 369, 370, 371, 372, 373, 374, 375)     47     (376, 377, 378, 379, 380, 381, 382, 383) MEMORY     RA               PA               SIZE                0x30000000       0x830000000      192G     0x4000000000     0x80000000000    256G     0x8080000000     0x100000000000   256G IO     DEVICE                           PSEUDONYM        OPTIONS     pci@340                          pci_1               pci@380                          pci_2               pci@3c0                          pci_3               pci@400                          pci_4               pci@440                          pci_5               pci@340/pci@1/pci@0/pci@6        /SYS/RCSA/PCIE3     pci@340/pci@1/pci@0/pci@c        /SYS/RCSA/PCIE4     pci@380/pci@1/pci@0/pci@a        /SYS/RCSA/PCIE9     pci@380/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE10     pci@3c0/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE11     pci@3c0/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE12     pci@400/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE5     pci@400/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE6     pci@440/pci@1/pci@0/pci@e        /SYS/RCSA/PCIE7     pci@440/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE8 ------------------------------------------------------------------------------ NAME             db               CORE     CID    CPUSET     48     (384, 385, 386, 387, 388, 389, 390, 391)     49     (392, 393, 394, 395, 396, 397, 398, 399)     50     (400, 401, 402, 403, 404, 405, 406, 407)     51     (408, 409, 410, 411, 412, 413, 414, 415)     52     (416, 417, 418, 419, 420, 421, 422, 423)     53     (424, 425, 426, 427, 428, 429, 430, 431)     54     (432, 433, 434, 435, 436, 437, 438, 439)     55     (440, 441, 442, 443, 444, 445, 446, 447)     56     (448, 449, 450, 451, 452, 453, 454, 455)     57     (456, 457, 458, 459, 460, 461, 462, 463)     58     (464, 465, 466, 467, 468, 469, 470, 471)     59     (472, 473, 474, 475, 476, 477, 478, 479)     60     (480, 481, 482, 483, 484, 485, 486, 487)     61     (488, 489, 490, 491, 492, 493, 494, 495)     62     (496, 497, 498, 499, 500, 501, 502, 503)     63     (504, 505, 506, 507, 508, 509, 510, 511) MEMORY     RA               PA               SIZE                0x80000000       0x180000000000   256G IO     DEVICE                           PSEUDONYM        OPTIONS     pci@480                          pci_6               pci@4c0                          pci_7               pci@480/pci@1/pci@0/pci@a        /SYS/RCSA/PCIE13     pci@480/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE14     pci@4c0/pci@1/pci@0/pci@8        /SYS/RCSA/PCIE15     pci@4c0/pci@1/pci@0/pci@4        /SYS/RCSA/PCIE16     pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c /SYS/MB/SASHBA1     pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4 /SYS/RIO/NET2   Start the domains: # ldm start app LDom app started # ldm start db LDom db started Make sure to start the vntsd service that was created, above. # svcs -a | grep ldo disabled        8:38:38 svc:/ldoms/vntsd:default online          8:38:58 svc:/ldoms/agents:default online          8:39:25 svc:/ldoms/ldmd:default # svcadm enable vntsd Now use the MAC address to configure the Solaris 11 Automated Installation. Database Logical Domain # telnet localhost 5000 {0} ok devalias screen                   /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@7/display@0 disk7                    /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p3 disk6                    /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p2 disk5                    /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p1 disk4                    /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0/disk@p0 scsi1                    /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@c/scsi@0 net3                     /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0,1 net2                     /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0 virtual-console          /virtual-devices/console@1 name                     aliases {0} ok boot net2 Boot device: /pci@4c0/pci@1/pci@0/pci@c/pci@0/pci@4/network@0  File and args: 1000 Mbps full duplex Link up Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx WLS Logical Domain # telnet localhost 5001 {0} ok devalias hdd1                     /virtual-devices@100/channel-devices@200/disk@0 vnet1                    /virtual-devices@100/channel-devices@200/network@0 net                      /virtual-devices@100/channel-devices@200/network@0 disk                     /virtual-devices@100/channel-devices@200/disk@0 virtual-console          /virtual-devices/console@1 name                     aliases {0} ok boot net Boot device: /virtual-devices@100/channel-devices@200/network@0  File and args: Requesting Internet Address for xx:xx:xx:xx:xx:xx Requesting Internet Address for xx:xx:xx:xx:xx:xx Repeat the process for the second SPARC T5-4, install Solaris, RAC and WebLogic Cluster, and you are ready to go. Maybe buying a SuperCluster would have been easier.

  Read the article

• Unable to install Xdebug

  - by burnt1ce

  I've registered xdebug in php.ini (as per http://xdebug.org/docs/install) but it's not showing up when i run "php -m" or when i get a test page to run "phpinfo()". I've just installed the latest version of XAMPP. Can anyone provide any suggestions in getting xdebug to show up? This is what i get when i run phpinfo(). **PHP Version 5.3.1** System Windows NT ANDREW_LAPTOP 5.1 build 2600 (Windows XP Professional Service Pack 3) i586 Build Date Nov 20 2009 17:20:57 Compiler MSVC6 (Visual C++ 6.0) Architecture x86 Configure Command cscript /nologo configure.js "--enable-snapshot-build" Server API Apache 2.0 Handler Virtual Directory Support enabled Configuration File (php.ini) Path no value Loaded Configuration File C:\xampp\php\php.ini Scan this dir for additional .ini files (none) Additional .ini files parsed (none) PHP API 20090626 PHP Extension 20090626 Zend Extension 220090626 Zend Extension Build API220090626,TS,VC6 PHP Extension Build API20090626,TS,VC6 Debug Build no Thread Safety enabled Zend Memory Manager enabled Zend Multibyte Support disabled IPv6 Support enabled Registered PHP Streams https, ftps, php, file, glob, data, http, ftp, compress.zlib, compress.bzip2, phar, zip Registered Stream Socket Transports tcp, udp, ssl, sslv3, sslv2, tls Registered Stream Filters convert.iconv.*, string.rot13, string.toupper, string.tolower, string.strip_tags, convert.*, consumed, dechunk, zlib.*, bzip2.* This program makes use of the Zend Scripting Language Engine: Zend Engine v2.3.0, Copyright (c) 1998-2009 Zend Technologies PHP Credits Configuration apache2handler Apache Version Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Apache API Version 20051115 Server Administrator postmaster@localhost Hostname:Port localhost:80 Max Requests Per Child: 0 - Keep Alive: on - Max Per Connection: 100 Timeouts Connection: 300 - Keep-Alive: 5 Virtual Server No Server Root C:/xampp/apache Loaded Modules core mod_win32 mpm_winnt http_core mod_so mod_actions mod_alias mod_asis mod_auth_basic mod_auth_digest mod_authn_default mod_authn_file mod_authz_default mod_authz_groupfile mod_authz_host mod_authz_user mod_cgi mod_dav mod_dav_fs mod_dav_lock mod_dir mod_env mod_headers mod_include mod_info mod_isapi mod_log_config mod_mime mod_negotiation mod_rewrite mod_setenvif mod_ssl mod_status mod_autoindex_color mod_php5 mod_perl mod_apreq2 Directive Local Value Master Value engine 1 1 last_modified 0 0 xbithack 0 0 Apache Environment Variable Value MIBDIRS C:/xampp/php/extras/mibs MYSQL_HOME C:\xampp\mysql\bin OPENSSL_CONF C:/xampp/apache/bin/openssl.cnf PHP_PEAR_SYSCONF_DIR C:\xampp\php PHPRC C:\xampp\php TMP C:\xampp\tmp HTTP_HOST localhost HTTP_CONNECTION keep-alive HTTP_USER_AGENT Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 HTTP_CACHE_CONTROL max-age=0 HTTP_ACCEPT application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 HTTP_ACCEPT_ENCODING gzip,deflate,sdch HTTP_ACCEPT_LANGUAGE en-US,en;q=0.8 HTTP_ACCEPT_CHARSET ISO-8859-1,utf-8;q=0.7,*;q=0.3 PATH C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin SystemRoot C:\WINDOWS COMSPEC C:\WINDOWS\system32\cmd.exe PATHEXT .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH WINDIR C:\WINDOWS SERVER_SIGNATURE <address>Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Server at localhost Port 80</address> SERVER_SOFTWARE Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 SERVER_NAME localhost SERVER_ADDR 127.0.0.1 SERVER_PORT 80 REMOTE_ADDR 127.0.0.1 DOCUMENT_ROOT C:/xampp/htdocs SERVER_ADMIN postmaster@localhost SCRIPT_FILENAME C:/xampp/htdocs/test.php REMOTE_PORT 3275 GATEWAY_INTERFACE CGI/1.1 SERVER_PROTOCOL HTTP/1.1 REQUEST_METHOD GET QUERY_STRING no value REQUEST_URI /test.php SCRIPT_NAME /test.php HTTP Headers Information HTTP Request Headers HTTP Request GET /test.php HTTP/1.1 Host localhost Connection keep-alive User-Agent Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 Cache-Control max-age=0 Accept application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 Accept-Encoding gzip,deflate,sdch Accept-Language en-US,en;q=0.8 Accept-Charset ISO-8859-1,utf-8;q=0.7,*;q=0.3 HTTP Response Headers X-Powered-By PHP/5.3.1 Keep-Alive timeout=5, max=80 Connection Keep-Alive Transfer-Encoding chunked Content-Type text/html bcmath BCMath support enabled Directive Local Value Master Value bcmath.scale 0 0 bz2 BZip2 Support Enabled Stream Wrapper support compress.bz2:// Stream Filter support bzip2.decompress, bzip2.compress BZip2 Version 1.0.5, 10-Dec-2007 calendar Calendar support enabled com_dotnet COM support enabled DCOM support disabled .Net support enabled Directive Local Value Master Value com.allow_dcom 0 0 com.autoregister_casesensitive 1 1 com.autoregister_typelib 0 0 com.autoregister_verbose 0 0 com.code_page no value no value com.typelib_file no value no value Core PHP Version 5.3.1 Directive Local Value Master Value allow_call_time_pass_reference On On allow_url_fopen On On allow_url_include Off Off always_populate_raw_post_data Off Off arg_separator.input & & arg_separator.output &amp; &amp; asp_tags Off Off auto_append_file no value no value auto_globals_jit On On auto_prepend_file no value no value browscap C:\xampp\php\extras\browscap.ini C:\xampp\php\extras\browscap.ini default_charset no value no value default_mimetype text/html text/html define_syslog_variables Off Off disable_classes no value no value disable_functions no value no value display_errors On On display_startup_errors On On doc_root no value no value docref_ext no value no value docref_root no value no value enable_dl On On error_append_string no value no value error_log no value no value error_prepend_string no value no value error_reporting 22519 22519 exit_on_timeout Off Off expose_php On On extension_dir C:\xampp\php\ext C:\xampp\php\ext file_uploads On On highlight.bg #FFFFFF #FFFFFF highlight.comment #FF8000 #FF8000 highlight.default #0000BB #0000BB highlight.html #000000 #000000 highlight.keyword #007700 #007700 highlight.string #DD0000 #DD0000 html_errors On On ignore_repeated_errors Off Off ignore_repeated_source Off Off ignore_user_abort Off Off implicit_flush Off Off include_path .;C:\xampp\php\PEAR .;C:\xampp\php\PEAR log_errors Off Off log_errors_max_len 1024 1024 magic_quotes_gpc Off Off magic_quotes_runtime Off Off magic_quotes_sybase Off Off mail.add_x_header Off Off mail.force_extra_parameters no value no value mail.log no value no value max_execution_time 60 60 max_file_uploads 20 20 max_input_nesting_level 64 64 max_input_time 60 60 memory_limit 128M 128M open_basedir no value no value output_buffering no value no value output_handler no value no value post_max_size 128M 128M precision 14 14 realpath_cache_size 16K 16K realpath_cache_ttl 120 120 register_argc_argv On On register_globals Off Off register_long_arrays Off Off report_memleaks On On report_zend_debug On On request_order no value no value safe_mode Off Off safe_mode_exec_dir no value no value safe_mode_gid Off Off safe_mode_include_dir no value no value sendmail_from no value no value sendmail_path no value no value serialize_precision 100 100 short_open_tag Off Off SMTP localhost localhost smtp_port 25 25 sql.safe_mode Off Off track_errors Off Off unserialize_callback_func no value no value upload_max_filesize 128M 128M upload_tmp_dir C:\xampp\tmp C:\xampp\tmp user_dir no value no value user_ini.cache_ttl 300 300 user_ini.filename .user.ini .user.ini variables_order GPCS GPCS xmlrpc_error_number 0 0 xmlrpc_errors Off Off y2k_compliance On On zend.enable_gc On On ctype ctype functions enabled date date/time support enabled "Olson" Timezone Database Version 2009.18 Timezone Database internal Default timezone America/New_York Directive Local Value Master Value date.default_latitude 31.7667 31.7667 date.default_longitude 35.2333 35.2333 date.sunrise_zenith 90.583333 90.583333 date.sunset_zenith 90.583333 90.583333 date.timezone America/New_York America/New_York dom DOM/XML enabled DOM/XML API Version 20031129 libxml Version 2.7.6 HTML Support enabled XPath Support enabled XPointer Support enabled Schema Support enabled RelaxNG Support enabled ereg Regex Library System library enabled exif EXIF Support enabled EXIF Version 1.4 $Id: exif.c 287372 2009-08-16 14:32:32Z iliaa $ Supported EXIF Version 0220 Supported filetypes JPEG,TIFF Directive Local Value Master Value exif.decode_jis_intel JIS JIS exif.decode_jis_motorola JIS JIS exif.decode_unicode_intel UCS-2LE UCS-2LE exif.decode_unicode_motorola UCS-2BE UCS-2BE exif.encode_jis no value no value exif.encode_unicode ISO-8859-15 ISO-8859-15 fileinfo fileinfo support enabled version 1.0.5-dev filter Input Validation and Filtering enabled Revision $Revision: 289434 $ Directive Local Value Master Value filter.default unsafe_raw unsafe_raw filter.default_flags no value no value ftp FTP support enabled gd GD Support enabled GD Version bundled (2.0.34 compatible) FreeType Support enabled FreeType Linkage with freetype FreeType Version 2.3.11 T1Lib Support enabled GIF Read Support enabled GIF Create Support enabled JPEG Support enabled libJPEG Version 7 PNG Support enabled libPNG Version 1.2.40 WBMP Support enabled XBM Support enabled JIS-mapped Japanese Font Support enabled Directive Local Value Master Value gd.jpeg_ignore_warning 0 0 gettext GetText Support enabled hash hash support enabled Hashing Engines md2 md4 md5 sha1 sha224 sha256 sha384 sha512 ripemd128 ripemd160 ripemd256 ripemd320 whirlpool tiger128,3 tiger160,3 tiger192,3 tiger128,4 tiger160,4 tiger192,4 snefru snefru256 gost adler32 crc32 crc32b salsa10 salsa20 haval128,3 haval160,3 haval192,3 haval224,3 haval256,3 haval128,4 haval160,4 haval192,4 haval224,4 haval256,4 haval128,5 haval160,5 haval192,5 haval224,5 haval256,5 iconv iconv support enabled iconv implementation "libiconv" iconv library version 1.13 Directive Local Value Master Value iconv.input_encoding ISO-8859-1 ISO-8859-1 iconv.internal_encoding ISO-8859-1 ISO-8859-1 iconv.output_encoding ISO-8859-1 ISO-8859-1 imap IMAP c-Client Version 2007e SSL Support enabled json json support enabled json version 1.2.1 libxml libXML support active libXML Compiled Version 2.7.6 libXML Loaded Version 20706 libXML streams enabled mbstring Multibyte Support enabled Multibyte string engine libmbfl HTTP input encoding translation disabled mbstring extension makes use of "streamable kanji code filter and converter", which is distributed under the GNU Lesser General Public License version 2.1. Multibyte (japanese) regex support enabled Multibyte regex (oniguruma) version 4.7.1 Directive Local Value Master Value mbstring.detect_order no value no value mbstring.encoding_translation Off Off mbstring.func_overload 0 0 mbstring.http_input pass pass mbstring.http_output pass pass mbstring.http_output_conv_mimetypes ^(text/|application/xhtml\+xml) ^(text/|application/xhtml\+xml) mbstring.internal_encoding no value no value mbstring.language neutral neutral mbstring.strict_detection Off Off mbstring.substitute_character no value no value mcrypt mcrypt support enabled Version 2.5.8 Api No 20021217 Supported ciphers cast-128 gost rijndael-128 twofish arcfour cast-256 loki97 rijndael-192 saferplus wake blowfish-compat des rijndael-256 serpent xtea blowfish enigma rc2 tripledes Supported modes cbc cfb ctr ecb ncfb nofb ofb stream Directive Local Value Master Value mcrypt.algorithms_dir no value no value mcrypt.modes_dir no value no value mhash MHASH support Enabled MHASH API Version Emulated Support ming Ming SWF output library enabled Version 0.4.3 mysql MySQL Support enabled Active Persistent Links 0 Active Links 0 Client API version 5.1.41 Directive Local Value Master Value mysql.allow_local_infile On On mysql.allow_persistent On On mysql.connect_timeout 60 60 mysql.default_host no value no value mysql.default_password no value no value mysql.default_port 3306 3306 mysql.default_socket MySQL MySQL mysql.default_user no value no value mysql.max_links Unlimited Unlimited mysql.max_persistent Unlimited Unlimited mysql.trace_mode Off Off mysqli MysqlI Support enabled Client API library version 5.1.41 Active Persistent Links 0 Inactive Persistent Links 0 Active Links 0 Client API header version 5.1.41 MYSQLI_SOCKET MySQL Directive Local Value Master Value mysqli.allow_local_infile On On mysqli.allow_persistent On On mysqli.default_host no value no value mysqli.default_port 3306 3306 mysqli.default_pw no value no value mysqli.default_socket MySQL MySQL mysqli.default_user no value no value mysqli.max_links Unlimited Unlimited mysqli.max_persistent Unlimited Unlimited mysqli.reconnect Off Off mysqlnd mysqlnd enabled Version mysqlnd 5.0.5-dev - 081106 - $Revision: 289630 $ Command buffer size 4096 Read buffer size 32768 Read timeout 31536000 Collecting statistics Yes Collecting memory statistics No Client statistics bytes_sent 0 bytes_received 0 packets_sent 0 packets_received 0 protocol_overhead_in 0 protocol_overhead_out 0 bytes_received_ok_packet 0 bytes_received_eof_packet 0 bytes_received_rset_header_packet 0 bytes_received_rset_field_meta_packet 0 bytes_received_rset_row_packet 0 bytes_received_prepare_response_packet 0 bytes_received_change_user_packet 0 packets_sent_command 0 packets_received_ok 0 packets_received_eof 0 packets_received_rset_header 0 packets_received_rset_field_meta 0 packets_received_rset_row 0 packets_received_prepare_response 0 packets_received_change_user 0 result_set_queries 0 non_result_set_queries 0 no_index_used 0 bad_index_used 0 slow_queries 0 buffered_sets 0 unbuffered_sets 0 ps_buffered_sets 0 ps_unbuffered_sets 0 flushed_normal_sets 0 flushed_ps_sets 0 ps_prepared_never_executed 0 ps_prepared_once_executed 0 rows_fetched_from_server_normal 0 rows_fetched_from_server_ps 0 rows_buffered_from_client_normal 0 rows_buffered_from_client_ps 0 rows_fetched_from_client_normal_buffered 0 rows_fetched_from_client_normal_unbuffered 0 rows_fetched_from_client_ps_buffered 0 rows_fetched_from_client_ps_unbuffered 0 rows_fetched_from_client_ps_cursor 0 rows_skipped_normal 0 rows_skipped_ps 0 copy_on_write_saved 0 copy_on_write_performed 0 command_buffer_too_small 0 connect_success 0 connect_failure 0 connection_reused 0 reconnect 0 pconnect_success 0 active_connections 0 active_persistent_connections 0 explicit_close 0 implicit_close 0 disconnect_close 0 in_middle_of_command_close 0 explicit_free_result 0 implicit_free_result 0 explicit_stmt_close 0 implicit_stmt_close 0 mem_emalloc_count 0 mem_emalloc_ammount 0 mem_ecalloc_count 0 mem_ecalloc_ammount 0 mem_erealloc_count 0 mem_erealloc_ammount 0 mem_efree_count 0 mem_malloc_count 0 mem_malloc_ammount 0 mem_calloc_count 0 mem_calloc_ammount 0 mem_realloc_count 0 mem_realloc_ammount 0 mem_free_count 0 proto_text_fetched_null 0 proto_text_fetched_bit 0 proto_text_fetched_tinyint 0 proto_text_fetched_short 0 proto_text_fetched_int24 0 proto_text_fetched_int 0 proto_text_fetched_bigint 0 proto_text_fetched_decimal 0 proto_text_fetched_float 0 proto_text_fetched_double 0 proto_text_fetched_date 0 proto_text_fetched_year 0 proto_text_fetched_time 0 proto_text_fetched_datetime 0 proto_text_fetched_timestamp 0 proto_text_fetched_string 0 proto_text_fetched_blob 0 proto_text_fetched_enum 0 proto_text_fetched_set 0 proto_text_fetched_geometry 0 proto_text_fetched_other 0 proto_binary_fetched_null 0 proto_binary_fetched_bit 0 proto_binary_fetched_tinyint 0 proto_binary_fetched_short 0 proto_binary_fetched_int24 0 proto_binary_fetched_int 0 proto_binary_fetched_bigint 0 proto_binary_fetched_decimal 0 proto_binary_fetched_float 0 proto_binary_fetched_double 0 proto_binary_fetched_date 0 proto_binary_fetched_year 0 proto_binary_fetched_time 0 proto_binary_fetched_datetime 0 proto_binary_fetched_timestamp 0 proto_binary_fetched_string 0 proto_binary_fetched_blob 0 proto_binary_fetched_enum 0 proto_binary_fetched_set 0 proto_binary_fetched_geometry 0 proto_binary_fetched_other 0 init_command_executed_count 0 init_command_failed_count 0 odbc ODBC Support enabled Active Persistent Links 0 Active Links 0 ODBC library Win32 Directive Local Value Master Value odbc.allow_persistent On On odbc.check_persistent On On odbc.default_cursortype Static cursor Static cursor odbc.default_db no value no value odbc.default_pw no value no value odbc.default_user no value no value odbc.defaultbinmode return as is return as is odbc.defaultlrl return up to 4096 bytes return up to 4096 bytes odbc.max_links Unlimited Unlimited odbc.max_persistent Unlimited Unlimited openssl OpenSSL support enabled OpenSSL Library Version OpenSSL 0.9.8l 5 Nov 2009 OpenSSL Header Version OpenSSL 0.9.8l 5 Nov 2009 pcre PCRE (Perl Compatible Regular Expressions) Support enabled PCRE Library Version 8.00 2009-10-19 Directive Local Value Master Value pcre.backtrack_limit 100000 100000 pcre.recursion_limit 100000 100000 pdf PDF Support enabled PDFlib GmbH Version 7.0.4p4 PECL Version 2.1.6 Revision $Revision: 277110 $ PDO PDO support enabled PDO drivers mysql, odbc, sqlite, sqlite2 pdo_mysql PDO Driver for MySQL enabled Client API version 5.1.41 PDO_ODBC PDO Driver for ODBC (Win32) enabled ODBC Connection Pooling Enabled, strict matching pdo_sqlite PDO Driver for SQLite 3.x enabled SQLite Library 3.6.20 Phar Phar: PHP Archive support enabled Phar EXT version 2.0.1 Phar API version 1.1.1 CVS revision $Revision: 286338 $ Phar-based phar archives enabled Tar-based phar archives enabled ZIP-based phar archives enabled gzip compression enabled bzip2 compression enabled Native OpenSSL support enabled Phar based on pear/PHP_Archive, original concept by Davey Shafik. Phar fully realized by Gregory Beaver and Marcus Boerger. Portions of tar implementation Copyright (c) 2003-2009 Tim Kientzle. Directive Local Value Master Value phar.cache_list no value no value phar.readonly On On phar.require_hash On On Reflection Reflection enabled Version $Revision: 287991 $ session Session Support enabled Registered save handlers files user sqlite Registered serializer handlers php php_binary wddx Directive Local Value Master Value session.auto_start Off Off session.bug_compat_42 On On session.bug_compat_warn On On session.cache_expire 180 180 session.cache_limiter nocache nocache session.cookie_domain no value no value session.cookie_httponly Off Off session.cookie_lifetime 0 0 session.cookie_path / / session.cookie_secure Off Off session.entropy_file no value no value session.entropy_length 0 0 session.gc_divisor 100 100 session.gc_maxlifetime 1440 1440 session.gc_probability 1 1 session.hash_bits_per_character 5 5 session.hash_function 0 0 session.name PHPSESSID PHPSESSID session.referer_check no value no value session.save_handler files files session.save_path C:\xampp\tmp C:\xampp\tmp session.serialize_handler php php session.use_cookies On On session.use_only_cookies Off Off session.use_trans_sid 0 0 SimpleXML Simplexml support enabled Revision $Revision: 281953 $ Schema support enabled soap Soap Client enabled Soap Server enabled Directive Local Value Master Value soap.wsdl_cache 1 1 soap.wsdl_cache_dir /tmp /tmp soap.wsdl_cache_enabled 1 1 soap.wsdl_cache_limit 5 5 soap.wsdl_cache_ttl 86400 86400 sockets Sockets Support enabled SPL SPL support enabled Interfaces Countable, OuterIterator, RecursiveIterator, SeekableIterator, SplObserver, SplSubject Classes AppendIterator, ArrayIterator, ArrayObject, BadFunctionCallException, BadMethodCallException, CachingIterator, DirectoryIterator, DomainException, EmptyIterator, FilesystemIterator, FilterIterator, GlobIterator, InfiniteIterator, InvalidArgumentException, IteratorIterator, LengthException, LimitIterator, LogicException, MultipleIterator, NoRewindIterator, OutOfBoundsException, OutOfRangeException, OverflowException, ParentIterator, RangeException, RecursiveArrayIterator, RecursiveCachingIterator, RecursiveDirectoryIterator, RecursiveFilterIterator, RecursiveIteratorIterator, RecursiveRegexIterator, RecursiveTreeIterator, RegexIterator, RuntimeException, SplDoublyLinkedList, SplFileInfo, SplFileObject, SplFixedArray, SplHeap, SplMinHeap, SplMaxHeap, SplObjectStorage, SplPriorityQueue, SplQueue, SplStack, SplTempFileObject, UnderflowException, UnexpectedValueException SQLite SQLite support enabled PECL Module version 2.0-dev $Id: sqlite.c 289598 2009-10-12 22:37:52Z pajoye $ SQLite Library 2.8.17 SQLite Encoding iso8859 Directive Local Value Master Value sqlite.assoc_case 0 0 sqlite3 SQLite3 support enabled SQLite3 module version 0.7-dev SQLite Library 3.6.20 Directive Local Value Master Value sqlite3.extension_dir no value no value standard Dynamic Library Support enabled Internal Sendmail Support for Windows enabled Directive Local Value Master Value assert.active 1 1 assert.bail 0 0 assert.callback no value no value assert.quiet_eval 0 0 assert.warning 1 1 auto_detect_line_endings 0 0 default_socket_timeout 60 60 safe_mode_allowed_env_vars PHP_ PHP_ safe_mode_protected_env_vars LD_LIBRARY_PATH LD_LIBRARY_PATH url_rewriter.tags a=href,area=href,frame=src,input=src,form=,fieldset= a=href,area=href,frame=src,input=src,form=,fieldset= user_agent no value no value tokenizer Tokenizer Support enabled wddx WDDX Support enabled WDDX Session Serializer enabled xml XML Support active XML Namespace Support active libxml2 Version 2.7.6 xmlreader XMLReader enabled xmlrpc core library version xmlrpc-epi v. 0.54 php extension version 0.51 author Dan Libby homepage http://xmlrpc-epi.sourceforge.net open sourced by Epinions.com xmlwriter XMLWriter enabled xsl XSL enabled libxslt Version 1.1.26 libxslt compiled against libxml Version 2.7.6 EXSLT enabled libexslt Version 1.1.26 zip Zip enabled Extension Version $Id: php_zip.c 276389 2009-02-24 23:55:14Z iliaa $ Zip version 1.9.1 Libzip version 0.9.0 zlib ZLib Support enabled Stream Wrapper support compress.zlib:// Stream Filter support zlib.inflate, zlib.deflate Compiled Version 1.2.3 Linked Version 1.2.3 Directive Local Value Master Value zlib.output_compression Off Off zlib.output_compression_level -1 -1 zlib.output_handler no value no value Additional Modules Module Name Environment Variable Value no value ::=::\ no value C:=C:\xampp ALLUSERSPROFILE C:\Documents and Settings\All Users APPDATA C:\Documents and Settings\Andrew\Application Data CHROME_RESTART Google Chrome|Whoa! Google Chrome has crashed. Restart now?|LEFT_TO_RIGHT CHROME_VERSION 5.0.342.8 CLASSPATH .;C:\Program Files\QuickTime\QTSystem\QTJava.zip CommonProgramFiles C:\Program Files\Common Files COMPUTERNAME ANDREW_LAPTOP ComSpec C:\WINDOWS\system32\cmd.exe FP_NO_HOST_CHECK NO HOMEDRIVE C: HOMEPATH \Documents and Settings\Andrew LOGONSERVER \\ANDREW_LAPTOP NUMBER_OF_PROCESSORS 2 OS Windows_NT PATH C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin PATHEXT .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH PROCESSOR_ARCHITECTURE x86 PROCESSOR_IDENTIFIER x86 Family 6 Model 15 Stepping 10, GenuineIntel PROCESSOR_LEVEL 6 PROCESSOR_REVISION 0f0a ProgramFiles C:\Program Files PROMPT $P$G QTJAVA C:\Program Files\QuickTime\QTSystem\QTJava.zip SESSIONNAME Console sfxcmd "C:\Documents and Settings\Andrew\My Documents\Downloads\xampp-win32-1.7.3.exe" sfxname C:\Documents and Settings\Andrew\My Documents\Downloads\xampp-win32-1.7.3.exe SystemDrive C: SystemRoot C:\WINDOWS TEMP C:\DOCUME~1\Andrew\LOCALS~1\Temp TMP C:\DOCUME~1\Andrew\LOCALS~1\Temp USERDOMAIN ANDREW_LAPTOP USERNAME Andrew USERPROFILE C:\Documents and Settings\Andrew VS100COMNTOOLS C:\Program Files\Microsoft Visual Studio 10.0\Common7\Tools\ windir C:\WINDOWS AP_PARENT_PID 2216 PHP Variables Variable Value _SERVER["MIBDIRS"] C:/xampp/php/extras/mibs _SERVER["MYSQL_HOME"] C:\xampp\mysql\bin _SERVER["OPENSSL_CONF"] C:/xampp/apache/bin/openssl.cnf _SERVER["PHP_PEAR_SYSCONF_DIR"] C:\xampp\php _SERVER["PHPRC"] C:\xampp\php _SERVER["TMP"] C:\xampp\tmp _SERVER["HTTP_HOST"] localhost _SERVER["HTTP_CONNECTION"] keep-alive _SERVER["HTTP_USER_AGENT"] Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.2 (KHTML, like Gecko) Chrome/5.0.342.8 Safari/533.2 _SERVER["HTTP_CACHE_CONTROL"] max-age=0 _SERVER["HTTP_ACCEPT"] application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5 _SERVER["HTTP_ACCEPT_ENCODING"] gzip,deflate,sdch _SERVER["HTTP_ACCEPT_LANGUAGE"] en-US,en;q=0.8 _SERVER["HTTP_ACCEPT_CHARSET"] ISO-8859-1,utf-8;q=0.7,*;q=0.3 _SERVER["PATH"] C:\Documents and Settings\Andrew\Local Settings\Application Data\Google\Chrome\Application;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Common Files\DivX Shared\;C:\Program Files\WiTopia.Net\bin _SERVER["SystemRoot"] C:\WINDOWS _SERVER["COMSPEC"] C:\WINDOWS\system32\cmd.exe _SERVER["PATHEXT"] .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH _SERVER["WINDIR"] C:\WINDOWS _SERVER["SERVER_SIGNATURE"] <address>Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 Server at localhost Port 80</address> _SERVER["SERVER_SOFTWARE"] Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1 _SERVER["SERVER_NAME"] localhost _SERVER["SERVER_ADDR"] 127.0.0.1 _SERVER["SERVER_PORT"] 80 _SERVER["REMOTE_ADDR"] 127.0.0.1 _SERVER["DOCUMENT_ROOT"] C:/xampp/htdocs _SERVER["SERVER_ADMIN"] postmaster@localhost _SERVER["SCRIPT_FILENAME"] C:/xampp/htdocs/test.php _SERVER["REMOTE_PORT"] 3275 _SERVER["GATEWAY_INTERFACE"] CGI/1.1 _SERVER["SERVER_PROTOCOL"] HTTP/1.1 _SERVER["REQUEST_METHOD"] GET _SERVER["QUERY_STRING"] no value _SERVER["REQUEST_URI"] /test.php _SERVER["SCRIPT_NAME"] /test.php _SERVER["PHP_SELF"] /test.php _SERVER["REQUEST_TIME"] 1270600868 _SERVER["argv"] Array ( ) _SERVER["argc"] 0 PHP License This program is free software; you can redistribute it and/or modify it under the terms of the PHP License as published by the PHP Group and included in the distribution in the file: LICENSE This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. If you did not receive a copy of the PHP license, or have any questions about PHP licensing, please contact [email protected].

  Read the article

• IIRF reverse proxy problem

  - by Sergei

  Hi everyone, We have a java application ( Atlassian Bamboo) running on port 8085 on Windows 2003. It is accessile as http: //bamboo:8085. I am trying to setup reverse proxy for IIS6 using IIRF so content is accessible via http: //bamboo. It seems that I set it ip correctly, and I can retrieve Status page. This is how my IIRF.ini looks like: RewriteLog c:\temp\iirf RewriteLogLevel 2 StatusUrl /iirfStatus RewriteCond %{HTTP_HOST} ^bambooi$ [I] #This setup works #ProxyPass ^/(.*)$ http://othersite/$1 #This does not ProxyPass ^/(.*)$ http://bamboo:8085/$1 However when I type in http: //bamboo in IE, I get 'page cannot be displayed ' message. FF does not return anything at all. I made Wireshark network dump, selected 'follow TCPstream' and it seems like correct page is being retrieved.Why cannot I see it then? I also noticed that I can retrieve http: //bamboo/favicon.ico so I must be very close to the solution.. This is the Wireshark output: GET / HTTP/1.1 Accept: image/gif, image/jpeg, image/pjpeg, image/pjpeg, application/x-shockwave-flash, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, application/x-ms-application, application/x-ms-xbap, application/vnd.ms-xpsdocument, application/xaml+xml, */* Accept-Language: en-gb User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Accept-Encoding: gzip, deflate Host: bamboo Connection: Keep-Alive Cookie: JSESSIONID=wpsse0zyo4g5 HTTP/1.1 200 200 OK Date: Sat, 30 Jan 2010 09:19:46 GMT Server: Microsoft-IIS/6.0 Via: 1.1 DESTINATION_IP (IIRF 2.0) Content-Type: text/html; charset=utf-8 Transfer-Encoding: chunked <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en"> <head> <title>Dashboard</title> <meta http-equiv="content-type" content="text/html; charset=UTF-8" /> <meta name="robots" content="all" /> <meta name="MSSmartTagsPreventParsing" content="true" /> <meta http-equiv="Pragma" content="no-cache" /> <meta http-equiv="Expires" content="-1" /> <link type="text/css" rel="stylesheet" href="/s/1206/1/_/scripts/yui-2.6.0/build/grids/grids.css" /> <!--<link type="text/css" rel="stylesheet" href="/s/1206/1/_/scripts/yui/build/reset-fonts-grids/reset-fonts-grids.css" />--> <link rel="stylesheet" href="/s/1206/1/_/styles/main.css" type="text/css" /> <link rel="stylesheet" href="/s/1206/1/_/styles/main2.css" type="text/css" /> <link rel="stylesheet" href="/s/1206/1/_/styles/global-static.css" type="text/css" /> <link rel="stylesheet" href="/s/1206/1/_/styles/widePlanList.css" type="text/css" /> <link rel="stylesheet" href="/s/1206/1/_/styles/forms.css" type="text/css" /> <link rel="stylesheet" href="/s/1206/1/_/styles/yui-support/yui-custom.css" type="text/css" /> <link rel="shortcut icon" href="/s/1206/1/_/images/icons/favicon.ico" type="image/x-icon"/> <link rel="icon" href="/s/1206/1/_/images/icons/favicon.png" type="image/png" /> <link rel="stylesheet" href="/s/1206/1/_/styles/bamboo-tabs.css" type="text/css" /> <!-- Core YUI--> <link rel="stylesheet" type="text/css" href="/s/1206/1/_/scripts/yui-2.6.0/build/tabview/assets/tabview-core.css"> <link rel="stylesheet" type="text/css" href="/s/1206/1/_/scripts/yui-2.6.0/build/tabview/assets/skins/sam/tabview-skin.css"> <script type="text/javascript" src="/s/1206/1/_/scripts/yui-2.6.0/build/yahoo/yahoo-min.js"></script> <script type="text/javascript" src="/s/1206/1/_/scripts/yui-2.6.0/build/event/event-min.js" ></script> <script type="text/javascript" src="/s/1206/1/_/scripts/yui-2.6.0/build/dom/dom-min.js" ></script> <!--<script type="text/javascript" src="/s/1206/1/_/scripts/yui-2.6.0/build/animation/animation.js" ></script>--> <!-- Container --> <script type="text/javascript" src="/s/1206/1/_/scripts/yui-2.6.0/build/container/container-min.js"></script> <script type="text/javascript" src="/s/1206/1/_/scripts/yui-2.6.0/build/connection/connection-min.js"></script> <link type="text/css" rel="stylesheet" href="/s/1206/1/_/scripts/yui-2.6.0/build/container/assets/container.css" /> <!-- Menu --> <script type="text/javascript" src="/s/1206/1/_/scripts/yui-2.6.0/build/menu/menu-min.js"></script> <link type="text/css" rel="stylesheet" href="/s/1206/1/_/scripts/yui-2.6.0/build/menu/assets/menu.css" /> <!-- Tab view --> <!-- JavaScript Dependencies for Tabview: --> <script type="text/javascript" src="/s/1206/1/_/scripts/yui-2.6.0/build/yahoo-dom-event/yahoo-dom-event.js"></script> <script type="text/javascript" src="/s/1206/1/_/scripts/yui-2.6.0/build/element/element-beta-min.js"></script> <!-- Needed for old versions of the YUI --> <link rel="stylesheet" href="/s/1206/1/_/styles/yui-support/tabview.css" type="text/css" /> <link rel="stylesheet" href="/s/1206/1/_/styles/yui-support/round_tabs.css" type="text/css" /> <script type="text/javascript" src="/s/1206/1/_/scripts/yui-2.6.0/build/tabview/tabview-min.js"></script> <script type="text/javascript" src="/s/1206/1/_/scripts/yui-2.6.0/build/json/json-min.js"></script> <script type="text/javascript" src="/s/1206/1/_/scripts/yui-ext/yui-ext-nogrid.js"></script> <script type="text/javascript" src="/s/1206/1/_/scripts/bamboo.js"></script> <script type="text/javascript"> YAHOO.namespace('bamboo'); YAHOO.bamboo.tooltips = new Object(); YAHOO.bamboo.contextPath = ''; YAHOO.ext.UpdateManager.defaults.loadScripts = true; YAHOO.ext.UpdateManager.defaults.indicatorText = '<div class="loading-indicator">Currently loading...</div>'; YAHOO.ext.UpdateManager.defaults.timeout = 60; addUniversalOnload(addConfirmationToLinks); </script> <link rel="alternate" type="application/rss+xml" title="Bamboo RSS feed" href="/rss/createAllBuildsRssFeed.action?feedType=rssAll" /> </head> <body> <ul id="top"> <li id="skipNav"> <a href="#menu">Skip to navigation</a> </li> <li> <a href="#content">Skip to content</a> </li> </ul> <div id="nonFooter"> <div id="hd"> <div id="header"> <div id="logo"> <a href="/start.action"><img src="/images/bamboo_header_logo.gif" alt="Atlassian Bamboo" height="36" width="118" /></a> </div> <ul id="userOptions"> <li id="loginLink"> <a id="login" href="/userlogin!default.action?os_destination=%2Fstart.action">Log in</a> </li> <li id="signupLink"> <a id="signup" href="/signupUser!default.action">Signup</a> </li> <li id="helpLink"> <a id="help" href="http://confluence.atlassian.com/display/BAMBOO">Help</a> </li> </ul> </div> <!-- END #header --> <div id="menu"> <ul> <li><a id="home" href="/start.action" title="Atlassian Bamboo" accesskey="H"> <u>H</u>ome</a></li> <li><a id="authors" href="/authors/gotoAuthorReport.action" accesskey="U">A<u>u</u>thors</a></li> <li><a id="reports" href="/reports/viewReport.action" accesskey="R"> <u>R</u>eports</a></li> </ul> </div> <!-- END #menu --> </div> <!-- END #hd --> <div id="bd"> <div id="content"> <h1>Header here</h1> <div class="topMarginned"> <div id='buildSummaryTabs' class='dashboardTab'> </div> <script type="text/javascript"> function initUI(){ var jtabs = new YAHOO.ext.TabPanel('buildSummaryTabs'); YAHOO.bamboo.tabPanel = jtabs; // Use setUrl for Ajax loading var tab3 = jtabs.addTab('allTab', "All Plans"); tab3.setUrl('/ajax/displayAllBuildSummaries.action', null, true); var tab4 = jtabs.addTab("currentTab", "Current Activity"); tab4.setUrl('/ajax/displayCurrentActivity.action', null, true); var handleTabChange = function(e, activePanel) { saveCookie('atlassian.bamboo.dashboard.tab.selected', activePanel.id, 365); }; jtabs.on('tabchange', handleTabChange); var selectedCookie = getCookieValue('atlassian.bamboo.dashboard.tab.selected'); if (jtabs.getTab(selectedCookie)) { jtabs.activate(selectedCookie); } else { jtabs.activate('allTab'); } } YAHOO.util.Event.onContentReady('buildSummaryTabs', initUI); </script> </div> <script type="text/javascript"> setTimeout( "window.location.reload()", 1800*1000 ); </script> <div class="clearer" ></div> </div> <!-- END #content --> </div> <!-- END #bd --> </div> <!-- END #nonFooter --> <div id="ft"> <div id="footer"> <p> Powered by <a href="http://www.atlassian.com/software/bamboo/">Atlassian Bamboo</a> version 2.2.1 build 1206 - <span title="15:59:44 17 Mar 2009">17 Mar 09</span> </p> <ul> <li class="first"> <a href="https://support.atlassian.com/secure/CreateIssue.jspa?pid=10060&issuetype=1">Report a problem</a> </li> <li> <a href="http://jira.atlassian.com/secure/CreateIssue.jspa?pid=11011&issuetype=4">Request a feature</a> </li> <li> <a href="http://forums.atlassian.com/forum.jspa?forumID=103">Contact Atlassian</a> </li> <li> <a href="/viewAdministrators.action">Contact Administrators</a> </li> </ul> </div> <!-- END #footer --> </div> <!-- END #ft -->

  Read the article

• i am using winsock2.h in c language the following errors are unuderstandable help required?

  - by moon

  i am going to paste here my code an errors :::: #include "stdio.h" #include "winsock2.h" #define SIO_RCVALL _WSAIOW(IOC_VENDOR,1) //this removes the need of mstcpip.h void StartSniffing (SOCKET Sock); //This will sniff here and there void ProcessPacket (unsigned char* , int); //This will decide how to digest void PrintIpHeader (unsigned char* , int); void PrintUdpPacket (unsigned char* , int); void ConvertToHex (unsigned char* , unsigned int); void PrintData (unsigned char* , int); //IP Header Structure typedef struct ip_hdr { unsigned char ip_header_len:4; // 4-bit header length (in 32-bit words) normally=5 (Means 20 Bytes may be 24 also) unsigned char ip_version :4; // 4-bit IPv4 version unsigned char ip_tos; // IP type of service unsigned short ip_total_length; // Total length unsigned short ip_id; // Unique identifier unsigned char ip_frag_offset :5; // Fragment offset field unsigned char ip_more_fragment :1; unsigned char ip_dont_fragment :1; unsigned char ip_reserved_zero :1; unsigned char ip_frag_offset1; //fragment offset unsigned char ip_ttl; // Time to live unsigned char ip_protocol; // Protocol(TCP,UDP etc) unsigned short ip_checksum; // IP checksum unsigned int ip_srcaddr; // Source address unsigned int ip_destaddr; // Source address } IPV4_HDR; //UDP Header Structure typedef struct udp_hdr { unsigned short source_port; // Source port no. unsigned short dest_port; // Dest. port no. unsigned short udp_length; // Udp packet length unsigned short udp_checksum; // Udp checksum (optional) } UDP_HDR; //ICMP Header Structure typedef struct icmp_hdr { BYTE type; // ICMP Error type BYTE code; // Type sub code USHORT checksum; USHORT id; USHORT seq; } ICMP_HDR; FILE *logfile; int tcp=0,udp=0,icmp=0,others=0,igmp=0,total=0,i,j; struct sockaddr_in source,dest; char hex[2]; //Its free! IPV4_HDR *iphdr; UDP_HDR *udpheader; int main() { SOCKET sniffer; struct in_addr addr; int in; char hostname[100]; struct hostent *local; WSADATA wsa; //logfile=fopen("log.txt","w"); //if(logfile==NULL) printf("Unable to create file."); //Initialise Winsock printf("\nInitialising Winsock..."); if (WSAStartup(MAKEWORD(2,2), &wsa) != 0) { printf("WSAStartup() failed.\n"); return 1; } printf("Initialised"); //Create a RAW Socket printf("\nCreating RAW Socket..."); sniffer = socket(AF_INET, SOCK_RAW, IPPROTO_IP); if (sniffer == INVALID_SOCKET) { printf("Failed to create raw socket.\n"); return 1; } printf("Created."); //Retrive the local hostname if (gethostname(hostname, sizeof(hostname)) == SOCKET_ERROR) { printf("Error : %d",WSAGetLastError()); return 1; } printf("\nHost name : %s \n",hostname); //Retrive the available IPs of the local host local = gethostbyname(hostname); printf("\nAvailable Network Interfaces : \n"); if (local == NULL) { printf("Error : %d.\n",WSAGetLastError()); return 1; } for (i = 0; local->h_addr_list[i] != 0; ++i) { memcpy(&addr, local->h_addr_list[i], sizeof(struct in_addr)); printf("Interface Number : %d Address : %s\n",i,inet_ntoa(addr)); } printf("Enter the interface number you would like to sniff : "); scanf("%d",&in); memset(&dest, 0, sizeof(dest)); memcpy(&dest.sin_addr.s_addr,local->h_addr_list[in],sizeof(dest.sin_addr.s_addr)); dest.sin_family = AF_INET; dest.sin_port = 0; printf("\nBinding socket to local system and port 0 ..."); if (bind(sniffer,(struct sockaddr *)&dest,sizeof(dest)) == SOCKET_ERROR) { printf("bind(%s) failed.\n", inet_ntoa(addr)); return 1; } printf("Binding successful"); //Enable this socket with the power to sniff : SIO_RCVALL is the key Receive ALL ;) j=1; printf("\nSetting socket to sniff..."); if (WSAIoctl(sniffer, SIO_RCVALL,&j, sizeof(j), 0, 0,(LPDWORD)&in,0, 0) == SOCKET_ERROR) { printf("WSAIoctl() failed.\n"); return 1; } printf("Socket set."); //Begin printf("\nStarted Sniffing\n"); printf("Packet Capture Statistics...\n"); StartSniffing(sniffer); //Happy Sniffing //End closesocket(sniffer); WSACleanup(); return 0; } void StartSniffing(SOCKET sniffer) { unsigned char *Buffer = ( unsigned char *)malloc(65536); //Its Big! int mangobyte; if (Buffer == NULL) { printf("malloc() failed.\n"); return; } do { mangobyte = recvfrom(sniffer,(char *)Buffer,65536,0,0,0); //Eat as much as u can if(mangobyte > 0) ProcessPacket(Buffer, mangobyte); else printf( "recvfrom() failed.\n"); } while (mangobyte > 0); free(Buffer); } void ProcessPacket(unsigned char* Buffer, int Size) { iphdr = (IPV4_HDR *)Buffer; ++total; switch (iphdr->ip_protocol) //Check the Protocol and do accordingly... { case 1: //ICMP Protocol ++icmp; //PrintIcmpPacket(Buffer,Size); break; case 2: //IGMP Protocol ++igmp; break; case 6: //TCP Protocol ++tcp; //PrintTcpPacket(Buffer,Size); break; case 17: //UDP Protocol ++udp; PrintUdpPacket(Buffer,Size); break; default: //Some Other Protocol like ARP etc. ++others; break; } printf("TCP : %d UDP : %d ICMP : %d IGMP : %d Others : %d Total : %d\r",tcp,udp,icmp,igmp,others,total); } void PrintIpHeader (unsigned char* Buffer, int Size) { unsigned short iphdrlen; iphdr = (IPV4_HDR *)Buffer; iphdrlen = iphdr->ip_header_len*4; memset(&source, 0, sizeof(source)); source.sin_addr.s_addr = iphdr->ip_srcaddr; memset(&dest, 0, sizeof(dest)); dest.sin_addr.s_addr = iphdr->ip_destaddr; fprintf(logfile,"\n"); fprintf(logfile,"IP Header\n"); fprintf(logfile," |-IP Version : %d\n",(unsigned int)iphdr->ip_version); fprintf(logfile," |-IP Header Length : %d DWORDS or %d Bytes\n",(unsigned int)iphdr->ip_header_len); fprintf(logfile," |-Type Of Service : %d\n",(unsigned int)iphdr->ip_tos); fprintf(logfile," |-IP Total Length : %d Bytes(Size of Packet)\n",ntohs(iphdr->ip_total_length)); fprintf(logfile," |-Identification : %d\n",ntohs(iphdr->ip_id)); fprintf(logfile," |-Reserved ZERO Field : %d\n",(unsigned int)iphdr->ip_reserved_zero); fprintf(logfile," |-Dont Fragment Field : %d\n",(unsigned int)iphdr->ip_dont_fragment); fprintf(logfile," |-More Fragment Field : %d\n",(unsigned int)iphdr->ip_more_fragment); fprintf(logfile," |-TTL : %d\n",(unsigned int)iphdr->ip_ttl); fprintf(logfile," |-Protocol : %d\n",(unsigned int)iphdr->ip_protocol); fprintf(logfile," |-Checksum : %d\n",ntohs(iphdr->ip_checksum)); fprintf(logfile," |-Source IP : %s\n",inet_ntoa(source.sin_addr)); fprintf(logfile," |-Destination IP : %s\n",inet_ntoa(dest.sin_addr)); } void PrintUdpPacket(unsigned char *Buffer,int Size) { unsigned short iphdrlen; iphdr = (IPV4_HDR *)Buffer; iphdrlen = iphdr->ip_header_len*4; udpheader = (UDP_HDR *)(Buffer + iphdrlen); fprintf(logfile,"\n\n***********************UDP Packet*************************\n"); PrintIpHeader(Buffer,Size); fprintf(logfile,"\nUDP Header\n"); fprintf(logfile," |-Source Port : %d\n",ntohs(udpheader->source_port)); fprintf(logfile," |-Destination Port : %d\n",ntohs(udpheader->dest_port)); fprintf(logfile," |-UDP Length : %d\n",ntohs(udpheader->udp_length)); fprintf(logfile," |-UDP Checksum : %d\n",ntohs(udpheader->udp_checksum)); fprintf(logfile,"\n"); fprintf(logfile,"IP Header\n"); PrintData(Buffer,iphdrlen); fprintf(logfile,"UDP Header\n"); PrintData(Buffer+iphdrlen,sizeof(UDP_HDR)); fprintf(logfile,"Data Payload\n"); PrintData(Buffer+iphdrlen+sizeof(UDP_HDR) ,(Size - sizeof(UDP_HDR) - iphdr->ip_header_len*4)); fprintf(logfile,"\n###########################################################"); } void PrintData (unsigned char* data , int Size) { for(i=0 ; i < Size ; i++) { if( i!=0 && i%16==0) //if one line of hex printing is complete... { fprintf(logfile," "); for(j=i-16 ; j<i ; j++) { if(data[j]>=32 && data[j]<=128) fprintf(logfile,"%c",(unsigned char)data[j]); //if its a number or alphabet else fprintf(logfile,"."); //otherwise print a dot } fprintf(logfile,"\n"); } if(i%16==0) fprintf(logfile," "); fprintf(logfile," %02X",(unsigned int)data[i]); if( i==Size-1) //print the last spaces { for(j=0;j<15-i%16;j++) fprintf(logfile," "); //extra spaces fprintf(logfile," "); for(j=i-i%16 ; j<=i ; j++) { if(data[j]>=32 && data[j]<=128) fprintf(logfile,"%c",(unsigned char)data[j]); else fprintf(logfile,"."); } fprintf(logfile,"\n"); } } } following are the errors Error 1 error LNK2019: unresolved external symbol __imp__WSACleanup@0 referenced in function _main sniffer.obj sniffer test Error 2 error LNK2019: unresolved external symbol __imp__closesocket@4 referenced in function _main sniffer.obj sniffer test Error 3 error LNK2019: unresolved external symbol __imp__WSAIoctl@36 referenced in function _main sniffer.obj sniffer test Error 4 error LNK2019: unresolved external symbol __imp__bind@12 referenced in function _main sniffer.obj sniffer test Error 5 error LNK2019: unresolved external symbol __imp__inet_ntoa@4 referenced in function _main sniffer.obj sniffer test Error 6 error LNK2019: unresolved external symbol __imp__gethostbyname@4 referenced in function _main sniffer.obj sniffer test Error 7 error LNK2019: unresolved external symbol __imp__WSAGetLastError@0 referenced in function _main sniffer.obj sniffer test Error 8 error LNK2019: unresolved external symbol __imp__gethostname@8 referenced in function _main sniffer.obj sniffer test Error 9 error LNK2019: unresolved external symbol __imp__socket@12 referenced in function _main sniffer.obj sniffer test Error 10 error LNK2019: unresolved external symbol __imp__WSAStartup@8 referenced in function _main sniffer.obj sniffer test Error 11 error LNK2019: unresolved external symbol __imp__recvfrom@24 referenced in function "void __cdecl StartSniffing(unsigned int)" (?StartSniffing@@YAXI@Z) sniffer.obj sniffer test Error 12 error LNK2019: unresolved external symbol __imp__ntohs@4 referenced in function "void __cdecl PrintIpHeader(unsigned char *,int)" (?PrintIpHeader@@YAXPAEH@Z) sniffer.obj sniffer test Error 13 fatal error LNK1120: 12 unresolved externals E:\CWM\sniffer test\Debug\sniffer test.exe sniffer test

  Read the article

• Blank Mail from PHP application

  - by brettlwilliams

  Problem: Blank email from PHP web application. Confirmed: App works in Linux, has various problems in Windows server environment. Blank emails are the last remaining problem. PHP Version 5.2.6 on the server I'm a librarian implementing a PHP based web application to help students complete their assignments.I have installed this application before on a Linux based free web host and had no problems. Email is controlled by two files, email_functions.php and email.php. While email can be sent, all that is sent is a blank email. My IT department is an ASP only shop, so I can get little to no help there. I also cannot install additional libraries like PHPmail or Swiftmailer. You can see a functional copy at http://rpc.elm4you.org/ You can also download a copy from Sourceforge from the link there. Thanks in advance for any insight into this! email_functions.php <?php /********************************************************** Function: build_multipart_headers Author: Michael Berkowski Last Modified: September 2007 *********************************************************** Purpose: Creates email headers for a message of type multipart/mime This will include a plain text part and HTML. **********************************************************/ function build_multipart_headers($boundary_rand) { global $EMAIL_FROM_DISPLAY_NAME, $EMAIL_FROM_ADDRESS, $CALC_PATH, $CALC_TITLE, $SERVER_NAME; // Using \n instead of \r\n because qmail doubles up the \r and screws everything up! $crlf = "\n"; $message_date = date("r"); // Construct headers for multipart/mixed MIME email. It will have a plain text and HTML part $headers = "X-Calc-Name: $CALC_TITLE" . $crlf; $headers .= "X-Calc-Url: http://{$SERVER_NAME}/{$CALC_PATH}" . $crlf; $headers .= "MIME-Version: 1.0" . $crlf; $headers .= "Content-type: multipart/alternative;" . $crlf; $headers .= " boundary=__$boundary_rand" . $crlf; $headers .= "From: $EMAIL_FROM_DISPLAY_NAME <$EMAIL_FROM_ADDRESS>" . $crlf; $headers .= "Sender: $EMAIL_FROM_DISPLAY_NAME <$EMAIL_FROM_ADDRESS>" . $crlf; $headers .= "Reply-to: $EMAIL_FROM_DISPLAY_NAME <$EMAIL_FROM_ADDRESS>" . $crlf; $headers .= "Return-Path: $EMAIL_FROM_DISPLAY_NAME <$EMAIL_FROM_ADDRESS>" . $crlf; $headers .= "Date: $message_date" . $crlf; $headers .= "Message-Id: $boundary_rand@$SERVER_NAME" . $crlf; return $headers; } /********************************************************** Function: build_multipart_body Author: Michael Berkowski Last Modified: September 2007 *********************************************************** Purpose: Builds the email body content to go with the headers from build_multipart_headers() **********************************************************/ function build_multipart_body($plain_text_message, $html_message, $boundary_rand) { //$crlf = "\r\n"; $crlf = "\n"; $boundary = "__" . $boundary_rand; // Begin constructing the MIME multipart message $multipart_message = "This is a multipart message in MIME format." . $crlf . $crlf; $multipart_message .= "--{$boundary}{$crlf}Content-type: text/plain; charset=\"us-ascii\"{$crlf}Content-Transfer-Encoding: 7bit{$crlf}{$crlf}"; $multipart_message .= $plain_text_message . $crlf . $crlf; $multipart_message .= "--{$boundary}{$crlf}Content-type: text/html; charset=\"iso-8859-1\"{$crlf}Content-Transfer-Encoding: 7bit{$crlf}{$crlf}"; $multipart_message .= $html_message . $crlf . $crlf; $multipart_message .= "--{$boundary}--$crlf$crlf"; return $multipart_message; } /********************************************************** Function: build_step_email_body_text Author: Michael Berkowski Last Modified: September 2007 *********************************************************** Purpose: Returns a plain text version of the email body to be used for individually sent step reminders **********************************************************/ function build_step_email_body_text($stepnum, $arr_instructions, $dates, $query_string, $teacher_info ,$name, $class, $project_id) { global $CALC_PATH, $CALC_TITLE, $SERVER_NAME; $step_email_body =<<<BODY $CALC_TITLE Step $stepnum: {$arr_instructions["step$stepnum"]["title"]} Name: $name Class: $class BODY; $step_email_body .= build_text_single_step($stepnum, $arr_instructions, $dates, $query_string, $teacher_info); $step_email_body .= "\n\n"; $step_email_body .=<<<FOOTER The $CALC_TITLE offers suggestions, but be sure to check with your teacher to find out the best working schedule for your assignment! If you would like to stop receiving further reminders for this project, click the link below: http://$SERVER_NAME/$CALC_PATH/deleteproject.php?proj=$project_id FOOTER; // Wrap text to 78 chars per line // Convert any remaining HTML <br /> to \r\n // Strip out any remaining HTML tags. $step_email_body = strip_tags(linebreaks_html2text(wordwrap($step_email_body, 78, "\n"))); return $step_email_body; } /********************************************************** Function: build_step_email_body_html Author: Michael Berkowski Last Modified: September 2007 *********************************************************** Purpose: Same as above, but with HTML **********************************************************/ function build_step_email_body_html($stepnum, $arr_instructions, $dates, $query_string, $teacher_info, $name, $class, $project_id) { global $CALC_PATH, $CALC_TITLE, $SERVER_NAME; $styles = build_html_styles(); $step_email_body =<<<BODY <html> <head> <title> $CALC_TITLE </title> $styles </head> <body> <h1> $CALC_TITLE Schedule </h1> <strong>Name:</strong> $name <br /> <strong>Class:</strong> $class <br /> BODY; $step_email_body .= build_html_single_step($stepnum, $arr_instructions, $dates, $query_string, $teacher_info); $step_email_body .=<<<FOOTER <p> The $CALC_TITLE offers suggestions, but be sure to check with your teacher to find out the best working schedule for your assignment! </p> <p> If you would like to stop receiving further reminders for this project, <a href="http://{$SERVER_NAME}/$CALC_PATH/deleteproject.php?proj=$project_id">click this link.</a> </p> </body> </html> FOOTER; return $step_email_body; } /********************************************************** Function: build_html_styles Author: Michael Berkowski Last Modified: September 2007 *********************************************************** Purpose: Just returns a string of <style /> for the HTML message body **********************************************************/ function build_html_styles() { $styles =<<<STYLES <style type="text/css"> body { font-family: Arial, sans-serif; font-size: 85%; } h1 { font-size: 120%; } table { border: none; } tr { vertical-align: top; } img { display: none; } hr { border: 0; } </style> STYLES; return $styles; } /********************************************************** Function: linebreaks_html2text Author: Michael Berkowski Last Modified: October 2007 *********************************************************** Purpose: Convert <br /> html tags to \n line breaks **********************************************************/ function linebreaks_html2text($in_string) { $out_string = ""; $arr_br = array("<br>", "<br />", "<br/>"); $out_string = str_replace($arr_br, "\n", $in_string); return $out_string; } ?> email.php <?php require_once("include/config.php"); require_once("include/instructions.php"); require_once("dbase/dbfunctions.php"); require_once("include/email_functions.php"); ini_set("sendmail_from", "[email protected]"); ini_set("SMTP", "mail.qatar.net.qa"); // Verify that the email has not already been sent by checking for a cookie // whose value is generated each time the form is loaded freshly. if (!(isset($_COOKIE['rpc_transid']) && $_COOKIE['rpc_transid'] == $_POST['transid'])) { // Setup some preliminary variables for email. // The scanning of $_POST['email']already took place when this file was included... $to = $_POST['email']; $subject = $EMAIL_SUBJECT; $boundary_rand = md5(rand()); $mail_type = ""; switch ($_POST['reminder-type']) { case "progressive": $arr_dbase_dates = array(); $conn = rpc_connect(); if (!$conn) { $mail_success = FALSE; $mail_status_message = "Could not register address!"; break; } // Sanitize all the data that will be inserted into table... // We need to remove "CONTENT-TYPE:" from name/class to defang them. // Additionall, we can't allow any line-breaks in those fields to avoid // hacks to email headers. $ins_name = mysql_real_escape_string($name); $ins_name = eregi_replace("CONTENT-TYPE", "...Content_Type...", $ins_name); $ins_name = str_replace("\n", "", $ins_name); $ins_class = mysql_real_escape_string($class); $ins_class = eregi_replace("CONTENT-TYPE", "...Content_Type...", $ins_class); $ins_class = str_replace("\n", "", $ins_class); $ins_email = mysql_real_escape_string($email); $ins_teacher_info = $teacher_info ? "YES" : "NO"; switch ($format) { case "Slides": $ins_format = "SLIDES"; break; case "Video": $ins_format = "VIDEO"; break; case "Essay": default: $ins_format = "ESSAY"; break; } // The transid from the previous form will be used as a project identifier // Steps will be grouped by project identifier. $ins_project_id = mysql_real_escape_string($_POST['transid'] . md5(rand())); $arr_dbase_dates = dbase_dates($dates); $arr_past_dates = array(); // Iterate over the dates array and build a SQL statement for each one. $insert_success = TRUE; // $min_reminder_date = date("Ymd", mktime(0,0,0,date("m"),date("d")+$EMAIL_REMINDER_DAYS_AHEAD,date("Y"))); for ($date_index = 0; $date_index < sizeof($arr_dbase_dates); $date_index++) { // Make sure we're using the right keys... $ins_date_index = $date_index + 1; // The insert will only happen if the date of the event is in the future. // For dates today and earlier, no insert. // For dates today or after the reminder deadline, we'll send the email immediately after the inserts. if ($arr_dbase_dates[$date_index] > (int)$min_reminder_date) { $qry =<<<QRY INSERT INTO email_queue ( NOTIFICATION_ID, PROJECT_ID, EMAIL, NAME, CLASS, FORMAT, TEACHER_INFO, STEP, MESSAGE_DATE ) VALUES ( NULL, '$ins_project_id', '$ins_email', '$ins_name', '$ins_class', '$ins_format', '$ins_teacher_info', $ins_date_index, /*step number*/ {$arr_dbase_dates[$date_index]} /* Date in the integer format yyyymmdd */ ) QRY; // Attempt to do the insert... $result = mysql_query($qry); // If even one insert fails, bail out. if (!$result) { $mail_success = FALSE; $mail_status_message = "Could not register address!"; break; } } // For dates today or earlier, store the steps=>dates in an array so the mails can // be sent immediately. else { $arr_past_dates[$ins_date_index] = $arr_dbase_dates[$date_index]; } } // Close the connection resources. mysql_close($conn); // SEND OUT THE EMAILS THAT HAVE TO GO IMMEDIATELY... // This should only be step 1, but who knows... //var_dump($arr_past_dates); for ($stepnum=1; $stepnum<=sizeof($arr_past_dates); $stepnum++) { $email_teacher_info = ($teacher_info && $EMAIL_TEACHER_REMINDERS) ? TRUE : FALSE; $boundary = md5(rand()); $plain_text_body = build_step_email_body_text($stepnum, $arr_instructions, $dates, $query_string, $email_teacher_info ,$name, $class, $ins_project_id); $html_body = build_step_email_body_html($stepnum, $arr_instructions, $dates, $query_string, $email_teacher_info ,$name, $class, $ins_project_id); $multipart_headers = build_multipart_headers($boundary); $multipart_body = build_multipart_body($plain_text_body, $html_body, $boundary); mail($to, $subject . ": Step " . $stepnum, $multipart_body, $multipart_headers, "[email protected]"); } // Set appropriate flags and messages $mail_success = TRUE; $mail_status_message = "Email address registered!"; $mail_type = "progressive"; set_mail_success_cookie(); break; // Default to a single email message. case "single": default: // We don't want to send images in the message, so strip them out of the existing structure. // This big ugly regex strips the whole table cell containing the image out of the table. // Must find a better solution... //$email_table_html = eregi_replace("<td class=\"stepImageContainer\" width=\"161px\">[\s\r\n\t]*<img class=\"stepImage\" src=\"images/[_a-zA-Z0-9]*\.gif\" alt=\"Step [1-9]{1} logo\" />[\s\r\n\t]*</td>", "\n", $table_html); // Show more descriptive text based on the value of $format switch ($format) { case "Video": $format_display = "Video"; break; case "Slides": $format_display = "Presentation with electronic slides"; break; case "Essay": default: $format_display = "Essay"; break; } $days = (int)$days; $html_message = ""; $styles = build_html_styles(); $html_message =<<<HTMLMESSAGE <html> <head> <title> $CALC_TITLE </title> $styles </head> <body> <h1> $CALC_TITLE Schedule </h1> <strong>Name:</strong> $name <br /> <strong>Class:</strong> $class <br /> <strong>Email:</strong> $email <br /> <strong>Assignment type:</strong> $format_display <br /><br /> <strong>Starting on:</strong> $date1 <br /> <strong>Assignment due:</strong> $date2 <br /> <strong>You have $days days to finish.</strong><br /> <hr /> $email_table_html </body> </html> HTMLMESSAGE; // Create the plain text version of the message... $plain_text_message = strip_tags(linebreaks_html2text(build_text_all_steps($arr_instructions, $dates, $query_string, $teacher_info))); // Add the title, since it doesn't get built in by build_text_all_steps... $plain_text_message = $CALC_TITLE . " Schedule\n\n" . $plain_text_message; $plain_text_message = wordwrap($plain_text_message, 78, "\n"); $multipart_headers = build_multipart_headers($boundary_rand); $multipart_message = build_multipart_body($plain_text_message, $html_message, $boundary_rand); $mail_success = FALSE; if (mail($to, $subject, $multipart_message, $multipart_headers, "[email protected]")) { $mail_success = TRUE; $mail_status_message = "Email sent!"; $mail_type = "single"; set_mail_success_cookie(); } else { $mail_success = FALSE; $mail_status_message = "Could not send email!"; } break; } } function set_mail_success_cookie() { // Prevent the mail from being resent on page reload. Set a timestamp cookie. // Expires in 24 hours. setcookie("rpc_transid", $_POST['transid'], time() + 86400); } ?>

  Read the article

• Windows 7 laptop with two active network connections will not perform DNS AAAA lookup under certain conditions

  - by Jeff Loughridge

  My laptop has two network interfaces. The Ethernet interface connects directly to my provider's edge router. It obtains an IPv6 address via SLAAC. I manually set an IPv6 DNS server. The wireless interface connects to a CPE router that doesn't understand IPv6. If the wireless interface is disabled, I can reach the IPv6 Internet with no problems using the Ethernet interface. I run into problems when both interfaces are enabled and the wireless interface get its IPv4 DNS server via DHCP. Let's look at two scenarios. Wireless interface obtains IPv4 DNS server via DHCP - The CPE router (192.168.0.1) sends its address as the DNS server. In this scenario, Windows 7 will not perform AAAA lookups. The browser uses IPv4 transit to reach dual stack web sites. I can't reach IPv6-only web sites using domain names. I can reach IPv6-enabled web sites using IPv6 literals instead of the domain name. Wireless interface is manually configured with OpenDNS DNS server - Windows 7 performs AAAA lookups using IPv6 transit (via the Ethernet). Everything works fine. My dual homed set-up is definitely not standard. Still, the behavior is very strange to me. A valid IPv6 interface exists in my Ethernet interface. Why won't Windows attempt AAAA lookups in scenario #1? I've included the output of ipconfig /all and netstat -rn. C:\Program Files\Console>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : jake Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : res.openband.net Wireless LAN adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter Physical Address. . . . . . . . . : C0-CB-38-06-54-F9 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : res.openband.net Description . . . . . . . . . . . : DW1520 Wireless-N WLAN Half-Mini Card Physical Address. . . . . . . . . : C0-CB-38-06-54-F9 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::fc39:9293:7d01:4a75%13(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.105(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Wednesday, July 11, 2012 7:35:21 AM Lease Expires . . . . . . . . . . : Thursday, July 12, 2012 9:49:46 AM Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DHCPv6 IAID . . . . . . . . . . . : 364956472 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-80-F8-14-5C-26-0A-03-23-5C DNS Servers . . . . . . . . . . . : 208.67.222.222 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : res.openband.net Description . . . . . . . . . . . : Intel(R) 82577LM Gigabit Network Connection Physical Address. . . . . . . . . : 5C-26-0A-03-23-5C DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2607:2600:1:850:c0e9:211a:fd05:4e0b(Preferred) Temporary IPv6 Address. . . . . . : 2607:2600:1:850:3d29:1839:62db:c4c1(Preferred) Link-local IPv6 Address . . . . . : fe80::c0e9:211a:fd05:4e0b%12(Preferred) IPv4 Address. . . . . . . . . . . : 10.52.2.51(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.254.0 Lease Obtained. . . . . . . . . . : Monday, July 09, 2012 8:55:07 AM Lease Expires . . . . . . . . . . : Thursday, July 12, 2012 7:30:05 AM Default Gateway . . . . . . . . . : fe80::214:6aff:fe51:7f3f%12 10.52.2.1 DHCP Server . . . . . . . . . . . : 216.40.77.244 DNS Servers . . . . . . . . . . . : 2620:0:ccc::2 2620:0:ccd::2 216.40.77.126 216.40.77.244 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1 Physical Address. . . . . . . . . : 00-50-56-C0-00-01 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::4c61:495b:229e:281e%14(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.40.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 469782614 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-80-F8-14-5C-26-0A-03-23-5C DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VMware Network Adapter VMnet8: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8 Physical Address. . . . . . . . . : 00-50-56-C0-00-08 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::f996:61eb:8c00:45e6%15(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.17.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 486559830 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-80-F8-14-5C-26-0A-03-23-5C DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled C:\Program Files\Console>netstat -rn =========================================================================== Interface List 17...c0 cb 38 06 54 f9 ......Microsoft Virtual WiFi Miniport Adapter 13...c0 cb 38 06 54 f9 ......DW1520 Wireless-N WLAN Half-Mini Card 12...5c 26 0a 03 23 5c ......Intel(R) 82577LM Gigabit Network Connection 11...5c ac 4c f8 b8 55 ......Bluetooth Device (Personal Area Network) 14...00 50 56 c0 00 01 ......VMware Virtual Ethernet Adapter for VMnet1 15...00 50 56 c0 00 08 ......VMware Virtual Ethernet Adapter for VMnet8 1...........................Software Loopback Interface 1 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.52.2.1 10.52.2.51 10 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.105 100 10.52.2.0 255.255.254.0 On-link 10.52.2.51 261 10.52.2.51 255.255.255.255 On-link 10.52.2.51 261 10.52.3.255 255.255.255.255 On-link 10.52.2.51 261 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 On-link 192.168.0.105 306 192.168.0.105 255.255.255.255 On-link 192.168.0.105 306 192.168.0.255 255.255.255.255 On-link 192.168.0.105 306 192.168.17.0 255.255.255.0 On-link 192.168.17.1 276 192.168.17.1 255.255.255.255 On-link 192.168.17.1 276 192.168.17.255 255.255.255.255 On-link 192.168.17.1 276 192.168.40.0 255.255.255.0 On-link 192.168.40.1 276 192.168.40.1 255.255.255.255 On-link 192.168.40.1 276 192.168.40.255 255.255.255.255 On-link 192.168.40.1 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.52.2.51 261 224.0.0.0 240.0.0.0 On-link 192.168.0.105 306 224.0.0.0 240.0.0.0 On-link 192.168.40.1 276 224.0.0.0 240.0.0.0 On-link 192.168.17.1 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.52.2.51 261 255.255.255.255 255.255.255.255 On-link 192.168.0.105 306 255.255.255.255 255.255.255.255 On-link 192.168.40.1 276 255.255.255.255 255.255.255.255 On-link 192.168.17.1 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 12 261 ::/0 fe80::214:6aff:fe51:7f3f 1 306 ::1/128 On-link 12 13 2607:2600:1:850::/64 On-link 12 261 2607:2600:1:850:3d29:1839:62db:c4c1/128 On-link 12 261 2607:2600:1:850:c0e9:211a:fd05:4e0b/128 On-link 12 261 fe80::/64 On-link 13 281 fe80::/64 On-link 14 276 fe80::/64 On-link 15 276 fe80::/64 On-link 14 276 fe80::4c61:495b:229e:281e/128 On-link 12 261 fe80::c0e9:211a:fd05:4e0b/128 On-link 15 276 fe80::f996:61eb:8c00:45e6/128 On-link 13 281 fe80::fc39:9293:7d01:4a75/128 On-link 1 306 ff00::/8 On-link 12 261 ff00::/8 On-link 13 281 ff00::/8 On-link 14 276 ff00::/8 On-link 15 276 ff00::/8 On-link =========================================================================== Persistent Routes: None

  Read the article

• Failed to resolve artifact. Missing: ---------- 1) org.codehaus.mojo:gwt-maven-plugin:jar:1.3-SNAPSHOT

  - by karim

  i want to use the addon vaadin Timeline, so i have to make "gwt-maven-plugin 3.1" as i know ,my pom.xml is the following : <?xml version="1.0"?> <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd"> <modelVersion>4.0.0</modelVersion> <groupId>life</groupId> <artifactId>life</artifactId> <packaging>war</packaging> <name>life Portlet</name> <version>0.0.1-SNAPSHOT</version> <url>http://maven.apache.org</url> <properties> <vaadin-widgets-dir>src/main/webapp/VAADIN/widgetsets</vaadin-widgets-dir> </properties> <build> <plugins> <plugin> <groupId>com.liferay.maven.plugins</groupId> <artifactId>liferay-maven-plugin</artifactId> <version>6.1.0</version> <configuration> <autoDeployDir>${liferay.auto.deploy.dir}</autoDeployDir> <liferayVersion>6.1.0</liferayVersion> <pluginType>portlet</pluginType> </configuration> </plugin> <plugin> <artifactId>maven-compiler-plugin</artifactId> <configuration> <encoding>UTF-8</encoding> <source>1.5</source> <target>1.5</target> </configuration> </plugin> <plugin> <groupId>com.vaadin</groupId> <artifactId>vaadin-maven-plugin</artifactId> <version>1.0.1</version> </plugin> <!-- Compiles your custom GWT components with the GWT compiler --> <plugin> <groupId>org.codehaus.mojo</groupId> <artifactId>gwt-maven-plugin</artifactId> <version>2.1.0-1</version> <configuration> <!-- if you don't specify any modules, the plugin will find them --> <!--modules> .. </modules --> <webappDirectory>${project.build.directory}/${project.build.finalName}/VAADIN/widgetsets</webappDirectory> <extraJvmArgs>-Xmx512M -Xss1024k</extraJvmArgs> <runTarget>clean</runTarget> <hostedWebapp>${project.build.directory}/${project.build.finalName}</hostedWebapp> <noServer>true</noServer> <port>8080</port> <soyc>false</soyc> </configuration> <executions> <execution> <goals> <goal>resources</goal> <goal>compile</goal> </goals> </execution> </executions> </plugin> <!-- Updates Vaadin 6.2+ widgetset definitions based on project dependencies --> <plugin> <groupId>com.vaadin</groupId> <artifactId>vaadin-maven-plugin</artifactId> <version>1.0.1</version> <executions> <execution> <configuration> <!-- if you don't specify any modules, the plugin will find them --> <!-- <modules> <module>${package}.gwt.MyWidgetSet</module> </modules> --> </configuration> <goals> <goal>update-widgetset</goal> </goals> </execution> </executions> </plugin> </plugins> <pluginManagement> <plugins> <!--This plugin's configuration is used to store Eclipse m2e settings only. It has no influence on the Maven build itself. --> <plugin> <groupId>org.eclipse.m2e</groupId> <artifactId>lifecycle-mapping</artifactId> <version>1.0.0</version> <configuration> <lifecycleMappingMetadata> <pluginExecutions> <pluginExecution> <pluginExecutionFilter> <groupId> org.codehaus.mojo </groupId> <artifactId> gwt-maven-plugin </artifactId> <versionRange> [2.1.0-1,) </versionRange> <goals> <goal>resources</goal> </goals> </pluginExecutionFilter> <action> <ignore></ignore> </action> </pluginExecution> <pluginExecution> <pluginExecutionFilter> <groupId>com.vaadin</groupId> <artifactId> vaadin-maven-plugin </artifactId> <versionRange> [1.0.1,) </versionRange> <goals> <goal> update-widgetset </goal> </goals> </pluginExecutionFilter> <action> <ignore></ignore> </action> </pluginExecution> </pluginExecutions> </lifecycleMappingMetadata> </configuration> </plugin> </plugins> </pluginManagement> </build> <dependencies> <dependency> <groupId>com.liferay.portal</groupId> <artifactId>portal-service</artifactId> <version>6.1.0</version> <scope>provided</scope> </dependency> <dependency> <groupId>com.liferay.portal</groupId> <artifactId>util-bridges</artifactId> <version>6.1.0</version> <scope>provided</scope> </dependency> <dependency> <groupId>org.vaadin.addons</groupId> <artifactId>vaadin-timeline-agpl-3.0</artifactId> <version>1.2.4</version> </dependency> <dependency> <groupId>com.liferay.portal</groupId> <artifactId>util-taglib</artifactId> <version>6.1.0</version> <scope>provided</scope> </dependency> <dependency> <groupId>com.liferay.portal</groupId> <artifactId>util-java</artifactId> <version>6.1.0</version> <scope>provided</scope> </dependency> <dependency> <groupId>javax.portlet</groupId> <artifactId>portlet-api</artifactId> <version>2.0</version> <scope>provided</scope> </dependency> <dependency> <groupId>javax.servlet</groupId> <artifactId>servlet-api</artifactId> <version>2.4</version> <scope>provided</scope> </dependency> <dependency> <groupId>javax.servlet.jsp</groupId> <artifactId>jsp-api</artifactId> <version>2.0</version> <scope>provided</scope> </dependency> <!-- sqx --> <dependency> <groupId>javax.activation</groupId> <artifactId>activation</artifactId> <version>1.1.1</version> <scope>provided</scope> </dependency> <dependency> <groupId>antlr</groupId> <artifactId>antlr</artifactId> <version>2.7.6</version> <scope>provided</scope> </dependency> <dependency> <groupId>aopalliance</groupId> <artifactId>aopalliance</artifactId> <version>1.0</version> <scope>provided</scope> </dependency> <dependency> <groupId>asm</groupId> <artifactId>asm</artifactId> <version>1.5.3</version> <scope>provided</scope> </dependency> <dependency> <groupId>asm</groupId> <artifactId>asm-attrs</artifactId> <version>1.5.3</version> <scope>provided</scope> </dependency> <dependency> <groupId>org.aspectj</groupId> <artifactId>aspectjrt</artifactId> <version>1.6.8</version> <scope>provided</scope> </dependency> <dependency> <groupId>org.aspectj</groupId> <artifactId>aspectjweaver</artifactId> <version>1.6.8</version> <scope>provided</scope> </dependency> <dependency> <groupId>bsh</groupId> <artifactId>bsh</artifactId> <version>1.3.0</version> <scope>provided</scope> </dependency> <dependency> <groupId>cglib</groupId> <artifactId>cglib</artifactId> <version>2.1_3</version> <scope>provided</scope> </dependency> <dependency> <groupId>commons-collections</groupId> <artifactId>commons-collections</artifactId> <version>3.1</version> <scope>provided</scope> </dependency> <dependency> <groupId>commons-dbcp</groupId> <artifactId>commons-dbcp</artifactId> <version>1.3</version> </dependency> <dependency> <groupId>commons-logging</groupId> <artifactId>commons-logging</artifactId> <version>1.1</version> </dependency> <dependency> <groupId>commons-pool</groupId> <artifactId>commons-pool</artifactId> <version>1.5.3</version> </dependency> <dependency> <groupId>dom4j</groupId> <artifactId>dom4j</artifactId> <version>1.6.1</version> </dependency> <dependency> <groupId>net.sf.ehcache</groupId> <artifactId>ehcache</artifactId> <version>1.2.3</version> </dependency> <dependency> <groupId>org.hibernate</groupId> <artifactId>hibernate-core</artifactId> <version>3.3.1.GA</version> </dependency> <dependency> <groupId>hsqldb</groupId> <artifactId>hsqldb</artifactId> <version>1.8.0.10</version> </dependency> <!-- <dependency> <groupId>jboss</groupId> <artifactId>jboss-backport-concurrent</artifactId> <version>2.1.0.GA</version> </dependency> --> <dependency> <groupId>org.slf4j</groupId> <artifactId>slf4j-parent</artifactId> <version>1.5.0</version> </dependency> <dependency> <groupId>javax.jcr</groupId> <artifactId>jcr</artifactId> <version>1.0</version> </dependency> <!-- <dependency> <groupId>javax.sql</groupId> <artifactId>jdbc-stdext</artifactId> <version>2.0</version> </dependency> --> <dependency> <groupId>jdom</groupId> <artifactId>jdom</artifactId> <version>1.0</version> </dependency> <dependency> <groupId>javax.transaction</groupId> <artifactId>jta</artifactId> <version>1.1</version> </dependency> <dependency> <groupId>log4j</groupId> <artifactId>log4j</artifactId> <version>1.2.14</version> </dependency> <dependency> <groupId>javax.mail</groupId> <artifactId>mail</artifactId> <version>1.4.3</version> </dependency> <dependency> <groupId>com.sun.portal.portletcontainer</groupId> <artifactId>container</artifactId> <version>1.1-m4</version> </dependency> <dependency> <groupId>postgresql</groupId> <artifactId>postgresql</artifactId> <version>8.4-702.jdbc3</version> </dependency> <!-- sl4j-api-1.5.0 manquante --> <dependency> <groupId>org.slf4j</groupId> <artifactId>slf4j-parent</artifactId> <version>1.5.0</version> </dependency> <dependency> <groupId>org.slf4j</groupId> <artifactId>slf4j-log4j12</artifactId> <version>1.5.0</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-aop</artifactId> <version>2.5.6</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-aspects</artifactId> <version>3.0.3.RELEASE</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-beans</artifactId> <version>2.5.6</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-context</artifactId> <version>2.5.6</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-context-support</artifactId> <version>2.5.6</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-core</artifactId> <version>2.5.6</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-jdbc</artifactId> <version>2.5.6</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-jms</artifactId> <version>2.5.6</version> </dependency> <dependency> <groupId>javax.jms</groupId> <artifactId>jms</artifactId> <version>1.1</version> <scope>compile</scope> </dependency> <!-- <dependency> <groupId>org.springmodules</groupId> <artifactId>spring-modules-jbpm31</artifactId> <version>0.9</version> <scope>provided</scope> </dependency> --> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-orm</artifactId> <version>2.5.6</version> </dependency> <dependency> <groupId>org.springframework.ws</groupId> <artifactId>spring-oxm</artifactId> <version>1.5.0</version> <scope>provided</scope> </dependency> <dependency> <groupId>org.springframework.security</groupId> <artifactId>spring-security-core</artifactId> <version>2.0.4</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-tx</artifactId> <version>2.5.6</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-web</artifactId> <version>2.5.6</version> </dependency> <dependency> <groupId>org.springframework</groupId> <artifactId>spring-webmvc-portlet</artifactId> <version>2.5</version> </dependency> <dependency> <groupId>com.atomikos</groupId> <artifactId>transactions-hibernate3</artifactId> <version>3.6.4</version> </dependency> <dependency> <groupId>com.atomikos</groupId> <artifactId>transactions-osgi</artifactId> <version>3.7.0</version> </dependency> <dependency> <groupId>com.vaadin</groupId> <artifactId>vaadin</artifactId> <version>6.7.0</version> </dependency> <dependency> <groupId>com.thoughtworks.xstream</groupId> <artifactId>xstream</artifactId> <version>1.3.1</version> </dependency> <!-- this is the dependency to the "jar"-subproject --> <dependency> <groupId>org.codehaus.plexus</groupId> <artifactId>plexus-utils</artifactId> <version>1.5.9</version> </dependency> <dependency> <groupId>com.google.gwt</groupId> <artifactId>gwt-user</artifactId> <version>2.1.1</version> <scope>provided</scope> </dependency> </dependencies> <!-- Define our plugin repositories --> <pluginRepositories> <pluginRepository> <id>Codehaus</id> <name>Codehaus Maven Plugin Repository</name> <url>http://repository.codehaus.org/org/codehaus/mojo</url> <snapshots> <enabled>true</enabled> </snapshots> </pluginRepository> <pluginRepository> <id>codehaus-snapshots</id> <url>[http://nexus.codehaus.org/snapshots]</url> <snapshots> <enabled>true</enabled> </snapshots> <releases> <enabled>false</enabled> </releases> </pluginRepository> </pluginRepositories> <repositories> <repository> <id>vaadin-addons</id> <url>http://maven.vaadin.com/vaadin-addons</url> </repository> <repository> <id>demoiselle.sourceforge.net</id> <name>Demoiselle Maven Repository</name> <url>http://demoiselle.sourceforge.net/repository/release</url> </repository> </repositories> AND when i do "clean install" to build my mvn , the console show me this taken : [INFO] Unable to find resource 'org.codehaus.mojo:gwt-maven-plugin:jar:1.3-SNAPSHOT' in repository demoiselle.sourceforge.net (http://demoiselle.sourceforge.net/repository/release) [INFO] ------------------------------------------------------------------------ [ERROR] BUILD ERROR [INFO] ------------------------------------------------------------------------ [INFO] Failed to resolve artifact. Missing: ---------- 1) org.codehaus.mojo:gwt-maven-plugin:jar:1.3-SNAPSHOT Try downloading the file manually from the project website. Then, install it using the command: mvn install:install-file -DgroupId=org.codehaus.mojo -DartifactId=gwt-maven-plugin - Dversion=1.3-SNAPSHOT -Dpackaging=jar -Dfile=/path/to/file Alternatively, if you host your own repository you can deploy the file there: mvn deploy:deploy-file -DgroupId=org.codehaus.mojo -DartifactId=gwt-maven-plugin -Dversion=1.3-SNAPSHOT -Dpackaging=jar -Dfile=/path/to/file -Durl=[url] -DrepositoryId=[id] Path to dependency: 1) com.vaadin:vaadin-maven-plugin:maven-plugin:1.0.1 2) org.codehaus.mojo:gwt-maven-plugin:jar:1.3-SNAPSHOT ---------- 1 required artifact is missing. for artifact: com.vaadin:vaadin-maven-plugin:maven-plugin:1.0.1 from the specified remote repositories: demoiselle.sourceforge.net (http://demoiselle.sourceforge.net/repository/release), central (http://repo1.maven.org/maven2), Codehaus (http://repository.codehaus.org/org/codehaus/mojo), codehaus-snapshots ([http://nexus.codehaus.org/snapshots]), vaadin-snapshots (http://oss.sonatype.org/content/repositories/vaadin-snapshots/), vaadin-releases (http://oss.sonatype.org/content/repositories/vaadin-releases/), vaadin-addons (http://maven.vaadin.com/vaadin-addons) your help will be welcome thank you a lot !!! :)))

  Read the article

< Previous Page | 498 499 500 501 502