Search Results

Search found 59278 results on 2372 pages for 'time estimation'.

Page 514/2372 | < Previous Page | 510 511 512 513 514 515 516 517 518 519 520 521  | Next Page >

• So my employer wants me to do less programming and focus on IT support

  - by Rich

  I was hired into a non tech company's IT department as a programmer a few years back, and after several rounds of lay offs, we're down to a skeleton crew. I've saved the company hundreds of thousands of dollars with my projects and management has been happy with them (although most of the stakeholders have since left the company). Management now wants me to limit the programming that I do and spend most of my time on IT support: putting out fires, dealing with vendors, outsourced contractors, supporting company systems, managing projects, etc. I am a little burnt out on programming since I've been pushed pretty hard for the past several years. However, I'm not sure if this is a good career move in the long run. I'm a decent programmer (and also good with databases) but not obsessed with it to the point of coding outside of work. I'm approaching my mid 30s and there's potential ageism to deal with down the line. While I'm fortunate to have survived the lay offs, it sorta feels like my job is being "dumbed down". I have both good technical skills and people skills...but it doesn't take a genius to do what I'm doing now. And my success is being increasingly linked to others' performance rather than my own... Just looking for some advice. Is it time to move on? That's not really an easy thing to do since I'd likely have to move to another area to find another comparable tech job. Should I go after another pure technical role? Or should I stay and try to make this work? People say do what you "enjoy" but it doesn't really matter to me as long as I'm getting paid. Also the ageism thing is on the horizon and could be an issue eventually. I'm making a decent (but not great) salary. Should I chase money and maximize my income while I still have a chance? Or be happy with a moderate salary and 40 hour work week?

  Read the article

• How are objects modelled in a functional programming language?

  - by Giorgio

  In an answer to this question (written by Pete) there are some considerations about OOP versus FP. In particular, it is suggested that FP languages are not very suitable for modelling (persistent) objects that have an identity and a mutable state. I was wondering if this is true or, in other words, how one would model objects in a functional programming language. From my basic knowledge of Haskell I thought that one could use monads in some way, but I really do not know enough on this topic to come up with a clear answer. So, how are entities with an identity and a mutable persistent state normally modelled in a functional language? EDIT Here are some further details to clarify what I have in mind. Take a typical Java application in which I can (1) read a record from a database table into a Java object, (2) modify the object in different ways, (3) save the modified object to the database. How would this be implemented e.g. in Haskell? I would initially read the record into a record value (defined by a data definition), perform different transformations by applying functions to this initial value (each intermediate value is a new, modified copy of the original record) and then write the final record value to the database. Is this all there is to it? How can I ensure that at each moment in time only one copy of the record is valid / accessible? One does not want to have different immutable values representing different snapshots of the same object to be accessible at the same time.

  Read the article

• Is there a way to save MS Word document as HTML w/o the ms proprietary stuff?

  - by sequoia mcdowell

  So normally I wouldn't use this feature ("Save as Web Page") but I have large documents from clients they just want put on their site as HTML, and formatting it all by hand seems like a waste of time. I have tried "save as webpage" in Word 2007, but it produces all sorts of bad stuff. To wit: <b style='mso-bidi-font-weight:normal'> <span style="mso-spacerun: yes"> as well as a large block of XML formatting info: <!--[if gte mso 9]><xml> <o:DocumentProperties> <o:Subject> </o:Subject> <o:Author> </o:Author> <o:Keywords> </o:Keywords> ... As I said, formatting it all by hand seems like a waste of time, but the way MS exports currently just has too much cruft. Is there a way to export MS Word doc as html without all this?

  Read the article

• Korea&rsquo;s Anti Abortion / Pro Life Movement

  - by Randy Walker

  The South Korean government is in dire straits.  The national birth rate continues to decline and as the population grows older, there aren’t enough children being born to support the country long term.  The social issues of post Korean War are coming back to haunt the empowered nation.  Being torn apart by the Korean War (nicknamed the forgotten war in America) and with a nation facing starvation, South Korea allowed hundreds of thousands of their children to be adopted abroad.  This has created a problem of epidemic proportions, essentially devaluing life in Korea and child rearing. In an effort to encourage birth rates, the government encouraged their workers to go home early and procreate by turning off the lights in buildings.  Something unknown to me, was the illegalization of abortion except in special cases. According to the this article, http://joongangdaily.joins.com it’s working.  Abortions are down and women are being encouraged to give birth.  However the flip side is illegal risky abortions are on the rise, with potential back alley abortions looming.  But with a nation facing it’s potential implosion, it has to continue it’s efforts to encourage mothers to give birth. Many of the issues that America has faced is in stark contrast to South Korea.  Abortion has been a generally accepted procedure for some time.  If you’ll recall, I mentioned South Korea devalued their children.  But the nation’s problems lie so much deeper.  Being an Asian nation, saving “face” is an important aspect of life.  And being an unwed mother disgraces the family.  Living as a single mother in South Korea is a difficult life.  Most married mothers stay at home to take care of the children.  Being a shunned single mother that has a hard time getting a job (because you are a single mother) and affording child care isn’t like life in America. If we in the states suddenly faced a birthrate crisis, what would the U.S. government do?

  Read the article

• Should I listen to my employer and use CASE tools?

  - by omsharp

  My employer (Not a Developer) thinks that CASE tools will help us improve our development process and documentation. I am not sure about that, we are a small team of 5 developers building mobile banking solutions for local clients. I think CASE tools will be a waste of time and money as they need to be purchased and we will need some time before we get used to them and be efficient working with them for modeling and stuff. Code generation is another issue, I really think that the CASE generated code won't be as good as code written by good developers. I think that if we stick with agile princeliness, design patterns, use TDD, and keep our code clean. we should be good. And as far as Analysis and Design, I think simple UML diagrams on whiteboard should do the trick. Documentation is good and important, but should be made as little as possible and we should not focus on Docs and forget the code. This is what i think. Am I correct? or should I listen to my employer and start researching for an appropriate CASE Tool?

  Read the article

• Is Akka a good solution for a concurrent pipeline/workflow problem?

  - by herpylderp

  Disclaimer: I am brand new to Akka and the concept of Actors/Event-Driven Architectures in general. I have to implement a fairly complex problem where users can configure a "concurrent pipeline": Pipeline: consists of 1+ Stages; all Stages execute sequentially Stage: consists of 1+ Tasks; all Tasks execute in parallel Task: essentially a Java Runnable As you can see above, a Task is a Runnable that does some unit of work. Tasks are organized into Stages, which execute their Tasks in parallel. Stages are organized into the Pipeline, which executes its Stages sequentially. Hence if a user specifies the following Pipeline: CrossTheRoadSafelyPipeline Stage 1: Look Left Task 1: Turn your head to the left and look for cars Task 2: Listen for cars Stage 2: Look right Task 1: Turn your head to the right and look for cars Task 2: Listen for cars Then, Stage 1 will execute, and then Stage 2 will execute. However, while each Stage is executing, it's individual Tasks are executing in parallel/at the same time. In reality Pipelines will become very complicated, and with hundreds of Stages, dozens of Tasks per Stage (again, executing at the same time). To implement this Pipeline I can only think of several solutions: ESB/Apache Camel Guava Event Bus Java 5 Concurrency Actors/Akka Camel doesn't seem right because its core competency is integration not synchrony and orchestration across worker threads. Guava is great, but this doesn't really feel like a subscriber/publisher-type of problem. And Java 5 Concurrency (ExecutorService, etc.) just feels too low-level and painful. So I ask: is Akka a strong candidate for this type of problem? If so, how? If not, then why, and what is a good candidate?

  Read the article

• Using R on your Oracle Data Warehouse

  - by jean-pierre.dijcks

  Since it is Predictive Analytics World in our backyard (or are we San Francisco’s backyard…?) I figured it is well worth the time to dust of some old but important news. With big data (should we start calling it “any data analytics” instead?) being the buzz word and analytics the key operative goal, not moving data around is becoming more and more critical to the business users. Why? Because instead of spending time on moving data around into your next analytics server you should be running analytics on those CPUs. You could always do this with Oracle Data Mining within the Oracle Database. But a lot of folks want to leverage R as their main tool. Well, this article describes how you can do this, since 2010… As Casimir Saternos concludes in the article; “There is a growing awareness of the need to effectively analyze astronomical amounts of data, much of which is stored in Oracle databases. Statistics and modeling techniques are used to improve a wide variety of business functions. ODM accessed using the R language increases the value of your data by uncovering additional information. RODM is a powerful tool to enable your organization to make predictions, classify data, and create visualizations that maximize effectiveness and efficiencies.” Happy Analysis!

  Read the article

• bash terminal/console strange overlapping behavior

  - by UpKey

  I am using gnome-terminal in Ubuntu 11.10 and seem to get long lines overlapping in the terminal window. When I copy a long command line and paste it into the terminal, the text gets overlapped to the start of the line and often covers the user prompt. If I resize the terminal window, making it wider the overlapping gets undone and everything looks normal. In previous versions of Ubuntu, if a line was too long it would continue on the next line below. Another problem I have noticed that may be related, is when using the up arrow key to show previously typed commands, sometimes instead of the output command line being replaced by the previous command each time the key is pressed, the lines get partially merged. A portion of the old line remains, and the next command gets joined onto the end. This leftover part of a command is persistent and does not get replaced next time the key is pressed, although the insertion point or blinking cursor is at the end of the latest recalled command, and the leftover has no effect if I press enter. Is this problem a bug or some setting that needs fixing? Where do I look for the cause? keyboard? gnome-terminal? bash? Thank you for any help or suggestions offered

  Read the article

• MySQL documentation writer for MEM and Replication wanted!

  - by stefanhinz

  As MySQL is thriving and growing, we're looking for an experienced technical writer located in the UK or Ireland to join the MySQL documentation team. For this job, we need the best and most dedicated people around. You will be part of a geographically distributed documentation team responsible for the technical documentation of all MySQL products. Team members are expected to work independently, requiring discipline and excellent time-management skills as well as the technical facilities and experience to communicate across the Internet. Candidates should be prepared to work intensively with our engineers and support personnel. The overall team is highly distributed across different geographies and time zones. Our source format is DocBook XML. We're not just writing documentation, but also handling publication. This means you should be familiar with DocBook, and willing to learn our publication infrastructure. Your areas of responsibility would initially be MySQL Enterprise Monitor, and MySQL Replication. This means you should be familiar with MySQL in general, and preferably also with the MySQL Enterprise offerings. A MySQL certification will be considered an advantage. Other qualifications you should have: Native English speaker 5 or more years previous experience in writing software documentation Familiarity with distributed working environments and versioning systems such as SVN Comfortable with working on multiple operating systems, particularly Windows, Mac OS X, and Linux Ability to administer own workstations and test environment Excellent written and oral communication skills Ability to provide (online) samples of your work, e.g. books or articles If you're interested, contact me under [email protected]. For reference, the job offer can be viewed here.

  Read the article

• How do you QA and release software quickly with a large team?

  - by sadadasd

  My work used to be a smaller team. We had less than 13 devs for a while. We are now growing rapidly, and are over 20 with plans to be over 30 in a few months. Our process for QA'ing and releasing each build is no longer working. We currently have everyone develop the new code, and stick it onto a staging environment. A few days before our weekly release, we would freeze the staging environment and QA everything. By our normal release time, everything was usually deemed acceptable and pushed out the door to the main site. We reached a point where our code got too big so we could no longer regress the entire site each week in QA. We were ok with that, we just made a list of everything important and only covered that and the new stuff. Now we are reaching a point where all the new stuff each week is becoming too big and too unstable. Our staging environment is really buggy week after week, and we are usually 1-2 hours behind the normal release time. As the team is growing further, we are going to drown with this same process. We are re-evaluating everything, and I personally am looking for suggestions / success stories. Many companies have been where before and progressed beyond, we need to do the same

  Read the article

• xubuntu 12.04 screen regularly stops refreshing, refreshing resumes after un-/re-maximizing a window

  - by user68477

  My screen frequently stops completely refreshing. I can make it resume refreshing by un-maximizing/re-maximize a window or by switching workspace (the un-/re-maximizing works every time. Switching workspace sometimes has to be done a couple of times). The immediate impression is that the system is frozen: there is apparently no reaction to anything I do but interestingly window title bar will change, if I switch application with (i.e alt+tab or browse through folders) I saw an identical issue in ubuntu 10.04, though a lot less frequent, I never saw this in ubuntu 12.04 (which I have been using the last 4-5 months). After switching to Xubuntu I'm seeing this again and more frequently. The specific reason I'm not sure this is a bug: I installed gnome-control-center which dragged in tons of packages. This was while trying to fix dual-screen setup. I believe the issue surfaced after this. I later meticulously removed every package from this batch (purge) in the hope that every setting would also be removed. But the issue has persisted. Another issue happened at the same time, it may be totally unrelated but it feels as if it is the same basic issue: the screen resolution of the greeter became less than the expected 1680x1050 and often after login there's just a blank and totally unresponsive wallpaper without panel so I have to force reboot. When the login is successful it's very clear that it works hard to determine the correct resolution which is achieved after a few blink to black screens. My questions: 1) Is this a settings issue or a bug? 2) How do I begin to research the issue - could I perhaps some way reset xubuntu/xfce to default. 3) If this is a bug where would be the most appropriate place report this? System: Thinkpad T500 ati radeon HD 3650 $ fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Mobility Radeon HD 3650 OpenGL version string: 3.3.11627 Compatibility Profile Context $ uname -a Linux srvname 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux xfce 4.10 Compiz 0.9.7.8

  Read the article

• F# &ndash; Converting your C# brain to the F# way

  - by MarkPearl

  My brain still thinks in C#!!! I have been looking at F# and trying to figure out the basics of it, but all the time in the back of my mind I am going – what is the C# equivalent to this or that… It’s frustrating because I almost want a F# to C# dictionary the whole time – and simply translate my C# code to F# – which would negate the main motivation for learning F# – as I want learn functional programming - if I was simply doing C# code in a F# syntax I would be gaining nothing! So I am experiencing pain while my brain forms some new neural networks… but luckily I live in a country where we have 11 official spoken languages, and plenty more unofficial languages so I have gone through the pain of learning how to speak a new language before – and I am finding the process is almost identical in learning a programming language that promotes a different way of looking at problems (from Object Orientated to Functional). That beings said… the first thing to learn is the basic syntax… I have searched the web for appropriate places to get a translation – and have been quite disappointed with what is out there for F#. Luckily, OCaml came to the rescue. There are some really good tutorials on getting started with OCaml syntax, one in particular that stood out was the OCamal-Tutorial. What I particularly like about it is that it is doing comparisons between C based languages and OCaml. Give it a read sometime – it’s well worth it and has definitely helped me understand F# a little better.

  Read the article

• Computer suddenly won't boot - stops at a flashing prompt

  - by Dave M G

  I have been running Ubuntu on my computer for a long time, and I have been using 11.10 since it became available in October. Suddenly, this morning, when I rebooted, the computer would not reach the log in screen. I go through the standard POST boot sequence, and I also get a splash screen for my Nvidia graphics card, so at least most of the hardware seems to be working. After that, all I get is a flashing text prompt - one blinking white underline character on a screen that is otherwise completely blank. I don't think it is even reaching GRUB. No key input is possible. I have tried various key combinations to try and initiate some kind of interface, be it command line or anything else. The only key combination that works is [CTRL]+[ALT]+[Delete] to reboot. I realize this is likely to be a hardware problem, but it could be an Ubuntu problem(?), so I'm hoping for a specific set of troubleshooting steps so I can diagnose and repair this issue. My current suspicion is that one of the drives in my 2 disk software RAID has failed (even though they should be too new for that). However, this computer is critical to my work, so I'd like to invite advice on any possibilities so as to waste as little time as possible in fixing this machine.

  Read the article

• Branding/Restricting a Software by License/Serial

  - by Sid

  I have made a POS System for a client of mine using MS Access Server-Client approach. He asked me to brand his software to allow only a certain "number" of users (cashiers) to access the POS System, and must be determined to the license his client will buy. EX: 10 User License = 10 Cashiers ( not necessarily 10 users, it can be 30 users, shifting) = it means 10 PCs will be installed with the client software I made. How and where do I put the logic that will determine if it is licensed or not. What I have done: I have created a serial key generator using Name. Problem is it can be duplicated once you give than name+serial combination, it would still work. I am counting the number of users logged at a time. This could be problematic as I am using MSAccess and not MSSQL. I have scrapped this idea, He also asked me if I could just put serial+mac address combination. That I could do but he will have a hard time implementing it and selling it if he needs the mac address of every computers to be installed with my POS. I am at lost on what can I do. Would like to ask for tips and suggestions. Thank you.

  Read the article

• Twinview broken on upgrade to ubuntu 10.10

  - by mapkyca

  I have been on 9.10 for over a year on the grounds that if it ain't broke, don't fix it. However, I had a spare weekend and figured it was probably about time... I performed an upgrade to 10.4, and everything seemed to proceed smoothly, so I took the plunge and went for 10.10. Disaster. My twinview Nvidia display which had been working perfectly is now broken. On boot everything seems fine, but when X starts and the second monitor springs into life the primary winks out and switches off - almost as if its been put into an unsupported display mode. The system seems to think there's a second monitor - the nvidia logo is split across the two screens, but it can't seem to start. Things I've tried: Swapping the monitors (one is older than the other, and its definitely the port not the actual monitor) Rolling back to an old Xorg conf from prior to the upgrade Installing a non-beta driver direct from Nvidia (this seems to start both monitors but then apparently stops boot and causes the second display to 'wink'. Twinview seems non-functional, both displays are mirrors) Disabling EDID Disabling twinview, logging in and attempting to use the Nvidia config to re-detect the monitors (second monitor is falsely detected and won't go higher than 1024x768. Selecting 'apply' causes one screen to go blank and the other to display garbage) googling for about 5 hours looking for similar problems, none of the offered solutions seemed to work I'm at a loss, and it is looking very much like I'm going to have to go through a time consuming reinstall to downgrade back to the working 10.4. Any thoughts?

  Read the article

• Cannot boot after installing ubuntu on lenovo x120e

  - by tutysara

  I have installed ubuntu 11.10 on my x120e using amd64 alternate iso image. The installation went fine, but it is having issues while booting after a successful installation, it says - "No Operating System Found". I followed the instruction at - help.ubuntu.com/community/X120e#Installation to purge grub-efi and installed grub-pc, even then I couldn't boot into ubuntu.(got the same "No Operating System Found") This is the file from boot-repair with this setup - http://pastebin.ubuntu.com/926556/ Then I asked in #ubuntu and they suggested me to create a bios-boot partition, I was not very comfortable with the solution they had suggested but gave it a try anyhow. I re-sized my initial partition and made 4 MB free space in the beginning of the partition and had set the flag bios_grub. Re-installed ubuntu 11.10 this time using amd64 desktop iso image file. Installation went fine as before but finally this time also the system didn't boot, it gave the same - "No Operating System Found" message. In BIOS I have the settings as to use both (Legacy and UEFI) and with UEFI tried first. This is the boot-repair file from my latest setup - http://pastebin.ubuntu.com/926761 Any help/suggestions are appreciated.

  Read the article

• Why does Android make good coding so difficult?

  - by metacircle

  my daily work is writing tools in C#/WPF. After over more than 1 year on the job now, I came to love MVVM, IoC Containers, XAML (and more). It's pure fun to write code, since simple, maintainable and extendable code just comes naturally when you follow a few basic patterns. In my free time I really want to write some apps, mainly for my own personal use. I want to write apps for fun and not to make money or anything, that being said, paying an annual fee to be allowed to use my own apps on my own device is a total no-go for me. So I am not able to code for Windows Phone and am also not able to use Xamarin on Android (which is sad since Visual Studio + Resharper is programmers heaven). So I am stuck with Android "classic" Java development. Everytime I sit down at home to create an app, or improve some of the code I have already written I get annoyed very quick because getting good, decoupled code is just so hard to accomplish. It feels like everything you have to do in Android to create a good architecture is a workaround instead of being the way things are meant to be. Writing the UI in xml is fine, but everything else is one big code mess. Even all the tutorials do all their coding in the code behind. For 'hello world' this is fine, but for anything bigger this gets messy very very quick. This is where the fun for me ends. It's just no fun anymore because I just spend 90% of my time refactoring and thinking of workarounds how to make my code more maintainable with all the restrictions Android puts on me. Am I missing a crucial part or is this just the way Android is meant to be? Do you have any suggestions how to learn 'the fun way' of Android programming.

  Read the article

• Any examples of fair mmo games with quick completion

  - by Keith Player

  I'm looking for some example games for inspiration that allow from 10 to a large number of players at a time and can be completed in 10 to 30 minutes. I'm looking for something that would have extremely low bandwidth and not be dependent on chance or luck (i.e one player can't gain an unfair advantage because the computer put them in a better position). Realized on the way home that more clarifications might have been helpful. I'm looking to develop a pay-to-play competition that would allow a large number of players to compete in a relatively short period of time. One way would be to have an mmo that can be completed in 30 minutes, another way would be if you could have 10 person games that finish in under 5 minutes and then have the winners compete against each other until a winner is decided. I'm interested in any genre that would make for a fun/interesting game that doesn't depend on luck, so all players should have the same choice/availability of activities/resources and follow the same rules. Some possible games that could possibly be modified into what I want, would be bztanks (too easy to create a bot), diplomacy (takes too long), risk, some chess like game. I was just wondering if there are other game types to the ones I have been considering.

  Read the article

• Drawing visible tiles - side scrolling

  - by Troubleshoot

  Currently I'm calling drawMap every time repaint is called. This is the code I've written for my drawMap method so far. public void drawMap(Graphics2D g2d) { float cameraX = Player.getX() - (Frame.CANVAS_WIDTH / 2); float cameraY = Player.getY() - (Frame.CANVAS_HEIGHT / 2); int tileX = (int) cameraX; int tileY = (int) cameraY; int xIndent = 0, yIndent = 0; int a = 0, b = 0; while (tileX % TILE_SIZE != 0) { tileX--; xIndent++; } while (tileY % TILE_SIZE != 0) { tileY--; yIndent++; } for (int y = tileY; y < tileY + Frame.CANVAS_HEIGHT; y += Map.TILE_SIZE) { for (int x = tileX; x < tileX + Frame.CANVAS_WIDTH; x += Map.TILE_SIZE) { if ((y / TILE_SIZE < 0 || x / TILE_SIZE < 0) || (y / TILE_SIZE > columnSize)) break; g2d.drawImage(map[y / TILE_SIZE][x / TILE_SIZE], a - xIndent, b - yIndent, null); a += TILE_SIZE; } a = 0; b += TILE_SIZE; } } The idea behind this is that it gets the camera position and draws the map relative to the player position. However, instead of the player being in the center of the screen all the time, the player actually moves away from the center as it scrolls to the right, and moves towards to center as it scrolls to the left. I've been trying to pinpoint what I've done wrong but I can't seem to find it. My code also seems quite messy, so am I doing this the correct way?

  Read the article

• Need efficient way to keep enemy from getting hit multiple times by same source

  - by TenFour04

  My game's a simple 2D one, but this probably applies to many types of scenarios. Suppose my player has a sword, or a gun that shoots a projectile that can pass through and hit multiple enemies. While the sword is swinging, there is a duration where I am checking for the sword making contact with any enemy on every frame. But once an enemy is hit by that sword, I don't want him to continue getting hit over and over as the sword follows through. (I do want the sword to continue checking whether it is hitting other enemies.) I've thought of a couple different approaches (below), but they don't seem like good ones to me. I'm looking for a way that doesn't force cross-referencing (I don't want the enemy to have to send a message back to the sword/projectile). And I'd like to avoid generating/resetting multiple array lists with every attack. Each time the sword swings it generates a unique id (maybe by just incrementing a global static long). Every enemy keeps a list of id's of swipes or projectiles that have already hit them, so the enemy knows not to get hurt by something multiple times. Downside is that every enemy may have a big list to compare to. So projectiles and sword swipes would have to broadcast their end-of-life to all enemies and cause a search and remove on every enemy's array list. Seems kind of slow. Each sword swipe or projectile keeps its own list of enemies that it has already hit so it knows not to apply damage. Downsides: Have to generate a new list (probably pull from a pool and clear one) every time a sword is swung or a projectile shot. Also, this breaks down modularity, because now the sword has to send a message to the enemy, and the enemy has to send a message back to the sword. Seems to me that two-way streets like this are a great way to create very difficult-to-find bugs.

  Read the article

• Oracle OpenWorld 2012

  - by Maria Colgan

  I can't believe it's time for OpenWorld again! Oracle OpenWorld is the largest gathering of Oracle customers, partners, developers, and technology enthusiasts. This year it will take place between September 30th and October 4th in San Francisco. Of course, the Optimizer development group will be there and you will have multiple opportunities to meet the team, in one of our technical sessions, or at the Oracle Database demogrounds. This year the Optimizer team has 2 technical sessions, as well as a booth in the Oracle Database demogrounds. Tuesday, October 2nd at 1:15pm Oracle Optimizer: Harnessing the Power of Optimizer Hints Session CON8455 at Moscone South - room 103 In this session we will discuss in detail how optimizer hints are interpreted, when they should be used, and why they sometimes appear to be ignored. Thursday, October 4th at 12:45pm Oracle Optimizer: An Insider’s View of How the Optimizer Works Session CON8457 at Moscone South - room 104This session explains how the latest version of the optimizer works and the best ways you can influence its decisions to ensure you get optimal execution every time. It will also include a full history of the Cost Based Optimizer, so make sure you stick around for this one! If you have burning Optimizer or statistics related questions, or if you just want to pick up an Optimizer bumper sticker, you can stop by the Optimizer demo booth. This year we are located in booth 3157, in the Database area of the demogrounds, in Moscone South. Members of the Optimizer development team will be there Monday through Wednesday from 9:45 am until 6pm. The full Oracle OpenWorld catalog is on-line, or you can browse by speakers by name. So start planning your trip today! +Maria Colgan

  Read the article

• Minimum percentage of free physical memory that Linux require for optimal performance

  - by csoto

  Recently, we have been getting questions about this percentage of free physical memory that OS require for optimal performance, mainly applicable to physical compute nodes. Under normal conditions you may see that at the nodes without any application running the OS take (for example) between 24 and 25 GB of memory. The Linux system reports the free memory in a different way, and most of those 25gbs (of the example) are available for user processes. IE: Mem: 99191652k total, 23785732k used, 75405920k free, 173320k buffers The MOS Doc Id. 233753.1 - "Analyzing Data Provided by '/proc/meminfo'" - explains it (section 4 - "Final Remarks"): Free Memory and Used Memory Estimating the resource usage, especially the memory consumption of processes is by far more complicated than it looks like at a first glance. The philosophy is an unused resource is a wasted resource.The kernel therefore will use as much RAM as it can to cache information from your local and remote filesystems/disks. This builds up over time as reads and writes are done on the system trying to keep the data stored in RAM as relevant as possible to the processes that have been running on your system. If there is free RAM available, more caching will be performed and thus more memory 'consumed'. However this doesn't really count as resource usage, since this cached memory is available in case some other process needs it. The cache is reclaimed, not at the time of process exit (you might start up another process soon that needs the same data), but upon demand. That said, focusing more specifically on the percentage question, apart from this memory that OS takes, how much should be the minimum free memory that must be available every node so that they operate normally? The answer is: As a rule of thumb 80% memory utilization is a good threshold, anything bigger than that should be investigated and remedied.

  Read the article

• Scene transitions

  - by Mars

  It's my first time working with actual scenes/states, aka DrawableGameComponents, which work separate from one another. I'm now wondering what's the best way to make transitions between them, and how to affect them from other scenes. Lets say I wanted to "push" one screen to the right, with another one coming in at the same time. Naturally I'd have to keep drawing both, until the transition is complete. And I'd have to adjust the coordinates I'm drawing at while doing it. Is there a way around specifically handling this special case in every single scene? Or of I wanted to fade one into the other. Basically the question stays the same, how would you do that without having to handle it in every single scene? While writing this I'm realizing it will be the same thing for all kinds of transitions. Maybe a central Draw method in the manager could be a solution, where parameters and effects are applied when necessary. But this wouldn't work if objects that are drawn have their own method, and aren't drawn within the scene, or if an effect has to be applied to the whole scene. That means, maybe scenes have to be drawn to their own rendertarget? That way one call to the base class after the normal drawing could be enough, to apply the effects, while drawing it to the main render target. But I once heard there are problems when switching from target to target, back and forth. So is that even a viable option? As you can see, I have some basic ideas how it might work... but nothing specific. I'd like to learn what's the common way to achieve such things, a general way to apply all kinds of transitions.

  Read the article

• License validation and calling home

  - by VitalyB

  I am developing an application that, when bought, can be activated using a license. Currently I am doing offline validation which is a bit troubling to me. I am aware there is nothing to do against cracks (i.e modified binaries), however, I am thinking to trying to discourage license-key pirating. Here is my current plan: When the user activates the software and after offline validation is successful, it tries to call home and validate the license. If home approves of the license or if home is unreachable, or if the user is offline, the license gets approved. If home is reached and tells the license is invalid, validation fails. Licensed application calls home the same way every time during startup (in background). If license is revoked (i.e pirated license or generated via keygen), the license get deactivated. This should help with piracy of licenses - An invalid license will be disabled and a valid license that was pirated can be revoked (and its legal owner supplied with new license). Pirate-users will be forced to use cracked version which are usually version specific and harder to reach. While it generally sounds good to me, I have some concerns: Users tend to not like home-calling and online validation. Would that kind of validation bother you? Even though in case of offline/failure the application stays licensed? It is clear that the whole scheme can be thwarted by going offline/firewall/etc. I think that the bother to do one of these is great enough to discourage casual license sharing, but I am not sure. As it goes in general with licensing and DRM variations, I am not sure the time I spend on that kind of protection isn't better spent by improving my product. I'd appreciate your input and thoughts. Thanks!

  Read the article

• How to factorize code in Unreal Kismet (i.e. "Material Function"s for Kismet)

  - by Georges Dupéron

  In the Unreal Development Kit, when using the Material Editor, one can factorize frequently-used groups of nodes by creating a Material Function (content Browser ? right-click ? new matrial function, IIRC). When defining the behaviour of some actor in Kismet, one can easily have a dozen nodes involved. If I have many actors that share the same behaviour, then I'll copy-paste these nodes, and change the variables so they point to the other actors. This leads to inconsistencies (a modification in the behaviour of an actor isn't propagated in the copy-pasted nodes), complexity (you end up with hundreds of nodes), and generally useless effort. My question is : Can I create a "kismet function", just like a material function ? Note: I'd rather avoid using UnrealScript. I don't even know where to type UnrealScripts, don't know where the documentation is and more generally don't have enough time to invest in learning UnrealScript. This "kismet function" feature must be usable by graphists (with little programming knowledge). If a (simple) script suffices to add this feature in the Kismet editor, so that one can create several "functions" without using UnrealScript, then fine, but I don't really want to have to write a script each time I want to factorize a few nodes. Thanks for any information !

  Read the article

< Previous Page | 510 511 512 513 514 515 516 517 518 519 520 521  | Next Page >