Search Results

Search found 16940 results on 678 pages for 'disk drive'.

Page 511/678 | < Previous Page | 507 508 509 510 511 512 513 514 515 516 517 518  | Next Page >

• Problems with undo in VS2010, I need help figuring out what is wrong

  - by IZZO

  I have been battling with my Microsoft Visual C# 2010 Express for a while now. When I undo things some times it works fine and other times it replaces lines of code I didn't touch with lines I deleted. It seems to pick targets at random and most of the time I can easily repair what it has done or just not save the changes. This problem is starting to drive me crazy. Does anyone have any idea why this is happening to me? When I was using Microsoft Visual 2012 this never happen. I have tried to search this problem with no luck so far.

  Read the article

• Openvz: What exactly does it mean when tcpsndbuf failcnt increases? Why must there be a minimum difference between limit and barrier?

  - by Antonis Christofides

  When the failcnt of tcpsndbuf increases, what does this mean? Does it mean the system had to go past the barrier, or past the limit? Or, maybe, that the system failed to provide enough buffers, either because it needed to go past the limit, or because it needed to go past the barrier but couldn't because other VMs were using too many resources? I understand the difference between barrier and limit only for disk space, where you can specify a grace period for which the system can exceed the barrier but not the limit. But in resources like tcpsndbuf, which have no such thing as a grace period, what is the meaning of barrier vs. limit? Why does the difference between barrier and limit in tcpsndbuf be at least 2.5KB times tcpnumsock? I could understand it if, e.g., tcpsndbuf should be at least 2.5KB times tcpnumsock (either the barrier or the limit), but why should I care about the difference between the barrier and the limit?

  Read the article

• Apollo linux boot into single user

  - by Spirit

  We have a device that runs Appolo Linux and I have to boot that device into a single user mode so that i can run a fsck to check the hard drive for errors. I've been goggling this during the past hour and so far I haven't found any specific method on how can I do that on this version on Linux. The device is known formerly as a NFX Cinxi One - now re-branded into BlackStratus LOG Storm. If any of you have any experience with this one you may know it is a device that is used to collect logs from other servers. I know that the above info isn't much but that is everything that I can provide up until now since tomorrow I have to follow up closely on this problem.

  Read the article

• Generating and collaborating on network map diagrams?

  - by Ian C.

  I have to turn out some network topology maps for very large networks. I'd like the format for the maps to be something other people can also edit and contribute to regardless of what software I'm using on my Mac to build them. I don't mind spending money on my end for software, but I can't require that my clients spend any money. I also can't promise my clients are also using OS X -- they could be running Linux or Windows. Is there a best software application on OS X for producing maps that I can share with other, non-OS X, users? Is there a best format for sharing topology maps that I should use when exporting the maps to disk?

  Read the article

• What is the fastest RAID in practise?

  - by Luke

  I'm going to be rebuilding my server, and I want much faster access to my data. I've used RAID 1 and 0 in the past, and decided upon RAID 10 (dedicated RAID card). Then someone told me to use RAID 5+0, then someone else told me to use RAID 6+0. Assuming the Hardware RAID Card supports each level, what is currently the FASTEST RAID available, given x number of hard drives? Reliability is now another factor, and I am willing to spend money on new drives if a drive (or multiple) fail. I simply want to know what the fastest RAID level is, along with some reliability for recovering from a failure

  Read the article

• Per process I/O accounting on AIX

  - by ipozgaj

  Is there a way of getting per process I/O statistics on AIX, i.e. to get current disk I/O rate of a process? Commands like iostat, nmon, topas etc. can't display such data. Filemon also doesn't help. Actually, what I would need is something much like iotop(1) command on Linux. Update: it seems there is no builtin command(s) to do this. I will most probably make my own by using the SPMI API.

  Read the article

• Replace files with symlink

  - by soandos

  This question is intended to be the inverse of Replace Symbolic Links with Files, but for windows. I have started running out of space on my SSD drive, and I found that about 12% of used space is in my installer folder (holds the .msi files for all the programs that I have installed) I am looking for two things: A way to move this (or any) folder via symlink. Ideally, some powershell function that I could use to just designate a folder, a destination, and the symlink would be created in the original (pointing to the destination) In this particular case, a registry change that would allow the location to be move would also be helpful, but I would still prefer solution 1. How can this be done?

  Read the article

• Using cd Command in Windows Command Line, Can't Navigate to D:\

  - by nicorellius

  This may be a stupid question, and I think I have looked elsewhere to find the answer... Might be a path issue, but when I open the command line and type from the C:\>: cd D:\ I cannot get to the D drive. Even if I type: cd D:\<folder name> The command.exe will auto-complete the line with the tab key, so it knows where I'm at. It just doesn't print to screen the result or actually get me there. This problem exists for the network drives as well. Now, if I use the chdir (cd) command like this: chdir D: or cd d: I get the print out of the D:\ below the command but it still says I'm in the C:\. I feel like I'm missing something simple.

  Read the article

• Where might I be having problems with making web server acessable (XAMPP)

  - by Erx

  I've installed XAMPP and it seems to be working - sort of. It will serve pages if I access it via http://localhost or 127.0.0.1 but not if I use the actual IP address I have. I thought it might be a firewall issue, so I turned off the firewall and the issue still remains. I don't have enough experience to know where to look next, so I thought I might get some advice here. Running on Vista. The error I'm actually getting it "Timed Out". I've had XAMPP running on this machine prior, but I've had to reinstall my OS/new hard drive ... and I can't seem to get it working.

  Read the article

• Image archiving on network folders.

  - by Steve

  Our company uses Symantec Enterprise Vault to archive network folders and files, presumably to save on disk space. I can't see any other benefits. Our company is an architectural firm, and the problem our users face is locating particular images in network folders. Because all the files are archived, Windows Explorer is unable to generate image thumbnails. Each image needs to be individually restored from archive by double-click before it can be viewed. This is a big time-waster for our architects. Symantec say there is no workaround for this. Does anyone know of an alternative we could use for archiving images? Alternatively, some batch utility to create and maintain a thumbs.db file in each folder? Thanks.

  Read the article

• Windows 7 does not 'wake up' from Sleep mode

  - by the watchmaker

  I'm new to Windows 7, so I don't know if this is normal. When the computer is idle for 30 minutes, the screen goes black and no key pressing or mouse movement will bring the computer out of standby. The computer is still running (fans and hard drive noise) but it will not respond and the screen remains black. The only way to get a response is to press and hold the power button until it goes off, then switch it back on. When it turns on it says "Resuming Windows" and then goes black again. Is this normal? Can the time-out delay be increased? Is there a better workaround than switching the PC on and off?

  Read the article

• Problem accessing the remote working space on my new SBS 2008 box

  - by Dabblernl

  This supposedly easy to install OS is starting to drive me nuts... SYMPTOMS: When trying to connect to the remote workplace I get (and ignore) the security warning because I am currently testing with the self issued certificate. After loggin in the remote workplace's main screen displays but the images on it do not load. When I try to click the email link I am thrown back to the login screen. If I try the login to exchange directly by typing in the remote.mydomain.com/owa address I get a 403 error that I am denied access. The problem occurs on both a vista and a win 7 machine. It seems that some security setting is playing tricks with me. How can I troubleshoot this?

  Read the article

• What is the right iptables rule to allow apt-get to download programs?

  - by anthony01

  When I type something like sudo apt-get install firefox, everything work until it asks me: After this operation, 77 MB of additional disk space will be used. Do you want to continue [Y/n]? Y Then error messages are displayed: Failed to fetch: <URL> My iptables rules are as follows: -P INPUT DROP -P OUTPUT DROP -P FORWARD DROP -A INPUT -i lo -j ACCEPT -A OUTPUT -o lo -j ACCEPT -A INPUT -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT -A OUTPUT -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT What should I add to allow apt-get to download updates? Thanks

  Read the article

• raid 5 creation (using mdadm) lots of read/writes on creation: is this normal?

  - by Gbrits

  I created a software raid 5 disk using: mdadm -C /dev/md2 -l5 -n4 /dev/sd[i-l] at the same time I'm using dstat to see io-activity: dstat -c -d -D total,sda1,md2,sdi,sdj,sdk,sdl -l -m -n and notice that disks sd[i-k] are all read from and sdl is written to. Now, I do understand that raid5 has to be configured, but it takes a really long time and all disks are clean & formatted (using xfs) so I figure there might be some kind of shortcut to skip (unnecessary? ) checking.. Is it? The creation is part of a time-critical nightly batch-process (run on amazon ec2) so it's not a one-time thing. Thanks, Geert-Jan

  Read the article

• How to set default permissions for automounted FAT drives in Ubuntu 9.10?

  - by piman

  I've got many FAT32 drives that I'd like to mount in Ubuntu such that they have permission mode 700 for directories and 600 for all other files. By default, they have 755 for all files, which is not particularly useful since almost no non-directories should be executable, and it screws up version control repos hosted on the drives. "Back in the day" I would have had the drives listed in /etc/fstab with the umask/dmask I want and there was no such thing as a default. These days, drives automount under their volume names. Which is great, except now I have no idea how to set the default. I have tried changing the /system/storage/default_options/vfat/mount_options gconf key with no apparently effect. It was 077 initially but the mounted drive reflected a default of 022; changing it and re-inserting the drives resulted in the files still having permission bits of 755.

  Read the article

• Reinstall Windows on mass computers

  - by user791022

  At work there are about 40 DELL PC's - half of them are Windows Vista and other half are Windows 7. Some of the DELL PC's are 220s and 230s model. If I want to re-install Windows then I can use a Recovery/Recovery disk on any Dell PC's (220s or 230s). It take too long to complete the setup, for example - after re installing the Windows then I need to install the drivers, update windows, install IE9, create default users account and so on. It take about 3 hour to complete setup! I am looking for a solution Where I can create an Image of windows (with driver and completed setup) and then I use same Image it on any PC's at work? If one of the PC need reinstalling - I would like to reinstall via network (LAN) by grabbing the Image? Is there something that before booting into windows - computer check something via network which can download the Image?

  Read the article

• suggest AMD machine for software developement [closed]

  - by superb1

  I need a AMD machine (Processor, Motherboard, Ram, HDD ) for software developement .. I will mainly use microsoft visual studio 2010. Operating system would be windows 7 . Suggest decent machine but i dont want to overspend....i guess the rating system of ecommerce websites may help you to suggest !? I want you to suggest from this list : http://www.flipkart.com/computers/components/processor-20246?ref=bae2643a-2cc8-4710-942f-79e7fbc1b416 plz note basic criteria for vs 2010 is 1.6GHz or faster processor 1 GB (32 Bit) Ram 5400 RPM hard disk DirectX 9 capable video card running at 1024 x 768 or higher-resolution

  Read the article

• How can I retrieve a MS SQL Express Database from a non-booting computer?

  - by Redandwhite

  A client has a very important database that has not been backed up in 6 months. The PC has promptly failed. The Windows directory is corrupt, and the computer will not boot. It had a Microsoft SQL Server Express 2005 database on it. I have access to the hard drive by booting in with an Ubuntu Live CD, but I am not sure if I can find the database. I am not sure what I am looking for, or where to look either. The dead machine had Windows XP on it.

  Read the article

• Mac OS X Lion (10.7.3) Virtual Machine?

  - by Ben Hooper

  I have been looking into this for a while and have attempted quite a few "solutions" (hackintosh boot images, universal unlockers, etc) before I gave in and asked for help. I know this is extremely difficult to accomplish, especially with an AMD CPU, but it has been done and it can't hurt to ask. Question Does anyone know of any way to actually get Mac OS X Lion (10.7.3) to boot in VMware Workstation 8.0.2? I know that Mac OS X is heavily dependant on hardware configuration, so I will post my PC's hardware below, if it helps. As far as I know it's only reliant on the CPU, but I will post it all just in case. PC Hardware Motherboard: ASUS M4A77T CPU: AMD Phenom II x4 955 Black Edition Graphics Card: Palit Sonic Platinum nVIDIA Geforce GTX 460 Memory: G-Skill [RipjawsX F3-12800CL9D-8GBXL] 8GB PSU: Arctic Power 700(W) Hard Drive: SAMSUNG HD204UI 2TB Thanks in advance. :)

  Read the article

• What's the easiest way to move from one Macintosh to another?

  - by schnapple

  Here's the story: Company bought me a $599 Mac mini (as of this writing, 2.26GHz/160GB HD/2GB RAM) I have it set up to some extent with software for development Company decides it needs a second Mac for QA I convince company to buy the $799 Mac mini for the second machine (as of this writing, 2.53GHz/320GB HD/4GB RAM), let me have it for development, and let QA have the $599 Mac mini Company does just that, now I have both So, what's the best way to move from one of these to the other? Just set up everything on the second one and be done with it? Can I transfer things from the first to the second somehow? I'm running Time Machine backups to an external drive on the $599 Mac mini, if that helps. Also both of these will be on the network at the same time, other than renaming one of the machines are there considerations to be had there?

  Read the article

• Linux using the link command

  - by Xavier

  Here it goes. I have a folder that contains a not so large amount of space called /data/backup but I have been told that if I link that folder (/data/backup) to an even bigger folder area like /bigdata/backup for example, that I will be able to execute backups to the /data/backup folder because it will be just a link but the data will be seen in both folders and the latter one (/bigdata/backup) will contain the backup results but it will show on both folders and since the /bigdata/backup has far more disk space then the backup will no longer fail because of space problems in the /data/backup one. Is this true? Thanks Xav

  Read the article

• Can't burn 8.1G iso onto 8.4GB DVD - "Media does not have enough free space"

  - by Max Williams

  I'm trying to burn a dvd on a mac with an external (firewire-connected) dvd drive. I'm checking the size of the iso thus: DVD-4:dvd_files macbook$ ls -l /tmp/hybrid.iso -rw-r--r-- 1 macbook wheel 8700884992 Aug 22 10:57 /tmp/hybrid.iso DVD-4:dvd_files macbook$ ls -lh /tmp/hybrid.iso -rw-r--r-- 1 macbook wheel 8.1G Aug 22 10:57 /tmp/hybrid.iso The "human-readable" size is 8.1 Gig but when i try to burn, onto an 8.4G dual-layer dvd, it says "Media does not have enough free space" The definition of a "Gigabyte" according to Wikipedia is 1 billion bytes, so the iso size should actually be 8.7 Gig according to this definition, in which case the disk definitely isn't big enough, and it's just that the -h option to ls is misleading. Is the discrepancy just due to the ls command using a different definition of "G" (eg 1024 Meg aka 1.07 Gig? This comes out as 8.103 which fits what ls is displaying)

  Read the article

• Advice on off-site backup of Hyper-V Failover Cluster

  - by Paul McCowat

  We are currently setting up a Server 2008 R2 which will be off-site over a leased line with VPN. At the main site is 2 x Hyper-V hosts in a failover cluster with PowerVault M3000i iSCSI SAN. We are using BackupAssist for local backups and each host backups up itself and it's guests nightly creating a 500GB backup each which is copied to a 2TB rotated NAS drive. Files and SQL DB's are also backed up / log shipped etc. Looking for the best way to backup the Hyper-V VM's and copy them off-site so that the OS's are only a month old and the data is a day old. The main backups are too large to transfer between backups so options discussed so far are: Take rotating individual backups of the VM's each day and copy over, Day 1 SQL VM, Day 2 Exchange VM etc, would require more storage. Look in to Hyper-V snapshots, however don't believe these are supported in clustering. 3rd party replication tools

  Read the article

• Windows Server 2008 R2 and OSX 10.5/.6/.7

  - by Keith Loughnane

  I'm handling a migration from a on old mac server to a Windows Server 2008 R2 machine running a 12TB(10 usable) RAID5 server. It's using an SMB share and now the OSX 10.5/.6 users can search sometimes it works but takes up to 10 minutes. The OSX 10.7 machine seems to be fine. I've looked in the root of the shared drive for a .Spotlight-V100 file (ls -a) but it doesn't seem to be there. mdutil says indexing is on for that volume and I have cleared the index using mdutil -E /Volumes/MeSharedVolume numerous times. Any ideas?

  Read the article

• Where are the Windows 7 System Restore Points stored and how to preserve them?

  - by Rohit

  I am using Windows 7 Professional. My system crashed few days back and to recover that, I inserted the Windows 7 DVD. While running the System Restore from the DVD, it showed there are no restore points. It shocked me. I created few restore points, where they disappeared. Is there a way to preserve these restore points from accidental deletion? Is there any other FREE tool to take snapshot of the image on other disk?

  Read the article

< Previous Page | 507 508 509 510 511 512 513 514 515 516 517 518  | Next Page >