Search Results

Search found 16948 results on 678 pages for 'static analysis'.

Page 500/678 | < Previous Page | 496 497 498 499 500 501 502 503 504 505 506 507  | Next Page >

• Duplicate ping response when running Ubuntu as virtual machine (VMWare)

  - by Stonerain

  I have the following setup: My router - 192.168.0.1 My host computer (Windows 7) - 192.168.0.3 And Ubuntu is running as virtual machine on the host. VMWare network settings is Bridged mode. I've modified Ubuntu network settings in /etc/netowrk/interfaces, set the following config: iface eth0 inet static address 192.168.0.220 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 Internet works correctly, I can install packages. But it gets weird if I try to ping something I get this: PING belpak.by (193.232.248.80) 56(84) bytes of data. From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded From 192.168.0.1 icmp_seq=1 Time to live exceeded 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=250 time=17.0 ms 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=249 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=248 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=247 time=17.0 ms (DUP! ) 64 bytes from belhost.by (193.232.248.80): icmp_seq=1 ttl=246 time=17.0 ms (DUP! ) ^CFrom 192.168.0.1 icmp_seq=2 Time to live exceeded --- belpak.by ping statistics --- 2 packets transmitted, 1 received, +4 duplicates, +6 errors, 50% packet loss, ti me 999ms rtt min/avg/max/mdev = 17.023/17.041/17.048/0.117 ms I think even more interesting are the results of pinging the router itself: stonerain@ubuntu:~$ ping 192.168.0.1 -c 1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. From 192.168.0.3: icmp_seq=1 Redirect Network(New nexthop: 192.168.0.1) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=254 time=6.64 ms --- 192.168.0.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 6.644/6.644/6.644/0.000 ms But if I set -c 2: ... 64 bytes from 192.168.0.1: icmp_seq=1 ttl=252 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=251 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=254 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=253 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=252 time=13.5 ms (DUP!) 64 bytes from 192.168.0.1: icmp_seq=1 ttl=251 time=13.5 ms (DUP!) From 192.168.0.3: icmp_seq=2 Redirect Network(New nexthop: 192.168.0.1) 64 bytes from 192.168.0.1: icmp_seq=2 ttl=254 time=7.87 ms --- 192.168.0.1 ping statistics --- 2 packets transmitted, 2 received, +256 duplicates, 0% packet loss, time 1002ms rtt min/avg/max/mdev = 6.666/10.141/13.556/2.410 ms Pinging host machine on the other hand works absolutely correctly: no DUPs, no errors. What seems to be the problem and how can I fix it? Thank you.

  Read the article

• What is the best way to implement collision detection using Bullet physics engine and a track generated from a curve?

  - by tigrou

  I am developing a small racing game were the track is generated from a curve. As said above, the track is generated, but not infinite. The track of one level could fit with no problem in memory and will contain a reasonably small amount of triangles. For collisions, I would like to use Bullet physics engine and know what is the best way to handle collisions with the track efficiently. NOTE : The track will be stored as a static rigid body (mass = 0). The player will be represented by a sphere shape for collisions. Here is some possibilities i have in mind : Create one rigid body, then, put all triangles of the track (except non collidable stuff) into it. Result : 1 body with many triangles (eg : 30000 triangles) Split the track into several sections (eg: 10 sections). Then, for each section, create a rigid body and put corresponding triangles in it. Result : small amount of bodies with relatively small amount of triangles (eg : 1500 triangles per section). Split the track into many sub-sections (eg : 1200 sections). Here one subsection = very small step when generating the curve. Again for each sub-section, create a body and put triangles in it. Result : many bodies with very small amount of triangles (eg : 20 triangles). Advantage : it could be possible to "extra data" to each of the subsection, that could be used when handling collisions. Same as 2, but only put sections N and N+1 in physics engine (where N = current section where the player is). When player reach section N+1, unload section N and load section N+2 and so on... Issue : harder to implement, problems if the player suddenly "jump" from one section to another (eg : player fly away from section N, and fall on section N + 4 that was underneath : no collision handled, player will fall into void ) Same as 4, but with many sub-sections. Issues : since subsections are very small there will be constantly new bodies added and removed to physics engine at runtime. Possibilities for player to accidently skip some sections and fall into the void are higher than 4.

  Read the article

• Dynamic Bind9 + DHCP

  - by AcidRod75

  i have been working on setup a server for my internal network, so far i have a working isc-dhcp-server that can upgrade a chrooted BIND9 (on the same machine), i need to add some static entries on the DNS, so users can resolve the websites that resides in our DMZ. What i had tryed all ready was to modify the /etc/bind/named.conf.local with this info: // // Do any local configuration here // // Consider adding the 1918 zones here, if they are not used in your // organization //include "/etc/bind/zones.rfc1918"; key DHCP_UPDATER { algorithm HMAC-MD5.SIG-ALG.REG.INT; secret "MySuperSecretHash"; (this is not the real value BTW) }; zone "quality.internal" IN { type master; file "/var/lib/bind/quality.internal.db"; allow-update { key DHCP_UPDATER; }; }; zone "0.10.10.in-addr.arpa" { type master; file "/var/lib/bind/rev.10.10.0.in-addr.arpa"; allow-update { key DHCP_UPDATER; }; }; logging { channel query.log { file "/var/log/named/query.log"; severity debug 3; }; category queries { query.log; }; }; --- EOF ---- then i added this 2 entries: zone "ourserver.internal" IN { type master; file "/var/lib/bind/ourserver.internal.db"; }; zone "0.16.172.in-addr.arpa" { type master; file "/var/lib/bind/rev.172.16.0.in-addr.arpa"; }; ---- EOF ---- So.. i created the files ourserver.internal.db and rev.172.16.0.in-addr.arpa placed them BOTH in /var/lib/bind/ and changed the permisions so the bind user can access them, restated the service... when i do a NSLOOKUP www.ourserver.internal i get: Server: 127.0.0.1 Address: 127.0.0.1#53 ** server can't find www.ourserver.internal: NXDOMAIN BUT when i do a reverse lookup.... Server: 127.0.0.1 Address: 127.0.0.1#53 5.0.16.172.in-addr.arpa name = www.ourserver.internal I do not understand what's wrong. Some help with this will save me from installing a new DNS server at the DMZ JUST to host internal site names- TY in advance BTW: the server i'm using has Ubuntu Server 11.10 fully patched.

  Read the article

• Write and fprintf for file I/O

  - by Darryl Gove

  fprintf() does buffered I/O, where as write() does unbuffered I/O. So once the write() completes, the data is in the file, whereas, for fprintf() it may take a while for the file to get updated to reflect the output. This results in a significant performance difference - the write works at disk speed. The following is a program to test this: #include <fcntl.h #include <unistd.h #include <stdio.h #include <stdlib.h #include <errno.h #include <stdio.h #include <sys/time.h #include <sys/types.h #include <sys/stat.h static double s_time; void starttime() { s_time=1.0*gethrtime(); } void endtime(long its) { double e_time=1.0*gethrtime(); printf("Time per iteration %5.2f MB/s\n", (1.0*its)/(e_time-s_time*1.0)*1000); s_time=1.0*gethrtime(); } #define SIZE 10*1024*1024 void test_write() { starttime(); int file = open("./test.dat",O_WRONLY|O_CREAT,S_IWGRP|S_IWOTH|S_IWUSR); for (int i=0; i<SIZE; i++) { write(file,"a",1); } close(file); endtime(SIZE); } void test_fprintf() { starttime(); FILE* file = fopen("./test.dat","w"); for (int i=0; i<SIZE; i++) { fprintf(file,"a"); } fclose(file); endtime(SIZE); } void test_flush() { starttime(); FILE* file = fopen("./test.dat","w"); for (int i=0; i<SIZE; i++) { fprintf(file,"a"); fflush(file); } fclose(file); endtime(SIZE); } int main() { test_write(); test_fprintf(); test_flush(); } Compiling and running I get 0.2MB/s for write() and 6MB/s for fprintf(). A large difference. There's three tests in this example, the third test uses fprintf() and fflush(). This is equivalent to write() both in performance and in functionality. Which leads to the suggestion that fprintf() (and other buffering I/O functions) are the fastest way of writing to files, and that fflush() should be used to enforce synchronisation of the file contents.

  Read the article

• C Minishell Command Expansion Printing Gibberish

  - by Optimus_Pwn

  I'm writing a unix minishell in C, and am at the point where I'm adding command expansion. What I mean by this is that I can nest commands in other commands, for example: $> echo hello $(echo world! ... $(echo and stuff)) hello world! ... and stuff I think I have it working mostly, however it isn't marking the end of the expanded string correctly, for example if I do: $> echo a $(echo b $(echo c)) a b c $> echo d $(echo e) d e c See it prints the c, even though I didn't ask it to. Here is my code: msh.c - http://pastebin.com/sd6DZYwB expand.c - http://pastebin.com/uLqvFGPw I have a more code, but there's a lot of it, and these are the parts that I'm having trouble with at the moment. I'll try to tell you the basic way I'm doing this. Main is in msh.c, here it gets a line of input from either the commandline or a shellfile, and then calls processline (char *line, int outFD, int waitFlag), where line is the line we just got, outFD is the file descriptor of the output file, and waitFlag tells us whether or not we should wait if we fork. When we call this from main we do it like this: processline (buffer, 1, 1); In processline, we allocate a new line: char expanded_line[EXPANDEDLEN]; We then call expand, in expand.c: expand(line, expanded_line, EXPANDEDLEN); In expand, we copy the characters literally from line to expanded_line until we find a $(, which then calls: static int expCmdOutput(char *orig, char *new, int *oldl_ind, int *newl_ind) orig is line, and new is expanded line. oldl_ind and newl_ind are the current positions in the line and expanded line, respectively. Then we pipe, and recursively call processline, passing it the nested command(for example, if we had "echo a $(echo b)", we would pass processline "echo b"). This is where I get confused, each time expand is called, is it allocating a new chunk of memory EXPANDEDLEN long? If so, this is bad because I'll run out of stack room really quickly(in the case of a hugely nested commandline input). In expand I insert a null character at the end of the expanded string, so why is it printing past it? If you guys need any more code, or explanations, just ask. Secondly, I put the code in pastebin because there's a ton of it, and in my experience people don't like it when I fill up several pages with code. Thanks.

  Read the article

• Ray Picking Problems

  - by A Name I Haven't Decided On

  I've read so many answers on here about how to do Ray Picking, that I thought I had the idea of it down. But when I try to implement it in my game, I get garbage. I'm working with LWJGL. Here's the code: public static Ray getPick(int mouseX, int mouseY){ glPushMatrix(); //Setting up the Mouse Clip Vector4f mouseClip = new Vector4f((float)mouseX * 2 / 960f - 1, 1 - (float)mouseY * 2 / 640f ,0 ,1); //Loading Matrices FloatBuffer modMatrix = BufferUtils.createFloatBuffer(16); FloatBuffer projMatrix = BufferUtils.createFloatBuffer(16); glGetFloat(GL_MODELVIEW_MATRIX, modMatrix); glGetFloat(GL_PROJECTION_MATRIX, projMatrix); //Assigning Matrices Matrix4f proj = new Matrix4f(); Matrix4f model = new Matrix4f(); model.load(modMatrix); proj.load(projMatrix); //Multiplying the Projection Matrix by the Model View Matrix Matrix4f tempView = new Matrix4f(); Matrix4f.mul(proj, model, tempView); tempView.invert(); //Getting the Camera Position in World Space. The 4th Column of the Model View Matrix. model.invert(); Point cameraPos = new Point(model.m30, model.m31, model.m32); //Theoretically getting the vector the Picking Ray goes Vector4f rayVector = new Vector4f(); Matrix4f.transform(tempView, mouseClip, rayVector); rayVector.translate((float)-cameraPos.getX(),(float) -cameraPos.getY(),(float) -cameraPos.getZ(), 0f); rayVector.normalise(); glPopMatrix(); //This Basically Spits out a value that changes as the Camera moves. //When the Mouse moves, the values change around 0.001 points from screen edge to edge. System.out.format("Vector: %f %f %f%n", rayVector.x, rayVector.y, rayVector.z); //return new Ray(cameraPos, rayVector); return null; } I don't really know why this isn't working. I was hoping some more experienced eyes might be able to help me out. I can get the camera position like a champ, it's the vector the rays going in that I can't seem to get right. Thanks.

  Read the article

• MarteEngine Tile Collision

  - by opiop65

  I need to add collision to my tile map using MarteEngine. MarteEngine is built of of slick2D. Here's my tile generation code: Code: public void render(GameContainer gc, StateBasedGame game, Graphics g) throws SlickException { for (int x = 0; x < 16; x++) { for (int y = 0; y < 16; y++) { map[x][y] = AIR; air.draw(x * GameWorld.tilesize, y * GameWorld.tilesize); } } for (int x = 0; x < 16; x++) { for (int y = 7; y < 8; y++) { map[x][y] = GRASS; grass.draw(x * tilesize, y * tilesize); } } for (int x = 0; x < 16; x++) { for (int y = 8; y < 10; y++) { map[x][y] = DIRT; dirt.draw(x * tilesize, y * tilesize); } } for (int x = 0; x < 16; x++) { for (int y = 10; y < 16; y++) { map[x][y] = STONE; stone.draw(x * tilesize, y * tilesize); } } super.render(gc, game, g); } And one of my tile classes (they're all the same, the image names are just different): Code: package MarteEngine; import org.newdawn.slick.Image; import org.newdawn.slick.SlickException; import it.randomtower.engine.entity.Entity; public class Grass extends Entity { public static Image grass = null; public Grass(float x, float y) throws SlickException { super(x, y); grass = new Image("res/grass.png"); setHitBox(0, 0, 50, 50); addType(SOLID); } } I tried to do it like this: Code: for (int x = 0; x < 16; x++) { for (int y = 7; y < 8; y++) { map[x][y] = GRASS; Grass.grass.draw(x * tilesize, y * tilesize); } } But it gave me a NullPointerException. No idea why, everything looks initialized right? I would be very grateful for some help!

  Read the article

• Box2D Difference Between WorldCenter and Position

  - by Free Lancer

  So this problem has been brothering for a couple of days now. First off, what is the difference between say Body.getWorldCenter() and Body.getPosition(). I heard that WorldCenter might have to do with the center of gravity or something. Second, When I create a Box2D Body for a sprite the Body is always at the lower left corner. I check it by printing a Rectangle of 1 pixel around the box.getWorldCenter(). From what I understand the Body should be in the center of the Sprite and its bounding box should wrap around the Sprite, correct? Here's an image of what I mean (The Sprite is Red, Body Blue): Here's some code: Body Creator: public static Body createBoxBody( final World pPhysicsWorld, final BodyType pBodyType, final FixtureDef pFixtureDef, Sprite pSprite ) { float pRotation = 0; float pCenterX = pSprite.getX() + pSprite.getWidth() / 2; float pCenterY = pSprite.getY() + pSprite.getHeight() / 2; float pWidth = pSprite.getWidth(); float pHeight = pSprite.getHeight(); final BodyDef boxBodyDef = new BodyDef(); boxBodyDef.type = pBodyType; //boxBodyDef.position.x = pCenterX / Constants.PIXEL_METER_RATIO; //boxBodyDef.position.y = pCenterY / Constants.PIXEL_METER_RATIO; boxBodyDef.position.x = pSprite.getX() / Constants.PIXEL_METER_RATIO; boxBodyDef.position.y = pSprite.getY() / Constants.PIXEL_METER_RATIO; Vector2 v = new Vector2( boxBodyDef.position.x * Constants.PIXEL_METER_RATIO, boxBodyDef.position.y * Constants.PIXEL_METER_RATIO ); Gdx.app.log("@Physics", "createBoxBody():: Box Position: " + v); // Temporary Box shape of the Body final PolygonShape boxPoly = new PolygonShape(); final float halfWidth = pWidth * 0.5f / Constants.PIXEL_METER_RATIO; final float halfHeight = pHeight * 0.5f / Constants.PIXEL_METER_RATIO; boxPoly.setAsBox( halfWidth, halfHeight ); // set the anchor point to be the center of the sprite pFixtureDef.shape = boxPoly; final Body boxBody = pPhysicsWorld.createBody(boxBodyDef); Gdx.app.log("@Physics", "createBoxBody():: Box Center: " + boxBody.getPosition().mul(Constants.PIXEL_METER_RATIO)); boxBody.createFixture(pFixtureDef); boxBody.setTransform( boxBody.getWorldCenter(), MathUtils.degreesToRadians * pRotation ); boxPoly.dispose(); return boxBody; } Making the Sprite: public Car( Texture texture, float pX, float pY, World world ) { super( "Car" ); mSprite = new Sprite( texture ); mSprite.setSize( mSprite.getWidth() / 6, mSprite.getHeight() / 6 ); mSprite.setPosition( pX, pY ); mSprite.setOrigin( mSprite.getWidth()/2, mSprite.getHeight()/2); FixtureDef carFixtureDef = new FixtureDef(); // Set the Fixture's properties, like friction, using the car's shape carFixtureDef.restitution = 1f; carFixtureDef.friction = 1f; carFixtureDef.density = 1f; // needed to rotate body using applyTorque mBody = Physics.createBoxBody( world, BodyDef.BodyType.DynamicBody, carFixtureDef, mSprite ); }

  Read the article

• Our own Daily WTF

  - by Dennis Vroegop

  Originally posted on: http://geekswithblogs.net/dvroegop/archive/2014/08/20/our-own-daily-wtf.aspxIf you're a developer, you've probably heard of the website the DailyWTF. If you haven't, head on over to http://www.thedailywtf.com and read. And laugh. I'll wait. Read it? Good. If you're a bit like me probably you've been wondering how on earth some people ever get hired as a software engineer. Most of the stories there seem to weird to be true: no developer would write software like that right? And then you run into a little nugget of code one of your co-workers wrote. And then you realize: "Hey, it happens everywhere!" Look at this piece of art I found in our codebase recently: public static decimal ToDecimal(this string input) {     System.Globalization.CultureInfo cultureInfo = System.Globalization.CultureInfo.InstalledUICulture;     var numberFormatInfo = (System.Globalization.NumberFormatInfo)cultureInfo.NumberFormat.Clone();     int dotIndex = input.IndexOf(".");     int commaIndex = input.IndexOf(",");     if (dotIndex > commaIndex)         numberFormatInfo.NumberDecimalSeparator = ".";     else if (commaIndex > dotIndex)         numberFormatInfo.NumberDecimalSeparator = ",";     decimal result;     if (decimal.TryParse(input, System.Globalization.NumberStyles.Float, numberFormatInfo, out result))         return result;     else         throw new Exception(string.Format("Invalid input for decimal parsing: {0}. Decimal separator: {1}.", input, numberFormatInfo.NumberDecimalSeparator)); }  Me and a collegue have been looking long and hard at this and what we concluded was the following: Apparently, we don't trust our users to be able to correctly set the culture in Windows. Users aren't able to determine if they should tell Windows to use a decimal point or a comma to display numbers. So what we've done here is make sure that whatever the user enters, we'll translate that into whatever the user WANTS to enter instead of what he actually did. So if you set your locale to US, since you're a US citizen, but you want to enter the number 12.34 in the Dutch style (because, you know, the Dutch are way cooler with numbers) so you enter 12,34 we will understand this and respect your wishes! Of course, if you change your mind and in the next input field you decide to use the decimal dot again, that's fine with us as well. We will do the hard work. Now, I am all for smart software. Software that can handle all sorts of input the user can think of. But this feels a little uhm, I don't know.. wrong.. Or am I too old fashioned?

  Read the article

• Rending 2D Tile World (With Player In The Middle)

  - by Mick

  What I have at the moment is a series of data structures I'm using, and I would like to render the world onto the screen (just the visible parts). I've actually already done this several times (lots of rewrites), but it's a bit buggy (rounding seems to make the screen jump ever so slightly every x tiles the player walks past). Basically I've been confusing myself heavily on what I feel should be a pretty simple problem... so here I am asking for some help! OK! So I have a 50x50 array holding the tiles of the world. I have the player position as 2 floats, x ([0, 49]) and y ([0, 49]) in that array. I have the application size exactly in pixels (x and y). I have an arbitrary TILE_SIZE static int (based on screen pixels). What I think is heavily confusing me is using a 2d orthogonal projection in opengl which maps (0,0) to the top left of the screen and (SCREEN_SIZE_X, SCREEN_SIZE_Y) to the bottom right of the screen. gl.glMatrixMode(GL.GL_PROJECTION); gl.glLoadIdentity(); glu.gluOrtho2D(0, getActualWidth(), getActualHeight(), 0); gl.glMatrixMode(GL.GL_MODELVIEW); gl.glLoadIdentity(); The map tiles are set so that the (0,0) in the array is the bottom left. And the player has to be in the middle on the screen (SCREEN_SIZE_X/2, SCREEN_SIZE_Y/2). What I've been doing so far is trying to render 1-2 tiles more all around what would be displayed on the screen so that I don't have to worry about figuring out rendering half a tile from the top left, depending where the player is. It seems like such an easy problem but after spending about 40+hours on it rewriting it many times I think I'm at a point where I just can't think clearly anymore... Any help would be appreciated. It would be great if someone can provide some very basic pseudo code on keeping the player in the middle when your projection is mapped to screen coordinates and only rendering basically the tiles that you would be any be see. Thanks!

  Read the article

• Is IE9 a modern browser?

  - by anirudha

  Is IE9 a modern browser? i show you a post who compare IE as well as they compare chrome. Is IE9 a modern browser? well Are you thing that they make something bettter then thing another that what Firefox and chrome do whenever Microsoft do this. that's point that Microsoft always blast IE because they make version upon version not upon update like Firefox make 3.6.14 after 3.6.13 and chrome give update soon as possible but IE not come soon. they will thing for making 10 instead of giving update on 9. well what they tell us new. they make fool public everytime i believe they make fool public as same as today they maked for version 9 they show developer tool in 9 have three new tabs or pael are this enough. whenever  in chrome and firefox their is many plugin who make development easier IE still have a developer tool who not have enough power like Firebug in Firefox. they show performance but forget luna user [window xp] and their IE never runs on other plateform but chrome and firefox can. no customization in IE whenever chrome and firefox have uncountable plugin and addons. show features now in IE who already implemented in firefox very early. well their is no rule that static goes right every time not sure that IE and Firefox both are right in their language. their is no one predict what thing goes better in future. so well keep a thing in mind never wasted time and also thing to make task easier even you need to use sollution opensource or closesoure inside or outside MS does not matter. well everyone tell you much more then they do even IE and some other. they never tell you this thing not in IE but in another can be found they never tell you use other whenever you need a thing and never can be found in their software. you need to more beware of IE because they make them commorcial not really for public if really then why they stop wxp user to use them as well firefox and chrome never force. because they need a thing that force more then more copy of windows sale. so they thing to add a thing in window 8. the IE9 they thing to make before that they thing to make  this for windows 8. they always force user to purchase this for this. this for this. and this trick sell their software. well outside MS Mozilla and Chrome all behave better with user and their feedback. they respect user their privacy and feedback. if you not believe that how much problem you found in IE and they got solved soon as in chrome and firefox bug kill soon. because IE not opensource we need to  boycutt them secondly their is no customization then they make user task easier even with twitter and facebook.

  Read the article

• 3D collision physics. Response when hitting wall, floor or roof

  - by GlamCasvaluir

  I am having problem with the most basic physic response when the player collide with static wall, floor or roof. I have a simple 3D maze, true means solid while false means air: bool bMap[100][100][100]; The player is a sphere. I have keys for moving x++, x--, y++, y-- and diagonal at speed 0.1f (0.1 * ftime). The player can also jump. And there is gravity pulling the player down. Relative movement is saved in: relx, rely and relz. One solid cube on the map is exactly 1.0f width, height and depth. The problem I have is to adjust the player position when colliding with solids, I don't want it to bounce or anything like that, just stop. But if moving diagonal left/up and hitting solid up, the player should continue moving left, sliding along the wall. Before moving the player I save the old player position: oxpos = xpos; oypos = ypos; ozpos = zpos; vec3 direction; direction = vec3(relx, rely, relz); xpos += direction.x*ftime; ypos += direction.y*ftime; zpos += direction.z*ftime; gx = floor(xpos+0.25); gy = floor(ypos+0.25); gz = floor(zpos+0.25); if (bMap[gx][gy][gz] == true) { vec3 normal = vec3(0.0, 0.0, 1.0); // <- Problem. vec3 invNormal = vec3(-normal.x, -normal.y, -normal.z) * length(direction * normal); vec3 wallDir = direction - invNormal; xpos = oxpos + wallDir.x; ypos = oypos + wallDir.y; zpos = ozpos + wallDir.z; } The problem with my version is that I do not know how to chose the correct normal for the cube side. I only have the bool array to look at, nothing else. One theory I have is to use old values of gx, gy and gz, but I do not know have to use them to calculate the correct cube side normal.

  Read the article

• Collision detection doesn't work for automated elements in XNA 4.0

  - by NDraskovic

  I have a really weird problem. I made a 3D simulator of an "assembly line" as a part of a college project. Among other things it needs to be able to detect when a box object passes in front of sensor. I tried to solve this by making a model of a laser and checking if the box collides with it. I had some problems with BoundingSpheres of models meshes so I simply create a BoundingSphere and place it in the same place as the model. I organized them into a list of BoundingSpheres called "spheres" and for each model I create one BoundingSphere. All models except the box are static, so the box object has its own BoundingSphere (not a member of the "spheres" list). I also implemented a picking algorithm that I use to start the movement. This is the code that checks for collision: if (spheres.Count != 0) { for (int i = 1; i < spheres.Count; i++) { if (spheres[i].Intersects(PickingRay) != null && Microsoft.Xna.Framework.Input.ButtonState.Pressed == Mouse.GetState().LeftButton) { start = true; break; } if (BoxSphere.Intersects(spheres[i]) && start) { MoveBox(0, false);//The MoveBox function receives the direction (0) and a bool value that dictates whether the box should move or not (false means stop) start = false; break; } if (start /*&& Microsoft.Xna.Framework.Input.ButtonState.Pressed == Mouse.GetState().LeftButton*/ && !BoxSphere.Intersects(spheres[i])) { MoveBox(0, true); break; } } The problem is this: When I use the mouse to move the box (the commented part in the third if condition) the collision works fine (I have another part of code that I removed to simplify my question - it calculates the "address" of the box, and by that number I know that the collision is correct). But when I comment it (like in this example) the box just passes trough the lasers and does not detect the collision (the idea is that the box stops at each laser and the user passes it forth by clicking on the appropriate "switch"). Can you see the problem? Please help, and if you need more informations I will try to give them. Thanks

  Read the article

• StringBuffer behavior in LWJGL

  - by Michael Oberlin

  Okay, I've been programming in Java for about ten years, but am entirely new to LWJGL. I have a specific problem whilst attempting to create a text console. I have built a class meant to abstract input polling to it, which (in theory) captures key presses from the Keyboard object and appends them to a StringBuilder/StringBuffer, then retrieves the completed string after receiving the ENTER key. The problem is, after I trigger the String return (currently with ESCAPE), and attempt to print it to System.out, I consistently get a blank line. I can get an appropriate string length, and I can even sample a single character out of it and get complete accuracy, but it never prints the actual string. I could swear that LWJGL slipped some kind of thread-safety trick in while I wasn't looking. Here's my code: static volatile StringBuffer command = new StringBuffer(); @Override public void chain(InputPoller poller) { this.chain = poller; } @Override public synchronized void poll() { //basic testing for modifier keys, to be used later on boolean shift = false, alt = false, control = false, superkey = false; if(Keyboard.isKeyDown(Keyboard.KEY_LSHIFT) || Keyboard.isKeyDown(Keyboard.KEY_RSHIFT)) shift = true; if(Keyboard.isKeyDown(Keyboard.KEY_LMENU) || Keyboard.isKeyDown(Keyboard.KEY_RMENU)) alt = true; if(Keyboard.isKeyDown(Keyboard.KEY_LCONTROL) || Keyboard.isKeyDown(Keyboard.KEY_RCONTROL)) control = true; if(Keyboard.isKeyDown(Keyboard.KEY_LMETA) || Keyboard.isKeyDown(Keyboard.KEY_RMETA)) superkey = true; while(Keyboard.next()) if(Keyboard.getEventKeyState()) { command.append(Keyboard.getEventCharacter()); } if (Framework.isConsoleEnabled() && Keyboard.isKeyDown(Keyboard.KEY_ESCAPE)) { System.out.println("Escape down"); System.out.println(command.length() + " characters polled"); //works System.out.println(command.toString().length()); //works System.out.println(command.toString().charAt(4)); //works System.out.println(command.toString().toCharArray()); //blank line! System.out.println(command.toString()); //blank line! Framework.disableConsole(); } //TODO: Add command construction and console management after that } } Maybe the answer's obvious and I'm just feeling tired, but I need to walk away from this for a while. If anyone sees the issue, please let me know. This machine is running the latest release of Java 7 on Ubuntu 12.04, Mate desktop environment. Many thanks.

  Read the article

• OAuth with RestSharp in Windows Phone

  - by midoBB

  Nearly every major API provider uses OAuth for the user authentication and while it is easy to understand the concept, using it in a Windows Phone app isn’t pretty straightforward. So for this quick tutorial we will be using RestSharp for WP7 and the API from getglue.com (an entertainment site) to authorize the user. So the first step is to get the OAuth request token and then we redirect our browserControl to the authorization URL private void StartLogin() {   var client = new RestClient("https://api.getglue.com/"); client.Authenticator = OAuth1Authenticator.ForRequestToken("ConsumerKey", "ConsumerSecret"); var request = new RestRequest("oauth/request_token"); client.ExecuteAsync(request, response => { _oAuthToken = GetQueryParameter(response.Content, "oauth_token"); _oAuthTokenSecret = GetQueryParameter(response.Content, "oauth_token_secret"); string authorizeUrl = "http://getglue.com/oauth/authorize" + "?oauth_token=" + _oAuthToken + "&style=mobile"; Dispatcher.BeginInvoke(() => { browserControl.Navigate(new Uri(authorizeUrl)); }); }); } private static string GetQueryParameter(string input, string parameterName) { foreach (string item in input.Split('&')) { var parts = item.Split('='); if (parts[0] == parameterName) { return parts[1]; } } return String.Empty; } Then we listen to the browser’s Navigating Event private void Navigating(Microsoft.Phone.Controls.NavigatingEventArgs e) { if (e.Uri.AbsoluteUri.Contains("oauth_callback")) { var arguments = e.Uri.AbsoluteUri.Split('?'); if (arguments.Length < 1) return; GetAccessToken(arguments[1]); } } private void GetAccessToken(string uri) { var requestToken = GetQueryParameter(uri, "oauth_token"); var client = new RestClient("https://api.getglue.com/"); client.Authenticator = OAuth1Authenticator.ForAccessToken(ConsumerKey, ConsumerSecret, _oAuthToken, _oAuthTokenSecret); var request = new RestRequest("oauth/access_token"); client.ExecuteAsync(request, response => { AccessToken = GetQueryParameter(response.Content, "oauth_token"); AccessTokenSecret = GetQueryParameter(response.Content, "oauth_token_secret"); UserId = GetQueryParameter(response.Content, "glue_userId"); }); } Now to test it we can access the user’s friends list var client = new RestClient("http://api.getglue.com/v2"); client.Authenticator = OAuth1Authenticator.ForProtectedResource(ConsumerKey, ConsumerSecret, GAccessToken, AccessTokenSecret); var request = new RestRequest("/user/friends"); request.AddParameter("userId", UserId,ParameterType.GetOrPost); // request.AddParameter("category", "all",ParameterType.GetOrPost); client.ExecuteAsync(request, response => { TreatFreindsList(); }); And that’s it now we can access all OAuth methods using RestSharp.

  Read the article

• [EF + Oracle] Inserting Data (1/2)

  - by JTorrecilla

  Prologue Following EF series (I ,II y III) in this chapter we will see how to create DB record from EF. Inserting Data Like we indicated in the 2º post: “One Entity matches with a DB record, and one property match with a Table Column”. To start, we need to create an object from one of the Entities: 1: EMPLEADOS empleado = new EMPLEADOS(); Also like, I told previously, Exists the possibility to use the Static Function defined by VS for each Entity: Once we have created the object, we can Access to it properties to fill like a common class:   1: empleado.NOMBRE = "Javier Torrecilla";   After finish of fill our Entity properties, it must be needed to add the object to the appropriate ObjectSet in the ObjectContext: 1: enti.EMPLEADOS.AddObject(empleado); or 1: enti.AddToEMPLEADOS(empleado); Both methods will do the same action, create an insert statement. Have we finished? No. Any Entity has a property called “EntityState”. This prop is an Enum from “EntityState”, which has the following: Detached: the Entity is created, but not added to the Context. Unchanged: There is no pending changes in the Entity. Added: The entity is added to the ObjectSet, but it is not yet sent to the DB. Deleted: The object is deleted form the ObjectSet, but not yet from the DB. Modified: There is Pending Changes to confirm. Let’s see, the several values of the property during the Creation steps: 1. While the Object is created and we are filling the props: EntityState.Detached; 2. After adding to the ObjectSet: EntityState.Added. This not indicated that the record is in the DB 3. Saving the Data: To sabe the data in the DB, we are going to call “SaveChanges” method of the Object Context. After invoke it, the property will be EntityState.Unchanged.   What does SaveChanges Method? This function will synchronize and send all pending changes to DB. It will add, modify or delete all Entities, whose EntityState property, is setted to Added, Deleted or Modified. After finishing, all added or modified entities will be change the State to “Unchanged”, and deleted Entities must take the “Detached” state.

  Read the article

• Java Grade Calculator program for class kepp geting the error "Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException." [migrated]

  - by user2880621

  this is my first question I've posted. I've used this site to look at other questions to help with similar problems I've had. After some cursory looking I couldn't find quite the answer I was looking for so I decided to finally succumb and create an account. I am fairly new to java, only a few weeks into my first class. Anyway, my project is to create a program which takes any amount of students and their grades, and then assign them a letter grade. The catch is, however, that it is on a sort of curve and the other grades' letter are dependent on the the highest. Anything equal to or 10 points below the best grade is an a, anything 11-20 points below is a b, and so on. I am to use an array, but I get this error when ran "Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException." I will go ahead and post my code down below. Thanks for any advice you may be able to give. package grade.calculator; import java.util.Scanner; /** * * @author nichol57 */ public class GradeCalculator { /** * @param args the command line arguments */ public static void main(String[] args) { Scanner input = new Scanner(System.in); System.out.println("Enter the number of students"); int number = input.nextInt(); double[]grades = new double [number]; for (int J = number; J >=0; J--) { System.out.println("Enter the students' grades"); grades[J] = input.nextDouble(); } double best = grades[0]; for (int J = 1; J < number; J++) { if (grades[J] >= best){ best = grades[J]; } } for (int J = 0;J < number; J++){ if (grades[J] >= best - 10){ System.out.println("Student " + J + " score is " + grades[J] + " and grade is " + "A"); } else if (grades[J] >= best - 20){ System.out.println("Student " + J + " score is " + grades[J] + " and grade is " + "B"); } else if (grades[J] >= best - 30) { System.out.println("Student " + J + " score is " + grades[J] + " and grade is " + "C"); } else if (grades[J] >= best - 40) { System.out.println("Student " + J + " score is " + grades[J] + " and grade is " + "D"); } else { System.out.println("Student " + J + " score is " + grades[J] + " and grade is " + "F"); } } // end for loop for output }// end main method }

  Read the article

• How best to look up objects by label?

  - by dsollen

  I am writing the server backed by a pre-written API. I'm going to get a number of strings representing ports, signals, paths, etc etc etc. I need to look up the object associated with a given label, these objects are all in memory (no sql magic to do this for me). My question is, how best do I associate a given unique label with the mutable object it represents? I have enough objects that looking through every signal or every port to find the one that matches is possible, but may be slightly too slow. To be honest the direct 'look at every object' method is probably good enough for so small a body of objects and anything else is premature optimization, but I still am curious what the proper solution would be if I thought my signals were going to grow a bit larger. As I see it there are two options available. First would be to to create a 'store' that is a simple map between object and label. I could have it so that every time I call addObject the object is automatically saved into a hashmap or the like. This works, but relies on my properly adding and deleting each object so the map doesn't grow indefinitely. The biggest issue to me is that this involves having some hidden static map in my ModelObject class that just feels...wrong somehow. The other option is to have some method that can interpret the labels. All of these labels are derived from the underlying objects. So I can look at the signal label, for instance, and say "these 20 characters are the port" to figure out what port I need. This would allow me to quickly figure out what I need. However, if the label method is changed the translateLabelToObject method needs to be updated as well or everything breaks. Which solution is cleaner, or possibly a cleaner solution than either of above? For the record I'm working with sufficient number of variables to make direct comparison a little slow, but not enough to be concerned about memory overhead, written in java. All objects that have labels I need to look up extend the same parent class.

  Read the article

• Storing a looong lookup table

  - by inquisitive

  Background The product i am working on has a very long lookup-table. the table contains static data and cannot be auto generated. there are about 500 rows and 10 columns. columns have mostly integers and strings. to complicate the matters, there are actually two such tables. every row in table-1 maps to zero-or-more rows in table-2. we use an SQLite database with two tables. the product installer places the SQLite file in the installation directory. the application is written in dot-net and we use ADO to load the data once on startup. now, the lookup table grows. in each release a month, we add about 10 new entries existing entries are adjusted. every release we fine tune existing entries. The problem a team of (10) developers work on the lookup table. Code goes in the SVN, but the little devil the SQLite does not. this prevents multiple developers to work on it. we do take regular backups of the file, but proper versioning is not possible. we never know who did the breaking change. the worse thing is we dont know if there is any change at all. diff'ing databases is tedious if not impossible. the tables are expected to grow quite large in years to come and we would need developers to work in parallel on it. the data is business critical. we need to be able to audit changes made to it. Question What would be a solution for the problems outlines above? one idea was to transform the whole thing to XML and treat it like just another source file. that way SVN can do the versioning and we can work in parallel. but the data shows relational behavior. with XML we loose the unique and foreign-key constraints. also we cant query it with sql like ease. any help here will be appreciated.

  Read the article

• Operation times out trying to SSH outside LAN i.e. from internet to LAN no connection is established

  - by Pelle L

  I run Ubuntu 12.04 and have no success connecting with SSH from "Internet". The router is a TL-MR3420 which is set up to forward requests to one of the NIC's on ubuntu machine (which has in total 3 NICs). I can SSH from a client on the "local" network/LAN. The forward mechanism in the router seems to work. If I stop SSH service on the Ubuntu machine and instead start one on the windows machine - it works like a charm. I do not use the Std port 22 but that shouldn't be an issue as far as I understand - sine it works on the same port on the win machine. Since my public IS isn't static I use a dynDNS service but as said earlier the same setup works from the win machine. The router is located on 192.168.0.1 The Ubuntu NICs has the following IP: eth2 192.168.0.100 , eth1 192.168.0.101 , eth0 192.168.0.102 and I have forwarded the "outside" request to 192.168.0.100 In regards for firewall settings on the Ubuntu machine I have disabled the ufw and the command ufw status give status: inactive. I don't now it this is relevant information but teh command iptables --list give: Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I have tried to catch traffic with help of wireshark (a tool I'm not too used to use) and it seems as a few (3?) "requests" actually reaches the NIC but ... nothing happens. The syslog does not show any entries during these attempts. Perhaps it could be some routing issues but I have reached my level of competence and are stuck ... all help and support to get this sorted out is much appreciated. I'm new to Linux so please do not assume I have a configuration that is correct - but as I wrote earlier - if the client that initiate SSH is on the LAN it all works. PS:I have also tried to get VPN (PPP) working from Internet with no success - once again VPN works on the windows machine ... so my best guess is that this is related to how the ubuntu machine handles (IP) traffic and not the TL-MR3420 router or other network issues.

  Read the article

• What are the best practices to use NHiberante sessions in asp.net (mvc/web api) ?

  - by mrt181

  I have the following setup in my project: public class WebApiApplication : System.Web.HttpApplication { public static ISessionFactory SessionFactory { get; private set; } public WebApiApplication() { this.BeginRequest += delegate { var session = SessionFactory.OpenSession(); CurrentSessionContext.Bind(session); }; this.EndRequest += delegate { var session = SessionFactory.GetCurrentSession(); if (session == null) { return; } session = CurrentSessionContext.Unbind(SessionFactory); session.Dispose(); }; } protected void Application_Start() { AreaRegistration.RegisterAllAreas(); FilterConfig.RegisterGlobalFilters(GlobalFilters.Filters); RouteConfig.RegisterRoutes(RouteTable.Routes); BundleConfig.RegisterBundles(BundleTable.Bundles); var assembly = Assembly.GetCallingAssembly(); SessionFactory = new NHibernateHelper(assembly, Server.MapPath("/")).SessionFactory; } } public class PositionsController : ApiController { private readonly ISession session; public PositionsController() { this.session = WebApiApplication.SessionFactory.GetCurrentSession(); } public IEnumerable<Position> Get() { var result = this.session.Query<Position>().Cacheable().ToList(); if (!result.Any()) { throw new HttpResponseException(new HttpResponseMessage(HttpStatusCode.NotFound)); } return result; } public HttpResponseMessage Post(PositionDataTransfer dto) { //TODO: Map dto to model IEnumerable<Position> positions = null; using (var transaction = this.session.BeginTransaction()) { this.session.SaveOrUpdate(positions); try { transaction.Commit(); } catch (StaleObjectStateException) { if (transaction != null && transaction.IsActive) { transaction.Rollback(); } } } var response = this.Request.CreateResponse(HttpStatusCode.Created, dto); response.Headers.Location = new Uri(this.Request.RequestUri.AbsoluteUri + "/" + dto.Name); return response; } public void Put(int id, string value) { //TODO: Implement PUT throw new NotImplementedException(); } public void Delete(int id) { //TODO: Implement DELETE throw new NotImplementedException(); } } I am not sure if this is the recommended way to insert the session into the controller. I was thinking about using DI but i am not sure how to inject the session that is opened and binded in the BeginRequest delegate into the Controllers constructor to get this public PositionsController(ISession session) { this.session = session; } Question: What is the recommended way to use NHiberante sessions in asp.net mvc/web api ?

  Read the article

• The term "interface" in C++

  - by Flexo

  Java makes a clear distinction between class and interface. (I believe C# does also, but I have no experience with it). When writing C++ however there is no language enforced distinction between class and interface. Consequently I've always viewed interface as a workaround for the lack of multiple inheritance in Java. Making such a distinction feels arbitrary and meaningless in C++. I've always tended to go with the "write things in the most obvious way" approach, so if in C++ I've got what might be called an interface in Java, e.g.: class Foo { public: virtual void doStuff() = 0; ~Foo() = 0; }; and I then decided that most implementers of Foo wanted to share some common functionality I would probably write: class Foo { public: virtual void doStuff() = 0; ~Foo() {} protected: // If it needs this to do its thing: int internalHelperThing(int); // Or if it doesn't need the this pointer: static int someOtherHelper(int); }; Which then makes this not an interface in the Java sense anymore. Instead C++ has two important concepts, related to the same underlying inheritance problem: virtual inhertiance Classes with no member variables can occupy no extra space when used as a base "Base class subobjects may have zero size" Reference Of those I try to avoid #1 wherever possible - it's rare to encounter a scenario where that genuinely is the "cleanest" design. #2 is however a subtle, but important difference between my understanding of the term "interface" and the C++ language features. As a result of this I currently (almost) never refer to things as "interfaces" in C++ and talk in terms of base classes and their sizes. I would say that in the context of C++ "interface" is a misnomer. It has come to my attention though that not many people make such a distinction. Do I stand to lose anything by allowing (e.g. protected) non-virtual functions to exist within an "interface" in C++? (My feeling is the exactly the opposite - a more natural location for shared code) Is the term "interface" meaningful in C++ - does it imply only pure virtual or would it be fair to call C++ classes with no member variables an interface still?

  Read the article

• How to run WordPress and Java web app running on Tomcat on the same server?

  - by Chantz

  I have to run a WordPress site served via Apache2 & Java-based webapp using Tomcat on the same server. When users come to example.com or example.com/public-pages they need to served from WordPress but when they come to example.com/private-pages they need to be served from the Tomcat. I have asked this question on serverfault where they suggested using different port, different IP & sub-domain. I want to go for different port solution since it will mean I need to buy only one SSL certificate. I tried doing the reverse proxy method by having the following in my default-ssl.conf <VirtualHost _default_:443> ServerAdmin webmaster@localhost ServerName localhost:443 DocumentRoot /var/www <Directory /var/www> #For Wordpress Options FollowSymLinks AllowOverride All </Directory> <Proxy *> Order deny,allow Allow from all </Proxy> ProxyRequests Off ProxyPass /private-pages ajp://localhost:8009/ ProxyPassReverse /private-pages ajp://localhost:8009/ SSLEngine on SSLProxyEngine On SSLCertificateFile /etc/apache2/ssl/apache.crt SSLCertificateKeyFile /etc/apache2/ssl/apache.key </VirtualHost> As you have noticed I am using mod_proxy_ajp in Apache2 for this. And that my Tomcat is listening to port 8009 and then serving content. So now when I go to example.com/private-pages I am seeing the content from my Tomcat. But 2 issues are happening. All my static resources are getting 404-ed, so none of my images, CSS, js are getting loaded. I see that the browser is requesting for the resources using URL example.com/css/* This will clearly not work because it translates to example.com:80/css/* instead of example.com:8009/css/* & there are no such resources in the WordPress directory. If I go to example.com/private-pages/abcd I am somehow kicked to the WordPress site (which obviously displays a 404 page). I can understand why #1 is happening but have no clue why the #2 is happening. Regardless, if there is another clean solution for resolving this, I would appreciate y'alls help.

  Read the article

• Why do I have to divide the origin of a quad by 4 instead of 2?

  - by vinzBad

  I'm currently transitioning from C#/XNA to C#/OpenTK but I'm getting stuck at the basics. So I have this Sprite-Class: public static bool EnableDebugDraw = true; public float X; public float Y; public float OriginX = 0; public float OriginY = 0; public float Width = 0.1f; public float Height = 0.1f; public Color TintColor = Color.Red; float _layerDepth = 0f; public void Render() { Vector2[] corners = { new Vector2(X-OriginX,Y-OriginY), //top left new Vector2(X +Width -OriginX,Y-OriginY),//top right new Vector2(X +Width-OriginX,Y+Height-OriginY),//bottom rigth new Vector2(X-OriginX,Y+Height-OriginY)//bottom left }; GL.Color3(TintColor); GL.Begin(BeginMode.Quads); { for (int i = 0; i < 4; i++) GL.Vertex3(corners[i].X,corners[i].Y,_layerDepth); } GL.End(); if (EnableDebugDraw) { GL.Color3(Color.Violet); GL.PointSize(3); GL.Begin(BeginMode.Points); { for (int i = 0; i < 4; i++) GL.Vertex2(corners[i]); } GL.End(); GL.Color3(Color.Green); GL.Begin(BeginMode.Points); GL.Vertex2(X + OriginX, Y + OriginY); GL.End(); } With the following setup I try to set the origin of the quad to the middle of the quad. _sprite.OriginX = _sprite.Width / 2; _sprite.OriginY = _sprite.Height / 2; but this sets the origin to the upper right corner of the quad, so i have to _sprite.OriginX = _sprite.Width / 4; _sprite.OriginY = _sprite.Height / 4; However this is not the intended behaviour, could you advise me how I fix this?

  Read the article

• BizTalk Orchestration & Port Tutorial Part 2

  - by bosuch

  In Part 1 I showed how to create and publish a simple Orchestration demo. Now we’ll finish configuring it in the admin console and test it. Open the BizTalk Server 2009 Administration Console, and expand BizTalk Server 2009 Administration, then Applications. You should have an entry for OrchestrationPortDemo – expand it as well. First, we’ll add the Receive Port – the place that we’ll drop the test file. Right-click on Receive Ports and select New One-way Receive Port. On the General tab, name it InputPort, then click over to Receive Locations.   Click New to add a new location. Your receive location can be FTP, SQL, WCF, SharePoint, or many other choices, but for this demo we’ll add a File location. Click the Configure button and set a receive folder (something like “C:\PortDemo\”) and a file mask (stick with “*.xml” for now) and click OK three times to create your Receive Port.   Next we’ll create the Send port – the location where BizTalk will drop the file. Right-click on Send Ports and choose New Static One-way Send Port. Give it an appropriate name, and configure the FILE Transport Properties as shown:   Click OK twice and your Send Port will be created. Now we’ll configure the Orchestration Bindings. Click on Orchestrations, then right-click the orchestration itself and select Properties. Select the Bindings tab. Choose BizTalkServerApplication as the host, and select the Send and Receive ports you previously created, as shown:   Now it’s time to fire everything up. Right-click on the send port you created and click Start. Once the Status column displays “Started”, click on Receive Locations and Enable the Receive Location previously created. Finally, start the Orchestration. Now, time to test! Create a simple xml file like: <root>    <Node1>Test</Node1>    <Node2>Test</Node2> </root> And drop it into the C:\PortDemo folder. After a couple of seconds the file should disappear – this indicates BizTalk has picked it up for processing. Look in the C:\PortDemo\Output folder and you should see an xml file with a GUID for a name, like {7C50104F-FC3E-4A49-B2FA-4F560A37636D}.xml. Open it to verify that it matches your input file. Practically, this demo doesn’t do a whole heck of a lot, but it shows you the basics for building, publishing and running an orchestration.

  Read the article

< Previous Page | 496 497 498 499 500 501 502 503 504 505 506 507  | Next Page >