Search Results

Search found 16948 results on 678 pages for 'static analysis'.

Page 502/678 | < Previous Page | 498 499 500 501 502 503 504 505 506 507 508 509  | Next Page >

• DNS slow after losing DNS Server

  - by Tim

  We have set up a small Windows Server 2008 R2 network with a domain controller which is also acting as the DNS server for the network (we opted to install DNS when setting up the domain). This network isn't connected to the Internet in any way, so all machines have been configured to use the IP address of the domain controller as their primary DNS and no secondary DNS server has been configured. If we shut down or unplug the network cable from the domain controller, DNS lookups become quite slow and the performance of the network suffers. For example, running a ping command using a hostname takes around 5-6 seconds to resolve the name. I presume this is because it is looking for the DNS, then falling back to some other method of resolving the names as the DNS server is now gone. All the machines have static IP addresses so we are considering just putting all entries in the HOSTS file of each machine. However, it would be nice to have a centralised DNS in case we one day change the IP of one of the machines. Is there a better way to speed this up?

  Read the article

• Gitlab and Nginx not loading gitlab

  - by paperids

  I have just installed gitlab and nginx on Ubuntu LTS 12.04 using this guide: http://blog.compunet.co.za/gitlab-installation-on-ubuntu-server-12-04/ I installed this on another server last night and had absolutely no problems with it (sort of a test run to see how long it would take to get going). I am not getting any errors when restarting gitlab or nginx with /etc/init.d and my error logs are empty. The only thing I know of to go on is the vhost config: upstream gitlab { server unix:/home/gitlab/gitlab/tmp/sockets/gitlab.sock$ } server { listen localhost:80; server_name gitlab.bluringdev.com; root /home/gitlab/gitlab/public; # individual nginx logs for this gitlab vhost access_log /var/log/nginx/gitlab_access.log; error_log /var/log/nginx/gitlab_error.log; location / { # serve static files from defined root folder;. # @gitlab is a named location for the upstream fallback$ try_files $uri $uri/index.html $uri.html @gitlab; } # if a file, which is not found in the root folder is r$ # then the proxy pass the request to the upsteam (gitla$ location @gitlab { proxy_redirect off; # you need to change this to "https", if you set "ssl" $ proxy_set_header X-FORWARDED_PROTO http; proxy_set_header Host gitlab.bluringdev.com:80; proxy_set_header X-Real-IP $remote_addr; proxy_pass http://gitlab; } } If there's any other information that would be helpful, just let me know and I'll get it up asap.

  Read the article

• "Could not claim interface on camera: -6" when trying to connect usb camera (Kinect)

  - by rzetterberg

  I have installed the freenect library from openkinect.org. With that library there is a demo application which you can run from the terminal to test out the Kinect. However when I run this command I get the following output: richard@behemoth:~$ sudo freenect-glview Kinect camera test Number of devices found: 1 Could not claim interface on camera: -6 Could not open device This particular error is thrown by the library libusb by the function libusb_claim_interface and the error -6 corresponds to the LIBUSB_ERROR_BUSY. So my guess is that it has something to do with mounting the usb, rather than specifically the freenect library or the Kinect itself. So my question is how can I find out what resource is using this interface and how can I free it so that I can access it? Edit: What I have tried so far (just to be sure): Rebooted Plugged-out, plugged-in Tried different usb ports Restarted udev Additional information that might be useful: /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=1c73f217-ac8d-451b-8390-7a680628a856 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=bb49bd29-07ec-45a0-bbab-46fb8362b06b none swap sw 0 0 sudo uname -r: Linux behemoth 3.0.0-14-generic-pae #23-Ubuntu SMP Mon Nov 21 22:07:10 UTC 2011 i686 i686 i386 GNU/Linux cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=11.10 DISTRIB_CODENAME=oneiric DISTRIB_DESCRIPTION="Ubuntu 11.10"

  Read the article

• pfSense Firewall or Linsys/Cisco router for small offices

  - by Tim Meers

  I'm about to start switching some networks around for multiple small offices. Each office has about 10 to 15 users and 10 to 15 computers. Each office has a spread of generic routers and access points. The routers vary from being used as routers, to just being an access point for wireless. Nothing formal has really ever beem implemented for each of the 10 offices. What I'm wanting is to set up a pfSense box for each office to configure things like: traffic shaping (for VoIP QOS) URL Filtering DHCP static routing multiple VLANs I'll then use some of the existing hardware for wireless. Maybe even integrate the wireless right into the firewall depending on the office layout. So my question, would this be better to do a full blown firewall box, or but a new business class or high end consumer class Linksys router to do the URL filtering, QOS and DHPC? Each option could allow for remote access and VPN for remote maintnance and each would only cost a nominal about of money for something decent, i.e. under $250.

  Read the article

• Disabling DNS Registration on Server 2008 R2

  - by WaldenL

  I want to tell a server 2008 R2 machine to NOT register it's IP addresses in DNS. I go into the Advanced tab on IPv4 and turn off "Register this connection's addresses in DNS" simple! But... the addresses are updated in DNS anyway! And actually the A record is eventually removed from the DNS server. I've confirmed that the checkbox is off by looking at it myself, and by checking the RegistrationEnabled registry value for that adapter. Both confirm that the registration is off. I've turned of DNS debug logging on the DNS server and I can see DNS Update requests coming from the server in question! This should not happen. What's even odder is that eventually (several hours) the A record for the server (which I added by hand!) is removed from the DNS server. I've also confirmed that scavaging is off on both DNS servers in the domain. Ideas? Edits: Per the comment: The server has static IP addresses. However, it's got two of them on one adapter. Since I'm in a VM (HyperV) environment I just spun up a second adapter and moved the second IP to the second adapter. I set the first adapter to auto-register (since that's the IP I want anyway) and the second adapter to NOT auto-register. We'll see if this is any better. Not any better. On a reboot of the server the registration was removed from DNS. Seems both cards are still contacting the server. Based on the DNS log the card that shouldn't register in DNS is registering a 'delete' request. And then the card that should register is registering an add request but that's ignored. I'm totally confused at this point.

  Read the article

• Move sendmail from Fedora 1 to a different server ( fedora 12)

  - by tanieboy4u

  We have a sendmail server that also works as DHCP, DNS, and a gateway to our ISP. It has three network interfaces, one for our ISP ( static IP) and the other two is for LANS on different subnet. The hardware is quite old and we've been experiencing downtime due to hardware failures, so we have decided to upgrade the hardware and while at it upgrade the linux OS to Fedora 12. Were trying to do this with minimal downtime. We are planning to take these steps. Install New OS (Fedora 12) on the new server with 3 network interfaces. Install DHCP, BIND, Sendmail, SpamAssassin, MailScanner, Dovecot, Squirrelmail on the new server. Transfer settings from the old server to the new server. ( This is the hardest part that we know). For DHCP and DNS, we can just copy the dhcp leases and conf file and everything should work right? How do we go about moving the users/email accounts from the old server to the new one? Thanks for all your help!

  Read the article

• ICMP Redirect Theory VS. Application

  - by joeqwerty

  I'm trying to watch ICMP redirects in a lab using Cisco Packet Tracer (version 5.3.2) and I'm not seeing them, which leads me to believe that either my lab configuration isn't correct or my understanding of ICMP redirects isn't correct or that Packet Tracer doesn't support/use ICMP redirects. Here's what I believe to be true regarding ICMP redirects: Routers send ICMP redirects when all of these conditions are met: The interface on which the packet comes into the router is the same interface on which the packet gets routed out. The subnet or network of the source IP address is on the same subnet or network of the next-hop IP address of the routed packet. The datagram is not source-routed. The router kernel is configured to send redirects. I have the lab set up in Cisco Packet Tracer as displayed in the image and would expect to see an ICMP redirect from Router1 when pinging from PC1 to PC3. I'm not seeing the ICMP redirect and it looks like Router1 is actually routing all of the packets via Router2. I have IP ICMP debugging enabled on Router1 (and Router2) and I'm not seeing any ICMP redirect activity in either console. I'm also not seeing a route to the PC3 network in the routing table on PC1, which I think confirms that the ICMP redirect is not occurring. I'm using only static routing on Routers 1 and 2. Is my understanding of ICMP redirects incorrect, or is there a problem with my lab configuration or does Packet Tracer not support/use ICMP redirects?

  Read the article

• Can you use SQLite 64 bit odbc from powershell

  - by Levin Magruder

  Basically, my question is "Does this combo work for anyone," and, "Can you see what I am doing wrong" I have installed 64 bit ODBC driver for sqlite, downloaded from this page. I am running powershell version 2 on window 7. In ODBC configuration I create a system DSN with name LoveBoat, pointing at a valid file. I don't have any "real" apps to test whether the ODBC connection works, but a simple program I list below works. However, with PowerShell, which is what I want: $x = new-object System.Data.Odbc.OdbcConnection("DSN=LoveBoat") $x.open() That yields the error: Exception calling "Open" with "0" argument(s): "The type initializer for 'System.Transactions.Diagnostics.DiagnosticTrace' threw an exception." At line:1 char:8 + $x.Open <<<< () + CategoryInfo : NotSpecified: (:) [], MethodInvocationException + FullyQualifiedErrorId : DotNetMethodException On the other hand the test program below runs and prints out the expected data. using System.Data.Odbc; using System.Data; using System; public class program { public static void Main(string[] args) { OdbcConnection conn = new OdbcConnection(@"DSN=LoveBoat"); conn.Open(); OdbcCommand comm = new OdbcCommand(); comm.CommandText= "SELECT Name From Myfavoritetable"; comm.Connection = conn; OdbcDataReader myReader = comm.ExecuteReader(CommandBehavior.CloseConnection); while(myReader.Read()) { Console.WriteLine(myReader[0]); } } }

  Read the article

• how to enable iis 7 dynamic content compression?

  - by davidcl

  I've turned on dynamic content compression in IIS 7, but Fiddler is showing that my dynamic pages are still being served without content-encoding: gzip. Static content compression is working fine on the same servers. Not sure if it matters but most of the dynamic pages are coldfusion pages and we're also using the IIS URL rewriting module. This is from my applicationhost.config. <httpCompression directory="%SystemDrive%\inetpub\temp\IIS Temporary Compressed Files"> <scheme name="gzip" dll="%Windir%\system32\inetsrv\gzip.dll" /> <dynamicTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/javascript" enabled="true" /> <add mimeType="*/*" enabled="false" /> </dynamicTypes> <staticTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/javascript" enabled="true" /> <add mimeType="*/*" enabled="false" /> </staticTypes> </httpCompression> ... <urlCompression doDynamicCompression="true" /> Here's a sample request: GET / HTTP/1.1 Host: web5.example.com User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; rv:1.9.2) Gecko/20100115 Firefox/3.6 (.NET CLR 3.5.30729) Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Connection: keep-alive and response header: HTTP/1.1 200 OK Transfer-Encoding: chunked Content-Type: text/html; charset=UTF-8 Server: Microsoft-IIS/7.0 ... Date: Mon, 22 Feb 2010 20:59:36 GMT

  Read the article

• How to securely enable file sharing over PPTP on Windows 2008 Server

  - by Damage

  I have set up a Windows SBS 2003 domain (LAN) and a stand-alone Windows 2008 Server (web server) at another location (workgroup). I established PPTP VPN connection (SBS dials web server) over which users from LAN should be able to access web server. On web server I enabled TCP/IPv4 and File and Printer sharing protocol. It has a few external addresses (one of them is default) AND one local address (192.x.x.x) assigned to network adapter. Firewall allows port 445 for file sharing. There's the problem - I can not enable web server file shares to be visible to LAN users and ONLY to LAN users: From SBS I can access webserver but I cannot access webserver from LAN workstations (XP, Vista). I have had same configuration - I have just replaced old (web server) Windows 2003 server with 2008 so SBS settings are the same (static route, DNS etc.). How can I enable file sharing on web server for LAN workstations? Now I have opened File and printer sharing to the internet which is of course totaly unsecure. I tried to secure the tunnel so I moved RAS (VPN) connection (Network Center) on web server to "Private" profile and moved firewall port 445 to "Private" profile but suddenly file sharing does not work and I cannot telnet webserver on port 445. How can I secure file sharing so I do not have to open it to the internet?

  Read the article

• TeamCity EC2 Integration via ISA Server

  - by Tim Long

  I have a TeamCity server which is actually installed on SBS 2003 Premium with ISA Server (firewall/proxy) installed. My ADSL connection has multiple IP addresses, which all resolve directly to my SBS external NIC. The NIC is therefore multi-homed and I have allocated one of the IP addresses specifically to TeamCity. In ISA, I've created an access rule to allow the traffic in. I can access my TeamCity server externally and view the web interface, that all works fine. I want to use the Amazon EC2 integration in TeamCity to launch build agents 'in the cloud'. The problem I am having is that when the agent starts, it sees the server and registers, then just sits there waiting. On the server side, the agent appears as 'disconnected'. Examining the settings, the agent's IP address appears to be that of the external NIC. What I think might be happening is that the traffic is undergoing Network Address Translation (NAT) so that TeamCity always thinks the agent is locally installed and therefore can't communicate with the actual remote agent. This seems to happen even though I have a permanent static IP address dedicated to TeamCity. So, the question is this. How can I make traffic to a specific IP address pass through the ISA server un-NATted?

  Read the article

• How to configure Apache and Tomcat with vhosts?

  - by Umar Farooq Khawaja

  I have a server with a static, public IP address. I also have a registered domain name. For the sake of illustration, let's suppose they are IP Address: 12.34.56.78 Domain Name: example.com I have a single machine on which I am running the following: A website (over IIS7) available locally at localhost:80 A JetBrains TeamCity instance (over Tomcat) available locally at localhost:1234 A VisualSVN Server instance (over Apache) available locally at localhost:5678/svn I have set up an A record for example.com and the following CNAME records: www.example.com builds.example.com sources.example.com I would like to configure Tomcat and Apache such that: if I point my browser at builds.example.com, I end up at the JetBrains TeamCity instance and, if I point my browser at sources.example.com, I end up at the VisualSVN Server instance. I thought I could configure the Apache to vhost example.com:5678/svn to point to sources.example.com and added the following lines to the Apache httpd.conf file Listen 5678 NameVirtualHost *:5678 <VistualHost *:5678> ServerName sources.example.com DocumentRoot /svn </virtualHost> That broke the VisualSVN instance, so I had to revert that to Listen 5678 Help!

  Read the article

• Nginx dynamic upstream configuration / routing

  - by Dan Sosedoff

  I was experimenting with dynamic upstream configuration for nginx and cant find any good solution to implement upstream configuration from third-party source like redis or mysql. The idea behind it is to have a single file configuration in primary server and proxy requests to various app servers based on environment conditions. Think of dynamic deployments where you have X servers that are running Y workers on different ports. For instance, i create a new app and deploy. App manager selects a server and then rolls out a worker (Ruby/PHP/Python) and then reports the ip:port to the central database with status "up". At this time when i go to the given url nginx should proxy all requests to the specified ip:port upstream. The whole thing is pretty similar to what heroku does, except this proof-of-concept is not supposed to be production ready, mostly for internal needs. The easiest solution i found was using resolver with ruby-based DNS server. It works, nginx gets the IP address correctly, but the only problem is that you cant define port number for that IP. Second solution (which i havent tried yet) is to roll something else as a proxy server, maybe written in Erlang. In this case we need to use something to serve static content. Any ideas how to implement this in more flexible and stable way? P.S. Some research options: http://openresty.org/#DynamicRoutingBasedOnRedis https://github.com/nodejitsu/node-http-proxy

  Read the article

• Self-hosting vs. Budget hosting - What are the economics?

  - by cdonner

  My current hosting provider (shared Linux, unlimited domains, < $10 per month, with about 20 sites) has been giving me a lot of grief lately. I am contemplating to just ditch them and repurpose the old Sun V20z that is sitting in my basement rack, and move the hosting in-house, literally. My math goes as follows: my company pays up to $80 a months for my home internet service, which would cover the upgrade from currently Fios to Comcast business internet with 5 static IPs. So this comes free. running the server will cost me about $180/year at the current rate of approx. $.2/kWh my time is free So, it seems that the my net cost of doing this would be about $80 anually, plus the work that goes into setup and maintenance. I will have to get email hosting somewhere, which I do not want to do myself. On the other side of the balance sheet, I'd likely get better uptime than my provider based on recent stats, will not get suspended and don't have to spend hours with customer support. Overall, I am not convinced. Has anybody actually done that? What was your experience, and did it pay off?

  Read the article

• How to scope access to a service to set of users, using OpenLDAP, and only OUs

  - by JDS

  Okay, here goes. Solving this will solve several problems for me (as I can reapply this knowledge to several extant, similar problems), but luckily I have a very specific, concise problem to describe. Enough preamble. Our hosting partner is setting up VPN access for us and is connecting it to our LDAP server. They are using Cisco VPN, the docs on setting this up are here: http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808c3c45.shtml#maintask1 Specifically, note the screenshot in (5), under "ASDM" Now, I do NOT want to provide access to all of our users. I only want to provide access to our IT group. But I do not see a configuration option for LDAP groups on that web reference for the Cisco VPN. We are using: OpenLDAP 2.4 Static groups (i.e. "Group has the following members...") Single user OU, "ou=users,dc=mycompany,dc=com" Is it possible to provide an alias of some kind in OpenLDAP that creates another OU, "itusers", say, and lets me alias the members of that OU somehow? Something like: "cn=Jeff Silverman,ou=itusers,dc=mycompany,dc=com" is an alias for "cn=Jeff Silverman,ou=users,dc=mycompany,dc=com" And is NOT a separate, unique user account. Alternatively, should I just create a separate OU and manage it separately? It is a pain, but only 12-15 users will have to be managed that way, with two separate user accounts. But I hate this option - messy, unmanageable, unscalable. You know what I mean. I am open to any options. I've searched and read all over but I can't quite find an directly analagous example. I can't possibly be the only one who's had this problem! Thanks!

  Read the article

• Sonicwall routing between multiple subnets on multiple interfaces

  - by Rain

  As shown by the network diagram below, I have two completely separate networks. One is being managed by a Sonicwall NSA 220, the other by some other router (the brand is not important). My goal is to allow devices within the 192.168.2.0/24 network to access devices in the 192.168.3.0/24 network. Allowing the reverse (192.168.3.0/24 - 192.168.2.0/24) is not required. So far, I have done the following: I connected the X3 Interface on the Sonicwall to the 192.168.3.0/24 network switch (shown as the dashed red line in the diagram). Next, I gave it a static ip address of 192.168.3.254 and set the Zone to LAN (the same Zone for the X0 interface). Judging by various articles and KBs I've read, this is all that should be necessary, although it does not work. I can ping 192.168.3.254 from any device in the 192.168.2.0/24 network although I cannot ping/connect to any device within the 192.168.3.0/24 network. Any help would be greatly appreciated! Network Diagram: (I asked a similar, yet more complicated, question earlier; although, I realized that I cannot solve that without first solving this (which may actually solve my original question))

  Read the article

• Address (url) forwarding with Vyatta

  - by Trikks

  Hi Got this kind of noob question i suppose. I got this very basic network setup and need help to set up some address forwarding. As seen in my illustration below all traffic enters via the eth0 interface (85.123.32.23). The external dns is setup to direct all hosts to this ip as well. Now, how on earth do I filter the incoming requests to each box? The Ip's are static! Se the network layout here: http://vyatta.org/files/u11160/setup.png I do not wish to solve this by assigning tons of ports etc. In my wishful thinking something like this would be nice :) set service nat rule 10 type destination set service nat rule 10 inbound-interface eth0 set service nat rule 10 destination address ftp.myhost.com set service nat rule 10 inside-address address 192.168.100.20 This way ALL traffic to the address ftp.myhost.com (at eth0) should be routed to the internal ip, 192.168.100.20. Right, is there anyone who could point in some direction? Maybe it's wrong to use nat? Please help me! :)

  Read the article

• Converting Lighttpd config to NginX with php-fpm

  - by Le Dude

  Having so much issue with NginX configuration since I'm new with NginX. Been using Lighttpd for quite sometime. Here are the base info. New Machine - CentOS 6.3 64 Bit - NginX 1.2.4-1.e16.ngx - Php-FPM 5.3.18-1.e16.remi Old Machine - CentOS 6.2 64Bit - Lighttpd 1.4.25-3.e16 Original Lighttpd config file: ####################################################################### ## ## /etc/lighttpd/lighttpd.conf ## ## check /etc/lighttpd/conf.d/*.conf for the configuration of modules. ## ####################################################################### ####################################################################### ## ## Some Variable definition which will make chrooting easier. ## ## if you add a variable here. Add the corresponding variable in the ## chroot example aswell. ## var.log_root = "/var/log/lighttpd" var.server_root = "/var/www" var.state_dir = "/var/run" var.home_dir = "/var/lib/lighttpd" var.conf_dir = "/etc/lighttpd" ## ## run the server chrooted. ## ## This requires root permissions during startup. ## ## If you run Chrooted set the the variables to directories relative to ## the chroot dir. ## ## example chroot configuration: ## #var.log_root = "/logs" #var.server_root = "/" #var.state_dir = "/run" #var.home_dir = "/lib/lighttpd" #var.vhosts_dir = "/vhosts" #var.conf_dir = "/etc" # #server.chroot = "/srv/www" ## ## Some additional variables to make the configuration easier ## ## ## Base directory for all virtual hosts ## ## used in: ## conf.d/evhost.conf ## conf.d/simple_vhost.conf ## vhosts.d/vhosts.template ## var.vhosts_dir = server_root + "/vhosts" ## ## Cache for mod_compress ## ## used in: ## conf.d/compress.conf ## var.cache_dir = "/var/cache/lighttpd" ## ## Base directory for sockets. ## ## used in: ## conf.d/fastcgi.conf ## conf.d/scgi.conf ## var.socket_dir = home_dir + "/sockets" ## ####################################################################### ####################################################################### ## ## Load the modules. include "modules.conf" ## ####################################################################### ####################################################################### ## ## Basic Configuration ## --------------------- ## server.port = 80 ## ## Use IPv6? ## #server.use-ipv6 = "enable" ## ## bind to a specific IP ## #server.bind = "localhost" ## ## Run as a different username/groupname. ## This requires root permissions during startup. ## server.username = "lighttpd" server.groupname = "lighttpd" ## ## enable core files. ## #server.core-files = "disable" ## ## Document root ## server.document-root = server_root + "/lighttpd" ## ## The value for the "Server:" response field. ## ## It would be nice to keep it at "lighttpd". ## #server.tag = "lighttpd" ## ## store a pid file ## server.pid-file = state_dir + "/lighttpd.pid" ## ####################################################################### ####################################################################### ## ## Logging Options ## ------------------ ## ## all logging options can be overwritten per vhost. ## ## Path to the error log file ## server.errorlog = log_root + "/error.log" ## ## If you want to log to syslog you have to unset the ## server.errorlog setting and uncomment the next line. ## #server.errorlog-use-syslog = "enable" ## ## Access log config ## include "conf.d/access_log.conf" ## ## The debug options are moved into their own file. ## see conf.d/debug.conf for various options for request debugging. ## include "conf.d/debug.conf" ## ####################################################################### ####################################################################### ## ## Tuning/Performance ## -------------------- ## ## corresponding documentation: ## http://www.lighttpd.net/documentation/performance.html ## ## set the event-handler (read the performance section in the manual) ## ## possible options on linux are: ## ## select ## poll ## linux-sysepoll ## ## linux-sysepoll is recommended on kernel 2.6. ## server.event-handler = "linux-sysepoll" ## ## The basic network interface for all platforms at the syscalls read() ## and write(). Every modern OS provides its own syscall to help network ## servers transfer files as fast as possible ## ## linux-sendfile - is recommended for small files. ## writev - is recommended for sending many large files ## server.network-backend = "linux-sendfile" ## ## As lighttpd is a single-threaded server, its main resource limit is ## the number of file descriptors, which is set to 1024 by default (on ## most systems). ## ## If you are running a high-traffic site you might want to increase this ## limit by setting server.max-fds. ## ## Changing this setting requires root permissions on startup. see ## server.username/server.groupname. ## ## By default lighttpd would not change the operation system default. ## But setting it to 2048 is a better default for busy servers. ## ## With SELinux enabled, this is denied by default and needs to be allowed ## by running the following once : setsebool -P httpd_setrlimit on server.max-fds = 2048 ## ## Stat() call caching. ## ## lighttpd can utilize FAM/Gamin to cache stat call. ## ## possible values are: ## disable, simple or fam. ## server.stat-cache-engine = "simple" ## ## Fine tuning for the request handling ## ## max-connections == max-fds/2 (maybe /3) ## means the other file handles are used for fastcgi/files ## server.max-connections = 1024 ## ## How many seconds to keep a keep-alive connection open, ## until we consider it idle. ## ## Default: 5 ## #server.max-keep-alive-idle = 5 ## ## How many keep-alive requests until closing the connection. ## ## Default: 16 ## #server.max-keep-alive-requests = 18 ## ## Maximum size of a request in kilobytes. ## By default it is unlimited (0). ## ## Uploads to your server cant be larger than this value. ## #server.max-request-size = 0 ## ## Time to read from a socket before we consider it idle. ## ## Default: 60 ## #server.max-read-idle = 60 ## ## Time to write to a socket before we consider it idle. ## ## Default: 360 ## #server.max-write-idle = 360 ## ## Traffic Shaping ## ----------------- ## ## see /usr/share/doc/lighttpd/traffic-shaping.txt ## ## Values are in kilobyte per second. ## ## Keep in mind that a limit below 32kB/s might actually limit the ## traffic to 32kB/s. This is caused by the size of the TCP send ## buffer. ## ## per server: ## #server.kbytes-per-second = 128 ## ## per connection: ## #connection.kbytes-per-second = 32 ## ####################################################################### ####################################################################### ## ## Filename/File handling ## ------------------------ ## ## files to check for if .../ is requested ## index-file.names = ( "index.php", "index.rb", "index.html", ## "index.htm", "default.htm" ) ## index-file.names += ( "index.xhtml", "index.html", "index.htm", "default.htm", "index.php" ) ## ## deny access the file-extensions ## ## ~ is for backupfiles from vi, emacs, joe, ... ## .inc is often used for code includes which should in general not be part ## of the document-root url.access-deny = ( "~", ".inc" ) ## ## disable range requests for pdf files ## workaround for a bug in the Acrobat Reader plugin. ## $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } ## ## url handling modules (rewrite, redirect) ## #url.rewrite = ( "^/$" => "/server-status" ) #url.redirect = ( "^/wishlist/(.+)" => "http://www.example.com/$1" ) ## ## both rewrite/redirect support back reference to regex conditional using %n ## #$HTTP["host"] =~ "^www\.(.*)" { # url.redirect = ( "^/(.*)" => "http://%1/$1" ) #} ## ## which extensions should not be handle via static-file transfer ## ## .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi ## static-file.exclude-extensions = ( ".php", ".pl", ".fcgi", ".scgi" ) ## ## error-handler for status 404 ## #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## ## Format: <errorfile-prefix><status-code>.html ## -> ..../status-404.html for 'File not found' ## #server.errorfile-prefix = "/srv/www/htdocs/errors/status-" ## ## mimetype mapping ## include "conf.d/mime.conf" ## ## directory listing configuration ## include "conf.d/dirlisting.conf" ## ## Should lighttpd follow symlinks? ## server.follow-symlink = "enable" ## ## force all filenames to be lowercase? ## #server.force-lowercase-filenames = "disable" ## ## defaults to /var/tmp as we assume it is a local harddisk ## server.upload-dirs = ( "/var/tmp" ) ## ####################################################################### ####################################################################### ## ## SSL Support ## ------------- ## ## To enable SSL for the whole server you have to provide a valid ## certificate and have to enable the SSL engine.:: ## ## ssl.engine = "enable" ## ssl.pemfile = "/path/to/server.pem" ## ## The HTTPS protocol does not allow you to use name-based virtual ## hosting with SSL. If you want to run multiple SSL servers with ## one lighttpd instance you must use IP-based virtual hosting: :: ## ## $SERVER["socket"] == "10.0.0.1:443" { ## ssl.engine = "enable" ## ssl.pemfile = "/etc/ssl/private/www.example.com.pem" ## server.name = "www.example.com" ## ## server.document-root = "/srv/www/vhosts/example.com/www/" ## } ## ## If you have a .crt and a .key file, cat them together into a ## single PEM file: ## $ cat /etc/ssl/private/lighttpd.key /etc/ssl/certs/lighttpd.crt \ ## > /etc/ssl/private/lighttpd.pem ## #ssl.pemfile = "/etc/ssl/private/lighttpd.pem" ## ## optionally pass the CA certificate here. ## ## #ssl.ca-file = "" ## ####################################################################### ####################################################################### ## ## custom includes like vhosts. ## #include "conf.d/config.conf" #include_shell "cat /etc/lighttpd/vhosts.d/*.conf" ## ####################################################################### ####################################################################### ### Custom Added by me #url.rewrite-once = (".*\.(js|ico|gif|jpg|png|css|jar|class)$" => "$0", "" => "/index.php") url.rewrite-once = ( ".*\?(.*)$" => "/index.php?$1", "^/js/.*$" => "$0", "^.*\.(js|ico|gif|jpg|png|css|swf |jar|class)$" => "$0", "" => "/index.php" ) # expire.url = ( "" => "access 1 days" ) include "myvhost-vhosts.conf" ####################################################################### Here is my Vhost file for lighttpd $HTTP["host"] =~ "192.168.8.35$" { server.document-root = "/var/www/lighttpd/qc41022012/public" server.errorlog = "/var/log/lighttpd/error.log" accesslog.filename = "/var/log/lighttpd/access.log" server.error-handler-404 = "/e404.php" } and here is my nginx.conf file user nginx; worker_processes 5; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/testsite/logs/access.log main; sendfile on; #tcp_nopush on; keepalive_timeout 65; #gzip on; # include /etc/nginx/conf.d/*.conf; ## I added this ## include /etc/nginx/sites-available/*; } Here is my NginX Vhost file server { server_name 192.168.8.91; access_log /var/log/nginx/myapps/logs/access.log; error_log /var/log/nginx/myapps/logs/error.log; root /var/www/html/myapps/public; location / { index index.html index.htm index.php; } location = /favicon.ico { return 204; access_log off; log_not_found off; } # location ~ \.php$ { # try_files $uri /index.php; # include /etc/nginx/fastcgi_params; # fastcgi_pass 127.0.0.1:9000; # fastcgi_index index.php; # fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; # fastcgi_param SCRIPT_NAME $fastcgi_script_name; location ~ \.php.*$ { rewrite ^(.*.php)/ $1 last; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; # fastcgi_intercept_errors on; # fastcgi_param SCRIPT_FILENAME $document_root/index.php; # fastcgi_param PATH_INFO $uri; # fastcgi_pass 127.0.0.1:9000; # include fastcgi_params; } } We have a custom apps that we created that works great with lighttpd. I went through some headache also when we were trying to figure out how to make it work with lighttpd. this is the line that helps make it work in lighttpd. url.rewrite-once = ( ".*\?(.*)$" => "/index.php?$1", "^/js/.*$" => "$0", "^.*\.(js|ico|gif|jpg|png|css|swf |jar|class)$" => "$0", "" => "/index.php" ) but I couldn't figure out how to make it works in NginX. The webserver run just fine when we use the phpinfo.php test file. However as soon as I point it to my apps, nothing comes up. Check the error.log file and there's no error. Very mind boggling. I spent over 1 week trying to figure it out with no luck.. Please help?

  Read the article

• Address (url) forwarding with Vyatta

  - by Trikks

  Got this kind of noob question i suppose. I got this very basic network setup and need help to set up some address forwarding. As seen in my illustration below all traffic enters via the eth0 interface (85.123.32.23). The external dns is setup to direct all hosts to this ip as well. Now, how on earth do I filter the incoming requests to each box? The Ip's are static! My network layout: I do not wish to solve this by assigning tons of ports etc. In my wishful thinking something like this would be nice :) set service nat rule 10 type destination set service nat rule 10 inbound-interface eth0 set service nat rule 10 destination address ftp.myhost.com set service nat rule 10 inside-address address 192.168.100.20 This way ALL traffic to the address ftp.myhost.com (at eth0) should be routed to the internal ip, 192.168.100.20. Right, is there anyone who could point in some direction? Maybe it's wrong to use nat? Please help me! :)

  Read the article

• OpenVPN via DD-WRT

  - by user140491

  I am using DD-WRT with my Buffalo G300NH. I notice in my log files: Wed Oct 10 01:08:25 2012 us=343000 Cannot open /tmp/openvpn/dh.pem for DH parameters: error:02001003:system library:fopen:No such process: error:2006D080:BIO routines:BIO_new_file:no such file I have looked at other answers regarding this error. I have tried to no avail. 755 are chmod rights to /tmp/openvpn. At this point, I can not connect outside my LAN via OpenVPN. My server config looks like this: #mode server #tls-server push "route 192.168.11.1 255.255.255.0" push "dhcp-option DNS 10.8.0.1" server 10.8.0.0 255.255.255.0 port 1194 proto udp dev tun0 ifconfig 10.8.0.1 10.8.0.2 #secret /tmp/static.key ca /tmp/openvpn/ca.crt cert /tmp/openvpn/cert.pem key /tmp/openvpn/key.pem dh /tmp/openvpn/dh.pem keepalive 10 120 comp-lzo persist-key persist-tun verb 5 management localhost 5001 Can someone, knowledgeable, of this error kindly help? i have been going on several days, trying to sort it out. I like all nighters though!!

  Read the article

• Windows Server 2008 DHCP with RRAS

  - by Guillermo Prandi

  I have a Windows Server 2008 R2 which is a member of a domain, but is placed in a remote location. The server is directly connected to Internet. Clients need to access a particular insecure TCP service in this server (ports 9730 and 9731). Since clients have dynamic IP addresses I cannot know in advance, I thought it would be nice to have them connected through a VPN in order to access the insecure service, but ONLY to access that service, like this: Client ------> VPN TUNNEL ------> (Insecure service at Server) | \----> (Normal internet access) I'd enable the insecure ports in the firewall only from VPN accesses. For this I configured RRAS in the server and gave it a static IP address range (172.19.1.2 through 172.19.1.254) to serve the clients. First I thought I could use DHCP to assign the addresses, but I cannot use DHCP in my LAN connection (not allowed by the hosting service). I tried configuring DHCP binding it to a Microsoft Loopback Adapter, but that's not supported as a DHCP source by RRAS. What I want to accomplish is to send specific DHCP options to the client (network mask, routing table, etc.). In particular: Prevent the client from having the server as default router (without changing the client's "use default gateway in remote network"). Have it as a route for the server's internal RRAS address only (172.19.1.1). Prevent the client from using a 255.255.0.0 mask for the 172.19.x.x network (a 255.255.255.0 mask would be better). Can I do that with RRAS only? How? Currently, the only solution I can think of is to use DHCP in the LAN adapter, but filter DHCP packets so they don't reach the provider's network. However, I'm not sure if that will work. Any suggestions are welcomed! Guille

  Read the article

• Configure IPv6 routing

  - by godlark

  I've got IPv6 addresses from SIXXS. My host is connected with SIXXS network over a AICCU tunnel ("sixxs" interface). My host address is 2001:::2, the host on the end has address 2001:::1. On my host IPv6 is fully accessible. I have problem with configuring IPv6 network on VMs. I use VirtualBox, the VM (Ubuntu) uses tap1 (on the host bridged by br0) #!/bin/sh PATH=/sbin:/usr/bin:/bin:/usr/bin:/usr/sbin # create a tap tunctl -t tap1 ip link set up dev tap1 # create the bridge brctl addbr br0 brctl addif br0 tap1 # set the IP address and routing ip link set up dev br0 ip -6 route del 2001:6a0:200:172::/64 dev sixxs ip -6 route add 2001:6a0:200:172::1 dev sixxs ip -6 addr add 2001:6a0:200:172::2/64 dev br0 ip -6 route add 2001:6a0:200:172::2/64 dev br0 Host: routing table: 2001:6a0:200:172::1 dev sixxs metric 1024 2001:6a0:200:172::/64 dev br0 proto kernel metric 256 2001:6a0:200:172::/64 dev br0 metric 1024 2000::/3 dev sixxs metric 1024 fe80::/64 dev eth0 proto kernel metric 256 fe80::/64 dev sixxs proto kernel metric 256 fe80::/64 dev br0 proto kernel metric 256 fe80::/64 dev tap1 proto kernel metric 256 default via 2001:6a0:200:172::1 dev sixxs metric 1024 Guest: interface eth1 (it is connected with tap1): auto eth1 iface eth1 inet6 static address 2001:6a0:200:172::3 netmask 64 gateway 2001:6a0:200:172::2 Guest: routing table 2001:6a0:200:172::/64 dev eth1 proto kernel metric 256 fe80::/64 dev eth0 proto kernel metric 256 fe80::/64 dev eth1 proto kernel metric 256 default via 2001:6a0:200:172::2 dev eth1 metric 1024 The guest pings to the host, the host pings to the guest, the host pings to 2001:6a0:200:172::1, but the guest doesn't ping to 2001:6a0:200:172::1. The guest tries to ping, on the host (by tcdump) I can capture its packets, but the host doesn't send them to 2001:6a0:200:172::1. What have I missed in configuration?

  Read the article

• Vista ICS issue

  - by Bill Grey

  I have a strange problem with Internet Connection Sharing on a laptop running Vista Business. This laptop is connected to the internet via the ethernet port, which goes to an ADSL modem. it is automatically assigned the IP address 192.168.1.50, and the modem/gateway is 192.168.1.1 My friends laptop is running Vista Home. Previously, I would create an ad hoc wireless network, enable ICS, and everything would be perfect. My friend would have internet access via this. However, something has now mysteriously broken. If I enable ICS on the wireless connection, it resets my Local Area Connection, assigning it the manual IP address of 192.168.0.1, which means my connection to the internet is destroyed. Both wireless adapters on each network are assigned auto configuration addresses, in the 168. range. They can see each other fine, but my friends laptop cannot access the internet via mine, even after I have restored the Local Area Connection settings. I understand the computer with ICS enabled must have the IP of 192.168.0.1, but previously, before whatever went wrong, my wireless adapter would be 192.168.0.1 and my friends computer would get an IP via DHCP. I have also tried setting static IP address and making a bridge, none of which works. How can I fix this problem, and prevent enabling ICS from touching my Local Area Connection? Both machines have no firewall, have appropriate settings etc...

  Read the article

• Force Windows Local Subnet Traffic through a Gateway

  - by Beerey

  Hi all, We are attempting to route all traffic from a certain machine to a gateway. This works ok for traffic destined for subnets outside of the machine's subnet. However, traffic to machines in the same subnet as the source machine goes through an On-Link gateway in Windows. This means that the default gateway is ignored, and traffic in a subnet (for example, 192.168.50.10 - 192.168.50.11) flows. Destination Netmask Gateway Interface Metric 192.168.50.0 255.255.255.0 On-link 192.168.50.214 276 This route can be deleted from Windows, but when the machine is rebooted it always comes back. Adding a persistant static route to the gateway with a lower metric doesn't work, since it will still try the On-Link gateway after the persistant route fails. Adding each machine in a VLAN isn't an option due to the setup we have Adding a startup script to delete the gateway isn't a great option either, since users will have full admin access to the machine and might disable the script. We cannot transperantly intercept all network traffic on the subnet using Gratuitous ARPs or transparent proxying, since there are other machines on the subnet which use a different gateway The only way we have gotten it to work is by adding a persistant route to the gateway for the subnet traffic, and deleting the On-link route on reboot. The question is then. Is there a way to permanently remove this On-link route If not, is there a way to otherwise force even local subnet traffic to go through a gateway?

  Read the article

• Distributed development staff needing a common IP range

  - by bakasan

  I work on a development staff that is geographically distributed, mostly all throughout the state of CA, but several key members also must travel frequently. We rely quite heavily on a 3rd party provider API for a great deal of our subsystems (can't get into who it is or what they do). The 3rd party however is quite stringent on network access and have no notion of a development sandbox. Access is restricted to 2, 3 IP numbers and that's about it. Once we account for our production servers, that leaves us with an IP or two to spare for our dev team--which is still problematic as people's home IP changes, people travel, we have more than 2 devs, etc. Wide IP blocks are not permitted by the 3rd party. Nor will they allow dynamic DNS type services. There is no simple console to swap IPs on the fly either (e.g. if a dev's IP at home changes or they are on the road). As none of us are deep network experts, I'm wondering what our viable options are? Are there such things as 3rd party hosts to VPNs? Generally I think of a VPN as a mechanism to gain access to a home office, but the notion would be a 3rd party VPN that we'd all connect to and we'd register this as an IP origin w/ our 3rd party. We've considered using Amazon EC2 to effectively host a dev environment for each dev and using that to connect. Amazon only gives you so many static IPs however (I believe 5?) so this would only be a stop gap solution until our team size out strips our IP count at Amazon. Those were the only viable thoughts that I had, but again, I'm far from a networking guy. Tried searching for similar threads, but I'm not even sure I know the right vernacular to look around for.

  Read the article

< Previous Page | 498 499 500 501 502 503 504 505 506 507 508 509  | Next Page >