Search Results

Search found 21301 results on 853 pages for 'duplicate values'.

Page 512/853 | < Previous Page | 508 509 510 511 512 513 514 515 516 517 518 519  | Next Page >

  • Are specific types still necessary?

    - by MKO
    One thing that occurred to me the other day, are specific types still necessary or a legacy that is holding us back. What I mean is: do we really need short, int, long, bigint etc etc. I understand the reasoning, variables/objects are kept in memory, memory needs to be allocated and therefore we need to know how big a variable can be. But really, shouldn't a modern programming language be able to handle "adaptive types", ie, if something is only ever allocated in the shortint range it uses fewer bytes, and if something is suddenly allocated a very big number the memory is allocated accordinly for that particular instance. Float, real and double's are a bit trickier since the type depends on what precision you need. Strings should however be able to take upp less memory in many instances (in .Net) where mostly ascii is used buth strings always take up double the memory because of unicode encoding. One argument for specific types might be that it's part of the specification, ie for example a variable should not be able to be bigger than a certain value so we set it to shortint. But why not have type constraints instead? It would be much more flexible and powerful to be able to set permissible ranges and values on variables (and properties). I realize the immense problem in revamping the type architecture since it's so tightly integrated with underlying hardware and things like serialization might become tricky indeed. But from a programming perspective it should be great no?

    Read the article

  • Enterprise Portal Issue with the Ax Demo VPCs

    - by ssmantha
    Microsoft’s Ax Demo VPC is basically configured for a static IP address 192.168.0.1, this is due to the fact that the VPC has Domain Controlller configured in it which requires a static IP. When we put this VPC on a network with a different subnet and change the IP you can observer that the site http://sharepoint and http://sharepoint/EP cease to function and show “Page Not Found” errors in the browser. This is mainly due to the DNS configuration which is not updated. Below is the screen shot of the changes that needs to be done to make the site functioning properly. Change the following entries in the Forward Lookup Zones of DNS management: These websites default, SharePoint and projectserver are all mapped to a single port in the IIS i.e. port number 80. These websites are recognised with host headers. These host headers are configured in DNS with incorrect IP address entries in DNS when you change the IP address of the VPC. Just change these values to point to the Local Loop Adapter (127.0.0.1) and change the DNS to point to this address in the TCP/IP properties as shown below: This will resolve the issue with the website rendering. Initially you may get time out errors while browsing these website. be patient and try again this would work.

    Read the article

  • Use decorator and factory together to extend objects?

    - by TheClue
    I'm new to OOP and design pattern. I've a simple app that handles the generation of Tables, Columns (that belong to Table), Rows (that belong to Column) and Values (that belong to Rows). Each of these object can have a collection of Property, which is in turn defined as an enum. They are all interfaces: I used factories to get concrete instances of these products, depending on circumnstances. Now I'm facing the problem of extending these classes. Let's say I need another product called "SpecialTable" which in turn has some special properties or new methods like 'getSomethingSpecial' or an extended set of Property. The only way is to extend/specialize all my elements (ie. build a SpecialTableFactory, a SpecialTable interface and a SpecialTableImpl concrete)? What to do if, let's say, I plan to use standard methods like addRow(Column column, String name) that doesn't need to be specialized? I don't like the idea to inherit factories and interfaces, but since SpecialTable has more methods than Table i guess it cannot share the same factory. Am I wrong? Another question: if I need to define product properties at run time (a Table that is upgraded to SpecialTable at runtime), i guess i should use a decorator. Is it possible (and how) to combine both factory and decorator design? Is it better to use a State or Strategy pattern, instead?

    Read the article

  • Advice on reconciling discordant data

    - by Justin
    Let me support my question with a quick scenario. We're writing an app for family meal planning. We'll produce daily plans with a target calorie goal and meals to achieve it for our nuclear family. Our calorie goal will be calculated for each person from their attributes (gender, age, weight, activity level). The weight attribute is the simplest example here. When Dad (the fascist nerd who is inflicting this on his family) first uses the application he throws approximate values into it for Daughter. He thinks she is 5'2" (157 cm) and 125 lbs (56kg). The next day Mom sits down to generate the menu and looks back over what the bumbling Dad did, quietly fumes that he can never recall anything about the family, and says the value is really 118 lbs! This is the first introduction of the discord. It seems, in this scenario, Mom is probably more correct that Dad. Though both are only an approximation of the actual value. The next day the dear Daughter decides to use the program and sees her weight listed. With the vanity only a teenager could muster she changes the weight to 110 lbs. Later that day the Mom returns home from a doctor's visit the Daughter needed and decides that it would be a good idea to update her Daughter's weight in the program. Hooray, another value, this time 117 lbs. Now how do you reconcile these data points? Measurement error, confidence in parties, bias, and more all confound the data. In some idealized world we'd have a weight authority of some nature providing the one and only truth. How about in our world though? And the icing on the cake is that this single data point changes over time. How have you guys solved or managed this conflict?

    Read the article

  • Data Mining Email with Thunderbird

    - by user554629
    Oracle has many formal, searchable locations:  Service Requests, BugIDs, Technical Documents. These contain the results of an investigation for a customer crash situation;  they're created after the intense work of resolution is over, and typically contain the "root cause" of the failure ... but not the methods for identifying that cause. Email is still the standby for interacting with quickly formed groups of specialists, focusing on a particular incident.Customer BI, Network and System specialists;  Oracle Tech Support, Development, Consultants; OEM Database, OS technical support.   It is a chaotic, time-oriented set of configuration, call stacks, changes, techniques to discover and repair the failure. I needed to organize that information into something cohesive to prepare the blog entry on Teradata.  My corporate email client of choice is Thunderbird.   My original (flawed) search technique: R-Click on Inbox in Thunderbird left pane, and choose Search Messages Subject:  [ teradata ] Results: A new window titled "Search Messages"Single pane of selected messagesColumn headings:  Subject  From  Date  LocationNo preview window for messages There are 673 email entries in the result ( too many )  R-click icon just above the vertical scroll bar on the rightCheck [x] Tags Click on the Tags header to sort by "Important" View contents of message by double-clickingOpens in the Thunderbird Main Window in a new Tab Not what I was looking for, close the tab and try again. There has to be a better way.  ( and there is ) I need to be more productive, eliminating duplicate-chained messages, for example.   Even the Tag "Important" that was added during the investigation phase, is "not so much" for my current task. In the "Search Messages" window, click [ Save as Search Folder ] [ teradata ]  Appears as a new folder in my Inbox. Focus on that folder and the results appear with a list of messages like every other folder in the Inbox.Only the results of the search are shown A preview window is now available for each message Sort, Select message, Cursor Down ... navigates quickly through the messages. But wait, there's more ... Click Find ( Ctrl-F) Enter a search term for the message body, like.[ LIBPATH ] The search is "sticky" ... each message you cycle through wil focus ( and highlight) the LIBPATH search term. And still more .... Reset the Tag"Important" message.   Press "1" and the tag is removed Press "4" and a new Tag "ToDo" is applied After applying all of the tags, sort by Tag for a new message order Adjust the search criteria ... R-click on the [ teradata ] search folder, and choose Properties Add additional criteria to narrow the search Some of the information I'm looking for did not contain "teradata" in the subject line. + Body  [ contains ] [ Best Practices ] That's it.  Much more efficient search.   Thank you Thunderbird.

    Read the article

  • Writing Macros to find a specific cell and paste the value from a control cell into it

    - by G-Edinburgh
    I am having some issues writing a Macro to do the following. I have a very long list of rooms with two columns one containing the room number i.e. B-CL102 and the other containing a varying integer.I am looking to create a new column that will contain another different integer for each of the rooms. Is there any way to write a Macro so that I can use two control cells at the top of the sheet, type the room number into one and the integer matching that room into another, then run the Macro and it will automatically populate the correct cell. Then I can change the two values in the control cells and run the Macro again and so on. Thanks for your help, I have a very minimal amount of experience with Macros essentially just the basics. Thanks G

    Read the article

  • How do I populate multiple records of data into a PDF form like a mail-merge?

    - by user38801
    I have Acrobat Pro, and I have a PDF with a form on it. Assuming the fields in the form correspond to a data source (like rows in an RDBMS table or xml file), I want to then print multiple copies of the PDF file, with each copy having the values of a different row in the data source. It is preferable to directly interface with an actual database, rather than having to save an XML file every time I do this. If this involves programming that's cool too, I only posted here because the question didn't seem appropriate for StackOverflow. Thanks!

    Read the article

  • How can I insert the quoted price of gold from kitco.com into my excel spreadsheet?

    - by Frank Computer
    kitco.com provides a realtime price quote for gold and other metals. I have a spreadsheet which makes calculations based on the price of gold and would like for this realtime value to automatically be updated on my excel sheet. I tried 'get external data' from a website but that didn't work. any ideas? EDIT ADDED: Kitco has a gadget called KCAST which displays realtime quotes on the Windows taskbar. I tried capturing those values from the taskbar but that didn't work either. Maybe if Kitco provided an API or feed, it could be done?

    Read the article

  • Need help understanding Mocks and Stubs

    - by Theomax
    I'm new to use mocking frameworks and I have a few questions on the things that I am not clear on. I'm using Rhinomocks to generate mock objects in my unit tests. I understand that mocks can be created to verify interactions between methods and they record the interactions etc and stubs allow you to setup data and entities required by the test but you do not verify expectations on stubs. Looking at the recent unit tests I have created, I appear to be creating mocks literally for the purpose of stubbing and allowing for data to be setup. Is this a correct usage of mocks or is it incorrect if you're not actually calling verify on them? For example: user = MockRepository.GenerateMock<User>(); user.Stub(x => x.Id = Guid.NewGuid()); user.Stub(x => x.Name = "User1"); In the above code I generate a new user mock object, but I use a mock so I can stub the properties of the user because in some cases if the properties do not have a setter and I need to set them it seems the only way is to stub the property values. Is this a correct usage of stubbing and mocking? Also, I am not completely clear on what the difference between the following lines is: user.Stub(x => x.Id).Return(new Guid()); user.Stub(x => x.Id = Guid.NewGuid());

    Read the article

  • Changing the Default Install Location of an MSI

    - by PSteele
    A few months ago, I had to tweak an MSI installer.  It was installing into a specific directory (named the same as the application) underneath Program Files.  Since the location of Program Files can change from machine to machine, the MSI has a special token you can use for Program Files (as well as for the application name).  So the current value for “DefaultLocation” of the Application Folder was: [ProgramFilesFolder]\[ProductName] During installation, these tokens would be replaced by the actual location based on the current machine. I needed to change this to a specific folder underneath the users My Documents directory.  I poked around the help file and I could not find where these special tokens (like “[ProgramFilesFolder]”) were defined.  Obviously, there must be some specific set of values that are available and I’m sure My Documents is one of them. I finally found them documented so I’m posting the link here.  Hopefully, it will help someone else out.  Not sure where I found this link… System Folder Properties For me, it was as easy as changing the DefaultLocation to: [PersonalFolder]\MyToolName\Application Technorati Tags: .NET,MSI

    Read the article

  • check two conditions in two different columns in excel and count the matches

    - by user1727103
    I've trying to create a Error Log to help me analyse my mistakes. So for simplicity, lets assume I have two columns "Type of Question" - with values SC,RC,CR and another column that indicates whether I got this question "right/wrong".Let's assume this is my table: Question No. | Right/Wrong | Question Type | Right | SC | Right | RC | Wrong | SC | Wrong | CR | Right | RC (Pardon my formatting skills). And I want an output table like this Type of Question | Right | Wrong | Total SC | 1 | 1 | 2 RC | 2 | 0 | 2 CR | 0 | 1 | 1 So basically what I want to do is check Column3 for SC using =COUNTIF(C1:C5,"SC"), and return the total number of SC questions, and then outta the SC , I need to find out which are Right.If I know the right and the total I can get the wrong. I have never written a macro so a formula based answer would suffice.

    Read the article

  • Cocos-2D asteroids style movement (iOS)

    - by bwheeler96
    So I have a CCSprite subclass, well call this Spaceship. Spaceship needs to move on a loop, until I say othersise by calling a method. The method should look something like - (void)moveForeverAtVelocity { // method logic } The class Spaceship has two relevant iVars, resetPosition and targetPosition, the target is where we are headed, the reset is where we set to when we've hit our target. If they are both off-screen this creates a permanent looping effect. So for the logic, I have tried several things, such as CCMoveTo *move = [CCMoveTo actionWithDuration:2 position:ccp(100, 100)]; CCCallBlockN *repeat = [CCCallBlockN actionWithBlock: ^(CCNode *node) { [self moveForeverAtVelocity]; }]; [self runAction:[CCSequence actions: move, repeat, nil]]; self.position = self.resetPosition; recursively calling the moveForeverAtVelocity method. This is psuedo-code, so its not perfect. I have hard-coded some of the values for the sake of simplicity. Enough garble: The problem I am having, how can I make a method that loops forever, but can be called and reset at will. I'm running into issues with creating multiple instances of this method. If you can offer any assistance with creating this effect, that would be appreciated.

    Read the article

  • Boundary conditions for testing

    - by Loggie
    Ok so in a programming test I was given the following question. Question 1 (1 mark) Spot the potential bug in this section of code: void Class::Update( float dt ) { totalTime += dt; if( totalTime == 3.0f ) { // Do state change m_State++; } } The multiple choice answers for this question were. a) It has a constant floating point number where it should have a named constant variable b) It may not change state with only an equality test c) You don't know what state you are changing to d) The class is named poorly I wrongly answered this with answer C. I eventually received feedback on the answers and the feedback for this question was Correct answer is a. This is about understanding correct boundary conditions for tests. The other answers are arguably valid points, but do not indicate a potential bug in the code. My question here is, what does this have to do with boundary conditions? My understanding of boundary conditions is checking that a value is within a certain range, which isn't the case here. Upon looking over the question, in my opinion, B should be the correct answer when considering the accuracy issues of using floating point values.

    Read the article

  • Iozone: sensible settings for a server with lots of RAM

    - by Frank Brenner
    I have just acquired a server with: 2x quadcore Xeons 48G ECC RAM 5x 160GB SSDs on an LSI 9260-8i Before deploying the target platform, I'd like to collect as much benchmark data as possible, testing I/O with hardware RAID in various configurations, ZFS zRAID, as well as I/O performance on vSphere and with KVM virtualization. In order to see real disk I/O performance without cache effects, I tried running Iozone with a maximum file of more than twice the physical RAM as recommended in the documentation, so: iozone -a -g100G However, as one might expect, this takes far too long to be practicable. (I stopped the run after seven hours..) I'd like to reduce the range of record and file sizes to values that might reflect realistic performance for an application server, hopefully getting the run times to under an hour or so. Any ideas? Thanks.

    Read the article

  • When decomposing a large function, how can I avoid the complexity from the extra subfunctions?

    - by missingno
    Say I have a large function like the following: function do_lots_of_stuff(){ { //subpart 1 ... } ... { //subpart N ... } } a common pattern is to decompose it into subfunctions function do_lots_of_stuff(){ subpart_1(...) subpart_2(...) ... subpart_N(...) } I usually find that decomposition has two main advantages: The decomposed function becomes much smaller. This can help people read it without getting lost in the details. Parameters have to be explicitly passed to the underlying subfunctions, instead of being implicitly available by just being in scope. This can help readability and modularity in some situations. However, I also find that decomposition has some disadvantages: There are no guarantees that the subfunctions "belong" to do_lots_of_stuff so there is nothing stopping someone from accidentally calling them from a wrong place. A module's complexity grows quadratically with the number of functions we add to it. (There are more possible ways for things to call each other) Therefore: Are there useful convention or coding styles that help me balance the pros and cons of function decomposition or should I just use an editor with code folding and call it a day? EDIT: This problem also applies to functional code (although in a less pressing manner). For example, in a functional setting we would have the subparts be returning values that are combined in the end and the decomposition problem of having lots of subfunctions being able to use each other is still present. We can't always assume that the problem domain will be able to be modeled on just some small simple types with just a few highly orthogonal functions. There will always be complicated algorithms or long lists of business rules that we still want to correctly be able to deal with. function do_lots_of_stuff(){ p1 = subpart_1() p2 = subpart_2() pN = subpart_N() return assembleStuff(p1, p2, ..., pN) }

    Read the article

  • Matlab: Why is '1' + 1 == 50? [migrated]

    - by phi
    Matlab has weak dynamic typing, which is what causes this weird behaviour. What I do not understand is what exactly happens, as this result really surprises me. Edit: To clarify, what I'm describing is clearly a result of Matlab storing chars in ASCII-format, which was also mentioned in the comments. I'm more interested in the way Matlab handles its variables, and specifically, how and when it assigns a type/tag to the values. Thanks. '1' is a 1-by-1 matrix of chars in matlab and '123' is a 1-by-3 matrix of chars. As expected, 1 returns a 1-by-1 double. Now if I enter '1' + 1 I get 50 as a 1-by-1 double, and if I enter '123' + 1 I get a 1-by-3 double [ 50 51 52 ] Furthermore, if I type 'a' + 1 the result is 98 in a 1-by-1 double. I assume this has to do with how Matlab stores char-variables in ascii form, but how exactly is it handling these? Are the data actually unityped and tagged, or how does it work? Thanks.

    Read the article

  • Quick Fix for GlassFish/MySQL NoPasswordCredential Found

    - by MarkH
    Just the other day, I stood up a GlassFish 3.1.2 server in preparation for a new web app we've developed. Since we're using MySQL as the back-end database, I configured it for MySQL (driver) and created the requisite JDBC resource and supporting connection pool. Pinging the finished pool returned a success, and all was well. Until we fired up the app, that is -- in this case, after a weekend. Funny how things seem to break when you leave them alone for a couple of days. :-) Strangely, the error indicated "No PasswordCredential found". Time to re-check that pool. All the usual properties and values were there (URL, driverClass, serverName, databaseName, portNumber, user, password) and were populated correctly. Yes, the password field, too. And it had pinged successfully. So why the problem? A bit of searching online produced enough relevant material to offer promise. I didn't take notes as I was investigating the cause (note to self), but here were the general steps I took to resolve the issue: First, per some guidance I had found, I tried resetting the password value to nothing (using () for a value). Of course, this didn't fix anything; the database account requires a password. And when I tried to put the value back, GlassFish politely refused. Hmm. I'd seen that some folks created a new pool to replace the "broken" one, and while that did work for them, it seemed to simply side-step the issue. So I deleted the password property - which GlassFish allowed me to do - and restarted the domain. Once I was back in, I re-added the password property and its value, saved it, and pinged...success! But now to the app for the litmus test. The web app worked, and everything and everyone was now happy. Not bad for a Monday.  :-D Hope this helps, Mark

    Read the article

  • Apache mod_header rule to change all cookies to secure

    - by Supowski
    I would like to change all cookies to be secure and http-only. It works fine for one cookie, but doesn't work when multiple cookies are set in response. Apache mod_header rule should change cookies from: Set-Cookie cookie1=value; Path=/somePath Set-Cookie cookie2=value; Path=/somePath to Set-Cookie cookie1=value; Path=/somePath; Secure; Http-Only Set-Cookie cookie2=value; Path=/somePath; Secure; Http-Only I use mod_headers for it with following rule: Header edit Set-Cookie ^(.*)$ $1;Secure;HttpOnly It works fine when only one cookie is set, but if there is more than one, it just removes all the following and they are not set at all. Any help how to write mod_headers rule for multiple values? or the problem is in something else?

    Read the article

  • How to modify partitions after install?

    - by ChocoDeveloper
    I wanted to have Ubuntu with full disk encryption on one big partition, and Windows on a small one. In 12.04, only the Server Edition installer has full disk encryption, so I used that and then installed ubuntu-desktop. When it asked for the size, I reduced it from ~999GB to ~750gb. Now after the install, on both gparted and disk utility I see /dev/sda2 taking ~931GB, and nothing unallocated, so I can't create a partition for windows. I got the size right, because when I right-click inside a folder, then hit 'properties', I see Free space: ~690GB (I don't know why it's not ~750GB, but at least it's not 900). The command df -h shows the same. So what can I do? Normally I would just resize a partition with gparted to create unallocated space, then create the partition. But here I have two problems: gparted does not seem to be showing the correct values, and also it says it does not support LUKS so I'm afraid it will mess things up. Any thoughts?

    Read the article

  • Override methods should call base method?

    - by Trevor Pilley
    I'm just running NDepend against some code that I have written and one of the warnings is Overrides of Method() should call base.Method(). The places this occurs are where I have a base class which has virtual properties and methods with default behaviour but which can be overridden by a class which inherits from the base class and doesn't call the overridden method. For example, in the base class I have a property defined like this: protected virtual char CloseQuote { get { return '"'; } } And then in an inheriting class which uses a different close quote: protected override char CloseQuote { get { return ']'; } } Not all classes which inherit from the base class use different quote characters hence my initial design. The alternatives I thought of were have get/set properties in the base class with the defaults set in the constructor: protected BaseClass() { this.CloseQuote = '"'; } protected char CloseQuote { get; set; } public InheritingClass() { this.CloseQuote = ']'; } Or make the base class require the values as constructor args: protected BaseClass(char closeQuote, ...) { this.CloseQuote = '"'; } protected char CloseQuote { get; private set; } public InheritingClass() base (closeQuote: ']', ...) { } Should I use virtual in a scenario where the base implementation may be replaced instead of extended or should I opt for one of the alternatives I thought of? If so, which would be preferable and why?

    Read the article

  • Nullable types and ?? operator C# [en-US]

    - by ruimachado
    Nullable types vs Non-nullable types   While developing our C# projects its frequent the null comparison operation to avoid null exceptions. This simple operation is mainly coded using the "var x = null" code example inside an if clause. However not all types of variables are nullable, which means that setting a variable to null is not allowed in every cases, it depends on what kind of type are you defining. But what if there was an extension to your non-nullable type that would convert your variable types to nullable? This extension really exists. As I said before in C# you have nullable types which represent all the values of an underlying type, and an additional null value and can be declared easily using "T?", where T is the type of the variable and for example the normal int type cannot be null, so its a non-nullable type, however if you define a "int?" your variable can be null, what you do is convert a non-nullable type to a nullable type. Example: int x=null;     Not allowed     int? x=null;   Allowed     While using nullable types you can check if a variable is null the same way you do it with nullable types:     But what about setting a default value when a certain variable is null?   In this cases the c# .net framework let you set a default value when you try to assign a nullable type to a non-nullable type, using the ?? operator. If you don't use this operator you can still catch the InvalidOperationException which is throw in this cases. For example  without the ?? operator :     Using the ?? operator your code becomes cleaner and more easy to read and you get a bonus, you can set a default value for multiple variables using the ?? in a chain set.     That’s it,   Thanks, Rui Machado rpmachado.wordpress.com

    Read the article

  • Intermittent sound

    - by ej159
    The sound on my machine (Medion Akoya S5610) works intermittently. If I reboot enough times I do get sound. This happened before I upgraded, when running Oneiric too. I have fiddled around with alsa-base.conf, putting in different values for model in options snd-hda-intel model=but still the issue persists (although I get the impression that I am more like to have sound on the next reboot if I have edited that file although I can't be sure of this). Adding index=0 does not help the situation either. I have been thinking that this problem could be related some how to the order that driver modules are loaded. The snd-hda-intel module is also used for the sound card (ALC888) in my graphics card. Could it be that these are some how competing? If so, how do I add a preference when they are using the same module? This is the result of lspci -nn | grep Audio (when sound was not working): 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03) 01:00.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RV620 HDMI Audio [Radeon HD 3400 Series] [1002:aa28] I've been wrestling with this problem for ages and ages and have spent days looking for answers on forums but to no avail so I would appreciate any help you can give. Many thanks

    Read the article

  • Getting Center and Radius of Irregural Object

    - by Moaz ELdeen
    I have drawn an asteroid object manually , and would like to get its center/radius by a specific equation. I think I can get them by calculated and hard-coded values. The code to draw the asteroid: void Asteroid::Draw() { float ratio = app::getWindowWidth()/app::getWindowHeight(); gl::pushMatrices(); gl::translate(m_Pos*ratio); gl::scale(3.5*ratio,3.5*ratio,3.5*ratio); gl::color(ci::Color(1,1,1)); gl::drawLine(Vec2f(-15,0),Vec2f(-10,-5)); gl::drawLine(Vec2f(-10,-5),Vec2f(-5,-5)); gl::drawLine(Vec2f(-5,-5),Vec2f(-5,-8)); gl::drawLine(Vec2f(-5,-8),Vec2f(5,-8)); gl::drawLine(Vec2f(5,-8),Vec2f(5,-5)); gl::drawLine(Vec2f(5,-5),Vec2f(10,-5)); gl::drawLine(Vec2f(10,-5),Vec2f(15,0)); gl::drawLine(Vec2f(15,0),Vec2f(10,5)); gl::drawLine(Vec2f(10,5),Vec2f(-10,5)); gl::drawLine(Vec2f(-10,5),Vec2f(-10,5)); gl::drawLine(Vec2f(-15,0),Vec2f(-10,5)); gl::popMatrices(); } According to the answer I have written that code to calculate the radius, is it correct or not ? cinder::Vec2f Asteroid::getCenter() { return ci::Vec2f(m_Pos.x, m_Pos.y); } double Asteroid::getRadius() { ci::Vec2f _vec = (getCenter()- Vec2f(15,5)); return _vec.length()*0.3f; }

    Read the article

  • What problem does double or triple buffering solve in modern games?

    - by krokvskrok
    I want to check if my understanding of the causes for using double (or triple) buffering is correct: A monitor with 60Hz refresh's the monitor-display 60 times per second. If the monitor refresh the monitor-display, he updates pixel for pixel and line for line. The monitor requests the color values for the pixels from the video memory. If I run now a game, then this game is constantly manipulating this video memory. If this game don't use a buffer strategy (double buffering etc.) then the following problem can happen: The monitor is now refreshing his monitor-display. At this moment the monitor had refreshed the first half monitor-display already. At the same time, the game had manipulated the video memory with new data. Now the monitor accesses for the second half monitor-display this new manipulated data from the video memory. The problems can be tearing or flickering. Is my understanding of cases of using buffer strategy correct? Are there other reasons?

    Read the article

  • gmetric data submitted doesn't follow dmax value

    - by 580farm
    I have a custom script that is querying a metric port for an application that I'm running and submitting parsed values to ganglia via gmetric. The script runs every minute, so I submit the data to ganglia using the following gmetric options: /usr/sbin/gmetric -g ec2 -s positive -t uint32 -d 600 -n "$NAME" -v $VALUE -x 60 But for some reason there are still gaps in the graphing data: Is there something in my formatting that is preventing the dmax/ttl of the last metric received from being honored? Is there anyone who does custom metric collection that has run into this problem before that can shed some insight or provide some tips as to how to best correct this?

    Read the article

< Previous Page | 508 509 510 511 512 513 514 515 516 517 518 519  | Next Page >