Search Results

Search found 19625 results on 785 pages for 'local groups'.

Page 51/785 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

  • Local admin password recovery: Windows Vista

    - by Jim Dennis
    I am faced with an unsettling situation. A friend of my father's has rather suddenly become a widower. Naturally they've taken care of the bank accounts and all the normal mundane things that people have been doing for a century or so. However, she was the computer user of the household. He was aware that they had some online banking stuff and bill paying stuff ... and that she spent lots of time on FaceBook and stuff like that. However, he doesn't know what her local passwords were (actually only vaguely aware that her couple of desktop and couple of laptop system even had passwords). He's never heard of "admin" passwords so that's no good either. In the past I've used KNOPPIX and the old LinuxCare "bootable business card" to recover NT passwords. I've never done this with MS Windows Vista. So, I'm looking for the best advice on how to do this. Naturally I do have physical access to the systems (the two laptops are charging across the room from me; and her old desktop systems are, naturally, still back at his place). Getting it right is much more important than fast or easy (I don't want to mess up those filesystems and possibly lose some photos or other stuff that he or his kids or grandkids will want). (BTW: if anyone things this is some social engineering hack to play upon the sympathies of the community to get the information I'm asking for ... think about it for a minute. I know about IRC and the "warez" boards. I know I can find this stuff out there if I dig enough. I'm just asking here because it'll hopefully be faster and, secondarily to raise awareness. As more of us put more of our lives online ... as we get older and as places like FaceBook continue to widen the appeal of computing to a broader segment of older people ... we are, as computer nerds, going to see a lot more of this. Survivors will needs us to be careful, sensitive and ethically responsible as they try to recover those bits of legacy during their bereavement. I can now tell you, first hand, it sucks!)

    Read the article

  • Some domain names not resolving on local network

    - by Solignis
    I am not really sure where to start with this one... I have a small network setup with some linux servers (Ubuntu 11.04 Server). 2 servers are running BIND 9 (NS01, NS02), they are configured as master and slave respectively. 1 server is running Zimbra ZCS 7.1.1 (MX01), it has a private BIND 9 server running to achieve a split DNS configuration. This DNS server does not interact with the other two, it forwards queries it can resolve to the other 2 that is it. No zone transfers. Zimbra is hosting 3 domains at the moment, solignis.local, solignis.com, campbellsurvey.net. The problem From with in my network I cannot connect to mail.campbellsurvey.net. When I mean I cannot connect, I mean if I open firefox and type https://mail.campbellsurvey.net I go nowhere, the address is supposed to connect to my Zimbra webmail. But it goes nowhere, the odd thing is if I try the same task from outside of the network it brings the website up like normal. If I try to create an account in thunderbird to connect to the same server using IMAP4 or POP3 I get an error saying that thunderbird cannot find the domain name. Even the zimbra client fails too. It is like from with in my own walls that campbellsurvey.net does not exist. But if step outside I can get it work with no problem at all. I had thought maybe the problem was with the DNS server (BIND 9), so just to eliminate it as a possibility I configured a windows server I use for VMware VCenter as a DNS server to see what would happen. The result was the same, its like something is preventing connections to those domains, but I have checked various firewalls and such. I checked port forwards, etc. So I am running out of ideas I know this is not a lot of information to work from and I can give more details about certain things as needed. I am just trying to figure out what could be going wrong. Any help you could offer would be much appreciated.

    Read the article

  • Reliable access to Internet but not local network (not DNS or proxy issues)

    - by Ian Goldby
    I'm looking for help with a Vista Home Premium laptop that has trouble accessing any resource on our home network, but accesses the Internet just fine. The set-up is this: The Vista laptop and a MacBook Pro connect wirelessly to the router-modem. A Synology DS212j NAS drive has a wired connection to the router-modem. Devices on the local network are always referred to by IP address, so this cannot be a DNS issue. The MacBook Pro connects reliably to the NA via AFP (network shared folders), SMB (network shared folders) and HTTP. The Vista laptop connects to and browses sites on the Internet without any problems. It can log into the NAS via SMB and list the shared folders (so there is nothing wrong with the log-in credentials), but when it tries to open any of the folders Explorer just hangs with the spinning cursor for several minutes and then says "\192.168.1.64\shared\Photos is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The specified network name is no longer available." It can ping the NAS successfully. If I try to open the NAS drive's web interface, the browser just hangs. This is the same with IE, Firefox and Chrome. (There is no proxy.) I can log into the NAS drive with FTP and navigate directories, but when I try to list the contents of a directory with more than a handful of entries, the ftp client hangs. I set up a website on the MacBook. The Vista laptop was able to load some of the pages, but loading any of the images was very hit and miss. Images embedded in HTML pages never worked no matter how many times I reloaded the page, but when I linked directly to the image it did load (though several attempts were sometimes needed). I tried all of this with the Windows Firewall turned off, and with AVG turned off. That made no difference. I'd really appreciate any suggestions anyone can make. The fact that the Vista laptop has trouble with HTTP and FTP as well as SMB connections suggests to me that this is a problem at the TCP level or below. But don't forget it accesses sites outside the LAN with no problems.

    Read the article

  • Capistrano asks for SSH password when deploying from local machine to server

    - by GhostRider
    When I try to ssh to a server, I'm able to do it as my id_rsa.pub key is added to the authorized keys in the server. Now when I try to deploy my code via Capistrano to the server from my local project folder, the server asks for a password. I'm unable to understand what could be the issue if I'm able to ssh and unable to deploy to the same server. $ cap deploy:setup "no seed data" triggering start callbacks for `deploy:setup' * 13:42:18 == Currently executing `multistage:ensure' *** Defaulting to `development' * 13:42:18 == Currently executing `development' * 13:42:18 == Currently executing `deploy:setup' triggering before callbacks for `deploy:setup' * 13:42:18 == Currently executing `db:configure_mongoid' * executing "mkdir -p /home/deploy/apps/development/flyingbird/shared/config" servers: ["dev1.noob.com", "176.9.24.217"] Password: Cap script: # gem install capistrano capistrano-ext capistrano_colors begin; require 'capistrano_colors'; rescue LoadError; end require "bundler/capistrano" # RVM bootstrap # $:.unshift(File.expand_path('./lib', ENV['rvm_path'])) require 'rvm/capistrano' set :rvm_ruby_string, 'ruby-1.9.2-p290' set :rvm_type, :user # or :user # Application setup default_run_options[:pty] = true # allow pseudo-terminals ssh_options[:forward_agent] = true # forward SSH keys (this will use your SSH key to get the code from git repository) ssh_options[:port] = 22 set :ip, "dev1.noob.com" set :application, "flyingbird" set :repository, "repo-path" set :scm, :git set :branch, fetch(:branch, "master") set :deploy_via, :remote_cache set :rails_env, "production" set :use_sudo, false set :scm_username, "user" set :user, "user1" set(:database_username) { application } set(:production_database) { application + "_production" } set(:staging_database) { application + "_staging" } set(:development_database) { application + "_development" } role :web, ip # Your HTTP server, Apache/etc role :app, ip # This may be the same as your `Web` server role :db, ip, :primary => true # This is where Rails migrations will run # Use multi-staging require "capistrano/ext/multistage" set :stages, ["development", "staging", "production"] set :default_stage, rails_env before "deploy:setup", "db:configure_mongoid" # Uncomment if you use any of these databases after "deploy:update_code", "db:symlink_mongoid" after "deploy:update_code", "uploads:configure_shared" after "uploads:configure_shared", "uploads:symlink" after 'deploy:update_code', 'bundler:symlink_bundled_gems' after 'deploy:update_code', 'bundler:install' after "deploy:update_code", "rvm:trust_rvmrc" # Use this to update crontab if you use 'whenever' gem # after "deploy:symlink", "deploy:update_crontab" if ARGV.include?("seed_data") after "deploy", "db:seed" else p "no seed data" end #Custom tasks to handle resque and redis restart before "deploy", "deploy:stop_workers" after "deploy", "deploy:restart_redis" after "deploy", "deploy:start_workers" after "deploy", "deploy:cleanup" 'Create symlink for public uploads' namespace :uploads do task :symlink do run <<-CMD rm -rf #{release_path}/public/uploads && mkdir -p #{release_path}/public && ln -nfs #{shared_path}/public/uploads #{release_path}/public/uploads CMD end task :configure_shared do run "mkdir -p #{shared_path}/public" run "mkdir -p #{shared_path}/public/uploads" end end namespace :rvm do desc 'Trust rvmrc file' task :trust_rvmrc do run "rvm rvmrc trust #{current_release}" end end namespace :db do desc "Create mongoid.yml in shared path" task :configure_mongoid do db_config = <<-EOF defaults: &defaults host: localhost production: <<: *defaults database: #{production_database} staging: <<: *defaults database: #{staging_database} EOF run "mkdir -p #{shared_path}/config" put db_config, "#{shared_path}/config/mongoid.yml" end desc "Make symlink for mongoid.yml" task :symlink_mongoid do run "ln -nfs #{shared_path}/config/mongoid.yml #{release_path}/config/mongoid.yml" end desc "Fill the database with seed data" task :seed do run "cd #{current_path}; RAILS_ENV=#{default_stage} bundle exec rake db:seed" end end namespace :bundler do desc "Symlink bundled gems on each release" task :symlink_bundled_gems, :roles => :app do run "mkdir -p #{shared_path}/bundled_gems" run "ln -nfs #{shared_path}/bundled_gems #{release_path}/vendor/bundle" end desc "Install bundled gems " task :install, :roles => :app do run "cd #{release_path} && bundle install --deployment" end end namespace :deploy do task :start, :roles => :app do run "touch #{current_path}/tmp/restart.txt" end desc "Restart the app" task :restart, :roles => :app do run "touch #{current_path}/tmp/restart.txt" end desc "Start the workers" task :stop_workers do run "cd #{current_path}; RAILS_ENV=#{default_stage} bundle exec rake resque:stop_workers" end desc "Restart Redis server" task :restart_redis do "/etc/init.d/redis-server restart" end desc "Start the workers" task :start_workers do run "cd #{current_path}; RAILS_ENV=#{default_stage} bundle exec rake resque:start_workers" end end

    Read the article

  • IIS7 web farm - local or shared content?

    - by rbeier
    We're setting up an IIS7 web farm with two servers. Should each server have its own local copy of the content, or should they pull content directly from a UNC share? What are the pros and cons of each approach? We currently have a single live server WEB1, with content stored locally on a separate partition. A job periodically syncs WEB1 to a standby server WEB2, using robocopy for content and msdeploy for config. If WEB1 goes down, Nagios notifies us, and we manually run a script to move the IP addresses to WEB2's network interface. Both servers are actually VMs running on separate VMWare ESX 4 hosts. The servers are domain-joined. We have around 50-60 live sites on WEB1 - mostly ASP.NET, with a few that are just static HTML. Most are low-traffic "microsites". A few have moderate traffic, but none are massive. We'd like to change this so both WEB1 and WEB2 are actively serving content. This is mainly for reliability - if WEB1 goes down, we don't want to have to manually intervene to fail things over. Spreading the load is also nice, but the load is not high enough right now for us to need this. We're planning to configure our firewall to balance traffic across the two servers. It will detect when a server goes down and will send all the traffic to the remaining live server. We're planning to use sticky sessions for now... eventually we may move to SQL Server session state and stateless load balancing. But we need a way for the servers to share content. We were originally planning to move all the content to a UNC share. Our storage provider says they can set up a highly available SMB share for us. So if we go the UNC route, the storage shouldn't be a single point of failure. But we're wondering about the downsides to this approach: We'll need to change the physical paths for each site and virtual directory. There are also some projects that have absolute paths in their web.config files - we'll have to update those as well. We'll need to create a domain user for the web servers to access the share, and grant that user appropriate permissions. I haven't looked into this yet - I'm not sure if the application pool identity needs to be changed to this user, or if there's another way to tell IIS to use this account when connecting to the share. Sites will no longer be able to access their content if there's ever an Active Directory problem. In general, it just seems a lot more complicated, with more moving parts that could break. Our storage provider would create a volume for us on their redundant SAN. If I understand correctly, this SAN volume would be mounted on a VM running in their redundant VMWare environment; this VM would then expose the SMB share to our web servers. On the other hand, a benefit of the shared content approach is that we'd only need to deploy code to one place, and there would never be a temporary inconsistency between multiple copies of the content. This thread is pretty interesting, though some of these people are working at a much larger scale. I've just been discussing content so far, but we also need to think about configuration. I don't know if we can just use DFS replication for the applicationHost.config and other files, or if it's best to use the shared configuration feature with the config on a UNC share. What do you think? Thanks for your help, Richard

    Read the article

  • Local DNS server (bind) and the router DHCP

    - by Luca
    I just set up an internal http server for internal use (I set up Redmine), in a small network (30 or so PCs). I set up the http server on a virtual box ubuntu, that runs also the DNS server (bind). In the DNS lookup I added the Redmine server name (redmine.engserver <- 192.168.1.14) and as forwarders the outside ISP DNS IP adresses. I am using a small wi-fi router (ASUS RT-N66U) as DHCP (and as gateway). In the DHCP config page I set up as DNS the ubuntu server IP (it is fixed 192.168.1.14). Now when I connect a new PC to the network, the DHCP router issues its new IP and as DNS servers it issues: primary: 192.168.1.14 (ubuntu machine) and seconary 192.168.1.1 (the router itself). ipconfig /all Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DHCPv6 IAID . . . . . . . . . . . : 248539109 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-15-AA-3F-D0-67-E5-49-A7-EF DNS Servers . . . . . . . . . . . : 192.168.1.14 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Before changing the DHCP setting on the router, I would always get only one DNS server: 192.168.1.1 (which uses probably DNS forwarding to external public DNS services). The problem is this: If in my browser I type www.google.com, it works all the time. If in the browser I type http://redmine.engserver/ it works most of the time, but sometimes it ends up with a yahoo page search or something else. In the DNS cache it shows as (Server not found). ipconfig /displaydns I looked with wireshark and it seems like sometimes the client PC interrogates the secondary DNS (192.168.1.1) instead of the first 192.168.1.14. Obviously this one is a public domain and it does not have the redmine.engserver entry. What is wrong in this configuration? Is it even legitimate to have 2 DNS (one internal and one forwarded by the router) which are inconsistent? Is there another way to have a local name service in a small office network? Why is the router DHCP issuing itself as DNS?

    Read the article

  • ASA 5505 stops local internet when connected to VPN

    - by g18c
    Hi I have a Cisco ASA router running firmware 8.2(5) which hosts an internal LAN on 192.168.30.0/24. I have used the VPN Wizard to setup L2TP access and I can connect in fine from a Windows box and can ping hosts behind the VPN router. However, when connected to the VPN I can no longer ping out to my internet or browse web pages. I would like to be able to access the VPN, and also browse the internet at the same time - I understand this is called split tunneling (have ticked the setting in the wizard but to no effect) and if so how do I do this? Alternatively, if split tunneling is a pain to setup, then making the connected VPN client have internet access from the ASA WAN IP would be OK. Thanks, Chris names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.30.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address 208.74.158.58 255.255.255.252 ! ftp mode passive access-list inside_nat0_outbound extended permit ip any 10.10.10.0 255.255.255.128 access-list inside_nat0_outbound extended permit ip 192.168.30.0 255.255.255.0 192.168.30.192 255.255.255.192 access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.30.0 255.255.255.0 access-list DefaultRAGroup_splitTunnelAcl_1 standard permit 192.168.30.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool LANVPNPOOL 192.168.30.220-192.168.30.249 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 192.168.30.0 255.255.255.0 route outside 0.0.0.0 0.0.0.0 208.74.158.57 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.30.0 255.255.255.0 inside snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 TRANS_ESP_3DES_SHA crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.30.3 vpn-tunnel-protocol l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value DefaultRAGroup_splitTunnelAcl_1 username user password Cj7W5X7wERleAewO8ENYtg== nt-encrypted privilege 0 tunnel-group DefaultRAGroup general-attributes address-pool LANVPNPOOL default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global prompt hostname context : end

    Read the article

  • Mac OS X roaming profile from Samba with OpenLDAP backend on Ubuntu 11.10

    - by Sam Hammamy
    I have been battling for a week now to get my Mac (Mountain Lion) to authenticate on my home network's OpenLDAP and Samba. From several sources, like the Ubuntu community docs, and other blogs, and after a hell of a lot of trial and error and piecing things together, I have created a samba.ldif that will pass the smbldap-populate when combined with apple.ldif and I have a fully functional OpenLDAP server and a Samba PDC that uses LDAP to authenticate the OS X Machine. The problem is that when I login, the home directory is not created or pulled from the server. I get the following in system.log Sep 21 06:09:15 Sams-MacBook-Pro.local SecurityAgent[265]: User info context values set for sam Sep 21 06:09:15 Sams-MacBook-Pro.local authorizationhost[270]: in pam_sm_authenticate(): Got user: sam Sep 21 06:09:15 Sams-MacBook-Pro.local authorizationhost[270]: in pam_sm_authenticate(): Got ruser: (null) Sep 21 06:09:15 Sams-MacBook-Pro.local authorizationhost[270]: in pam_sm_authenticate(): Got service: authorization Sep 21 06:09:15 Sams-MacBook-Pro.local authorizationhost[270]: in od_principal_for_user(): no authauth availale for user. Sep 21 06:09:15 Sams-MacBook-Pro.local authorizationhost[270]: in od_principal_for_user(): failed: 7 Sep 21 06:09:15 Sams-MacBook-Pro.local authorizationhost[270]: in pam_sm_authenticate(): Failed to determine Kerberos principal name. Sep 21 06:09:15 Sams-MacBook-Pro.local authorizationhost[270]: in pam_sm_authenticate(): Done cleanup3 Sep 21 06:09:15 Sams-MacBook-Pro.local authorizationhost[270]: in pam_sm_authenticate(): Kerberos 5 refuses you Sep 21 06:09:15 Sams-MacBook-Pro.local authorizationhost[270]: in pam_sm_authenticate(): pam_sm_authenticate: ntlm Sep 21 06:09:15 Sams-MacBook-Pro.local authorizationhost[270]: in pam_sm_acct_mgmt(): OpenDirectory - Membership cache TTL set to 1800. Sep 21 06:09:15 Sams-MacBook-Pro.local authorizationhost[270]: in od_record_check_pwpolicy(): retval: 0 Sep 21 06:09:15 Sams-MacBook-Pro.local authorizationhost[270]: in pam_sm_setcred(): Establishing credentials Sep 21 06:09:15 Sams-MacBook-Pro.local authorizationhost[270]: in pam_sm_setcred(): Got user: sam Sep 21 06:09:15 Sams-MacBook-Pro.local authorizationhost[270]: in pam_sm_setcred(): Context initialised Sep 21 06:09:15 Sams-MacBook-Pro.local authorizationhost[270]: in pam_sm_setcred(): pam_sm_setcred: ntlm user sam doesn't have auth authority All that's great and good and I authenticate. Then I get CFPreferences: user home directory for user kCFPreferencesCurrentUser at /Network/Servers/172.17.148.186/home/sam is unavailable. User domains will be volatile. Failed looking up user domain root; url='file://localhost/Network/Servers/172.17.148.186/home/sam/' path=/Network/Servers/172.17.148.186/home/sam/ err=-43 uid=9000 euid=9000 If you're wondering where /Network/Servers/IP/home/sam comes from, it's from a couple of blogs that said the OpenLDAP attribute apple-user-homeDirectory should have that value and the NFSHomeDirectory on the mac should point to apple-user-homeDirectory I also set the attr apple-user-homeurl to <home_dir><url>smb://172.17.148.186/sam/</url><path></path></home_dir> which I found on this forum. Any help is appreciated, because I'm banging my head against the wall at this point. By the way, I intend to create a blog on my vps just for this, and create an install script in python that people can download so no one has to go through what I've had to go through this week :) After some sleep I am going to try to login from a windows machine and report back here. Thanks Sam

    Read the article

  • XenServer 5.5 local storage problem

    - by Jason Nerer
    Hi community, I have the following problem with a Citrix XenServer 5.5. I had to physically move the host, so I shut down all machines via console: xe vm-shutdown force=true vm=my-machine-uuis-s After that I shut down the machine itself by issuing: halt After the reboot today the local storage repository is unplugged. I was trying to repair it via XenCenter, but I don't trust this one. So I tried: [root@xenserver ~]# xe pbd-list uuid ( RO) : ef6e2f3b-5825-393c-23e1-391d105c87ec host-uuid ( RO): c4bcf09c-2e52-448f-8210-df5d13bd33a9 sr-uuid ( RO): 2fb3be9c-075c-53ed-acb6-42f0c4ad0614 device-config (MRO): device: /dev/disk/by-id/scsi-SATA_WDC_WD5001ABYS-_WD-WCAS83698154,/dev/disk/by-id/scsi-SATA_WDC_WD5001ABYS-_WD-WCAS83694262 currently-attached ( RO): false To reattach the storage I issued: xe pbd-plug uuid=ef6e2f3b-5825-393c-23e1-391d105c87ec That one is running now for a while but not talking to me. The local repo has around 1TB. Should I wait, or are there any other options to reattach the local repo? What could have caused this problem? Any ideas? Thx. J

    Read the article

  • Google Search api for Android systems

    - by jrharshath
    Hi, I'm trying to build an android app that would do a local search on google. I know there is a Google Search API for Java, and I am able to use it for a desktop application. However, when I use the same jar file (gsearch.jar) in my android project, Some problems arise. When I call the .localSearch() method of my gsearch.Client object, a runtime error is occurring. The error message is: "java.lang.VerifyError: gsearch.Client". This message is occurring in the Dalvik Debug Monitor log. So what is the problem here? Can I not use the search API on the android? More importantly, how do I do a local search from an android app? Does the android sdk have search APIs inbuilt? I could only find the Maps api, and Map search is not what I'm looking for.. Thanks for the help, jrh

    Read the article

  • express+jade: provided local variable is undefined in view (node.js + express + jade)

    - by Jake
    Hello. I'm implementing a webapp using node.js and express, using the jade template engine. Templates render fine, and can access helpers and dynamic helpers, but not local variables other than the "body" local variable, which is provided by express and is available and defined in my layout.jade. This is some of the code: app.set ('view engine', 'jade'); app.get ("/test", function (req, res) { res.render ('test', { locals: { name: "jake" } }); }); and this is test.jade: p hello =name when I remove the second line (referencing name), the template renders correctly, showing the word "hello" in the web page. When I include the =name, it throws a ReferenceError: 500 ReferenceError: Jade:2 NaN. 'p hello' NaN. '=name' name is not defined NaN. 'p hello' NaN. '=name' I believe I'm following the jade and express examples exactly with respect to local variables. Am I doing something wrong, or could this be a bug in express or jade?

    Read the article

  • Excluding child processes from ps

    - by stefpet
    Background: To reload app configuration I need to kill -HUP the parent processes' PIDs. To find PIDs I currently use ps auxf | grep gunicorn with the following example output: $ ps auxf | grep gunicorn stpe 4222 0.0 0.2 64524 11668 pts/2 S+ 11:01 0:00 | \_ /usr/bin/python /usr/local/bin/gunicorn app_api:app -c app_api.ini.py stpe 4225 0.0 0.4 76920 16332 pts/2 S+ 11:01 0:00 | \_ /usr/bin/python /usr/local/bin/gunicorn app_api:app -c app_api.ini.py stpe 4226 0.0 0.4 76932 16340 pts/2 S+ 11:01 0:00 | \_ /usr/bin/python /usr/local/bin/gunicorn app_api:app -c app_api.ini.py stpe 4227 0.0 0.4 76940 16344 pts/2 S+ 11:01 0:00 | \_ /usr/bin/python /usr/local/bin/gunicorn app_api:app -c app_api.ini.py stpe 4228 0.0 0.4 76948 16344 pts/2 S+ 11:01 0:00 | \_ /usr/bin/python /usr/local/bin/gunicorn app_api:app -c app_api.ini.py stpe 4229 0.0 0.4 76960 16356 pts/2 S+ 11:01 0:00 | \_ /usr/bin/python /usr/local/bin/gunicorn app_api:app -c app_api.ini.py stpe 4230 0.0 0.4 76972 16368 pts/2 S+ 11:01 0:00 | \_ /usr/bin/python /usr/local/bin/gunicorn app_api:app -c app_api.ini.py stpe 4231 0.0 0.4 78856 18644 pts/2 S+ 11:01 0:00 | \_ /usr/bin/python /usr/local/bin/gunicorn app_api:app -c app_api.ini.py stpe 4232 0.0 0.4 76992 16376 pts/2 S+ 11:01 0:00 | \_ /usr/bin/python /usr/local/bin/gunicorn app_api:app -c app_api.ini.py stpe 5685 0.0 0.0 22076 908 pts/1 S+ 11:50 0:00 | \_ grep --color=auto gunicorn stpe 5012 0.0 0.2 64512 11656 pts/3 S+ 11:22 0:00 \_ /usr/bin/python /usr/local/bin/gunicorn app_game_api:app -c app_game_api.ini.py stpe 5021 0.0 0.4 77656 17156 pts/3 S+ 11:22 0:00 \_ /usr/bin/python /usr/local/bin/gunicorn app_game_api:app -c app_game_api.ini.py stpe 5022 0.0 0.4 77664 17156 pts/3 S+ 11:22 0:00 \_ /usr/bin/python /usr/local/bin/gunicorn app_game_api:app -c app_game_api.ini.py stpe 5023 0.0 0.4 77672 17164 pts/3 S+ 11:22 0:00 \_ /usr/bin/python /usr/local/bin/gunicorn app_game_api:app -c app_game_api.ini.py stpe 5024 0.0 0.4 77684 17196 pts/3 S+ 11:22 0:00 \_ /usr/bin/python /usr/local/bin/gunicorn app_game_api:app -c app_game_api.ini.py stpe 5025 0.0 0.4 77692 17200 pts/3 S+ 11:22 0:00 \_ /usr/bin/python /usr/local/bin/gunicorn app_game_api:app -c app_game_api.ini.py stpe 5026 0.0 0.4 77700 17208 pts/3 S+ 11:22 0:00 \_ /usr/bin/python /usr/local/bin/gunicorn app_game_api:app -c app_game_api.ini.py stpe 5027 0.0 0.4 77712 17220 pts/3 S+ 11:22 0:00 \_ /usr/bin/python /usr/local/bin/gunicorn app_game_api:app -c app_game_api.ini.py stpe 5028 0.0 0.4 77720 17220 pts/3 S+ 11:22 0:00 \_ /usr/bin/python /usr/local/bin/gunicorn app_game_api:app -c app_game_api.ini.py Based on the above I see that it is 4222 and 5012 I need to HUP. Question: How can I exclude the child processes and only get the parent process (please note however that the processes I want do also have a parent (e.g. bash) that I'm uninterested with)? Using a regexp with grep on how much indentation there is in the ascii tree feels dirty. Is there a better way? Example: The desired output would be something like this. stpe 4222 0.0 0.2 64524 11668 pts/2 S+ 11:01 0:00 | \_ /usr/bin/python /usr/local/bin/gunicorn app_api:app -c app_api.ini.py stpe 5012 0.0 0.2 64512 11656 pts/3 S+ 11:22 0:00 \_ /usr/bin/python /usr/local/bin/gunicorn app_game_api:app -c app_game_api.ini.py This would be easily parseable to be able to automatically find the PIDs in a script that does the HUPing which is the goal.

    Read the article

  • LocalStorage storing multiple div hides

    - by Jesse Toxik
    I am using a simple code to hide multiple divs if the link to hide them is clicked. On one of them I have local storage set-up to remember of the div is hidden or not. The thing is this. How can I write a code to make local storage remember the hidden state of multiple divs WITHOUT having to put localstorage.setItem for each individual div. Is it possible to store an array with the div ids and their display set to true or false to decide if the page should show them or not? **********EDITED************ function ShowHide(id) { if(document.getElementById(id).style.display = '') { document.getElementById(id).style.display = 'none'; } else if (document.getElementById(id).style.display = 'none') { document.getElementById(id).style.display = ''; }

    Read the article

  • Thread-safe initialization of function-local static const objects

    - by sbi
    This question made me question a practice I had been following for years. For thread-safe initialization of function-local static const objects I protect the actual construction of the object, but not the initialization of the function-local reference referring to it. Something like this: namspace { const some_type& create_const_thingy() { lock my_lock(some_mutex); static const some_type the_const_thingy; return the_const_thingy; } } void use_const_thingy() { static const some_type& the_const_thingy = create_const_thingy(); // use the_const_thingy } The idea is that locking takes time, and if the reference is overwritten by several threads, it won't matter. I'd be interested if this is safe enough in practice? safe according to The Rules? (I know, the current standard doesn't even know what "concurrency" is, but what about trampling over an already initialized reference? And do other standards, like POSIX, have something to say that's relevant to this?) For the inquiring minds: Many such function-local static const objects I used are maps which are initialized from const arrays upon first use and used for lookup. For example, I have a few XML parsers where tag name strings are mapped to enum values, so I could later switch over the tags enum values.

    Read the article

  • How can I display locally stored images on an internet website?

    - by ropstah
    Hi, i would like to display images on my website that are stored on a visitors local filesystem. Assuming I have the location of the image on the visitors drive (e.g. c:\Documents And Settings\Ropstah\image.png), is it then possible for me to display this image in my internet website (e.g. www.website.com)? The images won't seem to load when i use the following syntax (Internet Explorer 7, Firefox 3 etc..): <img src="file://c:\Documents and Settings\Ropstah\image.png" /> The images DO display if the .html file (which i use on website.com/index.html) is located on my local pc...

    Read the article

  • Mercurial central server file discrepancy (using 'diff to local')

    - by David Montgomery
    Newbie alert! OK, I have a working central Mercurial repository that I've been working with for several weeks. Everything has been great until I hit a really bizarre problem: my central server doesn't seem to be synced to itself? I only have one file that seems to be out-of-sync right now, but I really need to know how this happened to prevent it from happening in the future. Scenario: 1) created Mercurial repository on server using an existing project directory. The directory contained the file 'mypage.aspx'. 2) On my workstation, I cloned the central repository 3) I made an edit to mypage.aspx 4) hg commit, then hg push from my workstation to the central server 5) now if I look at mypage.aspx on the server's repository using TortoiseHg's repository explorer, I see the change history for mypage.aspx -- an initial check-in and one edit. However, when I select 'Diff to local', it shows the current version on the server's disk is the original version, not the edited version! I have not experimented with branching at all yet, so I'm sure I'm not getting a branch problem. 'hg status' on the server or client returns no pending changes. If I create a clone of the server's repository to a new location, I see the same change history as I would expect, but the file on disk doesn't contain my edit. So, to recap: Central repository = original file, but shows change in revision history (bad) Local repository 'A' = updated file, shows change in revision history (good) Local repository 'B' = original file, but shows change in revision history (bad) Help please! Thanks, David

    Read the article

  • Unattended Install of SQL Server 2005 Express with LOCAL Server InstanceName

    - by Jeff
    I'm creating an install package using InnoSetup and installing SQL Server 2005 Express. Here's the code below that appears in my RUN section: Filename: "{app}\SQL Server 2005 Express\SQLEXPR.exe" ; Parameters: "-q /norebootchk /qn reboot=ReallySuppress addlocal=all INSTANCENAME=(LOCAL) SCCCHECKLEVEL=IncompatibleComponents:1;MDAC25Version:0 ERRORREPORTING=2 SQLAUTOSTART=1 SAPWD=passwordhere SECURITYMODE=SQL"; WorkingDir: {app}\SQL Server 2005 Express; StatusMsg: Installing Microsoft SQL Server 2005 Express... Please Wait...;Check:SQLVerifyInstall What I'm trying to accomplish is have the SQL Server package install but only have the instance name itself reference the name of the machine name and nothing more. What I'm receiving instead is a named instance instead of local such as MachineName\SQLEXPRESS which is not what I want to receive. I need a local instance instead of a named instance due to the way my code is written to be able to install and talk with the databases in question. I would change it, trust me, were it not the fact that this install package is a replacement to a previous package that used the MSDE installer. I have to be able to support both through code. Any suggestions are welcome but a clear and concise method to get the installer to quietly install using only the machine name is my main goal. Thanks for the help and support!

    Read the article

  • Windows Azure - access webrole local storage from separate workerrole

    - by Brett Smith
    I'm running an application on windows azure, the MVC views need to be dynamic, I started by storing them as records in the database, but am quite keen to move them to a physical location. My concept was to create the physical file via code... which worked great and speeds up the page load dramatically. This was of course before I realised that the files were only available for the duration of the role Next I looked at a start up task to create the files when the role was started - however I then realised that any separate instances weren't going to sync up unless I monitored the database for changes. So I moved from a start up task to a function in the run method of the role that checks the database every 10 minutes to see if changes have occurred. The problem is that this seems to choke up the application (at least in the warm up stage). Ideally I would like to move the run function to it's own worker role that can sit there and push files out to web role instances, but I'm unsure on how I would go about accessing the web roles local storage from the worker role. Can anybody tell me whether this is actually possible? and hopefully point me in the right direction to achieve this? Just to clarify what I'm trying to achieve -View is created in user interface running on web role and stored in database -Separate web role (front end) has clientside application with virtualpath provider pointing Views requests to local storage (localresource) -separate worker role to create View structure and load this into clientside web role local storage

    Read the article

  • Maven. What to do with "homeless" jars?

    - by Jake
    I have some proprietary.jar that I need to include in my project, but I don't wish to install it to the local repository. What I did initially was to put the jar into version control in my project's lib/ folder, and then specify the Maven dependency as: <!-- LOCAL DEPENDENCY --> <dependency> <groupId>topsecret</groupId> <artifactId>proprietary</artifactId> <version>0.0.1</version> <scope>system</scope> <systemPath>${basedir}/lib/java/proprietary.jar</systemPath> </dependency> However, this becomes a big problem when my project becomes someone else's dependency. Maven will not be able to validate this POM because the path is not absolute. What is the best way to overcome this problem?

    Read the article

  • Google AppEngine + Local JUnit Tests + Jersey framework + Embedded Jetty

    - by xamde
    I use Google Appengine for Java (GAE/J). On top, I use the Jersey REST-framework. Now i want to run local JUnit tests. The test sets up the local GAE development environment ( http://code.google.com/appengine/docs/java/tools/localunittesting.html ), launches an embedded Jetty server, and then fires requests to the server via HTTP and checks responses. Unfortunately, the Jersey/Jetty combo spawns new threads. GAE expects only one thread to run. In the end, I end up having either no datstore inside the Jersey-resources or multiple, having different datastore. As a workaround I initialise the GAE local env only once, put it in a static variable and inside the GAE resource I add many checks (This threads has no dev env? Re-use the static one). And these checks should of course only run inside JUnit tests.. (which I asked before: "How can I find out if code is running inside a JUnit test or not?" - I'm not allowed to post the link directly here :-|)

    Read the article

  • SQLServer using too much memory

    - by Israel Pereira Valverde
    I have installed on my desktop machine (with windows 7) SQLServer 2008 R2 Express. I have only one local server running (./SQLEXPRESS) but the sqlserver process is taking ALL the RAM possible. With an machine with 3GB of RAM the things starts to get slow, so I limited the maximun amount of RAM in the server, and now, constantly the SQLServer give some error messages that the memory is not enought. It's using 1GB of RAM with only one LOCAL server with 2 databases completely empty, how 1GB of RAM isn't enought ? When the process start it's using an really acceptable amount of memory (around 80MB) but it's keep increasing until it reaches the maximun defined and start to complain about having not enought memory available. In that point I have to restart the server to use it again. I have read about an hotfix to solve one of the errors I got from sqlserver: There is insufficient system memory in resource pool 'internal' to run this query But it's already installed on my sqlserver. Why it's using so much memory?

    Read the article

  • Problems with video conversions through the web (local host)

    - by ron-d
    Hello, I get the following errors when I attempt video format conversions called from the local host: “An invalid media type was specified” for M4V to WMV conversions. “One or more arguments are invalid” for MP4 to WMV conversions. Here are the details of the problems: I’ve written a dll in C# that accepts videos in the formats AVI, WMV, M4V and MP4 and performs the following actions: Creates a copy of the input video in WMV format . Creates a WAV file of the input video audio portion. Creates a JPG image from a frame of the input video. I attached the dll to an ASP.NET web project that performs the dll actions. When tested through the developer studio, the actions are performed as intended for all formats. When I place the web project in place to be read when the local host is called through the web browser, the following behavior takes place: WMV format: All actions performed as intended. AVI format: Creates WMV file – OK Creates JPG image – OK Creates empty WAV file – problem. M4V format: Creates empty WAV file – problem. Does not create WMV file -problem Does not create JPG file –problem Throws me the error “An invalid media type was specified” MP4 format: Creates empty WAV file – problem. Does not create WMV file -problem Does not create JPG file –problem Throws me the error “One or more arguments are invalid” When I check their security property, all the files have the same permission access parameters (when I check their security property. Can anyone guide me as to how to solve these problems when the web project is called from the local host? Thank you.

    Read the article

  • Linux/Apache performance very slow even on local network

    - by klausch
    I have an Ubuntu server machine running Apache and MYSQL. System and version info is as follows: Linux kernel 3.0.0.-12 Apache/2.2.20 MySQL Ver 14.14.Distrib 5.1.58 I am running a few websites on this server, some HTML only, some PHP/MySQL. THe [problem is that response time is very slow, both on static as well as the dynamic sites. Sometimes it takes more than 10 seconds before a response is given, this makes the sites very slow and almost unusable. The problem occurs even when requesting from the local network. I have added the involved subdomains to my /etc/hosts file, and abolve all the problem is not solved by using IP numbers instead of URL's. So there is no DNS lookup issue. I have modified the log format by showing the response times and sometimes a files takes 12 seconds to be served, see the jquery~.js file in the example screenshot. I have no explanation for this extremely long response time, but is is not even the only issue here, some other files takes a long time to be served too, but do not show a long response time in the log file. So probably different tissues are involved here. I cannot find a solution until now, any suggestions??? THanx in advance, Klaas link to screenshot picture from access logfile Some extra configuration info: apache2.conf (comment is removed) LockFile ${APACHE_LOCK_DIR}/accept.lock PidFile ${APACHE_PID_FILE} Timeout 300 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 5 <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> <IfModule mpm_event_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} AccessFileName .htaccess <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> DefaultType text/plain HostnameLookups Off ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn Include mods-enabled/*.load Include mods-enabled/*.conf Include httpd.conf Include ports.conf LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\" %T/%D" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent Include conf.d/ Include sites-enabled/ And the virtual hostfile for one of the slow sites, in fact it is pretty straightforward... <VirtualHost *:80> ServerAdmin [email protected] ServerSignature EMail ServerName toenjoy.drsklaus.nl DocumentRoot /var/www/toenjoy.drsklaus.nl <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/toenjoy.drsklaus.nl/> Options Indexes FollowSymLinks MultiViews AllowOverride AuthConfig AuthType Basic AuthName "To Enjoy" AuthUserFile /etc/.htpasswd Require user petraaa Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> And the output of free -m: klaas@ubuntu-server:/etc/apache2$ free -m total used free shared buffers cached Mem: 1997 1401 595 0 144 1017 -/+ buffers/cache: 238 1758 Swap: 2035 0 2035 and I have no indication that swapping occurs on the moments the site is slow. I have runned top and it does not appear to be a CPU issue. I have the impression that the spawning of a apache thread could maybe be the bottleneck but it is just a suggestion. Maybe this gives some extra information! EDIT: The problem seemed to be gone for some time but occurs again! And not only with Apache, also connecting using SSH takes a tremendous time, sometimes it takes up to 15 seconds before the keyphrase is asked for. Also scp works very slowly. The behavious is really unpredoctable and makes the server very hard to use. Any ideas...?

    Read the article

  • File URI link to local folder in IE7 not working

    - by Kakmonstret
    No matter what I do I cannot get either of these local File URIs: <a href="file://C:/Folder/">...</a> <a href="file://C|/Folder/">...</a> <a href="C:\">...</a> ... ...to work in IE7 (on Vista). I've tried putting the site in different zones (Local Intranet, Trusted Sites), turning on/off Protected Mode and fiddling with the security settings for the active zone. I've also tried many variations of the URI. But when I click the links, nothing happens. No errors either. Well-formed file URIs to the local file system work in all other browsers I've tried, including IE6 and IE8. I've also gathered from what I've read on the web that this should work. Also, the following JavaScript results in an access-denied error, regardless of zone/settings: <a href="#" onclick="return window.open('C:\\Folder\\');">#</a> Did this stop working in the latest IE7 and/or the latest Vista, or something? And if so, why is it working again in IE8 on Windows 7? Is there a workaround of some kind? (I don't know how to test with IE7 on anything other than Vista.)

    Read the article

  • converting a UTC time to a local time zone in Java

    - by aloo
    I know this subject has been beaten to death but after searching for a few hours to this problem I had to ask. My Problem: do calculations on dates on a server based on the current time zone of a client app (iphone). The client app tells the server, in seconds, how far away its time zone is away from GMT. I would like to then use this information to do computation on dates in the server. The dates on the server are all stored as UTC time. So I would like to get the HOUR of a UTC Date object after it has been converted to this local time zone. My current attempt: int hours = (int) Math.floor(secondsFromGMT / (60.0 * 60.0)); int mins = (int) Math.floor((secondsFromGMT - (hours * 60.0 * 60.0)) / 60.0); String sign = hours > 0 ? "+" : "-"; Calendar now = Calendar.getInstance(); TimeZone t = TimeZone.getTimeZone("GMT" + sign + hours + ":" + mins); now.setTimeZone(t); now.setTime(someDateTimeObject); int hourOfDay = now.get(Calendar.HOUR_OF_DAY); The variables hour and mins represent the hour and mins the local time zone is away from GMT. After debugging this code - the variables hour, mins and sign are correct. The problem is hourOfDay does not return the correct hour - it is returning the hour as of UTC time and not local time. Ideas?

    Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >