Search Results

Search found 29426 results on 1178 pages for 'user99572 is fine'.

Page 503/1178 | < Previous Page | 499 500 501 502 503 504 505 506 507 508 509 510  | Next Page >

• Huawei E3276 LTE uplink slow in the routing Ubuntu, but not with other devices in the LAN

  - by Mytomi

  I have a Huawei E3276 LTE dongle (12d1:14fe - 12d1:1506) and a problem with the upstream speed. The problem is not only present with Ubuntu 14.04 LTS (64 bit workstation, kernel 3.16), but also with Raspbian Jessie for Raspberry PI (kernel 3.14). Upstream seems to be always limited to 5 Mbit/s whenever I check the speed from the Linux computer that I use as a LTE router. The other computers in the LAN always get about 10-15 Mbit/s upstream, even though the traffic is routed through the same Linux computer suffering from seemingly capped uplink. Downstream speed is always fine, 25 Mbit/s. I even installed Windows 7 in the same computer as Ubuntu and the speeds are 25 Mbit/s down, 15 Mbit/s up. So the problem is not with E3276 device itself or in the mobile subscription, but in the Huawei E3276 Linux compatibility. Maybe something in the kernel? I have made sure that the matter is not with iptables rules: the speed does not noticeably increase when iptables is disabled. Turning off IPv4 forwarding does not improve speed either. I'm not sure what settings and logs do help in debugging the situation. Please ask for more details, if you have a clue what might be wrong. Thanks, Mytomi

  Read the article

• Server Firewall preventing sending of email [migrated]

  - by Jo Fitzgerald

  The firewall on my VPS appears to be preventing my site from sending email. It was working fine until the end of last month. My hosting provider (Webfusion) has been next to useless. I am able to send email if I open INPUT ports 32768-65535, but not if these ports are closed. Why would this be? I have the following rules in my firewall: # sudo iptables -L Chain INPUT (policy DROP) target prot opt source destination VZ_INPUT all -- anywhere anywhere Chain FORWARD (policy DROP) target prot opt source destination VZ_FORWARD all -- anywhere anywhere Chain OUTPUT (policy DROP) target prot opt source destination VZ_OUTPUT all -- anywhere anywhere Chain VZ_FORWARD (1 references) target prot opt source destination Chain VZ_INPUT (1 references) target prot opt source destination ACCEPT tcp -- anywhere anywhere tcp dpt:www ACCEPT tcp -- anywhere anywhere tcp dpt:https ACCEPT tcp -- anywhere anywhere tcp dpt:smtp ACCEPT tcp -- anywhere anywhere tcp dpt:ssmtp ACCEPT tcp -- anywhere anywhere tcp dpt:pop3 ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpts:32768:65535 ACCEPT udp -- anywhere anywhere udp dpts:32768:65535 ACCEPT tcp -- localhost.localdomain localhost.localdomain ACCEPT udp -- localhost.localdomain localhost.localdomain Chain VZ_OUTPUT (1 references) target prot opt source destination ACCEPT tcp -- anywhere anywhere ACCEPT udp -- anywhere anywhere The VPS is running Plesk 10.4.4 (please ask if you require further technical information to help me)

  Read the article

• Screen lock broken when using separate x screens

  - by Wolf

  For some reason, the screen lock appears to be broken when I use separate x screens (it works fine if I use twin view or just one monitor, though). If I wait for the screen to lock (or if I tell it to lock), it fades to black, showing only the mouse cursor. However, when I move the mouse to bring up the password prompt, nothing happens, the screens remain completely blank. Furthermore, it would appear that the screen lock never activated in the first place, for two reasons: one, if I blindly enter my password and press enter, nothing happens; and two, if I press ctrl+alt+delete and then enter it logs me out (which shouldn't happen if the password prompt is there, right), losing any progress I have on any of the open programs (meaning, not a very friendly option for a programmer ;) ). So yeah, does anyone know why this is happening, and how to fix it? Thanks! Notes: I am using Ubuntu 11.10 64 bit. I am using gnome-classic, but the same problem occurs when I use unity. I do not have xscreensaver, nor do I have any screen savers running (except, I guess for the default blank one).

  Read the article

• Camera wont stay behind model after pitch, then rotation

  - by ChocoMan

  I have a camera position behind a model. Currently, if I push the left thumbstick making my model move forward, backward, or strafe, the camera stays with the model. If I push the right thumbstick left or right, the model rotates in those directions fine along with the camera rotating while maintaining its position relatively behind the model. But when I pitch the model up or down, then rotate the model afterwards, the camera moves slightly rotates in a clock-like fashion behind the model. If I do a few rotations of the model and try to pitch the camera, the camera will eventually be looking at the side, then eventually the front of the model while also rotating in a clock-like fashion. My question is, how do I keep the camera to pitch up and down behind the model no matter how much the model has rotated? Here is what I got: // Rotates model and pitches camera on its own axis public void modelRotMovement(GamePadState pController) { // Rotates Camera with model Yaw = pController.ThumbSticks.Right.X * MathHelper.ToRadians(angularSpeed); // Pitches Camera around model Pitch = pController.ThumbSticks.Right.Y * MathHelper.ToRadians(angularSpeed); AddRotation = Quaternion.CreateFromYawPitchRoll(Yaw, 0, 0); ModelLoad.MRotation *= AddRotation; MOrientation = Matrix.CreateFromQuaternion(ModelLoad.MRotation); } // Orbit (yaw) Camera around with model (only seeing back of model) public void cameraYaw(Vector3 axisYaw, float yaw) { ModelLoad.CameraPos = Vector3.Transform(ModelLoad.CameraPos - ModelLoad.camTarget, Matrix.CreateFromAxisAngle(axisYaw, yaw)) + ModelLoad.camTarget; } // Raise camera above or below model's shoulders public void cameraPitch(Vector3 axisPitch, float pitch) { ModelLoad.CameraPos = Vector3.Transform(ModelLoad.CameraPos - ModelLoad.camTarget, Matrix.CreateFromAxisAngle(axisPitch, pitch)) + ModelLoad.camTarget; } // Call in update method public void updateCamera() { cameraYaw(Vector3.Up, Yaw); cameraPitch(Vector3.Right, Pitch); } NOTE: I tried to use addPitch just like addRotation but it didn't work...

  Read the article

• Highly scalable and dynamic "rule-based" applications?

  - by Prof Plum

  For a large enterprise app, everyone knows that being able to adjust to change is one of the most important aspects of design. I use a rule-based approach a lot of the time to deal with changing business logic, with each rule being stored in a DB. This allows for easy changes to be made without diving into nasty details. Now since C# cannot Eval("foo(bar);") this is accomplished by using formatted strings stored in rows that are then processed in JavaScript at runtime. This works fine, however, it is less than elegant, and would not be the most enjoyable for anyone else to pick up on once it becomes legacy. Is there a more elegant solution to this? When you get into thousands of rules that change fairly frequently it becomes a real bear, but this cannot be that uncommon of a problem that someone has not thought of a better way to do this. Any suggestions? Is this current method defensible? What are the alternatives? Edit: Just to clarify, this is a large enterprise app, so no matter which solution works, there will be plenty of people constantly maintaining its rules and data (around 10). Also, The data changes frequently enough to say that some sort of centralized server system is basically a must.

  Read the article

• Phishing attack stuck with jsp loginAction.do page?

  - by user970533

  I'm testing a phishing website on a staged replica of an jsp web-application. I'm doing the usual attack which involves changing the post and action field of source code to divert to my own written jsp script capture the logins and redirect the victim to the original website. It looks easy, but trust me, it's has been me more then 2 weeks and I cannot write the logins to the text file. I have tested the jsp page on my local wamp server it works fine. In staged, when I click on the ok button for user/password field I'm taken to loginAction.do script. I checked this using the tamper data add-on on Firefox. The only way I was able to make my script run was to use burp proxy intercept the request and change action parameter to refer my uploaded script. I want to know what does an loginAction.do? I have googled it - it's quite common to see it in jsp application. I have checked the code; there is nothing that tells me why the page always points to the .do script instead of mine. Is there some kind of redirection in Tomcat? I like to know. I'm unable to exploit this attack vector? I need the community's help.

  Read the article

• Ethernet card not detected on Ubuntu Server 12.04

  - by Dana

  My onboard ethernet isn't detected after a re-install of Server 12.04. For reasons I won't get into here, I had to put the server's drive into another machine to install Ubuntu, then swap back into the server. So the server starts up fine, except for the "Waiting for network configuration". I read in another article that Server, by default, doesn't handle new mac addresses for hardware changes dynamically, unlike Ubuntu Desktop, but a look at /etc/udev/rules.d/70-persistent-net.rules shows only one ethernet interface. Shouldn't it show both the old, and the new? lspci -vv shows an ethernet interface, so what the heck is going on? I should mention that the onboard LAN is enabled in the BIOS. And I know this isn't important, but all this started when I changed some network configuration settings in webmin before the re-install. It couldn't download any updates, so I tinkered a little. Broke, it, installed FreeNAS, which worked, but I didn't like it, then went back to Ubuntu Server, and now I'm in this pickle. Thanks for any advice!

  Read the article

• The Hot-Add Memory Hogs

  - by Andrew Clarke

  One of the more difficult tasks, when virtualizing a server, is to determine the amount of memory that Hypervisor should assign to the virtual machine. This requires accurate monitoring and, because of the consequences of setting the value too low, there is a great temptation to err on the side of over-provisioning. This results in fewer guest VMs and, in fact, with more accurate memory provisioning, many virtual environments could support 30% more VMs. In order to achieve a better consolidation (aka VM density) ratio, Windows Server 2008 R2 SP1 has introduced what Microsoft calls ‘Dynamic Memory’. This means that the start-up RAM VM memory assigned to guest virtual machines can be allowed to vary according to demand, changing dynamically while the VM is running, based on the workload of applications running inside. If demand outstrips supply, then memory can be rationed according to the ‘memory weight’ assigned to the guest VM. By this mechanism, memory becomes a shared resource that can be reallocated automatically as demand patterns vary. Unlike VMWare’s Memory Overcommit technology, the sum of all the memory allocations to each virtual machine will not exceed the total memory of the host computer. This is fine for applications that are self-regulating in their demands for memory, releasing memory back into the 'pool' when not under peak load. Other applications however, such as SQL Server Standard and Enterprise, are by nature, memory hogs under high workload; they can grab hot-add memory whilst running under load and then never release it. This requires more careful setting-up and the SQLOS team have provided some guidelines from for configuring SQL Server in virtual environments. Whereas VMWare’s Memory Overcommit is well-proven in a number of different configurations, Hyper-V’s ‘Dynamic Memory’ is new. So far, the indications are that it will improve the business case for virtualizing and it is probably a far more intuitive technology for the average IT professional to grasp. It is certainly worth testing to see whether it works for you.

  Read the article

• WordPress page title repeated in SOME pages

  - by cmykrgbb

  I have created a Wordpress site and titles were working just fine. Then, some time and plugins installed later, I noticed that in SOME pages I get the title repeated 2 times. Example of wrong page title: Contact - NAME | NAME Example of normal title: Our Services | NAME Now, if I go to General Settings and change title it will change both, no improvement. SEO by Yoast has the option to reset page titles, but that just removes all titles leaving the current URL as page title, so no good either. Here is the code I originally had: <title><?php wp_title(''); ?><?php if(wp_title('', false)) { echo ' | '; } ?><?php bloginfo('name'); ?></title> Here is the code I am using now: <title><?php wp_title('|'); ?></title> To sum up, I think somewhere in the database there's a wp_title repeated: once using '-' as separator, another one (the current one) using '|'. Any help will be most appreciated, thanks!

  Read the article

• Conditional attribute in XML - most concise solution?

  - by Lech Rzedzicki

  I am tasked with setting up conditional profiling - a method of tagging chunks of XML with an attribute, which will then be used as a conditional value to extract subset of that XML. Have a look at another definition/example: DITA profiling The XML is documents that are equivalent to printed books - i.e. documents that are often looked at by a human, even if indirectly. Therefore I am looking at a few requirements here: 1. keeping the value list brief - so it doesn't affect the readability of the document 2. be able to process with standard XML tools - a space-separated list inside an attribute is still probably fine, but I'd rather not use too much regexp for this 3. be obvious for various users, including 3rd parties, which content goes where 4. Be easy to maintain going forward Therefore one easy solution is: The problem with this: 1. As the list grows the value of the attribute can be a bit verbose 2. One needs to explicitly state every value even if it's a scenario of this vs everything else Therefore I am also looking at other approaches such as: 1. Using + and - modifiers, Apache htaccess style to override the default cascading of profiling - by default all content goes everywhere and if we want to exclude a bit we just say "-kindle". It does require parsing the whole tree, is not supported by editing tools and one needs to regexp the attribute value a bit deeper... 2. Using an intermediate file to define groups of values such as "other" or "non-print", example of this in DITA. It allows concise XML as well as different grouping and values for each document but it does create a certain level of abstraction which may make it a little less obvious for a 3rd party? Altogether, if you received such XML and were tasked to process it, which option you'd rather receive? If you have any experiences like that, even in an unrelated areas such a builds, don't hesitate to comment!

  Read the article

• How to set acpi=off for installation?

  - by Johan Helgø

  I'm trying to install Ubuntu 12.04 LTS 64bit from a USB created in Windows using the recommended software from pendrivelinux. The USB is tested on two laptops and works fine. The install does not work on my desktop PC, it either hangs with lots of text on the screen, or it just gives me a screen with garbled colors. Right now it hangs on "[3.925311] Initializing USB Mass Storage driver...", but it hangs on different spots every time I try. I know that acpi=off will fix this. On older versions, there used to be a pink screen with the icon of a keyboard, at that screen I could press ESC, and I would then get a long list of languages, I could choose English, and then I would get options for setting acpi=off, then install without any problems. This new install menu does not have those options. The (now black and white) "Installer boot menu"'s advanced options is blank. There simply are no advanced options. If I go to help, then press F6, I get to a help screen describing the different boot parameters. I see examples of writing "Install acpi=off" However, writing "install acpi=off" it gives an error saying "could not find kernel image: install". How can I install Ubuntu 12.04 with acpi=off? (Oh, btw, nothing happens if I press F6 in the "Installer boot menu")

  Read the article

• python: os.system does not execute shell comand

  - by capoluca

  I need to execute shell command in python program (I have ubuntu). More specifically I want to create graph using graphviz in python script. My code is os.system("dot -Tpng graph.dot -o graph.png") It does not work, but if I just type dot -Tpng graph.dot -o graph.png in command line then everything is fine. Do you know what the problem? Thank you! Edit: Does not work means that nothing happens, there are no errors. Output from dot -v -Tpng graph.dot -o graph.png: dot - graphviz version 2.26.3 (20100126.1600) Activated plugin library: libgvplugin_pango.so.6 Using textlayout: textlayout:cairo Activated plugin library: libgvplugin_dot_layout.so.6 Using layout: dot:dot_layout Using render: cairo:cairo Using device: png:cairo:cairo The plugin configuration file: /usr/lib/graphviz/config6 was successfully loaded. render : cairo dot fig gd map ps svg tk vml vrml xdot layout : circo dot fdp neato nop nop1 nop2 osage patchwork sfdp twopi textlayout : textlayout device : canon cmap cmapx cmapx_np dot eps fig gd gd2 gif gv imap imap_np ismap jpe jpeg jpg pdf plain plain-ext png ps ps2 svg svgz tk vml vmlz vrml wbmp x11 xdot xlib loadimage : (lib) eps gd gd2 gif jpe jpeg jpg png ps svg

  Read the article

• To my lola

  - by Erik Araojo

  Originally posted on: http://geekswithblogs.net/Erik/archive/2013/06/29/153290.aspx I've been staring at the computer for a few minutes now and I honestly don't know what to write.  First I thought of writing about myself, where I was born, where I studied, where I am now... but that seems shallow.  Now that I thought about it.  I'd rather not talk about who I am because it seems irrelevant right now.  What I really want to say is..I'm sad.  Been like this for quite some time now.Nobody knows I'm sad.I tried telling my wife but I guess she didn't think it was serious.  We were having a fight when I told her so she probably thought I was just making up an excuse for my behavior.  And besides, she's not the kind of person who'd put my interests before hers especially when she's got lots of things on her mind.I'm not sad every single day.  Some days I'm perfectly fine.  I actually have no idea when I'd feel sad.  It just happens. I'd wake up cheerful and then before I go to bed I already feel depressed.  I have no idea what triggers it.  On the bed, I'd turn my back to my wife, curl up into a fetal position and start sobbing silently. Awful.  Maybe you're wondering now what's the cause of all this.My grandma passed away and I haven't completely  come to terms with that fact.  I long to see her, talk to her and hold her... but I can't do that anymore because she's gone.  I will never be able to hear her voice and feel her touch again.  To make matters worse, the only person whom I wish would stay beside me whenever I'm feeling miserable and dejected is never around.  She's either working late or out with her friends.  Such is my life at the moment.  I doubt it will improve anytime soon.

  Read the article

• Black Screen after Resume from Sleep (Kubuntu)

  - by user20271

  I know there is a lot of other posts like this, but I have been looking for hours and I still haven't found any solution. I have recently installed Kubuntu Linux along side my Windows 7, the sleep on my Win7 works fine and resumes like normal. When I am loaded into Kubuntu, and I put my laptop to sleep, it goes into sleep as normal. When I go to RESUME from the sleep, the screen stays solid black, it doesn't light up, no blinking curser or anything. The Wi-Fi light is 'off' (orange) and I cannot turn it on. The Caps lock and the Num lock lights on the keyboard blink slowly. I hear something on the inside of the computer start to spin. I am not very experienced with Kubuntu/Linux, but I do know a bunch of computer terminology, I am still far from an expert though. I have about 300GB designated to my Win7 stuff, and another partition with about 100GB for my Kubuntu Linux. My computers specs are as follows: Windows 7 64-bit I have the most recent version of Kubuntu because I just downloaded it a few days ago and updated it yesterday. AMD Athlon Duel-Core processor 4GB of RAM And it is a HP G61 Laptop

  Read the article

• Deploying war files in tomcat6

  - by user3215

  I am using tomcat5.5 for a long on ubuntu servers 8.10 and 9.10 and '/usr/share/tomcat/webapps/' is the path where I place my .war files and access them on the browser over network. On a sytem I've installed tomcat6 and I'm failing to find that where do I place my .war file of tomcat6's webapps. I checked deploying war under /var/lib/tomcat6/webapps/ and the war file is extracted and I think this should be the location but I could not access the page when I tried http://serverip:8080/myapp. I could access the default page properly when I navigate to http://serverip:8080. The same war file is working fine on tomcat servers which were not installed from apt repository. Log Messages: INFO: Stopping Coyote HTTP/1.1 on http-8080 2 Dec, 2010 10:06:29 AM org.apache.coyote.http11.Http11Protocol init INFO: Initializing Coyote HTTP/1.1 on http-8080 2 Dec, 2010 10:06:29 AM org.apache.catalina.startup.Catalina load INFO: Initialization processed in 523 ms 2 Dec, 2010 10:06:29 AM org.apache.catalina.core.StandardService start INFO: Starting service Catalina 2 Dec, 2010 10:06:29 AM org.apache.catalina.core.StandardEngine start INFO: Starting Servlet Engine: Apache Tomcat/6.0.20 2 Dec, 2010 10:06:30 AM org.apache.catalina.startup.HostConfig deployWAR INFO: Deploying web application archive myapp.war 2 Dec, 2010 10:06:32 AM org.apache.catalina.core.StandardContext start SEVERE: Error listenerStart 2 Dec, 2010 10:06:32 AM org.apache.catalina.core.StandardContext start SEVERE: Context [/myapp] startup failed due to previous errors 2 Dec, 2010 10:06:32 AM org.apache.coyote.http11.Http11Protocol start INFO: Starting Coyote HTTP/1.1 on http-8080 2 Dec, 2010 10:06:32 AM org.apache.catalina.startup.Catalina start INFO: Server startup in 3110 ms 2 Dec, 2010 10:06:39 AM org.apache.catalina.core.StandardContext start SEVERE: Error listenerStart 2 Dec, 2010 10:06:39 AM org.apache.catalina.core.StandardContext start SEVERE: Context [/myapp] startup failed due to previous error Any help?

  Read the article

• Page_BlockSubmit - reset it to False, if there is a scenario when page doesn't postback on validation error

  - by Vipin

  Recently, I was facing a problem where if there was a validation error, and if I changed the state of checkbox it won't postback on first attempt. But when I uncheck and check again , it postbacks on second attempt...this is some quirky behaviour in .ASP.Net platform. The solution was to reset Page_BlockSubmit flag to false and it works fine. The following explanation is from http://lionsden.co.il/codeden/?p=137&cpage=1#comment-143   Submit button on the page is a member of vgMain, so automatically it will only run the validation on that group. A solution is needed that will run validation on multiple groups and block the postback if needed. Solution Include the following function on the page: function DoValidation() { //validate the primary group var validated = Page_ClientValidate('vgPrimary ');   //if it is valid if (validated) { //valid the main group validated = Page_ClientValidate('vgMain'); }   //remove the flag to block the submit if it was raised Page_BlockSubmit = false;   //return the results return validated; } Call the above function from the submit button’s OnClientClick event. <asp:Button runat="server" ID="btnSubmit" CausesValidation="true" ValidationGroup="vgMain" Text="Next" OnClick="btnSubmit_Click" OnClientClick="return DoValidation();" /> What is Page_BlockSubmit When the user clicks on a button causing a full post back, after running Page_ClientValidate ASP.NET runs another built in function ValidatorCommonOnSubmit. Within Page_ClientValidate, Page_BlockSubmit is set based on the validation. The postback is then blocked in ValidatorCommonOnSubmit if Page_BlockSubmit is true. No matter what, at the end of the function Page_BlockSubmit is always reset back to false. If a page does a partial postback without running any validation and Page_BlockSubmit has not been reset to false, the partial postback will be blocked. In essence the above function, RunValidation, acts similar to ValidatorCommonOnSubmit. It runs the validation and then returns false to block the postback if needed. Since the built in postback is never run, we need to reset Page_BlockSubmit manually before returning the validation result.

  Read the article

• Apache: Virtual Host and .htacess for URL Rewriting not working

  - by parth

  I have configured virtual host in my local machine and every thing working fine . Now I want to use SEO friendly urls. To achive this I have used .htacess file . My virtual host configuration is : <VirtualHost *:80> DocumentRoot "C:/xampp/htdocs/ypp" ServerName ypp.com ServerAlias www.ypp.com ##ErrorLog "logs/dummy-host2.localhost-error.log" ##CustomLog "logs/dummy-host2.localhost-access.log" combined </VirtualHost> and my .htacess file has : AllowOverride All RewriteEngine On RewriteBase /ypp/ RewriteRule ^/browse$ /browse.php RewriteRule ^/browse/([a-z]+)$ /browse.php?cat=$1 RewriteRule ^/browse/([a-z]+)/([a-z]+)$ /browse.php?cat=$1&subcat=$2 The above .htacess setting is not working . After that I have modigied my virtual host setting and it is working . new virtual host setting is : <VirtualHost *:80> RewriteEngine On RewriteRule ^/browse$ /browse.php RewriteRule ^/browse/([a-z]+)$ /browse.php?cat=$1 RewriteRule ^/browse/([a-z]+)/([a-z]+)$ /browse.php?cat=$1&subcat=$2 ServerAdmin [email protected] DocumentRoot "C:/xampp/htdocs/ypp" ServerName ypp.com ServerAlias www.ypp.com ##ErrorLog "logs/dummy-host2.localhost-error.log" ##CustomLog "logs/dummy-host2.localhost-access.log" combined <Directory "C:/xampp/htdocs/ypp"> AllowOverride All </Directory> </VirtualHost> Please guide me where I am wrong in .htacess file for url rewriting . I donot want to use setting in virtual host because for every change I have restart apache .

  Read the article

• Macbook Pro 13" Retina (10,2): Keyboard and Touchpad don't work

  - by Dirk

  I'm dealing with Ubuntu since about 5 years and installed it on several laptops. Now I'm stuck when trying to install Ubuntu 12.04.1 on a brand new Macbook Pro 13" Retina (10,2). I sucessfully can start Ubuntu from an USB stick, the Ubuntu desktop is visible, a mouse cursor is visible. But there is no respond to keyboard or touchpad input. So I cannot really install Ubuntu on the Macbook. The details of my approach: Prepare an empty USB stick Download "ISO 2 USB EFI Booter for Mac" and copy the file bootX64.efi to the USB drive as /efi/boot/bootX64.efi. Download Ubuntu 12.04.1 Desktop for Mac from http://cdimage.ubuntu.com/releases/1-amd64+mac.iso and copy the iso the USB drive as /efi/boot/boot.iso Put the USB stick into the Macbook Press and hold the "alt" button while switching the Macbook on Select "EFI Boot" from the boot menu that appears and press the Return / Enter key Immediately a black terminal screen appears with the headline "Welcome to the Ubuntu ISO << - EFI booter". 30 seconds later the familiar Ubuntu startup graphics screen is showing. Further 20 seconds later Ubuntu has started and the desktop is visible - in wonderfully fine resolution Now the computer does not respond to any actions on the touchpad nor the keyboard Who did install Ubuntu on this Macbook Pro 13" Retina (10,2) successfully? On this site https://help.ubuntu.com/community/MacBookPro this unit is not listed yet, anyway. Any help would be greatly appreciated! Dirk

  Read the article

• Can't complete dropbox installation from behind proxy

  - by Mark Jones

  Problem: My PC on campus sits behind a proxy (requiring authentication) and I can't setup Dropbox. I am convinced that this is a proxy issue as I can't setup Ubuntu one either (but I don't use Ubuntu One so that is not a problem). I have looked at the Ubuntu One fix but it seems to be to modify settings explicitly related to Ubuntu One. I can install the nautilus-dropbox package (compiled from source and from .deb package from website and from software centre) but once I click OK from the "Dropbox Installation" dialog box (prompting me to download the proprietary daemon) the installation just freezes with the OK button pressed. When I look at its process in System Monitor its waiting channel is inet_wait_for_connect. I have set the following proxy directives thus far: Added mj22:**@proxy.waikato.ac.nz:80 information to network proxy settings under network in settings. Added http_host and http_port variables under gconf-editor-system-proxy Added 'host', 'authentication_password' 'authentication_user' and ticked 'user authentication' and 'use_http_proxy' under gconf-editor-system-http_proxy Added export http_proxy="http://mj22:**@proxy.waikato.ac.nz:80/" to /etc/bash.bashrc Added Acquire::http::proxy "http://mj22:**@proxy.waikato.ac.nz:80/"; to /etc/apt/apt.conf (which is what I imagine is letting Software Center retrieve packages). (where ** is my password) I have also added the equivalent ftp and https lines for the above entries. I get the internet fine and Software Centre can download packages but thats it. Related issues: The software centre can't fetch reviews (but can download packages). When trying to add an online account in Gnome 3 a dialog pop up appears with "Error getting a Request Token: Cannot connect to proxy (proxy.waikato.ac.nz)" Updates: After some time (10mins ish) Dropbox shows an error dialog box that reads: Trouble connecting to Dropbox servers. Maybe your internet connection is down, or you need to set you http_proxy environment variable. Is there a way I can see what environment variables are currently set?

  Read the article

• Windows 8&ndash;Custom WinRT components and WinJS

  - by Jonas Bush

  Wow, I’m still alive! I installed the RTM of Windows 8 when it became available, and in the last few days have started taking a look at writing a windows 8 app using HTML/JS, which in and of itself is a weird thing. I don’t think that windows developers of 10 years ago would’ve thought something like this would have ever come about. As I was working on this, I ran across a problem, found the solution, and thought I’d blog about it to try and kick start me back into blogging. I already answered my own question on Stack Overflow, but will explain here. I needed to create a custom WinRT component to do some stuff that I either wouldn’t be able to or didn’t know how to do with the javascript libraries available to me. I had a javascript class defined like this: WinJS.Namespace.define("MyApp", { MyClass: WinJS.Class.define(function() { //constructor function }, { /*instance members*/ }, { /*static members*/ }) }); This gives me an object I can access in javascript: var foo = new MyApp.MyClass(); I created my WinRT component like this: namespace MyApp { public sealed class SomeClass { public int SomeMethod() { return 42; } } }   With the thought that from my javascript, I’d be able to do this: var foo = new MyApp.MyClass(); var bar = new MyApp.SomeClass(); //from WinRT component foo.SomeProperty = bar.SomeMethod();   When I tried this, I got the following error when trying to construct MyApp.MyClass (the object defined in Javascript) 0x800a01bd - Javascript runtime error: Object doesn't support this action. I puzzled for a bit, then noticed while debugging that my “MyApp” namespace didn’t have anything in it other than the WinRT component. I changed my WinRT component to this: namespace MyAppUtils { public sealed class SomeClass { //etc } } And after this, everything was fine. So, lesson learned: If you’re using Javascript and create a custom WinRT component, make sure that the WinRT component is in a namespace all its own. Not sure why this happens, and if I find out why or if MS says something about this somewhere, I’ll come back and update this.

  Read the article

• Apache redirecting: reason unknown

  - by Sinan

  I have a simple php script. The script is not important. It just prints out $_SERVER. When I request an URL like www.server.com/?ref=bar everything is fine. However if the request contains something like www.server.com/?ref=http://www.test.com (?ref=http%3A%2F%2Fwww.test.com) the server redirects to 403.shtml. No redirect for http://x but redirects http://x.y As far as I can understand somehow the server doesn't like "http://x". It always redirects to 403.shtml when there is a valid query string in the form of a valid url. my .htacess file is the same both on my server and local test server and local test server behaves as expected (no redirects). So I don't it is related to .htaccess. I'm on shared host on Hostgator. Can anyone help? Edit: Here's the .htaccess file Options +FollowSymLinks RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php?$1 [L,QSA] When there is an http://xx.x it redirects to 403 even if there is physical file. However if I remove the .htaccess redirect to 403 also disappears. But I need the above .htaccess file. Is there a way to get around this?

  Read the article

• Websockets through Stunnel is giving random bytes.

  - by user16682

  I have several servers set up for a web application that I am developing. One is a load balancing server, and I'm running a php WebSockets server on this balancer. The website that I am developing on uses ssl, so I have my WebSockets running through a wss uri connecting directly to the balancer, where I have set up stunnel4 to decrypt all traffic at a certain port and re-rout it to my php WebSockets server. This works fine when it comes down to connecting to my server. That's not the problem. The problem occurs when I try to send data to the server. Occasionally when I try this, stunnel does not appear to be decrypting the data properly. I get garbage characters in my termanal running the server: what appear to be completely random bytes. This can sometimes go on for several consecutive messages that I send before abruptly working again. It is very erratic and unpredictable. Sometimes I refresh the page, and all the messages work perfectly. Sometimes the WebSocket connects and I have to wait 5-10 seconds before any messages I send are interpreted properly by the server. Other times I can't send any messages at all, because they all end up as garbage. I believe this is a stunnel problem, but I am not certain. Does anybody have any experience with this? I would like a more predictable server if I can get it. Some more information: This occurs extensively in Chrome, not quite as much in FireFox, and never in Safari. The php server I am using is phpws http://code.google.com/p/phpws/ -- On the WebSocket connection, this server would sometimes detect that the header was only 1 byte in size, the first byte of the WebSockets header. I had to modify the server to flush the buffer ever time this occurred so that it would reliably connect.

  Read the article

• korgac - init.d kill script on shutdown

  - by Max Magnus

  I'm new to Ubuntu 12.04 and Linux and my English is not the best, so I'm sorry for incorrect or stupid questions. I've installed KOrganizer and to start the reminder when I boot the system, I added the korgac command to the autostart. This works fine. But now, every time I want to reboot or shutdown my system, there appears a message that tells me that an unknown process is still running... so I have kill it manually before reboot/shutdown. I knew that it is the korgac process that causes this problem, so I decided to create an init.d script. I've created a script, put it into init.d, and created 2 symbolic links: to rc0.d and to rc6.d. The name starts with K10script... (I hope it is correct so). K10korgac_kill: #! /bin/sh pkill korgac exit 0 Unfortunately this wasn't able to resolve my problem. Maybe my script is wrong. I hope someone can help me. Thanks for your time Max

  Read the article

• Learning to be a good developer: what parts can you skip over?

  - by Andrew M

  I have set myself the goal of becoming a decent developer by this time next year. By this I mean full experience of the development 'lifecycle,' a few good apps/sites/webapps under my belt, and most importantly being able to work at a steady pace without getting sidelined for hours by some should-know-this-already technique. I'm not starting from scratch. I've written a lot of html/css, SQL, javascript, python and VB.net, and studied other languages like C and Java. I know about things like OOP, design patterns, TDD, complexity, computational linguistics, pointers/references, functional programming, and other academic/theoretical matters. It's just I can't say I've really done these things yet. So I want to get up to speed, and I want to know what things I can leave till a later date. For instance, studying algorithms and the maths behind them is interesting and all, but so far I've hardly needed to write anything but the most basic nested loops. Investigating Assembly to have a clearer picture of low-level operations would be cool... but I imagine rarely infringes on daily work. On the other hand, looking at a functional programming language might help me write programs that are more comprehensible and less prone to hidden failures (at the moment I'm finding the biggest difficulty is when the complexity of the app exceeds my capacity to understand it - for instance passing data around was fine... until I had to start doing it with AJAX, which was a painful step up). I could spend time working through case studies of design patterns, but I'm not sure how many of them get used in 'real life.' I'm a programmer with basic abilities - what skills should I focus on developing? (also my Unix skills are very weak, and also knowledge of Windows configuration... not sure how much time I should spend on that)

  Read the article

• Is there any reason not to go directly from client-side Javascript to a database?

  - by Chris Smith

  So, let's say I'm going to build a Stack Exchange clone and I decide to use something like CouchDB as my backend store. If I use their built-in authentication and database-level authorization, is there any reason not to allow the client-side Javascript to write directly to the publicly available CouchDB server? Since this is basically a CRUD application and the business logic consists of "Only the author can edit their post" I don't see much of a need to have a layer between the client-side stuff and the database. I would simply use validation on the CouchDB side to make sure someone isn't putting in garbage data and make sure that permissions are set properly so that users can only read their own _user data. The rendering would be done client-side by something like AngularJS. In essence you could just have a CouchDB server and a bunch of "static" pages and you're good to go. You wouldn't need any kind of server-side processing, just something that could serve up the HTML pages. Opening my database up to the world seems wrong, but in this scenario I can't think of why as long as permissions are set properly. It goes against my instinct as a web developer, but I can't think of a good reason. So, why is this a bad idea? EDIT: Looks like there is a similar discussion here: Writing Web "server less" applications EDIT: Awesome discussion so far, and I appreciate everyone's feedback! I feel like I should add a few generic assumptions instead of calling out CouchDB and AngularJS specifically. So let's assume that: The database can authenticate users directly from its hidden store All database communication would happen over SSL Data validation can (but maybe shouldn't?) be handled by the database The only authorization we care about other than admin functions is someone only being allowed to edit their own post We're perfectly fine with everyone being able to read all data (EXCEPT user records which may contain password hashes) Administrative functions would be restricted by database authorization No one can add themselves to an administrator role The database is relatively easy to scale There is little to no true business logic; this is a basic CRUD app

  Read the article

< Previous Page | 499 500 501 502 503 504 505 506 507 508 509 510  | Next Page >