Search Results

Search found 29876 results on 1196 pages for 'ubuntu 8 04 lts'.

Page 504/1196 | < Previous Page | 500 501 502 503 504 505 506 507 508 509 510 511  | Next Page >

  • Can no longer boot with rEFIt and Grub on early 2006 MacBook Pro

    - by Don Quixote
    I don't know what happened to cause this. I have Snow Leopard, Ubuntu 11.04 Natty Narwhal and Windows XP SP3 on my early 2006 MacBook Pro. It is a Core Duo unit, NOT Core 2 Duo, so it is 32-bit only - Model Identifier MacBookPro1,1. I use rEFIt 0.14 for my boot menu. For some reason neither XP nor Ubuntu would boot anymore. I'd just get a black screen with a rapidly flashing underscore in the top-left corner. Having both those OSes failing to boot suggested a problem with the boot loader in my MBR. The rEFIT partition tool verified that my MBR partitions were still synced with my GPT partitions, so I rewrote my MBR partition table with fdisk while booted from Parted Magic: # fdisk /dev/sda (fdisk warns about the disk having a GPT. I press on anyway.) p (Print the existing partition table to make sure it's OK.) w (Write the old partition table back to disk. This also writes a new MBR boot loader.) After this XP would boot but Ubuntu would not, with the same symptom. Now I used update-grub while chrooted into Ubuntu from Parted Magic: # mount /dev/sda3 /mnt # mount --bind /dev /mnt/dev # mount --bind /sys /mnt/sys # mount --bind /proc /mnt/proc # chroot /mnt Chroot issues some warnings about not being able to identify some group IDs. I don't know why that happens, or whether it is a problem. At this point while I am still booted off of Parted Magic's kernel, I am running from Natty's filesystem. # update-grub Update-grub detects each of my operating systems then claims to complete successfully, but still won't boot. I asked this same question over at rEFIt's Sourceforge support forum but there have been no replies yet. I also Googled quite a bit, and see many who have the same black screen problem, but none of their situations seem quite like mine. Thanks for any help you can give me. -- Don Quixote

    Read the article

  • double-click does not open the default program

    - by Chang
    I installed Ubuntu 12.04, with texlive-full and texworks. When I double-click a .tex file in Nautilus, it pops up a Do you want to run "xxxxxxxx.tex", or display it contents? "xxxxxxxx.tex" is an executable text file. Run in Terminal Display Cancel Run If I choose Display, it opens texworks. How can I make it open without seeing the above conversation window? By the way, is .tex file indeed an executable file? ADDED Just for the case, my ~/.local/share/applications/mimeapps.list file looks like the following: [Default Applications] text/html=google-chrome.desktop x-scheme-handler/http=google-chrome.desktop x-scheme-handler/https=google-chrome.desktop x-scheme-handler/about=google-chrome.desktop x-scheme-handler/unknown=google-chrome.desktop text/x-tex=texworks.desktop x-scheme-handler/mailto=google-chrome.desktop [Added Associations] text/x-tex=texworks.desktop; text/x-bibtex=jabref.desktop;gedit.desktop; I observe texworks are both up and down. Should I remove one? ADDED This does not happen with all .tex files. In fact, I am currently using Ubuntu 12.04 under Virtual Box with Windows 7 host. I have my Dropbox account synced with the Windows 7 host, and I access files in Dropbox in Ubuntu through Virtual Box's shared folder functionality. (I didn't install Dropbox client in Ubuntu.) Files in Dropbox are owned by root with group vboxsf. My personal account is in the group vboxsf. It seems that I have to uncheck the option for "executable", but I have all my .tex files in the Dropbox shared folder. Would there be any workaround?

    Read the article

  • How to get Unity working on dual gpu laptop?

    - by Mourgos
    I recently bought a new laptop (Asus X53S series) that has two GPUs, an NVidia GeForce GT 540M and an integrated Intel GPU (I believe it's called Intel HD graphics 3000). I installed the recommended restricted NVidia drivers after a clean Ubuntu 11.10 install. In the 'additional drivers' program I get the message: "This driver is enabled and in use", although when I try to open the NVidia X Server Settings it says "You do not appear to be using the NVIDIA X driver." which seems to be the case since Ubuntu only starts using Unity 2D. I've had the same issue in 11.04 and I was forced to use the nouveau driver just to get unity working, but since I get quite a few crashes with it I really want to get the propriety driver working this time around. Since I've never had this issue with older laptops, I can only assume it is caused due to the dual gpu configuration. How do I get Ubuntu to use the propriety drivers, or is there any workaround to get the integrated Intel GPU to be ignored by Ubuntu? Alternatively, has anyone got Unity working with a similar setup?

    Read the article

  • 'Xojo' is the only application that I can't install

    - by Gichan
    I can't install xojo. When I click install in the software center it's not progressing. In the terminal it's stuck in : gichan02@gichan02-Latitude-D520:~$ sudo apt-get install xojo [sudo] password for gichan02: Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: xojo-bin The following NEW packages will be installed: xojo xojo-bin 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 209 MB/209 MB of archives. After this operation, 596 MB of additional disk space will be used. Do you want to continue? [Y/n] Y 0% [Working] then after waiting for an hour for progress it says: Failed to fetch https://private-ppa.launchpad.net/commercial-ppa-uploaders/xojo/ubuntu/pool/main/x/xojo/xojo-bin_2013.41-0ubuntu1_i386.deb Could not resolve host: private-ppa.launchpad.net So I added apt repository for 'private-ppa': deb https://ging-giana:[email protected]/commercial-ppa-uploaders/xojo/ubuntu trusty main Then when I try 'apt-get update': GPG error: https://private-ppa.launchpad.net trusty Release: The following signatures were invalid: NODATA 2 Then I noticed something the Software Sources:Other software TAB: Added by software-center; credentials stored in /etc/apt/auth.conf https://private-ppa.launchpad.net/commercial-ppa-uploaders/xojo/ubuntu So i go to the '/etc/apt/auth.conf' ,but It cannot be opened and it is not a keyserver. So i uncheck: Added by software-center; credentials stored in /etc/apt/auth.conf https://private-ppa.launchpad.net/commercial-ppa-uploaders/xojo/ubuntu GPG error was gone. But then again I found myself at the beginning of the problem.STUCK at '0% [Working]'. 'Xojo' is the only application that I can't install.Any explanation why is it like that?

    Read the article

  • Brightness is reset to Maximum on every Restart

    - by Bhargav
    The brightness of my laptop is reset to Max on every restart. I tried the solution provided at this website but had no luck. http://ubuntuguide.net/how-to-save-screen-brightness-settings-in-ubuntu-12-04-laptop/ This command cat /sys/class/backlight/acpi_video0/max_brightness Returns cat: /sys/class/backlight/acpi_video0/max_brightness: No such file or directory Then I go on to find that I don't have any folder named acpi_video0 but a folder called intel_backlight Every time I increase or decrease the brightness using the Brightness Control Keys the "brightness" and the "actual_brightness" values get updated. Is there any method I could follow to set the brightness to a fixed value on everyboot and vary it as and when I need it using the Brightness Control Keys.

    Read the article

  • Chainloading GRUB2 from BURG

    - by WindowsEscapist
    I have an old PC with Puppy Linux in addition to Ubuntu and Windows XP. THis creates a LOT of menu entries (all of which I would like to keep): Ubuntu 10.04 Ubuntu Recovery Mode Memtest x86 Memtest Serial Windows XP Pro Precise Puppy Linux Precise Puppy TORAM Puppy 4.3.1 Puppy 4.3.1 TORAM Plop Boot Manager (for booting to USB, PC doesn't have BIOS option). Now, in my fancy shiny laptop I've gotten really attached to BURG, and would like a setup where I have a Windows icon, an Ubuntu icon, and an arrow that chainloads GRUB2 so that I can boot from USB or run Puppy if need be (all these entries will obviously not fit into the BURG theme I use, Lightness). The problem is, GRUB2 can't install the the beginning of a partition like it used to be able to (I am reluctant to specify andything with --force at the end), at least, without warning that warn: This is a BAD idea!. So I'm kind of at a loss here. I can't see how the folding option would work, because all of those other options would have the same icon once I unfolded (Lightness is non-text-based). If I do embed GRUB using grub-install /dev/sdax --force, how do I chainload it with BURG? Is there another way?

    Read the article

  • E: unable to locate package firmware-b43-installer when i

    - by Raju
    I am using Acer aspire-5002wlmi laptop and set up a dual boot with Windows XP and Ubuntu 12.04. Wifi is well working in XP but when I start Ubuntu I will get the below error. [ 95.514855] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all the instruction on this website. then I followed the instructions from the below link file:///C:/Documents%20and%20Settings/MGL/Desktop/how%20to%20install%20ubuntu/Ubuntu%2012.04%20Splash%20Screen%20Lockup%20with%20LiveCD%20_%20Ben%20Rousch%27s%20Cluster%20of%20Bleep.htm but I am stuck in installing the Broadcom Wifi firmware in terminal and it is showing this error: E: unable to locate package firmware-b43-installer

    Read the article

  • Accessing second hard drive

    - by Jonathan
    Hi, So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris

    Read the article

  • System in low-graphics mode

    - by Artem Moskalev
    I am totally new to Linux, and Ubuntu. I bought ASUS X53E Notebook, erased Windows and installed Ubuntu. First it worked ok. Then when I started working with it, i opened the terminal, entered sudo chmod 666 usr and then all the icons from the main panel disappeared + the whole system stopped responding. I decided to restart the system. When restarted, a message appears: the system is running in low graphics mode and below it: Your screen, graphics card and input device setting could not be detected correctly. You will need to configure it yourself. But the "OK" button is disabled and if I press any buttons nothing happens. If I enter Ctrl-Alt-F2 it opens the bash terminal. But there commands sudo or apt-get are not found and it says that permission denied if i try to enter any folder like cd /usr If I enter the su command it asks for the password I don't know. When encountering this problem first, I reinstalled the whole Ubuntu. but today it happened again just the same. What shall I do? maybe there is something wrong with the hardware? If I need to install another distribution of Linux could you recommend one? but I'd rather stick to Debian releases like Ubuntu. so how do I fix the problem? PS: Please give answers in simple terms because am a newbie so i don't know what goes where yet.

    Read the article

  • after i typed in my username then it just quit the window and do nothing

    - by Bosco S. Chan
    I have a vaio VGN-FJ270P/B laptop which originally installed a windows xp professional in it. Last week, i had enough about the speed of windows and bought a brand new fresh SSD [M5S 128GB] and 2 new RAMS [1GB x2]. And i used my desktop to install a LiveUSB and downloaded the latest ubuntu and installed it [Universal USB Installer + Ubuntu 12.04.1]. All seems find through partition and typing my username and password. just after i typed in my password, i pressed continue and then it pop-up the window about choosing the profile picture for my account and it immediately disappear and went doing nothing. What's happening with it? any help would be appreciate...! Thanks!! Bosco

    Read the article

  • What is the safest way to remove a swap partition?

    - by user212062
    I am running Ubuntu 12.04 on a 64-bit HP laptop with a 16 GB flash drive. I do not have a working hard drive right now. When I installed Ubuntu, I created a 2 GB swap partition on sdb1. I have since learned that swap partitions are generally a bad idea on flash drives, so I would like to use my swap space for my other partitions. You can see my partition scheme in the link below. I have read that I just have to comment sdb1 out of the fstab file, boot from a GParted live CD, select swapoff for sdb1, delete/merge with other partition, and everything's good. But, I've also read that messing with sdb1 can change the UUID of sdb2 or sdb3 and cause problems. Is this true? Does initramfs use swap at all? Also, when I get Ubuntu running on my laptop with an internal hard drive, does the swap partition help that much? I have 6 GB of DDR3. Does the rule of 1.5xActual RAM still apply? It seems like quite a bit to me. Thanks for the help! UPDATE: I have removed swap. The process I followed is: Right click swap partition in GParted and selected swapoff. Used # to comment the swap partition out of fstab. I tried to boot from a live GParted CD, but I kept getting an error, so I ran GParted in Ubuntu. Deleted swap partition in GParted. Unmounted /windows. Expanded /windows to take the remaining space. Mounted /windows. The / and /windows partitions each kept their own names and UUIDs, and everything is running fine. I have never seen any swap space being used before, and I don't intend to use the hibernate function, so I think removing swap was a good idea.

    Read the article

  • Wireless not working with an Atheros AR9285

    - by Neeraj
    I recently installed Ubuntu 12.04 and found my wireless card is not detected by OS. I tired to detect it by network manager but still it is not get output of the required command: toor@Linux:~$ sudo lshw -class network *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: c0 serial: f0:de:f1:9e:22:4d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=124.123.227.84 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:44 memory:f2400000-f243ffff ioport:2000(size=128) *-network UNCLAIMED description: Network controller product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f2500000-f250ffff and toor@Linux:~$ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: yes Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: yes Hard blocked: no Please let me know what more info is required to resolve it.

    Read the article

  • New Dell Vostro 3550 will not boot into Live CD

    - by rich97
    I've been trying to install Ubuntu and/or it's derivatives on my new Dell Vostro 3550 but I'm finding it impossible to boot into the live CD environment. Here are the things I've already tried: Booting from multiple versions of multiple distributions (Ubuntu 10.10, Ubuntu 11.04, Mint 11, Mint 10) Booting from a Live USB created with unetbootin, the Linux Mint startup disk creator, the universal USB creator and dd of=linuxmint.***.iso if if=/dev/sdx. Burning a CD and booting from the internal CD drive. In the case of the USB keys with the latest versions of Ubuntu it gets to the page where I can select a boot option, but after selecting an option the screen goes black, even the back light turns off. With the older distributions the screen stays on but it starts loading and then just hangs. The CDs don't even try to boot. It starts spinning but then falls back to the default Windows install. The only way I've got it to work so far is with Wubi, but that's hardly ideal. I'd like to have two separate physical partitions with a /home and /. Any help is appreciated. Thank you.

    Read the article

  • How to set up bridged networking in Xen?

    - by Joe Carr
    I have 2 domU virtual machines installed on a 11.10 Oneiric Dom0. My internal network is on the 192.168.1 subnet, and when the domU's start, they get ips on the 192.168.122 subnet. I have attempted to follow the instructions here : http://wiki.kartbuilding.net/index.php/Xen_Networking xend-config.sxp is configured correctly, but neither of my domU's have a config file in /etc/xen to modify. ifconfig reports that I have the following devices : eth0, lo, tap3.0, vif3.0, vif4.0, virbr0 bridge-utils is installed. I also just attempted to follow these steps : http://serverfault.com/questions/233201/bringing-the-xenbr0-interface-up-on-xen-under-ubuntu-8-04 sudo brctl addbr xenbr0 sudo brctl addif xenbr0 vif3.0 device vif3.0 is already a member of a bridge; can't enslave it to bridge xenbr0. Any ideas on next steps are greatly appreciated!

    Read the article

  • Can't change settings for Mobile Broadband Dongle - Button is greyed out

    - by Ross LIndsey
    I was with VirginBroadband.com.au (Australia). My huawai 3G Dongle was working great on Ubuntu, However I have changed ISP's. I unlocked the modem, and put in the new SIM. I have tested this in my Windows PC and it connects to the new (Optus) Network A-OK and it all works. When I put this dongle (the same one that was working fine in Ubuntu) into that same Ubuntu Netbook it simply won't connect. When I try to go into the dialog to try and add or change settings the button to change or update settings is greyed out, I can't select it. Apparently since this dongle was already recognized the Broadband Setup Wizard won't start, and I have no idea how to get it to start (presuming it has the ability to configure an already recognized dongle). What do I have to do to either enable the ability to change the configuration for this setup, or to blow away the one that is set up so the Broadband Wizard will re-start and let me configure a new one. Can anyone provide simple instructions for doing this? I'm using Ubuntu with the Cinnamon Desktop

    Read the article

  • MPD to play music to single channel of my multi-channel card?

    - by hany tawfik
    I installed an Ubuntu 12-04 LTS server for a special background music application of mine, where I am using the server with an Asus Xonar DS sound card. The installation is successful, the MPD is working, the sound card is working with Alsa and its libraries installed accept for Alsa-oss. Alsamixer is working fine with left/right sides of each channel volume control through Q/Z letters shortcut when alsamixer is open in terminal . using the command " speaker-test -Dplug:surround71 -c8 -l1 -twav " I can hear every voice message coming out from the card at the right connector, so "front right/ front left" voice message are coming from first output in the card back, while the other outputs are silent..so on. The problem is that MPD is playing on all outputs simultaneously the same audio. I have been trying various configurations for the last 12 days with out any success, including trying to put mappings in the /etc/asound.conf Can any body help me achieve the above, or direct me to the right configuration of MPD or asound.conf

    Read the article

  • Change X settings to boot into laptop with non working screen using an external monitor

    - by dassouki
    My laptop committed suicide. Is there a way I can boot into my ubuntu using an external screen? Ubuntu 10.10 video: Nvidia 9500 gm i think I can get dual screen upto and until the ubuntu login screen at which point it goes back into laptop display only. Then I can just type and enter my password. The system (i assume boots into ubuntu) but I got no way of going onto the x or nvidia settings to change my display to external monitor EDIT well I booted into terminal using control shift F1 i think, and now I'm trying to reporgram x.org, but strangely it seems bland with not a lot of settings in it EDIT 2 xrandr returns "Can't open display" EDit 3 after some messing around with xrandr and xinit ... my x.org only displays one monitor instead of two in its settings although both, i.e. the laptop and external screens are both connected. EDIT 4 it seems that x.org now has a "screen" and "monitor" section, I can't seem to be able to boot linux into monitor. I get a "Monitor is not a valid keyword" in this subsection

    Read the article

  • Thinkpad T530 with Optimus and Docking Station

    - by Vic Boudolf
    I have a Lenovo Thinkpad T530 with Optimus video, which is not supported on 12.04.1. I don't normally need the discrete (nVidia) graphics, so I turn it off in the BIOS settings to achieve longer battery life (and so that the screen dimmer will work), but when placed in the docking station, the integrated (Intel) graphics don't power the HDMI ports. (The VGA port does work, but I want to focus on the HDMI.) This means I have to change the BIOS settings constantly. Is there any way to have the system detect the docking station and power up/enable the discrete graphics accordingly? I don't need to do it on the fly. Just at startup. This post suggests that bumblebee can turn the discrete graphics on and off for specific applications, but I just want to turn it on or off. [2 suggests that vga_switcheroo will not work with nVidia Optimus.

    Read the article

  • What does "fully supported" mean in context of Radeon Opensource Video Driver?

    - by stevecoh1
    UPDATE: This is not a request for support of my specific issue. Details of that issue are here: How to recover from bad upgrade to 13.04 (Unity very slow) . I have "solved" that issue, for the time being anyway, by loading alternative lighter weight desktops. This question was opened specifically to question the meaning of the documentation at https://help.ubuntu.com/community/RadeonDriver . END OF UPDATE There it is, in Black and White: https://help.ubuntu.com/community/RadeonDriver Fully Supported All these Radeon(HD) cards and derivatives have good 3D acceleration support. This is not an exhaustive list: ... RV610/RV630 Radeon HD 2400/2600/2700/4200/4225/4250 Yet in my case (the HD2400) this proves to be manifestly untrue, at least if "Fully Supported" means sufficient to run Unity in Ubuntu 13.04. It runs all the applications I can launch under Unity, but Unity itself is unbearably slow. It's quite striking really. Click on the "Dash" - go get a cup of coffee. Type a key in the Unity search box, wait five seconds for it to appear. Type Alt-tab and wait five seconds for the screen to finish painting. None of these issues appear outside of Unity components. As you all know, there are complaints about slow performance all over the Internet about Unity. Shouldn't this page somehow address this issue? Especially if "fully supported" doesn't mean sufficiently to run the default modern Ubuntu release. What does "fully supported" mean?

    Read the article

  • Resolution stuck in 640x480 in grub, 11.04 and 12.04

    - by user89797
    I have three operating systems on my machine, Windows 7x64, Ubuntu 11.10 and 12.04 both x64 as well. All three were running at full resolution for my monitor, as well as in the Grub 1.99 boot screen. After booting into Windows, I rebooted my machine and found my Grub resolution was suddenly 640x480. Booting into both versions of Ubuntu, I find myself stuck at that resolution as well. I made no driver changes recently, and hadn't even booted into the 11.10 build in a month or more. I've gone through both proprietary Nvidia driver options for my card (GeForce 9800GT) as well as the open source drivers in 12.04 to no avail. I can't figure out what could have caused this change in both versions of Ubuntu and Grub simultaneously. Windows 7 is unaffected so I think that safely rules out hardware failure. EDIT Ok, so I couldn't boot an graphical live disks, I tried ubuntu 12.04 i386 and x64 as well as 12.10 beta x64 and all of them would flash the initial logo, go to a blank screen with a flashing cursor in the upper left and then my display would die. I managed to boot 12.04 server and get into recovery. I reinstalled grub and went into recovery mode for my 12.04 build. If I boot in safe graphics mode I can get 1280x768, but as soon as I reboot it's broken again. I've tried reinstalling the nvidia drivers and that leaves me with a system stuck at max 640x480. None of these changes have had any impact on the 11.10 build, which is still stuck at 640x480 Given that I can push a somewhat higher resolution in 12.04, and full resolution in windows 7 I'm pretty convinced it's not an issue of my monitor failing. It must be something to do with the graphics drivers. I can't figure out what could be the issue though. I'm especially perplexed that I can't boot any live images

    Read the article

  • Hybrid Graphics Functional won't work with my Asus UL30V anymore

    - by futuress
    The problem is that I am no longer able to boot in compatibility mode for just turning on my Nvidia graphics to install the driver. Because no login screen will appear if Ubuntu is loading. In Ubuntu 11.10 I was able to activate nvidia graphics only' option this way: 1) Change BIOS to 'compatibility mode' which will turn off the Intel card. 2) Install the Nvidia proprietary driver using Ubuntu's driver finder (Additional Drivers) and then reboot. I was not interested using only the Intel graphics, for the sake of battery life. Now I have both cards running and they drain my battery life dramatically. And the main problem of this configuration no OpenGL is available, so I can't play any games any more. At this point, I have a pre-solution. I uninstalled the nvidia drivers and installed bumblebee. Now the Intel card is recognized. I would prefer to run just the nvidia card as in Ubuntu 11.10 but for now this is better than nothing. Does anybody else have the same problem?

    Read the article

  • How can I determine which GPU card is running at PCI Express 2.0 x16 & which is using x8?

    - by M. Tibbits
    Is there a way to determine the speed of the PCI Express connection to a specific card? I have three cards plugged in: two Nvidia GTX 480's (one at x16 & and one at x8) one Nvidia GTX 460 running at x8 Is there some way, either by a function call in C or an option to lspci that I can determine the bus speed of the graphics cards? When I only use one of the cards for my CUDA program, I'd like to use the one which is running at x16. Thanks! Note: lspci -vvv dumps out For the two GTX 480s. I don't see any differences that pertain to bus speed. 03:00.0 VGA compatible controller: nVidia Corporation Device 06c0 (rev a3) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at b0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at bc000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at df00 [disabled] [size=128] [virtual] Expansion ROM at b8000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 03:00.1 Audio device: nVidia Corporation Device 0be5 (rev a1) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 0: [virtual] Memory at d7ffc000 (32-bit, non-prefetchable) [disabled] [size=16K] Capabilities: <access denied> 04:00.0 VGA compatible controller: nVidia Corporation Device 06c0 (rev a3) Subsystem: eVga.com. Corp. Device 1480 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at cc000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at cf00 [size=128] [virtual] Expansion ROM at c8000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 04:00.1 Audio device: nVidia Corporation Device 0be5 (rev a1) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 5 Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> And the only differences I see relate specifically to the memory mapping: myComputer:~> diff card1 card2 3c3 < Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- --- > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 7,11c7,11 < Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M] < Region 1: Memory at b0000000 (64-bit, prefetchable) [size=128M] < Region 3: Memory at bc000000 (64-bit, prefetchable) [size=64M] < Region 5: I/O ports at df00 [disabled] [size=128] < [virtual] Expansion ROM at b8000000 [disabled] [size=512K] --- > Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] > Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] > Region 3: Memory at cc000000 (64-bit, prefetchable) [size=64M] > Region 5: I/O ports at cf00 [size=128] > [virtual] Expansion ROM at c8000000 [disabled] [size=512K] 18c18 < Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- --- > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 19a20 > Latency: 0, Cache Line Size: 64 bytes 21c22 < Region 0: [virtual] Memory at d7ffc000 (32-bit, non-prefetchable) [disabled] [size=16K] --- > Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=16K]

    Read the article

  • How do I disable changing proxy settings?

    - by gap
    I've got several machines, running 14.04.1, for kids to access. Each machine has accounts for each kid, as well accounts for several adults. Although I've set a system wide proxy use policy, it doesn't get used by Chrome. Instead, I had to log into each kids account and set a proxy use policy, pointing to tinyproxy/dansguardian, for safe internet access. The problem is that, should the kids get an ounce of computer savvy, they'll figure out that they can launch the proxy settings config panel from Unity, then change the proxy settings to None, and completely bypass the "safe" internet scheme I've setup. Can anyone tell me how I can disable those user accounts from being able to modify their proxy settings (not the "system wide" ones... those arent used.. this is the per-user settings). Thanks

    Read the article

  • Wired connection stops working suddenly

    - by user90950
    I have Ubuntu 12.04.I was downloading something via aria..and then it suddenly stopped..no connection to Internet. I tried to ping the host but no reply..also tried to ping the route 192.168.250.1 but no reply got a message saying 'Ubuntu 12.04 has experienced internal error'. I restarted system but nothing is sorted out. The wired connection 'establishes' but I am not able to use Internet or ping either to host/route/8.8.8.8. The wireless is working fine and it does connect to Internet. I have a static IP address for wired connection and it does connect to Internet on Windows OS installed on this same Laptop with same IP settings.. please suggest how do i get my wired connection start working properly again..

    Read the article

  • Microsoft LifeCam Audio Issue

    - by Daniel Samson
    Running Ubuntu 12.04.1 LTS 32-bit on a computer with an Intel core i5 processor, 4GB RAM and a NVIDIA 450GTS Graphics card. I am trying to set up Skype with my webcam. So far everything works almost perfectly, however my Microsoft LifeCam-VX700 v2.0 audio does not work correctly. The audio feed is just static/white noise. I have checked the hardware using windows and it worked perfectly there. The video works great in Ubuntu. It is just the audio that is the problem. What can I do to rectify this problem?

    Read the article

< Previous Page | 500 501 502 503 504 505 506 507 508 509 510 511  | Next Page >