Search Results

Search found 22599 results on 904 pages for 'google maps'.

Page 504/904 | < Previous Page | 500 501 502 503 504 505 506 507 508 509 510 511  | Next Page >

• Want to send my neighbors to a certain website via DNS, but don't have a clue how. [closed]

  - by Akku

  My neighbors have an unsecured WIFI router, and over the administration web-UI of the router I could log in as there was no password set. I don't know which of my neighbors these are, and I'd like to configure their router in a way that they come to my website instead of Google and Facebook, where I set up a warning in german. It this page: http://www.abelssoft.de/liebenachbarn/ Basically, I just want to see if and how this is possible - I'm aware that I could just set the WiFi-password and have them call their network provider to reset the thing, but I really want to see if this could work, because it would be a way cooler effect :-). So this router interface doesn't allow custom redirects, only filters. BUT I can set the DNS that is used, so I thought there might be the possibility to set up a custom DNS on a server, set it as the main DNS and redirect from Google to the URL above. Is this possible? If so, please try to detail a way that I have to go though to achive this. Note that I'm not the super-Linux-skilled person, I have a dyndns account and a Windows machine it points to as well as an Apache+Tomcat if that helps. I could also set up virtual machines on the windows server and redirect to those using a different port. Or is there maybe a webservice that provides such custom DNS?

  Read the article

• Routing / binding 128 IPs to one server

  - by Andrew

  I have a Ubuntu server with 128 ip's (static external ips 86.xx.xx.16), and I want to crawl pages thru different ip's. The gateway is xx.xxx.xxx.1, the main ip is xx.xxx.xxx.16, and the other 128 ip's are xx.xxx.xxx.129/255. I tried this configuration in /etc/network/interfaces but I doesn't work. It work if I remove the gateway for the aliases eth0:0 and eth0:1. I think this is routing problem. auto lo iface lo inet loopback auto eth0 auto eth0:0 auto eth0:1 iface eth0 inet static address xx.xxx.xxx.16 netmask 255.255.255.128 gateway xx.xxx.xxx.1 iface eth0:0 inet static address xx.xxx.xxx.129 netmask 255.255.255.128 gateway xx.xxx.xxx.1 iface eth0:1 inet static address xx.xxx.xxx.130 netmask 255.255.255.128 gateway xx.xxx.xxx.1 Also, please tell me how to "reset" every changes that I made in networking and routing. Update: I removed the gateway and now it works. I can reach the website thru all 128 ip's. But when I try to bind a socket connection in php to a specific ip I get no answer. socket_bind($sock, "xx.xxx.xx.xxx"); socket_connect($sock, 'google.com', 80); I tryed to use a sniffer to see the packets, and I see the packet sent from binded ip to google.com but the "connection" can't be established. I don't know anything about "route" command, but I have a feeling that this is the solution.

  Read the article

• Lion MacBook Pro will not load webpages with DNS just after wake

  - by NReilingh

  I'm working with a 2011 MacBook Pro running Lion (10.7.2), that after waking from sleep (i.e. opening the lid) takes an inordinately long amount of time (2-3 minutes or more) to get a usable internet connection. Upon waking, the wi-fi icon signifies it is negotiating a network connection, and completes one a few seconds later. At this point, network diagnostics will not show any issues, and everything in Network preferences looks as normal: I'm connected to the proper network, have the right IP address and gateway, and DNS settings are correct. However, any site accessed with a domain name (like http://www.google.com) in Safari will return the "You are not connected to the Internet." error. Accessing a site directly, say, with Google's 74.125.226.212, is successful. Yet, Network Diagnostics will insist that DNS is functioning properly. After a few minutes, the following lines will be printed to the Console log, and regular behavior will be restored. 11/18/11 8:11:31.288 PM airportd: _doAutoJoin: Already associated to “Wireless”. Bailing on auto-join. 11/18/11 8:11:32.000 PM kernel: en1: BSSID changed to 00:25:9c:63:91:bd This behavior occurs only when waking from sleep--not when turning wi-fi on and off. This problem also occurs when using a wired Ethernet connection. As per this thread, I have tried flushing the DNS cache and wiping the wireless network from memory (it's not a protected network). Neither have worked.

  Read the article

• Forward requests to IIS Application/Folder to Apache server on another port

  - by TheGwa

  I have found many questions and answers for ways of doing this using asapi filters or ARR and URL Rewrite, but none are clear and concise and I am sure many people have this issue. I am looking for a best practice step by step solution to the following scenario: I have a development server accessible externally via a specific port for testing. Eg. rnd.domain.com:8888. So there is one port in and out of this machine accessible to the world. On this server I have a number of Apache or other servers using specific ports such as 8080. IIS is bound to port 80 locally as well as 8888 to get external requests and works perfectly. I would like to use an application (folder) in IIS such as rnd.domain.com:8888/mapserver to map to the local apache server in both directions. The same solution must apply in production where the domain is mapped to port 80. eg. production.domain.com/mapserver maps to 8080 on production server

  Read the article

• Hard crash when using bluetooth headset on MacBook Pro and Lion 10.7.2

  - by jtalarico

  I recently picked up a bluetooth headset (Motorola S10-HD) and started using it with my MacBook Pro (17" purchased new in 2010) running Lion 10.7.2. Here's what works - stereo audio: iTunes Spotify Pandora (via browser) games (e.g. Minecraft, which is a Java app) audio from YouTube Plex, VLC, other video players Here's what doesn't work well - stereo audio fails and the headset seems to go into mono (i.e. tinny-as-hell) mode: Google Hangout Skype GoTo Meeting Here's what's just downright catastrophic. If I'm listening to stereo audio and then decide to jump into a Skype call (Google Hangout, or GoTo Meeting), bluetooth often crashes and I can only get things working again by shutting down the device, disabling bluetooth, and getting things back up and running again. But the audio is still horrible, and MUCH better using just a simple set of iPhone earbuds and mic. About 80% of the time during such a call, bluetooth crashes. And about 90% of the time, after the call ends, Skype is shut down, or I try to switch back to playing stereo audio, I get a hard crash!! The gray screen of death descends and I'm told I need to restart my machine. In one such instance, even after a reboot, I could not enable bluetooth again ("Turn Bluetooth On" was grayed out in taskbar). Is this just a weak implementation of bluetooth by Apple, or is this a hardware issue? I've seen others posting similar issues even on the Apple support site indicating that bluetooth headsets are failing left and right, but I haven't seen anyone mention hard crashes.

  Read the article

• Setup windows 2012 AD in Hyper-V for a Test environment

  - by hub

  Im trying to setup a Windos 2012 R2 test environment on my work computer (a laptop). I have a AD, DHCP and DNS server on server A, and a client connecting to the doman and that works. The client can ping the AD server and gets a valid IP adress. If I ping google.com from the client I get the IP adress but I dont get any responses (request time out). If i ping google.com from server A it works as it should. Server A have a connection to the Internet through a "external network switch" in hyper-v, which gets its internet from a router and the client is connected to a "internal network switch". May the poblem be that server A is behind a router? Can I make this solution to work regadless the network my laptop is connected to? At home i have one IP adress, at work its a totally different range. What I would like is to use my laptops internet connection, regardless wifi or wired, to act as incomming internet, is this possible?

  Read the article

• PCs on domain can not resolve external IP addresses using the DC's DNS Server

  - by Ben

  I currently have a domain controller which handles all DHCP and DNS. The DHCP works just fine and the domain controller itself can use the internet with no issues. However, PCs that are part of the domain are not able to use external websites, only internal. Does anyone have any way I can solve this issue? Thank you Server: Windows Server 2008 R2 PC: Win7 Enterprise x64 Edit: (domain controller) C:\Users\bcollyer>nslookup google.com Server: localhost Address: 127.0.0.1 Non-authoritative answer: Name: google.com Addresses: 2a00:1450:4009:809::100e 173.194.41.166 173.194.41.165 173.194.41.169 173.194.41.162 173.194.41.161 173.194.41.160 173.194.41.168 173.194.41.167 173.194.41.164 173.194.41.163 173.194.41.174 Edit 2: C:\Users\bcollyernetstat -rn Interface List 12...30 85 a9 f7 8a 21 ......Atheros AR8161/8165 PCI-E Gigabit Ethernet Control ler (NDIS 6.20) 1...........................Software Loopback Interface 1 13...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 11...00 00 00 00 00 00 00 e0 Microsoft Teredo Tunneling Adapter IPv4 Route Table Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.16.0.67 172.16.0.202 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 172.16.0.0 255.255.0.0 On-link 172.16.0.202 276 172.16.0.202 255.255.255.255 On-link 172.16.0.202 276 172.16.255.255 255.255.255.255 On-link 172.16.0.202 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.16.0.202 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.16.0.202 276 Persistent Routes: None IPv6 Route Table Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 1 306 ff00::/8 On-link Persistent Routes: None BTW I have no javascript on the server so can't reply to individual answers... Sorry!

  Read the article

• Tracking a subdomain serately within the main domain account [closed]

  - by Vinay

  I have a website, for example: xyz.com and info.xyz.com. I created a profile for xyz and tracking is good. I added a new profile for info.xyz.com in xyz.com. Analytics tracking for info.xyz.com is showing traffic from both xyz.com and info.xyz.com. How do I change to show only info.xyz traffic in the info.xyz.com profile. I used the following code: Analytics code for xyz.com domain: <script type="text/javascript"> var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-xxxxxx-x']); _gaq.push(['_trackPageview']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); </script> Analytics code for info.xyz.com <script type="text/javascript"> var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-xxxxxx-x']); _gaq.push(['_setDomainName', 'xyz.com']); _gaq.push(['_trackPageview']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); </script>

  Read the article

• Unable to access the server via SSH

  - by Rishee

  when I am trying to access the server through ssh it says: ssh: connect to host xx.yyy.zzz.x port 22: Connection refused and on the server in auth.log it shows following log entry: Address xx.yyy.zzz.x maps to xx.yyy.zzz.x.static-pune-vsnl.net.in, but this does not map back to the address - POSSIBLE BREAK-IN ATTEMPT! I have created a user account for that user and it is also in enabled status. Requested info It is Ubuntu 11.10 It is configured as SSH Server using openssh-server I am trying to connect to this server using Putty from Windows 7 i.e. My Desktop I have also asked this on AskUbuntu: http://askubuntu.com/questions/118556/unable-to-access-the-server-via-ssh

  Read the article

• Automatic o/s reset on a dedicated internet browsing Windows 7 pc.

  - by camelCase

  I have just purchased a new Acer Revo nettop PC for dedicated internet browsing. It will be the only pc on a home network. My original plan was to install one virtual PC for family browsing, another for remote web based server administration and ban browser use from the host Windows 7 o/s. The idea was that I could recover to a fresh VHD image once a week to eliminate any build up of malware inside the browser VMs. However now I am looking for alternative solutions since the Intel Atom cpu does not have hardware VT support which Windows Virtual PC requires. Would it be possible to engineer some type of routine overnight host o/s wipe and recovery? I guess cyber cafes do something like this? The only user data that would need to be retained across a recovery would be browser bookmarks but these could be exported to remote service. Edit 1: I am thinking the o/s reset could be done via some disk image recovery process. Edit 2: Just had a brainwave. Routine browsing could be done via the new Google Chrome O/S. I have just seen a video of the Google Chrome o/s booting off a usb pen drive in seconds.

  Read the article

• SBS2011 Standard DNS suddenly not resolving some domains

  - by Matt

  Suddenly today I am unable to resolve common domains like serverfault.com, facebook.com; but other domains like google.com, cnn.com work fine. This is on a client machine (Win7 Pro) connected to an SBS2011 Standard domain. The only DNS server is the SBS2011 server. The same domains work fine on all client PCs I have tried, and the same ones do not work. Using nslookup, I get 'no such domain' errors for facebook.com, and the correct DNS entries for the ones that do work. When I add Google's Public DNS to my client PC as a backup (primary = local SBS server, secondary = 8.8.8.8), everything works fine for my client PC, but querying from the SBS server directly or from other client PCs are broken (so I don't believe it's a firewall issue). My main question is how can I see what servers the SBS2011 server queries if it doesn't know about a domain? There is nothing in our firewall logs that say it blocked any DNS-based packets, but I also wanted to query based on the IP/FQDN on the servers that the SBS server was likely to contact to find out about facebook.com for example. Update 23/05/2012: It appears DNS is working again this morning for the affected websites. Both the DC on its own and all client PCs can once again access the websites that were not loading last night, as well as the websites that were working. I haven't changed anything overnight, so it appears that there was some kind of temporary glitch, but I can't understand what would have caused it on the network.

  Read the article

• free Raw-File Converter/Editor

  - by RCIX

  I have RAW files output by a program with a specific set of properties (Photoshop RAW, 16 bits, IBM PC byte order, no header, 1 non-interleaved channel, variable sizes like 257X257 or 129X513); does anyone know of a free tool that will allow me to convert to and from this format, and possibly do basic editing (selection, copy/paste, rotation of selection)? I've tried Picasa, XNView, and Paint Shop Pro 7 and none of them work properly. The closest i get is Paint Shop Pro which will at least make a serviceable attempt to open these files but i can't set all of the proper settings. XNView just might be able to edit it if i can figure out how to change the open settings for a particular raw file. So my questions at current are: how do i tell XNView to open a raw file a particular way? Failing that, is there any free tool that can open Photoshop-RAW files with the above settings (that's not photoshop)? If it helps, i'm trying to import/export/edit hieghtmap data for maps for Supreme Commander.

  Read the article

• Ubuntu server apt-get says "(-5 - No address associated with hostname)"

  - by Srini

  I have a ubuntu 12.04 server. Running sudo apt-get update on it produces errors like this: W: Failed to fetch http://au.archive.ubuntu.com/ubuntu/dists/precise-backports/main/binary-i386/Packages Something wicked happened resolving 'au.archive.ubuntu.com:http' (-5 - No address associated with hostname) I am able to ping all the other hosts on the network and also Google's DNS 8.8.8.8. But am unable to ping www.google.com. So, I'm guessing something is wrong with my DNS setup, but not sure what. I use static IP and my /etc/network/interfaces looks like this: auto eth0 iface eth0 inet static address 192.168.1.50 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.0.255 gateway 192.168.1.1 #dns-nameserver 203.12.160.35 203.12.160.36 #nameserver 203.12.160.35 203.12.160.36 My /etc/resolv.conf and /etc/resolvconf/resolv.conf.d/base are both empty and my /etc/resolvconf/resolv.conf.d/original says: nameserver 192.168.1.1 Any help would be greatly appreciated. P.S. I've googled it a bit and the common resolution is to switch to DHCP which I don't want to do since this is my home server. Thanks Srini

  Read the article

• Server resolve issues not consistent

  - by bobthemac

  I am having some weird issues with my web server. It has a public ip address and is set-up on an openVZ virtual machine. Accessing in to the site works fine every time but when trying to access out from the server I can't always connect out. Sometimes I can connect out and resolve addresses, sometimes I can't. The issue is visible in both ssh when trying to do a wget command on Google; sometimes it works and I get the index.html page and sometimes I get nothing. The issue is more visible in wordpress where you can't view themes but after a few presses of the try again button you can then view them. I have searched google and found nothing about this issue. Does anyone here have any ideas what could be causing this strange behaviour? Ports 80 and 2222 are open for web and ssh. Failed 17:26:33.398412 IP 86.148.184.124.38445 > 176.9.36.252.http: Flags [.], ack 98383, win 632, options [nop,nop,TS val 3070086 ecr 323106946], length 0 [email protected]..|. $..-.P..,.e......x....... .....B8. Passed 17:30:00.179630 IP 146.90.206.241.50091 > 176.9.36.252.http: Flags [F.], seq 1, ack 1, win 115, options [nop,nop,TS val 13740559 ecr 323308537], length 0 [email protected]... $....P.w...x.....s(K..... .....EK. Thanks in advance

  Read the article

• Server side url scanner for malware, spyware , viruses and protect my visitors

  - by Vangel

  I have a forum/groups site that contains a lot of external URLs, sometimes direct download links. I want to protect my visitors from possible attacks from malware sites as they are mot likely to click on these links. CUrrently I implement DBL (spamhaus) but thats not enough. I want to run a background task to check the outgoing links first. I have looked at similar questions in StackOverflow (wrongly posted there) and here but fail to find a question same as mine or a good answer. People have suggested ClamAV , I don't believe it can detect Web hosted malware sites and its has a lot of missed detection. I have looked at google safe browsing service ( http://code.google.com/apis/safebrowsing/developers_guide_v2.html very complicated to implement or maintain plus midway I get lost :S ) I can go for commercial solution, anything to protect the visitors and my site brand. But I would like to hear the opinion of server admins and if anyone has implemented such a service. My Server is basic CentOS LAMP stack. thank you very much in advance.

  Read the article

• Active Directory: Find out which users belong to a Group Policy Object

  - by gentlesea

  Hi, I want to make sure that certain users are available in a group from the windows domain. I installed "Group Policy Management" and can open the Forest, the Domain. But then I am not sure what I am searching. I can select a link to a Group Policy Object (GPO). In Settings i see the Drive Maps and I know them. But how can I display a list of users that use this GPO? Right-click, Edit... is disabled. net group my_gpo does not work since I am not on a Windows Domain Controller. Any possibility to find out anyway?

  Read the article

• OpenVPN + iptables / NAT routing

  - by Mikeage

  Hi, I'm trying to set up an OpenVPN VPN, which will carry some (but not all) traffic from the clients to the internet via the OpenVPN server. My OpenVPN server has a public IP on eth0, and is using tap0 to create a local network, 192.168.2.x. I have a client which connects from local IP 192.168.1.101 and gets VPN IP 192.168.2.3. On the server, I ran: iptables -A INPUT -i tap+ -j ACCEPT iptables -A FORWARD -i tap+ -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.2.0/24 -o eth0 -j MASQUERADE On the client, the default remains to route via 192.168.1.1. In order to point it to 192.168.2.1 for HTTP, I ran ip rule add fwmark 0x50 table 200 ip route add table 200 default via 192.168.2.1 iptables -t mangle -A OUTPUT -j MARK -p tcp --dport 80 --set-mark 80 Now, if I try accessing a website on the client (say, wget google.com), it just hangs there. On the server, I can see $ sudo tcpdump -n -i tap0 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on tap0, link-type EN10MB (Ethernet), capture size 96 bytes 05:39:07.928358 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 558838 0,nop,wscale 5> 05:39:10.751921 IP 192.168.1.101.34941 > 74.125.67.100.80: S 4254520618:4254520618(0) win 5840 <mss 1334,sackOK,timestamp 559588 0,nop,wscale 5> Where 74.125.67.100 is the IP it gets for google.com . Why isn't the MASQUERADE working? More precisely, I see that the source showing up as 192.168.1.101 -- shouldn't there be something to indicate that it came from the VPN? Edit: Some routes [from the client] $ ip route show table main 192.168.2.0/24 dev tap0 proto kernel scope link src 192.168.2.4 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.101 metric 2 169.254.0.0/16 dev wlan0 scope link metric 1000 default via 192.168.1.1 dev wlan0 proto static $ ip route show table 200 default via 192.168.2.1 dev tap0

  Read the article

• Exchange emails not delivering for one user

  - by Cylindric

  We have an Exchange infrastructure going through a migration from 2003 SP2 (call it ExOld) to 2010 (ExNew). All users are now on the new server, but mail is still being directed to ExOld until testing is complete. ExNew sends emails directly to the internet. For one particular user, emails don't seem to be being reliably delivered, but the odd thing is that it's not all emails. I can see external emails in his inbox. If I send an internal email it works fine. If I send an email from Gmail to him it doesn't get through. If I telnet from outside to ExOld I can send an email to him. If I telnet from outside to ExNew I can send an email to him. This is a transcript that results in a successful send: 220 ExOldName Microsoft ESMTP MAIL Service, Version: 6.0.3790.4675 ready at Mon, 22 Oct 2012 10:55:26 +0100 EHLO test.com 500 5.3.3 Unrecognized command EHLO test.com 250-ExOldFQDN Hello [MyTestExternalIp] 250-TURN 250-SIZE 250-ETRN 250-PIPELINING 250-DSN 250-ENHANCEDSTATUSCODES 250-8bitmime 250-BINARYMIME 250-CHUNKING 250-VRFY 250-X-EXPS GSSAPI NTLM LOGIN 250-X-EXPS=LOGIN 250-AUTH GSSAPI NTLM LOGIN 250-AUTH=LOGIN 250-X-LINK2STATE 250-XEXCH50 250 OK MAIL FROM:[email protected] 250 2.1.0 [email protected] OK RCPT TO:[email protected] notify=success,failure 250 2.1.5 [email protected] DATA 354 Start mail input; end with . Subject:Test 1056 Test 10:56 . 250 2.6.0 Queued mail for delivery quit 221 2.0.0 ExOldFQDN Service closing transmission channel Emails go through Symantec Cloud, but their "Track and Trace" shows the messages going through, with a "delivered ok" log entry. 2012-10-22 09:19:56 Connection from: 209.85.212.171 (mail-wi0-f171.google.com) 2012-10-22 09:19:56 Sending server HELO string:mail-wi0-f171.google.com 2012-10-22 09:19:56 Message id:CAE5-_4hzGpY2kXFbzxu7gzEUSj5BAvi+BB5q1Gjb6UUOXOWT3g@mail.gmail.com 2012-10-22 09:19:56 Message reference: 135089759500000177171130001194006 2012-10-22 09:19:56 Sender: [email protected] 2012-10-22 09:19:56 Recipient: [email protected] 2012-10-22 09:20:26 SMTP Status: OK 2012-10-22 09:19:56 Delivery attempt #1 (final) 2012-10-22 09:19:56 Recipient server: ExOldIP (ExOldIP) 2012-10-22 09:19:56 Response: 250 2.6.0 Queued mail for delivery I'm not sure where to look on the old (or new) server for information as to where the mails are ending up.

  Read the article

• Windows 2008 - Define IP Order by port or service

  - by Josh

  I have a Windows 2008 server that has three IP bound to the NIC. I can select which IP Windows SMTP listens to, but I want to also set the IP address used when mail is sent. Where would I set which outbound IP to use when sending email? Without using real IPs, here is an example what I have setup. Three IPs associated with the server: 10.0.0.1 10.0.0.2 10.0.0.3 I setup the binding on 10.0.0.2 for port 25 in the SMTP server settings, so that it is the only IP that will respond for inbound. When I look at the email header from an email sent from that server, it lists the server with an address of 10.0.0.3. I would like it to use 10.0.0.2 so that when reverse DNS is performed, it maps back correctly.

  Read the article

• Vim quit insert mode when navigate with mapping keys

  - by zdd

  In order to move the cursor in insert mode, I add the following key maps in my .vimrc(I use vim 7.3 on Sun OS) inoremap <Alt-h> <Left> inoremap <Alt-j> <Down> inoremap <Alt-k> <Up> inoremap <Alt-l> <Right> When I press the mapping keys, the cursor moves correct, but vim will quit insert mode and switch to normal mode, what's wrong with my vim? I also tried this with my gvim on Windows, it works well. Did I lost any options for the mapping keys?

  Read the article

• Drowning in documents - recommend doc management solutions?

  - by Martin Day

  I've been researching document management lately. I want to organise my docs at home and also at the office. Finding affordable solutions one can actually test drive is quite hard. Some that I've downloaded just don't seem to work (testing on brand new Vista PC). I've seen some software on Amazon like Paperport but not really sure what they're like. For home I'd like something to organise files, full text search, good scanner integration, nice interface etc. But for the office it seems harder. I need something that does proper workflow and keeps versions. It will have an audit trail. Documents can be approved, checked in/out etc. I know a few clients who would like something similar. It would be great just to import thousands of documents from a shared drive and get them indexed with dupes killed. I'd like to be super clear about how/where the documents are being stored so that maintenance and backups are clear. My Google/twitter searches lead back to the same tired and vague webpages pushing what look like expensive and custom made solutions. Some might be very good I suppose but it's darn hard to tell. I don't mind a hosted package but all in all I don't think something like Google Docs, as good as it is now, will work. There are too many quirks and missing features (as compared to Office). Being able to work directly with the common Office file formats is important. I've noted a similar sounding question asked here back in August but it didn't seem to turn up too many solutions that I could easily and quickly apply. Also there could have been some changes since then so I feel it's worth asking.

  Read the article

• Gmail: Received an email intended for another person. [closed]

  - by jonescb

  I'm not really sure how email routing works, but someone ordered something on Amazon and I received the email instead of them. Or maybe we both got it, I don't know. The order doesn't show up in my account, so I'm certain I wasn't charged for it, but I shouldn't be getting other peoples' emails. We'll say that my email is [email protected], and somebody who's email is [email protected] places an order on Amazon. The confirmation email is sent to me at [email protected]. I checked the email header, and it did say To: [email protected] which is not my email address. At first I thought that Google ignores periods in email addresses, but I tested the account setup and it doesn't give any error when you put a period in the address. I didn't create the account; I just used the "check availability" function and the address I chose with a period was fine. Maybe someone with knowledge about how Email works could tell me why this happened. Is this a bug in the way Amazon sends emails? Or is it a bug in how Google receives them? Who should I report this issue to?

  Read the article

• Cisco configuration for public library internet

  - by AlternateZ

  I'm a C/C++ computer programmer turned IT support guy working for a public library. My day is usually spent helping random grandparents learn how to use email, so my networking knowledge is limited to what I can glean from google. Here's the situation. We have a public library with 20 PCs on a LAN and also public wifi access. Previously we were running all of this on 1 ADSL connection and people complained about low speeds. We hired a networking company to set up a Cisco dual-WAN router for us, and purchased an additional ADSL connection. The intention was to give the LAN PCs a guaranteed amount of bandwidth each, and then let the wifi users split the rest. The results were far worse than what we expected, and all we got from the company was excuses and they've since washed their hands of us. During busy periods, net performance on the LAN PCs are so poor that attaching files to gmail etc often times out and fails - far from the "guaranteed amount of bandwidth each" that we hope for! Sometimes it feels like performance is worse than before when we had 1 ADSL link and an unconfigured router? Anyways, surely this is a problem encountered a million times over across the world? (Sharing internet across many users effectively.) What are standard solutions for something like this? I admit to not even knowing the right jargon to google for (load balancing?) I'd appreciate any links to resources/guides that might help me get a better understanding of the problem/solutions, and perhaps some stories of your own experience in solving similar problems. This will help us evaluate and negotiate with network consultants in the future. If its relevant, our router config contains a section "policy-map" with "bandwidth percent" for each class of user (LAN, wifi), and "fair queue".

  Read the article

• Cygwin file and directory user and group

  - by dvanaria

  I use Cygwin as my main development environment on both my home and work computers. In order to share files between the two computers, I use Dropbox, which is installed in the following folder on both computers: c:\cygwin\home\dvanaria\dropbox Everything works great, except for one thing. When I'm working on my home computer and do an ls -l on any directory, all the files show up as owned by dvanaria of group Users. But when I work from my work computer, an ls -l shows all files as being owned by Administrators and of group Domain Users. I know Cygwin uses some kind of mapping between Windows users and permissions to the /etc/passwd file. But to be honest I have no idea how this file works or how it maps to Windows under Cygwin. Could anyone help figure this out? The main problem is that I can't edit any files when using my work computer, only read them.

  Read the article

• TCP dies on a Linux laptop

  - by Roman Cheplyaka

  Once in several days I have the following problem. My laptop (Debian GNU/Linux testing) suddenly becomes unable to work with TCP connections to the internet. The following things continue to work fine: UDP (DNS), ICMP (ping) — I get instant response TCP connections to other machines in the local network (e.g. I can ssh to a neighbour laptop) everything is ok for other machines in my LAN But when I try TCP connections from my laptop, they time out (no response to SYN packets). Here's a typical curl output: % curl -v google.com * About to connect() to google.com port 80 (#0) * Trying 173.194.39.105... * Connection timed out * Trying 173.194.39.110... * Connection timed out * Trying 173.194.39.97... * Connection timed out * Trying 173.194.39.102... * Timeout * Trying 173.194.39.98... * Timeout * Trying 173.194.39.96... * Timeout * Trying 173.194.39.103... * Timeout * Trying 173.194.39.99... * Timeout * Trying 173.194.39.101... * Timeout * Trying 173.194.39.104... * Timeout * Trying 173.194.39.100... * Timeout * Trying 2a00:1450:400d:803::1009... * Failed to connect to 2a00:1450:400d:803::1009: Network is unreachable * Success * couldn't connect to host * Closing connection #0 curl: (7) Failed to connect to 2a00:1450:400d:803::1009: Network is unreachable Restarting the connection and/or reloading the network card kernel module doesn't help. The only thing that helps is reboot. Clearly something is wrong with my system (everything else works fine), but I have no idea what exactly. I don't know how to reproduce this, but as I said, it happens every several days. My setup is a wireless router that is connected to the ISP via PPPoE. Any advice?

  Read the article

< Previous Page | 500 501 502 503 504 505 506 507 508 509 510 511  | Next Page >