Search Results

Search found 2096 results on 84 pages for 'kole odd'.

Page 51/84 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

  • is a factory pattern to prevent multuple instances for same object (instance that is Equal) good design?

    - by dsollen
    I have a number of objects storing state. There are essentially two types of fields. The ones that uniquly define what the object is (what node, what edge etc), and the oens that store state describing how these things are connected (this node is connected to these edges, this edge is part of these paths) etc. My model is updating the state variables using package methdos, so these objects all act as immutable to anyone not in Model scope. All Objects extend one base type. I've toyed with the idea of a Factory approch which accepts a Builder object and construct the applicable object. However, if an instance of the object already exists (ie would return true if I created the object defined by the builder and passed it to the equal method for the existing instance) the factory returns the current object instead of creating a new instance. Because the Equal method would only compare what uniquly defines the type of object (this is node A nto node B) but won't check the dynamic state stuff (node A is currently connected to nodes C and E) this would be a way of ensuring anyone that wants my Node A automatically knows it's state connections. More importantly it would prevent aliasing nightmares of someone trying to pass an instance of node A with different state then the node A in my model has. I've never heard of this pattern before, and it's a bit odd. I would have to do some overiding of serlization methods to make it work (ensure when I read in a serilized object I add it to my facotry list of known instances, and/or return an existing factory in it's place), as well as using a weakHashMap as if it was a weakHashSet to know rather an instance exists without worrying about a quasi-memory leak occuring. I don't know if this is too confusing or prone to it's own obscure bugs. One thing I know is that plugins interface with lowest level hardware. The plugins have to be able to return state taht is different then my memory; to tell my memory when it's own state is inconsistent. I believe this is possible despit their fetching objects that exist in my memory; we allow building of objects without checking their consistency with the model until the addToModel is called anyways; and the existing plugins design was written before all this extra state existed and worked fine without ever being aware of it. Should I just be using some other design to avoid this crazyness? (I have another question to that affect I'm posting).

    Read the article

  • Threads slowing down application and not working properly

    - by Belgin
    I'm making a software renderer which does per-polygon rasterization using a floating point digital differential analyzer algorithm. My idea was to create two threads for rasterization and have them work like so: one thread draws each even scanline in a polygon and the other thread draws each odd scanline, and they both start working at the same time, but the main application waits for both of them to finish and then pauses them before continuing with other computations. As this is the first time I'm making a threaded application, I'm not sure if the following method for thread synchronization is correct: First of all, I use two global variables to control the two threads, if a global variable is set to 1, that means the thread can start working, otherwise it must not work. This is checked by the thread running an infinite loop and if it detects that the global variable has changed its value, it does its job and then sets the variable back to 0 again. The main program also uses an empty while to check when both variables become 0 after setting them to 1. Second, each thread is assigned a global structure which contains information about the triangle that is about to be rasterized. The structures are filled in by the main program before setting the global variables to 1. My dilemma is that, while this process works under some conditions, it slows down the program considerably, and also it fails to run properly when compiled for Release in Visual Studio, or when compiled with any sort of -O optimization with gcc (i.e. nothing on screen, even SEGFAULTs). The program isn't much faster by default without threads, which you can see for yourself by commenting out the #define THREADS directive, but if I apply optimizations, it becomes much faster (especially with gcc -Ofast -march=native). N.B. It might not compile with gcc because of fscanf_s calls, but you can replace those with the usual fscanf, if you wish to use gcc. Because there is a lot of code, too much for here or pastebin, I created a git repository where you can view it. My questions are: Why does adding these two threads slow down my application? Why doesn't it work when compiling for Release or with optimizations? Can I speed up the application with threads? If so, how? Thanks in advance.

    Read the article

  • "shutting down hyper-v virtual machine management service"

    - by icelava
    I have a Windows 2008 R2 server that is a Hyper-V host (Dell PowerEdge T300). Today for the first time I encountered an odd situation; i lost connection with one of the guest machines but logging on physically it seems the guest OS is still running but no longer contactable via the network. I tried to shut down the guest machine (Windows XP) but it would not shut down, getting stuck in a "Not responding" dialog box that cannot be dismissed. I used the Hyper-V management console to reset the machine and it could not get out of resetting state. I tried to save another Windows 2003 guest machine, and it would be progress with its Saving state (0%). The other running Windows 2003 guest was stuck in the logon dialog. My first suspicion is perhaps one of the Windows update patches this week (10 Nov 2011) may something to do with it, which was still pending a system restart. Well, since I could not do anything with Hyper-V i proceeded with the Windows Update restart, and now it is stuck half an hour at "Shutting down hyper-v virtual machine management service" Prior to restarting I did not observe any hard disk errors reported in the system event log; doubt it is a disk-related condition. Shall I force a hard reboot? UPDATE As per answer report, it eventually restarted itself.

    Read the article

  • Kodak Scanner Software Issue 0xc0000005

    - by Andrew
    I am trying to be able to use a program called Kodak Smart Touch, but just today I have experienced an error preventing it from opening. The scanner is a business class scanner, an i2900. It comes with a small program called Kodak Smart Touch. This program allows you to select and customize a number of presets on the front panel and automatically create/save scanned files, etc. I was running a backup with Aomei Backupper at the time, and I wanted to scan a file. I tried to scan as normal, but right at the end the program quit with an error. Now, whenever I try to start Smart Touch, even not running the backup and with Aomei uninstalled, the following error pops up: Title of message: KSSCFG (version 1.7.15.121102) has stopped working. Body: See (path name) for more information. When I go to the path in the error message, there are two files, ERRORLOG.txt and KSSCFG.dmp. The error log says, "KSSCFG (version 1.7.15.322.121102) case an Access Violation(0xc0000005). Error occur at 2014/06/11 21:37:54 Operation System: Windows 7 64bits (6.1.7601) processor(s) type AMD x86 or x64" The dump file can be downloaded here: http://l.bitcasa.com/yzbtv1VV Opening it with a hex editor yields very little of use, but I do have an internal commandline utility that may help: http://l.bitcasa.com/cTXvAsst I've already uninstalled and reinstalled all the kodak software several times to no avail. What is really odd is that the TWAIN and ISIS drivers work fine through another scanning program. I am at my wit's end, and I have no idea what to do next. Thanks.

    Read the article

  • How can I set IIS Application Pool recycle times without resorting to the ugly syntax of Add-WebConfiguration?

    - by ObligatoryMoniker
    I have been scripting the configuration of our IIS 7.5 instance and through bits and pieces of other peoples scripts I have come up with a syntax that I like: $WebAppPoolUserName = "domain\user" $WebAppPoolPassword = "password" $WebAppPoolNames = @("Test","Test2") ForEach ($WebAppPoolName in $WebAppPoolNames ) { $WebAppPool = New-WebAppPool -Name $WebAppPoolName $WebAppPool.processModel.identityType = "SpecificUser" $WebAppPool.processModel.username = $WebAppPoolUserName $WebAppPool.processModel.password = $WebAppPoolPassword $WebAppPool.managedPipelineMode = "Classic" $WebAppPool.managedRuntimeVersion = "v4.0" $WebAppPool | set-item } I have seen this done a number of different ways that are less terse and I like the way this syntax of setting object properties looks compared to something like what I see on TechNet: Set-ItemProperty 'IIS:\AppPools\DemoPool' -Name recycling.periodicRestart.requests -Value 100000 One thing I haven't been able to figure out though is how to setup recycle schedules using this syntax. This command sets ApplicationPoolDefaults but is ugly: add-webconfiguration system.applicationHost/applicationPools/applicationPoolDefaults/recycling/periodicRestart/schedule -value (New-TimeSpan -h 1 -m 30) I have done this in the past through appcmd using something like the following but I would really like to do all of this through powershell: %appcmd% set apppool "BusinessUserApps" /+recycling.periodicRestart.schedule.[value='01:00:00'] I have tried: $WebAppPool.recycling.periodicRestart.schedule = (New-TimeSpan -h 1 -m 30) This has the odd effect of turning the .schedule property into a timespan until I use $WebAppPool = get-item iis:\AppPools\AppPoolName to refresh the variable. There is also $WebappPool.recycling.periodicRestart.schedule.Collection but there is no add() function on the collection and I haven't found any other way to modify it. Does anyone know of a way I can set scheduled recycle times using syntax consistent with the code I have written above?

    Read the article

  • Dell 2950 Perc 6/i "physical disk" and "Enclosure(Backplane)" under Connector 1 in OMSA tree- Troubleshoot help

    - by user66357
    Just looking for someone who might know why this could occur... In OMSA, on my Dell 2950, there usually is only one "Physical Disks" child under "Enclosure (Backplane)" in the tree view. Currently, the tree looks like this: Dell PERC 6/i Integrated Connector 1 (RAID) Enclosure (Backplane) Physical Disks (1:04 good, 1:05 removed) Physical Disks (1:33 Ready but unused) Normally it's like this: Connector 1 (RAID) Enclosure (Backplane) Physical Disks (1:04 good, 1:05 good) From the front, 6 of 6 3.5" SAS drives are connected. The server is showing Slot 5 as bad and the disk as removed. It seems that the drive in Slot 5 is being sensed as external to the Enclosure. Any ideas why this would happen? Think I can get away with rebuilding the virtual disk by replacing 1:05 with 1:33? Thanks. UPDATE: The only options on the Physical Disk 1:33 were Assign as Global Hot Spare and Clear... After clearing, I assigned it as the Global Hot Spare. This allowed the rebuilding of the virtual disk. Hopefully it won't fail. I'm still unsure of the reason for this odd behavior. I'm checking the firmware next.

    Read the article

  • Why is my mouse randomly deselecting and unclicking?

    - by Coldblackice
    (Windows 7 x64, Logitech MX1100 mouse) If I click/hold/ the mouse, like on the title bar of a folder to move it, or to select text, the mouse will randomly "unselect" it and then randomly reselect at another point in the movement. For example, if I were to start mouse-selecting the above paragraph, starting with "movement." and then moving backwards, it might select as far as "reselect", but then the selection would disappear, only to start selecting again from "will randomly". I realize this would sound like a clear-cut case for a hardware issue in the mouse button, but I've narrowed out that that's not the case. The problem doesn't happen if I drag-move/drag-select slowly. But I can make the problem very apparent if I click and drag something fast. For example, if I click and hold the title bar of a window, and then start quickly dragging it around in circles across my monitor, the window will get "dropped", and a new window will get picked up in the process. Additionally, if I right-click anywhere to get a context menu (in Windows, programs, anywhere/everywhere), and then relatively quickly press the left mouse button to select something on the context menu, the context menu will disappear as if I had clicked "through" it. I haven't had any driver changes, system updates, or significant software changes/updates/installations recently, that might be a precursor to this issue. Again, the oddity seems to be the "speed" of action. Another note -- it seems that "lag" has a bit to do with it. If I click and drag a window around quickly, it might start to "lag" a tad bit, like it's perhaps moving too fast for Windows to keep up with the refresh/redraw rate, and that's usually synonymous with this odd deselect bug happening. (Batteries fully charged, no damage or recent changes to mouse, no changes that might affect/block wireless communication)

    Read the article

  • Goldtouch USB Keyboard reverses keystrokes in fast typing -- expected?

    - by Justin Grant
    I am running into an odd keyboard problem: some key combinations end up reversed (e.g. "pl" ends up being emitted as "lp") when I'm typing quickly. The problematic ones are the key combos I hit with two adjacent fingers on my right hand-- in other words, the combos I can hit the fastest. No idea how fast is "fastest", but I guess around 50-150 msecs gap between them. I'm trying to track down whether this represents a failed keyboard, an inherent limitation of my Goldtouch USB keyboards, or a software problem on my Windows 7 Lenovo T500. I use a PS/2 version of the same Goldtouch keyboard at home with no problems. I've tried another USB keyboard with my laptop and can't repro the problem. I've also used this keyboard on other laptops without a problem. According to this SU thread, USB keyboards have higher latency than PS/2 keyboards-- up to 30 msecs. I find it hard to imagine that I can type key combos faster than 50 msecs, probably more like 100-150. Anyone encountered this problem with this or another keyboard? If so, how did you fix it? Any idea if there's a "keyboard log" or some way to diagnose the problem inside Windows?

    Read the article

  • 4in6 tunneling (via OpenVPN?)

    - by Deshene
    I have a local network with internet access. But unfortunately IPv4 internet connection speed is limited to 1mbps, which is realy sad. Fortunately I have a native IPv6, and there is no connection speed limit over IPv6. So, in order to get a good internet connection I made a plan: connect to the VPN-service over IPv6, and pass all IPv4 traffic through IPv6 tunnel, or something like that, I think you get the idea. I suggested to use service like HideMyAss.com, but unfortunately they don't support IPv6. The question is: Is there any existing VPN service that will make my dreams come true, and is easy to use, which I could connect over PPTP or OpenVPN (I want to set up connection to VPN in my router settings). Edit: It seems like there are couple of VPN services that supports IPv6 (it's odd, but the biggest VPN services support only IPv4), and there is none providing 4in6 tunnels. So, I came to the following solution: rent a VPS with IPv6 address, and manually setup 4in6 tunnel. I'm not good at networking, never did things like that, and don't know where to start, and what should I do. The use case, as I undestand, should look like this: I connect from my home computer to the VPS via OpenVPN, and after that all my IPv4 traffic pass through IPv6 (server do the job). OpenVPN - because I want to configure VPN connection to server in my router (Asus RT-N16?). How can I achieve this?

    Read the article

  • How can I solve the apache2 httpd error "mixing * ports and non-* ports with a NameVirtualHost addre

    - by rrc7cz
    Here is the error I get when booting up Apache2: * Starting web server apache2 apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName [Wed Oct 21 16:37:26 2009] [error] VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results [Wed Oct 21 16:37:26 2009] [error] VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results [Wed Oct 21 16:37:26 2009] [error] VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results [Wed Oct 21 16:37:26 2009] [error] VirtualHost *:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results [Wed Oct 21 16:37:26 2009] [warn] NameVirtualHost *:80 has no VirtualHosts I first followed this guide on setting up Apache to host multiple sites: http://www.debian-administration.org/articles/412 I then found a similar question on ServerFault and tried applying the solution, but it didn't help. Here is an example of my final VirtualHost config: <VirtualHost *:80> ServerAdmin [email protected] ServerName www.xxx.com ServerAlias xxx.com # Indexes + Directory Root. DirectoryIndex index.html DocumentRoot /var/www/www.xxx.com # Logfiles ErrorLog /var/www/www.xxx.com/logs/error.log CustomLog /var/www/www.xxx.com/logs/access.log combined </VirtualHost> with the domain X'd out to protect the innocent :-) Also, I have the conf.d/virtual.conf file mentioned in the guide looking like this: NameVirtualHost * The odd thing is that everything appears to work fine for two of the three sites.

    Read the article

  • Side-By-Side Configuration Error VC90.CRT

    - by Swiss
    I keep receiving the following error when trying to run MikTeX 2.8 or Visual Studio 2008 on 64-Bit Windows Vista. It's particularly odd because both programs were working problem free until a few days ago. The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail. Opening the Application log provides the following information: Activation context generation failed for "C:\Program Files (x86)\MiKTeX 2.8\miktex\bin\texworks.exe". Error in manifest or policy file "C:\Program Files (x86)\MiKTeX 2.8\miktex\bin\Microsoft.VC90.CRT.MANIFEST" on line 4. Component identity found in manifest does not match the identity of the component requested. Reference is Microsoft.VC90.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="9.0.30729.4148". Definition is Microsoft.VC90.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="9.0.30729.1". Please use sxstrace.exe for detailed diagnosis. It looks like the problem is with Microsoft.VC90.CRT.MANIFEST, but I am not sure why or how to fix this problem. I have tried uninstalling/reinstalling Visual Studio and MikTeX, as well as uninstalling/reinstalling Microsoft's C++ Redistributable, but nothing seems to be fixing this problem.

    Read the article

  • nginx subdomains improperly act like wildcard?

    - by binjured
    I have an odd problem with nginx subdomains. First, my configuration: server { listen 443 ssl; server_name secure.example.com; ssl_certificate example.crt; ssl_certificate_key example.key; keepalive_timeout 70; location / { fastcgi_pass 127.0.0.1:8000; ... } } server { listen 80; server_name example.com www.example.com; location / { fastcgi_pass 127.0.0.1:8000; ... } } The idea being that I have a secure domain, secure.example.com and a normal domain, example.com. In practice, I can go to https://example.com and http://secure.example.com. I worked around the second issue with an intermediary server: server { listen 80; server_name secure.example.com; rewrite ^(.*) https://secure.example.com$1 permanent; } But this is not an optimal solution and I'd have to create another one to redirect https on the tld to the subdomain. I feel like I must be doing something wrong if I need multiple servers like that. Why does https://example.com work when there is no server listening on 443 there? Shouldn't it just fail to connect? I'm rather confused.

    Read the article

  • What is Apache Synapse?

    - by Aren B
    My website keeps getting hit by odd requests with the following user-agent string: Mozilla/4.0 (compatible; Synapse) Using our friendly tool Google I was able to determine this is the hallmark calling-card of our friendly neighborhood Apache Synapse. A 'Lightweight ESB (Enterprise Service Bus)'. Now, based on this information I was able to gather, I still have no clue what this tool is used for. All I can tell is that is has something to do with Web-Services, and supports a variety of protocols. The Info page only leads me to conclude it has something to do with proxies, and web-services. The problem I've run into is that while normally I wouldn't care, we're getting hit quite a bit by Russian IPs (not that russian's are bad, but our site is pretty regionally specific), and when they do they're shoving wierd (not xss/malicious at least not yet) values into our query string parameters. Things like &PageNum=-1 or &Brand=25/5/2010 9:04:52 PM. Before I go ahead and block these ips/useragent from our site, I'd like some help understanding just what is going on. Any help would be greatly appreciated :)

    Read the article

  • Tomcat 6 Windows Server 64 Redirect Connector Fails

    - by Rafe
    So is there some problem with running the Tomcat connectors under a 64 bit windows OS? Here's my configuration: Windows Server 2003 64 bit Intel Xeon Tomcat 6.0.26 JVM 1.6.0 (64bit) ISAPI Redirect Connector 1.2.30.0 (64 bit) Calling the IP address of the site with :8080 brings up the tomcat page so I know that's running and the examples all work so its obviously not having a problem with the JVM. Calling the site ip on port 80 however gives me error 324 - looking at the application log on windows shows "Could not load all ISAPI filters for site/service. Therefore startup aborted". The ISAPI filter page under the web site properties shows the status of this filter to be down with a red arrow. The ISAPI filter name is jakarta and there is a corresponding virtual directory set up in the root of the site pointing to the same directory as the filter. The jakarta web service extension is also pointing to the required dll (c:\program files\apache software foundation\jakarta isapi redirector\bin\isapi_redirect.dll). Incidentally, this same problem occurs when trying to use Tomcat 5.5. I've also tried swapping out various redirect versions. It's really odd because I got it to work once with a version of the redirector that came with Plesk but I've since uninstalled everything to do with plesk and even trying to use the plesk-compiled dll doesn't work now. I am pulling my hair out on this, any ideas?

    Read the article

  • What can cause an increase in inactive memory and how to reclaim it?

    - by Boaz
    Hi All, I have heavy application running on a CentOS server and I'm seeing a strange memory behavior. Here is a snapshot of a munin graph: As you can see the amount of committed memory increases gradually causing the swap file to be use. What strikes me odd is that the amount of inactive memory keeps growing as well. It is my understanding that the inactive memory is actually memory freed up but not yet clean by the OS and put back in the free memory pool. It seems that running out of memory is acutally caused by this lack of clean up, but I may be wrong. Can you give some tips to find the cause of the problem and/or cause CentOS to reclaim the inactive memory? Thanks. Some extra info: 1) I have a tmpfs mounted on /tmp and the number of files stored there grows (but it is double the amount of the inactive memory). 2) cat /proc/meminfo (at a later stage than the image) gives: MemTotal: 14371428 kB MemFree: 1207108 kB Buffers: 35440 kB Cached: 4276628 kB SwapCached: 785316 kB Active: 9038924 kB Inactive: 3902876 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 14371428 kB LowFree: 1207108 kB SwapTotal: 10223608 kB SwapFree: 6438320 kB Dirty: 627792 kB Writeback: 0 kB AnonPages: 7844560 kB Mapped: 49304 kB Slab: 146676 kB PageTables: 27480 kB NFS_Unstable: 0 kB Bounce: 0 kB CommitLimit: 17409320 kB Committed_AS: 16471488 kB VmallocTotal: 34359738367 kB VmallocUsed: 275852 kB VmallocChunk: 34359462007 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 Hugepagesize: 2048 kB 3) The application is a combination of MySQL, Heritrix (http://crawler.archive.org/ ) and a Tomcat based Java servlet to manage things.

    Read the article

  • What can cause an increase in inactive memory and how to reclaim it?

    - by Boaz
    I have heavy application running on a CentOS server and I'm seeing a strange memory behavior. Here is a snapshot of a munin graph: As you can see the amount of committed memory increases gradually causing the swap file to be use. What strikes me odd is that the amount of inactive memory keeps growing as well. It is my understanding that the inactive memory is actually memory freed up but not yet clean by the OS and put back in the free memory pool. It seems that running out of memory is acutally caused by this lack of clean up, but I may be wrong. Can you give some tips to find the cause of the problem and/or cause CentOS to reclaim the inactive memory? Thanks. Some extra info: 1) I have a tmpfs mounted on /tmp and the number of files stored there grows (but it is double the amount of the inactive memory). 2) cat /proc/meminfo (at a later stage than the image) gives: MemTotal: 14371428 kB MemFree: 1207108 kB Buffers: 35440 kB Cached: 4276628 kB SwapCached: 785316 kB Active: 9038924 kB Inactive: 3902876 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 14371428 kB LowFree: 1207108 kB SwapTotal: 10223608 kB SwapFree: 6438320 kB Dirty: 627792 kB Writeback: 0 kB AnonPages: 7844560 kB Mapped: 49304 kB Slab: 146676 kB PageTables: 27480 kB NFS_Unstable: 0 kB Bounce: 0 kB CommitLimit: 17409320 kB Committed_AS: 16471488 kB VmallocTotal: 34359738367 kB VmallocUsed: 275852 kB VmallocChunk: 34359462007 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 Hugepagesize: 2048 kB 3) The application is a combination of MySQL, Heritrix (http://crawler.archive.org/ ) and a Tomcat based Java servlet to manage things.

    Read the article

  • 16-bit MS-DOS Subsystem: csrss.exe

    - by Wesley
    Hi all, I just booted up my Samsung N120 netbook (with Windows XP Home SP3) and a dialog box came up with a command prompt window behind it. The dialog box is titled 16 bit MS-DOS Subsystem and the message is as follows: C:\DOCUME~1\SAMSUNG\csrss.exe The NTVDM CPU has encountered an illegal instruction. CS:0544 IP:0117 OP:63 00 64 00 34 Choose 'Close' to terminate the application. This only started on my most recent boot-up. One thing to note is that when I downloaded the Dropbox installer and opened it up, Panda Cloud Antivirus detected a suspicious file, which was csrss.exe and "neutralized it." However, an actual virus or trojan was not detected immediately before the file was detected and neutralized. Just under two weeks ago, a trojan and two viruses were detected for some odd reason. (I only went to website I knew and I do not torrent or browse adult sites.) Anyhow, the two viruses came up in temporary files and the trojan was "neutralized." Anyways, the main question is: How can I repair the csrss.exe file such that Windows XP starts up properly? A screenshot could be posted upon request. Thanks in advance!

    Read the article

  • What can cause an increase in inactive memory and how to reclame it?

    - by Boaz
    Hi All, I have heavy application running on a CentOS server and I'm seeing a strange memory behavior. Here is a snapshot of a munin graph: As you can see the amount of committed memory increases gradually causing the swap file to be use. What strikes me odd is that the amount of inactive memory keeps growing as well. It is my understanding that the inactive memory is actually memory freed up but not yet clean by the OS and put back in the free memory pool. It seems that running out of memory is acutally caused by this lack of clean up, but I may be wrong. Can you give some tips to find the cause of the problem and/or cause CentOS to reclaim the inactive memory? Thanks. Some extra info: 1) I have a tmpfs mounted on /tmp and the number of files stored there grows (but it is double the amount of the inactive memory). 2) cat /proc/meminfo (at a later stage than the image) gives: MemTotal: 14371428 kB MemFree: 1207108 kB Buffers: 35440 kB Cached: 4276628 kB SwapCached: 785316 kB Active: 9038924 kB Inactive: 3902876 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 14371428 kB LowFree: 1207108 kB SwapTotal: 10223608 kB SwapFree: 6438320 kB Dirty: 627792 kB Writeback: 0 kB AnonPages: 7844560 kB Mapped: 49304 kB Slab: 146676 kB PageTables: 27480 kB NFS_Unstable: 0 kB Bounce: 0 kB CommitLimit: 17409320 kB Committed_AS: 16471488 kB VmallocTotal: 34359738367 kB VmallocUsed: 275852 kB VmallocChunk: 34359462007 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 Hugepagesize: 2048 kB

    Read the article

  • Asus WL-520GU conflicting subnet (and/or IP) with 2Wire DSL

    - by Paula
    I have an Asus wireless router: WL-520GU... and an AT&T 2Wire for my DSL connection. When I try to browse anywhere, I just get an odd message from the Asus router (in the common Asus broken-English, bad formatting, and awful spelling): http://postimage.org/image/upxrjflcj I guess it's trying to say: Your Asus Router and your 2Wire have the same subnet mask. (It doesn't say if that's good, or bad... but it sounds like they must be different.) but... But for the "solution" it looks like it's trying to say: Your Asus Router and your 2Wire have the same IP address. My Asus has the defaults: 192.168.1.1 and 255.255.255.0 My 2Wire has: 192.168.1.66 I'm not seeing where the conflict(s) could be. The Asus firmware is v3.0.0.14 . None of these problems occur with the old v3.0.0.8 firmware. Any ideas on how to fix this? (PLEASE don't say to run a totally different DD/Tomato firmware because it's "better". I need to fix THIS 1 problem, not try to convince my company to switch everything to an entirely different set of problems.)

    Read the article

  • Windows 2008 RemoteAPP client disconnects within a matter of minutes

    - by Jeroen Wilke
    I'm having an odd problem with Windows 2008 TS, and remote applications specifically. The situation is as follows: TS idle timeout is disabled via GPO TS terminating disconnected sessions after 1hr (via GPO) My users can log on to the Terminal server, and get a full desktop, OR via rdp files that give access to a few remote applications. When a user connects to a full desktop, everything is fine and dandy, they will remain logged on indefinately, and when they disconnect the session is terminated after an hour. however, when a user connects using a remote application link, the client seems to disconnect after only a few minutes of inactivity, when you click the window, the session reconnects. EventID's on TS server: 4779: This event is generated when a user disconnects from an existing Terminal Services session, or when a user switches away from an existing destop using Fast User Switching. 4778 : This event is generated when a user reconnects to an existing Terminal Services session, or when a user switches to an existing desktop using Fast User Switching users are connecting directly to 3389, not using a TS-gateway at the moment. This behavior is consistent on different clients that we have, Full desktop is fine, RemoteAPP constantly disconnects. The .rdp file used doesn't list any interesting parameters, aside from what application to launch, and where to find it. Can someone explain to me how there can be a difference in behaviour between full desktop, and remoteapp ? since essentially they use the exact same client ? Regards Jeroen

    Read the article

  • Preseeding Ubuntu partman recipe using LVM and RAID

    - by Swav
    I'm trying to preseed Ubuntu 12.04 server installation and created a recipe that would create RAID 1 on 2 drives and then partition that using LVM. Unfortunately partman complains when creating LVM volumes saying there no partitions in recipe that could be used with LVM (in console it complains about unusable recipe). The layout I'm after is RAID 1 on sdb and sdc (installing from USB stick so it takes sda) and then use LVM to create boot, root and swap. The odd thing is that if I change the mount point of boot_lv to home the recipe works fine (apart from mounting in wrong place), but when mounting at /boot it fails I know I could use separate /boot primary partition, but can anybody tell me why it fails. Recipe and relevant options below. ## Partitioning using RAID d-i partman-auto/disk string /dev/sdb /dev/sdc d-i partman-auto/method string raid d-i partman-lvm/device_remove_lvm boolean true d-i partman-md/device_remove_md boolean true #d-i partman-lvm/confirm boolean true d-i partman-auto-lvm/new_vg_name string main_vg d-i partman-auto/expert_recipe string \ multiraid :: \ 100 512 -1 raid \ $lvmignore{ } \ $primary{ } \ method{ raid } \ . \ 256 512 256 ext3 \ $defaultignore{ } \ $lvmok{ } \ method{ format } \ format{ } \ use_filesystem{ } \ filesystem{ ext3 } \ mountpoint{ /boot } \ lv_name{ boot_lv } \ . \ 2000 5000 -1 ext4 \ $defaultignore{ } \ $lvmok{ } \ method{ format } \ format{ } \ use_filesystem{ } \ filesystem{ ext4 } \ mountpoint{ / } \ lv_name{ root_lv } \ . \ 64 512 300% linux-swap \ $defaultignore{ } \ $lvmok{ } \ method{ swap } \ format{ } \ lv_name{ swap_lv } \ . d-i partman-auto-raid/recipe string \ 1 2 0 lvm - \ /dev/sdb1#/dev/sdc1 \ . d-i mdadm/boot_degraded boolean true #d-i partman-md/confirm boolean true #d-i partman-partitioning/confirm_write_new_label boolean true #d-i partman/choose_partition select Finish partitioning and write changes to disk #d-i partman/confirm boolean true #d-i partman-md/confirm_nooverwrite boolean true #d-i partman/confirm_nooverwrite boolean true EDIT: After a bit of googling I found below snippet of code from partman-auto-lvm, but I still don't understand why would they prevent that setup if it's possible to do manually and booting from boot partition on LVM is possible. # Make sure a boot partition isn't marked as lvmok if echo "$scheme" | grep lvmok | grep -q "[[:space:]]/boot[[:space:]]"; then bail_out unusable_recipe fi

    Read the article

  • Why are my Windows 7 updates continuously failing?

    - by Chris C.
    I'm an advanced level user here with an odd issue. I have two Windows Updates that are failing to install, every single time. I'm getting a mysterious "Code 1" error on both updates, an error for which I'm having difficulty finding a solution. The updates in question are: Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243) System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [May 2011] Because these updates are failing, the Shut Down button in my start menu always has the shield icon next to it, indicating that "new" updates will be installed on shut down. But, of course, they'll fail and when the PC is restarted, the shield icon is still there. When checking the update history and viewing the details of the failed updates, I get the following: Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243) Installation date: ?6/?29/?2011 3:00 AM Installation status: Failed Error details: Code 1 Update type: Important A security issue has been identified leading to MFC application vulnerability in DLL planting due to MFC not specifying the full path to system/localization DLLs. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer. More information: http://go.microsoft.com/fwlink/?LinkId=216803 System Update Readiness Tool for Windows 7 for x64-based Systems (KB947821) [May 2011] Installation date: ?6/?28/?2011 3:00 AM Installation status: Failed Error details: Code 1 Update type: Important This tool is being offered because an inconsistency was found in the Windows servicing store which may prevent the successful installation of future updates, service packs, and software. This tool checks your computer for such inconsistencies and tries to resolve issues if found. More information: http://support.microsoft.com/kb/947821 About My System I'm running Windows 7 Home Premium x64 Edition. This is a custom PC build and the OS was installed fresh, not an upgrade from a previous version. I've been running this system for about 4 months. Windows Updates aside, the system is usually quite stable. Thanks in advance for your help!

    Read the article

  • webserver horrible slow, sometimes incredible fast

    - by dhanke
    i am running a small community ( 6000+ Members ) on a non-virtual 64-bit ubuntu 11.04 system. I am not a Linux-pro, not even advanced, i just tried to setup a webserver, which does nothing special actually. Delivering some dynamic PHP and RoR websites is its task. So it might be that my configuration files do look horrible bad. Also, i might use the wrong vocabulary, so in doubt, please ask. Having a current all-time record of 520 registered users (board-accounts, no system-users) online at same time, average server-load is about 2.0 - 5.0. Meantime (~250 users) average server load value is at about 0.4 - 0.8, sometimes, on some expensive searches a bit higher. everything fine. From time to time however, the load increases up to 120 (120.0, not 12.0 ;) ). In this time, its hard to even connect via SSH, but when i reach the server, and use top/htop/iotop to see whats happening, i cannot identify any process causing high CPU load. iotop tells me about a current reading/writing speed of about approx. 70kb/s, which is quite equal to power-off i think. Memory-Usage is max. at ~ 12GB of 16GB, so swap remains empty. now the odd (at least for me:) waiting some minutes ( since i always get a bit into a panic when this happens, it feels like 5 minutes, but i suppose its more like 20-30 minutes) and the server is back to normal. everything continues as normal. another odd fact: when i run hdparm -tT /dev/sda, i get answer like: /dev/sda: Timing cached reads: 7180 MB in 2.00 seconds = 3591.13 MB/sec Timing buffered disk reads: 348 MB in 3.02 seconds = 115.41 MB/sec when i run the same command while the server is "frozen", the answer is like /dev/sda: <- takes about 5 minutes until this line appears Timing cached reads: 7180 MB in 2.00 seconds = 3591.13 MB/sec <- 5 more minutes Timing buffered disk reads: 348 MB in 3.02 seconds = 115.41 MB/sec <- another 5 minutes so the values are the same, but the quoted time is completely wrong. using time command as prefix also tells me that ~ 15 minutes were used. I searched in dmesg, /var/log/[messages|syslog] - nothing found. /var/log/errors however tells me that: Jul 4 20:28:30 localhost kernel: [19080.671415] INFO: task php5-fpm:27728 blocked for more than 120 seconds. Jul 4 20:28:30 localhost kernel: [19080.671419] "echo 0 /proc/sys/kernel/hung_task_timeout_secs" disables this message. multiple times. now that message does tell me that php5-fpm task was blocked or did block ? - but not if that is the cause or just one of the results of that "freeze". Anyone? to cut the long story short, i dont know where even to start analyzing. So if you can give me any advice by looking at following specs and configs, or ask me to provide more information, i`d be glad. Specs: 6 Core AMD Phenom(tm) II X6 1055T Processor * 16 Gigabyte Ram 2x 1.5 TB Seagate ST1500DL003-9VT16L via SATA 3 via SoftwareRaid (i suppose) Services: (due to service --status-all, those with [ + ]) nginx Webserver 1.0.14 mySQL 5.1.63 Server Ruby on Rails 2.3.11 ( passenger-nginx-module ) php5-fpm 5.3.6-13ubuntu3.7 SSH ido2db Further services: default crontab + nightly backup. syslog-ng Website consists of 2 subdomains, forum. and www. where forum is a phpBB3.x PHP-Board, and www a Ruby on Rails 2.3.11 application (portal). Mini-Note: sometimes i notice that the forum is pretty slow, in contrast to the always-fast (except for this "freeze") portal. Both share the same Database, but the portal is using it read-only. The Webserver is nginx, using phusion passenger module to communicate with the ruby-application. Also, for the forum it communicates with php5-fpm via socket: relevant nginx configuration parts ( with comments/questions starting by ; ) ; in case of freeze due to too high Filesystem activity, maybe adding a limit? #worker_rlimit_nofile 50000; user www-data; ; 6 cores, so i read 6 fits. maybe already wrong? worker_processes 6; pid /var/run/nginx.pid; events { worker_connections 1024; } http { passenger_root /var/lib/gems/1.8/gems/passenger-3.0.11; passenger_ruby /usr/bin/ruby1.8; ; the forum once featured a chat, which was working w/o websockets. ; so it was a hell of pull requests (deactivated now, freeze still happening) keepalive_timeout 65; keepalive_requests 50; gzip on; server { listen 80; server_name www.domain.tld; root /var/www/domain/rails/public; passenger_enabled on; } server { listen 80; server_name forum.domain.tld; location / { root /var/www/domain/forum; index index.php; } ; satic stuff to be handled by nginx location ~* ^/style/.+.(jpg|jpeg|gif|css|png|js|ico|xml)$ { access_log off; expires 30d; root /var/www/domain/forum/; } ; now the php magic, note the "backend"-fcgi_pass location ~ .php$ { fastcgi_split_path_info ^(.+\.php)(.*)$; fastcgi_pass backend; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/domain/forum$fastcgi_script_name; include fastcgi_params; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_intercept_errors on; fastcgi_ignore_client_abort off; fastcgi_connect_timeout 60; fastcgi_send_timeout 180; fastcgi_read_timeout 180; fastcgi_buffer_size 128k; fastcgi_buffers 256 16k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; fastcgi_max_temp_file_size 0; } location ~ /\.ht { deny all; } } ;the php5-fpm socket. i read that /dev/shm/ whould be the fastes place for this. bad idea in general? upstream backend { server unix:/dev/shm/phpfpm; } ... } php5-fpm settings (i changed this values due to php5-fpm error log messages higher and higher.. (freeze-problem was there before as well)* listen = /dev/shm/phpfpm user = www-data group = www-data pm = dynamic ; holy, 4000! well, shinking this value to earth-level gave me ; 100s of 502 bad gateway commands. this values were quite stable. ; since there are only max 520 users online i dont get it, why i would need ; as many children as configured here. due to keep-alive maybe? ; asking questions is easier for me since restarting server will make ; my community-members angry ;) pm.max_children = 4000 pm.start_servers = 100 pm.min_spare_servers = 50 pm.max_spare_servers = 150 pm.max_requests = 10 pm.status_path = /status ping.path = /ping ping.response = pong slowlog = log/$pool.log.slow ;should i use rlimit? ;rlimit_files = 1024 chdir = / mysql/my.cnf [client] port = 3306 socket = /var/run/mysqld/mysqld.sock [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking bind-address = 127.0.0.1 key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 myisam-recover = BACKUP ; high number, but less gives some phpBB errors. max_connections = 450 table_cache = 512 ; i read twice the cpu cores, bad? thread_concurrency = 12 join_buffer_size = 2084K concurrent_insert = 3 query_cache_limit = 64M query_cache_size = 512M query_cache_type = 1 log_error = /var/log/mysql/error.log log_slow_queries = /var/log/mysql/mysql-slow.log long_query_time = 2 expire_logs_days = 10 max_binlog_size = 100M low_priority_updates=1 [mysqldump] quick quote-names max_allowed_packet = 16M [isamchk] key_buffer = 16M !includedir /etc/mysql/conf.d/ I used smartctl already, hdds seem to be fine. /proc/mdstatus quotes: Personalities : [raid1] [linear] [multipath] [raid0] [raid6] [raid5] [raid4] [raid10] md3 : active raid1 sda3[1] 1459264192 blocks [2/1] [_U] md1 : active raid1 sda1[0] 3911680 blocks [2/1] [U_] unused devices: ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 127727 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 127727 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited I quote some questions in my configuration files, these are not (intentional) directly problem-related, but would be nice for me to know wether they are indeed questionable or done right. One additional Fact: my MYSQL-database is at 12GB size. i dont know if that does matter, but mytop sometimes shows me 4-5 seconds long insert queries, some are 20-30 seconds long. Its just a feeling that i am unable to prove (because i dont know how), but when i disable the database, the freeze seems not to happen. Example: i created a dummy rails application to see the development log. the app made some sql-queries, reads and inserts. the log quite often was like: DbTest Load (0.3ms) SELECT * FROM `db_test` WHERE (`db_test`.`id` = 31722) LIMIT 1 SQL (0.1ms) BEGIN DbTest Update (0.3ms) UPDATE `db_test` SET `updated_at` = '2012-07-04 23:32:34' WHERE `id` = 31722 - now the log stands still for 5-60 seconds. SQL (49.1ms) COMMIT - SQL-Update time in the log does not include freeze time Rendering test/index Completed in 96ms (View: 16, DB: 59) | 200 OK [http://localhost:9000/test] Bad part is: this mini-freeze here only happens from time to time as well. note: meanwhile i cannot even upload files via scp. I currently feel like running form bad to worse and back by googling for my server-problem due to immense lack of knowledge regarding server configurations. It still makes me wonder, why those problems even appear, since 250 users a time is not such a high amount, right? So my questions: whats wrong and how to fix? ;) or: what information can i provide to make the situation more clear? can you point at some critical bad configuration-line which i should consider to catch up in the documentation? are there any tools i can run to see some possible bottlenecks? any further advice? (next to: "pay someone who knows what he does" - its a private project, server costs enough already. :)) Thanks for your time and help. Best Regards, Daniel P.S.: i renamed the configfiles to domain.tld since i dont want to have any % more load to the server until its fixed. might be a exaggeratedly thought.. P.P.S: if i asked a complete duplicate question, sorry. my search results seemed to be quite specific in their own way.

    Read the article

  • USB Wifi will not connect on Windows 7 (Even though the driver installs OK)

    - by Pete Roberts
    Windows 7 will not connect to a WiFi Netowrk using a USB Network Adapter. I have 3 adapters, A Senoa SUB 364 (EXT), a Repeatit SU2410 USB V2 and a ZYXEL G202. All of these devices install OK on Windows 7 Home Premium on my Destop PC (64 bit) and on my Asus Wii Netbook (32 bit). In each case the adapter can be enabled/disabled and the driver properties says it is working correctly. When I try and connect to a network Windows 7 behaves as though the adapter does not exist and reports no networks. The Wii has an integrated adapter which works perfectly under Windows and connects to either of the 3 networks available to me. I have done all the checks I can on the configuration. What seems odd to me is that it happens to all 3 devices on 2 different windows 7 PCs both of which are working perfectly in any other respect. This suggests the common denominator is me and I must be doing something wrong.. what's also strange is that I cannot find any similar problems being reported on any of the forums. From what reading I've been able to do it seems like the new wifi virtualisation thingy in W7 is not recognising the adapters which suggests I', missing a configuration option somewhere. Looking forward to finding out if I'm not alone or just being stupid. Pete

    Read the article

  • Remote NX login to Ubuntu, Gnome can't mount CD/DVD drive

    - by T.J. Crowder
    Even though I'm sitting next to it, I log into my Ubuntu 10.04 LTS system via NX Free Edition from another system at the moment (this is temporary, not worth buying a KVM for). Curiously, though, when I do that Gnome's auto-mounting fails for CD/DVD media (I haven't tried other kinds) with a "Not Authorized" error. For instance here's what happens when I put the Ubuntu 10.04 LTS installation CD in: This does not happen if I log into it locally (not via NX) with the same user account. When using NX, I can mount the media if I go to mount directly: tjc@midnight:~$ sudo mkdir /media/dvd tjc@midnight:~$ sudo mount -r -t iso9660 /dev/sr0 /media/dvd tjc@midnight:~$ ls /media/dvd autorun.inf casper dists install isolinux md5sum.txt pics pool preseed README.diskdefines ubuntu wubi.exe ...which, along with the "not authorized" error, suggests some kind of permissions problem to me (doh). What I find odd is that the same user is involved in both cases (local and via NX). I'm new to Ubuntu on the desktop (used it and other distros on servers for years), so I'm afraid I don't know how this auto-mounting is happening. I think it's handled by the gvfs package and its daemon, but that's about as far as I got (and perhaps I've taken a left turn even getting that far). Although I can work around it with mount, does anyone know how I might get auto-mounting to work?

    Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >