Search Results

Search found 2297 results on 92 pages for 'dmi pool'.

Page 54/92 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

• Postgresql by network

  - by sev

  I have running PostgreSQL sever on 192.168.0.102:5432. postgresql.conf has this line: listen_addresses = '*' and pg_hba.conf has this one: host all all 127.0.0.1/32 trust I have Rails app with same config/database.yml development: adapter: postgresql host: 192.168.0.102 port: 5432 encoding: unicode database: test pool: 5 username: test password: But when I run rake db:migrate I get (I run this from 192.168.0.100) FATAL: no pg_hba.conf entry for host "192.168.0.100", user "test", database "postgres", SSL on FATAL: no pg_hba.conf entry for host "192.168.0.100", user "test", database "postgres", SSL off ... Who can help with this?

  Read the article

• OpenVPN Server Ethernet Bridging Question

  - by Hooplad

  Hello All, I am having a difficult time properly configuring an ethernet bridge using OpenVPN 2.0.9 install on CentOS 5 ( VPN server ). The goal that I am trying to complete is to connect a VM ( instance running on the same CentOS machine ) acting as a Microsoft Business Contact Manager server. I would then like this "BCM server" to serve Windows XP clients on 192.168.1.0/24 network as well as clients connecting from VPN ( 10.8.0.0/24 ). The setup as it is now was based off a known working configuration. The problem with the working configuration was that it would allow to the client to connect and access everything running on the VPN server ( SVN, Samba, VM Server ) but not any computers on the 192.168.1.0/24 network. I must disclose that the VPN server is behind a router/firewall. Ports are being forwarded correctly ( again, clients were able to connect to the VPN server with no problem. netcat confirms the udp port is open as well ). current ifconfig output br0 Link encap:Ethernet HWaddr 00:21:5E:4D:3A:C2 inet addr:192.168.1.169 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::221:5eff:fe4d:3ac2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:846890 errors:0 dropped:0 overruns:0 frame:0 TX packets:3072351 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:42686842 (40.7 MiB) TX bytes:4540654180 (4.2 GiB) eth0 Link encap:Ethernet HWaddr 00:21:5E:4D:3A:C2 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:882641 errors:0 dropped:0 overruns:0 frame:0 TX packets:1781383 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:82342803 (78.5 MiB) TX bytes:2614727660 (2.4 GiB) Interrupt:169 eth1 Link encap:Ethernet HWaddr 00:21:5E:4D:3A:C3 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:650 errors:0 dropped:0 overruns:0 frame:0 TX packets:1347223 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:67403 (65.8 KiB) TX bytes:1959529142 (1.8 GiB) Interrupt:233 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:17452058 errors:0 dropped:0 overruns:0 frame:0 TX packets:17452058 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:94020256229 (87.5 GiB) TX bytes:94020256229 (87.5 GiB) tap0 Link encap:Ethernet HWaddr DE:18:C6:D7:01:63 inet6 addr: fe80::dc18:c6ff:fed7:163/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3086 errors:0 dropped:166 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 b) TX bytes:315099 (307.7 KiB) vmnet1 Link encap:Ethernet HWaddr 00:50:56:C0:00:01 inet addr:192.168.177.1 Bcast:192.168.177.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fec0:1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:4224 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) vmnet8 Link encap:Ethernet HWaddr 00:50:56:C0:00:08 inet addr:192.168.55.1 Bcast:192.168.55.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fec0:8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:4226 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) current route table Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.55.0 * 255.255.255.0 U 0 0 0 vmnet8 192.168.177.0 * 255.255.255.0 U 0 0 0 vmnet1 192.168.1.0 * 255.255.255.0 U 0 0 0 br0 current iptables output Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination server_known_working.conf local banshee port 1194 proto udp dev tap0 ca ca.crt cert banshee_server.crt key banshee_server.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "route 192.168.1.0 255.255.255.0" client-to-client keepalive 10 120 tls-auth ta.key 0 user nobody group nobody persist-key persist-tun status openvpn-status.log verb 4 The following is the current CentOS server config file. server_ethernet_bridged.conf ( current ) local 192.168.1.169 port 1194 proto udp dev tap0 ca ca.crt cert server.crt key server.key dh dh1024.pem ifconfig-pool-persist ipp.txt server-bridge 192.168.1.169 255.255.255.0 192.168.1.200 192.168.1.210 push "route 192.168.1.0 255.255.255.0 192.168.1.1" client-to-client keepalive 10 120 tls-auth ta.key 0 user nobody group nobody persist-key persist-tun status openvpn-status.log verb 6 The following is one of the client's config file that was used with the known working configuration. client.opvn client dev tap proto udp remote XXX.XXX.XXX 1194 resolv-retry infinite nobind persist-key persist-tun ca client.crt cert client.crt key client.key tls-auth client.key 1 verb 3 I have tried the HOWTO provided by OpenVPN as well as others http://www.thebakershome.net/openvpn%5Ftutorial?page=1 with no success. Any help or suggestions would be appreciated.

  Read the article

• Deploying ASP.Net MVC 4 application to IIS 6 - Bundles are not working

  - by ShaneC

  We have a ASP.Net MVC 4 application we are trying to deploy to a Windows 2003 machine running IIS 6. We have it running on a separate app pool and it is setup to use asp.net 4.0. We have a Wildcard application mapping to aspnet_isapi.dll which was required to get the page to appear. The problem we've ran into now is that the bundling which is part of asp.net mvc 4 isn't working. When you try to follow the /js?v=ASDfljkFSDlkjDSF link you get a 404 returned to you. We know it uses extensionless urls but these should be handled by the Wildcard application mapping if I'm not mistaken? Has anyone got this working or have any ideas?

  Read the article

• Why is IIS 7.5 flushing file cache very often?

  - by Steffen

  We're running a Win 2008 R2 server with IIS 7.5 for serving image files. It's only used for static content, and file caching has been set up to cache files for 10 minutes. However the IIS frequently completely flushes the cache (seen by using Perfmon) It's not application pool recycling, it's not because the TTL has expired, so now I'm at a loss :-( I've included a screenshot of the perfmon graph where you can clearly see the issue. Is there anywhere I can see WHY it's doing these flushes ? (Note: I'm aware I could maybe detect it by attaching a debugger to the process, but that's not an option because it's a production server, and it cannot handle the slowdown a debugger would cause)

  Read the article

• How can I set up OpenVPN to accept more than 60 connections?

  - by Robin

  Greetings! We're using OpenVPN and today hit an unexpected connection limit of 60 - even though max-clients is set to the source code default 1024. Server log: Tue Dec 21 13:49:41 2010 MULTI: new incoming connection would exceed maximum number of clients (60) We're slowly adding new clients to the VPN and expect to hit 200 some time next year, if we can get it working. We're running the server on a Win2003 R2. OpenVPN 2.0.9 Server config as follows: local 192.168.10.211 port 1195 proto tcp dev tun dev-node OpenVPN_Vision ca vision_ca.crt cert vision_server.crt key vision_server.key # This file should be kept secret dh vision_dh1024.pem server 192.168.211.0 255.255.255.0 ifconfig-pool-persist vision_ipp.txt ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 ;client-to-client keepalive 10 120 comp-lzo ;max-clients 100 # Default in source code is 1024 persist-key persist-tun status openvpn-status-vision.log log vision.log verb 3 I would greatly appreciate any help or input on this one. Thanks! Best regards, Robin

  Read the article

• IP stops working from time to time

  - by Mattias

  Hi, have a problem that I can't seem to find the reason for. We are running a small network with windows clients(XP/Win7) and windows servers(2008 sp2/2008r2). The domaincontroller is working as DC, DNS, DHCP, VPN. We have a Level1 FBR4000 between internet and our internal network. The problem is that from time to time specific IP-adresses stops working, the only way I have gotten the devices to work again is to exclude the specific IP from the DHCP address pool and getting a new IP, then everything works again. It seems as the specific IP is beeing banned/blocked somewhere but I just can't figure out where. Anyone got an idea as to where I should start to look? I could also point out that I just reinstalled all servers due to a officemove and was hoping to get away from this problem but it just showed up again. This last time it was my iPhone that got stuck through the Wi-Fi...

  Read the article

• Cisco: unable to negotiate IP using IPCP with Windows server

  - by lnk

  I am connecting to Windows server using PPP (for vpn), I establish connection but server does not respond me for my address requests: *Mar 23 00:40:06.055: Vi1 MS-CHAP-V2: I CHALLENGE id 0 len 25 from "MSDC" *Mar 23 00:40:06.063: Vi1 MS CHAP V2: Using hostname from interface CHAP *Mar 23 00:40:06.063: Vi1 MS CHAP V2: Using password from interface CHAP *Mar 23 00:40:06.067: Vi1 MS-CHAP-V2: O RESPONSE id 0 len 69 from "XXX" *Mar 23 00:40:06.087: Vi1 PPP: I pkt type 0xC223, datagramsize 50 link[ppp] *Mar 23 00:40:06.087: Vi1 MS-CHAP-V2: I SUCCESS id 0 len 46 msg is "S=XXX" *Mar 23 00:40:06.087: Vi1 MS CHAP V2 No Password found for : XXX *Mar 23 00:40:06.091: Vi1 MS CHAP V2 Check AuthenticatorResponse Success for : XXX *Mar 23 00:40:06.091: Vi1 IPCP: O CONFREQ [Closed] id 1 len 20 *Mar 23 00:40:06.091: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:06.091: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:07.091: %LINEPROTO-5-UPDOWN: Line protocol on Interface Virtual-Access1, changed state to up *Mar 23 00:40:07.091: Vi1 LCP: O ECHOREQ [Open] id 1 len 12 magic 0x194CAFCF *Mar 23 00:40:07.103: Vi1 LCP-FS: I ECHOREP [Open] id 1 len 12 magic 0x361B62E5 *Mar 23 00:40:07.103: Vi1 LCP-FS: Received id 1, sent id 1, line up *Mar 23 00:40:08.083: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:08.083: Vi1 IPCP: O CONFREQ [REQsent] id 2 len 20 *Mar 23 00:40:08.083: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:08.083: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:10.099: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:10.099: Vi1 IPCP: O CONFREQ [REQsent] id 3 len 20 *Mar 23 00:40:10.099: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:10.099: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:12.115: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:12.115: Vi1 IPCP: O CONFREQ [REQsent] id 4 len 20 *Mar 23 00:40:12.115: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:12.115: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:12.211: Vi1 LCP: O ECHOREQ [Open] id 2 len 12 magic 0x194CAFCF *Mar 23 00:40:12.219: Vi1 LCP-FS: I ECHOREP [Open] id 2 len 12 magic 0x361B62E5 *Mar 23 00:40:12.219: Vi1 LCP-FS: Received id 2, sent id 2, line up *Mar 23 00:40:14.131: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:14.131: Vi1 IPCP: O CONFREQ [REQsent] id 5 len 20 *Mar 23 00:40:14.131: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:14.131: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:16.147: Vi1 IPCP: TIMEout: State REQsent *Mar 23 00:40:16.147: Vi1 IPCP: O CONFREQ [REQsent] id 6 len 20 *Mar 23 00:40:16.147: Vi1 IPCP: VSO OUI 0x00000C kind 1 (0x000A00000C0100000000) *Mar 23 00:40:16.147: Vi1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 23 00:40:17.331: Vi1 LCP: O ECHOREQ [Open] id 3 len 12 magic 0x194CAFCF *Mar 23 00:40:17.343: Vi1 LCP-FS: I ECHOREP [Open] id 3 len 12 magic 0x361B62E5 *Mar 23 00:40:17.343: Vi1 LCP-FS: Received id 3, sent id 3, line up You see: My router asks for address, but only keepalives are on line. But the same server works with windows client!! ! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption service internal ! hostname Router ! boot-start-marker boot-end-marker ! ! no aaa new-model ! resource policy ! ip subnet-zero ! ! ip cef vpdn enable ! vpdn-group pptp request-dialin protocol pptp pool-member 1 initiate-to ip XXXX ! ! ! ! ! ! ! bridge irb ! ! interface ATM0 no ip address shutdown no atm ilmi-keepalive dsl operating-mode auto ! interface FastEthernet0 ! interface FastEthernet1 ! interface FastEthernet2 ! interface FastEthernet3 ! interface Dot11Radio0 no ip address shutdown speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Vlan1 no ip address bridge-group 1 ! interface Dialer0 ip address negotiated encapsulation ppp dialer pool 1 dialer idle-timeout 0 dialer string XXX dialer persistent dialer vpdn dialer-group 1 keepalive 5 3 no cdp enable ppp authentication ms-chap-v2 optional ppp eap refuse ppp chap hostname XXX ppp chap password 0 XXX ppp ipcp mask request ppp ipcp ignore-map ppp ipcp address accept ! interface BVI1 mac-address XXX.XXX.XXX ip address dhcp ! ip classless ip route 172.0.0.0 255.0.0.0 Dialer0 ! no ip http server no ip http secure-server ! dialer-list 1 protocol ip permit ! control-plane ! bridge 1 protocol vlan-bridge bridge 1 route ip ! line con 0 no modem enable line aux 0 line vty 0 4 login ! scheduler max-task-time 5000 end

  Read the article

• Too much free space on FreeNAS - ZFS

  - by Guillaume

  I have a FreeNAS server with 3 x 2 To disks in raidz1. I would expect to have about 4 To of space available. When I run zpool list I get: [root@freenas] ~# zpool list NAME SIZE USED AVAIL CAP HEALTH ALTROOT main_volume 5.44T 3.95T 1.49T 72% ONLINE /mnt I was expecting a size of 4 To. Also, used space as reported by zpool list does not match what's reported by du: [root@freenas] ~# du -sh /mnt/main_volume/ 2.6T /mnt/main_volume/ There are quite a few things that I dont yet completely understand about ZFS. But at the moment I am mostly worried that I misconfigured my system and that I dont have any storage redundancy. How can I make sure I did not do an horrible mistake ... For the sake of completeness, here is the output of zpool status: [root@freenas] ~# zpool status pool: main_volume state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM main_volume ONLINE 0 0 0 raidz1 ONLINE 0 0 0 gptid/d8584e45-5b8a-11d9-b9ea-5404a6630115 ONLINE 0 0 0 gptid/d8f7df30-5b8a-11d9-b9ea-5404a6630115 ONLINE 0 0 0 gptid/d9877cc3-5b8a-11d9-b9ea-5404a6630115 ONLINE 0 0 0 errors: No known data errors

  Read the article

• Restrict a port to a single app

  - by viraptor

  I'd like to restrict a range of udp ports to a single application (or a user). What I'd like to achieve is not simply blocking a bind() from other uids, but also remove the range from a pool that can be auto-assigned. For example, if someone tries to explicitly bind 12345, but doesn't run the specified app, they should get EPERM. If someone tries to bind an unspecified port, they should never try to bind 12345 at random. Is there any system that can help here? I tried browsing apparmor / selinux docs, but they seem to do the blocking part only.

  Read the article

• php5-fpm.sock file doesn't exist

  - by Caballero

  I've just compiled and installed PHP-FPM 5.5.5 following this tutorial. I have ignored the apache setup section, because I'm running nginx. Everything seems to be fine: php -v PHP 5.5.5 (cli) (built: Oct 18 2013 21:56:02) Copyright (c) 1997-2013 The PHP Group Zend Engine v2.5.0, Copyright (c) 1998-2013 Zend Technologies Problem is, I need to link it to my nginx conf via a socket, but /var/run/php5-fpm.sock file doesn't exist. How do I create it? The file /etc/php5/fpm/pool.d/www.conf does include the line listen = /var/run/php5-fpm.sock It is possible (though I'm not sure) that it's a leftover of an older php version 5.5.3 which was installed and removed via apt-get. I'm running Ubuntu 13.10 (Saucy Salamander)

  Read the article

• kernel openvpn segfault

  - by Rex

  e.. I have some trouble about OPENVPN these days.. At first,I find that the OPENVPN is always down. Then I try to restart it.But after a short while,It's down again. Then I check /var/log/messages and find something below openvpn[4338]: xxx.xxx.xxx.xxx:48484 Re-using SSL/TLS context openvpn[4338]: xxx.xxx.xxx.xxx:48484 LZO compression initialized openvpn[4338]: xxx.xxx.xxx.xxx:48484 [abc.abc_] Peer Connection Initiated with xxx.xxx.xxx.xxx:48484 kernel: openvpn[4338]: segfault at 0000000000000018 rip 00002b75ca30ca2e rsp 00007fff153806a0 error 4 Obviously,OPENVPN is Down. So,I just want to know what's wrong here..... P.s. The username should be abc.abc.But it shows that is abc.abc_ Is there something wrong? CentOS 5.4 x64 Linux 2.6.18-238.9.1.el5 My English is very pool... :( Thanks~

  Read the article

• OpenVPN Setup - Service Won't Start

  - by Lenwood

  I'm in the process of setting up OpenVPN on a VPS running Debian 6. I've walked step-by-step through this guide twice now, and I can't get the service to start. When I start the service, the error reported in the log file is: Cannot ioctl TUNSETIFF tun: Inappropriate ioctl for device (errno=25) I've searched the web a few times and I'm not finding anything helpful. I've tried: Changing file permissions: no change Deleting the file: get an error stating no file found (errno=2) Making a folder named "tun": get an error stating no file found (errno=2) I've wiped my installation and completed the steps verbatim twice now. I get no errors along the way, just the error above within my log file. The contents of my server.conf file are listed below, minus all the comments for brevity. Can anyone help? port 1194 proto udp dev tun ca ca.crt cert myserver.crt key myserver.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log log openvpn.log verb 3

  Read the article

• data protector red tapes

  - by Caesar

  I am using HP Data Protector A.06.11 in my organization, with HP EML E-SeriesEML library, with 4 drives using LTO-4 tapes, and i am having some problems. Yesterday I put 5 new tapes in the robot and formatted them. At that time, the robot got just those empty 5 tapes with empty space. (all the rest of the tapes are red, or with protection) Today in the morning after the night (1 backup run at night), and 2 of the new tapes are red (the properties are): Writes : 2 Overwrites : 1 Errors : 9 I format one of them, and check for each drive if the tape become red, no one of the drives do it. In the main pool properties, in media condition got: Valid for : 36 (months) Maximum overwrites : 250

  Read the article

• nginx proxy pass redirect through load balancer

  - by Brian

  I have several backend webservers that are load-balanced using LVS. These machines have only internal non-routable IPs on them. The load-balancer is the only machine with an external IP. This setup works great. I would like to add another webserver for image serving, but it will not be part of the load-balanced pool. Is it possible to proxy pass from the load-balanced web servers to the image server and have the response redirected to the client? Client--external LB--internal web server--internal image server I've gotten proxy pass working when I remove the LB from the equation, but no luck when trying to use it.

  Read the article

• HTTP 401 error in Windows Authentication disappears after swapping Providers

  - by Ray Cheng

  The IIS 7 on Windows 2008 R2 is acting really weird. We deploy our web apps as web sites with appcmd.exe. After they are deployed, if I browse to them, I'll get HTTP 401 errors. The web sites are only have Windows Authentication enabled and the providers are Negotiate and NTLM in such order. But if I swap the providers, the HTTP 401 error goes away. Even if I swap it back, the errors are still gone. So the order of the providers doesn't seem to matter, what matters is the swapping. It must have triggered something. Even if we delete the web site and application pool and reinstall the web sites, the errors are still gone. So far, we can't reproduce it easily since it happens randomly. Has anyone experienced this? How do I go about to troubleshoot it?

  Read the article

• Reimage several of the same model PC by copying the hard disk

  - by Tim Lehner

  I have several of the same machine (Dell Precision T3500) that originally came with Windows 7 Pro (there is a Windows 7 Pro OA product key sticker on top of each one). These were initially downgraded to XP by a former IT colleague, but are now back in the pool of unused machines. I am looking to format and install Windows 7 Pro on one of them using the latest official Win7 installer ISO with SP1 and then clone the hard drive to the other machines. The questions then, are: Does this even make sense, or is there a better way to do this considering I'm only doing it to 6 machines? Does this jive with MS licensing (we are the original purchaser of the machines, and thus, presumably, the license holder...but I'm no expert)? Is it possible to apply the individual 25-char product keys to the cloned machines after cloning? How far can I go in the config process (installing corporate standard apps and such) before I have to clone to the other machines considering the licensing/key questions?

  Read the article

• System time wrong after running ntpdate because DST ignored

  - by Ian Dunn

  When I run ntpdate, my system clock displays the time as an hour behind what it should be. I know that ntpdate does everything in UTC, so I'm guessing there's a timezone setting wrong and it's ignoring Daylight Savings Time, but I can't figure it out. Here's what I've done so far: ln -sf /usr/share/zoneinfo/EST /etc/localtime to set the timezone Set UTC=true in /etc/sysconfig/clock so that DST will be automatically applied date -s hh:mm::ss to set system clock correctly hwclock -systohc --utc to set the hardware clock correctly At this point date and hwclock both display the correct time. But if I then run ntpdate 0.us.pool.ntp.org, the date output is an hour behind what it should be. I've looked at a dozen tutorials and can't figure out what I'm doing wrong. Does anyone have any ideas?

  Read the article

• nginx proxy pass redirect through load balancer

  - by Brian

  I have several backend webservers that are load-balanced using LVS. These machines have only internal non-routable IPs on them. The load-balancer is the only machine with an external IP. This setup works great. I would like to add another webserver for image serving, but it will not be part of the load-balanced pool. Is it possible to proxy pass from the load-balanced web servers to the image server and have the response redirected to the client? Client--external LB--internal web server--internal image server I've gotten proxy pass working when I remove the LB from the equation, but no luck when trying to use it.

  Read the article

• Session Variables lost between pages reloads

  - by Android Addict

  I was forced to move to IIS 7 when the server running our IIS 6 died. Nothing in the web app has changed, but it's obvious the environment has dramatically. The app fails between pages because the session variables are lost during redirect. I am not an expert on app pools but my impression from reading several posts is that the app pool is being recycled immediately. While they give a reason, they offer no help in how to resolve this. Can someone explain to a newb how to properly configure the DefaultAppPool?

  Read the article

• Can't serve files without extension because they "appear to be script" on IIS7.5

  - by madd0

  I created a certain number of static JSON files with no extension in a subfolder of my site. I want to use them for tests. The problem is that IIS is refusing to serve them because : HTTP Error 404.17 - Not Found The requested content appears to be script and will not be served by the static file handler. The folder is a subfolder of an ASP.NET application and I can't create an application just for it, neither can I change the parent application's application pool. Actually, I don't have access to the IIS configuration other than through the web.config file in the folder in question. I assume there must be a way to get a web server to serve static files, right?

  Read the article

• Hyper-V shutdown/start up host causing issues in VMs

  - by Colin Desmond

  I have a single physical host, running 2008 R2 with Hyper-V, all fully updated. On that host I am running 3 clients, a DC, a web server and a SQL Server 2008 R2 SP1. All are running on Windows Server 2008 R2, again all fully patched. Generally all is fine, but sometimes and not repeatably, when I shutdown the host properly, which suspends the Clients, when it all comes up again, SQL Server is no longer running and the IIS App Pool I am running the website in needs to be told which account to run in again! Any ideas!?

  Read the article

• Umbraco on Windows 7 64-bit

  - by HeavyWave

  I'm trying to install Umbraco CMS on Windows 7 64-bit and I get the following exception: [HttpException (0x80004005): Could not load file or assembly 'ImageManipulation, Version=1.0.2105.41209, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Failed to grant minimum permission required. The application pool's trust mode is set to 'Full', all the user permissions are just as on other sites hosted on the same machine. I went through all relevant topics on Umbraco's forum, but all advices are about the trust level. How do I fix this?

  Read the article

• WSS "Cannot connect to the configuration database"

  - by Tim

  I have 64-bit WSS 3.0 installed on a 64-bit Windows 2003 Server. After installing WSS 3.0 I switched IIS to run in 32-bit emulation mode as we have some applications that require this. I'm getting a "Cannot connect to the configuration database" trying to get to the Central Admin page and wondered if: a. The setup I have won't work and I'm wasting my time trying to figure this out. or b. If anyone has any suggestions for resolving the database connection issue? The identity of the app pool that WSS runs under has all the required permissions in SQL so far as I can tell. Any help would be appreciated!

  Read the article

• OpenVPN route missing

  - by dajuric

  I can connect to an OpenVPN server from Windows without any problems. But when I try to connect from Ubuntu 12.04 (start OpenVPN) I receive the following: OpenVPN needs a gateway parameter for a --route option and no default was specified by either --route-gateway or --ifconfig options SERVER IP: 161.53.X.X internal network: 10.0.0.0 / 8 What I need to do ? client configuration: client dev tap proto udp remote 161.53.X.X 1194 resolv-retry infinite nobind ca ca.crt cert client.crt key client.key ns-cert-type server comp-lzo verb 3 server conf: local 161.53.X.X port 1194 proto udp dev tap dev-node OpenVPN ca ca.crt cert server.crt key server.key # This file should be kept secret dh dh1024.pem # DHCP leases addresses to clients server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. push "route 10.0.0.1 255.255.0.0" client-to-client duplicate-cn keepalive 10 120 comp-lzo verb 6

  Read the article

• Why is it good to have website content files on a separate drive other than system (OS) drive?

  - by Jeffrey

  I am wondering what benefits will give me to move all website content files from the default inetpub directory (C:) to something like D:\wwwroot. By default IIS creates separate application pool for each website and I am using the built-in user and group (IURS) as the authentication method. I’ve made sure each site directory has the appropriate permission settings so I am not sure what benefits I will gain. Some of the environment settings are as below: VMWare Windows 2008 R2 64 IIS 7.5 C:\inetpub\site1 C:\inetpub\site2 Also as this article (moving the iis7 inetpub directory to a different drive) points out, not sure if it's worth the trouble to migrate files to a different drive: PLEASE BE AWARE OF THE FOLLOWING: WINDOWS SERVICING EVENTS (I.E. HOTFIXES AND SERVICE PACKS) WOULD STILL REPLACE FILES IN THE ORIGINAL DIRECTORIES. THE LIKELIHOOD THAT FILES IN THE INETPUB DIRECTORIES HAVE TO BE REPLACED BY SERVICING IS LOW BUT FOR THIS REASON DELETING THE ORIGINAL DIRECTORIES IS NOT POSSIBLE.

  Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >