Search Results

Search found 5881 results on 236 pages for 'xor power'.

Page 51/236 | < Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >

• Virtual Machine Manager 2012 CPU Average

  - by Grant

  What exactly is the CPU Average field in VMM 2012 showing me? I'm running Server 2008 R2 with VMM 2012. My server has 2x16 core CPUs installed. An example virtual machine has 4 virtual processors, and shows 20% CPU usage. Is that: 20% of the entire system's available CPU power? 20% of 4 of the 32 core's CPU power? 20% of one core's CPU? (in which case it could go as high as 400%) Something else entirely? How can I tell how much of the entire system's CPU power is being used (all 32 cores)? Edit: Well, I can tell for sure it's not 20% of the entire system's CPU power - since the entire server's CPU averages add up to well over 100% right now.

  Read the article

• Server have 2 psu, can i only turn on 1 psu, to reduce cost in colocation?

  - by Earl

  i just got a server & want to colocation it in datacenter server details : HP DL380, 2x intel Xeon (3,06GHz/533, 512KB L2 Cache), 8x Fans, Form Factor Rack (2U), 2x 400W Power Supplies, the server have 2 psu, can i only turn on 1 psu, to reduce cost in colocation? will the server still running good? the standart colocation packages in my city only give default power 400w, if need additional power 400w need additional cost about $40-60 again permonth please give suggestion from your experience

  Read the article

• UPS with a HP Proliant server

  - by Groo

  We placed a EATON Ellipse Max 1500 (900W) as the UPS for our HP Proliant ML350 G6. Upon first power failure (actually we only moved the UPS' input plug to a different socket), server immediatelly turned off, and the Health LED turned red and started blinking. UPS was in operation for about a week before that, with battery fully charged to 100%. Since our server's hot-plug supply is 460W, we are pretty sure we haven't overloaded it, the server was completely idle at that time (no web or win apps running except Windows Server core services). Then we tried to do the same with a different, no-name older PC (Core 2 Duo, 2Gb RAM) with a generic power supply (not sure what the power is) and it continued working when we pulled the plug out. UPS load was less than 15% (measured in the provided Eaton utility). We measured the UPS' output voltage using a smart oscilloscope and the THD of the UPS output waveform turned out to be 40%. Did you have similar experiences? Could this be a faulty UPS? Or a faulty power supply? Or some HP sensors configured to trigger too strictly? I wouldn't like replacing this UPS with the same brand, to get same results. [Edit] I also tried to do this while the server is turned off. While the UPS is working on battery, server will not start - as soon as I press the power button, Health LED starts blinking red.

  Read the article

• When did my Mac's HD last sleep?

  - by flipdoubt

  Is there any app or log that says when my MacBook Pro's hard drive last went into sleep mode? I ask because each night when I close the MBP's lid without being plugged into a power source, the power light goes into its snooze rhythm but the battery is half-drained by the next morning. It certainly looks like it is asleep, but the power drain seems to indicate otherwise.

  Read the article

• difference between StandBy and Hibernate in windowsXp?

  - by androidbase Praveen

  what is the difference between standby and hibernate? when i put my laptop as standby when the power is plugged there is no problem to resume. when the power is unplugged my system will dumped. i want to do illegal shutdown(holding power button) and the switch it on.? why?

  Read the article

• wire colors: color vs black vs white (positive vs negative voltage)

  - by David Oneill

  I'm working on building a computer (first time for me). There are several plugs that I need to connect to the motherboard (Power LED, reset switch, etc). Of the two wires, they are either: Color and white (reset switch, power LED, HDD LED) red and black (speaker, power switch) The manual for the motherboard has a nice diagram of where to plug them in, but has them labeled + or -. Which colors are positive, and which are negative?

  Read the article

• Lenvo B450 won't boot on battery only?

  - by Mywiki Witwiki

  We bought a Lenovo B450 laptop almost a year ago. It comes with a NVIDIA GEFORCE with CUDA graphics and so the battery life is terrible. It will only last 1:30 hours max. We try to run it on battery as much as possible but because the battery life is short sometimes we can't notice that the battery is so low until the computer blacks out. Because of the short battery life, the laptop is always plugged on AC power. One night the computer froze. Because it was already late, I just reset the laptop my pressing the power button for 10 seconds. The laptop shut off but I did not bother restarting it. The next morning, the laptop won't turn on on battery only. It will only turn on on AC power. The computer instantly shuts down(improperly) once the adapter is removed. But the battery was at 100% then. Now it is slowly losing charge (currently at 74%). The battery indicator says, "Plugged in, not charging". I want to bring the laptop to school but I can't because it won't be portable at all. Just to summarize it all: 1) The laptop suffered some blackouts already. 2) The laptop was on AC power most of the time. 3) When the computer froze, it was reset (hard shutdown). 4) The laptop won't boot with battery only since then. 5) The laptop will shutdown instantly when AC adapter is removed. 6) The battery won't charge and is gradually losing charge. ======================= UPDATE ============================= We got the battery replaced. Unfortunately, it delivers only 2 hours max of power.

  Read the article

• Anything such as a usb laptop charger?

  - by iNinja

  I am looking for a laptop charger that requires no power outlet but instead utilizes a usb port of another computer to charge my laptop. That is, I am seeking a usb-to-laptop port charger, NOT power outlet-to-laptop's usb charger. Is such a product even possible? I am guessing no since the usb port would not be able to supply enough electricity to power the laptop, even to maintain the battery (not charge it).

  Read the article

• Can a Windows PC do anything while it is sleeping?

  - by Root

  I heard that OS X Mountain Lion on a Mac has a feature called Power Nap : With Power Nap, your Mac sleeps but your applications stay up to date. So you have the latest information — such as mail, notes, reminders, and messages — when your Mac wakes up. Power Nap performs Time Machine backups to Time Capsule and downloads OS X software updates while your Mac sleeps, so you can begin installing as soon as you wake it up. Can Windows do the same on a PC?

  Read the article

• My linux server takes more than an hour to boot. Suggestions?

  - by jamieb

  I am building a CentOS 5.4 system that boots off a compact flash card using a card reader that emulates an IDE drive. It literally takes about an hour to boot. The ultra-slow part occurs when Grub is loading the kernel. Once that's done, the rest of the boot process only takes about a minute to get to a login prompt. Does anyone have any suggestions? I suspect that it may have to do with UDMA. Everything IDE-related in my BIOS seems to checkout. The read performance hdparm is telling me 1.77 MB/s. Ouch! (But even at that rate, it still shouldn't take an hour to decompress and load the kernel) [root@server ~]# hdparm -tT /dev/hdc /dev/hdc: Timing cached reads: 2444 MB in 2.00 seconds = 1222.04 MB/sec Timing buffered disk reads: 6 MB in 3.39 seconds = 1.77 MB/sec Trying to enable DMA is a no-go though: [root@server ~]# hdparm -d1 /dev/hdc /dev/hdc: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) Here's some command outputs that might help: System [root@server ~]# uname -a Linux server.localdomain 2.6.18-164.el5xen #1 SMP Thu Sep 3 04:47:32 EDT 2009 i686 i686 i386 GNU/Linux PCI info: [root@server ~]# lspci -v 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02) Subsystem: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation 82945G/GZ Integrated Graphics Controller Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at fdf00000 (32-bit, non-prefetchable) [size=512K] I/O ports at ff00 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at fdf80000 (32-bit, non-prefetchable) [size=256K] Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [d0] Power Management version 2 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at fe00 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 Flags: bus master, medium devsel, latency 0, IRQ 17 I/O ports at fd00 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at fc00 [size=32] 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at fb00 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fdd00000 Capabilities: [50] #0d [0000] 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Subsystem: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) (prog-if 80 [Master]) Subsystem: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 17 I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at <unassigned> I/O ports at f800 [size=16] Capabilities: [70] Power Management version 2 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) Subsystem: Intel Corporation 82801G (ICH7 Family) SMBus Controller Flags: medium devsel, IRQ 17 I/O ports at 0500 [size=32] 01:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at de00 [size=256] Memory at fdeff000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 17 I/O ports at dc00 [size=256] Memory at fdefe000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ Flags: bus master, medium devsel, latency 32, IRQ 19 I/O ports at da00 [size=256] Memory at fdefd000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 hdparm ouput: [root@server ~]# hdparm /dev/hdc /dev/hdc: multcount = 0 (off) IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 8146/16/63, sectors = 8211168, start = 0 [root@server ~]# hdparm -I /dev/hdc /dev/hdc: ATA device, with non-removable media Model Number: InnoDisk Corp. - iCF4000 4GB Serial Number: 20091023AACA70000753 Firmware Revision: 081107 Standards: Supported: 5 Likely used: 6 Configuration: Logical max current cylinders 8146 8146 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 8211168 LBA user addressable sectors: 8211168 device size with M = 1024*1024: 4009 MBytes device size with M = 1000*1000: 4204 MBytes (4 GB) Capabilities: LBA, IORDY(can be disabled) Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 2 Current = 2 DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * Power Management feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * CFA feature set * Mandatory FLUSH_CACHE HW reset results: CBLID- above Vih Device num = 0 CFA power mode 1: enabled and required by some commands Maximum current = 100ma Checksum: correct

  Read the article

• Acer LCD says "no signal"

  - by Ken

  I have an Acer 24" LCD (model "AL2423WDR") that's about 3 years old. It worked perfectly for most of its lifetime so far. Recently it started giving problems. When I turn it on, it either says "no signal" on the display, or the power light goes yellow (as if in power-saving mode). This happens with both DVI and VGA (both of which worked fine before), and stranger still, the 4 buttons on the front, for accessing the on-screen menus, don't do anything. I've also tried different computer hardware and software (PC/Mac, Linux/MacOS), but nothing has worked. I've tried power-cycling it (with both the power button and the power switch), and also unplugging it entirely. The nonworking buttons suggest to me an issue with the firmware. I found a place on Acer's website that says I can send it in to have it fixed, at my expense, but I'll avoid that if I can. Is there a way to fully reset it manually? Or is there something else I can try?

  Read the article

• Keyboard lights sometimes stay on after PC is powered off. Why?

  - by Vilx-

  Sometimes when I power off my PC some lights on the keyboard stay on. It's pretty random which ones, though I suspect it has something to do with what lights were on just before the shutdown (if I vigorously follow that they are all off while the PC is shutting down then they stay off). Not that this would change anything, but it is annoying. Why does this happen and how can I avoid it? Added: I know that I can turn off the power completely to my computer and it will go off. That's not the point. Actually, I even want my keyboard to have power, because I use it to turn on my computer (the power button on the case is difficult to reach). I just want the lights to go off. Or at least understand why this happens. Oh, and it's a PS2 keyboard.

  Read the article

• dual boot preinstalled windows 8 laptop with windows 7

  - by sarathi

  I am having a hard disk in gpt partition style and Windows 8 is pre-installed in uefi mode. While trying to dual boot using usb bootable disk(using rufus,gpt partition style,fat32),it displays "Windows is loading files", then while displaying "Starting Windows" it hangs. So, I tried to install it inside Windows using setup.exe. Everything was running fine, but when it gets self restarted again, it got stuck at "Starting Windows". When restarted in Windows 8, it showed a htm file stating that "Windows cannot be installed on a computer using battery power. If the battery runs out of power during the installation, you might lose data. To continue the installation, plug in the computer's power adapter." I am sure that power adapter is connected. I Googled a lot on this, but I didn't get solution.

  Read the article

• Constraint Satisfaction Problem

  - by Carl Smotricz

  I'm struggling my way through Artificial Intelligence: A Modern Approach in order to alleviate my natural stupidity. In trying to solve some of the exercises, I've come up against the "Who Owns the Zebra" problem, Exercise 5.13 in Chapter 5. This has been a topic here on SO but the responses mostly addressed the question "how would you solve this if you had a free choice of problem solving software available?" I accept that Prolog is a very appropriate programming language for this kind of problem, and there are some fine packages available, e.g. in Python as shown by the top-ranked answer and also standalone. Alas, none of this is helping me "tough it out" in a way as outlined by the book. The book appears to suggest building a set of dual or perhaps global constraints, and then implementing some of the algorithms mentioned to find a solution. I'm having a lot of trouble coming up with a set of constraints suitable for modelling the problem. I'm studying this on my own so I don't have access to a professor or TA to get me over the hump - this is where I'm asking for your help. I see little similarity to the examples in the chapter. I was eager to build dual constraints and started out by creating (the logical equivalent of) 25 variables: nationality1, nationality2, nationality3, ... nationality5, pet1, pet2, pet3, ... pet5, drink1 ... drink5 and so on, where the number was indicative of the house's position. This is fine for building the unary constraints, e.g. The Norwegian lives in the first house: nationality1 = { :norway }. But most of the constraints are a combination of two such variables through a common house number, e.g. The Swede has a dog: nationality[n] = { :sweden } AND pet[n] = { :dog } where n can range from 1 to 5, obviously. Or stated another way: nationality1 = { :sweden } AND pet1 = { :dog } XOR nationality2 = { :sweden } AND pet2 = { :dog } XOR nationality3 = { :sweden } AND pet3 = { :dog } XOR nationality4 = { :sweden } AND pet4 = { :dog } XOR nationality5 = { :sweden } AND pet5 = { :dog } ...which has a decidedly different feel to it than the "list of tuples" advocated by the book: ( X1, X2, X3 = { val1, val2, val3 }, { val4, val5, val6 }, ... ) I'm not looking for a solution per se; I'm looking for a start on how to model this problem in a way that's compatible with the book's approach. Any help appreciated.

  Read the article

• Dell XPS 17 Laptop USB SS Ports don't work until machine rebooted

  - by Matt

  I have a new Dell XPS 17 laptop and have an issue that the two USB SS ports on the rear of the machine are not recognising anything when I start-up. Have tried mouse, keyboard, headset, USB display. If I plug a USB hub in the power light on the hub lights (presume this is hard-wired) but a mouse plugged into the hub does not light up. If I restart the pc the ports work fine. Also the other two USB ports work fine all the time. I have switched off the power saving setting on the device manager (Power managementAllow the computer to turn off this device to save power) and also in the advanced power settings (USB Settings USB Selective suspend setting:disabled) I have also disabled USB powershare in the BIOS (not sure what this actually does!) This is becoming very annoying having to restart the machine every day before I can start work Running Win 7 Pro x64 EDIT: I have found that setting USB Emulation to Disabled has helped the devices to be recognised during start up but they keep dropping out completely when in use EDIT 2: I contacted Dell about this issue who told me to update the BIOS driver, when I asked if I should downgrade from the factory installed A13 to the A12 posted on the dell website they said no. However there is now an A14 available on the website has anyone tried this?

  Read the article

• Printf in assembler doesn't print

  - by Gaim

  Hi there, I have got a homework to hack program using buffer overflow ( with disassambling, program was written in C++, I haven't got the source code ). I have already managed it but I have a problem. I have to print some message on the screen, so I found out address of printf function, pushed address of "HACKED" and address of "%s" on the stack ( in this order ) and called that function. Called code passed well but nothing had been printed. I have tried to simulate the environment like in other place in the program but there has to be something wrong. Do you have any idea what I am doing wrong that I have no output, please? Thanks a lot EDIT: This program is running on Windows XP SP3 32b, written in C++, Intel asm there is the "hack" code CPU Disasm Address Hex dump Command Comments 0012F9A3 90 NOP ;hack begins 0012F9A4 90 NOP 0012F9A5 90 NOP 0012F9A6 89E5 MOV EBP,ESP 0012F9A8 83EC 7F SUB ESP,7F ;creating a place for working data 0012F9AB 83EC 7F SUB ESP,7F 0012F9AE 31C0 XOR EAX,EAX 0012F9B0 50 PUSH EAX 0012F9B1 50 PUSH EAX 0012F9B2 50 PUSH EAX 0012F9B3 89E8 MOV EAX,EBP 0012F9B5 83E8 09 SUB EAX,9 0012F9B8 BA 1406EDFF MOV EDX,FFED0614 ;address to jump, it is negative because there mustn't be 00 bytes 0012F9BD F7DA NOT EDX 0012F9BF FFE2 JMP EDX ;I have to jump because there are some values overwritten by the program 0012F9C1 90 NOP 0012F9C2 0090 00000000 ADD BYTE PTR DS:[EAX],DL 0012F9C8 90 NOP 0012F9C9 90 NOP 0012F9CA 90 NOP 0012F9CB 90 NOP 0012F9CC 6C INS BYTE PTR ES:[EDI],DX ; I/O command 0012F9CD 65:6E OUTS DX,BYTE PTR GS:[ESI] ; I/O command 0012F9CF 67:74 68 JE SHORT 0012FA3A ; Superfluous address size prefix 0012F9D2 2069 73 AND BYTE PTR DS:[ECX+73],CH 0012F9D5 203439 AND BYTE PTR DS:[EDI+ECX],DH 0012F9D8 34 2C XOR AL,2C 0012F9DA 2066 69 AND BYTE PTR DS:[ESI+69],AH 0012F9DD 72 73 JB SHORT 0012FA52 0012F9DF 74 20 JE SHORT 0012FA01 0012F9E1 3120 XOR DWORD PTR DS:[EAX],ESP 0012F9E3 6C INS BYTE PTR ES:[EDI],DX ; I/O command 0012F9E4 696E 65 7300909 IMUL EBP,DWORD PTR DS:[ESI+65],-6F6FFF8D 0012F9EB 90 NOP 0012F9EC 90 NOP 0012F9ED 90 NOP 0012F9EE 31DB XOR EBX,EBX ; hack continues 0012F9F0 8818 MOV BYTE PTR DS:[EAX],BL ; writing 00 behind word "HACKED" 0012F9F2 83E8 06 SUB EAX,6 0012F9F5 50 PUSH EAX ; address of "HACKED" 0012F9F6 B8 3B8CBEFF MOV EAX,FFBE8C3B 0012F9FB F7D0 NOT EAX 0012F9FD 50 PUSH EAX ; address of "%s" 0012F9FE B8 FFE4BFFF MOV EAX,FFBFE4FF 0012FA03 F7D0 NOT EAX 0012FA05 FFD0 CALL EAX ;address of printf This code is really ugly because I am new in assembler and there mustn't be null bytes because of buffer-overflow bug

  Read the article

• How to get Windows Server 2008 VM to use multiple cores

  - by David Fraser

  I have a Windows Server 2008 machine running in VirtualBox. On initial installation, only one processor was made available, but now I want to run it as a multiprocessor machine. I have made all four cores available in the VirtualBox settings (as well as enabling VT-x/AMD-V and Nested Paging), but Task Manager still only shows one CPU. However, the four CPU cores are visible in Device Manager under Processors. In the event log on startup, I can see the following relevant events: EventLog.6009 Microsoft (R) Windows (R) 6.00.6002 Service Pack 2 Multiprocessor Free Kernel-Processor-Power.4 Processor 0 exposes the following: 1 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) How can I make this system actually boot up as a multiprocessor machine?

  Read the article

• How to get Windows Server 2008 VM to use multiple cores

  - by David Fraser

  I have a Windows Server 2008 machine running in VirtualBox. On initial installation, only one processor was made available, but now I want to run it as a multiprocessor machine. I have made all four cores available in the VirtualBox settings (as well as enabling VT-x/AMD-V and Nested Paging), but Task Manager still only shows one CPU. However, the four CPU cores are visible in Device Manager under Processors. In the event log on startup, I can see the following relevant events: EventLog.6009 Microsoft (R) Windows (R) 6.00.6002 Service Pack 2 Multiprocessor Free Kernel-Processor-Power.4 Processor 0 exposes the following: 1 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) Kernel-Processor-Power.4 Processor 255 exposes the following: 0 idle state(s), 0 performance state(s), 0 throttle state(s) How can I make this system actually boot up as a multiprocessor machine?

  Read the article

• When machine is turned on, only the fan runs

  - by Gopal

  Hi, I have an issue slightly similar to this one posted here, http://superuser.com/questions/127016/troubleshooting-monitor-never-turns-on-system-fans-running-dvd-rom-does-not-op My configuration is as follows: EPOX 9NPA+ Ultra motherboard AMD Athlon 64 CPU Corsair 2 x 1GB PC3200 DDR RAM 1 DVD RW drive and 1 CD ROM Drive SATA 250 GB Hard drive 400W Power supply EVGA 256MB graphics card I have had this configuration for about four years. Last month, I started having issues in starting the machine. It wouldn't start when I press the ON button in the front of the case. So I used to pull out the power cord and plug it back in and then switch on in the front, and it used to work fine. And then one fine day, when I plugged in the power cord at the back, even without switching on the power-on button at the front, I saw that the fan at the back was running. So I opened the system. Then I could see that all the fans inside were running. I replaced the power supply. No luck there. Then I replaced the CMOS battery. Again nothing improved. Even when I removed all the cards and memory, I still get one short beep. That's it. Any idea how to proceed on this? Anything else could be checked? I want to confirm if this is a motherboard failure, before proceeding to replace it.

  Read the article

• Windows 7 boot problem on a Lenovo Thinkpad Z61m 9450HAG

  - by Matt Taylor

  I recently did a full upgrade of Windows 7 on my Thinkpad. Everything worked fine after up until the second reboot (the first reboot after some updates installed worked OK). At second reboot time the system would just black screen before the Windows logo appears. Disk/wireless/power/battery lights are all lit and the disk light is active (flickering). However, if I remove my battery and boot with just power it boots fine and quickly, and everything is OK. Any help on why this won't boot with battery plugged in is greatly appreciated. I need to take this battery out on the road/trains, etc. A little more detail on this story. The battery I had inserted when doing the (failed) boot was a long life battery. I have not tried inserting this battery when Windows is logged in. I have another (normal life) battery that I have charged up within Windows. It has just got to 100% and I am about to reboot with it in. I am using the Lenovo power manager to diagnose the battery - all seems OK. I will report back shortly as to the outcome. OK, so I chose the reboot option from within Windows, the machine seemed to shutdown okay, but then stalled. It didn't turn off completely and didn't reboot, but just sat, with the fan humming, somewhere in between! I had to hold the power button in for a few seconds until the fan stopped and then hit the power button again to boot the machine from fresh. One good thing, with this battery (the normal one) it booted into Windows 7 the first time with a battery! So, now I have rebooting issues. I have 3 errors in the event log: A timeout was reached (30000 milliseconds) while waiting for the lxdxCATSCustConnectService service to connect. The lxdxCATSCustConnectService service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion. The following boot-start or system-start driver(s) failed to load: cdrom Any thoughts?

  Read the article

• Compaq motherboard CQ60 AMD - nvidia chipsed graphic problem

  - by Dritan

  Hi! It nice to have read that you solved this problem this way. I have 2 laptops Compaq CQ60 AMD Athlon with Nvidia graphic cards. the first one is new, when i press power button, it lights up only the ON led in front and nothing else, no fan working, blank screen, no beep.. I don't know what may be the problem. When I put on power adaptor, it lights up only the side power led near dhe power adapter plug but it doesn't light up the front led one. the second one have this problem that it spins the fan, light power and On led, but it doesn't show nothing on the screen blank (even with external monitor). In this case it maybe this problem of the Nvida Graphic Chip and it may need a reflow. I have an hot air station, but I don't know if I should try this or the oven one. Please can you give me any suggestion what to do to solve this. I have read that the solution of the Oven method is just temporary,maximum of three months, do you have the same experience about this? Any suggestion is wellcome.

  Read the article

• New build won't boot: some fans turning, no beep or video

  - by Dave

  When my new system is powered up, the case fan and power supply fans turn fine. The CPU fan twitches, but never gets going. Although I've heard that with AMDs and Gigabyte motherboards that is not necessary a problem. Hard drive is spinning. However, there is absolutely no indication that anything else is happening. The motherboard, as far as I can tell, does not have an internal speaker, but I harvested one from another machine and plugged it in and still no beeps at all. The monitor screen stays black, on both the integrated VGA and DVI. This is a brand new build, and has never successfully booted. My parts are: AMD Athlon II X2 245 Regor 2.9GHz Socket AM3 65W Dual-Core Processor Model ADX245OCGQBOX - includes CPU cooler) GIGABYTE GA-MA785GPMT-UD2H AM3 AMD 785G HDMI Micro ATX AMD Motherboard - Retail G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL8D-4GBRM - Retail CORSAIR CMPSU-400CX 400W ATX12V V2.2 80 PLUS Certified Compatible with Core i7 Power Supply - Retail SAMSUNG Spinpoint F3 HD502HJ 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive COOLER MASTER Elite 341 RC-341C-KKN1-GP Black Steel MicroATX Mid Tower Computer Case - Retail I also have a DVD burner, but it acts the same whether that is plugged in or not. I'm using the on board video. What I've tried so far: I've switched power supplies, with no difference. I've tried different monitors (of which all are working on other machines) with no difference. I have tried putting it one memory module at a time, with no difference. I have tried the absolute minimum I can think of (power supply into motherboard, power button ONLY plugged into front panel, CPU fan plugged in), with no difference. I appreciate any ideas anyone might have. Do I need to RMA the motherboard? This is my first build, so there might be something obvious. I was very careful in assembly with static; I'm confident nothing was zapped during assembly.

  Read the article

• Windows only successfully wakes up from sleep mode about 2/3rds of the time.

  - by Macha

  On my Vista laptop, when it goes into sleep mode (for low power, or manually being put into sleep mode, it happens regardless of how), about 1 in 3 times it won't wake up properly from sleep mode, and just display a black screen. The only option is to hold the power button to turn it off by holding the power button, and turning it back on again. (And yes, I have moved the mouse, pressed keyboard buttons and stuff).

  Read the article

• XCP vm created via xl create doesn't show up in Xencenter neither in xe vm-list

  - by user138664

  i am running XCP 1.4.90.530.170661 and i have many PV guests running and created via XenCenter. I have created now an openwrt PV guest via the xl create command but it doesn't show up in Xencenter neither in the vm-list command: xe vm-list uuid ( RO) : 6d29aac1-67ff-f83e-4dbc-894a3b6b9c10 name-label ( RW): slitaz power-state ( RO): running uuid ( RO) : 07d96dd1-8223-cd1c-587d-ae37e48d267b name-label ( RW): xen-centos6 power-state ( RO): running uuid ( RO) : 3164bcf1-e43c-badb-e0cf-5423751fffb9 name-label ( RW): xenwin7 power-state ( RO): running uuid ( RO) : 8a31725e-4bcb-48ac-ba7b-e7c1ba310789 name-label ( RW): Control domain on host: xen-mini power-state ( RO): running xl list Name ID Mem VCPUs State Time(s) Domain-0 0 300 2 r----- 4862.5 xenwin7 2 766 1 -b---- 4933.1 slitaz 10 255 1 -b---- 30.8 xen-centos6 11 767 1 -b---- 46.9 openwrt 12 32 1 -b---- 6.8 are these two different kinds of PV vm? if yes, is there a way to export the "xl create" one as xva/ova and import it to show up like the others? Thanks in advance, /c/

  Read the article

• How to get data from a borked Windows Home Server

  - by harhoo

  Yesterday we had a power surge, followed by a power outage. This left my WHS borked: powering on just gives to a flashing blue light (the led on the power supply also flashes green) - no fan or boot activity, nothing. I urgently needed some files off there in the short term (and the 500GB of photos, music, personal video etc in the long term) so I took the hard drive out and put it in my computer. The files and folders showed up, but I couldn't access them - clicking on an image gave an invalid image error in Picasa, I couldn't play MP3s etc. I changed the ownership and permissions of the files, still nothing. I booted in with a LiveCD, the same: files appear, but won't open. Is there anything else I can do? I'm now wondering if it was just the power cable that's broken, but if so, why can;t I access my files from the hard drive? If it is the power cable, and I replace that and the hard drive, will I have done any harm messing around with ownership and file permissions?

  Read the article

< Previous Page | 47 48 49 50 51 52 53 54 55 56 57 58  | Next Page >