Search Results

Search found 13347 results on 534 pages for 'embedded device'.

Page 51/534 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

• Messed up USB stick doesn't show in blkid

  - by Felix

  I was playing around with a USB stick (booting archlinux with qemu off of it and trying to perform an installation on the same stick at the same time -- brave, I know, but I was just messing around). Now, after failing to boot and install at the same time, it seems I have sort of messed up my stick. What I think happened is that I used cfdisk to wipe everything on it and create one big partition, but formatting it then failed, so now there's a big partition with no filesystem. Just to make it clear: I'm not worried for my stick, I know I can recover it at any point. What I find intriguing is that after plugging the stick into my computer (using Ubuntu), there's no (terminal) way to find out what block device (/dev/sdx) it has associated. The only way I could determine that was with GParted: But blkid shows the following: /dev/sda1: UUID="12F695CFF695B387" LABEL="System Reserved" TYPE="ntfs" /dev/sda2: UUID="A0BAA6EABAA6BC62" TYPE="ntfs" /dev/sdb1: UUID="546aec8b-9ad6-4571-b07a-adba63e25820" TYPE="ext4" /dev/sdb2: UUID="2a8b82d8-6c6e-4053-a446-bab970d93d7c" TYPE="swap" /dev/sdb3: UUID="7cbede7d-c930-4e59-9d1b-01f2d79bd092" TYPE="ext4" No trace of /dev/sdc. My question is: if I didn't have a graphical interface (to use GParted), how would I have known which block device is my stick?

  Read the article

• Can ping device from one computer and not the other

  - by Sean Duggan

  I've recently been assigned to work on a diagnostic program done in C++ which communicates with a piece of electronic equipment. Our normal scenario involves communicating via an RS232 interface, but I've been asked to make our program work over ethernet, source code having been done in Visual Basic. After much thrashing about trying to get the code to work and continuing to get 10049 Winsock errors when I tried to connect, I tried pinging the switch. From the computer the VB program is running on, I can see the switch via ping, nslookup, tracert, and pathping (I was going down the list of programs) and I can do this via URI or IP address. From my laptop, sending the same commands fails every time. They're both using the same network cable and the same USB-to-Ethernet device (I've been swapping them between tests) but one can see the switch and the other cannot. I'm working on the programming end, but the ping results makes me think that there might be a network issue stymieing me. wry grin I'm not much of a network guy, so I'm appealing to expert assistance. Both computers are running Windows XP if that helps. The connection is to an "IP-RS8" device which then connects to our VCU-C units. Each unit is accessible via URI or IP address on the desktop computer we usually have connected to the units (it's running the older VB program that I was asked to lift the networking code from). The connection is made via a USB-to-Ethernet adapter so as to leave the regular Ethernet port available for connecting to the company network. Hmm... come to think of it, I've probably been confusing the issue, talking about pinging "the switch" rather than indicating that it's the devices. My apologies. Communication is generally done with a DLL that uses Winsock functions to make queries for data from the VCU and then to receive. I'm failing when connecting. I haven't found anything on the firewall which should block these commands, but I'll keep poking. I don't know if it's potentially relevant, but on the desktop, the adapter maps to Local Area Connection 3 while on the laptop, it consistently maps to Local Area Connection 2. Currently reading up on DHCP. IPConfig /all results: Desktop Host Name . . . . . . . . . . . . : AMERDAEXXXXXX Primary Dns Suffix . . . . . . . : amer.example.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : COMPANY.com amer.example.com atle.example.com cone.example.com apac.example.com scan.example.com bYX.example.com Ethernet adapter Local Area Connection X: Connection-specific DNS Suffix . : amer.example.com Description . . . . . . . . . . . : Broadcom NetXtreme XYxx Gigabit Controller Physical Address. . . . . . . . . : YY-XX-YB-XX-XX-XX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XYY.XXX.XY.XXX Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XYY.XXX.XY.X DHCP Server . . . . . . . . . . . : XY.XXX.XXY.XX DNS Servers . . . . . . . . . . . : XY.XXX.XXY.XX XY.XXY.XXY.XX Primary WINS Server . . . . . . . : XY.XXX.XXY.X Secondary WINS Server . . . . . . : XY.XXY.XXY.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XY:XX:XX AM Lease Expires . . . . . . . . . . : Sunday, July XX, XYXX XY:XX:XX AM Ethernet adapter Local Area Connection X: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : ASIX axYYYYX USBX.Y to Fast Ethernet Adapter Physical Address. . . . . . . . . : YY-XY-BY-YX-XY-AY Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XY.Y.Y.X Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XY.Y.Y.X DHCP Server . . . . . . . . . . . : XY.Y.Y.XY DNS Servers . . . . . . . . . . . : XY.Y.Y.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XY:XX:XY AM Lease Expires . . . . . . . . . . : Tuesday, August YX, XYXX XX:XY:XY AM Laptop Windows IP Configuration Host Name . . . . . . . . . . . . : AMERLAFYYXXYX Primary Dns Suffix . . . . . . . : amer.example.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : COMPANY.com amer.example.com atle.example.com cone.example.com apac.example.com scan.example.com bYX.example.com Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : amer.example.com Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Connection Physical Address. . . . . . . . . : YY-XY-BY-DY-XB-YX Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : XYY.XXX.XY.XY Subnet Mask . . . . . . . . . . . : XXX.XXX.XXY.Y Default Gateway . . . . . . . . . : XYY.XXX.XY.X DHCP Server . . . . . . . . . . . : XY.XXX.XXY.XX DNS Servers . . . . . . . . . . . : XY.XXX.XXY.XX XY.XXY.XXY.XX Primary WINS Server . . . . . . . : XY.XXX.XXY.X Secondary WINS Server . . . . . . : XY.XXY.XXY.X Lease Obtained. . . . . . . . . . : Thursday, July XX, XYXX XX:XX:XX AM Lease Expires . . . . . . . . . . : Sunday, July XX, XYXX XX:XX:XX AM Ethernet adapter {XYXAAYXX-YEDY-XXYX-YYEX-BYXYXXYEEYEX}: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Nortel IPSECSHM Adapter - Packet Scheduler iniport Physical Address. . . . . . . . . : XX-XX-XX-XX-XX-YY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : Y.Y.Y.Y Subnet Mask . . . . . . . . . . . : Y.Y.Y.Y Default Gateway . . . . . . . . . : Ethernet adapter Leaf Networks Adapter: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Leaf Networks Adapter Physical Address. . . . . . . . . : YY-FF-FA-BC-YF-AY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : X.XYY.XY.XX Subnet Mask . . . . . . . . . . . : XXX.Y.Y.Y Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 3: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : YY-FX-AX-YA-BY-CA Ethernet adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Intel(R) WiFi Link 5300 AGN Physical Address. . . . . . . . . : YY-XX-YA-CX-FC-YE Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : ASIX ax88772 USB2.0 to Fast Ethernet Adapter Physical Address. . . . . . . . . : YY-XY-BY-YX-XY-AY Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : XYX.XYY.X.X Subnet Mask . . . . . . . . . . . : XXX.XXX.XXX.Y Default Gateway . . . . . . . . . :

  Read the article

• Automatically creating volume partitions on boot

  - by Justin Meltzer

  I followed this guide: http://www.mongodb.org/display/DOCS/Amazon+EC2+Quickstart to set up Mongodb. It had me create a RAID 10 array out of the four devices on EBS. Then it had me create a physical volume, a volume group, and three logical volumes out of that RAID 10 array. Lastly it had me create ext4 filesystems out of the logical volumes and mount them. Now the quickstart guide had me put two things in place so that these steps would be replicated on reboot of the system. It had me add some instructions to the mdadm.conf file to automatically create the RAID 10 array, and it also had me add instructions to the fstab file to automatically mount the filesystem for each logical volume. However, the quickstart guide does not have anything for automatically creating the logical volumes from the RAID 10 array. I checked my system and see that each of the four devices are part of a RAID array: $ sudo mdadm -Q /dev/sdh1 /dev/sdh1: is not an md array /dev/sdh1: device 0 in 4 device unknown raid10 array. Use mdadm --examine for more detail. However, the filesystem is never created or mounted from fstab because it's trying to mount it from logical volumes that were never created (or so it seems). My question is, how can I automatically accomplish all the steps from the quickstart guide on a reboot of the system, and what config file do I need to add data to so that I can automatically create these volume partions after the RAID 10 is created but before the filesystem is mounted. Also I'm unsure whether fstab actually creates and mounts the filesystem or just mounts the filesystem.

  Read the article

• How to disable my laptop's defective keyboard?

  - by Kolink

  I have an Alienware M17x R2, and after a couple years of use I started having problems with the keyboard: Intermittently, and without warning or apparent cause (even if I'm not touching the computer), the S key (and more recently the D key) will start firing incessant signals until I hit the offending key. I've been using a USB keyboard, which is conveniently exactly the right size to fit over the built-in keyboard without touching any buttons. However, even as I type the defective keyboard will fire its stream of signals. I have contacted Dell about this, twice in fact. The first time, I was just bluntly told that they don't ship replacement keyboards. The second time I was told that they did, but they were out of stock and they would contact me when they were in stock again. They haven't contacted me since. I can't seem to work out which device to disable in the device manager. Here's a screenshot of what I have: None of the keyboard devices have "Disable" in their context menus, only "Uninstall"... so you'll understand if I'm hesitant to try anything myself. Any advice on how to fix this?

  Read the article

• Accessing the partitions on an VLM volume

  - by projix

  Suppose you have an LVM volume /dev/vg0/mylv. You have presented this as a virtual disk to a virtualised or emulated guest system. During installation the guest system sees it as /dev/sda and partitions it into /dev/sda{1,2,5,6} and completes the installation. Now at some point you need to access those filesystems from within the host system, without running the guest system. fdisk sees these partitions just fine: # fdisk -l /dev/vg0/mylv Device Boot Start End Blocks Id System /dev/vg0/mylv1 2048 684031 340992 83 Linux /dev/vg0/mylv2 686078 20969471 10141697 5 Extended /dev/vg0/mylv5 686080 8290303 3802112 83 Linux /dev/vg0/mylv6 8292352 11980799 1844224 83 Linux However, the devices such as /dev/vg0/mylv1 do not actually exist. I guess that because they're within an LV, the OS does not recognise this type of nesting by default. Is there any way I can prod Linux so that /dev/vg0/mylv1 or equivalent appears and thus becomes mountable within the host system? I understand that it's possible with qemu-nbd, and will use this if necessary. However, I was hoping for something more direct if possible, rather than simulating a network block device and attaching that.

  Read the article

• Sending mail along with embedded image using javamail

  - by Raja D

  Hi All: I want to send mail along with embedded image. For that i have used the below code. Its not full code. Its a part of code Multipart multipart = new MimeMultipart("related"); // Create the message part BodyPart messageBodyPart; messageBodyPart = new MimeBodyPart(); messageBodyPart.setText(msgBody); // msgbody contains the contents of the html file messageBodyPart.setHeader("Content-Type", "text/html"); multipart.addBodyPart(messageBodyPart); //add file attachments DataSource source; File file = new File("D:/sample.jpeg"); if(file.exists()){ // add attachment messageBodyPart = new MimeBodyPart(); source = new FileDataSource(file); messageBodyPart.setDataHandler(new DataHandler(source)); messageBodyPart.setFileName(file.getName()); messageBodyPart.setHeader("Content-ID", "<BarcodeImage>"); messageBodyPart.setDisposition("inline"); multipart.addBodyPart(messageBodyPart); } // Put parts in message msg.setContent(multipart); Transport.send(msg); Problem i am facing is, i can get the mail but cant acle to see the image.. Its not get displaying in the mail. Below is my part of html file <img src=\"cid:BarcodeImage\" alt="Barcode" width="166" height="44" align="right" /> Please help me why the image not getting displayed in the mail and why it is not in the attachment??

  Read the article

• iPhone Device 3.1 SDK Breaks vertical alignment of UITableViewCellStyleValue1 textLabel

  - by user171089

  Can anyone provide an explanation for the following phenomenon? As of the iPhone Device 3.1 SDK, I've found that if a UITableViewCell is of style UITableViewCellStyleValue1 and its detailTextLabel.text is unassigned, then the textLabel does not display in the center of the cell as would be expected. One notable caveat is that this only happens for me when I'm testing on the Device – the iPhone Simulator 3.1 SDK displays the cells correctly. Also, this is not a problem when using the iPhone Device 3.0 SDK. Below is a simple UITableView subclass implementation that demonstrates the problem. @implementation BuggyTableViewController #pragma mark Table view methods // Customize the number of rows in the table view. - (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section { return 3; } // Customize the appearance of table view cells. - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleValue1 reuseIdentifier:CellIdentifier] autorelease]; } switch (indexPath.row) { case 0: cell.textLabel.text = @"detailTextLabel.text unassigned"; break; case 1: cell.textLabel.text = @"detailTextLabel.text = @\"\""; cell.detailTextLabel.text = @""; break; case 2: cell.textLabel.text = @"detailTextLabel.text = @\"A\""; cell.detailTextLabel.text = @"A"; break; default: break; } return cell; } @end

  Read the article

• trying to get the most accurate device location from GPS or Network in Android

  - by arc

  I am trying to determine the most accurate location of a device, in the shortest time possible. I am storing the data as a geopoint, and have it displayed on a mapview. The last time I activated the GPS on my device and let it get a location lock, i was approx 80 miles from where I am now. I have a location manager setup and a location listener. If I do this, I get NULL. myLocOverlay = new MyLocationOverlay(this, mapView); GeoPoint test = myLocOverlay.getMyLocation(); but in the next couple of lines; myLocOverlay.enableMyLocation(); mapView.getOverlays().add(myLocOverlay); With this, the overlay on the map shows the current location. It is using the Network provider, but is also attempting to get a GPS fix (it can't as I am indoors and no where near the top floor). If I construct the geopoint like this; if(lm.getLastKnownLocation("gps") != null) { test = new GeoPoint( (int) (lm.getLastKnownLocation("gps").getLatitude() * 1E6), (int) (lm.getLastKnownLocation("gps").getLongitude() * 1E6)); } else { if(lm.getLastKnownLocation("network") != null) { test = new GeoPoint( (int) (lm.getLastKnownLocation("network").getLatitude() * 1E6), (int) (lm.getLastKnownLocation("network").getLongitude() * 1E6)); } //bad things } Then I get confusing results. If I disable the devices GPS provider then the code moves onto the Network Provider and gives me a fairly accurate result. If I enable the GPS provider, then the geopoint comes back as the last place I allowed the device to get a GPS lock. I want to avoid the above results, and so was looking at using; GeoPoint test = myLocOverlay.getMyLocation(); BUT as I said above, I just get NULL from that. Short of getting the geopoints from both GPS and Network and then comparing them, and disregarding the GPS result if it is say 1 mile out of the Network location - i'm a bit stuck. why doesn't getMyLocation() work, shouldnt that return the GeoPoint of what myLocOverlay is showing on the mapview?

  Read the article

• Error handling in Rails Controller for adding embedded Mongoid documents to Model

  - by Dragonfly

  I have a Item model that has embedded documents. Currently, the following comments_controller code will add a comment to the item successfully. However, if pushing the comment document onto the comments array on item fails, I will not know this. #this does work, but i do not know if the push fails def create comment = Comment.new(:text => params[:text]) @item.comments << comment render :text => comment end I would like to have something like this, but @item.comments << comment does not return true or false: #this does not work def create comment = Comment.new(:text => params[:text]) if @item.comments << comment render :text => comment else render :text => 'oh no' end end Nor does it throw an exception when the document push fails: #this does not work def create begin comment = Comment.new(:text => params[:text]) @item.comments << comment render :text => comment rescue Exception => e render :text => 'oh no' end end Thanks!

  Read the article

• SWI-Prolog as an embedded application in VS2008 C++

  - by H.J. Miri

  I have a C++ application (prog.sln) which is my main program and I want to use Prolog as an embedded logic server (hanoi.pl) int main(int argc, char** argv) { putenv( "SWI_HOME_DIR=C:\\Program Files\\pl" ); argv[0] = "libpl.dll"; argv[1] = "-x"; argv[2] = "hanoi.pl"; argv[3] = NULL; PL_initialise(argc, argv); { fid_t fid = PL_open_foreign_frame(); predicate_t pred = PL_predicate( "hanoi", 1, "user" ); int rval = PL_call_predicate( NULL, PL_Q_NORMAL, pred, 3 ); qid_t qid = PL_open_query( NULL, PL_Q_NORMAL, pred, 3 ); while ( PL_next_solution(qid) ) return qid; PL_close_query(qid); PL_close_foreign_frame(fid); system("PAUSE"); } return 1; system("PAUSE"); } Here is my Prolog source code: :- use_module( library(shlib) ). hanoi( N ):- move( N, left, center, right ). move( 0, _, _, _ ):- !. move( N, A, B, C ):- M is N-1, move( M, A, C, B ), inform( A, B ), move( M, C, B, A ). inform( X, Y ):- write( 'move a disk from ' ), write( X ), write( ' to ' ), write( Y ), nl. I type at the command: plld -o hanoi prog.sln hanoi.pl But it doesn't compile. When I run my C++ app, it says: Undefined procedure: hanoi/1 What is missing/wrong in my code or at the prompt that prevents my C++ app from consulting Prolog? Appreciate any help/pointer.

  Read the article

• Is there an "embedded DBMS" to support multiple writer applications (processes) on the same db files

  - by Amir Moghimi

  I need to know if there is any embedded DBMS (preferably in Java and not necessarily relational) which supports multiple writer applications (processes) on the same set of db files. BerkeleyDB supports multiple readers but just one writer. I need multiple writers and multiple readers. UPDATE: It is not a multiple connection issue. I mean I do not need multiple connections to a running DBMS application (process) to write data. I need multiple DBMS applications (processes) to commit on the same storage files. HSQLDB, H2, JavaDB (Derby) and MongoDB do not support this feature. I think that there may be some File System limitations that prohibit this. If so, is there a File System that allows multiple writers on a single file? Use Case: The use case is a high-throughput clustered system that intends to store its high-volume business log entries into a SAN storage. Storing business logs in separate files for each server does not fit because query and indexing capabilities are needed on the whole biz logs. Because "a SAN typically is its own network of storage devices that are generally not accessible through the regular network by regular devices", I want to use SAN network bandwidth for logging while cluster LAN bandwidth is being used for other server to server and client to server communications.

  Read the article

• Static Data Structures on Embedded Devices (Android in particular)

  - by Mark

  I've started working on some Android applications and have a question regarding how people normally deal with situations where you have a static data set and have an application where that data is needed in memory as one of the standard java collections or as an array. In my current specific issue i have a spreadsheet with some pre-calculated data. It consists of ~100 rows and 3 columns. 1 Column is a string, 1 column is a float, 1 column is an integer. I need access to this data as an array in java. It seems like i could: 1) Encode in XML - This would be cpu intensive to decode in my experience. 2) build into SQLite database - seems like a lot of overhead for static access to data i only need array style access to in ram. 3) Build into binary blob and read in. (never done this in java, i miss void *) 4) Build a python script to take the CSV version of my data and spit out a java function that adds the values to my desired structure with hard coded values. 5) Store a string array via androids resource mechanism and compute the other 2 columns on application load. In my case the computation would require a lot of calls to Math.log, Math.pow and Math.floor which i'd rather not have to do for load time and battery usage reasons. I mostly work in low power embedded applications in C and as such #4 is what i'm used to doing in these situations. It just seems like it should be far easier to gain access to static data structures in java/android. Perhaps I'm just being too battery usage conscious and in my single case i imagine the answer is that it doesn't matter much, but if every application took that stance it could begin to matter. What approaches do people usually take in this situation? Anything I missed?

  Read the article

• log4net from embedded xml?

  - by sanjeev40084

  i have two projects in visual studio. One is the console project while other is regular c# project. In the regular c# project, i have added config file(i.e. Test.config) with log4net section. This file is embedded. <configSections> <section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler, log4net" /> </configSections> <log4net> <appender name="fileAppender" type="log4net.Appender.RollingFileAppender"> <file value="log//testapp.log" /> <appendToFile value="true" /> <rollingStyle value="Size" /> <maxSizeRollBackups value="10" /> <maximumFileSize value="100MB" /> <staticLogFileName value="true" /> <layout type="log4net.Layout.PatternLayout,log4net"> <param name="ConversionPattern" value="%d{ISO8601} [%t] [%-5p] %c - %m%n" /> </layout> </appender> <!-- Setup the root category, add the appenders and set the default priority --> <root> <priority value="ALL" /> <appender-ref ref="fileAppender" /> </root> </log4net> Now in my console project, i want to tell my log4net to load log4net information from (Test.config) which is in another project. This is what i did in the constructor of console project: Assembly asm = Assembly.GetExecutingAssembly(); Stream xmlStream = asm.GetManifestResourceStream("Northwind.Participant.Config.Test.config"); ILog log = LogManager.GetLogger(typeof(ConsoleStart)); 'Northwind.Participant is full namespace. Config - folder where Test.config file is situated. Does anyone know how i can do that?

  Read the article

• h2 (embedded mode ) database files problem

  - by aeter

  There is a h2-database file in my src directory (Java, Eclipse): h2test.db The problem: starting the h2.jar from the command line (and thus the h2 browser interface on port 8082), I have created 2 tables, 'test1' and 'test2' in h2test.db and I have put some data in them; when trying to access them from java code (JDBC), it throws me "table not found exception". A "show tables" from the java code shows a resultset with 0 rows. Also, when creating a new table ('newtest') from the java code (CREATE TABLE ... etc), I cannot see it when starting the h2.jar browser interface afterwards; just the other two tables ('test1' and 'test2') are shown (but then the newly created table 'newtest' is accessible from the java code). I'm inexperienced with embedded databases; I believe I'm doing something fundamentally wrong here. My assumption is, that I'm accessing the same file - once from the java app, and once from the h2 console-browser interface. I cannot seem to understand it, what am I doing wrong here?

  Read the article

• Flex - Flash Builder Design View not showing embedded fonts correctly

  - by Crusader

  Tools: Air 2, Flex SDK 4.1, Flash Builder, Halo component set (NO Spark being used at all) Fonts work perfectly when running the appliction, but not in design view. This effectively makes design view WORTHLESS because it's impossible to properly position components or labels without knowing what the true size is (it changes depending on font...) ... CSS included in root component like so: <fx:Style source="style.css"/> CSS file: /* CSS file */ @namespace mx "library://ns.adobe.com/flex/mx"; global { font-family:Segoe; font-size:14; color:#FFFFFF; } mx|Application, mx|VBox, mx|HBox, mx|Canvas { font-family:Segoe; background-color:#660000; border-color:#222277; color:#FFFFFF; } mx|Button { font-family:Segoe; fill-colors:#660000, #660000, #660000, #660000; color:#FFFFFF; } .... Interestingly (or buggily?), when I try pasting the style tag into a subcomponent (lower than the top level container), I get a bunch of warnings in the subcomponent editor view stating that CSS type selectors are not supported in.. (all the components in the style sheet). Yet, they do work when the application is executed. Huh? This is how I'm embedding the fonts in the root level container: [Embed(source="/assets/segoepr.ttf", fontName="Segoe", mimeType="application/x-font-truetype", embedAsCFF='false')] public static const font:Class; [Embed(source="/assets/segoeprb.ttf", fontName="Segoe", mimeType="application/x-font-truetype", fontWeight="bold", embedAsCFF='false')] public static const font2:Class; So, is there a way to get embedded fonts to work in design view or what?

  Read the article

• Embedded Vimeo Video Callbacks

  - by Andrew

  This post is kind of a follow up to a post I made earlier in regards to HTML5 video callbacks. In that thread, I was given a great piece of code that would allow for the browser to be informed of when the video stops playing and then fire off an action (with jQuery). This is the code I'm currently using: $('video.normal').bind('ended', function(){ $(this).fadeOut().queue(function(){ $(this).siblings('.post-video').fadeIn(); $(this).dequeue(); }); }); Which basically fades the video out when it's completed and brings a poster frame of the video (or similar image) back into view. Well, the scope of the project has changed and now the client is asking for true full screen video and different size videos to be delivered based on user connection speed, something that's a little over my head and a lot over budget. So I've been researching and a Vimeo Plus player seems like a great alternative for visitors using a desktop browser (HD embeds, true full screen, and more). Thing is, I need that above code to continue working in some capacity or another, so does the embedded Vimeo player offer a similar callback that I can utilize? Or am I SOL here? Thanks in advance!

  Read the article

• Intercepting hyperlinks in an embedded Word document

  - by Ryan

  Hello, I'm working on an app which uses embedded Word documents. We have a feature which allows them to insert a small clickable image into the doc - when the user clicks on it, we want the app to open another window based on some data specified by the user when the image was added. What the application does now is: When the image is inserted, the app creates a hyperlink for it and the data is used as the link destination The user ctrl+clicks on the image and the Word document the WindowSelectionChange event The app handles the WindowSelectionChange event and goes to open the specified window This approach worked fine with previous versions, when we had the 11.0 / Word 2003 interop dll's. We upgraded to 12.0/Word 2007 for the upcoming release, and in many cases the event is not firing when I click on the image - sometimes it does, sometimes it doesn't, and I'm descending into the cargo-cult world trying to figure out why - sometimes saving and re-opening the document works, sometimes killing the Word process and starting a new one fixes (or breaks) the feature. My guess is there's something going wrong with the WinSelChg event, but I'm not sure what. The usual process we have for applying the event handler is: try //remove the old one if any { ((Document)myAXFramerControl.ActiveDocument).Application.WindowSelectionChange -= new ApplicationEvents4_WindowSelectionChangeEventHandler(WSC_eventhandlerfunction); } catch{} ((Document)myAXFramerControl.ActiveDocument).Application.WindowSelectionChange += new ApplicationEvents4_WindowSelectionChangeEventHandler(WSC_eventhandlerfunction); Sometimes one or both of these will throw exceptions - usually a NullReferenceException when removing the handler. Adding the handler sometimes throws the "com object that has been separated from its underlying rcw cannot be used" exception, which I don't understand at all - my impression was that this only occurs when you, say, store a reference to the Word application or document and try to use it later. As it stands the WSC event handler is frequently never run; while I'm happy to fiddle with the app until it works once I can't really expect the same of the users who have been happily using this feature for a while now. Any ideas?

  Read the article

• blackberry maps do not show correct location on the device

  - by SWATI

  well frnds my code for maps works well and shows all pics and gradient paths very well on the simulator after simulating the gps ,but it does not works on the device.... The gps on device is working properly as google maps and other work related to gps are working perfectly fine my code if(GPS_Location.lati!=0.0 && GPS_Location.longi!=0.0) { User_latitude = ((GPS_Location.lati)*100000); User_longitude = ((GPS_Location.longi)*100000); User_La = String.valueOf(User_latitude).substring(0, String.valueOf(User_latitude).lastIndexOf('.')); User_Lo = String.valueOf(User_longitude).substring(0, String.valueOf(User_longitude).lastIndexOf('.')); if(param.equals("")) //for find business near me { document1 = "<location-document>" + "<location lon='"+User_Lo+"' lat='"+User_La+"' label='User' />"+ "<location lon='"+User_Lo+"' lat='"+User_La+"' label='"+"User"+"' />"+ "</location-document>"; } if(!param.equals("")) //for the directions { Business_latitude = Double.parseDouble(param.substring(0, param.lastIndexOf(','))); Business_longitude = Double.parseDouble(param.substring(param.lastIndexOf(',')+1,param.length())); Business_latitude = Business_latitude*100000; Business_longitude = Business_longitude*100000; Business_La = String.valueOf(Business_latitude).substring(0, String.valueOf(Business_latitude).lastIndexOf('.')); Business_Lo = String.valueOf(Business_longitude).substring(0, String.valueOf(Business_longitude).lastIndexOf('.')); document1 = "<location-document>" + "<GetRoute>"+ "<location lon='"+User_Lo+"' lat='"+User_La+"' label='User' />"+ "<location lon='"+Business_Lo+"' lat='"+Business_La+"' label='"+"User"+"' />"+ "</GetRoute>"+ "</location-document>"; } Invoke.invokeApplication(Invoke.APP_TYPE_MAPS,new MapsArguments(MapsArguments.ARG_LOCATION_DOCUMENT,document1)); } this code works on simulator but not fine on device. just points a pin indicating user and nothing else what to do????

  Read the article

• Static Libraries on iPhone device

  - by Akusete

  I have two projects, a Cocoa iPhone application and a static library which it uses. I've tested it successfully on the iPhone simulator, but when I try to deploy it to my iPhone device I get (symbol not found) link errors. If I remove the dependancy of the library the project builds/runs fine. I have made sure all the build settings are set to iPhoneOS not the simulator. Im sure its something simple, but has anyone run into similar problems moving from iPhone simulator to device? --EDIT: I have managed to create new projects (one for the application and one for the static library), and successfully get them to run on the iPhone or simulator. But I have a very strange problem... for each specific project I cannot get it working for BOTH the device and the simulator... I have double checked the build settings, made sure the libraries that are being references are for the matching build settings (I believe) but I cannot resolve these linking errors. I think I must be doing something very wrong... all the apple documentation says 'its super simple - one click' but this is giving me a lot of problems. This is probably something to do with xCode build settings, but I cannot seem to understand why selecting the different build platforms and rebuilding the libraries does not work.

  Read the article

• Blackberry application works in simulator but not device

  - by Kai

  I read some of the similar posts on this site that deal with what seems to be the same issue and the responses didn't really seem to clarify things for me. My application works fine in the simulator. I believe I'm on Bold 9000 with OS 4.6. The app is signed. My app makes an HTTP call via 3G to fetch an XML result. type is application/xhtml+xml. In the device, it gives no error. it makes no visual sign of error. I tell the try catch to print the results to the screen and I get nothing. HttpConnection was taken right out of the demos and works fine in sim. Since it gives no error, I begin to reflect back on things I recall reading back when the project began. deviceside=true? Something like that? My request is simply HttpConnection connection = (HttpConnection)Connector.open(url); where url is just a standard url, no get vars. Based on the amount of time I see the connection arrows in the corner of the screen, I assume the app is launching the initial communication to my server, then either getting a bad result, or it gets results and the persistent store is not functioning as expected. I have no idea where to begin with this. Posting code would be ridiculous since it would be basically my whole app. I guess my question is if anyone knows of any major differences with device versus simulator that could cause something like http connection or persistent store to fail? A build setting? An OS restriction? Any standard procedure I may have just not known about that everyone should do before beginning device testing? Thanks

  Read the article

• Optimizing an embedded SELECT query in mySQL

  - by Crazy Serb

  Ok, here's a query that I am running right now on a table that has 45,000 records and is 65MB in size... and is just about to get bigger and bigger (so I gotta think of the future performance as well here): SELECT count(payment_id) as signup_count, sum(amount) as signup_amount FROM payments p WHERE tm_completed BETWEEN '2009-05-01' AND '2009-05-30' AND completed > 0 AND tm_completed IS NOT NULL AND member_id NOT IN (SELECT p2.member_id FROM payments p2 WHERE p2.completed=1 AND p2.tm_completed < '2009-05-01' AND p2.tm_completed IS NOT NULL GROUP BY p2.member_id) And as you might or might not imagine - it chokes the mysql server to a standstill... What it does is - it simply pulls the number of new users who signed up, have at least one "completed" payment, tm_completed is not empty (as it is only populated for completed payments), and (the embedded Select) that member has never had a "completed" payment before - meaning he's a new member (just because the system does rebills and whatnot, and this is the only way to sort of differentiate between an existing member who just got rebilled and a new member who got billed for the first time). Now, is there any possible way to optimize this query to use less resources or something, and to stop taking my mysql resources down on their knees...? Am I missing any info to clarify this any further? Let me know... EDIT: Here are the indexes already on that table: PRIMARY PRIMARY 46757 payment_id member_id INDEX 23378 member_id payer_id INDEX 11689 payer_id coupon_id INDEX 1 coupon_id tm_added INDEX 46757 tm_added, product_id tm_completed INDEX 46757 tm_completed, product_id

  Read the article

• Stopping/Removing an embedded player.

  - by Rajat

  Hi, I am working on a webpage where i have to include an embedded video.The video is hosted on some other domain.I am able to embed the video and autoplay once the web page is loaded.However i have a requirement where i have to remove the div displaying the video once it is played , and in place of the video i have to now display some text. The problem is i am able to do autoplay by the autostart variable in the embed tag...but how do i know that the video has ended.The hosting company only provides an embed tag and they donot have any player apis to use. One way (or rather a workaround) that i feel is to start a eventlistener in the background and see for the total time of the video and when that time is reached remove the content.But the problem is what if the user pauses the video, then also the div would be deleted. I am new to flash.Are there some standard variables or actions that we can pass as flashvars to a swf file to stop a running player or to know the state of the player (Note we are only getting an embed tag from the video hosting site so we donot own that code and they donot have much documenation to help me out with the code). Thanks for your help.

  Read the article

• WCF Async callback setup for polled device

  - by Mark Pim

  I have a WCF service setup to control a USB fingerprint reader from our .Net applications. This works fine and I can ask it to enroll users and so on. The reader allows identification (it tells you that a particular user has presented their finger, as opposed to asking it to verify that a particular user's finger is present), but the device must be constantly polled while in identification mode for its status - when a user is detected the status changes. What I want is for an interested application to notify the service that it wants to know when a user is identified, and provide a callback that gets triggered when this happens. The WCF service will return immediately and spawn a thread in the background to continuously poll the device. This polling could go on for hours at a time if no one tries to log in. What's the best way to acheive this? My service contract is currently defined as follows: [ServiceContract (CallbackContract=typeof(IBiometricCallback))] public interface IBiometricWcfService { ... [OperationContract (IsOneWay = true)] void BeginIdentification(); ... } public interface IBiometricCallback { ... [OperationContract(IsOneWay = true)] void IdentificationFinished(int aUserId, string aMessage, bool aSuccess); ... } In my BeginIdentification() method can I easily spawn a worker thread to poll the device, or is it easier to make the WCF service asynchronous?

  Read the article

• how to query an embedded entity by using a query builder

  - by user577719

  I've searched quite a time for an answer to this question. Following Codesmell: @Entity public class Person { @Id @GeneratedValue(strategy = GenerationType.IDENTITY) protected Integer id; @Column(nullable = true, length = 50) @Size(max = 50) private String name; @Embedded @Valid protected Adress adress; public void setId(Integer id) { this.id = id; } public Integer getId() { return this.id; } public void setName(String name) { this.name = name; } public void getName() { return this.name; } public void setAdress(Adress adress) { this.adress = adress; } public void getAdress() { return this.adress; } } @Embeddable public class Adress { @Column(nullable = false, length = 50) @Size(max = 50) @NotNull private String place; public void setPlace(String place) { this.place = place; } public void getPlace() { return this.place; } } public class PersonDaoJpa { public List<Ort> findByPerson(final Person person) { CriteriaBuilder builder = this.entityManager.getCriteriaBuilder(); CriteriaQuery<Person> query = builder.createQuery(Person.class); Root<Person> rootPerson = query.from(Person.class); List<Predicate> wherePredicates = new ArrayList<Predicate>(); if (person.getName() != null) { wherePredicates.add( builder.like(builder.lower(rootPerson.<String>get("name")), ort.getName().toLowerCase()) ); } Adresse adresse = ort.getAdresse(); if (adresse != null) { if(adresse.getPlace() != null) { // this won't work wherePredicates.add( builder.like(builder.lower(rootPerson.<String>get("person.adress.place")), adresse.getPlace().toLowerCase()) ); } } Predicate whereClause = builder.and(wherePredicates.toArray(new Predicate[0])); query.where(whereClause); return this.entityManager.createQuery(query).getResultList(); } } How can I access the Adress.place through rootPerson? rootPerson.get("place"), or rootPerson.get("adress.place") won't work...

  Read the article

• Send Automated Email through Windows Service that has an embedded image using C#

  - by Refracted Paladin

  I already have a C# windows service that we use internally to monitor a directory on our network and when it detects a change sends off an email using our internal SMTP server to the specified groups of people. Now I need to embedd an image in that automated email. I understand that I need to create an AlternateView and a Linked Resource and use the Linked Resource's cID in the AlternateView, correct. What I do not understand is where do I put the image? Should I add it to my service project and set Copy to Output Directory = Copy Always? If so, how would I then access when creating my LinkedResource? Also, where do I put the image on the Server hosting the Service? Here is what I have so far but it doesn't seem to work. I don't get any errors, that I am aware of, but I do not get an email either. I am guessing it is looking for the image but that I do not have it in the correct location. // This event is called when an object(file,folder) is created in the srcPath void WatcherCreated(object source , FileSystemEventArgs e) { var folderName = e.Name; var folderPath = e.FullPath; MailMessage mail = new MailMessage(); mail.From = new MailAddress("[email protected]"); mail.To.Add("[email protected]"); mail.Subject = "New Enrollment for " + folderName; AlternateView plainView = AlternateView.CreateAlternateViewFromString("This is the plain text view", null, "text/html"); AlternateView htmlView = AlternateView.CreateAlternateViewFromString("Here is an embedded image. <img src=cid:enrollProcessID>", null, "text/html"); LinkedResource imageResourceLink = new LinkedResource("EnrollmentProcess.jpg") {ContentId = "enrollProcessID"}; htmlView.LinkedResources.Add(imageResourceLink); mail.AlternateViews.Add(plainView); mail.AlternateViews.Add(htmlView); var smtp = new SmtpClient("internalSMTP"); smtp.Send(mail); }

  Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >