Search Results

Search found 1693 results on 68 pages for 'hostname'.

Page 51/68 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

• ProCurve network expansion

  - by Blue Warrior NFB

  I've hit a bit of a wall with our network scale-out. As it stands right now: We have five ProCurve 2910al switches connected as above, but with 10GbE connections (two CX4, two fiber). This fully populates the central switch above, there will be no more 10GbE Ethernet connections from that device. This group of switches is not stacked (no stack directive). Sometime in the next two or three months I'll need to add a sixth, and I'm not sure how deep of a hole I'm in. Ideally I'd replace the core switch with something more capable and has more 10GbE ports. However, that's a major outage and that requires special scheduling. The two edge switches connected via fiber have dual-port 10GbE cards in them, so I could physically put another switch on the far end of one of those. I don't know how much of a good or bad idea that would be though. Is that too many segments between end-points? Some config-excerpts: Running configuration: ; J9147A Configuration Editor; Created on release #W.14.49 hostname "REDACTED-SW01" time timezone 120 module 1 type J9147A module 2 type J9008A module 3 type J9149A no stack trunk B1 Trk3 Trunk trunk B2 Trk4 Trunk trunk A1 Trk11 Trunk trunk A2 Trk12 Trunk vlan 15 name "VM-MGMT" untagged Trk2,Trk5,Trk7 ip helper-address 10.1.10.4 ip address 10.1.11.1 255.255.255.0 tagged 37-40,Trk3-Trk4,Trk11-Trk12 jumbo ip proxy-arp exit

  Read the article

• Weird .#filename files on remote ssh-connected systems after mcedit

  - by etranger

  I'm using MacFusion sshfs in combination with Midnight Commander, and when I edit remote text files with mcedit, weird symlinks are created on the remote system. $ ls -l .* lrwxr-xr-x 1 user group 34 Jun 27 01:54 .#filename.txt -> [email protected] where etranger is my local login name, and mbp is a hostname of my notebook running MacOS. symlinks can be removed by running remote rm command, but cannot be deleted on the mac-fuse mounted volume and thus pollutes the filesystem. I cannot figure what part of software is responsible for this, and how I could fix this, any help is appreciated. EDIT: This appears to be mcedit behavior as documented here: https://dev.openwrt.org/ticket/8245 Apparently, sshfs fails to remove symlink to the lock file for some reason (".#" in filename, perhaps), and it pollutes the filesystem. A quick workaround is possible, using another bug of Midnight Commander: editing (F4) the broken symlink effectively converts it to a missing lock file it was supposed to point to, and removes the symlink itself. The newly created file may then be deleted normally. EDIT 2: Unchecking "Follow symlink" in MacFusion apparently allows sshfs to remove dead symlinks, so the problem disappears completely.

  Read the article

• How to add commands of windows to local shell of XShell 4

  - by dylanninin

  XShell is a very powerful tools to ssh remote computers such as Unix/Linux. And it has built some internal commands for you to run within your Windows. Xshell:\> help Internal Commands: new: Creates a new session. open: Opens a session or the session dialog box. edit: Opens the Session Property dialog box for a session. list: Lists information of all available sessions. 'ls' and 'dir' do the same. cd: Changes the current working directory. clear: Clears the screen/address/command history. help: Displays this help. '?' does the same. quit: Quits Local Shell. 'exit' does the same. ssh: Connects to a host using the SSH protocol. telnet: Connects to a host using the TELNET protocol. rlogin: Connects to a host using the RLOGIN protocol. sftp: Connects to a host to transfer files securely. ftp: Connects to a host to transfer files. External Commands: ipconfig: Configures TCP/IP network interfaces. ping: Sends ICMP ECHO_REQUEST packets to network hosts. tracert: Prints the route packets take to network host. netstat: Displays current protocol statistics and current TCP/IP network connections. nslookup: Resolves a hostname to IP address. For more information, type 'help command' for each command. ex) help telnet But these commands are limited, so how to add commands of windows to local shell of XShell 4

  Read the article

• Cisco ASA: How to route PPPoE-assigned subnet?

  - by Martijn Heemels

  We've just received a fiber uplink, and I'm trying to configure our Cisco ASA 5505 to properly use it. The provider requires us to connect via PPPoE, and I managed to configure the ASA as a PPPoE client and establish a connection. The ASA is assigned an IP address by PPPoE, and I can ping out from the ASA to the internet, but I should have access to an entire /28 subnet. I can't figure out how to get that subnet configured on the ASA, so that I can route or NAT the available public addresses to various internal hosts. My assigned range is: 188.xx.xx.176/28 The address I get via PPPoE is 188.xx.xx.177/32, which according to our provider is our Default Gateway address. They claim the subnet is correctly routed to us on their side. How does the ASA know which range it is responsible for on the Fiber interface? How do I use the addresses from my range? To clarify my config; The ASA is currently configured to default-route to our ADSL uplink on port Ethernet0/0 (interface vlan2, nicknamed Outside). The fiber is connected to port Ethernet0/2 (interface vlan50, nicknamed Fiber) so I can configure and test it before making it the default route. Once I'm clear on how to set it all up, I'll fully replace the Outside interface with Fiber. My config (rather long): : Saved : ASA Version 8.3(2)4 ! hostname gw domain-name example.com enable password ****** encrypted passwd ****** encrypted names name 10.10.1.0 Inside-dhcp-network description Desktops and clients that receive their IP via DHCP name 10.10.0.208 svn.example.com description Subversion server name 10.10.0.205 marvin.example.com description LAMP development server name 10.10.0.206 dns.example.com description DNS, DHCP, NTP ! interface Vlan2 description Old ADSL WAN connection nameif outside security-level 0 ip address 192.168.1.2 255.255.255.252 ! interface Vlan10 description LAN vlan 10 Regular LAN traffic nameif inside security-level 100 ip address 10.10.0.254 255.255.0.0 ! interface Vlan11 description LAN vlan 11 Lab/test traffic nameif lab security-level 90 ip address 10.11.0.254 255.255.0.0 ! interface Vlan20 description LAN vlan 20 ISCSI traffic nameif iscsi security-level 100 ip address 10.20.0.254 255.255.0.0 ! interface Vlan30 description LAN vlan 30 DMZ traffic nameif dmz security-level 50 ip address 10.30.0.254 255.255.0.0 ! interface Vlan40 description LAN vlan 40 Guests access to the internet nameif guests security-level 50 ip address 10.40.0.254 255.255.0.0 ! interface Vlan50 description New WAN Corporate Internet over fiber nameif fiber security-level 0 pppoe client vpdn group KPN ip address pppoe ! interface Ethernet0/0 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/1 switchport trunk allowed vlan 10,11,30,40 switchport trunk native vlan 10 switchport mode trunk ! interface Ethernet0/2 switchport access vlan 50 speed 100 duplex full ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 switchport access vlan 20 ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! boot system disk0:/asa832-4-k8.bin ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server dns.example.com domain-name example.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-net subnet 10.10.0.0 255.255.0.0 object network svn.example.com host 10.10.0.208 object network marvin.example.com host 10.10.0.205 object network lab-net subnet 10.11.0.0 255.255.0.0 object network dmz-net subnet 10.30.0.0 255.255.0.0 object network guests-net subnet 10.40.0.0 255.255.0.0 object network dhcp-subnet subnet 10.10.1.0 255.255.255.0 description DHCP assigned addresses on Vlan 10 object network Inside-vpnpool description Pool of assignable addresses for VPN clients object network vpn-subnet subnet 10.10.3.0 255.255.255.0 description Address pool assignable to VPN clients object network dns.example.com host 10.10.0.206 description DNS, DHCP, NTP object-group service iscsi tcp description iscsi storage traffic port-object eq 3260 access-list outside_access_in remark Allow access from outside to HTTP on svn. access-list outside_access_in extended permit tcp any object svn.example.com eq www access-list Insiders!_splitTunnelAcl standard permit 10.10.0.0 255.255.0.0 access-list iscsi_access_in remark Prevent disruption of iscsi traffic from outside the iscsi vlan. access-list iscsi_access_in extended deny tcp any interface iscsi object-group iscsi log warnings ! snmp-map DenyV1 deny version 1 ! pager lines 24 logging enable logging timestamp logging asdm-buffer-size 512 logging monitor warnings logging buffered warnings logging history critical logging asdm errors logging flash-bufferwrap logging flash-minimum-free 4000 logging flash-maximum-allocation 2000 mtu outside 1500 mtu inside 1500 mtu lab 1500 mtu iscsi 9000 mtu dmz 1500 mtu guests 1500 mtu fiber 1492 ip local pool DHCP_VPN 10.10.3.1-10.10.3.20 mask 255.255.0.0 ip verify reverse-path interface outside no failover icmp unreachable rate-limit 10 burst-size 5 asdm image disk0:/asdm-635.bin asdm history enable arp timeout 14400 nat (inside,outside) source static any any destination static vpn-subnet vpn-subnet ! object network inside-net nat (inside,outside) dynamic interface object network svn.example.com nat (inside,outside) static interface service tcp www www object network lab-net nat (lab,outside) dynamic interface object network dmz-net nat (dmz,outside) dynamic interface object network guests-net nat (guests,outside) dynamic interface access-group outside_access_in in interface outside access-group iscsi_access_in in interface iscsi route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server SBS2003 protocol radius aaa-server SBS2003 (inside) host 10.10.0.204 timeout 5 key ***** aaa authentication enable console SBS2003 LOCAL aaa authentication ssh console SBS2003 LOCAL aaa authentication telnet console SBS2003 LOCAL http server enable http 10.10.0.0 255.255.0.0 inside snmp-server host inside 10.10.0.207 community ***** version 2c snmp-server location Server room snmp-server contact [email protected] snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart snmp-server enable traps syslog crypto ipsec transform-set TRANS_ESP_AES-256_SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set TRANS_ESP_AES-256_SHA mode transport crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group5 crypto dynamic-map outside_dyn_map 20 set transform-set TRANS_ESP_AES-256_SHA crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 10.10.0.0 255.255.0.0 inside telnet timeout 5 ssh scopy enable ssh 10.10.0.0 255.255.0.0 inside ssh timeout 5 ssh version 2 console timeout 30 management-access inside vpdn group KPN request dialout pppoe vpdn group KPN localname INSIDERS vpdn group KPN ppp authentication pap vpdn username INSIDERS password ***** store-local dhcpd address 10.40.1.0-10.40.1.100 guests dhcpd dns 8.8.8.8 8.8.4.4 interface guests dhcpd update dns interface guests dhcpd enable guests ! threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host number-of-rate 2 threat-detection statistics port number-of-rate 3 threat-detection statistics protocol number-of-rate 3 threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server dns.example.com source inside prefer webvpn group-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec group-policy Insiders! internal group-policy Insiders! attributes wins-server value 10.10.0.205 dns-server value 10.10.0.206 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value Insiders!_splitTunnelAcl default-domain value example.com username martijn password ****** encrypted privilege 15 username marcel password ****** encrypted privilege 15 tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group Insiders! type remote-access tunnel-group Insiders! general-attributes address-pool DHCP_VPN authentication-server-group SBS2003 LOCAL default-group-policy Insiders! tunnel-group Insiders! ipsec-attributes pre-shared-key ***** ! class-map global-class match default-inspection-traffic class-map type inspect http match-all asdm_medium_security_methods match not request method head match not request method post match not request method get ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map type inspect http http_inspection_policy parameters protocol-violation action drop-connection policy-map global-policy class global-class inspect dns inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect icmp inspect icmp error inspect mgcp inspect netbios inspect pptp inspect rtsp inspect snmp DenyV1 ! service-policy global-policy global smtp-server 123.123.123.123 prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily hpm topN enable Cryptochecksum:a76bbcf8b19019771c6d3eeecb95c1ca : end asdm image disk0:/asdm-635.bin asdm location svn.example.com 255.255.255.255 inside asdm location marvin.example.com 255.255.255.255 inside asdm location dns.example.com 255.255.255.255 inside asdm history enable

  Read the article

• .htaccess error "not allowed here" for all for all instructions

  - by andres descalzo

  I am using Debian Lenny and Apache 2. I changed the default .htaccess file with: AllowOverride AuthConfig But I always get the error message not allowed here when putting any instructions in the .htaccess file. EDIT: file default: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/ <Directory /> Options FollowSymLinks Order allow,deny Allow from all AllowOverride All </Directory> <Directory /var/www/> Options Indexes FollowSymLinks Includes #AllowOverride All #AllowOverride Indexes AuthConfig Limit FileInfo AllowOverride AuthConfig Order allow,deny Allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> .htaccess: #Options +FollowSymlinks # Prevent Directoy listing Options -Indexes # Prevent Direct Access to files <FilesMatch "\.(tpl|ini)"> Order deny,allow Deny from all </FilesMatch> # SEO URL Settings RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)\?*$ index.php?_route_=$1 [L,QSA] PHP info: apache2handler Apache Version = Apache/2.2.9 (Debian) PHP/5.2.6-1+lenny10 with Suhosin-Patch Apache API Version = 20051115 Server Administrator = webmaster@localhost Hostname:Port = hw-linux.homework:80 User/Group = www-data(33)/33 Max Requests = Per Child: 0 - Keep Alive: on - Max Per Connection: 100 Timeouts = Connection: 300 - Keep-Alive: 15 Virtual Server = Yes Server Root = /etc/apache2 Loaded Modules = core mod_log_config mod_logio prefork http_core mod_so mod_alias mod_auth_basic mod_authn_file mod_authz_default mod_authz_groupfile mod_authz_host mod_authz_user mod_autoindex mod_cgi mod_deflate mod_dir mod_env mod_mime mod_negotiation mod_php5 mod_rewrite mod_setenvif mod_status

  Read the article

• Postfix not sending email after upgrading to Ubuntu 12.04

  - by Luke

  After upgrading a server from Ubuntu 10.04 to 12.04, postfix is no longer sending email through sendgrid.com. I followed this guide about 6 months ago and everything had been working perfectly until the upgrade. Now it doesn't seem to be authenticating with sendgrid. This is the error I get in my syslog when I try to send an email. May 22 10:19:55 server postfix/smtp[3844]: 983B11C5DA: to=<to address>, relay=smtp.sendgrid.net[174.36.32.204]:587, delay=0.05, delays=0.01/0/0.04/0, dsn=5.0.0, status=bounced (host smtp.sendgrid.net[174.36.32.204] said: 550 Cannot receive from specified address <sendgrid username>: Unauthenticated senders not allowed (in reply to MAIL FROM command)) This is from postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = no config_directory = /etc/postfix header_size_limit = 4096000 inet_interfaces = loopback-only mailbox_size_limit = 0 mydestination = localhost, mylinode.members.linode.com myhostname = hostname mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 readme_directory = no recipient_delimiter = + relayhost = [smtp.sendgrid.net]:587 smtp_sasl_auth_enable = yes smtp_sasl_mechanism_filter = login smtp_sasl_password_maps = hash:/etc/postfix/sasl/sendgrid smtp_sasl_security_options = noanonymous smtp_tls_security_level = may smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes Any help would be greatly appreciated. I would be happy to post any other logs or other relevant information.

  Read the article

• Secondary IP (eth0:0) acts like main server IP

  - by George Tasioulis

  I have a CentOS server, configured with 4 consecutive IPs: eth0 5.x.x.251 eth0:0 5.x.x.252 eth0:1 5.x.x.253 eth0:2 5.x.x.254 The problem is that all traffic goes out to the internet with eth0:0 (5.x.x.252) as the source IP, instead of eth0. # curl ifconfig.me 5.x.x.252 How can I fix this, so that all traffic goes out via eth0, ie my main IP? PS: My server is VPS running on a Xen dom0, the latter being configured in routed mode networking. Thanks in advance! Server configuration # ifconfig eth0 Link encap:Ethernet HWaddr 00:x:x:x:x:AE inet addr:5.x.x.251 Bcast:5.x.x.255 Mask:255.255.255.255 inet6 addr: fe80::x:x:x:x/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14675569 errors:0 dropped:0 overruns:0 frame:0 TX packets:9463227 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4122016502 (3.8 GiB) TX bytes:25959110751 (24.1 GiB) Interrupt:23 eth0:0 Link encap:Ethernet HWaddr 00:x:x:x:x:AE inet addr:5.x.x.252 Bcast:5.x.x.255 Mask:255.255.255.224 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:23 eth0:1 Link encap:Ethernet HWaddr 00:x:x:x:x:AE inet addr:5.x.x.253 Bcast:5.x.x.255 Mask:255.255.255.224 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:23 eth0:2 Link encap:Ethernet HWaddr 00:x:x:x:x:AE inet addr:5.x.x.254 Bcast:5.x.x.255 Mask:255.255.255.224 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:23 # cat /etc/hosts 127.0.0.1 localhost.localdomain localhost 5.x.x.251 [fqdn] [hostname] # cat ifcfg-eth0 DEVICE=eth0 BOOTPROTO=static ONBOOT=yes IPADDR=5.x.x.251 NETMASK=255.255.255.224 SCOPE="peer 5.x.y.82" # cat ifcfg-eth0:0 DEVICE=eth0:0 BOOTPROTO=static ONBOOT=yes IPADDR=5.x.x.252 NETMASK=255.255.255.224 # cat route-eth0 ADDRESS0=0.0.0.0 NETMASK0=0.0.0.0 GATEWAY0=5.x.y.82 # netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 5.x.y.82 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 5.x.x.224 0.0.0.0 255.255.255.224 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 5.x.y.82 0.0.0.0 UG 0 0 0 eth0

  Read the article

• can't figure out why apache LDAP auth fails

  - by SethG

  Suddenly, yesterday, one of my apache servers became unable to connect to my LDAP (AD) server. I have two sites running on that server, both of which use LDAP to auth against my AD server when a user logs in to either site. It had been working fine two days ago. For reasons unknown, as of yesterday, it stopped working. The error log only says this: auth_ldap authenticate: user foo authentication failed; URI /FrontPage [LDAP: ldap_simple_bind_s() failed][Can't contact LDAP server], referer: http://mysite.com/ I thought perhaps my self-signed SSL cert had expired, so I created a new one for mysite.com, but not for the server hostname itself, and the problem persisted. I enabled debug-level logging. It shows the full SSL transaction with the LDAP server, and it appears to complete without errors until the very end when I get the "Can't contact LDAP server" message. I can run ldapsearch from the commandline on this server, and I can login to it, which also uses LDAP, so I know that the server can connect to and query the LDAP/AD server. It is only apache that cannot connect. Googling for an answer has turned up nothing, so I'm asking here. Can anybody provide insight to this problem? Here's the LDAP section from the apache config: <Directory "/web/wiki/"> Order allow,deny Allow from all AuthType Basic AuthName "Login" AuthBasicProvider ldap AuthzLDAPAuthoritative off #AuthBasicAuthoritative off AuthLDAPUrl ldaps://domain.server.ip/dc=full,dc=context,dc=server,dc=name?sAMAccountName?sub AuthLDAPBindDN cn=ldapbinduser,cn=Users,dc=full,dc=context,dc=server,dc=name AuthLDAPBindPassword password require valid-user </Directory>

  Read the article

• Mac OS X Client With Static DHCP Assignment Requests Wrong IP via Option 50

  - by Starchy

  I have a number of Mac (and a few Linux) laptops getting DHCP from a Force10 layer 3 switch, the only DHCP server on the subnet. There's a global dynamic pool, and for each full-time employee's laptop I have a single IP static pool set by MAC address. One and only one of the clients, running OS X 10.7.5, consistently fails to get a static assignment. The MAC address in the static pool definition has been carefully re-checked. Running tcpdump on a mirrored port when the laptop connects, I see that it is specifically requesting 10.100.0.252 (a dynamic address): 11:32:10.108280 IP (tos 0x0, ttl 255, id 28293, offset 0, flags [none], proto UDP (17), length 328) 0.0.0.0.bootpc > broadcasthost.bootps: [udp sum ok] BOOTP/DHCP, Request from 3c:07:54:xx:xx:xx (oui Unknown), length 300, xid 0x1399da89, Flags [none] (0x0000) Client-Ethernet-Address 3c:07:54:xx:xx:xx (oui Unknown) Vendor-rfc1048 Extensions Magic Cookie 0x63825363 DHCP-Message Option 53, length 1: Request Parameter-Request Option 55, length 9: Subnet-Mask, Default-Gateway, Domain-Name-Server, Domain-Name Option 119, LDAP, Option 252, Netbios-Name-Server Netbios-Node MSZ Option 57, length 2: 1500 Client-ID Option 61, length 7: ether 3c:07:54:xx:xx:xx Requested-IP Option 50, length 4: 10.100.0.252 Lease-Time Option 51, length 4: 7776000 Hostname Option 12, length 10: "host-name" END Option 255, length 0 PAD Option 0, length 0, occurs 8 I haven't been able to find any extra system prefs or unusual software on the laptop. Disabling the interface and rebooting or temporarily setting the IP manually both fail to make any difference. Any suggestions appreciated.

  Read the article

• Which IP should I use for my nameserver

  - by Luke Bream

  Sorry to ask whats probably very obvious question. I have just got a new server that is fantastically cheap but unfortunatly doesnt come with any technical support and Im very out of my depth ! My hosting company has provided the following information... Below you will find your additional IP addresses added to the server 5.9.36.51 Please note that you can use the subnet only for this server. IP: 5.9.225.64 /27 Mask: 255.255.255.224 Broadcast: 5.9.225.95 Useable IP addresses: 5.9.225.65 to 5.9.225.94 It has cPanel with WHM and im going through the setup... I have a number of questions... my domian is purchased from godaddy and I want to use it as the name server. Question 1: Which IP or IP's do I enter into the godaddy interface for ns1.mydomian.com ns2.mydomain.com Question 2: In the WHM nameserver setup what do I enter for... Please enter an IP address for each of your nameservers. ns1.mydomain.com ?????? ns2.mydomain.com ?????? Add "A Entries" for Hostname IP for Entry: ????????? Thanks for aany help you can give Luke

  Read the article

• MySQL -- enable connection to remote server via local /tmp/mysql.sock

  - by Kevin

  Hey all, I run a shared hosting provider and we're looking to move to a High Availability (replicated across multiple datacenters) setup for our hosting. We have created a replicated MySQL setup with failover that works wonderfully, and we'd like to move all of our clients' databases to it. The only trouble is that we have many many customers, all of whom have configured their Wordpress, Drupal, etc. installations to connect to MySQL via a local socket, not to the address of the remove server. I would hate to have to go through manually and change the connection statement in all of our clients' sites. What I'd ideally love to see is a program that listens on /tmp/mysql.sock and forwards connections there to the remote server I specify. I've seen SQL Relay, but it seems to require that I hardcode all of the database names and usernames and passwords into its configuration file. This is not going to work for me because our users add new databases dynamically all of the time, and I'd rather not have to write code to updated SQLRelay's config file every time. Does anyone have an idea on how to do this? Alternatively, I'd accept idea on how to handle this at the PHP level. (i.e. redirect any attempted calls to mysql_connect() to use that hostname rather than localhost) Thanks, Kevin

  Read the article

• MS SQL to MySQL using MySQL Migration Toolkit: permission issue

  - by Zeno

  I have a MS SQL imported into SQL Server 2008 from a .bak and I set it to Mixed mode. I have a SQL user (called "test") that can correctly access the database using SQL Server. I need to convert this to a MySQL database, so I got the MySQL Migration Toolkit. I pick "MS SQL Server" and then it asks for the hostname/username/password/database. I'm not 100% sure on these, but I used "localhost" (running on same computer), left the port as is (1433) and the username/password ("test") for the SQL Server. And I used the database name for the SQL Server database I'm looking to import. I clicked next, enter my MySQL database details and then attempt to run it and I get this error: Connecting to source database and retrieve schemata names. Initializing JDBC driver ... Driver class MS SQL JDBC Driver Opening connection ... Connection jdbc:jtds:sqlserver://localhost:1433/Orders;user=test;password=blah;charset=utf-8;domain= The list of schema names could not be retrieved (error: 0). ReverseEngineeringMssql.getSchemata :Network error IOException: Connection refused: connect Details: net.sourceforge.jtds.jdbc.ConnectionJDBC2.<init>(ConnectionJDBC2.java:372) net.sourceforge.jtds.jdbc.ConnectionJDBC3.<init>(ConnectionJDBC3.java:50) net.sourceforge.jtds.jdbc.Driver.connect(Driver.java:178) java.sql.DriverManager.getConnection(Unknown Source) java.sql.DriverManager.getConnection(Unknown Source) com.mysql.grt.modules.ReverseEngineeringGeneric.establishConnection(ReverseEngineeringGeneric.java:141) com.mysql.grt.modules.ReverseEngineeringMssql.getSchemata(ReverseEngineeringMssql.java:99) sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) java.lang.reflect.Method.invoke(Unknown Source) com.mysql.grt.Grt.callModuleFunction(Unknown Source)

  Read the article

• ServerName not working in Apache2 and Ubuntu

  - by CreativeNotice

  Setting up a dev LAMP server and I wish to allow dynamic subdomains, aka ted.servername.com, bob.servername.com. Here's my sites-active file <VirtualHost *:80> # Admin Email, Server Name, Aliases ServerAdmin [email protected] ServerName happyslice.net ServerAlias *.happyslice.net # Index file and Document Root DirectoryIndex index.html DocumentRoot /home/sysadmin/public_html/happyslice.net/public # Custom Log file locations LogLevel warn ErrorLog /home/sysadmin/public_html/happyslice.net/log/error.log CustomLog /home/sysadmin/public_html/happyslice.net/log/access.log combined And here's the output from sudo apache2ctl -S VirtualHost configuration: wildcard NameVirtualHosts and default servers: *:80 is a NameVirtualHost default server happyslice.net (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost happyslice.net (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost happyslice.net (/etc/apache2/sites-enabled/happyslice.net:5) Syntax OK The server hostname is srv.happyslice.net. As you can see from apache2ctl when I use happyslice.net I get the default virtual host, when I use a subdomain, I get the happyslice.net host. So the later is working how I want, but the main url does not. I've tried all kinds of variations here, but it appears that ServerName just isn't being tied to the correct location. Thoughts? I'm stumped. FYI, I'm running Apache2.1 and Ubuntu 10.04 LTS

  Read the article

• Connection established to google DNS, can't resolve any hosts

  - by Tar

  As you can see from the picture above, I am connected to google DNS but am unable to resolve any hostnames. When I try to ping sites like google.com, yahoo.com, etc, I get 'ping: unknown host'. Yes, I am able to ping localhost, I am able to ping hostname.domain.com, but not domain.com. I can't ping my nameservers. I can ping all hosts by IP address and that works. The output of my /etc/resolv.conf: nameserver 8.8.8.8 nameserver 8.8.4.4 Anyone know what the problem could be? 23:30:04.304955 IP my_server.44457 > 8.8.8.8.domain: 28349+ A? google.com. (28) 23:30:06.137985 IP 112.100.0.78.19781 > my_server.domain: 18717 [1au] A? www.my_domain.com. (46) 23:30:06.138286 IP my_server.domain > 112.100.0.78.19781: 18717*- 2/0/1 CNAME my_domain.com., A my_server (76) 23:30:06.686582 IP 112.100.0.74.19181 > my_server.domain: 65046 [1au] A? my_domain.com. (42) 23:30:06.686811 IP my_server.domain > 112.100.0.74.19181: 65046*- 1/0/1 A my_server (58) 23:30:07.043764 IP my_server.50465 > 4.2.2.1.domain: 13865+ PTR? 142.254.22.67.in-addr.arpa. (44) 23:30:09.065904 IP my_server.45242 > 8.8.4.4.domain: 29011+ PTR? 123.72.117.130.in-addr.arpa. (45) 23:30:09.310021 IP my_server.45440 > 8.8.4.4.domain: 28349+ A? google.com. (28)

  Read the article

• samba share not on network after upgrading to Ubuntu 12.04LTS. [migrated]

  - by Sylvain Huard

  I just upgraded an old Ubuntu box to 12.04LTS (machine named A-Ubuntu). This is an upgrade not a format re-install. All the accounts and config were preserved. The basic setup is a local network with 2 Ubuntu machines (let say A-Ubuntu, B-Ubuntu) and a MAC (C-MAC). Before the upgrade, all of them could see each other by their names not only the IP address. The local network has a D-Link Router where everybody is connected with RJ-45 wired etherenet (not wi-fi). Since the A-Ubuntu upgrade, we can't see this machine name on the Network and its name is not on machine list in the D-Link router anymore. We can see it's IP address only. I can't access A-Ubuntu from the other two by its name but I can ping it with its address (192.168.0.109). From A-Ubuntu, I can connect and see the shared samba folders on B-Ubuntu and C-MAC. But from B-Ubuntu and C-MAc, I can't connect to A-Ubuntu. Correct me if I'm wrong but this tells me that Samba should be fine and the real problem is that A-Ubuntu does not advertise its name on the Network so the D-Link does not have it in its table so nobody else finds it. After a lot of googling, I see that it is the job of avahi and mdns to do so. Those packages are running, I checked multiple config files for samba, avahi, mdns to see as if it is like the examples on the WEB and also similar to what I find on the working B-Ubuntu machine. This is the same. I did multiple service restart with samba, avahi, remove the firewall to make sure it does not block the hostname broadcast. I rebooted multiple time to make sure the update I was making were effective. Still, Can't see the A-Ubuntu name on the network. Any idea what it can be?, Where to look next?

  Read the article

• HP Procurve 2610 intervlan routing

  - by user19039

  Can anyone tell me why inter vlan routing is working for all vlans except my newly created vlan 4/ I have an hp procurve 2610. Any help would be appreciated. I have basically this 1 switch with all unmanaged switches attached to the core. We have a second 2610 on port 28 Running configuration: ; J9085A Configuration Editor; Created on release #R.11.25 hostname "Core_HP" interface 22 speed-duplex 100-full exit ip routing snmp-server community "public" Unrestricted vlan 1 name "DEFAULT_VLAN" untagged 1-12,17-22,26-27 ip address 192.168.4.6 255.255.255.0 tagged 25 no untagged 13-16,23-24,28 exit vlan 2 name "WAN" untagged 28 ip address 10.254.254.3 255.255.255.0 exit vlan 3 name "Wireless" untagged 13-16,24 ip address 192.168.7.6 255.255.255.0 ip helper-address 192.168.4.2 tagged 27 exit vlan 35 name "guest" untagged 23 tagged 24 exit vlan 4 name "esxi" untagged 25 ip address 10.10.1.1 255.255.248.0 exit ip route 192.168.5.0 255.255.255.0 10.254.254.1 ip route 192.168.6.0 255.255.255.0 10.254.254.1 ip route 0.0.0.0 0.0.0.0 192.168.4.10 show ip route IP Route Entries Destination Gateway VLAN Type Sub-Type M etric Dist. ------------------ --------------- ---- --------- ---------- - --------- ----- 0.0.0.0/0 192.168.4.10 1 static 1 1 10.10.0.0/21 esxi 4 connected 0 0 10.254.254.0/24 WAN 2 connected 0 0 127.0.0.0/8 reject static 0 250 127.0.0.1/32 lo0 connected 0 0 192.168.4.0/24 DEFAULT_VLAN 1 connected 0 0 192.168.5.0/24 10.254.254.1 2 static 1 1 192.168.6.0/24 10.254.254.1 2 static 1 1 192.168.7.0/24 Wireless 3 connected 0 0 show ip Internet (IP) Service IP Routing : Enabled Default TTL : 64 Arp Age : 20 VLAN | IP Config IP Address Subnet Mask Prox y ARP ------------ + ---------- --------------- --------------- ---- ----- DEFAULT_VLAN | Manual 192.168.4.6 255.255.255.0 No WAN | Manual 10.254.254.3 255.255.255.0 No Wireless | Manual 192.168.7.6 255.255.255.0 No esxi | Manual 10.10.1.1 255.255.248.0 No guest | Disabled

  Read the article

• Need troubleshooting advice for intermittent dns problems with requests on isp nameservers

  - by Mnebuerquo

  I've been having some intermittent dns problems with a web server, where certain isp's dns servers don't have my hostnames in cache and fail to look them up. At the same time, queries to opendns for those hostnames resolve correctly. It's intermittent, and it always works fine for me, so it's hard to identify the problem when someone reports connectivity problems to my site. My website is on a server running linux with Plesk. My dns records are configured with plesk (so my server is its own dns master). Domain name is registered with godaddy. I'm not real knowledgeable about dns, so I don't really know how to begin with troubleshooting. I've started learning to use dig, but while I can read the manpage to learn the syntax, I don't really know what questions to ask. Since the problem is intermittent I haven't been able to really catalog many symptoms. Symptoms I have observed: Certain people repeatedly reported intermittent problems connecting to my website. This was only from certain networks. (Ex: One guy could connect reliably from his office but not his home.) Sometimes I notice my browser taking a long time looking up the hostname for my site (Firefox shows a message in the status bar at the bottom). For me this is in the ten second range. ssh connections from anywhere to my server take a long time to connect but then seem to work fine once connected. So hopefully the folks on serverfault can point me to a good beginner tutorial for understanding dns, and suggest troubleshooting questions to ask next time one of my users reports connectivity problems.

  Read the article

• Window 7 image in vmware will allow network connection out but not http

  - by Ormis

  I am currently trying to create a set of images to deploy on my network, but I've run in to a snag. When I create my own Windows 7 image I can successfully use NAT for connecting to the network but whenever I try to access a webpage I get nothing. To be more specific, All firewalls/iptables are disabled on my host machine, my virtual machine, and my network. I can do lookups and all addresses respond correctly (i'm even using Google's DNS). On the host OS i have full connectivity. On the virtual machine I can ping any device I want and all addresses resolve correctly. Within a browser I cannot reach any page via hostname or IP. I feel almost like port 80 is being blocked but i can't find any reason this would be the case. If anyone has had this occur before, I would love some insight to the problem. I understand this question is a bit out of the norm for stackoverflow, but I've run out of ideas. Thank you for any help you can provide.

  Read the article

• vagrant and puppet security for ssl certificates

  - by Sirex

  I'm pretty new to vagrant, would someone who knows more about it (and puppet) be able to explain how vagrant deals with the ssl certs needed when making vagrant testing machines that are processing the same node definition as the real production machines ? I run puppet in master / client mode, and I wish to spin up a vagrant version of my puppet production nodes, primarily to test new puppet code against. If my production machine is, say, sql.domain.com I spin up a vagrant machine of, say, sql.vagrant.domain.com. In the vagrant file I then use the puppet_server provisioner, and give a puppet.puppet_node entry of “sql.domain.com” to it gets the same puppet node definition. On the puppet server I use a regex of something like /*.sql.domain.com/ on that node entry so that both the vagrant machine and the real one get that node entry on the puppet server. Finally, I enable auto-signing for *.vagrant.domain.com in puppet's autosign.conf, so the vagrant machine gets signed. So far, so good... However: If one machine on my network gets rooted, say, unimportant.domain.com, what's to stop the attacker changing the hostname on that machine to sql.vagrant.domain.com, deleting the old puppet ssl cert off of it and then re-run puppet with a given node name of sql.domain.com ? The new ssl cert would be autosigned by puppet, match the node name regex, and then this hacked node would get all the juicy information intended for the sql machine ?! One solution I can think of is to avoid autosigning, and put the known puppet ssl cert for the real production machine into the vagrant shared directory, and then have a vagrant ssh job move it into place. The downside of this is I end up with all my ssl certs for each production machine sitting in one git repo (my vagrant repo) and thereby on each developer's machine – which may or may not be an issue, but it dosen't sound like the right way of doing this. tl;dr: How do other people deal with vagrant & puppet ssl certificates for development or testing clones of production machines ?

  Read the article

• nginx reverse ssl proxy with multiple subdomains

  - by BrianM

  I'm trying to locate a high level configuration example for my current situation. We have a wildcard SSL certificate for multiple subdomains which are on several internal IIS servers. site1.example.com (X.X.X.194) -> IISServer01:8081 site2.example.com (X.X.X.194) -> IISServer01:8082 site3.example.com (X.X.X.194) -> IISServer02:8083 I am looking to handle the incoming SSL traffic through one server entry and then pass on the specific domain to the internal IIS application. It seems I have 2 options: Code a location section for each subdomain (seems messy from the examples I have found) Forward the unencrypted traffic back to the same nginx server configured with different server entries for each subdomain hostname. (At least this appears to be an option). My ultimate goal is to consolidate much of our SSL traffic to go through nginx so we can use HAProxy to load balance servers. Will approach #2 work within nginx if I properly setup the proxy_set_header entries? I envision something along the lines of this within my final config file (using approach #2): server { listen Y.Y.Y.174:443; #Internally routed IP address server_name *.example.com; proxy_pass http://Y.Y.Y.174:8081; } server { listen Y.Y.Y.174:8081; server_name site1.example.com; -- NORMAL CONFIG ENTRIES -- proxy_pass http://IISServer01:8081; } server { listen Y.Y.Y.174:8081; server_name site2.example.com; -- NORMAL CONFIG ENTRIES -- proxy_pass http://IISServer01:8082; } server { listen Y.Y.Y.174:8081; server_name site3.example.com; -- NORMAL CONFIG ENTRIES -- proxy_pass http://IISServer02:8083; } This seems like a way, but I'm not sure if it's the best way. Am I missing a simpler approach to this?

  Read the article

• fast way to find network user computer on domain hogging all wan bandwidth

  - by dasko

  i have a network of about 40 domain users and i have huge latency wan issues, like 1400ms for google.com pings. I have noticed that the problem goes away after everyone goes home for the day. I would like to know if i should use something like a hub with wireshark on the router or modem to see if there are any irregular activity. I am open to suggestions but i need to isolate which user has the bug. I am assuming it is either downloads or someone spamming out heavily and not knowing. It would be best to trace to ip number so i can just look into dns and find the pc hostname with the problem? This is the first client i have this problem with so never really needed to address it before but not suprised as users don't actually listen to any best practices that we have suggested. Please help, thanks. just to update, pc's to routers and other computers have ping latency of 1ms so it is right after i hit the wan, using tracert to a web site (random), that i get the massive delay in the responses. As well this is a dsl line with 5mb down and 650kb up (maybe upload saturation?) thanks.

  Read the article

• ownCloud WebDAV interface seems to be broken

  - by Nobleleader13245

  I've been trying to host ownCloud on my server but everytime I try to it tells me this : Your web server is not yet properly setup to allow files synchronization because the WebDAV interface seems to be broken. Please double check the installation guides. This is my setup : Windows Server 2012 R2 IIS 8.5 PHP 5.5.11 ownCloud 6.0.3 MySQL 5.6.17 I tried google the error but I can't seem to find anything usefull. Some say I should try if this works : [hostname]/remote.php/webdav/ and yes I can navigate to this folder and I can open files from there. The calendar works and I can also just upload files the web version of ownCloud the only thing that doesn't seem to work is the sync client. The sync client doesn't say anything it just doesn't connect (Screenshot : http://prntscr.com/3p2apz) This is the error log : Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:56:00+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:47+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:34+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:34+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:37+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:51:24+00:00 This is my php.ini : http://pastebin.com/es3MB8Uh Does anyone have any idea on how I should get this to work? I've been trying to get this to work for about 14 days now and it starts to annoy me =P

  Read the article

• Mac Share Points automatically authenticate with matching Windows AD credentials from Windows

  - by Ron L

  I recently started administering an OS X server (10.8) that is on the same network as our AD domain. While setting up Mac Share Points, I encountered some odd behavior that I hope someone can explain. For the purposes of this example assume the following: 1) Local User on OS X Server: frank, password: Help.2012 2) AD Domain User: frank, password: Help.2012 3) AD Domain: mycompany 4) OS X Server hostname: macserver (not bound to AD, not running OD) When joined to the domain on a a Win 7 computer and logged in as frank and accessing the shares at \\macserver, it automatically authenticates using frank's OS X credentials (because they are the same). However, if I change frank's OS X password, the standard Windows authentication dialog pops-up preset to use frank's AD domain (my company\frank). However, after entering the new OS X password, it will not authenticate without changing the domain to local (.\frank). Basically, if a user in AD has the same User name and password in OS X, it will authenticate automatically regardless of the domain. If the passwords differ, authenticating to the OS X shares must be done from the local machine. (and slightly off topic - how come an OS X administrator can access the root drives on the Mac server from Windows when accessing the Mac shares even when they aren't shared? In other words, it will show all the shared folders from "File Sharing" plus whatever drives are mounted in OS X)

  Read the article

• PsExec and Remote Environment Variables, Logging, Etc.

  - by alharaka

  When I run PsExec on a remote computer, I always fall short of what I want. What I would like ideally in most situations is a) a log on an admin server where each individual log has the name of each the remote computer it was generated from (e.g. COMPNAME1.log, COMPNAME2.log, etc.) or b) a log file on each remote computer with whatever name I specify. When I try scenario (a), I use the following command. %SystemDrive%\path\to\psexec.exe @listofcomputers.txt -u DOMAIN\username cmd /c echo TEST >> \\server.company.tld\share\%computername%.log Problem is that it never works. All the computers just write to the log where %computername% is just the computer I execute PsExec from in my office. What I want are unique logs for each computer specific in the listofcomputers.txt that will correctly use the hostname from the remote environment variable without issue. Is that even possible? It does not seem to work for me. I tried this, and the syntax is clearly wrong. %SystemDrive%\path\to\psexec.exe @listofcomputers.txt -u DOMAIN\username "cmd /c echo TEST >> \\server.company.tld\share\%computername%.log" PsExec just fails saying the system file cannot be found (read: syntax fail). As for scenario (b), it appears to be a variation of a similar problem. When I run a command like this, it does not work. %SystemDrive%\path\to\psexec.exe @listofcomputers.txt -u DOMAIN\username "cmd /c echo %computername% >> \\server.company.tld\share\aggregated.log" Is there something I do not understand about remote path and environment variables with PsExec on the cmd.exe console (I have not even tried the dreaded PowerShell yet). I know such things work in a batch file (cmd /c \\server.company.tld\share\runthis.bat), but is there a reason it will not work when executing commands as arguments? I always need this, and can never get it!

  Read the article

• Can't connect to MS SQL Server database using SSMS

  - by Charles

  I have a database on line with Godaddy (who uses SQL Server 2005). They provide basic management tools, but tell you that for more advanced tools you can connect directly using SSMS. I followed their instructions to ensure my online database will accept remote connections, and can apparently log in using SSMS with success (after giving my hostname and access data). However: Now from in SSMS, when attempting to expand the "Databases" folder tree, I get the following error: Failed to retrieve data for this request. (Microsoft.SqlServer.Management.Sdk.Sfc) An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) The server principal "cmitchell" is not able to access the database "3pointdb" under the current security context. (Microsoft SQL Server, Error: 916) The irony is that 3pointdb isn't my database. It is just another in a long list of databases that show up when I access my Godaddy backend. From SSMS, I selected the default database to be the name of my database, which it did locate on the list when I browsed. Still same error message. It is trying to connect to a database that isn't mine! :( Godaddy support, after a bit of testing, said the problem isn't on their end. it's on mine. – Charles

  Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >