Search Results

Search found 1702 results on 69 pages for 'gyaani guy'.

Page 51/69 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

• Instant connection to wireless network but delayed internet access on Mediacom with Windows 7

  - by David

  I have Mediacom cable internet and their provided modem/wireless router a Cisco DPC3825. Each of the laptops experiencing the trouble have Windows 7 64-bit. When connecting to the wireless network each computer will take a second or two to connect and then toggle from "no internet access" to "internet access" however, no websites are accessible for about five minutes after connecting. After that, there aren't any problems. It happens on all 3 of the laptops I have available and none of them have problems on any other network. It seems like my phone doesn't have the delay issue when it connects. I've power cycled the modem/router along with a DNS flush. I have some of the DNS servers manually set to Google DNS addresses and one just default. I've contacted and had Mediacom support try all its tricks. They changed the SSID and password along with resetting the thing remotely a handful of times. It was installed just this month and seemed to pass the tech's checks upon installation. Nothing in the settings has been changed, but it's been exhibiting this problem from the get go. This guy seems to be having the same problem, but no solution was posted. http://www.dslreports.com/forum/r27372861-IA-Connection-to-Mediacom-wireless-Modem-no-internet- Help greatly appreciated.

  Read the article

• Browser history, by window

  - by Alex

  I use Chrome --but can switch to another browser if the feature I am about to describe is available. Browsing history, AFAIK in Chrome is sorted exclusively chronologically. Very often however, I will be working on a particular task on my laptop and have multiple (read: a lot) of tabs open in a single Chrome window for that task. Before finishing that task, I may need to work on something else --so I will open another window and minimize the other one, and start researching an entirely different issue. Over the course of a day, I may end up with 10-15 windows with many tabs each. This raises two issues: (a) memory usage and (b) quickly switching between the most relevant two or three windows. I solve these two problems like any regular guy probably would --closing windows. I want to be able to reopen specific windows that I have closed, such that the tabs that were open in that window at the time the window was closed will reopen. Ideally, closed windows will be sorted by the time they were closed and identified by the tabs that were open (even more ideally, I would be able to name these windows (contemporaneously or in the history menu)). Now that I describe this, what I am asking is: does any browser offer the ability to "save and close" windows? (This is distinct from an option to auto-restore tabs upon reopening the browser) Thank you.

  Read the article

• Which internet scenario would be better?

  - by JL

  I currently have an 8mbps (down) / 512kbps (up) telephone ADSL solution. I must say the reliability is excellent, and up until now its been the fastest connection I could get because I don't live in a cable zone. The real speed of my connection is around 7mbps, but sometimes I manage to get the full 8mbps. I use my connection for work, so it needs to be at least 99% reliable. Recently I was told by a guy who lives up the road that he has a wireless connection with an external antenna and his speeds are 20mbps / 512kbps - he's also paying about 1/2 of what I pay for my wired telephone connection. My question is, is wireless internet good enough for a power user who uses his connection for work 8 hours a day, including VPNing into servers remotely. Besides this I also enjoy playing the odd network game, not a WoW freak, but sometimes I do pick up the odd MMORPG and at times do indulge in some semi heavy gaming sprees. Will this wireless latency drive me crazy and seem slow in comparison? Will it be reliable enough, I also live in an area that snows heavily in winter. I guess its a question of - should I go wireless or not. I've only had 1 wireless connection before and that was years ago using iBurst technology and I remember it was terrible for VPN, but I guess the technology might have been improved since then? What do you guys think?

  Read the article

• Can't do more than one activity at a time after switching modems

  - by vallorn

  I had to replace the Motorola 2210 DSL modem that I got when I signed up for AT&T DSL Direct a few years ago. The modem kept randomly restarting and it eventually gave out on me. I am assuming overheating was the cause here because it was almost too hot to touch. In any case, I replaced it with a Netgear DM111PSP. It works fine but I can't do more than one activity at a time with it. If my wife is watching Netflix, there is a noticeable delay/latency when trying to view web sites. It's even worse if I try to play an on-line game while she's streaming; the game is basically unplayable. The odd thing is, the only other activity I can do while she's streaming is stream another Netflix show myself. There is no delay when doing that, no buffering either. I'm not a networking guy so maybe there is an explanation for it but I find that kind of odd. I've tried using QoS through my Buffalo N600 wireless router and it doesn't seem to help. With the old Motorola modem, she could be watching Netflix while I play a game and everything worked just fine. Is there anything I can check or reconfigure possibly on the modem that would account for this? Should I just ditch the Netgear and get another modem instead? I have the Netgear modem connected to the Buffalo router in a bridged mode. Its the same exact setup as I had with the Motorola and as far as I can tell, it's not the router that is the cause.

  Read the article

• How to send T.38 from a mac?

  - by Brian Postow

  I'm trying to set up a fax-server on a macintosh. I have Hylafax, and we're going to use an internet FOIP fax provider (Haven't decided who yet, that may be another question). The problem is how to get from Hylafax to T.38. I know of two options, but I'm not sure how to decide between them: T38modem Advantages: It's only one extra program, and i know that I can compile it for the Mac. (well, At least I can get the H323 version working on a Mac) Disadvantages: It is mostly undocumented and seems to be supported only by one guy in Russia. IAXModem/Asterisk Advantages: It's well known, and well supported. We can pay for support. It presumably does the T38 with SIP correctly, so we don't have to worry about it. Disadvantages: It's two separate programs. While I know how to get Asterisk on a mac, I'm not sure about IAXModem. (It's sourceforge, and linux, but compiling things for a mac isn't always straight forward...) It's also mostly undocumented. Do these seem like an accurate listing of the pros/cons? Anyone have any other suggestions? thanks.

  Read the article

• What is the difference between Startup programs in windows and the same programs being started manually

  - by sup

  I am no Windows guy, but I am trying to get a seamless integration of Windows program through Virtual Box Windows guest onto my Ubuntu machine. I more or less followed this tutorial: https://nowhere.dk/articles/running-windows-applications-natively-with-seamlessrdp Basically I start up Windows in Virtual Box and then I try to launch an application (on Ubuntu host) like this: rdesktop -A -s "c:\Program Files\ThinLinc\WTSTools\seamlessrdpshell.exe notepad.exe" 192.168.123.103:3389 -u user -p password That just gives me full Windows desktop that I do not want. However, when I run (on the Windows guest) "c:\Program Files\ThinLinc\WTSTools\seamlessrdpshell.exe" "notepad" The command above works and I get just the window I want. Now, so I thought I would put this command into startup folder of the Windows machine and everything would be fine. But it says "Unable to set up the virtual channel". (by googling, I nailed it to this file: https://sourceforge.net/p/rdesktop/code/1686/tree/seamlessrdp/trunk/ServerExe/vchannel.c - the warning is triggered (by main.c in the same directory) when function vchannel_open() returns something that C interprets as yes for if condition). I have no idea why it works when I launch this command manually via a bat file and not when I put it to startup programs. Any ideas?

  Read the article

• Checkpoint VPN-1 R60 and Windows 7 64 Bit Client

  - by Mohit

  As per my knowledge of checkpoint VPN-1. My company is using checkpoint VPN-1 R 60 ( I guess as I dont know how to check server version) Firewall(VPN Server). Now the problem is that I installed Windows 7 64 bit. But, after my research I found that there are not even one client (SecuRemote/SecuClient) for Win7 64 bit, when Firewall or server is R60. I thought of some open source solutions. Can you guys please suggest me some with the configuration required. As of now, I know the IP of the server. I know my username and password using which I connect and that is not my domain password. that i can confirm to you guys. I am not a network guy. I am more of a developer. But, I need some help in this.So, let me know if I can provide you more details. Please please i need urgent help on this.

  Read the article

• Openldap, groups, admin groups, etc

  - by Juan Diego

  We have a samba server as PDC with OpenLDAP. So far everything is working, even windows 7 can log on to the Domain. Here is the tricky part. We have many departments, each department has it's own IT guys, and these IT guy should be able to create users in their department and change any info of the users in their department. My Idea was to create 2 groups for each department, For example: Department1 and Admins Department1. Admins Deparment1 has "write" priviledges for members of group Department dn: ou=People,dc=mydomain,dc=com,dc=ec objectClass: top objectClass: organizationalUnit ou: People dn: cn=Admins,ou=Group,dc=mydomain,dc=com,dc=ec objectClass: groupOfNames objectClass: top cn: Admins dn: cn=Admins Department1,cn=Admins,ou=Group,dc=mydomain,dc=com,dc=ec objectClass: groupOfNames objectClass: top cn: Admins Department1 member: uid=jdc,ou=People,dc=mydomain,dc=com,dc=ec structuralObjectClass: groupOfNames I dont know if you should make Department1 as part of Domain Users dn: cn=Deparment1,cn=Domain Users,ou=Group,dc=mydomain,dc=com,dc=ec objectClass: groupOfNames objectClass: top cn: Deparment1 member: uid=user1,ou=People,dc=mydomain,dc=com,dc=ec Or just create the deparments like this. dn: cn=Deparment1,ou=Group,dc=mydomain,dc=com,dc=ec objectClass: groupOfNames objectClass: top cn: Deparment1 member: uid=user1,ou=People,dc=mydomain,dc=com,dc=ec I seems that when you use smbldap tools bydefault the users are part of Domain Users even if you dont have them as part of Domain Users in the memberUid attribute, when I use finger they showup as part of the Domain Users group. I dont want the Departments Admins to be Domain Admins because they have power over all the users, unless I am mistaken. I also have trouble with the ACLs. I was trying to create an acl for members of this Admins group, I was trying with this search, but didnt work ldapsearch -x "(&(objectClass=organizationalPerson)(member=cn=Admins Department1,ou=Group,dc=mydomain,dc=com,dc=ec))" I am open to suggestions.

  Read the article

• Getting 2560x1600 out of an ATI Radeon HD 4670 on Windows 7

  - by Alexey

  Greetings, I've got a Dell Studio XPS 1640 laptop (with an ATI Radeon HD 4670 graphics card) running Windows 7, and just bought a Dell 3007HPC 30-inch monitor for it. I'm trying to figure out how to get the full 2560x1600 experience out of this setup. Here's what I've done so far: Plug in using an HDMI cable and an HDMI--D-DVI converter on the monitor side. Open up Screen Resolution. Maximum supported setting is 1920x1080. Tried that (several times) - sometimes it doesn't work at all (blank screen); other times, it only shows the first 1280x800 pixels on the bigger screen. Tried using the Catalyst control center - played with various settings there, couldn't get the screen to show anything interesting. Tried using PowerStrip to set a custom resolution, again, no luck. Spoke to a Dell Preferred Custom Support guy for about an hour before giving up. He remote-accessed my computer, and told me that (1) The maximum supported resolution for XPS 1640 is 1920x1080, and (2) 'it seems to be working from where he sees it, must be a connection issue'. None of this has helped. Does anybody have ideas? Should I be using a different cable set up? Am I using Powerstrip wrong?

  Read the article

• Some Can reach bidmail.com others can't.

  - by user69426

  On a windows 7 Professional machine in Chrome one of our Estimating assistants can't get to www.bidmail.com, however the other 3 can. On his machine I did nslookup then bidmail.com and it fails to find it. I then went to a machine that could reach bidmail and did nslookup. It can't find it. I was skeptical and thought maybe it was a cached page so I cleared the cache then went back to bidmail.com was able to get to the page, login, lookup a newly posted bid then download the file. Yet I can not look it up through nslookup and I can't ping it www.bidmail.com and I can't trace it. I remoted to our other warehouse which is set up as a workgroup and attempt to nslookup bidmail and that nslookup fail... and on that machine which has never been to bidmail before it was able to connect to the website! I am totally confused if I can't ping it and I can't use nslookup to get there how in the hell is Chrome getting to the page and how do I get this guy back on? Also while typing this I took a new laptop out of the box plugged it in with no updates and can get to bidmail! omg!

  Read the article

• Using radvd to advertise ipv6 over VPN connection using DD-wrt

  - by Sean Madden

  My ultimate goal is to allow VPN users to have access to my internal IPv6 network from across the intertubes. I've got a linksys WRT54GSv2 running DD-WRTv24SP1 and have configured the little guy as specified here http://www.dd-wrt.com/wiki/index.php/IPv6 and it works wonderfully over the br0 interface (LAN/WLAN bridge). Here's the issue though, when I add an additional interface to the radvd config file on the router (specifically ppp0, for the VPN traffic), radvd refuses to start. The kicker is that on DDWRT, it doesn't give an error message, it just fails outright. Any suggestions on where to proceed from here? /jffs/radvd.conf: interface br0 { AdvSendAdvert on; prefix 0:0:0:1::/64 { AdvOnLink on; AdvAutonomous on; }; }; interface ppp0 { AdvSendAdvert on; prefix 0:0:0:1::/64 { AdvOnLink on; AdvAutonomous on; }; }; The documentation I've found for radvd is slim, but if anyone has a decent idea on how to proceed I'd love to hear it.

  Read the article

• Monitoring outgoing messages using EXIM

  - by dashmug

  I work as an IT guy in a law firm. I am recently asked to make a system wherein all the outgoing emails coming from our server to our clients will be put on hold first and wait for approval before it gets sent to the client. Our mail server uses Exim (that's what it says in cPanel). I am planning to create filters where the outgoing emails will be forwarded to an editor account. Then, the editor will review and edit the contents of the email. When the editor already approves the email, it will then get sent to the client by the editor but still using the original sender in the "From:" and "Reply-To:" field. I found some pointers from this site = http://www.devco.net/archives/2006/03/24/saving_copies_of_all_email_using_exim.php. Once the filters are in place, I want to make a simple PHP interface for the editor to check the forwarded emails and edit them if necessary. The editor can then click on an "Approve" button that will finally deliver the message using the original sender. I'm also thinking that maybe a PHP-less system will be enough. The editor can receive the emails from his own email client edit them and simply send the email as if he is the original sender. Is my plan feasible? Will there be issues that I have overlooked? Does it have the danger of being treated as spam by the other mailservers since I'll be messing up the headers?

  Read the article

• Swap static public IPs without creating DNS conflicts?

  - by Jakobud

  Our ISP is Comcast and we have 5 static public IPs from them that we use for various services, including customers connecting to our network, VPN, web, DNS, etc... We need more IP addresses from Comcast. Unfortunately, Comcast is telling us that they can't just simply give us 5 more addresses. They only give static IP addresses in blocks of 1, 5 or 13. In order for us to get more static IPs, they have to take away our current 5 static IPs and give us 13 new ones. How do we make this transition without causing all sorts of DNS chaos? We run public DNS servers, so we can make the DNS changes ourselves, but it will take some time obviously for those DNS changes to propagate throughout the internet. Are there any easy ways to make this transition? Like create some type of fallback DNS entry or something? Surely there must be some sort of procedure for this kind of thing. The Comcast support guy was useless.

  Read the article

• Suggestions for accessing SQL Server from internet

  - by Ian Boyd

  i need to be able to access a customer's SQL Server, and ideally their entire LAN, remotely. They have a firewall/router, but the guy responsible for it is unwilling to open ports for SQL Server, and is unable to support PPTP forwarding. The admin did open VNC, on a non-stanrdard port, but since they have a dynamic IP it is difficult to find them all the time. In the past i have created a VPN connection that connects back to our network. But that didn't work so well, since when i need access i have to ask the computer-phobic users to double-click the icon and press Connect i did try creating a scheduled task that attempts to keep the VPN connection back to our office up at all times by running: >rasdial "vpn to me" But after a few months the VPN connection went insane, and thought it was both, and neither, connected an disconnected; and the vpn connection wouldn't work again until the server was rebooted. Can anyone think of a way where i can access the customer's LAN that doesn't involve opening ports on the router needing to know their external IP customer interaction of any kind Blah blah blah use vpn vnc protocol has known weaknesses you are unwise to lower your defenses it's not wise to expose SQL Server directly to the internet you stole that line from Empire Customer doesn't care about any of that. Customer wants things to work.

  Read the article

• Best photo management software?

  - by Niels Basjes

  Hi, What I would like is a single piece of software (or a smart combination of tools) that allow me to manage my photos in a better way than what I've found so far. 1. Tags Primarily I need a way of tagging the images. So I can manually tag photos the same way we tag questions here at SO/SF/SU. I want this software to place a lot of the tags automagically (obvious things like date and resolution). 2. Face recognition What I would really like is that this software has a feature that it can recognize faces in images and places tags with the name of the person. So far I've only heard of one online photo system that can do that (Picasa) and not yet of any offline tool. 3. Version database I must have some way of having a central GIT/SVN/... that contains all images. I have had a harddrive corruption a few years ago and it took me a long time to figure out which images had been damaged. I always want to be able to go back to what the camera produced. 4. Website I want to be able to generate a website (few 'tag' specific websites) based on the actual content. 5. Easy bulk uploading Many photo tools have a one on one uploading option. I prefer simply 'throwing' my images on a file server under Linux (Samba) and let the system automagically integrate, tag, recognize, etc. all images. Ok, I know these are a bit much. Perhaps you guy's have some suggestions about existing tools that can make this possible. Or even a complete system that does this. EDIT: To clarify on the OS. I prefer Linux for any 'server' task and Windows XP for any 'desktop' task. Thanks for all your input. Niels Basjes

  Read the article

• Router recommendation to virtualize 800 IPs

  - by delerious010

  I've recently been looking at getting some new load balancers for our environment as we are expecting to double our client base in the next 12 months. Currently we have 400 public IPS serving 800 clusters ( 2 clusters / IP due to ports ) on Coyote Point Balancers, and distributing connections to 3 web servers serving about 6GBytes outgoing, 2Gbytes in per day. If we double, this would be about 800 IPs, possibly 1600 clusters, and about 6 servers per cluster ( for a total of 9600 so called "real servers" using Barracuda's lingo ). Due to the amount of clusters, most solutions I've looked at ( Coyote, Barracuda, Loadbalancer.org ) seem to be unsure whether they'll be able to handle our planned growth, mostly due to health checks performed on the servers ... which makes total sense when you think of it. So the fine folk at loadbalancer.org recommended that we may be better off offload the 400-800 public IPs, which we require for SSL eCommerce solutions, over to a forward facing router. From that point on, the router could do some mangling to route EXT_IP:443 to INT_IP:INT_PORT which would then allow us to reduce the Load Balancer configuration to 1 or 2 clusters, thus resolving the health check problem. Does this idea make sense to yall ? Or would you have other recommendations to make ? Secondly, what router would you recommend for such an undertaking ? I'd be looking at something that has some form of failover mechanism built in. On a totally unrelated note, I've got to admit that I'm extremely pleased with the responses I got from loadbalancer.org. Their responses to my inquiries were surprisingly helpful ( i.e. I didn't feel as if I was taking to a sales guy trying to push something ). ( No I don't work for them, and sadly nor are they sending me free gear ).

  Read the article

• filesystem compatible with freenas and windows

  - by Daniel

  Hi all, I'm planning on using FreeNAS (was considering openfiler but freenas seems simpler) for my home NAS box running off ESXI. I have managed to get local sata drives to mount in ESXI (http://serverfault.com/questions/216902/esxi-add-datastore-without-partitioning). I've had one of the drives fail on my before and I was able to retrieve most of the data off it using windows tools (I'm not much of a linux guy I know enough to be dangerous!). If I go the freenas route in the event that something goes bad what would be the best file system to use so that I could pop the drive out of the freenas box (vm) and put it in another pc running windows so I could try and run various recovery tools to get the data back. All in all its not a major problem if I lose the data just would be a bit annoying, so I'm not looking for suggestions around backing up etc. I was considering using NTFS that the drives are already formatted as but it appears that while freenas does support NTFS that its a bit buggy and not 100% reliable, anyone know if this is still true? Read that on a forum somewhere.

  Read the article

• How can I write automated tests for iptables?

  - by Phil Frost

  I am configuring a Linux router with iptables. I want to write acceptance tests for the configuration that assert things like: traffic from some guy on the internet is not forwarded, and TCP to port 80 on the webserver in the DMZ from hosts on the corporate LAN is forwarded. An ancient FAQ alludes to a iptables -C option which allows one to ask something like, "given a packet from X, to Y, on port Z, would it be accepted or dropped?" Although the FAQ suggests it works like this, for iptables (but maybe not ipchains as it uses in the examples) the -C option seems to not simulate a test packet running through all the rules, but rather checks for the existence for an exactly matching rule. This has little value as a test. I want to assert that the rules have the desired effect, not just that they exist. I've considered creating yet more test VMs and a virtual network, then probing with tools like nmap for effects. However, I'm avoiding this solution due to the complexity of creating all those additional virtual machines, which is really quite a heavy way to generate some test traffic. It would also be nice to have an automated testing methodology which can also work on a real server in production. How else might I solve this problem? Is there some mechanism I might use to generate or simulate arbitrary traffic, then know if it was (or would be) dropped or accepted by iptables?

  Read the article

• How to access Windows Server 2008 R2 file shares from a different subnet

  - by Lloyd Cotten

  We have a couple of severs that used to be Windows Server 2003 that we recently upgraded to Windows Server 2008 R2. A couple of details to set the situation up: We wiped the OS and re-installed. These servers are on one subnet (172.16.x.x) and we are trying to access some file shares on them from another subnet (10.34.x.x). Firewall is disabled on these servers. Trying to access with UNC "\172.16.x.x\sharename" and net use \172.16.x.x However, we're having problems doing this. We are getting "The network path was not found". Here's some of the things we've tried so far and the result: Tried accessing the share from other (non-2008) servers on the same subnet... Success! Ping servers from different subnet... Success! Telnet connection into port 139 from different subnet... Success! Took a scan through Local Security Policies to see if something obvious needed to be enabled / disabled / configured... Fail I'm not sure where to look next. I know that the router between the two subnets is locked down pretty good, but this did work for our 2003 servers. Has anything changed in the way of ports used for UNC / file share access in 2008? Maybe I'm missing some security policy setting? Hoping somebody can take pity on a poor programming guy that can't figure out something really simple. :-) Thanks!

  Read the article

• My New Dell Workstation T-7500 gives electric shock

  - by Dan

  Just bought Dell T-7500 Workstation. When installation technician came to Install the workstation, he got an electric shock when he touched the Start Button. He also got shock when he touched Front Panel. No shock when touching rest of the Chassis. He called Dell Support & tried to troubleshoot by taking out various wires etc but did not help. I touched the same places & I also got shock. We checked everything possible including connecting to various outlets but it didn't solve the problem. Installation subcontractor said that they are not supposed to troubleshoot anything on new system, just install it & they made notes & left. I called my sales guy & it was weekend so he said he will take care of it on Monday. Here are my concerns : (1) Why does that happen ? Although it is a mild shock & it won't kill you but might damage other parts of workstation ? (2) Is this common for workstations ? (3) What should I do ? Of course Dell will try to troubleshoot again but should I let them do that OR ask for a New System ? (4) Wheat would happen if I continue using it till the new system arrives ? Thank You.

  Read the article

• SQL Server 2008 Bring Database Online trying to open a file from a drive that doesn't exist

  - by Nai

  This is my error I am facing TITLE: Microsoft.SqlServer.Smo Set offline failed for Database 'Go3D_Retailer ------------------------------ ADDITIONAL INFORMATION: An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) Unable to open the physical file "E:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\ftrow_Go3D_catalog.ndf". Operating system error 2: "2(failed to retrieve text for this error. Reason: 15105)". Database 'Go3D_Retailer' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. ALTER DATABASE statement failed. (Microsoft SQL Server, Error: 5120) Background to this error I've been trying to move my destination logshipping database to another physical server for analysis purposes. Because I do not have domain keys and active directory set up, I had to hack my process by using the same username/password for both the source and destination servers to get the process to work. Following that, I used this guy's solution to move the destination database to another server. However, this error occurs when I try to bring the database back online. I don't have an E drive on my server and I have no idea why it's trying to open a file from E drive. I have over a 100gb left on my hard disk so it's definitely not a space issue. This sounds like a bug... Any ideas?

  Read the article

• Can't access certain web sites - reset router, any ideas?

  - by IniTech

  EDIT: This problem was resolved by my ISP - had to do with damaged fiber in one of their locations. Thanks to everyone that helped. Not sure if this is the right site (I'm a StackOverflow user) so I thought I'd give it a shot. I'm having trouble connecting to certain sites on any of the 3 machines that are on my LAN. The following sites are returning "Problem Loading Page - The connection has timed out" Sourceforge.net CNet.com Microsoft.com OpenDNS.com even my company's webiste I was worried about possible malware/virus, but I don't think that is the case (given the inability to access my company's site and the fact that all 3 machines are having the same issues.) I've tried with IE8, FF, and Chrome I have reset my router (WRT54G) and my machine(s) multiple times. EDIT: It is also worth noting that this page spins constantly and no avatars show up (I'm assuming it is trying to access gravatar.com with no success.) EDIT: I have the same issues directly connected to the modem. So, any router config is probably not the issue I'm a programmer, not a network guy - any ideas?

  Read the article

• Website Use Monitoring for 3 People

  - by linkedlinked

  I work in an IT startup with 2 partners, and I'm the programmer/IT guy -- in other words, the work horse. To make a long story short, I'm doing most of the work right now, while they spend all day on Facebook. That's OK, because they're paying my salary, but if the project fails, I'm sure they'll blame me for it (I'm doing my best to make sure that doesn't happen!), and I want some sort of recourse. I already have an app that blocks time-wasters on my local PC, and keeps logs of when the app is enabled (so I can say "I had Facebook blocked from 9am-5pm today.") Is there any way I can get a brief summary of the most heavily visited sites, split up by client PC? At the end of the month, I want to be able to say "You both load Facebook, on average, every 10 minutes. You spend hours a day on Youtube, and haven't opened up our bugtracker in weeks" and maybe have a nifty chart or graph to match it. We have a crappy D-Link router, and no IT budget. They are both on Windows Vista, I run Ubuntu Linux. I don't want to install any monitoring software on their PC, but I'm totally fine with, say, routing all the network traffic through my machine. I guess I can think of lots of ways to accomplish this (telnet into JSSH and list open tabs? log all the DNS requests, per-domain? even thinking of setting up a webcam on my desk and just keeping 5-minute snapshots...), I just don't really know where to start. Any advice is appreciated, thanks!

  Read the article

• 2 servers on 2 networks in same office

  - by irot

  Hello Gents, My office doesn't have a "server guy" in employ, so I'm stuck with having to fix server issues for now. There are 2 servers in our office, both are file/web servers only accessible via LAN. They are currently on the same network, so no issue there. Problem is, we recently got a static IP to use, but it's with a different ISP, so now we have 2 routers in our office. I would like to open one of the servers to the public as a web/FTP server. But if I hook a server up to the new router, users will no longer be able to access the files shared on that server (because they're on different networks). How can I go about making one server accessible to the public using the static IP line, but still able to share the files on it to the users connected to the other network? The server I want to make public is running Windows Server 2008, the other server Windows Server 2003. And as far as I know, IP addresses are assigned by the router. I'm just a developer, don't know much about networking. Thank you in advance.

  Read the article

• IIS serving pages extremely slowly

  - by mos

  TL;DR: IIS 7 on WS2008R2 serves pages really slowly; everyone assumes it's because it's IIS and we should have gone with an Apache solution on Linux. I have no idea where to start debugging the problem. I work in a nearly all-MS shop with a bunch of fellow programmers who think Linux is the One True Way. Management recently added a Windows machine with IIS to serve Target Process (third-party agile system), but the site runs extremely slowly. Everyone, to a man, assumes it's because it's on IIS, and if only management would grow a brain and get some Linux servers in here, we could really start cleaning things up! ...Right. Everyone "knows" IIS isn't fit to serve .txt files. ...Well, as the only non-Microsoft hater in the bunch, I am apparently the only one who thinks maybe the Linux guy who hated being told to set up the IIS server may have screwed things up. I'd like to go fix it, but I don't have any clue as to where to start as I am not a sys admin. Help?

  Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >