Search Results

Search found 15116 results on 605 pages for 'customer experience'.

Page 510/605 | < Previous Page | 506 507 508 509 510 511 512 513 514 515 516 517  | Next Page >

  • Flickering issue in external monitor when used with Acer Aspire One D260 netbook (Intel GMA 3150)

    - by seyenne
    I recently purchased a Acer netbook, Aspire One D260. It runs flawlessly. Yesterday I bought a Samsung 23" TFT with a native resolution of 1920x1080. According to the information found in the internet and my local computer dealer, the Intel chipset can handle the native resolution of the monitor. However, this is only partly the case. I use the VGA cable to connect, the monitor instantly switches to the native resolution and now the problem: Occasionally, especially the first 2 hours after booting up, I have a flickering all over the screen, sometimes the entire screen is shaking and spinning around like crazy. I figured out that lowering the resolution avoids the flicker but this helps only for some time. I can rule out that it's the monitor's problem since I found no issues with another notebook. Right now, I have no problems with the netbook, for about 30 minutes I didn't experience any issues... But I don't know for how long, it occurs without warning :-) I'm worried that if I would bring the netbook back to the dealer and explain my problem, after testing it on an external screen in the local shop, everything works just fine... And I won't get helped with the problem because I can't prove it. (I'm currently in Thailand and over here, customer service is nothing like back home in Germany) What can I do? Is this a driver related issue? (I installed the latest GPU driver) Is it because of the VGA cable? (But why does it work sometimes without any problems and with no issues on the other notebook) I monitored the GPU/CPU temperature, nothing changes really over time.. Can it simply be a faulty GPU and is a replacement justifiable? I'm really stressed now because for the time I'm writing, the flickering didn't occur... but for sure, soon or later it will happen again.. I forgot to mention, the problem also happens if the netbook runs on battery, unplugged. So the only hardware that is plugged is the TFT screen. ...........and here it comes again, flickering has just begun. NEED HELP! Thank you all for reading through this and giving any suggestions if possible. Cheers

    Read the article

  • Email delivery management grievances

    - by joxl
    The question I have may be more of principle than anything else, but here's my dilemma. I manage an email system for a small company (about 20 email users). We own a plain-letter .com domain name through Network Solutions. Our email service is hosted by Google Apps. Recently (Feb. 2011) we've been having customers report that they aren't getting our emails. Upon further investigation it seems that the failed emails are all to a common (well known) domain. We have not received any bounce messages for the emails. We've also contacted a few of the intended recipients, who have reported that the messages are not in their spam box; they simply did not receive anything. In these cases we re-sent the same email to an alternate address on another domain, which was successful received. One customer contacted their email provider about the issue. The provider recommended that we submit a form to be white-listed by their domain. Here's where my problem begins. I feel like this is heading down a slippery slope. Doesn't this undermine the very principle of email? If this is the appropriate action to take in these situations where will it end? In theory (following this model) it could be argued that eventually one will first need to "whitelist" (or more appropriately termed "authenticate") themselves with an email host before actually sending any messages. More to this point, what keeps the "bad" spammers from doing the same thing...? We've just gone full circle. I know avoiding anti-spam measures is a big cat-and-mouse game, but I think this is the wrong way of "patching" the problem. Email standards say that messages should not just disappear silently. I have a problem supporting a model that says "you must do < this to make sure your emails aren't ignored". I have a notion to call the provider and voice my complaint, although I have a feeling it will probably fall on deaf ears. Am I missing something here? Is this an acceptable approach to email spam problems? What should I do?

    Read the article

  • Can't send email through Comcast SMTP to my domains

    - by Midnight Oil
    I am a Comcast customer with 3 computers and 3 computer users in the house. There are 2 fully updated Macs and one PC running Windows 7. We use Mail on the Macs, and Outlook on Windows 7. All computer accounts are configured to send mail through port 587 of smtp.comcast.net. I also have two personal domains registered with Network Solutions. For the sake of this discussion, call my domains myOwnDomain1.com and myOwnDomain2.com. I have email addresses at both domains. They are of the form [email protected] and [email protected]. Until recently, our email worked as expected. However, sometime between September 13, 2012 and September 19, 2012, we lost the ability to send email through Comcast's SMTP server to the email addresses at my personal domains. If we attempt to send email through Comcast's SMTP to those addresses, the email never arrives. Furthermore, the email clients give no indication of failure. The email just never arrives. The result is the same on all 3 computers and with all accounts on those computers. We can successfully send email through Comcast's SMTP from any of our accounts on any of our computers to any email address other than to my email addresses at my personal domains! However, I receive email at those domains that is not sent through smtp.comcast.net. For example, I can successfully send email from my gmail and yahoo accounts to my email addresses at my personal domains. Furthermore, I can successfully send email through smtp.myOwnDomain1.com to [email protected] and through smtp.myOwnDoman2.com to [email protected]. Comcast says the problem must be at Network Solutions. According to Network Solutions, their logs show they are not blocking reception of the email, and our IP address is not flagged as a spam source. They say the email is simply not arriving. Does anyone have any ideas why we can't send email through Comcast's SMTP server to my domains? As an odd coincidence, we recently noticed a change in Comcast's SMTP service. there is now a 5 minute delay on all outbound mail. Comcast's SMTP server seems to sit on the mail with a 5 minute timer.

    Read the article

  • Small Business Server services will not start, and remote desktop and UAC are broken

    - by Stephen Jennings
    Yesterday I began setting up a server with Windows Small Business Server 2008. All I am configuring it for right now is to be a domain controller and Exchange server. I completed the initial setup of SBS then started looking through different connection options (allowing VPN versus using a TS Gateway). After I rebooted one time, I started having three not-obviously-related issues: First, I could no longer remote desktop into the computer. I ran TCPView and saw that it was no longer listening on port 3389. I checked everything in Terminal Service Configuration but everything shows the computer ought to be allowing connections. Also, when I tried to use anything that required user account control elevation, the UAC dialog never popped up and the program that was waiting just froze. If I try to run "regedit" from the Run box, for example, it never appears. When I run in safe mode which does not run with UAC, I was able to access everything. I didn't want to deal with it, so I turned off UAC and rebooted. Finally, in the Windows SBS Console, there are status indicators for Security, Updates, Backup, and Other Alerts. The first three get stuck saying "Querying". Looking in the computer alerts, I have events showing the following services stopped: Background Intelligent Transfer Service KtmRm for Distributed Transaction Coordinator Distributed Transaction Coordinator Microsoft Exchange Information Store Microsoft Exchange System Attendant Microsoft Exchange Transport Windows Remote Management Update Services Windows Update I figured I must have configured something wrong accidentally and I couldn't find anything using Google explaining what might be the case, so I just decided to format the hard drive and reinstall SBS from scratch. I did this and everything was working last night, but I just turned the machine back on and it is doing the same thing again! On my second install, I did not configure anything except the following (all from SBS Console): Connect to the Internet (set IP and router address) Turn off customer feedback. Set up internet address. Decline to use a Smart Host for email. Added one standard user account. Since this happened again and I was very careful the second time not to configure anything outside of the SBS Console, I feel like there's something else going on. Right now the machine is on an isolated network that does have internet access. My desktop is the only other machine plugged into this network. Any and all help is appreciated (before I tear my hair out!)

    Read the article

  • Secret, unlogged, transparent, case-sensitive proxy in IIS6?

    - by Ian Boyd
    Does IIS have a secret, unlogged, transparent, case-sensitive proxy built into it? A file exists on the web-server: GET http://www.stackoverflow.com/javascript/ModifyQuoteArea.js HTTP/1.1 Accept: text/html, application/xhtml+xml, */* Accept-Language: en-US User-Agent: Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0) Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: www.stackoverflow.com HTTP/1.1 200 OK Connection: Keep-Alive Content-Length: 29246 Date: Mon, 07 Mar 2011 14:20:07 GMT Content-Type: application/x-javascript ETag: "5a0a6178edacb1:1c51" Server: Microsoft-IIS/6.0 Last-Modified: Fri, 02 Tue 2010 17:03:32 GMT Accept-Ranges: bytes X-Powered-By: ASP.NET ... Problem is that a changes made to the file will not get served, the old (i.e. February of last year) version keeps getting served: HTTP/1.1 200 OK Connection: Keep-Alive Content-Length: 29246 Date: Mon, 07 Mar 2011 14:23:07 GMT Content-Type: application/x-javascript ETag: "5a0a6178edacb1:1c51" Server: Microsoft-IIS/6.0 Last-Modified: Fri, 02 Tue 2010 17:03:32 GMT Accept-Ranges: bytes X-Powered-By: ASP.NET ... The same old file gets served, even though we've: renamed the file deleted the file restarted IIS The request for this file does not appear in the IIS logs (e.g. C:\WINNT\System32\LogFiles\W3SVC7\) And this only happens from the outside (i.e. the internet). If you issue the request locally on the server, then you will: - get the current file (file there) - 404 (file renamed) - 404 (file deleted) But if i change the case of the requested resource, i.e.: GET http://www.stackoverflow.com/javascript/MoDiFyQuOtEArEa.js HTTP/1.1 Accept: text/html, application/xhtml+xml, */* Accept-Language: en-US User-Agent: Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0) Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: www.stackoverflow.com Note: MoDiFyQuOtEArEa.js verses ModifyQuoteArea.js Then i do get the proper file (or get the 404 as i expect if the file is renamed or deleted). But any subsequent changes to the file will not show up until i change the case of the file i'm asking for. Checking the IIS logs all indicate that the (internet) requests are all coming the correct client on the internet (i.e. not from some intermediate proxy). Since the file doesn't exist on the hard drive anymore, i conclude that there is a proxy. The requests serviced from this proxy are not logged in the IIS logs. The requests for new files are logged, and from the client IP, not a proxy IP. The proxy is case sensitivie. This does not sound like something Microsoft, or IIS, would do: - a transparent proxy - case-sensitivie - unlogged - surviving restarts of IIS - surviving in a cache for hours i can't believe that our customer's IIS is doing these things. i'm assuming there is some other transparent proxy in front of IIS. Or, does IIS have a transparent, unlogged, case-sensitive, memory based, proxy, that caches content for at least 7 hours? (Come Monday morning, IIS is serving the correct file, unlogged).

    Read the article

  • Adobe Reader not loading form content

    - by wullxz
    We have an FDL file which is used to offer an online application possibility. The FDL is filled out and sent to a mailbox. When I open the received file, Adobe Reader starts, loads the document in Internet Explorer (had to change my default browser because it doesn't work in chrome - the customer uses IE as default) and displays a warning that Adobe Reader has blocked the connection to the server where the initial document is saved: I can then click on "Trust this document once" (translated by me!) or "Add this host to trusted hosts" (also translated by me!). The second option doesn't work at all. The first option works but is a little bit annoying. I looked into Adobe Readers options (Edit - "Voreinstellungen" in german / the last option - Security (advanced)) and found the possibility to add hosts, files and directories or allow Adobe Reader to use the "Trusted Websites" list from Internetoptions. When I add the website either to Trusted Websites or the trusted list in Adobe Readers options, the warning doesn't pop up but the content in the prefilled (by the applicant) input boxes of the document doesn't show up on Windows 7 but it does show up on Windows XP. This Screenshot shows the settings window described in the last paragraph. The big input box at the bottom normally holds the trusted files/directories/hosts list. System Information: Windows 7 Enterprise x64 Adobe Reader X multiple IE versions (mine is latest but there's also IE 7 or 8) How do I get Adobe Reader to load the content of the form? This behaviour can be reproduced on a PC. When opening an fdf from a command line the form fields are blank even though there is data in the fdf and the pdf is located in a mnaully entered trsuted folder. Steps to reproduce: Clean install a Windows 7 PC (or use a virtual box) Map a network drive to a shared folder with a subfolder e.g. c:\test\docs becomes m:\docs Set security permissions to allow full control to everyone Add an fdf and a matching pdf file in the subfolder Manually add m:\docs to each of the trusted folders in the trust manager registry settings Ensure that Enhanced Security is on Run a command line to open the fdf file Expected result: pdf is opened in Adobe Reader with form fields filled out with data Actual results: pdf is opened with blank fields 'Yellow bar' appears asking to add document to trusted locations It appears that Adobe Reader XI is ignoring the privileged locations entries in the registry. Adding the document via the 'yellow bar' adds the individual document, with the same folder, to the privileged locations but means that the process has to be repeated for every document that needs to be opened from the folder.

    Read the article

  • Problems migrating an EBS backed instance over AWS Regions

    - by gshankar
    Note: I asked this question on the EC2 forums too but haven't received any love there. Hopefully the ServerFault community will be more awesome. The new AWS Sydney region opening up is something that we've been waiting for for a long time but I'm having a lot of trouble migrating our instances over from N. California. I managed to migrate 1 instance over using CloudyScripts to move a snapshot and then firing up a new instance in the Sydney region. This was a very new instance so both the source and destination were running on a Ubuntu 12.04 LTS server and I had no issues there. However, the rest of our instances are all Ubuntu 10.04 LTS and with these, I'm having a lot of problems. I've tried following: 1- following the AWS whitepaper on moving instances which was given to us at the recent Customer Appreciation Day in Sydney where the new region was launched. The problem with this approach was with the last step (Step 19) here you register the image: ec2-register -s snap-0f62ec3f -n "Wombat" -d "migrated Wombat" --region ap-southeast-2 -a x86_64 --kernel aki-937e2ed6 --block-device-mapping "/dev/sdk=ephemeral0" I keep getting this error: Client.InvalidAMIID.NotFound: The AMI ID 'ami-937e2ed6' does not exist which I think is due to the kernel_id not existing in the Sydney region? 2- Using CloudyScripts to move a snapshot and then creating a new volume and attaching to a new instance in Sydney This results in the instance just hanging on boot and failing the status checks. I can't SSH in or look at the server log I suspect that my issue is with finding the right kernel_id for the volume in the new region. However I can't seem to work out how to go about finding this kernel_id, the ones I've tried (from the original instance) don't result in the Client.InvalidAMIID.NotFound: The AMI ID 'ami-937e2ed6' error and any other kernel_id just won't boot. I've tried both 12.04 and 10.04 versions of Ubuntu. Nothing seems to work, I've been banging my head against a wall for a while now, please help! New (broken) instance i-a1acda9b ami-9b8611a1 aki-31990e0b Source instance i-08a6664e ami-b37e2ef6 aki-937e2ed6 p.s. I also tried following this guide on updating my Ubuntu LTS version to 12.04 before doing the migration but it didn't seem to work either, still getting stuck on updating the kernel_id http://ubuntu-smoser.blogspot.com.au/2010/04/upgrading-ebs-instance.html

    Read the article

  • RFC 1918 address on open internet?

    - by longneck
    In trying to diagnose a failover problem with my Cisco ASA 5520 firewalls, I ran a traceroute to www.btfl.com and, much to my surprise, some of the hops came back as RFC 1918 addresses. Just to be clear, this host is not behind my firewall and there is no VPN involved. I have to connect across the open internet to get there. How/why is this possible? asa# traceroute www.btfl.com Tracing the route to 157.56.176.94 1 <redacted> 2 <redacted> 3 <redacted> 4 <redacted> 5 nap-edge-04.inet.qwest.net (67.14.29.170) 0 msec 10 msec 10 msec 6 65.122.166.30 0 msec 0 msec 10 msec 7 207.46.34.23 10 msec 0 msec 10 msec 8 * * * 9 207.46.37.235 30 msec 30 msec 50 msec 10 10.22.112.221 30 msec 10.22.112.219 30 msec 10.22.112.223 30 msec 11 10.175.9.193 30 msec 30 msec 10.175.9.67 30 msec 12 100.94.68.79 40 msec 100.94.70.79 30 msec 100.94.71.73 30 msec 13 100.94.80.39 30 msec 100.94.80.205 40 msec 100.94.80.137 40 msec 14 10.215.80.2 30 msec 10.215.68.16 30 msec 10.175.244.2 30 msec 15 * * * 16 * * * 17 * * * and it does the same thing from my FiOS connection at home: C:\>tracert www.btfl.com Tracing route to www.btfl.com [157.56.176.94] over a maximum of 30 hops: 1 1 ms <1 ms <1 ms myrouter.home [192.168.1.1] 2 8 ms 7 ms 8 ms <redacted> 3 10 ms 13 ms 11 ms <redacted> 4 12 ms 10 ms 10 ms ae2-0.TPA01-BB-RTR2.verizon-gni.net [130.81.199.82] 5 16 ms 16 ms 15 ms 0.ae4.XL2.MIA19.ALTER.NET [152.63.8.117] 6 14 ms 16 ms 16 ms 0.xe-11-0-0.GW1.MIA19.ALTER.NET [152.63.85.94] 7 19 ms 16 ms 16 ms microsoft-gw.customer.alter.net [63.65.188.170] 8 27 ms 33 ms * ge-5-3-0-0.ash-64cb-1a.ntwk.msn.net [207.46.46.177] 9 * * * Request timed out. 10 44 ms 43 ms 43 ms 207.46.37.235 11 42 ms 41 ms 40 ms 10.22.112.225 12 42 ms 43 ms 43 ms 10.175.9.1 13 42 ms 41 ms 42 ms 100.94.68.79 14 40 ms 40 ms 41 ms 100.94.80.193 15 * * * Request timed out.

    Read the article

  • Cisco ASA SSL VPN options?

    - by JonH
    Disclaimer: I am not a network admin so I may be wrong here but I thought asking here would help. I'm a developer mainly on the .net framework as well as helping get a mobile intranet app working. Because this app is only allowed to be used on our network I can easily run this app on our wireless network connection within our building. All is fine and dandy but we'd also like to be able to run this mobile app at say a customer plant using VPN software. I thought surely this could be easy as we exclusively use Samsung s4 phones so I thought I'd download Cisco's Samsung any connect software to allow us to VPN...its right on the play store. Sure enough it doesn't work. I mention it to our network admin who says not possible since we have old technology that doesn't support SSL. He mentions we'd have to upgrade all of our hardware, the firewall, etc. to get this to work. We really need VPN on our phones not only for this app but other internal apps, etc. He did mention the following: We can’t upgrade the software on our ASA, because we don’t have enough memory for the new version.  (the asa is very old).  We can’t add more memory, so we would have to get a new firewall, which I have been told I cannot do. In addition he also mentioned: The Samsung AnyConnect client uses SSL to connect.  With the current (old) version of software that our firewall is running, the SSL connections are unreliable.  We need different hardware in order to upgrade our firewall, which we are unable to attain at this time.  This is the same reason that Windows 8 clients are not able to connect. I am curious hence me asking. vpns seem to be fairly simple to setup. What other options do I have aside from making this a public site or web service that consumes this data over the internet as this is a complete no no. What can we do to make this work without that much effort or cost.

    Read the article

  • Start a software company offshore

    - by Mascarpone
    Hello Everybody, I own a small, very young, EU based (Italy) company, and among other things, we sell IT solutions. I have a degree in applied mathematics, and I mainly deal with user interfaces, embedded systems, automation and web applications. You can say that I'm an enlightened entrepreneur because I work only with open source software (OS, IDE, I release under BSD , ... everything is free as in freedom), I give high importance to post sales services and customer satisfaction, plus I think I'm the best boss someone could desire (LOL), as I have google in mind when I think about IT workers rights. But the most beautiful thing is that, although everybody advised us not to use open source, is that we are quite profitable!!! (for the sixth trimester in a row). Now I offshore most of the work to an Indian company. I divide the work in modules and I outsource the longer or more trivial ones. I spend a lot of time defining the specifications and I leave the hard work to them. Using productivity bonuses, a lot of prototypes and third-party audits I think that my software has reached a very good quality level. I would like to start my own software development company, in order to improve control over process and cut costs. Obviously I can't afford the cost of labor in the EU, so I thought about opening a company in Asia. What I need Is: 1) Cheap labor - I can afford to give productivity bonuses and higher than average wages and stay profitable just because labor is cheap. 2) Many talents - I need a good level of tertiary education, and a good number of graduates, so I can hire junior developers and train and teach them according to my needs and philosophies (e.g.: open source mind) 3) Good infrastructure - buildings, transport, internet, .... everything that a company might need. I thought about 3 possible candidates: 1) India - I already work with indian people, I know that they are realiable and speak a good english. Big cities are too expensive, but maybe a small city like lucknow http://en.wikipedia.org/wiki/Lucknow could suits my needs. 2) China - They say it's cheaper than India, but I everytime I worked with a chineese company the language was a big barrier. They work hard, are somewhat skilled and cheap but maybe it's a risky path. Plus I feel a little uncofortable with their lack of human rights. 3) Philippines - Same as china: cheaper than india, but maybe less educated. Where do you think it's the best place to start a software company? Any reading or book to advise? thank you very much

    Read the article

  • What's the best scenario for using a wireless router with Comcast Business Class

    - by Buck
    Just had Comcast Business Class internet installed (usage details at bottom of post). During the call to order I asked about the hardware they'd be providing and was told it was a docsis 3 modem that I'd have to pay $7.00/month for. Figuring I'd have to buy a router anyway, I decided to get my own modem - a Surfboard SB6121 Docsis 3. I called in to tech support to ask some questions and learned that the modem they would have provided DID have a router built in. It's an SMCD3G-CCR. It's not wireless (we need wireless). The guy explained that it was better to have their hardware here because if there's a problem with our service and we're using our own hardware, chances are they'll blame it on our hardware and do nothing since they don't support it. He explained that I could still hang my own wireless router off their modem/router and if we ever had any service problems, we'd be able to plug directly into their hardware and they'd be able to tell where the problem is and they wouldn't be able to pawn it off onto "customer provided equipment". That all said, a few questions: 1. Am I better off returning my Surfboard modem and getting the Comcast one? If I get a wireless router and plug into one of the ethernet ports of the Comcast device, should I NOT plug anything else into the Comcast device since it would be a different network from anything connecting via the wireless router? Is that correct? Given that I know VERY LITTLE about networking and setting up hardware like this... since I need wireless and will HAVE to get a wireless router to work with this Comcast device, do I need to do anything with the settings of the Comcast device? Do I use security on the Comcast device or the wireless router or both? Any suggestions or anything I need to think about, given this scenario, in order to use a business-type voip service like RingCentral or Jive or Nextiva? Any recommendations on a wireless router for this scenario? We are running 2 PCs (possibly 3-4 in the future) - could be wired for the time being if needed but would prefer wireless; would like to have a networked hard drive and a networked printer; NEED business-type VOIP service asap for 2 phone lines. Would like to hook up some IP cameras at some point (but not the kind that require static IPs since I don't have one nor do I plan to pay Comcast another $15/month for one). I don't have or plan to have any type of web servers or anything like that. Want to use WPA or WPA2 security and take advantage of the NAT feature of the router for additional protection (that's the extent of my networking knowledge).

    Read the article

  • SQL Server database filled the hard drive and freeing up space isn't possible

    - by Jon
    I have a database in SQL Server 2008 on a 1Tb hard drive and it filled the drive, there is only 4Kb free. The MDF file is 323Gb and the LDF is 653Gb. The hard disk this DB is on has no other files on it other than the MDF and LDF so it's impossible to free up any space on the drive. The main hard disk is smaller but there is enough room to transfer the MDF to that drive, in case that helps. This server is overseas at a customer site and it's not possible at the moment to add more disk space to the server. It's also not possible to delete any records because the DB is in a failed mode (due to no disk space) and it doesn't respond to most commands. The Db is currently in full recovery mode which is why the LDF file is so large. This DB really doesn't need to be in full recovery so going forward we plan on switching it to simple mode which will save us a lot of space. I also don't care about losing the LDF file, but I need all of the data. I've spent a lot of time looking for a way out of this problem but everything I've found first involves either freeing up disk space or adding more disk space, neither of which is an option at this time. I'm stuck and any help would be greatly appreciated. I get the following log when trying to switch the DB to online mode. Msg 945, Level 14, State 2, Line 3 Database 'DBNAME' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. Msg 5069, Level 16, State 1, Line 3 ALTER DATABASE statement failed. Msg 1101, Level 17, State 12, Line 3 Could not allocate a new page for database 'DBNAME' because of insufficient disk space in filegroup 'DEFAULT'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup. I've found the following solutions but none work due to having no disk space on that drive, and since the DB is in a failed state I can't run most commmands. - DBCC SHRINKFILE - can't be run because doing a 'use DBNAME' fails - Detaching the DB and then changing the location of the MDF/LDF files, this fails because the DB is in an offline mode so you can't run detach. I'm at a loss about what else to try. Thanks.

    Read the article

  • NIC is receiving, but not transmitting at all?

    - by Shtééf
    I'm trying to fix a very strange problem remotely on a machine at a customer site. The machine is a Dell PowerEdge, I believe a 1950 (haven't verified, but the lspci output matches specs I found.) The machine has two similar NICs, identified as Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) by lspci, and using the bnx2 driver. (I suspect these are on-board and on the same controller, which is what I'm accustomed to for this type of machine.) The primary interface eth0 works perfectly, and is in fact how I am ssh'd in. However, the secondary interface eth1 is not transmitting. I can see this in ifconfig output, for example, where the TX field is always 0. However, it is receiving, and tcpdump shows ARP requests coming from the ISP's gateway on the other side. The interface is physically connected to a Siemens BSTU4 modem, configured by the ISP. The link is properly set to 10MBps and full duplex, without negotation, as the ISP requested. A small /30 subnet is configured. For the sake of anonimity, let's say the machine is 3.3.3.2/30, and the ISP's gateway .1. The machine has no firewall settings whatsoever. Even running something like arping -I eth1 3.3.3.1, and running tcpdump alongside, shows no traffic whatsoever being transmitted on the interface. (But the other side keeps steadily sending ARP requests, and that is all that can be seen.) What could be causing this? Here's some output, anonymized, which may hopefully help: $ ethtool eth1 Settings for eth1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised auto-negotiation: No Speed: 10Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: off Supports Wake-on: d Wake-on: d Link detected: yes $ ip link show eth1 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:15:c5:xx:xx:xx brd ff:ff:ff:ff:ff:ff $ ip -4 addr show eth1 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 inet 3.3.3.2/30 brd 3.3.3.3 scope global eth1 $ ip -4 route show match 3.3.3.0/30 3.3.3.0/30 dev eth1 proto kernel scope link src 3.3.3.2 default via 10.0.0.5 dev eth0

    Read the article

  • Secure copy uucp style

    - by Alexander Janssen
    I often have the case that I have to make a lot of hops to the remote host, just because there is no direct routing between my client and the remote host. When I need to copy files from a remote host two or more hops away, I always have to: client$ ssh host1 host1$ ssh host2 host2$ scp host3:/myfile . host2$ exit host1$ scp host2:myfile . host1$ exit client$ scp host1:myfile . Back when uucp still was being used this would be as simple as a uucp host1!host2!host3 /myfile . I know that there's uucp over ssh, but unfortunately I don't have the proper privileges on those machines to set it up. Also, I'm not sure if I really want to fiddle around with customer's machines. Does anyone know of a method doing this tasks without the need to setup a lot of tunnels or deploying new software to remote hosts? Maybe some kind of recursive script which clones itself to all the remote hosts, doing the hard work for me? Assume that authentication takes place with public keys and that all hosts do SSH Agent Forwarding. Edit: I'm not looking for a way to automatically forwarding my interactive sesssion to the nexthop host. I want a solution to copy files bangpath-style using scp via multiple hops without the need to install uucp on any of those machines. I don't have the (legal) rights or the privileges to make permanent changes to the ssh-config. Also, I'm sharing this username and hosts with a lot of other people. I'm willing to hack up my own script, but I wanted to know if anyone knows something which already does it. Minimum-invasive changes to hosts on the bangpath, simple invocation from the client. Edit 2: To give you an impression of how it's properly been done in interactive sessions, have a look at the GXPC clustershell. This is basically a Python-script, which spwans itself over to all remote hosts which have connectivity and where your ssh-key is installed. The great thing about it is, that you can tell "I can reach HostC via HostB via HostA." It just works. I want to have this for scp.

    Read the article

  • IE9 Error: There was a pr?blem sending the command to the program

    - by HK1
    I'm working on a new/fresh Windows 7 32bit machine that now has IE9 installed. The user is using the Dell Stardock application as his primary "desktop" (all his links there). When we place an internet link there and click on it we get the following error message: There was a problem sending the command to the program. To me this indicates that IE9 is having trouble going to the website we want to go to, which should get passed as a parameter to the browser when it opens. I don't think this is a StarDock/ObjectDock problem because we also have some other problems with internet links. For example, we cannot move an internet link from the Desktop to the Quick Launch on the task bar. When we do try, it forces us to put the link with the IE icon as part of the IE menu instead of allowing us to have a shortcut there as it's own entry. I should mention however, that links on the desktop and in the taskbar do work as we expect them too (without showing the above error message). It appears that this problem started after installing Windows Updates. Since we installed a whole bunch of updates at once I have no idea which one caused the problem. I did have Google Chrome installed but I uninstalled it since the user wants to use IE. The problem started before I uninstalled Chrome. I also reset the browser settings on IE9. It didn't help. Next I uninstalled IE9 which took me back to IE8. This actually did resolve the problem but the problem came back as soon as I installed IE9 again. We have Verizon Internet Security installed. It's actually a McAfee product rebranded to look like Verizon. I'm not real crazy over this software but the customer has a subscription so we're not planning to change it. I have no reason to believe that this is causing the problem and yet I know that security software is often to blame for strange issues. I've looked at the registry settings for the following keys and everything appears to be ok for every single one of them: HKEY_CLASSES_ROOT\.htm HKEY_CLASSES_ROOT\.html HKEY_CLASSES_ROOT\http\shell\open\command HKEY_CLASSES_ROOT\http\shell\open\ddeexec\Application HKEY_CLASSES_ROOT\https\shell\open\command HKEY_CLASSES_ROOT\https\shell\open\ddeexec\Application HKEY_CLASSES_ROOT\htmlfile\shell\open\command HKEY_CLASSES_ROOT\Microsoft.Website\Shell\Open\Command Edit1: I've found two potential solutions but I won't be able to try them until tomorrow. One is to disable the "Windows Font Cache" service. Another is to clear IE cache and browsing history. I won't be able to try out either solution until tomorrow since this is a remote client's machine. I see there are lots of other suggestions online but if you take the time to read them through you'll see that the other suggestions didn't fix the problem.

    Read the article

  • netbook intel GMA 3150 external monitor 1920x1080 flicker problem

    - by seyenne
    Dear all, i recently purchased a acer netbook (apsire one d260). It runs flawlessly. Yesterday I bought a samsung 23" TFT with a native resolution of 1920x1080. According to the information found in the internet and my local computer dealer, the intel chipset can handle the native resolution of the monitor. However, this is only partly the case. I use the VGA cabel to connect, the monitor instantly switches to the native resolution and now the problem: Occasionaly, especially the first 2 hours after booting up, I have a flickering all over the screen, sometimes the entire screen is shaking and spinning around like crazy. I figured out, that lowering the resolution avoids the flicker but this helps only for some time. I can rule out that it's the monitor's problem since I found no issues with another notebook. Right now, I have no problems with the netbook, for about 30 minutes I didn't experience any issues... But I don't know for how long, it occurs without warning :-) I'm worried that if I would bring the netbook back to the dealer and explain my problem, after testing it on an external screen in the local shop, everything works just fine... And I won't get helped with the problem because I can't prove it. (I'm currently in Thailand and over here, customer service is nothing like back home in Germany) What can I do? Is this a driver related issue? (I installed the latest GPU driver) Is it because of the VGA cable? (But why does it work sometimes without any problems and with no issues on the other notebook) I monitored the GPU/CPU temperature, nothing changes really over time..Can it simply be a faulty GPU and is a replacement justifiable? I'm really stressed now because for the time I'm writing, the flickering didn't occur...but for sure, soon or later it will happen again.. I Forgot to mention, the problem also happens if the netbook runs on battery, unplugged. So the only hardware that is plugged is the TFT screen. ...........and here it comes again, flickering has just begun. NEED HELP! Thank you all for reading through this and giving any suggestions if possible. Cheers

    Read the article

  • What server setup for a small web development company? [closed]

    - by Giordano
    I co-own a company with a friend of mine and we have decided to buy a new server to support our business (our current server is an Asus EEE Box, working great but too limited :) ). I should mention that we are web developers but occasionally we do small-office sys admin. Thus, 99% of time we work on GNU/Linux (mainly Ubuntu) but from time to time we need to setup a Windows environment to assist some customers (e.g. setup a temporary SQL Server 2008). Our requirements: Low budget: we don't want the cheapest solution out there but we can't afford to spend too much. Budget could be ~1000-1500€ (before VAT) Robustness: we would like to setup a RAID array and maybe have an external disk where we can store backups Virtualization: we need to be able to setup few servers for development. The scenario is something like this (~8 appliances running in parallel): Redmine + GIT server Bacula server FTP server 3-4 virtual appliances that could be set up on demand to test our applications or support a customer. The appliances could be: LAMP, Tomcat+PostgreSQL, SQL Server Support: if something breaks down it shouldn't be too difficult to find a replacement. Now, given the main requirements, there are some doubts we need to clarify: Do you suggest to buy a prepackaged solution (for example a customized Dell PowerEdge T110 or T310) or to assemble the server by ourselves (buy the separate components)? What RAID configuration do you suggest? I was thinking of RAID1 (probably cheaper) or RAID5. should we buy a hardware RAID controller or is it ok to use a software RAID (mdadm)? In case, which controller do you suggest? What processor do you suggest (Intel Xeon, i3, i5, i7, AMD)? How much RAM? (I was thinking at least 8GB, ~1GB per appliance) What virtualization software do you recommend? VMWare seems to be the best choice, but what about XEN or KVM? We don't want to buy licenses at the moment so we would like to consider only free options. What OS do you recommend? We know Ubuntu, Debian, Gentoo very well (we would like to use Ubuntu Server), however it seems a lot of people goes for CentOS. Thanks in advance if you can help us with this! It's our first "serious" server so many doubts popped up :) Please feel free to add further recommendations if you have some to share ;) Have a nice day

    Read the article

  • Ask How-To Geek: Learning the Office Ribbon, Booting to USB with an Old BIOS, and Snapping Windows

    - by Jason Fitzpatrick
    You’ve got questions and we’ve got answers. Today we highlight how to master the new Office interface, USB boot a computer with outdated BIOS, and snap windows to preset locations. Learning the New Office Ribbon Dear How-To Geek, I feel silly asking this (in light of how long the new Office interface has been out) but my company finally got around to upgrading from Windows XP and Office 2000 so the new interface it totally new to me. Can you recommend any resources for quickly learning the Office ribbon and the new changes? I feel completely lost after two decades of the old Office interface. Help! Sincerely, Where the Hell is Everything? Dear Where the Hell, We think most people were with you at some point in the last few years. “Where the hell is…” could possibly be the slogan for the new ribbon interface. You could browse through some of the dry tutorials online or even get a weighty book on the topic but the best way to learn something new is to get hands on. Ribbon Hero turns learning the new Office features and ribbon layout into a game. It’s no vigorous round of Team Fortress mind you, but it’s significantly more fun than reading a training document. Check out how to install and configure Ribbon Hero here. You’ll be teaching your coworkers new tricks in no time. Boot via USB with an Old BIOS Dear How-To Geek, I’m trying to repurpose some old computers by updating them with lightweight Linux distros but the BIOS on most of the machines is ancient and creaky. How ancient? It doesn’t even support booting from a USB device! I have a large flash drive that I’ve turned into a master installation tool for jobs like this but I can’t use it. The computers in question have USB ports; they just aren’t recognized during the boot process. What can I do? USB Bootin’ in Boise Dear USB Bootin’, It’s great you’re working to breathe life into old hardware! You’ve run into one of the limitations of older BIOSes, USB was around but nobody was thinking about booting off of it. Fortunately if you have a computer old enough to have that kind of BIOS it’s likely to also has a floppy drive or a CDROM drive. While you could make a bootable CDROM for your application we understand that you want to keep using the master USB installer you’ve made. In light of that we recommend PLoP Boot Manager. Think of it like a boot manager for your boot manager. Using it you can create a bootable floppy or CDROM that will enable USB booting of your master USB drive. Make a CD and a floppy version and you’ll have everything in your toolkit you need for future computer refurbishing projects. Read up on creating bootable media with PLoP Boot Manager here. Snapping Windows to Preset Coordinates Dear How-To Geek, Once upon a time I had a company laptop that came with a little utility that snapped windows to preset areas of the screen. This was long before the snap-to-side features in Windows 7. You could essentially configure your screen into a grid pattern of your choosing and then windows would neatly snap into those grids. I have no idea what it was called or if was anymore than a gimmick from the computer manufacturer, but I’d really like to have it on my new computer! Bend and Snap in San Francisco, Dear Bend and Snap, If we had to guess, we’d guess your company must have had a set of laptops from Acer as the program you’re describing sounds exactly like Acer GridVista. Fortunately for you the application was extremely popular and Acer released it independently of their hardware. If, by chance, you’ve since upgraded to a multiple monitor setup the app even supports multiple monitors—many of the configurations are handy for arranging IM windows and other auxiliary communication tools. Check out our guide to installing and configuring Acer GridVista here for more information. Have a question you want to put before the How-To Geek staff? Shoot us an email at [email protected] and then keep an eye out for a solution in the Ask How-To Geek column. Latest Features How-To Geek ETC How to Upgrade Windows 7 Easily (And Understand Whether You Should) The How-To Geek Guide to Audio Editing: Basic Noise Removal Install a Wii Game Loader for Easy Backups and Fast Load Times The Best of CES (Consumer Electronics Show) in 2011 The Worst of CES (Consumer Electronics Show) in 2011 HTG Projects: How to Create Your Own Custom Papercraft Toy Download the New Year in Japan Windows 7 Theme from Microsoft Once More Unto the Breach – Facebook Apps Can Now Access Your Address and Phone Number Dial Zero Speeds You Through Annoying Customer Service Menus Complete Dropquest 2011 and Receive Free Dropbox Storage Desktop Computer versus Laptop Wallpaper The Kids Have No Idea What Old Tech Is [Video]

    Read the article

  • ASP.NET MVC Custom Profile Provider

    - by Ben Griswold
    It’s been a long while since I last used the ASP.NET Profile provider. It’s a shame, too, because it just works with very little development effort: Membership tables installed? Check. Profile enabled in web.config? Check. SqlProfileProvider connection string set? Check.  Profile properties defined in said web.config file? Check. Write code to set value, read value, build and test. Check. Check. Check.  Yep, I thought the built-in Profile stuff was pure gold until I noticed how the user-based information is persisted to the database. It’s stored as xml and, well, that was going to be trouble if I ever wanted to query the profile data.  So, I have avoided the super-easy-to-use ASP.NET Profile provider ever since, until this week, when I decided I could use it to store user-specific properties which I am 99% positive I’ll never need to query against ever.  I opened up my ASP.NET MVC application, completed steps 1-4 (above) in about 3 minutes, started writing my profile get/set code and that’s where the plan broke down.  Oh yeah. That’s right.  Visual Studio auto-generates a strongly-type Profile reference for web site projects but not for ASP.NET MVC or Web Applications.  Bummer. So, I went through the steps of getting a customer profile provider working in my ASP.NET MVC application: First, I defined a CurrentUser routine and my profile properties in a custom Profile class like so: using System.Web.Profile; using System.Web.Security; using Project.Core;   namespace Project.Web.Context {     public class MemberPreferencesProfile : ProfileBase     {         static public MemberPreferencesProfile CurrentUser         {             get             {                 return (MemberPreferencesProfile)                     Create(Membership.GetUser().UserName);             }         }           public Enums.PresenceViewModes? ViewMode         {             get { return ((Enums.PresenceViewModes)                     ( base["ViewMode"] ?? Enums.PresenceViewModes.Category)); }             set { base["ViewMode"] = value; Save(); }         }     } } And then I replaced the existing profile configuration web.config with the following: <profile enabled="true" defaultProvider="MvcSqlProfileProvider"          inherits="Project.Web.Context.MemberPreferencesProfile">        <providers>     <clear/>     <add name="MvcSqlProfileProvider"          type="System.Web.Profile.SqlProfileProvider, System.Web,          Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"          connectionStringName="ApplicationServices" applicationName="/"/>   </providers> </profile> Notice that profile is enabled, I’ve defined the defaultProvider and profile is now inheriting from my custom MemberPreferencesProfile class.  Finally, I am now able to set and get profile property values nearly the same way as I did with website projects: viewMode = MemberPreferencesProfile.CurrentUser.ViewMode; MemberPreferencesProfile.CurrentUser.ViewMode = viewMode;

    Read the article

  • Add Zune Desktop Player to Windows 7 Media Center

    - by DigitalGeekery
    Are you a Zune owner who prefers the Zune player for media playback? Today we’ll show you how to integrate the Zune player with WMC using Media Center Studio. You’ll need to download Media Center Studio and the Zune Desktop player software. (See download links below) Also, make sure you have Media Center closed. Some of the actions in Media Center Studio cannot be performed while WMC is open. Open Media Center Studio and click on the Start Menu tab at the top of the application.   Click the Application button. Here we will create an Entry Point for the Zune player so that we can add it to Media Center. Type in a name for your entry point in the title text box. This is the name that will appear under the tile when added to the Media Center start menu. Next, type in the path to the Zune player. By default this should be C:\Program Files\Zune\Zune.exe. Note: Be sure to use the original path, not a link to the desktop icon.   The Active image is the image that will appear on the tile in Media Center. If you wish to change the default image, click the Browse button and select a different image. Select Stop the currently playing media from the When launched do the following: dropdown list.  Otherwise, if you open Zune player from WMC while playing another form of media, that media will continue to play in the background.   Now we will choose a keystroke to use to exit the Zune player software and return to Media Center. Click on the the green plus (+) button. When prompted, press a key to use to the close the Zune player. Note: This may also work with your Media Center remote. You may want to set a keyboard keystroke as well as a button on your remote to close the program. You may not be able to set certain remote buttons to close the application. We found that the back arrow button worked well. You can also choose a keystroke to kill the program if desired. Be sure to save your work before exiting by clicking the Save button on the Home tab.   Next, select the Start Menu tab and click on the next to Entry points to reveal the available entry points. Find the Zune player tile in the Entry points area. We want to drag the tile out onto one of the menu strips on the start menu. We will drag ours onto the Extras Library strip. When you begin to drag the tile, green plus (+) signs will appear in between the tiles. When you’ve dragged the tile over any of the green plus signs, the  red “Move” label will turn to a blue “Move to” label. Now you can drop the tile into position. Save your changes and then close Media Center Studio. When you open Media Center, you should see your Zune tile on the start menu. When you select the Zune tile in WMC, Media Center will be minimized and Zune player will be launched. Now you can enjoy your media through the Zune player. When you close Zune player with the previously assigned keystroke or by clicking the “X” at the top right, Windows Media Center will be re-opened. Conclusion We found the Zune player worked with two different Media Center remotes that we tested. It was a times a little tricky at times to tell where you were when navigating through the Zune software with a remote, but it did work. In addition to managing your music, the Zune player is a nice way to add podcasts to your Media Center setup. We should also mention that you don’t need to actually own a Zune to install and use the Zune player software. Media Center Studio works on both Vista and Windows 7. We covered Media Center Studio a bit more in depth in a previous post on customizing the Windows Media Center start menu. Are you new to Zune player? Familiarize yourself a bit more by checking out some of our earlier posts like how to update your Zune player, and experiencing your music a whole new way with Zune for PC.   Downloads Zune Desktop Player download Media Center Studio download Similar Articles Productive Geek Tips How To Rip a Music CD in Windows 7 Media CenterIntegrate Hulu Desktop and Windows Media Center in Windows 7Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Fixing When Windows Media Player Library Won’t Let You Add FilesBuilt-in Quick Launch Hotkeys in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins

    Read the article

  • Change the User Interface Language in Ubuntu

    - by Matthew Guay
    Would you like to use your Ubuntu computer in another language?  Here’s how you can easily change your interface language in Ubuntu. Ubuntu’s default install only includes a couple languages, but it makes it easy to find and add a new interface language to your computer.  To get started, open the System menu, select Administration, and then click Language Support. Ubuntu may ask if you want to update or add components to your current default language when you first open the dialog.  Click Install to go ahead and install the additional components, or you can click Remind Me Later to wait as these will be installed automatically when you add a new language. Now we’re ready to find and add an interface language to Ubuntu.  Click Install / Remove Languages to add the language you want. Find the language you want in the list, and click the check box to install it.  Ubuntu will show you all the components it will install for the language; this often includes spellchecking files for OpenOffice as well.  Once you’ve made your selection, click Apply Changes to install your new language.  Make sure you’re connected to the internet, as Ubuntu will have to download the additional components you’ve selected. Enter your system password when prompted, and then Ubuntu will download the needed languages files and install them.   Back in the main Language & Text dialog, we’re now ready to set our new language as default.  Find your new language in the list, and then click and drag it to the top of the list. Notice that Thai is the first language listed, and English is the second.  This will make Thai the default language for menus and windows in this account.  The tooltip reminds us that this setting does not effect system settings like currency or date formats. To change these, select the Text Tab and pick your new language from the drop-down menu.  You can preview the changes in the bottom Example box. The changes we just made will only affect this user account; the login screen and startup will not be affected.  If you wish to change the language in the startup and login screens also, click Apply System-Wide in both dialogs.  Other user accounts will still retain their original language settings; if you wish to change them, you must do it from those accounts. Once you have your new language settings all set, you’ll need to log out of your account and log back in to see your new interface language.  When you re-login, Ubuntu may ask you if you want to update your user folders’ names to your new language.  For example, here Ubuntu is asking if we want to change our folders to their Thai equivalents.  If you wish to do so, click Update or its equivalents in your language. Now your interface will be almost completely translated into your new language.  As you can see here, applications with generic names are translated to Thai but ones with specific names like Shutter keep their original name. Even the help dialogs are translated, which makes it easy for users around to world to get started with Ubuntu.  Once again, you may notice some things that are still in English, but almost everything is translated. Adding a new interface language doesn’t add the new language to your keyboard, so you’ll still need to set that up.  Check out our article on adding languages to your keyboard to get this setup. If you wish to revert to your original language or switch to another new language, simply repeat the above steps, this time dragging your original or new language to the top instead of the one you chose previously. Conclusion Ubuntu has a large number of supported interface languages to make it user-friendly to people around the globe.  And since you can set the language for each user account, it’s easy for multi-lingual individuals to share the same computer. Or, if you’re using Windows, check out our article on how you can Change the User Interface Language in Vista or Windows 7, too! Similar Articles Productive Geek Tips Restart the Ubuntu Gnome User Interface QuicklyChange the User Interface Language in Vista or Windows 7Create a Samba User on UbuntuInstall Samba Server on UbuntuSee Which Groups Your Linux User Belongs To TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED

    Read the article

  • “Being Agile” Means No Documentation, Right?

    - by jesschadwick
    Ask most software professionals what Agile is and they’ll probably start talking about flexibility and delivering what the customer wants.  Some may even mention the word “iterations”.  But inevitably, they’ll say at some point that it means less or even no documentation.  After all, doesn’t creating, updating, and circulating painstakingly comprehensive documentation that everyone and their mother have officially signed off on go against the very core of Agile?  Of course it does!  But really, they’re missing the point! Read The Agile Manifesto. (No, seriously - read it now. It’s short. I’ll wait.)  It’s essentially a list of values.  More specifically, it’s a right-side/left-side weighted list of values:  “Value this over that”. Many people seem to get the impression that this is really a “good vs. bad” list and that those values on the right side are evil and should essentially be tossed on the floor.  This leads to the conclusion that in order to be Agile we must throw away our fancy expensive tools, document as little as possible, and scoff at the idea of a project plan.  This conclusion is quite convenient because it essentially means “less work, more productivity!” (particularly in regards to the documentation and project planning).  I couldn’t disagree with this conclusion more. My interpretation of the Manifesto targets “over” as the operative word.  It’s not just a list of right vs. wrong or good vs. bad.  It’s a list of priorities.  In other words, none of the concepts on the list should be removed from your development lifecycle – they are all important… just not equally important.  This is not a unique interpretation, in fact it says so right at the end of the manifesto! So, the next time your team sits down to tackle that big new project, don’t make the first order of business to outlaw all meetings, documentation, and project plans.  Instead, collaborate with both your team and the business members involved (you do have business members sitting in the room, directly involved in the project planning, right?) and determine the bare minimum that will allow all of you to work and communicate in the best way possible.  This often means that you can pick and choose which parts of the Agile methodologies and process work for your particular project and end up with an amalgamation of Waterfall, Agile, XP, SCRUM and whatever other methodologies the members of your team have been exposed to (my favorite is “SCRUMerfall”). The biggest implication of this is that there is no one way to implement Agile.  There is no checklist with which you can tick off boxes and confidently conclude that, “Yep, we’re Agile™!”  In fact, depending on your business and the members of your team, moving to Agile full-bore may actually be ill-advised.  Such a drastic change just ends up taking everyone out of their comfort zone which they inevitably fall back into by the end of the project.  This often results in frustration to the point that Agile is abandoned altogether because “we just need to ship something!”  Needless to say, this is far more devastating to a project. Instead, I offer this approach: keep it simple and take it slow.  If your business members or customers are only involved at the beginning phases and nowhere to be seen until the project is delivered, invite them to your daily meetings; encourage them to keep up to speed on what’s going on on a daily basis and provide feedback.  If your current process is heavy on the documentation, try to reduce it as opposed to eliminating it outright.  If you need a “TPS Change Request” signed in triplicate with a 5-day “cooling off period” before a change is implemented, try a simple bug tracking system!  Tighten the feedback loop! Finally, at the end of every “iteration” (whatever that means to you, as long as it’s relatively frequent), take as much time as you can spare (even if it’s an hour or so) and perform some kind of retrospective.  Learn from your mistakes.  Figure out what’s working for you and what’s not, then fix it.  Before you know it you’ve got a handful of iterations and/or projects under your belt and you sit down with your team to realize that, “Hey, this is working - we’re pretty Agile!”  After all, Agile is a Zen journey.  It’s a destination that you aim for, not force, and even if you never reach true “enlightenment” that doesn’t mean your team can’t be exponentially better off from merely taking the journey.

    Read the article

  • Seriously, It’s Time to Get Your Content Act Together

    - by Mike Stiles
    Branded content, content marketing, social content, brand journalism, we’re seeing those terms more and more. Why? The technology tools are coming together. We should know. We can gather big data, crunch it, listen to the public, moderate, respond, get to know the customer intimately, know what they like, know what they want, we can target, distribute, amplify, measure engagement and reaction, modify strategy and even automate a great deal of all that. An amazing machine, a sleek, smooth-running engine has been built such that all the parts can interact and work together to deliver peak performance and maximum output. But that engine isn’t going anywhere without any gas. Content is the gas. Yes, we curate other people’s content. We can siphon their gas. There’s tech to help with that too. But as for the creation of original, worthwhile content made for a specific audience, our audience, machines can’t do that…at least not yet. Curated content is great. But somebody has to originate the content for it to be curated and shared. And since the need for good, curated content is obviously large and the desire to share is there, it’s a winning proposition for a brand to be a consistent producer of original content. And yet, it feels like content is an issue we’re avoiding. There’s a reluctance to build a massive pipeline if you have no idea what you’re going to run through it. The C-suite often doesn’t know what content is, that it’s different from ads, where to get it, who makes it, how long it should be, what the point of it is if there’s no hard sell of the product, what it costs, how to use it, how to measure it, how to make sure it’s good, or how to make sure it will keep flowing. It could be the reason many brands aren’t pulling the trigger on socially enabling the enterprise. And that’s a shame, because there are a lot of creative, daring, experimental, uniquely talented entertainers and journalists chomping at the bit to execute content for brands. But for many corporate executives, content is “weird,” and the people who make it are even weirder. The content side of the equation is human. It’s art, but art that can be informed by data. The natural inclination is for brands to turn to their agencies for such creative endeavors. But agencies are falling into one of two categories. They’re failing to transition from ads to content. In “Content Era, What’s the Role of Agencies?” Alexander Jutkowitz says agencies were made for one-hit campaigns, not ongoing content. Or, they’re ready and capable but can’t get clients to do the right things. Agencies have to make money, even if it means continuing to do the wrong things because that’s all the client will agree to. So what we wind up with in the pipeline is advertising, marketing-heavy content, content that was obviously created or spearheaded by non-creative executives, random & inconsistent content, copy written for SEO bots, and other completely uninteresting nightmares. Frank Rose, author of “The Art of Immersion,” writes, “Content without story and excitement is noise pollution.” In the old days, you made an ad and inserted it into shows made by people who knew what they were doing. You could bask in that show’s success and leverage their audience. Now, you are tasked with attracting, amassing and holding your own audience. You may just want to make, advertise and sell your widgets. But now there’s a war on for a precious commodity, attention. People are busy. They have filters to keep uninteresting and irrelevant things out. They value their time and expect value back when they give it up. Joe Pulizzi, founder of the Content Marketing Institute, says, "Your customers don't care about you, your products, your services…they care about themselves, their wants and their needs." Is it worth getting serious about content and doing it right? 61% of consumers feel better about a company that delivers custom content (Custom Content Council). Interesting content is one of the top 3 reasons people follow brands on social (Content+). 78% of consumers think organizations that provide custom content want to build good relationships with them (TMG Custom Media). On the B2B side, 80% of business decision makers prefer to get company info in a series of articles vs. an ad. So what’s the hang-up? Cited barriers to content marketing are lack of human resources (42%) and lack of budget (35%). 54% of brands don’t have a single on-site, dedicated content creator. And only 38% of brands have a content marketing strategy. Tech has built the biggest, most incredible stage for brands that’s ever been built. Putting something on that stage is your responsibility. Do a bad show, or no show at all, and you’ll be the beautiful, talented actress that never got discovered. @mikestilesPhoto: Gabriella Fabbri, stock.xchng

    Read the article

  • SmtpClient and Locked File Attachments

    - by Rick Strahl
    Got a note a couple of days ago from a client using one of my generic routines that wraps SmtpClient. Apparently whenever a file has been attached to a message and emailed with SmtpClient the file remains locked after the message has been sent. Oddly this particular issue hasn’t cropped up before for me although these routines are in use in a number of applications I’ve built. The wrapper I use was built mainly to backfit an old pre-.NET 2.0 email client I built using Sockets to avoid the CDO nightmares of the .NET 1.x mail client. The current class retained the same class interface but now internally uses SmtpClient which holds a flat property interface that makes it less verbose to send off email messages. File attachments in this interface are handled by providing a comma delimited list for files in an Attachments string property which is then collected along with the other flat property settings and eventually passed on to SmtpClient in the form of a MailMessage structure. The jist of the code is something like this: /// <summary> /// Fully self contained mail sending method. Sends an email message by connecting /// and disconnecting from the email server. /// </summary> /// <returns>true or false</returns> public bool SendMail() { if (!this.Connect()) return false; try { // Create and configure the message MailMessage msg = this.GetMessage(); smtp.Send(msg); this.OnSendComplete(this); } catch (Exception ex) { string msg = ex.Message; if (ex.InnerException != null) msg = ex.InnerException.Message; this.SetError(msg); this.OnSendError(this); return false; } finally { // close connection and clear out headers // SmtpClient instance nulled out this.Close(); } return true; } /// <summary> /// Configures the message interface /// </summary> /// <param name="msg"></param> protected virtual MailMessage GetMessage() { MailMessage msg = new MailMessage(); msg.Body = this.Message; msg.Subject = this.Subject; msg.From = new MailAddress(this.SenderEmail, this.SenderName); if (!string.IsNullOrEmpty(this.ReplyTo)) msg.ReplyTo = new MailAddress(this.ReplyTo); // Send all the different recipients this.AssignMailAddresses(msg.To, this.Recipient); this.AssignMailAddresses(msg.CC, this.CC); this.AssignMailAddresses(msg.Bcc, this.BCC); if (!string.IsNullOrEmpty(this.Attachments)) { string[] files = this.Attachments.Split(new char[2] { ',', ';' }, StringSplitOptions.RemoveEmptyEntries); foreach (string file in files) { msg.Attachments.Add(new Attachment(file)); } } if (this.ContentType.StartsWith("text/html")) msg.IsBodyHtml = true; else msg.IsBodyHtml = false; msg.BodyEncoding = this.Encoding; … additional code omitted return msg; } Basically this code collects all the property settings of the wrapper object and applies them to the SmtpClient and in GetMessage() to an individual MailMessage properties. Specifically notice that attachment filenames are converted from a comma-delimited string to filenames from which new attachments are created. The code as it’s written however, will cause the problem with file attachments not being released properly. Internally .NET opens up stream handles and reads the files from disk to dump them into the email send stream. The attachments are always sent correctly but the local files are not immediately closed. As you probably guessed the issue is simply that some resources are not automatcially disposed when sending is complete and sure enough the following code change fixes the problem: // Create and configure the message using (MailMessage msg = this.GetMessage()) { smtp.Send(msg); if (this.SendComplete != null) this.OnSendComplete(this); // or use an explicit msg.Dispose() here } The Message object requires an explicit call to Dispose() (or a using() block as I have here) to force the attachment files to get closed. I think this is rather odd behavior for this scenario however. The code I use passes in filenames and my expectation of an API that accepts file names is that it uses the files by opening and streaming them and then closing them when done. Why keep the streams open and require an explicit .Dispose() by the calling code which is bound to lead to unexpected behavior just as my customer ran into? Any API level code should clean up as much as possible and this is clearly not happening here resulting in unexpected behavior. Apparently lots of other folks have run into this before as I found based on a few Twitter comments on this topic. Odd to me too is that SmtpClient() doesn’t implement IDisposable – it’s only the MailMessage (and Attachments) that implement it and require it to clean up for left over resources like open file handles. This means that you couldn’t even use a using() statement around the SmtpClient code to resolve this – instead you’d have to wrap it around the message object which again is rather unexpected. Well, chalk that one up to another small unexpected behavior that wasted a half an hour of my time – hopefully this post will help someone avoid this same half an hour of hunting and searching. Resources: Full code to SmptClientNative (West Wind Web Toolkit Repository) SmtpClient Documentation MSDN © Rick Strahl, West Wind Technologies, 2005-2010Posted in .NET  

    Read the article

  • Dynamic Grouping and Columns

    - by Tim Dexter
    Some good collaboration between myself and Kan Nishida (Oracle BIP Consulting) over at bipconsulting on a question that came in yesterday to an internal mailing list. Is there a way to allow columns to be place into a template dynamically? This would be similar to the Answers Column selector. A customer has said Crystal can do this and I am trying to see how BI Pub can do the same. Example: Report has Regions as a dimension in a table, they want the user to select a parameter that will insert either Units or Dollars without having to create multiple templates. Now whether Crystal can actually do it or not is another question, can Publisher? Yes we can! Kan took the first stab. His approach, was to allow to swap out columns in a table in the report. Some quick steps: 1. Create a parameter from BIP server UI 2. Declare the parameter in RTF template You can check this post to see how you can declare the parameter from the server. http://bipconsulting.blogspot.com/2010/02/how-to-pass-user-input-values-to-report.html 3. Use the parameter value to condition if a particular column needs to be displayed or not. You can use <?if@column:.....?> syntax for Column level IF condition. The if@column is covered in user documentation. This would allow a developer to create a report with the parameter or multiple parameters to allow the user to pick a column to be included in the report. I took a slightly different tack, with the mention of the column selector in the Answers report I took that to mean that the user wanted to select more of a dimensional column and then have the report recalculate all its totals and subtotals based on that selected column. This is a little bit more involved and involves some smart XSL and XPATH expressions, but still very doable. The user can select a column as a parameter, that is passed to the template rather than the query. The parameter value that is actually passed is the element name that you want to regroup the data by. Inside the template we then reference that parameter value in our for-each-group loop. That's where we need the trixy XSL/XPATH code to get the regrouping to happen. At this juncture, I need to hat tip to Klaus, for his article on dynamic sorting that he wrote back in 2006. I basically took his sorting code and applied it to the for-each loop. You can follow both of Kan's first two steps above i.e. Create a parameter from BIP server UI - this just needs to be based on a 'list' type list of value with name/value pairs e.g. Department/DEPARTMENT_NAME, Job/JOB_TITLE, etc. The user picks the 'friendly' value and the server passes the element name to the template. Declare the parameter in RTF template - been here before lots of times right? <?param@begin:group1;'"DEPARTMENT_NAME"'?> I have used a default value so that I can test the funtionality inside the template builder (notice the single and double quotes.) Next step is to use the template builder to build a re-grouped report layout. It does not matter if its hard coded right now; we will add in the dynamic piece next. Once you have a functioning template that is re-grouping correctly. Open up the for-each-group field and modify it to use the parameter: <?for-each-group:ROW;./*[name(.) = $group1]?> 'group1' is my grouping parameter, declared above. We need the XPATH expression to find the column in the XML structure we want to group that matches the one passed by the parameter. Its essentially looking through the data tree for a match. We can show the actual grouping value in the report output with a similar XPATH expression <?./*[name(.) = $group1]?> In my example, I took things a little further so that I could have a dynamic label for the parameter value. For instance if I am using MANAGER as the parameter I want to show: Manager: Tim Dexter My XML elements are readable e.g. DEPARTMENT_NAME. Its a simple case of replacing the underscore with a space and then 'initcapping' the result: <?xdoxslt:init_cap(translate($group1,'_',' '))?> With this in place, the user can now select a grouping column in the BIP report viewer and the layout will re-group the data and any calculations based on that column. I built a group above report but you could equally build the group left version to truly mimic the Answers column selector. If you are interested you can get an example report, sample data and layout template here. Of course, you can combine Klaus' dynamic sorting, Kan's conditional column approach and this dynamic grouping to build a real kick ass report for users that will keep them happy for hours..

    Read the article

< Previous Page | 506 507 508 509 510 511 512 513 514 515 516 517  | Next Page >