Search Results

Search found 2297 results on 92 pages for 'dmi pool'.

Page 51/92 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

  • Nginx + PHP - No input file specified for 1 server block. Other server block works fine

    - by F21
    I am running Ubuntu Desktop 12.04 with nginx 1.2.6. PHP is PHP-FPM 5.4.9. This is the relevant part of my nginx.conf: http { include mime.types; default_type application/octet-stream; sendfile on; keepalive_timeout 65; server { server_name testapp.com; root /www/app/www/; index index.php index.html index.htm; location ~ \.php$ { fastcgi_intercept_errors on; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } server { listen 80 default_server; root /www index index.html index.php; location ~ \.php$ { fastcgi_intercept_errors on; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } } Relevant bits from php-fpm.conf: ; Chroot to this directory at the start. This value must be defined as an ; absolute path. When this value is not set, chroot is not used. ; Note: you can prefix with '$prefix' to chroot to the pool prefix or one ; of its subdirectories. If the pool prefix is not set, the global prefix ; will be used instead. ; Note: chrooting is a great security feature and should be used whenever ; possible. However, all PHP paths will be relative to the chroot ; (error_log, sessions.save_path, ...). ; Default Value: not set ;chroot = ; Chdir to this directory at the start. ; Note: relative path can be used. ; Default Value: current directory or / when chroot chdir = /www In my hosts file, I redirect 2 domains: testapp.com and test.com to 127.0.0.1. My web files are all stored in /www. From the above settings, if I visit test.com/phpinfo.php and test.com/app/www, everything works as expected and I get output from PHP. However, if I visit testapp.com, I get the dreaded No input file specified. error. So, at this point, I pull out the log files and have a look: 2012/12/19 16:00:53 [error] 12183#0: *17 FastCGI sent in stderr: "Unable to open primary script: /www/app/www/index.php (No such file or directory)" while reading response header from upstream, client: 127.0.0.1, server: testapp.com, request: "GET / HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "testapp.com" This baffles me because I have checked again and again and /www/app/www/index.php definitely exists! This is also validated by the fact that test.com/app/www/index.php works which means the file exists and the permissions are correct. Why is this happening and what are the root causes of things breaking for just the testapp.com v-host? Just an update to my investigation: I have commented out chroot and chdir in php-fpm.conf to narrow down the problem If I remove the location ~ \.php$ block for testapp.com, then nginx will send me a bin file which contains the PHP code. This means that on nginx's side, things are fine. The problem is that something must be mangling the file paths when passing it to PHP-FPM. Having said that, it is quite strange that the default_server v-host works fine because its root is /www, where as things just won't work for the testapp.com v-host because the root is /www/app/www.

    Read the article

  • Installation error on Ubuntu 11.10

    - by Abhishek Chanda
    I upgraded to Ubuntu 11.10 and now, when I try to install or uninstall a software, I get this error installArchives() failed: (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 158945 files and directories currently installed.) Removing aisleriot ... Processing triggers for gconf2 ... Processing triggers for man-db ... Processing triggers for hicolor-icon-theme ... Processing triggers for libglib2.0-0 ... Processing triggers for gnome-menus ... Processing triggers for desktop-file-utils ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Setting up flashplugin-downloader (11.0.1.152ubuntu1) ... Downloading... --2012-05-02 18:47:29-- http://archive.canonical.com/pool/partner/a/adobe-flashplugin/adobe-flashplugin_11.0.1.152.orig.tar.gz Resolving archive.canonical.com... 91.189.92.150, 91.189.92.191 Connecting to archive.canonical.com|91.189.92.150|:80... connected. HTTP request sent, awaiting response... 404 Not Found 2012-05-02 18:47:29 ERROR 404: Not Found. download failed The Flash plugin is NOT installed. dpkg: error processing flashplugin-downloader (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of flashplugin-installer: flashplugin-installer depends on flashplugin-downloader (>= 11.0.1.152ubuntu1); however: Package flashplugin-downloader is not configured yet. dpkg: error processing flashplugin-installer (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: flashplugin-downloader flashplugin-installer Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (1) Setting up flashplugin-downloader (11.0.1.152ubuntu1) ... Downloading... --2012-05-02 18:47:33-- http://archive.canonical.com/pool/partner/a/adobe-flashplugin/adobe-flashplugin_11.0.1.152.orig.tar.gz Resolving archive.canonical.com... 91.189.92.191, 91.189.92.150 Connecting to archive.canonical.com|91.189.92.191|:80... connected. HTTP request sent, awaiting response... 404 Not Found 2012-05-02 18:47:34 ERROR 404: Not Found. download failed The Flash plugin is NOT installed. dpkg: error processing flashplugin-downloader (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of flashplugin-installer: flashplugin-installer depends on flashplugin-downloader (>= 11.0.1.152ubuntu1); however: Package flashplugin-downloader is not configured yet. dpkg: error processing flashplugin-installer (--configure): dependency problems - leaving unconfigured This seems to be a bug that has been reported.Does anyone know a workaround?

    Read the article

  • php-fpm + persistent sockets = 502 bad gateway

    - by leeoniya
    Put on your reading glasses - this will be a long-ish one. First, what I'm doing. I'm building a web-app interface for some particularly slow tcp devices. Opening a socket to them takes 200ms and an fwrite/fread cycle takes another 300ms. To reduce the need for both of these actions on each request, I'm opening a persistent tcp socket which reduces the response time by the aforementioned 200ms. I was hoping PHP-FPM would share the persistent connections between requests from different clients (and indeed it does!), but there are some issues which I havent been able to resolve after 2 days of interneting, reading logs and modifying settings. I have somewhat narrowed it down though. Setup: Ubuntu 13.04 x64 Server (fully updated) on Linode PHP 5.5.0-6~raring+1 (fpm-fcgi) nginx/1.5.2 Relevent config: nginx worker_processes 4; php-fpm/pool.d pm = dynamic pm.max_children = 2 pm.start_servers = 2 pm.min_spare_servers = 2 Let's go from coarse to fine detail of what happens. After a fresh start I have 4x nginx processes and 2x php5-fpm processes waiting to handle requests. Then I send requests every couple seconds to the script. The first take a while to open the socket connection and returns with the data in about 500ms, the second returns data in 300ms (yay it's re-using the socket), the third also succeeds in about 300ms, the fourth request = 502 Bad Gateway, same with the 5th. Sixth request once again returns data, except now it took 500ms again. The process repeats for several cycles after which every 4 requests result in 2x 502 Bad Gateways and 2x 500ms Data responses. If I double all the fpm pool values and have 4x php-fpm processes running, the cycles settles in with 4x successful 500ms responses followed by 4x Bad Gateway errors. If I don't use persistent sockets, this issue goes away but then every request is 500ms. What I suspect is happening is the persistent socket keeps each php-fpm process from idling and ties it up, so the next one gets chosen until none are left and as they error out, maybe they are restarted and become available on the next round-robin loop ut the socket dies with the process. I haven't yet checked the 'slowlog', but the nginx error log shows lots of this: *188 recv() failed (104: Connection reset by peer) while reading response header from upstream, client:... All the suggestions on the internet regarding fixing nginx/php-fpm/502 bad gateway relate to high load or fcgi_pass misconfiguration. This is not the case here. Increasing buffers/sizes, changing timeouts, switching from unix socket to tcp socket for fcgi_pass, upping connection limits on the system....none of this stuff applies here. I've had some other success with setting pm = ondemand rather than dynamic, but as soon as the initial fpm-process gets killed off after idling, the persistent socket is gone for all subsequent php-fpm spawns. For the php script, I'm using stream_socket_client() with a STREAM_CLIENT_PERSISTENT flag. A while/stream_select() loop to detect socket data and fread($sock, 4096) to grab the data. I don't call fclose() obviously. If anyone has some additional questions or advice on how to get a persistent socket without tying up the php-fpm processes beyond the request completion, or maybe some other things to try, I'd appreciate it. some useful links: Nginx + php-fpm - recv() error Nginx + php-fpm "504 Gateway Time-out" error with almost zero load (on a test-server) Nginx + PHP-FPM "error 104 Connection reset by peer" causes occasional duplicate posts http://www.linuxquestions.org/questions/programming-9/php-pfsockopen-552084/ http://stackoverflow.com/questions/14268018/concurrent-use-of-a-persistent-php-socket http://devzone.zend.com/303/extension-writing-part-i-introduction-to-php-and-zend/#Heading3 http://stackoverflow.com/questions/242316/how-to-keep-a-php-stream-socket-alive http://php.net/manual/en/install.fpm.configuration.php https://www.google.com/search?q=recv%28%29+failed+%28104:+Connection+reset+by+peer%29+while+reading+response+header+from+upstream+%22502%22&ei=mC1XUrm7F4WQyAHbv4H4AQ&start=10&sa=N&biw=1920&bih=953&dpr=1

    Read the article

  • Cannot create zpool, how to get rid of intel raid volume?

    - by nagylzs
    This is a FreeBSD 9.1 amd64 computer. It has 5 disks installed. The ada0 and ada1 disks are used with a hw raid to provide the root filesystem: root@gw:/home/gandalf # ls /dev | grep ada ada0 ada1 ada2 ada3 ada4 root@gw:/home/gandalf # zpool status pool: zroot state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM zroot ONLINE 0 0 0 raid/r0s1a ONLINE 0 0 0 errors: No known data errors I want to create a raidz pool for the remaining disks: root@gw:/home/gandalf # zpool create -f data raidz1 ada2 ada3 ada4 cannot create 'data': one or more devices is currently unavailable root@gw:/home/gandalf # dmesg | grep ada2 ada2 at ata4 bus 0 scbus6 target 0 lun 0 ada2: <WDC WD20EARS-00MVWB0 51.0AB51> ATA-8 SATA 2.x device ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada2: Previously was known as ad16 root@gw:/home/gandalf # dmesg | grep ada3 ada3 at ata5 bus 0 scbus7 target 0 lun 0 ada3: <SAMSUNG HD103UJ 1AA01118> ATA-7 SATA 2.x device ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada3: 953868MB (1953523055 512 byte sectors: 16H 63S/T 16383C) ada3: Previously was known as ad18 GEOM_RAID: Intel-fb8732fa: Disk ada3 state changed from NONE to ACTIVE. GEOM_RAID: Intel-fb8732fa: Subdisk Volume0:0-ada3 state changed from NONE to ACTIVE. root@gw:/home/gandalf # dmesg | grep ada4 ada4 at ata6 bus 0 scbus8 target 0 lun 0 ada4: <TOSHIBA DT01ACA100 MS2OA750> ATA-8 SATA 3.x device ada4: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada4: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C) ada4: Previously was known as ad20 root@gw:/home/gandalf # dmesg | grep GEOM_RAID Aha, so ada3 is already part of another raid volume? Let's see: root@gw:/home/gandalf # dmesg | grep GEOM_RAID GEOM_RAID: SiI-130628113902: Array SiI-130628113902 created. GEOM_RAID: SiI-130628113902: Disk ada0 state changed from NONE to ACTIVE. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:1-ada0 state changed from NONE to STALE. GEOM_RAID: SiI-130628113902: Disk ada1 state changed from NONE to ACTIVE. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:0-ada1 state changed from NONE to STALE. GEOM_RAID: SiI-130628113902: Array started. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:0-ada1 state changed from STALE to ACTIVE. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:1-ada0 state changed from STALE to RESYNC. GEOM_RAID: SiI-130628113902: Subdisk SiI Raid1 Set:1-ada0 rebuild start at 0. GEOM_RAID: SiI-130628113902: Volume SiI Raid1 Set state changed from STARTING to SUBOPTIMAL. GEOM_RAID: SiI-130628113902: Provider raid/r0 for volume SiI Raid1 Set created. GEOM_RAID: Intel-fb8732fa: Array Intel-fb8732fa created. GEOM_RAID: Intel-fb8732fa: Force array start due to timeout. GEOM_RAID: Intel-fb8732fa: Disk ada3 state changed from NONE to ACTIVE. GEOM_RAID: Intel-fb8732fa: Subdisk Volume0:0-ada3 state changed from NONE to ACTIVE. GEOM_RAID: Intel-fb8732fa: Array started. GEOM_RAID: Intel-fb8732fa: Volume Volume0 state changed from STARTING to DEGRADED. GEOM_RAID: Intel-fb8732fa: Provider raid/r1 for volume Volume0 created. root@gw:/home/gandalf # Yes, indeed. I want to get rid of raid/r1 completely. However, the controller was already set to "IDE" mode in the BIOS. So why it is creating a raid volume??? I have also tried overwritting the first 16k data of ada3 and reboot the computer, but it did not help. How can I delete /dev/raid/r1 ? root@gw:/home/gandalf # graid status Name Status Components raid/r0 SUBOPTIMAL ada0 (ACTIVE (RESYNC 4%)) ada1 (ACTIVE (ACTIVE)) raid/r1 DEGRADED ada3 (ACTIVE (ACTIVE)) root@gw:/home/gandalf # graid delete raid/r1 graid: Array 'raid/r1' not found. root@gw:/home/gandalf # graid delete /dev/raid/r1 graid: Array '/dev/raid/r1' not found. root@gw:/home/gandalf # Thanks

    Read the article

  • OSError : [Errno 38] Function not implemented - Django Celery implementation

    - by Jordan Messina
    I installed django-celery and I tried to start up the worker server but I get an OSError that a function isn't implemented. I'm running CentOS release 5.4 (Final) on a VPS: . broker -> amqp://guest@localhost:5672/ . queues -> . celery -> exchange:celery (direct) binding:celery . concurrency -> 4 . loader -> djcelery.loaders.DjangoLoader . logfile -> [stderr]@WARNING . events -> OFF . beat -> OFF [2010-07-22 17:10:01,364: WARNING/MainProcess] Traceback (most recent call last): [2010-07-22 17:10:01,364: WARNING/MainProcess] File "manage.py", line 11, in <module> [2010-07-22 17:10:01,364: WARNING/MainProcess] execute_manager(settings) [2010-07-22 17:10:01,364: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/django/core/management/__init__.py", line 438, in execute_manager [2010-07-22 17:10:01,364: WARNING/MainProcess] utility.execute() [2010-07-22 17:10:01,364: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/django/core/management/__init__.py", line 379, in execute [2010-07-22 17:10:01,365: WARNING/MainProcess] self.fetch_command(subcommand).run_from_argv(self.argv) [2010-07-22 17:10:01,365: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/django/core/management/base.py", line 191, in run_from_argv [2010-07-22 17:10:01,365: WARNING/MainProcess] self.execute(*args, **options.__dict__) [2010-07-22 17:10:01,365: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/django/core/management/base.py", line 218, in execute [2010-07-22 17:10:01,365: WARNING/MainProcess] output = self.handle(*args, **options) [2010-07-22 17:10:01,365: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/django_celery-2.0.0-py2.6.egg/djcelery/management/commands/celeryd.py", line 22, in handle [2010-07-22 17:10:01,366: WARNING/MainProcess] run_worker(**options) [2010-07-22 17:10:01,366: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/celery-2.0.1-py2.6.egg/celery/bin/celeryd.py", line 385, in run_worker [2010-07-22 17:10:01,366: WARNING/MainProcess] return Worker(**options).run() [2010-07-22 17:10:01,366: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/celery-2.0.1-py2.6.egg/celery/bin/celeryd.py", line 218, in run [2010-07-22 17:10:01,366: WARNING/MainProcess] self.run_worker() [2010-07-22 17:10:01,366: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/celery-2.0.1-py2.6.egg/celery/bin/celeryd.py", line 312, in run_worker [2010-07-22 17:10:01,367: WARNING/MainProcess] worker.start() [2010-07-22 17:10:01,367: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/celery-2.0.1-py2.6.egg/celery/worker/__init__.py", line 206, in start [2010-07-22 17:10:01,367: WARNING/MainProcess] component.start() [2010-07-22 17:10:01,367: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/celery-2.0.1-py2.6.egg/celery/concurrency/processes/__init__.py", line 54, in start [2010-07-22 17:10:01,367: WARNING/MainProcess] maxtasksperchild=self.maxtasksperchild) [2010-07-22 17:10:01,367: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/celery-2.0.1-py2.6.egg/celery/concurrency/processes/pool.py", line 448, in __init__ [2010-07-22 17:10:01,368: WARNING/MainProcess] self._setup_queues() [2010-07-22 17:10:01,368: WARNING/MainProcess] File "/usr/local/lib/python2.6/site-packages/celery-2.0.1-py2.6.egg/celery/concurrency/processes/pool.py", line 564, in _setup_queues [2010-07-22 17:10:01,368: WARNING/MainProcess] self._inqueue = SimpleQueue() [2010-07-22 17:10:01,368: WARNING/MainProcess] File "/usr/local/lib/python2.6/multiprocessing/queues.py", line 315, in __init__ [2010-07-22 17:10:01,368: WARNING/MainProcess] self._rlock = Lock() [2010-07-22 17:10:01,368: WARNING/MainProcess] File "/usr/local/lib/python2.6/multiprocessing/synchronize.py", line 117, in __init__ [2010-07-22 17:10:01,369: WARNING/MainProcess] SemLock.__init__(self, SEMAPHORE, 1, 1) [2010-07-22 17:10:01,369: WARNING/MainProcess] File "/usr/local/lib/python2.6/multiprocessing/synchronize.py", line 49, in __init__ [2010-07-22 17:10:01,369: WARNING/MainProcess] sl = self._semlock = _multiprocessing.SemLock(kind, value, maxvalue) [2010-07-22 17:10:01,369: WARNING/MainProcess] OSError [2010-07-22 17:10:01,369: WARNING/MainProcess] : [2010-07-22 17:10:01,369: WARNING/MainProcess] [Errno 38] Function not implemented Am I just totally screwed and should use a new kernel that has this implemented or is there an easy way to resolve this?

    Read the article

  • ASA 5505 stops local internet when connected to VPN

    - by g18c
    Hi I have a Cisco ASA router running firmware 8.2(5) which hosts an internal LAN on 192.168.30.0/24. I have used the VPN Wizard to setup L2TP access and I can connect in fine from a Windows box and can ping hosts behind the VPN router. However, when connected to the VPN I can no longer ping out to my internet or browse web pages. I would like to be able to access the VPN, and also browse the internet at the same time - I understand this is called split tunneling (have ticked the setting in the wizard but to no effect) and if so how do I do this? Alternatively, if split tunneling is a pain to setup, then making the connected VPN client have internet access from the ASA WAN IP would be OK. Thanks, Chris names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.30.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address 208.74.158.58 255.255.255.252 ! ftp mode passive access-list inside_nat0_outbound extended permit ip any 10.10.10.0 255.255.255.128 access-list inside_nat0_outbound extended permit ip 192.168.30.0 255.255.255.0 192.168.30.192 255.255.255.192 access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.30.0 255.255.255.0 access-list DefaultRAGroup_splitTunnelAcl_1 standard permit 192.168.30.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool LANVPNPOOL 192.168.30.220-192.168.30.249 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 192.168.30.0 255.255.255.0 route outside 0.0.0.0 0.0.0.0 208.74.158.57 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.30.0 255.255.255.0 inside snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 TRANS_ESP_3DES_SHA crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.30.3 vpn-tunnel-protocol l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value DefaultRAGroup_splitTunnelAcl_1 username user password Cj7W5X7wERleAewO8ENYtg== nt-encrypted privilege 0 tunnel-group DefaultRAGroup general-attributes address-pool LANVPNPOOL default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global prompt hostname context : end

    Read the article

  • MySQL InnoDB disappeared, all InnoDB data cant be accessed

    - by dogmatic69
    Mysql (including InnoDB) was working fine, after a restart the other day when mysql starts it says in the logs: 140604 23:36:07 [Note] Plugin 'FEDERATED' is disabled. 140604 23:36:07 [Note] Plugin 'InnoDB' is disabled. In the app it says: SQLSTATE[42000]: Syntax error or access violation: 1286 Unknown storage engine 'InnoDB' Now, according to google this is a very simple fix, just remove the ib_logfile[0|1] files, which I have done and does not do anything. I started by making a full copy of the data dir for testing various 'fixes'. I have also uninstalled mysql and reinstalled it with no change, I just cant get it to run with innodb working anymore :/ # mysql --version mysql Ver 14.14 Distrib 5.5.37, for debian-linux-gnu (x86_64) using readline 6.3 I have also tried the innodb_force_recovery setting, 0 - 6, Any time I run a command on an InnoDB table it says innodb_force_recovery LOGS (from around the time it died) was working here Version: '5.5.37-0ubuntu0.14.04.1' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 140530 1:24:22 [Note] /usr/sbin/mysqld: Normal shutdown 140530 1:24:22 [Note] Event Scheduler: Purging the queue. 0 events 140530 1:24:22 InnoDB: Starting shutdown... 140530 1:24:24 InnoDB: Shutdown completed; log sequence number 3345857316 140530 1:24:24 [Note] /usr/sbin/mysqld: Shutdown complete 140530 22:03:12 [Warning] Using unique option prefix myisam-recover instead of myisam-recover-options is deprecated and will be removed in a future release. Please use the full name instead. 140530 22:03:12 [Note] Plugin 'FEDERATED' is disabled. 140530 22:03:12 InnoDB: The InnoDB memory heap is disabled 140530 22:03:12 InnoDB: Mutexes and rw_locks use GCC atomic builtins 140530 22:03:12 InnoDB: Compressed tables use zlib 1.2.8 140530 22:03:12 InnoDB: Using Linux native AIO 140530 22:03:12 InnoDB: Initializing buffer pool, size = 128.0M 140530 22:03:12 InnoDB: Completed initialization of buffer pool 140530 22:03:12 InnoDB: highest supported file format is Barracuda. 140530 22:03:15 InnoDB: Waiting for the background threads to start 140530 22:03:16 InnoDB: 5.5.37 started; log sequence number 3345857316 140530 22:03:16 [Note] Server hostname (bind-address): '192.168.1.20'; port: 3306 140530 22:03:16 [Note] - '192.168.1.20' resolves to '192.168.1.20'; 140530 22:03:16 [Note] Server socket created on IP: '192.168.1.20'. 140530 22:03:16 [Note] Event Scheduler: Loaded 0 events 140530 22:03:16 [Note] /usr/sbin/mysqld: ready for connections. 140602 0:58:39 [Note] Event Scheduler: Purging the queue. 0 events 140602 0:58:39 InnoDB: Starting shutdown... 140602 0:58:41 InnoDB: Shutdown completed; log sequence number 3345954467 140602 0:58:41 [Note] /usr/sbin/mysqld: Shutdown complete does not work anymore 140602 21:45:19 [Warning] Using unique option prefix myisam-recover instead of myisam-recover-options is deprecated and will be removed in a future release. Please use the full name instead. 140602 21:45:19 [Note] Plugin 'FEDERATED' is disabled. 140602 21:45:19 [Note] Plugin 'InnoDB' is disabled. 140602 21:45:19 [Note] Server hostname (bind-address): '192.168.1.20'; port: 3306 140602 21:45:19 [Note] - '192.168.1.20' resolves to '192.168.1.20'; 140602 21:45:19 [Note] Server socket created on IP: '192.168.1.20'. 140602 21:45:19 [Note] Event Scheduler: Loaded 0 events 140602 21:45:19 [Note] /usr/sbin/mysqld: ready for connections.

    Read the article

  • MySQL crash. Unknown cause. Signal 11

    - by fortmac
    This is a database that I installed ~6 months ago and had been running fine. This is currently running in Ubuntu 12.04. Attempting to connect to MySQL causes this error: ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) Then theres: $ sudo mysqld which returns: 130702 15:38:54 [Note] Plugin 'FEDERATED' is disabled. 130702 15:38:54 InnoDB: The InnoDB memory heap is disabled 130702 15:38:54 InnoDB: Mutexes and rw_locks use GCC atomic builtins 130702 15:38:54 InnoDB: Compressed tables use zlib 1.2.3.4 130702 15:38:54 InnoDB: Initializing buffer pool, size = 128.0M 130702 15:38:54 InnoDB: Completed initialization of buffer pool 130702 15:38:54 InnoDB: highest supported file format is Barracuda. InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 130702 15:38:54 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 130702 15:38:55 InnoDB: Waiting for the background threads to start 130702 15:38:56 InnoDB: 1.1.8 started; log sequence number 5201901917 130702 15:38:56 [Note] Server hostname (bind-address): '127.0.0.1'; port: 3306 130702 15:38:56 [Note] - '127.0.0.1' resolves to '127.0.0.1'; 130702 15:38:56 [Note] Server socket created on IP: '127.0.0.1'. 130702 15:38:56 [Note] Event Scheduler: Loaded 0 events 130702 15:38:56 [Note] mysqld: ready for connections. Version: '5.5.28-0ubuntu0.12.04.3' socket: '/var/run/mysqld/mysqld.sock' port: 3306 (Ubuntu) 19:39:02 UTC - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=16777216 read_buffer_size=131072 max_used_connections=1 max_threads=151 thread_count=1 connection_count=1 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 346681 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. Thread pointer: 0x7f9509e51530 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 7f94f1d3de60 thread_stack 0x30000 mysqld(my_print_stacktrace+0x29)[0x7f95083427b9] mysqld(handle_fatal_signal+0x483)[0x7f9508209b43] /lib/x86_64-linux-gnu/libpthread.so.0(+0xfcb0)[0x7f9506f5bcb0] mysqld(+0x320e1c)[0x7f9508113e1c] mysqld(_ZN4JOIN15alloc_func_listEv+0x9c)[0x7f950812391c] mysqld(_ZN4JOIN7prepareEPPP4ItemP10TABLE_LISTjS1_jP8st_orderS7_S1_S7_P13st_select_lexP18st_select_lex_unit+0x918)[0x7f9508124658] mysqld(_Z12mysql_selectP3THDPPP4ItemP10TABLE_LISTjR4ListIS1_ES2_jP8st_orderSB_S2_SB_yP13select_resultP18st_select_lex_unitP13st_select_lex+0x130)[0x7f950812d060] mysqld(_Z13handle_selectP3THDP3LEXP13select_resultm+0x17c)[0x7f9508132fbc] mysqld(+0x2f6714)[0x7f95080e9714] mysqld(_Z21mysql_execute_commandP3THD+0x16d8)[0x7f95080f1178] mysqld(_Z11mysql_parseP3THDPcjP12Parser_state+0x10f)[0x7f95080f5e0f] mysqld(_Z16dispatch_command19enum_server_commandP3THDPcj+0x1380)[0x7f95080f7260] mysqld(_Z24do_handle_one_connectionP3THD+0x1bd)[0x7f950819b80d] mysqld(handle_one_connection+0x50)[0x7f950819b870] /lib/x86_64-linux-gnu/libpthread.so.0(+0x7e9a)[0x7f9506f53e9a] /lib/x86_64-linux-gnu/libc.so.6(clone+0x6d)[0x7f9506684cbd] Trying to get some variables. Some pointers may be invalid and cause the dump to abort. Query (7f94e0004b80): is an invalid pointer Connection ID (thread ID): 1 Status: NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. I'm at a loss. What other reports would be useful in diagnosing this? /var/log/mysql.err & /var/log/mysql.log are empty.

    Read the article

  • How to test a C++ library usability in configure.in?

    - by jbatista
    Hi, I'm working on a C++ project and I'm looking for a way to test the existence and usability of IBM Informix's library with the Autotools - namely, editing a configure.in. I don't have experience with Autotools, so basically I'm picking up from the project's configure.in et al. scripts and copying&changing where I feel needs to be changed. IOW, I've been adapting from the existing text in configure.in. So far I've been using successfully the AC_ CHECK_ LIB in configure.in to test whether a certain library both exists and is usable. But this only seems to work with libraries with functions, not e.g. classes. Namely, this fails when testing Informix's libifc++.so: AC_CHECK_LIB(ifc++, ITString, INFORMIX_LIB="-L$INFORMIX_LIB_LOCATION/c++ -lifc++ -L$INFORMIX_LIB_LOCATION -L$INFORMIX_LIB_LOCATION/dmi -L$INFORMIX_LIB_LOCATION/esql -lifdmi -lifsql -lifasf -lifgen -lifos -lifgls -lifglx $INFORMIX_LIB_LOCATION/esql/checkapi.o -lm -ldl -lcrypt -lnsl", echo "* WARNING: libifc++.so not found!" INFORMIX_INC="" INFORMIX_LIB="" ) I've also tried using other combinations, like ITString::ITString, etc. I haven't found a "pure" function in Informix's API (i.e., one that isn't contexted in a C++ class). So I'm hoping that either there's a way to use AC_CHECK_LIB in this context, or there's another autoconf/configure.in "command" for this specific use. Thanks in advance for your feedback.

    Read the article

  • Parallelism in .NET – Part 15, Making Tasks Run: The TaskScheduler

    - by Reed
    In my introduction to the Task class, I specifically made mention that the Task class does not directly provide it’s own execution.  In addition, I made a strong point that the Task class itself is not directly related to threads or multithreading.  Rather, the Task class is used to implement our decomposition of tasks.  Once we’ve implemented our tasks, we need to execute them.  In the Task Parallel Library, the execution of Tasks is handled via an instance of the TaskScheduler class. The TaskScheduler class is an abstract class which provides a single function: it schedules the tasks and executes them within an appropriate context.  This class is the class which actually runs individual Task instances.  The .NET Framework provides two (internal) implementations of the TaskScheduler class. Since a Task, based on our decomposition, should be a self-contained piece of code, parallel execution makes sense when executing tasks.  The default implementation of the TaskScheduler class, and the one most often used, is based on the ThreadPool.  This can be retrieved via the TaskScheduler.Default property, and is, by default, what is used when we just start a Task instance with Task.Start(). Normally, when a Task is started by the default TaskScheduler, the task will be treated as a single work item, and run on a ThreadPool thread.  This pools tasks, and provides Task instances all of the advantages of the ThreadPool, including thread pooling for reduced resource usage, and an upper cap on the number of work items.  In addition, .NET 4 brings us a much improved thread pool, providing work stealing and reduced locking within the thread pool queues.  By using the default TaskScheduler, our Tasks are run asynchronously on the ThreadPool. There is one notable exception to my above statements when using the default TaskScheduler.  If a Task is created with the TaskCreationOptions set to TaskCreationOptions.LongRunning, the default TaskScheduler will generate a new thread for that Task, at least in the current implementation.  This is useful for Tasks which will persist for most of the lifetime of your application, since it prevents your Task from starving the ThreadPool of one of it’s work threads. The Task Parallel Library provides one other implementation of the TaskScheduler class.  In addition to providing a way to schedule tasks on the ThreadPool, the framework allows you to create a TaskScheduler which works within a specified SynchronizationContext.  This scheduler can be retrieved within a thread that provides a valid SynchronizationContext by calling the TaskScheduler.FromCurrentSynchronizationContext() method. This implementation of TaskScheduler is intended for use with user interface development.  Windows Forms and Windows Presentation Foundation both require any access to user interface controls to occur on the same thread that created the control.  For example, if you want to set the text within a Windows Forms TextBox, and you’re working on a background thread, that UI call must be marshaled back onto the UI thread.  The most common way this is handled depends on the framework being used.  In Windows Forms, Control.Invoke or Control.BeginInvoke is most often used.  In WPF, the equivelent calls are Dispatcher.Invoke or Dispatcher.BeginInvoke. As an example, say we’re working on a background thread, and we want to update a TextBlock in our user interface with a status label.  The code would typically look something like: // Within background thread work... string status = GetUpdatedStatus(); Dispatcher.BeginInvoke(DispatcherPriority.Normal, new Action( () => { statusLabel.Text = status; })); // Continue on in background method .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This works fine, but forces your method to take a dependency on WPF or Windows Forms.  There is an alternative option, however.  Both Windows Forms and WPF, when initialized, setup a SynchronizationContext in their thread, which is available on the UI thread via the SynchronizationContext.Current property.  This context is used by classes such as BackgroundWorker to marshal calls back onto the UI thread in a framework-agnostic manner. The Task Parallel Library provides the same functionality via the TaskScheduler.FromCurrentSynchronizationContext() method.  When setting up our Tasks, as long as we’re working on the UI thread, we can construct a TaskScheduler via: TaskScheduler uiScheduler = TaskScheduler.FromCurrentSynchronizationContext(); We then can use this scheduler on any thread to marshal data back onto the UI thread.  For example, our code above can then be rewritten as: string status = GetUpdatedStatus(); (new Task(() => { statusLabel.Text = status; })) .Start(uiScheduler); // Continue on in background method This is nice since it allows us to write code that isn’t tied to Windows Forms or WPF, but is still fully functional with those technologies.  I’ll discuss even more uses for the SynchronizationContext based TaskScheduler when I demonstrate task continuations, but even without continuations, this is a very useful construct. In addition to the two implementations provided by the Task Parallel Library, it is possible to implement your own TaskScheduler.  The ParallelExtensionsExtras project within the Samples for Parallel Programming provides nine sample TaskScheduler implementations.  These include schedulers which restrict the maximum number of concurrent tasks, run tasks on a single threaded apartment thread, use a new thread per task, and more.

    Read the article

  • Installing a DHCP Service On Win2k8 ( Windows Server 2008 )

    - by Akshay Deep Lamba
    Introduction Dynamic Host Configuration Protocol (DHCP) is a core infrastructure service on any network that provides IP addressing and DNS server information to PC clients and any other device. DHCP is used so that you do not have to statically assign IP addresses to every device on your network and manage the issues that static IP addressing can create. More and more, DHCP is being expanded to fit into new network services like the Windows Health Service and Network Access Protection (NAP). However, before you can use it for more advanced services, you need to first install it and configure the basics. Let’s learn how to do that. Installing Windows Server 2008 DHCP Server Installing Windows Server 2008 DCHP Server is easy. DHCP Server is now a “role” of Windows Server 2008 – not a windows component as it was in the past. To do this, you will need a Windows Server 2008 system already installed and configured with a static IP address. You will need to know your network’s IP address range, the range of IP addresses you will want to hand out to your PC clients, your DNS server IP addresses, and your default gateway. Additionally, you will want to have a plan for all subnets involved, what scopes you will want to define, and what exclusions you will want to create. To start the DHCP installation process, you can click Add Roles from the Initial Configuration Tasks window or from Server Manager à Roles à Add Roles. Figure 1: Adding a new Role in Windows Server 2008 When the Add Roles Wizard comes up, you can click Next on that screen. Next, select that you want to add the DHCP Server Role, and click Next. Figure 2: Selecting the DHCP Server Role If you do not have a static IP address assigned on your server, you will get a warning that you should not install DHCP with a dynamic IP address. At this point, you will begin being prompted for IP network information, scope information, and DNS information. If you only want to install DHCP server with no configured scopes or settings, you can just click Next through these questions and proceed with the installation. On the other hand, you can optionally configure your DHCP Server during this part of the installation. In my case, I chose to take this opportunity to configure some basic IP settings and configure my first DHCP Scope. I was shown my network connection binding and asked to verify it, like this: Figure 3: Network connection binding What the wizard is asking is, “what interface do you want to provide DHCP services on?” I took the default and clicked Next. Next, I entered my Parent Domain, Primary DNS Server, and Alternate DNS Server (as you see below) and clicked Next. Figure 4: Entering domain and DNS information I opted NOT to use WINS on my network and I clicked Next. Then, I was promoted to configure a DHCP scope for the new DHCP Server. I have opted to configure an IP address range of 192.168.1.50-100 to cover the 25+ PC Clients on my local network. To do this, I clicked Add to add a new scope. As you see below, I named the Scope WBC-Local, configured the starting and ending IP addresses of 192.168.1.50-192.168.1.100, subnet mask of 255.255.255.0, default gateway of 192.168.1.1, type of subnet (wired), and activated the scope. Figure 5: Adding a new DHCP Scope Back in the Add Scope screen, I clicked Next to add the new scope (once the DHCP Server is installed). I chose to Disable DHCPv6 stateless mode for this server and clicked Next. Then, I confirmed my DHCP Installation Selections (on the screen below) and clicked Install. Figure 6: Confirm Installation Selections After only a few seconds, the DHCP Server was installed and I saw the window, below: Figure 7: Windows Server 2008 DHCP Server Installation succeeded I clicked Close to close the installer window, then moved on to how to manage my new DHCP Server. How to Manage your new Windows Server 2008 DHCP Server Like the installation, managing Windows Server 2008 DHCP Server is also easy. Back in my Windows Server 2008 Server Manager, under Roles, I clicked on the new DHCP Server entry. Figure 8: DHCP Server management in Server Manager While I cannot manage the DHCP Server scopes and clients from here, what I can do is to manage what events, services, and resources are related to the DHCP Server installation. Thus, this is a good place to go to check the status of the DHCP Server and what events have happened around it. However, to really configure the DHCP Server and see what clients have obtained IP addresses, I need to go to the DHCP Server MMC. To do this, I went to Start à Administrative Tools à DHCP Server, like this: Figure 9: Starting the DHCP Server MMC When expanded out, the MMC offers a lot of features. Here is what it looks like: Figure 10: The Windows Server 2008 DHCP Server MMC The DHCP Server MMC offers IPv4 & IPv6 DHCP Server info including all scopes, pools, leases, reservations, scope options, and server options. If I go into the address pool and the scope options, I can see that the configuration we made when we installed the DHCP Server did, indeed, work. The scope IP address range is there, and so are the DNS Server & default gateway. Figure 11: DHCP Server Address Pool Figure 12: DHCP Server Scope Options So how do we know that this really works if we do not test it? The answer is that we do not. Now, let’s test to make sure it works. How do we test our Windows Server 2008 DHCP Server? To test this, I have a Windows Vista PC Client on the same network segment as the Windows Server 2008 DHCP server. To be safe, I have no other devices on this network segment. I did an IPCONFIG /RELEASE then an IPCONFIG /RENEW and verified that I received an IP address from the new DHCP server, as you can see below: Figure 13: Vista client received IP address from new DHCP Server Also, I went to my Windows 2008 Server and verified that the new Vista client was listed as a client on the DHCP server. This did indeed check out, as you can see below: Figure 14: Win 2008 DHCP Server has the Vista client listed under Address Leases With that, I knew that I had a working configuration and we are done!

    Read the article

  • Integration Patterns with Azure Service Bus Relay, Part 1: Exposing the on-premise service

    - by Elton Stoneman
    We're in the process of delivering an enabling project to expose on-premise WCF services securely to Internet consumers. The Azure Service Bus Relay is doing the clever stuff, we register our on-premise service with Azure, consumers call into our .servicebus.windows.net namespace, and their requests are relayed and serviced on-premise. In theory it's all wonderfully simple; by using the relay we get lots of protocol options, free HTTPS and load balancing, and by integrating to ACS we get plenty of security options. Part of our delivery is a suite of sample consumers for the service - .NET, jQuery, PHP - and this set of posts will cover setting up the service and the consumers. Part 1: Exposing the on-premise service In theory, this is ultra-straightforward. In practice, and on a dev laptop it is - but in a corporate network with firewalls and proxies, it isn't, so we'll walkthrough some of the pitfalls. Note that I'm using the "old" Azure portal which will soon be out of date, but the new shiny portal should have the same steps available and be easier to use. We start with a simple WCF service which takes a string as input, reverses the string and returns it. The Part 1 version of the code is on GitHub here: on GitHub here: IPASBR Part 1. Configuring Azure Service Bus Start by logging into the Azure portal and registering a Service Bus namespace which will be our endpoint in the cloud. Give it a globally unique name, set it up somewhere near you (if you’re in Europe, remember Europe (North) is Ireland, and Europe (West) is the Netherlands), and  enable ACS integration by ticking "Access Control" as a service: Authenticating and authorizing to ACS When we try to register our on-premise service as a listener for the Service Bus endpoint, we need to supply credentials, which means only trusted service providers can act as listeners. We can use the default "owner" credentials, but that has admin permissions so a dedicated service account is better (Neil Mackenzie has a good post On Not Using owner with the Azure AppFabric Service Bus with lots of permission details). Click on "Access Control Service" for the namespace, navigate to Service Identities and add a new one. Give the new account a sensible name and description: Let ACS generate a symmetric key for you (this will be the shared secret we use in the on-premise service to authenticate as a listener), but be sure to set the expiration date to something usable. The portal defaults to expiring new identities after 1 year - but when your year is up *your identity will expire without warning* and everything will stop working. In production, you'll need governance to manage identity expiration and a process to make sure you renew identities and roll new keys regularly. The new service identity needs to be authorized to listen on the service bus endpoint. This is done through claim mapping in ACS - we'll set up a rule that says if the nameidentifier in the input claims has the value serviceProvider, in the output we'll have an action claim with the value Listen. In the ACS portal you'll see that there is already a Relying Party Application set up for ServiceBus, which has a Default rule group. Edit the rule group and click Add to add this new rule: The values to use are: Issuer: Access Control Service Input claim type: http://schemas.xmlsoap.org/ws/2005/05/identity/claims/nameidentifier Input claim value: serviceProvider Output claim type: net.windows.servicebus.action Output claim value: Listen When your service namespace and identity are set up, open the Part 1 solution and put your own namespace, service identity name and secret key into the file AzureConnectionDetails.xml in Solution Items, e.g: <azure namespace="sixeyed-ipasbr">    <!-- ACS credentials for the listening service (Part1):-->   <service identityName="serviceProvider"            symmetricKey="nuR2tHhlrTCqf4YwjT2RA2BZ/+xa23euaRJNLh1a/V4="/>  </azure> Build the solution, and the T4 template will generate the Web.config for the service project with your Azure details in the transportClientEndpointBehavior:           <behavior name="SharedSecret">             <transportClientEndpointBehavior credentialType="SharedSecret">               <clientCredentials>                 <sharedSecret issuerName="serviceProvider"                               issuerSecret="nuR2tHhlrTCqf4YwjT2RA2BZ/+xa23euaRJNLh1a/V4="/>               </clientCredentials>             </transportClientEndpointBehavior>           </behavior> , and your service namespace in the Azure endpoint:         <!-- Azure Service Bus endpoints -->          <endpoint address="sb://sixeyed-ipasbr.servicebus.windows.net/net"                   binding="netTcpRelayBinding"                   contract="Sixeyed.Ipasbr.Services.IFormatService"                   behaviorConfiguration="SharedSecret">         </endpoint> The sample project is hosted in IIS, but it won't register with Azure until the service is activated. Typically you'd install AppFabric 1.1 for Widnows Server and set the service to auto-start in IIS, but for dev just navigate to the local REST URL, which will activate the service and register it with Azure. Testing the service locally As well as an Azure endpoint, the service has a WebHttpBinding for local REST access:         <!-- local REST endpoint for internal use -->         <endpoint address="rest"                   binding="webHttpBinding"                   behaviorConfiguration="RESTBehavior"                   contract="Sixeyed.Ipasbr.Services.IFormatService" /> Build the service, then navigate to: http://localhost/Sixeyed.Ipasbr.Services/FormatService.svc/rest/reverse?string=abc123 - and you should see the reversed string response: If your network allows it, you'll get the expected response as before, but in the background your service will also be listening in the cloud. Good stuff! Who needs network security? Onto the next post for consuming the service with the netTcpRelayBinding.  Setting up network access to Azure But, if you get an error, it's because your network is secured and it's doing something to stop the relay working. The Service Bus relay bindings try to use direct TCP connections to Azure, so if ports 9350-9354 are available *outbound*, then the relay will run through them. If not, the binding steps down to standard HTTP, and issues a CONNECT across port 443 or 80 to set up a tunnel for the relay. If your network security guys are doing their job, the first option will be blocked by the firewall, and the second option will be blocked by the proxy, so you'll get this error: System.ServiceModel.CommunicationException: Unable to reach sixeyed-ipasbr.servicebus.windows.net via TCP (9351, 9352) or HTTP (80, 443) - and that will probably be the start of lots of discussions. Network guys don't really like giving servers special permissions for the web proxy, and they really don't like opening ports, so they'll need to be convinced about this. The resolution in our case was to put up a dedicated box in a DMZ, tinker with the firewall and the proxy until we got a relay connection working, then run some traffic which the the network guys monitored to do a security assessment afterwards. Along the way we hit a few more issues, diagnosed mainly with Fiddler and Wireshark: System.Net.ProtocolViolationException: Chunked encoding upload is not supported on the HTTP/1.0 protocol - this means the TCP ports are not available, so Azure tries to relay messaging traffic across HTTP. The service can access the endpoint, but the proxy is downgrading traffic to HTTP 1.0, which does not support tunneling, so Azure can’t make its connection. We were using the Squid proxy, version 2.6. The Squid project is incrementally adding HTTP 1.1 support, but there's no definitive list of what's supported in what version (here are some hints). System.ServiceModel.Security.SecurityNegotiationException: The X.509 certificate CN=servicebus.windows.net chain building failed. The certificate that was used has a trust chain that cannot be verified. Replace the certificate or change the certificateValidationMode. The evocation function was unable to check revocation because the revocation server was offline. - by this point we'd given up on the HTTP proxy and opened the TCP ports. We got this error when the relay binding does it's authentication hop to ACS. The messaging traffic is TCP, but the control traffic still goes over HTTP, and as part of the ACS authentication the process checks with a revocation server to see if Microsoft’s ACS cert is still valid, so the proxy still needs some clearance. The service account (the IIS app pool identity) needs access to: www.public-trust.com mscrl.microsoft.com We still got this error periodically with different accounts running the app pool. We fixed that by ensuring the machine-wide proxy settings are set up, so every account uses the correct proxy: netsh winhttp set proxy proxy-server="http://proxy.x.y.z" - and you might need to run this to clear out your credential cache: certutil -urlcache * delete If your network guys end up grudgingly opening ports, they can restrict connections to the IP address range for your chosen Azure datacentre, which might make them happier - see Windows Azure Datacenter IP Ranges. After all that you've hopefully got an on-premise service listening in the cloud, which you can consume from pretty much any technology.

    Read the article

  • Clonezilla restore from Samba - no 'restoredisk' option

    - by MT_Head
    I used a CloneZilla LiveCD to back up a couple of Windows machines to a Samba share. Now I'm trying to restore those images, and CloneZilla won't even give me the 'restoredisk' or 'restorepart' options on the menu. I'm guessing that this is because CZ isn't recognizing a valid image... but why? Here's a listing of the folder on the Samba share: -rwxrwxrwx 1 marc users 319 May 31 03:45 blkdev.list -rwxrwxrwx 1 marc users 5307 May 31 04:41 clonezilla-img -rwxrwxrwx 1 marc users 4 May 31 04:31 disk -rwxrwxrwx 1 marc users 16091 May 31 04:31 Info-dmi.txt -rwxrwxrwx 1 marc users 11029 May 31 04:31 Info-lshw.txt -rwxrwxrwx 1 marc users 1502 May 31 04:31 Info-lspci.txt -rwxrwxrwx 1 marc users 170 May 31 04:31 Info-packages.txt -rwxrwxrwx 1 marc users 80 May 31 04:41 Info-saved-by-cmd.txt -rwxrwxrwx 1 marc users 10 May 31 04:31 parts -rwxrwxrwx 1 marc users 2097152000 May 31 04:06 sda1.ntfs-ptcl-img.gz.aa -rwxrwxrwx 1 marc users 247361656 May 31 04:08 sda1.ntfs-ptcl-img.gz.ab -rwxrwxrwx 1 marc users 823182034 May 31 04:31 sda2.ntfs-ptcl-img.gz.aa -rwxrwxrwx 1 marc users 36 May 31 03:45 sda-chs.sf -rwxrwxrwx 1 marc users 31744 May 31 03:45 sda-hidden-data-after-mbr -rwxrwxrwx 1 marc users 512 May 31 03:45 sda-mbr -rwxrwxrwx 1 marc users 315 May 31 03:45 sda-pt.parted -rwxrwxrwx 1 marc users 285 May 31 03:45 sda-pt.parted.compact -rwxrwxrwx 1 marc users 259 May 31 03:45 sda-pt.sf (I've been experimenting with various permissions trying to get this to work; that's why they're currently all "rwxrwxrwx"...) I've got my CZ LiveCD stuck in a (different) machine with a 160GB SATA disk that I'm fine with overwriting; although CZ doesn't show a directory listing, it does show that the correct folder is mounted as /home/partimag. But a moment later, after selecting either Beginner or Expert, I'm only presented with the "savedisk", "saveparts", and "exit" options. What am I doing wrong? I am confident that the initial backup was successful; I can post the log if desired, or any other information that might be germane. Edit: I've copied the contents of the folder onto a 16GB USB stick and set THAT as /home/partimag. Still nothing. What the hell is CZ looking for?

    Read the article

  • OpenVPN - Windows 8 to Windows 2008 Server, not connecting

    - by niico
    I have followed this tutorial about setting up an OpenVPN Server on Windows Server - and a client on Windows (in this case Windows 8). The server appears to be running fine - but it is not connecting with this error: Mon Jul 22 19:09:04 2013 Warning: cannot open --log file: C:\Program Files\OpenVPN\log\my-laptop.log: Access is denied. (errno=5) Mon Jul 22 19:09:04 2013 OpenVPN 2.3.2 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [PKCS11] [eurephia] [IPv6] built on Jun 3 2013 Mon Jul 22 19:09:04 2013 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:25340 Mon Jul 22 19:09:04 2013 Need hold release from management interface, waiting... Mon Jul 22 19:09:05 2013 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:25340 Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'state on' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'log all on' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'hold off' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'hold release' Mon Jul 22 19:09:05 2013 Socket Buffers: R=[65536->65536] S=[65536->65536] Mon Jul 22 19:09:05 2013 UDPv4 link local: [undef] Mon Jul 22 19:09:05 2013 UDPv4 link remote: [AF_INET]66.666.66.666:9999 Mon Jul 22 19:09:05 2013 MANAGEMENT: >STATE:1374494945,WAIT,,, Mon Jul 22 19:10:05 2013 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) Mon Jul 22 19:10:05 2013 TLS Error: TLS handshake failed Mon Jul 22 19:10:05 2013 SIGUSR1[soft,tls-error] received, process restarting Mon Jul 22 19:10:05 2013 MANAGEMENT: >STATE:1374495005,RECONNECTING,tls-error,, Mon Jul 22 19:10:05 2013 Restart pause, 2 second(s) Note I have changed the IP and port no (it uses a non-standard port for security reasons). That port is open on the hardware firewall. The server logs are showing a connection attempt from my client: TLS: Initial packet from [AF_INET]118.68.xx.xx:65011, sid=081af4ed xxxxxxxx Mon Jul 22 14:19:15 2013 118.68.xx.xx:65011 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) How can I problem solve this & find the problem? Thx Update - Client config file: ############################################## # Sample client-side OpenVPN 2.0 config file # # for connecting to multi-client server. # # # # This configuration can be used by multiple # # clients, however each client should have # # its own cert and key files. # # # # On Windows, you might want to rename this # # file so it has a .ovpn extension # ############################################## # Specify that we are a client and that we # will be pulling certain config file directives # from the server. client # Use the same setting as you are using on # the server. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel # if you have more than one. On XP SP2, # you may need to disable the firewall # for the TAP adapter. ;dev-node MyTap # Are we connecting to a TCP or # UDP server? Use the same setting as # on the server. ;proto tcp proto udp # The hostname/IP and port of the server. # You can have multiple remote entries # to load balance between the servers. remote 00.00.00.00 1194 ;remote 00.00.00.00 9999 ;remote my-server-2 1194 # Choose a random host from the remote # list for load-balancing. Otherwise # try hosts in the order specified. ;remote-random # Keep trying indefinitely to resolve the # host name of the OpenVPN server. Very useful # on machines which are not permanently connected # to the internet such as laptops. resolv-retry infinite # Most clients don't need to bind to # a specific local port number. nobind # Downgrade privileges after initialization (non-Windows only) ;user nobody ;group nobody # Try to preserve some state across restarts. persist-key persist-tun # If you are connecting through an # HTTP proxy to reach the actual OpenVPN # server, put the proxy server/IP and # port number here. See the man page # if your proxy server requires # authentication. ;http-proxy-retry # retry on connection failures ;http-proxy [proxy server] [proxy port #] # Wireless networks often produce a lot # of duplicate packets. Set this flag # to silence duplicate packet warnings. ;mute-replay-warnings # SSL/TLS parms. # See the server config file for more # description. It's best to use # a separate .crt/.key file pair # for each client. A single ca # file can be used for all clients. ca "C:\\Program Files\\OpenVPN\\config\\ca.crt" cert "C:\\Program Files\\OpenVPN\\config\\my-laptop.crt" key "C:\\Program Files\\OpenVPN\\config\\my-laptop.key" # Verify server certificate by checking # that the certicate has the nsCertType # field set to "server". This is an # important precaution to protect against # a potential attack discussed here: # http://openvpn.net/howto.html#mitm # # To use this feature, you will need to generate # your server certificates with the nsCertType # field set to "server". The build-key-server # script in the easy-rsa folder will do this. ns-cert-type server # If a tls-auth key is used on the server # then every client must also have the key. ;tls-auth ta.key 1 # Select a cryptographic cipher. # If the cipher option is used on the server # then you must also specify it here. ;cipher x # Enable compression on the VPN link. # Don't enable this unless it is also # enabled in the server config file. comp-lzo # Set log file verbosity. verb 3 # Silence repeating messages ;mute 20 Server config file: ################################################# # Sample OpenVPN 2.0 config file for # # multi-client server. # # # # This file is for the server side # # of a many-clients <-> one-server # # OpenVPN configuration. # # # # OpenVPN also supports # # single-machine <-> single-machine # # configurations (See the Examples page # # on the web site for more info). # # # # This config should work on Windows # # or Linux/BSD systems. Remember on # # Windows to quote pathnames and use # # double backslashes, e.g.: # # "C:\\Program Files\\OpenVPN\\config\\foo.key" # # # # Comments are preceded with '#' or ';' # ################################################# # Which local IP address should OpenVPN # listen on? (optional) ;local 00.00.00.00 # Which TCP/UDP port should OpenVPN listen on? # If you want to run multiple OpenVPN instances # on the same machine, use a different port # number for each one. You will need to # open up this port on your firewall. std 1194 port 1194 # TCP or UDP server? ;proto tcp proto udp # "dev tun" will create a routed IP tunnel, # "dev tap" will create an ethernet tunnel. # Use "dev tap0" if you are ethernet bridging # and have precreated a tap0 virtual interface # and bridged it with your ethernet interface. # If you want to control access policies # over the VPN, you must create firewall # rules for the the TUN/TAP interface. # On non-Windows systems, you can give # an explicit unit number, such as tun0. # On Windows, use "dev-node" for this. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel if you # have more than one. On XP SP2 or higher, # you may need to selectively disable the # Windows firewall for the TAP adapter. # Non-Windows systems usually don't need this. ;dev-node MyTap # SSL/TLS root certificate (ca), certificate # (cert), and private key (key). Each client # and the server must have their own cert and # key file. The server and all clients will # use the same ca file. # # See the "easy-rsa" directory for a series # of scripts for generating RSA certificates # and private keys. Remember to use # a unique Common Name for the server # and each of the client certificates. # # Any X509 key management system can be used. # OpenVPN can also use a PKCS #12 formatted key file # (see "pkcs12" directive in man page). ca "C:\\Program Files\\OpenVPN\\config\\ca.crt" cert "C:\\Program Files\\OpenVPN\\config\\server.crt" key "C:\\Program Files\\OpenVPN\\config\\server.key" # Diffie hellman parameters. # Generate your own with: # openssl dhparam -out dh1024.pem 1024 # Substitute 2048 for 1024 if you are using # 2048 bit keys. dh "C:\\Program Files\\OpenVPN\\config\\dh2048.pem" # Configure server mode and supply a VPN subnet # for OpenVPN to draw client addresses from. # The server will take 10.8.0.1 for itself, # the rest will be made available to clients. # Each client will be able to reach the server # on 10.8.0.1. Comment this line out if you are # ethernet bridging. See the man page for more info. server 10.8.0.0 255.255.255.0 # Maintain a record of client <-> virtual IP address # associations in this file. If OpenVPN goes down or # is restarted, reconnecting clients can be assigned # the same virtual IP address from the pool that was # previously assigned. ifconfig-pool-persist ipp.txt # Configure server mode for ethernet bridging. # You must first use your OS's bridging capability # to bridge the TAP interface with the ethernet # NIC interface. Then you must manually set the # IP/netmask on the bridge interface, here we # assume 10.8.0.4/255.255.255.0. Finally we # must set aside an IP range in this subnet # (start=10.8.0.50 end=10.8.0.100) to allocate # to connecting clients. Leave this line commented # out unless you are ethernet bridging. ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 # Configure server mode for ethernet bridging # using a DHCP-proxy, where clients talk # to the OpenVPN server-side DHCP server # to receive their IP address allocation # and DNS server addresses. You must first use # your OS's bridging capability to bridge the TAP # interface with the ethernet NIC interface. # Note: this mode only works on clients (such as # Windows), where the client-side TAP adapter is # bound to a DHCP client. ;server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. ;push "route 192.168.10.0 255.255.255.0" ;push "route 192.168.20.0 255.255.255.0" # To assign specific IP addresses to specific # clients or if a connecting client has a private # subnet behind it that should also have VPN access, # use the subdirectory "ccd" for client-specific # configuration files (see man page for more info). # EXAMPLE: Suppose the client # having the certificate common name "Thelonious" # also has a small subnet behind his connecting # machine, such as 192.168.40.128/255.255.255.248. # First, uncomment out these lines: ;client-config-dir ccd ;route 192.168.40.128 255.255.255.248 # Then create a file ccd/Thelonious with this line: # iroute 192.168.40.128 255.255.255.248 # This will allow Thelonious' private subnet to # access the VPN. This example will only work # if you are routing, not bridging, i.e. you are # using "dev tun" and "server" directives. # EXAMPLE: Suppose you want to give # Thelonious a fixed VPN IP address of 10.9.0.1. # First uncomment out these lines: ;client-config-dir ccd ;route 10.9.0.0 255.255.255.252 # Then add this line to ccd/Thelonious: # ifconfig-push 10.9.0.1 10.9.0.2 # Suppose that you want to enable different # firewall access policies for different groups # of clients. There are two methods: # (1) Run multiple OpenVPN daemons, one for each # group, and firewall the TUN/TAP interface # for each group/daemon appropriately. # (2) (Advanced) Create a script to dynamically # modify the firewall in response to access # from different clients. See man # page for more info on learn-address script. ;learn-address ./script # If enabled, this directive will configure # all clients to redirect their default # network gateway through the VPN, causing # all IP traffic such as web browsing and # and DNS lookups to go through the VPN # (The OpenVPN server machine may need to NAT # or bridge the TUN/TAP interface to the internet # in order for this to work properly). ;push "redirect-gateway def1 bypass-dhcp" # Certain Windows-specific network settings # can be pushed to clients, such as DNS # or WINS server addresses. CAVEAT: # http://openvpn.net/faq.html#dhcpcaveats # The addresses below refer to the public # DNS servers provided by opendns.com. ;push "dhcp-option DNS 208.67.222.222" ;push "dhcp-option DNS 208.67.220.220" # Uncomment this directive to allow differenta # clients to be able to "see" each other. # By default, clients will only see the server. # To force clients to only see the server, you # will also need to appropriately firewall the # server's TUN/TAP interface. ;client-to-client # Uncomment this directive if multiple clients # might connect with the same certificate/key # files or common names. This is recommended # only for testing purposes. For production use, # each client should have its own certificate/key # pair. # # IF YOU HAVE NOT GENERATED INDIVIDUAL # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, # EACH HAVING ITS OWN UNIQUE "COMMON NAME", # UNCOMMENT THIS LINE OUT. ;duplicate-cn # The keepalive directive causes ping-like # messages to be sent back and forth over # the link so that each side knows when # the other side has gone down. # Ping every 10 seconds, assume that remote # peer is down if no ping received during # a 120 second time period. keepalive 10 120 # For extra security beyond that provided # by SSL/TLS, create an "HMAC firewall" # to help block DoS attacks and UDP port flooding. # # Generate with: # openvpn --genkey --secret ta.key # # The server and each client must have # a copy of this key. # The second parameter should be '0' # on the server and '1' on the clients. ;tls-auth ta.key 0 # This file is secret # Select a cryptographic cipher. # This config item must be copied to # the client config file as well. ;cipher BF-CBC # Blowfish (default) ;cipher AES-128-CBC # AES ;cipher DES-EDE3-CBC # Triple-DES # Enable compression on the VPN link. # If you enable it here, you must also # enable it in the client config file. comp-lzo # The maximum number of concurrently connected # clients we want to allow. ;max-clients 100 # It's a good idea to reduce the OpenVPN # daemon's privileges after initialization. # # You can uncomment this out on # non-Windows systems. ;user nobody ;group nobody # The persist options will try to avoid # accessing certain resources on restart # that may no longer be accessible because # of the privilege downgrade. persist-key persist-tun # Output a short status file showing # current connections, truncated # and rewritten every minute. status openvpn-status.log # By default, log messages will go to the syslog (or # on Windows, if running as a service, they will go to # the "\Program Files\OpenVPN\log" directory). # Use log or log-append to override this default. # "log" will truncate the log file on OpenVPN startup, # while "log-append" will append to it. Use one # or the other (but not both). ;log openvpn.log ;log-append openvpn.log # Set the appropriate level of log # file verbosity. # # 0 is silent, except for fatal errors # 4 is reasonable for general usage # 5 and 6 can help to debug connection problems # 9 is extremely verbose verb 3 # Silence repeating messages. At most 20 # sequential messages of the same message # category will be output to the log. ;mute 20 I have changed IP's for security

    Read the article

  • lshw tells me my processor is a 64 bits but my motherboard has a 32 bits width

    - by bpetit
    Recently I noticed lshw tells me a strange thing. Here is the first part of my lshw output: bpetit-1025c description: Notebook product: 1025C (1025C) vendor: ASUSTeK COMPUTER INC. version: x.x serial: C3OAAS000774 width: 32 bits capabilities: smbios-2.7 dmi-2.7 smp-1.4 smp configuration: boot=normal chassis=notebook cpus=2 family=Eee PC... *-core description: Motherboard product: 1025C vendor: ASUSTeK COMPUTER INC. physical id: 0 version: x.xx serial: EeePC-0123456789 slot: To be filled by O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 1025C.0701 date: 01/06/2012 size: 64KiB capacity: 1984KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd... *-cpu:0 description: CPU product: Intel(R) Atom(TM) CPU N2800 @ 1.86GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 slot: CPU 1 size: 798MHz capacity: 1865MHz width: 64 bits clock: 533MHz capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc ... configuration: cores=2 enabledcores=1 id=2 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 24KiB capacity: 24KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 2.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 13 slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM [empty] product: [Empty] vendor: [Empty] physical id: 0 serial: [Empty] slot: DIMM0 *-bank:1 description: SODIMM DDR3 Synchronous 1066 MHz (0.9 ns) product: SSZ3128M8-EAEEF vendor: Xicor physical id: 1 serial: 00000004 slot: DIMM1 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns) *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 size: 798MHz capacity: 798MHz capabilities: ht cpufreq configuration: id=2 *-logicalcpu:0 description: Logical CPU physical id: 2.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 capabilities: logical So here I see my processor is effectively a 64 bits one. However, I'm wondering how my motherboard can have a "32 bits width". I've browsed the web to find an answer, without success. I imagine it's just a technical fact that I don't know about. Thanks.

    Read the article

  • Integrating Windows Form Click Once Application into SharePoint 2007 &ndash; Part 2 of 4

    - by Kelly Jones
    In my last post, I explained why we decided to use a Click Once application to solve our business problem. To quickly review, we needed a way for our business users to upload documents to a SharePoint 2007 document library in mass, set the meta data, set the permissions per document, and to do so easily. Let’s look at the pieces that make up our solution.  First, we have the Windows Form application.  This app is deployed using Click Once and calls SharePoint web services in order to upload files and then calls web services to set the meta data (SharePoint columns and permissions).  Second, we have a custom action.  The custom action is responsible for providing our users a link that will launch the Windows app, as well as passing values to it via the query string.  And lastly, we have the web services that the Windows Form application calls.  For our solution, we used both out of the box web services and a custom web service in order to set the column values in the document library as well as the permissions on the documents. Now, let’s look at the technical details of each of these pieces.  (All of the code is downloadable from here: )   Windows Form application deployed via Click Once The Windows Form application, called “Custom Upload”, has just a few classes in it: Custom Upload -- the form FileList.xsd -- the dataset used to track the names of the files and their meta data values SharePointUpload -- this class handles uploading the file SharePointUpload uses an HttpWebRequest to transfer the file to the web server. We had to change this code from a WebClient object to the HttpWebRequest object, because we needed to be able to set the time out value.  public bool UploadDocument(string localFilename, string remoteFilename) { bool result = true; //Need to use an HttpWebRequest object instead of a WebClient object // so we can set the timeout (WebClient doesn't allow you to set the timeout!) HttpWebRequest req = (HttpWebRequest)WebRequest.Create(remoteFilename); try { req.Method = "PUT"; req.Timeout = 60 * 1000; //convert seconds to milliseconds req.AllowWriteStreamBuffering = true; req.Credentials = System.Net.CredentialCache.DefaultCredentials; req.SendChunked = false; req.KeepAlive = true; Stream reqStream = req.GetRequestStream(); FileStream rdr = new FileStream(localFilename, FileMode.Open, FileAccess.Read); byte[] inData = new byte[4096]; int bytesRead = rdr.Read(inData, 0, inData.Length); while (bytesRead > 0) { reqStream.Write(inData, 0, bytesRead); bytesRead = rdr.Read(inData, 0, inData.Length); } reqStream.Close(); rdr.Close(); System.Net.HttpWebResponse response = (HttpWebResponse)req.GetResponse(); if (response.StatusCode != HttpStatusCode.OK && response.StatusCode != HttpStatusCode.Created) { String msg = String.Format("An error occurred while uploading this file: {0}\n\nError response code: {1}", System.IO.Path.GetFileName(localFilename), response.StatusCode.ToString()); LogWarning(msg, "2ACFFCCA-59BA-40c8-A9AB-05FA3331D223"); result = false; } } catch (Exception ex) { LogException(ex, "{E9D62A93-D298-470d-A6BA-19AAB237978A}"); result = false; } return result; } The class also contains the LogException() and LogWarning() methods. When the application is launched, it parses the query string for some initial values.  The query string looks like this: string queryString = "Srv=clickonce&Sec=N&Doc=DMI&SiteName=&Speed=128000&Max=50"; This Srv is the path to the server (my Virtual Machine is name “clickonce”), the Sec is short for security – meaning HTTPS or HTTP, the Doc is the shortcut for which document library to use, and SiteName is the name of the SharePoint site.  Speed is used to calculate an estimate for download speed for each file.  We added this so our users uploading documents would realize how long it might take for clients in remote locations (using slow WAN connections) to download the documents. The last value, Max, is the maximum size that the SharePoint site will allow documents to be.  This allowed us to give users a warning that a file is too large before we even attempt to upload it. Another critical piece is the meta data collection.  We organized our site using SharePoint content types, so when the app loads, it gets a list of the document library’s content types.  The user then select one of the content types from the drop down list, and then we query SharePoint to get a list of the fields that make up that content type.  We used both an out of the box web service, and one that we custom built, in order to get these values. Once we have the content type fields, we then add controls to the form.  Which type of control we add depends on the data type of the field.  (DateTime pickers for date/time fields, etc)  We didn’t write code to cover every data type, since we were working with a limited set of content types and field data types. Here’s a screen shot of the Form, before and after someone has selected the content types and our code has added the custom controls:     The other piece of meta data we collect is the in the upper right corner of the app, “Users with access”.  This box lists the different SharePoint Groups that we have set up and by checking the boxes, the user can set the permissions on the uploaded documents. All of this meta data is collected and submitted to our custom web service, which then sets the values on the documents on the list.  We’ll look at these web services in a future post. In the next post, we’ll walk through the Custom Action we built.

    Read the article

  • HTTP Error 403.18 - Forbidden - asp.net mvc web api

    - by CoffeeCode
    I have deployed the default asp.net mvc 4 web api project to my windows server 2008 RC and am experiensing some issues with calling the web api actions. I'm quite new in the server/iis configuration part. I can open the home page, but the API part doesnt work. I'm getting such an error: HTTP Error 403.18 - Forbidden The specified request cannot be processed in the application pool that is configured for this resource on the Web server Module IIS Web Core Notification BeginRequest Handler StaticFile Error Code 0x00000000 Requested URL http://server.com:80/index.php?p=MvcApplication2_deploy/api/values/ Physical Path C:\Inetpub\vhosts\server.com\Webservice\index.php Logon Method Not yet determined Logon User Not yet determined I have checked Url Rewrite it is empty, have disabled WebDAV and also checked the Handler Mappings every thing seems to be ok there. Could any one give me some hints what could be wrong? Thanks!!!

    Read the article

  • Cisco ASA 5505 - L2TP over IPsec

    - by xraminx
    I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

    Read the article

  • The action can't be completed because the file is open in IIS Worker Process

    - by Bjørn Øyvind Halvorsen
    I have a windows server 2008 R2 running a couple of sites for me, while developing i usually post updates to this server. Now, i tried posting an update but it failed said it has a file in use and the error msg is as follows: "The action can't be completed because the file is open in IIS Worker Process" "Close the file and try again." I have tried stopping the site but this does not help. The site is running in the same application pool as the site that should stay online so a recycle might be breaking the running site (If this is wrong, please correct me). Question is: Is there a way to "Release" the lock that is put on the file without stopping other currently running sites?

    Read the article

  • Standard Protection:Prevent IRC communication

    - by awe
    I have McAffee virusscan on my work computer, and every time I start up, I get 2 log entries like this: Blocked by port blocking rule C:\Program Files\Skype\Phone\Skype.exe Anti-virus Standard Protection:Prevent IRC communication The difference between the two, is that at the end there are 2 different IP addresses (which I don't recognise as belongs to us) with port :6667 on one and :6669 on the other. Although this is logged, Skype seems to work as expected; including talking, chatting and screen sharing (new feature in Skype 4.1). Anyone knows anything about what this is? EDIT: I also have a Skype certified plugin in Skype called Cucku Backup. I did not find anything in the documentation that Cucku is trying to access these ports through Skype, but it could be...? EDIT2: I did a search on the IP addresses in question on www.webyield.net, and resulted in the following: IP 71.251.72.173 (this one used port :6667): Host name: pool-71-251-72-173.tampfl.fios.verizon.net IP 79.87.54.165 (this one used port :6669): Host name: 165.54.87-79.rev.gaoland.net

    Read the article

  • cscript - Invalid procedure call or argument when running a vbs file

    - by quanta
    I've been trying to use check_time.vbs to check the Windows time. Here's the script: http://pastebin.com/NfUrCAqU The help message could be display: C:\Program Files\NSClient++\scripts>cscript //NoLogo check_time.vbs /? check_time.vbs V1.01 Usage: cscript /NoLogo check_time.vbs serverlist warn crit [biggest] Options: serverlist (required): one or more server names, coma-separated warn (required): warning offset in seconds, can be partial crit (required): critical offset in seconds, can be partial biggest (optional): if multiple servers, else use default least offset Example: cscript /NoLogo check_time.vbs myserver1,myserver2 0.4 5 biggest But I get the following error when running: C:\Program Files\NSClient++\scripts>cscript //NoLogo check_time.vbs 0.asia.pool.ntp.org 20 50 C:\Program Files\NSClient++\scripts\check_time.vbs(53, 1) Microsoft VBScript run time error: Invalid procedure call or argument The screenshot: Manually execute w32tm still works fine: What might be the cause of this?

    Read the article

  • ZFS on Linux for RHEL/OEL NFS Sharing

    - by BBK
    I'm trying ZFS on Linux for Oracle Linux (OLE) 6.1 (Red Hat RHEL 6.1 compatible clone). I successfully compiled and installed spl and zfs on it for Oracle Unbreakable Kernel. Zfs is working and I created mirror by zpool create -f -o ashift=12 tank mirror sdb sdc Now I'm trying to share my zfs pool caled "tank/nfs" as mentioned at zfsonlinux site. zfs set sharenfs=on tank/nfs So I created tank/nfs and set nfs to on. Now I'm trying to mount nfs share at local host to test it by mount -t nfs4 127.0.0.1:/tank/nfs /mnt But I get mount.nfs4: mount system call failed So question is: How to share NFS Folder or iSCSI Volumes at OLE rightly and mount it with Linux Client via ZFS on Linux.

    Read the article

  • Most efficient way to connect an ISAPI Dll to a windows service

    - by Mike Trader
    I am writing a custom server for a client. They want scalability so I must use a thread pool and probably I/O completion port to regulate it. The main requirement is that a windows service manage the HTTP requests for a number of reasons. An example of one would be that a client session spans many requests and continuity must be maintained. Another would be that the ISAPI Dll will be in the IIS address space and so it's code will be lean and very carefully implemented. The extensive processing in the Windows service may get unruly for the duration of the lengthy development. If the service crashes it will not take out IIS. Anyway, the remaining decision is how to have these two processes communicate. We have talked about pipes, tcp, global memory and even a single pipe with multiplexed data ala FastCGI. Would love to hear anyones experience with a decision like this.

    Read the article

  • RAIDZ vs RAID1+0

    - by Hiro2k
    Hi guys I just got 4 SSDs for my FreeNAS box. This server is only used to serve a single iSCSI extent to my Citrix XenServer pool and was wondering if I should setup them up in a RAIDZ or a RAID 1+0 configuration. This isn't used for anything in production, just for my test lab so I'm not sure which one is going to be better in this scenario. Will I see a major difference in speed or reliability? Currently the server has three 500GB Western Digital Blue drives and it's dog slow when I deploy a new version of our software on it, hence the upgrade.

    Read the article

  • Windows 7 IIS problem

    - by Carlo
    Hi, the thing is that I just installed IIS in my Windows 7 computer to test it out, but I'm getting this error as soon as I try to load the localhost on my web browser: Service Unavailable HTTP Error 503. The service is unavailable. I found this solution but it didn't work. Anyone has an idea of what's going on? Thanks! More Info: I checked on the Application Pools, as soon as I go to http://localhost/ it stops the application pool of thw website I try.

    Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >