Search Results

Search found 4759 results on 191 pages for 'depth buffer'.

Page 51/191 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

• Bluetooth txt file byte increases????

  - by cheesebunz

  Hi everyone, i am able to xfer files from 1 mobile device to another. When the sender sends this text file of 8 bytes, the receiver end will become a 256bytes txt file and when i open the contents of the txt file, there are my infos plus alot of square boxes. Here is my code from the sender: string fileName = @"SendTest.txt"; System.Uri uri = new Uri("obex://" + selectedAddr + "/" + System.IO.Path.GetFileName(fileName)); ObexWebRequest request = new ObexWebRequest(uri); Stream requestStream = request.GetRequestStream(); FileStream fs = File.OpenRead(fileName); byte[] buffer = new byte[1024]; int readBytes = 1; while (readBytes != 0) { readBytes = fs.Read(buffer,0, buffer.Length); requestStream.Write(buffer,0, readBytes); } requestStream.Close(); ObexWebResponse response = (ObexWebResponse)request.GetResponse(); MessageBox.Show(response.StatusCode.ToString()); response.Close(); Any1 knws how do i solve it?

  Read the article

• c++ File input/output

  - by Myx

  Hi: I am trying to read from a file using fgets and sscanf. In my file, I have characters on each line of the while which I wish to put into a vector. So far, I have the following: FILE *fp; fp = fopen(filename, "r"); if(!fp) { fprintf(stderr, "Unable to open file %s\n", filename); return 0; } // Read file int line_count = 0; char buffer[1024]; while(fgets(buffer, 1023, fp)) { // Increment line counter line_count++; char *bufferp = buffer; ... while(*bufferp != '\n') { char *tmp; if(sscanf(bufferp, "%c", tmp) != 1) { fprintf(stderr, "Syntax error reading axiom on " "line %d in file %s\n", line_count, filename); return 0; } axiom.push_back(tmp); printf("put %s in axiom vector\n", axiom[axiom.size()-1]); // increment buffer pointer bufferp++; } } my axiom vector is defined as vector<char *> axiom;. When I run my program, I get a seg fault. It happens when I do the sscanf. Any suggestions on what I'm doing wrong?

  Read the article

• Low Level Console Input

  - by Soulseekah

  I'm trying to send commands to to the input of a cmd.exe application using the low level read/write console functions. I have no trouble reading the text (scraping) using the ReadConsole...() and WriteConsole() functions after having attached to the process console, but I've not figured out how to write for example "dir" and have the console interpret it as a sent command. Here's a bit of my code: CreateProcess(NULL, "cmd.exe", NULL, NULL, FALSE, CREATE_NEW_CONSOLE, NULL, NULL, &si, &pi); AttachConsole(pi.dwProcessId); strcpy(buffer, "dir"); WriteConsole(GetStdHandle(STD_INPUT_HANDLE), buffer, strlen(buffer), &charRead, NULL); STARTUPINFO attributes of the process are all set to zero, except, of course, the .cb attribute. Nothing changes on the screen, however I'm getting an Error 6: Invalid Handle returned from WriteConsole to STD_INPUT_HANDLE. If I write to (STD_OUTPUT_HANDLE) I do get my dir written on the screen, but nothing of course happens. I'm guessing SetConsoleMode() might be of help, but I've tried many mode combinations, nothing helped. I've also created a quick console application that waits for input (scanf()) and echoes back whatever goes in, didn't work. I've also tried typing into the scanf() promp and then peek into the input buffer using PeekConsoleInput(), returns 0, but the INPUT_RECORD array is empty. I'm aware that there is another way around this using WriteConsoleInput() to directly inject INPUT_RECORD structured events into the console, but this would be way too long, I'll have to send each keypress into it. I hope the question is clear. Please let me know if you need any further information. Thanks for your help.

  Read the article

• Modify existing struct alignment in Visual C++

  - by Crend King

  Is there a way to modify the member alignment of an existing struct in Visual C++? Here is the background: I use an 3rd-party library, which uses several structs. To fill up the structs, I pass the address of the struct instance to some functions. Unfortunately, the functions only returns unaligned buffer, so that data of some members are always wrong. /Zp is out of choice, since it breaks the other parts of the program. I know #pragma pack modifies the alignment of the following struct, but I do not want to copy the structs into my code, for the definitions in the library might change in the future. Sample code: test.h: struct am_aligned { BYTE data1[10]; ULONG data2; }; test.cpp: include "test.h" // typedef alignment(1) struct am_aligned am_unaligned int APIENTRY wWinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPTSTR lpCmdLine, int nCmdShow) { char buffer[20] = {}; for (int i = 0; i < sizeof(unaligned_struct); i++) { buffer[i] = i; } am_aligned instance = *(am_aligned*) buffer; return 0; } instance.data2 is 0x0f0e0d0c, while 0x0d0c0b0a is desired. The commented line does not work of course. Thanks for help!

  Read the article

• problem with kCFSocketReadCallBack

  - by zp26

  Hello. I have a problem with my program. I created a socket with "kCFSocketReadCallBack. My intention was to call the "acceptCallback" only when it receives a string to the socket. Instead my program does not just accept the connection always goes into "startReceive" stop doing so and sometimes crash the program. Can anybody help? Thanks readSocket = CFSocketCreateWithNative( NULL, fd, kCFSocketReadCallBack, AcceptCallback, &context ); static void AcceptCallback(CFSocketRef s, CFSocketCallBackType type, CFDataRef address, const void *data, void *info) // Called by CFSocket when someone connects to our listening socket. // This implementation just bounces the request up to Objective-C. { ServerVistaController * obj; #pragma unused(address) // assert(address == NULL); assert(data != NULL); obj = (ServerVistaController *) info; assert(obj != nil); #pragma unused(s) assert(s == obj->listeningSocket); if (type & kCFSocketAcceptCallBack){ [obj acceptConnection:*(int *)data]; } if (type & kCFSocketAcceptCallBack){ [obj startReceive:*(int *)data]; } } -(void)startReceive:(int)fd { CFReadStreamRef readStream = NULL; CFIndex bytes; UInt8 buffer[MAXLENGTH]; CFStreamCreatePairWithSocket( kCFAllocatorDefault, fd, &readStream, NULL); if(!readStream){ close(fd); [self updateLabel:@"No readStream"]; } CFReadStreamOpen(readStream); [self updateLabel:@"OpenStream"]; bytes = CFReadStreamRead( readStream, buffer, sizeof(buffer)); if (bytes < 0) { [self updateLabel:(NSString*)buffer]; close(fd); } CFReadStreamClose(readStream); }

  Read the article

• How to limit TCP writes to particular size and then block untlil the data is read

  - by ustulation

  {Qt 4.7.0 , VS 2010} I have a Server written in Qt and a 3rd party client executable. Qt based server uses QTcpServer and QTcpSocket facilities (non-blocking). Going through the articles on TCP I understand the following: the original implementation of TCP mentioned the negotiable window size to be a 16-bit value, thus maximum being 65535 bytes. But implementations often used the RFC window-scale-extension that allows the sliding window size to be scalable by bit-shifting to yield a maximum of 1 gigabyte. This is implementation defined. This could have resulted in majorly different window sizes on receiver and sender end as the server uses Qt facilities without hardcoding any window size limit. Client 1st asks for all information it can based on the previous messages from the server before handling the new (accumulating) incoming messages. So at some point Server receives a lot of messages each asking for data of several MB's. This the server processes and puts it into the sender buffer. Client however is unable to handle the messages at the same pace and it seems that client’s receiver buffer is far smaller (65535 bytes maybe) than sender’s transmit window size. The messages thus get accumulated at sender’s end until the sender’s buffer is full too after which the TCP writes on sender would block. This however does not happen as sender buffer is much larger. Hence this manifests as increase in memory consumption on the sender’s end. To prevent this from happening, I used Qt’s socket’s waitForBytesWritten() with timeout set to -1 for infinite waiting period. This as I see from the behaviour blocks the thread writing TCP data until the data has actually been sensed by the receiver’s window (which will happen when earlier messages have been processed by the client at application level). This has caused memory consumption at Server end to be almost negligible. is there a better alternative to this (in Qt) if i want to restrict the memory consumption at server end to say x MB's? Also please point out if any of my understandings is incorrect.

  Read the article

• How to backup using backup API's in c++

  - by user1603185

  I am writing an application that used to backup some specified file, therefore using the backup API calls i.e CreateFile BackupRead and WriteFile API's. getting errors Access violation reading location. I have attached code below. #include <windows.h> int main() { HANDLE hInput, hOutput; //m_filename is a variable holding the file path to read from hInput = CreateFile(L"C:\\Key.txt", GENERIC_READ, 0, NULL, OPEN_EXISTING, FILE_FLAG_BACKUP_SEMANTICS, NULL); //strLocation contains the path of the file I want to create. hOutput= CreateFile(L"C:\\tmp\\", GENERIC_WRITE, NULL, NULL, CREATE_ALWAYS, NULL, NULL); DWORD dwBytesToRead = 1024 * 1024 * 10; BYTE *buffer; buffer = new BYTE[dwBytesToRead]; BOOL bReadSuccess = false,bWriteSuccess = false; DWORD dwBytesRead,dwBytesWritten; LPVOID lpContext; //Now comes the important bit: do { bReadSuccess = BackupRead(hInput, buffer, sizeof(BYTE) *dwBytesToRead, &dwBytesRead, false, true, &lpContext); bWriteSuccess= WriteFile(hOutput, buffer, sizeof(BYTE) *dwBytesRead, &dwBytesWritten, NULL); }while(dwBytesRead == dwBytesToRead); return 0; } Any one suggest me how to use these API's? Thanks.

  Read the article

• Strange compiler complaint when using similar code

  - by Jason

  For a project, I have to ask the user for a file name, and I'm reading it in character by character using getchar. From the main, I call the function char *coursename= introPrint(); //start off to print the usage directions and get the first bit of input. That function is defined as char *introPrint(){ int size= 20; int c; int length=0; char buffer[size]; //instructions printout, cut for brevity //get coursename from user and return it while ( (c=getchar()) != EOF && (c != '\n') ){ buffer[length++]= c; if (length==size-1) break; } buffer[length]=0; return buffer; } This is basically identical code I wrote to ask the user for input, replace the character echo with asterisks, then print out the results. Here, though, I'm getting a function returns address of local variable warning for the return statement. So why am I getting no warnings from the other program, but trigger one for this code?

  Read the article

• GetLongPathName Undeclared

  - by iwizardpro

  When I try to compile my code with the function GetLongPathName(), the compiler tells me that the function is undeclared. I have already read the MSDN documentation located @ http://msdn.microsoft.com/en-us/library/aa364980%28VS.85%29.aspx. But, even though I included those header files, I am still getting the undeclared function error. Which header file(s) am I supposed to include when using the function? #include <Windows.h> #include <WinBase.h> #define DLLEXPORT extern "C" __declspec(dllexport) DLLEXPORT char* file_get_long(char* path_original) { long length = 0; TCHAR* buffer = NULL; if(!path_original) { return "-10"; } length = GetLongPathName(path_original, NULL, 0); if(length == 0) { return "-10"; } buffer = new TCHAR[length]; length = GetLongPathName(path_original, buffer, length); if(length == 0) { return "-10"; } return buffer; } And, if it makes a difference, I am currently compiling using Dev-C++ on a Windows Vista 64-bit.

  Read the article

• Java: Inputting text from a file using split

  - by 00PS

  I am inputting an adjacency list for a graph. There are three columns of data (vertex, destination, edge) separated by a single space. Here is my implementation so far: FileStream in = new FileStream("input1.txt"); Scanner s = new Scanner(in); String buffer; String [] line = null; while (s.hasNext()) { buffer = s.nextLine(); line = buffer.split("\\s+"); g.add(line[0]); System.out.println("Added vertex " + line[0] + "."); g.addEdge(line[0], line[1], Integer.parseInt(line[2])); System.out.println("Added edge from " + line[0] + " to " + line[1] + " with a weight of " + Integer.parseInt(line[2]) + "."); } System.out.println("Size of graph = " + g.size()); Here is the output: Added vertex a. Added edge from a to b with a weight of 9. Exception in thread "main" java.lang.NullPointerException at structure5.GraphListDirected.addEdge(GraphListDirected.java:93) at Driver.main(Driver.java:28) I was under the impression that line = buffer.split("\\s+"); would return a 2 dimensional array of Strings to the variable line. It seemed to work the first time but not the second. Any thoughts? I would also like some feedback on my implementation of this problem. Is there a better way? Anything to help out a novice! :)

  Read the article

• i not find how in powershell pass through http autentification then use a webservices (lotus/domino)

  - by user1716616

  We have here a domino/lotus webservices i want use with powershell. probleme is in front of webservices lotus admin ask a http autentification. how i can use this webservice?? here what i tryed first scrap the first page and get cookie. $url = "http://xxxxxxx/names.nsf?Login" $CookieContainer = New-Object System.Net.CookieContainer $postData = "Username=web.services&Password=jesuisunestar" $buffer = [text.encoding]::ascii.getbytes($postData) [net.httpWebRequest] $req = [net.webRequest]::create($url) $req.method = "POST" $req.Accept = "text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8" $req.Headers.Add("Accept-Language: en-US") $req.Headers.Add("Accept-Encoding: gzip,deflate") $req.Headers.Add("Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7") $req.AllowAutoRedirect = $false $req.ContentType = "application/x-www-form-urlencoded" $req.ContentLength = $buffer.length $req.TimeOut = 50000 $req.KeepAlive = $true $req.Headers.Add("Keep-Alive: 300"); $req.CookieContainer = $CookieContainer $reqst = $req.getRequestStream() $reqst.write($buffer, 0, $buffer.length) $reqst.flush() $reqst.close() [net.httpWebResponse] $res = $req.getResponse() $resst = $res.getResponseStream() $sr = new-object IO.StreamReader($resst) $result = $sr.ReadToEnd() this seem work but now no idea how i can use cookie with a webservicesproxy??? ps: i success have this to work with c# + visualstudio (just the class reference is autobuilt and i don't understand half of this but it allow me to use .CookieContenaire on the generated webservice )

  Read the article

• how to tune BufferedInputStream read()?

  - by technomax

  I am reading a BLOB column from a Oracle database, then writing it to a file as follows: public static int execute(String filename, BLOB blob) { int success = 1; try { File blobFile = new File(filename); FileOutputStream outStream = new FileOutputStream(blobFile); BufferedInputStream inStream = new BufferedInputStream(blob.getBinaryStream()); int length = -1; int size = blob.getBufferSize(); byte[] buffer = new byte[size]; while ((length = inStream.read(buffer)) != -1) { outStream.write(buffer, 0, length); outStream.flush(); } inStream.close(); outStream.close(); } catch (Exception e) { e.printStackTrace(); System.out.println("ERROR(img_exportBlob) Unable to export:"+filename); success = 0; } } The file size is around 3MB and it takes 40-50s to read the buffer. Its actually a 3D image data. So, is there any way by which I can reduce this time?

  Read the article

• High Load mysql on Debian server stops every day. Why?

  - by Oleg Abrazhaev

  I have Debian server with 32 gb memory. And there is apache2, memcached and nginx on this server. Memory load always on maximum. Only 500m free. Most memory leak do MySql. Apache only 70 clients configured, other services small memory usage. When mysql use all memory it stops. And nothing works, need mysql reboot. Mysql configured use maximum 24 gb memory. I have hight weight InnoDB bases. (400000 rows, 30 gb). And on server multithread daemon, that makes many inserts in this tables, thats why InnoDB. There is my mysql config. [mysqld] # # * Basic Settings # default-time-zone = "+04:00" user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking default-time-zone='Europe/Moscow' # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. # # * Fine Tuning # #low_priority_updates = 1 concurrent_insert = ALWAYS wait_timeout = 600 interactive_timeout = 600 #normal key_buffer_size = 2024M #key_buffer_size = 1512M #70% hot cache key_cache_division_limit= 70 #16-32 max_allowed_packet = 32M #1-16M thread_stack = 8M #40-50 thread_cache_size = 50 #orderby groupby sort sort_buffer_size = 64M #same myisam_sort_buffer_size = 400M #temp table creates when group_by tmp_table_size = 3000M #tables in memory max_heap_table_size = 3000M #on disk open_files_limit = 10000 table_cache = 10000 join_buffer_size = 5M # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #myisam_use_mmap = 1 max_connections = 200 thread_concurrency = 8 # # * Query Cache Configuration # #more ignored query_cache_limit = 50M query_cache_size = 210M #on query cache query_cache_type = 1 # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. #log = /var/log/mysql/mysql.log # # Error logging goes to syslog. This is a Debian improvement :) # # Here you can see queries with especially long duration log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 1 log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log server-id = 1 log-bin = /var/lib/mysql/mysql-bin #replicate-do-db = gate log-bin-index = /var/lib/mysql/mysql-bin.index log-error = /var/lib/mysql/mysql-bin.err relay-log = /var/lib/mysql/relay-bin relay-log-info-file = /var/lib/mysql/relay-bin.info relay-log-index = /var/lib/mysql/relay-bin.index binlog_do_db = 24avia expire_logs_days = 10 max_binlog_size = 100M read_buffer_size = 4024288 innodb_buffer_pool_size = 5000M innodb_flush_log_at_trx_commit = 2 innodb_thread_concurrency = 8 table_definition_cache = 2000 group_concat_max_len = 16M #binlog_do_db = gate #binlog_ignore_db = include_database_name # # * BerkeleyDB # # Using BerkeleyDB is now discouraged as its support will cease in 5.1.12. #skip-bdb # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # You might want to disable InnoDB to shrink the mysqld process by circa 100MB. #skip-innodb # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 500M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 32M key_buffer_size = 512M # # * NDB Cluster # # See /usr/share/doc/mysql-server-*/README.Debian for more information. # # The following configuration is read by the NDB Data Nodes (ndbd processes) # not from the NDB Management Nodes (ndb_mgmd processes). # # [MYSQL_CLUSTER] # ndb-connectstring=127.0.0.1 # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ Please, help me make it stable. Memory used /etc/mysql # free total used free shared buffers cached Mem: 32930800 32766424 164376 0 139208 23829196 -/+ buffers/cache: 8798020 24132780 Swap: 33553328 44660 33508668 Maybe my problem not in memory, but MySQL stops every day. As you can see, cache memory free 24 gb. Thank to Michael Hampton? for correction. Load overage on server 3.5. Maybe hdd or another problem? Maybe my config not optimal for 30gb InnoDB ? I'm already try mysqltuner and tunung-primer.sh , but they marked all green. Mysqltuner output mysqltuner >> MySQLTuner 1.0.1 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.5.24-9-log [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in MyISAM tables: 112G (Tables: 1528) [--] Data in InnoDB tables: 39G (Tables: 340) [--] Data in PERFORMANCE_SCHEMA tables: 0B (Tables: 17) [!!] Total fragmented tables: 344 -------- Performance Metrics ------------------------------------------------- [--] Up for: 8h 18m 33s (14M q [478.333 qps], 259K conn, TX: 9B, RX: 5B) [--] Reads / Writes: 84% / 16% [--] Total buffers: 10.5G global + 81.1M per thread (200 max threads) [OK] Maximum possible memory usage: 26.3G (83% of installed RAM) [OK] Slow queries: 1% (259K/14M) [!!] Highest connection usage: 100% (201/200) [OK] Key buffer size / total MyISAM indexes: 1.5G/5.6G [OK] Key buffer hit rate: 100.0% (6B cached / 1M reads) [OK] Query cache efficiency: 74.3% (8M cached / 11M selects) [OK] Query cache prunes per day: 0 [OK] Sorts requiring temporary tables: 0% (0 temp sorts / 247K sorts) [!!] Joins performed without indexes: 106025 [!!] Temporary tables created on disk: 49% (351K on disk / 715K total) [OK] Thread cache hit rate: 99% (249 created / 259K connections) [!!] Table cache hit rate: 15% (2K open / 13K opened) [OK] Open file limit used: 15% (3K/20K) [OK] Table locks acquired immediately: 99% (4M immediate / 4M locks) [!!] InnoDB data size / buffer pool: 39.4G/5.9G -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Reduce or eliminate persistent connections to reduce connection usage Adjust your join queries to always utilize indexes Temporary table size is already large - reduce result set size Reduce your SELECT DISTINCT queries without LIMIT clauses Increase table_cache gradually to avoid file descriptor limits Variables to adjust: max_connections (> 200) wait_timeout (< 600) interactive_timeout (< 600) join_buffer_size (> 5.0M, or always use indexes with joins) table_cache (> 10000) innodb_buffer_pool_size (>= 39G) Mysql primer output -- MYSQL PERFORMANCE TUNING PRIMER -- - By: Matthew Montgomery - MySQL Version 5.5.24-9-log x86_64 Uptime = 0 days 8 hrs 20 min 50 sec Avg. qps = 478 Total Questions = 14369568 Threads Connected = 16 Warning: Server has not been running for at least 48hrs. It may not be safe to use these recommendations To find out more information on how each of these runtime variables effects performance visit: http://dev.mysql.com/doc/refman/5.5/en/server-system-variables.html Visit http://www.mysql.com/products/enterprise/advisors.html for info about MySQL's Enterprise Monitoring and Advisory Service SLOW QUERIES The slow query log is enabled. Current long_query_time = 1.000000 sec. You have 260626 out of 14369701 that take longer than 1.000000 sec. to complete Your long_query_time seems to be fine BINARY UPDATE LOG The binary update log is enabled Binlog sync is not enabled, you could loose binlog records during a server crash WORKER THREADS Current thread_cache_size = 50 Current threads_cached = 45 Current threads_per_sec = 0 Historic threads_per_sec = 0 Your thread_cache_size is fine MAX CONNECTIONS Current max_connections = 200 Current threads_connected = 11 Historic max_used_connections = 201 The number of used connections is 100% of the configured maximum. You should raise max_connections INNODB STATUS Current InnoDB index space = 214 M Current InnoDB data space = 39.40 G Current InnoDB buffer pool free = 0 % Current innodb_buffer_pool_size = 5.85 G Depending on how much space your innodb indexes take up it may be safe to increase this value to up to 2 / 3 of total system memory MEMORY USAGE Max Memory Ever Allocated : 23.46 G Configured Max Per-thread Buffers : 15.84 G Configured Max Global Buffers : 7.54 G Configured Max Memory Limit : 23.39 G Physical Memory : 31.40 G Max memory limit seem to be within acceptable norms KEY BUFFER Current MyISAM index space = 5.61 G Current key_buffer_size = 1.47 G Key cache miss rate is 1 : 5578 Key buffer free ratio = 77 % Your key_buffer_size seems to be fine QUERY CACHE Query cache is enabled Current query_cache_size = 200 M Current query_cache_used = 101 M Current query_cache_limit = 50 M Current Query cache Memory fill ratio = 50.59 % Current query_cache_min_res_unit = 4 K MySQL won't cache query results that are larger than query_cache_limit in size SORT OPERATIONS Current sort_buffer_size = 64 M Current read_rnd_buffer_size = 256 K Sort buffer seems to be fine JOINS Current join_buffer_size = 5.00 M You have had 106606 queries where a join could not use an index properly You have had 8 joins without keys that check for key usage after each row join_buffer_size >= 4 M This is not advised You should enable "log-queries-not-using-indexes" Then look for non indexed joins in the slow query log. OPEN FILES LIMIT Current open_files_limit = 20210 files The open_files_limit should typically be set to at least 2x-3x that of table_cache if you have heavy MyISAM usage. Your open_files_limit value seems to be fine TABLE CACHE Current table_open_cache = 10000 tables Current table_definition_cache = 2000 tables You have a total of 1910 tables You have 2151 open tables. The table_cache value seems to be fine TEMP TABLES Current max_heap_table_size = 2.92 G Current tmp_table_size = 2.92 G Of 366426 temp tables, 49% were created on disk Perhaps you should increase your tmp_table_size and/or max_heap_table_size to reduce the number of disk-based temporary tables Note! BLOB and TEXT columns are not allow in memory tables. If you are using these columns raising these values might not impact your ratio of on disk temp tables. TABLE SCANS Current read_buffer_size = 3 M Current table scan ratio = 2846 : 1 read_buffer_size seems to be fine TABLE LOCKING Current Lock Wait ratio = 1 : 185 You may benefit from selective use of InnoDB. If you have long running SELECT's against MyISAM tables and perform frequent updates consider setting 'low_priority_updates=1'

  Read the article

• Delphi hook to redirect to different ip

  - by Chris

  What is the best way to redirect ANY browser to a different ip for specific sites? For example if the user will type www.facebook.com in any browser he will be redirected to 127.0.0.1. Also the same should happen if he will type 66.220.146.11. What I have until now is this: using the winpkfilter I am able to intercept all the traffic on port 80, with type(in or out), source ip, destination ip and packet. My problem is to modify somehow the packet so the browser will be redirected. This is the code that i have right now: program Pass; {$APPTYPE CONSOLE} uses SysUtils, Windows, Winsock, winpkf, iphlp; var iIndex, counter : DWORD; hFilt : THANDLE; Adapts : TCP_AdapterList; AdapterMode : ADAPTER_MODE; Buffer, ParsedBuffer : INTERMEDIATE_BUFFER; ReadRequest : ETH_REQUEST; hEvent : THANDLE; hAdapter : THANDLE; pEtherHeader : TEtherHeaderPtr; pIPHeader : TIPHeaderPtr; pTcpHeader : TTCPHeaderPtr; pUdpHeader : TUDPHeaderPtr; SourceIP, DestIP : TInAddr; thePacket : PChar; f : TextFile; SourceIpString, DestinationIpString : string; SourceName, DestinationName : string; function IPAddrToName(IPAddr : string) : string; var SockAddrIn : TSockAddrIn; HostEnt : PHostEnt; WSAData : TWSAData; begin WSAStartup($101, WSAData); SockAddrIn.sin_addr.s_addr := inet_addr(PChar(IPAddr)); HostEnt := gethostbyaddr(@SockAddrIn.sin_addr.S_addr, 4, AF_INET); if HostEnt < nil then begin result := StrPas(Hostent^.h_name) end else begin result := ''; end; end; procedure ReleaseInterface(); begin // Restore default mode AdapterMode.dwFlags := 0; AdapterMode.hAdapterHandle := hAdapter; SetAdapterMode(hFilt, @AdapterMode); // Set NULL event to release previously set event object SetPacketEvent(hFilt, hAdapter, 0); // Close Event if hEvent < 0 then CloseHandle(hEvent); // Close driver object CloseFilterDriver(hFilt); // Release NDISAPI FreeNDISAPI(); end; begin // Check the number of parameters if ParamCount() < 2 then begin Writeln('Command line syntax:'); Writeln(' PassThru.exe index num'); Writeln(' index - network interface index.'); Writeln(' num - number or packets to filter'); Writeln('You can use ListAdapters to determine correct index.'); Exit; end; // Initialize NDISAPI InitNDISAPI(); // Create driver object hFilt := OpenFilterDriver('NDISRD'); if IsDriverLoaded(hFilt) then begin // Get parameters from command line iIndex := StrToInt(ParamStr(1)); counter := StrToInt(ParamStr(2)); // Set exit procedure ExitProcessProc := ReleaseInterface; // Get TCP/IP bound interfaces GetTcpipBoundAdaptersInfo(hFilt, @Adapts); // Check paramer values if iIndex > Adapts.m_nAdapterCount then begin Writeln('There is no network interface with such index on this system.'); Exit; end; hAdapter := Adapts.m_nAdapterHandle[iIndex]; AdapterMode.dwFlags := MSTCP_FLAG_SENT_TUNNEL or MSTCP_FLAG_RECV_TUNNEL; AdapterMode.hAdapterHandle := hAdapter; // Create notification event hEvent := CreateEvent(nil, TRUE, FALSE, nil); if hEvent <> 0 then if SetPacketEvent(hFilt, hAdapter, hEvent) <> 0 then begin // Initialize request ReadRequest.EthPacket.Buffer := @Buffer; ReadRequest.hAdapterHandle := hAdapter; SetAdapterMode(hFilt, @AdapterMode); counter := 0; //while counter <> 0 do while true do begin WaitForSingleObject(hEvent, INFINITE); while ReadPacket(hFilt, @ReadRequest) <> 0 do begin //dec(counter); pEtherHeader := TEtherHeaderPtr(@Buffer.m_IBuffer); if ntohs(pEtherHeader.h_proto) = ETH_P_IP then begin pIPHeader := TIPHeaderPtr(Integer(pEtherHeader) + SizeOf(TEtherHeader)); SourceIP.S_addr := pIPHeader.SourceIp; DestIP.S_addr := pIPHeader.DestIp; if pIPHeader.Protocol = IPPROTO_TCP then begin pTcpHeader := TTCPHeaderPtr(Integer(pIPHeader) + (pIPHeader.VerLen and $F) * 4); if (pTcpHeader.SourcePort = htons(80)) or (pTcpHeader.DestPort = htons(80)) then begin inc(counter); if Buffer.m_dwDeviceFlags = PACKET_FLAG_ON_SEND then Writeln(counter, ') - MSTCP --> Interface') else Writeln(counter, ') - Interface --> MSTCP'); Writeln(' Packet size = ', Buffer.m_Length); Writeln(Format(' IP %.3u.%.3u.%.3u.%.3u --> %.3u.%.3u.%.3u.%.3u PROTOCOL: %u', [byte(SourceIP.S_un_b.s_b1), byte(SourceIP.S_un_b.s_b2), byte(SourceIP.S_un_b.s_b3), byte(SourceIP.S_un_b.s_b4), byte(DestIP.S_un_b.s_b1), byte(DestIP.S_un_b.s_b2), byte(DestIP.S_un_b.s_b3), byte(DestIP.S_un_b.s_b4), byte(pIPHeader.Protocol)] )); Writeln(Format(' TCP SRC PORT: %d DST PORT: %d', [ntohs(pTcpHeader.SourcePort), ntohs(pTcpHeader.DestPort)])); //get the data thePacket := pchar(pEtherHeader) + (sizeof(TEtherHeaderPtr) + pIpHeader.VerLen * 4 + pTcpHeader.Offset * 4); { SourceIpString := IntToStr(byte(SourceIP.S_un_b.s_b1)) + '.' + IntToStr(byte(SourceIP.S_un_b.s_b2)) + '.' + IntToStr(byte(SourceIP.S_un_b.s_b3)) + '.' + IntToStr(byte(SourceIP.S_un_b.s_b4)); DestinationIpString := IntToStr(byte(DestIP.S_un_b.s_b1)) + '.' + IntToStr(byte(DestIP.S_un_b.s_b2)) + '.' + IntToStr(byte(DestIP.S_un_b.s_b3)) + '.' + IntToStr(byte(DestIP.S_un_b.s_b4)); } end; end; end; // if ntohs(pEtherHeader.h_proto) = ETH_P_RARP then // Writeln(' Reverse Addr Res packet'); // if ntohs(pEtherHeader.h_proto) = ETH_P_ARP then // Writeln(' Address Resolution packet'); //Writeln('__'); if Buffer.m_dwDeviceFlags = PACKET_FLAG_ON_SEND then // Place packet on the network interface SendPacketToAdapter(hFilt, @ReadRequest) else // Indicate packet to MSTCP SendPacketToMstcp(hFilt, @ReadRequest); { if counter = 0 then begin Writeln('Filtering complete'); readln; break; end; } end; ResetEvent(hEvent); end; end; end; end.

  Read the article

• scrolling lags in emacs 23.2 with GTK

  - by mefiX

  Hey there, I am using emacs 23.2 with the GTK toolkit. I built emacs from source using the following configure-params: ./configure --prefix=/usr --without-makeinfo --without-sound Which builds emacs with the following configuration: Where should the build process find the source code? /home/****/incoming/emacs-23.2 What operating system and machine description files should Emacs use? `s/gnu-linux.h' and `m/intel386.h' What compiler should emacs be built with? gcc -g -O2 -Wdeclaration-after-statement -Wno-pointer-sign Should Emacs use the GNU version of malloc? yes (Using Doug Lea's new malloc from the GNU C Library.) Should Emacs use a relocating allocator for buffers? yes Should Emacs use mmap(2) for buffer allocation? no What window system should Emacs use? x11 What toolkit should Emacs use? GTK Where do we find X Windows header files? Standard dirs Where do we find X Windows libraries? Standard dirs Does Emacs use -lXaw3d? no Does Emacs use -lXpm? yes Does Emacs use -ljpeg? yes Does Emacs use -ltiff? yes Does Emacs use a gif library? yes -lgif Does Emacs use -lpng? yes Does Emacs use -lrsvg-2? no Does Emacs use -lgpm? yes Does Emacs use -ldbus? yes Does Emacs use -lgconf? no Does Emacs use -lfreetype? yes Does Emacs use -lm17n-flt? no Does Emacs use -lotf? yes Does Emacs use -lxft? yes Does Emacs use toolkit scroll bars? yes When I'm scrolling within files of a common size (about 1000 lines) holding the up/down-keys, emacs almost hangs and produces about 50% CPU-load. I use the following plugins: ido linum tabbar auto-complete-config Starting emacs with -q fixes the problem, but then I don't have any plugins. I can't figure out, which part of my .emacs is responsible for this behaviour. Here's an excerpt of my .emacs-file: (require 'ido) (ido-mode 1) (require 'linum) (global-linum-mode 1) (require 'tabbar) (tabbar-mode 1) (tabbar-local-mode 0) (tabbar-mwheel-mode 0) (setq tabbar-buffer-groups-function (lambda () (list "All"))) (global-set-key [M-left] 'tabbar-backward) (global-set-key [M-right] 'tabbar-forward) ;; hide the toolbar (gtk etc.) (tool-bar-mode -1) ;; Mouse scrolling enhancements (setq mouse-wheel-progressive-speed nil) (setq mouse-wheel-scroll-amount '(5 ((shift) . 5) ((control) . nil))) ;; Smart-HOME (defun smart-beginning-of-line () "Forces the cursor to jump to the first none whitespace char of the current line when pressing HOME" (interactive) (let ((oldpos (point))) (back-to-indentation) (and (= oldpos (point)) (beginning-of-line)))) (put 'smart-beginning-of-line 'CUA 'move) (global-set-key [home] 'smart-beginning-of-line) (custom-set-variables ;; custom-set-variables was added by Custom. ;; If you edit it by hand, you could mess it up, so be careful. ;; Your init file should contain only one such instance. ;; If there is more than one, they won't work right. '(column-number-mode t) '(cua-mode t nil (cua-base)) '(custom-buffer-indent 4) '(delete-selection-mode nil) '(display-time-24hr-format t) '(display-time-day-and-date 1) '(display-time-mode t) '(global-font-lock-mode t nil (font-lock)) '(inhibit-startup-buffer-menu t) '(inhibit-startup-screen t) '(pc-select-meta-moves-sexps t) '(pc-select-selection-keys-only t) '(pc-selection-mode t nil (pc-select)) '(scroll-bar-mode (quote right)) '(show-paren-mode t) '(standard-indent 4) '(uniquify-buffer-name-style (quote forward) nil (uniquify))) (setq-default tab-width 4) (setq-default indent-tabs-mode t) (setq c-basic-offset 4) ;; Highlighting of the current line (global-hl-line-mode 1) (set-face-background 'hl-line "#E8F2FE") (defalias 'yes-or-no-p 'y-or-n-p) (display-time) (set-language-environment "Latin-1") ;; Change cursor color according to mode (setq djcb-read-only-color "gray") ;; valid values are t, nil, box, hollow, bar, (bar . WIDTH), hbar, ;; (hbar. HEIGHT); see the docs for set-cursor-type (setq djcb-read-only-cursor-type 'hbar) (setq djcb-overwrite-color "red") (setq djcb-overwrite-cursor-type 'box) (setq djcb-normal-color "black") (setq djcb-normal-cursor-type 'bar) (defun djcb-set-cursor-according-to-mode () "change cursor color and type according to some minor modes." (cond (buffer-read-only (set-cursor-color djcb-read-only-color) (setq cursor-type djcb-read-only-cursor-type)) (overwrite-mode (set-cursor-color djcb-overwrite-color) (setq cursor-type djcb-overwrite-cursor-type)) (t (set-cursor-color djcb-normal-color) (setq cursor-type djcb-normal-cursor-type)))) (add-hook 'post-command-hook 'djcb-set-cursor-according-to-mode) (define-key global-map '[C-right] 'forward-sexp) (define-key global-map '[C-left] 'backward-sexp) (define-key global-map '[s-left] 'windmove-left) (define-key global-map '[s-right] 'windmove-right) (define-key global-map '[s-up] 'windmove-up) (define-key global-map '[s-down] 'windmove-down) (define-key global-map '[S-down-mouse-1] 'mouse-stay-and-copy) (define-key global-map '[C-M-S-down-mouse-1] 'mouse-stay-and-swap) (define-key global-map '[S-mouse-2] 'mouse-yank-and-kill) (define-key global-map '[C-S-down-mouse-1] 'mouse-stay-and-kill) (define-key global-map "\C-a" 'mark-whole-buffer) (custom-set-faces ;; custom-set-faces was added by Custom. ;; If you edit it by hand, you could mess it up, so be careful. ;; Your init file should contain only one such instance. ;; If there is more than one, they won't work right. '(default ((t (:inherit nil :stipple nil :background "#f7f9fa" :foreground "#191919" :inverse-video nil :box nil :strike-through nil :overline nil :underline nil :slant normal :weight normal :height 98 :width normal :foundry "unknown" :family "DejaVu Sans Mono")))) '(font-lock-builtin-face ((((class color) (min-colors 88) (background light)) (:foreground "#642880" :weight bold)))) '(font-lock-comment-face ((((class color) (min-colors 88) (background light)) (:foreground "#3f7f5f")))) '(font-lock-constant-face ((((class color) (min-colors 88) (background light)) (:weight bold)))) '(font-lock-doc-face ((t (:inherit font-lock-string-face :foreground "#3f7f5f")))) '(font-lock-function-name-face ((((class color) (min-colors 88) (background light)) (:foreground "Black" :weight bold)))) '(font-lock-keyword-face ((((class color) (min-colors 88) (background light)) (:foreground "#7f0055" :weight bold)))) '(font-lock-preprocessor-face ((t (:inherit font-lock-builtin-face :foreground "#7f0055" :weight bold)))) '(font-lock-string-face ((((class color) (min-colors 88) (background light)) (:foreground "#0000c0")))) '(font-lock-type-face ((((class color) (min-colors 88) (background light)) (:foreground "#7f0055" :weight bold)))) '(font-lock-variable-name-face ((((class color) (min-colors 88) (background light)) (:foreground "Black")))) '(minibuffer-prompt ((t (:foreground "medium blue")))) '(mode-line ((t (:background "#222222" :foreground "White")))) '(tabbar-button ((t (:inherit tabbar-default :foreground "dark red")))) '(tabbar-button-highlight ((t (:inherit tabbar-default :background "white" :box (:line-width 2 :color "white"))))) '(tabbar-default ((t (:background "gray90" :foreground "gray50" :box (:line-width 3 :color "gray90") :height 100)))) '(tabbar-highlight ((t (:underline t)))) '(tabbar-selected ((t (:inherit tabbar-default :foreground "blue" :weight bold)))) '(tabbar-separator ((t nil))) '(tabbar-unselected ((t (:inherit tabbar-default))))) Any suggestions? Kind regards, mefiX

  Read the article

• File using .net sockets, transferring problem

  - by Sergei

  I have a client and server, client sending file to server. When i transfer files on my computer(in local) everything is ok(try to sen file over 700mb). When i try to sent file use Internet to my friend in the end of sending appears error on server "Input string is not in correct format".This error appears in this expression fSize = Convert::ToUInt64(tokenes[0]); - and i don't mind wht it's appear. File should be transfered and wait other transferring ps: sorry for too much code, but i want to find solution private: void CreateServer() { try{ IPAddress ^ipAddres = IPAddress::Parse(ipAdress); listener = gcnew System::Net::Sockets::TcpListener(ipAddres, port); listener->Start(); clientsocket =listener->AcceptSocket(); bool keepalive = true; array<wchar_t,1> ^split = gcnew array<wchar_t>(1){ '\0' }; array<wchar_t,1> ^split2 = gcnew array<wchar_t>(1){ '|' }; statusBar1->Text = "Connected" ; // while (keepalive) { array<Byte>^ size1 = gcnew array<Byte>(1024); clientsocket->Receive(size1); System::String ^notSplited = System::Text::Encoding::GetEncoding(1251)->GetString(size1); array<String^> ^ tokenes = notSplited->Split(split2); System::String ^fileName = tokenes[1]->ToString(); statusBar1->Text = "Receiving file" ; unsigned long fSize = 0; //IN THIS EXPRESSIN APPEARS ERROR fSize = Convert::ToUInt64(tokenes[0]); if (!Directory::Exists("Received")) Directory::CreateDirectory("Received"); System::String ^path = "Received\\"+ fileName; while (File::Exists(path)) { int dotPos = path->LastIndexOf('.'); if (dotPos == -1) { path += "[1]"; } else { path = path->Insert(dotPos, "[1]"); } } FileStream ^fs = gcnew FileStream(path, FileMode::CreateNew, FileAccess::Write); BinaryWriter ^f = gcnew BinaryWriter(fs); //bytes received unsigned long processed = 0; pBarFilesTr->Visible = true; pBarFilesTr->Minimum = 0; pBarFilesTr->Maximum = (int)fSize; // Set the initial value of the ProgressBar. pBarFilesTr->Value = 0; pBarFilesTr->Step = 1024; //loop for receive file array<Byte>^ buffer = gcnew array<Byte>(1024); while (processed < fSize) { if ((fSize - processed) < 1024) { int bytes ; array<Byte>^ buf = gcnew array<Byte>(1024); bytes = clientsocket->Receive(buf); if (bytes != 0) { f->Write(buf, 0, bytes); processed = processed + (unsigned long)bytes; pBarFilesTr->PerformStep(); } break; } else { int bytes = clientsocket->Receive(buffer); if (bytes != 0) { f->Write(buffer, 0, 1024); processed = processed + 1024; pBarFilesTr->PerformStep(); } else break; } } statusBar1->Text = "File was received" ; array<Byte>^ buf = gcnew array<Byte>(1); clientsocket->Send(buf,buf->Length,SocketFlags::None); f->Close(); fs->Close(); SystemSounds::Beep->Play(); } }catch(System::Net::Sockets::SocketException ^es) { MessageBox::Show(es->ToString()); } catch(System::Exception ^es) { MessageBox::Show(es->ToString()); } } private: void CreateClient() { clientsock = gcnew System::Net::Sockets::TcpClient(ipAdress, port); ns = clientsock->GetStream(); sr = gcnew StreamReader(ns); statusBar1->Text = "Connected" ; } private:void Send() { try{ OpenFileDialog ^openFileDialog1 = gcnew OpenFileDialog(); System::String ^filePath = ""; System::String ^fileName = ""; //file choose dialog if (openFileDialog1->ShowDialog() == System::Windows::Forms::DialogResult::OK) { filePath = openFileDialog1->FileName; fileName = openFileDialog1->SafeFileName; } else { MessageBox::Show("You must select a file", "Error", MessageBoxButtons::OK, MessageBoxIcon::Exclamation); return; } statusBar1->Text = "Sending file" ; NetworkStream ^writerStream = clientsock->GetStream(); System::Runtime::Serialization::Formatters::Binary::BinaryFormatter ^format = gcnew System::Runtime::Serialization::Formatters::Binary::BinaryFormatter(); array<Byte>^ buffer = gcnew array<Byte>(1024); FileStream ^fs = gcnew FileStream(filePath, FileMode::Open); BinaryReader ^br = gcnew BinaryReader(fs); //file size unsigned long fSize = (unsigned long)fs->Length; //transfer file size + name bFSize = Encoding::GetEncoding(1251)->GetBytes(Convert::ToString(fs->Length+"|"+fileName+"|")); writerStream->Write(bFSize, 0, bFSize->Length); //status bar pBarFilesTr->Visible = true; pBarFilesTr->Minimum = 0; pBarFilesTr->Maximum = (int)fSize; pBarFilesTr->Value = 0; // Set the initial value of the ProgressBar. pBarFilesTr->Step = 1024; //bytes transfered unsigned long processed = 0; int bytes = 1024; //loop for transfer while (processed < fSize) { if ((fSize - processed) < 1024) { bytes = (int)(fSize - processed); array<Byte>^ buf = gcnew array<Byte>(bytes); br->Read(buf, 0, bytes); writerStream->Write(buf, 0, buf->Length); pBarFilesTr->PerformStep(); processed = processed + (unsigned long)bytes; break; } else { br->Read(buffer, 0, 1024); writerStream->Write(buffer, 0, buffer->Length); pBarFilesTr->PerformStep(); processed = processed + 1024; } } array<Byte>^ bufsss = gcnew array<Byte>(100); writerStream->Read(bufsss,0,bufsss->Length); statusBar1->Text = "File was sent" ; btnSend->Enabled = true; fs->Close(); br->Close(); SystemSounds::Beep->Play(); newThread->Abort(); } catch(System::Net::Sockets::SocketException ^es) { MessageBox::Show(es->ToString()); } } UPDATE: ok, i can add checking if clientsocket->Receive(size1); equal zero, but why he begin receiving data again , in the ending of receiving. UPDATE:After adding this checking problem remains. AND WIN RAR SAY TO OPENING ARCHIVE - unexpected end of file! UPDATE:http://img153.imageshack.us/img153/3760/erorr.gif I think it continue receiving some bytes from client(that remains in the stream), but why existes cicle while (processed < fSize)

  Read the article

• File using sockets .net, tranfering problem

  - by Sergei

  I have a client and server, client sending file to server. When i transfer files on my computer(in local) everything is ok(try to sen file over 700mb). When i try to sent file use Internet to my friend in the end of sending appears error on server "Input string is not in correct format".This error appears in this expression fSize = Convert::ToUInt64(tokenes[0]); - and i don't mind wht it's appear. File should be transfered and wait other transferring ps: sorry for too much code, but i want to find solution private: void CreateServer() { try{ IPAddress ^ipAddres = IPAddress::Parse(ipAdress); listener = gcnew System::Net::Sockets::TcpListener(ipAddres, port); listener->Start(); clientsocket =listener->AcceptSocket(); bool keepalive = true; array<wchar_t,1> ^split = gcnew array<wchar_t>(1){ '\0' }; array<wchar_t,1> ^split2 = gcnew array<wchar_t>(1){ '|' }; statusBar1->Text = "Connected" ; // while (keepalive) { array<Byte>^ size1 = gcnew array<Byte>(1024); clientsocket->Receive(size1); System::String ^notSplited = System::Text::Encoding::GetEncoding(1251)->GetString(size1); array<String^> ^ tokenes = notSplited->Split(split2); System::String ^fileName = tokenes[1]->ToString(); statusBar1->Text = "Receiving file" ; unsigned long fSize = 0; //IN THIS EXPRESSIN APPEARS ERROR fSize = Convert::ToUInt64(tokenes[0]); if (!Directory::Exists("Received")) Directory::CreateDirectory("Received"); System::String ^path = "Received\\"+ fileName; while (File::Exists(path)) { int dotPos = path->LastIndexOf('.'); if (dotPos == -1) { path += "[1]"; } else { path = path->Insert(dotPos, "[1]"); } } FileStream ^fs = gcnew FileStream(path, FileMode::CreateNew, FileAccess::Write); BinaryWriter ^f = gcnew BinaryWriter(fs); //bytes received unsigned long processed = 0; pBarFilesTr->Visible = true; pBarFilesTr->Minimum = 0; pBarFilesTr->Maximum = (int)fSize; // Set the initial value of the ProgressBar. pBarFilesTr->Value = 0; pBarFilesTr->Step = 1024; //loop for receive file array<Byte>^ buffer = gcnew array<Byte>(1024); while (processed < fSize) { if ((fSize - processed) < 1024) { int bytes ; array<Byte>^ buf = gcnew array<Byte>(1024); bytes = clientsocket->Receive(buf); if (bytes != 0) { f->Write(buf, 0, bytes); processed = processed + (unsigned long)bytes; pBarFilesTr->PerformStep(); } break; } else { int bytes = clientsocket->Receive(buffer); if (bytes != 0) { f->Write(buffer, 0, 1024); processed = processed + 1024; pBarFilesTr->PerformStep(); } else break; } } statusBar1->Text = "File was received" ; array<Byte>^ buf = gcnew array<Byte>(1); clientsocket->Send(buf,buf->Length,SocketFlags::None); f->Close(); fs->Close(); SystemSounds::Beep->Play(); } }catch(System::Net::Sockets::SocketException ^es) { MessageBox::Show(es->ToString()); } catch(System::Exception ^es) { MessageBox::Show(es->ToString()); } } private: void CreateClient() { clientsock = gcnew System::Net::Sockets::TcpClient(ipAdress, port); ns = clientsock->GetStream(); sr = gcnew StreamReader(ns); statusBar1->Text = "Connected" ; } private:void Send() { try{ OpenFileDialog ^openFileDialog1 = gcnew OpenFileDialog(); System::String ^filePath = ""; System::String ^fileName = ""; //file choose dialog if (openFileDialog1->ShowDialog() == System::Windows::Forms::DialogResult::OK) { filePath = openFileDialog1->FileName; fileName = openFileDialog1->SafeFileName; } else { MessageBox::Show("You must select a file", "Error", MessageBoxButtons::OK, MessageBoxIcon::Exclamation); return; } statusBar1->Text = "Sending file" ; NetworkStream ^writerStream = clientsock->GetStream(); System::Runtime::Serialization::Formatters::Binary::BinaryFormatter ^format = gcnew System::Runtime::Serialization::Formatters::Binary::BinaryFormatter(); array<Byte>^ buffer = gcnew array<Byte>(1024); FileStream ^fs = gcnew FileStream(filePath, FileMode::Open); BinaryReader ^br = gcnew BinaryReader(fs); //file size unsigned long fSize = (unsigned long)fs->Length; //transfer file size + name bFSize = Encoding::GetEncoding(1251)->GetBytes(Convert::ToString(fs->Length+"|"+fileName+"|")); writerStream->Write(bFSize, 0, bFSize->Length); //status bar pBarFilesTr->Visible = true; pBarFilesTr->Minimum = 0; pBarFilesTr->Maximum = (int)fSize; pBarFilesTr->Value = 0; // Set the initial value of the ProgressBar. pBarFilesTr->Step = 1024; //bytes transfered unsigned long processed = 0; int bytes = 1024; //loop for transfer while (processed < fSize) { if ((fSize - processed) < 1024) { bytes = (int)(fSize - processed); array<Byte>^ buf = gcnew array<Byte>(bytes); br->Read(buf, 0, bytes); writerStream->Write(buf, 0, buf->Length); pBarFilesTr->PerformStep(); processed = processed + (unsigned long)bytes; break; } else { br->Read(buffer, 0, 1024); writerStream->Write(buffer, 0, buffer->Length); pBarFilesTr->PerformStep(); processed = processed + 1024; } } array<Byte>^ bufsss = gcnew array<Byte>(100); writerStream->Read(bufsss,0,bufsss->Length); statusBar1->Text = "File was sent" ; btnSend->Enabled = true; fs->Close(); br->Close(); SystemSounds::Beep->Play(); newThread->Abort(); } catch(System::Net::Sockets::SocketException ^es) { MessageBox::Show(es->ToString()); } }

  Read the article

• UAT Testing for SOA 10G Clusters

  - by [email protected]

  A lot of customers ask how to verify their SOA clusters and make them production ready. Here is a list that I recommend using for 10G SOA Clusters. v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-CA X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; mso-bidi-font-size:12.0pt; font-family:"Calibri","sans-serif"; mso-fareast-language:EN-US;} Test cases for each component - Oracle Application Server 10G General Application Server test cases This section is going to cover very General test cases to make sure that the Application Server cluster has been set up correctly and if you can start and stop all the components in the server via opmnct and AS Console. Test Case 1 Check if you can see AS instances in the console Implementation 1. Log on to the AS Console --> check to see if you can see all the nodes in your AS cluster. You should be able to see all the Oracle AS instances that are part of the cluster. This means that the OPMN clustering worked and the AS instances successfully joined the AS cluster. Result You should be able to see if all the instances in the AS cluster are listed in the EM console. If the instances are not listed here are the files to check to see if OPMN joined the cluster properly: $ORACLE_HOME\opmn\logs{*}opmn.log*$ORACLE_HOME\opmn\logs{*}opmn.dbg* If OPMN did not join the cluster properly, please check the opmn.xml file to make sure the discovery multicast address and port are correct (see this link  for opmn documentation). Restart the whole instance using opmnctl stopall followed by opmnctl startall. Log on to AS console to see if instance is listed as part of the cluster. Test Case 2 Check to see if you can start/stop each component Implementation Check each OC4J component on each AS instanceStart each and every component through the AS console to see if they will start and stop.Do that for each and every instance. Result Each component should start and stop through the AS console. You can also verify if the component started by checking opmnctl status by logging onto each box associated with the cluster Test Case 3 Add/modify a datasource entry through AS console on a remote AS instance (not on the instance where EM is physically running) Implementation Pick an OC4J instanceCreate a new data-source through the AS consoleModify an existing data-source or connection pool (optional) Result Open $ORACLE_HOME\j2ee\<oc4j_name>\config\data-sources.xml to see if the new (and or the modified) connection details and data-source exist. If they do then the AS console has successfully updated a remote file and MBeans are communicating correctly. Test Case 4 Start and stop AS instances using opmnctl @cluster command Implementation 1. Go to $ORACLE_HOME\opmn\bin and use the opmnctl @cluster to start and stop the AS instances Result Use opmnctl @cluster status to check for start and stop statuses.  HTTP server test cases This section will deal with use cases to test HTTP server failover scenarios. In these examples the HTTP server will be talking to the BPEL console (or any other web application that the client wants), so the URL will be _http://hostname:port\BPELConsole Test Case 1  Shut down one of the HTTP servers while accessing the BPEL console and see the requested routed to the second HTTP server in the cluster Implementation Access the BPELConsoleCheck $ORACLE_HOME\Apache\Apache\logs\access_log --> check for the timestamp and the URL that was accessed by the user. Timestamp and URL would look like this 1xx.2x.2xx.xxx [24/Mar/2009:16:04:38 -0500] "GET /BPELConsole=System HTTP/1.1" 200 15 After you have figured out which HTTP server this is running on, shut down this HTTP server by using opmnctl stopproc --> this is a graceful shutdown.Access the BPELConsole again (please note that you should have a LoadBalancer in front of the HTTP server and configured the Apache Virtual Host, see EDG for steps)Check $ORACLE_HOME\Apache\Apache\logs\access_log --> check for the timestamp and the URL that was accessed by the user. Timestamp and URL would look like above Result Even though you are shutting down the HTTP server the request is routed to the surviving HTTP server, which is then able to route the request to the BPEL Console and you are able to access the console. By checking the access log file you can confirm that the request is being picked up by the surviving node. Test Case 2 Repeat the same test as above but instead of calling opmnctl stopproc, pull the network cord of one of the HTTP servers, so that the LBR routes the request to the surviving HTTP node --> this is simulating a network failure. Test Case 3 In test case 1 we have simulated a graceful shutdown, in this case we will simulate an Apache crash Implementation Use opmnctl status -l to get the PID of the HTTP server that you would like forcefully bring downOn Linux use kill -9 <PID> to kill the HTTP serverAccess the BPEL console Result As you shut down the HTTP server, OPMN will restart the HTTP server. The restart may be so quick that the LBR may still route the request to the same server. One way to check if the HTTP server restared is to check the new PID and the timestamp in the access log for the BPEL console. BPEL test cases This section is going to cover scenarios dealing with BPEL clustering using jGroups, BPEL deployment and testing related to BPEL failover. Test Case 1 Verify that jGroups has initialized correctly. There is no real testing in this use case just a visual verification by looking at log files that jGroups has initialized correctly. Check the opmn log for the BPEL container for all nodes at $ORACLE_HOME/opmn/logs/<group name><container name><group name>~1.log. This logfile will contain jGroups related information during startup and steady-state operation. Soon after startup you should find log entries for UDP or TCP.Example jGroups Log Entries for UDPApr 3, 2008 6:30:37 PM org.collaxa.thirdparty.jgroups.protocols.UDP createSockets ·         INFO: sockets will use interface 144.25.142.172·          ·         Apr 3, 2008 6:30:37 PM org.collaxa.thirdparty.jgroups.protocols.UDP createSockets·          ·         INFO: socket information:·          ·         local_addr=144.25.142.172:1127, mcast_addr=228.8.15.75:45788, bind_addr=/144.25.142.172, ttl=32·         sock: bound to 144.25.142.172:1127, receive buffer size=64000, send buffer size=32000·         mcast_recv_sock: bound to 144.25.142.172:45788, send buffer size=32000, receive buffer size=64000·         mcast_send_sock: bound to 144.25.142.172:1128, send buffer size=32000, receive buffer size=64000·         Apr 3, 2008 6:30:37 PM org.collaxa.thirdparty.jgroups.protocols.TP$DiagnosticsHandler bindToInterfaces·          ·         -------------------------------------------------------·          ·         GMS: address is 144.25.142.172:1127·          ------------------------------------------------------- Example jGroups Log Entries for TCPApr 3, 2008 6:23:39 PM org.collaxa.thirdparty.jgroups.blocks.ConnectionTable start ·         INFO: server socket created on 144.25.142.172:7900·          ·         Apr 3, 2008 6:23:39 PM org.collaxa.thirdparty.jgroups.protocols.TP$DiagnosticsHandler bindToInterfaces·          ·         -------------------------------------------------------·         GMS: address is 144.25.142.172:7900------------------------------------------------------- In the log below the "socket created on" indicates that the TCP socket is established on the own node at that IP address and port the "created socket to" shows that the second node has connected to the first node, matching the logfile above with the IP address and port.Apr 3, 2008 6:25:40 PM org.collaxa.thirdparty.jgroups.blocks.ConnectionTable start ·         INFO: server socket created on 144.25.142.173:7901·          ·         Apr 3, 2008 6:25:40 PM org.collaxa.thirdparty.jgroups.protocols.TP$DiagnosticsHandler bindToInterfaces·          ·         ------------------------------------------------------·         GMS: address is 144.25.142.173:7901·         -------------------------------------------------------·         Apr 3, 2008 6:25:41 PM org.collaxa.thirdparty.jgroups.blocks.ConnectionTable getConnectionINFO: created socket to 144.25.142.172:7900  Result By reviewing the log files, you can confirm if BPEL clustering at the jGroups level is working and that the jGroup channel is communicating. Test Case 2  Test connectivity between BPEL Nodes Implementation Test connections between different cluster nodes using ping, telnet, and traceroute. The presence of firewalls and number of hops between cluster nodes can affect performance as they have a tendency to take down connections after some time or simply block them.Also reference Metalink Note 413783.1: "How to Test Whether Multicast is Enabled on the Network." Result Using the above tools you can confirm if Multicast is working  and whether BPEL nodes are commnunicating. Test Case3 Test deployment of BPEL suitcase to one BPEL node.  Implementation Deploy a HelloWorrld BPEL suitcase (or any other client specific BPEL suitcase) to only one BPEL instance using ant, or JDeveloper or via the BPEL consoleLog on to the second BPEL console to check if the BPEL suitcase has been deployed Result If jGroups has been configured and communicating correctly, BPEL clustering will allow you to deploy a suitcase to a single node, and jGroups will notify the second instance of the deployment. The second BPEL instance will go to the DB and pick up the new deployment after receiving notification. The result is that the new deployment will be "deployed" to each node, by only deploying to a single BPEL instance in the BPEL cluster. Test Case 4  Test to see if the BPEL server failsover and if all asynch processes are picked up by the secondary BPEL instance Implementation Deploy a 2 Asynch process: A ParentAsynch Process which calls a ChildAsynchProcess with a variable telling it how many times to loop or how many seconds to sleepA ChildAsynchProcess that loops or sleeps or has an onAlarmMake sure that the processes are deployed to both serversShut down one BPEL serverOn the active BPEL server call ParentAsynch a few times (use the load generation page)When you have enough ParentAsynch instances shut down this BPEL instance and start the other one. Please wait till this BPEL instance shuts down fully before starting up the second one.Log on to the BPEL console and see that the instance were picked up by the second BPEL node and completed Result The BPEL instance will failover to the secondary node and complete the flow ESB test cases This section covers the use cases involved with testing an ESB cluster. For this section please Normal 0 false false false EN-CA X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; mso-bidi-font-size:12.0pt; font-family:"Calibri","sans-serif"; mso-fareast-language:EN-US;} follow Metalink Note 470267.1 which covers the basic tests to verify your ESB cluster.

  Read the article

• SCOM 2007 versus Zenoss (or other open source)

  - by TheCleaner

  I've taken the liberty to test both SCOM 2007 and Zenoss and found the following: SCOM 2007 Pros: Great MS Windows server monitoring and reporting In-depth configuration and easily integrates into a "MS datacenter" Cons: limited network device monitoring support (without 3rd party plugins) expensive difficult learning curve Zenoss Pros: Open Source (free) decent server monitoring for Windows, great monitoring for Linux decent network device monitoring Cons: not as in-depth as SCOM (for Windows at least) So my question to you folks is this: Given the above, and given that I'm trying to monitor 55 Windows servers, 1 Linux server, 2 ESX servers, and Juniper equipment...which would you recommend?

  Read the article

• mod-rewrite: Replacing some characters in a url

  - by GeorgeCalm

  Is it possible to replace some forward slashes (/) of a URL to dots (.) in a RewriteRule? It doesn't have to be done exclusively with a RewriteRule, but definitely not with a script. Example 1: INPUT: /document/my/document.html OUTPUT: /document-my.document.html Example 2: INPUT: /document/depth/of/path/can/vary.html OUTPUT: /document-depth.of.path.can.vary.html

  Read the article

• Emacs check syntax of file before saving

  - by astropanic

  How I can prevent Emacs from saving my buffer when it contains syntax errors ? It would by especially useful for editing source code. I'm writing some source code into the buffer, hit C-x C-s and Emacs should position the cursor on the line containing the error. I'm correcting the error, hit the save command again, and Emacs should save the file.

  Read the article

• Emacs check syntax of file before saving

  - by astropanic

  How I can prevent Emacs from saving my buffer when it contains syntax errors ? It would by especially useful for editing source code. I'm writing some source code into the buffer, hit C-x C-s and Emacs should position the cursor on the line containing the error. I'm correcting the error, hit the save command again, and Emacs should save the file.

  Read the article

• Command line raw image processing tools in Linux?

  - by ???

  I'm wondering if there is any command to process raw images, for example, cat raw1.img | raw2jpg -w 640 -h 480 -pitch 1024 -pixelformat R8G8B8 and more examples: cat raw1.img raw2.img >y-merge.img tr='transpose -pitch 1024 -depth 24' cat <(cat raw1.img | $tr) <(cat raw2.img | $tr) | transpose -pitch 480 >x-merge.img and something like this: cat gamebitmap.dat | ( w=`readint32` h=`readint32` raw2png -w $w -h $h -depth 24 -pixelformat R8G8B8 ) | png2svg -extractoutline -fuzzy -error 8 -smooth Seems a little tricky, but is it possible? does ImageMagick support such raw formats?

  Read the article

• vim: remove previous code indentation and convert to another

  - by ramgorur

  I have a c project with multiple files (more than 100), the codes are written in Whitesmiths style, but I want to change them into K&R style indentation. Is it possible to do using vim in an automated way ? For example I have a emacs-lisp script to achieve this -- (progn (find-file "{}") (mark-whole-buffer) (setq indent-tabs-mode nil) (untabify (point-min) (point-max)) (indent-region (point-min) (point-max) nil) (save-buffer)) I was wondering if there is a similar trick that could be done with vim.

  Read the article

• Emacs - Disable Some Minibuffer Messages

  - by mellowmaroon

  In Emacs, there are some cases where I would like to prevent messages from appearing in the minibuffer, mainly pertaining to "Beginning/End of buffer" and "Text is read-only". Is there any way I can prevent these messages from appearing in the minibuffer? Also, is there some significant reason I might not want to disable these? At face value, I can just as easily look at the row number and buffer write status on the modeline.

  Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >