Search Results

Search found 55281 results on 2212 pages for 'get set'.

Page 516/2212 | < Previous Page | 512 513 514 515 516 517 518 519 520 521 522 523  | Next Page >

• How do I add client computers to a Windows SBS 2008 domain?

  - by Jonas

  We have a LAN and the router is the DHCP server. We have a server with Windows SBS 2008, it has the IP address 192.168.1.2 while the router has the IP address 192.168.1.1. I have set "DNS Relay" on the router to 192.168.1.2. I have tried to add a client computer to the SBS domain by visiting http://connect from the client computer. But that page doesn't exist. I can visit http://192.168.1.2/ then the default startpage for IIS7 is shown. I'm logged in as a local Administrator on the computer that I tries to add to the domain. How do I add the client computer to the SBS 2008 domain? The router is an D-Link DFL 200, and I have now set the "DNS Relay" to "Use address of LAN interface" instead of a specific IP-address. But it doesn't work.

  Read the article

• vi visual mode doesn't work

  - by BobMarley

  I'm running vim (7.0.237) after sshing to a remote CentOS box, and it just won't enter visual mode. When I press 'v', it just beeps and does nothing. I'm running Ubuntu with GNOME Terminal, and the local copy of vi works fine, so I don't see how this could be a problem with the terminal. I have the same .vimrc file on the local and remote machines, and the only settings are: set nocompatible; set tabstop=4. I'm at a total loss here, any ideas?

  Read the article

• Error in New-MailboxExportRequest - "Couldn't find the Enterprise Organizational Container" even though permissions seem right

  - by tacos_tacos_tacos

  When disabling users I typically will be asked to retain a copy of their mailbox. I accomplish this by literally creating their mailbox in Outlook and then exporting to PST. Is there some way around having to do this just to save a mailbox? Edit: I've tried New-MailboxExportRequest but I keep getting the following after providing an alias: Supply values for the following parameters: FilePath: \\localhost\EXPORT_PST\myuser.pst Mailbox: myuser Couldn't find the Enterprise Organization container. <--- the error I've also tried supplying [email protected] as the mailbox as well. Edit 2: I had already seen the post at http://www.mikepfeiffer.net/2010/10/error-couldnt-find-the-enterprise-organization-container-when-creating-a-new-mailbox-export-request/ so I set the permissions as follows below: NTFS permissions Sharing permissions I am still getting that error. Final Solution In Exchange SP2, it does not warn you that you have not set role assignments, it just fails. So be sure to create a management role for "Mailbox Import Export" and add your user to the group, then restart PowerShell for this to take effect.

  Read the article

• How to setup a fast VPN server

  - by Saif Bechan

  I am trying to set up a VPN that has a fast download speed. The server I have is a linux server and from there I can download 2 megabytes a second. At home I can also download with 2 megabytes a second. All the downloads I do are from the same source, no different server. Now I have set up a VPN connection between my home and the server, and now I am only downloading 64 kilobytes a second! The connection I have created is a PPTP server on a debian machine. Now my question is if it is possible to optimize this connection. Should I maybe switch to OpenVPN, or change operating systems? Or are there some kind of settings to tweak to make the connection optimal. PS. The server I am running is on a XEN node. I have done the proper ip forwarding.

  Read the article

• Well....a ghost lives in my server...

  - by tsgiannis

  Hello to every body and greetings from Greece I have a rather unusual situation and i am running out of ideas. I have this old server (IBM x205 - P4 2.4Ghz,3xSCSI 36gb) and i was about a year ago i decided to use it as an additional domain controller,fax & file server...for this task i had a Delock 70154 SATA card along with 2x320 SATA II HDDs Everything was going super smoothly until about 3 weeks ago. I was on a trip and i was informermed when i got back that the server was found frozen...well i considered it was a glitch since a simple powerdown power up fixed everything.Again 2 weeks ago another freeze situation....it got suspicious but again power down power up everything was running.... Last again it frozen and when i power it up it came with a message that the Domain services could not start due to NTDS corruption....booting in safe mode revealed that there was an issue with the SATA Raid (degraded). After a lot of searching i degraded the server...cleaned Active Directory and pulled both HDDs out (one of these was really BAD ) and recovered my files (i had some problems with ho Delock handles the redudant HDD). Right now my server is vanilla simple...with only what the factory installed and here is where the fun begins. Everyday when i arrive at the office i find this particular machine dead..and i mean total dead...just a black screen and nothing else...the cpu fan is working ,the psu is working .keyboard and mouse are dead(they also lock my kvm) ...network is dead.... the machine is DEAD. I power it down forcilly ...i power it up and for the 8 hours i am in the office it works,either idling or running some kind of diagnostic...when i leave the office after some time..it maybe half an hour ...it maybe 4 hours the machine dies...at least this is the information the event log shows (" the previous shutdown at xx:xx:xx was unexpected) Well i must admit i am runnig out of ideas.... I have tried Memtest....nothing Passmark burn in test.....nothing Carefull study of the event log.....nothing Set Instead of restart..BSOD....nothing Power sceheme to sleep...all set to never. i know there are a lot of other tools that heavily stress a machine like occt but .... the machine is old...today i will give them a try nevertheless ..... One idea is to reformat it...but ... i really like to find what is causing this because i could get to a situation that everything is working for a while and kaboom...one day again is dying.. I really need a helping hand and every opinion / idea is well welcomed.... iknow the obvious solution is to never leave the office but....i have a life...sory server...:) P.S this situation with the machine dying some time after is going on for about one week...everyday i would set either the RAID to rebuild....or to copy/recover files and while everythig was working

  Read the article

• Setup dual screen with Catalyst Control Center on notebook so that nothing changes when closing lid (case) ?

  - by Tom

  I have setup a dualscreen setup for my notebook with an ATI video card (ATI mobility radeon hd 5470) using Catalyst Control Center. The monitor extends the desktop of the notebook's screen. This works great. I am running on windows 7 and have set it up to not do anything when I close my laptop's lid (case) other than dim the notebook's display. However, when I do close the lid (notebook's display), the second monitor suddenly changes and I believe it starts behaving as the primary monitor.. I do not want this to happen. So, how do I setup my dualscreen setup so that it won't set the secondary monitor as the primary one when I close my laptop's lid? UPDATE: this video shows exactly what my problem is: http://www.youtube.com/watch?v=Q1ygNHbqI2g

  Read the article

• Change Windows Service Priority

  - by SchlaWiener

  I have a windows service that needs to run with High Priority. At the end of the day I want to use this script to modify the priority after service startup: Const HIGH = 256 strComputer = "." strProcess = "BntCapi2.exe" Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2") Set colProcesses = objWMIService.ExecQuery _ ("Select * from Win32_Process Where Name = '" & strProcess & "'") For Each objProcess in colProcesses objProcess.SetPriority(HIGH) Next But currently I am not able to change the priority, even with the taskmanger. The taskmananger throws an "Access Denied" error, but I am logged on as administrator and I changed the user account of the service to administrator, too. I still get the "access denied" message when trying to change the priority. Any ideas what permission I need to do that?

  Read the article

• Using unsigned drivers in Windows 8

  - by T. Fabre

  I just migrated from Windows 7 x64 to 8, but I can't get my VPN software to run anymore : the SafeNet IKE service (installed by SafeNet SoftRemoteLT GA, used by my VPN provider) cannot start anymore. I found that by default unsigned drivers are disabled on Win8, and that is what is blocking the driver. The System event log tells me that the driver (apparently, C:\WINDOWS\SysWow64\Drivers\IPSECDRV.sys ) was blocked when I try to manually start the service (SafeNet IKE Service). I get the same messages for another driver, crypto.sys found in the same folder. I tried using bcdedit to enable unsigned drivers : bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS bcdedit /set testsigning ON After reboot, same error. I tried by booting into Win 8's test mode, same issue. Applying the code signing policy (Enabled, Ignore) does not help either. Running gpresult does show that the policy is applied. Any help welcome.

  Read the article

• Setting the Server Port in D-Link Router for eMailing Logs

  - by Synetech

  Does anyone know how to set the port for the email server in the Status->Log section of the D-Link DI-524? I’ve tried the setting below but it does not seem to work. I don’t want to use the default port 25 if I can avoid it. (No, the server and email address in the snap are irrelevant, you can replace the server with hotmail.com or whatever and address with a valid one; the question I am trying to figure out is how to set the port.)

  Read the article

• Printer Properties not sending the correct page size to program

  - by Jeff

  We have a Zebra 2844 Label Printer with 4"x3" labels in it. When we check the page settings in Windows XP, it is set to the correct size. When we go to print out of any program, it prints 4"x11". I have checked the page settings in one of the programs that we are using and it does show correctly the 4"x3" settings but prints at the incorrect 4"x11". I have followed the steps here Paper size: Printer Properties vs Page Setup and here Is there a way to programatically set the printer properties in windows? but have not been able to glean enough information to figure it out. If anyone can help, I would appreciate it!

  Read the article

• nginx conditional Accept header

  - by manu_v

  Some mobile devices send the following incorrect requests to our servers : GET / HTTP/1.0 Accept: User-Agent : xxx The empty Accept header causes our Ruby on Rails server to throw back a 500 error. In Apache, the following directive allows us to rewrite the header before sending it to the application RoR server in order to cope with the broken devices : RequestHeader edit Accept ^$ "*/*" early We're currently setting up nginx, but achieving the same work-around is proving difficult. We are able to set : proxy_set_header Accept */*; However, this seems to have to be done inconditionally. Whenever trying to do : if ($http_accept !~ ".") { proxy_set_header Accept */*; } It complains with the message : "proxy_set_header" directive is not allowed here So, using nginx, how can we set the HTTP Accept header to */* when it is empty before sending the request to the application server ?

  Read the article

• Canon HV20 recognized, but no drivers in Windows 7 x64

  - by Tuminoid

  My Canon HV20 camcorder is properly recognized when connected via Firewire to Windows 7 x64, but no drivers are installed for it. Windows or I cannot locate any drivers for it as, but it should be working off-the-shelf. I googled a lot, and found instructions to set IEEE 1394 host to legacy mode via Device Manager, but Windows doesn't offer me the legacy option at all. If I check the properties of Canon&HV20 device in Other devices section it says The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. It used to work just fine on my previous installation of Vista x64 and same hardware :/

  Read the article

• OpenVPN (HideMyAss) client on Ubuntu: Route only HTTP traffic

  - by Andersmith

  I want to use HideMyAss VPN (hidemyass.com) on Ubuntu Linux to route only HTTP (ports 80 & 443) traffic to the HideMyAss VPN server, and leave all the other traffic (MySQL, SSH, etc.) alone. I'm running Ubuntu on AWS EC2 instances. The problem is that when I try and run the default HMA script, I suddenly can't SSH into the Ubuntu instance anymore and have to reboot it from the AWS console. I suspect the Ubuntu instance will also have trouble connecting to the RDS MySQL database, but haven't confirmed it. HMA uses OpenVPN like this: sudo openvpn client.cfg The client configuration file (client.cfg) looks like this: ############################################## # Sample client-side OpenVPN 2.0 config file # # for connecting to multi-client server. # # # # This configuration can be used by multiple # # clients, however each client should have # # its own cert and key files. # # # # On Windows, you might want to rename this # # file so it has a .ovpn extension # ############################################## # Specify that we are a client and that we # will be pulling certain config file directives # from the server. client auth-user-pass #management-query-passwords #management-hold # Disable management port for debugging port issues #management 127.0.0.1 13010 ping 5 ping-exit 30 # Use the same setting as you are using on # the server. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. #;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel # if you have more than one. On XP SP2, # you may need to disable the firewall # for the TAP adapter. ;dev-node MyTap # Are we connecting to a TCP or # UDP server? Use the same setting as # on the server. proto tcp ;proto udp # The hostname/IP and port of the server. # You can have multiple remote entries # to load balance between the servers. # All VPN Servers are added at the very end ;remote my-server-2 1194 # Choose a random host from the remote # list for load-balancing. Otherwise # try hosts in the order specified. # We order the hosts according to number of connections. # So no need to randomize the list # remote-random # Keep trying indefinitely to resolve the # host name of the OpenVPN server. Very useful # on machines which are not permanently connected # to the internet such as laptops. resolv-retry infinite # Most clients don't need to bind to # a specific local port number. nobind # Downgrade privileges after initialization (non-Windows only) ;user nobody ;group nobody # Try to preserve some state across restarts. persist-key persist-tun # If you are connecting through an # HTTP proxy to reach the actual OpenVPN # server, put the proxy server/IP and # port number here. See the man page # if your proxy server requires # authentication. ;http-proxy-retry # retry on connection failures ;http-proxy [proxy server] [proxy port #] # Wireless networks often produce a lot # of duplicate packets. Set this flag # to silence duplicate packet warnings. ;mute-replay-warnings # SSL/TLS parms. # See the server config file for more # description. It's best to use # a separate .crt/.key file pair # for each client. A single ca # file can be used for all clients. ca ./keys/ca.crt cert ./keys/hmauser.crt key ./keys/hmauser.key # Verify server certificate by checking # that the certicate has the nsCertType # field set to "server". This is an # important precaution to protect against # a potential attack discussed here: # http://openvpn.net/howto.html#mitm # # To use this feature, you will need to generate # your server certificates with the nsCertType # field set to "server". The build-key-server # script in the easy-rsa folder will do this. ;ns-cert-type server # If a tls-auth key is used on the server # then every client must also have the key. ;tls-auth ta.key 1 # Select a cryptographic cipher. # If the cipher option is used on the server # then you must also specify it here. ;cipher x # Enable compression on the VPN link. # Don't enable this unless it is also # enabled in the server config file. #comp-lzo # Set log file verbosity. verb 3 # Silence repeating messages ;mute 20 # Detect proxy auto matically #auto-proxy # Need this for Vista connection issue route-metric 1 # Get rid of the cached password warning #auth-nocache #show-net-up #dhcp-renew #dhcp-release #route-delay 0 120 # added to prevent MITM attack ns-cert-type server # # Remote servers added dynamically by the master server # DO NOT CHANGE below this line # remote-random remote 173.242.116.200 443 # 0 remote 38.121.77.74 443 # 0 # etc... remote 67.23.177.5 443 # 0 remote 46.19.136.130 443 # 0 remote 173.254.207.2 443 # 0 # END

  Read the article

• virsh console and tty size

  - by pehrs

  I have a virtualization server to which I connect over ssh. If I now change the size of the window it will automatically propagate to the server. It's most easily seen using stty -a, checking the columns and row values. I then use virsh console to connect to the serial interface on a KVM based virtual machine. When I now change the size of the window it does not propagate to the virtual server. This is most easily seen by checking stty -a, which is not updated on the virtual machine when I change window size. This means that line breaks does not work correctly in the terminal and any application that relies on window size for formatting (emacs, man, etc) gets messed up unless the window size on the client matches the default size on the server. A workaround is to manually set the window size to match the client window using stty, but I wonder if there is any way to get this information to propagate and set the window size in the virtual machine automatically.

  Read the article

• How to determine the source for wakeup in hibernate

  - by Erik

  I have a big problem with my home theater PC that runs Windows 7 64Bit. Normally, I send that PC to hibernate every evening, but from time to time, it keeps waking up for no obvious reason, and stays on until I realize, which is sometimes half a day later :( I have already checked for Windows update, which is not set to automatical, since I prefer installing updates manually. When I look in the system event log, there is an entry called "Power Troubleshooter" which tells me that my system was reactivated at a specific time, but it also says: Source = Unknown, which is the most annoying part. So how can I actually figure out, which process reactivates the PC? Is it possible to set a group policy which forbidds applications or services from scheduling tasks that allow waking up from hibernate at all?

  Read the article

• Setting up a DNS port redirect?

  - by Svetlana

  I have a domain using CloudFlare's DNS, I want to make it redirect to my server's IP (dynamic IP, port 21 blocked by ISP) which at the moment uses a No-IP DNS. The current setup is that I have a subdomain as a CNAME targetting the No-IP domain, but that only works for things like the Minecraft server (which looks for a set port that isn't blocked by my ISP), and I'd like a solution that lets me redirect port 21 from the CloudFlare domain to port 2121 on the No-IP domain, or something else that points to my dynamic IP, where an FTP server is already set up and running. I've had SRV records mentioned to me but without any further help, and it only made me more confused. Thanks in advance for the help.

  Read the article

• Exchange 2010 sending old Out of Office message

  - by Tatas

  We are just about done with our migration from Exchange 2003 to 2010. I have a user who has been migrated to the new system that is now out on medical leave. He has gone into OWA and set up his Out of Office notification. The good news is that an Out of Office message is sent, the bad news is that it appears to be sending an old outdated message from back when the user was on Exchange 2003, and not honoring the new message set up in OWA. The user has also tried setting this up in Outlook 2010 as well with the same behavior. I have a feeling that this is related to the old public folders (didn't they contain OOF messages?) still lingering around our Exchange org. Any ideas?

  Read the article

• Create room mailbox in Exchange 2007 - cannot view calendar

  - by David Neale

  I'm an application developer and I'm trying to play around with Exchange in order to integrate a room booking system with it. I've created a room mailbox and have set it so that it auto-accepts appointment requests. When creating an appointment as a standard user I can add the room as a resource and its availability will display. However, I can add it as a shared calendar to Outlook 2003 (Unable to display the folder. The Calendar folder could not be found) nor can I return the calendar folder using Exchange Web Services (again, could not find the folder). I've also created an appointment via Exchange Web Services with a room as a resource. The resource was successfully booked (as confirmed when opening it as the room's delegate) but it does not appear on the meeting as viewed by any of the attendees. Is there anything further I need to do in order to share this calendar? How do most organisations set up their Exchange with regards to rooms?

  Read the article

• Enable/disable wireless interface in a bat file

  - by Herms

  Is there a way to enable/disable a wireless network interface via the command line (so I can put it in a bat file)? When I'm in the office I use a wired connection, but Windows still occasionally bugs me about my wireless connection not being connected (even though I turned off the option for notifying me when there's no connectivity). I'm guessing the only way to stop it from bugging me is to disable the interface, but I'd rather not have to go into the network settings every time I need to do so. I'd like to set up a bat file or a shortcut that I can use to enable/disable the wireless (preferably a single one that toggles the current state), and then just set up a keyboard shortcut for that. I just have no idea how to do so from the command line.

  Read the article

• Does NTFS performance degrade significantly in volumes larger than five or six TB?

  - by Josh Yeager

  One of my customers is planning to set up a new document store, which will probably grow by 1-2TB per year. One of my co-workers says that Windows performance is extremely bad if it has a single NTFS volume that is bigger than five or six TB. He thinks that we need to set up their system with multiple volumes so that no single volume will exceed that limit. Is this a real problem? Does Windows or NTFS slow down when the volume size reaches several terabytes? Or is it possible to create a single volume of 10 or more TB?

  Read the article

• I can only see the first website alphabetically

  - by Victor

  I have 3 subdomains websites. Those are subdomain1.mydomain.com, subdomain2.mydomain.com, subdomain3.mydomain.com. I have point these to the external IP address. bind is ok, dig is onerror, Apache2 reload ok 1.) If I set the following, I can only see the first one alphabetically. NameVirtualHost *:80 <VirtualHost *:80> ServerName subdomain1.mydomain.com ... <VirtualHost *:80> ServerName subdomain2.mydomain.com ... 2.) If I set the following, I get file not found. Apache2 reload ok. NameVirtualHost mydomain.com:80 <VirtualHost mydomain.com:80> ServerName subdomain1.mydomain.com ... <VirtualHost mydomain.com:80> ServerName subdomain2.mydomain.com Please Help! What else should I do.

  Read the article

• Multiple EyeFinity Display groups

  - by Shinrai

  Is it possible with an EyeFinity enabled card to make multiple display groups at once? I was playing with a FirePro 2460 and while a 4x1 or 2x2 display group works quite nicely, if I make a 2x1 display group and then select one of the other displays to try to make a second 2x1 display group, it disables the first one. Is there any way to circumvent this behavior and set up two separate spans on the same card? Additionally, can you set up distinct display groups if they're on different cards? I will have the opportunity to test several of these cards in one machine very shortly, but I'm curious if anyone has any experience. EDIT: I can confirm that you can make multiple spans on multiple cards (as long as they don't cross cards, obviously) (If the answers are different for FirePro/FireMV cards and Radeon cards, that is helpful and relevant knowledge - I doubt it, though.)

  Read the article

• How to remove RAID flag on unstriped drive without losing data?

  - by Alex Folland

  I have a Gigabyte Z68X-UD4-B3 motherboard. It advertises this new thing called "XHD", which is like RAID but makes a SSD and traditional-style drive work together to enable high speed with high capacity. I don't want to use this feature, and I already have Windows 7 64 installed without using this feature. When I first installed my 2 hard drives (1 SSD and 1 traditional-style drive) in my machine and booted it up for the first time, it ran a program from the mobo that asked me if I wanted to set up XHD. Thinking it would go to some config screen, I said yes. It immediately started doing something with my drives and finished. I considered that strange, but figured it wouldn't matter when I simply install Windows onto my SSD only. I now have my BIOS and Windows running in AHCI mode with no RAID arrays and separate drives. My SSD is one of those new Corsair Force GT drives which loses power every so often, causing Windows to BSOD. I've figured everything out about this problem, including installing the latest firmware from Corsair, and the only way to fix it at this point is by installing Intel Rapid Storage Technology to control AHCI instead of Windows, since the Windows AHCI driver disables the drive's power every once in a while and can't be configured not to do so. I've tried installing Intel Rapid Storage Technology. When I reboot my machine after doing so, it BSODs just after the Windows logo. I've figured out this is because my SSD and my traditional drive are flagged as RAID, as seen in the "Intel Matrix Storage Manager" program found by switching the BIOS hard drive handling to "RAID" mode. This is due to the XHD auto-config program I mentioned earlier. Normally, the BIOS is set to AHCI, and when the drives boot in AHCI mode, they work perfectly. So, I've concluded the data is stored in AHCI mode but the drives' flags are set to RAID. I've figured out that I can accomplish my objective by using the "Intel Matrix Storage Manager" program on the mobo (with "Reset disks to non-RAID"), but doing so would cause it to completely wipe the drives I select. I want to simply toggle these flags from RAID to AHCI so Intel Rapid Storage Technology doesn't fail and cause a BSOD upon booting, but without wiping the drives.

  Read the article

• How to limit my CPU power programmatically on Windows 7?

  - by Ivan

  Whenever I run a CPU-heavy activity (like compressing a big set of files into an archive for example) my CPU switches to its full throttle (maximum frequency) and shuts down of overheat in less than a minute. Instead, I would like it to keep slowed-down slightly to do the task a bit slower but be able to reach the finish. At the same time I don't want to dim my screen brightness or adjust anything else what standard Windows power-saving system does. So how do I actually set a cap to limit my CPU power? The CPU is Core 2 Duo T7250, the OS is Windows 7 32-bit, there seem to be no BIOS settings or jumpers available to configure the frequencies.

  Read the article

• osx 10.6 dhcp client-id option

  - by Clustermagnet

  Trying to join a osx machine on a dhcp network which forces certain client IDs. Even if I was to modify the client-id via the network properties, the DHCP server is not accepting this request, since Windows and Apple send this via different options You can set the ClassID in the Network Control Panel in the DHCP Client ID box. The trick lies in setting up your DHCP server to recognize it. Windows XP sends the DHCP class ID via DHCP option 77, and OS X sends it via option 61. You'll have to set your DHCP server to check for option 61, +with an offset of 1 and a length of 9+. That's the tricky bit. So, without modifying the DHCP server... (which does not belong to me), is there anything that can be done on OSX to modify the client-id option to be 77?

  Read the article

< Previous Page | 512 513 514 515 516 517 518 519 520 521 522 523  | Next Page >