Search Results

Search found 7768 results on 311 pages for 'enter'.

Page 51/311 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

  • When trying to install Wine on 12.10, 'Sudo' command will not let me type in a password.

    - by Nocturnus
    As the title explains, I have been attempting to install Wine on my laptop which is running 12.10. When I access the command terminal and entered "sudo add-apt-repository ppa:ubuntu-wine/ppa" I was of course met by a password block, when I attempted to enter my password, it flat out wouldn't let me type anything, the only key that got a response from the terminal was "enter" which was met by "incorrect password". To bypass this issue I backed out and used the 'Gksudo' command, this new dialogue box seemed to give me access to sudo commands. I then entered "sudo apt-get update" and "sudo apt-get install wine1.5". Up until the installation everything went fine, but after entering the final command (still using gksudo) The terminal read "the following packages have unmet dependencies" and proceeded to list a bunch of "recommends" So my guess is that Wine hasn't been updated to run on 12.10... Is this true, and is there any other way to open .exe's? Also what was with that funky password misshap? I'm totally new to Ubuntu so I've just been using support pages and tutorials, sorry if I'm a bit naive in these matters...

    Read the article

  • Video Bug after a fresh installation

    - by Matan
    Hello, I just installed Ubuntu 10.10 (I'm brand new to Ubuntu) on my laptop. I seem to have a video bug that I don't know how to deal with. When the log-in screen comes up, the boxes are way off in the corner of the screen (partially off it). When I enter my password, the screen goes black for a few seconds, then returns to the login screen. I can open a Terminal window and enter my login info that way. When I go back to Gnome (Ctrl+Alt+F7 or whatever) it shows me as "logged in" but I still can't get to the desktop. If anyone has any advice, I'd love to hear it--just try to use simple language, please, since I really don't know Linux at all yet! I'm running an Averatec 3700 Series: Mobile AMD Sempron 3000+ 512 MB DDR, 80 GB HDD After looking at this question I tried going in through Failsafe mode (took me a while to figure out the hold-shift-while-booting thing _<) and playing around with the resolution. Setting a somewhat wider resolution did seem to fix things so that I can log into regular GNOME, I think. I'm not sure if this fix will persist, but it seems like it might!

    Read the article

  • "That's cool. But it would be even better if..."

    - by Geertjan
    I recently talked to some NetBeans users who were interested in a demonstration of the features that will be part of NetBeans IDE 7.2. (See the 7.2 New and Noteworthy for the full list.) One of the new features I demonstrated was this one. In an interface declaration, NetBeans IDE 7.2 will provide a hint, as can be seen in the sidebar below: When the lightbulb is clicked, or Alt-Enter is pressed, this will be shown: When the hint is invoked, the user will see this: And then the user will be able to enter the name of a class, and the name of a package, and assuming the defaults above are taken, a class with this content will be generated: package demo; public class WordProcessorImpl implements WordProcessor {     @Override     public String process(String word) {         throw new UnsupportedOperationException("Not supported yet.");     } } When I demonstrated the above, the response from the audience was: "That's cool. But it would be even better if..." it was possible to implement an interface into an existing class. it was possible to select a class and specify the interfaces that it should implement. it was possible, in the context of a NetBeans Platform application, to specify the module where the class should be implemented. So I created some issues: Implement an interface into an existing class http://netbeans.org/bugzilla/show_bug.cgi?id=210804 Select class and specify interfaces to implement http://netbeans.org/bugzilla/show_bug.cgi?id=210805 Allow user to select module for generating implementation http://netbeans.org/bugzilla/show_bug.cgi?id=210807

    Read the article

  • Facebook contest policy no-no?

    - by Fred
    I would like to post a link on a Facebook page where it will exit Facebook entirely and go to a client's website, where people will be on a page (client's) where they can enter their e-mail address to be entered in a temporary database file with rules and disclosures etc., for a draw once the number of entries reaches 100 for instance. Once the number of entries reaches 100, a random winner is picked and notified via E-mail. The functionality is as follows: A link is place on a Facebook page leading to an external page The page is a form to merely enter their email address for a contest The email is placed in a temporary file An automatic E-mail is sent to the address used for confirmation using SHAH-256 hash The person receives the Email saying something to the affect "Please confirm your Email address etc. - If you did not authorize this, simply ignore this message and no further action will be taken". If the person clicks on the confirmation link, the Email is then stored in the database and the person is again notified saying "Thank you for signing up etc." Once others do the same process and the database reaches a certain number, the form is no longer accessible and automatically picks a random Email. Once picked, an Email is automatically sent to the winner stating the instructions, and notifying me also. Once that person clicks yet another confirmation link, the database is then automatically deleted. I have built this myself and have no intentions of breaking any rules, nor jeopardize the work/time/energy I have put into this project. Is this allowed?

    Read the article

  • Why are Win7 IE browers running in IE7 mode?

    - by Skurpi
    On our site we currently have approx. 50% of our IE7 users running Windows 7. However, Win7 was released with IE8 meaning that something is not right. Based on this, we made the assumption that the modern IE browsers enter IE7 compatibility mode on our site. So we placed the "X-UA-Compatible=edge" meta tag on our site in hope to kill off IE7 support. However, after a week, the percentage of IE7 (and IE8) users have gone up for the first time since the start of this year. When looking at the X-UA-Compatible documentation, it is meant to be used for putting your site into an older mode. Is there any other way to make sure that IE doesn't enter compatibility mode? Is there something else we need to look for? And yes, we have so many users on our site that we can't kill off IE7 until it goes down under 2% of unique visitors. EDIT: We use <!doctype html> EDIT2: We haven't been able to reproduce the compatibility mode in our environments either

    Read the article

  • How do spambots work?

    - by rlb.usa
    I have a forum that's getting hit a lot by forum spambots, and of course the best way to defeat something is to know thy enemy. I'll worry about defeating those spambots later, but right now I'd like to know more about them. Reading around, I felt surprised about the lack of thorough information on the subject (or perhaps my ineptness to input the correct search terms for better google results). I'm interested in learning all about spambots. I've asked on other forums and gotten brush-off answers like "Spambots are always users registering on your site." How do forum spambots work? How do they find the 'new user registration' page? (I'm especially surprised because some forums don't have a dedicated URL for this eg, www.forum.com/register.html , but instead use query strings or even other methods invisible to the URL bar) How do they know what to enter into each 'new user registration' field? How do they determine what's a page they can spam / enter data into and what is not? Do they even 'view' this page at all? ..If not, then I'd assume they're communicating with the server directly - how is - this possible? How do they do it? Can forum spambots break CAPTCHAs? Can they solve logic questions (how?)? Math questions? Do they reverse-engineer client-side anti-bot validation scripts? Server-side scripts? What techniques are still valid to prevent them? Where do spambots come from? Is someone sitting behind the computer snickering as they watch their bot destroy site after site? Or are they snickering as they simply 'release' it onto the internet somehow? Are spambots 'run' by an infected computer somewhere? Do they replicate themselves? etc

    Read the article

  • Best approach for tracking dependent state

    - by Pace
    Let's pretend I work on a project tracking application. The application is a database backed, server hosted, web application. In this application there are Projects which have many Activities which have many Tasks. A Task has two date fields an originalDueDate and a projectedDueDate. In addition, there are dynamic fields on the Activities and the Projects which indicate whether the Activity or Project is behind schedule based on the projected due dates of the child tasks and various other variables such as remaining buffer time, etc. There are a number of things that can cause the projectedDueDate to change. For example, an employee working on the project may (via a server request) enter in a shipping delay. Alternatively, a site may (via a server request) enter in an unexpected closure. When any of these things occur I need to not only update the projectedDueDate of the Task but also trigger the corresponding Project and Activity to update as well. What is the best way to do this? I've thought of the observer pattern but I don't keep a single copy of all these objects in memory. When a request comes in, I query the Task in from the database, at that point there is no associated Activity in memory that would be a listener. I could remove the ability to query for Tasks and force the application to query first by Project, then by Activity (in context of Project), then by task (in context of Activity) adding the observer relationships at each step but I'm not sure if that is the best way. I could setup a database event listening system so when a Task modified event is dispatched I have a handler which queries for the Activity at that point. I could simply setup a two-way relationship between Task and Activity so that the Task knows about the parent Activity and when the Task updates his state the Task grabs his parent and updates state. Right now I'm stuck considering all the options and am wondering if any single approach (doesn't have to be a listed approach) is jumping out at others as the best approach.

    Read the article

  • How do I have an arrow follow different height parabolas depending on how long the player holds down a key?

    - by Moondustt
    i'm trying to throw an arrow in my game, but i'm having a hard time trying to realize how to make a good parabola. What I need: The more you hold "enter" stronger the arrow goes. The arrow angle will be always the same, 45 degrees. This is what I have already have: private float velocityHeld = 1f; protected override void Update(GameTime gameTime) { private void GetKeyboardEvent() { if (Keyboard.GetState().IsKeyDown(Keys.Enter) && !released) { timeHeld += velocityHeld; holding = true; } else { if (holding) { released = true; holding = false; lastTimeHeld = timeHeld; } } } if (released && timeHeld > 0) { float alpha = MathHelper.ToRadians(45f); double vy = timeHeld * Math.Sin(alpha); double vx = timeHeld * Math.Cos(alpha); ShadowPosition.Y -= (int)vy; ShadowPosition.X += (int)vx; timeHeld -= velocityHeld; } else { released = false; } } My question is, what do I need to do to make the arrow to go bottom as it loses velocity (timeHeld) to make a perfect parabola?

    Read the article

  • "Launch Failed. Binary Not Found." Snow Leopard and Eclipse C/C++ IDE issue.

    - by Alex
    Not a question, I've just scoured the internet in search of a solution for this problem and thought I'd share it with the good folks of SO. I'll put it in plain terms so that it's accessible to newbs. :) (Apologies if this is the wrong place -- just trying to be helpful.) This issue occurs with almost any user OS X Snow Leopard who tries to use the Eclipse C/C++ IDE, but is particularly annoying for the people (like me) who were using the Eclipse C/C++ IDE in Leopard, and were unable to work with Eclipse anymore when they upgraded. The issue occurs When users go to build/compile/link their software. They get the following error: Launch Failed. Binary Not Found. Further, the "binaries" branch in the project window on the left is simply nonexistent. THE PROBLEM: is that GCC 4.2 (the GNU Compiler Collection) that comes with Snow Leopard compiles binaries in 64-bit by default. Unfortunately, the linker that Eclipse uses does not understand 64-bit binaries; it reads 32-bit binaries. There may be other issues here, but in short, they culminate in no binary being generated, at least not one that Eclipse can read, which translates into Eclipse not finding the binaries. Hence the error. One solution is to add an -arch i686 flag when making the file, but manually making the file every time is annoying. Luckily for us, Snow Leopard also comes with GCC 4.0, which compiles in 32 bits by default. So one solution is merely to link this as the default compiler. This is the way I did it. THE SOLUTION: The GCCs are in /usr/bin, which is normally a hidden folder, so you can't see it in the Finder unless you explicitly tell the system that you want to see hidden folders. Anyway, what you want to do is go to the /usr/bin folder and delete the path that links the GCC command with GCC 4.2 and add a path that links the GCC command with GCC 4.0. In other words, when you or Eclipse try to access GCC, we want the command to go to the compiler that builds in 32 bits by default, so that the linker can read the files; we do not want it to go to the compiler that compiles in 64 bits. The best way to do this is to go to Applications/Utilities, and select the app called Terminal. A text prompt should come up. It should say something like "(Computer Name):~ (Username)$ " (with a space for you user input at the end). The way to accomplish the tasks above is to enter the following commands, entering each one in sequence VERBATIM, and pressing enter after each individual line. cd /usr/bin rm cc gcc c++ g++ ln -s gcc-4.0 cc ln -s gcc-4.0 gcc ln -s c++-4.0 c++ ln -s g++-4.0 g++ Like me, you will probably get an error that tells you you don't have permission to access these files. If so, try the following commands instead: cd /usr/bin sudo rm cc gcc c++ g++ sudo ln -s gcc-4.0 cc sudo ln -s gcc-4.0 gcc sudo ln -s c++-4.0 c++ sudo ln -s g++-4.0 g++ Sudo may prompt you for a password. If you've never used sudo before, try just pressing enter. If that doesn't work, try the password for your main admin account. OTHER POSSIBLE SOLUTIONS You may be able to enter build variables into Eclipse. I tried this, but I don't know enough about it. If you want to feel it out, the flag you will probably need is -arch i686. In earnest, GCC-4.0 worked for me all this time, and I don't see any reason to switch now. There may be a way to alter the default for the compiler itself, but once again, I don't know enough about it. Hope this has been helpful and informative. Good coding!

    Read the article

  • change password.......

    - by shimaTun
    I've created a code to change a password. Now it seem contain an error. When I fill in the form to change password, and click save the error message: You forgot enter your userid! Please try again. I really don’t know what the error message means. Please guys. Help me fix it. Here's is the code: <?php # change password.php //set the page title and include the html header. $page_title = 'Change Your Password'; //include('templates/header.inc'); if(isset($_POST['submit'])){//handle the form require_once('connectioncomplaint.php');//connect to the db. //include "connectioncomplaint.php"; //create a function for escaping the data. function escape_data($data){ global $dbc;//need the connection. if(ini_get('magic_quotes_gpc')){ $data=stripslashes($data); } return mysql_real_escape_string($data); }//end function $message=NULL;//create the empty new variable. //check for a username if(empty($_POST['userid'])){ $u=FALSE; $message .='<p> You forgot enter your userid!</p>'; }else{ $u=escape_data($_POST['userid']); } //check for existing password if(empty($_POST['password'])){ $p=FALSE; $message .='<p>You forgot to enter your existing password!</p>'; }else{ $p=escape_data($_POST['password']); } //check for a password and match againts the comfirmed password. if(empty($_POST['password1'])) { $np=FALSE; $message .='<p> you forgot to enter your new password!</p>'; }else{ if($_POST['password1'] == $_POST['password2']){ $np=escape_data($_POST['password1']); }else{ $np=FALSE; $message .='<p> your new password did not match the confirmed new password!</p>'; } } if($u && $p && $np){//if everything's ok. $query="SELECT userid FROM access WHERE (userid='$u' AND password=PASSWORD('$p'))"; $result=@mysql_query($query); $num=mysql_num_rows($result); if($num == 1){ $row=mysql_fetch_array($result, MYSQL_NUM); //make the query $query="UPDATE access SET password=PASSWORD('$np') WHERE userid=$row[0]"; $result=@mysql_query($query);//run the query. if(mysql_affected_rows() == 1) {//if it run ok. //send an email,if desired. echo '<p><b>your password has been changed.</b></p>'; //include('templates/footer.inc');//include the HTML footer. exit();//quit the script. }else{//if it did not run OK. $message= '<p>Your password could not be change due to a system error.We apolpgize for any inconvenience.</p><p>' .mysql_error() .'</p>'; } }else{ $message= '<p> Your username and password do not match our records.</p>'; } mysql_close();//close the database connection. }else{ $message .='<p>Please try again.</p>'; } }//end of the submit conditional. //print the error message if there is one. if(isset($message)){ echo'<font color="red">' , $message, '</font>'; } ?> <form action="<?php echo $_SERVER['PHP_SELF']; ?>" method="post">

    Read the article

  • boolean in java: what am I doing wrong?

    - by Cheesegraterr
    Hello, I am trying to make my boolean value work. I am new at programming java so I must be missing something simple. I am trying to make it so that if one of the tire pressures is below 35 or over 45 the system outputs "bad inflation" For class me must use a boolean which is what I tried. I cant figure out why this isnt working. No matter what I do the boolean is always true. Any tips? public class tirePressure { private static double getDoubleSystem1 () //Private routine to simply read a double in from the command line { String myInput1 = null; //Store the string that is read form the command line double numInput1 = 0; //Used to store the converted string into an double BufferedReader mySystem; //Buffer to store input mySystem = new BufferedReader (new InputStreamReader (System.in)); // creates a connection to system files or cmd try { myInput1 = mySystem.readLine (); //reads in data from console myInput1 = myInput1.trim (); //trim command cuts off unneccesary inputs } catch (IOException e) //checks for errors { System.out.println ("IOException: " + e); return -1; } numInput1 = Double.parseDouble (myInput1); //converts the string to an double return numInput1; //return double value to main program } static public void main (String[] args) { double TireFR; //double to store input from console double TireFL; double TireBR; double TireBL; boolean goodPressure; goodPressure = false; System.out.println ("Tire Pressure Checker"); System.out.println (" "); System.out.print ("Enter pressure of front left tire:"); TireFL = getDoubleSystem1 (); //read in an double from the user if (TireFL < 35 || TireFL > 45) { System.out.println ("Pressure out of range"); goodPressure = false; } System.out.print ("Enter pressure of front right tire:"); TireFR = getDoubleSystem1 (); //read in an double from the user if (TireFR < 35 || TireFR > 45) { System.out.println ("Pressure out of range"); goodPressure = false; } if (TireFL == TireFR) System.out.print (" "); else System.out.println ("Front tire pressures do not match"); System.out.println (" "); System.out.print ("Enter pressure of back left tire:"); TireBL = getDoubleSystem1 (); //read in an double from the user if (TireBL < 35 || TireBL > 45) { System.out.println ("Pressure out of range"); goodPressure = false; } System.out.print ("Enter pressure of back right tire:"); TireBR = getDoubleSystem1 (); //read in an double from the user if (TireBR < 35 || TireBR > 45) { System.out.println ("Pressure out of range"); goodPressure = false; } if (TireBL == TireBR) System.out.print (" "); else System.out.println ("Back tire pressures do not match"); if (goodPressure = true) System.out.println ("Inflation is OK."); else System.out.println ("Inflation is BAD."); System.out.println (goodPressure); } //mainmethod } // tirePressure Class

    Read the article

  • Wordpress add_meta_box() weirdness

    - by Scott B
    The code below is working nearly flawlessly, however my value for page title on one of my pages keeps coming up empty after a few page refreshes... It sticks for awhile, then it appears to reset to empty. I'm thinking I must have a conflict in the code below, but I can't quite figure it. I'm allowing the user to set a custom page title for posts as well as pages via a custom "post/page title input field). Can anyone see an obvious issue here that might be resetting the page title to blank? // =================== // = POST OPTION BOX = // =================== add_action('admin_menu', 'my_post_options_box'); function my_post_options_box() { if ( function_exists('add_meta_box') ) { //add_meta_box( $id, $title, $callback, $page, $context, $priority ); add_meta_box('post_header', 'Custom Post Header Code (optional)', 'custom_post_images', 'post', 'normal', 'low'); add_meta_box('post_title', 'Custom Post Title', 'custom_post_title', 'post', 'normal', 'high'); add_meta_box('post_title_page', 'Custom Post Title', 'custom_post_title', 'page', 'normal', 'high'); add_meta_box('postexcerpt', __('Excerpt'), 'post_excerpt_meta_box', 'page', 'normal', 'core'); add_meta_box('categorydiv', __('Page Options'), 'post_categories_meta_box', 'page', 'side', 'core'); } } //Adds the custom images box function custom_post_images() { global $post; ?> <div class="inside"> <textarea style="height:70px; width:100%;margin-left:-5px;" name="customHeader" id="customHeader"><?php echo get_post_meta($post->ID, 'customHeader', true); ?></textarea> <p>Enter your custom html code here for the post page header/image area. Whatever you enter here will override the default post header or image listing <b>for this post only</b>. You can enter image references like so &lt;img src='wp-content/uploads/product1.jpg' /&gt;. To show default images, just leave this field empty</p> </div> <?php } //Adds the custom post title box function custom_post_title() { global $post; ?> <div class="inside"> <p><input style="height:25px;width:100%;margin-left:-10px;" type="text" name="customTitle" id="customTitle" value="<?php echo get_post_meta($post->ID, 'customTitle', true); ?>"></p> <p>Enter your custom post/page title here and it will be used for the html &lt;title&gt; for this post page and the Google link text used for this page.</p> </div> <?php } add_action('save_post', 'custom_add_save'); function custom_add_save($postID){ // called after a post or page is saved if($parent_id = wp_is_post_revision($postID)) { $postID = $parent_id; } if ($_POST['customHeader']) { update_custom_meta($postID, $_POST['customHeader'], 'customHeader'); } else { update_custom_meta($postID, '', 'customHeader'); } if ($_POST['customTitle']) { update_custom_meta($postID, $_POST['customTitle'], 'customTitle'); } else { update_custom_meta($postID, '', 'customTitle'); } } function update_custom_meta($postID, $newvalue, $field_name) { // To create new meta if(!get_post_meta($postID, $field_name)){ add_post_meta($postID, $field_name, $newvalue); }else{ // or to update existing meta update_post_meta($postID, $field_name, $newvalue); } } ?>

    Read the article

  • Can you Download the cmid.ctt File

    - by ArtistDigital
    Can you Download the cmid.ctt File Zong.com.pk http://203.82.55.30/websms/default.aspx?txt_Msg=your-name&txt_MNumber=033489667417&txt_Nick=your-name Still Waiting for Reply.... kindly more Developer to broke the Server expection function alphanumeric(alphane) { var numaric = alphane; for(var j=0; j 47 && hh<59) || (hh 64 && hh<91) || (hh 96 && hh<123)) { } else { return false; } } return true; } function charscount(msg, frm) { frm.num_chars.value = 147 - msg.length; // m = msg; } function moveDivDown() { var el = document.getElementById("chatwindow") st = el.scrollTop; el.scrollTop = el.scrollTop + 300 } function trim(str) { return str.replace(/^\s*|\s*$/g,""); } var XMLHttp; var XMLHttp2; /SEND TO SERVER/ function GetXmlHttpObject() { var objXMLHttp=null /* if (window.XMLHttpRequest) { objXMLHttp=new XMLHttpRequest() } else if (window.ActiveXObject) { objXMLHttp=new ActiveXObject("Microsoft.XMLHTTP") }*/ var ua = navigator.userAgent.toLowerCase(); if (!window.ActiveXObject) objXMLHttp = new XMLHttpRequest(); else if (ua.indexOf('msie 5') == -1) objXMLHttp = new ActiveXObject("Msxml2.XMLHTTP"); else objXMLHttp = new ActiveXObject("Microsoft.XMLHTTP"); return objXMLHttp } function updateChatWindow() { var txt_Msg, txt_mNumber, txt_Nick, myMessage txt_MNumber = document.getElementById("txt_MNumber").value txt_Msg = document.getElementById("txt_Msg").value txt_Nick = document.getElementById("txt_Nick").value txt_Nick = trim (txt_Nick) if (txt_Nick.length==0) { alert ("Please enter the Nick Name") document.getElementById("txt_Nick").focus() document.getElementById("txt_Nick").value="" return false; } if (!alphanumeric(txt_Nick)) { alert ("Please enter a valid alphanumeric Nick Name") document.getElementById("txt_Nick").value="" document.getElementById("txt_Nick").focus() return false; } if (txt_Msg.length==0) return false; if (txt_MNumber.length != 10) { alert ("Please Enter a 10 digit recipient mobile number") return false } if (!IsNumeric (txt_MNumber)) { alert ("Please Enter a valid 10 digit recipient mobile number") return false } document.getElementById("txt_Msg").value = "" document.getElementById("num_chars").value = "147" document.getElementById("txt_Msg").focus() myMessage = '' +txt_Nick + ' Says: ' + txt_Msg + '' document.getElementById("chatwindow").innerHTML= document.getElementById("chatwindow").innerHTML + myMessage moveDivDown() XMLHttp = GetXmlHttpObject() if (XMLHttp==null) { alert ("Browser does not support HTTP Request") return false; } var url="default.aspx?" url=url+"txt_Msg="+txt_Msg url=url+"&txt_MNumber="+txt_MNumber url=url+"&txt_Nick="+txt_Nick url=url+"&sid="+Math.random() XMLHttp.onreadystatechange=stateChanged XMLHttp.open("GET",url,true) XMLHttp.send(null) return false; } function stateChanged() { if (XMLHttp.readyState==4 || XMLHttp.readyState=="complete") { try { document.getElementById("chatwindow").innerHTML= document.getElementById("chatwindow").innerHTML+ XMLHttp.responseText moveDivDown() } catch (e){} } } /RECEIVE FROM SERVER/ function checkResponse() { XMLHttp2 = GetXmlHttpObject() if (XMLHttp2==null) { alert ("Browser does not support HTTP Request") return } var url="" url=url+"?r=C" url=url+"&sid="+Math.random() XMLHttp2.onreadystatechange=stateChanged2 XMLHttp2.open("GET",url,true) XMLHttp2.send(null) } function stateChanged2() { if (XMLHttp2.readyState==4 || XMLHttp2.readyState=="complete") { try { document.getElementById("chatwindow").innerHTML= document.getElementById("chatwindow").innerHTML + XMLHttp2.responseText moveDivDown() } catch (e){} //Again Check Updates after 3 Seconds setTimeout("checkResponse()", 2000); } } function IsNumeric(sText) { var ValidChars = "0123456789"; var IsNumber=true; var Char; for (i = 0; i < sText.length && IsNumber == true; i++) { Char = sText.charAt(i); if (ValidChars.indexOf(Char) == -1) { IsNumber = false; } } return IsNumber; }

    Read the article

  • Using the FreeType lib to create text bitmaps to draw in OpenGL 3.x

    - by Andy
    At the moment I not too sure where my problem is. I can draw loaded images as textures no problem, however when I try to generate a bitmap with a char on it I just get a black box. I am confident that the problem is when I generate and upload the texture. Here is the method for that; the top section of the if statement just draws an texture of a image loaded from file (res/texture.jpg) and that draws perfectly. And the else part of the if statement will try to generate and upload a texture with the char (variable char enter) on. Source Code, I will add shaders and more of the C++ if needed but they work fine for the image. void uploadTexture() { if(enter=='/'){ // Draw the image. GLenum imageFormat; glimg::SingleImage image = glimg::loaders::stb::LoadFromFile("res/texture.jpg")->GetImage(0,0,0); glimg::OpenGLPixelTransferParams params = glimg::GetUploadFormatType(image.GetFormat(), 0); imageFormat = glimg::GetInternalFormat(image.GetFormat(),0); glGenTextures(1,&textureBufferObject); glBindTexture(GL_TEXTURE_2D, textureBufferObject); glimg::Dimensions dimensions = image.GetDimensions(); cout << "Texture dimensions w "<< dimensions.width << endl; glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB8, dimensions.width, dimensions.height, 0, params.format, params.type, image.GetImageData()); }else { // Draw the char useing the FreeType Lib FT_Init_FreeType(&ft); FT_New_Face(ft, "arial.ttf", 0, &face); FT_Set_Pixel_Sizes(face, 0, 48); FT_GlyphSlot g = face->glyph; glGenTextures(1,&textureBufferObject); glBindTexture(GL_TEXTURE_2D, textureBufferObject); glPixelStorei(GL_UNPACK_ALIGNMENT, 1); FT_Load_Char(face, enter, FT_LOAD_RENDER); FT_Bitmap theBitmap = g->bitmap; int BitmapWidth = g->bitmap.width; int BitmapHeight = g->bitmap.rows; cout << "draw char - " << enter << endl; cout << "g->bitmap.width - " << g->bitmap.width << endl; cout << "g->bitmap.rows - " << g->bitmap.rows << endl; int TextureWidth =roundUpToNextPowerOfTwo(g->bitmap.width); int TextureHeight =roundUpToNextPowerOfTwo(g->bitmap.rows); cout << "texture width x height - " << TextureWidth <<" x " << TextureHeight << endl; GLubyte* TextureBuffer = new GLubyte[ TextureWidth * TextureWidth ]; for(int j = 0; j < TextureHeight; ++j) { for(int i = 0; i < TextureWidth; ++i) { TextureBuffer[ j*TextureWidth + i ] = (j >= BitmapHeight || i >= BitmapWidth ? 0 : g->bitmap.buffer[ j*BitmapWidth + i ]); } } glTexImage2D(GL_TEXTURE_2D, 0, GL_RGB8, TextureWidth, TextureHeight, 0, GL_RGB8, GL_UNSIGNED_BYTE, TextureBuffer); } }

    Read the article

  • The type or namespace cannot be found (are you missing a using directive or an assembly reference?)

    - by Kumu
    I get the following error when I try to compile my C# program: The type or namespace name 'Login' could not be found (are you missing a using directive or an assembly reference?) using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; namespace FootballLeague { public partial class MainMenu : Form { FootballLeagueDatabase footballLeagueDatabase; Game game; Team team; Login login; //Error here public MainMenu() { InitializeComponent(); changePanel(1); } public MainMenu(FootballLeagueDatabase footballLeagueDatabaseIn) { InitializeComponent(); footballLeagueDatabase = footballLeagueDatabaseIn; } private void Form_Loaded(object sender, EventArgs e) { } private void gameButton_Click(object sender, EventArgs e) { int option = 0; changePanel(option); } private void scoreboardButton_Click(object sender, EventArgs e) { int option = 1; changePanel(option); } private void changePanel(int optionIn) { gamePanel.Hide(); scoreboardPanel.Hide(); string title = "Football League System"; switch (optionIn) { case 0: gamePanel.Show(); this.Text = title + " - Game Menu"; break; case 1: scoreboardPanel.Show(); this.Text = title + " - Display Menu"; break; } } private void logoutButton_Click(object sender, EventArgs e) { login = new Login(); login.Show(); this.Hide(); } Login.cs class: using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; namespace FootballLeagueSystem { public partial class Login : Form { MainMenu menu; public Login() { InitializeComponent(); } private void administratorLoginButton_Click(object sender, EventArgs e) { string username1 = "08247739"; string password1 = "08247739"; if ((userNameTxt.Text.Length) == 0) MessageBox.Show("Please enter your username!"); else if ((passwordTxt.Text.Length) == 0) MessageBox.Show("Please enter your password!"); else if (userNameTxt.Text.Equals("") || passwordTxt.Text.Equals("")) MessageBox.Show("Invalid Username or Password!"); else { if (this.userNameTxt.Text == username1 && this.passwordTxt.Text == password1) MessageBox.Show("Welcome Administrator!", "Administrator Login"); menu = new MainMenu(); menu.Show(); this.Hide(); } } private void managerLoginButton_Click(object sender, EventArgs e) { { string username2 = "1111"; string password2 = "1111"; if ((userNameTxt.Text.Length) == 0) MessageBox.Show("Please enter your username!"); else if ((passwordTxt.Text.Length) == 0) MessageBox.Show("Please enter your password!"); else if (userNameTxt.Text.Equals("") && passwordTxt.Text.Equals("")) MessageBox.Show("Invalid Username or Password!"); else { if (this.userNameTxt.Text == username2 && this.passwordTxt.Text == password2) MessageBox.Show("Welcome Manager!", "Manager Login"); menu = new MainMenu(); menu.Show(); this.Hide(); } } } private void cancelButton_Click(object sender, EventArgs e) { this.Close(); } } } Where is the error? What am I doing wrong?

    Read the article

  • piecing together a jquery form mailer

    - by Joel
    Hi guys, My newbieness is shining through here...I managed to piece together a form mailer that works great, but now I need to add two more fields, and I'm at a loss as to how to do it. Over the months, I have commented out some things I didn't need, but now I'm stuck. I borrowed from this tutorial to make the original form: http://trevordavis.net/blog/tutorial/ajax-forms-with-jquery/ But then I cannibalized it to make an email signup form for a newsletter, so the fields I need are: recipient email (me-hard coded in) senders email address subject (hardcoded in) first name and city in the body of the message For my form, I have this: <div> <?php include('verify.php'); ?> <form action="index_success.php" method="post" id="sendEmail" class="email"> <h3 class="register2">Newsletter Signup:</h3> <ul class="forms email"> <li class="name"><label for="yourName">Name: </label> <input type="text" name="yourName" class="info" id="yourName" value=" " /><br> </li> <li class="city"><label for="yourCity">City: </label> <input type="text" name="yourCity" class="info" id="yourCity" value=" " /><br> </li> <li class="email"><label for="emailFrom">Email: </label> <input type="text" name="emailFrom" class="info" id="emailFrom" value="<?= $_POST['emailFrom']; ?>" /> <?php if(isset($emailFromError)) echo '<span class="error">'.$emailFromError.'</span>'; ?> </li> <li class="buttons email"> <button type="submit" id="submit">Send</button> <input type="hidden" name="submitted" id="submitted" value="true" /> </li> </ul> </form> </div> emailcontact.js: $(document).ready(function(){ $("#submit").click(function(){ $(".error").hide(); var hasError = false; var emailReg = /^([\w-\.]+@([\w-]+\.)+[\w-]{2,4})?$/; var emailFromVal = $("#emailFrom").val(); if(emailFromVal == '') { $("#emailFrom").after('<span class="error">You forgot to enter the email address to send from.</span>'); hasError = true; } else if(!emailReg.test(emailFromVal)) { $("#emailFrom").after('<span class="error">Enter a valid email address to send from.</span>'); hasError = true; } var subjectVal = $("#subject").val(); if(subjectVal == '') { $("#subject").after('<span class="error">You forgot to enter your name.</span>'); hasError = true; } var messageVal = $("#message").val(); if(messageVal == '') { $("#message").after('<span class="error">You forgot to enter your city.</span>'); hasError = true; } if(hasError == false) { $(this).hide(); $("#sendEmail li.buttons").append('<img src="/wp-content/themes/default/images/template/loading.gif" alt="Loading" id="loading" />'); $.post("/includes/sendemail.php", //emailTo: emailToVal, { emailFrom: emailFromVal, subject: subjectVal, message: messageVal }, function(data){ $("#sendEmail").slideUp("normal", function() { $("#sendEmail").before('<h3 class="register2">Success!</h3><p class="emailbox">You are on the Newsletter email list.</p>'); }); } ); } return false; }); }); sendmail.php: <?php $mailTo = $_POST['emailTo']; $mailFrom = $_POST['emailFrom']; $subject = $_POST['yourName']; $message = $_POST['yourCity']; mail('[email protected]','Rattletree Newsletter', 'Name='.$subject. ' City='.$message, "From: ".$mailFrom); ?> Thanks for any help! I'm going crosseyed trying to figure this one out.

    Read the article

  • Mallocing an unsigned char array to store ints

    - by Max Desmond
    I keep getting a segmentation fault when i test the following code. I am currently unable to find an answer after having searched the web. a = (byte *)malloc(sizeof(byte) * x ) ; for( i = 0 ; i < x-1 ; i++ ) { scanf("%d", &y ) ; a[i] = y ; } Both y and x are initialized. X is the size of the array determined by the user. The segmentation fault is on the second to last integer to be added, i found this by adding printf("roar") ; before setting a[i] to y and entering one number at a time. Byte is a typedef of an unsigned char. Note: I've also tried using a[i] = (byte)y ; A is ininitalized as follows byte *a ; If you need to view the entire code it is this: #include <stdio.h> #include <stdlib.h> #include "sort.h" int p_cmp_f () ; int main( int argc, char *argv[] ) { int x, y, i, choice ; byte *a ; while( choice !=2 ) { printf( "Would you like to sort integers?\n1. Yes\n2. No\n" ) ; scanf("%d", &choice ) ; switch(choice) { case 1: printf( "Enter the length of the array: " ) ; scanf( "%d", &x ) ; a = (byte *)malloc(sizeof( byte ) * x ) ; printf( "Enter %d integers to add to the array: ", x ) ; for( i = 0 ; i < x -1 ; i++ ) { scanf( "%d", &y ) ; a[i] = y ; } switch( choice ) { case 1: bubble_sort( a, x, sizeof(int), p_cmp_f ) ; for( i = 0 ; i < x ; i++ ) printf( "%d", a[i] ; break ; case 2: selection_sort( a, x, sizeof(int), p_cmp_f ) ; for( i = 0 ; i < x; i++ ) printf( "%d", a[i] ; break ; case 3: insertion_sort( a, x, sizeof(int), p_cmp_f ) ; for( i = 0 ; i < x ; i++ ) printf( "%d", a[i] ; break ; case 4: merge_sort( a, x, sizeof(int), p_cmp_f ) ; for( i = 0 ; i < x ; i++ ) printf( "%d", a[i] ; break ; case 5: quick_sort( a, x, sizeof(int), p_cmp_f ) ; for( i = 0 ; i < x ; i++ ) printf( "%d", a[i] ; break ; default: printf("Enter either 1,2,3,4, or 5" ) ; break ; } case 2: printf( "Thank you for using this program\n" ) ; return 0 ; break ; default: printf( "Enter either 1 or 2: " ) ; break ; } } free(a) ; return 0 ; } int p_cmp_f( byte *element1, byte *element2 ) { return *((int *)element1) - *((int *)element2) ; }

    Read the article

  • (This is for a project, so yes it is homework) How would I finish this java code?

    - by user2924318
    The task is to create arrays using user input (which I was able to do), then for the second part, use a separate method to sort the array in ascending order then output it. I have gotten it to do everything I need except I don't know how I would get it to sort. The directions say to use a while loop from 0 to the length to find the minimum value then swap that with the 1st, but I don't know how to do this. This is what I have so far: public static void main(String[] args) { Scanner in = new Scanner(System.in); int storage = getNumDigits(in); if(storage == 0){ System.out.print("No digits to store? OK, goodbye!"); System.exit(0); } int []a = new int [storage]; a = getDigits(a, in); displayDigits(a); selectionSort(a); } private static int getNumDigits(Scanner inScanner) { System.out.print("Please enter the number of digits to be stored: "); int stored = inScanner.nextInt(); while(stored < 0){ System.out.println("ERROR! You must enter a non-negative number of digits!"); System.out.println(); System.out.print("Please enter the number of digits to be stored: "); stored = inScanner.nextInt(); } return stored; } private static int[] getDigits(int[] digits, Scanner inScanner) { int length = digits.length; int count = 0; int toBeStored = 0; while(count < length){ System.out.print("Enter integer " +count +": "); toBeStored = inScanner.nextInt(); digits[count] = toBeStored; count++; } return digits; } private static void displayDigits(int[] digits) { int len = digits.length; System.out.println(); System.out.println("Array before sorting:"); System.out.println("Number of digits in array: " +len); System.out.print("Digits in array: "); for(int cnt = 0; cnt < len-1; cnt++){ System.out.print(digits[cnt] + ", "); } System.out.println(digits[len-1]); } private static void selectionSort(int[] digits) { int l = digits.length; System.out.println(); System.out.println("Array after sorting:"); System.out.println("Number of digits in array: " +l); System.out.print("Digits in array: "); int index = 0; int value = digits[0]; int indVal = digits[index]; while(index < l){ indVal = digits[index]; if(indVal <= value){ indVal = value; digits[index] = value; index++; } else if(value < indVal){ index++; } System.out.print(value); //This is where I don't know what to do. } }

    Read the article

  • How can I fix my program from crashing in C++?

    - by Rachel
    I'm very new to programming and I am trying to write a program that adds and subtracts polynomials. My program sometimes works, but most of the time, it randomly crashes and I have no idea why. It's very buggy and has other problems I'm trying to fix, but I am unable to really get any further coding done since it crashes. I'm completely new here but any help would be greatly appreciated. Here's the code: #include <iostream> #include <cstdlib> using namespace std; int getChoice(void); class Polynomial10 { private: double* coef; int degreePoly; public: Polynomial10(int max); //Constructor for a new Polynomial10 int getDegree(){return degreePoly;}; void print(); //Print the polynomial in standard form void read(); //Read a polynomial from the user void add(const Polynomial10& pol); //Add a polynomial void multc(double factor); //Multiply the poly by scalar void subtract(const Polynomial10& pol); //Subtract polynom }; void Polynomial10::read() { cout << "Enter degree of a polynom between 1 and 10 : "; cin >> degreePoly; cout << "Enter space separated coefficients starting from highest degree" << endl; for (int i = 0; i <= degreePoly; i++) { cin >> coef[i]; } } void Polynomial10::print() { for(int i=0;i<=degreePoly;i++) { if(coef[i] == 0) { cout << ""; } else if(i>=0) { if(coef[i] > 0 && i!=0) { cout<<"+"; } if((coef[i] != 1 && coef[i] != -1) || i == degreePoly) { cout << coef[i]; } if((coef[i] != 1 && coef[i] != -1) && i!=degreePoly ) { cout << "*"; } if (i != degreePoly && coef[i] == -1) { cout << "-"; } if(i != degreePoly) { cout << "x"; } if ((degreePoly - i) != 1 && i != degreePoly) { cout << "^"; cout << degreePoly-i; } } } } void Polynomial10::add(const Polynomial10& pol) { for(int i = 0; i<degreePoly; i++) { int degree = degreePoly; coef[degreePoly-i] += pol.coef[degreePoly-(i+1)]; } } void Polynomial10::subtract(const Polynomial10& pol) { for(int i = 0; i<degreePoly; i++) { coef[degreePoly-i] -= pol.coef[degreePoly-(i+1)]; } } void Polynomial10::multc(double factor) { //int degreePoly=0; //double coef[degreePoly]; cout << "Enter the scalar multiplier : "; cin >> factor; for(int i = 0; i<degreePoly; i++) { coef[i] *= factor; } }; Polynomial10::Polynomial10(int max) { degreePoly=max; coef = new double[degreePoly]; for(int i; i<degreePoly; i++) { coef[i] = 0; } } int main() { int choice; Polynomial10 p1(1),p2(1); cout << endl << "CGS 2421: The Polynomial10 Class" << endl << endl << endl; cout << "0. Quit\n" << "1. Enter polynomial\n" << "2. Print polynomial\n" << "3. Add another polynomial\n" << "4. Subtract another polynomial\n" << "5. Multiply by scalar\n\n"; int choiceFirst = getChoice(); if (choiceFirst != 1) { cout << "Enter a Polynomial first!"; } if (choiceFirst == 1) {choiceFirst = choice;} while(choice != 0) { switch(choice) { case 0: return 0; case 1: p1.read(); break; case 2: p1.print(); break; case 3: p2.read(); p1.add(p2); cout << "Updated Polynomial: "; p1.print(); break; case 4: p2.read(); p1.subtract(p2); cout << "Updated Polynomial: "; p1.print(); break; case 5: p1.multc(10); cout << "Updated Polynomial: "; p1.print(); break; } choice = getChoice(); } return 0; } int getChoice(void) { int c; cout << "\nEnter your choice : "; cin >> c; return c; }

    Read the article

  • Changing the action of a form with javascript/jquery

    - by Micah
    I'm having an issue that is driving me crazy. I'm trying to modify the openid-selector to support facebook. I'm using RPXNow as my provider so it requires the form to be submitted to a different url than the standard. For example. RpxNow requires me to setup my form like this: <form action="https://wikipediamaze.rpxnow.com/openid/start?token_url=..."> This works for every provider except for facebook and myspace. Those require the form to be posted to a different url like this: <form action="https://wikipediamaze.rpxnow.com/facebook/start?token_url=..."> and <form action="https://wikipediamaze.rpxnow.com/myspace/start?token_url=..."> The open id selector has a bunch of buttons on the form each representing the openid providers. What I'm trying to do is detect when the facebook or myspace button is clicked and changed the action on the form before submitting. However it's not working. Here is my code. I've tried several variations all with the same "not supported" exception $("#openid_form").attr("action", form_url) document.forms[0].action = form_url Any suggestions? Update Here are more details on the code. I've ommitted some for brevity. The only thing i've done is added the facebook section to the "providers_large" object (which successfully adds the logo to the website), and instead of supply a url identifying the user, I'm creating a property called "form_url" which is what I want to set the action of my form to. If you look at the section title "Provider image click" you'll see where I'm checking for the presence of the property "form_url" and using jquery to change the action and submit the form. However when I step through the javascript in debug mode it tells me it's an ivalid operation. var providers_large = { google: { name: 'Google', url: 'https://www.google.com/accounts/o8/id' }, facebook: { name: 'Facebook', form_url: 'http://wikipediamaze.rpxnow.com/facebook/start?token_url=http://www.wikipediamaze.com/Accounts/Logon' }, }; var providers_small = { myopenid: { name: 'MyOpenID', label: 'Enter your MyOpenID username.', url: 'http://{username}.myopenid.com/' }, livejournal: { name: 'LiveJournal', label: 'Enter your Livejournal username.', url: 'http://{username}.livejournal.com/' }, flickr: { name: 'Flickr', label: 'Enter your Flickr username.', url: 'http://flickr.com/{username}/' }, technorati: { name: 'Technorati', label: 'Enter your Technorati username.', url: 'http://technorati.com/people/technorati/{username}/' }, wordpress: { name: 'Wordpress', label: 'Enter your Wordpress.com username.', url: 'http://{username}.wordpress.com/' }, blogger: { name: 'Blogger', label: 'Your Blogger account', url: 'http://{username}.blogspot.com/' }, verisign: { name: 'Verisign', label: 'Your Verisign username', url: 'http://{username}.pip.verisignlabs.com/' }, vidoop: { name: 'Vidoop', label: 'Your Vidoop username', url: 'http://{username}.myvidoop.com/' }, verisign: { name: 'Verisign', label: 'Your Verisign username', url: 'http://{username}.pip.verisignlabs.com/' }, claimid: { name: 'ClaimID', label: 'Your ClaimID username', url: 'http://claimid.com/{username}' } }; var providers = $.extend({}, providers_large, providers_small); var openid = { cookie_expires: 6*30, // 6 months. cookie_name: 'openid_provider', cookie_path: '/', img_path: 'images/', input_id: null, provider_url: null, init: function(input_id) { var openid_btns = $('#openid_btns'); this.input_id = input_id; $('#openid_choice').show(); $('#openid_input_area').empty(); // add box for each provider for (id in providers_large) { openid_btns.append(this.getBoxHTML(providers_large[id], 'large', '.gif')); } if (providers_small) { openid_btns.append('<br/>'); for (id in providers_small) { openid_btns.append(this.getBoxHTML(providers_small[id], 'small', '.ico')); } } $('#openid_form').submit(this.submit); var box_id = this.readCookie(); if (box_id) { this.signin(box_id, true); } }, getBoxHTML: function(provider, box_size, image_ext) { var box_id = provider["name"].toLowerCase(); return '<a title="'+provider["name"]+'" href="javascript: openid.signin(\''+ box_id +'\');"' + ' style="background: #FFF url(' + this.img_path + box_id + image_ext+') no-repeat center center" ' + 'class="' + box_id + ' openid_' + box_size + '_btn"></a>'; }, /* Provider image click */ signin: function(box_id, onload) { var provider = providers[box_id]; if (! provider) { return; } this.highlight(box_id); this.setCookie(box_id); // prompt user for input? if (provider['label']) { this.useInputBox(provider); this.provider_url = provider['url']; } else if(provider['form_url']) { $('#openid_form').attr("action", provider['form_url']); $('#openid_form').submit(); } else { this.setOpenIdUrl(provider['url']); if (! onload) { $('#openid_form').submit(); } } }, /* Sign-in button click */ submit: function() { var url = openid.provider_url; if (url) { url = url.replace('{username}', $('#openid_username').val()); openid.setOpenIdUrl(url); } return true; }, setOpenIdUrl: function (url) { var hidden = $('#'+this.input_id); if (hidden.length > 0) { hidden.value = url; } else { $('#openid_form').append('<input type="hidden" id="' + this.input_id + '" name="' + this.input_id + '" value="'+url+'"/>'); } }, highlight: function (box_id) { // remove previous highlight. var highlight = $('#openid_highlight'); if (highlight) { highlight.replaceWith($('#openid_highlight a')[0]); } // add new highlight. $('.'+box_id).wrap('<div id="openid_highlight"></div>'); }, setCookie: function (value) { var date = new Date(); date.setTime(date.getTime()+(this.cookie_expires*24*60*60*1000)); var expires = "; expires="+date.toGMTString(); document.cookie = this.cookie_name+"="+value+expires+"; path=" + this.cookie_path; }, readCookie: function () { var nameEQ = this.cookie_name + "="; var ca = document.cookie.split(';'); for(var i=0;i < ca.length;i++) { var c = ca[i]; while (c.charAt(0)==' ') c = c.substring(1,c.length); if (c.indexOf(nameEQ) == 0) return c.substring(nameEQ.length,c.length); } return null; }, useInputBox: function (provider) { var input_area = $('#openid_input_area'); var html = ''; var id = 'openid_username'; var value = ''; var label = provider['label']; var style = ''; if (label) { html = '<p>' + label + '</p>'; } if (provider['name'] == 'OpenID') { id = this.input_id; value = 'http://'; style = 'background:#FFF url('+this.img_path+'openid-inputicon.gif) no-repeat scroll 0 50%; padding-left:18px;'; } html += '<input id="'+id+'" type="text" style="'+style+'" name="'+id+'" value="'+value+'" />' + '<input id="openid_submit" type="submit" value="Sign-In"/>'; input_area.empty(); input_area.append(html); $('#'+id).focus(); } };

    Read the article

  • Integrate Nitro PDF Reader with Windows 7

    - by Matthew Guay
    Would you like a lightweight PDF reader that integrates nicely with Office and Windows 7?  Here we look at the new Nitro PDF Reader, a nice PDF viewer that also lets you create and markup PDF files. Adobe Reader is the de-facto PDF viewer, but it only lets you view PDFs and not much else.  Additionally, it doesn’t fully integrate with 64-bit editions of Vista and Windows 7.  There are many alternate PDF readers, but Nitro PDF Reader is a new entry into this field that offers more features than most PDF readers.  From the creators of the popular free PrimoPDF printer, the new Reader lets you create PDFs from a variety of file formats and markup existing PDFs with notes, highlights, stamps, and more in addition to viewing PDFs.  It also integrates great with Windows 7 using the Office 2010 ribbon interface. Getting Started Download the free Nitro PDF Reader (link below) and install as normal.  Nitro PDF Reader has separate versions for 32 & 64-bit editions of Windows, so download the correct one for your computer. Note:  Nitro PDF Reader is still in Beta testing, so only install if you’re comfortable with using beta software. On first run, Nitro PDF Reader will ask if you want to make it the default PDF viewer.  If you don’t want to, make sure to uncheck the box beside Always perform this check to keep it from opening this prompt every time you use it. It will also open an introductory PDF the first time you run it so you can quickly get acquainted with its features. Windows 7 Integration One of the first things you’ll notice is that Nitro PDF Reader integrates great with Windows 7.  The ribbon interface fits right in with native applications such as WordPad and Paint, as well as Office 2010. If you set Nitro PDF Reader as your default PDF viewer, you’ll see thumbnails of your PDFs in Windows Explorer. If you turn on the Preview Pane, you can read full PDFs in Windows Explorer.  Adobe Reader lets you do this in 32 bit versions, but Nitro PDF works in 64 bit versions too. The PDF preview even works in Outlook.  If you receive an email with a PDF attachment, you can select the PDF and view it directly in the Reading Pane.  Click the Preview file button, and you can uncheck the box at the bottom so PDFs will automatically open for preview if you want.   Now you can read your PDF attachments in Outlook without opening them separately.  This works in both Outlook 2007 and 2010. Edit your PDFs Adobe Reader only lets you view PDF files, and you can’t save data you enter in PDF forms.  Nitro PDF Reader, however, gives you several handy markup tools you can use to edit your PDFs.  When you’re done, you can save the final PDF, including information entered into forms. With the ribbon interface, it’s easy to find the tools you want to edit your PDFs. Here we’ve highlighted text in a PDF and added a note to it.  We can now save these changes, and they’ll look the same in any PDF reader, including Adobe Reader. You can also enter new text in PDFs.  This will open a new tab in the ribbon, where you can select basic font settings.  Select the Click To Finish button in the ribbon when you’re finished editing text.   Or, if you want to use the text or pictures from a PDF in another application, you can choose to extract them directly in Nitro PDF Reader.  Create PDFs One of the best features of Nitro PDF Reader is the ability to create PDFs from almost any file.  Nitro adds a new virtual printer to your computer that creates PDF files from anything you can print.  Print your file as normal, but select the Nitro PDF Creator (Reader) printer. Enter a name for your PDF, select if you want to edit the PDF properties, and click Create. If you choose to edit the PDF properties, you can add your name and information to the file, select the initial view, encrypt it, and restrict permissions. Alternately, you can create a PDF from almost any file by simply drag-and-dropping it into Nitro PDF Reader.  It will automatically convert the file to PDF and open it in a new tab in Nitro PDF. Now from the File menu you can send the PDF as an email attachment so anyone can view it. Make sure to save the PDF before closing Nitro, as it does not automatically save the PDF file.   Conclusion Nitro PDF Reader is a nice alternative to Adobe Reader, and offers some features that are only available in the more expensive Adobe Acrobat.  With great Windows 7 integration, including full support for 64-bit editions, Nitro fits in with the Windows and Office experience very nicely.  If you have tried out Nitro PDF Reader leave a comment and let us know what you think. Link Download Nitro PDF Reader Similar Articles Productive Geek Tips Install Adobe PDF Reader on Ubuntu EdgySubscribe to RSS Feeds in Chrome with a Single ClickChange Default Feed Reader in FirefoxFix for Windows Explorer Folder Pane in XP Becomes Grayed OutRemove "Please wait while the document is being prepared for reading" Message in Adobe Reader 8 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 tinysong gives a shortened URL for you to post on Twitter (or anywhere) 10 Superb Firefox Wallpapers OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes

    Read the article

  • How to Assign a Static IP Address in XP, Vista, or Windows 7

    - by Mysticgeek
    When organizing your home network it’s easier to assign each computer it’s own IP address than using DHCP. Here we will take a look at doing it in XP, Vista, and Windows 7. If you have a home network with several computes and devices, it’s a good idea to assign each of them a specific address. If you use DHCP (Dynamic Host Configuration Protocol), each computer will request and be assigned an address every time it’s booted up. When you have to do troubleshooting on your network, it’s annoying going to each machine to figure out what IP they have. Using Static IPs prevents address conflicts between devices and allows you to manage them more easily. Assigning IPs to Windows is essentially the same process, but getting to where you need to be varies between each version. Windows 7 To change the computer’s IP address in Windows 7, type network and sharing into the Search box in the Start Menu and select Network and Sharing Center when it comes up.   Then when the Network and Sharing Center opens, click on Change adapter settings. Right-click on your local adapter and select Properties. In the Local Area Connection Properties window highlight Internet Protocol Version 4 (TCP/IPv4) then click the Properties button. Now select the radio button Use the following IP address and enter in the correct IP, Subnet mask, and Default gateway that corresponds with your network setup. Then enter your Preferred and Alternate DNS server addresses. Here we’re on a home network and using a simple Class C network configuration and Google DNS. Check Validate settings upon exit so Windows can find any problems with the addresses you entered. When you’re finished click OK. Now close out of the Local Area Connections Properties window. Windows 7 will run network diagnostics and verify the connection is good. Here we had no problems with it, but if you did, you could run the network troubleshooting wizard. Now you can open the command prompt and do an ipconfig  to see the network adapter settings have been successfully changed.   Windows Vista Changing your IP from DHCP to a Static address in Vista is similar to Windows 7, but getting to the correct location is a bit different. Open the Start Menu, right-click on Network, and select Properties. The Network and Sharing Center opens…click on Manage network connections. Right-click on the network adapter you want to assign an IP address and click Properties. Highlight Internet Protocol Version 4 (TCP/IPv4) then click the Properties button. Now change the IP, Subnet mask, Default Gateway, and DNS Server Addresses. When you’re finished click OK. You’ll need to close out of Local Area Connection Properties for the settings to go into effect. Open the Command Prompt and do an ipconfig to verify the changes were successful.   Windows XP In this example we’re using XP SP3 Media Center Edition and changing the IP address of the Wireless adapter. To set a Static IP in XP right-click on My Network Places and select Properties. Right-click on the adapter you want to set the IP for and select Properties. Highlight Internet Protocol (TCP/IP) and click the Properties button. Now change the IP, Subnet mask, Default Gateway, and DNS Server Addresses. When you’re finished click OK. You will need to close out of the Network Connection Properties screen before the changes go into effect.   Again you can verify the settings by doing an ipconfig in the command prompt. In case you’re not sure how to do this, click on Start then Run.   In the Run box type in cmd and click OK. Then at the prompt type in ipconfig and hit Enter. This will show the IP address for the network adapter you changed.   If you have a small office or home network, assigning each computer a specific IP address makes it a lot easier to manage and troubleshoot network connection problems. Similar Articles Productive Geek Tips Change Ubuntu Desktop from DHCP to a Static IP AddressChange Ubuntu Server from DHCP to a Static IP AddressVista Breadcrumbs for Windows XPCreate a Shortcut or Hotkey for the Safely Remove Hardware DialogCreate a Shortcut or Hotkey to Eject the CD/DVD Drive TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos

    Read the article

  • Connecting to DB2 from SSIS

    - by Christopher House
    The project I'm currently working on involves moving various pieces of data from a legacy DB2 environment to some SQL Server and flat file locations.  Most of the data flows are real time, so they were a natural fit for the client's MQSeries on their iSeries servers and BizTalk to handle the messaging.  Some of the data flows, however, are daily batch type transmissions.  For the daily batch transmissions, it was decided that we'd use SSIS to pull the data direct from DB2 to either a SQL Server or flat file.  I'm not at all an SSIS guy, I've done a bit here and there, but mainly for situations were we needed to move data from a dev environment to QA, mostly informal stuff like that.  And, as much as I'm not an SSIS guy, I'm even less a DB2/iSeries guy.  Prior to this engagement, my knowledge of DB2 was limited to the fact that it's an IBM product and that it was probably a DBMS flatform (that's what the DB in DB2 means, right?).   One of my first goals when I came onto this project was to develop of POC SSIS package to pull some data from DB2 and dump it to a flat file.  It sounded like a pretty straight forward task.  As always, the devil is in the details.  Configuring the DB2 connection manager took a bit of trial and error.  As such, I thought I'd post my experiences here in hopes that they might save someone the efforts I went through.  That being said, please keep in mind, as I pointed out, I'm not at all a DB2 guy, so my terminology and explanations may not be 100% spot on. Before you get started, you need to figure out how you're going to connect to DB2.  From the research I did, it looks like there are a few options.  IBM has both an OLE DB and .Net data provider which can be found here.  I installed their client access tools and tried to use both the .Net and OLE DB providers but I received an error message from both when attempting to connect to the iSeries that indicated I needed a license for a product called DB2 Connect.  I inquired with one of my client's iSeries resources about a license for this product and it appears they didn't have one, so that meant the IBM drivers were out.  The other option that I found quite a bit of discussion around was Microsoft's OLE DB Provider for DB2.  This driver is part of the feature pack for SQL Server 2008 Enterprise Edition and can be downloaded here. As it turns out, I already had Microsoft's driver installed on my dev VM, which stuck me as odd since I hadn't installed it.  I discovered that the driver is installed with the BizTalk adapter pack for host systems, which was also installed on my VM.  However, it looks like the version used by the adapter pack is newer than the version provided in the SQL Server feature pack.   Once you get the driver installed, create a connection manager in your package just like you normally would and select the Microsoft OLE DB Provider for DB2 from the list of available drivers. After you select the driver, you'll need to enter in your host name, login credentials and initial catalog. A couple of things to note here.  First, the Initial catalog needs to be the same as your host name.  Not sure why that is, but trust me, it just does.  Second, for credentials, in my environment, we're using what the client's iSeries people refer to as "profiles".  I guess this is similar to SQL auth in the SQL Server world.  In other words, they've given me a username and password for connecting to DB, so I've entered it here. Next, click the Data Links button.  On the Data Links screen, enter your package collection on the first tab. Package collection is one of those DB2 concepts I'm still trying to figure out.  From the little bit I've read, packages are used to control SQL compilation and each DB2 connection needs one.  The package collection, I believe, controls where your package is created.  One of the iSeries folks I've been working with told me that I should always use QGPL for my package collection, as QGPL is "general purpose" and doesn't require any additional authority. Next click the ellipsis next to the Network drop-down.  Here you'll want to enter your host name again. Again, not sure why you need to do this, but trust me, my connection wouldn't work until I entered my hostname here. Finally, go to the Advanced tab, select your DBMS platform and check Process binary as character. My environment is DB2 on the iSeries and iSeries is the replacement for AS/400, so I selected DB2/AS400 for my platform.  Process binary as character was necessary to handle some of the DB2 data types.  I had a few columns that showed all their data as "System.Byte[]".  Checking Process binary as character resolved this. At this point, you should be good to go.  You can go back to the Connection tab on the Data Links dialog to perform a couple of tests to validate your configuration.  The Test Connection button is obvious, this just verifies you can connect to the host using the configuration data you've entered.  The Packages button will attempt to connect to the host and create the packages required to execute queries. This isn't meant to be a comprehensive look SSIS and DB2, these are just some of the notes I've come up with since I've started working with DB2 and SSIS.  I'm sure as I continue developing my packages, I'll find more quirks and will post them here.

    Read the article

  • Adding UCM as a search source in Windows Explorer

    - by kyle.hatlestad
    A customer recently pointed out to me that Windows 7 supports federated search within Windows Explorer. This means you can perform searches to external sources such as Google, Flickr, YouTube, etc right from within Explorer. While we do have the Desktop Integration Suite which offers searching within Explorer, I thought it would be interesting to look into this method which would not require any client software to implement. Basically, federated searching hooks up in Windows Explorer through the OpenSearch protocol. A Search Connector Descriptor file is run and it installs the search provider. The file is a .osdx file which is an OpenSearch Description document. It describes the search provider you are hooking up to along with the URL for the query. If those results can come back as an RSS or ATOM feed, then you're all set. So the first step is to install the RSS Feeds component from the UCM Samples page on OTN. If you're on 11g, I've found the RSS Feeds works just fine on that version too. Next, you want to perform a Quick Search with a particular search term and then copy the RSS link address for that search result. Here is what an example URL might looks like: http://server:16200/cs/idcplg?IdcService=GET_SCS_FEED&feedName=search_results&QueryText=%28+%3cqsch%3eoracle%3c%2fqsch %3e+%29&SortField=dInDate&SortOrder=Desc&ResultCount=20&SearchQueryFormat= Universal&SearchProviders=server& Now you want to create a new text file and start out with this information: <?xml version="1.0" encoding="UTF-8"?><OpenSearchDescription xmlns:ms-ose="http://schemas.microsoft.com/opensearchext/2009/"> <ShortName></ShortName> <Description></Description> <Url type="application/rss+xml" template=""/> <Url type="text/html" template=""/> </OpenSearchDescription> Enter a ShortName and Description. The ShortName will be the value used when displaying the search provider in Explorer. In the template attribute for the first Url element, enter the URL copied previously. You will then need to convert the ampersand symbols to '&' to make them XML compliant. Finally, you'll want to switch out the search term with '{searchTerms}'. For the second Url element, you can do the same thing except you want to copy the UCM search results URL from the page of results. That URL will look something like: http://server:16200/cs/idcplg?IdcService=GET_SEARCH_RESULTS&SortField=dInDate&SortOrder=Desc&ResultCount=20&QueryText=%3Cqsch%3Eoracle%3C%2Fqsch%3E&listTemplateId= &ftx=1&SearchQueryFormat=Universal&TargetedQuickSearchSelection= &MiniSearchText=oracle Again, convert the ampersand symbols and replace the search term with '{searchTerms}'. When complete, save the file with the .osdx extension. The completed file should look like: <?xml version="1.0" encoding="UTF-8"?> <OpenSearchDescription xmlns="http://a9.com/-/spec/opensearch/1.1/" xmlns:ms-ose="http://schemas.microsoft.com/opensearchext/2009/"> <ShortName>Universal Content Management</ShortName> <Description>OpenSearch for UCM via Windows 7 Search Federation.</Description> <Url type="application/rss+xml" template="http://server:16200/cs/idcplg?IdcService=GET_SCS_FEED&amp;feedName=search_results&amp;QueryText=%28+%3Cqsch%3E{searchTerms}%3C%2fqsch%3E+%29&amp;SortField=dInDate&amp;SortOrder=Desc&amp;ResultCount=200&amp;SearchQueryFormat=Universal"/> <Url type="text/html" template="http://server:16200/cs/idcplg?IdcService=GET_SEARCH_RESULTS&amp;SortField=dInDate&amp;SortOrder=Desc&amp;ResultCount=20&amp;QueryText=%3Cqsch%3E{searchTerms}%3C%2Fqsch%3E&amp;listTemplateId=&amp;ftx=1&amp;SearchQueryFormat=Universal&amp;TargetedQuickSearchSelection=&amp;MiniSearchText={searchTerms}"/> </OpenSearchDescription> After you save the file, simply double-click it to create the provider. It will ask if you want to add the search connector to Windows. Click Add and it will add it to the Searches folder in your user folder as well as your Favorites. Now just click on the search icon and in the upper right search box, enter your term. As you are typing, it begins executing searches and the results will come back in Explorer. Now when you double-click on an item, it will try and download the web viewable for viewing. You also have the ability to save the search, just as you would in UCM. And there is a link to Search On Website which will launch your browser and go directly to the search results page there. And with some tweaks to the RSS component, you can make the results a bit more interesting. It supports the Media RSS standard, so you can pass along the thumbnail of the documents in the results. To enable this, edit the rss_resources.htm file in the RSS Feeds component. In the std_rss_feed_begin resource include, add the namespace 'xmlns:media="http://search.yahoo.com/mrss/' to the rss definition: <rss version="2.0" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:sy="http://purl.org/rss/1.0/modules/syndication/" xmlns:media="http://search.yahoo.com/mrss/"> Next, in the rss_channel_item_with_thumb include, below the closing image element, add this element: </images> <media:thumbnail url="<$if strIndexOf(thumbnailUrl, "@t") > 0 or strIndexOf(thumbnailUrl, "@g") > 0 or strIndexOf(thumbnailUrl, "@p") > 0$><$rssHttpHost$><$thumbnailUrl$><$elseif dGif$><$HttpWebRoot$>images/docgifs/<$dGif$><$endif$>" /> <description> This and lots of other tweaks can be done to the RSS component to help extend it for optimum use in Explorer. Hopefully this can get you started. *Note: This post also applies to Universal Records Management (URM).

    Read the article

  • Prevent Changing the Screen Saver and Wallpaper in Windows 7

    - by Mysticgeek
    Sometimes you might not want users to have the ability to change Screen Savers and Wallpaper on Windows 7 workstations. Today we look at how to prevent them from changing either one or both. You might administer computers in your home or small office and find it annoying when users continuously change the wallpaper and Screen Savers to something obnoxious. A lot of times they might be inexperienced users and download these so-called “wonderful and free” Screen Saver/Wallpaper packages from shady sites that include loads of Spyware. Preventing users from changing them is another helpful tool to avoid wasteful time spent switching things back. Prevent Changing Screensavers & Wallpaper Using Group Policy Editor  Note: This method uses Group Policy which is not available in Home versions on Windows 7. Open the Start Menu and enter gpedit.msc into the Search box and hit Enter. When Local Group Policy Editor opens, navigate to User Configuration \ Administrative Templates \ Control Panel \ Personalization. Then in the right column double-click on Prevent changing desktop background. Now check the radio button next to Enabled, then click OK. Back on the Group Policy Screen, double-click on Prevent changing screen saver. In the next screen select the radio button next to Enable, click OK, then close out of Group Policy Editor. Now when a user goes into the Personalization section, the Desktop Background hyperlink is now grayed out and inactive. Notice the message One or more of the settings on this page has been disabled by the system administrator at the bottom of the section. If they click to change the Screen Saver, an error message will pop up letting them know the function is disabled. Prevent Changing Screensavers & Wallpaper Using a Registry Hack You can also make a couple Registry changes to prevent users from changing the Wallpaper & Screen Saver…which will work on Home versions of Windows 7. Before making any Registry changes make sure you back it up first. Open the Registry by typing regedit into the Search box in the Start menu and hit Enter. First we’ll start with the Wallpaper. Navigate to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System and create a new String Value and name it Wallpaper. Then modify the Value data to point to the location of the Wallpaper you want it to always be. Where in this example it’s our main wallpaper on our local drive…then click OK. Now let’s make sure they can’t change the Screen Saver. In the same Registry location, we need to make a new DWORD (32-bit) Value. Give it the Value name of NoDispScrSavPage and the value data of “1” and click OK. Close out of the Registry and restart the machine or simply log off then back on again for the changes to take effect. Results For the Wallpapers, a user can still go in and see the selections, however if they try to change it to something else… It will just go back to the Personalization screen and no changes will be made, as we set the value to only be the background we specified. If the user tries to make a change to the Screen Saver, the hyperlink will be grayed out and inactive, and the message One or more of the settings on this page has been disabled by the system administrator will be displayed at the bottom of the section. Conclusion If you’re tired of users changing the Wallpaper and Screen Saver, and want another way to help avoid Malware, locking down these settings can help a lot. Again, before making any changes to the Registry, make sure to back it up. These settings should work in Vista and XP as well. Similar Articles Productive Geek Tips Save 1-4% More Battery Life With Windows Vista Battery SaverCustomize Your Windows Vista Logon ScreenEnable "Ubuntu Style" Logons in Windows VistaManage the Delete Confirmation Dialog box in Windows 7Dual Monitors: Use a Different Wallpaper on Each Desktop TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott

    Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >