Search Results

Search found 2476 results on 100 pages for 'aaron james'.

Page 52/100 | < Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >

  • MIPS (or SPIM): Loading floating point numbers...

    - by James
    Hey hey, I am working on a little mini compiler while trying to learn some MIPS here. Here's my issue: MIPS has an instruction li (load immediate) which would work like this li $5,100 which would load 100 into register 5. However, I need to load floats into registers right now and am struggling with figuring out a way to do it...since li $5,2.5 does not work. Anyone have any advice? I am working in C, I was thinking I could somehow get the integer representation of the float I am working with (i.e. so the floats binary representation == the ints binary representation) then load the "integer" into the register and treat it like a float from then on. Maybe its too late but Im stuck right now.

    Read the article

  • WPF - Translate a point relative to MainWindow to it's coordinates relative to a child control

    - by James Cadd
    Is it possible to translate a point relative to MainWindow to be relative to one of its child controls? For example, say a control's upper left corner was located at 500, 500 relative to MainWindow what code would convert that number to (0, 0)? I'd like the solution to be agnostic of the layout mechanism (i.e. not require me to parent the control in a Canvas and use the Top and Bottom methods).

    Read the article

  • Why does async BeginReceiveFrom never time out on a raw socket?

    - by James Hugard
    Writing an asynchronous Ping using Raw Sockets in F#, to enable parallel requests using as few threads as possible. Not using "System.Net.NetworkInformation.Ping", because it appears to allocate one thread per request. Am also interested in using F# async workflows. The synchronous version below correctly times out when the target host does not exist/respond, but the asynchronous version hangs. Both work when the host does respond. Not sure if this is a .NET issue, or an F# one... Any ideas? (note: the process must run as Admin to allow Raw Socket access) This throws a timeout: let result = Ping.Ping ( IPAddress.Parse( "192.168.33.22" ), 1000 ) However, this hangs: let result = Ping.AsyncPing ( IPAddress.Parse( "192.168.33.22" ), 1000 ) |> Async.RunSynchronously Here's the code... module Ping open System open System.Net open System.Net.Sockets open System.Threading //---- ICMP Packet Classes type IcmpMessage (t : byte) = let mutable m_type = t let mutable m_code = 0uy let mutable m_checksum = 0us member this.Type with get() = m_type member this.Code with get() = m_code member this.Checksum = m_checksum abstract Bytes : byte array default this.Bytes with get() = [| m_type m_code byte(m_checksum) byte(m_checksum >>> 8) |] member this.GetChecksum() = let mutable sum = 0ul let bytes = this.Bytes let mutable i = 0 // Sum up uint16s while i < bytes.Length - 1 do sum <- sum + uint32(BitConverter.ToUInt16( bytes, i )) i <- i + 2 // Add in last byte, if an odd size buffer if i <> bytes.Length then sum <- sum + uint32(bytes.[i]) // Shuffle the bits sum <- (sum >>> 16) + (sum &&& 0xFFFFul) sum <- sum + (sum >>> 16) sum <- ~~~sum uint16(sum) member this.UpdateChecksum() = m_checksum <- this.GetChecksum() type InformationMessage (t : byte) = inherit IcmpMessage(t) let mutable m_identifier = 0us let mutable m_sequenceNumber = 0us member this.Identifier = m_identifier member this.SequenceNumber = m_sequenceNumber override this.Bytes with get() = Array.append (base.Bytes) [| byte(m_identifier) byte(m_identifier >>> 8) byte(m_sequenceNumber) byte(m_sequenceNumber >>> 8) |] type EchoMessage() = inherit InformationMessage( 8uy ) let mutable m_data = Array.create 32 32uy do base.UpdateChecksum() member this.Data with get() = m_data and set(d) = m_data <- d this.UpdateChecksum() override this.Bytes with get() = Array.append (base.Bytes) (this.Data) //---- Synchronous Ping let Ping (host : IPAddress, timeout : int ) = let mutable ep = new IPEndPoint( host, 0 ) let socket = new Socket( AddressFamily.InterNetwork, SocketType.Raw, ProtocolType.Icmp ) socket.SetSocketOption( SocketOptionLevel.Socket, SocketOptionName.SendTimeout, timeout ) socket.SetSocketOption( SocketOptionLevel.Socket, SocketOptionName.ReceiveTimeout, timeout ) let packet = EchoMessage() let mutable buffer = packet.Bytes try if socket.SendTo( buffer, ep ) <= 0 then raise (SocketException()) buffer <- Array.create (buffer.Length + 20) 0uy let mutable epr = ep :> EndPoint if socket.ReceiveFrom( buffer, &epr ) <= 0 then raise (SocketException()) finally socket.Close() buffer //---- Entensions to the F# Async class to allow up to 5 paramters (not just 3) type Async with static member FromBeginEnd(arg1,arg2,arg3,arg4,beginAction,endAction,?cancelAction): Async<'T> = Async.FromBeginEnd((fun (iar,state) -> beginAction(arg1,arg2,arg3,arg4,iar,state)), endAction, ?cancelAction=cancelAction) static member FromBeginEnd(arg1,arg2,arg3,arg4,arg5,beginAction,endAction,?cancelAction): Async<'T> = Async.FromBeginEnd((fun (iar,state) -> beginAction(arg1,arg2,arg3,arg4,arg5,iar,state)), endAction, ?cancelAction=cancelAction) //---- Extensions to the Socket class to provide async SendTo and ReceiveFrom type System.Net.Sockets.Socket with member this.AsyncSendTo( buffer, offset, size, socketFlags, remoteEP ) = Async.FromBeginEnd( buffer, offset, size, socketFlags, remoteEP, this.BeginSendTo, this.EndSendTo ) member this.AsyncReceiveFrom( buffer, offset, size, socketFlags, remoteEP ) = Async.FromBeginEnd( buffer, offset, size, socketFlags, remoteEP, this.BeginReceiveFrom, (fun asyncResult -> this.EndReceiveFrom(asyncResult, remoteEP) ) ) //---- Asynchronous Ping let AsyncPing (host : IPAddress, timeout : int ) = async { let ep = IPEndPoint( host, 0 ) use socket = new Socket( AddressFamily.InterNetwork, SocketType.Raw, ProtocolType.Icmp ) socket.SetSocketOption( SocketOptionLevel.Socket, SocketOptionName.SendTimeout, timeout ) socket.SetSocketOption( SocketOptionLevel.Socket, SocketOptionName.ReceiveTimeout, timeout ) let packet = EchoMessage() let outbuffer = packet.Bytes try let! result = socket.AsyncSendTo( outbuffer, 0, outbuffer.Length, SocketFlags.None, ep ) if result <= 0 then raise (SocketException()) let epr = ref (ep :> EndPoint) let inbuffer = Array.create (outbuffer.Length + 256) 0uy let! result = socket.AsyncReceiveFrom( inbuffer, 0, inbuffer.Length, SocketFlags.None, epr ) if result <= 0 then raise (SocketException()) return inbuffer finally socket.Close() }

    Read the article

  • GoogleAppEngine : possible to disable FileUpload?

    - by James.Elsey
    Hi, When I deploy my application to GoogleAppEngine I keep getting the following error Uncaught exception from servlet java.lang.NoClassDefFoundError: java.io.FileOutputStream is a restricted class. Please see the Google App Engine developer's guide for more details. at com.google.apphosting.runtime.security.shared.stub.java.io.FileOutputStream.<clinit>(FileOutputStream.java) at org.apache.log4j.FileAppender.setFile(FileAppender.java:289) at org.apache.log4j.FileAppender.activateOptions(FileAppender.java:163) at org.apache.log4j.config.PropertySetter.activate(PropertySetter.java:256) at org.apache.log4j.config.PropertySetter.setProperties(PropertySetter.java:132) at org.apache.log4j.config.PropertySetter.setProperties(PropertySetter.java:96) at org.apache.log4j.PropertyConfigurator.parseAppender(PropertyConfigurator.java:654) at org.apache.log4j.PropertyConfigurator.parseCategory(PropertyConfigurator.java:612) at org.apache.log4j.PropertyConfigurator.configureRootCategory(PropertyConfigurator.java:509) at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyConfigurator.java:415) at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyConfigurator.java:441) at org.apache.log4j.helpers.OptionConverter.selectAndConfigure(OptionConverter.java:468) at org.apache.log4j.LogManager.<clinit>(LogManager.java:122) at org.slf4j.impl.Log4jLoggerFactory.getLogger(Log4jLoggerFactory.java:73) at org.slf4j.LoggerFactory.getLogger(LoggerFactory.java:88) at org.apache.commons.logging.impl.SLF4JLogFactory.getInstance(SLF4JLogFactory.java:155) at org.apache.commons.logging.impl.SLF4JLogFactory.getInstance(SLF4JLogFactory.java:131) at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:685) at org.springframework.web.context.ContextLoader.<clinit>(ContextLoader.java:146) at org.springframework.web.context.ContextLoaderListener.createContextLoader(ContextLoaderListener.java:53) at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:44) at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler.java:548) at org.mortbay.jetty.servlet.Context.startContext(Context.java:136) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java:1250) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java:517) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java:467) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java:50) at com.google.apphosting.runtime.jetty.AppVersionHandlerMap.createHandler(AppVersionHandlerMap.java:191) at com.google.apphosting.runtime.jetty.AppVersionHandlerMap.getHandler(AppVersionHandlerMap.java:168) at com.google.apphosting.runtime.jetty.JettyServletEngineAdapter.serviceRequest(JettyServletEngineAdapter.java:123) at com.google.apphosting.runtime.JavaRuntime.handleRequest(JavaRuntime.java:243) at com.google.apphosting.base.RuntimePb$EvaluationRuntime$6.handleBlockingRequest(RuntimePb.java:5485) at com.google.apphosting.base.RuntimePb$EvaluationRuntime$6.handleBlockingRequest(RuntimePb.java:5483) at com.google.net.rpc.impl.BlockingApplicationHandler.handleRequest(BlockingApplicationHandler.java:24) at com.google.net.rpc.impl.RpcUtil.runRpcInApplication(RpcUtil.java:398) at com.google.net.rpc.impl.Server$2.run(Server.java:852) at com.google.tracing.LocalTraceSpanRunnable.run(LocalTraceSpanRunnable.java:56) at com.google.tracing.LocalTraceSpanBuilder.internalContinueSpan(LocalTraceSpanBuilder.java:536) at com.google.net.rpc.impl.Server.startRpc(Server.java:807) at com.google.net.rpc.impl.Server.processRequest(Server.java:369) at com.google.net.rpc.impl.ServerConnection.messageReceived(ServerConnection.java:442) at com.google.net.rpc.impl.RpcConnection.parseMessages(RpcConnection.java:319) at com.google.net.rpc.impl.RpcConnection.dataReceived(RpcConnection.java:290) at com.google.net.async.Connection.handleReadEvent(Connection.java:474) at com.google.net.async.EventDispatcher.processNetworkEvents(EventDispatcher.java:831) at com.google.net.async.EventDispatcher.internalLoop(EventDispatcher.java:207) at com.google.net.async.EventDispatcher.loop(EventDispatcher.java:103) at com.google.net.rpc.RpcService.runUntilServerShutdown(RpcService.java:251) at com.google.apphosting.runtime.JavaRuntime$RpcRunnable.run(JavaRuntime.java:404) at java.lang.Thread.run(Unknown Source) I've checked the documentation and it suggests to create a FileUpload class, since I won't be uploading files/documents etc from my application, is this necessary? Is there a way to disable this functionality, or at least bypass this error? I have already provided implementation for a MultipartWrapperFactory.Class as that has been suggested from searching for this error Thanks

    Read the article

  • how to auto select the first index in a sparks List control in flex4

    - by james
    hi i have a spark List control. it has a dataProvider that shows reply from twitter search. i have created a function for change handler like this: protected function list_changeHandler(event:IndexChangeEvent):void { ta.text = coverflow.selectedItem.title; } so, whenever i select each of the items in the List i will see the message(ta.text) but now, instead of me manually clicking the first time, i want it to automatically click/select the first item and see the first message(ta.text) how do i do it? ... newbie to flex ... :p

    Read the article

  • Sphinx PHP Geodist problems

    - by James
    Below is my PHP function to call nearby points using Sphinx for MySQL. There are hundreds of thousands of nearby points which to what I can tell, are being indexed by Sphinx, but simply fails silently when searching with Sphinx. Other Sphinx queries I run against other indexes work completely fine. function nearby($latitude, $longitude, $radius) { global $sphinx; $sphinx->SetMatchMode(SPH_MATCH_ALL); $sphinx->SetArrayResult(true); $sphinx->SetLimits(0, 1000); $sphinx->SetGeoAnchor('latitude', 'longitude', (float) deg2rad($latitude), (float) deg2rad($longitude)); $circle = (float) $radius * 1.609344; $sphinx->SetFilterFloatRange('@geodist', 0.0, $circle); $matches = $sphinx->Query('', 'geo'); return $matches; } $nearby = nearby($latitude, $longitude, 10000); var_dump($nearby); This, when called with valid latitude and longitude co-ords and a very large radius for debugging produces: bool(false) Below is my sphinx.conf covering the geo part: source geo { type = mysql sql_host = 127.0.0.1 sql_user = user sql_pass = pass sql_db = db sql_port = 3306 sql_query_pre = set names utf8 sql_query_pre = set session query_cache_type=OFF sql_query = SELECT id,city,region,country,radians(longitude) AS longitude, radians(latitude) AS latitude FROM points; sql_attr_float = longitude sql_attr_float = latitude sql_ranged_throttle = 0 sql_query_info = SELECT * FROM points WHERE id = $id } index geo { source = geo path = /var/data/geo docinfo = extern #mlock = 0 #morphology = none min_word_len = 1 charset_type = utf-8 #charset_table = 0..9, A..Z->a..z, _, a..z, U+410..U+42F->U+430..U+44F, U+430..U+44F ignore_chars = U+00AD html_strip = 0 enable_star = 0 } indexer { mem_limit = 1024M } searchd { port = 3312 log = /var/log/searchd.log query_log = /var/log/query.log read_timeout = 5 max_children = 5 pid_file = /var/log/searchd.pid max_matches = 10000 seamless_rotate = 1 preopen_indexes = 0 unlink_old = 1 }

    Read the article

  • iPhone Image Processing--matrix convolution

    - by James
    I am implementing a matrix convolution blur on the iPhone. The following code converts the UIImage supplied as an argument of the blur function into a CGImageRef, and then stores the RGBA values in a standard C char array. CGImageRef imageRef = imgRef.CGImage; int width = imgRef.size.width; int height = imgRef.size.height; CGColorSpaceRef colorSpace = CGColorSpaceCreateDeviceRGB(); unsigned char *pixels = malloc((height) * (width) * 4); NSUInteger bytesPerPixel = 4; NSUInteger bytesPerRow = bytesPerPixel * (width); NSUInteger bitsPerComponent = 8; CGContextRef context = CGBitmapContextCreate(pixels, width, height, bitsPerComponent, bytesPerRow, colorSpace, kCGImageAlphaPremultipliedLast | kCGBitmapByteOrder32Big); CGContextDrawImage(context, CGRectMake(0, 0, width, height), imageRef); CGContextRelease(context); Then the pixels values stored in the pixels array are convolved, and stored in another array. unsigned char *results = malloc((height) * (width) * 4); Finally, these augmented pixel values are changed back into a CGImageRef, converted to a UIImage, and the returned at the end of the function with the following code. context = CGBitmapContextCreate(results, width, height, bitsPerComponent, bytesPerRow, colorSpace, kCGImageAlphaPremultipliedLast | kCGBitmapByteOrder32Big); CGImageRef finalImage = CGBitmapContextCreateImage(context); UIImage *newImage = [UIImage imageWithCGImage:CGBitmapContextCreateImage(context)]; CGImageRelease(finalImage); NSLog(@"edges found"); free(results); free(pixels); CGColorSpaceRelease(colorSpace); return newImage; This works perfectly, once. Then, once the image is put through the filter again, very odd, unprecedented pixel values representing input pixel values that don't exist, are returned. Is there any reason why this should work the first time, but then not afterward? Beneath is the entirety of the function. -(UIImage*) blur:(UIImage*)imgRef { CGImageRef imageRef = imgRef.CGImage; int width = imgRef.size.width; int height = imgRef.size.height; CGColorSpaceRef colorSpace = CGColorSpaceCreateDeviceRGB(); unsigned char *pixels = malloc((height) * (width) * 4); NSUInteger bytesPerPixel = 4; NSUInteger bytesPerRow = bytesPerPixel * (width); NSUInteger bitsPerComponent = 8; CGContextRef context = CGBitmapContextCreate(pixels, width, height, bitsPerComponent, bytesPerRow, colorSpace, kCGImageAlphaPremultipliedLast | kCGBitmapByteOrder32Big); CGContextDrawImage(context, CGRectMake(0, 0, width, height), imageRef); CGContextRelease(context); height = imgRef.size.height; width = imgRef.size.width; float matrix[] = {0,0,0,0,1,0,0,0,0}; float divisor = 1; float shift = 0; unsigned char *results = malloc((height) * (width) * 4); for(int y = 1; y < height; y++){ for(int x = 1; x < width; x++){ float red = 0; float green = 0; float blue = 0; int multiplier=1; if(y>0 && x>0){ int index = (y-1)*width + x; red = matrix[0]*multiplier*(float)pixels[4*(index-1)] + matrix[1]*multiplier*(float)pixels[4*(index)] + matrix[2]*multiplier*(float)pixels[4*(index+1)]; green = matrix[0]*multiplier*(float)pixels[4*(index-1)+1] + matrix[1]*multiplier*(float)pixels[4*(index)+1] + matrix[2]*multiplier*(float)pixels[4*(index+1)+1]; blue = matrix[0]*multiplier*(float)pixels[4*(index-1)+2] + matrix[1]*multiplier*(float)pixels[4*(index)+2] + matrix[2]*multiplier*(float)pixels[4*(index+1)+2]; index = (y)*width + x; red = red+ matrix[3]*multiplier*(float)pixels[4*(index-1)] + matrix[4]*multiplier*(float)pixels[4*(index)] + matrix[5]*multiplier*(float)pixels[4*(index+1)]; green = green + matrix[3]*multiplier*(float)pixels[4*(index-1)+1] + matrix[4]*multiplier*(float)pixels[4*(index)+1] + matrix[5]*multiplier*(float)pixels[4*(index+1)+1]; blue = blue + matrix[3]*multiplier*(float)pixels[4*(index-1)+2] + matrix[4]*multiplier*(float)pixels[4*(index)+2] + matrix[5]*multiplier*(float)pixels[4*(index+1)+2]; index = (y+1)*width + x; red = red+ matrix[6]*multiplier*(float)pixels[4*(index-1)] + matrix[7]*multiplier*(float)pixels[4*(index)] + matrix[8]*multiplier*(float)pixels[4*(index+1)]; green = green + matrix[6]*multiplier*(float)pixels[4*(index-1)+1] + matrix[7]*multiplier*(float)pixels[4*(index)+1] + matrix[8]*multiplier*(float)pixels[4*(index+1)+1]; blue = blue + matrix[6]*multiplier*(float)pixels[4*(index-1)+2] + matrix[7]*multiplier*(float)pixels[4*(index)+2] + matrix[8]*multiplier*(float)pixels[4*(index+1)+2]; red = red/divisor+shift; green = green/divisor+shift; blue = blue/divisor+shift; if(red<0){ red=0; } if(green<0){ green=0; } if(blue<0){ blue=0; } if(red>255){ red=255; } if(green>255){ green=255; } if(blue>255){ blue=255; } int realPos = 4*(y*imgRef.size.width + x); results[realPos] = red; results[realPos + 1] = green; results[realPos + 2] = blue; results[realPos + 3] = 1; }else { int realPos = 4*((y)*(imgRef.size.width) + (x)); results[realPos] = 0; results[realPos + 1] = 0; results[realPos + 2] = 0; results[realPos + 3] = 1; } } } context = CGBitmapContextCreate(results, width, height, bitsPerComponent, bytesPerRow, colorSpace, kCGImageAlphaPremultipliedLast | kCGBitmapByteOrder32Big); CGImageRef finalImage = CGBitmapContextCreateImage(context); UIImage *newImage = [UIImage imageWithCGImage:CGBitmapContextCreateImage(context)]; CGImageRelease(finalImage); free(results); free(pixels); CGColorSpaceRelease(colorSpace); return newImage;} THANKS!!!

    Read the article

  • cakephp bake view Errors

    - by James
    I have previously baked a controller for a model that I have created. When attempting to bake the view using cakephp I get the following errors: Interactive Bake Shell --------------------------------------------------------------- [D]atabase Configuration [M]odel [V]iew [C]ontroller [P]roject [Q]uit What would you like to Bake? (D/M/V/C/P/Q) > v --------------------------------------------------------------- Bake View Path: /Applications/MAMP/htdocs/app/views/ --------------------------------------------------------------- Possible Controllers based on your current database: 1. Dealers 2. Products 3. Users Enter a number from the list above, type in the name of another controller, or 'q' to exit [q] > 2 Would you like to create some scaffolded views (index, add, view, edit) for this controller? NOTE: Before doing so, you'll need to create your controller and model classes (including associated models). (y/n) [n] > y Would you like to create the views for admin routing? (y/n) [y] > n Warning: mysql_query() expects parameter 2 to be resource, boolean given in /Applications/MAMP/htdocs/cake/libs/model/datasources/dbo/dbo_mysql.php on line 500 Warning: mysql_errno() expects parameter 1 to be resource, boolean given in /Applications/MAMP/htdocs/cake/libs/model/datasources/dbo/dbo_mysql.php on line 576 Warning: Invalid argument supplied for foreach() in /Applications/MAMP/htdocs/cake/libs/model/datasources/dbo/dbo_mysql.php on line 102 Warning: array_keys() expects parameter 1 to be array, boolean given in /Applications/MAMP/htdocs/cake/console/libs/tasks/view.php on line 263 Warning: mysql_query() expects parameter 2 to be resource, boolean given in /Applications/MAMP/htdocs/cake/libs/model/datasources/dbo/dbo_mysql.php on line 500 Warning: mysql_errno() expects parameter 1 to be resource, boolean given in /Applications/MAMP/htdocs/cake/libs/model/datasources/dbo/dbo_mysql.php on line 576 Warning: Invalid argument supplied for foreach() in /Applications/MAMP/htdocs/cake/libs/model/datasources/dbo/dbo_mysql.php on line 102 Warning: array_keys() expects parameter 1 to be array, boolean given in /Applications/MAMP/htdocs/cake/console/libs/tasks/view.php on line 382 Creating file /Applications/MAMP/htdocs/app/views/products/index.ctp Wrote /Applications/MAMP/htdocs/app/views/products/index.ctp Creating file /Applications/MAMP/htdocs/app/views/products/view.ctp Wrote /Applications/MAMP/htdocs/app/views/products/view.ctp Creating file /Applications/MAMP/htdocs/app/views/products/add.ctp Wrote /Applications/MAMP/htdocs/app/views/products/add.ctp Creating file /Applications/MAMP/htdocs/app/views/products/edit.ctp Wrote /Applications/MAMP/htdocs/app/views/products/edit.ctp --------------------------------------------------------------- View Scaffolding Complete. Anybody know why? Google hasn't been a whole lot of help. cakephp 1.2.6 under MAMP on OSX 10.6.2

    Read the article

  • How can I get ambethia's captcha plugin to work in rails 3?

    - by James
    I have installed ambethia's captcha plugin as a plugin in my rails 3 app. When I put the <%= recaptcha_tags %> in my view, it puts this on the page: <script type="text/javascript" src="http://api.recaptcha.net/challenge?k=my_key&error=expression"></script> <noscript> <iframe src="http://api.recaptcha.net/noscript?k=my_other_key" height="300" width="500" frameborder="0"></iframe><br/> <textarea name="recaptcha_challenge_field" rows="3" cols="40"></textarea> <input type="hidden" name="recaptcha_response_field" value="manual_challenge"></noscript> Is there a way that I can make this work in rails 3? I'd appreciate any help.

    Read the article

  • DBMS debugger causes TOAD to hang

    - by James Collins
    I can start the dbms debugger in Toad and use it normally but if I hit the 'halt execution' button or just hit the 'Run' button to reach the end of the function it causes TOAD to hang. Windows reports it as not responding and I have to kill it through the task manager. I have had this problem in Toad 9.7.2.5 and Toad 10 on two different laptops. Has anyone else experienced this problem? If you have did you find a solution to this?

    Read the article

  • jstl taglib not found, where have I gone wrong?

    - by James.Elsey
    I'm trying to add Google Maps onto my JSPs by using the googlemaps jstl taglib. I've added this into my maven pom <dependency> <groupId>com.lamatek</groupId> <artifactId>googlemaps</artifactId> <version>0.98c</version> <scope>provided<>/scope </dependency> This then included the googlemaps-0.98c library under my project libraries in NetBeans, I right clicked and selected Manually install artifact and located the googlemaps.jar file I had downloaded. I've then added this into my taglibs file <%@taglib prefix="googlemaps" uri="/WEB-INF/googlemaps" %> And have then included this where I actually want to show a map on my jsp <googlemaps:map id="map" width="250" height="300" version="2" type="STREET" zoom="12"> <googlemaps:key domain="localhost" key="xxxx"/> <googlemaps:point id="point1" address="74 Connors Lane" city="Elkton" state="MD" zipcode="21921" country="US"/> <googlemaps:marker id="marker1" point="point1"/> </googlemaps:map> But when I load up my application, I get the following error. org.apache.jasper.JasperException: /jsp/dashboard.jsp(1,1) /jsp/common/taglibs.jsp(6,56) PWC6117: File "/WEB-INF/googlemaps" not found root cause org.apache.jasper.JasperException: /jsp/common/taglibs.jsp(6,56) PWC6117: File "/WEB-INF/googlemaps" not found Have I missed something simple? I'm unable to spot what I've done wrong so far.. Thanks

    Read the article

  • How to detect a timeout when using asynchronous Socket.BeginReceive?

    - by James Hugard
    Writing an asynchronous Ping using Raw Sockets in F#, to enable parallel requests using as few threads as possible. Not using "System.Net.NetworkInformation.Ping", because it appears to allocate one thread per request. Am also interested in using F# async workflows. The synchronous version below correctly times out when the target host does not exist/respond, but the asynchronous version hangs. Both work when the host does respond. Not sure if this is a .NET issue, or an F# one... Any ideas? (note: the process must run as Admin to allow Raw Socket access) This throws a timeout: let result = Ping.Ping ( IPAddress.Parse( "192.168.33.22" ), 1000 ) However, this hangs: let result = Ping.AsyncPing ( IPAddress.Parse( "192.168.33.22" ), 1000 ) |> Async.RunSynchronously Here's the code... module Ping open System open System.Net open System.Net.Sockets open System.Threading //---- ICMP Packet Classes type IcmpMessage (t : byte) = let mutable m_type = t let mutable m_code = 0uy let mutable m_checksum = 0us member this.Type with get() = m_type member this.Code with get() = m_code member this.Checksum = m_checksum abstract Bytes : byte array default this.Bytes with get() = [| m_type m_code byte(m_checksum) byte(m_checksum >>> 8) |] member this.GetChecksum() = let mutable sum = 0ul let bytes = this.Bytes let mutable i = 0 // Sum up uint16s while i < bytes.Length - 1 do sum <- sum + uint32(BitConverter.ToUInt16( bytes, i )) i <- i + 2 // Add in last byte, if an odd size buffer if i <> bytes.Length then sum <- sum + uint32(bytes.[i]) // Shuffle the bits sum <- (sum >>> 16) + (sum &&& 0xFFFFul) sum <- sum + (sum >>> 16) sum <- ~~~sum uint16(sum) member this.UpdateChecksum() = m_checksum <- this.GetChecksum() type InformationMessage (t : byte) = inherit IcmpMessage(t) let mutable m_identifier = 0us let mutable m_sequenceNumber = 0us member this.Identifier = m_identifier member this.SequenceNumber = m_sequenceNumber override this.Bytes with get() = Array.append (base.Bytes) [| byte(m_identifier) byte(m_identifier >>> 8) byte(m_sequenceNumber) byte(m_sequenceNumber >>> 8) |] type EchoMessage() = inherit InformationMessage( 8uy ) let mutable m_data = Array.create 32 32uy do base.UpdateChecksum() member this.Data with get() = m_data and set(d) = m_data <- d this.UpdateChecksum() override this.Bytes with get() = Array.append (base.Bytes) (this.Data) //---- Synchronous Ping let Ping (host : IPAddress, timeout : int ) = let mutable ep = new IPEndPoint( host, 0 ) let socket = new Socket( AddressFamily.InterNetwork, SocketType.Raw, ProtocolType.Icmp ) socket.SetSocketOption( SocketOptionLevel.Socket, SocketOptionName.SendTimeout, timeout ) socket.SetSocketOption( SocketOptionLevel.Socket, SocketOptionName.ReceiveTimeout, timeout ) let packet = EchoMessage() let mutable buffer = packet.Bytes try if socket.SendTo( buffer, ep ) <= 0 then raise (SocketException()) buffer <- Array.create (buffer.Length + 20) 0uy let mutable epr = ep :> EndPoint if socket.ReceiveFrom( buffer, &epr ) <= 0 then raise (SocketException()) finally socket.Close() buffer //---- Entensions to the F# Async class to allow up to 5 paramters (not just 3) type Async with static member FromBeginEnd(arg1,arg2,arg3,arg4,beginAction,endAction,?cancelAction): Async<'T> = Async.FromBeginEnd((fun (iar,state) -> beginAction(arg1,arg2,arg3,arg4,iar,state)), endAction, ?cancelAction=cancelAction) static member FromBeginEnd(arg1,arg2,arg3,arg4,arg5,beginAction,endAction,?cancelAction): Async<'T> = Async.FromBeginEnd((fun (iar,state) -> beginAction(arg1,arg2,arg3,arg4,arg5,iar,state)), endAction, ?cancelAction=cancelAction) //---- Extensions to the Socket class to provide async SendTo and ReceiveFrom type System.Net.Sockets.Socket with member this.AsyncSendTo( buffer, offset, size, socketFlags, remoteEP ) = Async.FromBeginEnd( buffer, offset, size, socketFlags, remoteEP, this.BeginSendTo, this.EndSendTo ) member this.AsyncReceiveFrom( buffer, offset, size, socketFlags, remoteEP ) = Async.FromBeginEnd( buffer, offset, size, socketFlags, remoteEP, this.BeginReceiveFrom, (fun asyncResult -> this.EndReceiveFrom(asyncResult, remoteEP) ) ) //---- Asynchronous Ping let AsyncPing (host : IPAddress, timeout : int ) = async { let ep = IPEndPoint( host, 0 ) use socket = new Socket( AddressFamily.InterNetwork, SocketType.Raw, ProtocolType.Icmp ) socket.SetSocketOption( SocketOptionLevel.Socket, SocketOptionName.SendTimeout, timeout ) socket.SetSocketOption( SocketOptionLevel.Socket, SocketOptionName.ReceiveTimeout, timeout ) let packet = EchoMessage() let outbuffer = packet.Bytes try let! result = socket.AsyncSendTo( outbuffer, 0, outbuffer.Length, SocketFlags.None, ep ) if result <= 0 then raise (SocketException()) let epr = ref (ep :> EndPoint) let inbuffer = Array.create (outbuffer.Length + 256) 0uy let! result = socket.AsyncReceiveFrom( inbuffer, 0, inbuffer.Length, SocketFlags.None, epr ) if result <= 0 then raise (SocketException()) return inbuffer finally socket.Close() }

    Read the article

  • Visual Studio 2008 - Add Reference

    - by James Sun
    When adding a DLL as a reference to an ASP.Net project, VS2008 adds several files to the bin directory. If the DLL is called foo.dll, VS2008 adds foo.dll.refresh, foo.pdb and foo.xml. I know what foo.dll is :-), why does VS2008 add the other three files? What do those three files do? Can I delete them? Do they need to be added in source control?

    Read the article

  • RegLoadAppKey working fine on 32-bit OS, failing on 64-bit OS, even if both processes are 32-bit

    - by James Manning
    I'm using .NET 4 and the new RegistryKey.FromHandle call so I can take the hKey I get from opening a registry file with RegLoadAppKey and operate on it with the existing managed API. I thought at first it was just a matter of a busted DllImport and my call had an invalid type in the params or a missing MarshalAs or whatever, but looking at other registry functions and their DllImport declarations (for instance, on pinvoke.net), I don't see what else to try (I've had hKey returned as both int and IntPtr, both worked on 32-bit OS and fail on 64-bit OS) I've got it down to as simple a repro case as I can - it just tries to create a 'random' subkey then write a value to it. It works fine on my Win7 x86 box and fails on Win7 x64 and 2008 R2 x64, even when it's still a 32-bit process, even run from a 32-bit cmd prompt. EDIT: It also fails in the same way if it's a 64-bit process. on Win7 x86: INFO: Running as Admin in 32-bit process on 32-bit OS Was able to create Microsoft\Windows\CurrentVersion\RunOnceEx\a95b1bbf-7a04-4707-bcca-6aee6afbfab7 and write a value under it on Win7 x64, as 32-bit: INFO: Running as Admin in 32-bit process on 64-bit OS Unhandled Exception: System.UnauthorizedAccessException: Access to the registry key '\Microsoft\Windows\CurrentVersion\RunOnceEx\ce6d5ff6-c3af-47f7-b3dc-c5a1b9a3cd22' is denied. at Microsoft.Win32.RegistryKey.Win32Error(Int32 errorCode, String str) at Microsoft.Win32.RegistryKey.CreateSubKeyInternal(String subkey, RegistryKeyPermissionCheck permissionCheck, Object registrySecurityObj, RegistryOptions registryOptions) at Microsoft.Win32.RegistryKey.CreateSubKey(String subkey) at LoadAppKeyAndModify.Program.Main(String[] args) on Win7 x64, as 64-bit: INFO: Running as Admin in 64-bit process on 64-bit OS Unhandled Exception: System.UnauthorizedAccessException: Access to the registry key '\Microsoft\Windows\CurrentVersion\RunOnceEx\43bc857d-7d07-499c-8070-574d6732c130' is denied. at Microsoft.Win32.RegistryKey.Win32Error(Int32 errorCode, String str) at Microsoft.Win32.RegistryKey.CreateSubKeyInternal(String subkey, RegistryKeyPermissionCheck permissionCheck, Object registrySecurityObj, RegistryOptions registryOptions) at Microsoft.Win32.RegistryKey.CreateSubKey(String subkey, RegistryKeyPermissionCheck permissionCheck) at LoadAppKeyAndModify.Program.Main(String[] args) source: class Program { static void Main(string[] args) { Console.WriteLine("INFO: Running as {0} in {1}-bit process on {2}-bit OS", new WindowsPrincipal(WindowsIdentity.GetCurrent()).IsInRole(WindowsBuiltInRole.Administrator) ? "Admin" : "Normal User", Environment.Is64BitProcess ? 64 : 32, Environment.Is64BitOperatingSystem ? 64 : 32); if (args.Length != 1) { throw new ApplicationException("Need 1 argument - path to the software hive file on disk"); } string softwareHiveFile = Path.GetFullPath(args[0]); if (File.Exists(softwareHiveFile) == false) { throw new ApplicationException("Specified file does not exist: " + softwareHiveFile); } // pick a random subkey so it doesn't already exist var keyPathToCreate = "Microsoft\\Windows\\CurrentVersion\\RunOnceEx\\" + Guid.NewGuid(); var hKey = RegistryNativeMethods.RegLoadAppKey(softwareHiveFile); using (var safeRegistryHandle = new SafeRegistryHandle(new IntPtr(hKey), true)) using (var appKey = RegistryKey.FromHandle(safeRegistryHandle)) using (var runOnceExKey = appKey.CreateSubKey(keyPathToCreate)) { runOnceExKey.SetValue("foo", "bar"); Console.WriteLine("Was able to create {0} and write a value under it", keyPathToCreate); } } } internal static class RegistryNativeMethods { [Flags] public enum RegSAM { AllAccess = 0x000f003f } private const int REG_PROCESS_APPKEY = 0x00000001; // approximated from pinvoke.net's RegLoadKey and RegOpenKey // NOTE: changed return from long to int so we could do Win32Exception on it [DllImport("advapi32.dll", SetLastError = true)] private static extern int RegLoadAppKey(String hiveFile, out int hKey, RegSAM samDesired, int options, int reserved); public static int RegLoadAppKey(String hiveFile) { int hKey; int rc = RegLoadAppKey(hiveFile, out hKey, RegSAM.AllAccess, REG_PROCESS_APPKEY, 0); if (rc != 0) { throw new Win32Exception(rc, "Failed during RegLoadAppKey of file " + hiveFile); } return hKey; } }

    Read the article

  • SQL Server 2008: FileStream Insertion Failure w/ .NET 3.5SP1

    - by James Alexander
    I've configured a db w/ a FileStream group and have a table w/ File type on it. When attempting to insert a streamed file and after I create the table row, my query to read the filepath out and the buffer returns a null file path. I can't seem to figure out why though. Here is the table creation script: /****** Object: Table [dbo].[JobInstanceFile] Script Date: 03/22/2010 18:05:36 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON GO CREATE TABLE [dbo].[JobInstanceFile]( [JobInstanceFileId] [int] IDENTITY(1,1) NOT NULL, [JobInstanceId] [int] NOT NULL, [File] [varbinary](max) FILESTREAM NULL, [FileId] [uniqueidentifier] ROWGUIDCOL NOT NULL, [Created] [datetime] NOT NULL, CONSTRAINT [PK_JobInstanceFile] PRIMARY KEY CLUSTERED ( [JobInstanceFileId] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] FILESTREAM_ON [JobInstanceFilesGroup], UNIQUE NONCLUSTERED ( [FileId] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] FILESTREAM_ON [JobInstanceFilesGroup] GO SET ANSI_PADDING OFF GO ALTER TABLE [dbo].[JobInstanceFile] ADD DEFAULT (newid()) FOR [FileId] GO Here's my proc I call to create the row before streaming the file: /****** Object: StoredProcedure [dbo].[JobInstanceFileCreate] Script Date: 03/22/2010 18:06:23 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO create proc [dbo].[JobInstanceFileCreate] @JobInstanceId int, @Created datetime as insert into JobInstanceFile (JobInstanceId, FileId, Created) values (@JobInstanceId, newid(), @Created) select scope_identity() GO And lastly, here's the code I'm using: public int CreateJobInstanceFile(int jobInstanceId, string filePath) { using (var connection = new SqlConnection(ConfigurationManager.ConnectionStrings["ConsumerMarketingStoreFiles"].ConnectionString)) using (var fileStream = new FileStream(filePath, FileMode.Open)) { connection.Open(); var tran = connection.BeginTransaction(IsolationLevel.ReadCommitted); try { //create the JobInstanceFile instance var command = new SqlCommand("JobInstanceFileCreate", connection) { Transaction = tran }; command.CommandType = CommandType.StoredProcedure; command.Parameters.AddWithValue("@JobInstanceId", jobInstanceId); command.Parameters.AddWithValue("@Created", DateTime.Now); int jobInstanceFileId = Convert.ToInt32(command.ExecuteScalar()); //read out the filestream transaction context to stream the file for storage command.CommandText = "select [File].PathName(), GET_FILESTREAM_TRANSACTION_CONTEXT() from JobInstanceFile where JobInstanceFileId = @JobInstanceFileId"; command.CommandType = CommandType.Text; command.Parameters.AddWithValue("@JobInstanceFileId", jobInstanceFileId); using (SqlDataReader dr = command.ExecuteReader()) { dr.Read(); //get the file path we're writing out to string writePath = dr.GetString(0); using (var writeStream = new SqlFileStream(writePath, (byte[])dr.GetValue(1), FileAccess.ReadWrite)) { //copy from one stream to another byte[] bytes = new byte[65536]; int numBytes; while ((numBytes = fileStream.Read(bytes, 0, 65536)) 0) writeStream.Write(bytes, 0, numBytes); } } tran.Commit(); return jobInstanceFileId; } catch (Exception e) { tran.Rollback(); throw e; } } } Can someone please let me know what I'm doing wrong. In the code, the following expression is returning null for the file path and shouldn't be: //get the file path we're writing out to string writePath = dr.GetString(0); The server is different then the computer the code is running on but the necessary shares appear to be in order and I have also run the following: EXEC sp_configure filestream_access_level, 2 Any help would be greatly appreciated. Thanks!

    Read the article

  • How to convert int to char in JSP expression language?

    - by james.bunt
    I need to display incremented single characters to denote footnotes in a table of data in a JSP. In Java I would normally have a char variable and just increment it, or convert an int to a char by casting it (e.g. (char)(i + 97) to convert a 0-based index to a-z). I can't figure out how to do this in expression language short of writing my own JSTL function. Does anyone know how to convert an int to char in EL? Or how to increment a char variable in EL? Or possibly even a better technique to do what I'm trying to do in JSP/EL? Example of what I need to be able to produce: a mydata b myotherdata ... a first footnote b second footnote

    Read the article

  • Finding edge and corner values of an image in matlab

    - by James
    Hi, this problem links to two other questions i've asked on here. I am tracing the outline of an image and plotting this to a dxf file. I would like to use the bwboundaries function to find the coordinates of the edges of the image, find the corner coordinates using the cornermetric function and then remove any edge coordinates that are not a corner. The important thing I need to be able to do is keep the order of the corner elements obtained from bwboundaries, so that the section traces properly. The dxf function I have that draws from the coordinates draws lines between coordinates that are next to each other, so the line has to be drawn "around" the section rather than straight between the corner points. The reason I am doing this is because there are less coordinates obtained this way, so it is easier to amend the dxf file (as there are less points to manipulate). The code I have so far is: %# Shape to be traced bw = zeros(200); bw(20:40,20:180) = 1; bw(20:180,90:110) = 1; bw(140:180,20:185) = 1; %# Boundary Finding Section [Boundary] = bwboundaries(bw); %Traces the boundary of each section figure, imshow(bw); hold on; colors=['b' 'g' 'r' 'c' 'm' 'y']; for k=1:length(Boundary) perim = Boundary{k}; %Obtains perimeter coordinates (as a 2D matrix) from the cell array cidx = mod(k,length(colors))+1;% Obtains colours for the plot plot(perim(:,2), perim(:,1),... colors(cidx),'LineWidth',2); end Coordmat = cell2mat(Boundary) %Converts the traced regions to a matrix X = Coordmat(:,1) Y = Coordmat(:,2) % This gives the edge coordinates in matrix form %% Corner Finding Section (from Jonas' answer to a previous question %# get corners cornerProbability = cornermetric(bw); cornerIdx = find(cornerProbability==max(cornerProbability(:))); %# Label the image. bwlabel puts 1 for the first feature, 2 for the second, etc. %# Since concave corners are placed just outside the feature, grow the features %# a little before labeling bw2 = imdilate(bw,ones(3)); labeledImage = bwlabel(bw2); %# read the feature number associated with the corner cornerLabels = labeledImage(cornerIdx); %# find all corners that are associated with feature 1 corners_1 = cornerIdx(cornerLabels==1) [Xcorners, Ycorners] = ind2sub(200,corners_1) % Convert subscripts The code I have is, to give a matrix Xfin for the final x coordinates (which are on the edge AND at a corner. Xfin = zeros(length(X),1) for i = Xcorners XFin(i) = Xcorners if i~= Xcorners XFin(i) = [] end end However, this does not work correctly, because the values in the solution are sorted into order, and only one of each value remains. As I said, I would like the corner elements to be in the same order as obtained from bwboundaries, to allow the image to trace properly. Thanks

    Read the article

  • ScatterViewItems Containing Surface Interactive Elements

    - by James Hay
    This is an age old problem of interactive elements inside interactive elements, but I want a ScatterViewItem to contain other surface interactive elements such as a SurfaceButton or SurfaceCheckBox. I've got all my elements in there and they react to taps etc. The problem is that I only get the normal ScatterView behavior once I click on an area that does not contain a control. Is there an elegant solution to allow dragging even when the contact is on a SurfaceButton or SurfaceCheckbox? e.g. <s:ScatterView > <Grid Width="200" Height="200"> <s:SurfaceButton /> </Grid> </s:ScatterView>

    Read the article

  • Facebook Oauth 2.0 Token errors

    - by James
    The user clicks the URL that is generated via the code below. $url = 'https://graph.facebook.com/oauth/authorize?' . http_build_query(array('client_id' => FACEBOOK_APP_ID, 'redirect_uri' => 'http://fb.example.com/facebook', 'scope' => 'publish_stream,email,offline_access,user_location,user_hometown', 'display' => 'page')); Upon granting access to the application, and redirecting to http://fb.example.com/facebook I grab the following URL using cURL. $url = 'http://graph.facebook.com/oauth/access_token?' . http_build_query(array('client_id' => FACEBOOK_APP_ID, 'client_secret' => FACEBOOK_SECRET, 'redirect_uri' => 'http://fb.example.com/facebook', 'code' => $params['code'])); This returns the error below that I receive when grabbing the above URL. { "error": { "type": "OAuthException", "message": "Error validating verification code." } } Any ideas? Really getting stuck on this.

    Read the article

  • Getting Data from WinForms ListView Control

    - by James
    I need to retrieve my data from a ListView control set up in Details mode with 5 columns. I tried using this code: MessageBox.Show(ManageList.SelectedItems(0).Text) And it works, but only for the first selected item (item 0). If I try this: MessageBox.Show(ManageList.SelectedItems(2).Text) I get this error: InvalidArgument=Value of '2' is not valid for 'index'. Parameter name: index I have no clue how I can fix this, any help? Edit: Sorry, should have said, I'm using Windows.Forms :)

    Read the article

  • Sphinx PHP search

    - by James
    I'm doing a Sphinx search but turning up some really weird results. Any help is appreciated. So for example if I type "50", I get: 50 Cent 50 Lions 50 Foot Wave, etc. This is great, but when I search "50 Ce", I get: Ryczace Dwudziestki Spisek Bernhard Gal Cowabunga Go-Go And other crazy results. Also when I search for "50 Cent", the correct result is at the top, but then random results below. Any ideas why? PHP code: $query = $_GET['query']; if (!empty($query)) { $sphinx->SetMatchMode(SPH_MATCH_ALL); $sphinx->AddQuery($query, 'artists'); $sphinx->AddQuery($query, 'variations'); $sphinx->SetFilter('name', array(3)); $sphinx->SetLimits(0, 10); $result = $sphinx->RunQueries(); echo '<pre>'; switch ($result) { case false: echo 'Query failed: ' . $sphinx->GetLastError() . "\n"; break; default: if ($sphinx->GetLastWarning()) { echo 'WARNING: ' . $sphinx->GetLastWarning() . "\n"; } if (is_array($result[0]['matches']) && count($result[0]['matches'])) { foreach ($result[0]['matches'] as $value => $info) { $artist = artistDetails($value); echo $artist['name'] . "\n"; } } } } Sphinx Index and Source: source artists { type = mysql sql_host = localhost sql_user = user sql_pass = pass sql_db = db sql_port = 3300 sql_query = \ SELECT \ id, name \ FROM artists; #UNIX_TIMESTAMP(time) #sql_attr_uint = group_id #sql_attr_timestamp = time sql_query_info = SELECT id,name FROM artists WHERE id=$id } index artists { source = artists path = /var/sphinx/artists docinfo = extern charset_type = utf-8 }

    Read the article

  • What is wrong with my PHP/MySQL code?

    - by James
    I am building a navigation menu which lists all my categories and subcategories. The problem is it returns only one of these and not all. I have the categories echoed inside the while loop so I'm not sure why it's only showing one result and not all: <?php $query = mysql_query("SELECT * FROM categories_parent"); while ($row = mysql_fetch_assoc($query)) { $id = $row['id']; $name = $row['name']; $slug = $row['slug']; $childStatus = $row['child_status']; // if has child categories if ($childStatus == "1") { echo "<li class='dir'><a href='category.php?slug=$slug'>$name</a>"; echo "<ul id='dropdown'>"; $query = mysql_query("SELECT * FROM categories_child WHERE parent=$id"); while ($row = mysql_fetch_assoc($query)) { $id = $row['id']; $name = $row['name']; $slug = $row['slug']; echo "<li><a href='category.php?slug=$slug'>$name</a></li>"; } echo "</ul>"; echo "</li>"; } // if singular parent else { echo "<li><a href='category.php?slug=$slug'>$name</a></li>"; } } ?> My database tables: -- -- Table structure for table `categories_child` -- CREATE TABLE IF NOT EXISTS `categories_child` ( `id` int(11) NOT NULL AUTO_INCREMENT, `name` varchar(1000) NOT NULL, `slug` varchar(1000) NOT NULL, `parent` int(11) NOT NULL, PRIMARY KEY (`id`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=139 ; -- -- Dumping data for table `categories_child` -- INSERT INTO `categories_child` (`id`, `name`, `slug`, `parent`) VALUES (138, 'Britney Spears', 'category/celiberties/britney-spears/', 137), (136, 'Tigers', 'category/animals/tigers/', 136), (137, 'Horses', 'category/animals/horses/', 136), (135, 'Lions', 'category/animals/lions/', 136); -- -- Table structure for table `categories_parent` -- CREATE TABLE IF NOT EXISTS `categories_parent` ( `id` int(11) NOT NULL AUTO_INCREMENT, `name` varchar(1000) NOT NULL, `slug` varchar(1000) NOT NULL, `child_status` int(1) NOT NULL DEFAULT '0', PRIMARY KEY (`id`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=139 ; -- -- Dumping data for table `categories_parent` -- INSERT INTO `categories_parent` (`id`, `name`, `slug`, `child_status`) VALUES (137, 'Celiberties', 'category/celiberties/', 1), (138, 'TV Shows', 'category/tv-shows/', 0), (136, 'Animals', 'category/animals/', 1);

    Read the article

< Previous Page | 48 49 50 51 52 53 54 55 56 57 58 59  | Next Page >