Search Results

Search found 13859 results on 555 pages for 'non functional'.

Page 512/555 | < Previous Page | 508 509 510 511 512 513 514 515 516 517 518 519  | Next Page >

• Is it too early to start designing for Task Parallel Library?

  - by Joe Erickson

  I have been following the development of the .NET Task Parallel Library (TPL) with great interest since Microsoft first announced it. There is no doubt in my mind that we will eventually take advantage of TPL. What I am questioning is whether it makes sense to start taking advantage of TPL when Visual Studio 2010 and .NET 4.0 are released, or whether it makes sense to wait a while longer. Why Start Now? The .NET 4.0 Task Parallel Library appears to be well designed and some relatively simple tests demonstrate that it works well on today's multi-core CPUs. I have been very interested in the potential advantages of using multiple lightweight threads to speed up our software since buying my first quad processor Dell Poweredge 6400 about seven years ago. Experiments at that time indicated that it was not worth the effort, which I attributed largely to the overhead of moving data between each CPU's cache (there was no shared cache back then) and RAM. Competitive advantage - some of our customers can never get enough performance and there is no doubt that we can build a faster product using TPL today. It sounds fun. Yes, I realize that some developers would rather poke themselves in the eye with a sharp stick, but we really enjoy maximizing performance. Why Wait? Are today's Intel Nehalem CPUs representative of where we are going as multi-core support matures? You can purchase a Nehalem CPU with 4 cores which share a single level 3 cache today, and most likely a 6 core CPU sharing a single level 3 cache by the time Visual Studio 2010 / .NET 4.0 are released. Obviously, the number of cores will go up over time, but what about the architecture? As the number of cores goes up, will they still share a cache? One issue with Nehalem is the fact that, even though there is a very fast interconnect between the cores, they have non-uniform memory access (NUMA) which can lead to lower performance and less predictable results. Will future multi-core architectures be able to do away with NUMA? Similarly, will the .NET Task Parallel Library change as it matures, requiring modifications to code to fully take advantage of it? Limitations Our core engine is 100% C# and has to run without full trust, so we are limited to using .NET APIs.

  Read the article

• Python - Polymorphism in wxPython, What's wrong?

  - by Wallter

  I am trying to wright a simple custom button in wx.Python. My code is as follows, an error is thrown on line 19 of my "Custom_Button.py" - What is going on? I can find no help online for this error and have a suspicion that it has to do with the Polymorphism. (As a side note: I am relatively new to python having come from C++ and C# any help on syntax and function of the code would be great! - knowing that, it could be a simple error. thanks!) Error def __init__(self, parent, id=-1, NORM_BMP, PUSH_BMP, MOUSE_OVER_BMP, **kwargs): SyntaxError: non-default argument follows default argument Main.py class MyFrame(wx.Frame): def __init__(self, parent, ID, title): wxFrame.__init__(self, parent, ID, title, wxDefaultPosition, wxSize(400, 400)) self.CreateStatusBar() self.SetStatusText("Program testing custom button overlays") menu = wxMenu() menu.Append(ID_ABOUT, "&About", "More information about this program") menu.AppendSeparator() menu.Append(ID_EXIT, "E&xit", "Terminate the program") menuBar = wxMenuBar() menuBar.Append(menu, "&File"); self.SetMenuBar(menuBar) self.Button1 = Custom_Button(self, parent, -1, "D:/Documents/Python/Normal.bmp", "D:/Documents/Python/Clicked.bmp", "D:/Documents/Python/Over.bmp", "None", wx.Point(200,200), wx.Size(300,100)) EVT_MENU(self, ID_ABOUT, self.OnAbout) EVT_MENU(self, ID_EXIT, self.TimeToQuit) def OnAbout(self, event): dlg = wxMessageDialog(self, "Testing the functions of custom " "buttons using pyDev and wxPython", "About", wxOK | wxICON_INFORMATION) dlg.ShowModal() dlg.Destroy() def TimeToQuit(self, event): self.Close(true) class MyApp(wx.App): def OnInit(self): frame = MyFrame(NULL, -1, "wxPython | Buttons") frame.Show(true) self.SetTopWindow(frame) return true app = MyApp(0) app.MainLoop() Custom Button import wx from wxPython.wx import * class Custom_Button(wx.PyControl): ############################################ ##THE ERROR IS BEING THROWN SOME WHERE IN HERE ## ############################################ # The BMP's Mouse_over_bmp = wx.Bitmap(0) # When the mouse is over Norm_bmp = wx.Bitmap(0) # The normal BMP Push_bmp = wx.Bitmap(0) # The down BMP Pos_bmp = wx.Point(0,0) # The posisition of the button def __init__(self, parent, id=-1, NORM_BMP, PUSH_BMP, MOUSE_OVER_BMP, text="", pos, size, **kwargs): wx.PyControl.__init__(self,parent, id, **kwargs) # Set the BMP's to the ones given in the constructor self.Mouse_over_bmp = wx.Bitmap(MOUSE_OVER_BMP) self.Norm_bmp = wx.Bitmap(NORM_BMP) self.Push_bmp = wx.Bitmap(PUSH_BMP) self.Pos_bmp = pos ############################################ ##THE ERROR IS BEING THROWN SOME WHERE IN HERE ## ############################################ self.Bind(wx.EVT_LEFT_DOWN, self._onMouseDown) self.Bind(wx.EVT_LEFT_UP, self._onMouseUp) self.Bind(wx.EVT_LEAVE_WINDOW, self._onMouseLeave) self.Bind(wx.EVT_ENTER_WINDOW, self._onMouseEnter) self.Bind(wx.EVT_ERASE_BACKGROUND,self._onEraseBackground) self.Bind(wx.EVT_PAINT,self._onPaint) self._mouseIn = self._mouseDown = False def _onMouseEnter(self, event): self._mouseIn = True def _onMouseLeave(self, event): self._mouseIn = False def _onMouseDown(self, event): self._mouseDown = True def _onMouseUp(self, event): self._mouseDown = False self.sendButtonEvent() def sendButtonEvent(self): event = wx.CommandEvent(wx.wxEVT_COMMAND_BUTTON_CLICKED, self.GetId()) event.SetInt(0) event.SetEventObject(self) self.GetEventHandler().ProcessEvent(event) def _onEraseBackground(self,event): # reduce flicker pass def _onPaint(self, event): dc = wx.BufferedPaintDC(self) dc.SetFont(self.GetFont()) dc.SetBackground(wx.Brush(self.GetBackgroundColour())) dc.Clear() dc.DrawBitmap(self.Norm_bmp) # draw whatever you want to draw # draw glossy bitmaps e.g. dc.DrawBitmap if self._mouseIn: # If the Mouse is over the button dc.DrawBitmap(self, self.Mouse_over_bmp, self.Pos_bmp, useMask=False) if self._mouseDown: # If the Mouse clicks the button dc.DrawBitmap(self, self.Push_bmp, self.Pos_bmp, useMask=False)

  Read the article

• jquery ajax post callback - manipulation stops after the "third" call

  - by shanyu

  EDIT: The problem is not related to Boxy, I've run into the same issue when I've used JQuery 's load method. EDIT 2: When I take out link.remove() from inside the ajax callback and place it before ajax load, the problem is no more. Are there restrictions for manipulating elements inside an ajax callback function. I am using JQuery with Boxy plugin. When the 'Flag' link on the page is clicked, a Boxy modal pops-up and loads a form via ajax. When the user submits the form, the link (<a> tag) is removed and a new one is created from the ajax response. This mechanism works for, well, 3 times! After the 3rd, the callback function just does not remove/replace/append (tested several variations of manipulation) the element. The only hint I have is that after the 3rd call, the parent of the link becomes non-selectable. However I can't make anything of this. Sorry if this is a very trivial issue, I have no experience in client-side programming. The relevant html is below: <div class="flag-link"> <img class="flag-img" style="width: 16px; visibility: hidden;" src="/static/images/flag.png" alt=""/> <a class="unflagged" href="/i/flag/showform/9/1/?next=/users/1/ozgurisil">Flag</a> </div> Here is the relevant js code: $(document).ready(function() { $('div.flag-link a.unflagged').live('click', function(e){ doFlag(e); return false; }); ... }); function doFlag(e) { var link = $(e.target); var url = link.attr('href'); Boxy.load(url, {title:'Inappropriate Content', unloadOnHide:true, cache:false, behaviours: function(r) { $("#flag-form").live("submit", function(){ var post_url = $("#flag-form").attr('action'); boxy = Boxy.get(this); boxy.hideAndUnload(); $.post(post_url, $("#flag-form").serialize(), function(data){ par = link.parent(); par.append(data); alert (par.attr('class')); //BECOMES UNDEFINED AT THE 3RD CALL!! par.children('img.flag-img').css('visibility', 'visible'); link.remove(); }); return false; }); }}); }

  Read the article

• Twisted: why is it that passing a deferred callback to a deferred thread makes the thread blocking a

  - by surtyaarthoughts

  I unsuccessfully tried using txredis (the non blocking twisted api for redis) for a persisting message queue I'm trying to set up with a scrapy project I am working on. I found that although the client was not blocking, it became much slower than it could have been because what should have been one event in the reactor loop was split up into thousands of steps. So instead, I tried making use of redis-py (the regular blocking twisted api) and wrapping the call in a deferred thread. It works great, however I want to perform an inner deferred when I make a call to redis as I would like to set up connection pooling in attempts to speed things up further. Below is my interpretation of some sample code taken from the twisted docs for a deferred thread to illustrate my use case: #!/usr/bin/env python from twisted.internet import reactor,threads from twisted.internet.task import LoopingCall import time def main_loop(): print 'doing stuff in main loop.. do not block me!' def aBlockingRedisCall(): print 'doing lookup... this may take a while' time.sleep(10) return 'results from redis' def result(res): print res def main(): lc = LoopingCall(main_loop) lc.start(2) d = threads.deferToThread(aBlockingRedisCall) d.addCallback(result) reactor.run() if __name__=='__main__': main() And here is my alteration for connection pooling that makes the code in the deferred thread blocking : #!/usr/bin/env python from twisted.internet import reactor,defer from twisted.internet.task import LoopingCall import time def main_loop(): print 'doing stuff in main loop.. do not block me!' def aBlockingRedisCall(x): if x<5: #all connections are busy, try later print '%s is less than 5, get a redis client later' % x x+=1 d = defer.Deferred() d.addCallback(aBlockingRedisCall) reactor.callLater(1.0,d.callback,x) return d else: print 'got a redis client; doing lookup.. this may take a while' time.sleep(10) # this is now blocking.. any ideas? d = defer.Deferred() d.addCallback(gotFinalResult) d.callback(x) return d def gotFinalResult(x): return 'final result is %s' % x def result(res): print res def aBlockingMethod(): print 'going to sleep...' time.sleep(10) print 'woke up' def main(): lc = LoopingCall(main_loop) lc.start(2) d = defer.Deferred() d.addCallback(aBlockingRedisCall) d.addCallback(result) reactor.callInThread(d.callback, 1) reactor.run() if __name__=='__main__': main() So my question is, does anyone know why my alteration causes the deferred thread to be blocking and/or can anyone suggest a better solution?

  Read the article

• GCC: Simple inheritance test fails

  - by knight666

  I'm building an open source 2D game engine called YoghurtGum. Right now I'm working on the Android port, using the NDK provided by Google. I was going mad because of the errors I was getting in my application, so I made a simple test program: class Base { public: Base() { } virtual ~Base() { } }; // class Base class Vehicle : virtual public Base { public: Vehicle() : Base() { } ~Vehicle() { } }; // class Vehicle class Car : public Vehicle { public: Car() : Base(), Vehicle() { } ~Car() { } }; // class Car int main(int a_Data, char** argv) { Car* stupid = new Car(); return 0; } Seems easy enough, right? Here's how I compile it, which is the same way I compile the rest of my code: /home/oem/android-ndk-r3/build/prebuilt/linux-x86/arm-eabi-4.4.0/bin/arm-eabi-g++ -g -std=c99 -Wall -Werror -O2 -w -shared -fshort-enums -I ../../YoghurtGum/src/GLES -I ../../YoghurtGum/src -I /home/oem/android-ndk-r3/build/platforms/android-5/arch-arm/usr/include -c src/Inheritance.cpp -o intermediate/Inheritance.o (Line breaks are added for clarity). This compiles fine. But then we get to the linker: /home/oem/android-ndk-r3/build/prebuilt/linux-x86/arm-eabi-4.4.0/bin/arm-eabi-gcc -lstdc++ -Wl, --entry=main, -rpath-link=/system/lib, -rpath-link=/home/oem/android-ndk-r3/build/platforms/android-5/arch-arm/usr/lib, -dynamic-linker=/system/bin/linker, -L/home/oem/android-ndk-r3/build/prebuilt/linux-x86/arm-eabi-4.4.0/lib/gcc/arm-eabi/4.4.0, -L/home/oem/android-ndk-r3/build/platforms/android-5/arch-arm/usr/lib, -rpath=../../YoghurtGum/lib/GLES -nostdlib -lm -lc -lGLESv1_CM -z /home/oem/android-ndk-r3/build/platforms/android-5/arch-arm/usr/lib/crtbegin_dynamic.o /home/oem/android-ndk-r3/build/platforms/android-5/arch-arm/usr/lib/crtend_android.o intermediate/Inheritance.o ../../YoghurtGum/bin/YoghurtGum.a -o bin/Galaxians.android As you can probably tell, there's a lot of cruft in there that isn't really needed. That's because it doesn't work. It fails with the following errors: intermediate/Inheritance.o:(.rodata._ZTI3Car[typeinfo for Car]+0x0): undefined reference to `vtable for __cxxabiv1::__si_class_type_info' intermediate/Inheritance.o:(.rodata._ZTI7Vehicle[typeinfo for Vehicle]+0x0): undefined reference to `vtable for __cxxabiv1::__vmi_class_type_info' intermediate/Inheritance.o:(.rodata._ZTI4Base[typeinfo for Base]+0x0): undefined reference to `vtable for __cxxabiv1::__class_type_info' collect2: ld returned 1 exit status make: *** [bin/Galaxians.android] Fout 1 These are the same errors I get from my actual application. If someone could explain to me where I went wrong in my test or what option or I forgot in my linker, I would be very, extremely grateful. Thanks in advance. UPDATE: When I make my destructors non-inlined, I get new and more exciting link errors: intermediate/Inheritance.o:(.rodata+0x78): undefined reference to `vtable for __cxxabiv1::__si_class_type_info' intermediate/Inheritance.o:(.rodata+0x90): undefined reference to `vtable for __cxxabiv1::__vmi_class_type_info' intermediate/Inheritance.o:(.rodata+0xb0): undefined reference to `vtable for __cxxabiv1::__class_type_info' collect2: ld returned 1 exit status make: *** [bin/Galaxians.android] Fout 1

  Read the article

• One-to-many relationship with JDO in Google App Engine

  - by Marvin

  I've followed the GAE docs on setting up one-to-many relationship in JDO but I'm still having trouble in retrieving the collection data back. I have no problem getting the other non-collection fields back. Here are my classes: @PersistenceCapable public class User{ @PrimaryKey @Persistent(valueStrategy = IdGeneratorStrategy.IDENTITY) private Key key; @Persistent private String uniqueId; @Persistent private String email; @Persistent private List<Address> addresses = new ArrayList<Address>() ; ... } @PersistenceCapable public class Phone{ @PrimaryKey @Persistent(valueStrategy = IdGeneratorStrategy.IDENTITY) private Key key; @Persistent private String number; ... } public class UserDaoImpl implements UserDao { public void insertUser(User user) { if(user.getKey() == null) { com.google.appengine.api.datastore.Key key = KeyFactory.createKey(User.class.getSimpleName(), user.getEmail()); user.setKey(key); } PersistenceManager pm = PersistenceManagerWrapper.getPersistenceManager(); notNull(user); try { pm.makePersistent(user); } finally { pm.close(); } } @SuppressWarnings("unchecked") public User getUser(String uniqueId) { PersistenceManager pm = PersistenceManagerWrapper.getPersistenceManager(); Query query = pm.newQuery(User.class); query.setFilter("uniqueId == uniqueIdParam"); query.declareParameters("String uniqueIdParam"); User user = null; try { List<User> users = (List<User>)(query.execute(uniqueId)); //TODO abstract this if(users.size() > 0) user = users.get(0); } finally { pm.close(); } return user; } } public class UserDaoImplTest { @Test public void getUserTest() { User user = createTestUser(); assertNotNull("The user object should not be null", user); userDao.insertUser(user); User returnedUser = userDao.getUser(TEST_USER_ID); assertNotNull("The returnedUser object should not be null", returnedUser); Assert.assertPropertyEqualsExcludeProperties("User Object", user, returnedUser, ""); } } When I run the test, all the properties for User is populated but the list of Phone if I get is empty.

  Read the article

• How to call Ajax to run a PHP file while maintaining PHP & Javascript variables.

  - by Umar

  Hi Stackoverflowers. I'm using the Facebook php-sdk to get the users name and friends, right now the loading friends part takes about +3 seconds so I wanted to do it via Ajax, e.g. so the document can load and jQuery then calls an external PHP script which loads the friends (their names and their profile pictures). So to do this I did: $(document).ready(function() { var loadUrl = "http://localhost/fb/getFriends.php" ; $("#friends") .html("Hold on, your friends are loading!") .load(loadUrl); }); But I get a PHP error: Fatal error: Call to a member function api() on a non-object If I do this in the same PHP file (so I don't use Ajax at all to call it) it works fine. Now I think I understand the reason this is happening, but I don't know how to fix it. In my main index.php file I have a bunch of init and session code e.g. FB.init({ appId : '<?php echo $facebook->getAppId(); ?>', session : <?php echo json_encode($session); ?>, // don't refetch the session when PHP already has it status : true, // check login status cookie : true, // enable cookies to allow the server to access the session xfbml : true // parse XFBML }); So I'm just wondering what is the best way to treat my new separate PHP file getFriends.php in a way where it has access to all PHP/JavaScript session data/variables? If you haven't used the Facebook php-sdk I'll quickly explain what I mean: Lets say I have index.php and getUsername.php, from index.php I want to retrieve the getUsername.php file via Ajax using .load. Now the problem is getUsername.php needs to access PHP session data/Javascript Init functions which were created in index.php, so I'm thinking of ways to solve this (I'm new to PHP so sorry if this sounds silly) but I'm thinking maybe I could do a POST in jQuery Ajax and post the session data? Or maybe I could create a PHP class, so something like: class getUsername extends index{} /*Yes I'm a newbie*/ If you have a look at the php-sdk example.php link posted at the top maybe you'd better understand what variables exactly need to be accessed from a new file. Also on a different note, I'm using PHP to work out page rendering times and it seems that fetching the users name alone : // Session based API call. if ($session) { try { $uid = $facebook->getUser(); $me = $facebook->api('/me'); } catch (FacebookApiException $e) { error_log($e); } } Can take a good 4 seconds, is this normal? Once I get the users details is it good to cache it or something? -Speed isn't as important right now, for now I'm just trying to figure out this Ajax-separating php files thing. Woah this is a long post. Thanks very much for your time.

  Read the article

• [NSIS] Custom radio-buttom INI page via Eclipse

  - by Omegazero

  I'm using Eclipse's create InstallOptions menu to create a custom INI page with radio-buttons for repackaging the Blackberry Desktop installer. There are 2 sections for each type: "Internet" and "Enterprise". I need a user to select 1 of the 2 options and depending on their selection, the page will carry over the selection chosen in the custom page, jump to the INSTFILES page, and continue onto the end. I couldn't find any concrete documentation on getting INI pages to load in the script (I'm probably searching incorrectly), and then pass data from one page to the next (according to fields I guess?) Any help is appreciated. Even if it's to tell me I'm blind and can't read a doc (though a link would help :) ) Here's the INI code: ; Auto-generated by EclipseNSIS InstallOptions Script Wizard ; Jul 29, 2009 5:42:56 PM [Settings] NumFields=7 Title=RIM BlackBerry Desktop 5.0 installation CancelEnabled=1 [Field 1] Type=RadioButton Left=15 Top=28 Right=100 Bottom=38 Text=Internet State= Flags=NOTIFY [Field 4] Type=RadioButton Left=15 Top=95 Right=100 Bottom=105 Text=Enterprise Flags=NOTIFY [Field 2] Type=GroupBox Left=0 Top=10 Right=300 Bottom=75 Text= [Field 5] Type=Label Left=30 Top=42 Right=235 Bottom=52 Text=For users who are NOT on the Enterprise (Exchange) server [Field 6] Type=Label Left=30 Top=111 Right=235 Bottom=121 Text=Choose this only if you are on the Exchange server [Field 3] Type=GroupBox Left=0 Top=75 Right=300 Bottom=140 [Field 7] Type=Label Left=0 Top=0 Right=130 Bottom=10 Text=Please choose your installation method ...And here's the NSI code: Auto-generated by EclipseNSIS Script Wizard Jul 29, 2009 5:42:16 PM Name "BlackBerry Desktop" RequestExecutionLevel admin General Symbol Definitions !define VERSION 5.0.0.11 !define COMPANY RIM !define URL http://www.blackberry.com MUI Symbol Definitions !define MUI_ICON BBD.ico !define MUI_LICENSEPAGE_RADIOBUTTONS Included files !include Sections.nsh !include MUI2.nsh Reserved Files ReserveFile "${NSISDIR}\Plugins\AdvSplash.dll" Installer pages !insertmacro MUI_PAGE_WELCOME !insertmacro MUI_PAGE_LICENSE license.txt !insertmacro MUI_PAGE_COMPONENTS !insertmacro MUI_PAGE_INSTFILES !insertmacro MUI_PAGE_FINISH Installer languages !insertmacro MUI_LANGUAGE English Installer attributes OutFile RIM_BlackBerry_Desktop_5.0.exe InstallDir "$TEMP\RIM BlackBerry Desktop 5.0 Setup Files" CRCCheck on XPStyle on ShowInstDetails hide VIProductVersion 5.0.0.11 VIAddVersionKey /LANG=${LANG_ENGLISH} ProductName "BlackBerry Desktop" VIAddVersionKey /LANG=${LANG_ENGLISH} ProductVersion "${VERSION}" VIAddVersionKey /LANG=${LANG_ENGLISH} CompanyName "${COMPANY}" VIAddVersionKey /LANG=${LANG_ENGLISH} CompanyWebsite "${URL}" VIAddVersionKey /LANG=${LANG_ENGLISH} FileVersion "${VERSION}" VIAddVersionKey /LANG=${LANG_ENGLISH} FileDescription "" VIAddVersionKey /LANG=${LANG_ENGLISH} LegalCopyright "" Installer sections Section /o Main SEC0000 SetOutPath $INSTDIR SetOverwrite ifdiff ; TESTING PHASE SectionEnd SectionGroup /e "BlackBerry Desktop Section" Section /o Internet SEC0001 SetOutPath $INSTDIR\DRIVERS SetOverwrite ifdiff ; Execwait 'msiexec /i "$INSTDIR\BlackBerry USB and Modem Drivers_ENG (DM5.0b28).msi" /passive' SetOutPath $INSTDIR SetOverwrite ifdiff ; File /r * ; ExecWait '"$INSTDIR\Setup.exe" /S/v/qb!' SectionEnd Section /o Enterprise SEC0002 SetOutPath $INSTDIR\DRIVERS SetOverwrite ifdiff ; Execwait 'msiexec /i "$INSTDIR\BlackBerry USB and Modem Drivers_ENG (DM5.0b28).msi" /passive' SetOutPath $INSTDIR SetOverwrite ifdiff ; File /r * ; Delete /REBOOTOK "$INSTDIR\Setup.ini" ; Rename /REBOOTOK "$INSTDIR\Setup_Enterprise.ini" "$INSTDIR\Setup.ini" ; ExecWait '"$INSTDIR\Setup.exe" /S/v/qb!' SectionEnd SectionGroupEnd Section Descriptions !insertmacro MUI_FUNCTION_DESCRIPTION_BEGIN !insertmacro MUI_DESCRIPTION_TEXT ${SEC0000} $(SEC0000_DESC) !insertmacro MUI_DESCRIPTION_TEXT ${SEC0001} $(SEC0001_DESC) !insertmacro MUI_FUNCTION_DESCRIPTION_END Installer Language Strings TODO Update the Language Strings with the appropriate translations. LangString SEC0000_DESC ${LANG_ENGLISH} "Installation for non-Exchange/Enterprise BlackBerry Users" LangString SEC0001_DESC ${LANG_ENGLISH} "Installation for Exchange/Enterprise BlackBerry Users"

  Read the article

• How best to store Subversion version information in EAR's?

  - by Rene

  When receiving a bug report or an it-doesnt-work message one of my initials questions is always what version? With a different builds being at many stages of testing, planning and deploying this is often a non-trivial question. I the case of releasing Java JAR (ear, jar, rar, war) files I would like to be able to look in/at the JAR and switch to the same branch, version or tag that was the source of the released JAR. How can I best adjust the ant build process so that the version information in the svn checkout remains in the created build? I was thinking along the lines of: adding a VERSION file, but with what content? storing information in the META-INF file, but under what property with which content? copying sources into the result archive added svn:properties to all sources with keywords in places the compiler leaves them be I ended up using the svnversion approach (the accepted anwser), because it scans the entire subtree as opposed to svn info which just looks at the current file / directory. For this I defined the SVN task in the ant file to make it more portable. <taskdef name="svn" classname="org.tigris.subversion.svnant.SvnTask"> <classpath> <pathelement location="${dir.lib}/ant/svnant.jar"/> <pathelement location="${dir.lib}/ant/svnClientAdapter.jar"/> <pathelement location="${dir.lib}/ant/svnkit.jar"/> <pathelement location="${dir.lib}/ant/svnjavahl.jar"/> </classpath> </taskdef> Not all builds result in webservices. The ear file before deployment must remain the same name because of updating in the application server. Making the file executable is still an option, but until then I just include a version information file. <target name="version"> <svn><wcVersion path="${dir.source}"/></svn> <echo file="${dir.build}/VERSION">${revision.range}</echo> </target> Refs: svnrevision: http://svnbook.red-bean.com/en/1.1/re57.html svn info http://svnbook.red-bean.com/en/1.1/re13.html subclipse svn task: http://subclipse.tigris.org/svnant/svn.html svn client: http://svnkit.com/

  Read the article

• Mocking a concrete class : templates and avoiding conditional compilation

  - by AshirusNW

  I'm trying to testing a concrete object with this sort of structure. class Database { public: Database(Server server) : server_(server) {} int Query(const char* expression) { server_.Connect(); return server_.ExecuteQuery(); } private: Server server_; }; i.e. it has no virtual functions, let alone a well-defined interface. I want to a fake database which calls mock services for testing. Even worse, I want the same code to be either built against the real version or the fake so that the same testing code can both: Test the real Database implementation - for integration tests Test the fake implementation, which calls mock services To solve this, I'm using a templated fake, like this: #ifndef INTEGRATION_TESTS class FakeDatabase { public: FakeDatabase() : realDb_(mockServer_) {} int Query(const char* expression) { MOCK_EXPECT_CALL(mockServer_, Query, 3); return realDb_.Query(); } private: // in non-INTEGRATION_TESTS builds, Server is a mock Server with // extra testing methods that allows mocking Server mockServer_; Database realDb_; }; #endif template <class T> class TestDatabaseContainer { public: int Query(const char* expression) { int result = database_.Query(expression); std::cout << "LOG: " << result << endl; return result; } private: T database_; }; Edit: Note the fake Database must call the real Database (but with a mock Server). Now to switch between them I'm planning the following test framework: class DatabaseTests { public: #ifdef INTEGRATION_TESTS typedef TestDatabaseContainer<Database> TestDatabase ; #else typedef TestDatabaseContainer<FakeDatabase> TestDatabase ; #endif TestDatabase& GetDb() { return _testDatabase; } private: TestDatabase _testDatabase; }; class QueryTestCase : public DatabaseTests { public: void TestStep1() { ASSERT(GetDb().Query(static_cast<const char *>("")) == 3); return; } }; I'm not a big fan of that compile-time switching between the real and the fake. So, my question is: Whether there's a better way of switching between Database and FakeDatabase? For instance, is it possible to do it at runtime in a clean fashion? I like to avoid #ifdefs. Also, if anyone has a better way of making a fake class that mimics a concrete class, I'd appreciate it. I don't want to have templated code all over the actual test code (QueryTestCase class). Feel free to critique the code style itself, too. You can see a compiled version of this code on codepad.

  Read the article

• Creating a spam list with a web crawler in python

  - by user313623

  Hey guys, I'm not trying to do anything malicious here, I just need to do some homework. I'm a fairly new programmer, I'm using python 3.0, and I having difficulty using recursion for problem-solving. I've been stuck on this question for quite a while. Here's the assignment: Write a recursive method spam(url, n) that takes a url of a web page as input and a non-negative integer n, collects all the email address contained in the web page and adds them to a global dictionary variable spam_dict, and then recursively calls itself on every http hyperlink contained in the web page. You will use a dictionary so only one copy of every email address is save; your dictionary will store (key,value) pairs (email, email). The recursive call should use the parameter n-1 instead of n. If n = 0, you should collect the email addresses but no recursive calls should be made. The parameter n is used to limit the recursion to at most depth n. You will need to use the solutions of the two above problems; you method spam() will call the methods links2() and emails() and possibly other functions as well. Notes: 1. running spam() directly will produce no output on the screen; to find your spam_dict, you will need to read the value of spam_dict, and you will also need to reset it to the empty dictionary before every run of spam. 2. Recall how global variables are used. Usage: spam_dict = {} spam('http://reed.cs.depaul.edu/lperkovic/csc242/test1.html',0) spam_dict.keys() dict_keys([]) spam_dict = {} spam('http://reed.cs.depaul.edu/lperkovic/csc242/test1.html',1) spam_dict.keys() dict_keys(['[email protected]', '[email protected]']) So far, I've written a function that traverses web pages and puts all the links in a nice little list, and what I wanted to do was call that functions. And why would I use recursion on a dictionary? And how? I don't understand how n ties into all of this. def links2(url): content = str(urlopen(url).read()) myparser = MyHTMLParser() myparser.feed(content) lst = myparser.get() mergelst = [] for link in lst: mergelst.append(urljoin(lst[0],link)) print(mergelst) Any input (except why spam is bad) would be greatly appreciated. Also, I realize that the above function could probably look better, if you have a way to do it, I'm all ears. However, all I need is the point is for the program to produce the proper output.

  Read the article

• Why does the rename() syscall prohibit moving a directory that I can't write to a different director

  - by Daniel Papasian

  I am trying to understand why this design decision was made with the rename() syscall in 4.2BSD. There's nothing I'm trying to solve here, just understand the rationale for the behavior itself. 4.2BSD saw the introduction of the rename() syscall for the purpose of allowing atomic renames/moves of files. From 4.3BSD-Reno/src/sys/ufs/ufs_vnops.c: /* * If ".." must be changed (ie the directory gets a new * parent) then the source directory must not be in the * directory heirarchy above the target, as this would * orphan everything below the source directory. Also * the user must have write permission in the source so * as to be able to change "..". We must repeat the call * to namei, as the parent directory is unlocked by the * call to checkpath(). */ if (oldparent != dp->i_number) newparent = dp->i_number; if (doingdirectory && newparent) { VOP_LOCK(fndp->ni_vp); error = ufs_access(fndp->ni_vp, VWRITE, tndp->ni_cred); VOP_UNLOCK(fndp->ni_vp); So clearly this check was added intentionally. My question is - why? Is this behavior supposed to be intuitive? The effect of this is that one cannot move a directory (located in a directory that one can write) that one cannot write to another directory that one can write to atomically. You can, however, create a new directory, move the links over (assuming one has read access to the directory), and then remove one's write bit on the directory. You just can't do so atomically. % cd /tmp % mkdir stackoverflow-question % cd stackoverflow-question % mkdir directory-1 % mkdir directory-2 % mkdir directory-1/directory-i-cant-write % echo "foo" > directory-1/directory-i-cant-write/contents % chmod 000 directory-1/directory-i-cant-write/contents % chmod 000 directory-1/directory-i-cant-write % mv directory-1/directory-i-cant-write directory-2 mv: rename directory-1/directory-i-cant-write to directory-2/directory-i-cant-write: Permission denied We now have a directory I can't write with contents I can't read that I can't move atomically. I can, however, achieve the same effect non-atomically by changing permissions, making the new directory, using ln to create the new links, and changing permissions. (Left as an exercise to the reader) . and .. are special cased already, so I don't particularly buy that it is intuitive that if I can't write a directory I can't "change .." which is what the source suggests. Is there any reason for this besides it being the perceived correct behavior by the author of the code? Is there anything bad that can happen if we let people atomically move directories (that they can't write) between directories that they can write?

  Read the article

• Write Scheme data structures so they can be eval-d back in, or alternative

  - by Jesse Millikan

  I'm writing an application (A juggling pattern animator) in PLT Scheme that accepts Scheme expressions as values for some fields. I'm attempting to write a small text editor that will let me "explode" expressions into expressions that can still be eval'd but contain the data as literals for manual tweaking. For example, (4hss->sexp "747") is a function call that generates a legitimate pattern. If I eval and print that, it becomes (((7 3) - - -) (- - (4 2) -) (- (7 2) - -) (- - - (7 1)) ((4 0) - - -) (- - (7 0) -) (- (7 2) - -) (- - - (4 3)) ((7 3) - - -) (- - (7 0) -) (- (4 1) - -) (- - - (7 1))) which can be "read" as a string, but will not "eval" the same as the function. For this statement, of course, what I need would be as simple as (quote (((7 3... but other examples are non-trivial. This one, for example, contains structs which print as vectors: pair-of-jugglers ; --> (#(struct:hand #(struct:position -0.35 2.0 1.0) #(struct:position -0.6 2.05 1.1) 1.832595714594046) #(struct:hand #(struct:position 0.35 2.0 1.0) #(struct:position 0.6 2.0500000000000003 1.1) 1.308996938995747) #(struct:hand #(struct:position 0.35 -2.0 1.0) #(struct:position 0.6 -2.05 1.1) -1.3089969389957472) #(struct:hand #(struct:position -0.35 -2.0 1.0) #(struct:position -0.6 -2.05 1.1) -1.8325957145940461)) I've thought of at least three possible solutions, none of which I like very much. Solution A is to write a recursive eval-able output function myself for a reasonably large subset of the values that I might be using. There (probably...) won't be any circular references by the nature of the data structures used, so that wouldn't be such a long job. The output would end up looking like `(((3 0) (... ; ex 1 `(,(make-hand (make-position ... ; ex 2 Or even worse if I could't figure out how to do it properly with quasiquoting. Solution B would be to write out everything as (read (open-input-string "(big-long-s-expression)")) which, technically, solves the problem I'm bringing up but is... ugly. Solution C might be a different approach of giving up eval and using only read for parsing input, or an uglier approach where the s-expression is used as directly data if eval fails, but those both seem unpleasant compared to using scheme values directly. Undiscovered Solution D would be a PLT Scheme option, function or library I haven't located that would match Solution A. Help me out before I start having bad recursion dreams again.

  Read the article

• How do access a secure website within a sharepoint webpart?

  - by Bill

  How do access a secure website within a sharepoint webpart? The following code works fine as a console application but if you run it in a webpart, you will get a access violation WebRequest request = WebRequest.Create("https://somesecuresite.com"); WebResponse firstResponse = null; try { firstResponse = request.GetResponse(); } catch (WebException ex) { writer.WriteLine("Error: " + ex.ToString()); return; } if you access a non secure site, it also works. Any ideas? Error: System.Net.WebException: The underlying connection was closed: An unexpected error occurred on a receive. --- System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. at System.Net.UnsafeNclNativeMethods.NativePKI.CertVerifyCertificateChainPolicy(IntPtr policy, SafeFreeCertChain chainContext, ChainPolicyParameter& cpp, ChainPolicyStatus& ps) at System.Net.PolicyWrapper.VerifyChainPolicy(SafeFreeCertChain chainContext, ChainPolicyParameter& cpp) at System.Net.Security.SecureChannel.VerifyRemoteCertificate(RemoteCertValidationCallback remoteCertValidationCallback) at System.Net.Security.SslState.CompleteHandshake() at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.CheckCompletionBeforeNextReceive(ProtocolToken message, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult) at System.Net.TlsStream.CallProcessAuthentication(Object state) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result) at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.ConnectStream.WriteHeaders(Boolean async) --- End of inner exception stack trace --- at System.Net.HttpWebRequest.GetResponse()

  Read the article

• Adding rows with linq trouble with reference table

  - by Laurence Burke

  I am adding a new address and I know the structure as AddressID = PK and all other entities are non nullable. Now on insert of a new row the addrID Pk is autogened and I am wondering if I would have to get that to create a new row in the referencing table EmployeeAddress or does that automatically get generated also. also I want to be able to repopulate the dropdownlist that lists the current employee's addresses with the newly created address. static uint _curEmpID; protected void btnAdd_Click(object sender, EventArgs e) { if (txtZip.Text != "" && txtAdd1.Text != "" && txtCity.Text != "") { TestDataClassDataContext dc = new TestDataClassDataContext(); Address addr = new Address() { AddressLine1 = txtAdd1.Text, AddressLine2 = txtAdd2.Text, City = txtCity.Text, PostalCode = txtZip.Text, StateProvinceID = Convert.ToInt32(ddlState.SelectedValue) }; dc.Addresses.InsertOnSubmit(addr); lblSuccess.Visible = true; lblErrMsg.Visible = false; dc.SubmitChanges(); // // TODO: insert new row in EmployeeAddress to reference CurEmp to newly created address // SetAddrList(); } else { lblErrMsg.Text = "Invalid Input"; lblErrMsg.Visible = true; } } protected void ddlAddList_SelectedIndexChanged(object sender, EventArgs e) { lblErrMsg.Visible = false; lblSuccess.Visible = false; TestDataClassDataContext dc = new TestDataClassDataContext(); dc.ObjectTrackingEnabled = false; if (ddlAddList.SelectedValue != "-1") { var addr = (from a in dc.Addresses where a.AddressID == Convert.ToInt32(ddlAddList.SelectedValue) select a).FirstOrDefault(); txtAdd1.Text = addr.AddressLine1; txtAdd2.Text = addr.AddressLine2; txtCity.Text = addr.City; txtZip.Text = addr.PostalCode; ddlState.SelectedValue = addr.StateProvinceID.ToString(); btnSubmit.Visible = true; btnAdd.Visible = false; } else { txtAdd1.Text = ""; txtAdd2.Text = ""; txtCity.Text = ""; txtZip.Text = ""; btnAdd.Visible = true; btnSubmit.Visible = false; } } protected void SetAddrList() { TestDataClassDataContext dc = new TestDataClassDataContext(); dc.ObjectTrackingEnabled = false; var addList = from addr in dc.Addresses from eaddr in dc.EmployeeAddresses where eaddr.EmployeeID == _curEmpID && addr.AddressID == eaddr.AddressID select new { AddValue = addr.AddressID, AddText = addr.AddressID, }; ddlAddList.DataSource = addList; ddlAddList.DataValueField = "AddValue"; ddlAddList.DataTextField = "AddText"; ddlAddList.DataBind(); ddlAddList.Items.Add(new ListItem("<Add Address>", "-1")); } OK I am hoping that I did not include too much code. I would really appreciate any other comments about I could otherwise improve this code in any other ways also.

  Read the article

• DCVS + hosting for a startup commercial multiplatform phone app

  - by AG

  I'm in lean startup mode, working on a simple phone app that will be published initially as a iThingy app and an Android app with, possibly, Blackberry and Symbian versions to follow. I'm about to go from no repository to needing a central repository that up to 4 very part-time resources will be sharing. Two of us have no version control background, one has used Subversion, and I've used most of the major centralized VCS systems. I'm not going to be pushing the technical limitations of any VCS for a long time; I'm sure that any of the major systems would work fine. And the hosting accounts I've looked at seem reasonable. So I'm really focussed on minimizing the downside risks. That is, I'd like to find a stable setup that is easy to learn in general, easy to use from Windows/Eclipse, and won't paint me into any obvious corners for the next 12 months or so. A quick search of the web had led me to consider the following pairs of DVCS and hosting service, with what I think I'm hearing as their strengths and weaknesses (for my purposes): Bazaar/Launchpad -- My initial choice since I need to get more familiar with this pair for the Google Summer of Code mentoring I'm doing. But, whatever the technical merits, a non-starter for me because they are purely open source, no private repositories plans to purchase that I can see. Git/GitHub -- Git: Fast, light, ultimately flexible, but relatively less Windows friendly, Eclipse plugin (eGit) available but relatively young, GitHub: widely used, pricing is fine Mercurial/BitBucket -- Mercurial: a little less flexible, a little more Windows friendly, Eclipse plugin seems a bit more mature, BitBucket: widely used, pricing is fine, includes a wiki and an issue tracker that we might be able to use instead of something like BaseCamp, at least for a while. Mercurial/BitBucket seem like the winning pair so far for my particular situation; at least two of us are definitely going to be working mostly from Eclipse on Windows and reducing my own learning curve is a priority. ;-) But I have two specific questions: 1) Am I wrong about Bazaar/Launchpad and is there a viable, secure way to use them for proprietary code? 2) Any reason to think that the Mecurial/Bitbucket pair will end up being a headache for my Mac developer, soon, or for Blackberry or Symbian developers a little later? ag

  Read the article

• Make a compiled binary run at native speed flawlessly without recompiling from source on a another system?

  - by unknownthreat

  I know that many people, at a first glance of the question, may immediately yell out "Java", but no, I know Java's qualities. Allow me to elaborate my question first. Normally, when we want our program to run at a native speed on a system, whether it be Windows, Mac OS X, or Linux, we need to compile from source codes. If you want to run a program of another system in your system, you need to use a virtual machine or an emulator. While these tools allow you to use the program you need on the non-native OS, they sometimes have problems of performance and glitches. We also have a newer compiler called "JIT Compiler", where the compiler will parse the bytecode program to native machine language before execution. The performance may increase to a very good extent with JIT Compiler, but the performance is still not the same as running it on a native system. Another program on Linux, WINE, is also a good tool for running Windows program on Linux system. I have tried running Team Fortress 2 on it, and tried experiment with some settings. I got ~40 fps on Windows at its mid-high setting on 1280 x 1024. On Linux, I need to turn everything low at 1280 x 1024 to get ~40 fps. There are 2 notable things though: Polygon model settings do not seem to affect framerate whether I set it low or high. When there are post-processing effects or some special effects that require manipulation of drawn pixels of the current frame, the framerate will drop to 10-20 fps. From this point, I can see that normal polygon rendering is just fine, but when it comes to newer rendering methods that requires graphic card to the job, it slows down to a crawl. Anyway, this question is rather theoretical. Is there anything we can do at all? I see that WINE can run STEAM and Team Fortress 2. Although there are flaws, they can run at lower setting. Or perhaps, I should also ask, "is it possible to translate one whole program on a system to another system without recompiling from source and get native speed?" I see that we also have AOT Compiler, is it possible to use it for something like this? Or there are so many constraints (such as DirectX call or differences in software architecture) that make it impossible to have a flawless and not native to the system program that runs at native speed?

  Read the article

• How to combine designable components with dependency injection

  - by Wim Coenen

  When creating a designable .NET component, you are required to provide a default constructor. From the IComponent documentation: To be a component, a class must implement the IComponent interface and provide a basic constructor that requires no parameters or a single parameter of type IContainer. This makes it impossible to do dependency injection via constructor arguments. (Extra constructors could be provided, but the designer would ignore them.) Some alternatives we're considering: Service Locator Don't use dependency injection, instead use the service locator pattern to acquire dependencies. This seems to be what IComponent.Site.GetService is for. I guess we could create a reusable ISite implementation (ConfigurableServiceLocator?) which can be configured with the necessary dependencies. But how does this work in a designer context? Dependency Injection via properties Inject dependencies via properties. Provide default instances if they are necessary to show the component in a designer. Document which properties need to be injected. Inject dependencies with an Initialize method This is much like injection via properties but it keeps the list of dependencies that need to be injected in one place. This way the list of required dependencies is documented implicitly, and the compiler will assists you with errors when the list changes. Any idea what the best practice is here? How do you do it? edit: I have removed "(e.g. a WinForms UserControl)" since I intended the question to be about components in general. Components are all about inversion of control (see section 8.3.1 of the UMLv2 specification) so I don't think that "you shouldn't inject any services" is a good answer. edit 2: It took some playing with WPF and the MVVM pattern to finally "get" Mark's answer. I see now that visual controls are indeed a special case. As for using non-visual components on designer surfaces, I think the .NET component model is fundamentally incompatible with dependency injection. It appears to be designed around the service locator pattern instead. Maybe this will start to change with the infrastructure that was added in .NET 4.0 in the System.ComponentModel.Composition namespace.

  Read the article

• CLR 4.0 inlining policy? (maybe bug with MethodImplOptions.NoInlining)

  - by ControlFlow

  I've testing some new CLR 4.0 behavior in method inlining (cross-assembly inlining) and found some strage results: Assembly ClassLib.dll: using System.Diagnostics; using System; using System.Reflection; using System.Security; using System.Runtime.CompilerServices; namespace ClassLib { public static class A { static readonly MethodInfo GetExecuting = typeof(Assembly).GetMethod("GetExecutingAssembly"); public static Assembly Foo(out StackTrace stack) // 13 bytes { // explicit call to GetExecutingAssembly() stack = new StackTrace(); return Assembly.GetExecutingAssembly(); } public static Assembly Bar(out StackTrace stack) // 25 bytes { // reflection call to GetExecutingAssembly() stack = new StackTrace(); return (Assembly) GetExecuting.Invoke(null, null); } public static Assembly Baz(out StackTrace stack) // 9 bytes { stack = new StackTrace(); return null; } public static Assembly Bob(out StackTrace stack) // 13 bytes { // call of non-inlinable method! return SomeSecurityCriticalMethod(out stack); } [SecurityCritical, MethodImpl(MethodImplOptions.NoInlining)] static Assembly SomeSecurityCriticalMethod(out StackTrace stack) { stack = new StackTrace(); return Assembly.GetExecutingAssembly(); } } } Assembly ConsoleApp.exe using System; using ClassLib; using System.Diagnostics; class Program { static void Main() { Console.WriteLine("runtime: {0}", Environment.Version); StackTrace stack; Console.WriteLine("Foo: {0}\n{1}", A.Foo(out stack), stack); Console.WriteLine("Bar: {0}\n{1}", A.Bar(out stack), stack); Console.WriteLine("Baz: {0}\n{1}", A.Baz(out stack), stack); Console.WriteLine("Bob: {0}\n{1}", A.Bob(out stack), stack); } } Results: runtime: 4.0.30128.1 Foo: ClassLib, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null at ClassLib.A.Foo(StackTrace& stack) at Program.Main() Bar: ClassLib, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null at ClassLib.A.Bar(StackTrace& stack) at Program.Main() Baz: at Program.Main() Bob: ClassLib, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null at Program.Main() So questions are: Why JIT does not inlined Foo and Bar calls as Baz does? They are lower than 32 bytes of IL and are good candidates for inlining. Why JIT inlined call of Bob and inner call of SomeSecurityCriticalMethod that is marked with the [MethodImpl(MethodImplOptions.NoInlining)] attribute? Why GetExecutingAssembly returns a valid assembly when is called by inlined Baz and SomeSecurityCriticalMethod methods? I've expect that it performs the stack walk to detect the executing assembly, but stack will contains only Program.Main() call and no methods of ClassLib assenbly, to ConsoleApp should be returned.

  Read the article

• Complex sound handling (I.E. pitch change while looping)

  - by Matthew

  Hi everyone I've been meaning to learn Java for a while now (I usually keep myself in languages like C and Lua) but buying an android phone seems like an excellent time to start. now after going through the lovely set of tutorials and a while spent buried in source code I'm beginning to get the feel for it so what's my next step? well to dive in with a fully featured application with graphics, sound, sensor use, touch response and a full menu. hmm now there's a slight conundrum since i can continue to use cryptic references to my project or risk telling you what the application is but at the same time its going to make me look like a raving sci-fi nerd so bare with me for the brief... A semi-working sonic screwdriver (oh yes!) my grand idea was to make an animated screwdriver where sliding the controls up and down modulate the frequency and that frequency dictates the sensor data it returns. now I have a semi-working sound system but its pretty poor for what its designed to represent and I just wouldn't be happy producing a sub-par end product whether its my first or not. the problem : sound must begin looping when the user presses down on the control the sound must stop when the user releases the control when moving the control up or down the sound effect must change pitch accordingly if the user doesn't remove there finger before backing out of the application it must plate the casing of there device with gold (Easter egg ;P) now I'm aware of how monolithic the first 3 look and that's why I would really appreciate any help I can get. sorry for how bad this code looks but my general plan is to create the functional components then refine the code later, no good painting the walls if the roofs not finished. here's my user input, he set slide stuff is used in the graphics for the control @Override public boolean onTouchEvent(MotionEvent event) { //motion event for the screwdriver view if(event.getAction() == MotionEvent.ACTION_DOWN) { //make sure the users at least trying to touch the slider if (event.getY() > SonicSlideYTop && event.getY() < SonicSlideYBottom) { //power setup, im using 1.5 to help out the rate on soundpool since it likes 0.5 to 1.5 SonicPower = 1.5f - ((event.getY() - SonicSlideYTop) / SonicSlideLength); //just goes into a method which sets a private variable in my sound pool class thing mSonicAudio.setPower(1, SonicPower); //this handles the slides graphics setSlideY ( (int) event.getY() ); @Override public boolean onTouchEvent(MotionEvent event) { //motion event for the screwdriver view if(event.getAction() == MotionEvent.ACTION_DOWN) { //make sure the users at least trying to touch the slider if (event.getY() > SonicSlideYTop && event.getY() < SonicSlideYBottom) { //power setup, im using 1.5 to help out the rate on soundpool since it likes 0.5 to 1.5 SonicPower = 1.5f - ((event.getY() - SonicSlideYTop) / SonicSlideLength); //just goes into a method which sets a private variable in my sound pool class thing mSonicAudio.setPower(1, SonicPower); //this handles the slides graphics setSlideY ( (int) event.getY() ); //this is from my latest attempt at loop pitch change, look for this in my soundPool class mSonicAudio.startLoopedSound(); } } if(event.getAction() == MotionEvent.ACTION_MOVE) { if (event.getY() > SonicSlideYTop && event.getY() < SonicSlideYBottom) { SonicPower = 1.5f - ((event.getY() - SonicSlideYTop) / SonicSlideLength); mSonicAudio.setPower(1, SonicPower); setSlideY ( (int) event.getY() ); } } if(event.getAction() == MotionEvent.ACTION_UP) { mSonicAudio.stopLoopedSound(); SonicPower = 1.5f - ((event.getY() - SonicSlideYTop) / SonicSlideLength); mSonicAudio.setPower(1, SonicPower); } return true; } and here's where those methods end up in my sound pool class its horribly messy but that's because I've been trying a ton of variants to get this to work, you will also notice that I begin to hard code the index, again I was trying to get the methods to work before making them work well. package com.mattster.sonicscrewdriver; import java.util.HashMap; import android.content.Context; import android.media.AudioManager; import android.media.SoundPool; public class SoundManager { private float mPowerLvl = 1f; private SoundPool mSoundPool; private HashMap mSoundPoolMap; private AudioManager mAudioManager; private Context mContext; private int streamVolume; private int LoopState; private long mLastTime; public SoundManager() { } public void initSounds(Context theContext) { mContext = theContext; mSoundPool = new SoundPool(2, AudioManager.STREAM_MUSIC, 0); mSoundPoolMap = new HashMap<Integer, Integer>(); mAudioManager = (AudioManager)mContext.getSystemService(Context.AUDIO_SERVICE); streamVolume = mAudioManager.getStreamVolume(AudioManager.STREAM_MUSIC); } public void addSound(int index,int SoundID) { mSoundPoolMap.put(1, mSoundPool.load(mContext, SoundID, 1)); } public void playUpdate(int index) { if( LoopState == 1) { long now = System.currentTimeMillis(); if (now > mLastTime) { mSoundPool.play(mSoundPoolMap.get(1), streamVolume, streamVolume, 1, 0, mPowerLvl); mLastTime = System.currentTimeMillis() + 250; } } } public void stopLoopedSound() { LoopState = 0; mSoundPool.setVolume(mSoundPoolMap.get(1), 0, 0); mSoundPool.stop(mSoundPoolMap.get(1)); } public void startLoopedSound() { LoopState = 1; } public void setPower(int index, float mPower) { mPowerLvl = mPower; mSoundPool.setRate(mSoundPoolMap.get(1), mPowerLvl); } } ah ha! I almost forgot, that looks pretty ineffective but I omitted my thread which actuality updates it, nothing fancy it just calls : mSonicAudio.playUpdate(1); thanks in advance, Matthew

  Read the article

• Multiprogramming in Django, writing to the Database

  - by Marcus Whybrow

  Introduction I have the following code which checks to see if a similar model exists in the database, and if it does not it creates the new model: class BookProfile(): # ... def save(self, *args, **kwargs): uniqueConstraint = {'book_instance': self.book_instance, 'collection': self.collection} # Test for other objects with identical values profiles = BookProfile.objects.filter(Q(**uniqueConstraint) & ~Q(pk=self.pk)) # If none are found create the object, else fail. if len(profiles) == 0: super(BookProfile, self).save(*args, **kwargs) else: raise ValidationError('A Book Profile for that book instance in that collection already exists') I first build my constraints, then search for a model with those values which I am enforcing must be unique Q(**uniqueConstraint). In addition I ensure that if the save method is updating and not inserting, that we do not find this object when looking for other similar objects ~Q(pk=self.pk). I should mention that I ham implementing soft delete (with a modified objects manager which only shows non-deleted objects) which is why I must check for myself rather then relying on unique_together errors. Problem Right thats the introduction out of the way. My problem is that when multiple identical objects are saved in quick (or as near as simultaneous) succession, sometimes both get added even though the first being added should prevent the second. I have tested the code in the shell and it succeeds every time I run it. Thus my assumption is if say we have two objects being added Object A and Object B. Object A runs its check upon save() being called. Then the process saving Object B gets some time on the processor. Object B runs that same test, but Object A has not yet been added so Object B is added to the database. Then Object A regains control of the processor, and has allready run its test, even though identical Object B is in the database, it adds it regardless. My Thoughts The reason I fear multiprogramming could be involved is that each Object A and Object is being added through an API save view, so a request to the view is made for each save, thus not a single request with multiple sequential saves on objects. It might be the case that Apache is creating a process for each request, and thus causing the problems I think I am seeing. As you would expect, the problem only occurs sometimes, which is characteristic of multiprogramming or multiprocessing errors. If this is the case, is there a way to make the test and set parts of the save() method a critical section, so that a process switch cannot happen between the test and the set?

  Read the article

• Linq to sql C# updating reference Tables

  - by Laurence Burke

  ok reclarification I am adding a new address and I know the structure as AddressID = PK and all other entities are non nullable. Now on insert of a new row the addrID Pk is autogened and I am wondering if I would have to get that to create a new row in the referencing table or does that automatically get generated also. also I want to be able to repopulate the dropdownlist that lists the current employee's addresses with the newly created address. static uint _curEmpID; protected void btnAdd_Click(object sender, EventArgs e) { if (txtZip.Text != "" && txtAdd1.Text != "" && txtCity.Text != "") { TestDataClassDataContext dc = new TestDataClassDataContext(); Address addr = new Address() { AddressLine1 = txtAdd1.Text, AddressLine2 = txtAdd2.Text, City = txtCity.Text, PostalCode = txtZip.Text, StateProvinceID = Convert.ToInt32(ddlState.SelectedValue) }; dc.Addresses.InsertOnSubmit(addr); lblSuccess.Visible = true; lblErrMsg.Visible = false; dc.SubmitChanges(); // // TODO: add reference from new address to CurEmp Table // SetAddrList(); } else { lblErrMsg.Text = "Invalid Input"; lblErrMsg.Visible = true; } } protected void ddlAddList_SelectedIndexChanged(object sender, EventArgs e) { lblErrMsg.Visible = false; lblSuccess.Visible = false; TestDataClassDataContext dc = new TestDataClassDataContext(); dc.ObjectTrackingEnabled = false; if (ddlAddList.SelectedValue != "-1") { var addr = (from a in dc.Addresses where a.AddressID == Convert.ToInt32(ddlAddList.SelectedValue) select a).FirstOrDefault(); txtAdd1.Text = addr.AddressLine1; txtAdd2.Text = addr.AddressLine2; txtCity.Text = addr.City; txtZip.Text = addr.PostalCode; ddlState.SelectedValue = addr.StateProvinceID.ToString(); btnSubmit.Visible = true; btnAdd.Visible = false; } else { txtAdd1.Text = ""; txtAdd2.Text = ""; txtCity.Text = ""; txtZip.Text = ""; btnAdd.Visible = true; btnSubmit.Visible = false; } } protected void SetAddrList() { TestDataClassDataContext dc = new TestDataClassDataContext(); dc.ObjectTrackingEnabled = false; var addList = from addr in dc.Addresses from eaddr in dc.EmployeeAddresses where eaddr.EmployeeID == _curEmpID && addr.AddressID == eaddr.AddressID select new { AddValue = addr.AddressID, AddText = addr.AddressID, }; ddlAddList.DataSource = addList; ddlAddList.DataValueField = "AddValue"; ddlAddList.DataTextField = "AddText"; ddlAddList.DataBind(); ddlAddList.Items.Add(new ListItem("<Add Address>", "-1")); } OK I am hoping that I did not include too much code. I would really appreciate any other comments about I could otherwise improve this code in any other ways also.

  Read the article

• Ruby on Rails check box not updating on form submission

  - by user284194

  I have an entries controller that allows users to add contact information the website. The user-submitted information isn't visible to users until the administrator checks a check box and submits the form. So basically my problem is that if I check the check box as an administrator while initially creating an entry (entries#new) the entry will be publicly visible as expected, but if a non-admin user creates an entry (the normal user view doesn't include the 'live' check box, only the admin one does) then that entry is stuck in limbo because the entries#edit view for some reason doesn't update the boolean check box value when logged in as an admin. entries#new view: <% form_for(@entry) do |f| %> <%= f.error_messages %> Name<br /> <%= f.text_field :name %> Mailing Address<br /> <%= f.text_field :address %> #... <%- if current_user -%> <%= f.label :live %><br /> <%= f.check_box :live %> <%- end -%> <%= f.submit 'Create' %> <% end %> entries#edit (only accessible by admin) view: <% form_for(@entry) do |f| %> <%= f.error_messages %> <%= f.label :name %><br /> <%= f.text_field :name %> Mailing Address<br /> <%= f.text_field :address %> <%= f.label :live %><br /> <%= f.check_box :live %> <%= f.submit 'Update' %> <% end %> Any ideas as to why an administrator can't update the :live check box from the edit view? I would greatly appreciate any suggestions. I'm new to rails. I can post more code if it's needed. Thanks for reading my question.

  Read the article

• symfony/zend integration - blank screen

  - by user142176

  Hi, I need to use ZendAMF on a symfony project and I'm currently working on integrating the two. I have a frontend app with two modules, one of which is 'gateway' - the AMF gateway. In my frontend app config, I have the following in the configure function: // load symfony autoloading first parent::initialize(); // Integrate Zend Framework require_once('[MY PATH TO ZEND]\Loader.php'); spl_autoload_register(array('Zend_Loader', 'autoload')); The executeIndex function my the gateway actions.class.php looks like this // No Layout $this->setLayout(false); // Set MIME Type $this->getResponse()->setContentType('application/x-amf; charset='.sfConfig::get('sf_charset')); // Disable cause this is a non-html page sfConfig::set('sf_web_debug', false); // Create AMF Server $server = new Zend_Amf_Server(); $server->setClass('MYCLASS'); echo $server->handle(); return sfView::NONE; Now when I try to visit the url for the gateway module, or even the other module which was working perfectly fine until this attempt, I only see a blank screen, with not even the symfony dev bar loaded. Oddly enough, my symfony logs are not being updated as well, which suggests that Synfony is not even being 'reached'. So presumably the error has something to do with Zend, but I have no idea how to figure out what the error could be. One thing I do know for sure is that this is not a file path error, because if I change the path in the following line (a part of frontendConfiguration as shown above), I get a Zend_Amf_Server not found error. So the path must be correct. Also if I comment out this very same line, the second module resumes to normality, and my gateway broadcasts a blank x-amf stream. spl_autoload_register(array('Zend_Loader', 'autoload')); Does anyone have any tips on how I could attach this problem? Thanks P.S. I'm currently running an older version of Zend, which is why I am using Zend_Loader instead of Zend_autoLoader (I think). But I've tried switching to the new lib, but the error still remains. So it's not a version problem as well.

  Read the article

• Is it possible to reliably auto-decode user files to Unicode? [C#]

  - by NVRAM

  I have a web application that allows users to upload their content for processing. The processing engine expects UTF8 (and I'm composing XML from multiple users' files), so I need to ensure that I can properly decode the uploaded files. Since I'd be surprised if any of my users knew their files even were encoded, I have very little hope they'd be able to correctly specify the encoding (decoder) to use. And so, my application is left with task of detecting before decoding. This seems like such a universal problem, I'm surprised not to find either a framework capability or general recipe for the solution. Can it be I'm not searching with meaningful search terms? I've implemented BOM-aware detection (http://en.wikipedia.org/wiki/Byte_order_mark) but I'm not sure how often files will be uploaded w/o a BOM to indicate encoding, and this isn't useful for most non-UTF files. My questions boil down to: Is BOM-aware detection sufficient for the vast majority of files? In the case where BOM-detection fails, is it possible to try different decoders and determine if they are "valid"? (My attempts indicate the answer is "no.") Under what circumstances will a "valid" file fail with the C# encoder/decoder framework? Is there a repository anywhere that has a multitude of files with various encodings to use for testing? While I'm specifically asking about C#/.NET, I'd like to know the answer for Java, Python and other languages for the next time I have to do this. So far I've found: A "valid" UTF-16 file with Ctrl-S characters has caused encoding to UTF-8 to throw an exception (Illegal character?) (That was an XML encoding exception.) Decoding a valid UTF-16 file with UTF-8 succeeds but gives text with null characters. Huh? Currently, I only expect UTF-8, UTF-16 and probably ISO-8859-1 files, but I want the solution to be extensible if possible. My existing set of input files isn't nearly broad enough to uncover all the problems that will occur with live files. Although the files I'm trying to decode are "text" I think they are often created w/methods that leave garbage characters in the files. Hence "valid" files may not be "pure". Oh joy. Thanks.

  Read the article

< Previous Page | 508 509 510 511 512 513 514 515 516 517 518 519  | Next Page >