Search Results

Search found 18729 results on 750 pages for 'edit'.

Page 519/750 | < Previous Page | 515 516 517 518 519 520 521 522 523 524 525 526  | Next Page >

• Subversion Edge LDAP (require CAC Certificate not Username and Password)

  - by Frank Hale

  What I've Done: I've successfully installed and configured Subversion Edge 3.1.2 with LDAP support on a Windows 2008 server. I have configured LDAP users and am able to use LDAP credentials to work on repositories just fine. No issues whatsoever. Works great! What I Want To Do: I've been searching for several hours now in hopes to find some information on how to configure Subversion Edge server to require client certificates for user authentication against an LDAP environment. I have not found anything yet that gives me an indication of how to do it. I know there are SVN clients that are capable of prompting for CAC certificates but I cannot figure out how to set my server up to require it. NOTE: CAC authentication is already setup and working in the windows environment. Desired Outcome: When running svn commands that require authentication against my Subversion Edge Server I want it to prompt me for my CAC certificate instead of my Active Directory username and password. If anyone has any information on this I'd greatly appreciate it. EDIT: I'm still digging so if I find out anything I'll update this question with what I found.

  Read the article

• Transpose matrix-style table to 3 columns in Excel

  - by polarbear2k

  I have a matrix-style table in excel where B1:Z1 are column headings and A2:A99 are row headings. I would like to convert this table to a 3 column table (column heading, row heading, cell value). It does not matter in what order the new table is. A B C D A B C A B C 1 H1 H2 H3 1 H1 R1 V1 1 H1 R1 V1 2 R1 V1 V2 V3 => 2 H1 R2 V4 or 2 H2 R1 V2 3 R2 V4 V5 V6 3 H1 R3 V7 3 H3 R1 V3 4 R3 V7 V8 V9 4 H2 R1 V2 4 H1 R2 V4 5 H2 R2 V5 5 H2 R2 V5 6 H2 R3 V8 6 H3 R2 V6 7 H3 R1 V3 7 H1 R3 V7 8 H3 R2 V6 8 H2 R3 V8 9 H3 R3 V9 9 H3 R3 V8 I've been playing around with the OFFSET function to create the whole table but I feel like a combination of TRANSPOSE and V/HLOOKUP is required. Thanks EDIT I have managed to come up with the correct formulas. If the data is in Sheet1 like in my example above, the formulas go in Sheet2: [A1] =IF(ROW() <= COUNTA(Sheet1!$B$1:$Z$1)*COUNTA(Sheet1!$A$2:$A$99), OFFSET(Sheet1!$A$1,0,IF(MOD(ROW(),COUNTA(Sheet1!$B$1:$Z$1))=0,COUNTA(Sheet1!$B$1:$Z$1),MOD(ROW(),COUNTA(Sheet1!$B$1:$Z$1)))),"") [B1] =IF(ROW() <= COUNTA(Sheet1!$B$1:$Z$1)*COUNTA(Sheet1!$A$2:$A$99),OFFSET(Sheet1!$A$1,IF(MOD(ROW(),COUNTA(Sheet1!$A$2:$A$99))=0,COUNTA(Sheet1!$A$2:$A$99),MOD(ROW(),COUNTA(Sheet1!$A$2:$A$99))),0),"") [C1] =IF(ROW() <= COUNTA(Sheet1!$B$1:$Z$1)*COUNTA(Sheet1!$A$2:$A$99),OFFSET(Sheet1!$A$1,IF(MOD(ROW(),COUNTA(Sheet1!$A$2:$A$99))=0,COUNTA(Sheet1!$A$2:$A$99),MOD(ROW(),COUNTA(Sheet1!$A$2:$A$99))),IF(MOD(ROW(),COUNTA(Sheet1!$B$1:$Z$1))=0,COUNTA(Sheet1!$B$1:$Z$1),MOD(ROW(),COUNTA(Sheet1!$B$1:$Z$1)))),"") The formulas are limited to B1:Z1 for the headings and A2:A99 for the rows (these can be increased to their maximums if required). The COUNTA() formula returns the number of cells that actually have values, which limits the number of rows returned to headings*rows. Otherwise the formulas would could go on for infinity because of the MOD function.

  Read the article

• Outlook, Word, and normal.dot (2003 Edition)

  - by mosiac

  I have one user that for some reason has been having macro issues with her normal.dot file. At first the fix was just remove the file because she isn't actually needing to save anything. This was really a temp fix. We found out that for some reason every time she opened up word it was trying to modify normal.dot but not asking. I set it up to ask so at least we could control the changes going on to normal.dot. There was one file disabled in Word that we enabled because it was a document she never used anymore, making us think that maybe that was the issue. We have automatic antivirus updates and scans so there is little chance of a virus. The issue has stopped as far as just using Word itself. She can open, close, edit, save, etc and never get the dialog. In Outlook however if she clicks reply or forward to an e-mail but decides not to send it, and just close it. She gets the pop up to save changes to normal.dot. This leads me to believe something in outlook about how she is setup to use Word as an e-mail editor is causing the problem. Am I even on the right track here? Short form: Word works fine with normal.dot, as an Outlook mail editor wants to change normal.dot. No idea what to do.

  Read the article

• How to create btrfs RAID-1 filesystem (assertion error in mkfs.btrfs)?

  - by amcnabb

  I tried to make a btrfs RAID-1 filesystem in "degraded mode" by following the btrfs UseCases instructions but hit a fatal assertion error. Why is this failing, and is there any workaround? The instructions I followed are at: https://btrfs.wiki.kernel.org/articles/u/s/e/UseCases_8bd8.html The output of the mkfs.btrfs and btrfs filesystem show commands is: # mkfs.btrfs -m raid1 -d raid1 /dev/sdd1 /dev/loop1 WARNING! - Btrfs Btrfs v0.19 IS EXPERIMENTAL WARNING! - see http://btrfs.wiki.kernel.org before using failed to read /dev/sr0 adding device /dev/loop1 id 2 mkfs.btrfs: volumes.c:802: btrfs_alloc_chunk: Assertion `!(ret)' failed. zsh: abort (core dumped) mkfs.btrfs -m raid1 -d raid1 /dev/sdd1 /dev/loop1 # btrfs filesystem show failed to read /dev/sr0 Label: none uuid: 773908b8-acca-4c30-85c5-6642b06de22b Total devices 1 FS bytes used 28.00KB devid 1 size 223.13GB used 2.04GB path /dev/sda5 Label: none uuid: 0f06f1a8-5f5f-4b92-a55c-b827bcbcc840 Total devices 2 FS bytes used 24.00KB devid 2 size 2.00GB used 0.00 path /dev/loop1 devid 1 size 1.36TB used 20.00MB path /dev/sdd1 Btrfs Btrfs v0.19 # EDIT: It turns out that the filesystem isn't mountable: # mount /dev/sdd1 /mnt/big2 mount: wrong fs type, bad option, bad superblock on /dev/sdd1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # So, why did the mkfs fail, and is there any workaround?

  Read the article

• Apache2 - Hosting two sites on the same domain with different ports

  - by user1026361

  I am hosting a staging site (test.mydomain.com) which currently work well on port 80 for two sites (test.mydomain.com and test.FRmydomain.com) I am working on a new backend and I would like to deploy a third site on this server for testing. My hope is that it will live at test.mydomain.com:4204. I've got some experience with apache and quickly added statements: Listen 4204 NameVirtualHost *:4204 and created a new config for my site. What I imagine are the relevant parts of my config: <VirtualHost *:4204 > ServerAdmin [email protected] ServerName test.mydomain.com:4204 However, the site is not publicly available, by name or ip. If i curl localhost:4204 from the server, I get the expected page content At this point, I'm a bit of a loss on how to go forwards. It seems like my config is correct but not available to be served. Am I better off defining a proxy definition so that, for instance: test.mydomain.com/4204 proxies to my localhost server or is there a way to make the site available via the internet? EDIT: I have added an iptable rule after further Googling with the command: iptables -I INPUT -p tcp --dport 4204 -j ACCEPT I can see apache listening on 4204 and the rule is definitely in place but cant reach the site

  Read the article

• TFS 2012: Backup Plan Fails with empty log file

  - by Vitor

  I have a Team Foundation Server 2012 installation with Power Tools, and I defined a backup plan using the wizard found in the "Database Backup Tools" in the Team Foundation Server Administration Console. I set the backup plan to do a full database backup on Sunday mornings, to another server in the network. I followed the wizard with no problems and the Backup Plan was set successfully. However when the backup runs it returns Error as result and when I go to the log file I only get the header and no further info: [Info @01:00:01.078] ==================================================================== [Info @01:00:01.078] Team Foundation Server Administration Log [Info @01:00:01.078] Version : 11.0.50727.1 [Info @01:00:01.078] DateTime : 11/25/2012 02:00:01 [Info @01:00:01.078] Type : Full Backup Activity [Info @01:00:01.078] User : <backup user> [Info @01:00:01.078] Machine : <TFS Server> [Info @01:00:01.078] System : Microsoft Windows NT 6.2.9200.0 (AMD64) [Info @01:00:01.078] ==================================================================== I can imagine it's a permission problem, but I have no idea where to start ... Can anyone help? Thank you for your time! EDIT I'm not sure if it is related, but I logged in with "backup user" in "TFS Server" and there was this crash window opened with "TFS Power Tool Shell Extension (TfsComProviderSvr) has stopped working". The full crash log is here: Problem signature: Problem Event Name: APPCRASH Application Name: TfsComProviderSvr.exe Application Version: 11.0.50727.0 Application Timestamp: 5050cd2a Fault Module Name: StackHash_e8da Fault Module Version: 6.2.9200.16420 Fault Module Timestamp: 505aaa82 Exception Code: c0000374 Exception Offset: PCH_72_FROM_ntdll+0x00040DA8 OS Version: 6.2.9200.2.0.0.272.7 Locale ID: 1043 Additional Information 1: e8da Additional Information 2: e8dac447e1089515a72386afa6746972 Additional Information 3: d903 Additional Information 4: d9036f986c69f4492a70e4cf004fb44d Does it help? Thanks everyone!

  Read the article

• How can Standard User change file associations in Windows 2000?

  - by Gary M. Mugford

  One of my clients is still running Win2K server with a host of Win2K workstations. And no net admin, due to the downturn of the economy over the years. I'm sort of helping out. Out of my depth, but I am a loyal foot soldier. A problem I encounter rather too often is a user double-clicks on a file in Explorer and then either gets no action, or the wrong program to run. It's a case of a missing or out-of-date file association. The current cure is to temporarily upgrade the user from Standard to Power, do the FA switch and then change back. As Winnie would whine, 'Oh, bother!' At any rate, I thought I'd ask here. Is there a method/program to run without the rigamarole FROM the Standard Users account on the workstation to edit/add a file association? I assume the program route would involve RunAs. I 'believe' most of the workstations run the RunAs service, but I could be wrong. I understand that's required, if there is to be a solution. Any help accepted with thanks. GM NOTE: Seems wassociate from http://www.xs4all.nl/~wstudios/Associate/index.html can resolve the issue.

  Read the article

• How can Standard User change file associations in Windows 2000?

  - by Gary M. Mugford

  One of my clients is still running Win2K server with a host of Win2K workstations. And no net admin, due to the downturn of the economy over the years. I'm sort of helping out. Out of my depth, but I am a loyal foot soldier. A problem I encounter rather too often is a user double-clicks on a file in Explorer and then either gets no action, or the wrong program to run. It's a case of a missing or out-of-date file association. The current cure is to temporarily upgrade the user from Standard to Power, do the FA switch and then change back. As Winnie would whine, 'Oh, bother!' At any rate, I thought I'd ask here. Is there a method/program to run without the rigamarole FROM the Standard Users account on the workstation to edit/add a file association? I assume the program route would involve RunAs. I 'believe' most of the workstations run the RunAs service, but I could be wrong. I understand that's required, if there is to be a solution. Any help accepted with thanks. GM NOTE: Seems wassociate from http://www.xs4all.nl/~wstudios/Associate/index.html can resolve the issue.

  Read the article

• Transfering call asterisk to different context

  - by Necronet

  I have a Small and basic PBX, and with two contexts wich basicly are sales and supervisor both have different roles and privileges. I notice that it is possible to transfer call from the same context but it have been imposible to transfer anything to another context. Any insight, i am kinda a rookie on asterisk but currently there is no one else in charge... Thanks Edit This is the extension.conf [supervisor] include => from-internal exten => _40XX,1,Answer exten => _40XX,n,Set(calltime=${STRFTIME(${EPOCH},,%C%y%m%d.%H.%M.%S)}) exten => _40XX,n,Set(CALLEDNUMBER=${EXTEN}) exten => _40XX,n,MixMonitor(/tmp/Para_${CALLEDNUMBER}-${calltime}-De_${CALLERID(num)}.wav) exten => _40XX,n,Dial(SIP/${EXTEN},40,TtRr) exten => _40XX,n,Hangup [sales] include => out-trunksip exten => _41XX,1,Answer exten => _41XX,n,Set(calltime=${STRFTIME(${EPOCH},,%C%y%m%d.%H.%M.%S)}) exten => _41XX,n,Set(CALLEDNUMBER=${EXTEN}) exten => _41XX,n,MixMonitor(/tmp/Para_${CALLEDNUMBER}-${calltime}-De_${CALLERID(num)}.wav) exten => _41XX,n,Dial(SIP/${EXTEN},40,TtRr) exten => _41XX,n,Hangup and the sip.conf looks like this: [supervisor] username=sales secret=ASUPERSECRETPASSWORD type=peer ..... context=supervisor mailbox=supervisor [sales] username=sales secret=ASUPERSECRETPASSWORD type=peer ..... context=sales mailbox=sales What do you suggest in order to get the supervisor with the same privileges that he already has and the sales been able to transfer calls to him

  Read the article

• Git clone/push/pull - where's that username comes from?

  - by Kuroki Kaze

  I've set up gitosis and able to pull/push through ssh. Gitosis is installed on Debian Lenny server, I'm using git from windows machine (msysgit). The strange thing, if I enable loglevel = DEBUG in gitosis.conf, I see something like this when doing any actions with gitosis server: D:\Kaze\source\test-project>git pull origin master DEBUG:gitosis.serve.main:Got command "git-upload-pack 'test_project.git'" DEBUG:gitosis.access.haveAccess:Access check for '[email protected]' as 'writable' on 'test_project.git'... DEBUG:gitosis.access.haveAccess:Stripping .git suffix from 'test_project.git', new value 'test_project' DEBUG:gitosis.group.getMembership:found '[email protected]' in 'test' DEBUG:gitosis.access.haveAccess:Access ok for '[email protected]' as 'writable' on 'test_project' DEBUG:gitosis.access.haveAccess:Using prefix 'repositories' for 'test_project' DEBUG:gitosis.serve.main:Serving git-upload-pack 'repositories/test_project.git' From 192.168.175.128:test_project * branch master -> FETCH_HEAD Already up-to-date. Question is: why am I *[email protected]? This email is in global user.email config variable, too. Yesterday, when the gitosis was installed, it seen me as kaze@KAZE, this is the name under which I was added to gitosis-admin group (and it worked). But today git (or gitosis) started to see me as [email protected]. This is true for all repositories I push or clone. I had to add this address to gitosis.conf directly on server to be able to edit configs again (it worked). There is 2 public keys in keydir: [email protected] and [email protected], their content is identical and they have kaze@KAZE at end. Origin URL looks like git@lennyserver:test_project. Now, the question is - why Git (or gitosis) suddenly decided to call me by email instead of name@machinename? I've changed a couple things trying to set up Gitosis (updated git on server to 1.6.0 for example), but maybe I broke something in my local git installation?

  Read the article

• Gnome 3 gdm fails to start after preupgrade from fedora 14 to 15

  - by digital illusion

  I'm not able to boot fedora 15 in runlevel 5. After all services start, when the login screen should appear, gdm just show a mouse waiting cursor and keeps restarting itself. From /var/log/gdm/\:0-greeter.log Gtk-Message: Failed to load module "pk-gtk-module" /usr/bin/gnome-session: symbol lookup error: /usr/lib/gtk-3.0/modules/libatk-bridge.so: undefined symbol: atk_plug_get_type /usr/libexec/gnome-setting-daemon: symbol lookup error: /usr/lib/gtk-3.0modules/libatk-bridge.so: undefined symbol: atk_plug_get_type Where should atk_plug_get_type be defined? Edit: Here a better description of the error (system-config-network-gui:2643): Gnome-WARNING **: Accessibility: failed to find module 'libgail-gnome' which is needed to make this application accessible /usr/bin/python: symbol lookup error: /usr/lib/gtk-2.0/modules/libatk-bridge.so: undefined symbol: atk_plug_get_type Why there are still references to gtk2? Did preupgrade fail? Attaching upgrade log... it seems gdm was not added, but it is present in the users and groups list. May 26 11:25:52 sysimage sendmail[1076]: alias database /etc/aliases rebuilt by root May 26 11:25:52 sysimage sendmail[1076]: /etc/aliases: 77 aliases, longest 23 bytes, 795 bytes total May 26 11:46:09 sysimage useradd[1793]: failed adding user 'dbus', data deleted May 26 11:53:37 sysimage systemd-machine-id-setup[2443]: Initializing machine ID from D-Bus machine ID. May 26 11:55:28 sysimage useradd[2835]: failed adding user 'apache', data deleted May 26 11:55:38 sysimage useradd[2842]: failed adding user 'haldaemon', data deleted May 26 11:55:43 sysimage useradd[2848]: failed adding user 'smolt', data deleted May 26 11:57:32 sysimage sendmail[3032]: alias database /etc/aliases rebuilt by root May 26 11:57:32 sysimage sendmail[3032]: /etc/aliases: 77 aliases, longest 23 bytes, 795 bytes total May 26 11:57:46 sysimage groupadd[3066]: group added to /etc/group: name=cgred, GID=482 May 26 11:57:47 sysimage groupadd[3066]: group added to /etc/gshadow: name=cgred May 26 11:57:47 sysimage groupadd[3066]: new group: name=cgred, GID=482 May 26 11:58:42 sysimage useradd[3086]: failed adding user 'ntp', data deleted May 26 12:00:13 sysimage dbus: avc: received policyload notice (seqno=2) May 26 12:15:08 sysimage useradd[4950]: failed adding user 'gdm', data deleted May 26 12:24:39 sysimage dbus: avc: received policyload notice (seqno=3) May 26 12:25:24 sysimage useradd[5522]: failed adding user 'mysql', data deleted May 26 12:25:37 sysimage useradd[5533]: failed adding user 'rpcuser', data deleted May 26 12:26:31 sysimage useradd[5592]: failed adding user 'tcpdump', data deleted Any suggestions before I revert installation to F14?

  Read the article

• Deployment and Ownership issues

  - by kylemac

  As an extreme newbie, I am having difficulty managing ownership and permissions on my first box. What I can't figure out is how to deploy using one user, we will call him deploy and operate my php application with www-data user. Currently as it stands, I know my server runs as www-data through this function <?php echo(exec("whoami")); ?> but I am having to chown between deploy and www-data every time I deploy. There has got to be an easier way to deploy with one user and still run as www-data. EDIT: Here is the output from ls- l on the folder in question. You will see user deploy and group www-pub, the group is from an attempt to add the two different users to a new group and chown one of them in the hopes that they both would have the permissions (newb alert) drwxrwxr-x 4 deploy www-pub 4096 Mar 7 01:41 example.com I am using capistrano for deployment under the user deploy then once its done i chown to www-data, otherwise I can't use php to manipulate files. I am also unsure how to even change which user apache is running.

  Read the article

• ajax.googleapis.com stopping my Firefox

  - by Oscar Reyes

  Today for some strange reason, Firefox stops working properly because it is trying to fetch something from ajax.googleapis.com. Is there something I can do to avoid this? Safari and Chrome work just fine. I tried uninstalling Firebug and clearing the cache. The only thing that worked was disabling the JavaScript altogether. This seems to be the culprit link: http://ajax.googleapis.com/ajax/libs/jquery/1.3.2/jquery.min.js What can I do? EDIT I think I have found where the problem is. My proxy is serving one byte at a time the file, so firefox consume it at that peace. What I don't understand is why Safari and Chrome takes it right away. What I did last night was, leave the FF open all the night to give him change to load the file, my hope was that I got cached and the next time there was no need to go for it. Today in the morning, the page load successfully but the page was not cached, because the next request failed the same. Here's a video showing the problem:

  Read the article

• Wrong CSS mime type with Roundcube 0.5 beta and nginx

  - by Julien Vehent

  I'm running into a CSS problem. This is a setup based on Debian Squeeze (nginx/0.7.67, php5/cgi) on which I installed the latest Roundcube 0.5 beta. PHP is properly processed, login works fine but the CSS files are not loaded and Firefox is throwing the following errors: Error: The stylesheet https://webmail.example.net:10443/roundcube/skins/default/common.css?s=1290600165 was not loaded because its MIME type, "text/html", is not "text/css". Source File: https://webmail.example.net:10443/roundcube/?_task=login Line: 0 Error: The stylesheet https://webmail.example.net:10443/roundcube/skins/default/mail.css?s=1290156319 was not loaded because its MIME type, "text/html", is not "text/css". Source File: https://webmail.example.net:10443/roundcube/?_task=login Line: 0 As far as I understand, nginx doesn't see the .css extension (because ofthe ?s= argument) and thus set the mime type with the default value, being text/html. Should I fix this in nginx (and how ?) or is it roundcube's related ? Edit: It seems that it's nginx related. The content-type isn't set for any other type than text/html. I had to include manually the following declarations to force CSS and JS content-types. That's ugly, and I never had the problem before... any idea ? location ~ \.css { add_header Content-Type text/css; } location ~ \.js { add_header Content-Type application/x-javascript; }

  Read the article

• Linux: How do I remove bootchart from the boot process?

  - by java.is.for.desktop

  Hello, everyone! I have OpenSUSE 11.2. I removed bootchart and forgot to run mkinitrd. Now, right at the start of the boot process, I get boot/93-bootchart.sh: line 17: 462 Terminated stopinitrd 5 I Can't find any 93-bootchart.sh anywhere. Failsafe boot mode doesn't help. Earlier I got an error message about non existing /sbin/bootchartd, but I just copied /bin/cat to /sbin/bootchartd using a GParted boot disk. I tried to use chroot with an OpenSUSE boot disk, but mkinitrd can't find the root device, which is there actually (/dev/sda5). How can I make my system boot again? EDIT Ok, now I managed to re-install the bootchart rpm, using OpenSUSE boot disk and chmod. The system starts again. But that annoying bootchart is still there. I will not try again to remove it. First I will try to figure out, how to disable it during the boot process. Hopefully with your help ;)

  Read the article

• Using git through cygwin on windows 8

  - by 9point6

  I've got a windows 8 dev preview (not sure if it's relevant, but I never had this hassle on w7) machine and I'm trying to clone a git repo from github. The problem is that my ~/.ssh/id_rsa has 440 permissions and it needs to be 400. I've tried chmodding it but the any changes on the user permissions gets reflected in the group permissions (i.e. chmod 600 results in 660, etc). This appears to be constant throughout any file in the whole filesystem. I've tried messing with the ACLs but to no avail (full control on my user and deny everyone resulted in 000) here's a few outputs to help: $ git clone [removed] Cloning into [removed]... @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ WARNING: UNPROTECTED PRIVATE KEY FILE! @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ Permissions 0660 for '/home/john/.ssh/id_rsa' are too open. It is required that your private key files are NOT accessible by others. This private key will be ignored. bad permissions: ignore key: /home/john/.ssh/id_rsa Permission denied (publickey). fatal: The remote end hung up unexpectedly $ ll ~/.ssh total 6 -r--r----- 1 john None 1675 Nov 30 19:15 id_rsa -rw-rw---- 1 john None 411 Nov 30 19:15 id_rsa.pub -rw-rw-r-- 1 john None 407 Nov 30 18:43 known_hosts $ chmod -v 400 ~/.ssh/id_rsa mode of `/home/john/.ssh/id_rsa' changed from 0440 (r--r-----) to 0400 (r--------) $ ll ~/.ssh total 6 -r--r----- 1 john None 1675 Nov 30 19:15 id_rsa -rw-rw---- 1 john None 411 Nov 30 19:15 id_rsa.pub -rw-rw-r-- 1 john None 407 Nov 30 18:43 known_hosts $ set | grep CYGWIN CYGWIN='sbmntsec ntsec server ntea' I realize I could use msysgit or something, but I'd prefer to be able to do everything from a single terminal Edit: Msysgit doesn't work either for the same reasons

  Read the article

• Apache2 - rewrite a bunch of specified pathname URLs to one URL

  - by James Nine

  I need to rewrite a bunch of urls (about 100 or so) for SEO purposes, and there may be more being added in the future (probably another 50-100 later on). I need a flexible way of doing this and so far, the only way I can think of is to edit the .htaccess file using the rewrite engine. For example, I have a bunch of urls like this (please note that the query string is irrelevant, and dynamic; it could be anything. I was only using them purely as an example. I am only focusing on the pathname--the part between the hostname and query string, as marked in bold below): http://example.com/seo_term1?utm_source=google&utm_medium=cpc&utm_campaign=seo_term http://example.com/another_seo_term2?utm_source=facebook&utm_medium=cpc&utm_campaign=seo_term http://example.com/yet_another_seo_term3?utm_source=example_ad_network&utm_medium=cpc&utm_campaign=seo_term http://example.com/foobar_seo_term4 http://example.com/blah_seo_term5?test=1 etc... And they are all being rewritten to (for now): http://example.com/ What's the most efficient/effective way of doing this so that I may be able to add more terms in the future? One solution I came across is to do this (in the .htaccess file): RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ / [NC,QSA] However, the problem with this solution is that even invalid urls (such as http://example.com/blah) will be rewritten to http://example.com instead of giving a 404 code (which is what it is supposed to do anyway). I'm still trying to figure out how all this works, and the only way I can think of is to write 100 more RewriteCond statements (such as: RewriteCond %{REQUEST_URI} =/seo_term1 [NC,OR]) before the RewriteRule directive. For example: RewriteEngine on RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} =/seo_term1 [NC,OR] RewriteCond %{REQUEST_URI} =/another_seo_term2 [NC,OR] RewriteCond %{REQUEST_URI} =/yet_another_seo_term3 [NC,OR] RewriteCond %{REQUEST_URI} =/foobar_seo_term4 [NC,OR] RewriteCond %{REQUEST_URI} =/blah_seo_term5 [NC] RewriteRule ^(.*)$ / [NC,QSA] But that doesn't sound very efficient to me. Is there a better way?

  Read the article

• Network bridge does not work on Windows 7

  - by D. Strout

  I am trying to use Windows 7 to bridge my wireless and wired connections together to get wireless on a second Windows XP computer (fresh install). The network bridge is created successfully, but when I connect the cable from the first computer with the bridged connections to the second one with just a wired connection, nothing happens. The second computer doesn't connect, and the first computer shows no sign of anything different. I tried bridging the connections of a third computer, and connecting this computer to the second computer. This worked (third computer bridged the wireless to the second computer). Thus, the problem must be with the first (Win 7) computer. However, I have no idea what the problem could be. All Internet Connection Sharing is turned off. Homegroup is disabled (it was originally enabled, I thought that might be a problem, so I disabled it). Also, I had VMWare fusion installed, and that created extra items in the "This connection uses the following items" box in the properties dialog. Thinking this might be causing issues, I uninstalled that too. Still, with everything I tried, I can't get it to work. Any suggestions? Edit: Another thing I noticed that might be worth mentioning: The network icon in the Win7 taskbar has a red X on it that means it's not connected, but when I click the icon, it says connected next to my wireless connection, and I am able to access the internet.

  Read the article

• x display problems in centos 5.5

  - by John Ruiz

  I have a Dell E510 desktop with a geForce 7200 instead of the ATI x600 it came with. I have attempted to install CentOS 5.4 x86_64 (DVD), CentOS 5.5 (net install), and CentOS 5.5 x86_64 (DVD). Gnome desktop. All of these run into the same issue. When I put the DVD into the machine and reboot, the installer begins and I select "graphical install". I see text that say anaconda is starting, and then my screen goes nuts. It's not black, but rather a screen full of diagonal stripes or multiple colors. So I attempted to do a text install of CentOS 5.5 (DVD) and got it installed. When I booted for the first time, I logged into the virtual console and started X (startx). The desktop came up and it already had the display properties GUI up. I changed it from 800x600 to 1680x1050, saw that there were updates available, installed them, and then rebooted. When I start X from the virtual console this time, I get exactly the same display problem as I described before. Does anyone know what might be causing this and what I can do about it? edit: I should also mention that I'm capable of installing Windows 7 and Ubuntu 10.04 onto this machine with absolutely no issues at all.

  Read the article

• How to configure multiple virtual hosts for multiple users on Linux/Apache2.2

  - by authentictech

  I want to set up a virtual hosting server on Linux/Apache2.2 that allows multiple users to set up multiple website domains as would be appropriate for commercial shared hosting. I have seen examples (from my then perspective as a shared hosting customer) that allow users to store their web files in their user home directory with directories to correspond to the virtual host domain, e.g.: /home/user1/www/example1.com /home/user2/www/example2.com instead of using /var/www Questions: How would you configure this in your Apache configuration files? (Don't worry about DNS) Is this the best way to manage multiple virtual hosts? Are there others? What safety or security issues do you think I should be aware of in doing this? Many thanks, folks. Edit: If you want to only answer question 1, please feel free, as that is the most urgent to me at this moment and I would consider that an answer to the question. I have done it for myself since posting, but I am not confident that it's the best solution and I would like to know how an experienced sysadmin would do it. Thanks.

  Read the article

• Exchange 2010 remove Arbitration mailbox and mailbox store db

  - by JNM

  I have a problem with Exchange 2010 which is a nightmare for me. The problem is, that in Exchange management console i have several store databases in database management tab. only one is mounted, because i am using it. the second one is mounted, but it was used on other server before (now that server is dead). that database mounted status is UNKNOWN. The file of that database does not exist, but it still shows there. I can't remove it from management console, because it has mailboxes. i removed all mailboxes and disabled two arbitrary mailboxes. i can't delete it because i still have one arbitrary mailbox left. i can't move it, because it requires connection to dead server. i can't disable it, because i get error that it is the last one in organization. Can somebody help me? Solved it by using this command: Get-Mailbox -Arbitration -Database db1 | Remove-Mailbox -Arbitration -RemoveLastArbitrationMailboxAllowed Now i have another problem. Exchange management console shows public folder from different server which is dead now. That folder was copied here, but it is not needed anymore. Public folder file has been deleted, and records from ADSI edit has been removed too. But i can't remove that folder from management console. i get an error Exchange isn't able to check for public folder replicas for "My Public Folder Database". Anybody can help me with that?

  Read the article

• exporting clip in Final Cut Pro X or related video editing software on Mac

  - by user46976

  I'm using Final Cut Pro X to edit a 1 hour long video. I made individual clips from it in Final Cut Pro X and I want to save just these clips, some of which are only 5 mins long. How can I do this? I tried using the app ClipExporter, but it won't even read my .fcpxml file, it just says that it's not a valid file and gives no helpful information at all. Another method I tried was to assign roles to each clip. I made one clip, 5 mins long, and then used Share - Export in Final Cut Pro X and chose the option to export roles as separate files. However, the export still estimates that it will take over an hour to export and so it looks like it's trying to export the whole movie, rather than the simple 5 min clip which should be exportable as a .MOV or related formats in a few minutes. How can I do this in final cut pro x? I'm also happy to switch to related video editing software as long as they are not extremely expensive. This seems like a very trivial and obvious feature: take a segment from a long movie and export just the selected region of it... I don't understand why it's so complicated to do in Final Cut Pro X. Thanks.

  Read the article

• how to authenticate once for multiple servers, using only apache configs?

  - by Wang

  My problem is, I have a number of prepackaged web apps (a print system, a wiki, a bug tracker, an email archive, etc.) running on different Mac OS X Leopard (soon to be SL) servers that each need to authenticate users from the internet at large. Right now every server presents an Apache basic authentication prompt, which takes a shared login, but it's apparently enough of an inconvenience to log in repeatedly that people are sending email without checking the wiki or bug tracker or archive. In the case of the bug tracker, a user [might need to log in twice---once for apache if he hasn't used any other protected service on that server, once for the bug tracker itself so it can distinguish different people. Since the only common component to all these apps is Apache 2 itself, does it have any way of authenticating a user once, in some way that will be respected by other servers and various web apps? Looked at http://serverfault.com/questions/32421/how-is-session-stickiness-achieved-across-multiple-web-servers but it sounds like the answer is assuming that I get to write my own web app. Looked at Ian Bicking's blog but it's four years old and recommends something available only for apache 1.3, not apache 2. Sorry not to hyperlink the second site---apparently I need 10 reputation points. Edit: Shibboleth does what I need, but I should have specified that I'm looking for a really dumb, really simple solution for in-house services that need to handle all of a dozen users, probably not more than three at a time.

  Read the article

• How do I configure custom URL handlers on OS X?

  - by cwd

  I've been reading a lot online about custom URL handlers / custom protocol handlers such as: Launching External Applications using Custom Protocols under OSX OS X URL handler to open links to local files I get that you can tell the system that a particular program is able to handle a certain scheme / protocol with the Info.plist file: <key>CFBundleURLTypes</key> <array> <dict> <key>CFBundleURLName</key> <string>Local File</string> <key>CFBundleURLSchemes</key> <array> <string>local</string> </array> </dict> </array> <key>NSUIElement</key> <true/> But if there are multiple applications that are capable of opening the same URL handler, such as mailto: how do you specify which one you want the system to use? There were some references to utilities like the More Internet preference pane which no longer seems to be available from the author's site. I did find it online by Googling but it seems a bit shaky - like it was written for an older OSX - perhaps Tiger. I haven't been able to find information on how to set the URL handler for protocols and custom protocols. I'm assuming there is a plist file somewhere that I can edit - or maybe there is a newer, better utility that works well with Mountain Lion?

  Read the article

• BIOS unable to boot CD or Hard Drive

  - by Gabriel

  Motherboard Intel DQ35MP. HDD Caviar Green 1TB. I'm having problems with my BIOS and/or hard drive/disc drive. Came back from a trip, booted my computer, and realized that the BIOS wasn't booting anymore, just a black screen with no beep sounds. Only fans and lights on. Then I thought it might be caused by the video card, I removed it, and still no BIOS screen. Then I removed the hard drive and voila BIOS screen is back again. If the hard drive is defective then I can check that with a Rescue Disk. I inserted the CD on the Disc Tray but the computer did not respond to it, the screen freezes in black with an "E7" string at the bottom right corner just after the BIOS screen, this happens with or without discs. BIOS settings are set to default, and CD reading is on top of the boot device list. EDIT I removed the BIOS battery, rebooted the CPU, the BIOS screen showed up, and then it freezed in E7. Placed the BIOS batttery, rebooted and same thing, we are stuck with the E7 string. I uploaded a video to illustrate the problem http://www.youtube.com/watch?v=13jPdBcIrBU

  Read the article

< Previous Page | 515 516 517 518 519 520 521 522 523 524 525 526  | Next Page >