Search Results

Search found 42786 results on 1712 pages for 'install from source'.

Page 509/1712 | < Previous Page | 505 506 507 508 509 510 511 512 513 514 515 516  | Next Page >

• Host name change breaking http? Fedora

  - by Dave

  OK so I have been messing around on my development server. It has been a while since I have had my head in linux and I suspect I have broken something. I have SSH running and that is working fine. I also have HTTP and I had FTP running also. Earlier today I decided I wanted to rename the machine so I updated the /etc/hosts file and /etc/sysconfig/network. I also changed the server name in the httpd.conf. I rebooted the machine and reconnected to SSH fine. Later I was messing around with the FTP service (trying to tighten up the user security) and when i tried to connect remotely to FTP no joy, it said cannot connect. I thought that was weird but had planned to remove ftp as we will be using github so removed ftp and moved on. Then I tried to connect to the website but major fail. even connecting to the IP address is failing. I used lynx to connect to the localhost and there was my site so something going on at server level. I thought maybe something up with iptables but I have not changed them but tried adding http but still no joy. I have a - Fedora release 17 (Beefy Miracle) NAME=Fedora VERSION="17 (Beefy Miracle)" ID=fedora VERSION_ID=17 PRETTY_NAME="Fedora 17 (Beefy Miracle)" ANSI_COLOR="0;34" CPE_NAME="cpe:/o:fedoraproject:fedora:17" Fedora release 17 (Beefy Miracle) Fedora release 17 (Beefy Miracle) Linux version 3.3.4-5.fc17.x86_64 ([email protected]) (gcc version 4.7.0 20120504 (Red Hat 4.7.0-4) (GCC) ) #1 SMP Mon May 7 17:29:34 UTC 2012 This is my iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT icmp -- anywhere anywhere ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh REJECT all -- anywhere anywhere reject-with icmp-host-prohibited Chain FORWARD (policy ACCEPT) target prot opt source destination REJECT all -- anywhere anywhere reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT) target prot opt source destination Like I say I can use SSH no issue but http although running is a no go from a remote computer. Any ideas?

  Read the article

• How to share text, pictures and video to restricted set of users

  - by joaoc

  I want to share pictures and videos of my kid growing up but I don't want it to be open to the public. I just want me and my wife to be able to add material and then share with grandparents and friends who would be given a username/password or some other solution that authenticates them. This content would preferably be available remotely over the internet or downloaded periodically to the allowed viewers computers. The second option most likely means they would have to install a client, which I am not too fond of doing (I would have to ask them to install it, help configure for different platforms, ...) I'm at the start but I would like software that also allows export of the data (if one day I want to migrate to a different solution). Folder sharing I don't know if Windows folder sharing is reliable, robust and safe enough to share over the internet. Dropbox could be a software solution, but it's limited to 2GB and requires receivers to also install and configure software. A folder is just a collection of files, so it would be harder to keep them organized with text describing the pictures/video Email I could email the content every now and then but videos are almost always too big to go as attachments This would also not provide a history of updates to anyone just recently joining in Are there other solutions to achieve this? NOTE: I also thought that software to run a local or remote blog could be an option but we aren't allowed to ask those questions on superuser because one admin doesn't like cloud-computing questions. But if you do think it's the best approach and can suggest a solution, do state it in the answers anyway!

  Read the article

• ubuntu 9.10 installer doesn't recognize the hard drive

  - by dan

  I downloaded Ubuntu 9.10 x86_64 and am trying to install it on a fairly modern system with a Gigabyte GA-MA770-UD3 motherboard. Ubuntu 9.04 installed fine and still will when I stick that disc in, but 9.10 doesn't see my hard drive (western digital 250GB). If I boot from the disc, I can install gparted and it does recognize the drive, but when I try to start the install process from the live disc, Ubuntu again doesn't recognize the hard drive. I checked /var/log/messages and see this: Nov 12 17:28:08 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was bad, boot with 'nodmraid'. Nov 12 17:28:08 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. Nov 12 17:28:08 ubuntu activate-dmraid: no raid sets and with names: "nvidia_ciiajheb-0" Nov 12 17:28:08 ubuntu activate-dmraid: ERROR: either the required RAID set not found or more options required. I checked my BIOS, SATA is enabled and is set to IDE mode, so there shouldn't be software RAID, but nonetheless, I added nodmraid to the boot line and tried again. It still doesn't recognize the drive. I checked /var/log/messages again and now see this: Nov 12 17:49:38 ubuntu activate-dmraid: Serial ATA RAID disk(s) detected. If this was boad, boot with 'nodmraid'. Nov 12 17:49:38 ubuntu activate-dmraid: Enabling dmraid support Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Nov 12 17:49:38 ubuntu activate-dmraid: WARNING: dmraid disabled by boot option Any ideas on things to try? I've tried all of the various BIOS settings for SATA. IDE,RAID, etc. Nothing seems to work.

  Read the article

• Windows is very slow with my new SSD

  - by Maksym H.

  I have a laptop HP probook 4520s with Core i5 M480 @ 2.67Ghz, 4Gb RAM, 640 GB HDD Radeon HD 6370m 1GB video card. It would seem like a good stack for work, right? But My HDD has crashed after everyday walking with laptop about 1 year. After buying my new SSD (Patriot memory - Torqx II 128 Gb SATA II) and installing new Windows 8 from scratch - it was amazing fast. But I had only install windows updates, and I feel that the speed become the same as my old HDD, after install other software for my work, it becomes so slow, so when I use my PC with old lower configuration and it really works better than my awesome laptop... I checked that TRIM and AHCI mode are turned on. So why's that? I asked for help in Patriot Memory support, they suggested to send them ATTO test results, done, sent. Here is the response: "Thank you very much for the attached results. Looking at the results, I can see that your SSD speed is a lot lower than it should be. Can you tell me your system specs?" Until they checked my email, I re-installed Windows 8 to Windows 7 and it was again perfect, but the story repeats it becomes slower and slower after every installing new software. Check out some screenshots.. (sorry for the screenshot with russian TaskManager, I hope you will recognize those parameters accordingly with your english or other lang TaskManager) So the main issue that something everytime loads the disc on 100% and the response time is jumping around 1000-3000 ms. Why am I asking about Windows? Because I tried to install Linux Mint (x86) and It just flies. So great performance independent on how many programs I have installed. Only Windows (any 7 or 8) has this problem. So guys, I appreciate any ideas about how to fix that and may be answers of main question - "why is it so.?" Thanks!

  Read the article

• mysql_query missing during installation

  - by Arsenal

  Hi, I'm trying to install the pdo_mysql extension... I managed to install it succesfully, but ever since I upgraded mysql to 5.1.34 (using rpm packages) it seems to have gone down so I tried to reinstall it. However it seems to crash on ./configure as it gives 'mysql_query not found' error: configure:3961: checking for mysql_query in -lmysqlclient configure:3991: gcc -o conftest -g -O2 -I/usr/local/include/php -Wl,- rpath,/usr/lib/mysql -L/usr/lib/mysql -lmysqlclient -lz -lcrypt -lnsl -lm -lmygcc conftest.c -lmysqlclient -rdynamic -L/usr/lib/mysql -lmysqlclient -lz -lcrypt -lnsl -lm - lmygcc >&5 /usr/bin/ld: skipping incompatible /usr/lib/mysql/libmysqlclient.a when searching for -lmysqlclient /usr/bin/ld: skipping incompatible /usr/lib/mysql/libmysqlclient.a when searching for -lmysqlclient /usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-redhat-linux/3.4.6/../../../libmysqlclient.so when searching for -lmysqlclient /usr/bin/ld: skipping incompatible /usr/lib/libmysqlclient.so when searching for -lmysqlclient /usr/bin/ld: cannot find -lmysqlclient collect2: ld returned 1 exit status configure:3997: $? = 1 configure: failed program was: | /* confdefs.h. */ ... In that file there seems to be a mysql_query(); statement. I'm pretty sure mysql_query works however since all of my websites are running normally. However the current setup is a mess (previous students kind of messed it up) and there are a whole lot of libmysqclient's in /etc: libmysqlclient.so.10.0.0 libmysqlclient.so.12.0.0 libmysqlclient.so.14.0.0 libmysqlclient.so.15.0.0 libmysqlclient.so.16.0.0 libmysqlclient_r.so.10.0.0 libmysqlclient_r.so.12.0.0 libmysqlclient_r.so.14.0.0 libmysqlclient_r.so.15.0.0 libmysqlclient_r.so.16.0.0 And just as much symlinks. Does anyone know how to get this right? Many thanks! (oh, and no pecl install pdo_mysql doesn't get me any further). I'm runnnig CentOS 4 with php 5.2.9 compiled from source and MySQL 5.1.34

  Read the article

• Setting up xpra for client use in OS X

  - by Jonathan

  I've been trying to get xpra to run on OS X for the last few days to connect to my Ubuntu server. Note that there's a GUI for it called shifter, but that (at least on OS X) is still far too buggy. For those who don't know what xpra is, if you know what screen is, it's like screen for GUI X Windows apps tunneled over ssh. You can render a remote X app locally so it's faster than sending a series of compresses screen shots (like VNC), but with xpra you can disconnect and reconnect on different computers. To get the basic functionality you can just type "ssh -X server.location" and any GUI app you open from the command line will open locally. I've been able to get xpra to build by doing the following: Download pari-all-0.0.6.tar.gz from the xpra site listed under upstream and untar it. Issue the following Mac Ports command (Dependencies thanks to RogBlog): sudo port install python25 python26 py26-pyrex py26-gtk xorg-libXtst py25-gobject py25-gtk py25-nose py26-nose xorg-libXdamage xorg-libXcomposite xorg-libXtst xorg-libXfixes In the upstream list of v0.0.06 patches (NOT 0.0.8pre!) on the xpra site listed above, download mswindows-conditional-pyrex.patch. Open the patch with your favorite text editor and change the single occurrence of "win" in it to "darwin". Apply the patch to setup.py. Run do-build in the command line. Now where I'm stumped: how do I run xpra? The build produces a sub directory called install/bin in which xpra is located, but when I try to run it I get the following error: Traceback (most recent call last): File "./xpra", line 4, in import xpra.scripts.main ImportError: No module named xpra.scripts.main There is a file called main.py under xpra/scripts, but I don't know any python and I'm not sure if this is what it's looking for, and what to do with it even if it is. My goal is to set up xpra so I can install it into /usr/bin (or some other common path for executables) and execute it whenever I please. What do I do next?

  Read the article

• New SBS 2011 installation (not migration) in an existing 2008 R2 domain

  - by Tong Wang

  My current network setup has two servers: a Windows 2008 R2 with TMG 2010 as edge firewall (TMG server), a second 2008 R2 with DC, DNS and Hyper-V roles (DCDNS server). I was trying to install SBS 2011 as a child partition on DCDNS, first I installed SBS 2011 in English and did the migration successfully. However, later on, I found that I can't change the display language in SBS 2011 once it's installed (but the clients require a different language), so I had to re-install the SBS in a different language. It is during the re-installation that the problem came up: the migration can't be completed with some error message stating "can't access the source server". I re-ran the migration preparation tool, but it didn't make any difference. I wonder if it's because the source server can only be "migrated" once. Since I only need to setup a handful of users and computers, so I decided to do a new install of SBS and picked a different domain name. But I can't get the SBS to connect to LAN: it can't ping other servers, neither can other servers ping the SBS server. I've tried to stop the DC/DNS services on DCDNS and restart SBS, but with no difference. Anyone has idea how to fix this problem?

  Read the article

• Can't connect to vsftpd on Ubuntu 10.04

  - by Johnny

  I started the vsftpd on Ubuntu 10.04, but can't connect to it. The error says(FTP Client): Status: Connecting to 124.205.xx.xx:21... Error: Connection timed out Error: Could not connect to server I've checked the server status, and vsftpd is running: $ ps ax | grep vsftpd 23646 ? Ss 0:00 /usr/sbin/vsftpd 23650 pts/1 S+ 0:00 grep --color=auto vsftpd port 21 is under listening as well: $ netstat -tlnp | grep 21 (No info could be read for "-p": geteuid()=1000 but you should be root.) tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN - I can connect to localhost: $ ftp localhost Connected to localhost. 220 (vsFTPd 2.2.2) Name (localhost:jlee): 331 Please specify the password. Password: 230 Login successful. Remote system type is UNIX. Using binary mode to transfer files. ftp> Here is iptables output $ sudo iptables -vL Chain INPUT (policy ACCEPT 191 packets, 144K bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 124 packets, 28502 bytes) pkts bytes target prot opt in out source destination What's the problem here?

  Read the article

• Which isn't working on linode servers (Ubuntu 10.04)?

  - by chrisjlee

  Currently trying to configure a linode server running on ubuntu 10.04. I utilized a stackscript (Default drupal profile) which seemed to run successfully. The log indicate so as well. Then ssh'd into the server (as root) to try to configure php. When i run a which php, which php5 they both return nothing. A which python returns something though. I know where the default path to php but i usually just like to use it as confirmation that php exists. Do i have to modify some configurations to enable which to work? Also tab completion doesn't seem to work for when i apt-get install? Update: Thanks for the suggestions guys. I've ran a couple commands and no luck either: [ root@ ~ ] $ dpkg -l |grep php [ root@ ~ ] $ apt-get install php5-cli Reading package lists... Done Building dependency tree Reading state information... Done Package php5-cli is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package php5-cli has no installation candidate Then i tried installing php and php cli: [ root@ ~ ] $ sudo apt-get install php5 php5-cli sudo: unable to resolve host xxxxxxx Reading package lists... Done Building dependency tree Reading state information... Done Package php5 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package php5 has no installation candidate

  Read the article

• Cannot Start Passenger 3.0.18 Using Mountain Lion (OS X Server) and RVM

  - by LightBe Corp

  I recently did a clean install of Mountain Lion on my Mac Mini Server. I installed version 3.0.18 using a gem according to the directions on http://www.phusionpassenger.com with no errors that I could see. rvmsudo gem install passenger-enterprise-server-3.0.18.gem rvmsudo passenger-install-apache2-module Here are my entries in /etc/apache2/httpd.conf with my username masked: LoadModule passenger_module /Users/username/.rvm/gems/ruby-1.9.3-p327/gems/passenger-enterprise-server-3.0.18/ext/apache2/mod_passenger.so PassengerRoot /Users/username/.rvm/gems/ruby-1.9.3-p327/gems/passenger-enterprise-server-3.0.18 PassengerRuby /Users/username/.rvm/wrappers/ruby-1.9.3-p327/ruby I uncommented out the following statement: Include /private/etc/apache2/extra/httpd-vhosts.conf Here is a sample virtual host entry. I have three of them in the file. <VirtualHost *:80> ServerName www.mydomain.com ServerAlias mydomain.com PassengerAppRoot /Users/username/Sites/myfolder/ DocumentRoot /Users/username/Sites/myfolder/public <Directory /Users/username/Sites/myfolder/public> Allow from all AllowOverride all Options -MultiViews </Directory> </VirtualHost> I have restarted Apache several times. Here is information from my server: [~]$ ps -ef | grep Passenger 501 18804 303 0 12:39PM ttys000 0:00.00 grep Passenger [~]$ rvmsudo passenger-status Password: **ERROR: Phusion Passenger doesn't seem to be running.** [~]$ rvmsudo passenger-config --version 3.0.18 I have tried doing online searches on this. I was surprised that there was not all that much on this specific error even though from my understanding Passenger has been around for a few years. I have posted this issue on the Phusion Passenger Google Groups but have not heard anything. Any help would be appreciated, the sooner the better LOL. Seriously I need to have one of my three websites up by tomorrow evening. This is the only issue stopping that from happening. Thanks again.

  Read the article

• How to setup a virtual machine in Ubuntu desktop to run Debian Server

  - by stickman

  I want to run a virtual machine in my Ubuntu desktop that runs a Debian server. The purpose of this is to generate Debian packages. I have some C++ applications that were originally developed on my Ubuntu machine, and I need to (re)compile them on a Debian server in order to: build Deb packages for deployment on a Debian server make sure that the applications will definitely work on a debian server The idea is so that I can do 90% of my development on Ubuntu (where I am more comfortable), and deploy a binary package that definitely works on Debian. BTW, I am developing on Karmic Kola (Ubuntu 9.10). [Edit] Following the advice I got so far, I have installed debootstrap and Debian 'Lenny' on /srv/chroot/debian_lenny on my machine. I am not sure this is the server version, but in any case I dont think that matters for my purposes (though it would be useful to know how to specifically install the server version). At the moment though, I am like a fish out of water, since there is no GUI, and it is only a console that I have in the chroot jail. I had a look in the home folder (I cheated, by using the KNavigator in Ubuntu), and there are no folders there - which presumably mean that no users have been set up as yet in the Debian "system". I would like to know how to do the following: Download and install the dev tools needed for (re)compiling my C++ apps Copy my projects from the Ubuntu "system" to the Debian "system" After building the binaries, I would like to create a debian binary package containing all of my binaries, so that I can install the package on a Debian server (my remote server)

  Read the article

• How to access previous VHD versions of system backup?

  - by feklee

  Quote from the 31 Oct 2009 TechNet article "Learn more about system image backup": During the first backup, the backup engine scans the source drive and copies only blocks that contain data into a .vhd file stored on the target, creating a compact view of the source drive. The next time a system image is created, only new and changed data is written to the .vhd file, and old data on the same block is moved out of the VHD and into the shadow copy storage area. Volume Shadow Copy Service is used to compute the changed data between backups, as well as to handle the process of moving the old data out to the shadow copy area on the target. This approach makes the backup fast (since only changed blocks are backed up) and efficient (since data is stored in a compact manner). When restoring the image, blocks will be restored to their original locations on the source disk. If you want to restore from an older backup, the engine reads from the shadow copy area and restores the appropriate blocks. For the last days, a daily system backup of drive C: to drive E: has been scheduled and run by Windows 7 Backup and Restore. Drive C: currently holds 233 GB of data, which fits comfortably on drive E:, a 1 TB drive, with 727 GB of free space remaining. How do I access the previous version of a VHD? I right clicked on files and folders in E:\WindowsImageBackup, and I looked for Previous Versions but always: There are no previous versions available

  Read the article

• Forcing programs to be installed to another drive

  - by zyboxenterprises

  I have an SSD as my main Windows drive, with a 640GB 2.5" HDD, partitioned to store programs and user settings, and also to act as backup (it's the only thing I had lying around at the time of building my PC). The task was to make the PC as fast as possible, while having an increased storage capacity available to store normal user data, and to assist in my small data recovery business. The problem is that whenever I install a program, it installs to C:\Program Files [(x86 for the 32 bit programs]\, although I have changed the environment variables. This wouldn't normally be an issue, however every installation program points its shortcut to my 640GB HDD. The root layout of both drives: To clarify: Program files get installed to C:\ Program shortcuts are always pointed to Z:\, my 640GB HDD Modifying the relevant environment variables doesn't do anything, I looked at this, but however it only talks about modifying the registry and environment variables, which I have already done so. I install to the Z:\ drive if the installation program lets me change the installation path, but however the installation programs sometimes don't let me change this. Is there a way that I can force every program to install to the relevant location on Z:\? Perhaps I'm missing something here? Edit: Found this program; would it be appropriate to use in my case? I would be able to move the entire Program Files (and its x86 version) to Z:\, without impacting on the performance.

  Read the article

• Display stretches 4:3 ratios; Adds scrolling to other ratios

  - by Matt

  I have a dual monitor setup. Normally, they both display at 1680x1050. They have been setup this way for about a year. I'm using Windows XP Professional 2003 x64 SP2. Today, out of nowhere, one of the monitors kicked back to a lower resolution. I was not playing with any configuration at the time.. in fact all I had done was close a window (maybe a browser). But the thing is that the resolution is still preserved partially by the fact that the screen will scroll when you move the mouse. So it's like looking through a 1024x768 window into a 1680x1050 world. The monitor itself does not appear to be damaged, because I also have it connected to my netbook (via KVM) and higher resolutions work fine. I tried uninstalling/reinstalling the drivers to no avail. System restore doesn't help either. I'm unsure of the exact ATI card I'm using.. Device Manager lists it as "Radeon X300/X550/X1050". There is no Catalyst Control Center software installed. I tried to install it, but there doesn't seem to be a way to install it by itself ... it forces you to install another driver, which breaks both of my displays, forcing me to go into safe mode and run system restore again. Any ideas? Thanks EDIT: After playing around more, I discovered that the "scrolling" behavior is only present for aspect ratios that are not 4:3. For 4:3 ratios, it just stretches out to fit the wide screen. My monitor's native ratio is 16:9 .. what could be causing it to think it needs to scroll?

  Read the article

• iptables -- OK, **now** am I doing it right?

  - by Agvorth

  This is a follow up to a previous question where I asked whether my iptables config is correct. CentOS 5.3 system. Intended result: block everything except ping, ssh, Apache, and SSL. Based on xenoterracide's advice and the other responses to the question (thanks guys), I created this script: # Establish a clean slate iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT iptables -F # Flush all rules iptables -X # Delete all chains # Disable routing. Drop packets if they reach the end of the chain. iptables -P FORWARD DROP # Drop all packets with a bad state iptables -A INPUT -m state --state INVALID -j DROP # Accept any packets that have something to do with ones we've sent on outbound iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT # Accept any packets coming or going on localhost (this can be very important) iptables -A INPUT -i lo -j ACCEPT # Accept ICMP iptables -A INPUT -p icmp -j ACCEPT # Allow ssh iptables -A INPUT -p tcp --dport 22 -j ACCEPT # Allow httpd iptables -A INPUT -p tcp --dport 80 -j ACCEPT # Allow SSL iptables -A INPUT -p tcp --dport 443 -j ACCEPT # Block all other traffic iptables -A INPUT -j DROP Now when I list the rules I get... # iptables -L -v Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 DROP all -- any any anywhere anywhere state INVALID 9 612 ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED 0 0 ACCEPT all -- lo any anywhere anywhere 0 0 ACCEPT icmp -- any any anywhere anywhere 0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:ssh 0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:http 0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:https 0 0 DROP all -- any any anywhere anywhere Chain FORWARD (policy DROP 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 5 packets, 644 bytes) pkts bytes target prot opt in out source destination I ran it and I can still log in, so that's good. Anyone notice anything major out of wack?

  Read the article

• Broken Python installation on CentOS 5.8

  - by Beckett

  I already searched for solution to my problem via Google and stackoverflow's search facility, but haven't found anything related specifically to it. Here's the problem: I needed python 2.7.3 on CentOS 5.8 machine which has only python 2.4.3 preinstalled. Also neither there's the suitable version in it's repositories nor I can upgrade installed version. That's why I decided to build python from source code. But I've made a mistake: instead of make altinstall I did make install thus changing default version of the current installation. It was before I found this article - How to install Python 2.7.3 on CentOS 6.2 . I guess 5.8 and 6.2 versions aren't different to the extent this article is inapplicable. After installation of new python version I installed pip, but once I tried to invoke it, I got "No module named pkg_resources" error. In order to solve this issue I installed setuptools from repository. But it had only led to another error: "Distribution Not Found". My final step was to follow the guide I posted the link to, but I was unable to perform last step: easy_install-2.7 virtualenv command threw "-bash: /usr/local/bin/easy_install-2.7: .: bad interpreter: Permission denied" error. Now when I try to invoke pip or pip-2.7 both commands raise the same error with different names of binaries after "-bash:". Is there any way to fix this problem, so I could install new python version (2.7.3) alongside with the preinstalled one (2.4.3) according to the guide? Any help will be appreciated. P.S.: yum is working fine, although it needs python to function, so I hope the damage I unknowingly caused isn't very severe. Also I'm not a native English speaker, so I apologize for possible occasional grammatical and/or spelling errors.

  Read the article

• Is Ubuntu a viable replacement of Windows XP for small enterprise environments?

  - by Alex. S.

  Hi all, I'm a newbie systems administrator, so any advice would be great. I would like to setup ubuntu 8.04 lts in a small office of consulting in management (around 50 workstations) instead of Windows XP. I would install MS Office 2007 via WINE (*). It would be a fresh installation, so the migration would be less of a pain. The new setup would also include a small server as document repository and a backup server by now. Later, I would install another goodies like a IM server, a document management solution, and whatnot collaborative tool. What do you advice in this scenario? Do you think is viable? Should I try to convince my managers this is a good idea? I consider myself as a fair experienced user in both systems, and I'm the only guy in charge of everything. I need to cut costs down, and I think that antivirus and antimalware software are a waste of money and time. Is this good idea?, or should I resign and try to lock down the Windows systems and install AV software? Is there anything else in this setup I'm not foreseeing? (*) The only catch in my test machine until now had been that Office SmartArt doesn't work properly, the rest of Office 2007 may seem ok.

  Read the article

• Error compiling PHP 5.5.9 on CentOS 6.5 during make command

  - by Chris Mancini

  Here is the error message: cc: internal compiler error: Killed (program cc1) Please submit a full bug report, with preprocessed source if appropriate. See <file:///usr/share/doc/gcc-4.6/README.Bugs> for instructions. make: *** [ext/fileinfo/libmagic/apprentice.lo] Error 1 The very last thing make was processing is apprentice.lo which appears to be part of the image manipulation libraries (maybe?). I am using Ansible to provision my instance. It is a Digital Ocean single core 512MB VM. I have been using vagrant / ansible with the same config locally for dev and it has compiled fine, this is the first cloud VM I am attempting to provision. The only difference is the base image for my DO server is coming from DO and for my local dev, I built my own Vagrant box via VirtualBox from a stock CentOS basic server install. I pull it down from my DropBox. The problem has been experienced by others and reported as a php bug report My php ansible role up to the error: --- - name: Download php source get_url: url={{ php_source_url }} dest=/tmp register: get_url_result - name: untar the source package command: tar -xvf php-{{ php_version }}.tar.gz chdir=/tmp when: get_url_result.changed or php_reinstall - name: configure php 5.5 command: > ./configure --prefix={{ php_prefix }} --with-config-file-path={{ php_config_file_path }} --enable-fpm --enable-ftp --enable-mbstring --enable-pdo --enable-soap --enable-sockets=shared --enable-zip --with-curl --with-fpm-group={{ nginx_group }} --with-fpm-user={{ nginx_user }} --with-freetype-dir=/usr/lib64/ --with-gd --with-jpeg-dir=/usr/lib64/ --with-libdir=lib64 --with-mcrypt --with-openssl --with-pdo-mysql --with-pear --with-readline --with-tidy --with-xsl --with-zlib --without-pdo-sqlite --without-sqlite3 chdir=/tmp/php-{{ php_version }} when: get_url_result.changed or php_reinstall - name: make clean when reinstalling command: make clean chdir=/tmp/php-{{ php_version }} when: php_reinstall - name: make php command: make chdir=/tmp/php-{{ php_version }} when: get_url_result.changed or php_reinstall Thanks in advance for any help. :)

  Read the article

• Upgrading only certain packages via the getdeb repo

  - by intuited

  I'm a bit confused about how getdeb.net works now. The last time I got a package from there was a while ago; at that point the procedure was that you would just download a .deb for each package that you wanted to install/upgrade and then install it using dpkg -i. However the inexorable march of progress has lent its trumpets to this system as well, and getdeb installs are now done via their repo, which is registered with apt in /etc/apt/sources.list.d, after you install a single package that makes the changes to the apt database. I've installed that package, and I've discovered that aptitude dist-upgrade now wants to upgrade a lot of packages on my system that weren't ready for upgrades prior to the installation of the getdeb package. If I rename the file /etc/apt/sources.list.d/getdeb.list to something with a different extension, then do aptitude update && aptitude dist-upgrade, it stops wanting to upgrade packages. So I gather that the default behaviour is now to upgrade all packages to the version available at getdeb. This is not particularly appropriate, since these packages are not as well tested as the officially released versions. Is there a config setting somewhere that will prevent upgrading packages to versions from the getdeb repo unless this action is specifically selected? I'd like to be able to pick and choose what packages are upgraded via getdeb.

  Read the article

• Gigabit LAN not working on ASUS M2N-MX

  - by chmod

  Today I replace my FastEthernet switch with a newly bought gigabit switch (DGS-1008A). All computers in my house are displaying that the connection speed is 1 Gbps except for one. The computer that is not working is an ASUS M2N-MX which contain an onboard gigabit NIC. See ASUS link for confirmation http://www.asus.com/Motherboards/AMD_AM2/M2NMX/ Here are some info of the machine OS: Windows 7 Ultimate SP1 64bit BIOS version: 1004 (latest) Driver: installed via Windows update (latest from Windows update) Windows Update: fully updated The machine is reformatted 3 days ago, so it's pretty clean, no junk, no virus, etc Cable: Amp CAT5E 5 meters In device manager, the name of the NIC is "NVIDIA nForce 10/100/1000 Mbps Ethernet" What I have try: I did try to install the driver provided in ASUS website, but there isn't any for Windows 7 64 or Vista 64. I did try to install the latest nForce340/6100, downloaded from Nvidia website. However, the LAN driver refuse to install, it complain that I already have the best driver installed. I looking in the property -- advance tab -- Speed/duplex settings, in an attempt to force it to run at 1000Mbps, but there is no 1000Mbps choice, only 10 and 100Mpbs. I change the CAT5E cable (use one from another computer that is running gigabit without problem) Anyone have this issue or know how to solve it? Thanks

  Read the article

• Installing Ubuntu guest crashes Hyper-V host

  - by Grant

  I have a weird problem that I don't even know where to begin diagnosing. Trying to install Ubuntu to a VM locks up the host system! My setup is: Dell R715 server, dual 16 core AMD opteron processors, 96GB RAM Dell MD3600f SAN Server 2008 R2 Datacenter System Center VMM 2012 There are 5 windows virtual machines running that have had no problems. This is the first linux VM I've tried to create. I setup a VM through virtual machine manager, set the CD drive to a Ubuntu 12.04 server x64 iso, and started it up. It boots up the normal ubuntu install menu, but the second I hit enter on "Install Ubuntu Server", I get disconnected. The HOST machine stops responding to pings. So do all virtual machines on it. It locks up entirely - keyboard on the host won't work, mouse won't move, numlock light won't change. There's no blue screen - the host is sitting at the login screen completely unresponsive. I can't find any relevant logs in event viewer after rebooting. What could cause the host machine to freeze like that? It's not a one time occurrence - it happens every time at the exact same point. Thank god this server isn't in production yet!

  Read the article

• yum fails installing php53-devel.x86_64

  - by coding_hero

  I need to recompile php on a Fedora server because I need to use the --enable-zip flag. When trying to install the devel package, I get the following message. This is after a 'yum clean all': yum install php53-devel.x86_64 Loaded plugins: rhnplugin, security rhel-x86_64-server-5 | 1.4 kB 00:00 rhel-x86_64-server-5/primary | 4.9 MB 00:00 rhel-x86_64-server-5 14161/14161 Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package php53-devel.x86_64 0:5.3.3-13.el5_8 set to be updated --> Processing Dependency: php53 = 5.3.3-13.el5_8 for package: php53-devel --> Finished Dependency Resolution php53-devel-5.3.3-13.el5_8.x86_64 from rhel-x86_64-server-5 has depsolving problems --> Missing Dependency: php53 = 5.3.3-13.el5_8 is needed by package php53-devel-5.3.3-13.el5_8.x86_64 (rhel-x86_64-server-5) Error: Missing Dependency: php53 = 5.3.3-13.el5_8 is needed by package php53-devel-5.3.3-13.el5_8.x86_64 (rhel-x86_64-server-5) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest Output of 'yum repolist': # yum repolist Loaded plugins: rhnplugin, security repo id repo name status rhel-x86_64-server-5 Red Hat Enterprise Linux (v. 5 for 64-bit x86_64) enabled: 14,161 repolist: 14,161

  Read the article

• Power Outage Interrupted Upgrade from Windows Vista Ultimate to 7 Ultimate, Reverted to Vista, Now Vista is failing... What Next?

  - by tednewk

  I was in the midst of what seemed to be a successful upgrade from Vista Ultimate to 7 Ultimate when there was a brief blackout. The upgrade failed and Windows reverted back to Vista. Now Vista is very slow to boot, has problems waking back-up from inactivity and quickly loses it's wireless connection. The wake-up problem manifests itself as the mouse is clearly shown on a black screen but I have no access to the Desktop or Taskbar or Explorer. Even Alt-Ctrl-Delete doesn't seem to work. No task menu, no reboot. Hitting the reset button reboots the machine with the usual Black Screen warnings offering Safe Mode. I tried to do a system restore to a point before the upgrade. That didn't seem to work. My guess is that my system is a mutant with parts of Vista and parts of 7 crashing each other. I would like avoid a clean install if at all possible to avoid reinstalling other software. What should I try now? My thoughts are: My a system back-up to lock the computer in place Trying a second 7 upgrade If that appears to be working make another back-up If not reload back-up and try a repairing Vista from DVD. If that appears to work make another back-up, let system stablize about a week then try 7 install again If that doesn't work are there any other options to try before settling for a clean install? Another complication, I am doing this by "remote control". I'm traveling with my job and I'll be talking my son through it over the phone. (Kind of like the landing the 747 cliche from all the 70's adventure shows!) So is there a way of simplifying the steps? Thanks Ted

  Read the article

• How can visiting a webpage infect your computer?

  - by Cybis

  My mother's computer recently became infected with some sort of rootkit. It began when she received an email from a close friend asking her to check out some sort of webpage. I never saw it, but my mother said it was just a blog of some sort, nothing interesting. A few days later, my mother signed in on the PayPal homepage. PayPal gave some sort of security notice which stated that to prevent fraud, they needed some additional personal information. Among some of the more normal information (name, address, etc.), they asked for her SSN and bank PIN! She refused to submit that information and complained to PayPal that they shouldn't ask for it. PayPal said they would never ask for such information and that it wasn't their webpage. There was no such "security notice" when she logged in from a different computer, only from hers. It wasn't a phishing attempt or redirection of some sort, IE clearly showed an SSL connection to https://www.paypal.com/ She remembered that strange email and asked her friend about it - the friend never sent it! Obviously, something on her computer was intercepting the PayPal homepage and that email was the only other strange thing to happen recently. She entrusted me to fix everything. I nuked the computer from orbit since it was the only way to be sure (i.e., reformatted her hard drive and did a clean install). That seemed to work fine. But that got me wondering... my mother didn't download and run anything. There were no weird ActiveX controls running (she's not computer illiterate and knows not to install them), and she only uses webmail (i.e., no Outlook vulnerability). When I think webpages, I think content presentation - JavaScript, HTML, and maybe some Flash. How could that possibly install and execute arbitrary software on your computer? It seems kinda weird/stupid that such vulnerabilities exist.

  Read the article

• How to verify system using right GPU, after system reset [duplicate]

  - by Antoros

  This question already has an answer here: Is my mobile AMD card being used? 2 answers OS: Windows 8 CPU: Intel® Core™ i7 Processor 3635QM GPU 1 : Intel HD Graphics 4000 GPU 2 : AMD Radeon™ HD 8870M other info: System Spects Problem: im unsure that CCC is using AMD card instead of Intel's, i have encountered several issues since updating to 8.1 and i don't know what to do What happened: Installed 8.1 patch first day After 1 minute of use, BBSOD, windows never loaded again System restore wouldnt recognize 8.0 restore points i did a system reset to windows 8 since the laptop was only 3 weeks old System Broke, it did restore to factory BUT kept the registry almost intact, i had to install almost everything again, since the factory drivers where working with the updated one's registry and several problems CCC Broke too <- What i've already done Installing new drivers on top of old ones didnt work, so i used AMD uninstaller first Uninstalled and Re-installed Intel's HD Graphics Driver Tried to install mobile center, but AMD told me that it wasnt compatible (even if thats the only driver that they provide via their page as seen Here) Tried to use Auto-Detect, couldnt install driver because card was disabled because it didnt have the drivers... (see what they did here?) Had to use a workaround with Samsung Update, the driver didnt appear as download so had to use search and downloaded the driver manually. Now the graphic card appears on device manager and catalyst but as 8800 series (not exact model), and cant check the card with neither dxdiag/GPU-z/HWMonitor when right-clicking on CCC only Intel card appears launching a game and using as "high performance" would speed it up a little but i cant be sure How to verify its working properly? HWMonitor wont show AMD card even when set to high performance Latest GPU-Z wont work because a problem with Intel's, and legacy ones wont either what can I do now? I don't even know if I fixed my problem or not, and i also want to to use Adobe Premier with it, and its locked (the option to run it with the amd card not intels) Edit: now it seems to work, but cant change the setting for adobe Premiere and other programs that i Need to

  Read the article

< Previous Page | 505 506 507 508 509 510 511 512 513 514 515 516  | Next Page >