Search Results

Search found 16001 results on 641 pages for 'convention over configuration'.

Page 510/641 | < Previous Page | 506 507 508 509 510 511 512 513 514 515 516 517  | Next Page >

• How to subnet hosted VMs

  - by bwizzy

  I have a network of VMs each having a LAN IP address and a public IP address. They each have a 1:1 NAT map for public access via the public IP for HTTP, SSH etc. I'm trying to figure out a way to restrict the LAN IPs from talking to each other, but there are some cases where a group of LAN IPs will need to communicate. I'm using pfSense as a firewall / router on a 192.168.0.0/24 configuration. It seems like I could assign each VM it's own subnet and add a static route to the firewall for that VM to get back to the firewall for internet access / other fw rules. Is that right? I assigned 1 VM with: address 192.168.1.2 netmask 255.255.255.254 gateway 192.168.1.1 Then added a static route on the FW's LAN interface using 192.168.1.0/30 as the destination network and 192.168.1.1 as the gateway. Nothing appears to be working, anyone have any ideas? Please be aware I'm not that familiar with subnets. Thanks!

  Read the article

• How do I solve this error: ssh_exchange_identification: Connection closed by remote host

  - by bernie

  data@server01:~$ ssh [email protected] -vvv OpenSSH_5.5p1 Debian-6, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 10.7.4.1 [10.7.4.1] port 22. debug1: Connection established. debug3: Not a RSA1 key file /home/data/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/data/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-2048 debug1: identity file /home/data/.ssh/id_rsa-cert type -1 debug1: identity file /home/data/.ssh/id_dsa type -1 debug1: identity file /home/data/.ssh/id_dsa-cert type -1 ssh_exchange_identification: Connection closed by remote host

  Read the article

• 1and1 ssh - connection refused

  - by kitensei

  I'm having troubles connecting through SSH to my 1&1 account. When I try to connect with command userXXX@host -p22 -vv I have the following output: OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to mySite.com [ip_here] port 22. debug1: connect to address ip_here port 22: Connection refused Moreover, once I try to connect through SSH and it fails, even the HTTP access is dead, I cannot access the website through explorer anymore :/ please help < I'm running ubuntu 11.10 EDIT: don't know if it can help, here's the .htaccess of the 1and1 server Options +Indexes Satisfy any Order Deny,Allow Allow from 212.227.X.X Deny from all RemoveType .html .gif AuthType Basic AuthName "Access to /logs" AuthUserFile /kunden/homepages/43/d376072470/htpasswd Require user "user_here" and sftp.log: Mar 26 09:21:24 193.251.X USER_HERE Connection from 193.251.X port 51809 Mar 26 09:21:30 193.251.X USER_HERE Failed password for USER_HERE from 193.251.X port 51809 ssh2 Mar 26 09:23:39 193.251.X USER_HERE Failed password for USER_HERE from 193.251.X port 51809 ssh2 Mar 26 09:23:41 193.251.X USER_HERE Failed password for USER_HERE from 193.251.X port 51809 ssh2 Mar 26 09:23:45 193.251.X USER_HERE Failed password for USER_HERE from 193.251.X port 51809 ssh2 Mar 26 09:23:57 193.251.X USER_HERE Failed password for USER_HERE from 193.251.X port 51809 ssh2 Mar 26 10:53:36 212.227.X tmp64459736-3228 Connection from 212.227.X port 23275 Mar 26 10:53:36 212.227.X tmp64459736-3228 Accepted password for tmp64459736-3228 from 212.227.X port 23275 ssh2 Mar 26 11:53:37 212.227.X tmp64459736-3228 Connection closed by 212.227.X Mar 26 18:58:17 212.227.X tmp64459736-5363 Connection from 212.227.X port 23353 Mar 26 18:58:17 212.227.X tmp64459736-5363 Accepted password for tmp64459736-5363 from 212.227.X port 23353 ssh2 Mar 26 19:53:36 212.227.X tmp64459736-8525 Connection from 212.227.X port 5166 Mar 26 19:53:36 212.227.X tmp64459736-8525 Accepted password for tmp64459736-8525 from 212.227.X port 5166 ssh2 Mar 26 19:58:17 212.227.X tmp64459736-5363 Connection closed by 212.227.X

  Read the article

• Some guest networking and VMware Tools functionality broken with Sprint SmartView on the host

  - by Mads

  Using VMware Workstation 6.5.3 on Vista 64-bit. I started having problems with VMware networking about 6 months ago after upgrades to Sprint SmartView. I did not have problems previously, but I don't know if that is because I was lucky. The main symptoms of the problem when SmartView is installed are: I can no longer drag files from the host to copy them to the guest. When they are dragged, the disallowed cursor (the circle with a slash) shows in the guest. If I try to enable shared folders in the guest while it is running, I will not be able to see the shared files and will be informed that networking is not working. I can still ping guests from the host and I can still access network services via NAT most of the time when connected via my USB broadband adapter. When I configure shared folders so they are "always enabled" (with a mapped drive), I can access files on the via the mapped folders. I can also copy the file on the host and then paste it in the guest, as was suggested in some other threads concerning drag-and-drop problems that I found. The VMware Tools icon is showing in all cases and I don't see any obvious errors in the host's event viewer. If I uninstall SmartView, the problems disappear. If SmartView (current version is 2.28.0082) is reinstalled I will experience the same problems. I have tried uninstalling/reinstalling VMware and SmartView in various ways but it appears tha these problems are consistent when SmartView is installed (not just when it is running or connected, but when it is present on the system). I'm wondering if this is a combination of software (WS 6.5.3, Vista64, and SmartView) that works for other people, which would indicate a problem that is peculiar to my configuration.

  Read the article

• Postfix spool on ext3 optimiziations in >=linux-2.6.34 days

  - by Luke404

  Given the very specific nature of the subject (we're not talking about mailboxes, just the spool; we're not talking about other filesystems, just ext3; and so on...) and the maturity of the softwares involved (linux kernel, ext3fs, postfix) I'd think there should be a more or less agreed on set of best practices to filesystem related tuning. I'm trying to get a roundup of them: data=journal became the default in recent kernels (somewhere around 2.6.30 IIRC) so we should be ok with that Wietse Venema says atime must be on, but Postfix documentation recommendsnoatime while talking about the Incoming Queue. Does that mean that postfix needs atime on just for some queue directories and will benefit from noatime on the others? can we use noatime if we just don't use ETRN? filesystem can be mounted nodev,noexec,nosuid - no* won't prevent you from setting attributes (postfix uses exec attr) they just won't have any effect (we don't run anything from the spool) the fsync() issue cited by Wietse and/or the chattr -S are probably linked to sync/async options of ext3fs but I do not understand them enough. Mouting the filesystem with async option is equivalent to chattr -R -S the whole fs? Seems like it will increase performance, but will that pose a risk of "loss of mail after a system crash" or is it really "safe on /var/spool/postfix" ? would you tune anything else on postfix-2.6.x to work better on ext3 or do you leave defaults everywhere? is there a "best" linux I/O scheduler for this kind of workload (namely CFQ or deadline?) or that's something that will vary too much based on hardware configuration? would you tune anything else in the filesystem or in the kernel? anything else? References: Postfix Performance here on SF Postfix documentation about the Incoming Queue Wietse Venema in Best file system on [email protected] here Postfix and ext3 on [email protected] here and there

  Read the article

• Natting trafic from a tunnel to internet

  - by mezgani

  I'm trying to set up a GRE tunnel between a linux box and a router (LAN), and I'm having a few problems which seem to depend to my iptables configuration. Watching with tcpdump on linux box, I can see packets coming with flags GREv0, all i need right know is forwarding this data to internet, found here some trace : iptables -F iptables -X iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT iptables -t nat -F iptables -t nat -X iptables -t nat -P PREROUTING ACCEPT iptables -t nat -P POSTROUTING ACCEPT iptables -t nat -P OUTPUT ACCEPT iptables -t mangle -F iptables -t mangle -X iptables -t mangle -P PREROUTING ACCEPT iptables -t mangle -P OUTPUT ACCEPT iptables -A INPUT -p 47 -j ACCEPT iptables -A FORWARD -i ppp0 -o cloud -j ACCEPT iptables -A FORWARD -i cloud -o ppp0 -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE echo "1" /proc/sys/net/ipv4/ip_forward cloud Link encap:UNSPEC HWaddr C4-CE-7A-2E-F2-BF-DD-C0-00-00-00-00-00-00-00-00 inet adr:10.3.3.3 P-t-P:10.3.3.3 Masque:255.255.255.255 UP POINTOPOINT RUNNING NOARP MTU:1476 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:124 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:0 (0.0 B) TX bytes:10416 (10.1 KiB) Table de routage IP du noyau Destination Passerelle Genmask Indic MSS Fenêtre irtt Iface 196.206.120.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.3.3.0 0.0.0.0 255.255.255.0 U 0 0 0 cloud 0.0.0.0 196.206.120.1 0.0.0.0 UG 0 0 0 ppp0 root@aldebaran:~# ip route 196.206.120.1 dev ppp0 proto kernel scope link src 196.206.122.46 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.18 10.3.3.0/24 dev cloud scope link default via 196.206.120.1 dev ppp0

  Read the article

• Java VM problem in OpenVZ

  - by Ginnun

  Hi, I bought a vps for hosting my java needs. But I can't run java on it. Everything about java is correctly installed but when I try to run java ("java -version" forexample) I get this error : Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. I don't think this is a java centered problem, Out of memory for sure. I contacted the vps admin, but he says everything is fine, you have 2gb ram, expandable to 4gb! I did a bit search on the subject, here is my BEANS file (numbers converted to humanredable form using a script). By the way do JVM heap memory allocs count on kmemsize or privvmpages ? How much ram does that configuration allows me to allocate with jvm for a single process? resource held maxheld barrier limit failcnt kmemsize 2.25 mb 2.35 mb 13.71 mb 14.10 mb 0 lockedpages 0 0 1024.00 kb 1024.00 kb 0 privvmpages 20.54 mb 21.33 mb 256.00 mb 272.00 mb 156 shmpages 5.00 mb 5.00 mb 84.00 mb 84.00 mb 0 numproc 13 14 240 240 0 physpages 9.36 mb 9.45 mb 0 MAX_ULONG 0 vmguarpages 0 0 132.00 mb MAX_ULONG 0 oomguarpages 9.36 mb 9.45 mb MAX_ULONG MAX_ULONG 0 numtcpsock 3 3 360 360 0 numflock 3 3 188 206 0 numpty 2 2 16 16 0 numsiginfo 0 1 256 256 0 tcpsndbuf 69.17 kb 69.17 kb 1.64 mb 2.58 mb 0 tcprcvbuf 48.00 kb 48.00 kb 1.64 mb 2.58 mb 0 othersockbuf 6.80 kb 6.80 kb 1.07 mb 2.00 mb 0 dgramrcvbuf 0.00 kb 0.00 kb 256.00 kb 256.00 kb 0 numothersock 9 10 360 360 0 dcachesize 0.00 kb 0.00 kb 3.25 mb 3.46 mb 0 numfile 704 746 9312 9312 0 numiptent 10 10 128 128 0 Thanks in advance!

  Read the article

• Setting kernel memory for installing postgresql

  - by Matthieu Taymans

  My question is about setting the kernel shared memory for installing postgresql on mac osx 10.6.8. In the readme file of postgresql it is said: Shared Memory PostgreSQL uses shared memory extensively for caching and inter-process communication. Unfortunately, the default configuration of Mac OS X does not allow suitable amounts of shared memory to be created to run the database server. Before running the installation, please ensure that your system is configured to allow the use of larger amounts of shared memory. Note that this does not 'reserve' any memory so it is safe to configure much higher values than you might initially need. You can do this by editting the file /etc/sysctl.conf - e.g. % sudo vi /etc/sysctl.conf On a MacBook Pro with 2GB of RAM, the author's sysctl.conf contains: kern.sysv.shmmax=1610612736 kern.sysv.shmall=393216 kern.sysv.shmmin=1 kern.sysv.shmmni=32 kern.sysv.shmseg=8 kern.maxprocperuid=512 kern.maxproc=2048 Note that (kern.sysv.shmall * 4096) should be greater than or equal to kern.sysv.shmmax. kern.sysv.shmmax must also be a multiple of 4096. Once you have edited (or created) the file, reboot before continuing with the installation. If you wish to check the settings currently being used by the kernel, you can use the sysctl utility: % sysctl -a The database server can now be installed. I'm a real beginner with all this but need to instal postgresql for academic purposes do you know how i can set this kernel shared memory. Won't that be harmful for my system? Thank you in advance. Matthieu

  Read the article

• PHP Output buffer flush issue on Apache/Linux

  - by Iiro Vaahtojärvi

  Hi, I'm running into issues with the PHP output buffer flushing on my Linux web server. The output buffer is maintained correctly and all the right data is pushed to it in my code, but the usual flushing mechanisms won't flush it to the browser. I have tried everything posted here: http://php.net/manual/en/function.flush.php but no success so far. I got a small script from php.net to test it: <?php ob_start(); for($i=0;$i<70;$i++) { echo 'printing...<br />'; ob_get_flush(); flush(); usleep(300000); } ?> This should print "printing..." to the browser 70 times, one line every three seconds. This works fine on my other testing environment which is based on Windows (still using apache, XAMPP package), but on my Linux server it doesn't. It waits for the script to finish before giving anything to the browser, basically ignoring the whole flush command. If anyone has experienced this before or knows of anything that could help (be it server configuration or adjustment to code) it would be greatly appreciated!

  Read the article

• Is it possible to configure simultaneous authentication against 2 different AD domains by IIS 7?

  - by just3ws

  Basically, I need to be able to attempt to authenticate against two different AD domains from IIS. I'd like to be able to automatically query both AD's and whichever comes back with an authentication wins. The users are completely separate and will only exist in their respective domain.         IIS           |           |   /-------------\   |                 |  ------        ------  AD1         AD2  JoeU        AmyU  JillU         JohnU So, if IIS requests to authenticate JoeU it will query both domains. JoeU will be found in AD1 so we can ignore whatever response comes back from AD2. Is this even possible using stock IIS 7? Is there a middleware or something to allow this type of configuration on IIS 7? Would this be a job for some kind of middleware sitting between IIS and the AD domains?

  Read the article

• Logging into Local Statusnet instance on Apache causes browser to download a file

  - by DilbertDave

  I've installed statusnet 0.9.1 on a Windows Server via the WAMP stack and on the whole it seems to be fine. However, when logging in using IE7 or Chrome the browers invoke a file download, i.e. the File Download dialog is displayed. In IE7 the file is called notice with the content below (some parts starred out): <?xml version="1.0" encoding="UTF-8"?> <OpenSearchDescription xmlns="http://a9.com/-/spec/opensearch/1.1/"> <ShortName>Mumble Notice Search</ShortName> <Contact>david.carson@*****.com</Contact> <Url type="text/html" method="get" template="http://voice.*****.com/mumble/search/notice?q={searchTerms}"></Url> <Image height="16" width="16" type="image/vnd.microsoft.icon">http://voice.*****.com/mumble/favicon.ico</Image> <Image height="50" width="50" type="image/png">http://voice.******.com/mumble/theme/cloudy/logo.png</Image> <AdultContent>false</AdultContent> <Language>en_GB</Language> <OutputEncoding>UTF-8</OutputEncoding> <InputEncoding>UTF-8</InputEncoding> </OpenSearchDescription> In Chrome (Linux and Windows!) the file is called people and contains similar XML. This is not an issue when logging in using FireFox. This is obviously a configuration issue but I'm not having much luck tracking it down. I tested the previous version of Statusnet on an Ubuntu Server VM on our network and it worked fine for months. Thanks In Advance

  Read the article

• Conditionally permitting HTTP-only requests to Tomcat?

  - by Mike

  I have 2 versions of a system: Tomcat webserver Nginx reverse-proxy sitting in front of a tomcat webserver. In version 2, nginx only ever talks to Tomcat over HTTP. A user could configure the system so that only HTTPS requests are allowed. If the user does this in Version 1 and then the XML configuration files for Tomcat takes care of this. In version 2, nginx takes care of this. The problem is this: I cannot force a user to update their Tomcat XML config files when they upgrade from version 1 to version 2 (it will be recommended that they do so) because this is done as part of a larger process. This means that if they upgrade and don't update the Tomcat config, an HTTPS request will arrive at nginx, which will proxy it over HTTP to Tomcat which will reject the request because it is not HTTPS. So I can't force an update to the Tomcat XML, and I have to use HTTP between nginx and Tomcat. Any ideas? Is there some way I can affect how Tomcat reads its config in Version 2 so that it ignores the HTTPS-only section?

  Read the article

• Can I disable this Windows (XP) Security Warning?

  - by FumbleFingers

  I recently reformatted my hard drive and reinstalled Windows XP (I know I'll have to take the plunge and commit to Win8 "real soon, now", but I'm just not quite ready for the upheaval yet! :) I used to use WinRar (and later, when I got fed up with the "nag" messages, 7-Zip), but I haven't installed either of them in my new configuration, so I must be using the built-in XP facility when I open *.zip files. For years, I've been opening downloaded *.zip archives, and using "drag & drop" to copy to a File Explorer window open on the folder where I want the files to end up (usually, My Documents\Downloads). But now I find that when I "drop" the file(s), I get a pop-up Windows Security Warning saying Are you sure you want to copy or move files to this folder? You should only move or copy files from locations that you trust Can anyone explain why I'm getting this message, and is there any (reasonably easy, please! :) way to suppress it? Since I've already put the *.zip file on my computer, it seems a bit late to ask if I trust it. (Thus far, the files in question have always been plain text, so it's not a matter of dodgy programs, etc.) Apologies for the low quality image - I don't have the appropriate tools or knowledge to do any better, and it doesn't help that my "PrtScr" screen capture has included what would have been on my second monitor (TV) if it had been turned on. If you can't read it, trust me - I have copied the text verbatim.

  Read the article

• Fixed and dynamic IPs in ISC DHPD lead to double lease

  - by GorillaPatch

  I would like to have a small dynamic adress part and the most clients are assigned a fixed IP adress. My dhcpd.conf looks like this: use-host-decl-names on; authoritative; allow client-updates; ddns-updates on; # Einstellungen fuer DHCP leases default-lease-time 3600; max-lease-time 86400; lease-file-name "/var/lib/dhcpd/dhcpd.leases"; subnet 192.168.11.0 netmask 255.255.255.0 { ddns-updates on; pool { # IP range which will be assigned statically range 192.168.11.1 192.168.11.240; deny all clients; } pool { # small dynamic range range 192.168.11.241 192.168.11.254; # used for temporary devices } } group { host pc1 { hardware ethernet xx:xx:xx:xx:xx:xx; fixed-address 192.168.11.11; } } The motivation for the pool declaration with deny all hosts comes from the ISC DHCPD homepage http://www.isc.org/files/auth.html This will allow hosts to be first added to the network, where they will receive a temporary IP from the 241-254 adress range and then later write an explicit host declaration. Upon next connect it will receive the right configuration. The problem is that I am getting error messages that 192.168.11.13 has a dynamic and a static lease. I am a bit confused as I expected the pool declaration with deny all clients would not count as dynamic. Dynamic and static leases present for 192.168.11.13. Remove host declaration pc1 or remove 192.168.11.13 from the dynamic address pool for 192.168.11.0/24 Is there a way to have the DHCP server send an DHCPNA to clients if they have a host statement and retain this dynamic range?

  Read the article

• unreadable corrupted ntfs partition - lost clusters reported

  - by Eduardo Martinez

  Hi, partition magic is reporting multiple 'bad file record signature' and 'lost clusters' errors on my 250GB samsung sata disk (connected via usb on a xp sp3). Unfortunately PM is unable to fix. PM shows the drive as being NTFS, detects used space ok and also drive name. But PM browser (right click on partition, browse...) won't show anything (as if disk was empty) Windows Explorer is not even picking the drive name and reports 'the file or directory is corrupted and unreadable' PTDD partition table doctor demo tells me the boot sector is fine, and I can see all disk content on its browser - but crucially cannot copy that content over to a new disk (PTDD browser is pretty arid to say the least) Also tried - photorec-6.11.3 - it actually started to extract files but wouldn't keep file names or any folder structure (maybe I missed sth on the configuration options) - find and mount - intellectual scan went well, the only partition on the disk was detected, then tried to mount into p: but got this error on windows explorer: 'p:\ is not accesible. The media is write protected'. Find and mount allows you to create an image from partition but I don't have a disk big enough at hand. Does anyone know if this will keep the extracted files/folders structure intact? I'm starting to think the disk is pretty screwed and my chances to recover this data are slim. Please someone enlighten me with that marvellous piece of software I am missing :-) Thanks in advance

  Read the article

• Installing WindowsAuthentication breaks authentication / web.config?

  - by Ian Quigley

  I have a clean Windows 2008 R2 box (on a VM) and have installed IIS 7.5 with default options. I then copied a website to it (from Windows 7, IIS 7) and after a little tweaking the website is working fine. The website is currently using and working with Anonymous Authentication. I have gone back to the Windows Components/Sever Manager, Roles - Security and ticked and installed Windows Authentication. When I check my server in IIS (top level above sites) - Authentication, I see Anonymous Authentication (enabled) ASP.NET Impersonation (disabled) Forms Authentication (disbaled) Windows Authentication (enabled) When I check my default website - Authentication, I see as above but "Retrieving status" and an error dialog saying There was an error while performing this operation. Details: Filename c:\inetpub\wwwroot\screwturnwiki\web.config Line number: 96 Error: This configuration section cannot be used in this path. This happens when the section is being locked at the parent level. Locking is either by default (overriderModeDefault="Deny"), or set explicity by a location tag with overrideMode="Deny" or the legacy allowOverride="False". I have tried hand editing the web.config with no success. UN-installing Windows Authentication happily returns my site to working with Anonymous Authentication, and allows me to enable/disable these three options. FYI. I am using ScrewTurnWiki with the Active Directory plug in.

  Read the article

• Lucid Lynx login issue

  - by Bart Silverstrim

  Recently upgraded from Karmic to Lynx. Upgrade seemed to go well, no noticeable issues. I logged in, and my window manager wasn't starting. An application would appear, but sans control buttons and border, so figured the windows manager needed to be given a swift kick. Opened a web browser and a quick google had me run "metacity --replace &" and everything popped up. I re-ran the Compiz configuration tool to enable my rotating desktop cube to the way I liked it, and had to reconfigure my desktop switcher to the right number of desktops (although the first time I ran it, it crashed on the panel and reloaded...odd, but once it relaunched it seemed fine.) Today I installed updates, rebooted and logged in for the second time since my upgrade. Again, the window manager was dead, and my compiz settings were gone, and the workspaces were set back to four (and when I clicked on the preferences to change them, it crashed on the panel and reloaded again). Resetting everything made things look somewhat normal again. I'm guessing it'll work until I reboot again. Googling around isn't turning up similar complaints about Lucid Lynx and the window manager. Before I go deleting preference files, anyone else know of this kind of issue and what could be done about it? Or should I start taking the stab in the dark approach of deleting preference files hoping one of them is corrupt or has something unsupported in it that's throwing LL for a loop?

  Read the article

• RRAS with DHCP when the IP pool is on a different subnet

  - by John B

  I run a small business network and the last couple of days I have been setting up some equipment to add VPN capabilities to our network. I've got the following set up: Windows 2008 R2 with RRAS - 172.22.200.50 Cisco RV082 router - 172.22.100.1 / 172.22.200.1 The Cisco router only support DHCP on a single class C network; 172.22.100.0/24. On the Cisco router I have set up an additional subnet; 172.22.200.0/24. The DHCP range is 172.22.100.200-254 When a PPTP connection comes in to the router, it is forwarded to my RRAS at 172.22.200.50. If I configure RRAS to assign IPs from a static pool on the 172.22.200.0/24 subnet everything works fine except the DNS suffix / search domain. However, if I set RRAS to use DHCP I am no longer able to contact any devices on the network. The IP I receive is on a different subnet (172.22.100.0/24). Is it possible to still use DHCP as the method of ip assignment in RRAS, even when the IP adresses assigned are in a different subnet? If yes, what piece of configuration am I missing to fix the VPN connection issues mentioned in the paragraph above. The reason I want RRAS with DHCP to work is because from what I have understood, this is the "only" way to hand out a DNS suffix to VPN clients. Any help on this matter is greatly appreciated!

  Read the article

• How to use the correct SSH private key?

  - by Dail

  I have a private key inside /home/myuser/.ssh/privateKey I have a problem connecting to the ssh server, because i always get: Permission denied (publickey). I tried to debug the problem and i find that ssh is reading wrong file, take a look at the output: [damiano@Damiano-PC .ssh]$ ssh -v root@vps1 OpenSSH_5.8p2, OpenSSL 1.0.0g-fips 18 Jan 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for vps1 debug1: Applying options for * debug1: Connecting to 111.111.111.111 [111.111.111.111] port 2000. debug1: Connection established. debug1: identity file /home/damiano/.ssh/id_rsa type -1 debug1: identity file /home/damiano/.ssh/id_rsa-cert type -1 debug1: identity file /home/damiano/.ssh/id_dsa type -1 debug1: identity file /home/damiano/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-7ubuntu1 debug1: match: OpenSSH_5.8p1 Debian-7ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 74:8f:87:fe:b8:25:85:02:d4:b6:5e:03:08:d0:9f:4e debug1: Host '[111.111.111.111]:2000' is known and matches the RSA host key. debug1: Found key in /home/damiano/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/damiano/.ssh/id_rsa debug1: Trying private key: /home/damiano/.ssh/id_dsa debug1: No more authentication methods to try. as you can see ssh is trying to read: /home/damiano/.ssh/id_rsa but i don't have this file, i named it differently. How could I tell to SSH to use the correct private key file? Thanks!

  Read the article

• SSO "Portal"

  - by Clinton Blackmore

  Pursuant to my question on alleviating the password explosion, I've contacted some of the services to whom we are paying money to access their websites to ask if we could authenticate our own users, and some of them said yes and send me specs on how to do so. (One of the sites called such a system a page a "portal"; I've never heard the term used in quite that way.) It is simple enough that I am tempted to roll my own. The largest complication is that one site wants us to store a key for every user in our database (and I think the LDAP database makes sense) after their initial login. So, non-trivial, but doable. The nature of these sorts of tasks, I expect, is that if they start out small and simple, they don't end that way. There must be some software that addresses this that is readily extended, surely. In my searching, I've come across: SimpleSAMLphp JOSSO RubyCAS-Server Shibboleth Pubcookie OpenID [Wow, gee. I'd missed some of those in my previous searches! The wikipedia page on Central Authentication Services is useful, and the section on Alternatives to OpenID makes it look like there is a lot of choice.] Can anyone recommend any of these, or suggest ones to avoid? Internally, we are authenticating using Apple's Open Directory [ == OpenLDAP + Kerberos + Password Server (which, I believe, == SAML) ]. As far as extending/tweaking/advanced configuration of a system, I am able to program in Python, C++, can do some basic PHP, and may be able to remember some Java. Looks like I need to pick up Ruby at some point. Addendum: I would also like users to be able to change their passwords over the web (and for certain users to change passwords of other users).

  Read the article

• Software to automate website screenshot capture

  - by Leniel Macaferi

  Do you know any software that can automate the process of getting screenshots of every page of a website? It would act like a spider/crawler/robot. You name it... For example: I developed a website and now I'd like to get a screenshot of every page of the site. I of course could do it manually (a lot of work). For each module of the site (Student, Payment, etc) I have different pages (Create, Edit, Details, Delete, etc) forms. The thing I'm looking for is a software that can visit every link of the site and then capture the screen - a software that can automate the whole process. It would also be good if the software allowed the user to pass a list of URLs to capture screenshots allowing even more fine grained configuration. EDIT: I tried Selenium mentioned by Aaron in his answer but I managed to find an app that does exactly what I needed. It's called Paparazzi!. I wrote a blog post to showcase my attempt at Selenium and the findings regarding Paparazzi!'s batch capture functionality: Software to automate website screenshot capture

  Read the article

• How to add a privilege to an account in Windows?

  - by mark

  Given: A VM running Windows 2008 I am logged on there using my domain account (SHUNRANET\markk) I have added the "Create global objects" privilege to my domain account: The VM is restarted (I know logout/logon is enough, but I had to restart) I logon again using the same domain account. It seems still to have the privilege: I run some process and examine its Security properties using the Process Explorer. The account does not seem to have the privilege: This is not an idle curiousity. I have a real problem, that without this privilege the named pipe WCF binding works neither on Windows 2008 nor on Windows 7! Here is an interesting discussion on this matter - http://social.msdn.microsoft.com/forums/en-US/wcf/thread/b71cfd4d-3e7f-4d76-9561-1e6070414620. Does anyone know how to make this work? Thanks. EDIT BTW, when I run the process elevated, everything is fine and the process explorer does display the privilege as expected: But I do not want to run it elevated. EDIT2 I equally welcome any solution. Be it configuration only or mixed with code. EDIT3 I have posted the same question on MSDN forums and they have redirected me to this page - http://support.microsoft.com/default.aspx?scid=kb;EN-US;132958. I am yet to determine the relevance of it, but it looks promising. Notice also that it is a completely coding solution that they propose, so whoever moved this post to the ServerFault - please reinstate it back in the StackOverflow.

  Read the article

• Is the sysadmin/netadmin the defacto project planner at your organization?

  - by user31459

  At my company it has somehow over the past few years slowly become my job to come up with a project plan, milestones and time lines for deployment of developer applications. Typical scenario: My team receives a request for a new website/db combo and date for deployment. I send back a questionnaire for the developer to fill out on all the reqs for the site (ssl? db? growth projections etc.) After I get back all the information, the head of development wants a well developed document of what servers will it live on why those servers what is the time line for creating the resources step-by-step SOP for getting the application on the server and all related resources created (dns, firewall, load balancer etc.) I maybe just whining but it feels like this is something better suited to our Project Management staff (which we have) or to the developer. I understand that I need to give them a time-line on creating the resources, but still feel like this is overkill. We already produce documentation on where everything lives and track configuration changes to equipment. How do other sysadmin folks handle this?

  Read the article

• What does a connection timeout indicate when performing an NFS mount?

  - by DeeDee

  We have a shiny new QNAP NAS (TS-879U-RP), and I'm trying to mount it to our big ol' RHEL server in the same manner as our other two QNAP NAS devices. The IT department won't give me the root privileges to the NAS, so I can't SSH in (I know, I know). The first thing I did was to, via the QNAP web admin interface, create a network share named "Runs." I then added the IP of the RHEL server to the permissions list: On the RHEL server, I then added the following line to /etc/fstab: [IP of NAS]:/Runs /mnt/gsrnas3 nfs defaults 0 0 Aside from the IP and the specific mount directory name, this is how I mounted the other two NAS devices. I then created the gsrnas3 directory under /mnt/, and then ran `mount /mnt/gsrnas3' I got the following error: mount.nfs: Connection timed out My first thought is that it's a ports issue, but I don't have enough specific experience with this issue to know for sure. I have two other NAS devices by the same manufacturer already mounted to this RHEL server, so that leads me to believe the configuration issue is on the NAS side of things. I can ping the NAS device successfully from the RHEL server. Not being able to SSH into said NAS is a huge hassle, though. Any ideas?

  Read the article

• pppd disconnects from 3G, doesn't reconnect, w/ persist set

  - by bytenik

  I am trying to configure pppd to connect to a 3G network (Sprint, in this case) and then stay connected, reconnecting automatically if the remote connection is terminated. I have enabled the persist option. My configuration file is as follows: hide-password noauth connect "/usr/sbin/chat -v -f /etc/chatscripts/cellular" debug /dev/cell 921600 defaultroute noipdefault user " " persist maxfail 0 lcp-echo-failure 10 lcp-echo-interval 60 holdoff 5 However, when the peer disconnects the connection, pppd often waits a long time (substantially more than my holdoff) to reconnect the modem -- if it ever reconnects at all! An example log showing this: May 23 05:17:24 00270e0a8888 pppd[2408]: rcvd [LCP TermReq id=0x26] May 23 05:17:24 00270e0a8888 pppd[2408]: LCP terminated by peer May 23 05:17:24 00270e0a8888 pppd[2408]: Connect time 60.1 minutes. May 23 05:17:24 00270e0a8888 pppd[2408]: Sent 0 bytes, received 0 bytes. May 23 05:17:24 00270e0a8888 pppd[2408]: Script /etc/ppp/ip-down started (pid 2456) May 23 05:17:24 00270e0a8888 pppd[2408]: sent [LCP TermAck id=0x26] May 23 05:17:24 00270e0a8888 pppd[2408]: Script /etc/ppp/ip-down finished (pid 2456), status = 0x0 May 23 05:17:24 00270e0a8888 pppd[2408]: Hangup (SIGHUP) May 23 05:17:24 00270e0a8888 pppd[2408]: Modem hangup May 23 05:17:24 00270e0a8888 pppd[2408]: Connection terminated. May 23 05:17:24 00270e0a8888 pppd[2408]: Terminating on signal 15 May 23 05:17:24 00270e0a8888 pppd[2408]: Exit. May 23 06:08:07 00270e0a8888 pppd[2500]: pppd 2.4.5 started by root, uid 0 May 23 06:08:10 00270e0a8888 pppd[2500]: Script /usr/sbin/chat -v -f /etc/chatscripts/cellular finished (pid 2530), status = 0x0 May 23 06:08:10 00270e0a8888 pppd[2500]: Serial connection established. May 23 06:08:10 00270e0a8888 pppd[2500]: using channel 11 The disconnect at the request of the peer occurs at 5:17, but the reconnect didn't happen until 6:08. I had a friend monitoring the server so I'm not certain that this wasn't a manual reconnection. Either way, it either took almost an hour to reconnect or never reconnected. Shouldn't persist + holdoff 5 cause this to automatically reconnect after 5 seconds of the link terminating?

  Read the article

< Previous Page | 506 507 508 509 510 511 512 513 514 515 516 517  | Next Page >