Search Results

Search found 8410 results on 337 pages for 'hardware reserved'.

Page 51/337 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

• What will happen with my RAID5 after motherboard change?

  - by abatishchev

  Currently I have ASUS P5Q-EM and 3 HDD in RAID5 using it's on-board RAID controller Intel ICH10R. I want to bye a new motherboard, for example, Gigabyte GA-EQ45M-S2 which also have on-board RAID controller, but Intel ICH10DO. What will happen with my data on RAID5? Will I have to re-create the array from the scratch and lost all my data? Is such array a soft RAID or soft-hard? What if my current motherboard will broken? What will happen with my data?

  Read the article

• Asus V1S/V1V inverter cable

  - by Bill

  I have an Asus V1V, which is the same as the Asus V1S except for the video card. I have a problem where the screen will randomly lose brightness or flicker between being lit and not lit. The picture below is of the left hinge, with the cover removed. Pressing one of these cables affects this behaviour, and pressing it in place will resolve the issue for a few hours. To me this means the inverter cable is damaged. As the picture shows, there are two cables, an LCD cable and what I assume is an inverter cable. I purchased an LCD cable for my model of laptop, but have been unable to find an inverter cable. It seems not to exist. I would like some input on if an inverter cable actually exists, if it is likely the problem, or solutions in general to resolve this problem permanently.

  Read the article

• Why DELL PowerConnect and Juniper are so rare ? Why do enterprises stick with Cisco ?

  - by Kedare

  Hello ! I have a little question, I'm actually studing IT in France, and when looking on alternative on the very [...] very expensive Cisco equipments, I've found Juniper and DELL PowerConnect pretty attractive on features and price, but I rarely see something else than the classics Cisco/LinkSys, HP Procurve and Netgear.. Why it's so rare to find those switch ? They looks really great but... I've never seen any Juniper or Powerconnect... Why do enterprises stick with the expensive Cisco ? I've tried to find how to buy both, it's quite easy with PowerConnect, everything is on the DELL website, but it looks it's very hard to find Juniper equipments in France :( Thank you !

  Read the article

• Server 2008 Hard Faults

  - by claw

  Hey all, plase bear with me as I haven't looked at a server in a very long time. The problem I am having is with a Windows 2008 Standard FE Service Pack 2 Intel Xeon X3430 @ 2.40 2.39 GHZ 4 GB Memory 64 Bit There seems to be no problems other than the physical memory peaking at 91%, always with over 100 Hard Faults Per Second. To my understanding hard faults should be fairly rare on a machine with. Are there any logs I can show you? Or investigate myself. The general performance of the machine is ok, i can access SBS2008 and change settings fairly smoothly without hangs etc. However, we connect to the server and do quite a bit of SQL via an application. For a record to retrieve say 20 rows, it can take 20+ seconds. Thanks in advance, Jamie EDIT: What the server is used for: IIS ASP Web Service SQL 2008 List item Exchange unable to upload screenshots due to low reputation - why doesnt my SO work here :)

  Read the article

• What do you upgrade to make games load faster? [on hold]

  - by Superbest

  Let's say you have a relatively modern game like Shogun 2. The loading screens take several minutes. This bothers you and you'd like to improve it. What is actually going on when loading screens are up? I'm guessing assets are being loaded into memory from disk, and possibly being decompressed first. However, what is actually causing the slow down? The memory? Mainboard? CPU? HDD? If you had $100 to spend on upgrades and your only goal is to speed up loading screens without reducing other performance, what component of the computer does it make sense to upgrade for maximum benefit? If your answer is "it depends on the existing setup", what sort of benchmarks would you run to determine what is causing the bottleneck? What if you had $500 instead? I give the two budgets for context. I am not asking for actual recommendations about which component to buy (nor are the numbers supposed to be rigid limits), but what features are important when shopping for components with small and large budgets (a large budget could allow buying multiple components which are not so good on their own, but work particularly well together). I mention Shogun 2 as an example, but I'm asking about reducing overall loading times, across all games, not just one game. Therefore, "put it on a solid state disk" probably won't be good solution, because putting every game on your SDD will quickly fill it up.

  Read the article

• How to use the 4-in-1 card reader on my Lenovo x100e?

  - by Thomas Padron-McCarthy

  My Lenovo x100e laptop has a "4-in-1" card reader that's supposed to handle SD/SDHC, MMC, Memory Stick and MS Pro, but I can't insert my SDHC card (a "SANDISK SECURE DIGITAL EXTREME SDHC 16GB 30MB/S"). It enters a bit and looks lite it will fit, but then it doesn't get any further in (and yes, I've tried to turn it around). It really doesn't move, and I'm afraid to break something if I push harder. Am I missing something obvious here?

  Read the article

• Is it possible to stop the "Beep" device on all computers in a Windows network?

  - by sharptooth

  On Windows the default behavior it to make an annoying "beep" sound every time Windows things something notable happened. The result is that when someone send a company-wide email via the MS Exchange all computers around my cubicle beep one by one. This is annoying and makes no sense. Luckily beeping can be shut off. Someone has to: open the "Device Manager", select "View - Show hidden devices", find the "Beep" device in "Non-Pug and Play Devices" node, open its properties, go to the "Driver" tab, set "startup type" to "Disabled" and click "Stop". The "Beep" device will stop and no longer produce the useless sound. This solution however requires tracking every computer and then talking to its user which is not very convenient. Device Manager doesn't allow stopping a device on another computer. I'm looking for a solution that can be deployed by the administrators team. We have a domain and the administrators even install the programs company-wide automatically. Are there any means to stop the "Beep" device an all computers in the Windows network with some remote-administration features automatically?

  Read the article

• "Mass sotorage controller" and "PCI simple communications controller" devices.

  - by Ehsan Mamakani

  I don't know what exactly these two devices do in computer.and What happens if the drivers for these two devices are not installed?

  Read the article

• Compaq Presario CQ40 unexpected turn off

  - by CRoshanLG

  My Compaq Presario CQ40 (yeah, its pretty old) suddenly turns off after about 1/2 - 1 hour usage without any notice or warning. The power cable and adapter works fine (indicator bulbs show that power is given to the laptop), but it seems like machine suddenly plugged off from the power source. And when I try to switch it on, after the sudden turn off it simply won't turn on. I can only turn it on after letting it to rest for at least couple of hours! ** The battery has been dead for some time now, but it has been working fine on direct power supply until recently. Has anyone encountered this? and hopefully knows any cure?

  Read the article

• 4 GB DDR2 vs 2 GB DDR 3...........

  - by metal gear solid

  I 'm going to purchase new PC. due to my budget limit either i can purchase 2 x 2GB = 4GB DDR 2 or 2 GB Single stick DDR 3. Will 2 GB DDR 3 will give almost same performane compare to 4 GB DDR 2? In future I will upgrade RAM upto 8 GB Which option would be better for me for now and why?

  Read the article

• Can we add more RAM sockets on a motherboard?

  - by Vicheanak

  If a motherboard has only 4 RAM sockets, then can we add more up to 5 or 6 sockets?

  Read the article

• Mouse for a lefty?

  - by Kyralessa

  As a programmer, I'm fairly particular about my keyboard and mouse. One thing I've only recently noticed is that the mice I tend to prefer don't work well for my five-year-old. He's left-handed, but ends up mousing with his right hand on the computer because (a) that's where the mouse is, and (b) most mice are designed for right-handed people anyway. So, a couple of questions: If you're left-handed and you mouse with your left hand, do you have any recommendations on good mice? If you have a lefty in your household (whether or not it's you), is there an easy way to swap settings between left-handed and right-handed mouse buttons? One way is Control Panel Mouse Check the box on the first tab OK. Do you know of anything faster? Or, better yet, what I'd really like is a way to reverse those settings on only one particular mouse, which would be designated as my son's mouse.

  Read the article

• (Arch)Linux board with dual ethernet

  - by tekknolagi

  I am looking for a Linux board with the following requirements: 2 ethernet ports (helpful, but only 1 required) 2 USB ports SDXC support (for SD/MicroSD) WiFi (25 concurrent users ideally) HDMI or micro HDMI out I don't know of a good way to find boards. I went through and catalogued a bunch in a spreadsheet, though: https://docs.google.com/spreadsheets/d/1ZyWvg1u5jAeCq4ghpQv3fukl78nYO64utfQgzTP1r7w/edit?usp=sharing

  Read the article

• How to unlock and remove a protected partition from Prestigio USB stick?

  - by mr.b

  Ok, so, I have one of those fancy schmancy devices, which is given to me by a frustrated friend of mine. Device is a Prestigio Leather 8GB, which identifies itself to Linux host as: Bus 001 Device 006: ID 1307:0165 Transcend Information, Inc. 2GB/4GB Flash Drive Kernel messages as USB device is plugged in: kernel: [ 2769.580042] usb 1-9: new high speed USB device using ehci_hcd and address 7 kernel: [ 2769.714782] scsi8 : usb-storage 1-9:1.0 kernel: [ 2770.713937] scsi 8:0:0:0: Direct-Access 8192MB flash drive 1.00 PQ: 0 ANSI: 2 kernel: [ 2770.714535] scsi 8:0:0:1: Direct-Access 8192MB flash drive 1.00 PQ: 0 ANSI: 2 kernel: [ 2770.715734] sd 8:0:0:0: Attached scsi generic sg3 type 0 kernel: [ 2770.716108] sd 8:0:0:1: Attached scsi generic sg4 type 0 kernel: [ 2770.722175] sd 8:0:0:0: [sdc] 962560 512-byte logical blocks: (492 MB/470 MiB) kernel: [ 2770.722657] sd 8:0:0:0: [sdc] Write Protect is on kernel: [ 2770.731078] sd 8:0:0:1: [sdd] 14012416 512-byte logical blocks: (7.17 GB/6.68 GiB) kernel: [ 2770.731215] sdc: kernel: [ 2770.738251] sd 8:0:0:1: [sdd] Write Protect is off kernel: [ 2770.880328] kernel: [ 2770.885876] sd 8:0:0:0: [sdc] Attached SCSI removable disk kernel: [ 2770.887442] sdd: unknown partition table kernel: [ 2771.049605] sd 8:0:0:1: [sdd] Attached SCSI removable disk So, symptoms are typical for U3-like devices: two separate devices inside of a single flash device. Windows sees it also as two identical usb devices, and mounts two separate drives to system, whereas first one presents itself as a CDROM device, holding a write-protected content, and second is a regular flash-disk partition, that "can" be written to. However, it seems like it's broken in some weird way, since it won't let me write anything to it, format it, nothing, but that's not the issue right now. Question: How can I unlock entire USB stick so it appears to system as a single, 8GB device which can be partitioned and used normally, without restrictions? Since it appeared to be an U3 device, I have tried standard utilities: both U3 Uninstaller by u3.com (found on SoftPedia), and opensource u3_tool from sourceforge (on both Windows and Linux). First utility failed to even detect USB stick as U3 device (simply stood idle while I re-plugged stick several times), while second tool failed with some obscure error about SCSI command unable to do something (I might be able to provide exact errors when I switch back to windows). u3_tool -i /dev/sg3 (Display device info) fails with u3_partition_info() failed: Device reported command failed: status 1 ...and every other option fails with same error, minus first part which states which command precisely has failed. So, apparently, this isn't a U3 device. Or, if it is, it doesn't behave like one. I read on a few occasions that this device protection is done by special command sent to device which tells it to lock itself, and so there should be an unlock command, that would set drive straight. Does anyone have any idea about what could I do to this device to fix it? P.S. I also mentioned a problem with being unable to use second "drive", but I'll tackle that problem when (and if) I manage to merge those two devices into one...

  Read the article

• Is surge protection actually needed?

  - by andrew

  Am I am an idiot for not using a surge protected powerboard? Does this mean my computer gets fried in a power outage? Which particular parts of the computer are most vulnerable to damage if I get a 'surge'? Sorry for being a newb.

  Read the article

• Windows detected a hard disk failure* - what should I do?

  - by bart

  I'm using Windows 7 x64 Ultimate, I'm getting windows error popups like this one for about 3 days, multiple times a day: This Samsung SpinPoint F3 HD502HJ 500 GB is about 2 years old and I already checked it with Samsung ES Tool 3.0, did all the scans (took hours) and everything is fine! I have no malware, viruses and this started to happen after I have had some electrcity issues at my house (multiple power surges / overvolatege during the night, PC was connected, but turned off), any ideas? What other test should I perform? I believe the disk could be damaged, but then diagnostic tools should prove this, right? *in fact "Windows detected hard disk problem" but I was unable to put word "problem" within the title as well.

  Read the article

• NVidia Graphic Card troubleshooting

  - by Berry Langerak

  My dad has a HP pavilion laptop, which is over 6 years old. It contains an onboard graphic card, a NVidia GeForce 8400M GS. Since a week or two, he's getting BSOD in Windows Vista. Also, the screen was acting up; strange lines and figures keep creeping up, but only once in a while -- not always. Thinking that it might be the drivers he had recently upgraded, I decided to downgrade the driver, with no luck at all. I then continued to deinstall the driver, and reinstalling the current stable version, but alas, to no prevail. Windows kept crashing during the course of the last two weeks, and thinking it might be Windows breaking up, I decided to upgrade his Vista installation to Windows 7, as I've been hearing good things about it. Alas, even that didn't help, and it seems the strange lines and figures keep popping up. I've opened the laptop itself, thinking it might simply be overheating because of clogging in the vents, but that's not the case, it's clean as a whistle. Now for the actual question; does anyone have a decent flowchart on how to troubleshoot such issues? It might well be the videocard itself, as the strange lines and figures sometimes even appear during BIOS and POST, but I'm not sure.

  Read the article

• Should I buy matching hard drives for a NAS RAID 1 array?

  - by Jamie Ide

  I'm planning to buy a NAS (network attached storage) box and I've picked the Synology DS209. I want to set up a RAID 1 array and I'm wondering if I should buy a matching pair of hard drives or if it would be better to buy from different manufacturers. I'm concerned that a matching pair would be more likely to fail at the same time.

  Read the article

• Ubuntu: On-screen keyboard

  - by Paul Lammertsma

  On a similar note to this question, I recently booted Ubuntu to recover a Windows partition, but couldn't in any way get the keyboard to register. I recall back in 8.x that you could easily reach the on-screen keyboard (Virtual Keyboard?) via "Assistive Technologies". It seems to have disappeared since 9.x. For future reference, how can I easily get to it? Recall that in this scenario I won't have a keyboard to enter terminal commands (e.g. to install xkbd or something of the like).

  Read the article

• Does a laptop with a GPU also use IGP?

  - by blee

  I have a Thinkpad T60 with dual screen setup: The laptop's LCD: Is normal looking. VGA external monitor: Looks "wavy," but I hooked it up to another computer and it looked fine. Does this imply my GPU is connected to the VGA-out and the built-in LCD is driven by IGP? Is this typically how a laptop with one GPU works? Thanks.

  Read the article

• shredding a particular drive in my PC???

  - by bala3569

  Hi, I want to shred a particular drive in my PC and i dont want to recover any files from that drive...Is it possible??If so den which tool(best shredding tool) is best on its own??

  Read the article

• XP Restart After Power Failure

  - by Jim

  Hello, I've almost got my power settings sorted and was hoping someone could help? If I'm running XP and the power is cut, when the power is restored my machine auto restarts (this is what I want!) However, if I shutdown my machine properly (from the start menu & without touching the PC power button!), then switch the power off at the socket, then switch the power back on, the PC does not automatically restart. It's like the bios(?) recieives a message saying "aha, genuine shutdown and not a power cut, therefore do not restart on power restore." I want my PC to restart everytime it sees power restored from the socket? Any way round this? Anyone seen this before? I've upgraded my bios. Thanks in advance, Jim

  Read the article

• Upgrade the Graphics Card for a Dell Dimension 3100

  - by Pat Foran

  Hi, I have a Dell Dimension 3100 Desktop with a 128MB Graphics Card Integrated into the Mother Board. I need to upgrade this 128MB to at least 256MB or 512MB if the system will support same. I am told by Dell that all I have is a PCIx1 slot and that they do not stock a Graphics Card for this. I was told to shop around at Amazon and ebay etc and I would find one there. I have shopped around for some time now and do not know exactly what I am looking for. There are several PCI Graphics Card out there but which one would be the correct one for a Dell Dimension 3100. Can you help me resolve this problem. If you know of a PCIx1 card that will sort out my problem you might please let me have all the details for to purchase it. Regards, Pat,

  Read the article

• Why does a hard disk suddenly look to Windows as if it "needs to be formatted"?

  - by pufferfish

  This is more of a theory question, but what are the reason(s) for a disk to suddenly cause Windows to start saying it "needs to be formatted"? It happens to an IDE disk that I have in a cheap external enclosure, and I can usually get most of the data back by using software like recuva. It's now happened to an internal disk I have. I'm not looking for software to fix this (although links would be appreciated), but rather a low-level explanation as to what gets corrupted on the disk.

  Read the article

• How can I find a laptop if it has a different name all over the world?

  - by Mike

  CONUNDRUM: A laptop review in the UK talks about how brilliant the "ASUS ABCDE 55" is, but in America, France, etc there is no such laptop name. In fact it's called "ASUS 12345 AB" - AAARRGH! QUESTION: Is there a way of finding out all the diverse names for the same laptop all over the world? Example: if Samsung create a R2D2500, then what is that spec laptop called in all the other countries (if they release it of course). Or if it's not released, what is their similar spec laptop called in the other countries? I understand that specs may be different, but if I read a review on my trusted UK website, but live in say Australia, I want to be able to find the name of the same laptop in Australia and then check out local places to buy it. So if anyone knows if there is a technique, specific website, or even how to use a company website to find out these annoying name changes I'd really appreciate it.

  Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >