Search Results

Search found 68249 results on 2730 pages for 'sudo work'.

Page 513/2730 | < Previous Page | 509 510 511 512 513 514 515 516 517 518 519 520  | Next Page >

  • install android sdk on kubuntu

    - by dot
    I'm trying to follow the instructions for installing the android sdk found here: http://developer.android.com/sdk/installing/adding-packages.html After i've unpackaged and i run the android program under tools, I don't get all the options that I'm supposed to. The only 2 folders that show up are tools, and extras. Under tools, it only shows the "Android SDK Tools" with the status "Installed". Under the "extas" folder, I have nothing. I've made sure that my http: proxy settings are correct. And I've checked the logs. there are no errors. According to the android developer site, I'm supposed to install the SDK platform tools. has anyone tried this on ubuntu? I also checked and saw others were instructed to do an apt-get install ia32-libs but it failed for me. Besides which, I am running the 32bit os... so I don't think i would need to install that... ?? I've also tried following the instructions found here: http://forums.team-nocturnal.com/showthread.php/772 But... I can't seem to add the personal archive nilarimogard without getting an error message. when i attempt: sudo add-apt-repository ppa:nilarimogard/webupd8 I get the message: Traceback (most recent call last): File "/usr/bin/add-apt-repository", line 125, in ppa_info = get_ppa_info_from_lp(user, ppa_name) File "/usr/lib/python2.7/dist-packages/softwareproperties/ppa.py", line 80, in get_ppa_info_from_lp curl.perform() pycurl.error: (7, "couldn't connect to host") root@jll:/home/me/Documents# any suggestions? Thanks.

    Read the article

  • No sound after upgrading to Ubuntu 11.10 from win7

    - by Tilman
    just as a prefix to my question, i'd like to note that i'm just now entering the world of Linux (unless you count my android, but that's a very different experience...) i have two computers now that run Ubuntu 11.10, the first of which i've had very little problems with, aside from figuring out the basics. the second, from which i'm writing this question, has (up to this point) only had one problem.... no sound. i've read a couple questions similiar and found little help as the component catalog doesn't have my computer listed. (in fact i'm not suprised this is a pos i had my mom grab from her work before they officially closed the doors behind them) had perfect sound before hand, and no sound now. sudo lspci -v brings up 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) Subsystem: Intel Corporation Device d608 Flags: bus master, fast devsel, latency 0, IRQ 45 Memory at ff980000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel any help would be greatly appreciated, me and my gf just wanna watch a damn movie lol

    Read the article

  • Wireless drivers

    - by Kencer
    The results for my laptop are as below. How will i install wireless drivers and graphics? $ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 02:00.0 Network controller: Broadcom Corporation Device 4365 (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) $ sudo lshw -c network *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f0500000-f0507fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 07 serial: 3c:97:0e:85:c0:0d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=172.16.96.36 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0404000-f0404fff memory:f0400000-f0403fff $ rfkill list all 0: tpacpi_bluetooth_sw: Bluetooth Soft blocked: no Hard blocked: no

    Read the article

  • Can't install Ubuntu Software Center

    - by byf-ferdy
    I'm running Ubuntu 13.10 32bit with Gnome 3.8 but am missing the Ubuntu Software Center. I tried to install it via terminal: $ sudo apt-get install software-center But that tells me that dependencies are not met The following packages have unmet dependencies: software-center : Depends: gir1.2-webkit-3.0 but it is not going to be installed gir1.2-webkit-3.0 depends on gir1.2-javascriptcoregtk-3.0 of version 1.10.2-0ubuntu2. But that package is only available as version 2.0.4-2~ubuntu13.04. I am missing the Ubuntu Software Center as well as the Update Manager and the packages update-notifyer and ubuntu-release-upgrader-gtk. How can I install the packages with correct dependencies? Edit: Output of apt-cache policy gir1.2-javascriptcoregtk-3.0: gir1.2-javascriptcoregtk-3.0: Installed: 2.0.4-2~ubuntu13.04.1 Candidate: 2.0.4-2~ubuntu13.04.1 Version table: *** 2.0.4-2~ubuntu13.04.1 0 100 /var/lib/dpkg/status 1.10.2-0ubuntu2 0 500 http://de.archive.ubuntu.com/ubuntu/ saucy/main i386 Packages My sources.list: deb http://de.archive.ubuntu.com/ubuntu/ saucy main restricted universe multiverse deb http://de.archive.ubuntu.com/ubuntu/ saucy-security main restricted universe multiverse deb http://de.archive.ubuntu.com/ubuntu/ saucy-updates main restricted universe multiverse deb http://archive.canonical.com/ubuntu saucy partner deb http://extras.ubuntu.com/ubuntu saucy main # spotify deb http://repository.spotify.com stable non-free Spotify I added myself.

    Read the article

  • Any danger in using the Wine workaround in 12.04?

    - by TrailRider
    To run certain Windows programs in WINE you need to this workaround: echo 0|sudo tee /proc/sys/kernel/yama/ptrace_scope According to the support websites, this is due to a bug in the Ubuntu kernel that prevents ptrace and WINE playing well together. Using the above command you set the ptrace to 0 which according the research I've done(don't ask me which websites, I have seem a lot of them), ptrace has to do with the interactions between programs. The 0 setting is more permissive than the 1. I have to assume that there was a good reason Ubuntu wanted the ptrace=1 so this leads me back to the short form of the question. Are there any risks involved in setting ptrace=0. Lower security? problems debugging? any others that I haven't thought of??? P.S. for anybody reading this that wonders what the bug causes, the Windows programs will fail to open at all, in the System Monitor you will see many instances of the program trying to open and then they will eventually all quit and if you run the progam for the terminal you will get an error that tells you that the maximum number of program instances has been reached.

    Read the article

  • Cannot view, use, or open CDs or DVDs in Ubuntu 12.04

    - by user67592
    I am fairly new to Ubuntu 12.04 and I have encountered a rather irritating problem. Whenever I insert a CD or DVD (whether it have data, music, movies, or nothing at all), nothing pops up saying "you have inserted a CD", "play with Rhythmbox?" etc. It doesn't show the CD in the launcher/dock or anything of the sort. This is especially peculiar because not only do I have a standard IDE built-in optical drive, but I have an external USB optical drive. Neither work. In addition, whenever I go to "Computer///" and I click (double click, right click, or even left click) on "CD/DVD Drive" nothing happens, when I right click and select "Open" nothing happens either [for either of the two drives (both are listed in Computer///)] And if I insert a blank disk and go to a disk burning program such as Brasero, and try to burn to the drive it detects no CDs or DVDs of any kind. I'm rather stumped and can't seem to find a question similar to this. :( Thanks for all your help in advance!! :) ~Preston Output of sudo lshw *-cdrom description: DVD-RAM writer product: CD/DVDW TS-H652M vendor: TSSTcorp physical id: 0.0.0 bus info: scsi@5:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 0414 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-cdrom description: DVD reader product: DVD Writer 300n vendor: HP physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/cdrom2 logical name: /dev/cdrw2 logical name: /dev/dvd2 logical name: /dev/sr1 version: 1.25 serial: [ capabilities: removable audio cd-r cd-rw dvd configuration: status=nodisc

    Read the article

  • polipo E: Sub-process /usr/bin/dpkg returned an error code (1)

    - by ICXC
    @me:/home$ sudo apt-get install polipo Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: polipo 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 198 kB of archives. After this operation, 799 kB of additional disk space will be used. Get:1 http://sy.archive.ubuntu.com/ubuntu/ precise/universe polipo amd64 1.0.4.1-1.1 [198 kB] Fetched 198 kB in 2s (97.5 kB/s) Selecting previously unselected package polipo. (Reading database ... 169595 files and directories currently installed.) Unpacking polipo (from .../polipo_1.0.4.1-1.1_amd64.deb) ... Processing triggers for doc-base ... Processing 1 added doc-base file... Processing triggers for man-db ... Processing triggers for install-info ... Processing triggers for ureadahead ... Setting up polipo (1.0.4.1-1.1) ... Starting polipo: Couldn't open config file /etc/polipo/config: 2. invoke-rc.d: initscript polipo, action "start" failed. ****dpkg: error processing polipo (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: polipo E: Sub-process /usr/bin/dpkg returned an error code (1)****

    Read the article

  • Where is my ram?

    - by gsedej
    I have 2GB installed on my machine running Ubuntu 12.04. After some time of use, I see much of my RAM used. The RAM does not free enough even though I closed all my programs. I included 2 screenshots. First is "Gnome system monitor" (all process) and second is "htop" (with sudo), both sorted by memory usage. From both you see, that it's not possible that all running apps takes together 1GB of memory. First 7 biggest programs sum 250, but others are much smaller (all can't sum even 100MB). The cache is 300MB (yellow ||| on htop) and is not included in 1GB used. Also 260MB is already on swap. (which actually makes 1,3GB of used memory) If i start Firefox (or Chrome) with many tabs, it has only 1GB available and not potentially 1,5 GB (assume 0,5GB is for system). When I need more ram, swapping happens. So where is my ram? Which program is using it? How can i free it, to be available for e.g. Firefox? Gnome system monitor htop

    Read the article

  • 13.10 Saucy login issues; black screen, loop, and freeze

    - by user135598
    Once upgraded to I 13.10 I was not able to get past the login screen. I had the black screen. Also; I can not log on with low graphics mode from recovery either. It makes no difference if I try default graphics driver or not. Then after running sudo install -f from recovery root prompt I got a login loop. I have purged fglrx, fglrx-legacy, and nvidia-current. I updated my repository with xorg-edgers and reinstalled nvidia-current. Now it semi-freezes at the login screen when I try to log on as my normal user. I say 'semi' because I can still use my mouse to click on the upper right hand Ubuntu logo and Shut Down or Restart the PC. I still cannot log on with my user name, but I can through the Guest login. While logged in as Guest I added a new user account with administrative privileges. I CAN log into this account without problem and from here am able to see that my .dmrc file in my original account reads: [Desktop] Session=XBMC I have changed 'Session=XBMC' to 'Session=ubuntu' and rebooted, but to no avail. The file resets itself and makes a backup of my changes. Any help would be greatly appreciated.

    Read the article

  • Trying to build/install patched gtk3-engines-oxygen to test bugfix, get shared changelog.Debian.gz is different from other instances of package

    - by andlabs
    I want to just quickly test the patch in this bug report to gtk3-engines-oxygen so it can go upstream. I could test it either temporarily or permanently; I would just like to do it. I currently have the package installed. So far, I've tried: $ mkdir /tmp/o # keep everything self-contained $ cd /tmp/o $ apt-get source gtk3-engines-oxygen $ cd oxygen-gtk3-1.3.5/ $ patch -p1 < /path/to/patchfile $ dpkg-source --commit # to make debuild happy (name 'layout'; just save the default; this is a test) $ debuild -us -uc # bypass signature checks $ sudo debi ../oxygen-gtk3_1.3.5-0ubuntu1_amd64.changes According to some people on #ubuntu-packaging, this is what I have to do. It's this last step that's the problem; I'm getting (Reading database ... 503333 files and directories currently installed.) Preparing to unpack gtk3-engines-oxygen_1.3.5-0ubuntu1_amd64.deb ... Unpacking gtk3-engines-oxygen:amd64 (1.3.5-0ubuntu1) over (1.3.5-0ubuntu1) ... dpkg: error processing archive gtk3-engines-oxygen_1.3.5-0ubuntu1_amd64.deb (--install): trying to overwrite shared '/usr/share/doc/gtk3-engines-oxygen/changelog.Debian.gz', which is different from other instances of package gtk3-engines-oxygen:amd64 Errors were encountered while processing: gtk3-engines-oxygen_1.3.5-0ubuntu1_amd64.deb debi: debpkg -i failed What's going on? How do I fix it? Or am I doing this completely wrong (and ergo so are they)? I'm using Kubuntu 14.04 amd64. Thanks.

    Read the article

  • Ubuntu 13.10, kernel 3.11 blank screen issue with hybrid graphics

    - by Lagerbaer
    On my HP Envy, which has both an Intel on-chip graphics card and an Nvidia Geforce: *-display UNCLAIMED description: 3D controller product: GK208M [GeForce GT 740M] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: cap_list configuration: latency=0 resources: memory:d2000000-d2ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:5000(size=128) memory:b2000000-b207ffff *-display description: VGA compatible controller product: 4th Gen Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 06 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:d3000000-d33fffff memory:c0000000-cfffffff ioport:6000(size=64) I have trouble with all newer kernels. I basically had to install 12.04 LTS and use their 3.5 kernel family to get the system to boot. The 3.8 from 12.10 or the newest 3.11 from Ubuntu 13.10 leave me with a black screen upon boot. On one occasion I did hear the "log in" sound, but the screen did not display anything. I have purged all nvidia drivers so I guess it should just use the intel drivers, but apparently this is all messed up with newer kernel versions. This is different from the other "nvidia boots into blank screen" bug in that I don't rely solely on an nvidia card. Surely the intel on-chip card should be supported and leave me with something different from a blank screen? Again, it only works with kernel versions 3.5.0-41-generic, not with the 3.11.0-12 one that ships with Ubuntu 13.10. When I go into the grub menu and change the boot options from 'quiet splash' to 'nomodeset' I am able to boot the system, but then I don't get any graphics and trying 'sudo service lightdm start' doesn't succeed (I get 100% CPU for apport, but this doesn't do anything either, so I kill it). Help, I'm all out of ideas. EDIT: Let me add that I'm using the EFI boot system and have a dual-boot installation with Windows 8.

    Read the article

  • Can certain system-hungry modules be disabled in Ubuntu?

    - by Ole Thomsen Buus
    Hi, Let me add some context: I am currently using Ubuntu 9.10 64-bit (Desktop) on a relatively powerful stationary PC (Intel Core i7 920, 12GB ram). My purpose is highspeed imaging with a pointgrey Grashopper machine-vision camera (for research, PhD project). This camera is capable of 200 fps at full VGA (640x480) resolution. The camera is connected using Firewire (1394b) and the drivers and software from Pointgrey works great. I have developed a console C++ application that can grap a certain number of frames to preallocated memory and after this also save the grapped frames to harddrive. Currently it works fine but sometimes I am observing a few framedrops (1-3). When this happens I reset the experiment and repeat the recording and usually i am lucky the second time with no framedrops (the camera-driver has a internal framecounter that I am using). Question: I usually go to tty1 and use "sudo service gdm stop" to disable the graphical frontend. It seems to release some memory though that is not my main concern. My concern is CPU resources. Are there other system hungry modules that can be disabled temporarily such that the CPU gets less busy on Ubuntu 9.10? At some point in the future I will update to 10.10. Should I perhaps option for the server edition instead? Thanks.

    Read the article

  • Bluetooth mouse no longer paired after resuming from suspend since upgrading to 13.10

    - by Korakys
    Since upgrading to 13.10 from 13.04 my mouse no longer connects via bluetooth. In settings it states that the mouse is not paired. Restarting bluetooth with sudo /etc/init.d/bluetooth restart does not help. Restarting the computer does fix the problem if bluetooth is restarted also with the previously mentioned command, but this is not ideal. The mouse worked fine prior to updating to 13.10. The computer is a ThinkPad X230 with a Broadcom 'BCM20702A0' bluetooth module (I think). When it is not working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:766129 acl:49888 sco:0 events:2233 errors:0 TX bytes:5953 acl:240 sco:0 commands:274 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'BCM20702A' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) When it is working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:253334 acl:16391 sco:0 events:842 errors:0 TX bytes:2519 acl:65 sco:0 commands:84 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) I am a relative novice with linux so don't ask me compile anything please, but I can use google.

    Read the article

  • "The volume filesystem root has only..."

    - by jcslzr
    I am having this problem in ubuntu 12.04, but I fin strange that when I go to /tmp it wont allow me to delete some files, with message "Operation not permitted" or "this file could not be handled because you dont have permissions to read it". It is only a PC and I have the root password. I was trying to get at least 2000 MB of free space on the root file system to upgrade to 12.10 and see if that resolved the problem. Currently free space on root file system is 190 MB. This is my output: root@jcsalazar-Vostro-3550:~# df Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda6 7688360 7112824 184984 98% / udev 2009288 4 2009284 1% /dev tmpfs 806636 1024 805612 1% /run none 5120 0 5120 0% /run/lock none 2016584 5316 2011268 1% /run/shm /dev/sda5 472036 255920 191745 58% /boot /dev/sda7 30758848 7085480 22110900 25% /home root@jcsalazar-Vostro-3550:~# sudo parted -l Model: ATA TOSHIBA MK3261GS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 106MB 105MB primary fat16 2 106MB 15.8GB 15.7GB primary ntfs boot 3 15.8GB 278GB 262GB primary ntfs 4 278GB 320GB 41.9GB extended 5 278GB 279GB 499MB logical ext4 6 279GB 287GB 7999MB logical ext4 7 287GB 319GB 32.0GB logical ext4 8 319GB 320GB 1443MB logical linux-swap(v1) I apprecciate any new ideas that can help me. Thnx Carlos

    Read the article

  • Google Chrome on Ubuntu 12.04 not rendering webpages correctly

    - by sumit_gt
    I am facing some serious web page rendering issues with Chrome. It is more prominent during javascript based animations and stuff on websites like youtube. I have tried removing chrome using (sudo apt-get purge google-chrome-stable) and then reinstalling it. But the problems still persist. The same webpages work correctly on firefox on ubuntu and chrome on windows. The problem only shows up when I use chrome on ubuntu. I think the issue has started after I updated to the latest version of Chrome. I have used Chrome previously on this machine without any problems. I have attached a image that demonstrates the issue. What could possibly be the problem? PS: here's the output of lshw -c video: *-display description: VGA compatible controller product: Madison [Radeon HD 5000M Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:46 memory:e0000000-efffffff memory:f0020000-f003ffff ioport:d000(size=256) memory:f0000000-f001ffff Here's the output of lspci -nn: output of lspci -nn

    Read the article

  • Setting up group disk quotas

    - by Ray
    I am hoping to get some advice in setting up disk quotas. So, I know about: Adding usrquota and grpquota on to /etc/fstab for the file systems that need to be managed. Using edquota to assign disk quotas to users. However, I need to do the last step for multiple users and edquota seems to be a bit troublesome. One solution that I have found is that I can do: sudo edquota -u foo -p bar. This will copy the disk quota of bar to user foo. I was wondering if this is the best solution? I tried setting up group disk quotas but they don't seem to be working. Are group quotas meant to help in the assignment of the same quota to multiple users? Or are they suppose to give a total limit to a set of users? For example, if users A, B, C are in group X then assigning a quota of 20 GB gives each user 20 GB or does it give 20 GB to the entire group X to divide up? I'm interested in doing the former, but not the latter. Right now, I've assigned group disk quotas and they aren't working. So, I guess it is due to my misunderstanding of group disk quotas... My problem is I want to easily give the same quota to multiple users; any suggestions on the best way to do this out of what I've tried above or anything else I may not have thought of? Thank you!

    Read the article

  • aplay -l says no soundcards found; alsaconf says no supported cords; yet /proc/asound contains cards

    - by nimasmi
    I am trying to get HDMI output using a Gainward Nvidia 210 512 MB on Ubuntu 10.04 Lucid Lynx. I have upgraded alsa-driver, alsa-lib and alsa-utils to 1.0.24 by building from source, thanks to this blog post. Some relevant output... user@box:~$ lspci | grep Audio 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 01:09.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) 01:09.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) 01:09.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) user@box:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. Compiled on Sep 15 2012 for kernel 2.6.32-42-generic (SMP). user@box:~$ ls /proc/asound` card0 cards hwdep NVidia oss seq version card1 devices modules NVidia_1 pcm timers user@box:~$ aplay -l aplay: device_list:240: no soundcards found... user@box:~$ sudo /sbin/alsa-utils start * Setting up ALSA... * warning: 'alsactl restore' failed with error message 'alsactl: set_control:1403: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted'... amixer: Invalid command! ...done. Any help appreciated. PS my video card is connected only through the PCI-E slot. I assume there is no extra audio connection required.

    Read the article

  • Broadcom Wireless Issues in Lubuntu 14.04

    - by ratxinxaxcage67
    I recently installed Lubuntu 14.04 on my parents' old laptop, and I've been having a super difficult time getting the Broadcom card up and running. I've been following this thread: Installing Broadcom Wireless Drivers ...but I'm still stuck. lspci -vnn | grep Network showed: 06:05.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 02) iwconfig showed: lo no wireless extensions. eth0 no wireless extensions. I've installed b43-firmware-installer and b43-fwcutter and also the linux-firmware-nonfree package. At boot, I keep getting a b43-phy0 error, so I tried sudo rmmod b43, and I got: rmmod: ERROR: Module b43 is not currently loaded I also tried: dmesg | grep b43 [ 17.318405] b43legacy-phy0: Broadcom 4306 WLAN found (core revision 4) [ 17.384870] b43legacy-phy0: Loading firmware b43legacy/ucode4.fw [ 18.046777] b43legacy ssb0:0: Direct firmware load failed with error -2 [ 18.046785] b43legacy ssb0:0: Falling back to user helper [ 18.047858] b43legacy-phy0 ERROR: Firmware file "b43legacy/ucode4.fw" not found or load failed. [ 18.047965] b43legacy-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 3). I went to url it told me to, but it didn't tell me to do anything I haven't already tried. Any help and/or suggestions would be greatly appreciated!

    Read the article

  • 10.04 Window manager not working

    - by jackg
    Using an old mx200 128Mb AGP card. Log in ok. Sometimes the top and bottom bars do not appear, sometimes one sometimes both sometimes none. The menus on firefox/thunderbird and others disappear when I move the pointer from the menu heading to the menu itself. I can't play you tube videos, nor pacman, so the world has ended as I know it. If I type sudo metacity --replace in a terminal the window manager seems to work fine. But I don't know how to make this permanent. One option was: System menupreferencessessions In the sessions tab make sure that "automatically save changes to session" is checked. I don't have a sessions option in the preferences menu. So...? Must be a line of code in a terminal I can use to get round this. I have not upgraded to Ubuntu 11... because the graphics card is so old that I cannot get any decent screen resolutions when I do. On 10.04 I disable the Nvidia driver for the same reason and use 1024x768. Ta

    Read the article

  • How do I bridge my wireless to my wired connection?

    - by gatoatigrado
    I want to bridge the wireless connection with the wired connection. The wireless is the host and the wired is the client, so to speak. Internet sharing (inet <--> wifi <--> ethernet) I tried to bridge my ethernet connection by going to network manager edit connections wired edit IPv4 settings shared to other computers Screenshots However, it seems to automatically disconnect half a second after it says "connection established"! edit 2 got the network manager logs, it seems the address is in use. See http://pastebin.com/DjqRshxW , line 45. nm-tool output is here: http://pastebin.com/x5Aci5V1 . I tried firestarter, as mentioned in another thread, and no luck. I don't have time to bother with a dozen command line tricks, unless is copy & pasting a shell script... so please suggest ways that use GUIs and/or won't leave my computer in a confused state (e.g. disabling network manager, manually connecting to a WPA network, installing brutils, etc.). edit: one idea that would work, if it's possible -- is there a way to share connections via SSH and SOCKS5? I'd need to do this at a system-wide level though; I only know how to do it through the browser now. Then, I could run ifconfig eth0 192.168.4.1 on the computer sharing the inet, and ifconfig eth0 192.168.4.2 on the computer I'm trying to share with; I know this does work for host-to-host transfers. edit 3 If I run sudo killall dnsmasq, then nothing is using the 10.42.43.1 address the network manager sharing wants to use. But now it just takes longer to die, with error "NetworkManager[5935]: dnsmasq died with signal 9" [ http://pastebin.com/4FNtpugi ]. Looking at just the commands [ http://pastebin.com/1vrtQeWk ], maybe it's trying to route eth0 to itself? I'm not that familiar with networking things though.

    Read the article

  • Javascript is not loading

    - by Oden
    Hey, I've got a problem with JavaScript under Ubuntu, that drives me crazy. I'm using Gedit for my web sites since I'm an Ubuntu user. When I start a new website I create (usually with the gnome terminal) folder structure, and I copy the files I need into them. The next step is creating an index.html where I build the design and basic JavaScript functionality. JavaScript is stored in a sub-folder of the project and when i try to load one using the tag in the header, my whole page body disappears. If the source contains a script tag with its own body, and its not the first its code wont run. I've tried to solve the problem by setting chmod to 777 with sudo chmod -R 777 . but nothing changed. CSS is loading correctly, but JS isn't. I'm using the newest version of apache, no mod_rewrite stuff, but i get the same problem when I run the html from file (file:///...) Do anyone know how to solve this problem?

    Read the article

  • Error: kernel headers not found. (But they are in place)

    - by Guandalino
    I'm trying to install the Guest Additions in VirtualBox 4.04. Host OS is Ubuntu desktop 11.04 64bit, guest OS is Ubuntu server 11.10 64bit. $ sudo ./VBoxLinuxAdditions.run After some output this line is printed: The headers for the current running kernel were not found. But the headers are installed, at least accordingly to dpkg: $ dpkg --get-selections | grep linux-headers linux-headers-3.0.0-12 install linux-headers-3.0.0-12-server install linux-headers-server install The running kernel is: $ uname -a Linux foobar 3.0.0-12-server #20-Ubuntu SMP Fri Oct 7 16:36:30 UTC 2011 x86_64 x86_64 X86_64 GNU/Linux How do I fix things so that Guest Additions installer is able to find kernel headers? Update: added full output. The headers for the current running kernel were not found. If the module compilation fails then this could be the reason. Building the main Guest Additions module ...done. Building the shared folder support module ...fail! (Look at /var/log/vboxadd-install.log to find out what went wrong) Installing the Window System drivers ...fails! (Could not find the X.Org or XFree86 Window System). I don't care for fail #2, because that's a server and I don't need X server. But I need shared folder support. Some further detail: $ tail /val/log/vboxadd-install.log .......... cc1: some warnings being treated as errors make[2]: *** [/tmp/vbox.0/vfsmod.o] Error 1 make[1]: *** [_module_/tmp/vbox.0] Error 2 make: *** [vboxsf] Error 2

    Read the article

  • Nvidia GeForce Gt-520M-cn on intel dh61ww Ubuntu 12.04

    - by j goseeped
    hi people i hope you can help a little bit , i appreciate your time look: i have a this desktop i7 2600, 8gb ram ddr3, board intel dh61ww, Geforce Nvidia GT520-cn 2Gb ddr3, i just install ubuntu 64bits 12.04 kernel 3.2.0-23-generic , i want to setup two monitors samsung led 22" and get start mi video card 1) i download and installed nvidia driver 295.59 and also try with 302.17 to apt-update and upgrade, apt-get install build-essential linux-headers-$(uname -r), apt-get remove --purge nvidia*, apt-get remove --purge xserver-xorg-video-nouveau, vim /etc/modprobe.d/blacklist.conf blacklist vga16fb blacklist nouveau blacklist rivafb blacklist nvidiafb blacklist rivatv sh NVIDIA.run, sudo service lightdm start, reboot, nvidia-xorgconf 2)after reboot i get 800x600 and nvidia-settings say this. You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run nvidia-xconfig as root), and restart the X server. 3) i change a little bit xorg.conf to set up a resolution to work property 4) i dont have any image in the monito and i dont have any option on Nvidia X server settings lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 520] (rev a1) egrep -i 'glx|nvidia' /var/log/Xorg.0.log [ 12.005] (II) LoadModule: "glx" [ 12.005] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 12.575] (II) Module glx: vendor="NVIDIA Corporation" [ 12.585] (II) NVIDIA GLX Module 302.17 Tue Jun 12 16:22:45 PDT 2012 [ 12.585] (II) Loading extension GLX [ 13.037] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 13.044] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event10) [ 13.044] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9) glxinfo | grep direct Xlib: extension "GLX" missing on display ":0.0". Error: couldn't find RGB GLX visual or fbconfig sorry my english is no very well. and thanks guys

    Read the article

  • SteamCMD can't add files to my home directory

    - by Angle O'Saxon
    I'm trying to clean up the administration of some game servers I run on a Ubuntu box, part of which has been finally setting permissions properly so I can run the Steam console tool that controls updates and such. I had been running it as root using sudo, but I changed the permissions so that I can start it as a regular user rather than root. That bit seems to work fine, but now when SteamCMD actually starts, it errors with the following output ./steam.sh: line 24: /home/angleosaxon/.steampid: Permission denied Installing breakpad exception handler for appid(steam)/version(1334262703) SteamUpdater: Error: Couldn't create directory /home/angleosaxon/Steam/package, got error 13 [ 0%] Download complete. [----] Verifying installation... unlinked 0 orphaned pipes [----] !!! Fatal Error: Steam failed to load: *SteamStartEngine(0xbfa7cfa0) failed with error 1: Failed to open logfile /home/angleosaxon/Steam/steam.log Leaving aside the question of why it wants to add this information to my home directory, why is it getting access denied errors? As I understand it, since it's being run by my account, it operates with my permissions, so it should be able to read/write from my home directory, shouldn't it? This is the command I'm using to run it: /opt/steamcmd/steam.sh "+login UserAccount \"This is not my actual password.\"" +force_install_dir $ServerDir "+app_update 215360 validate" +quit

    Read the article

  • Cryptswap not mounted?

    - by woody
    I believe i have my swap set up but am not sure because on start up it says that it is something along the lines of "could not mount /dev/mapper/cryptswap1 M for manual S for skip". But it appears to be mounted. When i run free -m the output is: total used free shared buffers cached Mem: 3887 769 3117 0 54 348 -/+ buffers/cache: 366 3520 Swap: 4026 0 4026 and sudo bklid is: /dev/sda1: UUID="9fb3ccd6-3732-4989-bfa4-e943a09f1153" TYPE="ext4" /dev/mapper/cryptswap1: UUID="bd9fe154-8621-48b3-95d2-ae5c91f373fd" TYPE="swap" and cat /etc/crypttab is: cryptswap1 /dev/sda5 /dev/urandom swap,cipher=aes-cbc-essiv:sha256 my /etc/fstab is: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=9fb3ccd6-3732-4989-bfa4-e943a09f1153 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation #UUID=bb0e378e-8742-435a-beda-ae7788a7c1b0 none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 The file /etc/polkit-1/localauthority/50-local.d/com.ubuntu.enable-hibernate.pkla already exists and its contents are: [Re-enable hibernate by default] Identity=unix-user:* Action=org.freedesktop.upower.hibernate ResultActive=yes Is my swap not setup correctly or is it not mounting?

    Read the article

< Previous Page | 509 510 511 512 513 514 515 516 517 518 519 520  | Next Page >