Search Results

Search found 44501 results on 1781 pages for 'software development life'.

Page 511/1781 | < Previous Page | 507 508 509 510 511 512 513 514 515 516 517 518  | Next Page >

  • So&hellip; What is a SharePoint Developer?

    - by Mark Rackley
    A few days ago Stacy Draper and I were chatting about what it means to be a SharePoint Developer. That actually turns about to be a conversation with lots of shades of grey. Stacy thought it would make a good blog post… well, I can’t promise this to be a GOOD blog post… So, anyway, I decided to let off a little bomb this morning by posting the following tweet on Twitter: @mrackley: Can someone be considered a SharePoint Developer if all they know how to do is work in SPD? Now, I knew this is a debate that has been going on since the first SharePoint Designer User put SharePoint Developer on their resume. There are probably several blogs out there on the subject, but with the wildfire that is jQuery and a few other new features out there I believe it is an important subject to tackle again. I got a lot of great feedback as well on Twitter. The entire twitter conversation is at the end of this blog posting. Thanks everyone for their opinions. Who cares? Why does it matter? Can’t we all just get along? Yes it matters… everything must be labeled and put in it’s proper place. Pigeon holing is the only way to go!  Just kidding.. I’m not near that anal, but yes! It is important to be able to properly identify the skill set of those people on your team and correctly identify the role you are wanting to hire. Saying you are a “SharePoint Developer” is just too vague and just barely begins to answer the question. Also, knowing who’s on your team and what they can do will ensure you give your clients the best people for the job. A Developer writes code right? So, a Developer uses Visual Studio! Whoa, hold on there Sparky. Even if I concede that to be a developer you have to write code then you still can’t say a SharePoint Developer has to use Visual Studio.  So, you can spell C#, how well can you write XSLT? How’s your jQuery? Sorry bud, that’s code whether you like it or not. There are many ways to write code in SharePoint that have nothing to do with cracking open Visual Studio. So, what are the different ways to develop in SharePoint then? How many different ways can you “develop” in SharePoint?? A lot… Out of the box features In SharePoint you can create a site, create a custom list on that site, do basic calculations in a calculated column, set up alerts, and add all sorts of web parts to a page. Let’s face it.. that IS development! javaScript/jQuery Perhaps you’ve heard by now about this thing called jQuery? It’s all over the place and the answer to a lot of people’s prayers. However be careful, with great power comes great responsibility. Remember, javaScript is executed on the client side and if you abuse it your performance could be affected. Also, Marc Anderson (@sympmarc) wrote a pretty awesome javaScript library called SPServices.  This allows you to access SharePoint’s Web Services using jQuery. How freakin cool is that? With these tools at your disposal the number of things you CAN’T do without Visual Studio grows smaller and smaller. This is definitely development no matter what anyone else says and there is no Visual Studio involved. SharePoint Designer Ahhh.. The cause of and the answer to all of your SharePoint development problems. With SharePoint Designer you can use DataView Web Parts, develop (there’s that word again) your branding, and even connect to external datasources.  There’s a lot you can do in SharePoint Designer. It’s got it’s shortcomings, but it is an invaluable tool in the SharePoint developers toolbox. InfoPath So, can InfoPath development really be considered SharePoint development? I would say yes. You can connect to SharePoint lists, populate fields in a SharePoint list, and even write code in InfoPath. Sounds like SharePoint development to me. Visual Studio – Web Services/WCF So, get this. You can write code for SharePoint and not have a clue what the 12 hive is, what “site actions” means, or know how to do ANYTHING in SharePoint? Poppycock! You say? SharePoint Web Services I say… With SharePoint Web Services you can totally interact with SharePoint without knowing anything about SharePoint. I don’t recommend it of course, but it’s possible. What can you write using SharePoint Web Services? How about a little application called SharePoint Designer? Visual Studio – Object Model And here we are finally:  the SharePoint Object Model.  When you hear “SharePoint Developer” most people think of someone opening Visual Studio and creating a custom web part, workflow, event receiver, etc.. etc.. but I hope that by now I have made the point that this is NOT the only form of SharePoint Development! Again… Who cares? Just crack open Visual Studio for everything! Problem solved! Let’s ponder for a moment, shall we? The business comes to you with a requirement that involves some pretty fancy business calculations, and a complicated view that they do NOT want to look like SharePoint. “No Problem” you proclaim you mighty SharePoint Developer. You go back to your cube, chuckle at the latest Dilbert comic, and crack open Visual Studio. Then you build your custom web part… fight with all the deployment, migration, and UAT that you must go through and proclaim victory two weeks later!!!! Well done my good sir/ma’am! Oh wait… it turns out Sally who is not a “developer” did the exact same thing with a Dataview web part and some jQuery and it’s been in production for two weeks? #CockinessFail I know there are many ASP.NET developers out there that can create a custom control and wrap it to be a SharePoint Web Part.  That does NOT mean they are SharePoint Developers though as far as I’m concerned and I personally would much rather have someone on my team that can manipulate the heck (yes, I said ‘heck’) out of SharePoint using Dataview Web Parts, jQuery, and a roll of duct tape. Just because you know how to write code in Visual Studio does not mean you are a SharePoint Developer. What’s the conclusion here? How do we define ‘it’ and what ‘it’ is called? Fortunately, this is MY blog. I don’t have to give answers, I can stir the pot, laugh and leave you to ponder what it means! There is obviously no right or wrong answer here (unless you disagree with me,then you are flat out wrong). Anyway, there are many opinions.  Here’s mine.  If you put SharePoint Developer on your resume make sure to clearly specify HOW you develop in SharePoint and what tools you use. If we must label these gurus of jQuery and SPD, how about “SharePoint Client Developer” or “SharePoint Front End Developer”? Just throwing out an idea. Whatever we call them, to say they are not developers is short-sighted, arrogant, and unfair. Of course, then we need to figure out what to call all those other SharePoint development types.  Twitter Conversation @next_connect: RT @mrackley: Can someone be considered a SharePoint Developer if all they know how to do is work in SPD? | I say no.... @mikegil:  @mrackley re: yr Developer question: SPD expert <> SP Developer. Can be "sous-developer," though. #SharePoint #SPD @WonderLaura:  Rt @mrackley Can someone be considered a SharePoint Dev if all they know how to do is work in SPD? -- My opinion is that devs write code. @exnav29:  Rt @mrackley Can someone be considered a SharePoint Dev if all they know how to do is work in SPD? => I think devs would use VS as well @ssKevin:  @WonderLaura @mrackley does that mean strictly vb and c# when it comes to #SharePoint ? @jimmywim:  @exnav29 @mrackley nah, I'd say they were a power user. Devs know their way around the 12 hive ;) @sympmarc:  RT @mrackley: Can someone be considered a SharePoint Developer if all they know how to do is work in SPD? -> Fighting words. @sympmarc:  @next_connect @mrackley Besides, we prefer to be called "hacks". ;+) @next_connect:  @sympmarc The important thing is that you don't have to develop code to solve problems and create solutions. @mrackley @mrackley:  @sympmarc @next_connect not tryin to pick fight.. just try and find consensus on definition @usher:  @mrackley I'd still argue that you have a DevLite title that's out there for the collaboration engineers (@sympmarc @next_connect) @next_connect: @usher I agree. I've called it Light Dev/ Configuration before. @sympmarc @mrackley @usher:  @next_connect I like DevLite, low calorie but still same great taste :) @mrackley @sympmarc @mrackley:  @next_connect @usher @sympmarc I don't think there's any "lite" to someone who can bend jQuery and XSLT to their will. @usher:  @mrackley okay, so would you refer to someone that writes user controls and assemblies something different (@next_connect @sympmarc) @usher:  @mrackley when looking for a developer that can write .net code, it's a bit different than an XSLT/jQuery designer. @sympmarc @next_connect @jimmywim:  @mrackley @sympmarc @next_connect I reckon a "dev" does managed code and works in the 12 hive @sympmarc:  @jimmywim @mrackley @next_connect We had a similar debate a few days ago @toddbleeker et al @sympmarc:  @sympmarc @jimmywim @mrackley @next_connect @toddbleeker @stevenmfowler More abt my Middle Tier term, but still connected. Meet bus need. @toddbleeker:  @sympmarc @jimmywim @mrackley @next_connect I used "No Assembly Required" in the past. I also suggested "Supplimenting the SharePoint DOM" @toddbleeker:  @sympmarc @jimmywim @mrackley @next_connect Others suggested Information Worker Solutions/Enhancements @toddbleeker:  @sympmarc @jimmywim @mrackley @next_connect @stevenmfowler I also like "SharePoint Scripting Solutions". All the technologies are script. @jimmywim:  @toddbleeker @sympmarc @mrackley @next_connect I like the IW solutions one... @toddbleeker:  @sympmarc @jimmywim @mrackley @next_connect @stevenmfowler This is like the debate that never ends: it is definitely not called Middle Tier. @jimmywim:  @toddbleeker @sympmarc @mrackley @next_connect @stevenmfowler "Scripting" these days makes me think PowerShell... @sympmarc:  @toddbleeker @jimmywim @mrackley @next_connect @stevenmfowler If it forces a debate on h2 best solve bus probs, I'll keep sayin Middle Tier. @usher:  @sympmarc so we know what we're looking for, we just can't define a name? @toddbleeker @jimmywim @mrackley @next_connect @stevemfowler @sympmarc:  @usher @sympmarc @toddbleeker @jimmywim @mrackley @next_connect @stevemfowler The naming seems to matter more than the substance. :-( @jimmywim:  @sympmarc @usher @toddbleeker @mrackley @next_connect @stevemfowler work brkdn defines tasks, defines tools needed, can then b grp'd by user @WonderLaura:  @mrackley @toddbleeker @jimmywim @sympmarc @usher @next_connect Funny you're asking. @johnrossjr and I spent hours this week on the subject. @stevenmfowler:  RT @toddbleeker: @sympmarc @jimmywim @mrackley @next_connect @stevenmfowler it is definitely not called Middle Tier. < I'm with Todd

    Read the article

  • Why do I need to set up Autologon values in registry twice in before it works and can I fix this?

    - by jJack
    Background: As part an automated testing suite I am building, I need to set up Autologon on my virtual machines 'on demand'. By on demand, I mean that I don't want to necessarily pre-configure my VM or any snapshot to have Autologon set up already, for security reasons and also a huge business case. My solution so far: I'm copying a script to the guest machine and then using Sysinternals PsExec to execute it. The script is: reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultUserName /t REG_SZ /d myusername reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultPassword /t REG_SZ /d myfakepassword reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v DefaultDomainName /t REG_SZ /d mydomain reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v ForceAutoLogon /t REG_SZ /d 1 reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /f /v AutoAdminLogon /t REG_SZ /d 1 reg add "hklm\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\AutoLogonChecked" /f /ve /d 1 Note: I don't believe AutoLogonChecked is required for machines post Windows 2000 but I'm doing it just in case for now. Maybe ForceAutoLogon isn't either, not sure yet. The Problem: I see PsExec executes this properly and all the values are in the registry, however when I restart the machine, the user isn't automatically logged on...When I run this a second time then restart the machine, the user is finally logged on. A diff between the registry states shows that the first time I run this, it is missing both the "1" for AutoAdminLogon, and also the DefaultPassword key. The second time I execute it, these values are correctly intact as I intended. So, what is going on here? Is this expected? This post claims in the end that it really all just works (the problem was that a logoff script was setting off the values). Doesn't seem to work for me however. Note this seems unique to Windows 7, does not occur in Windows XP Also note that you don't need PsExec to recreate the issue - just modify the registry yourself EDIT/update: Login interactively and run script (so, not executing it remotely), logging off automatically logs me back in (so, it works) remotely execute the script in guest when I'm interactively logged in, logging off automatically logs me back in (so, it works) remotely execute the script in guest when with non-interactive session if I log in afterwards (so, interactive now) then back off, it logs me back in (so, it then works) EDIT/update 2: This only occurs for Win7x86, Win7x64, Win8x64. This does not occur for Windows XP

    Read the article

  • layout analysis of text based pdf without ocr

    - by fastrack
    Before recognizing a pdf, OCR software do document layout analysis to determine which parts are texts, tables or images, as shown in the picture below. ![papercrop]http://cache.gawkerassets.com/assets/images/17/2011/07/papercrop.jpg I want to use some parts of the text while leaving out the others. So having a software marking those zones comes in handy. Papercrop does a decent job, but it has a bug of now showing some of the text in the pdf file. And OCR software can also do layout analysis, marking out "zones" which I can add or delete. But you have to OCR to do that. Since my pdfs are already text based, I don't want to waste so much time OCRing. So my question is, is there any software that automatically mark out those zones and let me manually manipulate them, without having to OCR? Thanks! Waiting for your help.

    Read the article

  • ADF Mobile Client is now Generally Available!

    - by joe.huang
    ADF Mobile Client is now generally available!  The press release went out this morning, and the ADF Mobile Client extensions can now be downloaded in the JDeveloper Update Center.  There is also a new Oracle Mobile Computing Strategy White Paper and Data Sheet available, for a high level overview of ADF Mobile. To get started with ADF Mobile Client development, please leverage the following resources: Oracle Technology Network ADF Mobile Landing Page: Review this page for all available resources for ADF Mobile development. Getting Start with ADF Mobile Client Demo: Short demo of the end-to-end development process. Tutorial for Mobile Application Development using ADF Mobile Client ADF Mobile Client Developer Guide ADF Mobile Client Samples: available in the JDeveloper Extension itself.  Located in <JDeveloper Install Location>/jdev/extensions/oracle.adfnmc.core/Samples directory.  Blogs will follow, describing each of the sample applications in more detail. Oracle Database Mobile Server: If database synchronization is needed, please follow this link to download/install Mobile Server. Leverage JDeveloper Forum for any ADF Mobile related questions. You will need the latest (11g Patch Set 3, or 11.1.1.4.0) version of JDeveloper to use this extension.  To download the ADF Mobile Client extension in JDeveloper, you would go to Help Menu, select “Check For Update”, and look for ADF Mobile Client extension in the Official Oracle Extensions and Updates center.  You can also directly download the extension from Oracle Technology Network. Check it out!  For any issues with accessing any of the links above, please contact me directly. Thanks, Joe Huang ([email protected])

    Read the article

  • Mission critical embedded language

    - by Moe
    Maybe the question sounds a bit strange, so i'll explain a the background a little bit. Currently i'm working on a project at y university, which will be a complete on-board software for an satellite. The system is programmed in c++ on top of a real-time operating system. However, some subsystems like the attitude control system and the fault detection and a space simulation are currently only implemented in Matlab/Simulink, to prototype the algorithms efficiently. After their verification, they will be translated into c++. The complete on-board software grew very complex, and only a handful people know the whole system. Furthermore, many of the students haven't program in c++ yet and the manual memory management of c++ makes it even more difficult to write mission critical software. Of course the main system has to be implemented in c++, but i asked myself if it's maybe possible to use an embedded language to implement the subsystem which are currently written in Matlab. This embedded language should feature: static/strong typing and compiler checks to minimize runtime errors small memory usage, and relative fast runtime attitude control algorithms are mainly numerical computations, so a good numeric support would be nice maybe some sort of functional programming feature, matlab/simulink encourage you to use it too I googled a bit, but only found Lua. It looks nice, but i would not use it in mission critical software. Have you ever encountered a situation like this, or do you know any language, which could satisfies the conditions? EDIT: To clarify some things: embedded means it should be able to embed the language into the existing c++ environment. So no compiled languages like Ada or Haskell ;)

    Read the article

  • Virtual Windows desktop

    - by Zack
    Is there any virtual desktop software that can virtualize desktop just like a virtual desktop to sandbox (sort of like virtualization and sandbox combined). I want to create many desktop and each of them must be sandbox. For example if I have virus infected in one of the desktop, I just have to clear or close the desktop and everything is fine. Is there any software that can do that kind of jobs that I have mentioned? Remember I am not asking recommendation of software, but the software that can do the job. UPDATE: I mean that every virtual desktop is working as a virtual box or sandbox. Clearing or closing the desktop will work as shutting down that virtual box.

    Read the article

  • How to fix Failed to initialize Windows Azure storage emulator error

    - by ybbest
    When you press F5 to start debugging Azure project, you might get the following exception: If you go to the Output windows, you will see the detailed error message below: Windows Azure Tools: Failed to initialize Windows Azure storage emulator. Unable to start Development Storage. Failed to start Development Storage: the SQL Server instance ‘localhost\SQLExpress’ could not be found. Please configure the SQL Server instance for Development Storage using the ‘DSInit’ utility in the Windows Azure SDK. This is because by default, Azure uses the SQLExpress to start Development Storage. To fix this you can do the following: You need to open command prompt, and navigate to C:\Program Files\Windows Azure SDK\v1.4\bin\devstore (depending on your Azure version, the file path is slightly different.) Next, run DSInit /sqlInstance:. (. Means the SQL Server use the default instance, if you have name instance, you need to change. to the name of the SQL Server) After a short while, you should see the following windows showing the configuration succeeds. You can download a batch file here. References: http://msdn.microsoft.com/en-us/library/gg433132.aspx

    Read the article

  • ISP doesn't allow incoming connections (i.e., hosting a server) - anyway to get around this using a VPN?

    - by Josh1billion
    My ISP, like many today, doesn't allow incoming connections, so if I try to host server software on my home PC, then anyone (even myself) trying to connect to that server software via my public IP address is not able to establish a connection. This becomes a problem because hosting online games is impossible. I do have a VPS Linux box rented; is there any VPN software I could install on it that I could connect to from my home PC, and then anyone connecting to a specific port on that VPS will just have the traffic tunneled to my home PC, allowing me to host games that way? If so, what software do I need (on both my PC and on the VPS), and how do I configure it?

    Read the article

  • Is this information about me as a programmer concise and good enough?

    - by Nick Rosencrantz
    I not only want you to review my resume but please tell me what you think Google means when they answered me: "We don't look at personal letters and we like your resume and we can recommend you internally but we need measurable experience. What is meant with "measurable" here? Do they mean like O(1) compared to O(n), selling an entire company, grades or what? This is what I sent: Curriculum vitae Nick Rosencrantz Competence: System development, web development Technical competence: Java, Javascript, HTML, XML, CSS, AJAX, PHP, SQL, Python Employments: 2012- Mobile Innovation AB System Developer IT consultant (Java programmer) 2011-2012 Bnano International Ltd System Developer Python programming in Google App Engine 2008-2009 Sweden Island AB System Developer Programming C++ and Java EE components 2003-2007 Studies Stockholm School of Economics During studies worked as network technician at Effnet AB 2000-2002 Jadestone AB System Developer System development in Java/J2EE. In 2001: KTH, Assistant. Teaching application server programming in Java Enterprise + weblogic + Informix. 1999-2000 Studies KTH 1996-1998 Spray.se System development, Researcher 1995-1995 Finance broker Backoffice work with financial instruments 1993-1994 Computer & Audio-Technical Systems AB Programming, sommer job Education/Courses: Stockholm School of Economics, Master of Science diploma, KTH, Computer Science undergraduate studies Languages Swedish, English, also some German and French Born 1973, Swedish citizen I also have a project-based CS which is several pages long but the above is about what I was aiming for in the beginning when I was looking for a job, now I have employment as an IT consultant in central Stockholm and I want to make my resume concise and also know what Google meant with their answer (It was a Swedish Google employee that via linkedin recruited from my Stockholm School of Economics groups since that is a small elite economics school where I took my M.Sc. and KTH is one of the largest universities in northern Europe so I sent her a link with my CV and she said she could promote me internally if I added "measurable experience" and I've been thinking for weeks what that may mean?

    Read the article

  • How to make a 100% UNIQUE dvd? [closed]

    - by sajawikio
    Is it possible to make a DVD which would be next to impossible to replicate exactly even with special equipment? To be clear, not in the sense of making the data itself resistant to piracy - nothing like that. More like as an analogy to antiques - a reproduction of a furniture would be able to be spotted to a trained eye, that it is not the original. Is it possible to do this for a dvd? Like, say a dvd is copied, even by someone who is trying to use even special equipment and is hypothetically dying to copy the dvd exactly for whatever reason - even such copied dvd would be detectable that it is not exactly the original dvd somehow (as if it were a reproduction of an original antique, but not the original), and would be almost or even preferably impossible to actually copy 100% exact the dvd ever again. Just some ideas below on the sort of thing i might go about doing to do this, but really am not sure how or what programs, media, hardware, etc. would do the trick Not sure what would do the trick -- but for instance do there exist any blank dvd's that already come pre-recorded with some sort of serial number or bar code, or other metadata, or an encrypted hash, or something like that? Maybe any blank dvd will do but i should get a special software to extract hardcoded metadata? If so which software? Or special hardware even maybe? Such dvd which the "secret" can be: Well, to know what the "secret" is and if it is present on the disk, it probably should be readable by some software or maybe a particular hardware (i guess preferably only if some sort of key is known and input into the software, even better, only then such secret data on disk can be read, otherwise nothing shows up and it looks like just a regular disk with no secret on it), and Would be impossible to actually replicate, especially not with regular burning hardware and preferably not at all. Other idea: Is there any special software that can direct the write head of laser to physically "mar" the dvd in such a way that, when played in dvd player, makes a particular visual pattern or something like that, also say the mar itself shows up as faint scratch on disk, but would be impossible for someone to do themselves exactly? EDIT: Also to clarify suppose the dvd contains video and music that should be playable on dvd players, maybe a menu too (i.e not a dvd containing software), and also to clarify the question is about how to make dvd 100% unique, not how to make the actual content of dvd protected from "piracy".

    Read the article

  • Create Hidden Partition on USB

    - by Francesco
    I need to split an USB flash disk into two USB drives, each one with its own drive letter, but one of these has to be hidden. In the non-hidden partition I want to place my software, and in the hidden partition I need to place some files that are required by the software in order to work. Moreover, only the software may read, write, delete or execute the files in this partition. I thought to use a little partition viewed as a CD-ROM drive, as they do in many flash drives, but this solution does not allow to write other data in a second moment, and it's visible to the user that can read the file. Obviously the software must be able to access to partition and read, write, delete or execute the content. Is there a solution to do so, possibly that work also on Linux?

    Read the article

  • Log and Block Website using Windows 2008 SBS

    - by John
    A client has asked me to setup Windows 2008 SBS to block and log websites from a list they will provide. As far as I know they only have standard edition which means I cannot use ISA. I was thinking of using squid authenticated against Active Directory. There is no budge for additional software. Does any one know of a different/better solution using either open source software or software that is available in Windows 2008 SBS? Thanks

    Read the article

  • Why the huge difference between etch and lenny MySQL

    - by rmarimon
    I've been working on a program for the last year. The development environment is working with a database in MySQL running on debian etch version mysql Ver 14.12 Distrib 5.0.32, for pc-linux-gnu (i486) using readline 5.2. The production environment is working on debian lenny with version mysql Ver 14.12 Distrib 5.0.51a, for debian-linux-gnu (i486) using readline 5.2. I was just timing some database access and what takes in the development environment 150 seconds, takes 300 in the production environment. I checked the /etc/mysql/my.cnf files on both systems and the only differences are # development bind-address = 10.168.1.82 log_bin = /var/log/mysql/mysql-bin.log # production bind-address = 127.0.0.1 myisam-recover = BACKUP #log_bin = /var/log/mysql/mysql-bin.log I dump a database from the production and load it into the development and with the same server everything takes half the time !!! What should I check?

    Read the article

  • Writing to XML issue Unity3D C#

    - by N0xus
    I'm trying to create a tool using Unity to generate an XML file for use in another project. Now, please, before someone suggests I do it in something, the reason I am using Unity is that it allows me to easily port this to an iPad or other device with next to no extra development. So please. Don't suggest to use something else. At the moment, I am using the following code to write to my XML file. public void WriteXMLFile() { string _filePath = Application.dataPath + @"/Data/HV_DarkRideSettings.xml"; XmlDocument _xmlDoc = new XmlDocument(); if (File.Exists(_filePath)) { _xmlDoc.Load(_filePath); XmlNode rootNode = _xmlDoc.CreateElement("Settings"); // _xmlDoc.AppendChild(rootNode); rootNode.RemoveAll(); XmlElement _cornerNode = _xmlDoc.CreateElement("Screen_Corners"); _xmlDoc.DocumentElement.PrependChild(_cornerNode); #region Top Left Corners XYZ Values // indent top left corner value to screen corners XmlElement _topLeftNode = _xmlDoc.CreateElement("Top_Left"); _cornerNode.AppendChild(_topLeftNode); // set the XYZ of the top left values XmlElement _topLeftXNode = _xmlDoc.CreateElement("TopLeftX"); XmlElement _topLeftYNode = _xmlDoc.CreateElement("TopLeftY"); XmlElement _topLeftZNode = _xmlDoc.CreateElement("TopLeftZ"); // indent these values to the top_left value in XML _topLeftNode.AppendChild(_topLeftXNode); _topLeftNode.AppendChild(_topLeftYNode); _topLeftNode.AppendChild(_topLeftZNode); #endregion #region Bottom Left Corners XYZ Values // indent top left corner value to screen corners XmlElement _bottomLeftNode = _xmlDoc.CreateElement("Bottom_Left"); _cornerNode.AppendChild(_bottomLeftNode); // set the XYZ of the top left values XmlElement _bottomLeftXNode = _xmlDoc.CreateElement("BottomLeftX"); XmlElement _bottomLeftYNode = _xmlDoc.CreateElement("BottomLeftY"); XmlElement _bottomLeftZNode = _xmlDoc.CreateElement("BottomLeftZ"); // indent these values to the top_left value in XML _bottomLeftNode.AppendChild(_bottomLeftXNode); _bottomLeftNode.AppendChild(_bottomLeftYNode); _bottomLeftNode.AppendChild(_bottomLeftZNode); #endregion #region Bottom Left Corners XYZ Values // indent top left corner value to screen corners XmlElement _bottomRightNode = _xmlDoc.CreateElement("Bottom_Right"); _cornerNode.AppendChild(_bottomRightNode); // set the XYZ of the top left values XmlElement _bottomRightXNode = _xmlDoc.CreateElement("BottomRightX"); XmlElement _bottomRightYNode = _xmlDoc.CreateElement("BottomRightY"); XmlElement _bottomRightZNode = _xmlDoc.CreateElement("BottomRightZ"); // indent these values to the top_left value in XML _bottomRightNode.AppendChild(_bottomRightXNode); _bottomRightNode.AppendChild(_bottomRightYNode); _bottomRightNode.AppendChild(_bottomRightZNode); #endregion _xmlDoc.Save(_filePath); } } This generates the following XML file: <Settings> <Screen_Corners> <Top_Left> <TopLeftX /> <TopLeftY /> <TopLeftZ /> </Top_Left> <Bottom_Left> <BottomLeftX /> <BottomLeftY /> <BottomLeftZ /> </Bottom_Left> <Bottom_Right> <BottomRightX /> <BottomRightY /> <BottomRightZ /> </Bottom_Right> </Screen_Corners> </Settings> Which is exactly what I want. However, each time I press the button that has the WriteXMLFile() method attached to it, it's write the entire lot again. Like so: <Settings> <Screen_Corners> <Top_Left> <TopLeftX /> <TopLeftY /> <TopLeftZ /> </Top_Left> <Bottom_Left> <BottomLeftX /> <BottomLeftY /> <BottomLeftZ /> </Bottom_Left> <Bottom_Right> <BottomRightX /> <BottomRightY /> <BottomRightZ /> </Bottom_Right> </Screen_Corners> <Screen_Corners> <Top_Left> <TopLeftX /> <TopLeftY /> <TopLeftZ /> </Top_Left> <Bottom_Left> <BottomLeftX /> <BottomLeftY /> <BottomLeftZ /> </Bottom_Left> <Bottom_Right> <BottomRightX /> <BottomRightY /> <BottomRightZ /> </Bottom_Right> </Screen_Corners> <Screen_Corners> <Top_Left> <TopLeftX /> <TopLeftY /> <TopLeftZ /> </Top_Left> <Bottom_Left> <BottomLeftX /> <BottomLeftY /> <BottomLeftZ /> </Bottom_Left> <Bottom_Right> <BottomRightX /> <BottomRightY /> <BottomRightZ /> </Bottom_Right> </Screen_Corners> </Settings> Now, I've written XML files before using winforms, and the WriteXMLFile function is exactly the same. However, in my winform, no matter how much I press the WriteXMLFile button, it doesn't write the whole lot again. Is there something that I'm doing wrong or should change to stop this from happening?

    Read the article

  • ORACLE is WEB 2.0

    - by anca.rosu
    You never know what to expect in life, where it can take you and what kind of fulfillment it can offer you. It’s just like an amazing lottery with millions of winning tickets. My name is Paula, I am an Online Marketing Specialist at Oracle University and this is my story. Having graduated from a technical profile college, it seemed almost normal to follow the same career path. But I said no. I wanted to try something else, so I took an Advertising Masters Program and I really became in love with this entire industry. Advertising and the new impact of the Internet through social networking is my current fascination. I knew I had to work to incorporate both my skills intro one dream job. I want to believe that I have come to work at Oracle as part of a great plan that life has for me. It’s not the most glamorous job in advertising or in the fashion industry, but it’s everything you need to start investing in your development and to build relationships. A normal day at work begins at 9.30 at our Oracle Office in Bucharest. After a short chit-chat, coffee and some conference calls, marketing gets to work! Some of the members of my team are working besides me but others are based all over Europe. This is extremely useful when coordinating the EMEA Marketing for Oracle University, because this way it’s easier to keep an eye on these various locations. Even though it’s a team play, you need to speak up and make your mark. I am the kind of person that never stands-by and waits to be given directions, I am curious and intuitive. This makes things easier. In Oracle you really need to find your own way and to discover how to organize your time and how to get involved with people. People to people, this is the focus. But everything is up to you and it strongly depends on the type of personality that you have. I try to get involved in various activities, participate in Oracle Days Events, interact and meet all kinds of people. For those who are newly graduates or interns, Oracle has lots of trainings and webcasts you can attend to help you develop your career shape and to understand better the way the business works. You can also be awarded for ideas and setting the trends so that makes it worth it. What I like most about my job is the fact that I can come with ideas and bring them to life. For example Oracle University has a special seminar program called “Celebrity Seminars” where top industry speakers teach 1-day or 2-day condensed seminars. We thought of creating something exclusive and a video was the best idea. So my colleague and I became reporters for a day and interviewed this well-known speaker regarding his seminar. I think this is a good way to market this business. Live footage is a very good marketing tool so we are planning to use the video to target our online audiences via Facebook, Twitter or LinkedIn. This can even go in the newsletters that marketing sends regarding the Celebrity Seminars. This is what I meant when I said Oracle is a free spirited organization and you can surely find your place here among us. The best way to describe my job is WEB 2.0. The modern online approach comes to life while we are trying to sell our business. We need to be out there and we are responsible of spreading the buzz regarding our training offerings and our official courseware materials. There are so many new ways to interact with the target audience nowadays and I am so eager to discover the best online techniques! If you have any questions related to this article feel free to contact  [email protected].  You can find our job opportunities via http://campus.oracle.com Technorati Tags: WEB 2.0,Online Marketing,Oracle University,Bucharest,events,graduates,interns,training,webcast,seminar,newsletters,business,Facebook,Twitter,LinkedIn

    Read the article

  • Why does Process Explorer cause highly targeted failure of some applications / basic UI functions in a high-power EC2 Windows instance?

    - by Dan Nissenbaum
    Update: I have determined that Process Explorer itself - the program I am using to debug a performance issue - seems to be the cause of the issue. See note, with updated question, at end. I am running a high-power (cc2.8xlarge) Amazon AWS EC2 Windows instance off of a boot EBS volume, provisioned at 2500 PIOPS, which was created from a snapshot of a previous boot volume. My purpose with the instance is to use it as a development workstation with many developer tools installed, such as Visual Studio, a local XAMPP stack, etc. I have upwards of 40 programs installed on the machine. The usability of the instance as a development machine often works quite well. The RDP lag is adequately small. I have used it for hours on end without problems for some of my most intense development tasks. As a result, I have just purchased a reserved instance, and I opted to rebuild my development machine starting from scratch with a Windows Server 2012 AMI. After having installed all of my desired/required applications for development over this past week, again the machine seems to often work well and I have worked for up to an hour at a time without problems doing heavy development work. However, I continue to run into catastrophic OS usability issues that may prevent me from being able to rely on this machine as a development machine. I would like to track down the source of the problem, if there is an easily identifiable source. (Update: I have tracked down the source to be Process Explorer, the very program I was using to debug the problem. See update at end.) The issues are as follows. (These are some primary examples) Some applications, after a period of adequate responsiveness, suddenly begin to respond very, very slowly to basic user interface actions such as clicking on menus and pressing Ctrl-Tab to switch between open documents. Two examples are UltraEdit and PhpEd. It typically takes ~2 seconds for a menu to appear, and ~4 seconds to switch between open documents. Additionally, insertion point motion in the editor is lagged by upwards of ~2 seconds. Process Explorer, which I am using to help debug the problem, seems to run acceptably for a couple of minutes, but on multiple occasions Process Explorer itself hangs completely. It hangs at the same time as the problems noted above. When it hangs, it is 100% unresponsive. Clicking on its taskbar icon neither causes it to come to the top or go behind, and its viewable area is filled with nothing but a region partially containing pure white and partially containing incomplete windows widgets that are unreadable, and that never change. Waiting 10 minutes does not clear the problem. Attempting to force-quit Process Explorer by right-clicking on its taskbar icon and choosing "Close Window" takes about 5 full minutes to exit (Process Explorer itself can't be used to exit Process Explorer, and it is registered as a Task Manager substitute). Other programs work just fine during this time. For example, Chrome tabs flip very quickly back and forth, menus pop open instantly, web pages load quickly, and typing in forms/web applications inside the browser works promptly. Another example of an application that works crisply is Filemaker - its menus open instantly, and switching views in this application occurs promptly. Other applications also work without issue. Also, switching between applications occurs promptly as well. It is only a handful of applications that exhibit the problem, with some primary examples given above. At first I thought that EBS IOPS might be a problem. Therefore, I ran Performance Monitor, and watched the "Disk Transfers/sec" monitor in real time. At no point did this measure come anywhere close to hitting the 2500 PIOPS provisioned for the EBS volume. The RAM was also well under the limit (~10 GB used out of 60 GB). I did notice that one CPU core (out of 32 logical cores) was fully thrashing at 100% (i.e., ~3.1%) during the problematic periods. This seems to indicate that a single CPU core is handling the menus / flipping between open documents (for some applications only) / managing the Process Explorer user interface, and that this single core was hosed for some reason during the problematic periods. Also note that I have a desktop workstation (Windows 7) that I also use as a development machine, via a remote connection, with a nearly identical set of programs installed, and this desktop workstation does not exhibit any of the problems I've discussed above. I have been using it heavily for well over a year now. Any suggestions regarding either the source of the problem, or steps I might take to investigate the source of the problem, would be appreciated. Thanks. Note: After extensive testing & investigation, I have noticed that when I quit Process Explorer, the problem vanishes and the system performance returns to normal, and then reappears quickly when I run Process Explorer again (note: again, the performance problems only appear for a subset of applications - other applications work perfectly fine during the same period). My question is therefore (thankfully) more specific: Why does Process Explorer cause highly targeted failure of some applications (including itself) and basic UI functions, in a high-power EC2 Windows instance?

    Read the article

  • The king is dead, long live the king&ndash;Cloud Evening 15th Feb in London

    - by Eric Nelson
    Advert alert :-) The UK's only Cloud user group The Cloud is the hot topic. You can’t escape hearing about it everywhere you go. Cloud Evening is the UK’s only cloud-focussed user group. Cloud Evening replaces UKAzureNet, with a new objective to cover all aspects of Cloud Computing, across all platforms, technologies and providers. We want to create a community for developers and architects to come together, learn, share stories and share experiences. Each event we’ll bring you two speakers talking about what’s hot in the world of Cloud. Our first event was a great success and we're now having the second exciting instalment. We're covering running third party applications on Azure and federated identity management. We will, of course, keep you fed and watered with beer and pizza. Spaces are limited so please sign-up now! Agenda 6.00pm – Registration 6.30pm – Windows Azure and running third-party software - using Elevated Privileges, Full IIS or VM Roles  (by @MarkRendle): We all know how simple it is to run your own applications on Azure, but how about existing software? Using the RavenDB document database software as an example, Mark will look at three ways to get 3rd-party software running on Azure, including the use of Start-up Tasks, Full IIS support and VM Roles, with a discussion of the pros and cons of each approach. 7.30pm – Beer and Pizza. 8.00pm – Federated identity – integrating Active Directory with Azure-based apps and Office 365  (by Steve Plank): Steve will cover off how to write great applications which leverage your existing on-premises Active Directory, along with providing seamless access to Office 365. We hope you can join us for what looks set to be a great evening. Register now

    Read the article

  • Estimating cost of labor for a controlled experiment

    - by Lorin Hochstein
    Let's say you are a software engineering researcher and you are designing a controlled experiment to compare two software technologies or techniques (e.g., TDD vs. non-TDD, Python vs. Go) with respect to some qualities of interest (e.g., quality of resulting code, programmer productivity). According to your study design, participants will work alone to implement a non-trivial software system. You estimate it should take about six months for a single programmer to complete the task. You also estimate via power analysis that you will need around sixty study participants to obtain statistically significant results, assuming the technologies actually do yield different outcomes. To maximize external validity, you want to use professional programmers as study participants. Unfortunately, it isn't possible to find professional programmers who can volunteer for several months to work full-time on implementing a software system. You decide to go the simplest route and contract with a large IT consulting firm to obtain access to programmers to participate in the study. What is a reasonable estimate of the cost range, per person-month, for the programming labor? Assume you are constrained to work with a U.S.-based firm, but it doesn't matter where in the U.S. the firm itself or the programmers or located. Note: I'm looking for a reasonable order-of-magnitude range suitable for back-of-the-envelope calculations so that when people say "Why doesn't somebody just do a study to measure X", I can say, "Because running that study properly would cost $Y", and have a reasonable argument for the value of $Y.

    Read the article

  • Upgrade Windows 7 to Windows 8 using Technet?

    - by WillyWonka
    I want to go get a TechNet subscription to test some Windows software before I buy it. I want to replicate upgrading Windows 7 to Windows 8 with specific software in a virtual machine then see how stable or if possible to do it at all. I looked at the list of software but they only show Windows 8 Pro or Enterprise. Do you know if there is an Windows 7 to 8 Upgrade ISO available for Technet Standard or Pro?

    Read the article

  • Sandboxie or VHD for virtual environment?

    - by lucian.jp
    I am looking for advices about creating virtual development environment. Is it better to have a base VHD file with differential VHD for stable development environment and another differential VHD file for beta development environment or should I install Sandboxie 64-bit and install both environment in different sandbox? I am concern about windows services and shortcuts with the sandbox. Current OS : Windows 7 64-bit

    Read the article

  • Collaboration using github and testing the code

    - by wyred
    The procedure in my team is that we all commit our code to the same development branch. We have a test server that runs updated code from this branch so that we can test our code on the servers. The problem is that if we want to merge the development branch to the master branch in order to publish new features to our production servers, some features that may not have been ready will be applied to the production servers. So we're considering having each developer work on a feature/topic branch where each of them work on their own features and when it's ready, merge it into the development branch for testing, and then into the master branch. However, because our test server only pulls changes from the development branch, the developers are unable to test their features. While this is not a huge issue as they can test it on their local machine, the only problem I foresee is if we want to test callbacks from third-party services like sendgrid (where you specify a url for sendgrid to update you on the status of emails sent out). How to handle this problem? Note: We're not advanced git users. We use the Github app for MacOSX and Windows to commit our work.

    Read the article

  • XAMPP pointing a file outside root folder

    - by Ravi
    I am using XAMPP for first time in Mac. Running out problems accessing other than root folder(htdocs).when I am placing my web application inside htdocs with default httpd.conf file it works when I try to point my web application url in httpd.conf it throws error I am aware that to modify the root folder I need to do changes to my XAMPP/etc/httpd.conf file With Default XAMPP MAC Settings, I am trying to change Server root,Document root and Directory in XAMPP/etc/httpd.conf file the following ServerRoot "/Users/ravi/Documents/Development/Backbone/backboneboilerplate" DocumentRoot "/Users/ravi/Documents/Development/Backbone/backboneboilerplate" <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow Deny from all </Directory> <Directory "/Users/ravi/Documents/Development/Backbone/backboneboilerplate"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> its throwing error when trying to start XAMPP httpd: Syntax error on line 54 of /Applications/XAMPP/xamppfiles/etc/httpd.conf: Cannot load /Users/ravi/Documents/Development/Backbone/backboneboilerplate/modules/mod_authn_file.so into server: cannot create object file image or add library

    Read the article

  • #altnetseattle &ndash; Collaboration, Why is it so hard!

    - by GeekAgilistMercenary
    The session convened and we began a discussion about why collaboration is so hard. To work together in software better us engineers have to overcome traditional software approaches (silos of work) and the human element of tending to go off in a corner to work through an issue. It was agreed upon that software engineers are jack asses of jack assery. Breaking down the stoic & silent types by presenting a continuous enthusiasm until the stoic and silent types break down and open up to the group.  Knowing it is ok to ask the dumb question or work through basic things once in a while. Non-work interactions are pivotal to work related collaboration. Collaboration is mostly autonomous of process (i.e. Agile or Waterfall) Latency time should be minimal in the feedback loop for software development. Collaboration is enhanced by Agile Ideals, and things like Scrum or Lean Process. Agile is not a process, Lean and Scrum are process.  Agile is an ideal. Lean, Agile, Scrum, Waterfall, Six Sigma, CMMI, oh dear. . . Great session.  Off to the next session and more brain crunching. . . weeeeeeee!

    Read the article

  • Can't complete dropbox installation from behind proxy

    - by Mark Jones
    Problem: My PC on campus sits behind a proxy (requiring authentication) and I can't setup Dropbox. I am convinced that this is a proxy issue as I can't setup Ubuntu one either (but I don't use Ubuntu One so that is not a problem). I have looked at the Ubuntu One fix but it seems to be to modify settings explicitly related to Ubuntu One. I can install the nautilus-dropbox package (compiled from source and from .deb package from website and from software centre) but once I click OK from the "Dropbox Installation" dialog box (prompting me to download the proprietary daemon) the installation just freezes with the OK button pressed. When I look at its process in System Monitor its waiting channel is inet_wait_for_connect. I have set the following proxy directives thus far: Added mj22:**@proxy.waikato.ac.nz:80 information to network proxy settings under network in settings. Added http_host and http_port variables under gconf-editor-system-proxy Added 'host', 'authentication_password' 'authentication_user' and ticked 'user authentication' and 'use_http_proxy' under gconf-editor-system-http_proxy Added export http_proxy="http://mj22:**@proxy.waikato.ac.nz:80/" to /etc/bash.bashrc Added Acquire::http::proxy "http://mj22:**@proxy.waikato.ac.nz:80/"; to /etc/apt/apt.conf (which is what I imagine is letting Software Center retrieve packages). (where ** is my password) I have also added the equivalent ftp and https lines for the above entries. I get the internet fine and Software Centre can download packages but thats it. Related issues: The software centre can't fetch reviews (but can download packages). When trying to add an online account in Gnome 3 a dialog pop up appears with "Error getting a Request Token: Cannot connect to proxy (proxy.waikato.ac.nz)" Updates: After some time (10mins ish) Dropbox shows an error dialog box that reads: Trouble connecting to Dropbox servers. Maybe your internet connection is down, or you need to set you http_proxy environment variable. Is there a way I can see what environment variables are currently set?

    Read the article

  • How to keep word document, html and pdf documentation aligned

    - by dendini
    Is there a way to write documentation in a WYSIWYG editor which can then export into HTML, WORD and PDF and keep copies synchronized? This documentation are mostly technical notes and some contextual help for some softwares so they must contain images and some styling, they are not programmer's documentation (API list or functions list) for which probably a program like Javadoc or Doxygen would be the best choice. For example how do companies with hundreds different software lines and thousands of programmers deal with this? I have several solutions but they all seem lacking in some aspect: Latex/Tex : very good pdf and html export, not very user friendly and no full-blown WYSIWYG editor available. LibreOffice/OpenOffice : full blown WYSIWYG editor however html export not so good (need to edit manually exported html which needs to be maintained separately ) Mediawiki or any other wiki : could be keeping documentation in wikitext format, so html is automatically generated, pdf exportation is quite good with many available plugins. Again however need some formation for the staff to use it and need to setup a server for this. Notice I'm not asking for software A vs software B, I'm asking for general advice, big companies procedures for documentation and yes some software product names if available.

    Read the article

< Previous Page | 507 508 509 510 511 512 513 514 515 516 517 518  | Next Page >